diff options
Diffstat (limited to 'fs/ext4/indirect.c')
| -rw-r--r-- | fs/ext4/indirect.c | 1510 |
1 files changed, 1510 insertions, 0 deletions
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c new file mode 100644 index 000000000000..c3e85a86e821 --- /dev/null +++ b/fs/ext4/indirect.c @@ -0,0 +1,1510 @@ +/* + * linux/fs/ext4/indirect.c + * + * from + * + * linux/fs/ext4/inode.c + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/fs/minix/inode.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Goal-directed block allocation by Stephen Tweedie + * (sct@redhat.com), 1993, 1998 + */ + +#include <linux/module.h> +#include "ext4_jbd2.h" +#include "truncate.h" + +#include <trace/events/ext4.h> + +typedef struct { + __le32 *p; + __le32 key; + struct buffer_head *bh; +} Indirect; + +static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) +{ + p->key = *(p->p = v); + p->bh = bh; +} + +/** + * ext4_block_to_path - parse the block number into array of offsets + * @inode: inode in question (we are only interested in its superblock) + * @i_block: block number to be parsed + * @offsets: array to store the offsets in + * @boundary: set this non-zero if the referred-to block is likely to be + * followed (on disk) by an indirect block. + * + * To store the locations of file's data ext4 uses a data structure common + * for UNIX filesystems - tree of pointers anchored in the inode, with + * data blocks at leaves and indirect blocks in intermediate nodes. + * This function translates the block number into path in that tree - + * return value is the path length and @offsets[n] is the offset of + * pointer to (n+1)th node in the nth one. If @block is out of range + * (negative or too large) warning is printed and zero returned. + * + * Note: function doesn't find node addresses, so no IO is needed. All + * we need to know is the capacity of indirect blocks (taken from the + * inode->i_sb). + */ + +/* + * Portability note: the last comparison (check that we fit into triple + * indirect block) is spelled differently, because otherwise on an + * architecture with 32-bit longs and 8Kb pages we might get into trouble + * if our filesystem had 8Kb blocks. We might use long long, but that would + * kill us on x86. Oh, well, at least the sign propagation does not matter - + * i_block would have to be negative in the very beginning, so we would not + * get there at all. + */ + +static int ext4_block_to_path(struct inode *inode, + ext4_lblk_t i_block, + ext4_lblk_t offsets[4], int *boundary) +{ + int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); + int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); + const long direct_blocks = EXT4_NDIR_BLOCKS, + indirect_blocks = ptrs, + double_blocks = (1 << (ptrs_bits * 2)); + int n = 0; + int final = 0; + + if (i_block < direct_blocks) { + offsets[n++] = i_block; + final = direct_blocks; + } else if ((i_block -= direct_blocks) < indirect_blocks) { + offsets[n++] = EXT4_IND_BLOCK; + offsets[n++] = i_block; + final = ptrs; + } else if ((i_block -= indirect_blocks) < double_blocks) { + offsets[n++] = EXT4_DIND_BLOCK; + offsets[n++] = i_block >> ptrs_bits; + offsets[n++] = i_block & (ptrs - 1); + final = ptrs; + } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { + offsets[n++] = EXT4_TIND_BLOCK; + offsets[n++] = i_block >> (ptrs_bits * 2); + offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); + offsets[n++] = i_block & (ptrs - 1); + final = ptrs; + } else { + ext4_warning(inode->i_sb, "block %lu > max in inode %lu", + i_block + direct_blocks + + indirect_blocks + double_blocks, inode->i_ino); + } + if (boundary) + *boundary = final - 1 - (i_block & (ptrs - 1)); + return n; +} + +/** + * ext4_get_branch - read the chain of indirect blocks leading to data + * @inode: inode in question + * @depth: depth of the chain (1 - direct pointer, etc.) + * @offsets: offsets of pointers in inode/indirect blocks + * @chain: place to store the result + * @err: here we store the error value + * + * Function fills the array of triples <key, p, bh> and returns %NULL + * if everything went OK or the pointer to the last filled triple + * (incomplete one) otherwise. Upon the return chain[i].key contains + * the number of (i+1)-th block in the chain (as it is stored in memory, + * i.e. little-endian 32-bit), chain[i].p contains the address of that + * number (it points into struct inode for i==0 and into the bh->b_data + * for i>0) and chain[i].bh points to the buffer_head of i-th indirect + * block for i>0 and NULL for i==0. In other words, it holds the block + * numbers of the chain, addresses they were taken from (and where we can + * verify that chain did not change) and buffer_heads hosting these + * numbers. + * + * Function stops when it stumbles upon zero pointer (absent block) + * (pointer to last triple returned, *@err == 0) + * or when it gets an IO error reading an indirect block + * (ditto, *@err == -EIO) + * or when it reads all @depth-1 indirect blocks successfully and finds + * the whole chain, all way to the data (returns %NULL, *err == 0). + * + * Need to be called with + * down_read(&EXT4_I(inode)->i_data_sem) + */ +static Indirect *ext4_get_branch(struct inode *inode, int depth, + ext4_lblk_t *offsets, + Indirect chain[4], int *err) +{ + struct super_block *sb = inode->i_sb; + Indirect *p = chain; + struct buffer_head *bh; + + *err = 0; + /* i_data is not going away, no lock needed */ + add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); + if (!p->key) + goto no_block; + while (--depth) { + bh = sb_getblk(sb, le32_to_cpu(p->key)); + if (unlikely(!bh)) + goto failure; + + if (!bh_uptodate_or_lock(bh)) { + if (bh_submit_read(bh) < 0) { + put_bh(bh); + goto failure; + } + /* validate block references */ + if (ext4_check_indirect_blockref(inode, bh)) { + put_bh(bh); + goto failure; + } + } + + add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); + /* Reader: end */ + if (!p->key) + goto no_block; + } + return NULL; + +failure: + *err = -EIO; +no_block: + return p; +} + +/** + * ext4_find_near - find a place for allocation with sufficient locality + * @inode: owner + * @ind: descriptor of indirect block. + * + * This function returns the preferred place for block allocation. + * It is used when heuristic for sequential allocation fails. + * Rules are: + * + if there is a block to the left of our position - allocate near it. + * + if pointer will live in indirect block - allocate near that block. + * + if pointer will live in inode - allocate in the same + * cylinder group. + * + * In the latter case we colour the starting block by the callers PID to + * prevent it from clashing with concurrent allocations for a different inode + * in the same block group. The PID is used here so that functionally related + * files will be close-by on-disk. + * + * Caller must make sure that @ind is valid and will stay that way. + */ +static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) +{ + struct ext4_inode_info *ei = EXT4_I(inode); + __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; + __le32 *p; + ext4_fsblk_t bg_start; + ext4_fsblk_t last_block; + ext4_grpblk_t colour; + ext4_group_t block_group; + int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); + + /* Try to find previous block */ + for (p = ind->p - 1; p >= start; p--) { + if (*p) + return le32_to_cpu(*p); + } + + /* No such thing, so let's try location of indirect block */ + if (ind->bh) + return ind->bh->b_blocknr; + + /* + * It is going to be referred to from the inode itself? OK, just put it + * into the same cylinder group then. + */ + block_group = ei->i_block_group; + if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { + block_group &= ~(flex_size-1); + if (S_ISREG(inode->i_mode)) + block_group++; + } + bg_start = ext4_group_first_block_no(inode->i_sb, block_group); + last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; + + /* + * If we are doing delayed allocation, we don't need take + * colour into account. + */ + if (test_opt(inode->i_sb, DELALLOC)) + return bg_start; + + if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) + colour = (current->pid % 16) * + (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); + else + colour = (current->pid % 16) * ((last_block - bg_start) / 16); + return bg_start + colour; +} + +/** + * ext4_find_goal - find a preferred place for allocation. + * @inode: owner + * @block: block we want + * @partial: pointer to the last triple within a chain + * + * Normally this function find the preferred place for block allocation, + * returns it. + * Because this is only used for non-extent files, we limit the block nr + * to 32 bits. + */ +static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, + Indirect *partial) +{ + ext4_fsblk_t goal; + + /* + * XXX need to get goal block from mballoc's data structures + */ + + goal = ext4_find_near(inode, partial); + goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; + return goal; +} + +/** + * ext4_blks_to_allocate - Look up the block map and count the number + * of direct blocks need to be allocated for the given branch. + * + * @branch: chain of indirect blocks + * @k: number of blocks need for indirect blocks + * @blks: number of data blocks to be mapped. + * @blocks_to_boundary: the offset in the indirect block + * + * return the total number of blocks to be allocate, including the + * direct and indirect blocks. + */ +static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, + int blocks_to_boundary) +{ + unsigned int count = 0; + + /* + * Simple case, [t,d]Indirect block(s) has not allocated yet + * then it's clear blocks on that path have not allocated + */ + if (k > 0) { + /* right now we don't handle cross boundary allocation */ + if (blks < blocks_to_boundary + 1) + count += blks; + else + count += blocks_to_boundary + 1; + return count; + } + + count++; + while (count < blks && count <= blocks_to_boundary && + le32_to_cpu(*(branch[0].p + count)) == 0) { + count++; + } + return count; +} + +/** + * ext4_alloc_blocks: multiple allocate blocks needed for a branch + * @handle: handle for this transaction + * @inode: inode which needs allocated blocks + * @iblock: the logical block to start allocated at + * @goal: preferred physical block of allocation + * @indirect_blks: the number of blocks need to allocate for indirect + * blocks + * @blks: number of desired blocks + * @new_blocks: on return it will store the new block numbers for + * the indirect blocks(if needed) and the first direct block, + * @err: on return it will store the error code + * + * This function will return the number of blocks allocated as + * requested by the passed-in parameters. + */ +static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, + ext4_lblk_t iblock, ext4_fsblk_t goal, + int indirect_blks, int blks, + ext4_fsblk_t new_blocks[4], int *err) +{ + struct ext4_allocation_request ar; + int target, i; + unsigned long count = 0, blk_allocated = 0; + int index = 0; + ext4_fsblk_t current_block = 0; + int ret = 0; + + /* + * Here we try to allocate the requested multiple blocks at once, + * on a best-effort basis. + * To build a branch, we should allocate blocks for + * the indirect blocks(if not allocated yet), and at least + * the first direct block of this branch. That's the + * minimum number of blocks