diff options
Diffstat (limited to 'include/linux/platform_data')
52 files changed, 750 insertions, 261 deletions
diff --git a/include/linux/platform_data/ams-delta-fiq.h b/include/linux/platform_data/ams-delta-fiq.h new file mode 100644 index 000000000000..cf4589ccb720 --- /dev/null +++ b/include/linux/platform_data/ams-delta-fiq.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * include/linux/platform_data/ams-delta-fiq.h + * + * Taken from the original Amstrad modifications to fiq.h + * + * Copyright (c) 2004 Amstrad Plc + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_PLATFORM_DATA_AMS_DELTA_FIQ_H +#define __LINUX_PLATFORM_DATA_AMS_DELTA_FIQ_H + +/* + * These are the offsets from the beginning of the fiq_buffer. They are put here + * since the buffer and header need to be accessed by drivers servicing devices + * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. + */ +#define FIQ_MASK 0 +#define FIQ_STATE 1 +#define FIQ_KEYS_CNT 2 +#define FIQ_TAIL_OFFSET 3 +#define FIQ_HEAD_OFFSET 4 +#define FIQ_BUF_LEN 5 +#define FIQ_KEY 6 +#define FIQ_MISSED_KEYS 7 +#define FIQ_BUFFER_START 8 +#define FIQ_GPIO_INT_MASK 9 +#define FIQ_KEYS_HICNT 10 +#define FIQ_IRQ_PEND 11 +#define FIQ_SIR_CODE_L1 12 +#define IRQ_SIR_CODE_L2 13 + +#define FIQ_CNT_INT_00 14 +#define FIQ_CNT_INT_KEY 15 +#define FIQ_CNT_INT_MDM 16 +#define FIQ_CNT_INT_03 17 +#define FIQ_CNT_INT_HSW 18 +#define FIQ_CNT_INT_05 19 +#define FIQ_CNT_INT_06 20 +#define FIQ_CNT_INT_07 21 +#define FIQ_CNT_INT_08 22 +#define FIQ_CNT_INT_09 23 +#define FIQ_CNT_INT_10 24 +#define FIQ_CNT_INT_11 25 +#define FIQ_CNT_INT_12 26 +#define FIQ_CNT_INT_13 27 +#define FIQ_CNT_INT_14 28 +#define FIQ_CNT_INT_15 29 + +#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */ + +#endif diff --git a/include/linux/platform_data/b53.h b/include/linux/platform_data/b53.h index 69d279c0da96..8eaef2f2b691 100644 --- a/include/linux/platform_data/b53.h +++ b/include/linux/platform_data/b53.h @@ -20,8 +20,12 @@ #define __B53_H #include <linux/kernel.h> +#include <net/dsa.h> struct b53_platform_data { + /* Must be first such that dsa_register_switch() can access it */ + struct dsa_chip_data cd; + u32 chip_id; u16 enabled_ports; diff --git a/include/linux/platform_data/bt-nokia-h4p.h b/include/linux/platform_data/bt-nokia-h4p.h deleted file mode 100644 index 30d169dfadf3..000000000000 --- a/include/linux/platform_data/bt-nokia-h4p.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is part of Nokia H4P bluetooth driver - * - * Copyright (C) 2010 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - - -/** - * struct hci_h4p_platform data - hci_h4p Platform data structure - */ -struct hci_h4p_platform_data { - int chip_type; - int bt_sysclk; - unsigned int bt_wakeup_gpio; - unsigned int host_wakeup_gpio; - unsigned int reset_gpio; - int reset_gpio_shared; - unsigned int uart_irq; - phys_addr_t uart_base; - const char *uart_iclk; - const char *uart_fclk; - void (*set_pm_limits)(struct device *dev, bool set); -}; diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-st.h new file mode 100644 index 000000000000..7cdb6a402b35 --- /dev/null +++ b/include/linux/platform_data/clk-st.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: MIT */ +/* + * clock framework for AMD Stoney based clock + * + * Copyright 2018 Advanced Micro Devices, Inc. + */ + +#ifndef __CLK_ST_H +#define __CLK_ST_H + +#include <linux/compiler.h> + +struct st_clk_data { + void __iomem *base; +}; + +#endif /* __CLK_ST_H */ diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 85ad68f9206a..7fe80f1c7e08 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -79,6 +79,7 @@ struct davinci_mcasp_pdata { /* McASP specific fields */ int tdm_slots; u8 op_mode; + u8 dismod; u8 num_serializer; u8 *serial_dir; u8 version; diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 896cb71a382c..1a1d58ebffbf 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -49,6 +49,7 @@ struct dw_dma_slave { * @data_width: Maximum data width supported by hardware per AHB master * (in bytes, power of 2) * @multi_block: Multi block transfers supported by hardware per channel. + * @protctl: Protection control signals setting per channel. */ struct dw_dma_platform_data { unsigned int nr_channels; @@ -65,6 +66,11 @@ struct dw_dma_platform_data { unsigned char nr_masters; unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS]; +#define CHAN_PROTCTL_PRIVILEGED BIT(0) +#define CHAN_PROTCTL_BUFFERABLE BIT(1) +#define CHAN_PROTCTL_CACHEABLE BIT(2) +#define CHAN_PROTCTL_MASK GENMASK(2, 0) + unsigned char protctl; }; #endif /* _PLATFORM_DATA_DMA_DW_H */ diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h index f8f1f6b952a6..eb9805bb3fe8 100644 --- a/include/linux/platform_data/dma-ep93xx.h +++ b/include/linux/platform_data/dma-ep93xx.h @@ -85,7 +85,7 @@ static inline enum dma_transfer_direction ep93xx_dma_chan_direction(struct dma_chan *chan) { if (!ep93xx_dma_chan_is_m2p(chan)) - return DMA_NONE; + return DMA_TRANS_NONE; /* even channels are for TX, odd for RX */ return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; diff --git a/include/linux/platform_data/dma-mcf-edma.h b/include/linux/platform_data/dma-mcf-edma.h new file mode 100644 index 000000000000..d718ccfa3421 --- /dev/null +++ b/include/linux/platform_data/dma-mcf-edma.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Freescale eDMA platform data, ColdFire SoC's family. + * + * Copyright (c) 2017 Angelo Dureghello <angelo@sysam.