diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/acpi/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/acpi/Makefile | 3 | ||||
| -rw-r--r-- | drivers/acpi/acpi_processor.c | 7 | ||||
| -rw-r--r-- | drivers/acpi/bus.c | 3 | ||||
| -rw-r--r-- | drivers/acpi/gsi.c | 105 | ||||
| -rw-r--r-- | drivers/acpi/internal.h | 4 | ||||
| -rw-r--r-- | drivers/acpi/osl.c | 6 | ||||
| -rw-r--r-- | drivers/acpi/processor_core.c | 60 | ||||
| -rw-r--r-- | drivers/acpi/tables.c | 52 | ||||
| -rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 132 | ||||
| -rw-r--r-- | drivers/irqchip/irq-gic.c | 104 | ||||
| -rw-r--r-- | drivers/irqchip/irqchip.c | 3 | ||||
| -rw-r--r-- | drivers/xen/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/xen/Makefile | 2 |
14 files changed, 430 insertions, 65 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index e6c3ddd92665..ab2cbb51c6aa 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -5,7 +5,7 @@ menuconfig ACPI bool "ACPI (Advanced Configuration and Power Interface) Support" depends on !IA64_HP_SIM - depends on IA64 || X86 + depends on IA64 || X86 || (ARM64 && EXPERT) depends on PCI select PNP default y @@ -48,9 +48,16 @@ config ACPI_LEGACY_TABLES_LOOKUP config ARCH_MIGHT_HAVE_ACPI_PDC bool +config ACPI_GENERIC_GSI + bool + +config ACPI_SYSTEM_POWER_STATES_SUPPORT + bool + config ACPI_SLEEP bool depends on SUSPEND || HIBERNATION + depends on ACPI_SYSTEM_POWER_STATES_SUPPORT default y config ACPI_PROCFS_POWER @@ -163,6 +170,7 @@ config ACPI_PROCESSOR tristate "Processor" select THERMAL select CPU_IDLE + depends on X86 || IA64 default y help This driver installs ACPI as the idle handler for Linux and uses diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 623b117ad1a2..8a063e276530 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -23,7 +23,7 @@ acpi-y += nvs.o # Power management related files acpi-y += wakeup.o -acpi-y += sleep.o +acpi-$(CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT) += sleep.o acpi-y += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o @@ -56,6 +56,7 @@ ifdef CONFIG_ACPI_VIDEO acpi-y += video_detect.o endif acpi-y += acpi_lpat.o +acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o # These are (potentially) separate modules diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 1020b1b53a17..58f335ca2e75 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -170,7 +170,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) acpi_status status; int ret; - if (pr->phys_id == -1) + if (pr->phys_id == PHYS_CPUID_INVALID) return -ENODEV; status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); @@ -215,7 +215,8 @@ static int acpi_processor_get_info(struct acpi_device *device) union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; struct acpi_processor *pr = acpi_driver_data(device); - int phys_id, cpu_index, device_declaration = 0; + phys_cpuid_t phys_id; + int cpu_index, device_declaration = 0; acpi_status status = AE_OK; static int cpu0_initialized; unsigned long long value; @@ -263,7 +264,7 @@ static int acpi_processor_get_info(struct acpi_device *device) } phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id); - if (phys_id < 0) + if (phys_id == PHYS_CPUID_INVALID) acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n"); pr->phys_id = phys_id; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 8b67bd0f6bb5..c412fdb28d34 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -448,6 +448,9 @@ static int __init acpi_bus_init_irq(void) case ACPI_IRQ_MODEL_IOSAPIC: message = "IOSAPIC"; break; + case ACPI_IRQ_MODEL_GIC: + message = "GIC"; + break; case ACPI_IRQ_MODEL_PLATFORM: message = "platform specific model"; break; diff --git a/drivers/acpi/gsi.c b/drivers/acpi/gsi.c new file mode 100644 index 000000000000..38208f2d0e69 --- /dev/null +++ b/drivers/acpi/gsi.c @@ -0,0 +1,105 @@ +/* + * ACPI GSI IRQ layer + * + * Copyright (C) 2015 ARM Ltd. + * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/acpi.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> + +enum acpi_irq_model_id acpi_irq_model; + +static unsigned int acpi_gsi_get_irq_type(int trigger, int polarity) +{ + switch (polarity) { + case ACPI_ACTIVE_LOW: + return trigger == ACPI_EDGE_SENSITIVE ? + IRQ_TYPE_EDGE_FALLING : + IRQ_TYPE_LEVEL_LOW; + case ACPI_ACTIVE_HIGH: + return trigger == ACPI_EDGE_SENSITIVE ? + IRQ_TYPE_EDGE_RISING : + IRQ_TYPE_LEVEL_HIGH; + case ACPI_ACTIVE_BOTH: + if (trigger == ACPI_EDGE_SENSITIVE) + return IRQ_TYPE_EDGE_BOTH; + default: + return IRQ_TYPE_NONE; + } +} + +/** + * acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI + * @gsi: GSI IRQ number to map + * @irq: pointer where linux IRQ number is stored + * + * irq location updated with irq value [>0 on success, 0 