diff options
Diffstat (limited to 'include/asm-arm')
116 files changed, 2719 insertions, 820 deletions
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h new file mode 100644 index 000000000000..0e9b7e18af05 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/aaec2000.h @@ -0,0 +1,151 @@ +/* + * linux/include/asm-arm/arch-aaec2000/aaec2000.h + * + * AAEC-2000 registers definition + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_AAEC2000_H +#define __ASM_ARCH_AAEC2000_H + +#ifndef __ASM_ARCH_HARDWARE_H +#error You must include hardware.h not this file +#endif /* __ASM_ARCH_HARDWARE_H */ + +/* Interrupt controller */ +#define IRQ_BASE __REG(0x80000500) +#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ +#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */ +#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */ +#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */ + +/* UART 1 */ +#define UART1_BASE __REG(0x80000600) +#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */ +#define UART1_LCR __REG(0x80000604) /* Link Control Register */ +#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */ +#define UART1_CR __REG(0x8000060c) /* Control Register */ +#define UART1_SR __REG(0x80000610) /* Status Register */ +#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */ +#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */ +#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */ + +/* UART 2 */ +#define UART2_BASE __REG(0x80000700) +#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */ +#define UART2_LCR __REG(0x80000704) /* Link Control Register */ +#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */ +#define UART2_CR __REG(0x8000070c) /* Control Register */ +#define UART2_SR __REG(0x80000710) /* Status Register */ +#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */ +#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */ +#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */ + +/* UART 3 */ +#define UART3_BASE __REG(0x80000800) +#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */ +#define UART3_LCR __REG(0x80000804) /* Link Control Register */ +#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */ +#define UART3_CR __REG(0x8000080c) /* Control Register */ +#define UART3_SR __REG(0x80000810) /* Status Register */ +#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */ +#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */ +#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */ + +/* These are used in some places */ +#define _UART1_BASE __PREG(UART1_BASE) +#define _UART2_BASE __PREG(UART2_BASE) +#define _UART3_BASE __PREG(UART3_BASE) + +/* UART Registers Offsets */ +#define UART_DR 0x00 +#define UART_LCR 0x04 +#define UART_BRCR 0x08 +#define UART_CR 0x0c +#define UART_SR 0x10 +#define UART_INT 0x14 +#define UART_INTM 0x18 +#define UART_INTRES 0x1c + +/* UART_LCR Bitmask */ +#define UART_LCR_BRK (1 << 0) /* Send Break */ +#define UART_LCR_PEN (1 << 1) /* Parity Enable */ +#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */ +#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */ +#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */ +#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */ +#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */ +#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */ +#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */ + +/* UART_CR Bitmask */ +#define UART_CR_EN (1 << 0) /* UART Enable */ +#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */ +#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */ +#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */ +#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */ +#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */ +#define UART_CR_LOOP (1 << 6) /* Loopback Mode */ + +/* UART_SR Bitmask */ +#define UART_SR_CTS (1 << 0) /* Clear To Send Status */ +#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */ +#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */ +#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */ +#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */ +#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */ +#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */ +#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */ + +/* UART_INT Bitmask */ +#define UART_INT_RIS (1 << 0) /* Rx Interrupt */ +#define UART_INT_TIS (1 << 1) /* Tx Interrupt */ +#define UART_INT_MIS (1 << 2) /* Modem Interrupt */ +#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */ + +/* Timer 1 */ +#define TIMER1_BASE __REG(0x80000c00) +#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */ +#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */ +#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */ +#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */ + +/* Timer 2 */ +#define TIMER2_BASE __REG(0x80000d00) +#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */ +#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */ +#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */ +#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */ + +/* Timer 3 */ +#define TIMER3_BASE __REG(0x80000e00) +#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */ +#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */ +#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */ +#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */ + +/* Timer Control register bits */ +#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start° Timer */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */ +#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */ +#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */ +#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/ + +/* Power and State Control */ +#define POWER_BASE __REG(0x80000400) +#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */ +#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */ +#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */ +#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */ +#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */ +#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */ +#define POWER_TEOI __REG(0x80000418) /* Tick EoI */ +#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ +#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ + +#endif /* __ARM_ARCH_AAEC2000_H */ diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S new file mode 100644 index 000000000000..e4f1fa539a74 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/debug-macro.S @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-aaec2000/debug-macro.S + * + * Debugging macro include header + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x80000000 @ physical + movne \rx, #io_p2v(0x80000000) @ virtual + orr \rx, \rx, #0x00000800 + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x10] + tst \rd, #(1 << 7) + beq 1002b + .endm + + .macro waituart,rd,rx +#if 0 +1001: ldr \rd, [\rx, #0x10] + tst \rd, #(1 << 5) + beq 1001b +#endif + .endm diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h new file mode 100644 index 000000000000..28c890b4a1d3 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/dma.h @@ -0,0 +1,17 @@ +/* + * linux/include/asm-arm/arch-aaec2000/dma.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#define MAX_DMA_ADDRESS 0xffffffff +#define MAX_DMA_CHANNELS 0 + +#endif diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S new file mode 100644 index 000000000000..df31313ab07e --- /dev/null +++ b/include/asm-arm/arch-aaec2000/entry-macro.S @@ -0,0 +1,33 @@ +/* + * linux/include/asm-arm/arch-aaec2000/entry-macro.S + * + * Low-level IRQ helper for aaec-2000 based platforms + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov r4, #0xf8000000 + add r4, r4, #0x00000500 + mov \base, r4 + ldr \irqstat, [\base, #0] + cmp \irqstat, #0 + bne 1001f + ldr \irqnr, =NR_IRQS+1 + b 1003f +1001: mov \irqnr, #0 +1002: ands \tmp, \irqstat, #1 + mov \irqstat, \irqstat, LSR #1 + add \irqnr, \irqnr, #1 + beq 1002b + sub \irqnr, \irqnr, #1 +1003: + .endm diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h new file mode 100644 index 000000000000..4c37219e030e --- /dev/null +++ b/include/asm-arm/arch-aaec2000/hardware.h @@ -0,0 +1,49 @@ +/* + * linux/include/asm-arm/arch-aaec2000/hardware.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <linux/config.h> + +/* The kernel is loaded at physical address 0xf8000000. + * We map the IO space a bit after + */ +#define PIO_APB_BASE 0x80000000 +#define VIO_APB_BASE 0xf8000000 +#define IO_APB_LENGTH 0x2000 +#define PIO_AHB_BASE 0x80002000 +#define VIO_AHB_BASE 0xf8002000 +#define IO_AHB_LENGTH 0x2000 + +#define VIO_BASE VIO_APB_BASE +#define PIO_BASE PIO_APB_BASE + +#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE ) +#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE ) + +#ifndef __ASSEMBLY__ + +#include <asm/types.h> + +/* FIXME: Is it needed to optimize this a la pxa ?? */ +#define __REG(x) (*((volatile u32 *)io_p2v(x))) +#define __PREG(x) (io_v2p((u32)&(x))) + +#else /* __ASSEMBLY__ */ + +#define __REG(x) io_p2v(x) +#define __PREG(x) io_v2p(x) + +#endif + +#include "aaec2000.h" + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h new file mode 100644 index 000000000000..c58a8d10425a --- /dev/null +++ b/include/asm-arm/arch-aaec2000/io.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-aaec2000/io.h + * + * Copied from asm/arch/sa1100/io.h + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h new file mode 100644 index 000000000000..de252220e806 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/irqs.h @@ -0,0 +1,46 @@ +/* + * linux/include/asm-arm/arch-aaec2000/irqs.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + + +#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */ +#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */ +#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */ +#define INT_MV_FIQ 3 /* Media Changed Interrupt */ +#define INT_SC 4 /* Sound Codec Interrupt */ +#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */ +#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */ +#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */ +#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */ +#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */ +#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */ +#define INT_TICK 11 /* 64Hz Tick Interrupt */ +#define INT_UART1 12 /* UART1 Interrupt */ +#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */ +#define INT_LCD 14 /* LCD Interrupt */ +#define INT_SSI 15 /* SSI End of Transfer Interrupt */ +#define INT_UART3 16 /* UART3 Interrupt */ +#define INT_SCI 17 /* SCI Interrupt */ +#define INT_AAC 18 /* Advanced Audio Codec Interrupt */ +#define INT_MMC 19 /* MMC Interrupt */ +#define INT_USB 20 /* USB Interrupt */ +#define INT_DMA 21 /* DMA Interrupt */ +#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */ +#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */ +#define INT_BMI 27 /* BMI Interrupt */ + +#define NR_IRQS (INT_BMI + 1) + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h new file mode 100644 index 000000000000..681b6a6171a1 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/memory.h @@ -0,0 +1,73 @@ +/* + * linux/include/asm-arm/arch-aaec2000/memory.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include <linux/config.h> + +#define PHYS_OFFSET (0xf0000000UL) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#ifdef CONFIG_DISCONTIGMEM + +/* + * The nodes are the followings: + * + * node 0: 0xf000.0000 - 0xf3ff.ffff + * node 1: 0xf400.0000 - 0xf7ff.ffff + * node 2: 0xf800.0000 - 0xfbff.ffff + * node 3: 0xfc00.0000 - 0xffff.ffff + */ + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(addr) \ + (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT) + +/* + * Given a page frame number, convert it to a node id. + */ +#define PFN_TO_NID(pfn) \ + (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT)) + +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and return the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) + +/* + * Given a page frame number, find the owning node of the memory + * and return the mem_map of that node. + */ +#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) + +/* + * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory + * and returns the index corresponding to the appropriate page in the + * node's mem_map. + */ +#define LOCAL_MAP_NR(addr) \ + (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT) + +#define NODE_MAX_MEM_SHIFT 26 +#define NODE_MAX_MEM_SIZE (1 << NODE_MAX_MEM_SHIFT) + +#else + +#define PFN_TO_NID(addr) (0) + +#endif /* CONFIG_DISCONTIGMEM */ + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-aaec2000/param.h b/include/asm-arm/arch-aaec2000/param.h new file mode 100644 index 000000000000..139936c2faf2 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/param.h @@ -0,0 +1,15 @@ +/* + * linux/include/asm-arm/arch-aaec2000/param.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_PARAM_H +#define __ASM_ARCH_PARAM_H + +#endif /* __ASM_ARCH_PARAM_H */ + diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h new file mode 100644 index 000000000000..08de97b407a8 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/system.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm-arm/arch-aaed2000/system.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + cpu_reset(0); +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h new file mode 100644 index 000000000000..f5708b38fb7f --- /dev/null +++ b/include/asm-arm/arch-aaec2000/timex.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-arm/arch-aaec2000/timex.h + * + * AAEC-2000 Architecture timex specification + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 508000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h new file mode 100644 index 000000000000..fff0c94b75c4 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/uncompress.h @@ -0,0 +1,47 @@ +/* + * linux/include/asm-arm/arch-aaec2000/uncompress.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include "hardware.h" + +#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) + +static void putstr( const char *s ) +{ + unsigned long serial_port; + do { + serial_port = _UART3_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + serial_port = _UART1_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + serial_port = _UART2_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + return; + } while (0); + + for (; *s; s++) { + /* wait for space in the UART's transmitter */ + while ((UART(UART_SR) & UART_SR_TxFF)); + /* send the character out. */ + UART(UART_DR) = *s; + /* if a LF, also do CR... */ + if (*s == 10) { + while ((UART(UART_SR) & UART_SR_TxFF)); + UART(UART_DR) = 13; + } + } +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h new file mode 100644 index 000000000000..ecb991e2e4ff --- /dev/null +++ b/include/asm-arm/arch-aaec2000/vmalloc.h @@ -0,0 +1,16 @@ +/* + * linux/include/asm-arm/arch-aaec2000/vmalloc.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-imx/imxfb.h b/include/asm-arm/arch-imx/imxfb.h index 2346d454ab9c..7dbc7bbba65d 100644 --- a/include/asm-arm/arch-imx/imxfb.h +++ b/include/asm-arm/arch-imx/imxfb.h @@ -25,6 +25,7 @@ struct imxfb_mach_info { u_int pcr; u_int pwmr; u_int lscr1; + u_int dmacr; u_char * fixed_screen_cpu; dma_addr_t fixed_screen_dma; diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h index bd364f5a99bc..96ad3d2a66d1 100644 --- a/include/asm-arm/arch-integrator/platform.h +++ b/include/asm-arm/arch-integrator/platform.h @@ -293,7 +293,11 @@ #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) +#if defined(CONFIG_ARCH_INTEGRATOR_AP) #define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ +#elif defined(CONFIG_ARCH_INTEGRATOR_CP) +#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ +#endif /* ------------------------------------------------------------------------ * KMI keyboard/mouse definitions diff --git a/include/asm-arm/arch-integrator/smp.h b/include/asm-arm/arch-integrator/smp.h new file mode 100644 index 000000000000..0ec7093f7c37 --- /dev/null +++ b/include/asm-arm/arch-integrator/smp.h @@ -0,0 +1,19 @@ +#ifndef ASMARM_ARCH_SMP_H +#define ASMARM_ARCH_SMP_H + +#include <linux/config.h> + +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +extern void secondary_scan_irqs(void); + +#endif diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h index 84634af5cc64..03cbbe1fd9d8 100644 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ b/include/asm-arm/arch-ixp2000/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-ixp2000/ixp2000-gpio.h + * include/asm-arm/arch-ixp2000/gpio.h * * Copyright (C) 2002 Intel Corporation. * @@ -16,26 +16,18 @@ * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) */ -#ifndef _ASM_ARCH_IXP2000_GPIO_H_ -#define _ASM_ARCH_IXP2000_GPIO_H_ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H #ifndef __ASSEMBLY__ -#define GPIO_OUT 0x0 -#define GPIO_IN 0x80 + +#define GPIO_IN 0 +#define GPIO_OUT 1 #define IXP2000_GPIO_LOW 0 #define IXP2000_GPIO_HIGH 1 -#define GPIO_NO_EDGES 0 -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 -#define GPIO_LEVEL_LOW 4 -#define GPIO_LEVEL_HIGH 8 - -extern void set_GPIO_IRQ_edge(int gpio_nr, int edge); -extern void set_GPIO_IRQ_level(int gpio_nr, int level); -extern void gpio_line_config(int line, int style); +extern void gpio_line_config(int line, int direction); static inline int gpio_line_get(int line) { @@ -45,11 +37,12 @@ static inline int gpio_line_get(int line) static inline void gpio_line_set(int line, int value) { if (value == IXP2000_GPIO_HIGH) { - ixp_reg_write(IXP2000_GPIO_POSR, BIT(line)); - } else if (value == IXP2000_GPIO_LOW) - ixp_reg_write(IXP2000_GPIO_POCR, BIT(line)); + ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); + } else if (value == IXP2000_GPIO_LOW) { + ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); + } } #endif /* !