diff options
Diffstat (limited to 'include/asm-arm/arch-pnx4008/gpio.h')
| -rw-r--r-- | include/asm-arm/arch-pnx4008/gpio.h | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h new file mode 100644 index 000000000000..d01bf83d55c2 --- /dev/null +++ b/include/asm-arm/arch-pnx4008/gpio.h @@ -0,0 +1,241 @@ +/* + * include/asm-arm/arch-pnx4008/gpio.h + * + * PNX4008 GPIO driver - header file + * + * Author: Dmitry Chigirev <source@mvista.com> + * + * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: + * Copyright (c) 2005 Koninklijke Philips Electronics N.V. + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef _PNX4008_GPIO_H_ +#define _PNX4008_GPIO_H_ + + +/* Block numbers */ +#define GPIO_IN (0) +#define GPIO_OUT (0x100) +#define GPIO_BID (0x200) +#define GPIO_RAM (0x300) +#define GPIO_MUX (0x400) + +#define GPIO_TYPE_MASK(K) ((K) & 0x700) + +/* INPUT GPIOs */ +/* GPI */ +#define GPI_00 (GPIO_IN | 0) +#define GPI_01 (GPIO_IN | 1) +#define GPI_02 (GPIO_IN | 2) +#define GPI_03 (GPIO_IN | 3) +#define GPI_04 (GPIO_IN | 4) +#define GPI_05 (GPIO_IN | 5) +#define GPI_06 (GPIO_IN | 6) +#define GPI_07 (GPIO_IN | 7) +#define GPI_08 (GPIO_IN | 8) +#define GPI_09 (GPIO_IN | 9) +#define U1_RX (GPIO_IN | 15) +#define U2_HTCS (GPIO_IN | 16) +#define U2_RX (GPIO_IN | 17) +#define U3_RX (GPIO_IN | 18) +#define U4_RX (GPIO_IN | 19) +#define U5_RX (GPIO_IN | 20) +#define U6_IRRX (GPIO_IN | 21) +#define U7_HCTS (GPIO_IN | 22) +#define U7_RX (GPIO_IN | 23) +/* MISC IN */ +#define SPI1_DATIN (GPIO_IN | 25) +#define DISP_SYNC (GPIO_IN | 26) +#define SPI2_DATIN (GPIO_IN | 27) +#define GPI_11 (GPIO_IN | 28) + +#define GPIO_IN_MASK 0x1eff83ff + +/* OUTPUT GPIOs */ +/* GPO */ +#define GPO_00 (GPIO_OUT | 0) +#define GPO_01 (GPIO_OUT | 1) +#define GPO_02 (GPIO_OUT | 2) +#define GPO_03 (GPIO_OUT | 3) +#define GPO_04 (GPIO_OUT | 4) +#define GPO_05 (GPIO_OUT | 5) +#define GPO_06 (GPIO_OUT | 6) +#define GPO_07 (GPIO_OUT | 7) +#define GPO_08 (GPIO_OUT | 8) +#define GPO_09 (GPIO_OUT | 9) +#define GPO_10 (GPIO_OUT | 10) +#define GPO_11 (GPIO_OUT | 11) +#define GPO_12 (GPIO_OUT | 12) +#define GPO_13 (GPIO_OUT | 13) +#define GPO_14 (GPIO_OUT | 14) +#define GPO_15 (GPIO_OUT | 15) +#define GPO_16 (GPIO_OUT | 16) +#define GPO_17 (GPIO_OUT | 17) +#define GPO_18 (GPIO_OUT | 18) +#define GPO_19 (GPIO_OUT | 19) +#define GPO_20 (GPIO_OUT | 20) +#define GPO_21 (GPIO_OUT | 21) +#define GPO_22 (GPIO_OUT | 22) +#define GPO_23 (GPIO_OUT | 23) + +#define GPIO_OUT_MASK 0xffffff + +/* BIDIRECTIONAL GPIOs */ +/* RAM pins */ +#define RAM_D19 (GPIO_RAM | 0) +#define RAM_D20 (GPIO_RAM | 1) +#define RAM_D21 (GPIO_RAM | 2) +#define RAM_D22 (GPIO_RAM | 3) +#define RAM_D23 (GPIO_RAM | 4) +#define RAM_D24 (GPIO_RAM | 5) +#define RAM_D25 (GPIO_RAM | 6) +#define RAM_D26 (GPIO_RAM | 7) +#define RAM_D27 (GPIO_RAM | 8) +#define RAM_D28 (GPIO_RAM | 9) +#define RAM_D29 (GPIO_RAM | 10) +#define RAM_D30 (GPIO_RAM | 11) +#define RAM_D31 (GPIO_RAM | 12) + +#define GPIO_RAM_MASK 0x1fff + +/* I/O pins */ +#define GPIO_00 (GPIO_BID | 25) +#define GPIO_01 (GPIO_BID | 26) +#define GPIO_02 (GPIO_BID | 27) +#define GPIO_03 (GPIO_BID | 28) +#define GPIO_04 (GPIO_BID | 29) +#define GPIO_05 (GPIO_BID | 30) + +#define GPIO_BID_MASK 0x7e000000 + +/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ +#define GPIO_SDRAM_SEL (GPIO_MUX | 3) + +#define GPIO_MUX_MASK 0x8 + +/* Extraction/assembly macros */ +#define GPIO_BIT_MASK(K) ((K) & 