diff options
Diffstat (limited to 'drivers/usb')
278 files changed, 11214 insertions, 6594 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index a7773a3e02b1..4c90b510d016 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -13,7 +13,6 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 && I2C default y if MFD_TC6393XB default y if ARCH_W90X900 default y if ARCH_DAVINCI_DA8XX @@ -48,6 +47,7 @@ config USB_ARCH_HAS_EHCI default y if SPARC_LEON default y if ARCH_MMP default y if MACH_LOONGSON1 + default y if PLAT_ORION default PCI # some non-PCI HCDs implement xHCI diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 9d1a044504e8..defff43950bc 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -307,6 +307,34 @@ enum { #define FW_GET_BYTE(p) (*((__u8 *) (p))) #define FW_DIR "ueagle-atm/" +#define EAGLE_FIRMWARE FW_DIR "eagle.fw" +#define ADI930_FIRMWARE FW_DIR "adi930.fw" +#define EAGLE_I_FIRMWARE FW_DIR "eagleI.fw" +#define EAGLE_II_FIRMWARE FW_DIR "eagleII.fw" +#define EAGLE_III_FIRMWARE FW_DIR "eagleIII.fw" +#define EAGLE_IV_FIRMWARE FW_DIR "eagleIV.fw" + +#define DSP4I_FIRMWARE FW_DIR "DSP4i.bin" +#define DSP4P_FIRMWARE FW_DIR "DSP4p.bin" +#define DSP9I_FIRMWARE FW_DIR "DSP9i.bin" +#define DSP9P_FIRMWARE FW_DIR "DSP9p.bin" +#define DSPEI_FIRMWARE FW_DIR "DSPei.bin" +#define DSPEP_FIRMWARE FW_DIR "DSPep.bin" +#define FPGA930_FIRMWARE FW_DIR "930-fpga.bin" + +#define CMV4P_FIRMWARE FW_DIR "CMV4p.bin" +#define CMV4PV2_FIRMWARE FW_DIR "CMV4p.bin.v2" +#define CMV4I_FIRMWARE FW_DIR "CMV4i.bin" +#define CMV4IV2_FIRMWARE FW_DIR "CMV4i.bin.v2" +#define CMV9P_FIRMWARE FW_DIR "CMV9p.bin" +#define CMV9PV2_FIRMWARE FW_DIR "CMV9p.bin.v2" +#define CMV9I_FIRMWARE FW_DIR "CMV9i.bin" +#define CMV9IV2_FIRMWARE FW_DIR "CMV9i.bin.v2" +#define CMVEP_FIRMWARE FW_DIR "CMVep.bin" +#define CMVEPV2_FIRMWARE FW_DIR "CMVep.bin.v2" +#define CMVEI_FIRMWARE FW_DIR "CMVei.bin" +#define CMVEIV2_FIRMWARE FW_DIR "CMVei.bin.v2" + #define UEA_FW_NAME_MAX 30 #define NB_MODEM 4 @@ -694,26 +722,26 @@ err: static int uea_load_firmware(struct usb_device *usb, unsigned int ver) { int ret; - char *fw_name = FW_DIR "eagle.fw"; + char *fw_name = EAGLE_FIRMWARE; uea_enters(usb); uea_info(usb, "pre-firmware device, uploading firmware\n"); switch (ver) { case ADI930: - fw_name = FW_DIR "adi930.fw"; + fw_name = ADI930_FIRMWARE; break; case EAGLE_I: - fw_name = FW_DIR "eagleI.fw"; + fw_name = EAGLE_I_FIRMWARE; break; case EAGLE_II: - fw_name = FW_DIR "eagleII.fw"; + fw_name = EAGLE_II_FIRMWARE; break; case EAGLE_III: - fw_name = FW_DIR "eagleIII.fw"; + fw_name = EAGLE_III_FIRMWARE; break; case EAGLE_IV: - fw_name = FW_DIR "eagleIV.fw"; + fw_name = EAGLE_IV_FIRMWARE; break; } @@ -869,19 +897,19 @@ static int request_dsp(struct uea_softc *sc) if (UEA_CHIP_VERSION(sc) == EAGLE_IV) { if (IS_ISDN(sc)) - dsp_name = FW_DIR "DSP4i.bin"; + dsp_name = DSP4I_FIRMWARE; else - dsp_name = FW_DIR "DSP4p.bin"; + dsp_name = DSP4P_FIRMWARE; } else if (UEA_CHIP_VERSION(sc) == ADI930) { if (IS_ISDN(sc)) - dsp_name = FW_DIR "DSP9i.bin"; + dsp_name = DSP9I_FIRMWARE; else - dsp_name = FW_DIR "DSP9p.bin"; + dsp_name = DSP9P_FIRMWARE; } else { if (IS_ISDN(sc)) - dsp_name = FW_DIR "DSPei.bin"; + dsp_name = DSPEI_FIRMWARE; else - dsp_name = FW_DIR "DSPep.bin"; + dsp_name = DSPEP_FIRMWARE; } ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev); @@ -1925,7 +1953,7 @@ static int load_XILINX_firmware(struct uea_softc *sc) int ret, size, u, ln; const u8 *pfw; u8 value; - char *fw_name = FW_DIR "930-fpga.bin"; + char *fw_name = FPGA930_FIRMWARE; uea_enters(INS_TO_USBDEV(sc)); @@ -2753,3 +2781,28 @@ module_usb_driver(uea_driver); MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka"); MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver"); MODULE_LICENSE("Dual BSD/GPL"); +MODULE_FIRMWARE(EAGLE_FIRMWARE); +MODULE_FIRMWARE(ADI930_FIRMWARE); +MODULE_FIRMWARE(EAGLE_I_FIRMWARE); +MODULE_FIRMWARE(EAGLE_II_FIRMWARE); +MODULE_FIRMWARE(EAGLE_III_FIRMWARE); +MODULE_FIRMWARE(EAGLE_IV_FIRMWARE); +MODULE_FIRMWARE(DSP4I_FIRMWARE); +MODULE_FIRMWARE(DSP4P_FIRMWARE); +MODULE_FIRMWARE(DSP9I_FIRMWARE); +MODULE_FIRMWARE(DSP9P_FIRMWARE); +MODULE_FIRMWARE(DSPEI_FIRMWARE); +MODULE_FIRMWARE(DSPEP_FIRMWARE); +MODULE_FIRMWARE(FPGA930_FIRMWARE); +MODULE_FIRMWARE(CMV4P_FIRMWARE); +MODULE_FIRMWARE(CMV4PV2_FIRMWARE); +MODULE_FIRMWARE(CMV4I_FIRMWARE); +MODULE_FIRMWARE(CMV4IV2_FIRMWARE); +MODULE_FIRMWARE(CMV9P_FIRMWARE); +MODULE_FIRMWARE(CMV9PV2_FIRMWARE); +MODULE_FIRMWARE(CMV9I_FIRMWARE); +MODULE_FIRMWARE(CMV9IV2_FIRMWARE); +MODULE_FIRMWARE(CMVEP_FIRMWARE); +MODULE_FIRMWARE(CMVEPV2_FIRMWARE); +MODULE_FIRMWARE(CMVEI_FIRMWARE); +MODULE_FIRMWARE(CMVEIV2_FIRMWARE); diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index ee62b3576f94..35f10bfe15db 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -84,7 +84,7 @@ #include <linux/ratelimit.h> #ifdef VERBOSE_DEBUG -static int usbatm_print_packet(const unsigned char *data, int len); +static int usbatm_print_packet(struct usbatm_data *instance, const unsigned char *data, int len); #define PACKETDEBUG(arg...) usbatm_print_packet(arg) #define vdbg(arg...) dev_dbg(arg) #else @@ -230,8 +230,8 @@ static int usbatm_submit_urb(struct urb *urb) struct usbatm_channel *channel = urb->context; int ret; - vdbg("%s: submitting urb 0x%p, size %u", - __func__, urb, urb->transfer_buffer_length); + /* vdbg("%s: submitting urb 0x%p, size %u", + __func__, urb, urb->transfer_buffer_length); */ ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret) { @@ -261,8 +261,8 @@ static void usbatm_complete(struct urb *urb) unsigned long flags; int status = urb->status; - vdbg("%s: urb 0x%p, status %d, actual_length %d", - __func__, urb, status, urb->actual_length); + /* vdbg("%s: urb 0x%p, status %d, actual_length %d", + __func__, urb, status, urb->actual_length); */ /* usually in_interrupt(), but not always */ spin_lock_irqsave(&channel->lock, flags); @@ -311,7 +311,7 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char int vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4); u8 pti = ((source[3] & 0xe) >> 1); - vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti); + vdbg(&instance->usb_intf->dev, "%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti); if ((vci != instance->cached_vci) || (vpi != instance->cached_vpi)) { instance->cached_vpi = vpi; @@ -381,7 +381,9 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char goto out; } - vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc); + vdbg(&instance->usb_intf->dev, + "%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", + __func__, length, pdu_length, vcc); if (!(skb = dev_alloc_skb(length))) { if (printk_ratelimit()) @@ -391,7 +393,9 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char goto out; } - vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize); + vdbg(&instance->usb_intf->dev, + "%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", + __func__, skb, skb->truesize); if (!atm_charge(vcc, skb->truesize)) { atm_rldbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n", @@ -405,10 +409,11 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char length); __skb_put(skb, length); - vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u", + vdbg(&instance->usb_intf->dev, + "%s: sending skb 0x%p, skb->len %u, skb->truesize %u", __func__, skb, skb->len, skb->truesize); - PACKETDEBUG(skb->data, skb->len); + PACKETDEBUG(instance, skb->data, skb->len); vcc->push(vcc, skb); @@ -474,7 +479,8 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, unsigned int bytes_written; unsigned int stride = instance->tx_channel.stride; - vdbg("%s: skb->len=%d, avail_space=%u", __func__, skb->len, avail_space); + vdbg(&instance->usb_intf->dev, "%s: skb->len=%d, avail_space=%u", + __func__, skb->len, avail_space); UDSL_ASSERT(instance, !(avail_space % stride)); for (bytes_written = 0; bytes_written < avail_space && ctrl->len; @@ -534,7 +540,8 @@ static void usbatm_rx_process(unsigned long data) struct urb *urb; while ((urb = usbatm_pop_urb(&instance->rx_channel))) { - vdbg("%s: processing urb 0x%p", __func__, urb); + vdbg(&instance->usb_intf->dev, + "%s: processing urb 0x%p", __func__, urb); if (usb_pipeisoc(urb->pipe)) { unsigned char *merge_start = NULL; @@ -608,7 +615,8 @@ static void usbatm_tx_process(unsigned long data) buffer + bytes_written, buf_size - bytes_written); - vdbg("%s: wrote %u bytes from skb 0x%p to urb 0x%p", + vdbg(&instance->usb_intf->dev, + "%s: wrote %u bytes from skb 0x%p to urb 0x%p", __func__, bytes_written, skb, urb); if (!UDSL_SKB(skb)->len) { @@ -664,7 +672,8 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb) struct usbatm_control *ctrl = UDSL_SKB(skb); int err; - vdbg("%s called (skb 0x%p, len %u)", __func__, skb, skb->len); + vdbg(&instance->usb_intf->dev, "%s called (skb 0x%p, len %u)", __func__, + skb, skb->len); /* racy disconnection check - fine */ if (!instance || instance->disconnected) { @@ -688,7 +697,7 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb) goto fail; } - PACKETDEBUG(skb->data, skb->len); + PACKETDEBUG(instance, skb->data, skb->len); /* initialize the control block */ ctrl->atm.vcc = vcc; @@ -1202,7 +1211,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, if (i >= num_rcv_urbs) list_add_tail(&urb->urb_list, &channel->list); - vdbg("%s: alloced buffer 0x%p buf size %u urb 0x%p", + vdbg(&intf->dev, "%s: alloced buffer 0x%p buf size %u urb 0x%p", __func__, urb->transfer_buffer, urb->transfer_buffer_length, urb); } @@ -1359,7 +1368,8 @@ MODULE_VERSION(DRIVER_VERSION); ************/ #ifdef VERBOSE_DEBUG -static int usbatm_print_packet(const unsigned char *data, int len) +static int usbatm_print_packet(struct usbatm_data *instance, + const unsigned char *data, int len) { unsigned char buffer[256]; int i = 0, j = 0; @@ -1369,7 +1379,7 @@ static int usbatm_print_packet(const unsigned char *data, int len) sprintf(buffer, "%.3d :", i); for (j = 0; (j < 16) && (i < len); j++, i++) sprintf(buffer, "%s %2.2x", buffer, data[i]); - dbg("%s", buffer); + dev_dbg(&instance->usb_intf->dev, "%s", buffer); } return i; } diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 8337fb5d988d..1ea932a13685 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,9 +1,9 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" - depends on USB + depends on USB || USB_GADGET help - Say Y here if your system has a dual role high speed USB - controller based on ChipIdea silicon IP. Currently, only the + Say Y here if your system has a dual role high speed USB + controller based on ChipIdea silicon IP. Currently, only the peripheral mode is supported. When compiled dynamically, the module will be called ci-hdrc.ko. @@ -12,14 +12,14 @@ if USB_CHIPIDEA config USB_CHIPIDEA_UDC bool "ChipIdea device controller" - depends on USB_GADGET - select USB_GADGET_DUALSPEED + depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA help Say Y here to enable device controller functionality of the ChipIdea driver. config USB_CHIPIDEA_HOST bool "ChipIdea host controller" + depends on USB=y || USB=USB_CHIPIDEA select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 5c66d9c330ca..d92ca325b104 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -1,3 +1,5 @@ +ccflags-$(CONFIG_USB_CHIPIDEA_DEBUG) := -DDEBUG + obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o ci_hdrc-y := core.o @@ -15,5 +17,5 @@ ifneq ($(CONFIG_PCI),) endif ifneq ($(CONFIG_OF_DEVICE),) - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx6q.o endif diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index d738603a2757..e25d1263da13 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -139,6 +139,7 @@ struct ci13xxx { enum ci_role role; bool is_otg; struct work_struct work; + struct work_struct vbus_work; struct workqueue_struct *wq; struct dma_pool *qh_pool; diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index ef60d06835d0..0f5ca4bea17f 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -20,8 +20,10 @@ #include <linux/usb/chipidea.h> #include <linux/clk.h> #include <linux/regulator/consumer.h> +#include <linux/pinctrl/consumer.h> #include "ci.h" +#include "ci13xxx_imx.h" #define pdev_to_phy(pdev) \ ((struct usb_phy *)platform_get_drvdata(pdev)) @@ -34,6 +36,55 @@ struct ci13xxx_imx_data { struct regulator *reg_vbus; }; +static const struct usbmisc_ops *usbmisc_ops; + +/* Common functions shared by usbmisc drivers */ + +int usbmisc_set_ops(const struct usbmisc_ops *ops) +{ + if (usbmisc_ops) + return -EBUSY; + + usbmisc_ops = ops; + + return 0; +} +EXPORT_SYMBOL_GPL(usbmisc_set_ops); + +void usbmisc_unset_ops(const struct usbmisc_ops *ops) +{ + usbmisc_ops = NULL; +} +EXPORT_SYMBOL_GPL(usbmisc_unset_ops); + +int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev) +{ + struct device_node *np = dev->of_node; + struct of_phandle_args args; + int ret; + + usbdev->dev = dev; + + ret = of_parse_phandle_with_args(np, "fsl,usbmisc", "#index-cells", + 0, &args); + if (ret) { + dev_err(dev, "Failed to parse property fsl,usbmisc, errno %d\n", + ret); + memset(usbdev, 0, sizeof(*usbdev)); + return ret; + } + usbdev->index = args.args[0]; + of_node_put(args.np); + + if (of_find_property(np, "disable-over-current", NULL)) + usbdev->disable_oc = 1; + + return 0; +} +EXPORT_SYMBOL_GPL(usbmisc_get_init_data); + +/* End of common functions shared by usbmisc drivers*/ + static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { .name = "ci13xxx_imx", .flags = CI13XXX_REQUIRE_TRANSCEIVER | @@ -49,8 +100,13 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) struct device_node *phy_np; struct resource *res; struct regulator *reg_vbus; + struct pinctrl *pinctrl; int ret; + if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL) + && !usbmisc_ops) + return -EPROBE_DEFER; + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) { dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n"); @@ -63,6 +119,11 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) return -ENOENT; } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, "pinctrl get/select failed, err=%ld\n", + PTR_ERR(pinctrl)); + data->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(data->clk)) { dev_err(&pdev->dev, @@ -120,6 +181,16 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) *pdev->dev.dma_mask = DMA_BIT_MASK(32); dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); } + + if (usbmisc_ops && usbmisc_ops->init) { + ret = usbmisc_ops->init(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, + "usbmisc init failed, ret=%d\n", ret); + goto err; + } + } + plat_ci = ci13xxx_add_device(&pdev->dev, pdev->resource, pdev->num_resources, &ci13xxx_imx_platdata); diff --git a/drivers/usb/chipidea/ci13xxx_imx.h b/drivers/usb/chipidea/ci13xxx_imx.h new file mode 100644 index 000000000000..2e88accb3d67 --- /dev/null +++ b/drivers/usb/chipidea/ci13xxx_imx.h @@ -0,0 +1,28 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* Used to set SoC specific callbacks */ +struct usbmisc_ops { + /* It's called once when probe a usb device */ + int (*init)(struct device *dev); +}; + +struct usbmisc_usb_device { + struct device *dev; /* usb controller device */ + int index; + + int disable_oc:1; /* over current detect disabled */ +}; + +int usbmisc_set_ops(const struct usbmisc_ops *ops); +void usbmisc_unset_ops(const struct usbmisc_ops *ops); +int +usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 1083585fad00..f69d029b4607 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -273,14 +273,13 @@ static void ci_role_work(struct work_struct *work) struct ci13xxx *ci = container_of(work, struct ci13xxx, work); enum ci_role role = ci_otg_role(ci); - hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS); - if (role != ci->role) { dev_dbg(ci->dev, "switching from %s to %s\n", ci_role(ci)->name, ci->roles[role]->name); ci_role_stop(ci); ci_role_start(ci, role); + enable_irq(ci->irq); } } @@ -320,17 +319,22 @@ static irqreturn_t ci_irq(int irq, void *data) { struct ci13xxx *ci = data; irqreturn_t ret = IRQ_NONE; + u32 otgsc = 0; + + if (ci->is_otg) + otgsc = hw_read(ci, OP_OTGSC, ~0); - if (ci->is_otg) { - u32 sts = hw_read(ci, OP_OTGSC, ~0); + if (ci->role != CI_ROLE_END) + ret = ci_role(ci)->irq(ci); - if (sts & OTGSC_IDIS) { - queue_work(ci->wq, &ci->work); - ret = IRQ_HANDLED; - } + if (ci->is_otg && (otgsc & OTGSC_IDIS)) { + hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS); + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + ret = IRQ_HANDLED; } - return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci); + return ret; } static DEFINE_IDA(ci_ida); @@ -462,6 +466,8 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev) if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { ci->is_otg = true; + /* ID pin needs 1ms debouce time, we delay 2ms for safe */ + mdelay(2); ci->role = ci_otg_role(ci); } else { ci->role = ci->roles[CI_ROLE_HOST] diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index c7a032a4f0c5..2f45bba8561d 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -78,8 +78,7 @@ static inline int ep_to_bit(struct ci13xxx *ci, int n) } /** - * hw_device_state: enables/disables interrupts & starts/stops device (execute - * without interruption) + * hw_device_state: enables/disables interrupts (execute without interruption) * @dma: 0 => disable, !0 => enable and set dma engine * * This function returns an error code @@ -91,9 +90,7 @@ static int hw_device_state(struct ci13xxx *ci, u32 dma) /* interrupt, error, port change, reset, sleep/suspend */ hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(ci, OP_USBCMD, USBCMD_RS, 0); hw_write(ci, OP_USBINTR, ~0, 0); } return 0; @@ -308,6 +305,18 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci) return reg; } +static void hw_enable_vbus_intr(struct ci13xxx *ci) +{ + hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS); + hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE); + queue_work(ci->wq, &ci->vbus_work); +} + +static void hw_disable_vbus_intr(struct ci13xxx *ci) +{ + hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0); +} + /** * hw_test_and_clear_setup_guard: test & clear setup guard (execute without * interruption) @@ -374,6 +383,16 @@ static int hw_usb_reset(struct ci13xxx *ci) return 0; } +static void vbus_work(struct work_struct *work) +{ + struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work); + + if (hw_read(ci, OP_OTGSC, OTGSC_AVV)) + usb_gadget_vbus_connect(&ci->gadget); + else + usb_gadget_vbus_disconnect(&ci->gadget); +} + /****************************************************************************** * UTIL block *****************************************************************************/ @@ -774,10 +793,7 @@ __acquires(mEp->lock) { struct ci13xxx_req *mReq, *mReqTemp; struct ci13xxx_ep *mEpTemp = mEp; - int uninitialized_var(retval); - - if (list_empty(&mEp->qh.queue)) - return -EINVAL; + int retval = 0; list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, queue) { @@ -1376,6 +1392,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(ci, USBMODE_CM_DC); + hw_enable_vbus_intr(ci); hw_device_state(ci, ci->ep0out->qh.dma); } else { hw_device_state(ci, 0); @@ -1420,6 +1437,21 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -ENOTSUPP; } +/* Change Data+ pullup status + * this func is used by usb_gadget_connect/disconnet + */ +static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); + + if (is_on) + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); + else + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + + return 0; +} + static int ci13xxx_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int ci13xxx_stop(struct usb_gadget *gadget, @@ -1432,6 +1464,7 @@ static int ci13xxx_stop(struct usb_gadget *gadget, static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci13xxx_vbus_session, .wakeup = ci13xxx_wakeup, + .pullup = ci13xxx_pullup, .vbus_draw = ci13xxx_vbus_draw, .udc_start = ci13xxx_start, .udc_stop = ci13xxx_stop, @@ -1455,7 +1488,12 @@ static int init_eps(struct ci13xxx *ci) mEp->ep.name = mEp->name; mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; + /* + * for ep0: maxP defined in desc, for other + * eps, maxP is set by epautoconfig() called + * by gadget layer + */ + mEp->ep.maxpacket = (unsigned short)~0; INIT_LIST_HEAD(&mEp->qh.queue); mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, @@ -1475,6 +1513,7 @@ static int init_eps(struct ci13xxx *ci) else ci->ep0in = mEp; + mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; continue; } @@ -1484,6 +1523,17 @@ static int init_eps(struct ci13xxx *ci) return retval; } +static void destroy_eps(struct ci13xxx *ci) +{ + int i; + + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; + + dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); + } +} + /** * ci13xxx_start: register a gadget driver * @gadget: our gadget @@ -1517,8 +1567,10 @@ static int ci13xxx_start(struct usb_gadget *gadget, pm_runtime_get_sync(&ci->gadget.dev); if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { if (ci->vbus_active) { - if (ci->platdata->flags & CI13XXX_REGS_SHARED) + if (ci->platdata->flags & CI13XXX_REGS_SHARED) { hw_device_reset(ci, USBMODE_CM_DC); + hw_enable_vbus_intr(ci); + } } else { pm_runtime_put_sync(&ci->gadget.dev); goto done; @@ -1624,6 +1676,13 @@ static irqreturn_t udc_irq(struct ci13xxx *ci) } else { retval = IRQ_NONE; } + + intr = hw_read(ci, OP_OTGSC, ~0); + hw_write(ci, OP_OTGSC, ~0, intr); + + if (intr & (OTGSC_AVVIE & OTGSC_AVVIS)) + queue_work(ci->wq, &ci->vbus_work); + spin_unlock(&ci->lock); return retval; @@ -1691,7 +1750,7 @@ static int udc_start(struct ci13xxx *ci) if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { retval = -ENODEV; - goto free_pools; + goto destroy_eps; } } @@ -1699,6 +1758,7 @@ static int udc_start(struct ci13xxx *ci) retval = hw_device_reset(ci, USBMODE_CM_DC); if (retval) goto put_transceiver; + hw_enable_vbus_intr(ci); } retval = device_register(&ci->gadget.dev); @@ -1729,7 +1789,7 @@ static int udc_start(struct ci13xxx *ci) remove_trans: if (!IS_ERR_OR_NULL(ci->transceiver)) { - otg_set_peripheral(ci->transceiver->otg, &ci->gadget); + otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); } @@ -1742,6 +1802,8 @@ unreg_device: put_transceiver: if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) usb_put_phy(ci->transceiver); +destroy_eps: + destroy_eps(ci); free_pools: dma_pool_destroy(ci->td_pool); free_qh_pool: @@ -1756,18 +1818,15 @@ free_qh_pool: */ static void udc_stop(struct ci13xxx *ci) { - int i; - if (ci == NULL) return; - usb_del_gadget_udc(&ci->gadget); + hw_disable_vbus_intr(ci); + cancel_work_sync(&ci->vbus_work); - for (i = 0; i < ci->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; + usb_del_gadget_udc(&ci->gadget); - dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); - } + destroy_eps(ci); dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); @@ -1805,6 +1864,7 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci) rdrv->irq = udc_irq; rdrv->name = "gadget"; ci->roles[CI_ROLE_GADGET] = rdrv; + INIT_WORK(&ci->vbus_work, vbus_work); return 0; } diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c new file mode 100644 index 000000000000..416e3fc58fd0 --- /dev/null +++ b/drivers/usb/chipidea/usbmisc_imx6q.c @@ -0,0 +1,162 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "ci13xxx_imx.h" + +#define USB_DEV_MAX 4 + +#define BM_OVER_CUR_DIS BIT(7) + +struct imx6q_usbmisc { + void __iomem *base; + spinlock_t lock; + struct clk *clk; + struct usbmisc_usb_device usbdev[USB_DEV_MAX]; +}; + +static struct imx6q_usbmisc *usbmisc; + +static struct usbmisc_usb_device *get_usbdev(struct device *dev) +{ + int i, ret; + + for (i = 0; i < USB_DEV_MAX; i++) { + if (usbmisc->usbdev[i].dev == dev) + return &usbmisc->usbdev[i]; + else if (!usbmisc->usbdev[i].dev) + break; + } + + if (i >= USB_DEV_MAX) + return ERR_PTR(-EBUSY); + + ret = usbmisc_get_init_data(dev, &usbmisc->usbdev[i]); + if (ret) + return ERR_PTR(ret); + + return &usbmisc->usbdev[i]; +} + +static int usbmisc_imx6q_init(struct device *dev) +{ + + struct usbmisc_usb_device *usbdev; + unsigned long flags; + u32 reg; + + usbdev = get_usbdev(dev); + if (IS_ERR(usbdev)) + return PTR_ERR(usbdev); + + if (usbdev->disable_oc) { + spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base + usbdev->index * 4); + writel(reg | BM_OVER_CUR_DIS, + usbmisc->base + usbdev->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + + return 0; +} + +static const struct usbmisc_ops imx6q_usbmisc_ops = { + .init = usbmisc_imx6q_init, +}; + +static const struct of_device_id usbmisc_imx6q_dt_ids[] = { + { .compatible = "fsl,imx6q-usbmisc"}, + { /* sentinel */ } +}; + +static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev) +{ + struct resource *res; + struct imx6q_usbmisc *data; + int ret; + + if (usbmisc) + return -EBUSY; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_request_and_ioremap(&pdev->dev, res); + if (!data->base) + return -EADDRNOTAVAIL; + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, + "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); + return PTR_ERR(data->clk); + } + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, + "clk_prepare_enable failed, err=%d\n", ret); + return ret; + } + + ret = usbmisc_set_ops(&imx6q_usbmisc_ops); + if (ret) { + clk_disable_unprepare(data->clk); + return ret; + } + + usbmisc = data; + + return 0; +} + +static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev) +{ + usbmisc_unset_ops(&imx6q_usbmisc_ops); + clk_disable_unprepare(usbmisc->clk); + return 0; +} + +static struct platform_driver usbmisc_imx6q_driver = { + .probe = usbmisc_imx6q_probe, + .remove = __devexit_p(usbmisc_imx6q_remove), + .driver = { + .name = "usbmisc_imx6q", + .owner = THIS_MODULE, + .of_match_table = usbmisc_imx6q_dt_ids, + }, +}; + +int __init usbmisc_imx6q_drv_init(void) +{ + return platform_driver_register(&usbmisc_imx6q_driver); +} +subsys_initcall(usbmisc_imx6q_drv_init); + +void __exit usbmisc_imx6q_drv_exit(void) +{ + platform_driver_unregister(&usbmisc_imx6q_driver); +} +module_exit(usbmisc_imx6q_drv_exit); + +MODULE_ALIAS("platform:usbmisc-imx6q"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("driver for imx6q usb non-core registers"); +MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 56d6bf668488..36f2be4def2f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -39,7 +39,6 @@ #include <linux/serial.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> -#include <linux/serial.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/uaccess.h> @@ -826,7 +825,7 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) { struct acm *acm = tty->driver_data; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; struct usb_cdc_line_coding newline; int newctrl = acm->ctrlout; @@ -1104,7 +1103,8 @@ skip_normal_probe: } - if (data_interface->cur_altsetting->desc.bNumEndpoints < 2) + if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 || + control_interface->cur_altsetting->desc.bNumEndpoints == 0) return -EINVAL; epctrl = &control_interface->cur_altsetting->endpoint[0].desc; @@ -1298,7 +1298,8 @@ skip_countries: usb_set_intfdata(data_interface, acm); usb_get_intf(control_interface); - tty_register_device(acm_tty_driver, minor, &control_interface->dev); + tty_port_register_device(&acm->port, acm_tty_driver, minor, + &control_interface->dev); return 0; alloc_fail7: diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 65a55abb791f..5f0cb417b736 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -109,12 +109,14 @@ static struct usb_driver wdm_driver; /* return intfdata if we own the interface, else look up intf in the list */ static struct wdm_device *wdm_find_device(struct usb_interface *intf) { - struct wdm_device *desc = NULL; + struct wdm_device *desc; spin_lock(&wdm_device_list_lock); list_for_each_entry(desc, &wdm_device_list, device_list) if (desc->intf == intf) - break; + goto found; + desc = NULL; +found: spin_unlock(&wdm_device_list_lock); return desc; @@ -122,12 +124,14 @@ static struct wdm_device *wdm_find_device(struct usb_interface *intf) static struct wdm_device *wdm_find_device_by_minor(int minor) { - struct wdm_device *desc = NULL; + struct wdm_device *desc; spin_lock(&wdm_device_list_lock); list_for_each_entry(desc, &wdm_device_list, device_list) if (desc->intf->minor == minor) - break; + goto found; + desc = NULL; +found: spin_unlock(&wdm_device_list_lock); return desc; diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 9981984b365b..f70c1a1694ad 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -56,7 +56,7 @@ config USB_SUSPEND config USB_OTG bool "OTG support" - depends on USB && EXPERIMENTAL + depends on USB depends on USB_SUSPEND default n help diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index f4bdd0ce8d56..7199adccf444 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -702,6 +702,8 @@ int usb_get_configuration(struct usb_device *dev) if (result < 0) { dev_err(ddev, "unable to read config index %d " "descriptor/%s: %d\n", cfgno, "start", result); + if (result != -EPIPE) + goto err; dev_err(ddev, "chopping to %d config(s)\n", cfgno); dev->descriptor.bNumConfigurations = cfgno; break; diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index d95696584762..f460de31acee 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -496,6 +496,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, char *pages_start, *data_end, *speed; unsigned int length; ssize_t total_written = 0; + struct usb_device *childdev = NULL; /* don't bother with anything else if we're not writing any data */ if (*nbytes <= 0) @@ -589,14 +590,12 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, free_pages((unsigned long)pages_start, 1); /* Now look at all of this device's children. */ - for (chix = 0; chix < usbdev->maxchild; chix++) { - struct usb_device *childdev = usbdev->children[chix]; - + usb_hub_for_each_child(usbdev, chix, childdev) { if (childdev) { usb_lock_device(childdev); ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, childdev, bus, - level + 1, chix, ++cnt); + level + 1, chix - 1, ++cnt); usb_unlock_device(childdev); if (ret == -EFAULT) return total_written; @@ -624,7 +623,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, /* print devices for all busses */ list_for_each_entry(bus, &usb_bus_list, bus_list) { /* recurse through all children of the root hub */ - if (!bus->root_hub) + if (!bus_to_hcd(bus)->rh_registered) continue; usb_lock_device(bus->root_hub); ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index ebb8a9de8b5f..e0356cb859b5 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1928,6 +1928,38 @@ static int proc_get_capabilities(struct dev_state *ps, void __user *arg) return 0; } +static int proc_disconnect_claim(struct dev_state *ps, void __user *arg) +{ + struct usbdevfs_disconnect_claim dc; + struct usb_interface *intf; + + if (copy_from_user(&dc, arg, sizeof(dc))) + return -EFAULT; + + intf = usb_ifnum_to_if(ps->dev, dc.interface); + if (!intf) + return -EINVAL; + + if (intf->dev.driver) { + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER) && + strncmp(dc.driver, intf->dev.driver->name, + sizeof(dc.driver)) != 0) + return -EBUSY; + + if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER) && + strncmp(dc.driver, intf->dev.driver->name, + sizeof(dc.driver)) == 0) + return -EBUSY; + + dev_dbg(&intf->dev, "disconnect by usbfs\n"); + usb_driver_release_interface(driver, intf); + } + + return claimintf(ps, dc.interface); +} + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -2101,6 +2133,9 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, case USBDEVFS_GET_CAPABILITIES: ret = proc_get_capabilities(ps, p); break; + case USBDEVFS_DISCONNECT_CLAIM: + ret = proc_disconnect_claim(ps, p); + break; } usb_unlock_device(dev); if (ret >= 0) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 445455a4429b..ddd820d25288 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -125,10 +125,9 @@ store_remove_id(struct device_driver *driver, const char *buf, size_t count) { struct usb_dynid *dynid, *n; struct usb_driver *usb_driver = to_usb_driver(driver); - u32 idVendor = 0; - u32 idProduct = 0; - int fields = 0; - int retval = 0; + u32 idVendor; + u32 idProduct; + int fields; fields = sscanf(buf, "%x %x", &idVendor, &idProduct); if (fields < 2) @@ -141,14 +140,10 @@ store_remove_id(struct device_driver *driver, const char *buf, size_t count) (id->idProduct == idProduct)) { list_del(&dynid->node); kfree(dynid); - retval = 0; break; } } spin_unlock(&usb_driver->dynids.lock); - - if (retval) - return retval; return count; } static DRIVER_ATTR(remove_id, S_IRUGO | S_IWUSR, show_dynids, store_remove_id); diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index db7fe50c23d4..68cc6532e749 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -24,10 +24,6 @@ struct ep_device { #define to_ep_device(_dev) \ container_of(_dev, struct ep_device, dev) -struct device_type usb_ep_device_type = { - .name = "usb_endpoint", -}; - struct ep_attribute { struct attribute attr; ssize_t (*show)(struct usb_device *, @@ -172,6 +168,11 @@ static void ep_device_release(struct device *dev) kfree(ep_dev); } +struct device_type usb_ep_device_type = { + .name = "usb_endpoint", + .release = ep_device_release, +}; + int usb_create_ep_devs(struct device *parent, struct usb_host_endpoint *endpoint, struct usb_device *udev) @@ -190,7 +191,6 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.groups = ep_dev_groups; ep_dev->dev.type = &usb_ep_device_type; ep_dev->dev.parent = parent; - ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); retval = device_register(&ep_dev->dev); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index bc84106ac057..1e741bca0265 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -22,6 +22,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/bcd.h> #include <linux/module.h> #include <linux/version.h> #include <linux/kernel.h> @@ -123,9 +124,8 @@ static inline int is_root_hub(struct usb_device *udev) */ /*-------------------------------------------------------------------------*/ - -#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff) -#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff) +#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff)) +#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) /* usb 3.0 root hub device descriptor */ static const u8 usb3_rh_dev_descriptor[18] = { @@ -1011,10 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (retval) { dev_err (parent_dev, "can't register root hub for %s, %d\n", dev_name(&usb_dev->dev), retval); - } - mutex_unlock(&usb_bus_list_lock); - - if (retval == 0) { + } else { spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 1; spin_unlock_irq (&hcd_root_hub_lock); @@ -1023,6 +1020,7 @@ static int register_root_hub(struct usb_hcd *hcd) if (HCD_DEAD(hcd)) usb_hc_died (hcd); /* This time clean up */ } + mutex_unlock(&usb_bus_list_lock); return retval; } @@ -2153,15 +2151,8 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; - unsigned long flags; irqreturn_t rc; - /* IRQF_DISABLED doesn't work correctly with shared IRQs - * when the first handler doesn't use it. So let's just - * assume it's never used. - */ - local_irq_save(flags); - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2169,7 +2160,6 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; - local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2357,14 +2347,6 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { - - /* IRQF_DISABLED doesn't work as advertised when used together - * with IRQF_SHARED. As usb_hcd_irq() will always disable - * interrupts we can remove it here. - */ - if (irqflags & IRQF_SHARED) - irqflags &= ~IRQF_DISABLED; - snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 128a804c42f4..673ee4696262 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -39,6 +39,13 @@ #endif #endif +struct usb_port { + struct usb_device *child; + struct device dev; + struct dev_state *port_owner; + enum usb_port_connect_type connect_type; +}; + struct usb_hub { struct device *intfdev; /* the "interface" device */ struct usb_device *hdev; @@ -83,7 +90,7 @@ struct usb_hub { u8 indicator[USB_MAXCHILDREN]; struct delayed_work leds; struct delayed_work init_work; - struct dev_state **port_owners; + struct usb_port **ports; }; static inline int hub_is_superspeed(struct usb_device *hdev) @@ -156,6 +163,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); #define HUB_DEBOUNCE_STEP 25 #define HUB_DEBOUNCE_STABLE 100 +#define to_usb_port(_dev) \ + container_of(_dev, struct usb_port, dev) static int usb_reset_and_verify_device(struct usb_device *udev); @@ -174,7 +183,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus) /* Note that hdev or one of its children must be locked! */ static struct usb_hub *hdev_to_hub(struct usb_device *hdev) { - if (!hdev || !hdev->actconfig) + if (!hdev || !hdev->actconfig || !hdev->maxchild) return NULL; return usb_get_intfdata(hdev->actconfig->interface[0]); } @@ -869,8 +878,8 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) struct usb_device *hdev = hub->hdev; int ret = 0; - if (hdev->children[port1-1] && set_state) - usb_set_device_state(hdev->children[port1-1], + if (hub->ports[port1 - 1]->child && set_state) + usb_set_device_state(hub->ports[port1 - 1]->child, USB_STATE_NOTATTACHED); if (!hub->error && !hub_is_superspeed(hub->hdev)) ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); @@ -1026,7 +1035,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) * which ports need attention. */ for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - struct usb_device *udev = hdev->children[port1-1]; + struct usb_device *udev = hub->ports[port1 - 1]->child; u16 portstatus, portchange; portstatus = portchange = 0; @@ -1191,8 +1200,8 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) if (type != HUB_SUSPEND) { /* Disconnect all the children */ for (i = 0; i < hdev->maxchild; ++i) { - if (hdev->children[i]) - usb_disconnect(&hdev->children[i]); + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); } } @@ -1222,6 +1231,52 @@ static int hub_post_reset(struct usb_interface *intf) return 0; } +static void usb_port_device_release(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + + kfree(port_dev); +} + +static void usb_hub_remove_port_device(struct usb_hub *hub, + int port1) +{ + device_unregister(&hub->ports[port1 - 1]->dev); +} + +struct device_type usb_port_device_type = { + .name = "usb_port", + .release = usb_port_device_release, +}; + +static int usb_hub_create_port_device(struct usb_hub *hub, + int port1) +{ + struct usb_port *port_dev = NULL; + int retval; + + port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); + if (!port_dev) { + retval = -ENOMEM; + goto exit; + } + + hub->ports[port1 - 1] = port_dev; + port_dev->dev.parent = hub->intfdev; + port_dev->dev.type = &usb_port_device_type; + dev_set_name(&port_dev->dev, "port%d", port1); + + retval = device_register(&port_dev->dev); + if (retval) + goto error_register; + return 0; + +error_register: + put_device(&port_dev->dev); +exit: + return retval; +} + static int hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint) { @@ -1231,7 +1286,7 @@ static int hub_configure(struct usb_hub *hub, u16 hubstatus, hubchange; u16 wHubCharacteristics; unsigned int pipe; - int maxp, ret; + int maxp, ret, i; char *message = "out of memory"; hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); @@ -1271,11 +1326,9 @@ static int hub_configure(struct usb_hub *hub, dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, (hdev->maxchild == 1) ? "" : "s"); - hdev->children = kzalloc(hdev->maxchild * - sizeof(struct usb_device *), GFP_KERNEL); - hub->port_owners = kzalloc(hdev->maxchild * sizeof(struct dev_state *), - GFP_KERNEL); - if (!hdev->children || !hub->port_owners) { + hub->ports = kzalloc(hdev->maxchild * sizeof(struct usb_port *), + GFP_KERNEL); + if (!hub->ports) { ret = -ENOMEM; goto fail; } @@ -1484,6 +1537,11 @@ static int hub_configure(struct usb_hub *hub, if (hub->has_indicators && blinkenlights) hub->indicator [0] = INDICATOR_CYCLE; + for (i = 0; i < hdev->maxchild; i++) + if (usb_hub_create_port_device(hub, i + 1) < 0) + dev_err(hub->intfdev, + "couldn't create port%d device.\n", i + 1); + hub_activate(hub, HUB_INIT); return 0; @@ -1508,6 +1566,7 @@ static void hub_disconnect(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata(intf); struct usb_device *hdev = interface_to_usbdev(intf); + int i; /* Take the hub off the event list and don't let it be added again */ spin_lock_irq(&hub_event_lock); @@ -1523,14 +1582,16 @@ static void hub_disconnect(struct usb_interface *intf) hub_quiesce(hub, HUB_DISCONNECT); usb_set_intfdata (intf, NULL); + + for (i = 0; i < hdev->maxchild; i++) + usb_hub_remove_port_device(hub, i + 1); hub->hdev->maxchild = 0; if (hub->hdev->speed == USB_SPEED_HIGH) highspeed_hubs--; usb_free_urb(hub->urb); - kfree(hdev->children); - kfree(hub->port_owners); + kfree(hub->ports); kfree(hub->descriptor); kfree(hub->status); kfree(hub->buffer); @@ -1617,6 +1678,7 @@ static int hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) { struct usb_device *hdev = interface_to_usbdev (intf); + struct usb_hub *hub = hdev_to_hub(hdev); /* assert ifno == 0 (part of hub spec) */ switch (code) { @@ -1630,11 +1692,11 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) else { info->nports = hdev->maxchild; for (i = 0; i < info->nports; i++) { - if (hdev->children[i] == NULL) + if (hub->ports[i]->child == NULL) info->port[i] = 0; else info->port[i] = - hdev->children[i]->devnum; + hub->ports[i]->child->devnum; } } spin_unlock_irq(&device_state_lock); @@ -1662,7 +1724,7 @@ static int find_port_owner(struct usb_device *hdev, unsigned port1, /* This assumes that devices not managed by the hub driver * will always have maxchild equal to 0. */ - *ppowner = &(hdev_to_hub(hdev)->port_owners[port1 - 1]); + *ppowner = &(hdev_to_hub(hdev)->ports[port1 - 1]->port_owner); return 0; } @@ -1699,16 +1761,14 @@ int usb_hub_release_port(struct usb_device *hdev, unsigned port1, void usb_hub_release_all_ports(struct usb_device *hdev, struct dev_state *owner) { + struct usb_hub *hub = hdev_to_hub(hdev); int n; - struct dev_state **powner; - n = find_port_owner(hdev, 1, &powner); - if (n == 0) { - for (; n < hdev->maxchild; (++n, ++powner)) { - if (*powner == owner) - *powner = NULL; - } + for (n = 0; n < hdev->maxchild; n++) { + if (hub->ports[n]->port_owner == owner) + hub->ports[n]->port_owner = NULL; } + } /* The caller must hold udev's lock */ @@ -1719,17 +1779,17 @@ bool usb_device_is_owned(struct usb_device *udev) if (udev->state == USB_STATE_NOTATTACHED || !udev->parent) return false; hub = hdev_to_hub(udev->parent); - return !!hub->port_owners[udev->portnum - 1]; + return !!hub->ports[udev->portnum - 1]->port_owner; } - static void recursively_mark_NOTATTACHED(struct usb_device *udev) { + struct usb_hub *hub = hdev_to_hub(udev); int i; for (i = 0; i < udev->maxchild; ++i) { - if (udev->children[i]) - recursively_mark_NOTATTACHED(udev->children[i]); + if (hub->ports[i]->child) + recursively_mark_NOTATTACHED(hub->ports[i]->child); } if (udev->state == USB_STATE_SUSPENDED) udev->active_duration -= jiffies; @@ -1893,6 +1953,7 @@ static void hub_free_dev(struct usb_device *udev) void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; + struct usb_hub *hub = hdev_to_hub(udev); int i; /* mark the device as inactive, so any further urb submissions for @@ -1907,8 +1968,8 @@ void usb_disconnect(struct usb_device **pdev) /* Free up all the children before we remove this device */ for (i = 0; i < udev->maxchild; i++) { - if (udev->children[i]) - usb_disconnect(&udev->children[i]); + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); } /* deallocate hcd/hardware state ... nuking all pending urbs and @@ -2113,7 +2174,8 @@ static void set_usb_port_removable(struct usb_device *udev) return; if (hub_is_superspeed(hdev)) { - if (hub->descriptor->u.ss.DeviceRemovable & (1 << port)) + if (le16_to_cpu(hub->descriptor->u.ss.DeviceRemovable) + & (1 << port)) removable = false; } else { if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8))) @@ -3072,7 +3134,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; - udev = hdev->children [port1-1]; + udev = hub->ports[port1 - 1]->child; if (udev && udev->can_submit) { dev_warn(&intf->dev, "port %d nyet suspended\n", port1); if (PMSG_IS_AUTO(msg)) @@ -3999,7 +4061,7 @@ hub_power_remaining (struct usb_hub *hub) remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent; for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - struct usb_device *udev = hdev->children[port1 - 1]; + struct usb_device *udev = hub->ports[port1 - 1]->child; int delta; if (!udev) @@ -4063,7 +4125,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif /* Try to resuscitate an existing device */ - udev = hdev->children[port1-1]; + udev = hub->ports[port1 - 1]->child; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { usb_lock_device(udev); @@ -4092,7 +4154,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* Disconnect any existing devices under this port */ if (udev) - usb_disconnect(&hdev->children[port1-1]); + usb_disconnect(&hub->ports[port1 - 1]->child); clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical @@ -4228,7 +4290,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (hdev->state == USB_STATE_NOTATTACHED) status = -ENOTCONN; else - hdev->children[port1-1] = udev; + hub->ports[port1 - 1]->child = udev; spin_unlock_irq(&device_state_lock); /* Run it through the hoops (find a driver, etc) */ @@ -4236,7 +4298,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = usb_new_device(udev); if (status) { spin_lock_irq(&device_state_lock); - hdev->children[port1-1] = NULL; + hub->ports[port1 - 1]->child = NULL; spin_unlock_irq(&device_state_lock); } } @@ -4282,7 +4344,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, int ret; hdev = hub->hdev; - udev = hdev->children[port-1]; + udev = hub->ports[port - 1]->child; if (!hub_is_superspeed(hdev)) { if (!(portchange & USB_PORT_STAT_C_SUSPEND)) return 0; @@ -4436,7 +4498,7 @@ static void hub_events(void) */ if (!(portstatus & USB_PORT_STAT_ENABLE) && !connect_change - && hdev->children[i-1]) { + && hub->ports[i - 1]->child) { dev_err (hub_dev, "port %i " "disabled by hub (EMI?), " @@ -4993,3 +5055,75 @@ void usb_queue_reset_device(struct usb_interface *iface) schedule_work(&iface->reset_ws); } EXPORT_SYMBOL_GPL(usb_queue_reset_device); + +/** + * usb_hub_find_child - Get the pointer of child device + * attached to the port which is specified by @port1. + * @hdev: USB device belonging to the usb hub + * @port1: port num to indicate which port the child device + * is attached to. + * + * USB drivers call this function to get hub's child device + * pointer. + * + * Return NULL if input param is invalid and + * child's usb_device pointer if non-NULL. + */ +struct usb_device *usb_hub_find_child(struct usb_device *hdev, + int port1) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + if (port1 < 1 || port1 > hdev->maxchild) + return NULL; + return hub->ports[port1 - 1]->child; +} +EXPORT_SYMBOL_GPL(usb_hub_find_child); + +/** + * usb_set_hub_port_connect_type - set hub port connect type. + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * @type: connect type of the port + */ +void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, + enum usb_port_connect_type type) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + hub->ports[port1 - 1]->connect_type = type; +} + +/** + * usb_get_hub_port_connect_type - Get the port's connect type + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * + * Return connect type of the port and if input params are + * invalid, return USB_PORT_CONNECT_TYPE_UNKNOWN. + */ +enum usb_port_connect_type +usb_get_hub_port_connect_type(struct usb_device *hdev, int port1) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + return hub->ports[port1 - 1]->connect_type; +} + +#ifdef CONFIG_ACPI +/** + * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * + * Return port's acpi handle if successful, NULL if params are + * invaild. + */ +acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, + int port1) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + return DEVICE_ACPI_HANDLE(&hub->ports[port1 - 1]->dev); +} +#endif diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0ab7da2283e3..1ed5afd91e6d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -146,8 +146,6 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, dr->wIndex = cpu_to_le16(index); dr->wLength = cpu_to_le16(size); - /* dbg("usb_control_msg"); */ - ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); kfree(dr); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f15501f4c585..fdefd9c7f7af 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Microchip Joss Optical infrared touchboard device */ + { USB_DEVICE(0x04d8, 0x000c), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ { USB_DEVICE(0x04e8, 0x6601), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -205,7 +209,7 @@ void usb_detect_quirks(struct usb_device *udev) * for all devices. It will affect things like hub resets * and EMF-related port disables. */ - if (!(udev->quirks & USB_QUIRK_RESET_MORPHS)) + if (!