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_PLATFORM_DATA_MCF_EDMA_H__ +#define __LINUX_PLATFORM_DATA_MCF_EDMA_H__ + +struct dma_slave_map; + +bool mcf_edma_filter_fn(struct dma_chan *chan, void *param); + +#define MCF_EDMA_FILTER_PARAM(ch) ((void *)ch) + +/** + * struct mcf_edma_platform_data - platform specific data for eDMA engine + * + * @ver The eDMA module version. + * @dma_channels The number of eDMA channels. + */ +struct mcf_edma_platform_data { + int dma_channels; + const struct dma_slave_map *slave_map; + int slavecnt; +}; + +#endif /* __LINUX_PLATFORM_DATA_MCF_EDMA_H__ */ diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h index 5c15a738e116..219bd79dabfc 100644 --- a/include/linux/platform_data/ehci-sh.h +++ b/include/linux/platform_data/ehci-sh.h @@ -1,21 +1,9 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * EHCI SuperH driver platform data * * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> * Copyright (C) 2012 Renesas Solutions Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __USB_EHCI_SH_H diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h index 90ae19ca828f..a93841bfb9f7 100644 --- a/include/linux/platform_data/gpio-davinci.h +++ b/include/linux/platform_data/gpio-davinci.h @@ -16,45 +16,14 @@ #ifndef __DAVINCI_GPIO_PLATFORM_H #define __DAVINCI_GPIO_PLATFORM_H -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm-generic/gpio.h> - -#define MAX_REGS_BANKS 5 - struct davinci_gpio_platform_data { + bool no_auto_base; + u32 base; u32 ngpio; u32 gpio_unbanked; }; -struct davinci_gpio_irq_data { - void __iomem *regs; - struct davinci_gpio_controller *chip; - int bank_num; -}; - -struct davinci_gpio_controller { - struct gpio_chip chip; - struct irq_domain *irq_domain; - /* Serialize access to GPIO registers */ - spinlock_t lock; - void __iomem *regs[MAX_REGS_BANKS]; - int gpio_unbanked; - unsigned int base_irq; - unsigned int base; -}; - -/* - * basic gpio routines - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - /* Convert GPIO signal to GPIO pin number */ #define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} #endif diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h index 2dc7f4a8ab09..419cfacb4b42 100644 --- a/include/linux/platform_data/gpio-dwapb.h +++ b/include/linux/platform_data/gpio-dwapb.h @@ -19,7 +19,8 @@ struct dwapb_port_property { unsigned int idx; unsigned int ngpio; unsigned int gpio_base; - unsigned int irq; + int irq[32]; + bool has_irq; bool irq_shared; }; diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index 8612855691b2..6d07eebb3f75 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -24,8 +24,10 @@ #ifndef __ASM_ARCH_OMAP_GPIO_H #define __ASM_ARCH_OMAP_GPIO_H +#ifndef __ASSEMBLER__ #include <linux/io.h> #include <linux/platform_device.h> +#endif #define OMAP1_MPUIO_BASE 0xfffb5000 @@ -157,6 +159,7 @@ #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) +#ifndef __ASSEMBLER__ struct omap_gpio_reg_offs { u16 revision; u16 direction; @@ -197,23 +200,14 @@ struct omap_gpio_platform_data { bool is_mpuio; /* whether the bank is of type MPUIO */ u32 non_wakeup_gpios; + u32 quirks; /* Version specific quirks mask */ + struct omap_gpio_reg_offs *regs; /* Return context loss count due to PM states changing */ int (*get_context_loss_count)(struct device *dev); }; -#if IS_BUILTIN(CONFIG_GPIO_OMAP) -extern void omap2_gpio_prepare_for_idle(int off_mode); -extern void omap2_gpio_resume_after_idle(void); -#else -static inline void omap2_gpio_prepare_for_idle(int off_mode) -{ -} - -static inline void omap2_gpio_resume_after_idle(void) -{ -} -#endif +#endif /* __ASSEMBLER__ */ #endif diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h deleted file mode 100644 index b10d11c9bb49..000000000000 --- a/include/linux/platform_data/gpio-ts5500.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * GPIO (DIO) header for Technologic Systems TS-5500 - * - * Copyright (c) 2012 Savoir-faire Linux Inc. - * Vivien Didelot <vivien.didelot@savoirfairelinux.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _PDATA_GPIO_TS5500_H -#define _PDATA_GPIO_TS5500_H - -/** - * struct ts5500_dio_platform_data - TS-5500 pin block configuration - * @base: The GPIO base number to use. - * @strap: The only pin connected to an interrupt in a block is input-only. - * If you need a bidirectional line which can trigger an IRQ, you - * may strap it with an in/out pin. This flag indicates this case. - */ -struct ts5500_dio_platform_data { - int base; - bool strap; -}; - -#endif /* _PDATA_GPIO_TS5500_H */ diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h index 73d9098ada2d..85da11916bd5 100644 --- a/include/linux/platform_data/hsmmc-omap.h +++ b/include/linux/platform_data/hsmmc-omap.h @@ -70,9 +70,6 @@ struct omap_hsmmc_platform_data { /* string specifying a particular variant of hardware */ char *version; - int gpio_cd; /* gpio (card detect) */ - int gpio_cod; /* gpio (cover detect) */ - int gpio_wp; /* gpio (write protect) */ /* if we have special card, init it using this callback */ void (*init_card)(struct mmc_card *card); diff --git a/include/linux/platform_data/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h new file mode 100644 index 000000000000..352c1426fd4d --- /dev/null +++ b/include/linux/platform_data/i2c-gpio.h @@ -0,0 +1,34 @@ +/* + * i2c-gpio interface to platform code + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _LINUX_I2C_GPIO_H +#define _LINUX_I2C_GPIO_H + +/** + * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio + * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz + * @timeout: clock stretching timeout in jiffies. If the slave keeps + * SCL low for longer than this, the transfer will time out. + * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin + * isn't actively driven high when setting the output value high. + * gpio_get_value() must return the actual pin state even if the + * pin is configured as an output. + * @scl_is_open_drain: SCL is set up as open drain. Same requirements + * as for sda_is_open_drain apply. + * @scl_is_output_only: SCL output drivers cannot be turned off. + */ +struct i2c_gpio_platform_data { + int udelay; + int timeout; + unsigned