diff options
Diffstat (limited to 'include/linux/preempt.h')
-rw-r--r-- | include/linux/preempt.h | 111 |
1 files changed, 111 insertions, 0 deletions
diff --git a/include/linux/preempt.h b/include/linux/preempt.h index de83b4eb1642..8cc0338a5e9a 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -17,6 +17,117 @@ #include <asm/preempt.h> +/* + * We put the hardirq and softirq counter into the preemption + * counter. The bitmask has the following meaning: + * + * - bits 0-7 are the preemption count (max preemption depth: 256) + * - bits 8-15 are the softirq count (max # of softirqs: 256) + * + * The hardirq count could in theory be the same as the number of + * interrupts in the system, but we run all interrupt handlers with + * interrupts disabled, so we cannot have nesting interrupts. Though + * there are a few palaeontologic drivers which reenable interrupts in + * the handler, so we need more than one bit here. + * + * PREEMPT_MASK: 0x000000ff + * SOFTIRQ_MASK: 0x0000ff00 + * HARDIRQ_MASK: 0x000f0000 + * NMI_MASK: 0x00100000 + * PREEMPT_ACTIVE: 0x00200000 + */ +#define PREEMPT_BITS 8 +#define SOFTIRQ_BITS 8 +#define HARDIRQ_BITS 4 +#define NMI_BITS 1 + +#define PREEMPT_SHIFT 0 +#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS) +#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS) +#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS) + +#define __IRQ_MASK(x) ((1UL << (x))-1) + +#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT) +#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) +#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT) +#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT) + +#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT) +#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT) +#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT) +#define NMI_OFFSET (1UL << NMI_SHIFT) + +#define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET) + +#define PREEMPT_ACTIVE_BITS 1 +#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS) +#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT) + +#define hardirq_count() (preempt_count() & HARDIRQ_MASK) +#define softirq_count() (preempt_count() & SOFTIRQ_MASK) +#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \ + | NMI_MASK)) + +/* + * Are we doing bottom half or hardware interrupt processing? + * Are we in a softirq context? Interrupt context? + * in_softirq - Are we currently processing softirq or have bh disabled? + * in_serving_softirq - Are we currently processing softirq? + */ +#define in_irq() (hardirq_count()) +#define in_softirq() (softirq_count()) +#define in_interrupt() (irq_count()) +#define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET) + +/* + * Are we in NMI context? + */ +#define in_nmi() (preempt_count() & NMI_MASK) + +#if defined(CONFIG_PREEMPT_COUNT) +# define PREEMPT_CHECK_OFFSET 1 +#else +# define PREEMPT_CHECK_OFFSET 0 +#endif + +/* + * The preempt_count offset needed for things like: + * + * spin_lock_bh() + * + * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and + * softirqs, such that unlock sequences of: + * + * spin_unlock(); + * local_bh_enable(); + * + * Work as expected. + */ +#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET) + +/* + * Are we running in atomic context? WARNING: this macro cannot + * always detect atomic context; in particular, it cannot know about + * held spinlocks in non-preemptible kernels. Thus it should not be + * used in the general case to determine whether sleeping is possible. + * Do not use in_atomic() in driver code. + */ +#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0) + +/* + * Check whether we were atomic before we did preempt_disable(): + * (used by the scheduler, *after* releasing the kernel lock) + */ +#define in_atomic_preempt_off() \ + ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET) + +#ifdef CONFIG_PREEMPT_COUNT +# define preemptible() (preempt_count() == 0 && !irqs_disabled()) +#else +# define preemptible() 0 +#endif + #if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER) extern void preempt_count_add(int val); extern void preempt_count_sub(int val); |