(udev->quirks & USB_QUIRK_RESET)) udev->persist_enabled = 1; #endif /* CONFIG_PM */ } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 682e8256b95d..818e4a024d0d 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -196,7 +196,7 @@ show_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, char * struct usb_device *udev; udev = to_usb_device(dev); - return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET_MORPHS)); + return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET)); } static ssize_t @@ -204,15 +204,15 @@ set_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int config; + int val; - if (sscanf(buf, "%d", &config) != 1 || config < 0 || config > 1) + if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1) return -EINVAL; usb_lock_device(udev); - if (config) - udev->quirks |= USB_QUIRK_RESET_MORPHS; + if (val) + udev->quirks |= USB_QUIRK_RESET; else - udev->quirks &= ~USB_QUIRK_RESET_MORPHS; + udev->quirks &= ~USB_QUIRK_RESET; usb_unlock_device(udev); return count; } diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index 8947b203d5a4..0ef7d42d8abe 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -19,20 +19,91 @@ #include "usb.h" -static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle) +/** + * usb_acpi_power_manageable - check whether usb port has + * acpi power resource. + * @hdev: USB device belonging to the usb hub + * @index: port index based zero + * + * Return true if the port has acpi power resource and false if no. + */ +bool usb_acpi_power_manageable(struct usb_device *hdev, int index) +{ + acpi_handle port_handle; + int port1 = index + 1; + + port_handle = usb_get_hub_port_acpi_handle(hdev, + port1); + if (port_handle) + return acpi_bus_power_manageable(port_handle); + else + return false; +} +EXPORT_SYMBOL_GPL(usb_acpi_power_manageable); + +/** + * usb_acpi_set_power_state - control usb port's power via acpi power + * resource + * @hdev: USB device belonging to the usb hub + * @index: port index based zero + * @enable: power state expected to be set + * + * Notice to use usb_acpi_power_manageable() to check whether the usb port + * has acpi power resource before invoking this function. + * + * Returns 0 on success, else negative errno. + */ +int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) +{ + acpi_handle port_handle; + unsigned char state; + int port1 = index + 1; + int error = -EINVAL; + + port_handle = (acpi_handle)usb_get_hub_port_acpi_handle(hdev, + port1); + if (!port_handle) + return error; + + if (enable) + state = ACPI_STATE_D0; + else + state = ACPI_STATE_D3_COLD; + + error = acpi_bus_set_power(port_handle, state); + if (!error) + dev_dbg(&hdev->dev, "The power of hub port %d was set to %d\n", + port1, enable); + else + dev_dbg(&hdev->dev, "The power of hub port failed to be set\n"); + + return error; +} +EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); + +static int usb_acpi_check_port_connect_type(struct usb_device *hdev, + acpi_handle handle, int port1) { acpi_status status; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *upc; + struct acpi_pld pld; int ret = 0; - status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); - + /* + * Accoding to ACPI Spec 9.13. PLD indicates whether usb port is + * user visible and _UPC indicates whether it is connectable. If + * the port was visible and connectable, it could be freely connected + * and disconnected with USB devices. If no visible and connectable, + * a usb device is directly hard-wired to the port. If no visible and + * no connectable, the port would be not used. + */ + status = acpi_get_physical_device_location(handle, &pld); if (ACPI_FAILURE(status)) return -ENODEV; + status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); upc = buffer.pointer; - if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4) { ret = -EINVAL; @@ -40,69 +111,107 @@ static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle) } if (upc->package.elements[0].integer.value) - udev->removable = USB_DEVICE_REMOVABLE; - else - udev->removable = USB_DEVICE_FIXED; + if (pld.user_visible) + usb_set_hub_port_connect_type(hdev, port1, + USB_PORT_CONNECT_TYPE_HOT_PLUG); + else + usb_set_hub_port_connect_type(hdev, port1, + USB_PORT_CONNECT_TYPE_HARD_WIRED); + else if (!pld.user_visible) + usb_set_hub_port_connect_type(hdev, port1, USB_PORT_NOT_USED); out: kfree(upc); return ret; } -static int usb_acpi_check_pld(struct usb_device *udev, acpi_handle handle) -{ - acpi_status status; - struct acpi_pld pld; - - status = acpi_get_physical_device_location(handle, &pld); - - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (pld.user_visible) - udev->removable = USB_DEVICE_REMOVABLE; - else - udev->removable = USB_DEVICE_FIXED; - - return 0; -} - static int usb_acpi_find_device(struct device *dev, acpi_handle *handle) { struct usb_device *udev; - struct device *parent; acpi_handle *parent_handle; - - if (!is_usb_device(dev)) - return -ENODEV; - - udev = to_usb_device(dev); - parent = dev->parent; - parent_handle = DEVICE_ACPI_HANDLE(parent); - - if (!parent_handle) - return -ENODEV; - - *handle = acpi_get_child(parent_handle, udev->portnum); - - if (!*handle) - return -ENODEV; + int port_num; /* - * PLD will tell us whether a port is removable to the user or - * not. If we don't get an answer from PLD (it's not present - * or it's malformed) then try to infer it from UPC. If a - * device isn't connectable then it's probably not removable. + * In the ACPI DSDT table, only usb root hub and usb ports are + * acpi device nodes. The hierarchy like following. + * Device (EHC1) + * Device (HUBN) + * Device (PR01) + * Device (PR11) + * Device (PR12) + * Device (PR13) + * ... + * So all binding process is divided into two parts. binding + * root hub and usb ports. */ - if (usb_acpi_check_pld(udev, *handle) != 0) - usb_acpi_check_upc(udev, *handle); + if (is_usb_device(dev)) { + udev = to_usb_device(dev); + if (udev->parent) { + enum usb_port_connect_type type; + + /* + * According usb port's connect type to set usb device's + * removability. + */ + type = usb_get_hub_port_connect_type(udev->parent, + udev->portnum); + switch (type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + udev->removable = USB_DEVICE_REMOVABLE; + break; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + udev->removable = USB_DEVICE_FIXED; + break; + default: + udev->removable = USB_DEVICE_REMOVABLE_UNKNOWN; + break; + } + + return -ENODEV; + } + + /* root hub's parent is the usb hcd. */ + parent_handle = DEVICE_ACPI_HANDLE(dev->parent); + *handle = acpi_get_child(parent_handle, udev->portnum); + if (!*handle) + return -ENODEV; + return 0; + } else if (is_usb_port(dev)) { + sscanf(dev_name(dev), "port%d", &port_num); + /* Get the struct usb_device point of port's hub */ + udev = to_usb_device(dev->parent->parent); + + /* + * The root hub ports' parent is the root hub. The non-root-hub + * ports' parent is the parent hub port which the hub is + * connected to. + */ + if (!udev->parent) { + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev), + port_num); + if (!*handle) + return -ENODEV; + } else { + parent_handle = + usb_get_hub_port_acpi_handle(udev->parent, + udev->portnum); + if (!parent_handle) + return -ENODEV; + + *handle = acpi_get_child(parent_handle, port_num); + if (!*handle) + return -ENODEV; + } + usb_acpi_check_port_connect_type(udev, *handle, port_num); + } else + return -ENODEV; return 0; } static struct acpi_bus_type usb_acpi_bus = { .bus = &usb_bus_type, - .find_bridge = NULL, + .find_bridge = usb_acpi_find_device, .find_device = usb_acpi_find_device, }; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index acb103c5c391..1c528c1bf0be 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -1,4 +1,5 @@ #include <linux/pm.h> +#include <linux/acpi.h> struct dev_state; @@ -115,6 +116,7 @@ extern struct bus_type usb_bus_type; extern struct device_type usb_device_type; extern struct device_type usb_if_device_type; extern struct device_type usb_ep_device_type; +extern struct device_type usb_port_device_type; extern struct usb_device_driver usb_generic_driver; static inline int is_usb_device(const struct device *dev) @@ -132,6 +134,11 @@ static inline int is_usb_endpoint(const struct device *dev) return dev->type == &usb_ep_device_type; } +static inline int is_usb_port(const struct device *dev) +{ + return dev->type == &usb_port_device_type; +} + /* Do the same for device drivers and interface drivers. */ static inline int is_usb_device_driver(struct device_driver *drv) @@ -162,10 +169,16 @@ extern void usb_notify_add_device(struct usb_device *udev); extern void usb_notify_remove_device(struct usb_device *udev); extern void usb_notify_add_bus(struct usb_bus *ubus); extern void usb_notify_remove_bus(struct usb_bus *ubus); +extern enum usb_port_connect_type + usb_get_hub_port_connect_type(struct usb_device *hdev, int port1); +extern void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, + enum usb_port_connect_type type); #ifdef CONFIG_ACPI extern int usb_acpi_register(void); extern void usb_acpi_unregister(void); +extern acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, + int port1); #else static inline int usb_acpi_register(void) { return 0; }; static inline void usb_acpi_unregister(void) { }; diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index d13c60f42139..f6a6e070c2ac 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -2,8 +2,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB && USB_GADGET) select USB_OTG_UTILS - select USB_GADGET_DUALSPEED - select USB_GADGET_SUPERSPEED select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c34452a7304f..b415c0c859d3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -50,6 +50,7 @@ #include <linux/dma-mapping.h> #include <linux/of.h> +#include <linux/usb/otg.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -99,6 +100,7 @@ void dwc3_put_device_id(int id) ret = test_bit(id, dwc3_devs); WARN(!ret, "dwc3: ID %d not in use\n", id); + smp_mb__before_clear_bit(); clear_bit(id, dwc3_devs); } EXPORT_SYMBOL_GPL(dwc3_put_device_id); @@ -136,6 +138,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); mdelay(100); /* Clear USB3 PHY reset */ @@ -436,16 +440,21 @@ static int __devinit dwc3_probe(struct platform_device *pdev) dev_err(dev, "missing IRQ\n"); return -ENODEV; } - dwc->xhci_resources[1] = *res; + dwc->xhci_resources[1].start = res->start; + dwc->xhci_resources[1].end = res->end; + dwc->xhci_resources[1].flags = res->flags; + dwc->xhci_resources[1].name = res->name; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory resource\n"); return -ENODEV; } - dwc->xhci_resources[0] = *res; + dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; + dwc->xhci_resources[0].flags = res->flags; + dwc->xhci_resources[0].name = res->name; /* * Request memory region but exclude xHCI regs, @@ -459,12 +468,24 @@ static int __devinit dwc3_probe(struct platform_device *pdev) return -ENOMEM; } - regs = devm_ioremap(dev, res->start, resource_size(res)); + regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); if (!regs) { dev_err(dev, "ioremap failed\n"); return -ENOMEM; } + dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(dwc->usb2_phy)) { + dev_err(dev, "no usb2 phy configured\n"); + return -EPROBE_DEFER; + } + + dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); + if (IS_ERR_OR_NULL(dwc->usb3_phy)) { + dev_err(dev, "no usb3 phy configured\n"); + return -EPROBE_DEFER; + } + spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 151eca876dfd..243affc93431 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -457,7 +457,6 @@ enum dwc3_phy { enum dwc3_ep0_next { DWC3_EP0_UNKNOWN = 0, DWC3_EP0_COMPLETE, - DWC3_EP0_NRDY_SETUP, DWC3_EP0_NRDY_DATA, DWC3_EP0_NRDY_STATUS, }; @@ -624,6 +623,8 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @mode: mode of operation + * @usb2_phy: pointer to USB2 PHY + * @usb3_phy: pointer to USB3 PHY * @is_selfpowered: true when we are selfpowered * @three_stage_setup: set if we perform a three phase setup * @ep0_bounced: true when we used bounce buffer @@ -667,6 +668,9 @@ struct dwc3 { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; + struct usb_phy *usb2_phy; + struct usb_phy *usb3_phy; + void __iomem *regs; size_t regs_size; @@ -779,7 +783,6 @@ struct dwc3_event_depevt { #define DEPEVT_STREAMEVT_NOTFOUND 2 /* Control-only Status */ -#define DEPEVT_STATUS_CONTROL_SETUP 0 #define DEPEVT_STATUS_CONTROL_DATA 1 #define DEPEVT_STATUS_CONTROL_STATUS 2 diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index b8f00389fa34..ca6597853f90 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -19,16 +19,74 @@ #include <linux/platform_data/dwc3-exynos.h> #include <linux/dma-mapping.h> #include <linux/clk.h> +#include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> #include "core.h" struct dwc3_exynos { struct platform_device *dwc3; + struct platform_device *usb2_phy; + struct platform_device *usb3_phy; struct device *dev; struct clk *clk; }; +static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos) +{ + struct nop_usb_xceiv_platform_data pdata; + struct platform_device *pdev; + int ret; + + memset(&pdata, 0x00, sizeof(pdata)); + + pdev = platform_device_alloc("nop_usb_xceiv", 0); + if (!pdev) + return -ENOMEM; + + exynos->usb2_phy = pdev; + pdata.type = USB_PHY_TYPE_USB2; + + ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata)); + if (ret) + goto err1; + + pdev = platform_device_alloc("nop_usb_xceiv", 1); + if (!pdev) { + ret = -ENOMEM; + goto err1; + } + + exynos->usb3_phy = pdev; + pdata.type = USB_PHY_TYPE_USB3; + + ret = platform_device_add_data(exynos->usb3_phy, &pdata, sizeof(pdata)); + if (ret) + goto err2; + + ret = platform_device_add(exynos->usb2_phy); + if (ret) + goto err2; + + ret = platform_device_add(exynos->usb3_phy); + if (ret) + goto err3; + + return 0; + +err3: + platform_device_del(exynos->usb2_phy); + +err2: + platform_device_put(exynos->usb3_phy); + +err1: + platform_device_put(exynos->usb2_phy); + + return ret; +} + static int __devinit dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos_data *pdata = pdev->dev.platform_data; @@ -51,6 +109,12 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev) if (devid < 0) goto err1; + ret = dwc3_exynos_register_phys(exynos); + if (ret) { + dev_err(&pdev->dev, "couldn't register PHYs\n"); + goto err1; + } + dwc3 = platform_device_alloc("dwc3", devid); if (!dwc3) { dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); @@ -120,6 +184,8 @@ static int __devexit dwc3_exynos_remove(struct platform_device *pdev) struct dwc3_exynos_data *pdata = pdev->dev.platform_data; platform_device_unregister(exynos->dwc3); + platform_device_unregister(exynos->usb2_phy); + platform_device_unregister(exynos->usb3_phy); dwc3_put_device_id(exynos->dwc3->id); diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 479dc047da3a..ee57a10d90d0 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -48,6 +48,9 @@ #include <linux/io.h> #include <linux/of.h> +#include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> + #include "core.h" /* @@ -131,6 +134,8 @@ struct dwc3_omap { spinlock_t lock; struct platform_device *dwc3; + struct platform_device *usb2_phy; + struct platform_device *usb3_phy; struct device *dev; int irq; @@ -152,6 +157,59 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } +static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap) +{ + struct nop_usb_xceiv_platform_data pdata; + struct platform_device *pdev; + int ret; + + memset(&pdata, 0x00, sizeof(pdata)); + + pdev = platform_device_alloc("nop_usb_xceiv", 0); + if (!pdev) + return -ENOMEM; + + omap->usb2_phy = pdev; + pdata.type = USB_PHY_TYPE_USB2; + + ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata)); + if (ret) + goto err1; + + pdev = platform_device_alloc("nop_usb_xceiv", 1); + if (!pdev) { + ret = -ENOMEM; + goto err1; + } + + omap->usb3_phy = pdev; + pdata.type = USB_PHY_TYPE_USB3; + + ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata)); + if (ret) + goto err2; + + ret = platform_device_add(omap->usb2_phy); + if (ret) + goto err2; + + ret = platform_device_add(omap->usb3_phy); + if (ret) + goto err3; + + return 0; + +err3: + platform_device_del(omap->usb2_phy); + +err2: + platform_device_put(omap->usb3_phy); + +err1: + platform_device_put(omap->usb2_phy); + + return ret; +} static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) { @@ -251,6 +309,12 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) return -ENOMEM; } + ret = dwc3_omap_register_phys(omap); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + return ret; + } + devid = dwc3_get_device_id(); if (devid < 0) return -ENODEV; @@ -371,6 +435,8 @@ static int __devexit dwc3_omap_remove(struct platform_device *pdev) struct dwc3_omap *omap = platform_get_drvdata(pdev); platform_device_unregister(omap->dwc3); + platform_device_unregister(omap->usb2_phy); + platform_device_unregister(omap->usb3_phy); dwc3_put_device_id(omap->dwc3->id); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index a9ca9adba391..94f550e37f98 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -42,6 +42,9 @@ #include <linux/pci.h> #include <linux/platform_device.h> +#include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> + #include "core.h" /* FIXME define these in <linux/pci_ids.h> */ @@ -51,8 +54,64 @@ struct dwc3_pci { struct device *dev; struct platform_device *dwc3; + struct platform_device *usb2_phy; + struct platform_device *usb3_phy; }; +static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue) +{ + struct nop_usb_xceiv_platform_data pdata; + struct platform_device *pdev; + int ret; + + memset(&pdata, 0x00, sizeof(pdata)); + + pdev = platform_device_alloc("nop_usb_xceiv", 0); + if (!pdev) + return -ENOMEM; + + glue->usb2_phy = pdev; + pdata.type = USB_PHY_TYPE_USB2; + + ret = platform_device_add_data(glue->usb2_phy, &pdata, sizeof(pdata)); + if (ret) + goto err1; + + pdev = platform_device_alloc("nop_usb_xceiv", 1); + if (!pdev) { + ret = -ENOMEM; + goto err1; + } + + glue->usb3_phy = pdev; + pdata.type = USB_PHY_TYPE_USB3; + + ret = platform_device_add_data(glue->usb3_phy, &pdata, sizeof(pdata)); + if (ret) + goto err2; + + ret = platform_device_add(glue->usb2_phy); + if (ret) + goto err2; + + ret = platform_device_add(glue->usb3_phy); + if (ret) + goto err3; + + return 0; + +err3: + platform_device_del(glue->usb2_phy); + +err2: + platform_device_put(glue->usb3_phy); + +err1: + platform_device_put(glue->usb2_phy); + + return ret; +} + static int __devinit dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) { @@ -80,6 +139,12 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci, pci_set_power_state(pci, PCI_D0); pci_set_master(pci); + ret = dwc3_pci_register_phys(glue); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + return ret; + } + devid = dwc3_get_device_id(); if (devid < 0) { ret = -ENOMEM; @@ -144,6 +209,8 @@ static void __devexit dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->usb2_phy); + platform_device_unregister(glue->usb3_phy); dwc3_put_device_id(glue->dwc3->id); platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 9b94886b66e5..d7da073a23fe 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -125,7 +125,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - int ret = 0; req->request.actual = 0; req->request.status = -EINPROGRESS; @@ -156,16 +155,72 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, dep->flags &= ~(DWC3_EP_PENDING_REQUEST | DWC3_EP0_DIR_IN); - } else if (dwc->delayed_status) { + + return 0; + } + + /* + * In case gadget driver asked us to delay the STATUS phase, + * handle it here. + */ + if (dwc->delayed_status) { + unsigned direction; + + direction = !dwc->ep0_expect_in; dwc->delayed_status = false; if (dwc->ep0state == EP0_STATUS_PHASE) - __dwc3_ep0_do_control_status(dwc, dwc->eps[1]); + __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); else dev_dbg(dwc->dev, "too early for delayed status\n"); + + return 0; } - return ret; + /* + * Unfortunately we have uncovered a limitation wrt the Data Phase. + * + * Section 9.4 says we can wait for the XferNotReady(DATA) event to + * come before issueing Start Transfer command, but if we do, we will + * miss situations where the host starts another SETUP phase instead of + * the DATA phase. Such cases happen at least on TD.7.6 of the Link + * Layer Compliance Suite. + * + * The problem surfaces due to the fact that in case of back-to-back + * SETUP packets there will be no XferNotReady(DATA) generated and we + * will be stuck waiting for XferNotReady(DATA) forever. + * + * By looking at tables 9-13 and 9-14 of the Databook, we can see that + * it tells us to start Data Phase right away. It also mentions that if + * we receive a SETUP phase instead of the DATA phase, core will issue + * XferComplete for the DATA phase, before actually initiating it in + * the wire, with the TRB's status set to "SETUP_PENDING". Such status + * can only be used to print some debugging logs, as the core expects + * us to go through to the STATUS phase and start a CONTROL_STATUS TRB, + * just so it completes right away, without transferring anything and, + * only then, we can go back to the SETUP phase. + * + * Because of this scenario, SNPS decided to change the programming + * model of control transfers and support on-demand transfers only for + * the STATUS phase. To fix the issue we have now, we will always wait + * for gadget driver to queue the DATA phase's struct usb_request, then + * start it right away. + * + * If we're actually in a 2-stage transfer, we will wait for + * XferNotReady(STATUS). + */ + if (dwc->three_stage_setup) { + unsigned direction; + + direction = dwc->ep0_expect_in; + dwc->ep0state = EP0_DATA_PHASE; + + __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); + + dep->flags &= ~DWC3_EP0_DIR_IN; + } + + return 0; } int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, @@ -207,9 +262,14 @@ out: static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) { - struct dwc3_ep *dep = dwc->eps[0]; + struct dwc3_ep *dep; + + /* reinitialize physical ep1 */ + dep = dwc->eps[1]; + dep->flags = DWC3_EP_ENABLED; /* stall is always issued on EP0 */ + dep = dwc->eps[0]; __dwc3_gadget_ep_set_halt(dep, 1); dep->flags = DWC3_EP_ENABLED; dwc->delayed_status = false; @@ -698,6 +758,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, struct dwc3_trb *trb; struct dwc3_ep *ep0; u32 transferred; + u32 status; u32 length; u8 epnum; @@ -710,6 +771,17 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, ur = &r->request; trb = dwc->ep0_trb; + + status = DWC3_TRB_SIZE_TRBSTS(trb->size); + if (status == DWC3_TRBSTS_SETUP_PENDING) { + dev_dbg(dwc->dev, "Setup Pending received\n"); + + if (r) + dwc3_gadget_giveback(ep0, r, -ECONNRESET); + + return; + } + length = trb->size & DWC3_TRB_SIZE_MASK; if (dwc->ep0_bounced) { @@ -720,7 +792,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, transferred = min_t(u32, ur->length, transfer_size - length); memcpy(ur->buf, dwc->ep0_bounce, transferred); - dwc->ep0_bounced = false; } else { transferred = ur->length - length; } @@ -746,8 +817,11 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, { struct dwc3_request *r; struct dwc3_ep *dep; + struct dwc3_trb *trb; + u32 status; dep = dwc->eps[0]; + trb = dwc->ep0_trb; if (!list_empty(&dep->request_list)) { r = next_request(&dep->request_list); @@ -767,6 +841,10 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, } } + status = DWC3_TRB_SIZE_TRBSTS(trb->size); + if (status == DWC3_TRBSTS_SETUP_PENDING) + dev_dbg(dwc->dev, "Setup Pending received\n"); + dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); } @@ -800,12 +878,6 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, } } -static void dwc3_ep0_do_control_setup(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) -{ - dwc3_ep0_out_start(dwc); -} - static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req) { @@ -858,29 +930,6 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, WARN_ON(ret < 0); } -static void dwc3_ep0_do_control_data(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) -{ - struct dwc3_ep *dep; - struct dwc3_request *req; - - dep = dwc->eps[0]; - - if (list_empty(&dep->request_list)) { - dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n"); - dep->flags |= DWC3_EP_PENDING_REQUEST; - - if (event->endpoint_number) - dep->flags |= DWC3_EP0_DIR_IN; - return; - } - - req = next_request(&dep->request_list); - dep = dwc->eps[event->endpoint_number]; - - __dwc3_ep0_do_control_data(dwc, dep, req); -} - static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; @@ -912,100 +961,61 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc, __dwc3_ep0_do_control_status(dwc, dep); } -static void dwc3_ep0_xfernotready(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) +static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) { - dwc->setup_packet_pending = true; - - /* - * This part is very tricky: If we have just handled - * XferNotReady(Setup) and we're now expecting a - * XferComplete but, instead, we receive another - * XferNotReady(Setup), we should STALL and restart - * the state machine. - * - * In all other cases, we just continue waiting - * for the XferComplete event. - * - * We are a little bit unsafe here because we're - * not trying to ensure that last event was, indeed, - * XferNotReady(Setup). - * - * Still, we don't expect any condition where that - * should happen and, even if it does, it would be - * another error condition. - */ - if (dwc->ep0_next_event == DWC3_EP0_COMPLETE) { - switch (event->status) { - case DEPEVT_STATUS_CONTROL_SETUP: - dev_vdbg(dwc->dev, "Unexpected XferNotReady(Setup)\n"); - dwc3_ep0_stall_and_restart(dwc); - break; - case DEPEVT_STATUS_CONTROL_DATA: - /* FALLTHROUGH */ - case DEPEVT_STATUS_CONTROL_STATUS: - /* FALLTHROUGH */ - default: - dev_vdbg(dwc->dev, "waiting for XferComplete\n"); - } + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + int ret; + if (!dep->resource_index) return; - } - - switch (event->status) { - case DEPEVT_STATUS_CONTROL_SETUP: - dev_vdbg(dwc->dev, "Control Setup\n"); - dwc->ep0state = EP0_SETUP_PHASE; + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= DWC3_DEPCMD_CMDIOC; + cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + WARN_ON_ONCE(ret); + dep->resource_index = 0; +} - dwc3_ep0_do_control_setup(dwc, event); - break; +static void dwc3_ep0_xfernotready(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + dwc->setup_packet_pending = true; + switch (event->status) { case DEPEVT_STATUS_CONTROL_DATA: dev_vdbg(dwc->dev, "Control Data\n"); - dwc->ep0state = EP0_DATA_PHASE; - - if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) { - dev_vdbg(dwc->dev, "Expected %d got %d\n", - dwc->ep0_next_event, - DWC3_EP0_NRDY_DATA); - - dwc3_ep0_stall_and_restart(dwc); - return; - } - /* - * One of the possible error cases is when Host _does_ - * request for Data Phase, but it does so on the wrong - * direction. + * We already have a DATA transfer in the controller's cache, + * if we receive a XferNotReady(DATA) we will ignore it, unless + * it's for the wrong direction. * - * Here, we already know ep0_next_event is DATA (see above), - * so we only need to check for direction. + * In that case, we must issue END_TRANSFER command to the Data + * Phase we already have started and issue SetStall on the + * control endpoint. */ if (dwc->ep0_expect_in != event->endpoint_number) { + struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in]; + dev_vdbg(dwc->dev, "Wrong direction for Data phase\n"); + dwc3_ep0_end_control_data(dwc, dep); dwc3_ep0_stall_and_restart(dwc); return; } - dwc3_ep0_do_control_data(dwc, event); break; case DEPEVT_STATUS_CONTROL_STATUS: + if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) + return; + dev_vdbg(dwc->dev, "Control Status\n"); dwc->ep0state = EP0_STATUS_PHASE; - if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) { - dev_vdbg(dwc->dev, "Expected %d got %d\n", - dwc->ep0_next_event, - DWC3_EP0_NRDY_STATUS); - - dwc3_ep0_stall_and_restart(dwc); - return; - } - if (dwc->delayed_status) { WARN_ON_ONCE(event->endpoint_number != 1); dev_vdbg(dwc->dev, "Mass Storage delayed status\n"); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 58fdfad96b4d..c9e729a4bf65 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -263,8 +263,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - usb_gadget_unmap_request(&dwc->gadget, &req->request, - req->direction); + if (dwc->ep0_bounced && dep->number == 0) + dwc->ep0_bounced = false; + else + usb_gadget_unmap_request(&dwc->gadget, &req->request, + req->direction); dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, @@ -431,15 +434,25 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, - const struct usb_ss_ep_comp_descriptor *comp_desc) + const struct usb_ss_ep_comp_descriptor *comp_desc, + bool ignore) { struct dwc3_gadget_ep_cmd_params params; memset(¶ms, 0x00, sizeof(params)); params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc)) - | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)) - | DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst - 1); + | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)); + + /* Burst size is only needed in SuperSpeed mode */ + if (dwc->gadget.speed == USB_SPEED_SUPER) { + u32 burst = dep->endpoint.maxburst - 1; + + params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst); + } + + if (ignore) + params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM; params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_XFER_NOT_READY_EN; @@ -498,7 +511,8 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) */ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, - const struct usb_ss_ep_comp_descriptor *comp_desc) + const struct usb_ss_ep_comp_descriptor *comp_desc, + bool ignore) { struct dwc3 *dwc = dep->dwc; u32 reg; @@ -510,7 +524,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc); + ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore); if (ret) return ret; @@ -558,27 +572,7 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) if (!list_empty(&dep->req_queued)) { dwc3_stop_active_transfer(dwc, dep->number); - /* - * NOTICE: We are violating what the Databook says about the - * EndTransfer command. Ideally we would _always_ wait for the - * EndTransfer Command Completion IRQ, but that's causing too - * much trouble synchronizing between us and gadget driver. - * - * We have discussed this with the IP Provider and it was - * suggested to giveback all requests here, but give HW some - * extra time to synchronize with the interconnect. We're using - * an arbitraty 100us delay for that. - * - * Note also that a similar handling was tested by Synopsys - * (thanks a lot Paul) and nothing bad has come out of it. - * In short, what we're doing is: - * - * - Issue EndTransfer WITH CMDIOC bit set - * - Wait 100us - * - giveback all requests to gadget driver - */ - udelay(100); - + /* - giveback all requests to gadget driver */ while (!list_empty(&dep->req_queued)) { req = next_request(&dep->req_queued); @@ -657,6 +651,12 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, dep = to_dwc3_ep(ep); dwc = dep->dwc; + if (dep->flags & DWC3_EP_ENABLED) { + dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", + dep->name); + return 0; + } + switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: strlcat(dep->name, "-control", sizeof(dep->name)); @@ -674,16 +674,10 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, dev_err(dwc->dev, "invalid endpoint transfer type\n"); } - if (dep->flags & DWC3_EP_ENABLED) { - dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", - dep->name); - return 0; - } - dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc); + ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1026,6 +1020,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, if (list_empty(&dep->request_list)) { dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", dep->name); + dep->flags |= DWC3_EP_PENDING_REQUEST; return; } @@ -1089,13 +1084,21 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if (dep->flags & DWC3_EP_PENDING_REQUEST) { int ret; - ret = __dwc3_gadget_kick_transfer(dep, 0, true); - if (ret && ret != -EBUSY) { - struct dwc3 *dwc = dep->dwc; + /* + * If xfernotready is already elapsed and it is a case + * of isoc transfer, then issue END TRANSFER, so that + * you can receive xfernotready again and can have + * notion of current microframe. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { + dwc3_stop_active_transfer(dwc, dep->number); + return 0; + } + ret = __dwc3_gadget_kick_transfer(dep, 0, true); + if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); - } } /* @@ -1104,16 +1107,14 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * core may not see the modified TRB(s). */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_BUSY)) { + (dep->flags & DWC3_EP_BUSY) && + !(dep->flags & DWC3_EP_MISSED_ISOC)) { WARN_ON_ONCE(!dep->resource_index); ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index, false); - if (ret && ret != -EBUSY) { - struct dwc3 *dwc = dep->dwc; - + if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); - } } /* @@ -1518,14 +1519,14 @@ static int dwc3_gadget_start(struct usb_gadget *g, dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err0; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err1; @@ -1750,7 +1751,7 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, int i; for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { - struct dwc3_ep *dep = dwc->eps[i]; + dep = dwc->eps[i]; if (!(dep->flags & DWC3_EP_ENABLED)) continue; @@ -1877,6 +1878,25 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) if (!dep->resource_index) return; + /* + * NOTICE: We are violating what the Databook says about the + * EndTransfer command. Ideally we would _always_ wait for the + * EndTransfer Command Completion IRQ, but that's causing too + * much trouble synchronizing between us and gadget driver. + * + * We have discussed this with the IP Provider and it was + * suggested to giveback all requests here, but give HW some + * extra time to synchronize with the interconnect. We're using + * an arbitraty 100us delay for that. + * + * Note also that a similar handling was tested by Synopsys + * (thanks a lot Paul) and nothing bad has come out of it. + * In short, what we're doing is: + * + * - Issue EndTransfer WITH CMDIOC bit set + * - Wait 100us + */ + cmd = DWC3_DEPCMD_ENDTRANSFER; cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); @@ -1884,6 +1904,8 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; + + udelay(100); } static void dwc3_stop_active_transfers(struct dwc3 *dwc) @@ -2141,14 +2163,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index ee0ebacf8227..e426ad626d74 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -450,7 +450,7 @@ static int dbgp_ehci_startup(void) writel(FLAG_CF, &ehci_regs->configured_flag); /* Wait until the controller is no longer halted */ - loop = 10; + loop = 1000; do { status = readl(&ehci_regs->status); if (!(status & STS_HALT)) @@ -491,7 +491,7 @@ static int ehci_wait_for_port(int port); * Return -ENODEV for any general failure * Return -EIO if wait for port fails */ -int dbgp_external_startup(void) +static int _dbgp_external_startup(void) { int devnum; struct usb_debug_descriptor dbgp_desc; @@ -613,6 +613,11 @@ err: goto try_again; return -ENODEV; } + +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} EXPORT_SYMBOL_GPL(dbgp_external_startup); static int ehci_reset_port(int port) @@ -804,7 +809,7 @@ try_next_port: dbgp_ehci_status("ehci skip - already configured"); } - ret = dbgp_external_startup(); + ret = _dbgp_external_startup(); if (ret == -EIO) goto next_debug_port; @@ -934,7 +939,7 @@ static void early_dbgp_write(struct console *con, const char *str, u32 n) ctrl = readl(&ehci_debug->control); if (!(ctrl & DBGP_ENABLED)) { dbgp_not_safe = 1; - dbgp_external_startup(); + _dbgp_external_startup(); } else { cmd |= CMD_RUN; writel(cmd, &ehci_regs->command); @@ -974,10 +979,14 @@ struct console early_dbgp_console = { .index = -1, }; -int dbgp_reset_prep(void) +int dbgp_reset_prep(struct usb_hcd *hcd) { + int ret = xen_dbgp_reset_prep(hcd); u32 ctrl; + if (ret) + return ret; + dbgp_not_safe = 1; if (!ehci_debug) return 0; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 51ab5fd5d468..dfb51a45496c 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -154,16 +154,25 @@ config USB_LPC32XX config USB_ATMEL_USBA tristate "Atmel USBA" - select USB_GADGET_DUALSPEED depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. +config USB_BCM63XX_UDC + tristate "Broadcom BCM63xx Peripheral Controller" + depends on BCM63XX + help + Many Broadcom BCM63xx chipsets (such as the BCM6328) have a + high speed USB Device Port with support for four fixed endpoints + (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "bcm63xx_udc". + config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC - select USB_GADGET_DUALSPEED select USB_FSL_MPH_DR_OF if OF help Some of Freescale PowerPC and i.MX processors have a High Speed @@ -179,7 +188,6 @@ config USB_FSL_USB2 config USB_FUSB300 tristate "Faraday FUSB300 USB Peripheral Controller" depends on !PHYS_ADDR_T_64BIT - select USB_GADGET_DUALSPEED help Faraday usb device controller FUSB300 driver @@ -227,7 +235,6 @@ config USB_PXA25X_SMALL config USB_R8A66597 tristate "Renesas R8A66597 USB Peripheral Controller" - select USB_GADGET_DUALSPEED help R8A66597 is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -240,7 +247,6 @@ config USB_R8A66597 config USB_RENESAS_USBHS_UDC tristate 'Renesas USBHS controller' depends on USB_RENESAS_USBHS - select USB_GADGET_DUALSPEED help Renesas USBHS is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -268,7 +274,6 @@ config USB_PXA27X config USB_S3C_HSOTG tristate "S3C HS/OtG USB Device controller" depends on S3C_DEV_USB_HSOTG - select USB_GADGET_DUALSPEED help The Samsung S3C64XX USB2.0 high-speed gadget controller integrated into the S3C64XX series SoC. @@ -305,7 +310,6 @@ config USB_S3C2410_DEBUG config USB_S3C_HSUDC tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" depends on ARCH_S3C24XX - select USB_GADGET_DUALSPEED help Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC integrated with dual speed USB 2.0 device controller. It has @@ -315,7 +319,6 @@ config USB_S3C_HSUDC config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" - select USB_GADGET_DUALSPEED help Marvell Socs (including PXA and MMP series) include a high speed USB2.0 OTG controller, which can be configured as high speed or @@ -338,14 +341,12 @@ config USB_MV_U3D config USB_GADGET_MUSB_HDRC tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)" depends on USB_MUSB_HDRC - select USB_GADGET_DUALSPEED help This OTG-capable silicon IP is used in dual designs including the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin config USB_M66592 tristate "Renesas M66592 USB Peripheral Controller" - select USB_GADGET_DUALSPEED help M66592 is a discrete USB peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -362,7 +363,6 @@ config USB_M66592 config USB_AMD5536UDC tristate "AMD5536 UDC" depends on PCI - select USB_GADGET_DUALSPEED help The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. It is a USB Highspeed DMA capable USB device controller. Beside ep0 @@ -389,7 +389,6 @@ config USB_FSL_QE config USB_NET2272 tristate "PLX NET2272" - select USB_GADGET_DUALSPEED help PLX NET2272 is a USB peripheral controller which supports both full and high speed USB 2.0 data transfers. @@ -413,7 +412,6 @@ config USB_NET2272_DMA config USB_NET2280 tristate "NetChip 228x" depends on PCI - select USB_GADGET_DUALSPEED help NetChip 2280 / 2282 is a PCI based USB peripheral controller which supports both full and high speed USB 2.0 data transfers. @@ -443,7 +441,6 @@ config USB_GOKU config USB_EG20T tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI - select USB_GADGET_DUALSPEED help This is a USB device driver for EG20T PCH. EG20T PCH is the platform controller hub that is used in Intel's @@ -470,8 +467,6 @@ config USB_EG20T config USB_DUMMY_HCD tristate "Dummy HCD (DEVELOPMENT)" depends on USB=y || (USB=m && USB_GADGET=m) - select USB_GADGET_DUALSPEED - select USB_GADGET_SUPERSPEED help This host controller driver emulates USB, looping all data transfer requests back to a USB "gadget driver" in the same host. The host @@ -496,18 +491,15 @@ config USB_DUMMY_HCD endmenu -# Selected by UDC drivers that support high-speed operation. -config USB_GADGET_DUALSPEED - bool - -# Selected by UDC drivers that support super-speed opperation -config USB_GADGET_SUPERSPEED - bool - depends on USB_GADGET_DUALSPEED - # # USB Gadget Drivers # + +# composite based drivers +config USB_LIBCOMPOSITE + tristate + depends on USB_GADGET + choice tristate "USB Gadget Drivers" default USB_ETH @@ -531,6 +523,7 @@ choice config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" + select USB_LIBCOMPOSITE help Gadget Zero is a two-configuration device. It either sinks and sources bulk data; or it loops back a configurable number of @@ -564,8 +557,9 @@ config USB_ZERO_HNPTEST one serve as the USB host instead (in the "B-Host" role). config USB_AUDIO - tristate "Audio Gadget (EXPERIMENTAL)" + tristate "Audio Gadget" depends on SND + select USB_LIBCOMPOSITE select SND_PCM help This Gadget Audio driver is compatible with USB Audio Class @@ -594,6 +588,7 @@ config GADGET_UAC1 config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" depends on NET + select USB_LIBCOMPOSITE select CRC32 help This driver implements Ethernet style communication, in one of @@ -629,6 +624,7 @@ config USB_ETH config USB_ETH_RNDIS bool "RNDIS support" depends on USB_ETH + select USB_LIBCOMPOSITE default y help Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, @@ -647,6 +643,7 @@ config USB_ETH_RNDIS config USB_ETH_EEM bool "Ethernet Emulation Model (EEM) support" depends on USB_ETH + select USB_LIBCOMPOSITE default n help CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM @@ -663,6 +660,7 @@ config USB_ETH_EEM config USB_G_NCM tristate "Network Control Model (NCM) support" depends on NET + select USB_LIBCOMPOSITE select CRC32 help This driver implements USB CDC NCM subclass standard. NCM is @@ -674,8 +672,7 @@ config USB_G_NCM dynamically linked module called "g_ncm". config USB_GADGETFS - tristate "Gadget Filesystem (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Gadget Filesystem" help This driver provides a filesystem based API that lets user mode programs implement a single-configuration USB device, including @@ -683,15 +680,12 @@ config USB_GADGETFS All endpoints, transfer speeds, and transfer types supported by the hardware are available, through read() and write() calls. - Currently, this option is still labelled as EXPERIMENTAL because - of existing race conditions in the underlying in-kernel AIO core. - Say "y" to link the driver statically, or "m" to build a dynamically linked module called "gadgetfs". config USB_FUNCTIONFS - tristate "Function Filesystem (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Function Filesystem" + select USB_LIBCOMPOSITE select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) help The Function Filesystem (FunctionFS) lets one create USB @@ -755,6 +749,7 @@ config USB_FILE_STORAGE_TEST config USB_MASS_STORAGE tristate "Mass Storage Gadget" depends on BLOCK + select USB_LIBCOMPOSITE help The Mass Storage Gadget acts as a USB Mass Storage disk drive. As its storage repository it can use a regular file or a block @@ -770,6 +765,7 @@ config USB_MASS_STORAGE config USB_GADGET_TARGET tristate "USB Gadget Target Fabric Module" depends on TARGET_CORE + select USB_LIBCOMPOSITE help This fabric is an USB gadget. Two USB protocols are supported that is BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is @@ -779,6 +775,7 @@ config USB_GADGET_TARGET config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. This driver supports a CDC-ACM module option, which can be used @@ -797,8 +794,9 @@ config USB_G_SERIAL make MS-Windows work with CDC ACM. config USB_MIDI_GADGET - tristate "MIDI Gadget (EXPERIMENTAL)" - depends on SND && EXPERIMENTAL + tristate "MIDI Gadget" + depends on SND + select USB_LIBCOMPOSITE select SND_RAWMIDI help The MIDI Gadget acts as a USB Audio device, with one MIDI @@ -812,6 +810,7 @@ config USB_MIDI_GADGET config USB_G_PRINTER tristate "Printer Gadget" + select USB_LIBCOMPOSITE help The Printer Gadget channels data between the USB host and a userspace program driving the print engine. The user space @@ -828,6 +827,7 @@ config USB_G_PRINTER config USB_CDC_COMPOSITE tristate "CDC Composite Device (Ethernet and ACM)" depends on NET + select USB_LIBCOMPOSITE help This driver provides two functions in one configuration: a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. @@ -842,6 +842,7 @@ config USB_CDC_COMPOSITE config USB_G_NOKIA tristate "Nokia composite gadget" depends on PHONET + select USB_LIBCOMPOSITE help The Nokia composite gadget provides support for acm, obex and phonet in only one composite gadget driver. @@ -852,6 +853,7 @@ config USB_G_NOKIA config USB_G_ACM_MS tristate "CDC Composite Device (ACM and mass storage)" depends on BLOCK + select USB_LIBCOMPOSITE help This driver provides two functions in one configuration: a mass storage, and a CDC ACM (serial port) link. @@ -860,9 +862,10 @@ config USB_G_ACM_MS dynamically linked module called "g_acm_ms". config USB_G_MULTI - tristate "Multifunction Composite Gadget (EXPERIMENTAL)" + tristate "Multifunction Composite Gadget" depends on BLOCK && NET select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS + select USB_LIBCOMPOSITE help The Multifunction Composite Gadget provides Ethernet (RNDIS and/or CDC Ethernet), mass storage and ACM serial link @@ -903,6 +906,7 @@ config USB_G_MULTI_CDC config USB_G_HID tristate "HID Gadget" + select USB_LIBCOMPOSITE help The HID gadget driver provides generic emulation of USB Human Interface Devices (HID). @@ -913,8 +917,10 @@ config USB_G_HID Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_hid". +# Standalone / single function gadgets config USB_G_DBGP tristate "EHCI Debug Device Gadget" + select USB_LIBCOMPOSITE help This gadget emulates an EHCI Debug device. This is useful when you want to interact with an EHCI Debug Port. diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 3fd8cd09d2c1..307be5fa824c 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -4,6 +4,9 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG obj-$(CONFIG_USB_GADGET) += udc-core.o +obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o +libcomposite-y := usbstring.o config.o epautoconf.o +libcomposite-y += composite.o obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2272) += net2272.o obj-$(CONFIG_USB_NET2280) += net2280.o @@ -16,6 +19,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o +obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o fsl_usb2_udc-y := fsl_udc_core.o fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c index 75b8a691fd00..5a7f289805ff 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/acm_ms.c @@ -15,7 +15,7 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> +#include <linux/module.h> #include "u_serial.h" @@ -41,15 +41,12 @@ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "u_serial.c" #include "f_acm.c" #include "f_mass_storage.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -89,17 +86,11 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; - /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -157,7 +148,6 @@ static struct usb_configuration acm_ms_config_driver = { static int __init acm_ms_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; void *retp; @@ -174,44 +164,22 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) goto fail0; } - /* set bcdDevice */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - } else { - WARNING(cdev, "controller '%s' not recognized; trying %s\n", - gadget->name, - acm_ms_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - /* * Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail1; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail1; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config); if (status < 0) goto fail1; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); fsg_common_put(&fsg_common); @@ -232,11 +200,12 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver acm_ms_driver = { +static __refdata struct usb_composite_driver acm_ms_driver = { .name = "g_acm_ms", .dev = &device_desc, .max_speed = USB_SPEED_SUPER, .strings = dev_strings, + .bind = acm_ms_bind, .unbind = __exit_p(acm_ms_unbind), }; @@ -246,7 +215,7 @@ MODULE_LICENSE("GPL v2"); static int __init init(void) { - return usb_composite_probe(&acm_ms_driver, acm_ms_bind); + return usb_composite_probe(&acm_ms_driver); } module_init(init); diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 187d21181cd5..fc0ec5e0d58e 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1401,7 +1401,7 @@ static int udc_wakeup(struct usb_gadget *gadget) } static int amd5536_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int amd5536_stop(struct usb_gadget_driver *driver); /* gadget operations */ static const struct usb_gadget_ops udc_ops = { @@ -1914,7 +1914,7 @@ static int setup_ep0(struct udc *dev) /* Called by gadget driver to register itself */ static int amd5536_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct udc *dev = udc; int retval; @@ -1932,7 +1932,7 @@ static int amd5536_start(struct usb_gadget_driver *driver, dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); /* Some gadget drivers use both ep0 directions. * NOTE: to gadget driver, ep0 is just one endpoint... diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index c9e66dfb02e6..89d90b5fb787 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -469,14 +469,13 @@ static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); - struct at91_udc *udc = ep->udc; + struct at91_udc *udc; u16 maxpacket; u32 tmp; unsigned long flags; if (!