int sda_is_open_drain:1; + unsigned int scl_is_open_drain:1; + unsigned int scl_is_output_only:1; +}; + +#endif /* _LINUX_I2C_GPIO_H */ diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h index 1fb088239d12..c628bb5e1061 100644 --- a/include/linux/platform_data/i2c-hid.h +++ b/include/linux/platform_data/i2c-hid.h @@ -12,14 +12,13 @@ #ifndef __LINUX_I2C_HID_H #define __LINUX_I2C_HID_H +#include <linux/regulator/consumer.h> #include <linux/types.h> -struct regulator; - /** * struct i2chid_platform_data - used by hid over i2c implementation. * @hid_descriptor_address: i2c register where the HID descriptor is stored. - * @supply: regulator for powering on the device. + * @supplies: regulators for powering on the device. * @post_power_delay_ms: delay after powering on before device is usable. * * Note that it is the responsibility of the platform driver (or the acpi 5.0 @@ -35,7 +34,7 @@ struct regulator; */ struct i2c_hid_platform_data { u16 hid_descriptor_address; - struct regulator *supply; + struct regulator_bulk_data supplies[2]; int post_power_delay_ms; }; diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h new file mode 100644 index 000000000000..4406108201fe --- /dev/null +++ b/include/linux/platform_data/i2c-mux-gpio.h @@ -0,0 +1,43 @@ +/* + * i2c-mux-gpio interface to platform code + * + * Peter Korsgaard <peter.korsgaard@barco.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_I2C_MUX_GPIO_H +#define _LINUX_I2C_MUX_GPIO_H + +/* MUX has no specific idle mode */ +#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1) + +/** + * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio + * @parent: Parent I2C bus adapter number + * @base_nr: Base I2C bus number to number adapters from or zero for dynamic + * @values: Array of bitmasks of GPIO settings (low/high) for each + * position + * @n_values: Number of multiplexer positions (busses to instantiate) + * @classes: Optional I2C auto-detection classes + * @gpio_chip: Optional GPIO chip name; if set, GPIO pin numbers are given + * relative to the base GPIO number of that chip + * @gpios: Array of GPIO numbers used to control MUX + * @n_gpios: Number of GPIOs used to control MUX + * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used + */ +struct i2c_mux_gpio_platform_data { + int parent; + int base_nr; + const unsigned *values; + int n_values; + const unsigned *classes; + char *gpio_chip; + const unsigned *gpios; + int n_gpios; + unsigned idle; +}; + +#endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h new file mode 100644 index 000000000000..113d6b12f650 --- /dev/null +++ b/include/linux/platform_data/i2c-ocores.h @@ -0,0 +1,23 @@ +/* + * i2c-ocores.h - definitions for the i2c-ocores interface + * + * Peter Korsgaard <peter@korsgaard.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _LINUX_I2C_OCORES_H +#define _LINUX_I2C_OCORES_H + +struct ocores_i2c_platform_data { + u32 reg_shift; /* register offset shift value */ + u32 reg_io_width; /* register io read/write width */ + u32 clock_khz; /* input clock in kHz */ + bool big_endian; /* registers are big endian */ + u8 num_devices; /* number of devices in the devices list */ + struct i2c_board_info const *devices; /* devices connected to the bus */ +}; + +#endif /* _LINUX_I2C_OCORES_H */ diff --git a/include/linux/platform_data/i2c-omap.h b/include/linux/platform_data/i2c-omap.h new file mode 100644 index 000000000000..3444265ee8ee --- /dev/null +++ b/include/linux/platform_data/i2c-omap.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __I2C_OMAP_H__ +#define __I2C_OMAP_H__ + +#include <linux/platform_device.h> + +/* + * Version 2 of the I2C peripheral unit has a different register + * layout and extra registers. The ID register in the V2 peripheral + * unit on the OMAP4430 reports the same ID as the V1 peripheral + * unit on the OMAP3530, so we must inform the driver which IP + * version we know it is running on from platform / cpu-specific + * code using these constants in the hwmod class definition. + */ + +#define OMAP_I2C_IP_VERSION_1 1 +#define OMAP_I2C_IP_VERSION_2 2 + +/* struct omap_i2c_bus_platform_data .flags meanings */ + +#define OMAP_I2C_FLAG_NO_FIFO BIT(0) +#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1) +#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2) +#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5) +#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6) +/* how the CPU address bus must be translated for I2C unit access */ +#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0 +#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7) +#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8) +#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7 + +struct omap_i2c_bus_platform_data { + u32 clkrate; + u32 rev; + u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); +}; + +#endif diff --git a/include/linux/platform_data/i2c-pca-platform.h b/include/linux/platform_data/i2c-pca-platform.h new file mode 100644 index 000000000000..c37329432a8e --- /dev/null +++ b/include/linux/platform_data/i2c-pca-platform.