__ASSEMBLY__ */ -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ +#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index 083462668e18..3241cd6f0778 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -17,18 +17,23 @@ #define IO_SPACE_LIMIT 0xffffffff #define __mem_pci(a) (a) -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) /* - * The IXP2400 before revision B0 asserts byte lanes for PCI I/O + * The A? revisions of the IXP2000s assert byte lanes for PCI I/O * transactions the other way round (MEM transactions don't have this - * issue), so we need to override the standard functions. B0 and later - * have a bit that can be set to 1 to get the 'proper' behavior, but - * since that isn't available on the A? revisions we just keep doing - * things manually. + * issue), so if we want to support those models, we need to override + * the standard I/O functions. + * + * B0 and later have a bit that can be set to 1 to get the proper + * behavior for I/O transactions, which then allows us to use the + * standard I/O functions. This is what we do if the user does not + * explicitly ask for support for pre-B0. */ -#define alignb(addr) (void __iomem *)((unsigned long)addr ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)addr ^ 2) +#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO +#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) + +#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) +#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) #define outb(v,p) __raw_writeb((v),alignb(___io(p))) #define outw(v,p) __raw_writew((v),alignw(___io(p))) @@ -48,6 +53,81 @@ #define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) #define insl(p,d,l) __raw_readsl(___io(p),d,l) +#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) + +#define ioread8(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readb(alignb(p)); \ + } else { \ + __v = __raw_readb(p); \ + } \ + \ + __v; \ + }) \ + +#define ioread16(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readw(alignw(p)); \ + } else { \ + __v = le16_to_cpu(__raw_readw(p)); \ + } \ + \ + __v; \ + }) + +#define ioread32(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readl(p); \ + } else { \ + __v = le32_to_cpu(__raw_readl(p)); \ + } \ + \ + __v; \ + }) + +#define iowrite8(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writeb((v), alignb(p)); \ + } else { \ + __raw_writeb((v), p); \ + } \ + }) + +#define iowrite16(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writew((v), alignw(p)); \ + } else { \ + __raw_writew(cpu_to_le16(v), p); \ + } \ + }) + +#define iowrite32(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writel((v), p); \ + } else { \ + __raw_writel(cpu_to_le32(v), p); \ + } \ + }) + +#define ioport_map(port, nr) ___io(port) + +#define ioport_unmap(addr) +#else +#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) +#endif + #ifdef CONFIG_ARCH_IXDP2X01 /* diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h index 3a398dfbf125..229381c64283 100644 --- a/include/asm-arm/arch-ixp2000/ixdp2x00.h +++ b/include/asm-arm/arch-ixp2000/ixdp2x00.h @@ -21,8 +21,8 @@ * On board CPLD memory map */ #define IXDP2X00_PHYS_CPLD_BASE 0xc7000000 -#define IXDP2X00_VIRT_CPLD_BASE 0xfafff000 -#define IXDP2X00_CPLD_SIZE 0x00001000 +#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000 +#define IXDP2X00_CPLD_SIZE 0x00100000 #define IXDP2X00_CPLD_REG(x) \ diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h index b3a1bcda8d01..b768009c3a51 100644 --- a/include/asm-arm/arch-ixp2000/ixdp2x01.h +++ b/include/asm-arm/arch-ixp2000/ixdp2x01.h @@ -18,8 +18,8 @@ #define __IXDP2X01_H__ #define IXDP2X01_PHYS_CPLD_BASE 0xc6024000 -#define IXDP2X01_VIRT_CPLD_BASE 0xfafff000 -#define IXDP2X01_CPLD_REGION_SIZE 0x00001000 +#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000 +#define IXDP2X01_CPLD_REGION_SIZE 0x00100000 #define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg) #define IXDP2X01_CPLD_PHYS_REG(reg) (volatile u32*)(IXDP2X01_PHYS_CPLD_BASE | reg) diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index 6c56708d0ff0..75623f81ef75 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -18,6 +18,21 @@ #ifndef _IXP2000_REGS_H_ #define _IXP2000_REGS_H_ +/* + * IXP2000 linux memory map: + * + * virt phys size + * fb000000 db000000 16M PCI CFG1 + * fc000000 da000000 16M PCI CFG0 + * fd000000 d8000000 16M PCI I/O + * fe[0-7]00000 8M per-platform mappings + * feb00000 c8000000 1M MSF + * fec00000 df000000 1M PCI CSRs + * fed00000 de000000 1M PCI CREG + * fee00000 d6000000 1M INTCTL + * fef00000 c0000000 1M CAP + */ + /* * Static I/O regions. * @@ -71,6 +86,10 @@ #define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 #define IXP2000_PCI_CSR_SIZE 0x00100000 +#define IXP2000_MSF_PHYS_BASE 0xc8000000 +#define IXP2000_MSF_VIRT_BASE 0xfeb00000 +#define IXP2000_MSF_SIZE 0x00100000 + #define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 #define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 #define IXP2000_PCI_IO_SIZE 0x01000000 @@ -241,7 +260,7 @@ #define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ #define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ #define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_PNR (1 << 17) /* PCI Not Reset bit */ +#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ #define IXP2000_PCI_RST_REL (1 << 2) #define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) @@ -363,6 +382,7 @@ #define IXP2000_MIN_REV_MASK 0x0000000F #define IXP2000_PROD_ID_MASK 0xFFFFFFFF +#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) #define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) #define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) #define IXP2000_RESET0 GLOBAL_REG(0x0c) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index 901bba6d02b4..c0caf3e3e6fd 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -115,6 +115,7 @@ static inline unsigned int ixp2000_is_pcimaster(void) } void ixp2000_map_io(void); +void ixp2000_uart_init(void); void ixp2000_init_irq(void); void ixp2000_init_time(unsigned long); unsigned long ixp2000_gettimeoffset(void); @@ -138,30 +139,10 @@ struct ixp2000_flash_data { unsigned long (*bank_setup)(unsigned long); }; -/* - * GPIO helper functions - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 - -extern void gpio_line_config(int line, int style); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value) - ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line)); - else - ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line)); -} - struct ixp2000_i2c_pins { unsigned long sda_pin; unsigned long scl_pin; }; + #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h index 473dff4ec561..275136963a0c 100644 --- a/include/asm-arm/arch-ixp2000/vmalloc.h +++ b/include/asm-arm/arch-ixp2000/vmalloc.h @@ -17,4 +17,4 @@ * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ -#define VMALLOC_END 0xfaffefff +#define VMALLOC_END 0xfb000000 diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S index 4499ae8e4b44..2e23651e217f 100644 --- a/include/asm-arm/arch-ixp4xx/debug-macro.S +++ b/include/asm-arm/arch-ixp4xx/debug-macro.S @@ -15,6 +15,7 @@ tst \rx, #1 @ MMU enabled? moveq \rx, #0xc8000000 movne \rx, #0xff000000 + orrne \rx, \rx, #0x00b00000 add \rx,\rx,#3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. .endm diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index c27b9d3079a7..e350dcb544e8 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -3,7 +3,7 @@ * * Author: Deepak Saxena <dsaxena@plexity.net> * - * Copyright (C) 2002-2004 MontaVista Software, Inc. + * Copyright (C) 2002-2005 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -383,6 +383,198 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count) *vaddr++ = inl(io_addr); } +#define PIO_OFFSET 0x10000UL +#define PIO_MASK 0x0ffffUL + +#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ + ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) +static inline unsigned int +__ixp4xx_ioread8(void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)__ixp4xx_inb(port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return (unsigned int)__raw_readb(port); +#else + return (unsigned int)__ixp4xx_readb(port); +#endif +} + +static inline void +__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_insb(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsb(addr, vaddr, count); +#else + __ixp4xx_readsb(port, vaddr, count); +#endif +} + +static inline unsigned int +__ixp4xx_ioread16(void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)__ixp4xx_inw(port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le16_to_cpu(__raw_readw((u32)port)); +#else + return (unsigned int)__ixp4xx_readw((u32)port); +#endif +} + +static inline void +__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_insw(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsw(addr, vaddr, count); +#else + __ixp4xx_readsw(port, vaddr, count); +#endif +} + +static inline unsigned int +__ixp4xx_ioread32(void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + return (unsigned int)__ixp4xx_inl(port & PIO_MASK); + else { +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le32_to_cpu(__raw_readl((u32)port)); +#else + return (unsigned int)__ixp4xx_readl((u32)port); +#endif + } +} + +static inline void +__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_insl(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsl(addr, vaddr, count); +#else + __ixp4xx_readsl(port, vaddr, count); +#endif +} + +static inline void +__ixp4xx_iowrite8(u8 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_outb(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writeb(value, port); +#else + __ixp4xx_writeb(value, port); +#endif +} + +static inline void +__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_outsb(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesb(addr, vaddr, count); +#else + __ixp4xx_writesb(port, vaddr, count); +#endif +} + +static inline void +__ixp4xx_iowrite16(u16 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_outw(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writew(cpu_to_le16(value), addr); +#else + __ixp4xx_writew(value, port); +#endif +} + +static inline void +__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_outsw(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesw(addr, vaddr, count); +#else + __ixp4xx_writesw(port, vaddr, count); +#endif +} + +static inline void +__ixp4xx_iowrite32(u32 value, void __iomem *addr) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_outl(value, port & PIO_MASK); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writel(cpu_to_le32(value), port); +#else + __ixp4xx_writel(value, port); +#endif +} + +static inline void +__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count) +{ + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) + __ixp4xx_outsl(port & PIO_MASK, vaddr, count); + else +#ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesl(addr, vaddr, count); +#else + __ixp4xx_writesl(port, vaddr, count); +#endif +} + +#define ioread8(p) __ixp4xx_ioread8(p) +#define ioread16(p) __ixp4xx_ioread16(p) +#define ioread32(p) __ixp4xx_ioread32(p) + +#define ioread8_rep(p, v, c) __ixp4xx_ioread8_rep(p, v, c) +#define ioread16_rep(p, v, c) __ixp4xx_ioread16_rep(p, v, c) +#define ioread32_rep(p, v, c) __ixp4xx_ioread32_rep(p, v, c) + +#define iowrite8(v,p) __ixp4xx_iowrite8(v,p) +#define iowrite16(v,p) __ixp4xx_iowrite16(v,p) +#define iowrite32(v,p) __ixp4xx_iowrite32(v,p) + +#define iowrite8_rep(p, v, c) __ixp4xx_iowrite8_rep(p, v, c) +#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c) +#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c) + +#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) +#define ioport_unmap(addr) #endif // __ASM_ARM_ARCH_IO_H diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h index 8eeb1db6309d..004696a95bdb 100644 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h @@ -69,6 +69,16 @@ #define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000) #define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000) +/* + * Debug UART + * + * This is basically a remap of UART1 into a region that is section + * aligned so that it * can be used with the low-level debug code. + */ +#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) +#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000) +#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) + #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 #define IXP4XX_EXP_CS2_OFFSET 0x08 diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index 3a626c03ea26..d13ee7f78c70 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -83,17 +83,6 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); #define IXP4XX_GPIO_OUT 0x1 #define IXP4XX_GPIO_IN 0x2 -#define IXP4XX_GPIO_INTSTYLE_MASK 0x7C /* Bits [6:2] define interrupt style */ - -/* - * GPIO interrupt types. - */ -#define IXP4XX_GPIO_ACTIVE_HIGH 0x4 /* Default */ -#define IXP4XX_GPIO_ACTIVE_LOW 0x8 -#define IXP4XX_GPIO_RISING_EDGE 0x10 -#define IXP4XX_GPIO_FALLING_EDGE 0x20 -#define IXP4XX_GPIO_TRANSITIONAL 0x40 - /* GPIO signal types */ #define IXP4XX_GPIO_LOW 0 #define IXP4XX_GPIO_HIGH 1 @@ -102,7 +91,13 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); #define IXP4XX_GPIO_CLK_0 14 #define IXP4XX_GPIO_CLK_1 15 -extern void gpio_line_config(u8 line, u32 style); +static inline void gpio_line_config(u8 line, u32 direction) +{ + if (direction == IXP4XX_GPIO_OUT) + *IXP4XX_GPIO_GPOER |= (1 << line); + else + *IXP4XX_GPIO_GPOER &= ~(1 << line); +} static inline void gpio_line_get(u8 line, int *value) { diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h index 38c9d77d3727..3745e35cc030 100644 --- a/include/asm-arm/arch-ixp4xx/timex.h +++ b/include/asm-arm/arch-ixp4xx/timex.h @@ -7,7 +7,9 @@ /* * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz + * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the + * timer register ignores the bottom 2 bits of the LATCH value. */ -#define CLOCK_TICK_RATE (66666666) +#define FREQ 66666666 +#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h index 60f002b72983..39ca5a31aeea 100644 --- a/include/asm-arm/arch-omap/board-h2.h +++ b/include/asm-arm/arch-omap/board-h2.h @@ -34,11 +34,6 @@ /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 -/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */ -#define OMAP_NOR_FLASH_SIZE SZ_32M -#define OMAP_NOR_FLASH_START1 0x0C000000 /* CS3 */ -#define OMAP_NOR_FLASH_START2 0x0A000000 /* CS2B */ - /* Samsung NAND flash at CS2B or CS3(NAND Boot) */ #define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */ #define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */ diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h index e4d1cd231731..1b12c1dcc2fa 100644 --- a/include/asm-arm/arch-omap/board-h3.h +++ b/include/asm-arm/arch-omap/board-h3.h @@ -30,11 +30,6 @@ /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ #define OMAP1710_ETHR_START 0x04000300 -/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */ -#define OMAP_NOR_FLASH_SIZE SZ_32M -#define OMAP_NOR_FLASH_START1 0x0C000000 /* CS3 */ -#define OMAP_NOR_FLASH_START2 0x0A000000 /* CS2B */ - /* Samsung NAND flash at CS2B or CS3(NAND Boot) */ #define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */ #define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */ diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h index 79138dcfb4ac..d64ee9211eed 100644 --- a/include/asm-arm/arch-omap/board-h4.h +++ b/include/asm-arm/arch-omap/board-h4.h @@ -30,6 +30,9 @@ #define __ASM_ARCH_OMAP_H4_H /* Placeholder for H4 specific defines */ +/* GPMC CS1 */ +#define OMAP24XX_ETHR_START 0x08000300 +#define OMAP24XX_ETHR_GPIO_IRQ 92 #endif /* __ASM_ARCH_OMAP_H4_H */ diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h index 0f1abaefe4de..79574e0ed13d 100644 --- a/include/asm-arm/arch-omap/board-innovator.h +++ b/include/asm-arm/arch-omap/board-innovator.h @@ -36,31 +36,6 @@ #define OMAP1510P1_EMIFS_PRI_VALUE 0x00 #define OMAP1510P1_EMIFF_PRI_VALUE 0x00 -/* - * These definitions define an area of FLASH set aside - * for the use of MTD/JFFS2. This is the area of flash - * that a JFFS2 filesystem will reside which is mounted - * at boot with the "root=/dev/mtdblock/0 rw" - * command line option. The flash address used here must - * fall within the legal range defined by rrload for storing - * the filesystem component. This address will be sufficiently - * deep into the overall flash range to avoid the other - * components also stored in flash such as the bootloader, - * the bootloader params, and the kernel. - * The SW2 settings for the map below are: - * 1 off, 2 off, 3 on, 4 off. - */ - -/* Intel flash_0, partitioned as expected by rrload */ -#define OMAP_FLASH_0_BASE 0xD8000000 -#define OMAP_FLASH_0_START 0x00000000 -#define OMAP_FLASH_0_SIZE SZ_16M - -/* Intel flash_1, used for cramfs or other flash file systems */ -#define OMAP_FLASH_1_BASE 0xD9000000 -#define OMAP_FLASH_1_START 0x01000000 -#define OMAP_FLASH_1_SIZE SZ_16M - #define NR_FPGA_IRQS 24 #define NR_IRQS IH_BOARD_BASE + NR_FPGA_IRQS diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h