_ep || !ep - || !desc || ep->ep.desc - || _ep->name == ep0name + || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || (maxpacket = usb_endpoint_maxp(desc)) == 0 || maxpacket > ep->maxpacket) { @@ -484,6 +483,7 @@ static int at91_ep_enable(struct usb_ep *_ep, return -EINVAL; } + udc = ep->udc; if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { DBG("bogus device state\n"); return -ESHUTDOWN; @@ -530,7 +530,6 @@ ok: tmp |= AT91_UDP_EPEDS; __raw_writel(tmp, ep->creg); - ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; /* @@ -1635,7 +1634,6 @@ static int at91_start(struct usb_gadget *gadget, udc->driver = driver; udc->gadget.dev.driver = &driver->driver; udc->gadget.dev.of_node = udc->pdev->dev.of_node; - dev_set_drvdata(&udc->gadget.dev, &driver->driver); udc->enabled = 1; udc->selfpowered = 1; @@ -1656,7 +1654,6 @@ static int at91_stop(struct usb_gadget *gadget, spin_unlock_irqrestore(&udc->lock, flags); udc->gadget.dev.driver = NULL; - dev_set_drvdata(&udc->gadget.dev, NULL); udc->driver = NULL; DBG("unbound from %s\n", driver->driver.name); @@ -1703,7 +1700,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) int retval; struct resource *res; - if (!dev->platform_data) { + if (!dev->platform_data && !pdev->dev.of_node) { /* small (so we copy it) but critical! */ DBG("missing platform_data\n"); return -ENODEV; diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 98899244860e..231b0efe8fdc 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -12,35 +12,21 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> +#include <linux/module.h> +#include <linux/usb/composite.h> +#include "gadget_chips.h" #define DRIVER_DESC "Linux USB Audio Gadget" #define DRIVER_VERSION "Feb 2, 2012" -/*-------------------------------------------------------------------------*/ - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" +USB_GADGET_COMPOSITE_OPTIONS(); /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -149,39 +135,18 @@ static struct usb_configuration audio_config_driver = { static int __init audio_bind(struct usb_composite_dev *cdev) { - int gcnum; int status; - gcnum = usb_gadget_controller_number(cdev->gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - ERROR(cdev, "controller '%s' not recognized; trying %s\n", - cdev->gadget->name, - audio_config_driver.label); - device_desc.bcdDevice = - __constant_cpu_to_le16(0x0300 | 0x0099); - } - - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - cdev->gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; status = usb_add_config(cdev, &audio_config_driver, audio_do_config); if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION); return 0; @@ -198,17 +163,18 @@ static int __exit audio_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver audio_driver = { +static __refdata struct usb_composite_driver audio_driver = { .name = "g_audio", .dev = &device_desc, .strings = audio_strings, .max_speed = USB_SPEED_HIGH, + .bind = audio_bind, .unbind = __exit_p(audio_unbind), }; static int __init init(void) { - return usb_composite_probe(&audio_driver, audio_bind); + return usb_composite_probe(&audio_driver); } module_init(init); diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c new file mode 100644 index 000000000000..9ca792224cd4 --- /dev/null +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -0,0 +1,2464 @@ +/* + * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller + * + * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com> + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/bug.h> +#include <linux/clk.h> +#include <linux/compiler.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kconfig.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/workqueue.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_iudma.h> +#include <bcm63xx_dev_usb_usbd.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +#define DRV_MODULE_NAME "bcm63xx_udc" + +static const char bcm63xx_ep0name[] = "ep0"; +static const char *const bcm63xx_ep_name[] = { + bcm63xx_ep0name, + "ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int", +}; + +static bool use_fullspeed; +module_param(use_fullspeed, bool, S_IRUGO); +MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); + +/* + * RX IRQ coalescing options: + * + * false (default) - one IRQ per DATAx packet. Slow but reliable. The + * driver is able to pass the "testusb" suite and recover from conditions like: + * + * 1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep + * 2) Host sends 512 bytes of data + * 3) Host decides to reconfigure the device and sends SET_INTERFACE + * 4) Device shuts down the endpoint and cancels the RX transaction + * + * true - one IRQ per transfer, for transfers <= 2048B. Generates + * considerably fewer IRQs, but error recovery is less robust. Does not + * reliably pass "testusb". + * + * TX always uses coalescing, because we can cancel partially complete TX + * transfers by repeatedly flushing the FIFO. The hardware doesn't allow + * this on RX. + */ +static bool irq_coalesce; +module_param(irq_coalesce, bool, S_IRUGO); +MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer"); + +#define BCM63XX_NUM_EP 5 +#define BCM63XX_NUM_IUDMA 6 +#define BCM63XX_NUM_FIFO_PAIRS 3 + +#define IUDMA_RESET_TIMEOUT_US 10000 + +#define IUDMA_EP0_RXCHAN 0 +#define IUDMA_EP0_TXCHAN 1 + +#define IUDMA_MAX_FRAGMENT 2048 +#define BCM63XX_MAX_CTRL_PKT 64 + +#define BCMEP_CTRL 0x00 +#define BCMEP_ISOC 0x01 +#define BCMEP_BULK 0x02 +#define BCMEP_INTR 0x03 + +#define BCMEP_OUT 0x00 +#define BCMEP_IN 0x01 + +#define BCM63XX_SPD_FULL 1 +#define BCM63XX_SPD_HIGH 0 + +#define IUDMA_DMAC_OFFSET 0x200 +#define IUDMA_DMAS_OFFSET 0x400 + +enum bcm63xx_ep0_state { + EP0_REQUEUE, + EP0_IDLE, + EP0_IN_DATA_PHASE_SETUP, + EP0_IN_DATA_PHASE_COMPLETE, + EP0_OUT_DATA_PHASE_SETUP, + EP0_OUT_DATA_PHASE_COMPLETE, + EP0_OUT_STATUS_PHASE, + EP0_IN_FAKE_STATUS_PHASE, + EP0_SHUTDOWN, +}; + +static const char __maybe_unused bcm63xx_ep0_state_names[][32] = { + "REQUEUE", + "IDLE", + "IN_DATA_PHASE_SETUP", + "IN_DATA_PHASE_COMPLETE", + "OUT_DATA_PHASE_SETUP", + "OUT_DATA_PHASE_COMPLETE", + "OUT_STATUS_PHASE", + "IN_FAKE_STATUS_PHASE", + "SHUTDOWN", +}; + +/** + * struct iudma_ch_cfg - Static configuration for an IUDMA channel. + * @ep_num: USB endpoint number. + * @n_bds: Number of buffer descriptors in the ring. + * @ep_type: Endpoint type (control, bulk, interrupt). + * @dir: Direction (in, out). + * @n_fifo_slots: Number of FIFO entries to allocate for this channel. + * @max_pkt_hs: Maximum packet size in high speed mode. + * @max_pkt_fs: Maximum packet size in full speed mode. + */ +struct iudma_ch_cfg { + int ep_num; + int n_bds; + int ep_type; + int dir; + int n_fifo_slots; + int max_pkt_hs; + int max_pkt_fs; +}; + +static const struct iudma_ch_cfg iudma_defaults[] = { + + /* This controller was designed to support a CDC/RNDIS application. + It may be possible to reconfigure some of the endpoints, but + the hardware limitations (FIFO sizing and number of DMA channels) + may significantly impact flexibility and/or stability. Change + these values at your own risk. + + ep_num ep_type n_fifo_slots max_pkt_fs + idx | n_bds | dir | max_pkt_hs | + | | | | | | | | */ + [0] = { -1, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [1] = { 0, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [2] = { 2, 16, BCMEP_BULK, BCMEP_OUT, 128, 512, 64 }, + [3] = { 1, 16, BCMEP_BULK, BCMEP_IN, 128, 512, 64 }, + [4] = { 4, 4, BCMEP_INTR, BCMEP_OUT, 32, 64, 64 }, + [5] = { 3, 4, BCMEP_INTR, BCMEP_IN, 32, 64, 64 }, +}; + +struct bcm63xx_udc; + +/** + * struct iudma_ch - Represents the current state of a single IUDMA channel. + * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1). + * @ep_num: USB endpoint number. -1 for ep0 RX. + * @enabled: Whether bcm63xx_ep_enable() has been called. + * @max_pkt: "Chunk size" on the USB interface. Based on interface speed. + * @is_tx: true for TX, false for RX. + * @bep: Pointer to the associated endpoint. NULL for ep0 RX. + * @udc: Reference to the device controller. + * @read_bd: Next buffer descriptor to reap from the hardware. + * @write_bd: Next BD available for a new packet. + * @end_bd: Points to the final BD in the ring. + * @n_bds_used: Number of BD entries currently occupied. + * @bd_ring: Base pointer to the BD ring. + * @bd_ring_dma: Physical (DMA) address of bd_ring. + * @n_bds: Total number of BDs in the ring. + * + * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is + * bidirectional. The "struct usb_ep" associated with ep0 is for TX (IN) + * only. + * + * Each bulk/intr endpoint has a single IUDMA channel and a single + * struct usb_ep. + */ +struct iudma_ch { + unsigned int ch_idx; + int ep_num; + bool enabled; + int max_pkt; + bool is_tx; + struct bcm63xx_ep *bep; + struct bcm63xx_udc *udc; + + struct bcm_enet_desc *read_bd; + struct bcm_enet_desc *write_bd; + struct bcm_enet_desc *end_bd; + int n_bds_used; + + struct bcm_enet_desc *bd_ring; + dma_addr_t bd_ring_dma; + unsigned int n_bds; +}; + +/** + * struct bcm63xx_ep - Internal (driver) state of a single endpoint. + * @ep_num: USB endpoint number. + * @iudma: Pointer to IUDMA channel state. + * @ep: USB gadget layer representation of the EP. + * @udc: Reference to the device controller. + * @queue: Linked list of outstanding requests for this EP. + * @halted: 1 if the EP is stalled; 0 otherwise. + */ +struct bcm63xx_ep { + unsigned int ep_num; + struct iudma_ch *iudma; + struct usb_ep ep; + struct bcm63xx_udc *udc; + struct list_head queue; + unsigned halted:1; +}; + +/** + * struct bcm63xx_req - Internal (driver) state of a single request. + * @queue: Links back to the EP's request list. + * @req: USB gadget layer representation of the request. + * @offset: Current byte offset into the data buffer (next byte to queue). + * @bd_bytes: Number of data bytes in outstanding BD entries. + * @iudma: IUDMA channel used for the request. + */ +struct bcm63xx_req { + struct list_head queue; /* ep's requests */ + struct usb_request req; + unsigned int offset; + unsigned int bd_bytes; + struct iudma_ch *iudma; +}; + +/** + * struct bcm63xx_udc - Driver/hardware private context. + * @lock: Spinlock to mediate access to this struct, and (most) HW regs. + * @dev: Generic Linux device structure. + * @pd: Platform data (board/port info). + * @usbd_clk: Clock descriptor for the USB device block. + * @usbh_clk: Clock descriptor for the USB host block. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + * @usbd_regs: Base address of the USBD/USB20D block. + * @iudma_regs: Base address of the USBD's associated IUDMA block. + * @bep: Array of endpoints, including ep0. + * @iudma: Array of all IUDMA channels used by this controller. + * @cfg: USB configuration number, from SET_CONFIGURATION wValue. + * @iface: USB interface number, from SET_INTERFACE wIndex. + * @alt_iface: USB alt interface number, from SET_INTERFACE wValue. + * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions. + * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req. + * @ep0state: Current state of the ep0 state machine. + * @ep0_wq: Workqueue struct used to wake up the ep0 state machine. + * @wedgemap: Bitmap of wedged endpoints. + * @ep0_req_reset: USB reset is pending. + * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet. + * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet. + * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity. + * @ep0_req_completed: ep0 request has completed; worker has not seen it yet. + * @ep0_reply: Pending reply from gadget driver. + * @ep0_request: Outstanding ep0 request. + * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>. + * @debugfs_usbd: debugfs file "usbd" for controller state. + * @debugfs_iudma: debugfs file "usbd" for IUDMA state. + */ +struct bcm63xx_udc { + spinlock_t lock; + + struct device *dev; + struct bcm63xx_usbd_platform_data *pd; + struct clk *usbd_clk; + struct clk *usbh_clk; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + void __iomem *usbd_regs; + void __iomem *iudma_regs; + + struct bcm63xx_ep bep[BCM63XX_NUM_EP]; + struct iudma_ch iudma[BCM63XX_NUM_IUDMA]; + + int cfg; + int iface; + int alt_iface; + + struct bcm63xx_req ep0_ctrl_req; + u8 *ep0_ctrl_buf; + + int ep0state; + struct work_struct ep0_wq; + + unsigned long wedgemap; + + unsigned ep0_req_reset:1; + unsigned ep0_req_set_cfg:1; + unsigned ep0_req_set_iface:1; + unsigned ep0_req_shutdown:1; + + unsigned ep0_req_completed:1; + struct usb_request *ep0_reply; + struct usb_request *ep0_request; + + struct dentry *debugfs_root; + struct dentry *debugfs_usbd; + struct dentry *debugfs_iudma; +}; + +static const struct usb_ep_ops bcm63xx_udc_ep_ops; + +/*********************************************************************** + * Convenience functions + ***********************************************************************/ + +static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g) +{ + return container_of(g, struct bcm63xx_udc, gadget); +} + +static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct bcm63xx_ep, ep); +} + +static inline struct bcm63xx_req *our_req(struct usb_request *req) +{ + return container_of(req, struct bcm63xx_req, req); +} + +static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->usbd_regs + off); +} + +static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->usbd_regs + off); +} + +static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + off); +} + +static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + off); +} + +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); +} + +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); +} + +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); +} + +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); +} + +static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) +{ + if (is_enabled) { + clk_enable(udc->usbh_clk); + clk_enable(udc->usbd_clk); + udelay(10); + } else { + clk_disable(udc->usbd_clk); + clk_disable(udc->usbh_clk); + } +} + +/*********************************************************************** + * Low-level IUDMA / FIFO operations + ***********************************************************************/ + +/** + * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal. + * @udc: Reference to the device controller. + * @idx: Desired init_sel value. + * + * The "init_sel" signal is used as a selection index for both endpoints + * and IUDMA channels. Since these do not map 1:1, the use of this signal + * depends on the context. + */ +static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx) +{ + u32 val = usbd_readl(udc, USBD_CONTROL_REG); + + val &= ~USBD_CONTROL_INIT_SEL_MASK; + val |= idx << USBD_CONTROL_INIT_SEL_SHIFT; + usbd_writel(udc, val, USBD_CONTROL_REG); +} + +/** + * bcm63xx_set_stall - Enable/disable stall on one endpoint. + * @udc: Reference to the device controller. + * @bep: Endpoint on which to operate. + * @is_stalled: true to enable stall, false to disable. + * + * See notes in bcm63xx_update_wedge() regarding automatic clearing of + * halt/stall conditions. + */ +static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep, + bool is_stalled) +{ + u32 val; + + val = USBD_STALL_UPDATE_MASK | + (is_stalled ? USBD_STALL_ENABLE_MASK : 0) | + (bep->ep_num << USBD_STALL_EPNUM_SHIFT); + usbd_writel(udc, val, USBD_STALL_REG); +} + +/** + * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings. + * @udc: Reference to the device controller. + * + * These parameters depend on the USB link speed. Settings are + * per-IUDMA-channel-pair. + */ +static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc) +{ + int is_hs = udc->gadget.speed == USB_SPEED_HIGH; + u32 i, val, rx_fifo_slot, tx_fifo_slot; + + /* set up FIFO boundaries and packet sizes; this is done in pairs */ + rx_fifo_slot = tx_fifo_slot = 0; + for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) { + const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i]; + const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1]; + + bcm63xx_ep_dma_select(udc, i >> 1); + + val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) | + ((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) << + USBD_RXFIFO_CONFIG_END_SHIFT); + rx_fifo_slot += rx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs, + USBD_RXFIFO_EPSIZE_REG); + + val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) | + ((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) << + USBD_TXFIFO_CONFIG_END_SHIFT); + tx_fifo_slot += tx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs, + USBD_TXFIFO_EPSIZE_REG); + + usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG); + } +} + +/** + * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO. + * @udc: Reference to the device controller. + * @ep_num: Endpoint number. + */ +static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num) +{ + u32 val; + + bcm63xx_ep_dma_select(udc, ep_num); + + val = usbd_readl(udc, USBD_CONTROL_REG); + val |= USBD_CONTROL_FIFO_RESET_MASK; + usbd_writel(udc, val, USBD_CONTROL_REG); + usbd_readl(udc, USBD_CONTROL_REG); +} + +/** + * bcm63xx_fifo_reset - Flush all hardware FIFOs. + * @udc: Reference to the device controller. + */ +static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc) +{ + int i; + + for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++) + bcm63xx_fifo_reset_ep(udc, i); +} + +/** + * bcm63xx_ep_init - Initial (one-time) endpoint initialization. + * @udc: Reference to the device controller. + */ +static void bcm63xx_ep_init(struct bcm63xx_udc *udc) +{ + u32 i, val; + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + + if (cfg->ep_num < 0) + continue; + + bcm63xx_ep_dma_select(udc, cfg->ep_num); + val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) | + ((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT); + usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG); + } +} + +/** + * bcm63xx_ep_setup - Configure per-endpoint settings. + * @udc: Reference to the device controller. + * + * This needs to be rerun if the speed/cfg/intf/altintf changes. + */ +static void bcm63xx_ep_setup(struct bcm63xx_udc *udc) +{ + u32 val, i; + + usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ? + cfg->max_pkt_hs : cfg->max_pkt_fs; + int idx = cfg->ep_num; + + udc->iudma[i].max_pkt = max_pkt; + + if (idx < 0) + continue; + udc->bep[idx].ep.maxpacket = max_pkt; + + val = (idx << USBD_CSR_EP_LOG_SHIFT) | + (cfg->dir << USBD_CSR_EP_DIR_SHIFT) | + (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) | + (udc->cfg << USBD_CSR_EP_CFG_SHIFT) | + (udc->iface << USBD_CSR_EP_IFACE_SHIFT) | + (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) | + (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT); + usbd_writel(udc, val, USBD_CSR_EP_REG(idx)); + } +} + +/** + * iudma_write - Queue a single IUDMA transaction. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * @breq: Request containing the transaction data. + * + * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA + * does not honor SOP/EOP so the handling of multiple buffers is ambiguous. + * So iudma_write() may be called several times to fulfill a single + * usb_request. + * + * For TX IUDMA, this can queue multiple buffer descriptors if needed. + */ +static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, + struct bcm63xx_req *breq) +{ + int first_bd = 1, last_bd = 0, extra_zero_pkt = 0; + unsigned int bytes_left = breq->req.length - breq->offset; + const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ? + iudma->max_pkt : IUDMA_MAX_FRAGMENT; + + iudma->n_bds_used = 0; + breq->bd_bytes = 0; + breq->iudma = iudma; + + if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero) + extra_zero_pkt = 1; + + do { + struct bcm_enet_desc *d = iudma->write_bd; + u32 dmaflags = 0; + unsigned int n_bytes; + + if (d == iudma->end_bd) { + dmaflags |= DMADESC_WRAP_MASK; + iudma->write_bd = iudma->bd_ring; + } else { + iudma->write_bd++; + } + iudma->n_bds_used++; + + n_bytes = min_t(int, bytes_left, max_bd_bytes); + if (n_bytes) + dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT; + else + dmaflags |= (1 << DMADESC_LENGTH_SHIFT) | + DMADESC_USB_ZERO_MASK; + + dmaflags |= DMADESC_OWNER_MASK; + if (first_bd) { + dmaflags |= DMADESC_SOP_MASK; + first_bd = 0; + } + + /* + * extra_zero_pkt forces one more iteration through the loop + * after all data is queued up, to send the zero packet + */ + if (extra_zero_pkt && !bytes_left) + extra_zero_pkt = 0; + + if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds || + (n_bytes == bytes_left && !extra_zero_pkt)) { + last_bd = 1; + dmaflags |= DMADESC_EOP_MASK; + } + + d->address = breq->req.dma + breq->offset; + mb(); + d->len_stat = dmaflags; + + breq->offset += n_bytes; + breq->bd_bytes += n_bytes; + bytes_left -= n_bytes; + } while (!last_bd); + + usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, + ENETDMAC_CHANCFG_REG(iudma->ch_idx)); +} + +/** + * iudma_read - Check for IUDMA buffer completion. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * + * This checks to see if ALL of the outstanding BDs on the DMA channel + * have been filled. If so, it returns the actual transfer length; + * otherwise it returns -EBUSY. + */ +static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int i, actual_len = 0; + struct bcm_enet_desc *d = iudma->read_bd; + + if (!iudma->n_bds_used) + return -EINVAL; + + for (i = 0; i < iudma->n_bds_used; i++) { + u32 dmaflags; + + dmaflags = d->len_stat; + + if (dmaflags & DMADESC_OWNER_MASK) + return -EBUSY; + + actual_len += (dmaflags & DMADESC_LENGTH_MASK) >> + DMADESC_LENGTH_SHIFT; + if (d == iudma->end_bd) + d = iudma->bd_ring; + else + d++; + } + + iudma->read_bd = d; + iudma->n_bds_used = 0; + return actual_len; +} + +/** + * iudma_reset_channel - Stop DMA on a single channel. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to reset. + */ +static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int timeout = IUDMA_RESET_TIMEOUT_US; + struct bcm_enet_desc *d; + int ch_idx = iudma->ch_idx; + + if (!iudma->is_tx) + bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); + + /* stop DMA, then wait for the hardware to wrap up */ + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); + + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & + ENETDMAC_CHANCFG_EN_MASK) { + udelay(1); + + /* repeatedly flush the FIFO data until the BD completes */ + if (iudma->is_tx && iudma->ep_num >= 0) + bcm63xx_fifo_reset_ep(udc, iudma->ep_num); + + if (!timeout--) { + dev_err(udc->dev, "can't reset IUDMA channel %d\n", + ch_idx); + break; + } + if (timeout == IUDMA_RESET_TIMEOUT_US / 2) { + dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", + ch_idx); + usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, + ENETDMAC_CHANCFG_REG(ch_idx)); + } + } + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); + + /* don't leave "live" HW-owned entries for the next guy to step on */ + for (d = iudma->bd_ring; d <= iudma->end_bd; d++) + d->len_stat = 0; + mb(); + + iudma->read_bd = iudma->write_bd = iudma->bd_ring; + iudma->n_bds_used = 0; + + /* set up IRQs, UBUS burst size, and BD base for this channel */ + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IRMASK_REG(ch_idx)); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); + + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); +} + +/** + * iudma_init_channel - One-time IUDMA channel initialization. + * @udc: Reference to the device controller. + * @ch_idx: Channel to initialize. + */ +static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx) +{ + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx]; + unsigned int n_bds = cfg->n_bds; + struct bcm63xx_ep *bep = NULL; + + iudma->ep_num = cfg->ep_num; + iudma->ch_idx = ch_idx; + iudma->is_tx = !!(ch_idx & 0x01); + if (iudma->ep_num >= 0) { + bep = &udc->bep[iudma->ep_num]; + bep->iudma = iudma; + INIT_LIST_HEAD(&bep->queue); + } + + iudma->bep = bep; + iudma->udc = udc; + + /* ep0 is always active; others are controlled by the gadget driver */ + if (iudma->ep_num <= 0) + iudma->enabled = true; + + iudma->n_bds = n_bds; + iudma->bd_ring = dmam_alloc_coherent(udc->dev, + n_bds * sizeof(struct bcm_enet_desc), + &iudma->bd_ring_dma, GFP_KERNEL); + if (!iudma->bd_ring) + return -ENOMEM; + iudma->end_bd = &iudma->bd_ring[n_bds - 1]; + + return 0; +} + +/** + * iudma_init - One-time initialization of all IUDMA channels. + * @udc: Reference to the device controller. + * + * Enable DMA, flush channels, and enable global IUDMA IRQs. + */ +static int iudma_init(struct bcm63xx_udc *udc) +{ + int i, rc; + + usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + rc = iudma_init_channel(udc, i); + if (rc) + return rc; + iudma_reset_channel(udc, &udc->iudma[i]); + } + + usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG); + return 0; +} + +/** + * iudma_uninit - Uninitialize IUDMA channels. + * @udc: Reference to the device controller. + * + * Kill global IUDMA IRQs, flush channels, and kill DMA. + */ +static void iudma_uninit(struct bcm63xx_udc *udc) +{ + int i; + + usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) + iudma_reset_channel(udc, &udc->iudma[i]); + + usb_dma_writel(udc, 0, ENETDMA_CFG_REG); +} + +/*********************************************************************** + * Other low-level USBD operations + ***********************************************************************/ + +/** + * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts. + * @udc: Reference to the device controller. + * @enable_irqs: true to enable, false to disable. + */ +static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs) +{ + u32 val; + + usbd_writel(udc, 0, USBD_STATUS_REG); + + val = BIT(USBD_EVENT_IRQ_USB_RESET) | + BIT(USBD_EVENT_IRQ_SETUP) | + BIT(USBD_EVENT_IRQ_SETCFG) | + BIT(USBD_EVENT_IRQ_SETINTF) | + BIT(USBD_EVENT_IRQ_USB_LINK); + usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG); + usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG); +} + +/** + * bcm63xx_select_phy_mode - Select between USB device and host mode. + * @udc: Reference to the device controller. + * @is_device: true for device, false for host. + * + * This should probably be reworked to use the drivers/usb/otg + * infrastructure. + * + * By default, the AFE/pullups are disabled in device mode, until + * bcm63xx_select_pullup() is called. + */ +static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + if (BCMCPU_IS_6328()) { + /* configure pinmux to sense VBUS signal */ + val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG); + val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK; + val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV : + GPIO_PINMUX_OTHR_6328_USB_HOST; + bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); + } + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_device) { + val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } else { + val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); + if (is_device) + val |= USBH_PRIV_SWAP_USBD_MASK; + else + val &= ~USBH_PRIV_SWAP_USBD_MASK; + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); +} + +/** + * bcm63xx_select_pullup - Enable/disable the pullup on D+ + * @udc: Reference to the device controller. + * @is_on: true to enable the pullup, false to disable. + * + * If the pullup is active, the host will sense a FS/HS device connected to + * the port. If the pullup is inactive, the host will think the USB + * device has been disconnected. + */ +static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_on) + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + else + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); +} + +/** + * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal. + * @udc: Reference to the device controller. + * + * This just masks the IUDMA IRQs and releases the clocks. It is assumed + * that bcm63xx_udc_stop() has already run, and the clocks are stopped. + */ +static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc) +{ + set_clocks(udc, true); + iudma_uninit(udc); + set_clocks(udc, false); + + clk_put(udc->usbd_clk); + clk_put(udc->usbh_clk); +} + +/** + * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures. + * @udc: Reference to the device controller. + */ +static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc) +{ + int i, rc = 0; + u32 val; + + udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT, + GFP_KERNEL); + if (!udc->ep0_ctrl_buf) + return -ENOMEM; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + for (i = 0; i < BCM63XX_NUM_EP; i++) { + struct bcm63xx_ep *bep = &udc->bep[i]; + + bep->ep.name = bcm63xx_ep_name[i]; + bep->ep_num = i; + bep->ep.ops = &bcm63xx_udc_ep_ops; + list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list); + bep->halted = 0; + bep->ep.maxpacket = BCM63XX_MAX_CTRL_PKT; + bep->udc = udc; + bep->ep.desc = NULL; + INIT_LIST_HEAD(&bep->queue); + } + + udc->gadget.ep0 = &udc->bep[0].ep; + list_del(&udc->bep[0].ep.ep_list); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_SHUTDOWN; + + udc->usbh_clk = clk_get(udc->dev, "usbh"); + if (IS_ERR(udc->usbh_clk)) + return -EIO; + + udc->usbd_clk = clk_get(udc->dev, "usbd"); + if (IS_ERR(udc->usbd_clk)) { + clk_put(udc->usbh_clk); + return -EIO; + } + + set_clocks(udc, true); + + val = USBD_CONTROL_AUTO_CSRS_MASK | + USBD_CONTROL_DONE_CSRS_MASK | + (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0); + usbd_writel(udc, val, USBD_CONTROL_REG); + + val = USBD_STRAPS_APP_SELF_PWR_MASK | + USBD_STRAPS_APP_RAM_IF_MASK | + USBD_STRAPS_APP_CSRPRGSUP_MASK | + USBD_STRAPS_APP_8BITPHY_MASK | + USBD_STRAPS_APP_RMTWKUP_MASK; + + if (udc->gadget.max_speed == USB_SPEED_HIGH) + val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT); + else + val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT); + usbd_writel(udc, val, USBD_STRAPS_REG); + + bcm63xx_set_ctrl_irqs(udc, false); + + usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG); + + val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) | + USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS); + usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG); + + rc = iudma_init(udc); + set_clocks(udc, false); + if (rc) + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +/*********************************************************************** + * Standard EP gadget operations + ***********************************************************************/ + +/** + * bcm63xx_ep_enable - Enable one endpoint. + * @ep: Endpoint to enable. + * @desc: Contains max packet, direction, etc. + * + * Most of the endpoint parameters are fixed in this controller, so there + * isn't much for this function to do. + */ +static int bcm63xx_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + unsigned long flags; + + if (!ep || !desc || ep->name == bcm63xx_ep0name) + return -EINVAL; + + if (!udc->driver) + return -ESHUTDOWN; + + spin_lock_irqsave(&udc->lock, flags); + if (iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + iudma->enabled = true; + BUG_ON(!list_empty(&bep->queue)); + + iudma_reset_channel(udc, iudma); + + bep->halted = 0; + bcm63xx_set_stall(udc, bep, false); + clear_bit(bep->ep_num, &udc->wedgemap); + + ep->desc = desc; + ep->maxpacket = usb_endpoint_maxp(desc); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_ep_disable - Disable one endpoint. + * @ep: Endpoint to disable. + */ +static int bcm63xx_ep_disable(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + struct list_head *pos, *n; + unsigned long flags; + + if (!ep || !ep->desc) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (!iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + iudma->enabled = false; + + iudma_reset_channel(udc, iudma); + + if (!list_empty(&bep->queue)) { + list_for_each_safe(pos, n, &bep->queue) { + struct bcm63xx_req *breq = + list_entry(pos, struct bcm63xx_req, queue); + + usb_gadget_unmap_request(&udc->gadget, &breq->req, + iudma->is_tx); + list_del(&breq->queue); + breq->req.status = -ESHUTDOWN; + + spin_unlock_irqrestore(&udc->lock, flags); + breq->req.complete(&iudma->bep->ep, &breq->req); + spin_lock_irqsave(&udc->lock, flags); + } + } + ep->desc = NULL; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_udc_alloc_request - Allocate a new request. + * @ep: Endpoint associated with the request. + * @mem_flags: Flags to pass to kzalloc(). + */ +static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep, + gfp_t mem_flags) +{ + struct bcm63xx_req *breq; + + breq = kzalloc(sizeof(*breq), mem_flags); + if (!breq) + return NULL; + return &breq->req; +} + +/** + * bcm63xx_udc_free_request - Free a request. + * @ep: Endpoint associated with the request. + * @req: Request to free. + */ +static void bcm63xx_udc_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + kfree(breq); +} + +/** + * bcm63xx_udc_queue - Queue up a new request. + * @ep: Endpoint associated with the request. + * @req: Request to add. + * @mem_flags: Unused. + * + * If the queue is empty, start this request immediately. Otherwise, add + * it to the list. + * + * ep0 replies are sent through this function from the gadget driver, but + * they are treated differently because they need to be handled by the ep0 + * state machine. (Sometimes they are replies to control requests that + * were spoofed by this driver, and so they shouldn't be transmitted at all.) + */ +static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t mem_flags) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req); + unsigned long flags; + int rc = 0; + + if (unlikely(!req || !req->complete || !req->buf || !ep)) + return -EINVAL; + + req->actual = 0; + req->status = 0; + breq->offset = 0; + + if (bep == &udc->bep[0]) { + /* only one reply per request, please */ + if (udc->ep0_reply) + return -EINVAL; + + udc->ep0_reply = req; + schedule_work(&udc->ep0_wq); + return 0; + } + + spin_lock_irqsave(&udc->lock, flags); + if (!bep->iudma->enabled) { + rc = -ESHUTDOWN; + goto out; + } + + rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx); + if (rc == 0) { + list_add_tail(&breq->queue, &bep->queue); + if (list_is_singular(&bep->queue)) + iudma_write(udc, bep->iudma, breq); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_dequeue - Remove a pending request from the queue. + * @ep: Endpoint associated with the request. + * @req: Request to remove. + * + * If the request is not at the head of the queue, this is easy - just nuke + * it. If the request is at the head of the queue, we'll need to stop the + * DMA transaction and then queue up the successor. + */ +static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req), *cur; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&udc->lock, flags); + if (list_empty(&bep->queue)) { + rc = -EINVAL; + goto out; + } + + cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx); + + if (breq == cur) { + iudma_reset_channel(udc, bep->iudma); + list_del(&breq->queue); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, bep->iudma, next); + } + } else { + list_del(&breq->queue); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + + req->status = -ESHUTDOWN; + req->complete(ep, req); + + return rc; +} + +/** + * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware. + * @ep: Endpoint to halt. + * @value: Zero to clear halt; nonzero to set halt. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + bcm63xx_set_stall(udc, bep, !!value); + bep->halted = value; + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset. + * @ep: Endpoint to wedge. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_wedge(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + set_bit(bep->ep_num, &udc->wedgemap); + bcm63xx_set_stall(udc, bep, true); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_ep_ops bcm63xx_udc_ep_ops = { + .enable = bcm63xx_ep_enable, + .disable = bcm63xx_ep_disable, + + .alloc_request = bcm63xx_udc_alloc_request, + .free_request = bcm63xx_udc_free_request, + + .queue = bcm63xx_udc_queue, + .dequeue = bcm63xx_udc_dequeue, + + .set_halt = bcm63xx_udc_set_halt, + .set_wedge = bcm63xx_udc_set_wedge, +}; + +/*********************************************************************** + * EP0 handling + ***********************************************************************/ + +/** + * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback. + * @udc: Reference to the device controller. + * @ctrl: 8-byte SETUP request. + */ +static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc, + struct usb_ctrlrequest *ctrl) +{ + int rc; + + spin_unlock_irq(&udc->lock); + rc = udc->driver->setup(&udc->gadget, ctrl); + spin_lock_irq(&udc->lock); + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request. + * @udc: Reference to the device controller. + * + * Many standard requests are handled automatically in the hardware, but + * we still need to pass them to the gadget driver so that it can + * reconfigure the interfaces/endpoints if necessary. + * + * Unfortunately we are not able to send a STALL response if the host + * requests an invalid configuration. If this happens, we'll have to be + * content with printing a warning. + */ +static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE; + ctrl.bRequest = USB_REQ_SET_CONFIGURATION; + ctrl.wValue = cpu_to_le16(udc->cfg); + ctrl.wIndex = 0; + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_CONFIGURATION(%d) request\n", + udc->cfg); + } + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE; + ctrl.bRequest = USB_REQ_SET_INTERFACE; + ctrl.wValue = cpu_to_le16(udc->alt_iface); + ctrl.wIndex = cpu_to_le16(udc->iface); + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_INTERFACE(%d,%d) request\n", + udc->iface, udc->alt_iface); + } + return rc; +} + +/** + * bcm63xx_ep0_map_write - dma_map and iudma_write a single request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @req: USB gadget layer representation of the request. + */ +static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + + BUG_ON(udc->ep0_request); + udc->ep0_request = req; + + req->actual = 0; + breq->offset = 0; + usb_gadget_map_request(&udc->gadget, req, iudma->is_tx); + iudma_write(udc, iudma, breq); +} + +/** + * bcm63xx_ep0_complete - Set completion status and "stage" the callback. + * @udc: Reference to the device controller. + * @req: USB gadget layer representation of the request. + * @status: Status to return to the gadget driver. + */ +static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc, + struct usb_request *req, int status) +{ + req->status = status; + if (status) + req->actual = 0; + if (req->complete) { + spin_unlock_irq(&udc->lock); + req->complete(&udc->bep[0].ep, req); + spin_lock_irq(&udc->lock); + } +} + +/** + * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to + * reset/shutdown. + * @udc: Reference to the device controller. + * @is_tx: Nonzero for TX (IN), zero for RX (OUT). + */ +static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx) +{ + struct usb_request *req = udc->ep0_reply; + + udc->ep0_reply = NULL; + usb_gadget_unmap_request(&udc->gadget, req, is_tx); + if (udc->ep0_request == req) { + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + } + bcm63xx_ep0_complete(udc, req, -ESHUTDOWN); +} + +/** + * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return + * transfer len. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc) +{ + struct usb_request *req = udc->ep0_request; + + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + + return req->actual; +} + +/** + * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @length: Number of bytes to TX/RX. + * + * Used for simple transfers performed by the ep0 worker. This will always + * use ep0_ctrl_req / ep0_ctrl_buf. + */ +static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx, + int length) +{ + struct usb_request *req = &udc->ep0_ctrl_req.req; + + req->buf = udc->ep0_ctrl_buf; + req->length = length; + req->complete = NULL; + + bcm63xx_ep0_map_write(udc, ch_idx, req); +} + +/** + * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it. + * @udc: Reference to the device controller. + * + * EP0_IDLE probably shouldn't ever happen. EP0_REQUEUE means we're ready + * for the next packet. Anything else means the transaction requires multiple + * stages of handling. + */ +static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc) +{ + int rc; + struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf; + + rc = bcm63xx_ep0_read_complete(udc); + + if (rc < 0) { + dev_err(udc->dev, "missing SETUP packet\n"); + return EP0_IDLE; + } + + /* + * Handle 0-byte IN STATUS acknowledgement. The hardware doesn't + * ALWAYS deliver these 100% of the time, so if we happen to see one, + * just throw it away. + */ + if (rc == 0) + return EP0_REQUEUE; + + /* Drop malformed SETUP packets */ + if (rc != sizeof(*ctrl)) { + dev_warn_ratelimited(udc->dev, + "malformed SETUP packet (%d bytes)\n", rc); + return EP0_REQUEUE; + } + + /* Process new SETUP packet arriving on ep0 */ + rc = bcm63xx_ep0_setup_callback(udc, ctrl); + if (rc < 0) { + bcm63xx_set_stall(udc, &udc->bep[0], true); + return EP0_REQUEUE; + } + + if (!ctrl->wLength) + return EP0_REQUEUE; + else if (ctrl->bRequestType & USB_DIR_IN) + return EP0_IN_DATA_PHASE_SETUP; + else + return EP0_OUT_DATA_PHASE_SETUP; +} + +/** + * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle. + * @udc: Reference to the device controller. + * + * In state EP0_IDLE, the RX descriptor is either pending, or has been + * filled with a SETUP packet from the host. This function handles new + * SETUP packets, control IRQ events (which can generate fake SETUP packets), + * and reset/shutdown events. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc) +{ + if (udc->ep0_req_reset) { + udc->ep0_req_reset = 0; + } else if (udc->ep0_req_set_cfg) { + udc->ep0_req_set_cfg = 0; + if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_set_iface) { + udc->ep0_req_set_iface = 0; + if (bcm63xx_ep0_spoof_set_iface(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_completed) { + udc->ep0state = bcm63xx_ep0_do_setup(udc); + return udc->ep0state == EP0_IDLE ? -EAGAIN : 0; + } else if (udc->ep0_req_shutdown) { + udc->ep0_req_shutdown = 0; + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + usb_gadget_unmap_request(&udc->gadget, + &udc->ep0_ctrl_req.req, 0); + + /* bcm63xx_udc_pullup() is waiting for this */ + mb(); + udc->ep0state = EP0_SHUTDOWN; + } else if (udc->ep0_reply) { + /* + * This could happen if a USB RESET shows up during an ep0 + * transaction (especially if a laggy driver like gadgetfs + * is in use). + */ + dev_warn(udc->dev, "nuking unexpected reply\n"); + bcm63xx_ep0_nuke_reply(udc, 0); + } else { + return -EAGAIN; + } + + return 0; +} + +/** + * bcm63xx_ep0_one_round - Handle the current ep0 state. + * @udc: Reference to the device controller. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc) +{ + enum bcm63xx_ep0_state ep0state = udc->ep0state; + bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown; + + switch (udc->ep0state) { + case EP0_REQUEUE: + /* set up descriptor to receive SETUP packet */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN, + BCM63XX_MAX_CTRL_PKT); + ep0state = EP0_IDLE; + break; + case EP0_IDLE: + return bcm63xx_ep0_do_idle(udc); + case EP0_IN_DATA_PHASE_SETUP: + /* + * Normal case: TX request is in ep0_reply (queued by the + * callback), or will be queued shortly. When it's here, + * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE. + * + * Shutdown case: Stop waiting for the reply. Just + * REQUEUE->IDLE. The gadget driver is NOT expected to + * queue anything else now. + */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN, + udc->ep0_reply); + ep0state = EP0_IN_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_DATA_PHASE_COMPLETE: { + /* + * Normal case: TX packet (ep0_reply) is in flight; wait for + * it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: Reset the TX channel, send -ESHUTDOWN + * completion to the gadget driver, then REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + /* + * the "ack" sometimes gets eaten (see + * bcm63xx_ep0_do_idle) + */ + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 1); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_DATA_PHASE_SETUP: + /* Similar behavior to EP0_IN_DATA_PHASE_SETUP */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN, + udc->ep0_reply); + ep0state = EP0_OUT_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_OUT_DATA_PHASE_COMPLETE: { + /* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + + /* send 0-byte ack to host */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0); + ep0state = EP0_OUT_STATUS_PHASE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 0); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_STATUS_PHASE: + /* + * Normal case: 0-byte OUT ack packet is in flight; wait + * for it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: just cancel the transmission. Don't bother + * calling the completion, because it originated from this + * function anyway. Then go back to REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + bcm63xx_ep0_read_complete(udc); + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + udc->ep0_request = NULL; + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_FAKE_STATUS_PHASE: { + /* + * Normal case: we spoofed a SETUP packet and are now + * waiting for the gadget driver to send a 0-byte reply. + * This doesn't actually get sent to the HW because the + * HW has already sent its own reply. Once we get the + * response, return to IDLE. + * + * Shutdown case: return to IDLE immediately. + * + * Note that the ep0 RX descriptor has remained queued + * (and possibly unfilled) during this entire transaction. + * The HW datapath (IUDMA) never even sees SET_CONFIGURATION + * or SET_INTERFACE transactions. + */ + struct usb_request *r = udc->ep0_reply; + + if (!r) { + if (shutdown) + ep0state = EP0_IDLE; + break; + } + + bcm63xx_ep0_complete(udc, r, 0); + udc->ep0_reply = NULL; + ep0state = EP0_IDLE; + break; + } + case EP0_SHUTDOWN: + break; + } + + if (udc->ep0state == ep0state) + return -EAGAIN; + + udc->ep0state = ep0state; + return 0; +} + +/** + * bcm63xx_ep0_process - ep0 worker thread / state machine. + * @w: Workqueue struct. + * + * bcm63xx_ep0_process is triggered any time an event occurs on ep0. It + * is used to synchronize ep0 events and ensure that both HW and SW events + * occur in a well-defined order. When the ep0 IUDMA queues are idle, it may + * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed + * by the USBD hardware. + * + * The worker function will continue iterating around the state machine + * until there is nothing left to do. Usually "nothing left to do" means + * that we're waiting for a new event from the hardware. + */ +static void bcm63xx_ep0_process(struct work_struct *w) +{ + struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq); + spin_lock_irq(&udc->lock); + while (bcm63xx_ep0_one_round(udc) == 0) + ; + spin_unlock_irq(&udc->lock); +} + +/*********************************************************************** + * Standard UDC gadget operations + ***********************************************************************/ + +/** + * bcm63xx_udc_get_frame - Read current SOF frame number from the HW. + * @gadget: USB slave device. + */ +static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + + return (usbd_readl(udc, USBD_STATUS_REG) & + USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT; +} + +/** + * bcm63xx_udc_pullup - Enable/disable pullup on D+ line. + * @gadget: USB slave device. + * @is_on: 0 to disable pullup, 1 to enable. + * + * See notes in bcm63xx_select_pullup(). + */ +static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + int i, rc = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (is_on && udc->ep0state == EP0_SHUTDOWN) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_REQUEUE; + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP); + for (i = 0; i < BCM63XX_NUM_EP; i++) + bcm63xx_set_stall(udc, &udc->bep[i], false); + + bcm63xx_set_ctrl_irqs(udc, true); + bcm63xx_select_pullup(gadget_to_udc(gadget), true); + rc = 0; + } else if (!is_on && udc->ep0state != EP0_SHUTDOWN) { + bcm63xx_select_pullup(gadget_to_udc(gadget), false); + + udc->ep0_req_shutdown = 1; + spin_unlock_irqrestore(&udc->lock, flags); + + while (1) { + schedule_work(&udc->ep0_wq); + if (udc->ep0state == EP0_SHUTDOWN) + break; + msleep(50); + } + bcm63xx_set_ctrl_irqs(udc, false); + cancel_work_sync(&udc->ep0_wq); + return 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_start - Start the controller. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + */ +static int bcm63xx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + if (!driver || driver->max_speed < USB_SPEED_HIGH || + !driver->setup) + return -EINVAL; + if (!udc) + return -ENODEV; + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + set_clocks(udc, true); + bcm63xx_fifo_setup(udc); + bcm63xx_ep_init(udc); + bcm63xx_ep_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_select_phy_mode(udc, true); + + udc->driver = driver; + driver->driver.bus = NULL; + udc->gadget.dev.driver = &driver->driver; + udc->gadget.dev.of_node = udc->dev->of_node; + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_stop - Shut down the controller. + * @gadget: USB slave device. + * @driver: Driver for USB slave devices. + */ +static int bcm63xx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + + /* + * If we switch the PHY too abruptly after dropping D+, the host + * will often complain: + * + * hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... + */ + msleep(100); + + bcm63xx_select_phy_mode(udc, false); + set_clocks(udc, false); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops bcm63xx_udc_ops = { + .get_frame = bcm63xx_udc_get_frame, + .pullup = bcm63xx_udc_pullup, + .udc_start = bcm63xx_udc_start, + .udc_stop = bcm63xx_udc_stop, +}; + +/*********************************************************************** + * IRQ handling + ***********************************************************************/ + +/** + * bcm63xx_update_cfg_iface - Read current configuration/interface settings. + * @udc: Reference to the device controller. + * + * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages. + * The driver never sees the raw control packets coming in on the ep0 + * IUDMA channel, but at least we get an interrupt event to tell us that + * new values are waiting in the USBD_STATUS register. + */ +static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + + udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT; + udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT; + udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >> + USBD_STATUS_ALTINTF_SHIFT; + bcm63xx_ep_setup(udc); +} + +/** + * bcm63xx_update_link_speed - Check to see if the link speed has changed. + * @udc: Reference to the device controller. + * + * The link speed update coincides with a SETUP IRQ. Returns 1 if the + * speed has changed, so that the caller can update the endpoint settings. + */ +static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + enum usb_device_speed oldspeed = udc->gadget.speed; + + switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) { + case BCM63XX_SPD_HIGH: + udc->gadget.speed = USB_SPEED_HIGH; + break; + case BCM63XX_SPD_FULL: + udc->gadget.speed = USB_SPEED_FULL; + break; + default: + /* this should never happen */ + udc->gadget.speed = USB_SPEED_UNKNOWN; + dev_err(udc->dev, + "received SETUP packet with invalid link speed\n"); + return 0; + } + + if (udc->gadget.speed != oldspeed) { + dev_info(udc->dev, "link up, %s-speed mode\n", + udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full"); + return 1; + } else { + return 0; + } +} + +/** + * bcm63xx_update_wedge - Iterate through wedged endpoints. + * @udc: Reference to the device controller. + * @new_status: true to "refresh" wedge status; false to clear it. + * + * On a SETUP interrupt, we need to manually "refresh" the wedge status + * because the controller hardware is designed to automatically clear + * stalls in response to a CLEAR_FEATURE request from the host. + * + * On a RESET interrupt, we do want to restore all wedged endpoints. + */ +static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status) +{ + int i; + + for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) { + bcm63xx_set_stall(udc, &udc->bep[i], new_status); + if (!new_status) + clear_bit(i, &udc->wedgemap); + } +} + +/** + * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD). + * @irq: IRQ number (unused). + * @dev_id: Reference to the device controller. + * + * This is where we handle link (VBUS) down, USB reset, speed changes, + * SET_CONFIGURATION, and SET_INTERFACE events. + */ +static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) +{ + struct bcm63xx_udc *udc = dev_id; + u32 stat; + bool disconnected = false; + + stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) & + usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG); + + usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG); + + spin_lock(&udc->lock); + if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) { + /* VBUS toggled */ + + if (!