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef I2C_PCA9564_PLATFORM_H +#define I2C_PCA9564_PLATFORM_H + +struct i2c_pca9564_pf_platform_data { + int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */ + int timeout; /* timeout in jiffies */ +}; + +#endif /* I2C_PCA9564_PLATFORM_H */ diff --git a/include/linux/platform_data/i2c-xiic.h b/include/linux/platform_data/i2c-xiic.h new file mode 100644 index 000000000000..4f9f2256a97e --- /dev/null +++ b/include/linux/platform_data/i2c-xiic.h @@ -0,0 +1,43 @@ +/* + * i2c-xiic.h + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Xilinx IIC + */ + +#ifndef _LINUX_I2C_XIIC_H +#define _LINUX_I2C_XIIC_H + +/** + * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver + * @num_devices: Number of devices that shall be added when the driver + * is probed. + * @devices: The actuall devices to add. + * + * This purpose of this platform data struct is to be able to provide a number + * of devices that should be added to the I2C bus. The reason is that sometimes + * the I2C board info is not enough, a new PCI board can for instance be + * plugged into a standard PC, and the bus number might be unknown at + * early init time. + */ +struct xiic_i2c_platform_data { + u8 num_devices; + struct i2c_board_info const *devices; +}; + +#endif /* _LINUX_I2C_XIIC_H */ diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9abc0ca7259b..9f0aa1b48c78 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -1,7 +1,7 @@ /* * Driver for Texas Instruments INA219, INA226 power monitor chips * - * Copyright (C) 2012 Lothar Felten <l-felten@ti.com> + * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/platform_data/jz4740/jz4740_nand.h b/include/linux/platform_data/jz4740/jz4740_nand.h new file mode 100644 index 000000000000..bc571f6d5ced --- /dev/null +++ b/include/linux/platform_data/jz4740/jz4740_nand.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * JZ4740 SoC NAND controller driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __JZ4740_NAND_H__ +#define __JZ4740_NAND_H__ + +#include <linux/mtd/rawnand.h> +#include <linux/mtd/partitions.h> + +#define JZ_NAND_NUM_BANKS 4 + +struct jz_nand_platform_data { + int num_partitions; + struct mtd_partition *partitions; + + unsigned char banks[JZ_NAND_NUM_BANKS]; + + void (*ident_callback)(struct platform_device *, struct mtd_info *, + struct mtd_partition **, int *num_partitions); +}; + +#endif diff --git a/include/linux/platform_data/mdio-gpio.h b/include/linux/platform_data/mdio-gpio.h index 11f00cdabe3d..13874fa6e767 100644 --- a/include/linux/platform_data/mdio-gpio.h +++ b/include/linux/platform_data/mdio-gpio.h @@ -1,33 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* - * MDIO-GPIO bus platform data structures - * - * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * MDIO-GPIO bus platform data structure */ -#ifndef __LINUX_MDIO_GPIO_H -#define __LINUX_MDIO_GPIO_H - -#include <linux/mdio-bitbang.h> +#ifndef __LINUX_MDIO_GPIO_PDATA_H +#define __LINUX_MDIO_GPIO_PDATA_H struct mdio_gpio_platform_data { - /* GPIO numbers for bus pins */ - unsigned int mdc; - unsigned int mdio; - unsigned int mdo; - - bool mdc_active_low; - bool mdio_active_low; - bool mdo_active_low; - u32 phy_mask; u32 phy_ignore_ta_mask; - int irqs[PHY_MAX_ADDR]; - /* reset callback */ - int (*reset)(struct mii_bus *bus); }; -#endif /* __LINUX_MDIO_GPIO_H */ +#endif /* __LINUX_MDIO_GPIO_PDATA_H */ diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h deleted file mode 100644 index 9d127aa648e7..000000000000 --- a/include/linux/platform_data/media/ir-rx51.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _IR_RX51_H -#define _IR_RX51_H - -struct ir_rx51_platform_data { - int(*set_max_mpu_wakeup_lat)(struct device *dev, long t); -}; - -#endif diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h index 83804028115c..d2d3a443eedf 100644 --- a/include/linux/platform_data/media/mmp-camera.h +++ b/include/linux/platform_data/media/mmp-camera.h @@ -3,8 +3,27 @@ * Information for the Marvell Armada MMP camera */ +#include <media/v4l2-mediabus.h> + +enum dphy3_algo { + DPHY3_ALGO_DEFAULT = 0, + DPHY3_ALGO_PXA910, + DPHY3_ALGO_PXA2128 +}; + struct mmp_camera_platform_data { struct platform_device *i2c_device; int sensor_power_gpio; int sensor_reset_gpio; + enum v4l2_mbus_type bus_type; + int mclk_min; /* The minimal value of MCLK */ + int mclk_src; /* which clock source the MCLK derives from */ + int mclk_div; /* Clock Divider Value for MCLK */ + /* + * MIPI support + */ + int dphy[3]; /* DPHY: CSI2_DPHY3, CSI2_DPHY5, CSI2_DPHY6 */ + enum dphy3_algo dphy3_algo; /* algos for calculate CSI2_DPHY3 */ + int lane; /* ccic used lane number; 0 means DVP mode */ + int lane_clk; }; diff --git a/include/linux/platform_data/media/sii9234.h b/include/linux/platform_data/media/sii9234.h deleted file mode 100644 index 6a4a809fe9a3..000000000000 --- a/include/linux/platform_data/media/sii9234.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Driver header for SII9234 MHL converter chip. - * - * Copyright (c) 2011 Samsung Electronics, Co. Ltd - * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef SII9234_H -#define SII9234_H - -/** - * @gpio_n_reset: GPIO driving nRESET pin - */ - -struct sii9234_platform_data { - int gpio_n_reset; -}; - -#endif /* SII9234_H */ diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 2744cff1b297..19f5cb618c55 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -58,11 +58,10 @@ struct mlxreg_hotplug_device { * struct mlxreg_core_data - attributes control data: * * @label: attribute label; - * @label: attribute register offset; * @reg: attribute register; * @mask: attribute access mask; - * @mode: access mode; * @bit: attribute effective bit; + * @mode: access mode; * @np - pointer to node platform associated with attribute; * @hpdev - hotplug device data; * @health_cntr: dynamic device health indication counter; diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 7daa78a2f342..b606ca4197df 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -30,20 +30,14 @@ enum cd_types { * * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. * - * @wp_gpio: gpio for write_protect - * @cd_gpio: gpio for card_detect interrupt * @wp_type: type of write_protect method (see wp_types enum above) * @cd_type: type of card_detect method (see cd_types enum above) - * @support_vsel: indicate it supports 1.8v switching */ struct esdhc_platform_data { - unsigned int wp_gpio; - unsigned int cd_gpio; enum wp_types wp_type; enum cd_types cd_type; int max_bus_width; - bool