index aaa49a0fbd21..2b1a8a4fe44e 100644 --- a/include/asm-arm/arch-omap/board-osk.h +++ b/include/asm-arm/arch-omap/board-osk.h @@ -32,10 +32,5 @@ /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 -/* Micron NOR flash at CS3 mapped to address 0x0 if BM bit is 1 */ -#define OMAP_OSK_NOR_FLASH_BASE 0xD8000000 -#define OMAP_OSK_NOR_FLASH_SIZE SZ_32M -#define OMAP_OSK_NOR_FLASH_START 0x00000000 - #endif /* __ASM_ARCH_OMAP_OSK_H */ diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h index 0c224cc74fe4..691e52a52b43 100644 --- a/include/asm-arm/arch-omap/board-perseus2.h +++ b/include/asm-arm/arch-omap/board-perseus2.h @@ -36,23 +36,14 @@ #define OMAP_SDRAM_DEVICE D256M_1X16_4B #endif -/* - * These definitions define an area of FLASH set aside - * for the use of MTD/JFFS2. This is the area of flash - * that a JFFS2 filesystem will reside which is mounted - * at boot with the "root=/dev/mtdblock/0 rw" - * command line option. - */ - -/* Intel flash_0, partitioned as expected by rrload */ -#define OMAP_FLASH_0_BASE 0xD8000000 /* VA */ -#define OMAP_FLASH_0_START 0x00000000 /* PA */ -#define OMAP_FLASH_0_SIZE SZ_32M - #define MAXIRQNUM IH_BOARD_BASE #define MAXFIQNUM MAXIRQNUM #define MAXSWINUM MAXIRQNUM #define NR_IRQS (MAXIRQNUM + 1) +/* Samsung NAND flash at CS2B or CS3(NAND Boot) */ +#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */ +#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */ + #endif diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h index 33977b8956fb..ed6d346ee123 100644 --- a/include/asm-arm/arch-omap/board-voiceblue.h +++ b/include/asm-arm/arch-omap/board-voiceblue.h @@ -11,11 +11,6 @@ #ifndef __ASM_ARCH_VOICEBLUE_H #define __ASM_ARCH_VOICEBLUE_H -#if (EXTERNAL_MAX_NR_PORTS < 4) -#undef EXTERNAL_MAX_NR_PORTS -#define EXTERNAL_MAX_NR_PORTS 4 -#endif - extern void voiceblue_wdt_enable(void); extern void voiceblue_wdt_disable(void); extern void voiceblue_wdt_ping(void); diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h index 1cefd60b6f2a..a0040cd86639 100644 --- a/include/asm-arm/arch-omap/board.h +++ b/include/asm-arm/arch-omap/board.h @@ -16,10 +16,11 @@ /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 #define OMAP_TAG_MMC 0x4f02 -#define OMAP_TAG_UART 0x4f03 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 #define OMAP_TAG_USB 0x4f04 #define OMAP_TAG_LCD 0x4f05 #define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 #define OMAP_TAG_BOOT_REASON 0x4f80 #define OMAP_TAG_FLASH_PART 0x4f81 @@ -29,13 +30,26 @@ struct omap_clock_config { u8 system_clock_type; }; +struct omap_mmc_conf { + unsigned enabled:1; + /* nomux means "standard" muxing is wrong on this board, and that + * board-specific code handled it before common init logic. + */ + unsigned nomux:1; + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + /* 4 wire signaling is optional, and is only used for SD/SDIO */ + unsigned wire4:1; + s16 power_pin; + s16 switch_pin; + s16 wp_pin; +}; + struct omap_mmc_config { - u8 mmc_blocks; - s16 mmc1_power_pin, mmc2_power_pin; - s16 mmc1_switch_pin, mmc2_switch_pin; + struct omap_mmc_conf mmc[2]; }; -struct omap_uart_config { +struct omap_serial_console_config { u8 console_uart; u32 console_speed; }; @@ -82,7 +96,8 @@ struct omap_lcd_config { */ #define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 #define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 +#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 +#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 struct omap_gpio_switch_config { char name[12]; u16 gpio; @@ -99,6 +114,10 @@ struct omap_boot_reason_config { char reason_str[12]; }; +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; struct omap_board_config_entry { u16 tag; diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h new file mode 100644 index 000000000000..2a676b4f13b5 --- /dev/null +++ b/include/asm-arm/arch-omap/common.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/arch-omap/common.h + * + * Header for code common to all OMAP machines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H +#define __ARCH_ARM_MACH_OMAP_COMMON_H + +struct sys_timer; + +extern void omap_map_common_io(void); +extern struct sys_timer omap_timer; +extern void omap_serial_init(int ports[]); + +#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h index e8786713ee5c..1119e2b53e72 100644 --- a/include/asm-arm/arch-omap/cpu.h +++ b/include/asm-arm/arch-omap/cpu.h @@ -38,146 +38,179 @@ extern unsigned int system_rev; /* * Test if multicore OMAP support is needed */ -#undef MULTI_OMAP +#undef MULTI_OMAP1 +#undef MULTI_OMAP2 #undef OMAP_NAME #ifdef CONFIG_ARCH_OMAP730 # ifdef OMAP_NAME -# undef MULTI_OMAP -# define MULTI_OMAP +# undef MULTI_OMAP1 +# define MULTI_OMAP1 # else # define OMAP_NAME omap730 # endif #endif #ifdef CONFIG_ARCH_OMAP1510 # ifdef OMAP_NAME -# undef MULTI_OMAP -# define MULTI_OMAP +# undef MULTI_OMAP1 +# define MULTI_OMAP1 # else # define OMAP_NAME omap1510 # endif #endif #ifdef CONFIG_ARCH_OMAP16XX # ifdef OMAP_NAME -# undef MULTI_OMAP -# define MULTI_OMAP +# undef MULTI_OMAP1 +# define MULTI_OMAP1 # else -# define OMAP_NAME omap1610 +# define OMAP_NAME omap16xx # endif #endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP -# define MULTI_OMAP +#ifdef CONFIG_ARCH_OMAP24XX +# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) +# error "OMAP1 and OMAP2 can't be selected at the same time" # else -# define OMAP_NAME omap1710 +# undef MULTI_OMAP2 +# define OMAP_NAME omap24xx # endif #endif /* - * Generate various OMAP cpu specific macros, and cpu class - * specific macros + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730 + * cpu_is_omap15xx(): True for OMAP1510 and OMAP5910 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + * cpu_is_omap24xx(): True for OMAP2420 */ -#define GET_OMAP_TYPE ((system_rev >> 24) & 0xff) #define GET_OMAP_CLASS (system_rev & 0xff) -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - #define IS_OMAP_CLASS(class, id) \ static inline int is_omap ##class (void) \ { \ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ } -IS_OMAP_TYPE(730, 0x07) -IS_OMAP_TYPE(1510, 0x15) -IS_OMAP_TYPE(1610, 0x16) -IS_OMAP_TYPE(5912, 0x16) -IS_OMAP_TYPE(1710, 0x17) -IS_OMAP_TYPE(2420, 0x24) - IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) -/* - * Macros to group OMAP types into cpu classes. - * These can be used in most places. - * cpu_is_omap15xx(): True for 1510 and 5910 - * cpu_is_omap16xx(): True for 1610, 5912 and 1710 - */ -#if defined(MULTI_OMAP) -# define cpu_is_omap7xx() is_omap7xx() -# define cpu_is_omap15xx() is_omap15xx() -# if !(defined(CONFIG_ARCH_OMAP1510) || defined(CONFIG_ARCH_OMAP730)) -# define cpu_is_omap16xx() 1 -# else +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 +#define cpu_is_omap24xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP1510) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx # define cpu_is_omap16xx() is_omap16xx() # endif #else # if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx # define cpu_is_omap7xx() 1 -# else -# define cpu_is_omap7xx() 0 # endif # if defined(CONFIG_ARCH_OMAP1510) +# undef cpu_is_omap15xx # define cpu_is_omap15xx() 1 -# else -# define cpu_is_omap15xx() 0 # endif # if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx # define cpu_is_omap16xx() 1 -# else -# define cpu_is_omap16xx() 0 +# endif +# if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 # endif #endif -#if defined(MULTI_OMAP) -# define cpu_is_omap730() is_omap730() -# define cpu_is_omap1510() is_omap1510() -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1710() is_omap1710() +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap730(): True for OMAP730 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + * cpu_is_omap2420(): True for OMAP2420 + */ +#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(730, 0x0730) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) +IS_OMAP_TYPE(2420, 0x2420) + +#define cpu_is_omap730() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 +#define cpu_is_omap2420() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap730 +# define cpu_is_omap730() is_omap730() +# endif +# if defined(CONFIG_ARCH_OMAP1510) +# undef cpu_is_omap1510 +# define cpu_is_omap1510() is_omap1510() +# endif #else # if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap730 # define cpu_is_omap730() 1 -# else -# define cpu_is_omap730() 0 # endif # if defined(CONFIG_ARCH_OMAP1510) +# undef cpu_is_omap1510 # define cpu_is_omap1510() 1 -# else -# define cpu_is_omap1510() 0 # endif -# if defined(CONFIG_ARCH_OMAP16XX) -# define cpu_is_omap1610() 1 -# else -# define cpu_is_omap1610() 0 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# define cpu_is_omap5912() 1 -# else -# define cpu_is_omap5912() 0 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 1611B/5912 and 1710. + */ +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 # define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() # define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() # define cpu_is_omap1710() is_omap1710() -# else -# define cpu_is_omap1610() 0 -# define cpu_is_omap5912() 0 -# define cpu_is_omap1710() 0 -# endif -# if defined(CONFIG_ARCH_OMAP2420) +#endif + +#if defined(CONFIG_ARCH_OMAP2420) +# undef cpu_is_omap2420 # define cpu_is_omap2420() 1 -# else -# define cpu_is_omap2420() 0 -# endif #endif #endif diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S index 83bb458afd0b..ca4f577f9675 100644 --- a/include/asm-arm/arch-omap/debug-macro.S +++ b/include/asm-arm/arch-omap/debug-macro.S @@ -14,6 +14,7 @@ .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? +#ifdef CONFIG_ARCH_OMAP1 moveq \rx, #0xff000000 @ physical base address movne \rx, #0xfe000000 @ virtual base orr \rx, \rx, #0x00fb0000 @@ -23,6 +24,18 @@ #if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) orr \rx, \rx, #0x00000800 @ UART 2 & 3 #endif + +#elif CONFIG_ARCH_OMAP2 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xd8000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00004000 @ UART 3 +#endif +#endif .endm .macro senduart,rd,rx diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index d785248377db..04ebef5c6e95 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -240,7 +240,9 @@ extern void omap_dma_unlink_lch (int lch_head, int lch_queue); extern dma_addr_t omap_get_dma_src_pos(int lch); extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern int omap_get_dma_src_addr_counter(int lch); extern void omap_clear_dma(int lch); +extern int omap_dma_running(void); /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ extern int omap_dma_in_1510_mode(void); diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h new file mode 100644 index 000000000000..11772c792f3e --- /dev/null +++ b/include/asm-arm/arch-omap/dmtimer.h @@ -0,0 +1,92 @@ +/* + * linux/include/asm-arm/arm/arch-omap/dmtimer.h + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_TIMER_H +#define __ASM_ARCH_TIMER_H + +#include <linux/list.h> + +#define OMAP_TIMER_SRC_ARMXOR 0x00 +#define OMAP_TIMER_SRC_32_KHZ 0x01 +#define OMAP_TIMER_SRC_EXT_CLK 0x02 + +/* timer control reg bits */ +#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) +#define OMAP_TIMER_CTRL_PT (1 << 12) +#define OMAP_TIMER_CTRL_TRG_OVERFLOW (0x1 << 10) +#define OMAP_TIMER_CTRL_TRG_OFANDMATCH (0x2 << 10) +#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) +#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) +#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) +#define OMAP_TIMER_CTRL_SCPWM (1 << 7) +#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ +#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ +#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* how much to shift the prescaler value */ +#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ +#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ + +/* timer interrupt enable bits */ +#define OMAP_TIMER_INT_CAPTURE (1 << 2) +#define OMAP_TIMER_INT_OVERFLOW (1 << 1) +#define OMAP_TIMER_INT_MATCH (1 << 0) + + +struct omap_dm_timer { + struct list_head timer_list; + + u32 base; + unsigned int irq; +}; + +u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg); +void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value); + +struct omap_dm_timer * omap_dm_timer_request(void); +void omap_dm_timer_free(struct omap_dm_timer *timer); +void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value); +void omap_dm_timer_enable_compare(struct omap_dm_timer *timer); +void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer); + +void omap_dm_timer_trigger(struct omap_dm_timer *timer); +void omap_dm_timer_start(struct omap_dm_timer *timer); +void omap_dm_timer_stop(struct omap_dm_timer *timer); + +void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load); +void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match); + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); + +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); +void omap_dm_timer_reset_counter(struct omap_dm_timer *timer); + +int omap_dm_timers_active(void); + +#endif /* __ASM_ARCH_TIMER_H */ diff --git a/include/asm-arm/arch-omap/dsp.h b/include/asm-arm/arch-omap/dsp.h new file mode 100644 index 000000000000..57bf4f39ca58 --- /dev/null +++ b/include/asm-arm/arch-omap/dsp.h @@ -0,0 +1,244 @@ +/* + * linux/include/asm-arm/arch-omap/dsp.h + * + * Header for OMAP DSP driver + * + * Copyright (C) 2002-2005 Nokia Corporation + * + * Written by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * 2005/06/01: DSP Gateway version 3.3 + */ + +#ifndef ASM_ARCH_DSP_H +#define ASM_ARCH_DSP_H + + +/* + * for /dev/dspctl/ctl + */ +#define OMAP_DSP_IOCTL_RESET 1 +#define OMAP_DSP_IOCTL_RUN 2 +#define OMAP_DSP_IOCTL_SETRSTVECT 3 +#define OMAP_DSP_IOCTL_CPU_IDLE 4 +#define OMAP_DSP_IOCTL_MPUI_WORDSWAP_ON 5 +#define OMAP_DSP_IOCTL_MPUI_WORDSWAP_OFF 6 +#define OMAP_DSP_IOCTL_MPUI_BYTESWAP_ON 7 +#define OMAP_DSP_IOCTL_MPUI_BYTESWAP_OFF 8 +#define OMAP_DSP_IOCTL_GBL_IDLE 9 +#define OMAP_DSP_IOCTL_DSPCFG 10 +#define OMAP_DSP_IOCTL_DSPUNCFG 11 +#define OMAP_DSP_IOCTL_TASKCNT 12 +#define OMAP_DSP_IOCTL_POLL 13 +#define OMAP_DSP_IOCTL_REGMEMR 40 +#define OMAP_DSP_IOCTL_REGMEMW 41 +#define OMAP_DSP_IOCTL_REGIOR 42 +#define OMAP_DSP_IOCTL_REGIOW 43 +#define OMAP_DSP_IOCTL_GETVAR 44 +#define OMAP_DSP_IOCTL_SETVAR 45 +#define OMAP_DSP_IOCTL_RUNLEVEL 50 +#define OMAP_DSP_IOCTL_SUSPEND 51 +#define OMAP_DSP_IOCTL_RESUME 52 +#define OMAP_DSP_IOCTL_FBEN 53 +#define OMAP_DSP_IOCTL_FBDIS 54 +#define OMAP_DSP_IOCTL_MBSEND 99 + +/* + * for taskdev + * (ioctls below should be >= 0x10000) + */ +#define OMAP_DSP_TASK_IOCTL_BFLSH 0x10000 +#define OMAP_DSP_TASK_IOCTL_SETBSZ 0x10001 +#define OMAP_DSP_TASK_IOCTL_LOCK 0x10002 +#define OMAP_DSP_TASK_IOCTL_UNLOCK 0x10003 +#define OMAP_DSP_TASK_IOCTL_GETNAME 0x10004 + +/* + * for /dev/dspctl/mem + */ +#define OMAP_DSP_MEM_IOCTL_EXMAP 1 +#define OMAP_DSP_MEM_IOCTL_EXUNMAP 2 +#define OMAP_DSP_MEM_IOCTL_EXMAP_FLUSH 3 +#define OMAP_DSP_MEM_IOCTL_FBEXPORT 5 +#define OMAP_DSP_MEM_IOCTL_MMUITACK 7 +#define OMAP_DSP_MEM_IOCTL_MMUINIT 9 +#define OMAP_DSP_MEM_IOCTL_KMEM_RESERVE 11 +#define OMAP_DSP_MEM_IOCTL_KMEM_RELEASE 12 + +struct omap_dsp_mapinfo { + unsigned long dspadr; + unsigned long size; +}; + +/* + * for /dev/dspctl/twch + */ +#define OMAP_DSP_TWCH_IOCTL_MKDEV 1 +#define OMAP_DSP_TWCH_IOCTL_RMDEV 2 +#define OMAP_DSP_TWCH_IOCTL_TADD 11 +#define OMAP_DSP_TWCH_IOCTL_TDEL 12 +#define OMAP_DSP_TWCH_IOCTL_TKILL 13 + +#define OMAP_DSP_DEVSTATE_NOTASK 0x00000001 +#define OMAP_DSP_DEVSTATE_ATTACHED 0x00000002 +#define OMAP_DSP_DEVSTATE_GARBAGE 0x00000004 +#define OMAP_DSP_DEVSTATE_INVALID 0x00000008 +#define OMAP_DSP_DEVSTATE_ADDREQ 0x00000100 +#define OMAP_DSP_DEVSTATE_DELREQ 0x00000200 +#define OMAP_DSP_DEVSTATE_ADDFAIL 0x00001000 +#define OMAP_DSP_DEVSTATE_ADDING 0x00010000 +#define OMAP_DSP_DEVSTATE_DELING 0x00020000 +#define OMAP_DSP_DEVSTATE_KILLING 0x00040000 +#define OMAP_DSP_DEVSTATE_STATE_MASK 0x7fffffff +#define OMAP_DSP_DEVSTATE_STALE 0x80000000 + +struct omap_dsp_taddinfo { + unsigned char minor; + unsigned long taskadr; +}; +#define OMAP_DSP_TADD_ABORTADR 0xffffffff + + +/* + * error cause definition (for error detection device) + */ +#define OMAP_DSP_ERRDT_WDT 0x00000001 +#define OMAP_DSP_ERRDT_MMU 0x00000002 + + +/* + * mailbox protocol definitions + */ + +struct omap_dsp_mailbox_cmd { + unsigned short cmd; + unsigned short data; +}; + +struct omap_dsp_reginfo { + unsigned short adr; + unsigned short val; +}; + +struct omap_dsp_varinfo { + unsigned char varid; + unsigned short val[0]; +}; + +#define OMAP_DSP_MBPROT_REVISION 0x0019 + +#define OMAP_DSP_MBCMD_WDSND 0x10 +#define OMAP_DSP_MBCMD_WDREQ 0x11 +#define OMAP_DSP_MBCMD_BKSND 0x20 +#define OMAP_DSP_MBCMD_BKREQ 0x21 +#define OMAP_DSP_MBCMD_BKYLD 0x23 +#define OMAP_DSP_MBCMD_BKSNDP 0x24 +#define OMAP_DSP_MBCMD_BKREQP 0x25 +#define OMAP_DSP_MBCMD_TCTL 0x30 +#define OMAP_DSP_MBCMD_TCTLDATA 0x31 +#define OMAP_DSP_MBCMD_POLL 0x32 +#define OMAP_DSP_MBCMD_WDT 0x50 /* v3.3: obsolete */ +#define OMAP_DSP_MBCMD_RUNLEVEL 0x51 +#define OMAP_DSP_MBCMD_PM 0x52 +#define OMAP_DSP_MBCMD_SUSPEND 0x53 +#define OMAP_DSP_MBCMD_KFUNC 0x54 +#define OMAP_DSP_MBCMD_TCFG 0x60 +#define OMAP_DSP_MBCMD_TADD 0x62 +#define OMAP_DSP_MBCMD_TDEL 0x63 +#define OMAP_DSP_MBCMD_TSTOP 0x65 +#define OMAP_DSP_MBCMD_DSPCFG 0x70 +#define OMAP_DSP_MBCMD_REGRW 0x72 +#define OMAP_DSP_MBCMD_GETVAR 0x74 +#define OMAP_DSP_MBCMD_SETVAR 0x75 +#define OMAP_DSP_MBCMD_ERR 0x78 +#define OMAP_DSP_MBCMD_DBG 0x79 + +#define OMAP_DSP_MBCMD_TCTL_TINIT 