(usbd_readl(udc, USBD_EVENTS_REG) & + USBD_EVENTS_USB_LINK_MASK) && + udc->gadget.speed != USB_SPEED_UNKNOWN) + dev_info(udc->dev, "link down\n"); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) { + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bcm63xx_update_wedge(udc, false); + + udc->ep0_req_reset = 1; + schedule_work(&udc->ep0_wq); + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_SETUP)) { + if (bcm63xx_update_link_speed(udc)) { + bcm63xx_fifo_setup(udc); + bcm63xx_ep_setup(udc); + } + bcm63xx_update_wedge(udc, true); + } + if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_cfg = 1; + schedule_work(&udc->ep0_wq); + } + if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_iface = 1; + schedule_work(&udc->ep0_wq); + } + spin_unlock(&udc->lock); + + if (disconnected && udc->driver) + udc->driver->disconnect(&udc->gadget); + + return IRQ_HANDLED; +} + +/** + * bcm63xx_udc_data_isr - ISR for data path events (IUDMA). + * @irq: IRQ number (unused). + * @dev_id: Reference to the IUDMA channel that generated the interrupt. + * + * For the two ep0 channels, we have special handling that triggers the + * ep0 worker thread. For normal bulk/intr channels, either queue up + * the next buffer descriptor for the transaction (incomplete transaction), + * or invoke the completion callback (complete transactions). + */ +static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) +{ + struct iudma_ch *iudma = dev_id; + struct bcm63xx_udc *udc = iudma->udc; + struct bcm63xx_ep *bep; + struct usb_request *req = NULL; + struct bcm63xx_req *breq = NULL; + int rc; + bool is_done = false; + + spin_lock(&udc->lock); + + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IR_REG(iudma->ch_idx)); + bep = iudma->bep; + rc = iudma_read(udc, iudma); + + /* special handling for EP0 RX (0) and TX (1) */ + if (iudma->ch_idx == IUDMA_EP0_RXCHAN || + iudma->ch_idx == IUDMA_EP0_TXCHAN) { + req = udc->ep0_request; + breq = our_req(req); + + /* a single request could require multiple submissions */ + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + udc->ep0_req_completed = 1; + is_done = true; + schedule_work(&udc->ep0_wq); + + /* "actual" on a ZLP is 1 byte */ + req->actual = min(req->actual, req->length); + } else { + /* queue up the next BD (same request) */ + iudma_write(udc, iudma, breq); + } + } + } else if (!list_empty(&bep->queue)) { + breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + req = &breq->req; + + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + is_done = true; + list_del(&breq->queue); + + req->actual = min(req->actual, req->length); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, iudma, next); + } + } else { + iudma_write(udc, iudma, breq); + } + } + } + spin_unlock(&udc->lock); + + if (is_done) { + usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx); + if (req->complete) + req->complete(&bep->ep, req); + } + + return IRQ_HANDLED; +} + +/*********************************************************************** + * Debug filesystem + ***********************************************************************/ + +/* + * bcm63xx_usbd_dbg_show - Show USBD controller state. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd + */ +static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + + if (!udc->driver) + return -ENODEV; + + seq_printf(s, "ep0 state: %s\n", + bcm63xx_ep0_state_names[udc->ep0state]); + seq_printf(s, " pending requests: %s%s%s%s%s%s%s\n", + udc->ep0_req_reset ? "reset " : "", + udc->ep0_req_set_cfg ? "set_cfg " : "", + udc->ep0_req_set_iface ? "set_iface " : "", + udc->ep0_req_shutdown ? "shutdown " : "", + udc->ep0_request ? "pending " : "", + udc->ep0_req_completed ? "completed " : "", + udc->ep0_reply ? "reply " : ""); + seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n", + udc->cfg, udc->iface, udc->alt_iface); + seq_printf(s, "regs:\n"); + seq_printf(s, " control: %08x; straps: %08x; status: %08x\n", + usbd_readl(udc, USBD_CONTROL_REG), + usbd_readl(udc, USBD_STRAPS_REG), + usbd_readl(udc, USBD_STATUS_REG)); + seq_printf(s, " events: %08x; stall: %08x\n", + usbd_readl(udc, USBD_EVENTS_REG), + usbd_readl(udc, USBD_STALL_REG)); + + return 0; +} + +/* + * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma + */ +static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + int ch_idx, i; + u32 sram2, sram3; + + if (!udc->driver) + return -ENODEV; + + for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) { + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + struct list_head *pos; + + seq_printf(s, "IUDMA channel %d -- ", ch_idx); + switch (iudma_defaults[ch_idx].ep_type) { + case BCMEP_CTRL: + seq_printf(s, "control"); + break; + case BCMEP_BULK: + seq_printf(s, "bulk"); + break; + case BCMEP_INTR: + seq_printf(s, "interrupt"); + break; + } + seq_printf(s, ch_idx & 0x01 ? " tx" : " rx"); + seq_printf(s, " [ep%d]:\n", + max_t(int, iudma_defaults[ch_idx].ep_num, 0)); + seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); + + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); + seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", + usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), + sram2 >> 16, sram2 & 0xffff, + sram3 >> 16, sram3 & 0xffff, + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); + seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, + iudma->n_bds); + + if (iudma->bep) { + i = 0; + list_for_each(pos, &iudma->bep->queue) + i++; + seq_printf(s, "; %d queued\n", i); + } else { + seq_printf(s, "\n"); + } + + for (i = 0; i < iudma->n_bds; i++) { + struct bcm_enet_desc *d = &iudma->bd_ring[i]; + + seq_printf(s, " %03x (%02x): len_stat: %04x_%04x; pa %08x", + i * sizeof(*d), i, + d->len_stat >> 16, d->len_stat & 0xffff, + d->address); + if (d == iudma->read_bd) + seq_printf(s, " <<RD"); + if (d == iudma->write_bd) + seq_printf(s, " <<WR"); + seq_printf(s, "\n"); + } + + seq_printf(s, "\n"); + } + + return 0; +} + +static int bcm63xx_usbd_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, bcm63xx_usbd_dbg_show, inode->i_private); +} + +static int bcm63xx_iudma_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, bcm63xx_iudma_dbg_show, inode->i_private); +} + +static const struct file_operations usbd_dbg_fops = { + .owner = THIS_MODULE, + .open = bcm63xx_usbd_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static const struct file_operations iudma_dbg_fops = { + .owner = THIS_MODULE, + .open = bcm63xx_iudma_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + + +/** + * bcm63xx_udc_init_debugfs - Create debugfs entries. + * @udc: Reference to the device controller. + */ +static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) +{ + struct dentry *root, *usbd, *iudma; + + if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) + return; + + root = debugfs_create_dir(udc->gadget.name, NULL); + if (IS_ERR(root) || !root) + goto err_root; + + usbd = debugfs_create_file("usbd", 0400, root, udc, + &usbd_dbg_fops); + if (!usbd) + goto err_usbd; + iudma = debugfs_create_file("iudma", 0400, root, udc, + &iudma_dbg_fops); + if (!iudma) + goto err_iudma; + + udc->debugfs_root = root; + udc->debugfs_usbd = usbd; + udc->debugfs_iudma = iudma; + return; +err_iudma: + debugfs_remove(usbd); +err_usbd: + debugfs_remove(root); +err_root: + dev_err(udc->dev, "debugfs is not available\n"); +} + +/** + * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries. + * @udc: Reference to the device controller. + * + * debugfs_remove() is safe to call with a NULL argument. + */ +static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) +{ + debugfs_remove(udc->debugfs_iudma); + debugfs_remove(udc->debugfs_usbd); + debugfs_remove(udc->debugfs_root); + udc->debugfs_iudma = NULL; + udc->debugfs_usbd = NULL; + udc->debugfs_root = NULL; +} + +/*********************************************************************** + * Driver init/exit + ***********************************************************************/ + +/** + * bcm63xx_udc_gadget_release - Called from device_release(). + * @dev: Unused. + * + * We get a warning if this function doesn't exist, but it's empty because + * we don't have to free any of the memory allocated with the devm_* APIs. + */ +static void bcm63xx_udc_gadget_release(struct device *dev) +{ +} + +/** + * bcm63xx_udc_probe - Initialize a new instance of the UDC. + * @pdev: Platform device struct from the bcm63xx BSP code. + * + * Note that platform data is required, because pd.port_no varies from chip + * to chip and is used to switch the correct USB port to device mode. + */ +static int __devinit bcm63xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm63xx_usbd_platform_data *pd = dev->platform_data; + struct bcm63xx_udc *udc; + struct resource *res; + int rc = -ENOMEM, i, irq; + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) { + dev_err(dev, "cannot allocate memory\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, udc); + udc->dev = dev; + udc->pd = pd; + + if (!pd) { + dev_err(dev, "missing platform data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "error finding USBD resource\n"); + return -ENXIO; + } + udc->usbd_regs = devm_request_and_ioremap(dev, res); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(dev, "error finding IUDMA resource\n"); + return -ENXIO; + } + udc->iudma_regs = devm_request_and_ioremap(dev, res); + + if (!udc->usbd_regs || !udc->iudma_regs) { + dev_err(dev, "error requesting resources\n"); + return -ENXIO; + } + + spin_lock_init(&udc->lock); + INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); + dev_set_name(&udc->gadget.dev, "gadget"); + + udc->gadget.ops = &bcm63xx_udc_ops; + udc->gadget.name = dev_name(dev); + udc->gadget.dev.parent = dev; + udc->gadget.dev.release = bcm63xx_udc_gadget_release; + udc->gadget.dev.dma_mask = dev->dma_mask; + + if (!pd->use_fullspeed && !use_fullspeed) + udc->gadget.max_speed = USB_SPEED_HIGH; + else + udc->gadget.max_speed = USB_SPEED_FULL; + + /* request clocks, allocate buffers, and clear any pending IRQs */ + rc = bcm63xx_init_udc_hw(udc); + if (rc) + return rc; + + rc = -ENXIO; + + /* IRQ resource #0: control interrupt (VBUS, speed, etc.) */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "missing IRQ resource #0\n"); + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0, + dev_name(dev), udc) < 0) { + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; + } + + /* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */ + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + irq = platform_get_irq(pdev, i + 1); + if (irq < 0) { + dev_err(dev, "missing IRQ resource #%d\n", i + 1); + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0, + dev_name(dev), &udc->iudma[i]) < 0) { + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; + } + } + + rc = device_register(&udc->gadget.dev); + if (rc) + goto out_uninit; + + bcm63xx_udc_init_debugfs(udc); + rc = usb_add_gadget_udc(dev, &udc->gadget); + if (!rc) + return 0; + + bcm63xx_udc_cleanup_debugfs(udc); + device_unregister(&udc->gadget.dev); +out_uninit: + bcm63xx_uninit_udc_hw(udc); + return rc; +} + +/** + * bcm63xx_udc_remove - Remove the device from the system. + * @pdev: Platform device struct from the bcm63xx BSP code. + */ +static int __devexit bcm63xx_udc_remove(struct platform_device *pdev) +{ + struct bcm63xx_udc *udc = platform_get_drvdata(pdev); + + bcm63xx_udc_cleanup_debugfs(udc); + usb_del_gadget_udc(&udc->gadget); + device_unregister(&udc->gadget.dev); + BUG_ON(udc->driver); + + platform_set_drvdata(pdev, NULL); + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +static struct platform_driver bcm63xx_udc_driver = { + .probe = bcm63xx_udc_probe, + .remove = __devexit_p(bcm63xx_udc_remove), + .driver = { + .name = DRV_MODULE_NAME, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(bcm63xx_udc_driver); + +MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller"); +MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_MODULE_NAME); diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 725550f06fab..1e4bb77f00bb 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -11,7 +11,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/module.h> #include "u_ether.h" @@ -34,6 +33,7 @@ #define CDC_PRODUCT_NUM 0xa4aa /* CDC Composite: ECM + ACM */ /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); /* * Kbuild is not very cooperative with respect to linking separately @@ -43,10 +43,6 @@ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "u_serial.c" #include "f_acm.c" #include "f_ecm.c" @@ -92,15 +88,10 @@ static const struct usb_descriptor_header *otg_desc[] = { /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -152,7 +143,6 @@ static struct usb_configuration cdc_config_driver = { static int __init cdc_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -172,47 +162,22 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) if (status < 0) goto fail0; - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - WARNING(cdev, "controller '%s' not recognized; trying %s\n", - gadget->name, - cdc_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail1; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail1; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &cdc_config_driver, cdc_do_config); if (status < 0) goto fail1; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); @@ -232,11 +197,12 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver cdc_driver = { +static __refdata struct usb_composite_driver cdc_driver = { .name = "g_cdc", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = cdc_bind, .unbind = __exit_p(cdc_unbind), }; @@ -246,7 +212,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(&cdc_driver, cdc_bind); + return usb_composite_probe(&cdc_driver); } module_init(init); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 3f72110da1b0..957f973dd96a 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -28,44 +28,6 @@ * with the relevant device-wide data. */ -/* big enough to hold our biggest descriptor */ -#define USB_BUFSIZ 1024 - -static struct usb_composite_driver *composite; -static int (*composite_gadget_bind)(struct usb_composite_dev *cdev); - -/* Some systems will need runtime overrides for the product identifiers - * published in the device descriptor, either numbers or strings or both. - * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). - */ - -static ushort idVendor; -module_param(idVendor, ushort, 0644); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, 0644); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, 0644); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, 0644); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, 0644); -MODULE_PARM_DESC(iProduct, "USB Product string"); - -static char *iSerialNumber; -module_param(iSerialNumber, charp, 0644); -MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); - -static char composite_manufacturer[50]; - -/*-------------------------------------------------------------------------*/ /** * next_ep_desc() - advance to the next EP descriptor * @t: currect pointer within descriptor array @@ -192,6 +154,7 @@ ep_found: } return 0; } +EXPORT_SYMBOL_GPL(config_ep_by_speed); /** * usb_add_function() - add a function to a configuration @@ -250,6 +213,7 @@ done: function->name, function, value); return value; } +EXPORT_SYMBOL_GPL(usb_add_function); /** * usb_function_deactivate - prevent function and gadget enumeration @@ -286,6 +250,7 @@ int usb_function_deactivate(struct usb_function *function) spin_unlock_irqrestore(&cdev->lock, flags); return status; } +EXPORT_SYMBOL_GPL(usb_function_deactivate); /** * usb_function_activate - allow function and gadget enumeration @@ -300,9 +265,10 @@ int usb_function_deactivate(struct usb_function *function) int usb_function_activate(struct usb_function *function) { struct usb_composite_dev *cdev = function->config->cdev; + unsigned long flags; int status = 0; - spin_lock(&cdev->lock); + spin_lock_irqsave(&cdev->lock, flags); if (WARN_ON(cdev->deactivations == 0)) status = -EINVAL; @@ -312,9 +278,10 @@ int usb_function_activate(struct usb_function *function) status = usb_gadget_connect(cdev->gadget); } - spin_unlock(&cdev->lock); + spin_unlock_irqrestore(&cdev->lock, flags); return status; } +EXPORT_SYMBOL_GPL(usb_function_activate); /** * usb_interface_id() - allocate an unused interface ID @@ -351,16 +318,18 @@ int usb_interface_id(struct usb_configuration *config, } return -ENODEV; } +EXPORT_SYMBOL_GPL(usb_interface_id); static int config_buf(struct usb_configuration *config, enum usb_device_speed speed, void *buf, u8 type) { struct usb_config_descriptor *c = buf; void *next = buf + USB_DT_CONFIG_SIZE; - int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE; + int len; struct usb_function *f; int status; + len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE; /* write the config descriptor */ c = buf; c->bLength = USB_DT_CONFIG_SIZE; @@ -790,6 +759,7 @@ done: config->bConfigurationValue, status); return status; } +EXPORT_SYMBOL_GPL(usb_add_config); static void remove_config(struct usb_composite_dev *cdev, struct usb_configuration *config) @@ -889,10 +859,10 @@ static int lookup_string( static int get_string(struct usb_composite_dev *cdev, void *buf, u16 language, int id) { + struct usb_composite_driver *composite = cdev->driver; struct usb_configuration *c; struct usb_function *f; int len; - const char *str; /* Yes, not only is USB's I18N support probably more than most * folk will ever care about ... also, it's all supported here. @@ -932,26 +902,6 @@ static int get_string(struct usb_composite_dev *cdev, return s->bLength; } - /* Otherwise, look up and return a specified string. First - * check if the string has not been overridden. - */ - if (cdev->manufacturer_override == id) - str = iManufacturer ?: composite->iManufacturer ?: - composite_manufacturer; - else if (cdev->product_override == id) - str = iProduct ?: composite->iProduct; - else if (cdev->serial_override == id) - str = iSerialNumber ?: composite->iSerialNumber; - else - str = NULL; - if (str) { - struct usb_gadget_strings strings = { - .language = language, - .strings = &(struct usb_string) { 0xff, str } - }; - return usb_gadget_get_string(&strings, 0xff, buf); - } - /* String IDs are device-scoped, so we look up each string * table we're told about. These lookups are infrequent; * simpler-is-better here. @@ -1003,6 +953,7 @@ int usb_string_id(struct usb_composite_dev *cdev) } return -ENODEV; } +EXPORT_SYMBOL_GPL(usb_string_id); /** * usb_string_ids() - allocate unused string IDs in batch @@ -1034,6 +985,7 @@ int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) return 0; } +EXPORT_SYMBOL_GPL(usb_string_ids_tab); /** * usb_string_ids_n() - allocate unused string IDs in batch @@ -1062,7 +1014,7 @@ int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) c->next_string_id += n; return next + 1; } - +EXPORT_SYMBOL_GPL(usb_string_ids_n); /*-------------------------------------------------------------------------*/ @@ -1359,8 +1311,8 @@ static void composite_disconnect(struct usb_gadget *gadget) spin_lock_irqsave(&cdev->lock, flags); if (cdev->config) reset_config(cdev); - if (composite->disconnect) - composite->disconnect(cdev); + if (cdev->driver->disconnect) + cdev->driver->disconnect(cdev); spin_unlock_irqrestore(&cdev->lock, flags); } @@ -1396,35 +1348,67 @@ composite_unbind(struct usb_gadget *gadget) struct usb_configuration, list); remove_config(cdev, c); } - if (composite->unbind) - composite->unbind(cdev); + if (cdev->driver->unbind) + cdev->driver->unbind(cdev); if (cdev->req) { kfree(cdev->req->buf); usb_ep_free_request(gadget->ep0, cdev->req); } device_remove_file(&gadget->dev, &dev_attr_suspended); + kfree(cdev->def_manufacturer); kfree(cdev); set_gadget_data(gadget, NULL); - composite = NULL; } -static u8 override_id(struct usb_composite_dev *cdev, u8 *desc) +static void update_unchanged_dev_desc(struct usb_device_descriptor *new, + const struct usb_device_descriptor *old) { - if (!*desc) { - int ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - WARNING(cdev, "failed to override string ID\n"); - else - *desc = ret; - } + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + u8 iSerialNumber; + u8 iManufacturer; + u8 iProduct; - return *desc; + /* + * these variables may have been set in + * usb_composite_overwrite_options() + */ + idVendor = new->idVendor; + idProduct = new->idProduct; + bcdDevice = new->bcdDevice; + iSerialNumber = new->iSerialNumber; + iManufacturer = new->iManufacturer; + iProduct = new->iProduct; + + *new = *old; + if (idVendor) + new->idVendor = idVendor; + if (idProduct) + new->idProduct = idProduct; + if (bcdDevice) + new->bcdDevice = bcdDevice; + else + new->bcdDevice = cpu_to_le16(get_default_bcdDevice()); + if (iSerialNumber) + new->iSerialNumber = iSerialNumber; + if (iManufacturer) + new->iManufacturer = iManufacturer; + if (iProduct) + new->iProduct = iProduct; } -static int composite_bind(struct usb_gadget *gadget) +static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv) +{ + return container_of(gdrv, struct usb_composite_driver, gadget_driver); +} + +static int composite_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *gdriver) { struct usb_composite_dev *cdev; + struct usb_composite_driver *composite = to_cdriver(gdriver); int status = -ENOMEM; cdev = kzalloc(sizeof *cdev, GFP_KERNEL); @@ -1440,13 +1424,12 @@ static int composite_bind(struct usb_gadget *gadget) cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); if (!cdev->req) goto fail; - cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL); + cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); if (!cdev->req->buf) goto fail; cdev->req->complete = composite_setup_complete; gadget->ep0->driver_data = cdev; - cdev->bufsiz = USB_BUFSIZ; cdev->driver = composite; /* @@ -1467,49 +1450,11 @@ static int composite_bind(struct usb_gadget *gadget) * serial number), register function drivers, potentially update * power state and consumption, etc */ - status = composite_gadget_bind(cdev); + status = composite->bind(cdev); if (status < 0) goto fail; - cdev->desc = *composite->dev; - - /* standardized runtime overrides for device ID data */ - if (idVendor) - cdev->desc.idVendor = cpu_to_le16(idVendor); - else - idVendor = le16_to_cpu(cdev->desc.idVendor); - if (idProduct) - cdev->desc.idProduct = cpu_to_le16(idProduct); - else - idProduct = le16_to_cpu(cdev->desc.idProduct); - if (bcdDevice) - cdev->desc.bcdDevice = cpu_to_le16(bcdDevice); - else - bcdDevice = le16_to_cpu(cdev->desc.bcdDevice); - - /* string overrides */ - if (iManufacturer || !cdev->desc.iManufacturer) { - if (!iManufacturer && !composite->iManufacturer && - !*composite_manufacturer) - snprintf(composite_manufacturer, - sizeof composite_manufacturer, - "%s %s with %s", - init_utsname()->sysname, - init_utsname()->release, - gadget->name); - - cdev->manufacturer_override = - override_id(cdev, &cdev->desc.iManufacturer); - } - - if (iProduct || (!cdev->desc.iProduct && composite->iProduct)) - cdev->product_override = - override_id(cdev, &cdev->desc.iProduct); - - if (iSerialNumber || - (!cdev->desc.iSerialNumber && composite->iSerialNumber)) - cdev->serial_override = - override_id(cdev, &cdev->desc.iSerialNumber); + update_unchanged_dev_desc(&cdev->desc, composite->dev); /* has userspace failed to provide a serial number? */ if (composite->needs_serial && !cdev->desc.iSerialNumber) @@ -1546,8 +1491,8 @@ composite_suspend(struct usb_gadget *gadget) f->suspend(f); } } - if (composite->suspend) - composite->suspend(cdev); + if (cdev->driver->suspend) + cdev->driver->suspend(cdev); cdev->suspended = 1; @@ -1565,8 +1510,8 @@ composite_resume(struct usb_gadget *gadget) * suspend/resume callbacks? */ DBG(cdev, "resume\n"); - if (composite->resume) - composite->resume(cdev); + if (cdev->driver->resume) + cdev->driver->resume(cdev); if (cdev->config) { list_for_each_entry(f, &cdev->config->functions, list) { if (f->resume) @@ -1584,13 +1529,8 @@ composite_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ -static struct usb_gadget_driver composite_driver = { -#ifdef CONFIG_USB_GADGET_SUPERSPEED - .max_speed = USB_SPEED_SUPER, -#else - .max_speed = USB_SPEED_HIGH, -#endif - +static const struct usb_gadget_driver composite_driver_template = { + .bind = composite_bind, .unbind = composite_unbind, .setup = composite_setup, @@ -1623,25 +1563,26 @@ static struct usb_gadget_driver composite_driver = { * while it was binding. That would usually be done in order to wait for * some userspace participation. */ -int usb_composite_probe(struct usb_composite_driver *driver, - int (*bind)(struct usb_composite_dev *cdev)) +int usb_composite_probe(struct usb_composite_driver *driver) { - if (!driver || !driver->dev || !bind || composite) + struct usb_gadget_driver *gadget_driver; + + if (!driver || !driver->dev || !driver->bind) return -EINVAL; if (!driver->name) driver->name = "composite"; - if (!driver->iProduct) - driver->iProduct = driver->name; - composite_driver.function = (char *) driver->name; - composite_driver.driver.name = driver->name; - composite_driver.max_speed = - min_t(u8, composite_driver.max_speed, driver->max_speed); - composite = driver; - composite_gadget_bind = bind; - - return usb_gadget_probe_driver(&composite_driver, composite_bind); + + driver->gadget_driver = composite_driver_template; + gadget_driver = &driver->gadget_driver; + + gadget_driver->function = (char *) driver->name; + gadget_driver->driver.name = driver->name; + gadget_driver->max_speed = driver->max_speed; + + return usb_gadget_probe_driver(gadget_driver); } +EXPORT_SYMBOL_GPL(usb_composite_probe); /** * usb_composite_unregister() - unregister a composite driver @@ -1652,10 +1593,9 @@ int usb_composite_probe(struct usb_composite_driver *driver, */ void usb_composite_unregister(struct usb_composite_driver *driver) { - if (composite != driver) - return; - usb_gadget_unregister_driver(&composite_driver); + usb_gadget_unregister_driver(&driver->gadget_driver); } +EXPORT_SYMBOL_GPL(usb_composite_unregister); /** * usb_composite_setup_continue() - Continue with the control transfer @@ -1692,4 +1632,60 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev) spin_unlock_irqrestore(&cdev->lock, flags); } +EXPORT_SYMBOL_GPL(usb_composite_setup_continue); + +static char *composite_default_mfr(struct usb_gadget *gadget) +{ + char *mfr; + int len; + + len = snprintf(NULL, 0, "%s %s with %s", init_utsname()->sysname, + init_utsname()->release, gadget->name); + len++; + mfr = kmalloc(len, GFP_KERNEL); + if (!mfr) + return NULL; + snprintf(mfr, len, "%s %s with %s", init_utsname()->sysname, + init_utsname()->release, gadget->name); + return mfr; +} + +void usb_composite_overwrite_options(struct usb_composite_dev *cdev, + struct usb_composite_overwrite *covr) +{ + struct usb_device_descriptor *desc = &cdev->desc; + struct usb_gadget_strings *gstr = cdev->driver->strings[0]; + struct usb_string *dev_str = gstr->strings; + + if (covr->idVendor) + desc->idVendor = cpu_to_le16(covr->idVendor); + + if (covr->idProduct) + desc->idProduct = cpu_to_le16(covr->idProduct); + + if (covr->bcdDevice) + desc->bcdDevice = cpu_to_le16(covr->bcdDevice); + + if (covr->serial_number) { + desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id; + dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number; + } + if (covr->manufacturer) { + desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id; + dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer; + + } else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) { + desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id; + cdev->def_manufacturer = composite_default_mfr(cdev->gadget); + dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer; + } + + if (covr->product) { + desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id; + dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product; + } +} +EXPORT_SYMBOL_GPL(usb_composite_overwrite_options); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 7542a72ce51a..e3a98929d346 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -12,6 +12,7 @@ #include <linux/errno.h> #include <linux/slab.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/list.h> #include <linux/string.h> #include <linux/device.h> @@ -53,7 +54,7 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen, } return dest - (u8 *)buf; } - +EXPORT_SYMBOL_GPL(usb_descriptor_fillbuf); /** * usb_gadget_config_buf - builts a complete configuration descriptor @@ -106,6 +107,7 @@ int usb_gadget_config_buf( cp->bmAttributes |= USB_CONFIG_ATT_ONE; return len; } +EXPORT_SYMBOL_GPL(usb_gadget_config_buf); /** * usb_copy_descriptors - copy a vector of USB descriptors @@ -155,4 +157,4 @@ usb_copy_descriptors(struct usb_descriptor_header **src) return ret; } - +EXPORT_SYMBOL_GPL(usb_copy_descriptors); diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c index 19d7bb0df75a..87d165028162 100644 --- a/drivers/usb/gadget/dbgp.c +++ b/drivers/usb/gadget/dbgp.c @@ -13,9 +13,6 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -/* See comments in "zero.c" */ -#include "epautoconf.c" - #ifdef CONFIG_USB_G_DBGP_SERIAL #include "u_serial.c" #endif @@ -292,7 +289,8 @@ fail_1: return -ENODEV; } -static int __init dbgp_bind(struct usb_gadget *gadget) +static int __init dbgp_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { int err, stp; @@ -402,9 +400,10 @@ fail: return err; } -static struct usb_gadget_driver dbgp_driver = { +static __refdata struct usb_gadget_driver dbgp_driver = { .function = "dbgp", .max_speed = USB_SPEED_HIGH, + .bind = dbgp_bind, .unbind = dbgp_unbind, .setup = dbgp_setup, .disconnect = dbgp_disconnect, @@ -416,7 +415,7 @@ static struct usb_gadget_driver dbgp_driver = { static int __init dbgp_init(void) { - return usb_gadget_probe_driver(&dbgp_driver, dbgp_bind); + return usb_gadget_probe_driver(&dbgp_driver); } static void __exit dbgp_exit(void) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index b799106027ad..0f7541be28f3 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -909,6 +909,7 @@ static int dummy_udc_start(struct usb_gadget *g, dum->devstatus = 0; dum->driver = driver; + dum->gadget.dev.driver = &driver->driver; dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n", driver->driver.name); return 0; @@ -923,6 +924,7 @@ static int dummy_udc_stop(struct usb_gadget *g, dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n", driver->driver.name); + dum->gadget.dev.driver = NULL; dum->driver = NULL; return 0; @@ -1916,6 +1918,27 @@ done: return retval; } +/* usb 3.0 root hub device descriptor */ +struct { + struct usb_bos_descriptor bos; + struct usb_ss_cap_descriptor ss_cap; +} __packed usb3_bos_desc = { + + .bos = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), + .bNumDeviceCaps = 1, + }, + .ss_cap = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), + .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), + }, +}; + static inline void ss_hub_descriptor(struct usb_hub_descriptor *desc) { @@ -2006,6 +2029,18 @@ static int dummy_hub_control( else hub_descriptor((struct usb_hub_descriptor *) buf); break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if (hcd->speed != HCD_USB3) + goto error; + + if ((wValue >> 8) != USB_DT_BOS) + goto error; + + memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); + retval = sizeof(usb3_bos_desc); + break; + case GetHubStatus: *(__le32 *) buf = cpu_to_le32(0); break; @@ -2503,10 +2538,8 @@ static int dummy_hcd_probe(struct platform_device *pdev) hs_hcd->has_tt = 1; retval = usb_add_hcd(hs_hcd, 0, 0); - if (retval != 0) { - usb_put_hcd(hs_hcd); - return retval; - } + if (retval) + goto put_usb2_hcd; if (mod_data.is_super_speed) { ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, @@ -2525,6 +2558,8 @@ static int dummy_hcd_probe(struct platform_device *pdev) put_usb3_hcd: usb_put_hcd(ss_hcd); dealloc_usb2_hcd: + usb_remove_hcd(hs_hcd); +put_usb2_hcd: usb_put_hcd(hs_hcd); the_controller.hs_hcd = the_controller.ss_hcd = NULL; return retval; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 51f3d42f5a64..a777f7bd11b4 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -10,6 +10,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/types.h> #include <linux/device.h> @@ -22,17 +23,6 @@ #include "gadget_chips.h" - -/* we must assign addresses for configurable endpoints (like net2280) */ -static unsigned epnum; - -// #define MANY_ENDPOINTS -#ifdef MANY_ENDPOINTS -/* more than 15 configurable endpoints */ -static unsigned in_epnum; -#endif - - /* * This should work with endpoints from controller drivers sharing the * same endpoint naming convention. By example: @@ -176,16 +166,14 @@ ep_matches ( if (isdigit (ep->name [2])) { u8 num = simple_strtoul (&ep->name [2], NULL, 10); desc->bEndpointAddress |= num; -#ifdef MANY_ENDPOINTS } else if (desc->bEndpointAddress & USB_DIR_IN) { - if (++in_epnum > 15) + if (++gadget->in_epnum > 15) return 0; - desc->bEndpointAddress = USB_DIR_IN | in_epnum; -#endif + desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum; } else { - if (++epnum > 15) + if (++gadget->out_epnum > 15) return 0; - desc->bEndpointAddress |= epnum; + desc->bEndpointAddress |= gadget->out_epnum; } /* report (variable) full speed bulk maxpacket */ @@ -328,6 +316,7 @@ found_ep: ep->comp_desc = NULL; return ep; } +EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss); /** * usb_ep_autoconfig() - choose an endpoint matching the @@ -367,7 +356,7 @@ struct usb_ep *usb_ep_autoconfig( { return usb_ep_autoconfig_ss(gadget, desc, NULL); } - +EXPORT_SYMBOL_GPL(usb_ep_autoconfig); /** * usb_ep_autoconfig_reset - reset endpoint autoconfig state @@ -385,9 +374,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget) list_for_each_entry (ep, &gadget->ep_list, ep_list) { ep->driver_data = NULL; } -#ifdef MANY_ENDPOINTS - in_epnum = 0; -#endif - epnum = 0; + gadget->in_epnum = 0; + gadget->out_epnum = 0; } - +EXPORT_SYMBOL_GPL(usb_ep_autoconfig_reset); diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index a28f6ffcd0f3..18c3f423706e 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -14,8 +14,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> - #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS @@ -102,11 +100,6 @@ static inline bool has_rndis(void) * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_ecm.c" #include "f_subset.c" #ifdef USB_ETH_RNDIS @@ -117,6 +110,7 @@ static inline bool has_rndis(void) #include "u_ether.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. @@ -195,17 +189,10 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; - -/* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = PREFIX DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -288,7 +275,6 @@ static struct usb_configuration eth_config_driver = { static int __init eth_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -323,42 +309,15 @@ static int __init eth_bind(struct usb_composite_dev *cdev) device_desc.bNumConfigurations = 2; } - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - dev_warn(&gadget->dev, - "controller '%s' not recognized; trying %s\n", - gadget->name, - eth_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration(s); RNDIS first, if it's used */ if (has_rndis()) { @@ -372,6 +331,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev) if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); @@ -388,11 +348,12 @@ static int __exit eth_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver eth_driver = { +static __refdata struct usb_composite_driver eth_driver = { .name = "g_ether", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, + .bind = eth_bind, .unbind = __exit_p(eth_unbind), }; @@ -402,7 +363,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(ð_driver, eth_bind); + return usb_composite_probe(ð_driver); } module_init(init); diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 30b908f2a53d..95bc94f8e570 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -897,10 +897,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) return -ENOMEM; /* export host's Ethernet address in CDC format */ - snprintf(ecm->ethaddr, sizeof ecm->ethaddr, - "%02X%02X%02X%02X%02X%02X", - ethaddr[0], ethaddr[1], ethaddr[2], - ethaddr[3], ethaddr[4], ethaddr[5]); + snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr); ecm_string_defs[1].s = ecm->ethaddr; ecm->port.cdc_filter = DEFAULT_FILTER; diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 8adc79d1b402..829aba75a6df 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -34,11 +34,15 @@ /* Debugging ****************************************************************/ #ifdef VERBOSE_DEBUG +#ifndef pr_vdebug # define pr_vdebug pr_debug +#endif /* pr_vdebug */ # define ffs_dump_mem(prefix, ptr, len) \ print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len) #else +#ifndef pr_vdebug # define pr_vdebug(...) do { } while (0) +#endif /* pr_vdebug */ # define ffs_dump_mem(prefix, ptr, len) do { } while (0) #endif /* VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 16a8b1c15c62..511e527178e2 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -10,7 +10,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/module.h> #include <linux/hid.h> #include <linux/cdev.h> @@ -18,6 +17,7 @@ #include <linux/poll.h> #include <linux/uaccess.h> #include <linux/wait.h> +#include <linux/sched.h> #include <linux/usb/g_hid.h> static int major, minors; diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 4f1142efa6d1..3a7668bde3ef 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -213,7 +213,6 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/freezer.h> -#include <linux/utsname.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -349,7 +348,6 @@ struct fsg_config { const char *vendor_name; /* 8 characters or less */ const char *product_name; /* 16 characters or less */ - u16 release; char can_stall; }; @@ -2773,18 +2771,7 @@ buffhds_first_it: bh->next = common->buffhds; /* Prepare inquiryString */ - if (cfg->release != 0xffff) { - i = cfg->release; - } else { - i = usb_gadget_controller_number(gadget); - if (i >= 0) { - i = 0x0300 + i; - } else { - WARNING(common, "controller '%s' not recognized\n", - gadget->name); - i = 0x0399; - } - } + i = get_default_bcdDevice(); snprintf(common->inquiry_string, sizeof common->inquiry_string, "%-8s%-16s%04x", cfg->vendor_name ?: "Linux", /* Assume product name dependent on the first LUN */ @@ -3110,7 +3097,6 @@ fsg_config_from_params(struct fsg_config *cfg, /* Let MSF use defaults */ cfg->vendor_name = 0; cfg->product_name = 0; - cfg->release = 0xffff; cfg->ops = NULL; cfg->private_data = NULL; diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c index 2f7e8f2930cc..8ed1259fe80d 100644 --- a/drivers/usb/gadget/f_midi.c +++ b/drivers/usb/gadget/f_midi.c @@ -21,7 +21,6 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/utsname.h> #include <linux/device.h> #include <sound/core.h> diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index aab8eded045b..b651b529c67f 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -1346,10 +1346,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) return -ENOMEM; /* export host's Ethernet address in CDC format */ - snprintf(ncm->ethaddr, sizeof ncm->ethaddr, - "%02X%02X%02X%02X%02X%02X", - ethaddr[0], ethaddr[1], ethaddr[2], - ethaddr[3], ethaddr[4], ethaddr[5]); + snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr); ncm_string_defs[1].s = ncm->ethaddr; spin_lock_init(&ncm->lock); diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 5c1b68b63c98..3c126fde6e7e 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -795,7 +795,7 @@ static int sourcesink_setup(struct usb_configuration *c, u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); - req->length = USB_BUFSIZ; + req->length = USB_COMP_EP0_BUFSIZ; /* composite driver infrastructure handles everything except * the two control test requests. diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 21ab474aca07..4060c0bd9785 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -436,10 +436,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) return -ENOMEM; /* export host's Ethernet address in CDC format */ - snprintf(geth->ethaddr, sizeof geth->ethaddr, - "%02X%02X%02X%02X%02X%02X", - ethaddr[0], ethaddr[1], ethaddr[2], - ethaddr[3], ethaddr[4], ethaddr[5]); + snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr); geth_string_defs[1].s = geth->ethaddr; geth->port.cdc_filter = DEFAULT_FILTER; diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index e7cc4de93e33..d3c6cffccb72 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -463,7 +463,7 @@ snd_fail: return err; } -static int __devexit snd_uac2_remove(struct platform_device *pdev) +static int snd_uac2_remove(struct platform_device *pdev) { struct snd_card *card = platform_get_drvdata(pdev); diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index a896d73f7a93..3f7d640b6758 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -251,26 +251,12 @@ #include <linux/freezer.h> #include <linux/utsname.h> +#include <linux/usb/composite.