diff options
Diffstat (limited to 'kernel/watchdog.c')
| -rw-r--r-- | kernel/watchdog.c | 289 |
1 files changed, 215 insertions, 74 deletions
diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 9a056f5bc02c..2316f50b07a4 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -24,8 +24,33 @@ #include <linux/kvm_para.h> #include <linux/perf_event.h> -int watchdog_user_enabled = 1; +/* + * The run state of the lockup detectors is controlled by the content of the + * 'watchdog_enabled' variable. Each lockup detector has its dedicated bit - + * bit 0 for the hard lockup detector and bit 1 for the soft lockup detector. + * + * 'watchdog_user_enabled', 'nmi_watchdog_enabled' and 'soft_watchdog_enabled' + * are variables that are only used as an 'interface' between the parameters + * in /proc/sys/kernel and the internal state bits in 'watchdog_enabled'. The + * 'watchdog_thresh' variable is handled differently because its value is not + * boolean, and the lockup detectors are 'suspended' while 'watchdog_thresh' + * is equal zero. + */ +#define NMI_WATCHDOG_ENABLED_BIT 0 +#define SOFT_WATCHDOG_ENABLED_BIT 1 +#define NMI_WATCHDOG_ENABLED (1 << NMI_WATCHDOG_ENABLED_BIT) +#define SOFT_WATCHDOG_ENABLED (1 << SOFT_WATCHDOG_ENABLED_BIT) + +#ifdef CONFIG_HARDLOCKUP_DETECTOR +static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED|NMI_WATCHDOG_ENABLED; +#else +static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED; +#endif +int __read_mostly nmi_watchdog_enabled; +int __read_mostly soft_watchdog_enabled; +int __read_mostly watchdog_user_enabled; int __read_mostly watchdog_thresh = 10; + #ifdef CONFIG_SMP int __read_mostly sysctl_softlockup_all_cpu_backtrace; #else @@ -58,8 +83,6 @@ static unsigned long soft_lockup_nmi_warn; #ifdef CONFIG_HARDLOCKUP_DETECTOR static int hardlockup_panic = CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE; - -static bool hardlockup_detector_enabled = true; /* * We may not want to enable hard lockup detection by default in all cases, * for example when running the kernel as a guest on a hypervisor. In these @@ -68,14 +91,9 @@ static bool hardlockup_detector_enabled = true; * kernel command line parameters are parsed, because otherwise it is not * possible to override this in hardlockup_panic_setup(). */ -void watchdog_enable_hardlockup_detector(bool val) -{ - hardlockup_detector_enabled = val; -} - -bool watchdog_hardlockup_detector_is_enabled(void) +void hardlockup_detector_disable(void) { - return hardlockup_detector_enabled; + watchdog_enabled &= ~NMI_WATCHDOG_ENABLED; } static int __init hardlockup_panic_setup(char *str) @@ -85,15 +103,9 @@ static int __init hardlockup_panic_setup(char *str) else if (!strncmp(str, "nopanic", 7)) hardlockup_panic = 0; else if (!strncmp(str, "0", 1)) - watchdog_user_enabled = 0; - else if (!strncmp(str, "1", 1) || !strncmp(str, "2", 1)) { - /* - * Setting 'nmi_watchdog=1' or 'nmi_watchdog=2' (legacy option) - * has the same effect. - */ - watchdog_user_enabled = 1; - watchdog_enable_hardlockup_detector(true); - } + watchdog_enabled &= ~NMI_WATCHDOG_ENABLED; + else if (!strncmp(str, "1", 1)) + watchdog_enabled |= NMI_WATCHDOG_ENABLED; return 1; } __setup("nmi_watchdog=", hardlockup_panic_setup); @@ -112,19 +124,18 @@ __setup("softlockup_panic=", softlockup_panic_setup); static int __init nowatchdog_setup(char *str) { - watchdog_user_enabled = 0; + watchdog_enabled = 0; return 1; } __setup("nowatchdog", nowatchdog_setup); -/* deprecated */ static int __init nosoftlockup_setup(char *str) { - watchdog_user_enabled = 0; + watchdog_enabled &= ~SOFT_WATCHDOG_ENABLED; return 1; } __setup("nosoftlockup", nosoftlockup_setup); -/* */ + #ifdef CONFIG_SMP static int __init softlockup_all_cpu_backtrace_setup(char *str) { @@ -239,10 +250,11 @@ static int is_softlockup(unsigned long touch_ts) { unsigned long now = get_timestamp(); - /* Warn about unreasonable delays: */ - if (time_after(now, touch_ts + get_softlockup_thresh())) - return now - touch_ts; - + if (watchdog_enabled & SOFT_WATCHDOG_ENABLED) { + /* Warn about unreasonable delays. */ + if (time_after(now, touch_ts + get_softlockup_thresh())) + return now - touch_ts; + } return 0; } @@ -477,6 +489,21 @@ static void watchdog(unsigned int cpu) __this_cpu_write(soft_lockup_hrtimer_cnt, __this_cpu_read(hrtimer_interrupts)); __touch_watchdog(); + + /* + * watchdog_nmi_enable() clears