on failure] + * + * Returns: linux IRQ number on success (>0) + * -EINVAL on failure + */ +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + /* + * Only default domain is supported at present, always find + * the mapping corresponding to default domain by passing NULL + * as irq_domain parameter + */ + *irq = irq_find_mapping(NULL, gsi); + /* + * *irq == 0 means no mapping, that should + * be reported as a failure + */ + return (*irq > 0) ? *irq : -EINVAL; +} +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); + +/** + * acpi_register_gsi() - Map a GSI to a linux IRQ number + * @dev: device for which IRQ has to be mapped + * @gsi: GSI IRQ number + * @trigger: trigger type of the GSI number to be mapped + * @polarity: polarity of the GSI to be mapped + * + * Returns: a valid linux IRQ number on success + * -EINVAL on failure + */ +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) +{ + unsigned int irq; + unsigned int irq_type = acpi_gsi_get_irq_type(trigger, polarity); + + /* + * There is no way at present to look-up the IRQ domain on ACPI, + * hence always create mapping referring to the default domain + * by passing NULL as irq_domain parameter + */ + irq = irq_create_mapping(NULL, gsi); + if (!irq) + return -EINVAL; + + /* Set irq type if specified and different than the current one */ + if (irq_type != IRQ_TYPE_NONE && + irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +/** + * acpi_unregister_gsi() - Free a GSI<->linux IRQ number mapping + * @gsi: GSI IRQ number + */ +void acpi_unregister_gsi(u32 gsi) +{ + int irq = irq_find_mapping(NULL, gsi); + + irq_dispose_mapping(irq); +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 56b321aa2b1c..ba4a61e964be 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -161,7 +161,11 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit); /*-------------------------------------------------------------------------- Suspend/Resume -------------------------------------------------------------------------- */ +#ifdef CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT extern int acpi_sleep_init(void); +#else +static inline int acpi_sleep_init(void) { return -ENXIO; } +#endif #ifdef CONFIG_ACPI_SLEEP int acpi_sleep_proc_init(void); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index f9eeae871593..39748bb3a543 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -336,11 +336,11 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size) return NULL; } -#ifndef CONFIG_IA64 -#define should_use_kmap(pfn) page_is_ram(pfn) -#else +#if defined(CONFIG_IA64) || defined(CONFIG_ARM64) /* ioremap will take care of cache attributes */ #define should_use_kmap(pfn) 0 +#else +#define should_use_kmap(pfn) page_is_ram(pfn) #endif static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 7962651cdbd4..b1ec78b8a645 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -32,7 +32,7 @@ static struct acpi_table_madt *get_madt_table(void) } static int map_lapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + u32 acpi_id, phys_cpuid_t *apic_id) { struct acpi_madt_local_apic *lapic = container_of(entry, struct acpi_madt_local_apic, header); @@ -48,7 +48,7 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_x2apic_id(struct acpi_subtable_header *entry, - int device_declaration, u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id) { struct acpi_madt_local_x2apic *apic = container_of(entry, struct acpi_madt_local_x2apic, header); @@ -65,7 +65,7 @@ static int map_x2apic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - int device_declaration, u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id) { struct acpi_madt_local_sapic *lsapic = container_of(entry, struct acpi_madt_local_sapic, header); @@ -83,10 +83,35 @@ static int map_lsapic_id(struct acpi_subtable_header *entry, return 0; } -static int map_madt_entry(int type, u32 acpi_id) +/* + * Retrieve the ARM CPU physical identifier (MPIDR) + */ +static int map_gicc_mpidr(struct acpi_subtable_header *entry, + int device_declaration, u32 acpi_id, phys_cpuid_t *mpidr) +{ + struct acpi_madt_generic_interrupt *gicc = + container_of(entry, struct acpi_madt_generic_interrupt, header); + + if (!