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include "gadget_chips.h" - - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - -/*-------------------------------------------------------------------------*/ - #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" #define DRIVER_VERSION "1 September 2010" @@ -3213,7 +3199,6 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) static int __init check_parameters(struct fsg_dev *fsg) { int prot; - int gcnum; /* Store the default values */ mod_data.transport_type = USB_PR_BULK; @@ -3228,16 +3213,8 @@ static int __init check_parameters(struct fsg_dev *fsg) if (gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; - if (mod_data.release == 0xffff) { // Parameter wasn't set - gcnum = usb_gadget_controller_number(fsg->gadget); - if (gcnum >= 0) - mod_data.release = 0x0300 + gcnum; - else { - WARNING(fsg, "controller '%s' not recognized\n", - fsg->gadget->name); - mod_data.release = 0x0399; - } - } + if (mod_data.release == 0xffff) + mod_data.release = get_default_bcdDevice(); prot = simple_strtol(mod_data.protocol_parm, NULL, 0); @@ -3331,7 +3308,8 @@ static int __init check_parameters(struct fsg_dev *fsg) } -static int __init fsg_bind(struct usb_gadget *gadget) +static int __init fsg_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { struct fsg_dev *fsg = the_fsg; int rc; @@ -3603,9 +3581,10 @@ static void fsg_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ -static struct usb_gadget_driver fsg_driver = { +static __refdata struct usb_gadget_driver fsg_driver = { .max_speed = USB_SPEED_SUPER, .function = (char *) fsg_string_product, + .bind = fsg_bind, .unbind = fsg_unbind, .disconnect = fsg_disconnect, .setup = fsg_setup, @@ -3653,7 +3632,8 @@ static int __init fsg_init(void) if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; - if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) + rc = usb_gadget_probe_driver(&fsg_driver); + if (rc != 0) kref_put(&fsg->ref, fsg_release); return rc; } diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 3def828f85e7..6ae70cba0c4a 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1255,7 +1255,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on) } static int fsl_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int fsl_stop(struct usb_gadget_driver *driver); /* defined in gadget.h */ static struct usb_gadget_ops fsl_gadget_ops = { @@ -1951,7 +1951,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) * Called by initialization code of gadget drivers *----------------------------------------------------------------*/ static int fsl_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { int retval = -ENODEV; unsigned long flags = 0; @@ -1976,7 +1976,7 @@ static int fsl_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc_controller->lock, flags); /* bind udc driver to gadget driver */ - retval = bind(&udc_controller->gadget); + retval = bind(&udc_controller->gadget, driver); if (retval) { VDBG("bind to %s --> %d", driver->driver.name, retval); udc_controller->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index cdd94540e1cd..72cd5e6719db 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1311,7 +1311,7 @@ static void init_controller(struct fusb300 *fusb300) static struct fusb300 *the_controller; static int fusb300_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct fusb300 *fusb300 = the_controller; int retval; @@ -1339,7 +1339,7 @@ static int fusb300_udc_start(struct usb_gadget_driver *driver, goto error; } - retval = bind(&fusb300->gadget); + retval = bind(&fusb300->gadget, driver); if (retval) { pr_err("bind to driver error (%d)\n", retval); device_del(&fusb300->gadget.dev); diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index d3ace9002a6a..3953dd4d7186 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -13,7 +13,6 @@ #define pr_fmt(fmt) "g_ffs: " fmt #include <linux/module.h> -#include <linux/utsname.h> /* * kbuild is not very cooperative with respect to linking separately @@ -22,12 +21,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS # if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS @@ -76,6 +69,8 @@ struct gfs_ffs_obj { struct ffs_data *ffs_data; }; +USB_GADGET_COMPOSITE_OPTIONS(); + static struct usb_device_descriptor gfs_dev_desc = { .bLength = sizeof gfs_dev_desc, .bDescriptorType = USB_DT_DEVICE, @@ -117,6 +112,9 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = { /* String IDs are assigned dynamically */ static struct usb_string gfs_strings[] = { + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", #ifdef CONFIG_USB_FUNCTIONFS_RNDIS { .s = "FunctionFS + RNDIS" }, #endif @@ -163,13 +161,13 @@ static int gfs_bind(struct usb_composite_dev *cdev); static int gfs_unbind(struct usb_composite_dev *cdev); static int gfs_do_config(struct usb_configuration *c); -static struct usb_composite_driver gfs_driver = { +static __refdata struct usb_composite_driver gfs_driver = { .name = DRIVER_NAME, .dev = &gfs_dev_desc, .strings = gfs_dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = gfs_bind, .unbind = gfs_unbind, - .iProduct = DRIVER_DESC, }; static DEFINE_MUTEX(gfs_lock); @@ -268,7 +266,7 @@ static int functionfs_ready_callback(struct ffs_data *ffs) } gfs_registered = true; - ret = usb_composite_probe(&gfs_driver, gfs_bind); + ret = usb_composite_probe(&gfs_driver); if (unlikely(ret < 0)) gfs_registered = false; @@ -357,6 +355,7 @@ static int gfs_bind(struct usb_composite_dev *cdev) ret = usb_string_ids_tab(cdev, gfs_strings); if (unlikely(ret < 0)) goto error; + gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id; for (i = func_num; --i; ) { ret = functionfs_bind(ffs_tab[i].ffs_data, cdev); @@ -369,9 +368,10 @@ static int gfs_bind(struct usb_composite_dev *cdev) for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) { struct gfs_configuration *c = gfs_configurations + i; + int sid = USB_GADGET_FIRST_AVAIL_IDX + i; - c->c.label = gfs_strings[i].s; - c->c.iConfiguration = gfs_strings[i].id; + c->c.label = gfs_strings[sid].s; + c->c.iConfiguration = gfs_strings[sid].id; c->c.bConfigurationValue = 1 + i; c->c.bmAttributes = USB_CONFIG_ATT_SELFPOWER; @@ -379,7 +379,7 @@ static int gfs_bind(struct usb_composite_dev *cdev) if (unlikely(ret < 0)) goto error_unbind; } - + usb_composite_overwrite_options(cdev, &coverwrite); return 0; error_unbind: diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index b8b3a3411218..bcd04bc66b98 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -15,6 +15,8 @@ #ifndef __GADGET_CHIPS_H #define __GADGET_CHIPS_H +#include <linux/usb/gadget.h> + /* * NOTICE: the entries below are alphabetical and should be kept * that way. @@ -25,106 +27,12 @@ * If you have forgotten the alphabetical order let VIM/EMACS * do that for you. */ -#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name)) #define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name)) -#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name)) -#define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) -#define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) -#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) -#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) -#define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) -#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) -#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) -#define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) -#define gadget_is_lpc32xx(g) (!strcmp("lpc32xx_udc", (g)->name)) -#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) -#define gadget_is_net2272(g) (!strcmp("net2272", (g)->name)) #define gadget_is_net2280(g) (!strcmp("net2280", (g)->name)) -#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name)) -#define gadget_is_pch(g) (!strcmp("pch_udc", (g)->name)) #define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name)) #define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name)) -#define gadget_is_r8a66597(g) (!strcmp("r8a66597_udc", (g)->name)) -#define gadget_is_renesas_usbhs(g) (!strcmp("renesas_usbhs_udc", (g)->name)) -#define gadget_is_s3c2410(g) (!strcmp("s3c2410_udc", (g)->name)) -#define gadget_is_s3c_hsotg(g) (!strcmp("s3c-hsotg", (g)->name)) -#define gadget_is_s3c_hsudc(g) (!strcmp("s3c-hsudc", (g)->name)) - -/** - * usb_gadget_controller_number - support bcdDevice id convention - * @gadget: the controller being driven - * - * Return a 2-digit BCD value associated with the peripheral controller, - * suitable for use as part of a bcdDevice value, or a negative error code. - * - * NOTE: this convention is purely optional, and has no meaning in terms of - * any USB specification. If you want to use a different convention in your - * gadget driver firmware -- maybe a more formal revision ID -- feel free. - * - * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!) - * to change their behavior accordingly. For example it might help avoiding - * some chip bug. - */ -static inline int usb_gadget_controller_number(struct usb_gadget *gadget) -{ - if (gadget_is_net2280(gadget)) - return 0x01; - else if (gadget_is_dummy(gadget)) - return 0x02; - else if (gadget_is_pxa(gadget)) - return 0x03; - else if (gadget_is_goku(gadget)) - return 0x06; - else if (gadget_is_omap(gadget)) - return 0x08; - else if (gadget_is_pxa27x(gadget)) - return 0x11; - else if (gadget_is_s3c2410(gadget)) - return 0x12; - else if (gadget_is_at91(gadget)) - return 0x13; - else if (gadget_is_imx(gadget)) - return 0x14; - else if (gadget_is_musbhdrc(gadget)) - return 0x16; - else if (gadget_is_atmel_usba(gadget)) - return 0x18; - else if (gadget_is_fsl_usb2(gadget)) - return 0x19; - else if (gadget_is_amd5536udc(gadget)) - return 0x20; - else if (gadget_is_m66592(gadget)) - return 0x21; - else if (gadget_is_fsl_qe(gadget)) - return 0x22; - else if (gadget_is_ci13xxx_pci(gadget)) - return 0x23; - else if (gadget_is_langwell(gadget)) - return 0x24; - else if (gadget_is_r8a66597(gadget)) - return 0x25; - else if (gadget_is_s3c_hsotg(gadget)) - return 0x26; - else if (gadget_is_pch(gadget)) - return 0x27; - else if (gadget_is_ci13xxx_msm(gadget)) - return 0x28; - else if (gadget_is_renesas_usbhs(gadget)) - return 0x29; - else if (gadget_is_s3c_hsudc(gadget)) - return 0x30; - else if (gadget_is_net2272(gadget)) - return 0x31; - else if (gadget_is_dwc3(gadget)) - return 0x32; - else if (gadget_is_lpc32xx(gadget)) - return 0x33; - - return -ENOENT; -} - /** * gadget_supports_altsettings - return true if altsettings work diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 681bd038b1d8..881aab86ae99 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/utsname.h> #include <linux/module.h> #include <linux/device.h> @@ -31,16 +30,13 @@ #include <sound/rawmidi.h> #include <linux/usb/ch9.h> +#include <linux/usb/composite.h> #include <linux/usb/gadget.h> #include <linux/usb/audio.h> #include <linux/usb/midi.h> #include "gadget_chips.h" -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "f_midi.c" /*-------------------------------------------------------------------------*/ @@ -51,6 +47,8 @@ MODULE_LICENSE("GPL v2"); static const char shortname[] = "g_midi"; static const char longname[] = "MIDI Gadget"; +USB_GADGET_COMPOSITE_OPTIONS(); + static int index = SNDRV_DEFAULT_IDX1; module_param(index, int, S_IRUGO); MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); @@ -85,9 +83,7 @@ MODULE_PARM_DESC(out_ports, "Number of MIDI output ports"); /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static struct usb_device_descriptor device_desc = { .bLength = USB_DT_DEVICE_SIZE, @@ -102,8 +98,9 @@ static struct usb_device_descriptor device_desc = { }; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = "Grey Innovation", - [STRING_PRODUCT_IDX].s = "MIDI Gadget", + [USB_GADGET_MANUFACTURER_IDX].s = "Grey Innovation", + [USB_GADGET_PRODUCT_IDX].s = "MIDI Gadget", + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = "MIDI", { } /* end of list */ }; @@ -140,61 +137,35 @@ static int __init midi_bind_config(struct usb_configuration *c) static int __init midi_bind(struct usb_composite_dev *cdev) { - struct usb_gadget *gadget = cdev->gadget; - int gcnum, status; - - status = usb_string_id(cdev); - if (status < 0) - return status; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; + int status; - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) return status; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; - - /* config description */ - status = usb_string_id(cdev); - if (status < 0) - return status; - strings_dev[STRING_DESCRIPTION_IDX].id = status; - - midi_config.iConfiguration = status; - - gcnum = usb_gadget_controller_number(gadget); - if (gcnum < 0) { - /* gmidi is so simple (no altsettings) that - * it SHOULD NOT have problems with bulk-capable hardware. - * so warn about unrecognized controllers, don't panic. - */ - pr_warning("%s: controller '%s' not recognized\n", - __func__, gadget->name); - device_desc.bcdDevice = cpu_to_le16(0x9999); - } else { - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - } + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id; status = usb_add_config(cdev, &midi_config, midi_bind_config); if (status < 0) return status; - + usb_composite_overwrite_options(cdev, &coverwrite); pr_info("%s\n", longname); return 0; } -static struct usb_composite_driver midi_driver = { +static __refdata struct usb_composite_driver midi_driver = { .name = (char *) longname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = midi_bind, .unbind = __exit_p(midi_unbind), }; static int __init midi_init(void) { - return usb_composite_probe(&midi_driver, midi_bind); + return usb_composite_probe(&midi_driver); } module_init(midi_init); diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 9fd7886cfa9a..51037cb78604 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -994,7 +994,7 @@ static int goku_get_frame(struct usb_gadget *_gadget) } static int goku_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int goku_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops goku_ops = { @@ -1348,7 +1348,7 @@ static struct goku_udc *the_controller; * the driver might get unbound. */ static int goku_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct goku_udc *dev = the_controller; int retval; @@ -1368,7 +1368,7 @@ static int goku_start(struct usb_gadget_driver *driver, driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); if (retval) { DBG(dev, "bind to driver %s --> error %d\n", driver->driver.name, retval); diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 3493adf064f5..74130f6c12c0 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -15,7 +15,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/list.h> +#include <linux/module.h> +#include <linux/usb/composite.h> +#include "gadget_chips.h" #define DRIVER_DESC "HID Gadget" #define DRIVER_VERSION "2010/03/16" @@ -33,12 +36,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_hid.c" @@ -50,6 +47,7 @@ struct hidg_func_node { static LIST_HEAD(hidg_func_list); /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -92,15 +90,10 @@ static const struct usb_descriptor_header *otg_desc[] = { /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -150,7 +143,7 @@ static int __init hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; - int status, gcnum, funcs = 0; + int status, funcs = 0; list_for_each(tmp, &hidg_func_list) funcs++; @@ -163,38 +156,22 @@ static int __init hid_bind(struct usb_composite_dev *cdev) if (status < 0) return status; - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else - device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099); - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - return status; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) return status; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &config_driver, do_config); if (status < 0) return status; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); return 0; @@ -242,11 +219,12 @@ static int __devexit hidg_plat_driver_remove(struct platform_device *pdev) /****************************** Some noise ******************************/ -static struct usb_composite_driver hidg_driver = { +static __refdata struct usb_composite_driver hidg_driver = { .name = "g_hid", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = hid_bind, .unbind = __exit_p(hid_unbind), }; @@ -272,7 +250,7 @@ static int __init hidg_init(void) if (status < 0) return status; - status = usb_composite_probe(&hidg_driver, hid_bind); + status = usb_composite_probe(&hidg_driver); if (status < 0) platform_driver_unregister(&hidg_plat_driver); diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index dc5334856afe..a0eb85794fd4 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -35,7 +35,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <mach/usb.h> +#include <linux/platform_data/usb-imx_udc.h> #include <mach/hardware.h> #include "imx_udc.h" diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index e58b16442971..4bb6d53f2de3 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -828,7 +828,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (value == 0) data->state = STATE_EP_ENABLED; break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_SPEED_HIGH: /* fails if caller didn't provide that descriptor... */ ep->desc = &data->hs_desc; @@ -836,7 +835,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (value == 0) data->state = STATE_EP_ENABLED; break; -#endif default: DBG(data->dev, "unconnected, %s init abandoned\n", data->name); @@ -1324,7 +1322,6 @@ static const struct file_operations ep0_io_operations = { * Unrecognized ep0 requests may be handled in user space. */ -#ifdef CONFIG_USB_GADGET_DUALSPEED static void make_qualifier (struct dev_data *dev) { struct usb_qualifier_descriptor qual; @@ -1347,7 +1344,6 @@ static void make_qualifier (struct dev_data *dev) memcpy (dev->rbuf, &qual, sizeof qual); } -#endif static int config_buf (struct dev_data *dev, u8 type, unsigned index) @@ -1427,7 +1423,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket; req->buf = dev->dev; break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: if (!dev->hs_config) break; @@ -1437,7 +1432,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) break; case USB_DT_OTHER_SPEED_CONFIG: // FALLTHROUGH -#endif case USB_DT_CONFIG: value = config_buf (dev, w_value >> 8, @@ -1685,8 +1679,8 @@ gadgetfs_unbind (struct usb_gadget *gadget) static struct dev_data *the_device; -static int -gadgetfs_bind (struct usb_gadget *gadget) +static int gadgetfs_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { struct dev_data *dev = the_device; @@ -1763,12 +1757,8 @@ gadgetfs_suspend (struct usb_gadget *gadget) } static struct usb_gadget_driver gadgetfs_driver = { -#ifdef CONFIG_USB_GADGET_DUALSPEED - .max_speed = USB_SPEED_HIGH, -#else - .max_speed = USB_SPEED_FULL, -#endif .function = (char *) driver_desc, + .bind = gadgetfs_bind, .unbind = gadgetfs_unbind, .setup = gadgetfs_setup, .disconnect = gadgetfs_disconnect, @@ -1783,7 +1773,8 @@ static struct usb_gadget_driver gadgetfs_driver = { static void gadgetfs_nop(struct usb_gadget *arg) { } -static int gadgetfs_probe (struct usb_gadget *gadget) +static int gadgetfs_probe(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { CHIP = gadget->name; return -EISNAM; @@ -1791,6 +1782,7 @@ static int gadgetfs_probe (struct usb_gadget *gadget) static struct usb_gadget_driver probe_driver = { .max_speed = USB_SPEED_HIGH, + .bind = gadgetfs_probe, .unbind = gadgetfs_nop, .setup = (void *)gadgetfs_nop, .disconnect = gadgetfs_nop, @@ -1900,7 +1892,12 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* triggers gadgetfs_bind(); then we can enumerate. */ spin_unlock_irq (&dev->lock); - value = usb_gadget_probe_driver(&gadgetfs_driver, gadgetfs_bind); + if (dev->hs_config) + gadgetfs_driver.max_speed = USB_SPEED_HIGH; + else + gadgetfs_driver.max_speed = USB_SPEED_FULL; + + value = usb_gadget_probe_driver(&gadgetfs_driver); if (value != 0) { kfree (dev->buf); dev->buf = NULL; @@ -2039,7 +2036,7 @@ gadgetfs_fill_super (struct super_block *sb, void *opts, int silent) return -ESRCH; /* fake probe to determine $CHIP */ - (void) usb_gadget_probe_driver(&probe_driver, gadgetfs_probe); + usb_gadget_probe_driver(&probe_driver); if (!CHIP) return -ENODEV; diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index f1ec99e69cb7..f696fb9b136d 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -141,8 +141,6 @@ struct lpc32xx_ep { u32 totalints; bool wedge; - - const struct usb_endpoint_descriptor *desc; }; /* @@ -556,10 +554,8 @@ static int proc_udc_show(struct seq_file *s, void *unused) if (udc->enabled && udc->vbus) { proc_ep_show(s, &udc->ep[0]); - list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) - proc_ep_show(s, ep); - } + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) + proc_ep_show(s, ep); } spin_unlock_irqrestore(&udc->lock, flags); @@ -1453,7 +1449,6 @@ static void udc_reinit(struct lpc32xx_udc *udc) if (i != 0) list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); - ep->desc = NULL; ep->ep.maxpacket = ep->maxpacket; INIT_LIST_HEAD(&ep->queue); ep->req_pending = 0; @@ -1515,7 +1510,7 @@ static void nuke(struct lpc32xx_ep *ep, int status) done(ep, req, status); } - if (ep->desc && status == -ESHUTDOWN) { + if (status == -ESHUTDOWN) { uda_disable_hwepint(ep->udc, ep->hwep_num); udc_disable_hwep(ep->udc, ep->hwep_num); } @@ -1658,9 +1653,6 @@ static int lpc32xx_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); - /* restore the endpoint's pristine config */ - ep->desc = NULL; - /* Clear all DMA statuses for this EP */ udc_ep_dma_disable(udc, ep->hwep_num); writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); @@ -1696,7 +1688,7 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, unsigned long flags; /* Verify EP data */ - if ((!_ep) || (!ep) || (!desc) || (ep->desc) || + if ((!_ep) || (!ep) || (!desc) || (desc->bDescriptorType != USB_DT_ENDPOINT)) { dev_dbg(udc->dev, "bad ep or descriptor\n"); return -EINVAL; @@ -1754,7 +1746,6 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, /* Initialize endpoint to match the selected descriptor */ ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0; - ep->desc = desc; ep->ep.maxpacket = maxpacket; /* Map hardware endpoint from base and direction */ @@ -1837,7 +1828,7 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep, udc = ep->udc; - if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) { + if (!_ep) { dev_dbg(udc->dev, "invalid ep\n"); return -EINVAL; } @@ -1976,7 +1967,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) struct lpc32xx_udc *udc = ep->udc; unsigned long flags; - if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1)) + if ((!ep) || (ep->hwep_num <= 1)) return -EINVAL; /* Don't halt an IN EP */ @@ -2262,7 +2253,7 @@ static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex) case USB_RECIP_ENDPOINT: tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; ep = &udc->ep[tmp]; - if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc)) + if ((tmp == 0) || (tmp >= NUM_ENDPOINTS)) return -EOPNOTSUPP; if (wIndex & USB_DIR_IN) { @@ -2599,9 +2590,8 @@ static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on) return 0; } -static int lpc32xx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int lpc32xx_stop(struct usb_gadget_driver *driver); +static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *); +static int lpc32xx_stop(struct usb_gadget *, struct usb_gadget_driver *); static const struct usb_gadget_ops lpc32xx_udc_ops = { .get_frame = lpc32xx_get_frame, @@ -2609,8 +2599,8 @@ static const struct usb_gadget_ops lpc32xx_udc_ops = { .set_selfpowered = lpc32xx_set_selfpowered, .vbus_session = lpc32xx_vbus_session, .pullup = lpc32xx_pullup, - .start = lpc32xx_start, - .stop = lpc32xx_stop, + .udc_start = lpc32xx_start, + .udc_stop = lpc32xx_stop, }; static void nop_release(struct device *dev) @@ -2618,10 +2608,9 @@ static void nop_release(struct device *dev) /* nothing to free */ } -static struct lpc32xx_udc controller = { +static const struct lpc32xx_udc controller_template = { .gadget = { .ops = &lpc32xx_udc_ops, - .ep0 = &controller.ep[0].ep, .name = driver_name, .dev = { .init_name = "gadget", @@ -2633,7 +2622,6 @@ static struct lpc32xx_udc controller = { .name = "ep0", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 0, .hwep_num = 0, /* Can be 0 or 1, has special handling */ @@ -2645,7 +2633,6 @@ static struct lpc32xx_udc controller = { .name = "ep1-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 2, .hwep_num = 0, /* 2 or 3, will be set later */ @@ -2657,7 +2644,6 @@ static struct lpc32xx_udc controller = { .name = "ep2-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 4, .hwep_num = 0, /* 4 or 5, will be set later */ @@ -2669,7 +2655,6 @@ static struct lpc32xx_udc controller = { .name = "ep3-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 6, .hwep_num = 0, /* 6 or 7, will be set later */ @@ -2681,7 +2666,6 @@ static struct lpc32xx_udc controller = { .name = "ep4-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 8, .hwep_num = 0, /* 8 or 9, will be set later */ @@ -2693,7 +2677,6 @@ static struct lpc32xx_udc controller = { .name = "ep5-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 10, .hwep_num = 0, /* 10 or 11, will be set later */ @@ -2705,7 +2688,6 @@ static struct lpc32xx_udc controller = { .name = "ep6-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 12, .hwep_num = 0, /* 12 or 13, will be set later */ @@ -2717,7 +2699,6 @@ static struct lpc32xx_udc controller = { .name = "ep7-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 14, .hwep_num = 0, @@ -2729,7 +2710,6 @@ static struct lpc32xx_udc controller = { .name = "ep8-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 16, .hwep_num = 0, @@ -2741,7 +2721,6 @@ static struct lpc32xx_udc controller = { .name = "ep9-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 18, .hwep_num = 0, @@ -2753,7 +2732,6 @@ static struct lpc32xx_udc controller = { .name = "ep10-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 20, .hwep_num = 0, @@ -2765,7 +2743,6 @@ static struct lpc32xx_udc controller = { .name = "ep11-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 22, .hwep_num = 0, @@ -2777,7 +2754,6 @@ static struct lpc32xx_udc controller = { .name = "ep12-iso", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 24, .hwep_num = 0, @@ -2789,7 +2765,6 @@ static struct lpc32xx_udc controller = { .name = "ep13-int", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 26, .hwep_num = 0, @@ -2801,7 +2776,6 @@ static struct lpc32xx_udc controller = { .name = "ep14-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 64, .hwep_num_base = 28, .hwep_num = 0, @@ -2813,7 +2787,6 @@ static struct lpc32xx_udc controller = { .name = "ep15-bulk", .ops = &lpc32xx_ep_ops, }, - .udc = &controller, .maxpacket = 1023, .hwep_num_base = 30, .hwep_num = 0, @@ -2987,14 +2960,13 @@ static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc) return IRQ_HANDLED; } -static int lpc32xx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int lpc32xx_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct lpc32xx_udc *udc = &controller; - int retval, i; + struct lpc32xx_udc *udc = to_udc(gadget); + int i; - if (!driver || driver->max_speed < USB_SPEED_FULL || - !bind || !driver->setup) { + if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) { dev_err(udc->dev, "bad parameter.\n"); return -EINVAL; } @@ -3011,18 +2983,6 @@ static int lpc32xx_start(struct usb_gadget_driver *driver, udc->selfpowered = 1; udc->vbus = 0; - retval = bind(&udc->gadget); - if (retval) { - dev_err(udc->dev, "bind() returned %d\n", retval); - udc->enabled = 0; - udc->selfpowered = 0; - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - return retval; - } - - dev_dbg(udc->dev, "bound to %s\n", driver->driver.name); - /* Force VBUS process once to check for cable insertion */ udc->last_vbus = udc->vbus = 0; schedule_work(&udc->vbus_job); @@ -3034,22 +2994,19 @@ static int lpc32xx_start(struct usb_gadget_driver *driver, return 0; } -static int lpc32xx_stop(struct usb_gadget_driver *driver) +static int lpc32xx_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { int i; - struct lpc32xx_udc *udc = &controller; + struct lpc32xx_udc *udc = to_udc(gadget); - if (!driver || driver != udc->driver || !driver->unbind) + if (!driver || driver != udc->driver) return -EINVAL; - /* Disable USB pullup */ - isp1301_pullup_enable(udc, 0, 1); - for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) disable_irq(udc->udp_irq[i]); if (udc->clocked) { - spin_lock(&udc->lock); stop_activity(udc); spin_unlock(&udc->lock); @@ -3069,20 +3026,16 @@ static int lpc32xx_stop(struct usb_gadget_driver *driver) } udc->enabled = 0; - pullup(udc, 0); - - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; - dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name); return 0; } static void lpc32xx_udc_shutdown(struct platform_device *dev) { /* Force disconnect on reboot */ - struct lpc32xx_udc *udc = &controller; + struct lpc32xx_udc *udc = platform_get_drvdata(dev); pullup(udc, 0); } @@ -3120,12 +3073,21 @@ static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F; static int __init lpc32xx_udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct lpc32xx_udc *udc = &controller; + struct lpc32xx_udc *udc; int retval, i; struct resource *res; dma_addr_t dma_handle; struct device_node *isp1301_node; + udc = kzalloc(sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + memcpy(udc, &controller_template, sizeof(*udc)); + for (i = 0; i <= 15; i++) + udc->ep[i].udc = udc; + udc->gadget.ep0 = &udc->ep[0].ep; + /* init software state */ udc->gadget.dev.parent = dev; udc->pdev = pdev; @@ -3140,8 +3102,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) } udc->isp1301_i2c_client = isp1301_get_client(isp1301_node); - if (!udc->isp1301_i2c_client) - return -EPROBE_DEFER; + if (!udc->isp1301_i2c_client) { + retval = -EPROBE_DEFER; + goto phy_fail; + } dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n", udc->isp1301_i2c_client->addr); @@ -3160,8 +3124,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) * IORESOURCE_IRQ, USB transceiver interrupt number */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; + if (!res) { + retval = -ENXIO; + goto resource_fail; + } spin_lock_init(&udc->lock); @@ -3171,7 +3137,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) if (udc->udp_irq[i] < 0) { dev_err(udc->dev, "irq resource %d not available!\n", i); - return udc->udp_irq[i]; + retval = udc->udp_irq[i]; + goto irq_fail; } } @@ -3179,7 +3146,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->io_p_size = resource_size(res); if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) { dev_err(udc->dev, "someone's using UDC memory\n"); - return -EBUSY; + retval = -EBUSY; + goto request_mem_region_fail; } udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size); @@ -3208,7 +3176,7 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); if (IS_ERR(udc->usb_otg_clk)) { dev_err(udc->dev, "failed to acquire USB otg clock\n"); - retval = PTR_ERR(udc->usb_slv_clk); + retval = PTR_ERR(udc->usb_otg_clk); goto usb_otg_clk_get_fail; } @@ -3376,7 +3344,11 @@ pll_get_fail: io_map_fail: release_mem_region(udc->io_p_start, udc->io_p_size); dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval); - +request_mem_region_fail: +irq_fail: +resource_fail: +phy_fail: + kfree(udc); return retval; } @@ -3414,6 +3386,7 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) clk_put(udc->usb_pll_clk); iounmap(udc->udp_baseaddr); release_mem_region(udc->io_p_start, udc->io_p_size); + kfree(udc); return 0; } diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index cf6bd626f3fe..b6401f1b56ce 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1466,7 +1466,7 @@ static struct usb_ep_ops m66592_ep_ops = { static struct m66592 *the_controller; static int m66592_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct m66592 *m66592 = the_controller; int retval; @@ -1492,7 +1492,7 @@ static int m66592_start(struct usb_gadget_driver *driver, goto error; } - retval = bind(&m66592->gadget); + retval = bind(&m66592->gadget, driver); if (retval) { pr_err("bind to driver error (%d)\n", retval); device_del(&m66592->gadget.dev); diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 1f376eba31f6..080e577773d5 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -29,9 +29,8 @@ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/usb/ch9.h> - +#include <linux/module.h> /*-------------------------------------------------------------------------*/ @@ -47,14 +46,10 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" #include "f_mass_storage.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor msg_device_desc = { .bLength = sizeof msg_device_desc, @@ -85,6 +80,22 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; +static struct usb_string strings_dev[] = { + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab_dev = { + .language = 0x0409, /* en-us */ + .strings = strings_dev, +}; + +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; /****************************** Configurations ******************************/ @@ -143,10 +154,15 @@ static int __init msg_bind(struct usb_composite_dev *cdev) { int status; - status = usb_add_config(cdev, &msg_config_driver, msg_do_config); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) return status; + msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + status = usb_add_config(cdev, &msg_config_driver, msg_do_config); + if (status < 0) + return status; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&cdev->gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); set_bit(0, &msg_registered); @@ -156,12 +172,13 @@ static int __init msg_bind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static struct usb_composite_driver msg_driver = { +static __refdata struct usb_composite_driver msg_driver = { .name = "g_mass_storage", .dev = &msg_device_desc, - .iProduct = DRIVER_DESC, .max_speed = USB_SPEED_SUPER, .needs_serial = 1, + .strings = dev_strings, + .bind = msg_bind, }; MODULE_DESCRIPTION(DRIVER_DESC); @@ -170,7 +187,7 @@ MODULE_LICENSE("GPL"); static int __init msg_init(void) { - return usb_composite_probe(&msg_driver, msg_bind); + return usb_composite_probe(&msg_driver); } module_init(msg_init); diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index c37fb33a3d1b..88472bf7dbb7 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -14,10 +14,8 @@ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/module.h> - #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif @@ -42,12 +40,6 @@ MODULE_LICENSE("GPL"); * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_mass_storage.c" #include "u_serial.c" @@ -61,7 +53,7 @@ MODULE_LICENSE("GPL"); #endif #include "u_ether.c" - +USB_GADGET_COMPOSITE_OPTIONS(); /***************************** Device Descriptor ****************************/ @@ -112,21 +104,16 @@ static const struct usb_descriptor_header *otg_desc[] = { enum { -#ifdef CONFIG_USB_G_MULTI_RNDIS - MULTI_STRING_RNDIS_CONFIG_IDX, -#endif -#ifdef CONFIG_USB_G_MULTI_CDC + MULTI_STRING_RNDIS_CONFIG_IDX = USB_GADGET_FIRST_AVAIL_IDX, MULTI_STRING_CDC_CONFIG_IDX, -#endif }; static struct usb_string strings_dev[] = { -#ifdef CONFIG_USB_G_MULTI_RNDIS + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS", -#endif -#ifdef CONFIG_USB_G_MULTI_CDC [MULTI_STRING_CDC_CONFIG_IDX].s = "Multifunction with CDC ECM", -#endif { } /* end of list */ }; @@ -260,7 +247,7 @@ static int cdc_config_register(struct usb_composite_dev *cdev) static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; - int status, gcnum; + int status; if (!can_support_ecm(cdev->gadget)) { dev_err(&gadget->dev, "controller '%s' not usable\n", @@ -288,19 +275,11 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) } } - /* set bcdDevice */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - } else { - WARNING(cdev, "controller '%s' not recognized\n", gadget->name); - device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099); - } - /* allocate string IDs */ status = usb_string_ids_tab(cdev, strings_dev); if (unlikely(status < 0)) goto fail2; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register configurations */ status = rndis_config_register(cdev); @@ -310,6 +289,7 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) status = cdc_config_register(cdev); if (unlikely(status < 0)) goto fail2; + usb_composite_overwrite_options(cdev, &coverwrite); /* we're done */ dev_info(&gadget->dev, DRIVER_DESC "\n"); @@ -338,20 +318,20 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static struct usb_composite_driver multi_driver = { +static __refdata struct usb_composite_driver multi_driver = { .name = "g_multi", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = multi_bind, .unbind = __exit_p(multi_unbind), - .iProduct = DRIVER_DESC, .needs_serial = 1, }; static int __init multi_init(void) { - return usb_composite_probe(&multi_driver, multi_bind); + return usb_composite_probe(&multi_driver); } module_init(multi_init); diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 75db2c306cea..ea45224f78c8 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -51,9 +51,8 @@ #define EPSTATUS_TIMEOUT 10000 #define PRIME_TIMEOUT 10000 #define READSAFE_TIMEOUT 1000 -#define DTD_TIMEOUT 1000 -#define LOOPS_USEC_SHIFT 4 +#define LOOPS_USEC_SHIFT 1 #define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) #define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) @@ -64,7 +63,6 @@ static const char driver_desc[] = DRIVER_DESC; /* controller device global variable */ static struct mv_udc *the_controller; -int mv_usb_otgsc; static void nuke(struct mv_ep *ep, int status); static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); @@ -357,17 +355,24 @@ done: return retval; } - static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, dma_addr_t *dma, int *is_last) { - u32 temp; struct mv_dtd *dtd; struct mv_udc *udc; + struct mv_dqh *dqh; + u32 temp, mult = 0; /* how big will this transfer be? */ - *length = min(req->req.length - req->req.actual, - (unsigned)EP_MAX_LENGTH_TRANSFER); + if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) { + dqh = req->ep->dqh; + mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS) + & 0x3; + *length = min(req->req.length - req->req.actual, + (unsigned)(mult * req->ep->ep.maxpacket)); + } else + *length = min(req->req.length - req->req.actual, + (unsigned)EP_MAX_LENGTH_TRANSFER); udc = req->ep->udc; @@ -375,7 +380,7 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, * Be careful that no _GFP_HIGHMEM is set, * or we can not use dma_to_virt */ - dtd = dma_pool_alloc(udc->dtd_pool, GFP_KERNEL, dma); + dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma); if (dtd == NULL) return dtd; @@ -409,6 +414,8 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, if (*is_last && !req->req.no_interrupt) temp |= DTD_IOC; + temp |= mult << 10; + dtd->size_ioc_sts = temp; mb(); @@ -708,6 +715,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) struct mv_req *req = container_of(_req, struct mv_req, req); struct mv_udc *udc = ep->udc; unsigned long flags; + int retval; /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf @@ -719,10 +727,6 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) dev_err(&udc->dev->dev, "%s, bad ep", __func__); return -EINVAL; } - if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - if (req->req.length > ep->ep.maxpacket) - return -EMSGSIZE; - } udc = ep->udc; if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) @@ -755,15 +759,17 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* build dtds and push them to device queue */ if (!req_to_dtd(req)) { - int retval; retval = queue_dtd(ep, req); if (retval) { spin_unlock_irqrestore(&udc->lock, flags); - return retval; + dev_err(&udc->dev->dev, "Failed to queue dtd\n"); + goto err_unmap_dma; } } else { spin_unlock_irqrestore(&udc->lock, flags); - return -ENOMEM; + dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n"); + retval = -ENOMEM; + goto err_unmap_dma; } /* Update ep0 state */ @@ -775,6 +781,22 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) spin_unlock_irqrestore(&udc->lock, flags); return 0; + +err_unmap_dma: + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ((ep_dir(ep) == EP_DIR_IN) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE)); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } else + dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ((ep_dir(ep) == EP_DIR_IN) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE)); + + return retval; } static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req) @@ -1065,7 +1087,7 @@ static int udc_reset(struct mv_udc *udc) tmp |= USBMODE_CTRL_MODE_DEVICE; /* turn setup lockout off, require setup tripwire in usbcmd */ - tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE; + tmp |= USBMODE_SETUP_LOCK_OFF; writel(tmp, &udc->op_regs->usbmode); @@ -1199,12 +1221,16 @@ static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) udc_start(udc); } } else if (udc->driver && udc->softconnect) { + if (!udc->active) + goto out; + /* stop all the transfer in queue*/ stop_activity(udc, udc->driver); udc_stop(udc); mv_udc_disable(udc); } +out: spin_unlock_irqrestore(&udc->lock, flags); return retval; } @@ -1243,7 +1269,7 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) } static int mv_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int mv_udc_stop(struct usb_gadget_driver *driver); /* device controller usb_gadget_ops structure */ static const struct usb_gadget_ops mv_ops = { @@ -1348,7 +1374,7 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver) } static int mv_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct mv_udc *udc = the_controller; int retval = 0; @@ -1373,7 +1399,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc->lock, flags); - retval = bind(&udc->gadget); + retval = bind(&udc->gadget, driver); if (retval) { dev_err(&udc->dev->dev, "bind to driver %s --> %d\n", driver->driver.name, retval); @@ -1499,15 +1525,17 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) } /* prime the data phase */ - if (!req_to_dtd(req)) + if (!req_to_dtd(req)) { retval = queue_dtd(ep, req); - else{ /* no mem */ + if (retval) { + dev_err(&udc->dev->dev, + "Failed to queue dtd when prime status\n"); + goto out; + } + } else{ /* no mem */ retval = -ENOMEM; - goto out; - } - - if (retval) { - dev_err(&udc->dev->dev, "response error on GET_STATUS request\n"); + dev_err(&udc->dev->dev, + "Failed to dma_pool_alloc when prime status\n"); goto out; } @@ -1515,6 +1543,15 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) return 0; out: + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ((ep_dir(ep) == EP_DIR_IN) ? + DMA_TO_DEVICE : DMA_FROM_DEVICE)); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } + return retval; } @@ -2468,9 +2505,11 @@ static void mv_udc_shutdown(struct platform_device *dev) u32 mode; /* reset controller mode to IDLE */ + mv_udc_enable(udc); mode = readl(&udc->op_regs->usbmode); mode &= ~3; writel(mode, &udc->op_regs->usbmode); + mv_udc_disable(udc); } static struct platform_driver udc_driver = { diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c index 89530034dff1..a22ad9af0565 100644 --- a/drivers/usb/gadget/ncm.c +++ b/drivers/usb/gadget/ncm.c @@ -20,8 +20,8 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> - +#include <linux/module.h> +#include <linux/usb/composite.h> #include "u_ether.h" @@ -36,11 +36,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_ncm.c" #include "u_ether.c" @@ -57,6 +52,7 @@ #define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */ /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -97,17 +93,11 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; - /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 - -static char manufacturer[50]; - static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC, + [USB_GADGET_SERIAL_IDX].s = "", { } /* end of list */ }; @@ -149,7 +139,6 @@ static struct usb_configuration ncm_config_driver = { static int __init gncm_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -158,48 +147,22 @@ static int __init gncm_bind(struct usb_composite_dev *cdev) if (status < 0) return status; - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - dev_warn(&gadget->dev, - "controller '%s' not recognized; trying %s\n", - gadget->name, - ncm_config_driver.label); - device_desc.bcdDevice = - cpu_to_le16(0x0300 | 0x0099); - } - - /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - /* device descriptor strings: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; status = usb_add_config(cdev, &ncm_config_driver, ncm_do_config); if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s\n", DRIVER_DESC); return 0; @@ -215,11 +178,12 @@ static int __exit gncm_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver ncm_driver = { +static __refdata struct usb_composite_driver ncm_driver = { .name = "g_ncm", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = gncm_bind, .unbind = __exit_p(gncm_unbind), }; @@ -229,7 +193,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(&ncm_driver, gncm_bind); + return usb_composite_probe(&ncm_driver); } module_init(init); diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c index c7fb7723c014..661600abace8 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/nokia.c @@ -16,7 +16,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "u_serial.h" @@ -38,11 +37,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "u_serial.c" #include "f_acm.c" #include "f_ecm.c" @@ -52,23 +46,23 @@ #include "u_ether.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); #define NOKIA_VENDOR_ID 0x0421 /* Nokia */ #define NOKIA_PRODUCT_ID 0x01c8 /* Nokia Gadget */ /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static char manufacturer_nokia[] = "Nokia"; static const char product_nokia[] = NOKIA_LONG_NAME; static const char description_nokia[] = "PC-Suite Configuration"; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer_nokia, - [STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME, + [USB_GADGET_MANUFACTURER_IDX].s = manufacturer_nokia, + [USB_GADGET_PRODUCT_IDX].s = NOKIA_LONG_NAME, + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = description_nokia, { } /* end of list */ }; @@ -90,6 +84,7 @@ static struct usb_device_descriptor device_desc = { .bDeviceClass = USB_CLASS_COMM, .idVendor = __constant_cpu_to_le16(NOKIA_VENDOR_ID), .idProduct = __constant_cpu_to_le16(NOKIA_PRODUCT_ID), + .bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM), /* .iManufacturer = DYNAMIC */ /* .iProduct = DYNAMIC */ .bNumConfigurations = 1, @@ -151,7 +146,6 @@ static struct usb_configuration nokia_config_100ma_driver = { static int __init nokia_bind(struct usb_composite_dev *cdev) { - int gcnum; struct usb_gadget *gadget = cdev->gadget; int status; @@ -167,41 +161,17 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) if (status < 0) goto err_ether; - status = usb_string_id(cdev); - if (status < 0) - goto err_usb; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto err_usb; - strings_dev[STRING_PRODUCT_IDX].id = status; - - device_desc.iProduct = status; - - /* config description */ - status = usb_string_id(cdev); - if (status < 0) - goto err_usb; - strings_dev[STRING_DESCRIPTION_IDX].id = status; - + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + status = strings_dev[STRING_DESCRIPTION_IDX].id; nokia_config_500ma_driver.iConfiguration = status; nokia_config_100ma_driver.iConfiguration = status; - /* set up other descriptors */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM); - else { - /* this should only work with hw that supports altsettings - * and several endpoints, anything else, panic. - */ - pr_err("nokia_bind: controller '%s' not recognized\n", - gadget->name); + if (!gadget_supports_altsettings(gadget)) goto err_usb; - } /* finally register the configuration */ status = usb_add_config(cdev, &nokia_config_500ma_driver, @@ -214,6 +184,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) if (status < 0) goto err_usb; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME); return 0; @@ -237,17 +208,18 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver nokia_driver = { +static __refdata struct usb_composite_driver nokia_driver = { .name = "g_nokia", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = nokia_bind, .unbind = __exit_p(nokia_unbind), }; static int __init nokia_init(void) { - return usb_composite_probe(&nokia_driver, nokia_bind); + return usb_composite_probe(&nokia_driver); } module_init(nokia_init); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index f9132ada53b5..2a4749c3eb3f 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1308,7 +1308,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on) } static int omap_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int omap_udc_stop(struct usb_gadget_driver *driver); static struct usb_gadget_ops omap_gadget_ops = { @@ -2040,7 +2040,7 @@ static inline int machine_without_vbus_sense(void) } static int omap_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { int status = -ENODEV; struct omap_ep *ep; @@ -2082,7 +2082,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver, if (udc->dc_clk != NULL) omap_udc_enable_clock(1); - status = bind(&udc->gadget); + status = bind(&udc->gadget, driver); if (status) { DBG("bind to %s --> %d\n", driver->driver.name, status); udc->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index f4fb71c9ae08..6490c0040e3a 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -1236,7 +1236,7 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA) } static int pch_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int pch_udc_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops pch_udc_ops = { .get_frame = pch_udc_pcd_get_frame, @@ -2982,7 +2982,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) } static int pch_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct pch_udc_dev *dev = pch_udc; int retval; @@ -3006,7 +3006,7 @@ static int pch_udc_start(struct usb_gadget_driver *driver, dev->gadget.dev.driver = &driver->driver; /* Invoke the bind routine of the gadget driver */ - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); if (retval) { dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n", diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index f1f9290a2f47..e156e3f26727 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -22,7 +22,6 @@ #include <linux/timer.h> #include <linux/list.h> #include <linux/interrupt.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/moduleparam.h> #include <linux/fs.h> @@ -38,25 +37,13 @@ #include <asm/unaligned.h> #include <linux/usb/ch9.h> +#include <linux/usb/composite.h> #include <linux/usb/gadget.h> #include <linux/usb/g_printer.h> #include "gadget_chips.h" - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - -/*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_DESC "Printer Gadget" #define DRIVER_VERSION "2007 OCT 06" @@ -120,8 +107,7 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static char *iSerialNum; -module_param(iSerialNum, charp, S_IRUGO); +module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); static char *iPNPstring; @@ -141,18 +127,10 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); * descriptors are built on demand. */ -#define STRING_MANUFACTURER 1 -#define STRING_PRODUCT 2 -#define STRING_SERIALNUM 3 - /* holds our biggest descriptor */ #define USB_DESC_BUFSIZE 256 #define USB_BUFSIZE 8192 -/* This device advertises one configuration. */ -#define DEV_CONFIG_VALUE 1 -#define PRINTER_INTERFACE 0 - static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, @@ -162,16 +140,12 @@ static struct usb_device_descriptor device_desc = { .bDeviceProtocol = 0, .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM), .