need to allocate(required) + */ + /* first we try to allocate the indirect blocks */ + target = indirect_blks; + while (target > 0) { + count = target; + /* allocating blocks for indirect blocks and direct blocks */ + current_block = ext4_new_meta_blocks(handle, inode, goal, + 0, &count, err); + if (*err) + goto failed_out; + + if (unlikely(current_block + count > EXT4_MAX_BLOCK_FILE_PHYS)) { + EXT4_ERROR_INODE(inode, + "current_block %llu + count %lu > %d!", + current_block, count, + EXT4_MAX_BLOCK_FILE_PHYS); + *err = -EIO; + goto failed_out; + } + + target -= count; + /* allocate blocks for indirect blocks */ + while (index < indirect_blks && count) { + new_blocks[index++] = current_block++; + count--; + } + if (count > 0) { + /* + * save the new block number + * for the first direct block + */ + new_blocks[index] = current_block; + printk(KERN_INFO "%s returned more blocks than " + "requested\n", __func__); + WARN_ON(1); + break; + } + } + + target = blks - count ; + blk_allocated = count; + if (!target) + goto allocated; + /* Now allocate data blocks */ + memset(&ar, 0, sizeof(ar)); + ar.inode = inode; + ar.goal = goal; + ar.len = target; + ar.logical = iblock; + if (S_ISREG(inode->i_mode)) + /* enable in-core preallocation only for regular files */ + ar.flags = EXT4_MB_HINT_DATA; + + current_block = ext4_mb_new_blocks(handle, &ar, err); + if (unlikely(current_block + ar.len > EXT4_MAX_BLOCK_FILE_PHYS)) { + EXT4_ERROR_INODE(inode, + "current_block %llu + ar.len %d > %d!", + current_block, ar.len, + EXT4_MAX_BLOCK_FILE_PHYS); + *err = -EIO; + goto failed_out; + } + + if (*err && (target == blks)) { + /* + * if the allocation failed and we didn't allocate + * any blocks before + */ + goto failed_out; + } + if (!*err) { + if (target == blks) { + /* + * save the new block number + * for the first direct block + */ + new_blocks[index] = current_block; + } + blk_allocated += ar.len; + } +allocated: + /* total number of blocks allocated for direct blocks */ + ret = blk_allocated; + *err = 0; + return ret; +failed_out: + for (i = 0; i < index; i++) + ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0); + return ret; +} + +/** + * ext4_alloc_branch - allocate and set up a chain of blocks. + * @handle: handle for this transaction + * @inode: owner + * @indirect_blks: number of allocated indirect blocks + * @blks: number of allocated direct blocks + * @goal: preferred place for allocation + * @offsets: offsets (in the blocks) to store the pointers to next. + * @branch: place to store the chain in. + * + * This function allocates blocks, zeroes out all but the last one, + * links them into chain and (if we are synchronous) writes them to disk. + * In other words, it prepares a branch that can be spliced onto the + * inode. It stores the information about that chain in the branch[], in + * the same format as ext4_get_branch() would do. We are calling it after + * we had read the existing part of chain and partial points to the last + * triple of that (one with zero ->key). Upon the exit we have the same + * picture as after the successful ext4_get_block(), except that in one + * place chain is disconnected - *branch->p is still zero (we did not + * set the last link), but branch->key contains the number that should + * be placed into *branch->p to fill that gap. + * + * If allocation fails we free all blocks we've allocated (and forget + * their buffer_heads) and return the error value the from failed + * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain + * as described above and return 0. + */ +static int ext4_alloc_branch(handle_t *handle, struct inode *inode, + ext4_lblk_t iblock, int indirect_blks, + int *blks, ext4_fsblk_t goal, + ext4_lblk_t *offsets, Indirect *branch) +{ + int blocksize = inode->i_sb->s_blocksize; + int i, n = 0; + int err = 0; + struct buffer_head *bh; + int num; + ext4_fsblk_t new_blocks[4]; + ext4_fsblk_t current_block; + + num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, + *blks, new_blocks, &err); + if (err) + return err; + + branch[0].key = cpu_to_le32(new_blocks[0]); + /* + * metadata blocks and data blocks are allocated. + */ + for (n = 1; n <= indirect_blks; n++) { + /* + * Get buffer_head for parent block, zero it out + * and set the pointer to new one, then send + * parent to disk. + */ + bh = sb_getblk(inode->i_sb, new_blocks[n-1]); + if (unlikely(!bh)) { + err = -EIO; + goto failed; + } + + branch[n].bh = bh; + lock_buffer(bh); + BUFFER_TRACE(bh, "call get_create_access"); + err = ext4_journal_get_create_access(handle, bh); + if (err) { + /* Don't brelse(bh) here; it's done in + * ext4_journal_forget() below */ + unlock_buffer(bh); + goto failed; + } + + memset(bh->b_data, 0, blocksize); + branch[n].p = (__le32 *) bh->b_data + offsets[n]; + branch[n].key = cpu_to_le32(new_blocks[n]); + *branch[n].p = branch[n].key; + if (n == indirect_blks) { + current_block = new_blocks[n]; + /* + * End of chain, update the last new metablock of + * the chain to point to the new allocated + * data blocks numbers + */ + for (i = 1; i < num; i++) + *(branch[n].p + i) = cpu_to_le32(++current_block); + } + BUFFER_TRACE(bh, "marking uptodate"); + set_buffer_uptodate(bh); + unlock_buffer(bh); + + BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, inode, bh); + if (err) + goto failed; + } + *blks = num; + return err; +failed: + /* Allocation failed, free what we already allocated */ + ext4_free_blocks(handle, inode, NULL, new_blocks[0], 1, 0); + for (i = 1; i <= n ; i++) { + /* + * branch[i].bh is newly allocated, so there is no + * need to revoke the block, which is why we don't + * need to set EXT4_FREE_BLOCKS_METADATA. + */ + ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, + EXT4_FREE_BLOCKS_FORGET); + } + for (i = n+1; i < indirect_blks; i++) + ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0); + + ext4_free_blocks(handle, inode, NULL, new_blocks[i], num, 0); + + return err; +} + +/** + * ext4_splice_branch - splice the allocated branch onto inode. + * @handle: handle for this transaction + * @inode: owner + * @block: (logical) number of block we are adding + * @chain: chain of indirect blocks (with a missing link - see + * ext4_alloc_branch) + * @where: location of missing link + * @num: number of indirect blocks we are adding + * @blks: number of direct blocks we are adding + * + * This function fills the missing link and does all housekeeping needed in + * inode (->i_blocks, etc.). In case of success we end up with the full + * chain to new block and return 0. + */ +static int ext4_splice_branch(handle_t *handle, struct inode *inode, + ext4_lblk_t block, Indirect *where, int num, + int blks) +{ + int i; + int err = 0; + ext4_fsblk_t current_block; + + /* + * If we're splicing into a [td]indirect block (as opposed to the + * inode) then we need to get write access to the [td]indirect block + * before the splice. + */ + if (where->bh) { + BUFFER_TRACE(where->bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, where->bh); + if (err) + goto err_out; + } + /* That's it */ + + *where->p = where->key; + + /* + * Update the host buffer_head or inode to point to more just allocated + * direct blocks blocks + */ + if (num == 0 && blks > 1) { + current_block = le32_to_cpu(where->key) + 1; + for (i = 1; i < blks; i++) + *(where->p + i) = cpu_to_le32(current_block++); + } + + /* We are done with atomic stuff, now do the rest of housekeeping */ + /* had we spliced it onto indirect block? */ + if (where->bh) { + /* + * If we spliced it onto an indirect block, we haven't + * altered the inode. Note however that if it is being spliced + * onto an indirect block at the very end of the file (the + * file is growing) then we *will* alter the inode to reflect + * the new i_size. But that is not done here - it is done in + * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. + */ + jbd_debug(5, "splicing indirect only\n"); + BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, inode, where->bh); + if (err) + goto err_out; + } else { + /* + * OK, we spliced it into the inode itself on a direct block. + */ + ext4_mark_inode_dirty(handle, inode); + jbd_debug(5, "splicing direct\n"); + } + return err; + +err_out: + for (i = 1; i <= num; i++) { + /* + * branch[i].bh is newly allocated, so there is no + * need to revoke the block, which is why we don't + * need to set EXT4_FREE_BLOCKS_METADATA. + */ + ext4_free_blocks(handle, inode, where[i].bh, 0, 1, + EXT4_FREE_BLOCKS_FORGET); + } + ext4_free_blocks(handle, inode, NULL, le32_to_cpu(where[num].key), + blks, 0); + + return err; +} + +/* + * The ext4_ind_map_blocks() function handles non-extents inodes + * (i.e., using the traditional indirect/double-indirect i_blocks + * scheme) for ext4_map_blocks(). + * + * Allocation strategy is simple: if we have to allocate something, we will + * have to go the whole way to leaf. So let's do it before attaching anything + * to tree, set linkage between the newborn blocks, write them if sync is + * required, recheck the path, free and repeat if check fails, otherwise + * set the last missing link (that will protect us from any truncate-generated + * removals - all blocks on the path are immune now) and possibly force the + * write on the parent block. + * That has a nice additional property: no special recovery from the failed + * allocations is needed - we simply release blocks and do not touch anything + * reachable from inode. + * + * `handle' can be NULL if create == 0. + * + * return > 0, # of blocks mapped or allocated. + * return = 0, if plain lookup failed. + * return < 0, error case. + * + * The ext4_ind_get_blocks() function should be called with + * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem + * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or + * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system + * blocks. + */ +int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, + struct ext4_map_blocks *map, + int flags) +{ + int err = -EIO; + ext4_lblk_t offsets[4]; + Indirect chain[4]; + Indirect *partial; + ext4_fsblk_t goal; + int indirect_blks; + int blocks_to_boundary = 0; + int depth; + int count = 0; + ext4_fsblk_t first_block = 0; + + trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags); + J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))); + J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); + depth = ext4_block_to_path(inode, map->m_lblk, offsets, + &blocks_to_boundary); + + if (depth == 0) + goto out; + + partial = ext4_get_branch(inode, depth, offsets, chain, &err); + + /* Simplest case - block found, no allocation needed */ + if (!partial) { + first_block = le32_to_cpu(chain[depth - 1].key); + count++; + /*map more blocks*/ + while (count < map->m_len && count <= blocks_to_boundary) { + ext4_fsblk_t blk; + + blk = le32_to_cpu(*(chain[depth-1].p + count)); + + if (blk == first_block + count) + count++; + else + break; + } + goto got_it; + } + + /* Next simple case - plain lookup or failed read of indirect block */ + if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) + goto cleanup; + + /* + * Okay, we need to do block allocation. + */ + goal = ext4_find_goal(inode, map->m_lblk, partial); + + /* the number of blocks need to allocate for [d,t]indirect blocks */ + indirect_blks = (chain + depth) - partial - 1; + + /* + * Next