diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 2 | ||||
| -rw-r--r-- | include/linux/mmc/core.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 26 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 2 | ||||
| -rw-r--r-- | include/linux/mmc/sdio_ids.h | 3 | ||||
| -rw-r--r-- | include/linux/mmc/slot-gpio.h | 5 |
6 files changed, 29 insertions, 10 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 279b39008a33..de7377815b6b 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -156,6 +156,7 @@ struct sd_switch_caps { #define UHS_DDR50_MAX_DTR 50000000 #define UHS_SDR25_MAX_DTR UHS_DDR50_MAX_DTR #define UHS_SDR12_MAX_DTR 25000000 +#define DEFAULT_SPEED_MAX_DTR UHS_SDR12_MAX_DTR unsigned int sd3_bus_mode; #define UHS_SDR12_BUS_SPEED 0 #define HIGH_SPEED_BUS_SPEED 1 @@ -252,6 +253,7 @@ struct mmc_card { #define MMC_TYPE_SD_COMBO 3 /* SD combo (IO+mem) card */ unsigned int state; /* (our) card state */ unsigned int quirks; /* card quirks */ + unsigned int quirk_max_rate; /* max rate set by quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ /* for byte mode */ diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 927519385482..134a6483347a 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -177,6 +177,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries); int mmc_hw_reset(struct mmc_host *host); +int mmc_sw_reset(struct mmc_host *host); void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); #endif /* LINUX_MMC_CORE_H */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 85146235231e..4d35ff36ceff 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -22,6 +22,7 @@ struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; + unsigned int power_delay_ms; /* waiting for stable power */ /* vdd stores the bit number of the selected voltage range from below. */ @@ -145,6 +146,16 @@ struct mmc_host_ops { /* Prepare HS400 target operating frequency depending host driver */ int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); + + /* Prepare switch to DDR during the HS400 init sequence */ + int (*hs400_prepare_ddr)(struct mmc_host *host); + + /* Prepare for switching from HS400 to HS200 */ + void (*hs400_downgrade)(struct mmc_host *host); + + /* Complete selection of HS400 */ + void (*hs400_complete)(struct mmc_host *host); + /* Prepare enhanced strobe depending host driver */ void (*hs400_enhanced_strobe)(struct mmc_host *host, struct mmc_ios *ios); @@ -320,7 +331,10 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ -/* (1 << 21) is free for reuse */ +#define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ + MMC_CAP_UHS_DDR50) +#define MMC_CAP_SYNC_RUNTIME_PM (1 << 21) /* Synced runtime PM suspends. */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ @@ -345,6 +359,7 @@ struct mmc_host { #define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ #define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ MMC_CAP2_HS400_1_2V) +#define MMC_CAP2_HSX00_1_8V (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V) #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ @@ -354,6 +369,7 @@ struct mmc_host { #define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */ #define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ +#define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -468,9 +484,6 @@ static inline void *mmc_priv(struct mmc_host *host) #define mmc_classdev(x) (&(x)->class_dev) #define mmc_hostname(x) (dev_name(&(x)->class_dev)) -int mmc_power_save_host(struct mmc_host *host); -int mmc_power_restore_host(struct mmc_host *host); - void mmc_detect_change(struct mmc_host *, unsigned long delay); void mmc_request_done(struct mmc_host *, struct mmc_request *); void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq); @@ -559,6 +572,11 @@ static inline bool mmc_can_retune(struct mmc_host *host) return host->can_retune == 1; } +static inline bool mmc_doing_retune(struct mmc_host *host) +{ + return host->doing_retune == 1; +} + static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) { return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 3ffc27aaeeaf..897a87c4c827 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -144,7 +144,7 @@ static inline bool mmc_op_multi(u32 opcode) #define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ #define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ #define R1_ERASE_RESET (1 << 13) /* sr, c */ -#define R1_STATUS(x) (x & 0xFFFFE000) +#define R1_STATUS(x) (x & 0xFFF9A000) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ #define R1_SWITCH_ERROR (1 << 7) /* sx, c */ diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index cdd66a5fbd5e..4332199c71c2 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -35,12 +35,14 @@ #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335 #define SDIO_DEVICE_ID_BROADCOM_4339 0x4339 #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962 +#define SDIO_DEVICE_ID_BROADCOM_43364 0xa9a4 #define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6 #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345 #define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354 #define SDIO_DEVICE_ID_BROADCOM_4356 0x4356 #define SDIO_DEVICE_ID_CYPRESS_4373 0x4373 +#define SDIO_DEVICE_ID_CYPRESS_43012 43012 #define SDIO_VENDOR_ID_INTEL 0x0089 #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 @@ -55,6 +57,7 @@ #define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 #define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 #define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128 +#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134 #define SDIO_VENDOR_ID_SIANO 0x039a #define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201 diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index 06607c59c4d0..feebd7aa6f5c 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -17,12 +17,7 @@ struct mmc_host; int mmc_gpio_get_ro(struct mmc_host *host); -int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio); - int mmc_gpio_get_cd(struct mmc_host *host); -int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio, - unsigned int debounce); - int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, unsigned int debounce, bool *gpio_invert); |