support_vsel; unsigned int delay_line; unsigned int tuning_step; /* The delay cell steps in tuning procedure */ unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */ diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index 752f97c62ef2..7e44e84e7150 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -15,11 +15,7 @@ struct pxamci_platform_data { int (*get_ro)(struct device *); int (*setpower)(struct device *, unsigned int); void (*exit)(struct device *, void *); - int gpio_card_detect; /* gpio detecting card insertion */ - int gpio_card_ro; /* gpio detecting read only toggle */ bool gpio_card_ro_invert; /* gpio ro is inverted */ - int gpio_power; /* gpio powering up MMC bus */ - bool gpio_power_invert; /* gpio power is inverted */ }; extern void pxa_set_mci_info(struct pxamci_platform_data *info); diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h index b68d9f0bdd9e..33310b11cbdd 100644 --- a/include/linux/platform_data/mmc-s3cmci.h +++ b/include/linux/platform_data/mmc-s3cmci.h @@ -7,7 +7,6 @@ * @no_wprotect: Set this to indicate there is no write-protect switch. * @no_detect: Set this if there is no detect switch. * @wprotect_invert: Invert the default sense of the write protect switch. - * @detect_invert: Invert the default sense of the write protect switch. * @use_dma: Set to allow the use of DMA. * @gpio_detect: GPIO number for the card detect line. * @gpio_wprotect: GPIO number for the write protect line. @@ -31,11 +30,8 @@ struct s3c24xx_mci_pdata { unsigned int no_wprotect:1; unsigned int no_detect:1; unsigned int wprotect_invert:1; - unsigned int detect_invert:1; /* set => detect active high */ unsigned int use_dma:1; - unsigned int gpio_detect; - unsigned int gpio_wprotect; unsigned long ocr_avail; void (*set_power)(unsigned char power_mode, unsigned short vdd); diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h index d1397c8ed94e..6397b9c8149a 100644 --- a/include/linux/platform_data/mmp_dma.h +++ b/include/linux/platform_data/mmp_dma.h @@ -12,9 +12,13 @@ #ifndef MMP_DMA_H #define MMP_DMA_H +struct dma_slave_map; + struct mmp_dma_platdata { int dma_channels; int nb_requestors; + int slave_map_cnt; + const struct dma_slave_map *slave_map; }; #endif /* MMP_DMA_H */ diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h index 97948ac2bb9b..a403dd51dacc 100644 --- a/include/linux/platform_data/mtd-davinci-aemif.h +++ b/include/linux/platform_data/mtd-davinci-aemif.h @@ -33,5 +33,4 @@ struct davinci_aemif_timing { u8 ta; }; -int davinci_aemif_setup(struct platform_device *pdev); #endif diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h index f1a2cf655bdb..1bbfa27cccb4 100644 --- a/include/linux/platform_data/mtd-davinci.h +++ b/include/linux/platform_data/mtd-davinci.h @@ -56,6 +56,16 @@ struct davinci_nand_pdata { /* platform_data */ uint32_t mask_ale; uint32_t mask_cle; + /* + * 0-indexed chip-select number of the asynchronous + * interface to which the NAND device has been connected. + * + * So, if you have NAND connected to CS3 of DA850, you + * will pass '1' here. Since the asynchronous interface + * on DA850 starts from CS2. + */ + uint32_t core_chipsel; + /* for packages using two chipselects */ uint32_t mask_chipsel; diff --git a/include/linux/platform_data/mtd-orion_nand.h b/include/linux/platform_data/mtd-orion_nand.h index a7ce77c7c1a8..34828eb85982 100644 --- a/include/linux/platform_data/mtd-orion_nand.h +++ b/include/linux/platform_data/mtd-orion_nand.h @@ -12,7 +12,6 @@ */ struct orion_nand_data { struct mtd_partition *parts; - int (*dev_ready)(struct mtd_info *mtd); u32 nr_parts; u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ diff --git a/include/linux/platform_data/mv88e6xxx.h b/include/linux/platform_data/mv88e6xxx.h new file mode 100644 index 000000000000..f63af2955ea0 --- /dev/null +++ b/include/linux/platform_data/mv88e6xxx.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DSA_MV88E6XXX_H +#define __DSA_MV88E6XXX_H + +#include <net/dsa.h> + +struct dsa_mv88e6xxx_pdata { + /* Must be first, such that dsa_register_switch() can access this + * without gory pointer manipulations + */ + struct dsa_chip_data cd; + const char *compatible; + unsigned int enabled_ports; + struct net_device *netdev; + u32 eeprom_len; +}; + +#endif diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index 98b7925f1a2d..c0f624aca81c 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -48,6 +48,5 @@ struct mv_usb_platform_data { int (*phy_init)(void __iomem *regbase); void (*phy_deinit)(void __iomem *regbase); int (*set_vbus)(unsigned int vbus); - int (*private_init)(void __iomem *opregs, void __iomem *phyregs); }; #endif diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index 698d0d59db76..ee03d429742b 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -24,10 +24,11 @@ struct iio_channel; enum ntc_thermistor_type { - TYPE_NCPXXWB473, - TYPE_NCPXXWL333, TYPE_B57330V2103, + TYPE_B57891S0103, + TYPE_NCPXXWB473, TYPE_NCPXXWF104, + TYPE_NCPXXWL333, TYPE_NCPXXXH103, }; diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index f9bed2a0af9d..fbf5ed73c7cc 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -12,6 +12,29 @@ #include <linux/kbuild.h> #include <linux/types.h> +/* + * WFI Flags for sleep code control + * + * These flags allow PM code to exclude certain operations from happening + * in the low level ASM code found in sleep33xx.S and sleep43xx.S + * + * WFI_FLAG_FLUSH_CACHE: Flush the ARM caches and disable caching. Only + * needed when MPU will lose context. + * WFI_FLAG_SELF_REFRESH: Let EMIF place DDR memory into self-refresh and + * disable EMIF. + * WFI_FLAG_SAVE_EMIF: Save context of all EMIF registers and restore in + * resume path. Only needed if PER domain loses context + * and must also have WFI_FLAG_SELF_REFRESH set. + * WFI_FLAG_WAKE_M3: Disable MPU clock or