summaryrefslogtreecommitdiffstats
path: root/sound
diff options
context:
space:
mode:
Diffstat (limited to 'sound')
-rw-r--r--sound/pci/Kconfig4
-rw-r--r--sound/pci/oxygen/virtuoso.c20
-rw-r--r--sound/ppc/snd_ps3.c4
-rw-r--r--sound/soc/atmel/atmel-pcm.c2
-rw-r--r--sound/soc/fsl/mpc8610_hpcd.c18
-rw-r--r--sound/soc/soc-dapm.c3
-rw-r--r--sound/usb/usbquirks.h8
7 files changed, 35 insertions, 24 deletions
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 6e3a1848447c..82b9bddcdcd6 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -744,8 +744,8 @@ config SND_VIRTUOSO
select SND_OXYGEN_LIB
help
Say Y here to include support for sound cards based on the
- Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
- HDAV1.3 (Deluxe).
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
+ Support for the HDAV1.3 (Deluxe) is very experimental.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 98c6a8c65d81..18c7c91786bc 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -26,7 +26,7 @@
* SPI 0 -> 1st PCM1796 (front)
* SPI 1 -> 2nd PCM1796 (surround)
* SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back)
+ * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
*
* GPIO 2 -> M0 of CS5381
* GPIO 3 -> M1 of CS5381
@@ -207,6 +207,12 @@ static void xonar_gpio_changed(struct oxygen *chip);
static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
u8 reg, u8 value)
{
+ /*
+ * We don't want to do writes on SPI 4 because the EEPROM, which shares
+ * the same pin, might get confused and broken. We'd better take care
+ * that the driver works with the default register values ...
+ */
+#if 0
/* maps ALSA channel pair number to SPI output */
static const u8 codec_map[4] = {
0, 1, 2, 4
@@ -217,6 +223,7 @@ static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
(codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
(reg << 8) | value);
+#endif
}
static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -676,7 +683,7 @@ static void xonar_hdav_uart_input(struct oxygen *chip)
if (chip->uart_input_count >= 2 &&
chip->uart_input[chip->uart_input_count - 2] == 'O' &&
chip->uart_input[chip->uart_input_count - 1] == 'K') {
- printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:");
+ printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n");
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
chip->uart_input, chip->uart_input_count);
chip->uart_input_count = 0;
@@ -750,6 +757,9 @@ static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -12700, 100, 0);
static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
{
+ if (!strncmp(template->name, "Master Playback ", 16))
+ /* disable volume/mute because they would require SPI writes */
+ return 1;
if (!strncmp(template->name, "CD Capture ", 11))
/* CD in is actually connected to the video in pin */
template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -840,9 +850,8 @@ static const struct oxygen_model model_xonar_d2 = {
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
.misc_flags = OXYGEN_MISC_MIDI,
- .function_flags = OXYGEN_FUNCTION_SPI |
- OXYGEN_FUNCTION_ENABLE_SPI_4_5,
- .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ .function_flags = OXYGEN_FUNCTION_SPI,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
};
@@ -899,6 +908,7 @@ static const struct oxygen_model model_xonar_hdav = {
.dac_channels = 8,
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
+ .misc_flags = OXYGEN_MISC_MIDI,
.function_flags = OXYGEN_FUNCTION_2WIRE,
.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index 8f9e3859c37c..ff321110ec02 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -477,7 +477,7 @@ static int snd_ps3_pcm_prepare(struct snd_pcm_substream *substream)
card->dma_start_bus_addr[SND_PS3_CH_R] =
runtime->dma_addr + (runtime->dma_bytes / 2);
- pr_debug("%s: vaddr=%p bus=%#lx\n", __func__,
+ pr_debug("%s: vaddr=%p bus=%#llx\n", __func__,
card->dma_start_vaddr[SND_PS3_CH_L],
card->dma_start_bus_addr[SND_PS3_CH_L]);
@@ -1030,7 +1030,7 @@ static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
pr_info("%s: nullbuffer alloc failed\n", __func__);
goto clean_preallocate;
}
- pr_debug("%s: null vaddr=%p dma=%#lx\n", __func__,
+ pr_debug("%s: null vaddr=%p dma=%#llx\n", __func__,
the_card.null_buffer_start_vaddr,
the_card.null_buffer_start_dma_addr);
/* set default sample rate/word width */
diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
index 1fac5efd285b..3dcdc4e3cfa0 100644
--- a/sound/soc/atmel/atmel-pcm.c
+++ b/sound/soc/atmel/atmel-pcm.c
@@ -44,8 +44,6 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/hardware.h>
-
#include "atmel-pcm.h"
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index bcec3f60bad9..acf39a646b2f 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -183,16 +183,6 @@ static struct snd_soc_ops mpc8610_hpcd_ops = {
};
/**
- * mpc8610_hpcd_machine: ASoC machine data
- */
-static struct snd_soc_card mpc8610_hpcd_machine = {
- .probe = mpc8610_hpcd_machine_probe,
- .remove = mpc8610_hpcd_machine_remove,
- .name = "MPC8610 HPCD",
- .num_links = 1,
-};
-
-/**
* mpc8610_hpcd_probe: OF probe function for the fabric driver
*
* This function gets called when an SSI node is found in the device tree.
@@ -455,7 +445,11 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev,
machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */
machine_data->dai.ops = &mpc8610_hpcd_ops;
- mpc8610_hpcd_machine.dai_link = &machine_data->dai;
+ machine_data->machine.probe = mpc8610_hpcd_machine_probe;
+ machine_data->machine.remove = mpc8610_hpcd_machine_remove;
+ machine_data->machine.name = "MPC8610 HPCD";
+ machine_data->machine.num_links = 1;
+ machine_data->machine.dai_link = &machine_data->dai;
/* Allocate a new audio platform device structure */
sound_device = platform_device_alloc("soc-audio", -1);
@@ -465,7 +459,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev,
goto error;
}
- machine_data->sound_devdata.card = &mpc8610_hpcd_machine;
+ machine_data->sound_devdata.card = &machine_data->machine;
machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270;
machine_data->machine.platform = &fsl_soc_platform;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 493a4e8aa273..a2f1da8b4646 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -720,7 +720,8 @@ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
struct snd_soc_dapm_path *path;
int found = 0;
- if (widget->id != snd_soc_dapm_mux)
+ if (widget->id != snd_soc_dapm_mux &&
+ widget->id != snd_soc_dapm_value_mux)
return -ENODEV;
if (!snd_soc_test_bits(widget->codec, e->reg, mask, val))
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 92115755d98e..5d8ef09b9dcc 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -128,6 +128,14 @@
.bInterfaceClass = USB_CLASS_AUDIO,
.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
},
+{
+ USB_DEVICE(0x046d, 0x0990),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Logitech, Inc.",
+ .product_name = "QuickCam Pro 9000",
+ .ifnum = QUIRK_NO_INTERFACE
+ }
+},
/*
* Yamaha devices
OpenPOWER on IntegriCloud