0x0000 +#define OMAP_DSP_MBCMD_TCTL_TEN 0x0001 +#define OMAP_DSP_MBCMD_TCTL_TDIS 0x0002 +#define OMAP_DSP_MBCMD_TCTL_TCLR 0x0003 +#define OMAP_DSP_MBCMD_TCTL_TCLR_FORCE 0x0004 + +#define OMAP_DSP_MBCMD_RUNLEVEL_USER 0x01 +#define OMAP_DSP_MBCMD_RUNLEVEL_SUPER 0x0e +#define OMAP_DSP_MBCMD_RUNLEVEL_RECOVERY 0x10 + +#define OMAP_DSP_MBCMD_PM_DISABLE 0x00 +#define OMAP_DSP_MBCMD_PM_ENABLE 0x01 + +#define OMAP_DSP_MBCMD_KFUNC_FBCTL 0x00 + +#define OMAP_DSP_MBCMD_FBCTL_ENABLE 0x0002 +#define OMAP_DSP_MBCMD_FBCTL_DISABLE 0x0003 + +#define OMAP_DSP_MBCMD_TDEL_SAFE 0x0000 +#define OMAP_DSP_MBCMD_TDEL_KILL 0x0001 + +#define OMAP_DSP_MBCMD_DSPCFG_REQ 0x00 +#define OMAP_DSP_MBCMD_DSPCFG_SYSADRH 0x28 +#define OMAP_DSP_MBCMD_DSPCFG_SYSADRL 0x29 +#define OMAP_DSP_MBCMD_DSPCFG_PROTREV 0x70 +#define OMAP_DSP_MBCMD_DSPCFG_ABORT 0x78 +#define OMAP_DSP_MBCMD_DSPCFG_LAST 0x80 + +#define OMAP_DSP_MBCMD_REGRW_MEMR 0x00 +#define OMAP_DSP_MBCMD_REGRW_MEMW 0x01 +#define OMAP_DSP_MBCMD_REGRW_IOR 0x02 +#define OMAP_DSP_MBCMD_REGRW_IOW 0x03 +#define OMAP_DSP_MBCMD_REGRW_DATA 0x04 + +#define OMAP_DSP_MBCMD_VARID_ICRMASK 0x00 +#define OMAP_DSP_MBCMD_VARID_LOADINFO 0x01 + +#define OMAP_DSP_TTYP_ARCV 0x0001 +#define OMAP_DSP_TTYP_ASND 0x0002 +#define OMAP_DSP_TTYP_BKMD 0x0004 +#define OMAP_DSP_TTYP_BKDM 0x0008 +#define OMAP_DSP_TTYP_PVMD 0x0010 +#define OMAP_DSP_TTYP_PVDM 0x0020 + +#define OMAP_DSP_EID_BADTID 0x10 +#define OMAP_DSP_EID_BADTCN 0x11 +#define OMAP_DSP_EID_BADBID 0x20 +#define OMAP_DSP_EID_BADCNT 0x21 +#define OMAP_DSP_EID_NOTLOCKED 0x22 +#define OMAP_DSP_EID_STVBUF 0x23 +#define OMAP_DSP_EID_BADADR 0x24 +#define OMAP_DSP_EID_BADTCTL 0x30 +#define OMAP_DSP_EID_BADPARAM 0x50 +#define OMAP_DSP_EID_FATAL 0x58 +#define OMAP_DSP_EID_NOMEM 0xc0 +#define OMAP_DSP_EID_NORES 0xc1 +#define OMAP_DSP_EID_IPBFULL 0xc2 +#define OMAP_DSP_EID_WDT 0xd0 +#define OMAP_DSP_EID_TASKNOTRDY 0xe0 +#define OMAP_DSP_EID_TASKBSY 0xe1 +#define OMAP_DSP_EID_TASKERR 0xef +#define OMAP_DSP_EID_BADCFGTYP 0xf0 +#define OMAP_DSP_EID_DEBUG 0xf8 +#define OMAP_DSP_EID_BADSEQ 0xfe +#define OMAP_DSP_EID_BADCMD 0xff + +#define OMAP_DSP_TNM_LEN 16 + +#define OMAP_DSP_TID_FREE 0xff +#define OMAP_DSP_TID_ANON 0xfe + +#define OMAP_DSP_BID_NULL 0xffff +#define OMAP_DSP_BID_PVT 0xfffe + +#endif /* ASM_ARCH_DSP_H */ diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h new file mode 100644 index 000000000000..4fcce6944056 --- /dev/null +++ b/include/asm-arm/arch-omap/dsp_common.h @@ -0,0 +1,37 @@ +/* + * linux/include/asm-arm/arch-omap/dsp_common.h + * + * Header for OMAP DSP subsystem control + * + * Copyright (C) 2004,2005 Nokia Corporation + * + * Written by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * 2005/06/03: DSP Gateway version 3.3 + */ + +#ifndef ASM_ARCH_DSP_COMMON_H +#define ASM_ARCH_DSP_COMMON_H + +void omap_dsp_pm_suspend(void); +void omap_dsp_pm_resume(void); +void omap_dsp_request_mpui(void); +void omap_dsp_release_mpui(void); +int omap_dsp_request_mem(void); +int omap_dsp_release_mem(void); + +#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index 57b126889b98..0d29b9c56a95 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -8,6 +8,8 @@ * warranty of any kind, whether express or implied. */ +#if defined(CONFIG_ARCH_OMAP1) + .macro disable_fiq .endm @@ -30,3 +32,29 @@ 1510: .endm +#elif defined(CONFIG_ARCH_OMAP24XX) + +#include <asm/arch/omap24xx.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =VA_IC_BASE + ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ + cmp \irqnr, #0x0 + bne 2222f + ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ + cmp \irqnr, #0x0 + bne 2222f + ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ + cmp \irqnr, #0x0 +2222: + ldrne \irqnr, [\base, #IRQ_SIR_IRQ] + + .endm + + .macro irq_prio_table + .endm + +#endif diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index fad2fc93ee70..74cb2b93b700 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -3,7 +3,7 @@ * * OMAP GPIO handling defines and functions * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003-2005 Nokia Corporation * * Written by Juha Yrjölä <juha.yrjola@nokia.com> * @@ -30,7 +30,23 @@ #include <asm/arch/irqs.h> #include <asm/io.h> -#define OMAP_MPUIO_BASE 0xfffb5000 +#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 + +#ifdef CONFIG_ARCH_OMAP730 +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x02 +#define OMAP_MPUIO_IO_CNTL 0x04 +#define OMAP_MPUIO_KBR_LATCH 0x08 +#define OMAP_MPUIO_KBC 0x0a +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c +#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e +#define OMAP_MPUIO_KBD_INT 0x10 +#define OMAP_MPUIO_GPIO_INT 0x12 +#define OMAP_MPUIO_KBD_MASKIT 0x14 +#define OMAP_MPUIO_GPIO_MASKIT 0x16 +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 +#define OMAP_MPUIO_LATCH 0x1a +#else #define OMAP_MPUIO_INPUT_LATCH 0x00 #define OMAP_MPUIO_OUTPUT 0x04 #define OMAP_MPUIO_IO_CNTL 0x08 @@ -44,6 +60,7 @@ #define OMAP_MPUIO_GPIO_MASKIT 0x2c #define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 #define OMAP_MPUIO_LATCH 0x34 +#endif #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) @@ -52,18 +69,11 @@ IH_MPUIO_BASE + ((nr) & 0x0f) : \ IH_GPIO_BASE + ((nr) & 0x3f)) -/* For EDGECTRL */ -#define OMAP_GPIO_NO_EDGE 0x00 -#define OMAP_GPIO_FALLING_EDGE 0x01 -#define OMAP_GPIO_RISING_EDGE 0x02 -#define OMAP_GPIO_BOTH_EDGES 0x03 - extern int omap_gpio_init(void); /* Call from board init only */ extern int omap_request_gpio(int gpio); extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); extern void omap_set_gpio_dataout(int gpio, int enable); extern int omap_get_gpio_datain(int gpio); -extern void omap_set_gpio_edge_ctrl(int gpio, int edge); #endif diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index 37e06c782bdf..60201e1dd6ad 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -43,6 +43,7 @@ #include <asm/arch/cpu.h> #endif #include <asm/arch/io.h> +#include <asm/arch/serial.h> /* * --------------------------------------------------------------------------- @@ -54,6 +55,19 @@ /* * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- * Clocks * ---------------------------------------------------------------------------- */ @@ -76,10 +90,12 @@ /* DPLL control registers */ #define DPLL_CTL (0xfffecf00) -/* DSP clock control */ +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ #define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) /* * --------------------------------------------------------------------------- @@ -88,6 +104,7 @@ */ #define ULPD_REG_BASE (0xfffe0800) #define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) #define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) # define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ # define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ @@ -127,6 +144,13 @@ * Interrupts * --------------------------------------------------------------------------- */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + #define OMAP_IH1_BASE 0xfffecb00 #define OMAP_IH2_BASE 0xfffe0000 @@ -155,6 +179,8 @@ #define IRQ_ILR0_REG_OFFSET 0x1c #define IRQ_GMR_REG_OFFSET 0xa0 +#endif + /* * ---------------------------------------------------------------------------- * System control registers @@ -245,40 +271,18 @@ /* * --------------------------------------------------------------------------- - * Serial ports - * --------------------------------------------------------------------------- - */ -#define OMAP_UART1_BASE (unsigned char *)0xfffb0000 -#define OMAP_UART2_BASE (unsigned char *)0xfffb0800 -#define OMAP_UART3_BASE (unsigned char *)0xfffb9800 -#define OMAP_MAX_NR_PORTS 3 -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) - -#define is_omap_port(p) ({int __ret = 0; \ - if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ - p == IO_ADDRESS(OMAP_UART2_BASE) || \ - p == IO_ADDRESS(OMAP_UART3_BASE)) \ - __ret = 1; \ - __ret; \ - }) - -/* - * --------------------------------------------------------------------------- * Processor specific defines * --------------------------------------------------------------------------- */ -#ifdef CONFIG_ARCH_OMAP730 -#include "omap730.h" -#endif -#ifdef CONFIG_ARCH_OMAP1510 +#include "omap730.h" #include "omap1510.h" + +#ifdef CONFIG_ARCH_OMAP24XX +#include "omap24xx.h" #endif -#ifdef CONFIG_ARCH_OMAP16XX #include "omap16xx.h" -#endif /* * --------------------------------------------------------------------------- @@ -304,7 +308,6 @@ #ifdef CONFIG_MACH_OMAP_H4 #include "board-h4.h" -#error "Support for H4 board not yet implemented." #endif #ifdef CONFIG_MACH_OMAP_OSK diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 1c8c9fcc766e..11fbf629bf75 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -49,16 +49,24 @@ * I/O mapping * ---------------------------------------------------------------------------- */ -#define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define IO_SIZE 0x40000 -#define IO_ADDRESS(x) ((x) - IO_OFFSET) -#define PCIO_BASE 0 +#if defined(CONFIG_ARCH_OMAP1) +#define IO_PHYS 0xFFFB0000 +#define IO_OFFSET -0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_SIZE 0x40000 -#define io_p2v(x) ((x) - IO_OFFSET) -#define io_v2p(x) ((x) + IO_OFFSET) +#elif defined(CONFIG_ARCH_OMAP2) +#define IO_PHYS 0x48000000 /* L4 peripherals; other stuff has to be mapped * + * manually. */ +#define IO_OFFSET 0x90000000 /* Virtual IO = 0xd8000000 */ +#define IO_SIZE 0x08000000 +#endif + +#define IO_VIRT (IO_PHYS + IO_OFFSET) +#define IO_ADDRESS(x) ((x) + IO_OFFSET) +#define PCIO_BASE 0 +#define io_p2v(x) ((x) + IO_OFFSET) +#define io_v2p(x) ((x) - IO_OFFSET) #ifndef __ASSEMBLER__ @@ -96,6 +104,8 @@ typedef struct { volatile u32 offset[4096]; } __regbase32; ->offset[((vaddr)&4095)>>2] #define __REG32(paddr) __REGV32(io_p2v(paddr)) +extern void omap_map_common_io(void); + #else #define __REG8(paddr) io_p2v(paddr) diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 6701fd9e5f9b..74e108ccac16 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -135,7 +135,6 @@ /* * OMAP-1510 specific IRQ numbers for interrupt handler 2 */ -#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE) #define INT_1510_COM_SPI_RO (31 + IH2_BASE) /* @@ -159,6 +158,7 @@ #define INT_1610_GPIO_BANK3 (41 + IH2_BASE) #define INT_1610_MMC2 (42 + IH2_BASE) #define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) #define INT_1610_GPIO_BANK4 (48 + IH2_BASE) #define INT_1610_SPI (49 + IH2_BASE) #define INT_1610_DMA_CH6 (53 + IH2_BASE) @@ -231,6 +231,11 @@ #define INT_730_DMA_CH15 (62 + IH2_BASE) #define INT_730_NAND (63 + IH2_BASE) +#define INT_24XX_GPIO_BANK1 29 +#define INT_24XX_GPIO_BANK2 30 +#define INT_24XX_GPIO_BANK3 31 +#define INT_24XX_GPIO_BANK4 32 + /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 @@ -238,6 +243,8 @@ #define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) #define IH_BOARD_BASE (16 + IH_MPUIO_BASE) +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + #ifndef __ASSEMBLY__ extern void omap_init_irq(void); #endif diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h index f6b57dd846a3..84f81e315a25 100644 --- a/include/asm-arm/arch-omap/memory.h +++ b/include/asm-arm/arch-omap/memory.h @@ -36,12 +36,11 @@ /* * Physical DRAM offset. */ +#if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET (0x10000000UL) - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET (0x30000000UL) +#elif defined(CONFIG_ARCH_OMAP2) +#define PHYS_OFFSET (0x80000000UL) +#endif /* * Conversion between SDRAM and fake PCI bus, used by USB @@ -64,6 +63,11 @@ */ #ifdef CONFIG_ARCH_OMAP1510 +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET (0x30000000UL) + #define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) #define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) #define is_lbus_device(dev) (cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h new file mode 100644 index 000000000000..a73a28571fee --- /dev/null +++ b/include/asm-arm/arch-omap/mtd-xip.h @@ -0,0 +1,61 @@ +/* + * MTD primitives for XIP support. Architecture specific functions. + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Vladimir Barinov <vbarinov@ru.mvista.com> + * + * (c) 2005 MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express or + * implied. + */ + +#ifndef __ARCH_OMAP_MTD_XIP_H__ +#define __ARCH_OMAP_MTD_XIP_H__ + +#include <asm/hardware.h> +#define OMAP_MPU_TIMER_BASE (0xfffec500) +#define OMAP_MPU_TIMER_OFFSET 0x100 + +typedef struct { + u32 cntl; /* CNTL_TIMER, R/W */ + u32 load_tim; /* LOAD_TIM, W */ + u32 read_tim; /* READ_TIM, R */ +} xip_omap_mpu_timer_regs_t; + +#define xip_omap_mpu_timer_base(n) \ +((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ + (n)*OMAP_MPU_TIMER_OFFSET)) + +static inline unsigned long xip_omap_mpu_timer_read(int nr) +{ + volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr); + return timer->read_tim; +} + +#define xip_irqpending() \ + (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR)) +#define xip_currtime() (~xip_omap_mpu_timer_read(0)) + +/* + * It's permitted to do approxmation for xip_elapsed_since macro + * (see linux/mtd/xip.h) + */ + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) +#else +#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) +#endif + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * As above, this should not rely upon standard kernel code. + */ + +#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1)) + +#endif /* __ARCH_OMAP_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index 39f99decbb7b..1b1ad4105349 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -185,6 +185,7 @@ typedef enum { /* MPUIO */ MPUIO2, + N15_1610_MPUIO2, MPUIO4, MPUIO5, T20_1610_MPUIO5, @@ -210,6 +211,7 @@ typedef enum { /* Misc ballouts */ BALLOUT_V8_ARMIO3, + N20_HDQ, /* OMAP-1610 MMC2 */ W8_1610_MMC2_DAT0, @@ -231,23 +233,27 @@ typedef enum { J19_1610_ETM_D6, J18_1610_ETM_D7, - /* OMAP-1610 GPIO */ + /* OMAP16XX GPIO */ P20_1610_GPIO4, V9_1610_GPIO7, W8_1610_GPIO9, + N20_1610_GPIO11, N19_1610_GPIO13, P10_1610_GPIO22, V5_1610_GPIO24, AA20_1610_GPIO_41, W19_1610_GPIO48, M7_1610_GPIO62, + V14_16XX_GPIO37, + R9_16XX_GPIO18, + L14_16XX_GPIO49, /* OMAP-1610 uWire */ V19_1610_UWIRE_SCLK, U18_1610_UWIRE_SDI, W21_1610_UWIRE_SDO, N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS0, + P15_1610_UWIRE_CS3, N15_1610_UWIRE_CS1, /* OMAP-1610 Flash */ @@ -285,12 +291,13 @@ typedef enum { V6_USB2_TXD, W5_USB2_SE0, - /* UART1 1610 */ - + /* 16XX UART */ R13_1610_UART1_TX, - V14_1610_UART1_RX, + V14_16XX_UART1_RX, R14_1610_UART1_CTS, AA15_1610_UART1_RTS, + R9_16XX_UART2_RX, + L14_16XX_UART3_RX, /* I2C OMAP-1610 */ I2C_SCL, @@ -332,7 +339,7 @@ typedef enum { * Table of various FUNC_MUX and PULL_DWN combinations for each device. * See also reg_cfg_t above for the lookup table. */ -static reg_cfg_set __initdata_or_module +static const reg_cfg_set __initdata_or_module reg_cfg_table[] = { /* * description mux mode mux pull pull pull pu_pd pu dbg @@ -407,7 +414,8 @@ MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) /* MPUIO */ -MUX_CFG("MPUIO2", 7, 18, 0, 1, 1, 1, NA, 0, 1) +MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1) +MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1) MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) @@ -434,6 +442,7 @@ MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) /* Misc ballouts */ MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) +MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) /* OMAP-1610 MMC2 */ MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) @@ -455,16 +464,20 @@ MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) -/* OMAP-1610 GPIO */ +/* OMAP16XX GPIO */ MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) +MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1) MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) +MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0) +MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0) +MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0) /* OMAP-1610 uWire */ MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) @@ -503,16 +516,17 @@ MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) -MUX_CFG("R8_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) - -/* UART1 */ +/* 16XX UART */ MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) -MUX_CFG("V14_1610_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) +MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) +MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1) +MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1) /* I2C interface */ MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h index f491a48ef2e1..f086a3933906 100644 --- a/include/asm-arm/arch-omap/omap1510.h +++ b/include/asm-arm/arch-omap/omap1510.h @@ -36,10 +36,6 @@ /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ -#define OMAP1510_SRAM_BASE 0xD0000000 -#define OMAP1510_SRAM_SIZE (SZ_128K + SZ_64K) -#define OMAP1510_SRAM_START 0x20000000 - #define OMAP1510_DSP_BASE 0xE0000000 #define OMAP1510_DSP_SIZE 0x28000 #define OMAP1510_DSP_START 0xE0000000 @@ -48,14 +44,5 @@ #define OMAP1510_DSPREG_SIZE SZ_128K #define OMAP1510_DSPREG_START 0xE1000000 -/* - * ---------------------------------------------------------------------------- - * Memory used by power management - * ---------------------------------------------------------------------------- - */ - -#define OMAP1510_SRAM_IDLE_SUSPEND (OMAP1510_SRAM_BASE + OMAP1510_SRAM_SIZE - 0x200) -#define OMAP1510_SRAM_API_SUSPEND (OMAP1510_SRAM_IDLE_SUSPEND + 0x100) - #endif /* __ASM_ARCH_OMAP1510_H */ diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h index 88b1fe43ae9e..f0c7f0fb4dc0 100644 --- a/include/asm-arm/arch-omap/omap16xx.h +++ b/include/asm-arm/arch-omap/omap16xx.h @@ -36,11 +36,6 @@ /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ -#define OMAP16XX_SRAM_BASE 0xD0000000 -#define OMAP1610_SRAM_SIZE (SZ_16K) -#define OMAP5912_SRAM_SIZE 0x3E800 -#define OMAP16XX_SRAM_START 0x20000000 - #define OMAP16XX_DSP_BASE 0xE0000000 #define OMAP16XX_DSP_SIZE 0x28000 #define OMAP16XX_DSP_START 0xE0000000 @@ -50,17 +45,6 @@ #define OMAP16XX_DSPREG_START 0xE1000000 /* - * ---------------------------------------------------------------------------- - * Memory used by power management - * ---------------------------------------------------------------------------- - */ - -#define OMAP1610_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200) -#define OMAP1610_SRAM_API_SUSPEND (OMAP1610_SRAM_IDLE_SUSPEND + 0x100) -#define OMAP5912_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200) -#define OMAP5912_SRAM_API_SUSPEND (OMAP5912_SRAM_IDLE_SUSPEND + 0x100) - -/* * --------------------------------------------------------------------------- * Interrupts * --------------------------------------------------------------------------- @@ -183,5 +167,37 @@ #define OMAP16XX_PWL_ENABLE (OMAP16XX_PWL_BASE + 0x00) #define OMAP16XX_PWL_CLK_ENABLE (OMAP16XX_PWL_BASE + 0x04) +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* 32-bit Watchdog timer in OMAP 16XX */ +#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) +#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) +#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) +#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) +#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) +#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) +#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) +#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) +#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) +#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) + +#define WCLR_PRE_SHIFT 5 +#define WCLR_PTV_SHIFT 2 + +#define WWPS_W_PEND_WSPR (1 << 4) +#define WWPS_W_PEND_WTGR (1 << 3) +#define WWPS_W_PEND_WLDR (1 << 2) +#define WWPS_W_PEND_WCRR (1 << 1) +#define WWPS_W_PEND_WCLR (1 << 0) + +#define WSPR_ENABLE_0 (0x0000bbbb) +#define WSPR_ENABLE_1 (0x00004444) +#define WSPR_DISABLE_0 (0x0000aaaa) +#define WSPR_DISABLE_1 (0x00005555) + #endif /* __ASM_ARCH_OMAP16XX_H */ diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h new file mode 100644 index 000000000000..a9105466a417 --- /dev/null +++ b/include/asm-arm/arch-omap/omap24xx.h @@ -0,0 +1,15 @@ +#ifndef __ASM_ARCH_OMAP24XX_H +#define __ASM_ARCH_OMAP24XX_H + +#define OMAP24XX_L4_IO_BASE 0x48000000 + +/* interrupt controller */ +#define OMAP24XX_IC_BASE (OMAP24XX_L4_IO_BASE + 0xfe000) +#define VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#define OMAP24XX_IVA_INTC_BASE 0x40000000 + +#define IRQ_SIR_IRQ 0x0040 + +#endif /* __ASM_ARCH_OMAP24XX_H */ + diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h index 599ab00f5488..755b64c5e9f0 100644 --- a/include/asm-arm/arch-omap/omap730.h +++ b/include/asm-arm/arch-omap/omap730.h @@ -36,10 +36,6 @@ /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ -#define OMAP730_SRAM_BASE 0xD0000000 -#define OMAP730_SRAM_SIZE (SZ_128K + SZ_64K + SZ_8K) -#define OMAP730_SRAM_START 0x20000000 - #define OMAP730_DSP_BASE 0xE0000000 #define OMAP730_DSP_SIZE 0x50000 #define OMAP730_DSP_START 0xE0000000 diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h index f209fc0953fb..fbd742d0c499 100644 --- a/include/asm-arm/arch-omap/pm.h +++ b/include/asm-arm/arch-omap/pm.h @@ -61,7 +61,10 @@ #define PER_EN 0x1 #define CPU_SUSPEND_SIZE 200 -#define ULPD_LOW_POWER_EN 0x0001 +#define ULPD_LOW_PWR_EN 0x0001 +#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010 +#define ULPD_SETUP_ANALOG_CELL_3_VAL 0 +#define ULPD_POWER_CTRL_REG_VAL 0x0219 #define DSP_IDLE_DELAY 10 #define DSP_IDLE 0x0040 @@ -86,46 +89,35 @@ #define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5 #define OMAP1510_IDLE_LOOP_REQUEST 0x0c00 #define OMAP1510_IDLE_CLOCK_DOMAINS 0x2 -#define OMAP1510_ULPD_LOW_POWER_REQ 0x0001 -#define OMAP1610_DEEP_SLEEP_REQUEST 0x17c7 -#define OMAP1610_BIG_SLEEP_REQUEST TBD +/* Both big sleep and deep sleep use same values. Difference is in ULPD. */ +#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7 +#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP1610_IDLECT3_VAL 0x3f +#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c +#define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP1610_IDLE_CLOCK_DOMAINS 0x09c7 -#define OMAP1610_ULPD_LOW_POWER_REQ 0x3 - -#ifndef OMAP1510_SRAM_IDLE_SUSPEND -#define OMAP1510_SRAM_IDLE_SUSPEND 0 -#endif -#ifndef OMAP1610_SRAM_IDLE_SUSPEND -#define OMAP1610_SRAM_IDLE_SUSPEND 0 -#endif -#ifndef OMAP5912_SRAM_IDLE_SUSPEND -#define OMAP5912_SRAM_IDLE_SUSPEND 0 -#endif - -#ifndef OMAP1510_SRAM_API_SUSPEND -#define OMAP1510_SRAM_API_SUSPEND 0 -#endif -#ifndef OMAP1610_SRAM_API_SUSPEND -#define OMAP1610_SRAM_API_SUSPEND 0 -#endif -#ifndef OMAP5912_SRAM_API_SUSPEND -#define OMAP5912_SRAM_API_SUSPEND 0 -#endif #if !defined(CONFIG_ARCH_OMAP1510) && \ - !defined(CONFIG_ARCH_OMAP16XX) + !defined(CONFIG_ARCH_OMAP16XX) && \ + !defined(CONFIG_ARCH_OMAP24XX) #error "Power management for this processor not implemented yet" #endif #ifndef __ASSEMBLER__ extern void omap_pm_idle(void); extern void omap_pm_suspend(void); -extern int omap1510_cpu_suspend(unsigned short, unsigned short); -extern int omap1610_cpu_suspend(unsigned short, unsigned short); -extern int omap1510_idle_loop_suspend(void); -extern int omap1610_idle_loop_suspend(void); +extern void omap1510_cpu_suspend(unsigned short, unsigned short); +extern void omap1610_cpu_suspend(unsigned short, unsigned short); +extern void omap1510_idle_loop_suspend(void); +extern void omap1610_idle_loop_suspend(void); + +#ifdef CONFIG_OMAP_SERIAL_WAKE +extern void omap_serial_wake_trigger(int enable); +#else +#define omap_serial_wake_trigger(x) {} +#endif /* CONFIG_OMAP_SERIAL_WAKE */ + extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; @@ -161,6 +153,7 @@ enum arm_save_state { ARM_SLEEP_SAVE_ARM_CKCTL, ARM_SLEEP_SAVE_ARM_IDLECT1, ARM_SLEEP_SAVE_ARM_IDLECT2, + ARM_SLEEP_SAVE_ARM_IDLECT3, ARM_SLEEP_SAVE_ARM_EWUPCT, ARM_SLEEP_SAVE_ARM_RSTCT1, ARM_SLEEP_SAVE_ARM_RSTCT2, diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h new file mode 100644 index 000000000000..79a5297af9fc --- /dev/null +++ b/include/asm-arm/arch-omap/serial.h @@ -0,0 +1,37 @@ +/* + * linux/include/asm-arm/arch-omap/serial.h + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#if defined(CONFIG_ARCH_OMAP1) +/* OMAP1 serial ports */ +#define OMAP_UART1_BASE 0xfffb0000 +#define OMAP_UART2_BASE 0xfffb0800 +#define OMAP_UART3_BASE 0xfffb9800 +#elif defined(CONFIG_ARCH_OMAP2) +/* OMAP2 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x4806e000 +#endif + +#define OMAP_MAX_NR_PORTS 3 +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +#define is_omap_port(p) ({int __ret = 0; \ + if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ + p == IO_ADDRESS(OMAP_UART2_BASE) || \ + p == IO_ADDRESS(OMAP_UART3_BASE)) \ + __ret = 1; \ + __ret; \ + }) + +#endif diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index 17a2c4825f07..ff37bc27e603 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -5,7 +5,9 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H #include <linux/config.h> +#include <asm/mach-types.h> #include <asm/arch/hardware.h> +#include <asm/mach-types.h> static inline void arch_idle(void) { @@ -14,7 +16,24 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - omap_writew(1, ARM_RSTCT1); + +#ifdef CONFIG_ARCH_OMAP16XX + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), + DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } +#endif +#ifdef CONFIG_MACH_VOICEBLUE + if (machine_is_voiceblue()) + voiceblue_reset(); + else +#endif + omap_writew(1, ARM_RSTCT1); } #endif diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/asm-arm/arch-omap/tps65010.h index 0f97bb2e8fce..b9aa2b3a3909 100644 --- a/include/asm-arm/arch-omap/tps65010.h +++ b/include/asm-arm/arch-omap/tps65010.h @@ -30,6 +30,66 @@ /* * ---------------------------------------------------------------------------- + * Registers, all 8 bits + * ---------------------------------------------------------------------------- + */ + +#define TPS_CHGSTATUS 0x01 +# define TPS_CHG_USB (1 << 7) +# define TPS_CHG_AC (1 << 6) +# define TPS_CHG_THERM (1 << 5) +# define TPS_CHG_TERM (1 << 4) +# define TPS_CHG_TAPER_TMO (1 << 3) +# define TPS_CHG_CHG_TMO (1 << 2) +# define TPS_CHG_PRECHG_TMO (1 << 1) +# define TPS_CHG_TEMP_ERR (1 << 0) +#define TPS_REGSTATUS 0x02 +# define TPS_REG_ONOFF (1 << 7) +# define TPS_REG_COVER (1 << 6) +# define TPS_REG_UVLO (1 << 5) +# define TPS_REG_NO_CHG (1 << 4) /* tps65013 */ +# define TPS_REG_PG_LD02 (1 << 3) +# define TPS_REG_PG_LD01 (1 << 2) +# define TPS_REG_PG_MAIN (1 << 1) +# define TPS_REG_PG_CORE (1 << 0) +#define TPS_MASK1 0x03 +#define TPS_MASK2 0x04 +#define TPS_ACKINT1 0x05 +#define TPS_ACKINT2 0x06 +#define TPS_CHGCONFIG 0x07 +# define TPS_CHARGE_POR (1 << 7) /* 65010/65012 */ +# define TPS65013_AUA (1 << 7) /* 65011/65013 */ +# define TPS_CHARGE_RESET (1 << 6) +# define TPS_CHARGE_FAST (1 << 5) +# define TPS_CHARGE_CURRENT (3 << 3) +# define TPS_VBUS_500MA (1 << 2) +# define TPS_VBUS_CHARGING (1 << 1) +# define TPS_CHARGE_ENABLE (1 << 0) +#define TPS_LED1_ON 0x08 +#define TPS_LED1_PER 0x09 +#define TPS_LED2_ON 0x0a +#define TPS_LED2_PER 0x0b +#define TPS_VDCDC1 0x0c +# define TPS_ENABLE_LP (1 << 3) +#define TPS_VDCDC2 0x0d +#define TPS_VREGS1 0x0e +# define TPS_LDO2_ENABLE (1 << 7) +# define TPS_LDO2_OFF (1 << 6) +# define TPS_VLDO2_3_0V (3 << 4) +# define TPS_VLDO2_2_75V (2 << 4) +# define TPS_VLDO2_2_5V (1 << 4) +# define TPS_VLDO2_1_8V (0 << 4) +# define TPS_LDO1_ENABLE (1 << 3) +# define TPS_LDO1_OFF (1 << 2) +# define TPS_VLDO1_3_0V (3 << 0) +# define TPS_VLDO1_2_75V (2 << 0) +# define TPS_VLDO1_2_5V (1 << 0) +# define TPS_VLDO1_ADJ (0 << 0) +#define TPS_MASK3 0x0f +#define TPS_DEFGPIO 0x10 + +/* + * ---------------------------------------------------------------------------- * Macros used by exported functions * ---------------------------------------------------------------------------- */ @@ -71,10 +131,26 @@ extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value); */ extern int tps65010_set_led(unsigned led, unsigned mode); +/* tps65010_set_vib parameter: + * value: ON or OFF + */ +extern int tps65010_set_vib(unsigned value); + /* tps65010_set_low_pwr parameter: * mode: ON or OFF */ extern int tps65010_set_low_pwr(unsigned mode); +/* tps65010_config_vregs1 parameter: + * value to be written to VREGS1 register + * Note: The complete register is written, set all bits you need + */ +extern int tps65010_config_vregs1(unsigned value); + +/* tps65013_set_low_pwr parameter: + * mode: ON or OFF + */ +extern int tps65013_set_low_pwr(unsigned mode); + #endif /* __ASM_ARCH_TPS65010_H */ diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h index 3e640aba8c20..3545c86859cc 100644 --- a/include/asm-arm/arch-omap/uncompress.h +++ b/include/asm-arm/arch-omap/uncompress.h @@ -20,7 +20,7 @@ #include <linux/config.h> #include <linux/types.h> #include <linux/serial_reg.h> -#include <asm/arch/hardware.h> +#include <asm/arch/serial.h> unsigned int system_rev; @@ -34,8 +34,9 @@ static void putstr(const char *s) { volatile u8 * uart = 0; - int shift; + int shift = 2; +#ifdef CONFIG_ARCH_OMAP #ifdef CONFIG_OMAP_LL_DEBUG_UART3 uart = (volatile u8 *)(OMAP_UART3_BASE); #elif CONFIG_OMAP_LL_DEBUG_UART2 @@ -44,6 +45,7 @@ putstr(const char *s) uart = (volatile u8 *)(OMAP_UART1_BASE); #endif +#ifdef CONFIG_ARCH_OMAP1 /* Determine which serial port to use */ do { /* MMU is not on, so cpu_is_omapXXXX() won't work here */ @@ -51,14 +53,14 @@ putstr(const char *s) if (omap_id == OMAP_ID_730) shift = 0; - else - shift = 2; if (check_port(uart, shift)) break; /* Silent boot if no serial ports are enabled. */ return; } while (0); +#endif /* CONFIG_ARCH_OMAP1 */ +#endif /* * Now, xmit each character diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h index 1438c6cef0ca..054fb9a8e0c6 100644 --- a/include/asm-arm/arch-omap/usb.h +++ b/include/asm-arm/arch-omap/usb.h @@ -47,6 +47,15 @@ # define HMC_TLLATTACH (1 << 6) # define OTG_HMC(w) (((w)>>0)&0x3f) #define OTG_CTRL_REG OTG_REG32(0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) # define OTG_ASESSVLD (1 << 20) # define OTG_BSESSEND (1 << 19) # define OTG_BSESSVLD (1 << 18) diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h index 324db06b5dd4..4b7aa0b8391e 100644 --- a/include/asm-arm/arch-pxa/corgi.h +++ b/include/asm-arm/arch-pxa/corgi.h @@ -103,18 +103,20 @@ * Shared data structures */ extern struct platform_device corgiscoop_device; +extern struct platform_device corgissp_device; +extern struct platform_device corgifb_device; /* * External Functions */ extern unsigned long corgi_ssp_ads7846_putget(unsigned long); extern unsigned long corgi_ssp_ads7846_get(void); -extern void corgi_ssp_ads7846_put(ulong data); +extern void corgi_ssp_ads7846_put(unsigned long data); extern void corgi_ssp_ads7846_lock(void); extern void corgi_ssp_ads7846_unlock(void); -extern void corgi_ssp_lcdtg_send (u8 adrs, u8 data); +extern void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); extern void corgi_ssp_blduty_set(int duty); -extern int corgi_ssp_max1111_get(ulong data); +extern int corgi_ssp_max1111_get(unsigned long data); #endif /* __ASM_ARCH_CORGI_H */ diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S index f288e74b67c2..b6ec68879176 100644 --- a/include/asm-arm/arch-pxa/debug-macro.S +++ b/include/asm-arm/arch-pxa/debug-macro.S @@ -11,6 +11,8 @@ * */ +#include "hardware.h" + .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 72b04d846a23..cf35721cfa45 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -44,24 +44,12 @@ #ifndef __ASSEMBLY__ -#if 0 -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -#else -/* - * This __REG() version gives the same results as the one above, except - * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc - * doesn't guess this by itself. - */ -#include <asm/types.h> -typedef struct { volatile u32 offset[4096]; } __regbase; -# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] -# define __REG(x) __REGP(io_p2v(x)) -#endif +# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) +# define __REG2(x,y) \ + (*(volatile unsigned long *)((unsigned long)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h index 7492ea7ea614..88c17dd02ed2 100644 --- a/include/asm-arm/arch-pxa/mmc.h +++ b/include/asm-arm/arch-pxa/mmc.h @@ -9,7 +9,9 @@ struct mmc_host; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ + unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ int (*init)(struct device *, irqreturn_t (*)(int, void *, struct pt_regs *), void *); + int (*get_ro)(struct device *); void (*setpower)(struct device *, unsigned int); void (*exit)(struct device *, void *); }; diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h new file mode 100644 index 000000000000..8704dbceb432 --- /dev/null +++ b/include/asm-arm/arch-pxa/mtd-xip.h @@ -0,0 +1,37 @@ +/* + * MTD primitives for XIP support. Architecture specific functions + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __ARCH_PXA_MTD_XIP_H__ +#define __ARCH_PXA_MTD_XIP_H__ + +#include <asm/arch/pxa-regs.h> + +#define xip_irqpending() (ICIP & ICMR) + +/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ +#define xip_currtime() (OSCR) +#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * As above, this should not rely upon standard kernel code. + */ + +#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) + +#endif /* __ARCH_PXA_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index b5e54a9e9fa7..939d9e5020a0 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -818,6 +818,23 @@ #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */ +#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ + +#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ +#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ +#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ +#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ +#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ +#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ +#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ +#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ +#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ +#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ +#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ +#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ +#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ +#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ + #define UDCCSN(x) __REG2(0x40600100, (x) << 2) #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ #define UDCCSR0_SA (1 << 7) /* Setup Active */ @@ -1423,6 +1440,7 @@ #define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) #define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) @@ -1505,10 +1523,13 @@ #define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ +#define PSSR_STS (1 << 3) /* Standby Mode Status */ #define PSSR_VFS (1 << 2) /* VDD Fault Status */ #define PSSR_BFS (1 << 1) /* Battery Fault Status */ #define PSSR_SSS (1 << 0) /* Software Sleep Status */ +#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ + #define PCFR_RO (1 << 15) /* RDH Override */ #define PCFR_PO (1 << 14) /* PH Override */ #define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ @@ -1516,6 +1537,7 @@ #define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ #define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ #define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ +#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ #define PCFR_DS (1 << 3) /* Deep Sleep Mode */ #define PCFR_FS (1 << 2) /* Float Static Chip Selects */ #define PCFR_FP (1 << 1) /* Float PCMCIA controls */ @@ -1809,6 +1831,11 @@ #define LCCR0_PDD_S 12 #define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#define LCCR0_LCDT (1 << 22) /* LCD panel type */ +#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ +#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ +#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ +#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ #define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ #define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ @@ -1965,6 +1992,7 @@ #define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ #define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ +#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ #define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ #define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ #define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ @@ -2060,7 +2088,10 @@ #define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ #define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ #define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ + #define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ + #define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ #define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ #define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h new file mode 100644 index 000000000000..5675b1796b55 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/anubis-cpld.h @@ -0,0 +1,24 @@ +/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h + * + * (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * ANUBIS - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * +*/ + +#ifndef __ASM_ARCH_ANUBISCPLD_H +#define __ASM_ARCH_ANUBISCPLD_H + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define ANUBIS_CTRL1_NANDSEL (0x3) + +#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h new file mode 100644 index 000000000000..82f15dbd97e8 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/anubis-irq.h @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h + * + * (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * ANUBIS - IRQ Number definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + */ + +#ifndef __ASM_ARCH_ANUBISIRQ_H +#define __ASM_ARCH_ANUBISIRQ_H + +#define IRQ_IDE0 IRQ_EINT2 +#define IRQ_IDE1 IRQ_EINT3 +#define IRQ_ASIX IRQ_EINT1 + +#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h new file mode 100644 index 000000000000..97741d6e506a --- /dev/null +++ b/include/asm-arm/arch-s3c2410/anubis-map.h @@ -0,0 +1,46 @@ +/* linux/include/asm-arm/arch-s3c2410/anubis-map.h + * + * (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * ANUBIS - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: +*/ + +/* needs arch/map.h including with this */ + +#ifndef __ASM_ARCH_ANUBISMAP_H +#define __ASM_ARCH_ANUBISMAP_H + +/* start peripherals off after the S3C2410 */ + +#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x02000000)) + +#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01300000 */ +#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) + +#define ANUBIS_VA_CTRL2 ANUBIS_IOADDR(0x00100000) /* 0x01400000 */ +#define ANUBIS_PA_CTRL2 (ANUBIS_PA_CPLD) + +#define ANUBIS_VA_CTRL3 ANUBIS_IOADDR(0x00200000) /* 0x01500000 */ +#define ANUBIS_PA_CTRL3 (ANUBIS_PA_CPLD) + +#define ANUBIS_VA_CTRL4 ANUBIS_IOADDR(0x00300000) /* 0x01600000 */ +#define ANUBIS_PA_CTRL4 (ANUBIS_PA_CPLD) + +#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) +#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) +#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) +#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) + +#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h new file mode 100644 index 000000000000..0d276e67f2fb --- /dev/null +++ b/include/asm-arm/arch-s3c2410/audio.h @@ -0,0 +1,49 @@ +/* linux/include/asm-arm/arch-s3c2410/audio.h + * + * (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - Audio platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 20-Nov-2004 BJD Created file + * 07-Mar-2005 BJD Added suspend/resume calls +*/ + +#ifndef __ASM_ARCH_AUDIO_H +#define __ASM_ARCH_AUDIO_H __FILE__ + +/* struct s3c24xx_iis_ops + * + * called from the s3c24xx audio core to deal with the architecture + * or the codec's setup and control. + * + * the pointer to itself is passed through in case the caller wants to + * embed this in an larger structure for easy reference to it's context. +*/ + +struct s3c24xx_iis_ops { + struct module *owner; + + int (*startup)(struct s3c24xx_iis_ops *me); + void (*shutdown)(struct s3c24xx_iis_ops *me); + int (*suspend)(struct s3c24xx_iis_ops *me); + int (*resume)(struct s3c24xx_iis_ops *me); + + int (*open)(struct s3c24xx_iis_ops *me, snd_pcm_substream_t *strm); + int (*close)(struct s3c24xx_iis_ops *me, snd_pcm_substream_t *strm); + int (*prepare)(struct s3c24xx_iis_ops *me, snd_pcm_substream_t *strm, snd_pcm_runtime_t *rt); +}; + +struct s3c24xx_platdata_iis { + const char *codec_clk; + struct s3c24xx_iis_ops *ops; + int (*match_dev)(struct device *dev); +}; + +#endif /* __ASM_ARCH_AUDIO_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index e5e938b79acc..16f4c3cc1388 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -1,7 +1,7 @@ /* linux/include/asm/arch-s3c2410/regs-clock.h * - * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ + * Copyright (c) 2003,2004,2005 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,6 +17,7 @@ * 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion * 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat) * 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA + * 27-Aug-2005 Ben Dooks Add clock-slow info */ #ifndef __ASM_ARM_REGS_CLOCK @@ -74,6 +75,12 @@ #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) +#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) +#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) +#define S3C2410_CLKSLOW_SLOW (1<<4) +#define S3C2410_CLKSLOW_SLOWVAL(x) (x) +#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) + #ifndef __ASSEMBLY__ static inline unsigned int diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h index 385b07d510da..fdd62e8cd6cb 100644 --- a/include/asm-arm/arch-s3c2410/regs-iis.h +++ b/include/asm-arm/arch-s3c2410/regs-iis.h @@ -15,6 +15,9 @@ * 12-03-2004 BJD Updated include protection * 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL * 05-04-2005 LCVR Added IISFCON definitions for the S3C2400 + * 18-07-2005 DA Change IISCON_MPLL to IISMOD_MPLL + * Correct IISMOD_256FS and IISMOD_384FS + * Add IISCON_PSCEN */ #ifndef __ASM_ARCH_REGS_IIS_H @@ -22,7 +25,6 @@ #define S3C2410_IISCON (0x00) -#define S3C2440_IISCON_MPLL (1<<9) #define S3C2410_IISCON_LRINDEX (1<<8) #define S3C2410_IISCON_TXFIFORDY (1<<7) #define S3C2410_IISCON_RXFIFORDY (1<<6) @@ -30,10 +32,12 @@ #define S3C2410_IISCON_RXDMAEN (1<<4) #define S3C2410_IISCON_TXIDLE (1<<3) #define S3C2410_IISCON_RXIDLE (1<<2) +#define S3C2410_IISCON_PSCEN (1<<1) #define S3C2410_IISCON_IISEN (1<<0) #define S3C2410_IISMOD (0x04) +#define S3C2440_IISMOD_MPLL (1<<9) #define S3C2410_IISMOD_SLAVE (1<<8) #define S3C2410_IISMOD_NOXFER (0<<6) #define S3C2410_IISMOD_RXMODE (1<<6) @@ -46,8 +50,8 @@ #define S3C2410_IISMOD_8BIT (0<<3) #define S3C2410_IISMOD_16BIT (1<<3) #define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<1) -#define S3C2410_IISMOD_384FS (1<<1) +#define S3C2410_IISMOD_256FS (0<<2) +#define S3C2410_IISMOD_384FS (1<<2) #define S3C2410_IISMOD_16FS (0<<0) #define S3C2410_IISMOD_32FS (1<<0) #define S3C2410_IISMOD_48FS (2<<0) diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h index 1cc85a096b23..bd43b566db3e 100644 --- a/include/asm-arm/arch-s3c2410/usb-control.h +++ b/include/asm-arm/arch-s3c2410/usb-control.h @@ -12,6 +12,7 @@ * Changelog: * 11-Sep-2004 BJD Created file * 21-Sep-2004 BJD Updated port info + * 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc */ #ifndef __ASM_ARCH_USBCONTROL_H @@ -35,7 +36,7 @@ struct s3c2410_hcd_info { void (*report_oc)(struct s3c2410_hcd_info *, int ports); }; -static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports) +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) { if (info->report_oc != NULL) { (info->report_oc)(info, ports); diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h index 10c62db34362..19c3b1e186bb 100644 --- a/include/asm-arm/arch-sa1100/hardware.h +++ b/include/asm-arm/arch-sa1100/hardware.h @@ -49,23 +49,9 @@ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START ) #ifndef __ASSEMBLY__ -#include <asm/types.h> -#if 0 -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -#else -/* - * This __REG() version gives the same results as the one above, except - * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc - * doesn't guess this by itself. - */ -typedef struct { volatile u32 offset[4096]; } __regbase; -# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] -# define __REG(x) __REGP(io_p2v(x)) -#endif - -# define __PREG(x) (io_v2p((u32)&(x))) +# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) +# define __PREG(x) (io_v2p((unsigned long)&(x))) #else diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h new file mode 100644 index 000000000000..f58a22755c61 --- /dev/null +++ b/include/asm-arm/arch-sa1100/mcp.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-sa1100/mcp.h + * + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_ARCH_MCP_H +#define __ASM_ARM_ARCH_MCP_H + +#include <linux/types.h> + +struct mcp_plat_data { + u32 mccr0; + u32 mccr1; + unsigned int sclk_rate; +}; + +#endif diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/include/asm-arm/arch-sa1100/mtd-xip.h new file mode 100644 index 000000000000..80cfdac2b944 --- /dev/null +++ b/include/asm-arm/arch-sa1100/mtd-xip.h @@ -0,0 +1,26 @@ +/* + * MTD primitives for XIP support. Architecture specific functions + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __ARCH_SA1100_MTD_XIP_H__ +#define __ARCH_SA1100_MTD_XIP_H__ + +#define xip_irqpending() (ICIP & ICMR) + +/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ +#define xip_currtime() (OSCR) +#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) + +#endif /* __ARCH_SA1100_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h index 1e7f26bc2e1d..5e6ed0038b2b 100644 --- a/include/asm-arm/arch-shark/io.h +++ b/include/asm-arm/arch-shark/io.h @@ -21,38 +21,8 @@ */ #define __PORT_PCIO(x) (!((x) & 0x80000000)) -/* - * Dynamic IO functions - let the compiler - * optimize the expressions - */ -#define DECLARE_DYN_OUT(fnsuffix,instr) \ -static inline void __out##fnsuffix (unsigned int value, unsigned int port) \ -{ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "str" instr " %1, [%0, %2] @ out" #fnsuffix \ - : "=&r" (temp) \ - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ -} +#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} static inline unsigned int __ioaddr (unsigned int port) \ { \ @@ -62,123 +32,8 @@ static inline unsigned int __ioaddr (unsigned int port) \ return (unsigned int)(IO_BASE + (port)); \ } -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_OUT(fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"h") -DECLARE_IO(long,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_OUT -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" (port)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" (port)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" (port)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" (port)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" (port)); \ - else \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v|v<<16), "r" (IO_BASE), "r" (port)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" (port)); \ - else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" (port)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" (port)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (IO_BASE), "r" (port)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" (port)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" (port)); \ - result; \ -}) - -#define __ioaddrc(port) \ -({ \ - unsigned long addr; \ - if (__PORT_PCIO((port))) \ - addr = PCIO_BASE + (port); \ - else \ - addr = IO_BASE + (port); \ - addr; \ -}) - #define __mem_pci(addr) (addr) -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) - /* * Translated address IO functions * diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h index d5fb4a251e7f..41c1bee342ad 100644 --- a/include/asm-arm/arch-versatile/hardware.h +++ b/include/asm-arm/arch-versatile/hardware.h @@ -25,19 +25,26 @@ #include <asm/sizes.h> #include <asm/arch/platform.h> -// FIXME = PCI settings need to be fixed!!!!! - /* - * Similar to above, but for PCI addresses (memory, IO, Config and the - * V3 chip itself). WARNING: this has to mirror definitions in platform.h + * PCI space virtual addresses */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 +#define VERSATILE_PCI_VIRT_BASE 0xe8000000 +#define VERSATILE_PCI_CFG_VIRT_BASE 0xe9000000 + +#if 0 +#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000 +#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000 +#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000 + +#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0 +#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1 +#endif + +/* CIK guesswork */ +#define PCIBIOS_MIN_IO 0x44000000 +#define PCIBIOS_MIN_MEM 0x50000000 -#define PCIO_BASE PCI_IO_VADDR -#define PCIMEM_BASE PCI_MEMORY_VADDR +#define pcibios_assign_all_busses() 1 /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h index dbb7158788fc..9f895bf61494 100644 --- a/include/asm-arm/arch-versatile/io.h +++ b/include/asm-arm/arch-versatile/io.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff +#define IO_SPACE_LIMIT 0xffffffff #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h index 2598d1f08548..cbdd9fb96332 100644 --- a/include/asm-arm/arch-versatile/platform.h +++ b/include/asm-arm/arch-versatile/platform.h @@ -76,7 +76,7 @@ #define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38 #define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C #define VERSATILE_SYS_RESETCTL_OFFSET 0x40 -#define VERSATILE_SYS_PICCTL_OFFSET 0x44 +#define VERSATILE_SYS_PCICTL_OFFSET 0x44 #define VERSATILE_SYS_MCI_OFFSET 0x48 #define VERSATILE_SYS_FLASH_OFFSET 0x4C #define VERSATILE_SYS_CLCD_OFFSET 0x50 @@ -114,7 +114,7 @@ #define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET) #define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET) #define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET) -#define VERSATILE_SYS_PICCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PICCTL_OFFSET) +#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET) #define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET) #define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) #define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET) @@ -225,7 +225,20 @@ #define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */ #define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ #define VERSATILE_MBX_BASE 0x40000000 /* MBX */ + +/* PCI space */ #define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */ +#define VERSATILE_PCI_CFG_BASE 0x42000000 +#define VERSATILE_PCI_MEM_BASE0 0x44000000 +#define VERSATILE_PCI_MEM_BASE1 0x50000000 +#define VERSATILE_PCI_MEM_BASE2 0x60000000 +/* Sizes of above maps */ +#define VERSATILE_PCI_BASE_SIZE 0x01000000 +#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000 +#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ +#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ +#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ + #define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ #define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */ @@ -498,11 +511,17 @@ /* * IB2 Versatile/AB expansion board definitions */ -#define VERSATILE_IB2_CAMERA_BANK 0x24000000 -#define VERSATILE_IB2_KBD_DATAREG 0x25000000 -#define VERSATILE_IB2_IER 0x26000000 /* for VICINTSOURCE27 */ -#define VERSATILE_IB2_CTRL 0x27000000 -#define VERSATILE_IB2_STAT 0x27000004 +#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE +#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000) + +/* VICINTSOURCE27 */ +#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000) +#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0) +#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4) + +#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) +#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0) +#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4) #endif #endif diff --git a/include/asm-arm/auxvec.h b/include/asm-arm/auxvec.h new file mode 100644 index 000000000000..c0536f6b29a7 --- /dev/null +++ b/include/asm-arm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMARM_AUXVEC_H +#define __ASMARM_AUXVEC_H + +#endif diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index 4edd4dc40c5b..aad7aad026b3 