look up the indirect map to count the totoal number of + * direct blocks to allocate for this branch. + */ + count = ext4_blks_to_allocate(partial, indirect_blks, + map->m_len, blocks_to_boundary); + /* + * Block out ext4_truncate while we alter the tree + */ + err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks, + &count, goal, + offsets + (partial - chain), partial); + + /* + * The ext4_splice_branch call will free and forget any buffers + * on the new chain if there is a failure, but that risks using + * up transaction credits, especially for bitmaps where the + * credits cannot be returned. Can we handle this somehow? We + * may need to return -EAGAIN upwards in the worst case. --sct + */ + if (!err) + err = ext4_splice_branch(handle, inode, map->m_lblk, + partial, indirect_blks, count); + if (err) + goto cleanup; + + map->m_flags |= EXT4_MAP_NEW; + + ext4_update_inode_fsync_trans(handle, inode, 1); +got_it: + map->m_flags |= EXT4_MAP_MAPPED; + map->m_pblk = le32_to_cpu(chain[depth-1].key); + map->m_len = count; + if (count > blocks_to_boundary) + map->m_flags |= EXT4_MAP_BOUNDARY; + err = count; + /* Clean up and exit */ + partial = chain + depth - 1; /* the whole chain */ +cleanup: + while (partial > chain) { + BUFFER_TRACE(partial->bh, "call brelse"); + brelse(partial->bh); + partial--; + } +out: + trace_ext4_ind_map_blocks_exit(inode, map->m_lblk, + map->m_pblk, map->m_len, err); + return err; +} + +/* + * O_DIRECT for ext3 (or indirect map) based files + * + * If the O_DIRECT write will extend the file then add this inode to the + * orphan list. So recovery will truncate it back to the original size + * if the machine crashes during the write. + * + * If the O_DIRECT write is intantiating holes inside i_size and the machine + * crashes then stale disk data _may_ be exposed inside the file. But current + * VFS code falls back into buffered path in that case so we are safe. + */ +ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, + const struct iovec *iov, loff_t offset, + unsigned long nr_segs) +{ + struct file *file = iocb->ki_filp; + struct inode *inode = file->f_mapping->host; + struct ext4_inode_info *ei = EXT4_I(inode); + handle_t *handle; + ssize_t ret; + int orphan = 0; + size_t count = iov_length(iov, nr_segs); + int retries = 0; + + if (rw == WRITE) { + loff_t final_size = offset + count; + + if (final_size > inode->i_size) { + /* Credits for sb + inode write */ + handle = ext4_journal_start(inode, 2); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + goto out; + } + ret = ext4_orphan_add(handle, inode); + if (ret) { + ext4_journal_stop(handle); + goto out; + } + orphan = 1; + ei->i_disksize = inode->i_size; + ext4_journal_stop(handle); + } + } + +retry: + if (rw == READ && ext4_should_dioread_nolock(inode)) + ret = __blockdev_direct_IO(rw, iocb, inode, + inode->i_sb->s_bdev, iov, + offset, nr_segs, + ext4_get_block, NULL, NULL, 0); + else { + ret = blockdev_direct_IO(rw, iocb, inode, + inode->i_sb->s_bdev, iov, + offset, nr_segs, + ext4_get_block, NULL); + + if (unlikely((rw & WRITE) && ret < 0)) { + loff_t isize = i_size_read(inode); + loff_t end = offset + iov_length(iov, nr_segs); + + if (end > isize) + ext4_truncate_failed_write(inode); + } + } + if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) + goto retry; + + if (orphan) { + int err; + + /* Credits for sb + inode write */ + handle = ext4_journal_start(inode, 2); + if (IS_ERR(handle)) { + /* This is really bad luck. We've written the data + * but cannot extend i_size. Bail out and pretend + * the write failed... */ + ret = PTR_ERR(handle); + if (inode->i_nlink) + ext4_orphan_del(NULL, inode); + + goto out; + } + if (inode->i_nlink) + ext4_orphan_del(handle, inode); + if (ret > 0) { + loff_t end = offset + ret; + if (end > inode->i_size) { + ei->i_disksize = end; + i_size_write(inode, end); + /* + * We're going to return a positive `ret' + * here due to non-zero-length I/O, so there's + * no way of reporting error returns from + * ext4_mark_inode_dirty() to userspace. So + * ignore it. + */ + ext4_mark_inode_dirty(handle, inode); + } + } + err = ext4_journal_stop(handle); + if (ret == 0) + ret = err; + } +out: + return ret; +} + +/* + * Calculate the number of metadata blocks need to reserve + * to allocate a new block at @lblocks for non extent file based file + */ +int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock) +{ + struct ext4_inode_info *ei = EXT4_I(inode); + sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1); + int blk_bits; + + if (lblock < EXT4_NDIR_BLOCKS) + return 0; + + lblock -= EXT4_NDIR_BLOCKS; + + if (ei->i_da_metadata_calc_len && + (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) { + ei->i_da_metadata_calc_len++; + return 0; + } + ei->i_da_metadata_calc_last_lblock = lblock & dind_mask; + ei->i_da_metadata_calc_len = 1; + blk_bits = order_base_2(lblock); + return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1; +} + +int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk) +{ + int indirects; + + /* if nrblocks are contiguous */ + if (chunk) { + /* + * With N contiguous data blocks, we need at most + * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks, + * 2 dindirect blocks, and 1 tindirect block + */ + return DIV_ROUND_UP(nrblocks, + EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4; + } + /* + * if nrblocks are not contiguous, worse case, each block touch + * a indirect block, and each indirect block touch a double indirect + * block, plus a triple indirect block + */ + indirects = nrblocks * 2 + 1; + return indirects; +} + +/* + * Truncate transactions can be complex and absolutely huge. So we