(gicc->flags & ACPI_MADT_ENABLED)) + return -ENODEV; + + /* device_declaration means Device object in DSDT, in the + * GIC interrupt model, logical processors are required to + * have a Processor Device object in the DSDT, so we should + * check device_declaration here + */ + if (device_declaration && (gicc->uid == acpi_id)) { + *mpidr = gicc->arm_mpidr; + return 0; + } + + return -EINVAL; +} + +static phys_cpuid_t map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; - int phys_id = -1; /* CPU hardware ID */ + phys_cpuid_t phys_id = PHYS_CPUID_INVALID; /* CPU hardware ID */ struct acpi_table_madt *madt; madt = get_madt_table(); @@ -111,18 +136,21 @@ static int map_madt_entry(int type, u32 acpi_id) } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { if (!map_lsapic_id(header, type, acpi_id, &phys_id)) break; + } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) { + if (!map_gicc_mpidr(header, type, acpi_id, &phys_id)) + break; } entry += header->length; } return phys_id; } -static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) +static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_subtable_header *header; - int phys_id = -1; + phys_cpuid_t phys_id = PHYS_CPUID_INVALID; if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) goto exit; @@ -143,33 +171,35 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) map_lsapic_id(header, type, acpi_id, &phys_id); else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) map_x2apic_id(header, type, acpi_id, &phys_id); + else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) + map_gicc_mpidr(header, type, acpi_id, &phys_id); exit: kfree(buffer.pointer); return phys_id; } -int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) +phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) { - int phys_id; + phys_cpuid_t phys_id; phys_id = map_mat_entry(handle, type, acpi_id); - if (phys_id == -1) + if (phys_id == PHYS_CPUID_INVALID) phys_id = map_madt_entry(type, acpi_id); return phys_id; } -int acpi_map_cpuid(int phys_id, u32 acpi_id) +int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id) { #ifdef CONFIG_SMP int i; #endif - if (phys_id == -1) { + if (phys_id == PHYS_CPUID_INVALID) { /* * On UP processor, there is no _MAT or MADT table. - * So above phys_id is always set to -1. + * So above phys_id is always set to PHYS_CPUID_INVALID. * * BIOS may define multiple CPU handles even for UP processor. * For example, @@ -190,7 +220,7 @@ int acpi_map_cpuid(int phys_id, u32 acpi_id) if (nr_cpu_ids <= 1 && acpi_id == 0) return acpi_id; else - return phys_id; + return -1; } #ifdef CONFIG_SMP @@ -208,7 +238,7 @@ int acpi_map_cpuid(int phys_id, u32 acpi_id) int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) { - int phys_id; + phys_cpuid_t phys_id; phys_id = acpi_get_phys_id(handle, type, acpi_id); diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 93b81523a2fe..2e19189da0ee 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -23,6 +23,8 @@ * */ +/* Uncomment next line to get verbose printout */ +/* #define DEBUG */ #define pr_fmt(fmt) "ACPI: " fmt #include <linux/init.h> @@ -61,9 +63,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_local_apic *p = (struct acpi_madt_local_apic *)header; - pr_info("LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n", - p->processor_id, p->id, - (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + pr_debug("LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n", + p->processor_id, p->id, + (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); } break; @@ -71,9 +73,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_local_x2apic *p = (struct acpi_madt_local_x2apic *)header; - pr_info("X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\n", - p->local_apic_id, p->uid, - (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + pr_debug("X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\n", + p->local_apic_id, p->uid, + (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); } break; @@ -81,8 +83,8 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_io_apic *p = (struct acpi_madt_io_apic *)header; - pr_info("IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n", - p->id, p->address, p->global_irq_base); + pr_debug("IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n", + p->id, p->address, p->global_irq_base); } break; @@ -155,9 +157,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_io_sapic *p = (struct acpi_madt_io_sapic *)header; - pr_info("IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n", - p->id, (void *)(unsigned long)p->address, - p->global_irq_base); + pr_debug("IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n", + p->id, (void *)(unsigned long)p->address, + p->global_irq_base); } break; @@ -165,9 +167,9 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) { struct acpi_madt_local_sapic *p = (struct acpi_madt_local_sapic *)header; - pr_info("LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n", - p->processor_id, p->id, p->eid, - (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + pr_debug("LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n", + p->processor_id, p->id, p->eid, + (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); } break; @@ -183,6 +185,28 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) } break; + case