summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipv4: fix ipsec forward performance regressionYan, Zheng2011-10-241-7/+7
| | | | | | | | | | There is bug in commit 5e2b61f(ipv4: Remove flowi from struct rtable). It makes xfrm4_fill_dst() modify wrong data structure. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Reported-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* jme: fix irq storm after suspend/resumeClemens Buchacher2011-10-241-0/+6
| | | | | | | | | | | | | | | | | If the device is down during suspend/resume, interrupts are enabled without a registered interrupt handler, causing a storm of unhandled interrupts until the IRQ is disabled because "nobody cared". Instead, check that the device is up before touching it in the suspend/resume code. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=39112 Helped-by: Adrian Chadd <adrian@freebsd.org> Helped-by: Mohammed Shafi <shafi.wireless@gmail.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* route: fix ICMP redirect validationFlavio Leitner2011-10-241-5/+31
| | | | | | | | | | | | | | | | | The commit f39925dbde7788cfb96419c0f092b086aa325c0f (ipv4: Cache learned redirect information in inetpeer.) removed some ICMP packet validations which are required by RFC 1122, section 3.2.2.2: ... A Redirect message SHOULD be silently discarded if the new gateway address it specifies is not on the same connected (sub-) net through which the Redirect arrived [INTRO:2, Appendix A], or if the source of the Redirect is not the current first-hop gateway for the specified destination (see Section 3.3.1). Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: hold sock reference while processing tx timestampsRichard Cochran2011-10-243-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pair of functions, * skb_clone_tx_timestamp() * skb_complete_tx_timestamp() were designed to allow timestamping in PHY devices. The first function, called during the MAC driver's hard_xmit method, identifies PTP protocol packets, clones them, and gives them to the PHY device driver. The PHY driver may hold onto the packet and deliver it at a later time using the second function, which adds the packet to the socket's error queue. As pointed out by Johannes, nothing prevents the socket from disappearing while the cloned packet is sitting in the PHY driver awaiting a timestamp. This patch fixes the issue by taking a reference on the socket for each such packet. In addition, the comments regarding the usage of these function are expanded to highlight the rule that PHY drivers must use skb_complete_tx_timestamp() to release the packet, in order to release the socket reference, too. These functions first appeared in v2.6.36. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@vger.kernel.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: fix tigon3_dma_hwbug_workaround()Eric Dumazet2011-10-221-4/+4
| | | | | | | | | | | | | Ari got kernel panics using tg3 NIC, and bisected to 2669069aacc9 "tg3: enable transmit time stamping." This is because tigon3_dma_hwbug_workaround() might alloc a new skb and free the original. We panic when skb_tx_timestamp() is called on freed skb. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-mergeDavid S. Miller2011-10-201-1/+6
|\
| * batman-adv: correctly set the data field in the TT_REPONSE packetAntonio Quartulli2011-10-181-1/+4
| | | | | | | | | | | | | | | | | | | | In the TT_RESPONSE packet, the number of carried entries is not correctly set. This leads to a wrong interpretation of the packet payload on the receiver side causing random entries to be added to the global translation table. Therefore the latter gets always corrupted, triggering a table recovery all the time. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
| * batman-adv: fix tt_local_reset_flags() functionAntonio Quartulli2011-10-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently the counter of tt_local_entry structures (tt_local_num) is incremented each time the tt_local_reset_flags() is invoked causing the node to send wrong TT_REPONSE packets containing a copy of non-initialised memory thus corrupting other nodes global translation table and making higher level communication impossible. Reported-by: Junkeun Song <jun361@gmail.com> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Junkeun Song <jun361@gmail.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
* | ip_gre: dont increase dev->needed_headroom on a live deviceEric Dumazet2011-10-201-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems ip_gre is able to change dev->needed_headroom on the fly. Its is not legal unfortunately and triggers a BUG in raw_sendmsg() skb = sock_alloc_send_skb(sk, ... + LL_ALLOCATED_SPACE(rt->dst.dev) < another cpu change dev->needed_headromm (making it bigger) ... skb_reserve(skb, LL_RESERVED_SPACE(rt->dst.dev)); We end with LL_RESERVED_SPACE() being bigger than LL_ALLOCATED_SPACE() -> we crash later because skb head is exhausted. Bug introduced in commit 243aad83 in 2.6.34 (ip_gre: include route header_len in max_headroom calculation) Reported-by: Elmar Vonlanthen <evonlanthen@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Timo Teräs <timo.teras@iki.fi> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds2011-10-206-55/+37
|\ \ | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add alignment flag to PCI expansion resources sparc: Avoid calling sigprocmask() sparc: Use set_current_blocked() sparc32,leon: SRMMU MMU Table probe fix
| * | sparc: Add alignment flag to PCI expansion resourcesKjetil Oftedal2011-10-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently no type of alignment is specified for PCI expansion roms while parsing the openfirmware tree. This causes calls to pci_map_rom() to fail. IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in pci/probe.c, and has been verified to work with various cards on a ultra 10. Signed-off-By: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc: Avoid calling sigprocmask()David S. Miller2011-10-123-3/+3