need to + * be able to restart the transaction at a conventient checkpoint to make + * sure we don't overflow the journal. + * + * start_transaction gets us a new handle for a truncate transaction, + * and extend_transaction tries to extend the existing one a bit. If + * extend fails, we need to propagate the failure up and restart the + * transaction in the top-level truncate loop. --sct + */ +static handle_t *start_transaction(struct inode *inode) +{ + handle_t *result; + + result = ext4_journal_start(inode, ext4_blocks_for_truncate(inode)); + if (!IS_ERR(result)) + return result; + + ext4_std_error(inode->i_sb, PTR_ERR(result)); + return result; +} + +/* + * Try to extend this transaction for the purposes of truncation. + * + * Returns 0 if we managed to create more room. If we can't create more + * room, and the transaction must be restarted we return 1. + */ +static int try_to_extend_transaction(handle_t *handle, struct inode *inode) +{ + if (!ext4_handle_valid(handle)) + return 0; + if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) + return 0; + if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode))) + return 0; + return 1; +} + +/* + * Probably it should be a library function... search for first non-zero word + * or memcmp with zero_page, whatever is better for particular architecture. + * Linus? + */ +static inline int all_zeroes(__le32 *p, __le32 *q) +{ + while (p < q) + if (*p++) + return 0; + return 1; +} + +/** + * ext4_find_shared - find the indirect blocks for partial truncation. + * @inode: inode in question + * @depth: depth of the affected branch + * @offsets: offsets of pointers in that branch (see ext4_block_to_path) + * @chain: place to store the pointers to partial indirect blocks + * @top: place to the (detached) top of branch + * + * This is a helper function used by ext4_truncate(). + * + * When we do truncate() we may have to clean the ends of several + * indirect blocks but leave the blocks themselves alive. Block is + * partially truncated if some data below the new i_size is referred + * from it (and it is on the path to the first completely truncated + * data block, indeed). We have to free the top of that path along + * with everything to the right of the path. Since no allocation + * past the truncation point is possible until ext4_truncate() + * finishes, we may safely do the latter, but top of branch may + * require special attention - pageout below the truncation point + * might try to populate it. + * + * We atomically detach the top of branch from the tree, store the + * block number of its root in *@top, pointers to buffer_heads of + * partially truncated blocks - in @chain[].bh and pointers to + * their last elements that should not be removed - in + * @chain[].p. Return value is the pointer to last filled element + * of @chain. + * + * The work left to caller to do the actual freeing of subtrees: + * a) free the subtree starting from *@top + * b) free the subtrees whose roots are stored in + * (@chain[i].p+1 .. end of @chain[i].bh->b_data) + * c) free the subtrees growing from the inode past the @chain[0]. + * (no partially truncated stuff there). */ + +static Indirect *ext4_find_shared(struct inode *inode, int depth, + ext4_lblk_t offsets[4], Indirect chain[4], + __le32 *top) +{ + Indirect *partial, *p; + int k, err; + + *top = 0; + /* Make k index the deepest non-null offset + 1 */ + for (k = depth; k > 1 && !offsets[k-1]; k--) + ; + partial = ext4_get_branch(inode, k, offsets, chain, &err); + /* Writer: pointers */ + if (!partial) + partial = chain + k-1; + /* + * If the branch acquired continuation since we've looked at it - + * fine, it should all survive and (new) top doesn't belong to us. + */ + if (!partial->key && *partial->p) + /* Writer: end */ + goto no_top; + for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) + ; + /* + * OK, we've found the last block that must survive. The rest of our + * branch should be detached before unlocking. However, if that rest + * of branch is all ours and does not grow immediately from the inode + * it's easier to cheat and just decrement partial->p. + */ + if (p == chain + k - 1 && p > chain) { + p->p--; + } else { + *top = *p->p; + /* Nope, don't do this in ext4. Must leave the tree intact */ +#if 0 + *p->p = 0; +#endif + } + /* Writer: end */ + + while (partial > p) { + brelse(partial->bh); + partial--; + } +no_top: + return partial; +} + +/* + * Zero a number of block pointers in either an inode or an indirect block. + * If we restart the transaction we must again get write access to the + * indirect block for further modification. + * + * We release `count' blocks on disk, but (last - first) may be greater + * than `count' because there can be holes in there. + * + * Return 0 on success, 1 on invalid block range + * and < 0 on fatal error. + */ +static int ext4_clear_blocks(handle_t *handle, struct inode *inode, + struct buffer_head *bh, + ext4_fsblk_t block_to_free, + unsigned long count, __le32 *first, + __le32 *last) +{ + __le32 *p; + int flags = EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_VALIDATED; + int err; + + if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) + flags |= EXT4_FREE_BLOCKS_METADATA; + + if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free, + count)) { + EXT4_ERROR_INODE(inode, "attempt to clear invalid " + "blocks %llu len %lu", + (unsigned long long) block_to_free, count); + return 1; + } + + if (try_to_extend_transaction(handle, inode)) { + if (bh) { + BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, inode, bh); + if (unlikely(err)) + goto out_err; + } + err = ext4_mark_inode_dirty(handle, inode); + if (unlikely(err)) + goto out_err; + err = ext4_truncate_restart_trans(handle, inode, + ext4_blocks_for_truncate(inode)); + if (unlikely(err)) + goto out_err; + if (bh) { + BUFFER_TRACE(bh, "retaking write access"); + err = ext4_journal_get_write_access(handle, bh); + if (unlikely(err)) + goto out_err; + } + } + + for (p = first; p < last; p++) + *p = 0; + + ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags); + return 0; +out_err: + ext4_std_error(inode->i_sb, err); + return err; +} + +/** + * ext4_free_data - free a list of data blocks + * @handle: handle for this transaction + * @inode: inode we are dealing with + * @this_bh: indirect buffer_head which contains *@first and *@last + * @first: array of block numbers + * @last: points immediately past the end of array + * + * We are freeing all blocks referred from that array (numbers are stored as + * little-endian 32-bit) and updating @inode->i_blocks appropriately. + * + * We accumulate contiguous runs of blocks to free. Conveniently, if these + * blocks are contiguous then releasing them at one time will only affect one + * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't + * actually use a lot of journal space. + * + * @this_bh will be %NULL if @first and @last point into the inode's direct + * block pointers. + */ +static void ext4_free_data(handle_t *handle, struct inode *inode, + struct buffer_head *this_bh, + __le32 *first, __le32 *last) +{ + ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */ + unsigned long count = 0; /* Number of blocks in the run */ + __le32 *block_to_free_p = NULL; /* Pointer into inode/ind + corresponding to + block_to_free */ + ext4_fsblk_t nr; /* Current block # */ + __le32 *p; /* Pointer into inode/ind + for current block */ + int err = 0; + + if (this_bh) { /* For indirect block */ + BUFFER_TRACE(this_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, this_bh); + /* Important: if we can't update the indirect pointers + * to the blocks, we can't free them. */ + if (err) + return; + } + + for (p = first; p < last; p++) { + nr = le32_to_cpu(*p); + if (nr) { + /* accumulate blocks to free if they're contiguous */ + if (count == 0) { + block_to_free = nr; + block_to_free_p = p; + count = 1; + } else if (nr == block_to_free + count) { + count++; + } else { + err = ext4_clear_blocks(handle, inode, this_bh, + block_to_free, count, + block_to_free_p, p); + if (err) + break; + block_to_free = nr; + block_to_free_p = p; + count = 1; + } + } + } + + if (!err && count > 0) + err = ext4_clear_blocks(handle, inode, this_bh, block_to_free, + count, block_to_free_p, p); + if (err < 0) + /* fatal error */ + return; + + if (this_bh) { + BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); + + /* + * The buffer head should have an attached journal head at this + * point. However, if the data is corrupted and an indirect + * block pointed to itself, it would have been detached when + * the block was cleared. Check for this instead of OOPSing. + */ + if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) + ext4_handle_dirty_metadata(handle, inode, this_bh); + else + EXT4_ERROR_INODE(inode, + "circular indirect block detected at " + "block %llu", + (unsigned long long) this_bh->b_blocknr); + } +} + +/** + * ext4_free_branches - free an array of branches + * @handle: JBD handle for this transaction + * @inode: inode we are dealing with + * @parent_bh: the buffer_head which contains *@first and *@last + * @first: array of block numbers + * @last: pointer immediately past the end of array + * @depth: depth of the branches to free + * + * We are freeing all blocks referred from these branches (numbers are + * stored as little-endian 32-bit) and updating @inode->i_blocks + * appropriately. + */ +static void ext4_free_branches(handle_t *handle, struct inode *inode, + struct buffer_head *parent_bh, + __le32 *first, __le32 *last, int depth) +{ + ext4_fsblk_t nr; + __le32 *p; + + if (ext4_handle_is_aborted(handle)) + return; + + if (depth--) { + struct buffer_head *bh; + int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); + p = last; + while (--p >= first) { + nr = le32_to_cpu(*p); + if (!nr) + continue; /* A hole */ + + if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), + nr, 1)) { + EXT4_ERROR_INODE(inode, + "invalid indirect mapped " + "block %lu (level %d)", + (unsigned long) nr, depth); + break; + } + + /* Go read the buffer for the next level down */ + bh = sb_bread(inode->i_sb, nr); + + /* + * A read failure? Report error and clear slot + * (should be rare). + */ + if (!bh) { + EXT4_ERROR_INODE_BLOCK(inode, nr, + "Read failure"); + continue; + } + + /* This zaps the entire block. Bottom up. */ + BUFFER_TRACE(bh, "free child branches"); + ext4_free_branches(handle, inode, bh, + (__le32 *) bh->b_data, + (__le32 *) bh->b_data + addr_per_block, + depth); + brelse(bh); + + /* + * Everything below this this pointer has been + * released. Now let this top-of-subtree go. + * + * We want the freeing of this indirect block to be + * atomic in the journal with the updating of the + * bitmap block which owns it. So make some room in + * the journal. + * + * We zero the parent pointer *after* freeing its + * pointee in the bitmaps, so if extend_transaction() + * for some reason fails to put the bitmap changes and + * the release into the same transaction, recovery + * will merely complain about releasing a free block, + * rather than leaking blocks. + */ + if (ext4_handle_is_aborted(handle)) + return; + if (try_to_extend_transaction(handle, inode)) { + ext4_mark_inode_dirty(handle, inode); + ext4_truncate_restart_trans(handle, inode, + ext4_blocks_for_truncate(inode)); + } + + /* + * The