clockdomain to cause wkup_m3 to + * execute when WFI instruction executes. + * WFI_FLAG_RTC_ONLY: Configure the RTC to enter RTC+DDR mode. + */ +#define WFI_FLAG_FLUSH_CACHE BIT(0) +#define WFI_FLAG_SELF_REFRESH BIT(1) +#define WFI_FLAG_SAVE_EMIF BIT(2) +#define WFI_FLAG_WAKE_M3 BIT(3) +#define WFI_FLAG_RTC_ONLY BIT(4) + #ifndef __ASSEMBLER__ struct am33xx_pm_sram_addr { void (*do_wfi)(void); @@ -19,12 +42,15 @@ struct am33xx_pm_sram_addr { unsigned long *resume_offset; unsigned long *emif_sram_table; unsigned long *ro_sram_data; + unsigned long resume_address; }; struct am33xx_pm_platform_data { int (*init)(void); - int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long)); + int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long), + unsigned long args); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); + void __iomem *(*get_rtc_base_addr)(void); }; struct am33xx_pm_sram_data { @@ -36,6 +62,7 @@ struct am33xx_pm_sram_data { struct am33xx_pm_ro_sram_data { u32 amx3_pm_sram_data_virt; u32 amx3_pm_sram_data_phys; + void __iomem *rtc_base_virt; } __packed __aligned(8); #endif /* __ASSEMBLER__ */ diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 9e20c2fb4ffd..4977c06d8a86 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -33,8 +33,6 @@ * 1: choose feedback clk + delay value * 2: choose internal clk * @clk_delay_enable: enable clk_delay or not, used on pxa910 - * @ext_cd_gpio: gpio pin used for external CD line - * @ext_cd_gpio_invert: invert values for external CD gpio line * @max_speed: the maximum speed supported * @host_caps: Standard MMC host capabilities bit field. * @quirks: quirks of platfrom @@ -46,8 +44,6 @@ struct sdhci_pxa_platdata { unsigned int clk_delay_cycles; unsigned int clk_delay_sel; bool clk_delay_enable; - unsigned int ext_cd_gpio; - bool ext_cd_gpio_invert; unsigned int max_speed; u32 host_caps; u32 host_caps2; diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h index 997b06634152..18602cab7799 100644 --- a/include/linux/platform_data/sc18is602.h +++ b/include/linux/platform_data/sc18is602.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/spi/sc18is602 file. + * For further information, see the Documentation/spi/spi-sc18is602 file. */ /** diff --git a/include/linux/platform_data/sh_ipmmu.h b/include/linux/platform_data/sh_ipmmu.h deleted file mode 100644 index 39f7405cdac5..000000000000 --- a/include/linux/platform_data/sh_ipmmu.h +++ /dev/null @@ -1,18 +0,0 @@ -/* sh_ipmmu.h - * - * Copyright (C) 2012 Hideki EIRAKU - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - */ - -#ifndef __SH_IPMMU_H__ -#define __SH_IPMMU_H__ - -struct shmobile_ipmmu_platform_data { - const char * const *dev_names; - unsigned int num_dev_names; -}; - -#endif /* __SH_IPMMU_H__ */ diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h index 7c686d335c12..fe815d7d9f58 100644 --- a/include/linux/platform_data/shmob_drm.h +++ b/include/linux/platform_data/shmob_drm.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * shmob_drm.h -- SH Mobile DRM driver * * Copyright (C) 2012 Renesas Corporation * * Laurent Pinchart (laurent.pinchart@ideasonboard.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __SHMOB_DRM_H__ @@ -18,9 +14,6 @@ #include <drm/drm_mode.h> -struct sh_mobile_meram_cfg; -struct sh_mobile_meram_info; - enum shmob_drm_clk_source { SHMOB_DRM_CLK_BUS, SHMOB_DRM_CLK_PERIPHERAL, @@ -93,7 +86,6 @@ struct shmob_drm_platform_data { struct shmob_drm_interface_data iface; struct shmob_drm_panel_data panel; struct shmob_drm_backlight_data backlight; - const struct sh_mobile_meram_cfg *meram; }; #endif /* __SHMOB_DRM_H__ */ diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h index f4edcb03c40c..0638fb6353bc 100644 --- a/include/linux/platform_data/spi-davinci.h +++ b/include/linux/platform_data/spi-davinci.h @@ -36,9 +36,6 @@ enum { * @num_chipselect: number of chipselects supported by this SPI master * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt * controller withn the SoC. Possible values are 0 and 1. - * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. - * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary - * to populate if all chip-selects are internal. * @cshold_bug: set this to true if the SPI controller on your chip requires * a write to CSHOLD bit in between transfers (like in DM355). * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any @@ -48,7 +45,6 @@ struct davinci_spi_platform_data { u8 version; u8 num_chipselect; u8 intr_line; - u8 *chip_sel; u8 prescaler_limit; bool cshold_bug; enum dma_event_q dma_event_q; diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h index 6f012fefa1a2..328f670d10bd 100644 --- a/include/linux/platform_data/spi-imx.h +++ b/include/linux/platform_data/spi-imx.h @@ -5,24 +5,29 @@ /* * struct spi_imx_master - device.platform_data for SPI controller devices. - * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio - * pins, numbers < 0 mean internal CSPI chipselects according - * to MXC_SPI_CS(). Normally you want to use gpio based chip - * selects as the CSPI module tries to be intelligent about - * when to assert the chipselect: The CSPI module deasserts the - * chipselect once it runs out of input data. The other problem - * is that it is not possible to mix between high active and low - * active chipselects on one single bus using the internal - * chipselects. Unfortunately Freescale decided to put some + * @chipselect: Array of chipselects for this master or NULL. Numbers >= 0 + * mean GPIO pins, -ENOENT means internal CSPI chipselect + * matching the position in the array. E.g., if chipselect[1] = + * -ENOENT then a SPI slave using chip select 1 will use the + * native SS1 line of the CSPI. Omitting the array will use + * all native chip selects. + + * Normally you want to use gpio based chip selects as the CSPI + * module tries to be intelligent about when to assert the + * chipselect: The CSPI module deasserts the chipselect once it + * runs out of input data. The other problem is that it is not + * possible to mix between high active and low active chipselects + * on one single bus using the internal chipselects. + * Unfortunately, on some SoCs, Freescale decided to put some * chipselects on dedicated pins which are not usable as gpios, * so we have to support the internal chipselects. - * @num_chipselect: ARRAY_SIZE(chipselect) + * + * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect), + * otherwise the number of native chip selects. */ struct spi_imx_master { int *chipselect; int num_chipselect; }; -#define MXC_SPI_CS(no) ((no) - 32) - #endif /* __MACH_SPI_H_*/ diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index f8274b0c6888..728193111c2f 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -18,11 +18,13 @@ * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. + * @pullups: enable/disable i2c controller pullup resistors. */ struct st_sensors_platform_data { u8 drdy_int_pin; bool open_drain; bool spi_3wire; + bool pullups; }; #endif /* ST_SENSORS_PDATA_H */ diff --git a/include/linux/platform_data/tda9950.h b/include/linux/platform_data/tda9950.h new file mode 100644 index 000000000000..c65efd461102 --- /dev/null +++ b/include/linux/platform_data/tda9950.h @@ -0,0 +1,16 @@ +#ifndef LINUX_PLATFORM_DATA_TDA9950_H +#define LINUX_PLATFORM_DATA_TDA9950_H + +struct device; + +struct tda9950_glue { + struct device *parent; + unsigned long irq_flags; + void *data; + int (*init)(void *); + void (*exit)(void *); + int (*open)(void *); + void (*release)(void *); +}; + +#endif diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h index ac72e115093c..e6407bafcbf8 100644 --- a/include/linux/platform_data/ti-aemif.h +++ b/include/linux/platform_data/ti-aemif.h @@ -16,8 +16,33 @@ #include <linux/of_platform.h> +/** + * struct aemif_abus_data - Async bus configuration parameters. + * + * @cs - Chip-select number. + */ +struct aemif_abus_data { + u32 cs; +}; + +/** + * struct aemif_platform_data - Data to set up the TI aemif driver. + * + * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif + * subdevices. + * @cs_offset: Lowest allowed chip-select number. + * @abus_data: Array of async bus configuration entries. + * @num_abus_data: Number of abus entries. + * @sub_devices: Array of platform subdevices. + * @num_sub_devices: Number of subdevices. + */ struct aemif_platform_data { struct of_dev_auxdata *dev_lookup; + u32 cs_offset; + struct aemif_abus_data *abus_data; + size_t num_abus_data; + struct platform_device *sub_devices; + size_t num_sub_devices; }; #endif /* __TI_DAVINCI_AEMIF_DATA_H__ */ diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 80ce28d40832..1ea3aab972b4 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -14,6 +14,7 @@ enum ti_sysc_module_type { TI_SYSC_OMAP4_SR, TI_SYSC_OMAP4_MCASP, TI_SYSC_OMAP4_USB_HOST_FS, + TI_SYSC_DRA7_MCAN, }; struct ti_sysc_cookie { diff --git a/include/linux/platform_data/tsl2772.h b/include/linux/platform_data/tsl2772.h new file mode 100644 index 000000000000..f8ade15a35e2 --- /dev/null +++ b/include/linux/platform_data/tsl2772.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Device driver for monitoring ambient light intensity (lux) + * and proximity (prox) within the TAOS TSL2772 family of devices. + * + * Copyright (c) 2012, TAOS Corporation. + * Copyright (c) 2017-2018 Brian Masney <masneyb@onstation.org> + */ + +#ifndef __TSL2772_H +#define __TSL2772_H + +struct tsl2772_lux { + unsigned int ch0; + unsigned int ch1; +}; + +/* Max number of segments allowable in LUX table */ +#define TSL2772_MAX_LUX_TABLE_SIZE 6 +/* The default LUX tables all have 3 elements. */ +#define TSL2772_DEF_LUX_TABLE_SZ 3 +#define TSL2772_DEFAULT_TABLE_BYTES (sizeof(struct tsl2772_lux) * \ + TSL2772_DEF_LUX_TABLE_SZ) + +/* Proximity diode to use */ +#define TSL2772_DIODE0 0x01 +#define TSL2772_DIODE1 0x02 +#define TSL2772_DIODE_BOTH 0x03 + +/* LED Power */ +#define TSL2772_100_mA 0x00 +#define TSL2772_50_mA 0x01 +#define TSL2772_25_mA 0x02 +#define TSL2772_13_mA 0x03 + +/** + * struct tsl2772_settings - Settings for the tsl2772 driver + * @als_time: Integration time of the ALS channel ADCs in 2.73 ms + * increments. Total integration time is + * (256 - als_time) * 2.73. + * @als_gain: Index into the tsl2772_als_gain array. + * @als_gain_trim: Default gain trim to account for aperture effects. + * @wait_time: Time between proximity and ALS cycles in 2.73 + * periods. + * @prox_time: Integration time of the proximity ADC in 2.73 ms + * increments. Total integration time is + * (256 - prx_time) * 2.73. + * @prox_gain: Index into the tsl2772_prx_gain array. + * @als_prox_config: The value of the ALS / Proximity configuration + * register. + * @als_cal_target: Known external ALS reading for calibration. + * @als_persistence: H/W Filters, Number of 'out of limits' ALS readings. + * @als_interrupt_en: Enable/Disable ALS interrupts + * @als_thresh_low: CH0 'low' count to trigger interrupt. + * @als_thresh_high: CH0 'high' count to trigger interrupt. + * @prox_persistence: H/W Filters, Number of 'out of limits' proximity + * readings. + * @prox_interrupt_en: Enable/Disable proximity interrupts. + * @prox_thres_low: Low threshold proximity detection. + * @prox_thres_high: High threshold proximity detection. + * @prox_pulse_count: Number if proximity emitter pulses. + * @prox_max_samples_cal: The number of samples that are taken when performing + * a proximity calibration. + * @prox_diode Which diode(s) to use for driving the external + * LED(s) for proximity sensing. + * @prox_power The amount of power to use for the external LED(s). + */ +struct tsl2772_settings { + int als_time; + int