| | | | | | | | | | | | | | | | | | Use set_current_blocked() instead. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc: Use set_current_blocked()Matt Fleming2011-10-123-49/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Cc: Oleg Nesterov <oleg@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32,leon: SRMMU MMU Table probe fixDaniel Hellstrom2011-10-072-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LEON MMU Model (SRMMU) does not implement MMu Table probing in hardware, instead it is implemented in software. However the software implementation does not return the PTE as it should which always results in INVALID entires and the PROM mappings are not inherited as they should during startup. The following patch removes the masking of the PTE. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2011-10-2028-155/+330
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fib_rules: fix unresolved_rules counting r8169: fix wrong eee setting for rlt8111evl r8169: fix driver shutdown WoL regression. ehea: Change maintainer to me pptp: pptp_rcv_core() misses pskb_may_pull() call tproxy: copy transparent flag when creating a time wait pptp: fix skb leak in pptp_xmit() bonding: use local function pointer of bond->recv_probe in bond_handle_frame smsc911x: Add support for SMSC LAN89218 tg3: negate USE_PHYLIB flag check netconsole: enable netconsole can make net_device refcnt incorrent bluetooth: Properly clone LSM attributes to newly created child connections l2tp: fix a potential skb leak in l2tp_xmit_skb() bridge: fix hang on removal of bridge via netlink x25: Prevent skb overreads when checking call user data x25: Handle undersized/fragmented skbs x25: Validate incoming call user data lengths udplite: fast-path computation of checksum coverage IPVS netns shutdown/startup dead-lock netfilter: nf_conntrack: fix event flooding in GRE protocol tracker
| * | | fib_rules: fix unresolved_rules countingYan, Zheng2011-10-191-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | we should decrease ops->unresolved_rules when deleting a unresolved rule. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | r8169: fix wrong eee setting for rlt8111evlhayeswang2011-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the wrong parameter for setting EEE for RTL8111E-VL. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | r8169: fix driver shutdown WoL regression.françois romieu2011-10-191-32/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to commit 92fc43b4159b518f5baae57301f26d770b0834c9 ("r8169: modify the flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on RxConfig bits which are needed for WOL on some versions of the hardware. As these bits were formerly set from the r81{0x, 68}_pll_power_down methods, factor them out for use in the driver shutdown (rtl_shutdown) handler. I favored __rtl8169_get_wol() -hardware state indication- over RTL_FEATURE_WOL as the latter has become a good candidate for removal. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Tested-by: Marc Ballarin <ballarin.marc@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ehea: Change maintainer to meThadeu Lima de Souza Cascardo2011-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Breno Leitao has passed the maintainership to me. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Breno Leitão <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | pptp: pptp_rcv_core() misses pskb_may_pull() callEric Dumazet2011-10-191-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e1000e uses paged frags, so any layer incorrectly pulling bytes from skb can trigger a BUG in skb_pull() [951.142737] [<ffffffff813d2f36>] skb_pull+0x15/0x17 [951.142737] [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp] [951.152725] [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105 [951.163558] [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp] [951.165092] [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre] [951.165092] [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1 [951.177599] [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1 [951.177599] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.177599] [<ffffffff81410996>] ip_local_deliver+0x51/0x55 [951.177599] [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e [951.177599] [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e [951.204898] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.214651] [<ffffffff81410bb5>] ip_rcv+0x21b/0x246 pptp_rcv_core() is a nice example of a function assuming everything it needs is available in skb head. Reported-by: Bradley Peterson <despite@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | tproxy: copy transparent flag when creating a time waitKOVACS Krisztian2011-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The transparent socket option setting was not copied to the time wait socket when an inet socket was being replaced by a time wait socket. This broke the --transparent option of the socket match and may have caused that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state were being dropped by the packet filter. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | pptp: fix skb leak in pptp_xmit()Eric Dumazet2011-10-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case we cant transmit skb, we must free it Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bonding: use local function pointer of bond->recv_probe in bond_handle_frameMitsuo Hayasaka2011-10-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bond->recv_probe is called in bond_handle_frame() when a packet is received, but bond_close() sets it to NULL. So, a panic occurs when both functions work in parallel. Why this happen: After null pointer check of bond->recv_probe, an sk_buff is duplicated and bond->recv_probe is called in bond_handle_frame. So, a panic occurs when bond_close() is called between the check and call of bond->recv_probe. Patch: This patch uses a local function pointer of bond->recv_probe in bond_handle_frame(). So, it can avoid the null pointer dereference. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | smsc911x: Add support for SMSC LAN89218Phil Edworthy2011-10-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | LAN89218 is register compatible with LAN911x. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | tg3: negate USE_PHYLIB flag checkJiri Pirko2011-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This results tg3_phy_fini->phy_disconnect is never called and when tg3 module is removed. In my case this resulted in panics in phy_state_machine calling function phydev->adjust_link. So correct this check. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | netconsole: enable netconsole can make net_device refcnt incorrentGao feng2011-10-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no check if netconsole is enabled current. so when exec echo 1 > enabled; the reference of net_device will increment always. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore2011-10-184-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | l2tp: fix a potential skb leak in l2tp_xmit_skb()Eric Dumazet2011-10-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bridge: fix hang on removal of bridge via netlinkstephen hemminger2011-10-183-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge branch 'nf' of git://1984.lsi.us.es/netDavid S. Miller2011-10-174-53/+89
| |\ \ \
| | * | | IPVS netns shutdown/startup dead-lockHans Schillstrom2011-10-123-51/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ip_vs_mutext is used by both netns shutdown code and startup and both implicit uses sk_lock-AF_INET mutex. cleanup CPU-1 startup CPU-2 ip_vs_dst_event() ip_vs_genl_set_cmd() sk_lock-AF_INET __ip_vs_mutex sk_lock-AF_INET __ip_vs_mutex * DEAD LOCK * A new mutex placed in ip_vs netns struct called sync_mutex is added. Comments from Julian and Simon added. This patch has been running for more than 3 month now and it seems to work. Ver. 3 IP_VS_SO_GET_DAEMON in do_ip_vs_get_ctl protected by sync_mutex instead of __ip_vs_mutex as sugested by Julian. Signed-off-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * | | netfilter: nf_conntrack: fix event flooding in GRE protocol trackerFlorian Westphal2011-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GRE connections cause ctnetlink event flood because the ASSURED event is set for every packet received. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | | | x25: Prevent skb overreads when checking call user dataMatthew Daley2011-10-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | x25_find_listener does not check that the amount of call user data given in the skb is big enough in per-socket comparisons, hence buffer overreads may occur. Fix this by adding a check. Signed-off-by: Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | x25: Handle undersized/fragmented skbsMatthew Daley2011-10-176-17/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are multiple locations in the X.25 packet layer where a skb is assumed to be of at least a certain size and that all its data is currently available at skb->data. These assumptions are not checked, hence buffer overreads may occur. Use pskb_may_pull to check these minimal size assumptions and ensure that data is available at skb->data when necessary, as well as use skb_copy_bits where needed. Signed-off-by: Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | x25: Validate incoming call user data lengthsMatthew Daley2011-10-172-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | X.25 call user data is being copied in its entirety from incoming messages without consideration to the size of the destination buffers, leading to possible buffer overflows. Validate incoming call user data lengths before these copies are performed. It appears this issue was noticed some time ago, however nothing seemed to come of it: see http://www.spinics.net/lists/linux-x25/msg00043.html and commit 8db09f26f912f7c90c764806e804b558da520d4f. Signed-off-by: Matthew Daley <mattjd@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | udplite: fast-path computation of checksum coverageGerrit Renker2011-10-171-32/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 903ab86d195cca295379699299c5fc10beba31c7 of 1 March this year ("udp: Add lockless transmit path") introduced a new fast TX path that broke the checksum coverage computation of UDP-lite, which so far depended on up->len (only set if the socket is locked and 0 in the fast path). Fixed by providing both fast- and slow-path computation of checksum coverage. The latter can be removed when UDP(-lite)v6 also uses a lockless transmit path. Reported-by: Thomas Volkert <thomas@homer-conferencing.com> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | mm: fix race between mremap and removing migration entryHugh Dickins2011-10-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't usually pay much attention to the stale "? " addresses in stack backtraces, but this lucky report from Pawel Sikora hints that mremap's move_ptes() has inadequate locking against page migration. 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page(): kernel BUG at include/linux/swapops.h:105! RIP: 0010:[<ffffffff81127b76>] [<ffffffff81127b76>] migration_entry_wait+0x156/0x160 [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0 [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120 [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310 [<ffffffff81102a31>] handle_mm_fault+0x181/0x310 [<ffffffff81106097>] ? vma_adjust+0x537/0x570 [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0 [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570 [<ffffffff81421d5f>] page_fault+0x1f/0x30 mremap's down_write of mmap_sem, together with i_mmap_mutex or lock, and pagetable locks, were good enough before page migration (with its requirement that every migration entry be found) came in, and enough while migration always held mmap_sem; but not enough nowadays, when there's memory hotremove and compaction. The danger is that move_ptes() lets a migration entry dodge around behind remove_migration_pte()'s back, so it's in the old location when looking at the new, then in the new location when looking at the old. Either mremap's move_ptes() must additionally take anon_vma lock(), or migration's remove_migration_pte() must stop peeking for is_swap_entry() before it takes pagetable lock. Consensus chooses the latter: we prefer to add overhead to migration than to mremapping, which gets used by JVMs and by exec stack setup. Reported-and-tested-by: Paweł Sikora <pluto@agmk.net> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linusLinus Torvalds2011-10-191-1/+1