ACPI_MADT_TYPE_GENERIC_INTERRUPT: + { + struct acpi_madt_generic_interrupt *p = + (struct acpi_madt_generic_interrupt *)header; + pr_debug("GICC (acpi_id[0x%04x] address[%llx] MPIDR[0x%llx] %s)\n", + p->uid, p->base_address, + p->arm_mpidr, + (p->flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); + + } + break; + + case ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR: + { + struct acpi_madt_generic_distributor *p = + (struct acpi_madt_generic_distributor *)header; + pr_debug("GIC Distributor (gic_id[0x%04x] address[%llx] gsi_base[%d])\n", + p->gic_id, p->base_address, + p->global_irq_base); + } + break; + default: pr_warn("Found unsupported MADT entry (type = 0x%x)\n", header->type); diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 266469691e58..0aa135ddbf80 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/sched_clock.h> +#include <linux/acpi.h> #include <asm/arch_timer.h> #include <asm/virt.h> @@ -371,8 +372,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np) if (arch_timer_rate) return; - /* Try to determine the frequency from the device tree or CNTFRQ */ - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { + /* + * Try to determine the frequency from the device tree or CNTFRQ, + * if ACPI is enabled, get the frequency from CNTFRQ ONLY. + */ + if (!acpi_disabled || + of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { if (cntbase) arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); else @@ -691,28 +696,8 @@ static void __init arch_timer_common_init(void) arch_timer_arch_init(); } -static void __init arch_timer_init(struct device_node *np) +static void __init arch_timer_init(void) { - int i; - - if (arch_timers_present & ARCH_CP15_TIMER) { - pr_warn("arch_timer: multiple nodes in dt, skipping\n"); - return; - } - - arch_timers_present |= ARCH_CP15_TIMER; - for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) - arch_timer_ppi[i] = irq_of_parse_and_map(np, i); - arch_timer_detect_rate(NULL, np); - - /* - * If we cannot rely on firmware initializing the timer registers then - * we should use the physical timers instead. - */ - if (IS_ENABLED(CONFIG_ARM) && - of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) - arch_timer_use_virtual = false; - /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so @@ -731,13 +716,39 @@ static void __init arch_timer_init(struct device_node *np) } } - arch_timer_c3stop = !of_property_read_bool(np, "always-on"); - arch_timer_register(); arch_timer_common_init(); } -CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init); -CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init); + +static void __init arch_timer_of_init(struct device_node *np) +{ + int i; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: multiple nodes in dt, skipping\n"); + return; + } + + arch_timers_present |= ARCH_CP15_TIMER; + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + arch_timer_detect_rate(NULL, np); + + arch_timer_c3stop = !of_property_read_bool(np, "always-on"); + + /* + * If we cannot rely on firmware initializing the timer registers then + * we should use the physical timers instead. + */ + if (IS_ENABLED(CONFIG_ARM) && + of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + arch_timer_use_virtual = false; + + arch_timer_init(); +} +CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init); +CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init); static void __init arch_timer_mem_init(struct device_node *np) { @@ -804,3 +815,70 @@ static void __init arch_timer_mem_init(struct device_node *np) } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); + +#ifdef CONFIG_ACPI +static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags) +{ + int trigger, polarity; + + if (!interrupt) + return 0; + + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + + return acpi_register_gsi(NULL, interrupt, trigger, polarity); +} + +/* Initialize per-processor generic timer */ +static int __init arch_timer_acpi_init(struct acpi_table_header *table) +{ + struct acpi_table_gtdt *gtdt; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: already initialized, skipping\n"); + return -EINVAL; + } + + gtdt = container_of(table, struct acpi_table_gtdt, header); + + arch_timers_present |= ARCH_CP15_TIMER; + + arch_timer_ppi[PHYS_SECURE_PPI] = + map_generic_timer_interrupt(gtdt->secure_el1_interrupt, + gtdt->secure_el1_flags); + + arch_timer_ppi[PHYS_NONSECURE_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt, + gtdt->non_secure_el1_flags); + + arch_timer_ppi[VIRT_PPI] = + map_generic_timer_interrupt(gtdt->virtual_timer_interrupt, + gtdt->virtual_timer_flags); + + arch_timer_ppi[HYP_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt, + gtdt->non_secure_el2_flags); + + /* Get the frequency from CNTFRQ */ + arch_timer_detect_rate(NULL, NULL); + + /* Always-on capability */ + arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); + + arch_timer_init(); + return 0; +} + +/* Initialize all the generic timers presented in GTDT */ +void __init acpi_generic_timer_init(void) +{ + if (acpi_disabled) + return; + + acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init); +} +#endif diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index a6ce3476834e..7b315e385ba3 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -33,12 +33,14 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/acpi.h> #include <linux/irqdomain.h> #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/slab.h> #include <linux/irqchip/chained_irq.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/arm-gic-acpi.h> #include <asm/cputype.h> #include <asm/irq.h> @@ -1107,3 +1109,105 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); #endif + +#ifdef CONFIG_ACPI +static phys_addr_t dist_phy_base, cpu_phy_base __initdata; + +static int __init +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_interrupt *processor; + phys_addr_t gic_cpu_base; + static int cpu_base_assigned; + + processor = (struct acpi_madt_generic_interrupt *)header; + + if (BAD_MADT_ENTRY(processor, end)) + return -EINVAL; + + /* + * There is no support for non-banked GICv1/2 register in ACPI spec. + * All CPU interface addresses have to be the same. + */ + gic_cpu_base = processor->base_address; + if (cpu_base_assigned && gic_cpu_base != cpu_phy_base) + return -EINVAL; + + cpu_phy_base = gic_cpu_base; + cpu_base_assigned = 1; + return 0; +} + +static int __init +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_distributor *dist; + + dist = (struct acpi_madt_generic_distributor *)header; + + if (BAD_MADT_ENTRY(dist, end)) + return -EINVAL; + + dist_phy_base = dist->base_address; + return 0; +} + +int __init +gic_v2_acpi_init(struct acpi_table_header *table) +{ + void __iomem *cpu_base, *dist_base; + int count; + + /* Collect CPU base addresses */ + count = acpi_parse_entries(ACPI_SIG_MADT, + sizeof(struct acpi_table_madt), + gic_acpi_parse_madt_cpu, table, + ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0); + if (count <= 0) { + pr_err("No valid GICC entries exist\n"); + return -EINVAL; + } + + /* + * Find distributor base address. We expect one distributor entry since + * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade. + */ + count = acpi_parse_entries(ACPI_SIG_MADT, + sizeof(struct acpi_table_madt), + gic_acpi_parse_madt_distributor, table, + ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0); + if (count <= 0) { + pr_err("No valid GICD entries exist\n"); + return -EINVAL; + } else if (count > 1) { + pr_err("More than one GICD entry detected\n"); + return -EINVAL; + } + + cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE); + if (!cpu_base) { + pr_err("Unable to map GICC registers\n"); + return -ENOMEM; + } + + dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE); + if (!dist_base) { + pr_err("Unable to map GICD registers\n"); + iounmap(cpu_base); + return -ENOMEM; + } + + /* + * Initialize zero GIC instance (no multi-GIC support). Also, set GIC + * as default IRQ domain to allow for GSI registration and GSI to IRQ + * number translation (see acpi_register_gsi() and acpi_gsi_to_irq()). + */ + gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL); + irq_set_default_host(gic_data[0].domain); + + acpi_irq_model = ACPI_IRQ_MODEL_GIC; + return 0; +} +#endif diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c index 0fe2f718d81c..afd1af3dfe5a 100644 --- a/drivers/irqchip/irqchip.c +++ b/drivers/irqchip/irqchip.c @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ +#include <linux/acpi_irq.h> #include <linux/init.h> #include <linux/of_irq.h> #include <linux/irqchip.h> @@ -26,4 +27,6 @@ extern struct of_device_id __irqchip_of_table[]; void __init irqchip_init(void) { of_irq_init(__irqchip_of_table); + + acpi_irq_init(); } diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index a270004c9605..7cd226da15fe 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -276,4 +276,8 @@ config XEN_AUTO_XLATE help Support for auto-translated physmap guests. +config XEN_ACPI + def_bool y + depends on X86 && ACPI + endmenu diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 40edd1cbb60d..e293bc507cbc 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -13,7 +13,7 @@ CFLAGS_efi.o += -fshort-wchar dom0-$(CONFIG_PCI) += pci.o dom0-$(CONFIG_USB_SUPPORT) += dbgp.o -dom0-$(CONFIG_ACPI) += acpi.o $(xen-pad-y) +dom0-$(CONFIG_XEN_ACPI) += acpi.o $(xen-pad-y) xen-pad-$(CONFIG_X86) += xen-acpi-pad.o dom0-$(CONFIG_X86) += pcpu.o obj-$(CONFIG_XEN_DOM0) += $(dom0-y) |