0x1F) +#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) +#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) +#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) +#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) +#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) +#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) + +/* Start Enable Pin Interrupts - table 58 page 66 */ + +#define SE_PIN_BASE_INT 32 + +#define SE_U7_RX_INT 63 +#define SE_U7_HCTS_INT 62 +#define SE_BT_CLKREQ_INT 61 +#define SE_U6_IRRX_INT 60 +/*59 unused*/ +#define SE_U5_RX_INT 58 +#define SE_GPI_11_INT 57 +#define SE_U3_RX_INT 56 +#define SE_U2_HCTS_INT 55 +#define SE_U2_RX_INT 54 +#define SE_U1_RX_INT 53 +#define SE_DISP_SYNC_INT 52 +/*51 unused*/ +#define SE_SDIO_INT_N 50 +#define SE_MSDIO_START_INT 49 +#define SE_GPI_06_INT 48 +#define SE_GPI_05_INT 47 +#define SE_GPI_04_INT 46 +#define SE_GPI_03_INT 45 +#define SE_GPI_02_INT 44 +#define SE_GPI_01_INT 43 +#define SE_GPI_00_INT 42 +#define SE_SYSCLKEN_PIN_INT 41 +#define SE_SPI1_DATAIN_INT 40 +#define SE_GPI_07_INT 39 +#define SE_SPI2_DATAIN_INT 38 +#define SE_GPI_10_INT 37 +#define SE_GPI_09_INT 36 +#define SE_GPI_08_INT 35 +/*34-32 unused*/ + +/* Start Enable Internal Interrupts - table 57 page 65 */ + +#define SE_INT_BASE_INT 0 + +#define SE_TS_IRQ 31 +#define SE_TS_P_INT 30 +#define SE_TS_AUX_INT 29 +/*27-28 unused*/ +#define SE_USB_AHB_NEED_CLK_INT 26 +#define SE_MSTIMER_INT 25 +#define SE_RTC_INT 24 +#define SE_USB_NEED_CLK_INT 23 +#define SE_USB_INT 22 +#define SE_USB_I2C_INT 21 +#define SE_USB_OTG_TIMER_INT 20 +#define SE_USB_OTG_ATX_INT_N 19 +/*18 unused*/ +#define SE_DSP_GPIO4_INT 17 +#define SE_KEY_IRQ 16 +#define SE_DSP_SLAVEPORT_INT 15 +#define SE_DSP_GPIO1_INT 14 +#define SE_DSP_GPIO0_INT 13 +#define SE_DSP_AHB_INT 12 +/*11-6 unused*/ +#define SE_GPIO_05_INT 5 +#define SE_GPIO_04_INT 4 +#define SE_GPIO_03_INT 3 +#define SE_GPIO_02_INT 2 +#define SE_GPIO_01_INT 1 +#define SE_GPIO_00_INT 0 + +#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) + +#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) +#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) +#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) +#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) + +extern int pnx4008_gpio_register_pin(unsigned short pin); +extern int pnx4008_gpio_unregister_pin(unsigned short pin); +extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); +extern int pnx4008_gpio_write_pin(unsigned short pin, int output); +extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); +extern int pnx4008_gpio_read_pin_direction(unsigned short pin); +extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); +extern int pnx4008_gpio_read_pin_mux(unsigned short pin); + +static inline void start_int_umask(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | + START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); +} + +static inline void start_int_mask(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & + ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); +} + +static inline void start_int_ack(u8 irq) +{ + __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); +} + +static inline void start_int_set_falling_edge(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & + ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); +} + +static inline void start_int_set_rising_edge(u8 irq) +{ + __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | + START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); +} + +#endif /* _PNX4008_GPIO_H_ */ |