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] videodev: fix a NULL pointer dereference in v4l2_device_release()
| * | | | | [media] videodev: fix a NULL pointer dereference in v4l2_device_release()Antonio Ospite2011-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change in 8280b66 does not cover the case when v4l2_dev is already NULL, fix that. With a Kinect sensor, seen as an USB camera using GSPCA in this context, a NULL pointer dereference BUG can be triggered by just unplugging the device after the camera driver has been loaded. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | | | | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2011-10-195-9/+36
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/atom: fix handling of FB scratch indices drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2) drm/radeon/kms/DCE4.1: ss is not supported on the internal pplls drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping ttm: Fix error-path using an uninitialized value
| * | | | | | drm/radeon/kms/atom: fix handling of FB scratch indicesAlex Deucher2011-10-192-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FB scratch indices are dword indices, but we were treating them as byte indices. As such, we were getting the wrong FB scratch data for non-0 indices. Fix the indices and guard the indexing against indices larger than the scratch allocation. Fixes memory corruption on some boards if data was written past the end of the FB scratch array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Dave Airlie <airlied@redhat.com> Tested-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP ↵Alex Deucher2011-10-181-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bridges (v2) Settings in this table reflect the physical panel/connector rather than the internal dig encoding. v2: fix typo for DRM_MODE_CONNECTOR_VGA case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon/kms/DCE4.1: ss is not supported on the internal ppllsAlex Deucher2011-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's handled via external clock. It should already be protected by the external ss flag, but add an explicit check just in case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mappingAlex Deucher2011-10-181-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | llano has fully routeable dig encoders similar to DCE3.2 while ontario has a hardcoded mapping similar to DCE4.0. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | ttm: Fix error-path using an uninitialized valueThomas Hellstrom2011-10-181-1/+1
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pointed out by Michel Daenzer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | | | | cputimer: Cure lock inversionPeter Zijlstra2011-10-181-3/+4
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a lock inversion between the cputimer->lock and rq->lock; notably the two callchains involved are: update_rlimit_cpu() sighand->siglock set_process_cpu_timer() cpu_timer_sample_group() thread_group_cputimer() cputimer->lock thread_group_cputime() task_sched_runtime() ->pi_lock rq->lock scheduler_tick() rq->lock task_tick_fair() update_curr() account_group_exec() cputimer->lock Where the first one is enabling a CLOCK_PROCESS_CPUTIME_ID timer, and the second one is keeping up-to-date. This problem was introduced by e8abccb7193 ("posix-cpu-timers: Cure SMP accounting oddities"). Cure the problem by removing the cputimer->lock and rq->lock nesting, this leaves concurrent enablers doing duplicate work, but the time wasted should be on the same order otherwise wasted spinning on the lock and the greater-than assignment filter should ensure we preserve monotonicity. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/1318928713.21167.4.camel@twins Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | | | Linux 3.1-rc10v3.1-rc10Linus Torvalds2011-10-171-1/+1
| | | | |
* | | | | Avoid using variable-length arrays in kernel/sys.cLinus Torvalds2011-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size is always valid, but variable-length arrays generate worse code for no good reason (unless the function happens to be inlined and the compiler sees the length for the simple constant it is). Also, there seems to be some code generation problem on POWER, where Henrik Bakken reports that register r28 can get corrupted under some subtle circumstances (interrupt happening at the wrong time?). That all indicates some seriously broken compiler issues, but since variable length arrays are bad regardless, there's little point in trying to chase it down. "Just don't do that, then". Reported-by: Henrik Grindal Bakken <henribak@cisco.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge branch 'fixes' of ↵Linus Torvalds2011-10-164-3/+11
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS ARM: 7122/1: localtimer: add header linux/errno.h explicitly ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9 ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES
| * | | | ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUSZoltan Devai2011-10-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is unneeded and causes an abort on the SPMP8000 platform. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zoltan Devai <zoss@devai.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud