diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/cm4000_cs.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/firewire-cdev.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/ip.h | 34 | ||||
| -rw-r--r-- | include/uapi/linux/nfc.h | 6 | ||||
| -rw-r--r-- | include/uapi/linux/pci_regs.h | 113 | ||||
| -rw-r--r-- | include/uapi/linux/pkt_sched.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/serial_core.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/snmp.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/usb/ch11.h | 11 |
9 files changed, 123 insertions, 61 deletions
diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h index bc51f77db918..1217f751a1bc 100644 --- a/include/uapi/linux/cm4000_cs.h +++ b/include/uapi/linux/cm4000_cs.h @@ -2,6 +2,7 @@ #define _UAPI_CM4000_H_ #include <linux/types.h> +#include <linux/ioctl.h> #define MAX_ATR 33 diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index d50036953497..1db453e4b550 100644 --- a/include/uapi/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h @@ -215,8 +215,8 @@ struct fw_cdev_event_request2 { * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets * without the interrupt bit set that the kernel's internal buffer for @header - * is about to overflow. (In the last case, kernels with ABI version < 5 drop - * header data up to the next interrupt packet.) + * is about to overflow. (In the last case, ABI versions < 5 drop header data + * up to the next interrupt packet.) * * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): * diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h index 6cf06bfd841b..2fee45bdec0a 100644 --- a/include/uapi/linux/ip.h +++ b/include/uapi/linux/ip.h @@ -133,4 +133,38 @@ struct ip_beet_phdr { __u8 reserved; }; +/* index values for the variables in ipv4_devconf */ +enum +{ + IPV4_DEVCONF_FORWARDING=1, + IPV4_DEVCONF_MC_FORWARDING, + IPV4_DEVCONF_PROXY_ARP, + IPV4_DEVCONF_ACCEPT_REDIRECTS, + IPV4_DEVCONF_SECURE_REDIRECTS, + IPV4_DEVCONF_SEND_REDIRECTS, + IPV4_DEVCONF_SHARED_MEDIA, + IPV4_DEVCONF_RP_FILTER, + IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE, + IPV4_DEVCONF_BOOTP_RELAY, + IPV4_DEVCONF_LOG_MARTIANS, + IPV4_DEVCONF_TAG, + IPV4_DEVCONF_ARPFILTER, + IPV4_DEVCONF_MEDIUM_ID, + IPV4_DEVCONF_NOXFRM, + IPV4_DEVCONF_NOPOLICY, + IPV4_DEVCONF_FORCE_IGMP_VERSION, + IPV4_DEVCONF_ARP_ANNOUNCE, + IPV4_DEVCONF_ARP_IGNORE, + IPV4_DEVCONF_PROMOTE_SECONDARIES, + IPV4_DEVCONF_ARP_ACCEPT, + IPV4_DEVCONF_ARP_NOTIFY, + IPV4_DEVCONF_ACCEPT_LOCAL, + IPV4_DEVCONF_SRC_VMARK, + IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, + __IPV4_DEVCONF_MAX +}; + +#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1) + #endif /* _UAPI_LINUX_IP_H */ diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index caed0f324d5f..8137dd8d2adf 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -69,8 +69,8 @@ * starting a poll from a device which has a secure element enabled means * we want to do SE based card emulation. * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. - * @NFC_CMD_FW_UPLOAD: Request to Load/flash firmware, or event to inform that - * some firmware was loaded + * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform + * that some firmware was loaded */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -94,7 +94,7 @@ enum nfc_commands { NFC_CMD_DISABLE_SE, NFC_CMD_LLC_SDREQ, NFC_EVENT_LLC_SDRES, - NFC_CMD_FW_UPLOAD, + NFC_CMD_FW_DOWNLOAD, NFC_EVENT_SE_ADDED, NFC_EVENT_SE_REMOVED, /* private: internal use only */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index c3cc01d474b0..baa7852468ef 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -421,24 +421,24 @@ #define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ -#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */ #define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ #define PCI_EXP_DEVCTL 8 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ @@ -454,16 +454,16 @@ #define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ #define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ #define PCI_EXP_DEVSTA 10 /* Device Status */ -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ -#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */ -#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ @@ -475,21 +475,21 @@ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ -#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ -#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */ #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ #define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ #define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ -#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */ #define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ #define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ #define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ #define PCI_EXP_LNKSTA 18 /* Link Status */ #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ -#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ #define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ #define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ @@ -534,44 +534,49 @@ #define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ #define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ #define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* - * Note that the following PCI Express 'Capability Structure' registers - * were introduced with 'Capability Version' 0x2 (v2). These registers - * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() - * to use these fields safely. + * The Device Capabilities 2, Device Status 2, Device Control 2, + * Link Capabilities 2, Link Status 2, Link Control 2, + * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers + * are only present on devices with PCIe Capability version 2. + * Use pcie_capability_read_word() and similar interfaces to use them + * safely. */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ -#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */ -#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */ -#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */ +#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */ +#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ +#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ +#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ -#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */ -#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */ -#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ -#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ -#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ +#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ +#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ +#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */ +#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ +#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ -#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */ -#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ +#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ +#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ +#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index dbd71b0c7d8c..09d62b9228ff 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -73,9 +73,17 @@ struct tc_estimator { #define TC_H_ROOT (0xFFFFFFFFU) #define TC_H_INGRESS (0xFFFFFFF1U) +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + struct tc_ratespec { unsigned char cell_log; - unsigned char __reserved; + __u8 linklayer; /* lower 4 bits */ unsigned short overhead; short cell_align; unsigned short mpu; diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 9119cc0977bf..e40ebe124ced 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -232,4 +232,7 @@ /* SH-SCI */ #define PORT_HSCIF 104 +/* ST ASC type numbers */ +#define PORT_ASC 105 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index af0a674cc677..a1356d3b54df 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -253,7 +253,7 @@ enum LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ LINUX_MIB_TCPFASTOPENCOOKIEREQD, /* TCPFastOpenCookieReqd */ LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */ - LINUX_MIB_LOWLATENCYRXPACKETS, /* LowLatencyRxPackets */ + LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */ __LINUX_MIB_MAX }; diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h index 7692dc69ccf7..331499d597fa 100644 --- a/include/uapi/linux/usb/ch11.h +++ b/include/uapi/linux/usb/ch11.h @@ -11,6 +11,17 @@ #include <linux/types.h> /* __u8 etc */ +/* This is arbitrary. + * From USB 2.0 spec Table 11-13, offset 7, a hub can + * have up to 255 ports. The most yet reported is 10. + * + * Current Wireless USB host hardware (Intel i1480 for example) allows + * up to 22 devices to connect. Upcoming hardware might raise that + * limit. Because the arrays need to add a bit for hub status data, we + * use 31, so plus one evens out to four bytes. + */ +#define USB_MAXCHILDREN 31 + /* * Hub request types */ |