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM), - .iManufacturer = STRING_MANUFACTURER, - .iProduct = STRING_PRODUCT, - .iSerialNumber = STRING_SERIALNUM, .bNumConfigurations = 1 }; static struct usb_interface_descriptor intf_desc = { .bLength = sizeof intf_desc, .bDescriptorType = USB_DT_INTERFACE, - .bInterfaceNumber = PRINTER_INTERFACE, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_PRINTER, .bInterfaceSubClass = 1, /* Printer Sub-Class */ @@ -252,7 +226,6 @@ static const struct usb_descriptor_header *otg_desc[] = { /* descriptors that are built on-demand */ -static char manufacturer [50]; static char product_desc [40] = DRIVER_DESC; static char serial_num [40] = "1"; static char pnp_string [1024] = @@ -260,9 +233,9 @@ static char pnp_string [1024] = /* static strings, in UTF-8 */ static struct usb_string strings [] = { - { STRING_MANUFACTURER, manufacturer, }, - { STRING_PRODUCT, product_desc, }, - { STRING_SERIALNUM, serial_num, }, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = product_desc, + [USB_GADGET_SERIAL_IDX].s = serial_num, { } /* end of list */ }; @@ -871,25 +844,13 @@ static int set_interface(struct printer_dev *dev, unsigned number) int result = 0; /* Free the current interface */ - switch (dev->interface) { - case PRINTER_INTERFACE: - printer_reset_interface(dev); - break; - } + printer_reset_interface(dev); - switch (number) { - case PRINTER_INTERFACE: - result = set_printer_interface(dev); - if (result) { - printer_reset_interface(dev); - } else { - dev->interface = PRINTER_INTERFACE; - } - break; - default: - result = -EINVAL; - /* FALL THROUGH */ - } + result = set_printer_interface(dev); + if (result) + printer_reset_interface(dev); + else + dev->interface = number; if (!result) INFO(dev, "Using interface %x\n", number); @@ -972,7 +933,7 @@ static int printer_func_setup(struct usb_function *f, switch (ctrl->bRequest) { case 0: /* Get the IEEE-1284 PNP String */ /* Only one printer interface is supported. */ - if ((wIndex>>8) != PRINTER_INTERFACE) + if ((wIndex>>8) != dev->interface) break; value = (pnp_string[0]<<8)|pnp_string[1]; @@ -983,7 +944,7 @@ static int printer_func_setup(struct usb_function *f, case 1: /* Get Port Status */ /* Only one printer interface is supported. */ - if (wIndex != PRINTER_INTERFACE) + if (wIndex != dev->interface) break; *(u8 *)req->buf = dev->printer_status; @@ -992,7 +953,7 @@ static int printer_func_setup(struct usb_function *f, case 2: /* Soft Reset */ /* Only one printer interface is supported. */ - if (wIndex != PRINTER_INTERFACE) + if (wIndex != dev->interface) break; printer_soft_reset(dev); @@ -1020,6 +981,37 @@ unknown: static int __init printer_func_bind(struct usb_configuration *c, struct usb_function *f) { + struct printer_dev *dev = container_of(f, struct printer_dev, function); + struct usb_composite_dev *cdev = c->cdev; + struct usb_ep *in_ep, *out_ep; + int id; + + id = usb_interface_id(c, f); + if (id < 0) + return id; + intf_desc.bInterfaceNumber = id; + + /* all we really need is bulk IN/OUT */ + in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); + if (!in_ep) { +autoconf_fail: + dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", + cdev->gadget->name); + return -ENODEV; + } + in_ep->driver_data = in_ep; /* claim */ + + out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); + if (!out_ep) + goto autoconf_fail; + out_ep->driver_data = out_ep; /* claim */ + + /* assumes that all endpoints are dual-speed */ + hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + + dev->in_ep = in_ep; + dev->out_ep = out_ep; return 0; } @@ -1035,7 +1027,8 @@ static int printer_func_set_alt(struct usb_function *f, int ret = -ENOTSUPP; if (!alt) - ret = set_interface(dev, PRINTER_INTERFACE); + ret = set_interface(dev, intf); + return ret; } @@ -1107,13 +1100,13 @@ static int __init printer_bind_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; struct printer_dev *dev; - struct usb_ep *in_ep, *out_ep; int status = -ENOMEM; - int gcnum; size_t len; u32 i; struct usb_request *req; + usb_ep_autoconfig_reset(gadget); + dev = &usb_printer_gadget; dev->function.name = shortname; @@ -1125,6 +1118,10 @@ static int __init printer_bind_config(struct usb_configuration *c) dev->function.set_alt = printer_func_set_alt; dev->function.disable = printer_func_disable; + status = usb_add_function(c, &dev->function); + if (status) + return status; + /* Setup the sysfs files for the printer gadget. */ dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, NULL, "g_printer"); @@ -1145,23 +1142,6 @@ static int __init printer_bind_config(struct usb_configuration *c) goto fail; } - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - } else { - dev_warn(&gadget->dev, "controller '%s' not recognized\n", - gadget->name); - /* unrecognized, but safe unless bulk is REALLY quirky */ - device_desc.bcdDevice = - cpu_to_le16(0xFFFF); - } - snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - - if (iSerialNum) - strlcpy(serial_num, iSerialNum, sizeof serial_num); - if (iPNPstring) strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2); @@ -1169,26 +1149,6 @@ static int __init printer_bind_config(struct usb_configuration *c) pnp_string[0] = (len >> 8) & 0xFF; pnp_string[1] = len & 0xFF; - /* all we really need is bulk IN/OUT */ - usb_ep_autoconfig_reset(gadget); - in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc); - if (!in_ep) { -autoconf_fail: - dev_err(&gadget->dev, "can't autoconfigure on %s\n", - gadget->name); - return -ENODEV; - } - in_ep->driver_data = in_ep; /* claim */ - - out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc); - if (!out_ep) - goto autoconf_fail; - out_ep->driver_data = out_ep; /* claim */ - - /* assumes that all endpoints are dual-speed */ - hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; - hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; - usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { @@ -1215,9 +1175,6 @@ autoconf_fail: dev->current_rx_bytes = 0; dev->current_rx_buf = NULL; - dev->in_ep = in_ep; - dev->out_ep = out_ep; - for (i = 0; i < QLEN; i++) { req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); if (!req) { @@ -1250,8 +1207,6 @@ autoconf_fail: dev->gadget = gadget; INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); - INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name, - in_ep->name); return 0; fail: @@ -1266,14 +1221,28 @@ static int printer_unbind(struct usb_composite_dev *cdev) static int __init printer_bind(struct usb_composite_dev *cdev) { - return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); + int ret; + + ret = usb_string_ids_tab(cdev, strings); + if (ret < 0) + return ret; + device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id; + device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id; + + ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); + if (ret) + return ret; + usb_composite_overwrite_options(cdev, &coverwrite); + return ret; } -static struct usb_composite_driver printer_driver = { +static __refdata struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, + .bind = printer_bind, .unbind = printer_unbind, }; @@ -1297,7 +1266,7 @@ init(void) return status; } - status = usb_composite_probe(&printer_driver, printer_bind); + status = usb_composite_probe(&printer_driver); if (status) { class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 1); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 907ad3ecb341..8efbf08c3561 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -33,7 +33,6 @@ #include <linux/dma-mapping.h> #include <linux/irq.h> #include <linux/clk.h> -#include <linux/err.h> #include <linux/seq_file.h> #include <linux/debugfs.h> #include <linux/io.h> @@ -1000,7 +999,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) } static int pxa25x_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int pxa25x_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops pxa25x_udc_ops = { @@ -1258,7 +1257,7 @@ static void udc_enable (struct pxa25x_udc *dev) * the driver might get unbound. */ static int pxa25x_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct pxa25x_udc *dev = the_controller; int retval; @@ -1286,7 +1285,7 @@ fail: dev->gadget.dev.driver = NULL; return retval; } - retval = bind(&dev->gadget); + retval = bind(&dev->gadget, driver); if (retval) { DMSG("bind to driver %s --> error %d\n", driver->driver.name, retval); diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index 861f4df6ea22..2eca1e71fecd 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -225,7 +225,7 @@ dump_state(struct pxa25x_udc *dev) dev->stats.read.bytes, dev->stats.read.ops); for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { - if (dev->ep [i].desc == NULL) + if (dev->ep[i].ep.desc == NULL) continue; DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); } diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 644b4305cb99..2b3b01d5f403 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1672,7 +1672,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) } static int pxa27x_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int pxa27x_udc_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops pxa_udc_ops = { @@ -1803,7 +1803,7 @@ static void udc_enable(struct pxa_udc *udc) * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise */ static int pxa27x_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct pxa_udc *udc = the_controller; int retval; @@ -1826,7 +1826,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver, dev_err(udc->dev, "device_add error %d\n", retval); goto add_fail; } - retval = bind(&udc->gadget); + retval = bind(&udc->gadget, driver); if (retval) { dev_err(udc->dev, "bind to driver %s --> error %d\n", driver->driver.name, retval); @@ -2508,7 +2508,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) IRQF_SHARED, driver_name, udc); if (retval != 0) { dev_err(udc->dev, "%s: can't get irq %i, err %d\n", - driver_name, IRQ_USB, retval); + driver_name, udc->irq, retval); goto err_irq; } retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index b35babed6fcb..e4192b887de9 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -863,26 +863,8 @@ int rndis_msg_parser(u8 configNr, u8 *buf) */ pr_warning("%s: unknown RNDIS message 0x%08X len %d\n", __func__, MsgType, MsgLength); - { - unsigned i; - for (i = 0; i < MsgLength; i += 16) { - pr_debug("%03d: " - " %02x %02x %02x %02x" - " %02x %02x %02x %02x" - " %02x %02x %02x %02x" - " %02x %02x %02x %02x" - "\n", - i, - buf[i], buf [i+1], - buf[i+2], buf[i+3], - buf[i+4], buf [i+5], - buf[i+6], buf[i+7], - buf[i+8], buf [i+9], - buf[i+10], buf[i+11], - buf[i+12], buf [i+13], - buf[i+14], buf[i+15]); - } - } + print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET, + buf, MsgLength); break; } diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index b13e0bb5f5b8..6f696ee8b817 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2197,7 +2197,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) /* issue soft reset */ writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); - timeout = 1000; + timeout = 10000; do { grstctl = readl(hsotg->regs + GRSTCTL); } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); @@ -2207,7 +2207,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) return -EINVAL; } - timeout = 1000; + timeout = 10000; while (1) { u32 grstctl = readl(hsotg->regs + GRSTCTL); @@ -3516,7 +3516,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->dev = dev; hsotg->plat = plat; - hsotg->clk = clk_get(&pdev->dev, "otg"); + hsotg->clk = devm_clk_get(&pdev->dev, "otg"); if (IS_ERR(hsotg->clk)) { dev_err(dev, "cannot get otg clock\n"); return PTR_ERR(hsotg->clk); @@ -3599,6 +3599,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) if (hsotg->num_of_eps == 0) { dev_err(dev, "wrong number of EPs (zero)\n"); + ret = -EINVAL; goto err_supplies; } @@ -3606,6 +3607,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!eps) { dev_err(dev, "cannot get memory\n"); + ret = -ENOMEM; goto err_supplies; } @@ -3622,6 +3624,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!hsotg->ctrl_req) { dev_err(dev, "failed to allocate ctrl req\n"); + ret = -ENOMEM; goto err_ep_mem; } @@ -3664,7 +3667,6 @@ err_supplies: err_clk: clk_disable_unprepare(hsotg->clk); - clk_put(hsotg->clk); return ret; } @@ -3690,7 +3692,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); clk_disable_unprepare(hsotg->clk); - clk_put(hsotg->clk); device_unregister(&hsotg->gadget.dev); return 0; diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index e26a4e7ed2bf..d8e785d4ad59 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -135,7 +135,6 @@ struct s3c_hsudc_req { * @dev: The device reference used by probe function. * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed). * @regs: Remapped base address of controller's register space. - * @mem_rsrc: Device memory resource used for remapping device register space. * irq: IRQ number used by the controller. * uclk: Reference to the controller clock. * ep0state: Current state of EP0. @@ -150,7 +149,6 @@ struct s3c_hsudc { struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)]; spinlock_t lock; void __iomem *regs; - struct resource *mem_rsrc; int irq; struct clk *uclk; int ep0state; @@ -835,9 +833,9 @@ static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep, { struct s3c_hsudc_req *hsreq; - hsreq = kzalloc(sizeof *hsreq, gfp_flags); + hsreq = kzalloc(sizeof(*hsreq), gfp_flags); if (!hsreq) - return 0; + return NULL; INIT_LIST_HEAD(&hsreq->queue); return &hsreq->req; @@ -906,16 +904,16 @@ static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req, csr = readl((u32)hsudc->regs + offset); if (!(csr & S3C_ESR_TX_SUCCESS) && (s3c_hsudc_write_fifo(hsep, hsreq) == 1)) - hsreq = 0; + hsreq = NULL; } else { csr = readl((u32)hsudc->regs + offset); if ((csr & S3C_ESR_RX_SUCCESS) && (s3c_hsudc_read_fifo(hsep, hsreq) == 1)) - hsreq = 0; + hsreq = NULL; } } - if (hsreq != 0) + if (hsreq) list_add_tail(&hsreq->queue, &hsep->queue); spin_unlock_irqrestore(&hsudc->lock, flags); @@ -1271,7 +1269,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data; int ret, i; - hsudc = kzalloc(sizeof(struct s3c_hsudc) + + hsudc = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsudc) + sizeof(struct s3c_hsudc_ep) * pd->epnum, GFP_KERNEL); if (!hsudc) { @@ -1296,25 +1294,12 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "unable to obtain driver resource data\n"); - ret = -ENODEV; - goto err_res; - } - - hsudc->mem_rsrc = request_mem_region(res->start, resource_size(res), - dev_name(&pdev->dev)); - if (!hsudc->mem_rsrc) { - dev_err(dev, "failed to reserve register area\n"); - ret = -ENODEV; - goto err_res; - } - hsudc->regs = ioremap(res->start, resource_size(res)); + hsudc->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hsudc->regs) { dev_err(dev, "error mapping device register area\n"); ret = -EBUSY; - goto err_remap; + goto err_res; } spin_lock_init(&hsudc->lock); @@ -1337,21 +1322,22 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) ret = platform_get_irq(pdev, 0); if (ret < 0) { dev_err(dev, "unable to obtain IRQ number\n"); - goto err_irq; + goto err_res; } hsudc->irq = ret; - ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); + ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0, + driver_name, hsudc); if (ret < 0) { dev_err(dev, "irq request failed\n"); - goto err_irq; + goto err_res; } - hsudc->uclk = clk_get(&pdev->dev, "usb-device"); + hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); ret = PTR_ERR(hsudc->uclk); - goto err_clk; + goto err_res; } clk_enable(hsudc->uclk); @@ -1377,21 +1363,12 @@ err_add_udc: device_unregister(&hsudc->gadget.dev); err_add_device: clk_disable(hsudc->uclk); - clk_put(hsudc->uclk); -err_clk: - free_irq(hsudc->irq, hsudc); -err_irq: - iounmap(hsudc->regs); - -err_remap: - release_mem_region(res->start, resource_size(res)); err_res: if (!IS_ERR_OR_NULL(hsudc->transceiver)) usb_put_phy(hsudc->transceiver); regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); err_supplies: - kfree(hsudc); return ret; } diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index f2e51f50e528..a2fa6e16d019 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -12,6 +12,8 @@ * (at your option) any later version. */ +#define pr_fmt(fmt) "s3c2410_udc: " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> @@ -27,6 +29,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/prefetch.h> +#include <linux/io.h> #include <linux/debugfs.h> #include <linux/seq_file.h> @@ -35,7 +38,6 @@ #include <linux/usb/gadget.h> #include <asm/byteorder.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/unaligned.h> #include <mach/irqs.h> @@ -43,7 +45,7 @@ #include <mach/hardware.h> #include <plat/regs-udc.h> -#include <plat/udc.h> +#include <linux/platform_data/usb-s3c2410_udc.h> #include "s3c2410_udc.h" @@ -115,7 +117,7 @@ static int dprintk(int level, const char *fmt, ...) sizeof(printk_buf)-len, fmt, args); va_end(args); - return printk(KERN_DEBUG "%s", printk_buf); + return pr_debug("%s", printk_buf); } #else static int dprintk(int level, const char *fmt, ...) @@ -125,10 +127,10 @@ static int dprintk(int level, const char *fmt, ...) #endif static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) { - u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; + u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; - u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2; - u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2; + u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2; + u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2; addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); pwr_reg = udc_read(S3C2410_UDC_PWR_REG); @@ -164,10 +166,10 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) "EP2_I_CSR2 : 0x%04X\n" "EP2_O_CSR1 : 0x%04X\n" "EP2_O_CSR2 : 0x%04X\n", - addr_reg,pwr_reg,ep_int_reg,usb_int_reg, + addr_reg, pwr_reg, ep_int_reg, usb_int_reg, ep_int_en_reg, usb_int_en_reg, ep0_csr, - ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2, - ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2 + ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2, + ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2 ); return 0; @@ -230,7 +232,7 @@ static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) { udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY + udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY | S3C2410_UDC_EP0_CSR_DE), S3C2410_UDC_EP0_CSR_REG); } @@ -263,7 +265,7 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep, list_del_init(&req->queue); - if (likely (req->req.status == -EINPROGRESS)) + if (likely(req->req.status == -EINPROGRESS)) req->req.status = status; else status = req->req.status; @@ -280,9 +282,9 @@ static void s3c2410_udc_nuke(struct s3c2410_udc *udc, if (&ep->queue == NULL) return; - while (!list_empty (&ep->queue)) { + while (!list_empty(&ep->queue)) { struct s3c2410_request *req; - req = list_entry (ep->queue.next, struct s3c2410_request, + req = list_entry(ep->queue.next, struct s3c2410_request, queue); s3c2410_udc_done(ep, req, status); } @@ -389,10 +391,10 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, if (idx == 0) { /* Reset signal => no need to say 'data sent' */ - if (! (udc_read(S3C2410_UDC_USB_INT_REG) + if (!(udc_read(S3C2410_UDC_USB_INT_REG) & S3C2410_UDC_USBINT_RESET)) s3c2410_udc_set_ep0_de_in(base_addr); - ep->dev->ep0state=EP0_IDLE; + ep->dev->ep0state = EP0_IDLE; } else { udc_write(idx, S3C2410_UDC_INDEX_REG); ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); @@ -406,7 +408,7 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, } else { if (idx == 0) { /* Reset signal => no need to say 'data sent' */ - if (! (udc_read(S3C2410_UDC_USB_INT_REG) + if (!(udc_read(S3C2410_UDC_USB_INT_REG) & S3C2410_UDC_USBINT_RESET)) s3c2410_udc_set_ep0_ipr(base_addr); } else { @@ -442,7 +444,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, u8 *buf; u32 ep_csr; unsigned bufferspace; - int is_last=1; + int is_last = 1; unsigned avail; int fifo_count = 0; u32 idx; @@ -510,7 +512,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, /* Only ep0 debug messages are interesting */ if (idx == 0) dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", - __func__, fifo_count,is_last); + __func__, fifo_count, is_last); if (is_last) { if (idx == 0) { @@ -542,7 +544,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) { - unsigned char *outbuf = (unsigned char*)crq; + unsigned char *outbuf = (unsigned char *)crq; int bytes_read = 0; udc_write(0, S3C2410_UDC_INDEX_REG); @@ -648,7 +650,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, switch (crq->bRequest) { case USB_REQ_SET_CONFIGURATION: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n"); if (crq->bRequestType == USB_RECIP_DEVICE) { dev->req_config = 1; @@ -657,7 +659,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, break; case USB_REQ_SET_INTERFACE: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n"); if (crq->bRequestType == USB_RECIP_INTERFACE) { dev->req_config = 1; @@ -666,7 +668,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, break; case USB_REQ_SET_ADDRESS: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n"); if (crq->bRequestType == USB_RECIP_DEVICE) { tmp = crq->wValue & 0x7F; @@ -679,13 +681,12 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, break; case USB_REQ_GET_STATUS: - dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n"); + dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n"); s3c2410_udc_clear_ep0_opr(base_addr); if (dev->req_std) { - if (!s3c2410_udc_get_status(dev, crq)) { + if (!s3c2410_udc_get_status(dev, crq)) return; - } } break; @@ -750,7 +751,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, /* deferred i/o == no response yet */ } else if (dev->req_pending) { dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); - dev->req_pending=0; + dev->req_pending = 0; } dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); @@ -801,16 +802,14 @@ static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); - if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) { + if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) s3c2410_udc_write_fifo(ep, req); - } break; case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); - if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) { - s3c2410_udc_read_fifo(ep,req); - } + if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req) + s3c2410_udc_read_fifo(ep, req); break; case EP0_END_XFER: @@ -836,7 +835,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) u32 ep_csr1; u32 idx; - if (likely (!list_empty(&ep->queue))) + if (likely(!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct s3c2410_request, queue); else @@ -858,9 +857,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) return; } - if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) { - s3c2410_udc_write_fifo(ep,req); - } + if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) + s3c2410_udc_write_fifo(ep, req); } else { udc_write(idx, S3C2410_UDC_INDEX_REG); ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); @@ -873,9 +871,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) return; } - if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { - s3c2410_udc_read_fifo(ep,req); - } + if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) + s3c2410_udc_read_fifo(ep, req); } } @@ -1057,7 +1054,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, struct s3c2410_ep *ep; u32 max, tmp; unsigned long flags; - u32 csr1,csr2; + u32 csr1, csr2; u32 int_en_reg; ep = to_s3c2410_ep(_ep); @@ -1073,7 +1070,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, max = usb_endpoint_maxp(desc) & 0x1fff; - local_irq_save (flags); + local_irq_save(flags); _ep->maxpacket = max & 0x7ff; ep->ep.desc = desc; ep->halted = 0; @@ -1117,11 +1114,11 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, /* print some debug message */ tmp = desc->bEndpointAddress; - dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", - _ep->name,ep->num, tmp, + dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", + _ep->name, ep->num, tmp, desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); - local_irq_restore (flags); + local_irq_restore(flags); s3c2410_udc_set_halt(_ep, 0); return 0; @@ -1149,7 +1146,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep) ep->ep.desc = NULL; ep->halted = 1; - s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN); + s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN); /* disable irqs */ int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); @@ -1170,16 +1167,16 @@ s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) { struct s3c2410_request *req; - dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags); + dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags); if (!_ep) return NULL; - req = kzalloc (sizeof(struct s3c2410_request), mem_flags); + req = kzalloc(sizeof(struct s3c2410_request), mem_flags); if (!req) return NULL; - INIT_LIST_HEAD (&req->queue); + INIT_LIST_HEAD(&req->queue); return &req->req; } @@ -1197,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) return; - WARN_ON (!list_empty (&req->queue)); + WARN_ON(!list_empty(&req->queue)); kfree(req); } @@ -1220,12 +1217,12 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, } dev = ep->dev; - if (unlikely (!dev->driver + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { return -ESHUTDOWN; } - local_irq_save (flags); + local_irq_save(flags); if (unlikely(!_req || !_req->complete || !_req->buf || !list_empty(&req->queue))) { @@ -1233,7 +1230,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); else { dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", - __func__, !_req->complete,!_req->buf, + __func__, !_req->complete, !_req->buf, !list_empty(&req->queue)); } @@ -1299,7 +1296,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, } /* pio or dma irq handler advances the queue. */ - if (likely (req != 0)) + if (likely(req)) list_add_tail(&req->queue, &ep->queue); local_irq_restore(flags); @@ -1329,11 +1326,11 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) udc = to_s3c2410_udc(ep->gadget); - local_irq_save (flags); + local_irq_save(flags); - list_for_each_entry (req, &ep->queue, queue) { + list_for_each_entry(req, &ep->queue, queue) { if (&req->req == _req) { - list_del_init (&req->queue); + list_del_init(&req->queue); _req->status = -ECONNRESET; retval = 0; break; @@ -1348,7 +1345,7 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) s3c2410_udc_done(ep, req, -ECONNRESET); } - local_irq_restore (flags); + local_irq_restore(flags); return retval; } @@ -1367,7 +1364,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) return -EINVAL; } - local_irq_save (flags); + local_irq_save(flags); idx = ep->bEndpointAddress & 0x7F; @@ -1376,7 +1373,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) s3c2410_udc_set_ep0_de_out(base_addr); } else { udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN) + ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) ? S3C2410_UDC_IN_CSR1_REG : S3C2410_UDC_OUT_CSR1_REG); @@ -1404,7 +1401,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) } ep->halted = value ? 1 : 0; - local_irq_restore (flags); + local_irq_restore(flags); return 0; } @@ -1484,9 +1481,9 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) } s3c2410_udc_disable(udc); } - } - else + } else { return -EOPNOTSUPP; + } return 0; } @@ -1542,7 +1539,7 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) } static int s3c2410_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); static int s3c2410_udc_stop(struct usb_gadget_driver *driver); static const struct usb_gadget_ops s3c2410_ops = { @@ -1617,20 +1614,20 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) u32 i; /* device/ep0 records init */ - INIT_LIST_HEAD (&dev->gadget.ep_list); - INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); dev->ep0state = EP0_IDLE; for (i = 0; i < S3C2410_ENDPOINTS; i++) { struct s3c2410_ep *ep = &dev->ep[i]; if (i != 0) - list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); ep->dev = dev; ep->ep.desc = NULL; ep->halted = 0; - INIT_LIST_HEAD (&ep->queue); + INIT_LIST_HEAD(&ep->queue); } } @@ -1668,7 +1665,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) } static int s3c2410_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { struct s3c2410_udc *udc = the_controller; int retval; @@ -1683,13 +1680,13 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver, return -EBUSY; if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) { - printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n", + dev_err(&udc->gadget.dev, "Invalid driver: bind %p setup %p speed %d\n", bind, driver->setup, driver->max_speed); return -EINVAL; } #if defined(MODULE) if (!driver->unbind) { - printk(KERN_ERR "Invalid driver: no unbind method\n"); + dev_err(&udc->gadget.dev, "Invalid driver: no unbind method\n"); return -EINVAL; } #endif @@ -1699,15 +1696,17 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver, udc->gadget.dev.driver = &driver->driver; /* Bind the driver */ - if ((retval = device_add(&udc->gadget.dev)) != 0) { - printk(KERN_ERR "Error in device_add() : %d\n",retval); + retval = device_add(&udc->gadget.dev); + if (retval) { + dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval); goto register_error; } dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n", driver->driver.name); - if ((retval = bind(&udc->gadget)) != 0) { + retval = bind(&udc->gadget, driver); + if (retval) { device_del(&udc->gadget.dev); goto register_error; } @@ -1865,7 +1864,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; } - spin_lock_init (&udc->lock); + spin_lock_init(&udc->lock); udc_info = pdev->dev.platform_data; rsrc_start = S3C2410_PA_USBDEV; @@ -2028,7 +2027,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) +static int +s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) { s3c2410_udc_command(S3C2410_UDC_P_DISABLE); @@ -2073,7 +2073,7 @@ static int __init udc_init(void) s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); if (IS_ERR(s3c2410_udc_debugfs_root)) { - printk(KERN_ERR "%s: debugfs dir creation failed %ld\n", + pr_err("%s: debugfs dir creation failed %ld\n", gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); s3c2410_udc_debugfs_root = NULL; } diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 665c07422c26..44752f531e85 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -11,7 +11,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -37,17 +36,13 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_acm.c" #include "f_obex.c" #include "f_serial.c" #include "u_serial.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); /* Thanks to NetChip Technologies for donating this product ID. * @@ -61,15 +56,12 @@ /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 - -static char manufacturer[50]; +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = GS_VERSION_NAME, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME, + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */, { } /* end of list */ }; @@ -94,7 +86,7 @@ static struct usb_device_descriptor device_desc = { /* .bMaxPacketSize0 = f(hardware) */ .idVendor = cpu_to_le16(GS_VENDOR_ID), /* .idProduct = f(use_acm) */ - /* .bcdDevice = f(hardware) */ + .bcdDevice = cpu_to_le16(GS_VERSION_NUM), /* .iManufacturer = DYNAMIC */ /* .iProduct = DYNAMIC */ .bNumConfigurations = 1, @@ -162,8 +154,6 @@ static struct usb_configuration serial_config_driver = { static int __init gs_bind(struct usb_composite_dev *cdev) { - int gcnum; - struct usb_gadget *gadget = cdev->gadget; int status; status = gserial_setup(cdev->gadget, n_ports); @@ -174,50 +164,14 @@ static int __init gs_bind(struct usb_composite_dev *cdev) * contents can be overridden by the composite_dev glue. */ - /* device description: manufacturer, product */ - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - status = usb_string_id(cdev); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) goto fail; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - - device_desc.iManufacturer = status; - - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_PRODUCT_IDX].id = status; - - device_desc.iProduct = status; - - /* config description */ - status = usb_string_id(cdev); - if (status < 0) - goto fail; - strings_dev[STRING_DESCRIPTION_IDX].id = status; - + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + status = strings_dev[STRING_DESCRIPTION_IDX].id; serial_config_driver.iConfiguration = status; - /* set up other descriptors */ - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum); - else { - /* this is so simple (for now, no altsettings) that it - * SHOULD NOT have problems with bulk-capable hardware. - * so warn about unrcognized controllers -- don't panic. - * - * things like configuration and altsetting numbering - * can need hardware-specific attention though. - */ - pr_warning("gs_bind: controller '%s' not recognized\n", - gadget->name); - device_desc.bcdDevice = - cpu_to_le16(GS_VERSION_NUM | 0x0099); - } - if (gadget_is_otg(cdev->gadget)) { serial_config_driver.descriptors = otg_desc; serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; @@ -229,6 +183,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev) if (status < 0) goto fail; + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s\n", GS_VERSION_NAME); return 0; @@ -238,11 +193,12 @@ fail: return status; } -static struct usb_composite_driver gserial_driver = { +static __refdata struct usb_composite_driver gserial_driver = { .name = "g_serial", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, + .bind = gs_bind, }; static int __init init(void) @@ -271,7 +227,7 @@ static int __init init(void) } strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label; - return usb_composite_probe(&gserial_driver, gs_bind); + return usb_composite_probe(&gserial_driver); } module_init(init); diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 5444866e13ef..eaa1005377fc 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -25,13 +25,10 @@ #include <target/configfs_macros.h> #include <asm/unaligned.h> -#include "usbstring.c" -#include "epautoconf.c" -#include "config.c" -#include "composite.c" - #include "tcm_usb_gadget.h" +USB_GADGET_COMPOSITE_OPTIONS(); + static struct target_fabric_configfs *usbg_fabric_configfs; static inline struct f_uas *to_f_uas(struct usb_function *f) @@ -1977,7 +1974,6 @@ static struct usb_interface_descriptor bot_intf_desc = { .bInterfaceClass = USB_CLASS_MASS_STORAGE, .bInterfaceSubClass = USB_SC_SCSI, .bInterfaceProtocol = USB_PR_BULK, - .iInterface = USB_G_STR_INT_UAS, }; static struct usb_interface_descriptor uasp_intf_desc = { @@ -1988,7 +1984,6 @@ static struct usb_interface_descriptor uasp_intf_desc = { .bInterfaceClass = USB_CLASS_MASS_STORAGE, .bInterfaceSubClass = USB_SC_SCSI, .bInterfaceProtocol = USB_PR_UAS, - .iInterface = USB_G_STR_INT_BBB, }; static struct usb_endpoint_descriptor uasp_bi_desc = { @@ -2209,20 +2204,16 @@ static struct usb_device_descriptor usbg_device_desc = { .bDeviceClass = USB_CLASS_PER_INTERFACE, .idVendor = cpu_to_le16(UAS_VENDOR_ID), .idProduct = cpu_to_le16(UAS_PRODUCT_ID), - .iManufacturer = USB_G_STR_MANUFACTOR, - .iProduct = USB_G_STR_PRODUCT, - .iSerialNumber = USB_G_STR_SERIAL, - .bNumConfigurations = 1, }; static struct usb_string usbg_us_strings[] = { - { USB_G_STR_MANUFACTOR, "Target Manufactor"}, - { USB_G_STR_PRODUCT, "Target Product"}, - { USB_G_STR_SERIAL, "000000000001"}, - { USB_G_STR_CONFIG, "default config"}, - { USB_G_STR_INT_UAS, "USB Attached SCSI"}, - { USB_G_STR_INT_BBB, "Bulk Only Transport"}, + [USB_GADGET_MANUFACTURER_IDX].s = "Target Manufactor", + [USB_GADGET_PRODUCT_IDX].s = "Target Product", + [USB_GADGET_SERIAL_IDX].s = "000000000001", + [USB_G_STR_CONFIG].s = "default config", + [USB_G_STR_INT_UAS].s = "USB Attached SCSI", + [USB_G_STR_INT_BBB].s = "Bulk Only Transport", { }, }; @@ -2244,7 +2235,6 @@ static int guas_unbind(struct usb_composite_dev *cdev) static struct usb_configuration usbg_config_driver = { .label = "Linux Target", .bConfigurationValue = 1, - .iConfiguration = USB_G_STR_CONFIG, .bmAttributes = USB_CONFIG_ATT_SELFPOWER, }; @@ -2417,6 +2407,9 @@ static int usbg_cfg_bind(struct usb_configuration *c) fu->function.disable = usbg_disable; fu->tpg = the_only_tpg_I_currently_have; + bot_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_BBB].id; + uasp_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_UAS].id; + ret = usb_add_function(c, &fu->function); if (ret) goto err; @@ -2431,22 +2424,38 @@ static int usb_target_bind(struct usb_composite_dev *cdev) { int ret; + ret = usb_string_ids_tab(cdev, usbg_us_strings); + if (ret) + return ret; + + usbg_device_desc.iManufacturer = + usbg_us_strings[USB_GADGET_MANUFACTURER_IDX].id; + usbg_device_desc.iProduct = usbg_us_strings[USB_GADGET_PRODUCT_IDX].id; + usbg_device_desc.iSerialNumber = + usbg_us_strings[USB_GADGET_SERIAL_IDX].id; + usbg_config_driver.iConfiguration = + usbg_us_strings[USB_G_STR_CONFIG].id; + ret = usb_add_config(cdev, &usbg_config_driver, usbg_cfg_bind); + if (ret) + return ret; + usb_composite_overwrite_options(cdev, &coverwrite); return 0; } -static struct usb_composite_driver usbg_driver = { +static __refdata struct usb_composite_driver usbg_driver = { .name = "g_target", .dev = &usbg_device_desc, .strings = usbg_strings, .max_speed = USB_SPEED_SUPER, + .bind = usb_target_bind, .unbind = guas_unbind, }; static int usbg_attach(struct usbg_tpg *tpg) { - return usb_composite_probe(&usbg_driver, usb_target_bind); + return usb_composite_probe(&usbg_driver); } static void usbg_detach(struct usbg_tpg *tpg) diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h index bb18999a9a8d..8289219925b8 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.h +++ b/drivers/usb/gadget/tcm_usb_gadget.h @@ -16,12 +16,11 @@ #define UASP_SS_EP_COMP_LOG_STREAMS 4 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS) -#define USB_G_STR_MANUFACTOR 1 -#define USB_G_STR_PRODUCT 2 -#define USB_G_STR_SERIAL 3 -#define USB_G_STR_CONFIG 4 -#define USB_G_STR_INT_UAS 5 -#define USB_G_STR_INT_BBB 6 +enum { + USB_G_STR_CONFIG = USB_GADGET_FIRST_AVAIL_IDX, + USB_G_STR_INT_UAS, + USB_G_STR_INT_BBB, +}; #define USB_G_ALT_INT_BBB 0 #define USB_G_ALT_INT_UAS 1 diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index f1e5fbf5c2c7..6458764994ef 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -14,6 +14,7 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gfp.h> #include <linux/device.h> #include <linux/ctype.h> @@ -83,17 +84,10 @@ struct eth_dev { #define DEFAULT_QLEN 2 /* double buffering by default */ - -#ifdef CONFIG_USB_GADGET_DUALSPEED - static unsigned qmult = 5; module_param(qmult, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed"); -#else /* full speed (low speed doesn't do bulk) */ -#define qmult 1 -#endif - /* for dual-speed hardware, use deeper queues at high/super speed */ static inline int qlen(struct usb_gadget *gadget) { @@ -669,6 +663,8 @@ static int eth_stop(struct net_device *net) spin_lock_irqsave(&dev->lock, flags); if (dev->port_usb) { struct gether *link = dev->port_usb; + const struct usb_endpoint_descriptor *in; + const struct usb_endpoint_descriptor *out; if (link->close) link->close(link); @@ -682,10 +678,14 @@ static int eth_stop(struct net_device *net) * their own pace; the network stack can handle old packets. * For the moment we leave this here, since it works. */ + in = link->in_ep->desc; + out = link->out_ep->desc; usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { DBG(dev, "host still using in/out endpoints\n"); + link->in_ep->desc = in; + link->out_ep->desc = out; usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 5b3f5fffea92..f1739526820f 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -132,11 +132,15 @@ static unsigned n_ports; #ifdef VERBOSE_DEBUG +#ifndef pr_vdebug #define pr_vdebug(fmt, arg...) \ pr_debug(fmt, ##arg) +#endif /* pr_vdebug */ #else +#ifndef pr_vdebig #define pr_vdebug(fmt, arg...) \ ({ if (0) pr_debug(fmt, ##arg); }) +#endif /* pr_vdebug */ #endif /*-------------------------------------------------------------------------*/ @@ -1129,7 +1133,8 @@ int gserial_setup(struct usb_gadget *g, unsigned count) for (i = 0; i < count; i++) { struct device *tty_dev; - tty_dev = tty_register_device(gs_tty_driver, i, &g->dev); + tty_dev = tty_port_register_device(&ports[i].port->port, + gs_tty_driver, i, &g->dev); if (IS_ERR(tty_dev)) pr_warning("%s: no classdev for port %d, err %ld\n", __func__, i, PTR_ERR(tty_dev)); diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index e5e44f8cde9a..f3cd9690b101 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -118,7 +118,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); */ static inline int usb_gadget_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) + int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) { return gadget->ops->start(driver, bind); } @@ -262,8 +262,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); if (udc_is_newstyle(udc)) { - udc->driver->disconnect(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { @@ -311,13 +311,12 @@ EXPORT_SYMBOL_GPL(usb_del_gadget_udc); /* ------------------------------------------------------------------------- */ -int usb_gadget_probe_driver(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +int usb_gadget_probe_driver(struct usb_gadget_driver *driver) { struct usb_udc *udc = NULL; int ret; - if (!driver || !bind || !driver->setup) + if (!driver || !driver->bind || !driver->setup) return -EINVAL; mutex_lock(&udc_lock); @@ -339,7 +338,7 @@ found: udc->dev.driver = &driver->driver; if (udc_is_newstyle(udc)) { - ret = bind(udc->gadget); + ret = driver->bind(udc->gadget, driver); if (ret) goto err1; ret = usb_gadget_udc_start(udc->gadget, driver); @@ -350,7 +349,7 @@ found: usb_gadget_connect(udc->gadget); } else { - ret = usb_gadget_start(udc->gadget, driver, bind); + ret = usb_gadget_start(udc->gadget, driver, driver->bind); if (ret) goto err1; diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 4d25b9009edf..1f49fce0f0b7 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -9,6 +9,7 @@ #include <linux/errno.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/list.h> #include <linux/string.h> #include <linux/device.h> @@ -68,4 +69,4 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) buf [1] = USB_DT_STRING; return buf [0]; } - +EXPORT_SYMBOL_GPL(usb_gadget_get_string); diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 120e134e805e..69cf5c2cd335 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -23,16 +23,12 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "uvc_queue.c" #include "uvc_video.c" #include "uvc_v4l2.c" #include "f_uvc.c" +USB_GADGET_COMPOSITE_OPTIONS(); /* -------------------------------------------------------------------------- * Device descriptor */ @@ -47,13 +43,12 @@ static char webcam_config_label[] = "Video"; /* string IDs are assigned dynamically */ -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_DESCRIPTION_IDX 2 +#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX static struct usb_string webcam_strings[] = { - [STRING_MANUFACTURER_IDX].s = webcam_vendor_label, - [STRING_PRODUCT_IDX].s = webcam_product_label, + [USB_GADGET_MANUFACTURER_IDX].s = webcam_vendor_label, + [USB_GADGET_PRODUCT_IDX].s = webcam_product_label, + [USB_GADGET_SERIAL_IDX].s = "", [STRING_DESCRIPTION_IDX].s = webcam_config_label, { } }; @@ -358,26 +353,22 @@ webcam_bind(struct usb_composite_dev *cdev) /* Allocate string descriptor numbers ... note that string contents * can be overridden by the composite_dev glue. */ - if ((ret = usb_string_id(cdev)) < 0) - goto error; - webcam_strings[STRING_MANUFACTURER_IDX].id = ret; - webcam_device_descriptor.iManufacturer = ret; - - if ((ret = usb_string_id(cdev)) < 0) - goto error; - webcam_strings[STRING_PRODUCT_IDX].id = ret; - webcam_device_descriptor.iProduct = ret; - - if ((ret = usb_string_id(cdev)) < 0) + ret = usb_string_ids_tab(cdev, webcam_strings); + if (ret < 0) goto error; - webcam_strings[STRING_DESCRIPTION_IDX].id = ret; - webcam_config_driver.iConfiguration = ret; + webcam_device_descriptor.iManufacturer = + webcam_strings[USB_GADGET_MANUFACTURER_IDX].id; + webcam_device_descriptor.iProduct = + webcam_strings[USB_GADGET_PRODUCT_IDX].id; + webcam_config_driver.iConfiguration = + webcam_strings[STRING_DESCRIPTION_IDX].id; /* Register our configuration. */ if ((ret = usb_add_config(cdev, &webcam_config_driver, webcam_config_bind)) < 0) goto error; + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "Webcam Video Gadget\n"); return 0; @@ -390,18 +381,19 @@ error: * Driver */ -static struct usb_composite_driver webcam_driver = { +static __refdata struct usb_composite_driver webcam_driver = { .name = "g_webcam", .dev = &webcam_device_descriptor, .strings = webcam_device_strings, .max_speed = USB_SPEED_SUPER, + .bind = webcam_bind, .unbind = webcam_unbind, }; static int __init webcam_init(void) { - return usb_composite_probe(&webcam_driver, webcam_bind); + return usb_composite_probe(&webcam_driver); } static void __exit diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 12ad516ada77..6bf4c0611365 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -42,7 +42,6 @@ #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/utsname.h> #include <linux/device.h> #include "g_zero.h" @@ -58,15 +57,11 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "composite.c" -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" - #include "f_sourcesink.c" #include "f_loopback.c" /*-------------------------------------------------------------------------*/ +USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_VERSION "Cinco de Mayo 2008" @@ -141,20 +136,13 @@ const struct usb_descriptor_header *otg_desc[] = { #endif /* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 -#define STRING_SERIAL_IDX 2 - -static char manufacturer[50]; - /* default serial number takes at least two packets */ static char serial[] = "0123456789.0123456789.0123456789"; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = longname, - [STRING_SERIAL_IDX].s = serial, + [USB_GADGET_MANUFACTURER_IDX].s = "", + [USB_GADGET_PRODUCT_IDX].s = longname, + [USB_GADGET_SERIAL_IDX].s = serial, { } /* end of list */ }; @@ -265,30 +253,18 @@ static void zero_resume(struct usb_composite_dev *cdev) static int __init zero_bind(struct usb_composite_dev *cdev) { - int gcnum; - struct usb_gadget *gadget = cdev->gadget; - int id; + int status; /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_dev[STRING_MANUFACTURER_IDX].id = id; - device_desc.iManufacturer = id; - - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_dev[STRING_PRODUCT_IDX].id = id; - device_desc.iProduct = id; - - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_dev[STRING_SERIAL_IDX].id = id; - device_desc.iSerialNumber = id; + status = usb_string_ids_tab(cdev, strings_dev); + if (status < 0) + return status; + + device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; + device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; + device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id; setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev); @@ -303,28 +279,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev) loopback_add(cdev, autoresume != 0); } - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - else { - /* gadget zero is so simple (for now, no altsettings) that - * it SHOULD NOT have problems with bulk-capable hardware. - * so just warn about unrcognized controllers -- don't panic. - * - * things like configuration and altsetting numbering - * can need hardware-specific attention though. - */ - pr_warning("%s: controller '%s' not recognized\n", - longname, gadget->name); - device_desc.bcdDevice = cpu_to_le16(0x9999); - } + usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname); - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - return 0; } @@ -334,11 +292,12 @@ static int zero_unbind(struct usb_composite_dev *cdev) return 0; } -static struct usb_composite_driver zero_driver = { +static __refdata struct usb_composite_driver zero_driver = { .name = "zero", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, + .bind = zero_bind, .unbind = zero_unbind, .suspend = zero_suspend, .resume = zero_resume, @@ -349,7 +308,7 @@ MODULE_LICENSE("GPL"); static int __init init(void) { - return usb_composite_probe(&zero_driver, zero_bind); + return usb_composite_probe(&zero_driver); } module_init(init); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 075d2eca8108..3f1431d37e1c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -18,8 +18,8 @@ config USB_C67X00_HCD module will be called c67x00. config USB_XHCI_HCD - tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)" - depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL + tristate "xHCI HCD (USB 3.0) support" + depends on USB && USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -262,7 +262,7 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -292,7 +292,7 @@ config USB_OHCI_HCD depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP - select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008 + depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -376,7 +376,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" - depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL + depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM default n @@ -414,21 +414,21 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM bool "Generic OHCI driver for a platform device" - depends on USB_OHCI_HCD && EXPERIMENTAL + depends on USB_OHCI_HCD default n ---help--- Adds an OHCI host driver for a generic platform device, which - provieds a memory space and an irq. + provides a memory space and an irq. If unsure, say N. config USB_EHCI_HCD_PLATFORM bool "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD && EXPERIMENTAL + depends on USB_EHCI_HCD default n ---help--- Adds an EHCI host driver for a generic platform device, which - provieds a memory space and an irq. + provides a memory space and an irq. If unsure, say N. @@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON) + depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -468,7 +468,15 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool depends on USB_UHCI_HCD - default y if SPARC_LEON + default y if (SPARC_LEON || ARCH_VT8500) + +config USB_UHCI_PLATFORM + bool "Generic UHCI Platform Driver support" + depends on USB_UHCI_SUPPORT_NON_PCI_HC + default y if ARCH_VT8500 + ---help--- + Enable support for generic UHCI platform devices that require no + additional configuration. config USB_UHCI_BIG_ENDIAN_MMIO bool @@ -583,8 +591,7 @@ config USB_RENESAS_USBHS_HCD module will be called renesas-usbhs. config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Wireless USB Host Controller Interface (WHCI) driver" depends on PCI && USB && UWB select USB_WUSB select UWB_WHCI @@ -596,8 +603,7 @@ config USB_WHCI_HCD will be called "whci-hcd". config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Host Wire Adapter (HWA) driver" depends on USB && UWB select USB_WUSB select UWB_HWA @@ -648,7 +654,7 @@ config USB_OCTEON2_COMMON config USB_HCD_BCMA tristate "BCMA usb host driver" - depends on BCMA && EXPERIMENTAL + depends on BCMA select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help @@ -660,7 +666,7 @@ config USB_HCD_BCMA config USB_HCD_SSB tristate "SSB usb host driver" - depends on SSB && EXPERIMENTAL + depends on SSB select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a47e2cffaaf8..411bb74152eb 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -150,31 +150,24 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - retval = -EBUSY; - goto fail_request_resource; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); retval = -EFAULT; - goto fail_ioremap; + goto fail_request_resource; } - iclk = clk_get(&pdev->dev, "ehci_clk"); + iclk = devm_clk_get(&pdev->dev, "ehci_clk"); if (IS_ERR(iclk)) { dev_err(&pdev->dev, "Error getting interface clock\n"); retval = -ENOENT; - goto fail_get_iclk; + goto fail_request_resource; } - fclk = clk_get(&pdev->dev, "uhpck"); + fclk = devm_clk_get(&pdev->dev, "uhpck"); if (IS_ERR(fclk)) { dev_err(&pdev->dev, "Error getting function clock\n"); retval = -ENOENT; - goto fail_get_fclk; + goto fail_request_resource; } atmel_start_ehci(pdev); @@ -187,13 +180,6 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) fail_add_hcd: atmel_stop_ehci(pdev); - clk_put(fclk); -fail_get_fclk: - clk_put(iclk); -fail_get_iclk: - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); fail_request_resource: usb_put_hcd(hcd); fail_create_hcd: @@ -209,13 +195,9 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) ehci_shutdown(hcd); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); atmel_stop_ehci(pdev); - clk_put(fclk); - clk_put(iclk); fclk = iclk = NULL; return 0; diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index cba10d625a5d..65c945eb4144 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -98,23 +98,17 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { - pr_debug("ioremap failed"); + pr_debug("devm_request_and_ioremap failed"); ret = -ENOMEM; - goto err2; + goto err1; } if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) { printk(KERN_INFO "%s: controller init failed!