forget flag here is critical because if + * we are journaling (and not doing data + * journaling), we have to make sure a revoke + * record is written to prevent the journal + * replay from overwriting the (former) + * indirect block if it gets reallocated as a + * data block. This must happen in the same + * transaction where the data blocks are + * actually freed. + */ + ext4_free_blocks(handle, inode, NULL, nr, 1, + EXT4_FREE_BLOCKS_METADATA| + EXT4_FREE_BLOCKS_FORGET); + + if (parent_bh) { + /* + * The block which we have just freed is + * pointed to by an indirect block: journal it + */ + BUFFER_TRACE(parent_bh, "get_write_access"); + if (!ext4_journal_get_write_access(handle, + parent_bh)){ + *p = 0; + BUFFER_TRACE(parent_bh, + "call ext4_handle_dirty_metadata"); + ext4_handle_dirty_metadata(handle, + inode, + parent_bh); + } + } + } + } else { + /* We have reached the bottom of the tree. */ + BUFFER_TRACE(parent_bh, "free data blocks"); + ext4_free_data(handle, inode, parent_bh, first, last); + } +} + +void ext4_ind_truncate(struct inode *inode) +{ + handle_t *handle; + struct ext4_inode_info *ei = EXT4_I(inode); + __le32 *i_data = ei->i_data; + int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); + struct address_space *mapping = inode->i_mapping; + ext4_lblk_t offsets[4]; + Indirect chain[4]; + Indirect *partial; + __le32 nr = 0; + int n = 0; + ext4_lblk_t last_block, max_block; + unsigned blocksize = inode->i_sb->s_blocksize; + + handle = start_transaction(inode); + if (IS_ERR(handle)) + return; /* AKPM: return what? */ + + last_block = (inode->i_size + blocksize-1) + >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); + max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) + >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); + + if (inode->i_size & (blocksize - 1)) + if (ext4_block_truncate_page(handle, mapping, inode->i_size)) + goto out_stop; + + if (last_block != max_block) { + n = ext4_block_to_path(inode, last_block, offsets, NULL); + if (n == 0) + goto out_stop; /* error */ + } + + /* + * OK. This truncate is going to happen. We add the inode to the + * orphan list, so that if this truncate spans multiple transactions, + * and we crash, we will resume the truncate when the filesystem + * recovers. It also marks the inode dirty, to catch the new size. + * + * Implication: the file must always be in a sane, consistent + * truncatable state while each transaction commits. + */ + if (ext4_orphan_add(handle, inode)) + goto out_stop; + + /* + * From here we block out all ext4_get_block() callers who want to + * modify the block allocation tree. + */ + down_write(&ei->i_data_sem); + + ext4_discard_preallocations(inode); + + /* + * The orphan list entry will now protect us from any crash which + * occurs before the truncate completes, so it is now safe to propagate + * the new, shorter inode size (held for now in i_size) into the + * on-disk inode. We do this via i_disksize, which is the value which + * ext4 *really* writes onto the disk inode. + */ + ei->i_disksize = inode->i_size; + + if (last_block == max_block) { + /* + * It is unnecessary to free any data blocks if last_block is + * equal to the indirect block limit. + */ + goto out_unlock; + } else if (n == 1) { /* direct blocks */ + ext4_free_data(handle, inode, NULL, i_data+offsets[0], + i_data + EXT4_NDIR_BLOCKS); + goto do_indirects; + } + + partial = ext4_find_shared(inode, n, offsets, chain, &nr); + /* Kill the top of shared branch (not detached) */ + if (nr) { + if (partial == chain) { + /* Shared branch grows from the inode */ + ext4_free_branches(handle, inode, NULL, + &nr, &nr+1, (chain+n-1) - partial); + *partial->p = 0; + /* + * We mark the inode dirty prior to restart, + * and prior to stop. No need for it here. + */ + } else { + /* Shared branch grows from an indirect block */ + BUFFER_TRACE(partial->bh, "get_write_access"); + ext4_free_branches(handle, inode, partial->bh, + partial->p, + partial->p+1, (chain+n-1) - partial); + } + } + /* Clear the ends of indirect blocks on the shared branch */ + while (partial > chain) { + ext4_free_branches(handle, inode, partial->bh, partial->p + 1, + (__le32*)partial->bh->b_data+addr_per_block, + (chain+n-1) - partial); + BUFFER_TRACE(partial->bh, "call brelse"); + brelse(partial->bh); + partial--; + } +do_indirects: + /* Kill the remaining (whole) subtrees */ + switch (offsets[0]) { + default: + nr = i_data[EXT4_IND_BLOCK]; + if (nr) { + ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); + i_data[EXT4_IND_BLOCK] = 0; + } + case EXT4_IND_BLOCK: + nr = i_data[EXT4_DIND_BLOCK]; + if (nr) { + ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); + i_data[EXT4_DIND_BLOCK] = 0; + } + case EXT4_DIND_BLOCK: + nr = i_data[EXT4_TIND_BLOCK]; + if (nr) { + ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); + i_data[EXT4_TIND_BLOCK] = 0; + } + case EXT4_TIND_BLOCK: + ; + } + +out_unlock: + up_write(&ei->i_data_sem); + inode->i_mtime = inode->i_ctime = ext4_current_time(inode); + ext4_mark_inode_dirty(handle, inode); + + /* + * In a multi-transaction truncate, we only make the final transaction + * synchronous + */ + if (IS_SYNC(inode)) + ext4_handle_sync(handle); +out_stop: + /* + * If this was a simple ftruncate(), and the file will remain alive + * then we need to clear up the orphan record which we created above. + * However, if this was a real unlink then we were called by + * ext4_delete_inode(), and we allow that function to clean up the + * orphan info for us. + */ + if (inode->i_nlink) + ext4_orphan_del(handle, inode); + + ext4_journal_stop(handle); + trace_ext4_truncate_exit(inode); +} + |