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -21,8 +21,8 @@ #include <asm/system.h> -#define smp_mb__before_clear_bit() do { } while (0) -#define smp_mb__after_clear_bit() do { } while (0) +#define smp_mb__before_clear_bit() mb() +#define smp_mb__after_clear_bit() mb() /* * These functions are the basis of our bit ops. @@ -229,6 +229,7 @@ extern int _find_next_zero_bit_be(const void * p, int size, int offset); extern int _find_first_bit_be(const unsigned long *p, unsigned size); extern int _find_next_bit_be(const unsigned long *p, int size, int offset); +#ifndef CONFIG_SMP /* * The __* form of bitops are non-atomic and may be reordered. */ @@ -241,6 +242,10 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); (__builtin_constant_p(nr) ? \ ____atomic_##name(nr, p) : \ _##name##_be(nr,p)) +#else +#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p) +#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p) +#endif #define NONATOMIC_BITOP(name,nr,p) \ (____nonatomic_##name(nr, p)) diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h index 24d11672eb60..7fb02138f585 100644 --- a/include/asm-arm/bug.h +++ b/include/asm-arm/bug.h @@ -5,7 +5,7 @@ #ifdef CONFIG_BUG #ifdef CONFIG_DEBUG_BUGVERBOSE -extern volatile void __bug(const char *file, int line, void *data); +extern void __bug(const char *file, int line, void *data) __attribute__((noreturn)); /* give file/line information */ #define BUG() __bug(__FILE__, __LINE__, NULL) diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 09ffeed507c2..e81baff4f54b 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -16,6 +16,9 @@ #include <asm/mman.h> #include <asm/glue.h> +#include <asm/shmparam.h> + +#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) /* * Cache Model @@ -253,7 +256,7 @@ extern void dmac_flush_range(unsigned long, unsigned long); * Convert calls to our calling convention. */ #define flush_cache_all() __cpuc_flush_kern_all() - +#ifndef CONFIG_CPU_CACHE_VIPT static inline void flush_cache_mm(struct mm_struct *mm) { if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) @@ -276,6 +279,11 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); } } +#else +extern void flush_cache_mm(struct mm_struct *mm); +extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); +#endif /* * flush_cache_user_range is used when we want to ensure that the diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h index ff48022e4720..4679f63688e9 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/include/asm-arm/cpu-multi32.h @@ -31,7 +31,7 @@ extern struct processor { /* * Special stuff for a reset */ - volatile void (*reset)(unsigned long addr); + void (*reset)(unsigned long addr) __attribute__((noreturn)); /* * Idle the processor */ diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h index b5ec5d54665d..6723e67244fa 100644 --- a/include/asm-arm/cpu-single.h +++ b/include/asm-arm/cpu-single.h @@ -41,4 +41,4 @@ extern int cpu_do_idle(void); extern void cpu_dcache_clean_area(void *, int); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_set_pte(pte_t *ptep, pte_t pte); -extern volatile void cpu_reset(unsigned long addr); +extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/include/asm-arm/emergency-restart.h b/include/asm-arm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/include/asm-arm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-arm/fcntl.h b/include/asm-arm/fcntl.h index 485b6bdf4d7a..a80b6607b2ef 100644 --- a/include/asm-arm/fcntl.h +++ b/include/asm-arm/fcntl.h @@ -1,87 +1,11 @@ #ifndef _ARM_FCNTL_H #define _ARM_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ -#define O_ACCMODE 0003 -#define O_RDONLY 00 -#define O_WRONLY 01 -#define O_RDWR 02 -#define O_CREAT 0100 /* not fcntl */ -#define O_EXCL 0200 /* not fcntl */ -#define O_NOCTTY 0400 /* not fcntl */ -#define O_TRUNC 01000 /* not fcntl */ -#define O_APPEND 02000 -#define O_NONBLOCK 04000 -#define O_NDELAY O_NONBLOCK -#define O_SYNC 010000 -#define FASYNC 020000 /* fcntl, for BSD compatibility */ #define O_DIRECTORY 040000 /* must be a directory */ #define O_NOFOLLOW 0100000 /* don't follow links */ #define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ #define O_LARGEFILE 0400000 -#define O_NOATIME 01000000 -#define F_DUPFD 0 /* dup */ -#define F_GETFD 1 /* get close_on_exec */ -#define F_SETFD 2 /* set/clear close_on_exec */ -#define F_GETFL 3 /* get file->f_flags */ -#define F_SETFL 4 /* set file->f_flags */ -#define F_GETLK 5 -#define F_SETLK 6 -#define F_SETLKW 7 +#include <asm-generic/fcntl.h> -#define F_SETOWN 8 /* for sockets. */ -#define F_GETOWN 9 /* for sockets. */ -#define F_SETSIG 10 /* for sockets. */ -#define F_GETSIG 11 /* for sockets. */ - -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 - -/* for F_[GET|SET]FL */ -#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ - -/* for posix fcntl() and lockf() */ -#define F_RDLCK 0 -#define F_WRLCK 1 -#define F_UNLCK 2 - -/* for old implementation of bsd flock () */ -#define F_EXLCK 4 /* or 3 */ -#define F_SHLCK 8 /* or 4 */ - -/* for leases */ -#define F_INPROGRESS 16 - -/* operations for bsd flock(), also used by the kernel implementation */ -#define LOCK_SH 1 /* shared lock */ -#define LOCK_EX 2 /* exclusive lock */ -#define LOCK_NB 4 /* or'd with one of the above to prevent - blocking */ -#define LOCK_UN 8 /* remove lock */ - -#define LOCK_MAND 32 /* This is a mandatory flock */ -#define LOCK_READ 64 /* ... Which allows concurrent read operations */ -#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ -#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ - -struct flock { - short l_type; - short l_whence; - off_t l_start; - off_t l_len; - pid_t l_pid; -}; - -struct flock64 { - short l_type; - short l_whence; - loff_t l_start; - loff_t l_len; - pid_t l_pid; -}; - -#define F_LINUX_SPECIFIC_BASE 1024 #endif diff --git a/include/asm-arm/futex.h b/include/asm-arm/futex.h new file mode 100644 index 000000000000..2cac5ecd9d00 --- /dev/null +++ b/include/asm-arm/futex.h @@ -0,0 +1,53 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#ifdef __KERNEL__ + +#include <linux/futex.h> +#include <asm/errno.h> +#include <asm/uaccess.h> + +static inline int +futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret, tem; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + inc_preempt_count(); + + switch (op) { + case FUTEX_OP_SET: + case FUTEX_OP_ADD: + case FUTEX_OP_OR: + case FUTEX_OP_ANDN: + case FUTEX_OP_XOR: + default: + ret = -ENOSYS; + } + + dec_preempt_count(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +#endif +#endif diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h new file mode 100644 index 000000000000..04be3bdf46b8 --- /dev/null +++ b/include/asm-arm/hardware/arm_timer.h @@ -0,0 +1,21 @@ +#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H +#define __ASM_ARM_HARDWARE_ARM_TIMER_H + +#define TIMER_LOAD 0x00 +#define TIMER_VALUE 0x04 +#define TIMER_CTRL 0x08 +#define TIMER_CTRL_ONESHOT (1 << 0) +#define TIMER_CTRL_32BIT (1 << 1) +#define TIMER_CTRL_DIV1 (0 << 2) +#define TIMER_CTRL_DIV16 (1 << 2) +#define TIMER_CTRL_DIV256 (2 << 2) +#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ +#define TIMER_CTRL_PERIODIC (1 << 6) +#define TIMER_CTRL_ENABLE (1 << 7) + +#define TIMER_INTCLR 0x0c +#define TIMER_RIS 0x10 +#define TIMER_MIS 0x14 +#define TIMER_BGLOAD 0x18 + +#endif diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h new file mode 100644 index 000000000000..3fa5eb70f64e --- /dev/null +++ b/include/asm-arm/hardware/gic.h @@ -0,0 +1,41 @@ +/* + * linux/include/asm-arm/hardware/gic.h + * + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_HARDWARE_GIC_H +#define __ASM_ARM_HARDWARE_GIC_H + +#include <linux/compiler.h> + +#define GIC_CPU_CTRL 0x00 +#define GIC_CPU_PRIMASK 0x04 +#define GIC_CPU_BINPOINT 0x08 +#define GIC_CPU_INTACK 0x0c +#define GIC_CPU_EOI 0x10 +#define GIC_CPU_RUNNINGPRI 0x14 +#define GIC_CPU_HIGHPRI 0x18 + +#define GIC_DIST_CTRL 0x000 +#define GIC_DIST_CTR 0x004 +#define GIC_DIST_ENABLE_SET 0x100 +#define GIC_DIST_ENABLE_CLEAR 0x180 +#define GIC_DIST_PENDING_SET 0x200 +#define GIC_DIST_PENDING_CLEAR 0x280 +#define GIC_DIST_ACTIVE_BIT 0x300 +#define GIC_DIST_PRI 0x400 +#define GIC_DIST_TARGET 0x800 +#define GIC_DIST_CONFIG 0xc00 +#define GIC_DIST_SOFTINT 0xf00 + +#ifndef __ASSEMBLY__ +void gic_dist_init(void __iomem *base); +void gic_cpu_init(void __iomem *base); +void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +#endif + +#endif diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h index 7ea771ff6144..527404b5a8df 100644 --- a/include/asm-arm/hardware/scoop.h +++ b/include/asm-arm/hardware/scoop.h @@ -40,6 +40,19 @@ struct scoop_config { unsigned short io_dir; }; +/* Structure for linking scoop devices to PCMCIA sockets */ +struct scoop_pcmcia_dev { + struct device *dev; /* Pointer to this socket's scoop device */ + int irq; /* irq for socket */ + int cd_irq; + const char *cd_irq_str; + unsigned char keep_vs; + unsigned char keep_rd; +}; + +extern int scoop_num; +extern struct scoop_pcmcia_dev *scoop_devs; + void reset_scoop(struct device *dev); unsigned short set_scoop_gpio(struct device *dev, unsigned short bit); unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit); diff --git a/include/asm-arm/hdreg.h b/include/asm-arm/hdreg.h deleted file mode 100644 index 7f7fd1af0af3..000000000000 --- a/include/asm-arm/hdreg.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/hdreg.h> diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h index 2114acb3d237..4f68c8a5a199 100644 --- a/include/asm-arm/ide.h +++ b/include/asm-arm/ide.h @@ -5,7 +5,7 @@ */ /* - * This file contains the i386 architecture specific IDE code. + * This file contains the ARM architecture specific IDE code. */ #ifndef __ASMARM_IDE_H diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 658ffa384fda..cfa71a0dffb6 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -82,7 +82,7 @@ extern void __readwrite_bug(const char *fn); * only. Their primary purpose is to access PCI and ISA peripherals. * * Note that for a big endian machine, this implies that the following - * big endian mode connectivity is in place, as described by numerious + * big endian mode connectivity is in place, as described by numerous * ARM documents: * * PCI: D0-D7 D8-D15 D16-D23 D24-D31 @@ -273,6 +273,35 @@ extern void __iounmap(void __iomem *addr); #endif /* + * io{read,write}{8,16,32} macros + */ +#ifndef ioread8 +#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; }) +#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; }) + +#define iowrite8(v,p) __raw_writeb(v, p) +#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p) +#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p) + +#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) +#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) +#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) + +#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) +#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) +#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) + +extern void __iomem *ioport_map(unsigned long port, unsigned int nr); +extern void ioport_unmap(void __iomem *addr); +#endif + +struct pci_dev; + +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); + +/* * can the hardware map this into one segment or not, given no other * constraints. */ diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h index c26298f3891f..f08dc8447913 100644 --- a/include/asm-arm/locks.h +++ b/include/asm-arm/locks.h @@ -28,7 +28,8 @@ " blmi " #fail \ : \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ }) #define __down_op_ret(ptr,fail) \ @@ -48,12 +49,14 @@ " mov %0, ip" \ : "=&r" (ret) \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ ret; \ }) #define __up_op(ptr,wake) \ ({ \ + smp_mb(); \ __asm__ __volatile__( \ "@ up_op\n" \ "1: ldrex lr, [%0]\n" \ @@ -61,12 +64,12 @@ " strex ip, lr, [%0]\n" \ " teq ip, #0\n" \ " bne 1b\n" \ -" teq lr, #0\n" \ +" cmp lr, #0\n" \ " movle ip, %0\n" \ " blle " #wake \ : \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ }) /* @@ -92,15 +95,17 @@ " blne " #fail \ : \ : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ }) #define __up_op_write(ptr,wake) \ ({ \ + smp_mb(); \ __asm__ __volatile__( \ "@ up_op_read\n" \ "1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ +" adds lr, lr, %1\n" \ " strex ip, lr, [%0]\n" \ " teq ip, #0\n" \ " bne 1b\n" \ @@ -108,7 +113,7 @@ " blcs " #wake \ : \ : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ }) #define __down_op_read(ptr,fail) \ @@ -116,6 +121,7 @@ #define __up_op_read(ptr,wake) \ ({ \ + smp_mb(); \ __asm__ __volatile__( \ "@ up_op_read\n" \ "1: ldrex lr, [%0]\n" \ @@ -128,7 +134,7 @@ " bleq " #wake \ : \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ }) #else @@ -148,7 +154,8 @@ " blmi " #fail \ : \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ }) #define __down_op_ret(ptr,fail) \ @@ -169,12 +176,14 @@ " mov %0, ip" \ : "=&r" (ret) \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ ret; \ }) #define __up_op(ptr,wake) \ ({ \ + smp_mb(); \ __asm__ __volatile__( \ "@ up_op\n" \ " mrs ip, cpsr\n" \ @@ -188,7 +197,7 @@ " blle " #wake \ : \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ }) /* @@ -215,7 +224,8 @@ " blne " #fail \ : \ : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ }) #define __up_op_write(ptr,wake) \ @@ -233,7 +243,8 @@ " blcs " #wake \ : \ : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ + smp_mb(); \ }) #define __down_op_read(ptr,fail) \ @@ -241,6 +252,7 @@ #define __up_op_read(ptr,wake) \ ({ \ + smp_mb(); \ __asm__ __volatile__( \ "@ up_op_read\n" \ " mrs ip, cpsr\n" \ @@ -254,7 +266,7 @@ " bleq " #wake \ : \ : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc", "memory"); \ + : "ip", "lr", "cc"); \ }) #endif diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index 3a32e929ec8c..56c6bf4ab0c3 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -26,7 +26,7 @@ struct machine_desc { * page tabe entry */ const char *name; /* architecture name */ - unsigned int param_offset; /* parameter page */ + unsigned long boot_params; /* tagged list */ unsigned int video_start; /* start of video RAM */ unsigned int video_end; /* end of video RAM */ @@ -54,38 +54,6 @@ const struct machine_desc __mach_desc_##_type \ .nr = MACH_TYPE_##_type, \ .name = _name, -#define MAINTAINER(n) - -#define BOOT_MEM(_pram,_pio,_vio) \ - .phys_ram = _pram, \ - .phys_io = _pio, \ - .io_pg_offst = ((_vio)>>18)&0xfffc, - -#define BOOT_PARAMS(_params) \ - .param_offset = _params, - -#define VIDEO(_start,_end) \ - .video_start = _start, \ - .video_end = _end, - -#define DISABLE_PARPORT(_n) \ - .reserve_lp##_n = 1, - -#define SOFT_REBOOT \ - .soft_reboot = 1, - -#define FIXUP(_func) \ - .fixup = _func, - -#define MAPIO(_func) \ - .map_io = _func, - -#define INITIRQ(_func) \ - .init_irq = _func, - -#define INIT_MACHINE(_func) \ - .init_machine = _func, - #define MACHINE_END \ }; diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h index a43a353f6c7b..0ce6ca588d8c 100644 --- a/include/asm-arm/mach/irq.h +++ b/include/asm-arm/mach/irq.h @@ -42,11 +42,11 @@ struct irqchip { /* * Set the type of the IRQ. */ - int (*type)(unsigned int, unsigned int); + int (*set_type)(unsigned int, unsigned int); /* * Set wakeup-enable on the selected IRQ */ - int (*wake)(unsigned int, unsigned int); + int (*set_wake)(unsigned int, unsigned int); #ifdef CONFIG_SMP /* @@ -92,6 +92,14 @@ struct irqdesc { extern struct irqdesc irq_desc[]; /* + * Helpful inline function for calling irq descriptor handlers. + */ +static inline void desc_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + desc->handle(irq, desc, regs); +} + +/* * This is internal. Do not use it. */ extern void (*init_arch_irq)(void); diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index 5cf4fd659fd5..96c6db7dd0e1 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -39,8 +39,29 @@ struct sys_timer { void (*suspend)(void); void (*resume)(void); unsigned long (*offset)(void); + +#ifdef CONFIG_NO_IDLE_HZ + struct dyn_tick_timer *dyn_tick; +#endif +}; + +#ifdef CONFIG_NO_IDLE_HZ + +#define DYN_TICK_ENABLED (1 << 1) + +struct dyn_tick_timer { + unsigned int state; /* Current state */ + int (*enable)(void); /* Enables dynamic tick */ + int (*disable)(void); /* Disables dynamic tick */ + void (*reprogram)(unsigned long); /* Reprograms the timer */ + int (*handler)(int, void *, struct pt_regs *); }; +void timer_dyn_reprogram(void); +#else +#define timer_dyn_reprogram() do { } while (0) +#endif + extern struct sys_timer *system_timer; extern void timer_tick(struct pt_regs *); diff --git a/include/asm-arm/mtd-xip.h b/include/asm-arm/mtd-xip.h new file mode 100644 index 000000000000..9eb127cc7db2 --- /dev/null +++ b/include/asm-arm/mtd-xip.h @@ -0,0 +1,26 @@ +/* + * MTD primitives for XIP support. Architecture specific functions + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __ARM_MTD_XIP_H__ +#define __ARM_MTD_XIP_H__ + +#include <asm/hardware.h> +#include <asm/arch/mtd-xip.h> + +/* fill instruction prefetch */ +#define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0) + +#endif /* __ARM_MTD_XIP_H__ */ diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 019c45d75730..4da1d532cbeb 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -163,20 +163,6 @@ typedef unsigned long pgprot_t; /* the upper-most page table pointer */ extern pmd_t *top_pmd; -/* Pure 2^n version of get_order */ -static inline int get_order(unsigned long size) -{ - int order; - - size = (size-1) >> (PAGE_SHIFT-1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - #include <asm/memory.h> #endif /* !