the NMI_WATCHDOG_ENABLED bit in the + * failure path. Check for failures that can occur asynchronously - + * for example, when CPUs are on-lined - and shut down the hardware + * perf event on each CPU accordingly. + * + * The only non-obvious place this bit can be cleared is through + * watchdog_nmi_enable(), so a pr_info() is placed there. Placing a + * pr_info here would be too noisy as it would result in a message + * every few seconds if the hardlockup was disabled but the softlockup + * enabled. + */ + if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) + watchdog_nmi_disable(cpu); } #ifdef CONFIG_HARDLOCKUP_DETECTOR @@ -492,14 +519,9 @@ static int watchdog_nmi_enable(unsigned int cpu) struct perf_event_attr *wd_attr; struct perf_event *event = per_cpu(watchdog_ev, cpu); - /* - * Some kernels need to default hard lockup detection to - * 'disabled', for example a guest on a hypervisor. - */ - if (!watchdog_hardlockup_detector_is_enabled()) { - event = ERR_PTR(-ENOENT); - goto handle_err; - } + /* nothing to do if the hard lockup detector is disabled */ + if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) + goto out; /* is it already setup and enabled? */ if (event && event->state > PERF_EVENT_STATE_OFF) @@ -515,7 +537,6 @@ static int watchdog_nmi_enable(unsigned int cpu) /* Try to register using hardware perf events */ event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL); -handle_err: /* save cpu0 error for future comparision */ if (cpu == 0 && IS_ERR(event)) cpu0_err = PTR_ERR(event); @@ -527,6 +548,18 @@ handle_err: goto out_save; } + /* + * Disable the hard lockup detector if _any_ CPU fails to set up + * set up the hardware perf event. The watchdog() function checks + * the NMI_WATCHDOG_ENABLED bit periodically. + * + * The barriers are for syncing up watchdog_enabled across all the + * cpus, as clear_bit() does not use barriers. + */ + smp_mb__before_atomic(); + clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled); + smp_mb__after_atomic(); + /* skip displaying the same error again */ if (cpu > 0 && (PTR_ERR(event) == cpu0_err)) return PTR_ERR(event); @@ -540,6 +573,9 @@ handle_err: else pr_err("disabled (cpu%i): unable to create perf event: %ld\n", cpu, PTR_ERR(event)); + + pr_info("Shutting down hard lockup detector on all cpus\n"); + return PTR_ERR(event); /* success path */ @@ -628,7 +664,7 @@ static void restart_watchdog_hrtimer(void *info) HRTIMER_MODE_REL_PINNED); } -static void update_timers(int cpu) +static void update_watchdog(int cpu) { /* * Make sure that perf event counter will adopt to a new @@ -643,17 +679,17 @@ static void update_timers(int cpu) watchdog_nmi_enable(cpu); } -static void update_timers_all_cpus(void) +static void update_watchdog_all_cpus(void) { int cpu; get_online_cpus(); for_each_online_cpu(cpu) - update_timers(cpu); + update_watchdog(cpu); put_online_cpus(); } -static int watchdog_enable_all_cpus(bool sample_period_changed) +static int watchdog_enable_all_cpus(void) { int err = 0; @@ -663,8 +699,12 @@ static int watchdog_enable_all_cpus(bool sample_period_changed) pr_err("Failed to create watchdog threads, disabled\n"); else watchdog_running = 1; - } else if (sample_period_changed) { - update_timers_all_cpus(); + } else { + /* + * Enable/disable the lockup detectors or + * change the sample period 'on the fly'. + */ + update_watchdog_all_cpus(); } return err; @@ -682,48 +722,149 @@ static void watchdog_disable_all_cpus(void) } /* - * proc handler for /proc/sys/kernel/nmi_watchdog,watchdog_thresh + * Update the run state of the lockup detectors. + */ +static int proc_watchdog_update(void) +{ + int err = 0; + + /* + * Watchdog threads won't be started if they are already active. + * The 'watchdog_running' variable in watchdog_*_all_cpus() takes + * care of this. If those threads are already active, the sample + * period will be updated and the lockup detectors will be enabled + * or disabled 'on the fly'. + */ + if (watchdog_enabled && watchdog_thresh) + err = watchdog_enable_all_cpus(); + else + watchdog_disable_all_cpus(); + + return err; + +} + +static DEFINE_MUTEX(watchdog_proc_mutex); + +/* + * common function for watchdog, nmi_watchdog and soft_watchdog parameter + * + * caller | table->data points to | 'which' contains the flag(s) + * -------------------|-----------------------|----------------------------- + * proc_watchdog | watchdog_user_enabled | NMI_WATCHDOG_ENABLED or'ed + * | | with SOFT_WATCHDOG_ENABLED + * -------------------|-----------------------|----------------------------- + * proc_nmi_watchdog | nmi_watchdog_enabled | NMI_WATCHDOG_ENABLED + * -------------------|-----------------------|----------------------------- + * proc_soft_watchdog | soft_watchdog_enabled | SOFT_WATCHDOG_ENABLED + */ +static int proc_watchdog_common(int which, struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int err, old, new; + int *watchdog_param = (int *)table->data; + + mutex_lock(&watchdog_proc_mutex); + + /* + * If the parameter is being read return the state of the corresponding + * bit(s) in 'watchdog_enabled', else update 'watchdog_enabled' and the + * run state of the lockup detectors. + */ + if (!write) { + *watchdog_param = (watchdog_enabled & which) != 0; + err = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + } else { + err = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + if (err) + goto out; + + /* + * There is a race window between fetching the current value + * from 'watchdog_enabled' and storing the new value. During + * this race window, watchdog_nmi_enable() can sneak in and + * clear the NMI_WATCHDOG_ENABLED bit in 'watchdog_enabled'. + * The 'cmpxchg' detects this race and the loop retries. + */ + do { + old = watchdog_enabled; + /* + * If the parameter value is not zero set the + * corresponding bit(s), else clear it(them). + */ + if (*watchdog_param) + new = old | which; + else + new = old & ~which; + } while (cmpxchg(&watchdog_enabled, old, new) != old); + + /* + * Update the run state of the lockup detectors. + * Restore 'watchdog_enabled' on failure. + */ + err = proc_watchdog_update(); + if (err) + watchdog_enabled = old; + } +out: + mutex_unlock(&watchdog_proc_mutex); + return err; +} + +/* + * /proc/sys/kernel/watchdog + */ +int proc_watchdog(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + return proc_watchdog_common(NMI_WATCHDOG_ENABLED|SOFT_WATCHDOG_ENABLED, + table, write, buffer, lenp, ppos); +} + +/* + * /proc/sys/kernel/nmi_watchdog */ +int proc_nmi_watchdog(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + return proc_watchdog_common(NMI_WATCHDOG_ENABLED, + table, write, buffer, lenp, ppos); +} + +/* + * /proc/sys/kernel/soft_watchdog + */ +int proc_soft_watchdog(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + return proc_watchdog_common(SOFT_WATCHDOG_ENABLED, + table, write, buffer, lenp, ppos); +} -int proc_dowatchdog(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, loff_t *ppos) +/* + * /proc/sys/kernel/watchdog_thresh + */ +int proc_watchdog_thresh(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) { - int err, old_thresh, old_enabled; - bool old_hardlockup; - static DEFINE_MUTEX(watchdog_proc_mutex); + int err, old; mutex_lock(&watchdog_proc_mutex); - old_thresh = ACCESS_ONCE(watchdog_thresh); - old_enabled = ACCESS_ONCE(watchdog_user_enabled); - old_hardlockup = watchdog_hardlockup_detector_is_enabled(); + old = ACCESS_ONCE(watchdog_thresh); err = proc_dointvec_minmax(table, write, buffer, lenp, ppos); + if (err || !write) goto out; - set_sample_period(); /* - * Watchdog threads shouldn't be enabled if they are - * disabled. The 'watchdog_running' variable check in - * watchdog_*_all_cpus() function takes care of this. + * Update the sample period. + * Restore 'watchdog_thresh' on failure. */ - if (watchdog_user_enabled && watchdog_thresh) { - /* - * Prevent a change in watchdog_thresh accidentally overriding - * the enablement of the hardlockup detector. - */ - if (watchdog_user_enabled != old_enabled) - watchdog_enable_hardlockup_detector(true); - err = watchdog_enable_all_cpus(old_thresh != watchdog_thresh); - } else - watchdog_disable_all_cpus(); - - /* Restore old values on failure */ - if (err) { - watchdog_thresh = old_thresh; - watchdog_user_enabled = old_enabled; - watchdog_enable_hardlockup_detector(old_hardlockup); - } + set_sample_period(); + err = proc_watchdog_update(); + if (err) + watchdog_thresh = old; out: mutex_unlock(&watchdog_proc_mutex); return err; @@ -734,6 +875,6 @@ void __init lockup_detector_init(void) { set_sample_period(); - if (watchdog_user_enabled) - watchdog_enable_all_cpus(false); + if (watchdog_enabled) + watchdog_enable_all_cpus(); } |
