diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/pata_amd.c | 76 | ||||
| -rw-r--r-- | drivers/ata/pata_it821x.c | 3 | ||||
| -rw-r--r-- | drivers/ata/pata_legacy.c | 7 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 20 |
4 files changed, 75 insertions, 31 deletions
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 63719ab9ea44..115b1cd6dcf5 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.11" +#define DRV_VERSION "0.4.1" /** * timing_setup - shared timing computation and load @@ -145,6 +145,13 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } +/** + * amd_cable_detect - report cable type + * @ap: port + * + * AMD controller/BIOS setups record the cable type in word 0x42 + */ + static int amd_cable_detect(struct ata_port *ap) { static const u32 bitmask[2] = {0x03, 0x0C}; @@ -158,6 +165,40 @@ static int amd_cable_detect(struct ata_port *ap) } /** + * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI + * @ap: ATA interface + * @adev: ATA device + * + * Set the PCI fifo for this device according to the devices present + * on the bus at this point in time. We need to turn the post write buffer + * off for ATAPI devices as we may need to issue a word sized write to the + * device as the final I/O + */ + +static void amd_fifo_setup(struct ata_port *ap) +{ + struct ata_device *adev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 fifobit[2] = { 0xC0, 0x30}; + u8 fifo = fifobit[ap->port_no]; + u8 r; + + + ata_for_each_dev(adev, &ap->link, ENABLED) { + if (adev->class == ATA_DEV_ATAPI) + fifo = 0; + } + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */ + fifo = 0; + + /* On the later chips the read prefetch bits become no-op bits */ + pci_read_config_byte(pdev, 0x41, &r); + r &= ~fifobit[ap->port_no]; + r |= fifo; + pci_write_config_byte(pdev, 0x41, r); +} + +/** * amd33_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -167,21 +208,25 @@ static int amd_cable_detect(struct ata_port *ap) static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 1); } static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 2); } static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 3); } static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 4); } @@ -397,6 +442,16 @@ static struct ata_port_operations nv133_port_ops = { .set_dmamode = nv133_set_dmamode, }; +static void amd_clear_fifo(struct pci_dev *pdev) +{ + u8 fifo; + /* Disable the FIFO, the FIFO logic will re-enable it as + appropriate */ + pci_read_config_byte(pdev, 0x41, &fifo); + fifo &= 0x0F; + pci_write_config_byte(pdev, 0x41, fifo); +} + static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { @@ -503,14 +558,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type < 3) ata_pci_bmdma_clear_simplex(pdev); - - /* Check for AMD7411 */ - if (type == 3) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - + if (pdev->vendor == PCI_VENDOR_ID_AMD) + amd_clear_fifo(pdev); /* Cable detection on Nvidia chips doesn't work too well, * cache BIOS programmed UDMA mode. */ @@ -536,18 +585,11 @@ static int amd_reinit_one(struct pci_dev *pdev) return rc; if (pdev->vendor == PCI_VENDOR_ID_AMD) { - u8 fifo; - pci_read_config_byte(pdev, 0x41, &fifo); - if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + amd_clear_fifo(pdev); if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) ata_pci_bmdma_clear_simplex(pdev); } - ata_host_resume(host); return 0; } diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f1bb2f9fecbf..b05b86a912c5 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -557,6 +557,9 @@ static unsigned int it821x_read_id(struct ata_device *adev, id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; + /* Clear the serial number because it's different each boot + which breaks validation on resume */ + memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN); } return err_mask; } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6c1d778b63a9..e3bc1b436284 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -283,9 +283,10 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { - if (ata_id_has_dword_io(dev->id)) { + int slop = buflen & 3; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; unsigned long flags; local_irq_save(flags); @@ -735,7 +736,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4ae1a4138b47..7007edd2d451 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3114,19 +3114,17 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (!IS_SOC(hpriv)) { - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_ofs); - /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); - /* - * enable only global host interrupts for now. - * The per-port interrupts get done later as ports are set up. - */ - mv_set_main_irq_mask(host, 0, PCI_ERR); - } + /* + * enable only global host interrupts for now. + * The per-port interrupts get done later as ports are set up. + */ + mv_set_main_irq_mask(host, 0, PCI_ERR); done: return rc; } |