__ASSEMBLY__ */ @@ -186,4 +172,6 @@ static inline int get_order(unsigned long size) #endif /* __KERNEL__ */ +#include <asm-generic/page.h> + #endif diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h index 40ffaefbeb1a..38ea5899a580 100644 --- a/include/asm-arm/pci.h +++ b/include/asm-arm/pci.h @@ -14,7 +14,7 @@ static inline void pcibios_set_master(struct pci_dev *dev) /* No special bus mastering setup handling */ } -static inline void pcibios_penalize_isa_irq(int irq) +static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ } @@ -42,6 +42,16 @@ static inline void pcibios_penalize_isa_irq(int irq) #define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + #define HAVE_PCI_MMAP extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); @@ -50,6 +60,10 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res); +extern void +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + static inline void pcibios_add_platform_entries(struct pci_dev *dev) { } diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h index e814f8144f8b..bc18ff405181 100644 --- a/include/asm-arm/pgalloc.h +++ b/include/asm-arm/pgalloc.h @@ -89,6 +89,13 @@ static inline void pte_free(struct page *pte) __free_page(pte); } +static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) +{ + pmdp[0] = __pmd(pmdval); + pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); + flush_pmd_entry(pmdp); +} + /* * Populate the pmdp entry with a pointer to the pte. This pmd is part * of the mm address space. @@ -99,32 +106,19 @@ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) { unsigned long pte_ptr = (unsigned long)ptep; - unsigned long pmdval; - - BUG_ON(mm != &init_mm); /* * The pmd must be loaded with the physical * address of the PTE table */ pte_ptr -= PTRS_PER_PTE * sizeof(void *); - pmdval = __pa(pte_ptr) | _PAGE_KERNEL_TABLE; - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); + __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); } static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep) { - unsigned long pmdval; - - BUG_ON(mm == &init_mm); - - pmdval = page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE; - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); + __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); } #endif diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index a9892eb42a23..478c49b56e18 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -188,12 +188,18 @@ extern void __pgd_error(const char *file, int line, unsigned long val); /* * - extended small page/tiny page */ +#define PTE_EXT_XN (1 << 0) /* v6 */ #define PTE_EXT_AP_MASK (3 << 4) +#define PTE_EXT_AP0 (1 << 4) +#define PTE_EXT_AP1 (2 << 4) #define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (1 << 4) -#define PTE_EXT_AP_URO_SRW (2 << 4) -#define PTE_EXT_AP_URW_SRW (3 << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) #define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ +#define PTE_EXT_APX (1 << 9) /* v6 */ +#define PTE_EXT_SHARED (1 << 10) /* v6 */ +#define PTE_EXT_NG (1 << 11) /* v6 */ /* * - small page @@ -224,6 +230,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define L_PTE_WRITE (1 << 5) #define L_PTE_EXEC (1 << 6) #define L_PTE_DIRTY (1 << 7) +#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */ +#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */ #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/signal.h b/include/asm-arm/signal.h index 46e69ae395af..760f6e65af05 100644 --- a/include/asm-arm/signal.h +++ b/include/asm-arm/signal.h @@ -114,6 +114,7 @@ typedef unsigned long sigset_t; #define SIGSTKSZ 8192 #ifdef __KERNEL__ +#define SA_TIMER 0x40000000 #define SA_IRQNOMASK 0x08000000 #endif diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h index f21fd8f6bcdd..dbb4d859c586 100644 --- a/include/asm-arm/smp.h +++ b/include/asm-arm/smp.h @@ -21,10 +21,7 @@ # error "<asm-arm/smp.h> included in non-SMP build" #endif -#define smp_processor_id() (current_thread_info()->cpu) - -extern cpumask_t cpu_present_mask; -#define cpu_possible_map cpu_present_mask +#define raw_smp_processor_id() (current_thread_info()->cpu) /* * at the moment, there's not a big penalty for changing CPUs @@ -55,4 +52,18 @@ extern void smp_cross_call(cpumask_t callmap); */ extern int boot_secondary(unsigned int cpu, struct task_struct *); +/* + * Perform platform specific initialisation of the specified CPU. + */ +extern void platform_secondary_init(unsigned int cpu); + +/* + * Initial data for bringing up a secondary CPU. + */ +struct secondary_data { + unsigned long pgdir; + void *stack; +}; +extern struct secondary_data secondary_data; + #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/include/asm-arm/socket.h b/include/asm-arm/socket.h index 46d20585d951..3c51da6438c9 100644 --- a/include/asm-arm/socket.h +++ b/include/asm-arm/socket.h @@ -14,6 +14,8 @@ #define SO_BROADCAST 6 #define SO_SNDBUF 7 #define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 #define SO_KEEPALIVE 9 #define SO_OOBINLINE 10 #define SO_NO_CHECK 11 diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h index 182323619caa..1f906d09b688 100644 --- a/include/asm-arm/spinlock.h +++ b/include/asm-arm/spinlock.h @@ -8,9 +8,10 @@ /* * ARMv6 Spin-locking. * - * We (exclusively) read the old value, and decrement it. If it - * hits zero, we may have won the lock, so we try (exclusively) - * storing it. + * We exclusively read the old value. If it is zero, we may have + * won the lock, so we try exclusively storing it. A memory barrier + * is required after we get a lock, and before we release it, because + * V6 CPUs are assumed to have weakly ordered memory. * * Unlocked value: 0 * Locked value: 1 @@ -41,7 +42,9 @@ static inline void _raw_spin_lock(spinlock_t *lock) " bne 1b" : "=&r" (tmp) : "r" (&lock->lock), "r" (1) - : "cc", "memory"); + : "cc"); + + smp_mb(); } static inline int _raw_spin_trylock(spinlock_t *lock) @@ -54,18 +57,25 @@ static inline int _raw_spin_trylock(spinlock_t *lock) " strexeq %0, %2, [%1]" : "=&r" (tmp) : "r" (&lock->lock), "r" (1) - : "cc", "memory"); - - return tmp == 0; + : "cc"); + + if (tmp == 0) { + smp_mb(); + return 1; + } else { + return 0; + } } static inline void _raw_spin_unlock(spinlock_t *lock) { + smp_mb(); + __asm__ __volatile__( " str %1, [%0]" : : "r" (&lock->lock), "r" (0) - : "cc", "memory"); + : "cc"); } /* @@ -79,7 +89,8 @@ typedef struct { } rwlock_t; #define RW_LOCK_UNLOCKED (rwlock_t) { 0 } -#define rwlock_init(x) do { *(x) + RW_LOCK_UNLOCKED; } while (0) +#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while (0) +#define rwlock_is_locked(x) (*((volatile unsigned int *)(x)) != 0) /* * Write locks are easy - we just set bit 31. When unlocking, we can @@ -97,16 +108,40 @@ static inline void _raw_write_lock(rwlock_t *rw) " bne 1b" : "=&r" (tmp) : "r" (&rw->lock), "r" (0x80000000) - : "cc", "memory"); + : "cc"); + + smp_mb(); +} + +static inline int _raw_write_trylock(rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__( +"1: ldrex %0, [%1]\n" +" teq %0, #0\n" +" strexeq %0, %2, [%1]" + : "=&r" (tmp) + : "r" (&rw->lock), "r" (0x80000000) + : "cc"); + + if (tmp == 0) { + smp_mb(); + return 1; + } else { + return 0; + } } static inline void _raw_write_unlock(rwlock_t *rw) { + smp_mb(); + __asm__ __volatile__( "str %1, [%0]" : : "r" (&rw->lock), "r" (0) - : "cc", "memory"); + : "cc"); } /* @@ -133,11 +168,17 @@ static inline void _raw_read_lock(rwlock_t *rw) " bmi 1b" : "=&r" (tmp), "=&r" (tmp2) : "r" (&rw->lock) - : "cc", "memory"); + : "cc"); + + smp_mb(); } static inline void _raw_read_unlock(rwlock_t *rw) { + unsigned long tmp, tmp2; + + smp_mb(); + __asm__ __volatile__( "1: ldrex %0, [%2]\n" " sub %0, %0, #1\n" @@ -146,24 +187,9 @@ static inline void _raw_read_unlock(rwlock_t *rw) " bne 1b" : "=&r" (tmp), "=&r" (tmp2) : "r" (&rw->lock) - : "cc", "memory"); + : "cc"); } #define _raw_read_trylock(lock) generic_raw_read_trylock(lock) -static inline int _raw_write_trylock(rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc", "memory"); - - return tmp == 0; -} - #endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-arm/stat.h b/include/asm-arm/stat.h index ca8e7a8436da..ec4e2c2e3b47 100644 --- a/include/asm-arm/stat.h +++ b/include/asm-arm/stat.h @@ -89,6 +89,6 @@ struct stat64 { unsigned long st_ctime_nsec; unsigned long long st_ino; -}; +} __attribute__((packed)); #endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index b13a8da4847b..8efa4ebdcacb 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -85,7 +85,9 @@ struct pt_regs; void die(const char *msg, struct pt_regs *regs, int err) __attribute__((noreturn)); -void die_if_kernel(const char *str, struct pt_regs *regs, int err); +struct siginfo; +void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap); void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), @@ -104,6 +106,7 @@ extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); +extern void cpu_init(void); #define set_cr(x) \ __asm__ __volatile__( \ @@ -136,7 +139,12 @@ extern unsigned int user_debug; #define vectors_high() (0) #endif +#if __LINUX_ARM_ARCH__ >= 6 +#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ + : : "r" (0) : "memory") +#else #define mb() __asm__ __volatile__ ("" : : : "memory") +#endif #define rmb() mb() #define wmb() mb() #define read_barrier_depends() do { } while(0) @@ -144,34 +152,12 @@ extern unsigned int user_debug; #define set_wmb(var, value) do { var = value; wmb(); } while (0) #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); -#ifdef CONFIG_SMP -/* - * Define our own context switch locking. This allows us to enable - * interrupts over the context switch, otherwise we end up with high - * interrupt latency. The real problem area is switch_mm() which may - * do a full cache flush. - */ -#define prepare_arch_switch(rq,next) \ -do { \ - spin_lock(&(next)->switch_lock); \ - spin_unlock_irq(&(rq)->lock); \ -} while (0) - -#define finish_arch_switch(rq,prev) \ - spin_unlock(&(prev)->switch_lock) - -#define task_running(rq,p) \ - ((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock)) -#else /* - * Our UP-case is more simple, but we assume knowledge of how - * spin_unlock_irq() and friends are implemented. This avoids - * us needlessly decrementing and incrementing the preempt count. + * switch_mm() may do a full cache flush over the context switch, + * so enable interrupts over the context switch to avoid high + * latency. */ -#define prepare_arch_switch(rq,next) local_irq_enable() -#define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock) -#define task_running(rq,p) ((rq)->curr == (p)) -#endif +#define __ARCH_WANT_INTERRUPTS_ON_CTXSW /* * switch_to(prev, next) should switch from task `prev' to `next' @@ -307,11 +293,10 @@ do { \ ({ \ unsigned long flags; \ local_save_flags(flags); \ - flags & PSR_I_BIT; \ + (int)(flags & PSR_I_BIT); \ }) #ifdef CONFIG_SMP -#error SMP not supported #define smp_mb() mb() #define smp_rmb() rmb() @@ -325,6 +310,8 @@ do { \ #define smp_wmb() barrier() #define smp_read_barrier_depends() do { } while(0) +#endif /* CONFIG_SMP */ + #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) /* * On the StrongARM, "swp" is terminally broken since it bypasses the @@ -337,6 +324,9 @@ do { \ * * We choose (1) since its the "easiest" to achieve here and is not * dependent on the processor type. + * + * NOTE that this solution won't work on an SMP system, so explcitly + * forbid it here. */ #define swp_is_buggy #endif @@ -348,42 +338,73 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size #ifdef swp_is_buggy unsigned long flags; #endif +#if __LINUX_ARM_ARCH__ >= 6 + unsigned int tmp; +#endif switch (size) { -#ifdef swp_is_buggy - case 1: - local_irq_save(flags); - ret = *(volatile unsigned char *)ptr; - *(volatile unsigned char *)ptr = x; - local_irq_restore(flags); - break; - - case 4: - local_irq_save(flags); - ret = *(volatile unsigned long *)ptr; - *(volatile unsigned long *)ptr = x; - local_irq_restore(flags); - break; +#if __LINUX_ARM_ARCH__ >= 6 + case 1: + asm volatile("@ __xchg1\n" + "1: ldrexb %0, [%3]\n" + " strexb %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + "1: ldrex %0, [%3]\n" + " strex %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#elif defined(swp_is_buggy) +#ifdef CONFIG_SMP +#error SMP is not supported on this platform +#endif + case 1: + local_irq_save(flags); + ret = *(volatile unsigned char *)ptr; + *(volatile unsigned char *)ptr = x; + local_irq_restore(flags); + break; + + case 4: + local_irq_save(flags); + ret = *(volatile unsigned long *)ptr; + *(volatile unsigned long *)ptr = x; + local_irq_restore(flags); + break; #else - case 1: __asm__ __volatile__ ("swpb %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: __asm__ __volatile__ ("swp %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; + case 1: + asm volatile("@ __xchg1\n" + " swpb %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + " swp %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; #endif - default: __bad_xchg(ptr, size), ret = 0; + default: + __bad_xchg(ptr, size), ret = 0; + break; } return ret; } -#endif /* CONFIG_SMP */ - #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 66c585c50cf9..8252a4cd860f 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -49,7 +49,7 @@ struct cpu_context_save { */ struct thread_info { unsigned long flags; /* low level flags */ - __s32 preempt_count; /* 0 => preemptable, <0 => bug */ + int preempt_count; /* 0 => preemptable, <0 => bug */ mm_segment_t addr_limit; /* address limit */ struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index 8a864b118569..9387a5e1ffe0 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -235,7 +235,7 @@ extern struct cpu_tlb_fns cpu_tlb; #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) -static inline void flush_tlb_all(void) +static inline void local_flush_tlb_all(void) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -253,7 +253,7 @@ static inline void flush_tlb_all(void) asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero)); } -static inline void flush_tlb_mm(struct mm_struct *mm) +static inline void local_flush_tlb_mm(struct mm_struct *mm) { const int zero = 0; const int asid = ASID(mm); @@ -282,7 +282,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) } static inline void -flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -313,7 +313,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr)); } -static inline void flush_tlb_kernel_page(unsigned long kaddr) +static inline void local_flush_tlb_kernel_page(unsigned long kaddr) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -384,8 +384,24 @@ static inline void clean_pmd_entry(pmd_t *pmd) /* * Convert calls to our calling convention. */ -#define flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) -#define flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) +#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) +#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) + +#ifndef CONFIG_SMP +#define flush_tlb_all local_flush_tlb_all +#define flush_tlb_mm local_flush_tlb_mm +#define flush_tlb_page local_flush_tlb_page +#define flush_tlb_kernel_page local_flush_tlb_kernel_page +#define flush_tlb_range local_flush_tlb_range +#define flush_tlb_kernel_range local_flush_tlb_kernel_range +#else +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); +extern void flush_tlb_kernel_page(unsigned long kaddr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +#endif /* * if PG_dcache_dirty is set for the page, we need to ensure that any diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h index f4c92e4c8c02..22992ee0627a 100644 --- a/include/asm-arm/types.h +++ b/include/asm-arm/types.h @@ -52,8 +52,6 @@ typedef unsigned long long u64; typedef u32 dma_addr_t; typedef u32 dma64_addr_t; -typedef unsigned int kmem_bufctl_t; - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h index a7c018b8a0d4..a2fdad0138b3 100644 --- a/include/asm-arm/uaccess.h +++ b/include/asm-arm/uaccess.h @@ -77,12 +77,6 @@ static inline void set_fs (mm_segment_t fs) #define access_ok(type,addr,size) (__range_ok(addr,size) == 0) -/* this function will go away soon - use access_ok() instead */ -static inline int __deprecated verify_area(int type, const void __user *addr, unsigned long size) -{ - return access_ok(type, addr, size) ? 0 : -EFAULT; -} - /* * Single-value transfer routines. They automatically use the right * size if we just have the right pointer type. Note that the functions diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index ace27480886e..278de61224d1 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -295,7 +295,7 @@ #define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) #define __NR_tgkill (__NR_SYSCALL_BASE+268) #define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_fadvise64_64 (__NR_SYSCALL_BASE+270) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) #define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) #define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) #define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) @@ -350,6 +350,11 @@ #endif #define __NR_vserver (__NR_SYSCALL_BASE+313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) +#define __NR_inotify_init (__NR_SYSCALL_BASE+316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) /* * The following SWIs are ARM private. @@ -510,7 +515,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_NICE |