als_gain; + int als_gain_trim; + int wait_time; + int prox_time; + int prox_gain; + int als_prox_config; + int als_cal_target; + u8 als_persistence; + bool als_interrupt_en; + int als_thresh_low; + int als_thresh_high; + u8 prox_persistence; + bool prox_interrupt_en; + int prox_thres_low; + int prox_thres_high; + int prox_pulse_count; + int prox_max_samples_cal; + int prox_diode; + int prox_power; +}; + +/** + * struct tsl2772_platform_data - Platform callback, glass and defaults + * @platform_lux_table: Device specific glass coefficents + * @platform_default_settings: Device specific power on defaults + */ +struct tsl2772_platform_data { + struct tsl2772_lux platform_lux_table[TSL2772_MAX_LUX_TABLE_SIZE]; + struct tsl2772_settings *platform_default_settings; +}; + +#endif /* __TSL2772_H */ diff --git a/include/linux/platform_data/txx9/ndfmc.h b/include/linux/platform_data/txx9/ndfmc.h new file mode 100644 index 000000000000..fc172627d54e --- /dev/null +++ b/include/linux/platform_data/txx9/ndfmc.h @@ -0,0 +1,30 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (C) Copyright TOSHIBA CORPORATION 2007 + */ +#ifndef __TXX9_NDFMC_H +#define __TXX9_NDFMC_H + +#define NDFMC_PLAT_FLAG_USE_BSPRT 0x01 +#define NDFMC_PLAT_FLAG_NO_RSTR 0x02 +#define NDFMC_PLAT_FLAG_HOLDADD 0x04 +#define NDFMC_PLAT_FLAG_DUMMYWRITE 0x08 + +struct txx9ndfmc_platform_data { + unsigned int shift; + unsigned int gbus_clock; + unsigned int hold; /* hold time in nanosecond */ + unsigned int spw; /* strobe pulse width in nanosecond */ + unsigned int flags; + unsigned char ch_mask; /* available channel bitmask */ + unsigned char wp_mask; /* write-protect bitmask */ + unsigned char wide_mask; /* 16bit-nand bitmask */ +}; + +void txx9_ndfmc_init(unsigned long baseaddr, + const struct txx9ndfmc_platform_data *plat_data); + +#endif /* __TXX9_NDFMC_H */ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h new file mode 100644 index 000000000000..53dfc2541960 --- /dev/null +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_DATA_X86_ASUS_WMI_H +#define __PLATFORM_DATA_X86_ASUS_WMI_H + +#include <linux/errno.h> +#include <linux/types.h> + +/* WMI Methods */ +#define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ +#define ASUS_WMI_METHODID_SFBD 0x44424653 /* Set First Boot Device */ +#define ASUS_WMI_METHODID_GLCD 0x44434C47 /* Get LCD status */ +#define ASUS_WMI_METHODID_GPID 0x44495047 /* Get Panel ID?? (Resol) */ +#define ASUS_WMI_METHODID_QMOD 0x444F4D51 /* Quiet MODe */ +#define ASUS_WMI_METHODID_SPLV 0x4C425053 /* Set Panel Light Value */ +#define ASUS_WMI_METHODID_AGFN 0x4E464741 /* FaN? */ +#define ASUS_WMI_METHODID_SFUN 0x4E554653 /* FUNCtionalities */ +#define ASUS_WMI_METHODID_SDSP 0x50534453 /* Set DiSPlay output */ +#define ASUS_WMI_METHODID_GDSP 0x50534447 /* Get DiSPlay output */ +#define ASUS_WMI_METHODID_DEVP 0x50564544 /* DEVice Policy */ +#define ASUS_WMI_METHODID_OSVR 0x5256534F /* OS VeRsion */ +#define ASUS_WMI_METHODID_DSTS 0x53544344 /* Device STatuS */ +#define ASUS_WMI_METHODID_DSTS2 0x53545344 /* Device STatuS #2*/ +#define ASUS_WMI_METHODID_BSTS 0x53545342 /* Bios STatuS ? */ +#define ASUS_WMI_METHODID_DEVS 0x53564544 /* DEVice Set */ +#define ASUS_WMI_METHODID_CFVS 0x53564643 /* CPU Frequency Volt Set */ +#define ASUS_WMI_METHODID_KBFT 0x5446424B /* KeyBoard FilTer */ +#define ASUS_WMI_METHODID_INIT 0x54494E49 /* INITialize */ +#define ASUS_WMI_METHODID_HKEY 0x59454B48 /* Hot KEY ?? */ + +#define ASUS_WMI_UNSUPPORTED_METHOD 0xFFFFFFFE + +/* Wireless */ +#define ASUS_WMI_DEVID_HW_SWITCH 0x00010001 +#define ASUS_WMI_DEVID_WIRELESS_LED 0x00010002 +#define ASUS_WMI_DEVID_CWAP 0x00010003 +#define ASUS_WMI_DEVID_WLAN 0x00010011 +#define ASUS_WMI_DEVID_WLAN_LED 0x00010012 +#define ASUS_WMI_DEVID_BLUETOOTH 0x00010013 +#define ASUS_WMI_DEVID_GPS 0x00010015 +#define ASUS_WMI_DEVID_WIMAX 0x00010017 +#define ASUS_WMI_DEVID_WWAN3G 0x00010019 +#define ASUS_WMI_DEVID_UWB 0x00010021 + +/* Leds */ +/* 0x000200XX and 0x000400XX */ +#define ASUS_WMI_DEVID_LED1 0x00020011 +#define ASUS_WMI_DEVID_LED2 0x00020012 +#define ASUS_WMI_DEVID_LED3 0x00020013 +#define ASUS_WMI_DEVID_LED4 0x00020014 +#define ASUS_WMI_DEVID_LED5 0x00020015 +#define ASUS_WMI_DEVID_LED6 0x00020016 + +/* Backlight and Brightness */ +#define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */ +#define ASUS_WMI_DEVID_BACKLIGHT 0x00050011 +#define ASUS_WMI_DEVID_BRIGHTNESS 0x00050012 +#define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021 +#define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */ +#define ASUS_WMI_DEVID_LIGHTBAR 0x00050025 + +/* Misc */ +#define ASUS_WMI_DEVID_CAMERA 0x00060013 + +/* Storage */ +#define ASUS_WMI_DEVID_CARDREADER 0x00080013 + +/* Input */ +#define ASUS_WMI_DEVID_TOUCHPAD 0x00100011 +#define ASUS_WMI_DEVID_TOUCHPAD_LED 0x00100012 + +/* Fan, Thermal */ +#define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011 +#define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 + +/* Power */ +#define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012 + +/* Deep S3 / Resume on LID open */ +#define ASUS_WMI_DEVID_LID_RESUME 0x00120031 + +/* DSTS masks */ +#define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 +#define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 +#define ASUS_WMI_DSTS_PRESENCE_BIT 0x00010000 +#define ASUS_WMI_DSTS_USER_BIT 0x00020000 +#define ASUS_WMI_DSTS_BIOS_BIT 0x00040000 +#define ASUS_WMI_DSTS_BRIGHTNESS_MASK 0x000000FF +#define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00 +#define ASUS_WMI_DSTS_LIGHTBAR_MASK 0x0000000F + +#if IS_REACHABLE(CONFIG_ASUS_WMI) +int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval); +#else +static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, + u32 *retval) +{ + return -ENODEV; +} +#endif + +#endif /* __PLATFORM_DATA_X86_ASUS_WMI_H */ |
