diff options
Diffstat (limited to 'virt/kvm/arm/vgic/vgic-v3.c')
-rw-r--r-- | virt/kvm/arm/vgic/vgic-v3.c | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c new file mode 100644 index 000000000000..336a46115937 --- /dev/null +++ b/virt/kvm/arm/vgic/vgic-v3.c @@ -0,0 +1,330 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/irqchip/arm-gic-v3.h> +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <kvm/arm_vgic.h> +#include <asm/kvm_mmu.h> +#include <asm/kvm_asm.h> + +#include "vgic.h" + +void vgic_v3_process_maintenance(struct kvm_vcpu *vcpu) +{ + struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3; + u32 model = vcpu->kvm->arch.vgic.vgic_model; + + if (cpuif->vgic_misr & ICH_MISR_EOI) { + unsigned long eisr_bmap = cpuif->vgic_eisr; + int lr; + + for_each_set_bit(lr, &eisr_bmap, kvm_vgic_global_state.nr_lr) { + u32 intid; + u64 val = cpuif->vgic_lr[lr]; + + if (model == KVM_DEV_TYPE_ARM_VGIC_V3) + intid = val & ICH_LR_VIRTUAL_ID_MASK; + else + intid = val & GICH_LR_VIRTUALID; + + WARN_ON(cpuif->vgic_lr[lr] & ICH_LR_STATE); + + kvm_notify_acked_irq(vcpu->kvm, 0, + intid - VGIC_NR_PRIVATE_IRQS); + } + + /* + * In the next iterations of the vcpu loop, if we sync + * the vgic state after flushing it, but before + * entering the guest (this happens for pending + * signals and vmid rollovers), then make sure we + * don't pick up any old maintenance interrupts here. + */ + cpuif->vgic_eisr = 0; + } + + cpuif->vgic_hcr &= ~ICH_HCR_UIE; +} + +void vgic_v3_set_underflow(struct kvm_vcpu *vcpu) +{ + struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3; + + cpuif->vgic_hcr |= ICH_HCR_UIE; +} + +void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu) +{ + struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3; + u32 model = vcpu->kvm->arch.vgic.vgic_model; + int lr; + + for (lr = 0; lr < vcpu->arch.vgic_cpu.used_lrs; lr++) { + u64 val = cpuif->vgic_lr[lr]; + u32 intid; + struct vgic_irq *irq; + + if (model == KVM_DEV_TYPE_ARM_VGIC_V3) + intid = val & ICH_LR_VIRTUAL_ID_MASK; + else + intid = val & GICH_LR_VIRTUALID; + irq = vgic_get_irq(vcpu->kvm, vcpu, intid); + + spin_lock(&irq->irq_lock); + + /* Always preserve the active bit */ + irq->active = !!(val & ICH_LR_ACTIVE_BIT); + + /* Edge is the only case where we preserve the pending bit */ + if (irq->config == VGIC_CONFIG_EDGE && + (val & ICH_LR_PENDING_BIT)) { + irq->pending = true; + + if (vgic_irq_is_sgi(intid) && + model == KVM_DEV_TYPE_ARM_VGIC_V2) { + u32 cpuid = val & GICH_LR_PHYSID_CPUID; + + cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT; + irq->source |= (1 << cpuid); + } + } + + /* Clear soft pending state when level irqs have been acked */ + if (irq->config == VGIC_CONFIG_LEVEL && + !(val & ICH_LR_PENDING_BIT)) { + irq->soft_pending = false; + irq->pending = irq->line_level; + } + + spin_unlock(&irq->irq_lock); + } +} + +/* Requires the irq to be locked already */ +void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr) +{ + u32 model = vcpu->kvm->arch.vgic.vgic_model; + u64 val = irq->intid; + + if (irq->pending) { + val |= ICH_LR_PENDING_BIT; + + if (irq->config == VGIC_CONFIG_EDGE) + irq->pending = false; + + if (vgic_irq_is_sgi(irq->intid) && + model == KVM_DEV_TYPE_ARM_VGIC_V2) { + u32 src = ffs(irq->source); + + BUG_ON(!src); + val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT; + irq->source &= ~(1 << (src - 1)); + if (irq->source) + irq->pending = true; + } + } + + if (irq->active) + val |= ICH_LR_ACTIVE_BIT; + + if (irq->hw) { + val |= ICH_LR_HW; + val |= ((u64)irq->hwintid) << ICH_LR_PHYS_ID_SHIFT; + } else { + if (irq->config == VGIC_CONFIG_LEVEL) + val |= ICH_LR_EOI; + } + + /* + * We currently only support Group1 interrupts, which is a + * known defect. This needs to be addressed at some point. + */ + if (model == KVM_DEV_TYPE_ARM_VGIC_V3) + val |= ICH_LR_GROUP; + + val |= (u64)irq->priority << ICH_LR_PRIORITY_SHIFT; + + vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = val; +} + +void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr) +{ + vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = 0; +} + +void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) +{ + u32 vmcr; + + vmcr = (vmcrp->ctlr << ICH_VMCR_CTLR_SHIFT) & ICH_VMCR_CTLR_MASK; + vmcr |= (vmcrp->abpr << ICH_VMCR_BPR1_SHIFT) & ICH_VMCR_BPR1_MASK; + vmcr |= (vmcrp->bpr << ICH_VMCR_BPR0_SHIFT) & ICH_VMCR_BPR0_MASK; + vmcr |= (vmcrp->pmr << ICH_VMCR_PMR_SHIFT) & ICH_VMCR_PMR_MASK; + + vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr = vmcr; +} + +void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) +{ + u32 vmcr = vcpu->arch.vgic_cpu.vgic_v3.vgic_vmcr; + + vmcrp->ctlr = (vmcr & ICH_VMCR_CTLR_MASK) >> ICH_VMCR_CTLR_SHIFT; + vmcrp->abpr = (vmcr & ICH_VMCR_BPR1_MASK) >> ICH_VMCR_BPR1_SHIFT; + vmcrp->bpr = (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT; + vmcrp->pmr = (vmcr & ICH_VMCR_PMR_MASK) >> ICH_VMCR_PMR_SHIFT; +} + +void vgic_v3_enable(struct kvm_vcpu *vcpu) +{ + struct vgic_v3_cpu_if *vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3; + + /* + * By forcing VMCR to zero, the GIC will restore the binary + * points to their reset values. Anything else resets to zero + * anyway. + */ + vgic_v3->vgic_vmcr = 0; + vgic_v3->vgic_elrsr = ~0; + + /* + * If we are emulating a GICv3, we do it in an non-GICv2-compatible + * way, so we force SRE to 1 to demonstrate this to the guest. + * This goes with the spec allowing the value to be RAO/WI. + */ + if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) + vgic_v3->vgic_sre = ICC_SRE_EL1_SRE; + else + vgic_v3->vgic_sre = 0; + + /* Get the show on the road... */ + vgic_v3->vgic_hcr = ICH_HCR_EN; +} + +/* check for overlapping regions and for regions crossing the end of memory */ +static bool vgic_v3_check_base(struct kvm *kvm) +{ + struct vgic_dist *d = &kvm->arch.vgic; + gpa_t redist_size = KVM_VGIC_V3_REDIST_SIZE; + + redist_size *= atomic_read(&kvm->online_vcpus); + + if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE < d->vgic_dist_base) + return false; + if (d->vgic_redist_base + redist_size < d->vgic_redist_base) + return false; + + if (d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE <= d->vgic_redist_base) + return true; + if (d->vgic_redist_base + redist_size <= d->vgic_dist_base) + return true; + + return false; +} + +int vgic_v3_map_resources(struct kvm *kvm) +{ + int ret = 0; + struct vgic_dist *dist = &kvm->arch.vgic; + + if (vgic_ready(kvm)) + goto out; + + if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) || + IS_VGIC_ADDR_UNDEF(dist->vgic_redist_base)) { + kvm_err("Need to set vgic distributor addresses first\n"); + ret = -ENXIO; + goto out; + } + + if (!vgic_v3_check_base(kvm)) { + kvm_err("VGIC redist and dist frames overlap\n"); + ret = -EINVAL; + goto out; + } + + /* + * For a VGICv3 we require the userland to explicitly initialize + * the VGIC before we need to use it. + */ + if (!vgic_initialized(kvm)) { + ret = -EBUSY; + goto out; + } + + ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3); + if (ret) { + kvm_err("Unable to register VGICv3 dist MMIO regions\n"); + goto out; + } + + ret = vgic_register_redist_iodevs(kvm, dist->vgic_redist_base); + if (ret) { + kvm_err("Unable to register VGICv3 redist MMIO regions\n"); + goto out; + } + + dist->ready = true; + +out: + if (ret) + kvm_vgic_destroy(kvm); + return ret; +} + +/** + * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT + * @node: pointer to the DT node + * + * Returns 0 if a GICv3 has been found, returns an error code otherwise + */ +int vgic_v3_probe(const struct gic_kvm_info *info) +{ + u32 ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2); + + /* + * The ListRegs field is 5 bits, but there is a architectural + * maximum of 16 list registers. Just ignore bit 4... + */ + kvm_vgic_global_state.nr_lr = (ich_vtr_el2 & 0xf) + 1; + kvm_vgic_global_state.can_emulate_gicv2 = false; + + if (!info->vcpu.start) { + kvm_info("GICv3: no GICV resource entry\n"); + kvm_vgic_global_state.vcpu_base = 0; + } else if (!PAGE_ALIGNED(info->vcpu.start)) { + pr_warn("GICV physical address 0x%llx not page aligned\n", + (unsigned long long)info->vcpu.start); + kvm_vgic_global_state.vcpu_base = 0; + } else if (!PAGE_ALIGNED(resource_size(&info->vcpu))) { + pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n", + (unsigned long long)resource_size(&info->vcpu), + PAGE_SIZE); + kvm_vgic_global_state.vcpu_base = 0; + } else { + kvm_vgic_global_state.vcpu_base = info->vcpu.start; + kvm_vgic_global_state.can_emulate_gicv2 = true; + kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2); + kvm_info("vgic-v2@%llx\n", info->vcpu.start); + } + if (kvm_vgic_global_state.vcpu_base == 0) + kvm_info("disabling GICv2 emulation\n"); + kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V3); + + kvm_vgic_global_state.vctrl_base = NULL; + kvm_vgic_global_state.type = VGIC_V3; + kvm_vgic_global_state.max_gic_vcpus = VGIC_V3_MAX_CPUS; + + return 0; +} |