\n", pdev->name); ret = -ENODEV; - goto err3; + goto err1; } ret = usb_add_hcd(hcd, pdev->resource[1].start, @@ -125,10 +119,6 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) } alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); -err3: - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return ret; @@ -140,8 +130,6 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) usb_remove_hcd(hcd); alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c index caaa3e5be334..d91708d2e729 100644 --- a/drivers/usb/host/ehci-cns3xxx.c +++ b/drivers/usb/host/ehci-cns3xxx.c @@ -105,27 +105,17 @@ static int cns3xxx_ehci_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(dev, "controller already in use\n"); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(dev, "error mapping memory\n"); retval = -EFAULT; - goto err2; + goto err1; } retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval == 0) return retval; - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); @@ -137,8 +127,6 @@ static int cns3xxx_ehci_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); /* * EHCI and OHCI share the same clock and power, diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index f0c00de035ef..1599806e3d47 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -653,10 +653,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) seen [seen_count++].qh = p.qh; } else temp = 0; - if (p.qh) { - tag = Q_NEXT_TYPE(ehci, hw->hw_next); - p = p.qh->qh_next; - } + tag = Q_NEXT_TYPE(ehci, hw->hw_next); + p = p.qh->qh_next; break; case Q_TYPE_FSTN: temp = scnprintf (next, size, diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b7451b29c5ac..9bfde82078ec 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -210,11 +210,11 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct usb_hcd *hcd, +static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc, temp; + u32 portsc; struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; struct device *dev = hcd->self.controller; @@ -232,9 +232,15 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->controller_ver) { /* controller version 1.6 or above */ - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | - USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + setbits32(non_ehci + FSL_SOC_USB_CTRL, + ULPI_PHY_CLK_SEL); + /* + * Due to controller issue of PHY_CLK_VALID in ULPI + * mode, we set USB_CTRL_USB_EN before checking + * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. + */ + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + UTMI_PHY_EN, USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; @@ -247,9 +253,7 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_UTMI: if (pdata->controller_ver) { /* controller version 1.6 or above */ - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | - UTMI_PHY_EN | USB_CTRL_USB_EN); + setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to become stable - 10ms*/ } @@ -262,23 +266,33 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_NONE: break; } + + if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { + /* check PHY_CLK_VALID to get phy clk valid */ + if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & + PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { + printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); + return -EINVAL; + } + } + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); + + if (phy_mode != FSL_USB2_PHY_ULPI) + setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); + + return 0; } -static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; void __iomem *non_ehci = hcd->regs; - u32 temp; pdata = hcd->self.controller->platform_data; - /* Enable PHY interface in the control reg. */ if (pdata->have_sysif_regs) { - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004); - /* * Turn on cache snooping hardware, since some PowerPC platforms * wholly rely on hardware to deal with cache coherent @@ -293,7 +307,8 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -307,9 +322,12 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) + return -EINVAL; } if (pdata->have_sysif_regs) { @@ -322,12 +340,15 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } + + return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - ehci_fsl_usb_setup(ehci); + if (ehci_fsl_usb_setup(ehci)) + return -EINVAL; ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 88403684d10b..dbd292e9f0a7 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -61,4 +61,5 @@ #define PLL_RESET (1<<8) #define UTMI_PHY_EN (1<<9) #define ULPI_PHY_CLK_SEL (1<<10) +#define PHY_CLK_VALID (1<<17) #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 22ca45c079a4..3180cb3624d9 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -127,12 +127,6 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); - rv = -EBUSY; - goto err_rmr; - } - irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); @@ -140,9 +134,9 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) goto err_irq; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&op->dev, &res); if (!hcd->regs) { - printk(KERN_ERR "%s: ioremap failed\n", __FILE__); + pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -161,17 +155,13 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) rv = usb_add_hcd(hcd, irq, 0); if (rv) - goto err_ehci; + goto err_ioremap; return 0; -err_ehci: - iounmap(hcd->regs); err_ioremap: irq_dispose_mapping(irq); err_irq: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_rmr: usb_put_hcd(hcd); return rv; @@ -188,9 +178,7 @@ static int ehci_hcd_grlib_remove(struct platform_device *op) usb_remove_hcd(hcd); - iounmap(hcd->regs); irq_dispose_mapping(hcd->irq); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b05c6865b610..6bf6c42481e8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -228,7 +228,7 @@ static int ehci_reset (struct ehci_hcd *ehci) /* If the EHCI debug controller is active, special care must be * taken before and after a host controller reset */ - if (ehci->debug && !dbgp_reset_prep()) + if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci))) ehci->debug = NULL; command |= CMD_RESET; @@ -251,7 +251,7 @@ static int ehci_reset (struct ehci_hcd *ehci) tdi_reset (ehci); if (ehci->debug) - dbgp_external_startup(); + dbgp_external_startup(ehci_to_hcd(ehci)); ehci->port_c_suspend = ehci->suspended_ports = ehci->resuming_ports = 0; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c7880223738a..914ce9370e70 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -353,10 +353,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd) goto shutdown; if (unlikely(ehci->debug)) { - if (!dbgp_reset_prep()) + if (!dbgp_reset_prep(hcd)) ehci->debug = NULL; else - dbgp_external_startup(); + dbgp_external_startup(hcd); } /* Ideally and we've got a real resume here, and no port's power diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index 488d401942e9..f224c0a48bed 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -98,30 +98,19 @@ static int ixp4xx_ehci_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - retval = -EBUSY; - goto fail_request_resource; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); retval = -EFAULT; - goto fail_ioremap; + goto fail_request_resource; } retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) - goto fail_add_hcd; + goto fail_request_resource; return retval; -fail_add_hcd: - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); fail_request_resource: usb_put_hcd(hcd); fail_create_hcd: @@ -134,8 +123,6 @@ static int ixp4xx_ehci_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c index a283e59709d6..ca759652626b 100644 --- a/drivers/usb/host/ehci-ls1x.c +++ b/drivers/usb/host/ehci-ls1x.c @@ -106,29 +106,19 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -EFAULT; - goto err_release_region; + goto err_put_hcd; } - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) - goto err_iounmap; + goto err_put_hcd; return ret; -err_iounmap: - iounmap(hcd->regs); -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); return ret; @@ -139,8 +129,6 @@ static int ehci_hcd_ls1x_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 17dd9e94001e..4af4dc5b618c 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -133,7 +133,7 @@ static int ehci_msm_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; @@ -145,17 +145,17 @@ static int ehci_msm_probe(struct platform_device *pdev) * powering up VBUS, mapping of registers address space and power * management. */ - phy = usb_get_phy(USB_PHY_TYPE_USB2); + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; - goto unmap; + goto put_hcd; } ret = otg_set_host(phy->otg, &hcd->self); if (ret < 0) { dev_err(&pdev->dev, "unable to register with transceiver\n"); - goto put_transceiver; + goto put_hcd; } device_init_wakeup(&pdev->dev, 1); @@ -168,10 +168,6 @@ static int ehci_msm_probe(struct platform_device *pdev) return 0; -put_transceiver: - usb_put_phy(phy); -unmap: - iounmap(hcd->regs); put_hcd: usb_put_hcd(hcd); @@ -187,7 +183,6 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); otg_set_host(phy->otg, NULL); - usb_put_phy(phy); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index f6df1ccc9617..f7bfc0b898b9 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -161,7 +161,7 @@ static int mv_ehci_probe(struct platform_device *pdev) return -ENOMEM; size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum; - ehci_mv = kzalloc(size, GFP_KERNEL); + ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (ehci_mv == NULL) { dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n"); retval = -ENOMEM; @@ -175,12 +175,12 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->clknum = pdata->clknum; for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) { ehci_mv->clk[clk_i] = - clk_get(&pdev->dev, pdata->clkname[clk_i]); + devm_clk_get(&pdev->dev, pdata->clkname[clk_i]); if (IS_ERR(ehci_mv->clk[clk_i])) { dev_err(&pdev->dev, "error get clck \"%s\"\n", pdata->clkname[clk_i]); retval = PTR_ERR(ehci_mv->clk[clk_i]); - goto err_put_clk; + goto err_clear_drvdata; } } @@ -188,34 +188,36 @@ static int mv_ehci_probe(struct platform_device *pdev) if (r == NULL) { dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); retval = -ENODEV; - goto err_put_clk; + goto err_clear_drvdata; } - ehci_mv->phy_regs = ioremap(r->start, resource_size(r)); + ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start, + resource_size(r)); if (ehci_mv->phy_regs == 0) { dev_err(&pdev->dev, "failed to map phy I/O memory\n"); retval = -EFAULT; - goto err_put_clk; + goto err_clear_drvdata; } r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs"); if (!r) { dev_err(&pdev->dev, "no I/O memory resource defined\n"); retval = -ENODEV; - goto err_iounmap_phyreg; + goto err_clear_drvdata; } - ehci_mv->cap_regs = ioremap(r->start, resource_size(r)); + ehci_mv->cap_regs = devm_ioremap(&pdev->dev, r->start, + resource_size(r)); if (ehci_mv->cap_regs == NULL) { dev_err(&pdev->dev, "failed to map I/O memory\n"); retval = -EFAULT; - goto err_iounmap_phyreg; + goto err_clear_drvdata; } retval = mv_ehci_enable(ehci_mv); if (retval) { dev_err(&pdev->dev, "init phy error %d\n", retval); - goto err_iounmap_capreg; + goto err_clear_drvdata; } offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK; @@ -239,7 +241,7 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { #ifdef CONFIG_USB_OTG_UTILS - ehci_mv->otg = usb_get_phy(USB_PHY_TYPE_USB2); + ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(ehci_mv->otg)) { dev_err(&pdev->dev, "unable to find transceiver\n"); @@ -252,7 +254,7 @@ static int mv_ehci_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to register with transceiver\n"); retval = -ENODEV; - goto err_put_transceiver; + goto err_disable_clk; } /* otg will enable clock before use as host */ mv_ehci_disable(ehci_mv); @@ -286,22 +288,10 @@ static int mv_ehci_probe(struct platform_device *pdev) err_set_vbus: if (pdata->set_vbus) pdata->set_vbus(0); -#ifdef CONFIG_USB_OTG_UTILS -err_put_transceiver: - if (!IS_ERR_OR_NULL(ehci_mv->otg)) - usb_put_phy(ehci_mv->otg); -#endif err_disable_clk: mv_ehci_disable(ehci_mv); -err_iounmap_capreg: - iounmap(ehci_mv->cap_regs); -err_iounmap_phyreg: - iounmap(ehci_mv->phy_regs); -err_put_clk: - for (clk_i--; clk_i >= 0; clk_i--) - clk_put(ehci_mv->clk[clk_i]); +err_clear_drvdata: platform_set_drvdata(pdev, NULL); - kfree(ehci_mv); err_put_hcd: usb_put_hcd(hcd); @@ -317,10 +307,8 @@ static int mv_ehci_remove(struct platform_device *pdev) if (hcd->rh_registered) usb_remove_hcd(hcd); - if (!IS_ERR_OR_NULL(ehci_mv->otg)) { + if (!IS_ERR_OR_NULL(ehci_mv->otg)) otg_set_host(ehci_mv->otg->otg, NULL); - usb_put_phy(ehci_mv->otg); - } if (ehci_mv->mode == MV_USB_MODE_HOST) { if (ehci_mv->pdata->set_vbus) @@ -329,15 +317,8 @@ static int mv_ehci_remove(struct platform_device *pdev) mv_ehci_disable(ehci_mv); } - iounmap(ehci_mv->cap_regs); - iounmap(ehci_mv->phy_regs); - - for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) - clk_put(ehci_mv->clk[clk_i]); - platform_set_drvdata(pdev, NULL); - kfree(ehci_mv); usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 34201372c85f..4a08fc0b27c9 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -25,7 +25,7 @@ #include <linux/slab.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> +#include <linux/platform_data/usb-ehci-mxc.h> #include <asm/mach-types.h> @@ -121,7 +121,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - priv = kzalloc(sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; goto err_alloc; @@ -131,34 +131,28 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!res) { dev_err(dev, "Found HC with no register addr. Check setup!\n"); ret = -ENODEV; - goto err_get_resource; + goto err_alloc; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(dev, "controller already in use\n"); - ret = -EBUSY; - goto err_request_mem; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { dev_err(dev, "error mapping memory\n"); ret = -EFAULT; - goto err_ioremap; + goto err_alloc; } /* enable clocks */ - priv->usbclk = clk_get(dev, "ipg"); + priv->usbclk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(priv->usbclk)) { ret = PTR_ERR(priv->usbclk); - goto err_clk; + goto err_alloc; } clk_prepare_enable(priv->usbclk); - priv->ahbclk = clk_get(dev, "ahb"); + priv->ahbclk = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(priv->ahbclk)) { ret = PTR_ERR(priv->ahbclk); goto err_clk_ahb; @@ -166,7 +160,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_prepare_enable(priv->ahbclk); /* "dr" device has its own clock on i.MX51 */ - priv->phyclk = clk_get(dev, "phy"); + priv->phyclk = devm_clk_get(&pdev->dev, "phy"); if (IS_ERR(priv->phyclk)) priv->phyclk = NULL; if (priv->phyclk) @@ -245,23 +239,12 @@ err_add: if (pdata && pdata->exit) pdata->exit(pdev); err_init: - if (priv->phyclk) { + if (priv->phyclk) clk_disable_unprepare(priv->phyclk); - clk_put(priv->phyclk); - } clk_disable_unprepare(priv->ahbclk); - clk_put(priv->ahbclk); err_clk_ahb: clk_disable_unprepare(priv->usbclk); - clk_put(priv->usbclk); -err_clk: - iounmap(hcd->regs); -err_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_request_mem: -err_get_resource: - kfree(priv); err_alloc: usb_put_hcd(hcd); return ret; @@ -280,22 +263,14 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) usb_phy_shutdown(pdata->otg); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); clk_disable_unprepare(priv->usbclk); - clk_put(priv->usbclk); clk_disable_unprepare(priv->ahbclk); - clk_put(priv->ahbclk); - if (priv->phyclk) { + if (priv->phyclk) clk_disable_unprepare(priv->phyclk); - clk_put(priv->phyclk); - } - - kfree(priv); return 0; } diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bb55eb4a7d48..d7fe287d0678 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -56,15 +56,6 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Errata i693 */ -static struct clk *utmi_p1_fck; -static struct clk *utmi_p2_fck; -static struct clk *xclk60mhsp1_ck; -static struct clk *xclk60mhsp2_ck; -static struct clk *usbhost_p1_fck; -static struct clk *usbhost_p2_fck; -static struct clk *init_60m_fclk; - /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -80,40 +71,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } -/* Erratum i693 workaround sequence */ -static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) -{ - int ret = 0; - - /* Switch to the internal 60 MHz clock */ - ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - clk_enable(usbhost_p1_fck); - clk_enable(usbhost_p2_fck); - - /* Wait 1ms and switch back to the external clock */ - mdelay(1); - ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp1_ck set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp2_ck set parent" - "failed error:%d\n", ret); - - clk_disable(usbhost_p1_fck); - clk_disable(usbhost_p2_fck); -} static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) { @@ -195,50 +152,6 @@ static int omap_ehci_init(struct usb_hcd *hcd) return rc; } -static int omap_ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 temp; - unsigned long flags; - int retval = 0; - - spin_lock_irqsave(&ehci->lock, flags); - - if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { - temp = ehci_readl(ehci, status_reg); - if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { - retval = -EPIPE; - goto done; - } - - temp &= ~PORT_WKCONN_E; - temp |= PORT_WKDISC_E | PORT_WKOC_E; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); - - omap_ehci_erratum_i693(ehci); - - set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); - goto done; - } - - spin_unlock_irqrestore(&ehci->lock, flags); - - /* Handle the hub control events here */ - return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); -done: - spin_unlock_irqrestore(&ehci->lock, flags); - return retval; -} - static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -351,79 +264,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } - /* get clocks */ - utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); - if (IS_ERR(utmi_p1_fck)) { - ret = PTR_ERR(utmi_p1_fck); - dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_add_hcd; - } - - xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); - if (IS_ERR(xclk60mhsp1_ck)) { - ret = PTR_ERR(xclk60mhsp1_ck); - dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_utmi_p1_fck; - } - - utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); - if (IS_ERR(utmi_p2_fck)) { - ret = PTR_ERR(utmi_p2_fck); - dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_xclk60mhsp1_ck; - } - - xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); - if (IS_ERR(xclk60mhsp2_ck)) { - ret = PTR_ERR(xclk60mhsp2_ck); - dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_utmi_p2_fck; - } - - usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(usbhost_p1_fck)) { - ret = PTR_ERR(usbhost_p1_fck); - dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); - goto err_xclk60mhsp2_ck; - } - - usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(usbhost_p2_fck)) { - ret = PTR_ERR(usbhost_p2_fck); - dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; - } - - init_60m_fclk = clk_get(dev, "init_60m_fclk"); - if (IS_ERR(init_60m_fclk)) { - ret = PTR_ERR(init_60m_fclk); - dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbhost_p2_fck; - } return 0; -err_usbhost_p2_fck: - clk_put(usbhost_p2_fck); - -err_usbhost_p1_fck: - clk_put(usbhost_p1_fck); - -err_xclk60mhsp2_ck: - clk_put(xclk60mhsp2_ck); - -err_utmi_p2_fck: - clk_put(utmi_p2_fck); - -err_xclk60mhsp1_ck: - clk_put(xclk60mhsp1_ck); - -err_utmi_p1_fck: - clk_put(utmi_p1_fck); - -err_add_hcd: - usb_remove_hcd(hcd); - err_pm_runtime: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -454,14 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) iounmap(hcd->regs); usb_put_hcd(hcd); - clk_put(utmi_p1_fck); - clk_put(utmi_p2_fck); - clk_put(xclk60mhsp1_ck); - clk_put(xclk60mhsp2_ck); - clk_put(usbhost_p1_fck); - clk_put(usbhost_p2_fck); - clk_put(init_60m_fclk); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -532,7 +367,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = omap_ehci_hub_control, + .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 8892d3642cef..8e7eca62f169 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -13,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/mbus.h> #include <linux/clk.h> -#include <plat/ehci-orion.h> +#include <linux/platform_data/usb-ehci-orion.h> #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 4b1d896d5a22..764e0100b6f4 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -82,10 +82,14 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; + struct usb_ehci_pdata *pdata = dev->dev.platform_data; int irq; int err = -ENOMEM; - BUG_ON(!dev->dev.platform_data); + if (!pdata) { + WARN_ON(1); + return -ENODEV; + } if (usb_disabled()) return -ENODEV; @@ -101,10 +105,18 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) return -ENXIO; } + if (pdata->power_on) { + err = pdata->power_on(dev); + if (err < 0) + return err; + } + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); - if (!hcd) - return -ENOMEM; + if (!hcd) { + err = -ENOMEM; + goto err_power; + } hcd->rsrc_start = res_mem->start; hcd->rsrc_len = resource_size(res_mem); @@ -116,8 +128,10 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) + if (!hcd->regs) { + err = -ENOMEM; goto err_release_region; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err_iounmap; @@ -132,12 +146,17 @@ err_release_region: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); +err_power: + if (pdata->power_off) + pdata->power_off(dev); + return err; } static int __devexit ehci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev->dev.platform_data; usb_remove_hcd(hcd); iounmap(hcd->regs); @@ -145,6 +164,9 @@ static int __devexit ehci_platform_remove(struct platform_device *dev) usb_put_hcd(hcd); platform_set_drvdata(dev, NULL); + if (pdata->power_off) + pdata->power_off(dev); + return 0; } @@ -153,14 +175,32 @@ static int __devexit ehci_platform_remove(struct platform_device *dev) static int ehci_platform_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); bool do_wakeup = device_may_wakeup(dev); + int ret; + + ret = ehci_suspend(hcd, do_wakeup); - return ehci_suspend(hcd, do_wakeup); + if (pdata->power_suspend) + pdata->power_suspend(pdev); + + return ret; } static int ehci_platform_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + + if (pdata->power_on) { + int err = pdata->power_on(pdev); + if (err < 0) + return err; + } ehci_resume(hcd, false); return 0; diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index bbbe89dfd886..fa937d05a02b 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -114,12 +114,6 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); - rv = -EBUSY; - goto err_rmr; - } - irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); @@ -127,9 +121,9 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) goto err_irq; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&op->dev, &res); if (!hcd->regs) { - printk(KERN_ERR "%s: ioremap failed\n", __FILE__); + pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); rv = -ENOMEM; goto err_ioremap; } @@ -139,8 +133,10 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) if (np != NULL) { /* claim we really affected by usb23 erratum */ if (!of_address_to_resource(np, 0, &res)) - ehci->ohci_hcctrl_reg = ioremap(res.start + - OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN); + ehci->ohci_hcctrl_reg = + devm_ioremap(&op->dev, + res.start + OHCI_HCCTRL_OFFSET, + OHCI_HCCTRL_LEN); else pr_debug("%s: no ohci offset in fdt\n", __FILE__); if (!ehci->ohci_hcctrl_reg) { @@ -169,19 +165,13 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) rv = usb_add_hcd(hcd, irq, 0); if (rv) - goto err_ehci; + goto err_ioremap; return 0; -err_ehci: - if (ehci->has_amcc_usb23) - iounmap(ehci->ohci_hcctrl_reg); - iounmap(hcd->regs); err_ioremap: irq_dispose_mapping(irq); err_irq: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_rmr: usb_put_hcd(hcd); return rv; @@ -202,9 +192,7 @@ static int ehci_hcd_ppc_of_remove(struct platform_device *op) usb_remove_hcd(hcd); - iounmap(hcd->regs); irq_dispose_mapping(hcd->irq); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); /* use request_mem_region to test if the ohci driver is loaded. if so * ensure the ohci core is operational. @@ -222,8 +210,6 @@ static int ehci_hcd_ppc_of_remove(struct platform_device *op) pr_debug("%s: no ohci offset in fdt\n", __FILE__); of_node_put(np); } - - iounmap(ehci->ohci_hcctrl_reg); } usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 9bc39ca460c8..4b66374bdc8e 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) else { qtd = list_entry (qh->qtd_list.next, struct ehci_qtd, qtd_list); - /* first qtd may already be partially processed */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) + /* + * first qtd may already be partially processed. + * If we come here during unlink, the QH overlay region + * might have reference to the just unlinked qtd. The + * qtd is updated in qh_completions(). Update the QH + * overlay here. + */ + if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; + } } if (qtd) diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 9d8f1dd57cb3..85b74be202eb 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -16,7 +16,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/of_gpio.h> -#include <plat/ehci.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/usb-phy.h> #define EHCI_INSNREG00(base) (base + 0x90) @@ -128,7 +128,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) } s5p_ehci->hcd = hcd; - s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); + s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { dev_err(&pdev->dev, "Failed to get usbhost clock\n"); @@ -138,7 +138,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) err = clk_enable(s5p_ehci->clk); if (err) - goto fail_clken; + goto fail_clk; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -184,8 +184,6 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) fail_io: clk_disable(s5p_ehci->clk); -fail_clken: - clk_put(s5p_ehci->clk); fail_clk: usb_put_hcd(hcd); return err; @@ -203,7 +201,6 @@ static int __devexit s5p_ehci_remove(struct platform_device *pdev) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); clk_disable(s5p_ehci->clk); - clk_put(s5p_ehci->clk); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 58c96bd50d22..efad02d947f2 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -40,7 +40,7 @@ static int ehci_sead3_setup(struct usb_hcd *hcd) ehci->need_io_watchdog = 0; /* Set burst length to 16 words. */ - ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]); return ret; } @@ -112,17 +112,11 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { pr_debug("ioremap failed"); ret = -ENOMEM; - goto err2; + goto err1; } /* Root hub has integrated TT. */ @@ -135,9 +129,6 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) return ret; } - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return ret; @@ -148,8 +139,6 @@ static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index b3f1e3650da0..6081e1ed3ac9 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -125,33 +125,27 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto fail_request_resource; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -ENXIO; - goto fail_ioremap; + goto fail_request_resource; } - priv = kmalloc(sizeof(struct ehci_sh_priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv), + GFP_KERNEL); if (!priv) { dev_dbg(&pdev->dev, "error allocating priv data\n"); ret = -ENOMEM; - goto fail_alloc; + goto fail_request_resource; } /* These are optional, we don't care if they fail */ - priv->fclk = clk_get(&pdev->dev, "usb_fck"); + priv->fclk = devm_clk_get(&pdev->dev, "usb_fck"); if (IS_ERR(priv->fclk)) priv->fclk = NULL; - priv->iclk = clk_get(&pdev->dev, "usb_ick"); + priv->iclk = devm_clk_get(&pdev->dev, "usb_ick"); if (IS_ERR(priv->iclk)) priv->iclk = NULL; @@ -176,14 +170,6 @@ fail_add_hcd: clk_disable(priv->iclk); clk_disable(priv->fclk); - clk_put(priv->iclk); - clk_put(priv->fclk); - - kfree(priv); -fail_alloc: - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); fail_request_resource: usb_put_hcd(hcd); fail_create_hcd: @@ -198,19 +184,12 @@ static int __exit ehci_hcd_sh_remove(struct platform_device *pdev) struct usb_hcd *hcd = priv->hcd; usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); clk_disable(priv->fclk); clk_disable(priv->iclk); - clk_put(priv->fclk); - clk_put(priv->iclk); - - kfree(priv); - return 0; } diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 950e95efa381..6223d1757848 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -27,7 +27,7 @@ #include <linux/of_gpio.h> #include <linux/pm_runtime.h> -#include <mach/usb_phy.h> +#include <linux/usb/tegra_usb_phy.h> #include <mach/iomap.h> #define TEGRA_USB_DMA_ALIGN 32 @@ -49,7 +49,7 @@ static void tegra_ehci_power_up(struct usb_hcd *hcd) clk_prepare_enable(tegra->emc_clk); clk_prepare_enable(tegra->clk); - tegra_usb_phy_power_on(tegra->phy); + usb_phy_set_suspend(&tegra->phy->u_phy, 0); tegra->host_resumed = 1; } @@ -58,7 +58,7 @@ static void tegra_ehci_power_down(struct usb_hcd *hcd) struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); tegra->host_resumed = 0; - tegra_usb_phy_power_off(tegra->phy); + usb_phy_set_suspend(&tegra->phy->u_phy, 1); clk_disable_unprepare(tegra->clk); clk_disable_unprepare(tegra->emc_clk); } @@ -634,7 +634,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) setup_vbus_gpio(pdev, pdata); - tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); + tegra = devm_kzalloc(&pdev->dev, sizeof(struct tegra_ehci_hcd), + GFP_KERNEL); if (!tegra) return -ENOMEM; @@ -642,13 +643,12 @@ static int tegra_ehci_probe(struct platform_device *pdev) dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Unable to create HCD\n"); - err = -ENOMEM; - goto fail_hcd; + return -ENOMEM; } platform_set_drvdata(pdev, tegra); - tegra->clk = clk_get(&pdev->dev, NULL); + tegra->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(tegra->clk)) { dev_err(&pdev->dev, "Can't get ehci clock\n"); err = PTR_ERR(tegra->clk); @@ -657,9 +657,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = clk_prepare_enable(tegra->clk); if (err) - goto fail_clken; + goto fail_clk; - tegra->emc_clk = clk_get(&pdev->dev, "emc"); + tegra->emc_clk = devm_clk_get(&pdev->dev, "emc"); if (IS_ERR(tegra->emc_clk)) { dev_err(&pdev->dev, "Can't get emc clock\n"); err = PTR_ERR(tegra->emc_clk); @@ -677,7 +677,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = ioremap(res->start, resource_size(res)); + hcd->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!hcd->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); err = -ENOMEM; @@ -702,7 +702,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) default: err = -ENODEV; dev_err(&pdev->dev, "unknown usb instance\n"); - goto fail_phy; + goto fail_io; } } @@ -712,10 +712,12 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (IS_ERR(tegra->phy)) { dev_err(&pdev->dev, "Failed to open USB phy\n"); err = -ENXIO; - goto fail_phy; + goto fail_io; } - err = tegra_usb_phy_power_on(tegra->phy); + usb_phy_init(&tegra->phy->u_phy); + + err = usb_phy_set_suspend(&tegra->phy->u_phy, 0); if (err) { dev_err(&pdev->dev, "Failed to power on the phy\n"); goto fail; @@ -733,7 +735,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { - tegra->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + tegra->transceiver = + devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, &hcd->self); } @@ -757,25 +760,16 @@ static int tegra_ehci_probe(struct platform_device *pdev) fail: #ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); - usb_put_phy(tegra->transceiver); - } #endif - tegra_usb_phy_close(tegra->phy); -fail_phy: - iounmap(hcd->regs); + usb_phy_shutdown(&tegra->phy->u_phy); fail_io: clk_disable_unprepare(tegra->emc_clk); - clk_put(tegra->emc_clk); fail_emc_clk: clk_disable_unprepare(tegra->clk); -fail_clken: - clk_put(tegra->clk); fail_clk: usb_put_hcd(hcd); -fail_hcd: - kfree(tegra); return err; } @@ -792,25 +786,19 @@ static int tegra_ehci_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); #ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); - usb_put_phy(tegra->transceiver); - } #endif usb_remove_hcd(hcd); usb_put_hcd(hcd); - tegra_usb_phy_close(tegra->phy); - iounmap(hcd->regs); + usb_phy_shutdown(&tegra->phy->u_phy); clk_disable_unprepare(tegra->clk); - clk_put(tegra->clk); clk_disable_unprepare(tegra->emc_clk); - clk_put(tegra->emc_clk); - kfree(tegra); return 0; } diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c index eb896a2c8f2e..20dbdcbe9b0f 100644 --- a/drivers/usb/host/ehci-timer.c +++ b/drivers/usb/host/ehci-timer.c @@ -118,7 +118,8 @@ static void ehci_poll_ASS(struct ehci_hcd *ehci) ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true); return; } - ehci_warn(ehci, "Waited too long for the async schedule status, giving up\n"); + ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n", + want, actual); } ehci->ASS_poll_count = 0; @@ -163,7 +164,8 @@ static void ehci_poll_PSS(struct ehci_hcd *ehci) ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true); return; } - ehci_warn(ehci, "Waited too long for the periodic schedule status, giving up\n"); + ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n", + want, actual); } ehci->PSS_poll_count = 0; diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index 4d147c4e33f5..96722bfebc84 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -16,6 +16,7 @@ * */ +#include <linux/of.h> #include <linux/platform_device.h> static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev) @@ -106,17 +107,11 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { pr_debug("ioremap failed"); ret = -ENOMEM; - goto err2; + goto err1; } ehci = hcd_to_ehci(hcd); @@ -129,9 +124,6 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) return ret; } - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); return ret; @@ -142,14 +134,18 @@ static int vt8500_ehci_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); return 0; } +static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible = "via,vt8500-ehci", }, + { .compatible = "wm,prizm-ehci", }, + {} +}; + static struct platform_driver vt8500_ehci_driver = { .probe = vt8500_ehci_drv_probe, .remove = vt8500_ehci_drv_remove, @@ -157,7 +153,9 @@ static struct platform_driver vt8500_ehci_driver = { .driver = { .name = "vt8500-ehci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(vt8500_ehci_ids), } }; MODULE_ALIAS("platform:vt8500-ehci"); +MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 39f24fa37ebe..6a3f921a5d76 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -152,12 +152,6 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); - rv = -EBUSY; - goto err_rmr; - } - irq = irq_of_parse_and_map(dn, 0); if (!irq) { printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); @@ -165,11 +159,11 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) goto err_irq; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_request_and_ioremap(&op->dev, &res); if (!hcd->regs) { - printk(KERN_ERR "%s: ioremap failed\n", __FILE__); + pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); rv = -ENOMEM; - goto err_ioremap; + goto err_irq; } ehci = hcd_to_ehci(hcd); @@ -200,12 +194,7 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) if (rv == 0) return 0; - iounmap(hcd->regs); - -err_ioremap: err_irq: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_rmr: usb_put_hcd(hcd); return rv; @@ -227,9 +216,6 @@ static int ehci_hcd_xilinx_of_remove(struct platform_device *op) usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 2dc8a40e39d7..8f18538e0ff7 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -261,8 +261,7 @@ static void move_head_to_tail(struct list_head *list) struct list_head *node = list->next; if (!list_empty(list)) { - list_del(node); - list_add_tail(node, list); + list_move_tail(node, list); } } diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 22ff6b3a676f..1e771292383f 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -133,6 +133,8 @@ static int usb_get_ver_info(struct device_node *np) ver = FSL_USB_VER_1_6; else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) ver = FSL_USB_VER_2_2; + else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.4")) + ver = FSL_USB_VER_2_4; else /* for previous controller versions */ ver = FSL_USB_VER_OLD; diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h index 87b29fd971b4..c005770a73e9 100644 --- a/drivers/usb/host/imx21-hcd.h +++ b/drivers/usb/host/imx21-hcd.h @@ -24,7 +24,7 @@ #ifndef __LINUX_IMX21_HCD_H__ #define __LINUX_IMX21_HCD_H__ -#include <mach/mx21-usbhost.h> +#include <linux/platform_data/usb-mx2.h> #define NUM_ISO_ETDS 2 #define USB_NUM_ETD 32 diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 2ed112d3e159..256326322cfd 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -543,12 +543,12 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid, short_ok ? "" : "not_", PTD_GET_COUNT(ptd), ep->maxpacket, len); + /* save the data underrun error code for later and + * proceed with the status stage + */ + urb->actual_length += PTD_GET_COUNT(ptd); if (usb_pipecontrol(urb->pipe)) { ep->nextpid = USB_PID_ACK; - /* save the data underrun error code for later and - * proceed with the status stage - */ - urb->actual_length += PTD_GET_COUNT(ptd); BUG_ON(urb->actual_length > urb->transfer_buffer_length); if (urb->status == -EINPROGRESS) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a665b3eaa746..0bf72f943b00 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -467,7 +467,8 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ at91_for_each_port(port) { - if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { + if (gpio_is_valid(pdata->overcurrent_pin[port]) && + gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } @@ -570,6 +571,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata) { at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i]; diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 269b1e0f7691..0b815a856811 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -17,7 +17,7 @@ #include <linux/clk.h> #include <mach/da8xx.h> -#include <mach/usb.h> +#include <linux/platform_data/usb-davinci.h> #ifndef CONFIG_ARCH_DAVINCI_DA8XX #error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX." diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index fc3091bd2379..20a50081f922 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -14,7 +14,7 @@ #include <linux/clk.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <mach/ohci.h> +#include <linux/platform_data/usb-exynos.h> #include <plat/usb-phy.h> struct exynos_ohci_hcd { diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 2364098ea83c..4a1d64d92338 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1049,7 +1049,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_at91_driver #endif -#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX) +#ifdef CONFIG_ARCH_LPC32XX #include "ohci-nxp.c" #define PLATFORM_DRIVER usb_hcd_nxp_driver #endif diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index a446386bf779..e068f034cb9b 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -2,7 +2,6 @@ * driver for NXP USB Host devices * * Currently supported OHCI host devices: - * - Philips PNX4008 * - NXP LPC32xx * * Authors: Dmitry Chigirev <source@mvista.com> @@ -66,38 +65,6 @@ static struct clk *usb_pll_clk; static struct clk *usb_dev_clk; static struct clk *usb_otg_clk; -static void isp1301_configure_pnx4008(void) -{ - /* PNX4008 only supports DAT_SE0 USB mode */ - /* PNX4008 R2A requires setting the MAX603 to output 3.6V */ - /* Power up externel charge-pump */ - - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, - ~(MC1_DAT_SE0 | MC1_SPEED_REG)); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_2, - MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, - ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, - ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, - 0xFF); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, - 0xFF); -} - static void isp1301_configure_lpc32xx(void) { /* LPC32XX only supports DAT_SE0 USB mode */ @@ -149,10 +116,7 @@ static void isp1301_configure_lpc32xx(void) static void isp1301_configure(void) { - if (machine_is_pnx4008()) - isp1301_configure_pnx4008(); - else - isp1301_configure_lpc32xx(); + isp1301_configure_lpc32xx(); } static inline void isp1301_vbus_on(void) @@ -241,47 +205,6 @@ static const struct hc_driver ohci_nxp_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static void nxp_set_usb_bits(void) -{ - if (machine_is_pnx4008()) { - start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); - start_int_ack(SE_USB_OTG_ATX_INT_N); - start_int_umask(SE_USB_OTG_ATX_INT_N); - - start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); - start_int_ack(SE_USB_OTG_TIMER_INT); - start_int_umask(SE_USB_OTG_TIMER_INT); - - start_int_set_rising_edge(SE_USB_I2C_INT); - start_int_ack(SE_USB_I2C_INT); - start_int_umask(SE_USB_I2C_INT); - - start_int_set_rising_edge(SE_USB_INT); - start_int_ack(SE_USB_INT); - start_int_umask(SE_USB_INT); - - start_int_set_rising_edge(SE_USB_NEED_CLK_INT); - start_int_ack(SE_USB_NEED_CLK_INT); - start_int_umask(SE_USB_NEED_CLK_INT); - - start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); - start_int_ack(SE_USB_AHB_NEED_CLK_INT); - start_int_umask(SE_USB_AHB_NEED_CLK_INT); - } -} - -static void nxp_unset_usb_bits(void) -{ - if (machine_is_pnx4008()) { - start_int_mask(SE_USB_OTG_ATX_INT_N); - start_int_mask(SE_USB_OTG_TIMER_INT); - start_int_mask(SE_USB_I2C_INT); - start_int_mask(SE_USB_INT); - start_int_mask(SE_USB_NEED_CLK_INT); - start_int_mask(SE_USB_AHB_NEED_CLK_INT); - } -} - static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) { struct usb_hcd *hcd = 0; @@ -355,7 +278,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); if (IS_ERR(usb_otg_clk)) { dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); - ret = PTR_ERR(usb_dev_clk); + ret = PTR_ERR(usb_otg_clk); goto out6; } @@ -376,9 +299,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) goto out8; } - /* Set all USB bits in the Start Enable register */ - nxp_set_usb_bits(); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Failed to get MEM resource\n"); @@ -413,7 +333,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) nxp_stop_hc(); out8: - nxp_unset_usb_bits(); usb_put_hcd(hcd); out7: clk_disable(usb_otg_clk); @@ -441,7 +360,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) nxp_stop_hc(); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - nxp_unset_usb_bits(); clk_disable(usb_pll_clk); clk_put(usb_pll_clk); clk_disable(usb_dev_clk); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index e7d75d295988..4531d03503c3 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include <mach/hardware.h> @@ -403,8 +403,6 @@ err0: static inline void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - usb_remove_hcd(hcd); if (!IS_ERR_OR_NULL(hcd->phy)) { (void) otg_set_host(hcd->phy->otg, 0); diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 670c7059c9ae..e24ec9f79164 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -83,10 +83,14 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; + struct usb_ohci_pdata *pdata = dev->dev.platform_data; int irq; int err = -ENOMEM; - BUG_ON(!dev->dev.platform_data); + if (!pdata) { + WARN_ON(1); + return -ENODEV; + } if (usb_disabled()) return -ENODEV; @@ -103,10 +107,18 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) return -ENXIO; } + if (pdata->power_on) { + err = pdata->power_on(dev); + if (err < 0) + return err; + } + hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); - if (!hcd) - return -ENOMEM; + if (!hcd) { + err = -ENOMEM; + goto err_power; + } hcd->rsrc_start = res_mem->start; hcd->rsrc_len = resource_size(res_mem); @@ -118,8 +130,10 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) + if (!hcd->regs) { + err = -ENOMEM; goto err_release_region; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err_iounmap; @@ -134,12 +148,17 @@ err_release_region: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); +err_power: + if (pdata->power_off) + pdata->power_off(dev); + return err; } static int __devexit ohci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_ohci_pdata *pdata = dev->dev.platform_data; usb_remove_hcd(hcd); iounmap(hcd->regs); @@ -147,6 +166,9 @@ static int __devexit ohci_platform_remove(struct platform_device *dev) usb_put_hcd(hcd); platform_set_drvdata(dev, NULL); + if (pdata->power_off) + pdata->power_off(dev); + return 0; } @@ -154,12 +176,28 @@ static int __devexit ohci_platform_remove(struct platform_device *dev) static int ohci_platform_suspend(struct device *dev) { + struct usb_ohci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + + if (pdata->power_suspend) + pdata->power_suspend(pdev); + return 0; } static int ohci_platform_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ohci_pdata *pdata = dev->platform_data; + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + + if (pdata->power_on) { + int err = pdata->power_on(pdev); + if (err < 0) + return err; + } ohci_finish_controller_resume(hcd); return 0; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e1a3cc6d28dc..2bf11440b010 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -23,9 +23,11 @@ #include <linux/signal.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> -#include <mach/ohci.h> -#include <mach/pxa3xx-u2d.h> +#include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/usb-pxa3xx-ulpi.h> /* * UHC: USB Host Controller (OHCI-like) register definitions @@ -272,6 +274,67 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) clk_disable_unprepare(ohci->clk); } +#ifdef CONFIG_OF +static const struct of_device_id pxa_ohci_dt_ids[] = { + { .compatible = "marvell,pxa-ohci" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); + +static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); + +static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pxaohci_platform_data *pdata; + u32 tmp; + + if (!np) + return 0; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pxa_ohci_dma_mask; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (of_get_property(np, "marvell,enable-port1", NULL)) + pdata->flags |= ENABLE_PORT1; + if (of_get_property(np, "marvell,enable-port2", NULL)) + pdata->flags |= ENABLE_PORT2; + if (of_get_property(np, "marvell,enable-port3", NULL)) + pdata->flags |= ENABLE_PORT3; + if (of_get_property(np, "marvell,port-sense-low", NULL)) + pdata->flags |= POWER_SENSE_LOW; + if (of_get_property(np, "marvell,power-control-low", NULL)) + pdata->flags |= POWER_CONTROL_LOW; + if (of_get_property(np, "marvell,no-oc-protection", NULL)) + pdata->flags |= NO_OC_PROTECTION; + if (of_get_property(np, "marvell,oc-mode-perport", NULL)) + pdata->flags |= OC_MODE_PERPORT; + if (!of_property_read_u32(np, "marvell,power-on-delay", &tmp)) + pdata->power_on_delay = tmp; + if (!of_property_read_u32(np, "marvell,port-mode", &tmp)) + pdata->port_mode = tmp; + if (!of_property_read_u32(np, "marvell,power-budget", &tmp)) + pdata->power_budget = tmp; + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif /*-------------------------------------------------------------------------*/ @@ -297,6 +360,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device struct resource *r; struct clk *usb_clk; + retval = ohci_pxa_of_init(pdev); + if (retval) + return retval; + inf = pdev->dev.platform_data; if (!inf) @@ -544,6 +611,7 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { .driver = { .name = "pxa27x-ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pxa_ohci_dt_ids), #ifdef CONFIG_PM .pm = &ohci_hcd_pxa27x_pm_ops, #endif diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 664c869eb096..0d2309ca471e 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -21,7 +21,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> -#include <plat/usb-control.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> #define valid_port(idx) ((idx) == 1 || (idx) == 2) diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index 41e378f17c66..84201cd1a472 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver, goto err3; } - retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index df0828cb2aa3..966d1484ee79 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -75,7 +75,9 @@ #define NB_PIF0_PWRDOWN_1 0x01100013 #define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB2PRM 0xD4 #define USB_INTEL_USB3_PSSEN 0xD8 +#define USB_INTEL_USB3PRM 0xDC static struct amd_chipset_info { struct pci_dev *nb_dev; @@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) return; } - ports_available = 0xffffffff; + /* Read USB3PRM, the USB 3.0 Port Routing Mask Register + * Indicate the ports that can be changed from OS. + */ + pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n", + ports_available); + /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable - * Register, to turn on SuperSpeed terminations for all - * available ports. + * Register, to turn on SuperSpeed terminations for the + * switchable ports. */ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, cpu_to_le32(ports_available)); @@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " "under xHCI: 0x%x\n", ports_available); - ports_available = 0xffffffff; + /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register + * Indicate the USB 2.0 ports to be controlled by the xHCI host. + */ + + pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n", + ports_available); + /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to * switch the USB 2.0 power and data lines over to the xHCI * host. @@ -800,6 +819,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) } EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) +{ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); +} +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); + /** * PCI Quirks for xHCI. * @@ -815,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) void __iomem *op_reg_base; u32 val; int timeout; + int len = pci_resource_len(pdev, 0); if (!mmio_resource_enabled(pdev, 0)) return; - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + base = ioremap_nocache(pci_resource_start(pdev, 0), len); if (base == NULL) return; @@ -830,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) */ ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET); do { + if ((ext_cap_offset + sizeof(val)) > len) { + /* We're reading garbage from the controller */ + dev_warn(&pdev->dev, + "xHCI controller failing to respond"); + return; + } + if (!ext_cap_offset) /* We've reached the end of the extended capabilities */ goto hc_init; + val = readl(base + ext_cap_offset); if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY) break; @@ -863,9 +897,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index b1002a8ef96f..7f69a39163ce 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -10,10 +10,12 @@ void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_dev_put(void) {} +static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} #endif /* CONFIG_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 4c634eb56358..fcc09e5ec0ad 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2029,15 +2029,14 @@ static int r8a66597_get_frame(struct usb_hcd *hcd) static void collect_usb_address_map(struct usb_device *udev, unsigned long *map) { int chix; + struct usb_device *childdev; if (udev->state == USB_STATE_CONFIGURED && udev->parent && udev->parent->devnum > 1 && udev->parent->descriptor.bDeviceClass == USB_CLASS_HUB) map[udev->devnum/32] |= (1 << (udev->devnum % 32)); - for (chix = 0; chix < udev->maxchild; chix++) { - struct usb_device *childdev = udev->children[chix]; - + usb_hub_for_each_child(udev, chix, childdev) { if (childdev) collect_usb_address_map(childdev, map); } diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 91ce1c02e617..619b05f42d4f 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -156,7 +156,7 @@ static void setup_packet( writeb(SL_SETUP /* | ep->epnum */, data_reg); writeb(usb_pipedevice(urb->pipe), data_reg); - /* always OUT/data0 */ ; + /* always OUT/data0 */ sl811_write(sl811, bank + SL11H_HOSTCTLREG, control | SL11H_HCTLMASK_OUT); ep->length = 0; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index e4db350602b8..4b9e9aba2665 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd"; #define PLATFORM_DRIVER uhci_grlib_driver #endif +#ifdef CONFIG_USB_UHCI_PLATFORM +#include "uhci-platform.c" +#define PLATFORM_DRIVER uhci_platform_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) #error "missing bus glue for uhci-hcd" #endif diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c new file mode 100644 index 000000000000..e4780491df4a --- /dev/null +++ b/drivers/usb/host/uhci-platform.c @@ -0,0 +1,157 @@ +/* + * Generic UHCI HCD (Host Controller Driver) for Platform Devices + * + * Copyright (c) 2011 Tony Prisk <linux@prisktech.co.nz> + * + * This file is based on uhci-grlib.c + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu + */ + +#include <linux/of.h> +#include <linux/platform_device.h> + +static int uhci_platform_init(struct usb_hcd *hcd) +{ + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + + uhci->rh_numports = uhci_count_ports(hcd); + + /* Set up pointers to to generic functions */ + uhci->reset_hc = uhci_generic_reset_hc; + uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc; + + /* No special actions need to be taken for the functions below */ + uhci->configure_hc = NULL; + uhci->resume_detect_interrupts_are_broken = NULL; + uhci->global_suspend_mode_is_broken = NULL; + + /* Reset if the controller isn't already safely quiescent. */ + check_and_reset_hc(uhci); + return 0; +} + +static const struct hc_driver uhci_platform_hc_driver = { + .description = hcd_name, + .product_desc = "Generic UHCI Host Controller", + .hcd_priv_size = sizeof(struct uhci_hcd), + + /* Generic hardware linkage */ + .irq = uhci_irq, + .flags = HCD_MEMORY | HCD_USB11, + + /* Basic lifecycle operations */ + .reset = uhci_platform_init, + .start = uhci_start, +#ifdef CONFIG_PM + .pci_suspend = NULL, + .pci_resume = NULL, + .bus_suspend = uhci_rh_suspend, + .bus_resume = uhci_rh_resume, +#endif + .stop = uhci_stop, + + .urb_enqueue = uhci_urb_enqueue, + .urb_dequeue = uhci_urb_dequeue, + + .endpoint_disable = uhci_hcd_endpoint_disable, + .get_frame_number = uhci_hcd_get_frame_number, + + .hub_status_data = uhci_hub_status_data, + .hub_control = uhci_hub_control, +}; + + +static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct uhci_hcd *uhci; + struct resource *res; + int ret; + + if (usb_disabled()) + return -ENODEV; + + hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, + pdev->name); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_err("%s: request_mem_region failed\n", __func__); + ret = -EBUSY; + goto err_rmr; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_err("%s: ioremap failed\n", __func__); + ret = -ENOMEM; + goto err_irq; + } + uhci = hcd_to_uhci(hcd); + + uhci->regs = hcd->regs; + + ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED | + IRQF_SHARED); + if (ret) + goto err_uhci; + + return 0; + +err_uhci: + iounmap(hcd->regs); +err_irq: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_rmr: + usb_put_hcd(hcd); + + return ret; +} + +static int uhci_hcd_platform_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* Make sure the controller is quiescent and that we're not using it + * any more. This is mainly for the benefit of programs which, like kexec, + * expect the hardware to be idle: not doing DMA or generating IRQs. + * + * This routine may be called in a damaged or failing kernel. Hence we + * do not acquire the spinlock before shutting down the controller. + */ +static void uhci_hcd_platform_shutdown(struct platform_device *op) +{ + struct usb_hcd *hcd = dev_get_drvdata(&op->dev); + + uhci_hc_died(hcd_to_uhci(hcd)); +} + +static const struct of_device_id platform_uhci_ids[] = { + { .compatible = "platform-uhci", }, + {} +}; + +static struct platform_driver uhci_platform_driver = { + .probe = uhci_hcd_platform_probe, + .remove = uhci_hcd_platform_remove, + .shutdown = uhci_hcd_platform_shutdown, + .driver = { + .name = "platform-uhci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(platform_uhci_ids), + }, +}; diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index 1e141f755b26..c3a647816af0 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -238,16 +238,16 @@ static struct hc_driver whc_hc_driver = { static int whc_probe(struct umc_dev *umc) { - int ret = -ENOMEM; + int ret; struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc = NULL; - struct whc *whc = NULL; + struct wusbhc *wusbhc; + struct whc *whc; struct device *dev = &umc->dev; usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); if (usb_hcd == NULL) { dev_err(dev, "unable to create hcd\n"); - goto error; + return -ENOMEM; } usb_hcd->wireless = 1; diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 76083ae92138..dc31c425ce01 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -436,7 +436,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u int i; int ntds = 0; struct whc_std *std = NULL; - struct whc_page_list_entry *entry; + struct whc_page_list_entry *new_pl_virt; dma_addr_t prev_end = 0; size_t pl_len; int p = 0; @@ -508,12 +508,15 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); - if (std->pl_virt == NULL) { + new_pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); + if (new_pl_virt == NULL) { + kfree(std->pl_virt); + std->pl_virt = NULL; return -ENOMEM; } + std->pl_virt = new_pl_virt; - for (;p < std->num_pointers; p++, entry++) { + for (;p < std->num_pointers; p++) { std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 74bfc868b7ad..aa90ad4d4fd5 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -29,7 +29,7 @@ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ PORT_RC | PORT_PLC | PORT_PE) -/* usb 1.1 root hub device descriptor */ +/* USB 3.0 BOS descriptor and a capability descriptor, combined */ static u8 usb_bos_descriptor [] = { USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */ USB_DT_BOS, /* __u8 bDescriptorType */ @@ -422,7 +422,7 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, xhci_writel(xhci, temp, port_array[port_id]); } -void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, +static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u16 wake_mask) { u32 temp; @@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg) * when this bit is set. */ pls |= USB_PORT_STAT_CONNECTION; + } else { + /* + * If CAS bit isn't set but the Port is already at + * Compliance Mode, fake a connection so the USB core + * notices the Compliance state and resets the port. + * This resolves an issue generated by the SN65LVPE502CP + * in which sometimes the port enters compliance mode + * caused by a delay on the host-device negotiation. + */ + if (pls == USB_SS_PORT_LS_COMP_MOD) + pls |= USB_PORT_STAT_CONNECTION; } + /* update status field */ *status |= pls; } +/* + * Function for Compliance Mode Quirk. + * + * This Function verifies if all xhc USB3 ports have entered U0, if so, + * the compliance mode timer is deleted. A port won't enter + * compliance mode if it has previously entered U0. + */ +void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) +{ + u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); + + if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) + return; + + if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { + xhci->port_status_u0 |= 1 << wIndex; + if (xhci->port_status_u0 == all_ports_seen_u0) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n"); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n"); + } + } +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { xhci_hub_report_link_state(&status, temp); + /* + * Verify if all USB3 Ports Have entered U0 already. + * Delete Compliance Mode Timer if so. + */ + xhci_del_comp_mod_timer(xhci, temp, wIndex); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; @@ -766,6 +808,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); + + temp = usb_acpi_power_manageable(hcd->self.root_hub, + wIndex); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + wIndex, true); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); @@ -865,6 +913,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_disable_port(hcd, xhci, wIndex, port_array[wIndex], temp); break; + case USB_PORT_FEAT_POWER: + xhci_writel(xhci, temp & ~PORT_POWER, + port_array[wIndex]); + + temp = usb_acpi_power_manageable(hcd->self.root_hub, + wIndex); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + wIndex, false); + break; default: goto error; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 77689bd64cac..487bc083dead 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1772,6 +1772,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; + struct xhci_cd *cur_cd, *next_cd; unsigned long flags; int size; int i, j, num_ports; @@ -1795,6 +1796,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; xhci_dbg(xhci, "Freed command ring\n"); + list_for_each_entry_safe(cur_cd, next_cd, + &xhci->cancel_cmd_list, cancel_cmd_list) { + list_del(&cur_cd->cancel_cmd_list); + kfree(cur_cd); + } for (i = 1; i < MAX_HC_SLOTS; ++i) xhci_free_virt_device(xhci, i); @@ -2340,6 +2346,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; + INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18b231b0c5d3..8345d7c23061 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -94,11 +94,22 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; + xhci->quirks |= XHCI_AVOID_BEI; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 689bc18b051d..df90fe51b4aa 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -118,7 +118,7 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_hcd; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -EFAULT; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8275645889da..c6ebb176dc4f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -145,29 +145,37 @@ static void next_trb(struct xhci_hcd *xhci, */ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - union xhci_trb *next; unsigned long long addr; ring->deq_updates++; - /* If this is not event ring, there is one more usable TRB */ + /* + * If this is not event ring, and the dequeue pointer + * is not on a link TRB, there is one more usable TRB + */ if (ring->type != TYPE_EVENT && !last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) ring->num_trbs_free++; - next = ++(ring->dequeue); - /* Update the dequeue pointer further if that was a link TRB or we're at - * the end of an event ring segment (which doesn't have link TRBS) - */ - while (last_trb(xhci, ring, ring->deq_seg, next)) { - if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, - ring, ring->deq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + do { + /* + * Update the dequeue pointer further if that was a link TRB or + * we're at the end of an event ring segment (which doesn't have + * link TRBS) + */ + if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) { + if (ring->type == TYPE_EVENT && + last_trb_on_last_seg(xhci, ring, + ring->deq_seg, ring->dequeue)) { + ring->cycle_state = (ring->cycle_state ? 0 : 1); + } + ring->deq_seg = ring->deq_seg->next; + ring->dequeue = ring->deq_seg->trbs; + } else { + ring->dequeue++; } - ring->deq_seg = ring->deq_seg->next; - ring->dequeue = ring->deq_seg->trbs; - next = ring->dequeue; - } + } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)); + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); } @@ -272,12 +280,123 @@ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { + if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) + return; + xhci_dbg(xhci, "// Ding dong!\n"); xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]); /* Flush PCI posted writes */ xhci_readl(xhci, &xhci->dba->doorbell[0]); } +static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) +{ + u64 temp_64; + int ret; + + xhci_dbg(xhci, "Abort command ring\n"); + + if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) { + xhci_dbg(xhci, "The command ring isn't running, " + "Have the command ring been stopped?\n"); + return 0; + } + + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if (!(temp_64 & CMD_RING_RUNNING)) { + xhci_dbg(xhci, "Command ring had been stopped\n"); + return 0; + } + xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, + &xhci->op_regs->cmd_ring); + + /* Section 4.6.1.2 of xHCI 1.0 spec says software should + * time the completion od all xHCI commands, including + * the Command Abort operation. If software doesn't see + * CRR negated in a timely manner (e.g. longer than 5 + * seconds), then it should assume that the there are + * larger problems with the xHC and assert HCRST. + */ + ret = handshake(xhci, &xhci->op_regs->cmd_ring, + CMD_RING_RUNNING, 0, 5 * 1000 * 1000); + if (ret < 0) { + xhci_err(xhci, "Stopped the command ring failed, " + "maybe the host is dead\n"); + xhci->xhc_state |= XHCI_STATE_DYING; + xhci_quiesce(xhci); + xhci_halt(xhci); + return -ESHUTDOWN; + } + + return 0; +} + +static int xhci_queue_cd(struct xhci_hcd *xhci, + struct xhci_command *command, + union xhci_trb *cmd_trb) +{ + struct xhci_cd *cd; + cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC); + if (!cd) + return -ENOMEM; + INIT_LIST_HEAD(&cd->cancel_cmd_list); + + cd->command = command; + cd->cmd_trb = cmd_trb; + list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list); + + return 0; +} + +/* + * Cancel the command which has issue. + * + * Some commands may hang due to waiting for acknowledgement from + * usb device. It is outside of the xHC's ability to control and + * will cause the command ring is blocked. When it occurs software + * should intervene to recover the command ring. + * See Section 4.6.1.1 and 4.6.1.2 + */ +int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, + union xhci_trb *cmd_trb) +{ + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&xhci->lock, flags); + + if (xhci->xhc_state & XHCI_STATE_DYING) { + xhci_warn(xhci, "Abort the command ring," + " but the xHCI is dead.\n"); + retval = -ESHUTDOWN; + goto fail; + } + + /* queue the cmd desriptor to cancel_cmd_list */ + retval = xhci_queue_cd(xhci, command, cmd_trb); + if (retval) { + xhci_warn(xhci, "Queuing command descriptor failed.\n"); + goto fail; + } + + /* abort command ring */ + retval = xhci_abort_cmd_ring(xhci); + if (retval) { + xhci_err(xhci, "Abort command ring failed\n"); + if (unlikely(retval == -ESHUTDOWN)) { + spin_unlock_irqrestore(&xhci->lock, flags); + usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + xhci_dbg(xhci, "xHCI host controller is dead.\n"); + return retval; + } + } + +fail: + spin_unlock_irqrestore(&xhci->lock, flags); + return retval; +} + void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, @@ -1051,6 +1170,20 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci, } } +/* Complete the command and detele it from the devcie's command queue. + */ +static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, + struct xhci_command *command, u32 status) +{ + command->status = status; + list_del(&command->cmd_list); + if (command->completion) + complete(command->completion); + else + xhci_free_command(xhci, command); +} + + /* Check to see if a command in the device's command queue matches this one. * Signal the completion or free the command, and return 1. Return 0 if the * completed command isn't at the head of the command list. @@ -1069,15 +1202,144 @@ static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, if (xhci->cmd_ring->dequeue != command->command_trb) return 0; - command->status = GET_COMP_CODE(le32_to_cpu(event->status)); - list_del(&command->cmd_list); - if (command->completion) - complete(command->completion); - else - xhci_free_command(xhci, command); + xhci_complete_cmd_in_cmd_wait_list(xhci, command, + GET_COMP_CODE(le32_to_cpu(event->status))); return 1; } +/* + * Finding the command trb need to be cancelled and modifying it to + * NO OP command. And if the command is in device's command wait + * list, finishing and freeing it. + * + * If we can't find the command trb, we think it had already been + * executed. + */ +static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) +{ + struct xhci_segment *cur_seg; + union xhci_trb *cmd_trb; + u32 cycle_state; + + if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) + return; + + /* find the current segment of command ring */ + cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, + xhci->cmd_ring->dequeue, &cycle_state); + + /* find the command trb matched by cd from command ring */ + for (cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb != xhci->cmd_ring->enqueue; + next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) { + /* If the trb is link trb, continue */ + if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3])) + continue; + + if (cur_cd->cmd_trb == cmd_trb) { + + /* If the command in device's command list, we should + * finish it and free the command structure. + */ + if (cur_cd->command) + xhci_complete_cmd_in_cmd_wait_list(xhci, + cur_cd->command, COMP_CMD_STOP); + + /* get cycle state from the origin command trb */ + cycle_state = le32_to_cpu(cmd_trb->generic.field[3]) + & TRB_CYCLE; + + /* modify the command trb to NO OP command */ + cmd_trb->generic.field[0] = 0; + cmd_trb->generic.field[1] = 0; + cmd_trb->generic.field[2] = 0; + cmd_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + break; + } + } +} + +static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci) +{ + struct xhci_cd *cur_cd, *next_cd; + + if (list_empty(&xhci->cancel_cmd_list)) + return; + + list_for_each_entry_safe(cur_cd, next_cd, + &xhci->cancel_cmd_list, cancel_cmd_list) { + xhci_cmd_to_noop(xhci, cur_cd); + list_del(&cur_cd->cancel_cmd_list); + kfree(cur_cd); + } +} + +/* + * traversing the cancel_cmd_list. If the command descriptor according + * to cmd_trb is found, the function free it and return 1, otherwise + * return 0. + */ +static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci, + union xhci_trb *cmd_trb) +{ + struct xhci_cd *cur_cd, *next_cd; + + if (list_empty(&xhci->cancel_cmd_list)) + return 0; + + list_for_each_entry_safe(cur_cd, next_cd, + &xhci->cancel_cmd_list, cancel_cmd_list) { + if (cur_cd->cmd_trb == cmd_trb) { + if (cur_cd->command) + xhci_complete_cmd_in_cmd_wait_list(xhci, + cur_cd->command, COMP_CMD_STOP); + list_del(&cur_cd->cancel_cmd_list); + kfree(cur_cd); + return 1; + } + } + + return 0; +} + +/* + * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the + * trb pointed by the command ring dequeue pointer is the trb we want to + * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will + * traverse the cancel_cmd_list to trun the all of the commands according + * to command descriptor to NO-OP trb. + */ +static int handle_stopped_cmd_ring(struct xhci_hcd *xhci, + int cmd_trb_comp_code) +{ + int cur_trb_is_good = 0; + + /* Searching the cmd trb pointed by the command ring dequeue + * pointer in command descriptor list. If it is found, free it. + */ + cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci, + xhci->cmd_ring->dequeue); + + if (cmd_trb_comp_code == COMP_CMD_ABORT) + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + else if (cmd_trb_comp_code == COMP_CMD_STOP) { + /* traversing the cancel_cmd_list and canceling + * the command according to command descriptor + */ + xhci_cancel_cmd_in_cd_list(xhci); + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + /* + * ring command ring doorbell again to restart the + * command ring + */ + if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) + xhci_ring_cmd_db(xhci); + } + return cur_trb_is_good; +} + static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { @@ -1103,6 +1365,22 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci->error_bitmask |= 1 << 5; return; } + + if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) || + (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) { + /* If the return value is 0, we think the trb pointed by + * command ring dequeue pointer is a good trb. The good + * trb means we don't want to cancel the trb, but it have + * been stopped by host. So we should handle it normally. + * Otherwise, driver should invoke inc_deq() and return. + */ + if (handle_stopped_cmd_ring(xhci, + GET_COMP_CODE(le32_to_cpu(event->status)))) { + inc_deq(xhci, xhci->cmd_ring); + return; + } + } + switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]) & TRB_TYPE_BITMASK) { case TRB_TYPE(TRB_ENABLE_SLOT): @@ -1995,6 +2273,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, */ static int handle_tx_event(struct xhci_hcd *xhci, struct xhci_transfer_event *event) + __releases(&xhci->lock) + __acquires(&xhci->lock) { struct xhci_virt_device *xdev; struct xhci_virt_ep *ep; @@ -2073,8 +2353,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (xhci->quirks & XHCI_TRUST_TX_LENGTH) trb_comp_code = COMP_SHORT_TX; else - xhci_warn(xhci, "WARN Successful completion on short TX: " - "needs XHCI_TRUST_TX_LENGTH quirk?\n"); + xhci_warn_ratelimited(xhci, + "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: @@ -2572,7 +2852,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, xhci_err(xhci, "Ring expansion failed\n"); return -ENOMEM; } - }; + } if (enqueue_is_link_trb(ep_ring)) { struct xhci_ring *ring = ep_ring; @@ -3392,7 +3672,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } else { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; - if (xhci->hci_version == 0x100) { + if (xhci->hci_version == 0x100 && + !(xhci->quirks & + XHCI_AVOID_BEI)) { /* Set BEI bit except for the last td */ if (i < num_tds - 1) field |= TRB_BEI; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7648b2d4b268..8d7fcbbe6ade 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/slab.h> +#include <linux/dmi.h> #include "xhci.h" @@ -51,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). */ -static int handshake(struct xhci_hcd *xhci, void __iomem *ptr, +int handshake(struct xhci_hcd *xhci, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; @@ -104,9 +105,10 @@ int xhci_halt(struct xhci_hcd *xhci) ret = handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); - if (!ret) + if (!ret) { xhci->xhc_state |= XHCI_STATE_HALTED; - else + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + } else xhci_warn(xhci, "Host not halted after %u microseconds.\n", XHCI_MAX_HALT_USEC); return ret; @@ -166,7 +168,7 @@ int xhci_reset(struct xhci_hcd *xhci) xhci_writel(xhci, command, &xhci->op_regs->command); ret = handshake(xhci, &xhci->op_regs->command, - CMD_RESET, 0, 250 * 1000); + CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -175,7 +177,8 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { xhci->bus_state[i].port_c_suspend = 0; @@ -397,6 +400,97 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) #endif +static void compliance_mode_recovery(unsigned long arg) +{ + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + u32 temp; + int i; + + xhci = (struct xhci_hcd *)arg; + + for (i = 0; i < xhci->num_usb3_ports; i++) { + temp = xhci_readl(xhci, xhci->usb3_ports[i]); + if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { + /* + * Compliance Mode Detected. Letting USB Core + * handle the Warm Reset + */ + xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + i + 1); + xhci_dbg(xhci, "Attempting Recovery routine!\n"); + hcd = xhci->shared_hcd; + + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + + usb_hcd_poll_rh_status(hcd); + } + } + + if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) + mod_timer(&xhci->comp_mode_recovery_timer, + jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); +} + +/* + * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver + * that causes ports behind that hardware to enter compliance mode sometimes. + * The quirk creates a timer that polls every 2 seconds the link state of + * each host controller's port and recovers it by issuing a Warm reset + * if Compliance mode is detected, otherwise the port will become "dead" (no + * device connections or disconnections will be detected anymore). Becasue no + * status event is generated when entering compliance mode (per xhci spec), + * this quirk is needed on systems that have the failing hardware installed. + */ +static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) +{ + xhci->port_status_u0 = 0; + init_timer(&xhci->comp_mode_recovery_timer); + + xhci->comp_mode_recovery_timer.data = (unsigned long) xhci; + xhci->comp_mode_recovery_timer.function = compliance_mode_recovery; + xhci->comp_mode_recovery_timer.expires = jiffies + + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS); + + set_timer_slack(&xhci->comp_mode_recovery_timer, + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); + add_timer(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); +} + +/* + * This function identifies the systems that have installed the SN65LVPE502CP + * USB3.0 re-driver and that need the Compliance Mode Quirk. + * Systems: + * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 + */ +static bool compliance_mode_recovery_timer_quirk_check(void) +{ + const char *dmi_product_name, *dmi_sys_vendor; + + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) + return false; + + if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) + return false; + + if (strstr(dmi_product_name, "Z420") || + strstr(dmi_product_name, "Z620") || + strstr(dmi_product_name, "Z820")) + return true; + + return false; +} + +static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) +{ + return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); +} + + /* * Initialize memory for HCD and xHC (one-time init). * @@ -420,6 +514,12 @@ int xhci_init(struct usb_hcd *hcd) retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg(xhci, "Finished xhci_init\n"); + /* Initializing Compliance Mode Recovery Data If Needed */ + if (compliance_mode_recovery_timer_quirk_check()) { + xhci->quirks |= XHCI_COMP_MODE_QUIRK; + compliance_mode_recovery_timer_init(xhci); + } + return retval; } @@ -484,6 +584,7 @@ static int xhci_run_finished(struct xhci_hcd *xhci) return -ENODEV; } xhci->shared_hcd->state = HC_STATE_RUNNING; + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; if (xhci->quirks & XHCI_NEC_HOST) xhci_ring_cmd_db(xhci); @@ -628,6 +729,11 @@ void xhci_stop(struct usb_hcd *hcd) del_timer_sync(&xhci->event_ring_timer); #endif + /* Deleting Compliance Mode Recovery Timer */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) + del_timer_sync(&xhci->comp_mode_recovery_timer); + if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -658,6 +764,9 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (xhci->quirks & XHCI_SPURIOUS_REBOOT) + usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); spin_unlock_irq(&xhci->lock); @@ -781,7 +890,7 @@ int xhci_suspend(struct xhci_hcd *xhci) command &= ~CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); if (handshake(xhci, &xhci->op_regs->status, - STS_HALT, STS_HALT, 100*100)) { + STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -802,6 +911,16 @@ int xhci_suspend(struct xhci_hcd *xhci) } spin_unlock_irq(&xhci->lock); + /* + * Deleting Compliance Mode Recovery Timer because the xHCI Host + * is about to be suspended. + */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + } + /* step 5: remove core well power */ /* synchronize irq when using MSI-X */ xhci_msix_sync_irqs(xhci); @@ -934,6 +1053,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); } + + /* + * If system is subject to the Quirk, Compliance Mode Timer needs to + * be re-initialized Always after a system resume. Ports are subject + * to suffer the Compliance Mode issue again. It doesn't matter if + * ports have entered previously to U0 before system's suspension. + */ + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + compliance_mode_recovery_timer_init(xhci); + return retval; } #endif /* CONFIG_PM */ @@ -1823,7 +1952,7 @@ static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, xhci->num_active_eps); } -unsigned int xhci_get_block_size(struct usb_device *udev) +static unsigned int xhci_get_block_size(struct usb_device *udev) { switch (udev->speed) { case USB_SPEED_LOW: @@ -1841,7 +1970,8 @@ unsigned int xhci_get_block_size(struct usb_device *udev) } } -unsigned int xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) +static unsigned int +xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) { if (interval_bw->overhead[LS_OVERHEAD_TYPE]) return LS_OVERHEAD; @@ -2396,6 +2526,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, struct completion *cmd_completion; u32 *cmd_status; struct xhci_virt_device *virt_dev; + union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; @@ -2441,6 +2572,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } init_completion(cmd_completion); + cmd_trb = xhci->cmd_ring->dequeue; if (!ctx_change) ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, udev->slot_id, must_succeed); @@ -2462,14 +2594,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, /* Wait for the configure endpoint command to complete */ timeleft = wait_for_completion_interruptible_timeout( cmd_completion, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for %s command\n", timeleft == 0 ? "Timeout" : "Signal", ctx_change == 0 ? "configure endpoint" : "evaluate context"); - /* FIXME cancel the configure endpoint command */ + /* cancel the configure endpoint command */ + ret = xhci_cancel_cmd(xhci, command, cmd_trb); + if (ret < 0) + return ret; return -ETIME; } @@ -3418,8 +3553,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; int timeleft; int ret; + union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); + cmd_trb = xhci->cmd_ring->dequeue; ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); @@ -3431,12 +3568,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) /* XXX: how much time for xHC slot assignment? */ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for a slot\n", timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the enable slot request */ - return 0; + /* cancel the enable slot request */ + return xhci_cancel_cmd(xhci, NULL, cmd_trb); } if (!xhci->slot_id) { @@ -3497,6 +3634,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; + union xhci_trb *cmd_trb; if (!udev->slot_id) { xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id); @@ -3535,6 +3673,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); spin_lock_irqsave(&xhci->lock, flags); + cmd_trb = xhci->cmd_ring->dequeue; ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, udev->slot_id); if (ret) { @@ -3547,7 +3686,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); /* FIXME: From section 4.3.4: "Software shall be responsible for timing * the SetAddress() "recovery interval" required by USB and aborting the * command on a timeout. @@ -3555,7 +3694,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for address device command\n", timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the address device command */ + /* cancel the address device command */ + ret = xhci_cancel_cmd(xhci, NULL, cmd_trb); + if (ret < 0) + return ret; return -ETIME; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 55c0785810c9..53df4e70ca07 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1256,6 +1256,16 @@ struct xhci_td { union xhci_trb *last_trb; }; +/* xHCI command default timeout value */ +#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ) + +/* command descriptor */ +struct xhci_cd { + struct list_head cancel_cmd_list; + struct xhci_command *command; + union xhci_trb *cmd_trb; +}; + struct xhci_dequeue_state { struct xhci_segment *new_deq_seg; union xhci_trb *new_deq_ptr; @@ -1421,6 +1431,11 @@ struct xhci_hcd { /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; + unsigned int cmd_ring_state; +#define CMD_RING_STATE_RUNNING (1 << 0) +#define CMD_RING_STATE_ABORTED (1 << 1) +#define CMD_RING_STATE_STOPPED (1 << 2) + struct list_head cancel_cmd_list; unsigned int cmd_ring_reserved_trbs; struct xhci_ring *event_ring; struct xhci_erst erst; @@ -1494,6 +1509,9 @@ struct xhci_hcd { #define XHCI_TRUST_TX_LENGTH (1 << 10) #define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_INTEL_HOST (1 << 12) +#define XHCI_SPURIOUS_REBOOT (1 << 13) +#define XHCI_COMP_MODE_QUIRK (1 << 14) +#define XHCI_AVOID_BEI (1 << 15) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1510,6 +1528,11 @@ struct xhci_hcd { unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; +/* Compliance Mode Timer Triggered every 2 seconds */ +#define COMP_MODE_RCVRY_MSECS 2000 }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ @@ -1537,6 +1560,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) #define xhci_warn(xhci, fmt, args...) \ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +#define xhci_warn_ratelimited(xhci, fmt, args...) \ + dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) /* TODO: copied from ehci.h - can be refactored? */ /* xHCI spec says all registers are little endian */ @@ -1695,6 +1720,8 @@ static inline void xhci_unregister_plat(void) /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); +int handshake(struct xhci_hcd *xhci, void __iomem *ptr, + u32 mask, u32 done, int usec); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_reset(struct xhci_hcd *xhci); @@ -1785,6 +1812,8 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); +int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, + union xhci_trb *cmd_trb); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 1bfcd02ebeb5..a8f05239350e 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -244,3 +244,8 @@ config USB_YUREX To compile this driver as a module, choose M here: the module will be called yurex. +config USB_EZUSB_FX2 + tristate "Functions for loading firmware on EZUSB chips" + help + Say Y here if you need EZUSB device support. + (Cypress FX/FX2/FX2LP microcontrollers) diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 796ce7ebccc8..3e99a643294b 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_CYPRESS_CY7C63) += cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o +obj-$(CONFIG_USB_EZUSB_FX2) += ezusb.o obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index ff08015b230c..ae794b90766b 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -232,7 +232,7 @@ wraperr: return err; } -static const struct usb_device_id id_table[] __devinitconst = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c new file mode 100644 index 000000000000..4223d761223d --- /dev/null +++ b/drivers/usb/misc/ezusb.c @@ -0,0 +1,160 @@ +/* + * EZ-USB specific functions used by some of the USB to Serial drivers. + * + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/ihex.h> + +struct ezusb_fx_type { + /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ + unsigned short cpucs_reg; + unsigned short max_internal_adress; +}; + +struct ezusb_fx_type ezusb_fx1 = { + .cpucs_reg = 0x7F92, + .max_internal_adress = 0x1B3F, +}; + +struct ezusb_fx_type ezusb_fx2 = { + .cpucs_reg = 0xE600, + .max_internal_adress = 0x3FFF, +}; + +/* Commands for writing to memory */ +#define WRITE_INT_RAM 0xA0 +#define WRITE_EXT_RAM 0xA3 + +int ezusb_writememory(struct usb_device *dev, int address, + unsigned char *data, int length, __u8 request) +{ + int result; + unsigned char *transfer_buffer; + + if (!dev) + return -ENODEV; + + transfer_buffer = kmemdup(data, length, GFP_KERNEL); + if (!transfer_buffer) { + dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, length); + return -ENOMEM; + } + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + address, 0, transfer_buffer, length, 3000); + + kfree(transfer_buffer); + return result; +} +EXPORT_SYMBOL_GPL(ezusb_writememory); + +int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, + unsigned char reset_bit) +{ + int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); + if (response < 0) + dev_err(&dev->dev, "%s-%d failed: %d\n", + __func__, reset_bit, response); + return response; +} + +int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); + +int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); + +static int ezusb_ihex_firmware_download(struct usb_device *dev, + struct ezusb_fx_type fx, + const char *firmware_path) +{ + int ret = -ENOENT; + const struct firmware *firmware = NULL; + const struct ihex_binrec *record; + + if (request_ihex_firmware(&firmware, firmware_path, + &dev->dev)) { + dev_err(&dev->dev, + "%s - request \"%s\" failed\n", + __func__, firmware_path); + goto out; + } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); + if (ret < 0) + goto out; + + record = (const struct ihex_binrec *)firmware->data; + for (; record; record = ihex_next_binrec(record)) { + if (be32_to_cpu(record->addr) > fx.max_internal_adress) { + ret = ezusb_writememory(dev, be32_to_cpu(record->addr), + (unsigned char *)record->data, + be16_to_cpu(record->len), WRITE_EXT_RAM); + if (ret < 0) { + dev_err(&dev->dev, "%s - ezusb_writememory " + "failed writing internal memory " + "(%d %04X %p %d)\n", __func__, ret, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); + goto out; + } + } + } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 1); + if (ret < 0) + goto out; + record = (const struct ihex_binrec *)firmware->data; + for (; record; record = ihex_next_binrec(record)) { + if (be32_to_cpu(record->addr) <= fx.max_internal_adress) { + ret = ezusb_writememory(dev, be32_to_cpu(record->addr), + (unsigned char *)record->data, + be16_to_cpu(record->len), WRITE_INT_RAM); + if (ret < 0) { + dev_err(&dev->dev, "%s - ezusb_writememory " + "failed writing external memory " + "(%d %04X %p %d)\n", __func__, ret, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); + goto out; + } + } + } + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); +out: + release_firmware(firmware); + return ret; +} + +int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path) +{ + return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path); +} +EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); + +int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path) +{ + return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); + diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index a2702cbfe804..80894791c020 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -868,9 +868,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dbg(2, "%s: enter", __func__); - if (udev == NULL) - dev_info(&interface->dev, "udev is NULL.\n"); - /* allocate memory for our device state and initialize it */ dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 1084124c4a44..b9b356a9dd11 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -338,7 +338,7 @@ write_rio(struct file *file, const char __user *buffer, thistime -= partial; } else break; - }; + } if (result) { dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", result); diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index ef0c3f9f0947..23a0b7f0892d 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,11 +8,10 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX) + select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS - select USB_GADGET_DUALSPEED help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -20,7 +19,7 @@ config USB_MUSB_HDRC it's being used with, including the USB peripheral role, or the USB host role, or both. - Texas Instruments familiies using this IP include DaVinci + Texas Instruments families using this IP include DaVinci (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. Analog Devices parts using this IP include Blackfin BF54x, @@ -57,7 +56,7 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX + depends on SOC_TI81XX || SOC_AM33XX config USB_MUSB_BLACKFIN tristate "Blackfin" diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 7a95ab87ac00..457f25e62c51 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include <plat/usb.h> @@ -107,9 +108,8 @@ static void am35x_musb_enable(struct musb *musb) musb_writel(reg_base, CORE_INTR_MASK_SET_REG, AM35X_INTR_USB_MASK); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - musb_writel(reg_base, CORE_INTR_SRC_SET_REG, - AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); + musb_writel(reg_base, CORE_INTR_SRC_SET_REG, + AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT); } /* @@ -173,9 +173,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - devctl = musb_readb(mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); @@ -192,9 +189,6 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) { static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -271,8 +265,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -289,7 +282,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -326,7 +319,7 @@ eoi: } /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -369,8 +362,7 @@ static int am35x_musb_init(struct musb *musb) if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); /* Reset the musb */ if (data->reset) @@ -400,8 +392,7 @@ static int am35x_musb_exit(struct musb *musb) struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); /* Shutdown the on-chip PHY and its PLL. */ if (data->set_phy_power) @@ -468,6 +459,7 @@ static int __devinit am35x_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -475,38 +467,47 @@ static int __devinit am35x_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } phy_clk = clk_get(&pdev->dev, "fck"); if (IS_ERR(phy_clk)) { dev_err(&pdev->dev, "failed to get PHY clock\n"); ret = PTR_ERR(phy_clk); - goto err2; + goto err3; } clk = clk_get(&pdev->dev, "ick"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err3; + goto err4; } ret = clk_enable(phy_clk); if (ret) { dev_err(&pdev->dev, "failed to enable PHY clock\n"); - goto err4; + goto err5; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err5; + goto err6; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &am35x_dmamask; musb->dev.coherent_dma_mask = am35x_dmamask; @@ -524,38 +525,41 @@ static int __devinit am35x_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err6; + goto err7; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err6; + goto err7; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err6; + goto err7; } return 0; -err6: +err7: clk_disable(clk); -err5: +err6: clk_disable(phy_clk); -err4: +err5: clk_put(clk); -err3: +err4: clk_put(phy_clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -567,6 +571,7 @@ static int __devexit am35x_remove(struct platform_device *pdev) { struct am35x_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 428e6aa3e78a..e8cff9bb9d23 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/prefetch.h> +#include <linux/usb/nop-usb-xceiv.h> #include <asm/cacheflush.h> @@ -184,8 +185,8 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) } /* Start sampling ID pin, when plug is removed from MUSB */ - if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE - || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) || + if ((musb->xceiv->state == OTG_STATE_B_IDLE + || musb->xceiv->state == OTG_STATE_A_WAIT_BCON) || (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); musb->a_wait_bcon = TIMER_DELAY; @@ -228,18 +229,13 @@ static void musb_conn_timer_handler(unsigned long _musb) val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR; musb_writeb(musb->mregs, MUSB_INTRUSB, val); - if (is_otg_enabled(musb)) - musb->xceiv->state = OTG_STATE_B_IDLE; - else - musb_writeb(musb->mregs, MUSB_POWER, MUSB_POWER_HSENAB); + musb->xceiv->state = OTG_STATE_B_IDLE; } mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); break; case OTG_STATE_B_IDLE: - - if (!is_peripheral_enabled(musb)) - break; - /* Start a new session. It seems that MUSB needs taking + /* + * Start a new session. It seems that MUSB needs taking * some time to recognize the type of the plug inserted? */ val = musb_readw(musb->mregs, MUSB_DEVCTL); @@ -295,10 +291,7 @@ static void musb_conn_timer_handler(unsigned long _musb) static void bfin_musb_enable(struct musb *musb) { - if (!is_otg_enabled(musb) && is_host_enabled(musb)) { - mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); - musb->a_wait_bcon = TIMER_DELAY; - } + /* REVISIT is this really correct ? */ } static void bfin_musb_disable(struct musb *musb) @@ -323,12 +316,6 @@ static int bfin_musb_set_power(struct usb_phy *x, unsigned mA) return 0; } -static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); -} - static int bfin_musb_vbus_status(struct musb *musb) { return 0; @@ -424,12 +411,10 @@ static int bfin_musb_init(struct musb *musb) bfin_musb_reg_init(musb); - if (is_host_enabled(musb)) { - setup_timer(&musb_conn_timer, - musb_conn_timer_handler, (unsigned long) musb); - } - if (is_peripheral_enabled(musb)) - musb->xceiv->set_power = bfin_musb_set_power; + setup_timer(&musb_conn_timer, musb_conn_timer_handler, + (unsigned long) musb); + + musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; musb->double_buffer_not_ok = true; @@ -454,7 +439,6 @@ static const struct musb_platform_ops bfin_ops = { .disable = bfin_musb_disable, .set_mode = bfin_musb_set_mode, - .try_idle = bfin_musb_try_idle, .vbus_status = bfin_musb_vbus_status, .set_vbus = bfin_musb_set_vbus, @@ -471,6 +455,7 @@ static int __devinit bfin_probe(struct platform_device *pdev) struct bfin_glue *glue; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -478,12 +463,21 @@ static int __devinit bfin_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &bfin_dmamask; musb->dev.coherent_dma_mask = bfin_dmamask; @@ -499,26 +493,29 @@ static int __devinit bfin_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; + goto err3; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; + goto err3; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; + goto err3; } return 0; -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -530,6 +527,7 @@ static int __devexit bfin_remove(struct platform_device *pdev) { struct bfin_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); kfree(glue); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 8637c1f69fc3..e19da82b4782 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1316,7 +1316,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) } /* Instantiate a software object representing a DMA controller. */ -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *mregs) { struct cppi *controller; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0f9fcec4e1d3..8bc44b76eec2 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -33,9 +33,10 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include <mach/da8xx.h> -#include <mach/usb.h> +#include <linux/platform_data/usb-davinci.h> #include "musb_core.h" @@ -155,9 +156,8 @@ static void da8xx_musb_enable(struct musb *musb) musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG, - DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT); + musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG, + DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT); } /** @@ -231,9 +231,6 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - /* * There's no ID-changed IRQ, so we have no good way to tell * when to switch to the A-Default state machine (by setting @@ -263,9 +260,6 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) { static unsigned long last_timer; - if (!is_otg_enabled(musb)) - return; - if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -333,8 +327,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & USB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -351,7 +344,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -382,7 +375,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0); /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -430,8 +423,7 @@ static int da8xx_musb_init(struct musb *musb) if (IS_ERR_OR_NULL(musb->xceiv)) goto fail; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); /* Reset the controller */ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK); @@ -454,8 +446,7 @@ fail: static int da8xx_musb_exit(struct musb *musb) { - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); phy_off(); @@ -489,6 +480,7 @@ static int __devinit da8xx_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -496,25 +488,34 @@ static int __devinit da8xx_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } clk = clk_get(&pdev->dev, "usb20"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err2; + goto err3; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; + goto err4; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &da8xx_dmamask; musb->dev.coherent_dma_mask = da8xx_dmamask; @@ -531,32 +532,35 @@ static int __devinit da8xx_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err5; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err5; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err5; } return 0; -err4: +err5: clk_disable(clk); -err3: +err4: clk_put(clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -568,6 +572,7 @@ static int __devexit da8xx_remove(struct platform_device *pdev) { struct da8xx_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 472c8b42d38b..606bfd00cde6 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -33,6 +33,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include <mach/cputype.h> #include <mach/hardware.h> @@ -115,8 +116,7 @@ static void davinci_musb_enable(struct musb *musb) dma_off = 0; /* force a DRVVBUS irq so we can start polling for ID change */ - if (is_otg_enabled(musb)) - musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, + musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT); } @@ -234,10 +234,8 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - - /* There's no ID-changed IRQ, so we have no good way to tell + /* + * There's no ID-changed IRQ, so we have no good way to tell * when to switch to the A-Default state machine (by setting * the DEVCTL.SESSION flag). * @@ -315,8 +313,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) u8 devctl = musb_readb(mregs, MUSB_DEVCTL); int err = musb->int_usb & MUSB_INTR_VBUSERROR; - err = is_host_enabled(musb) - && (musb->int_usb & MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* The Mentor core doesn't debounce VBUS as needed * to cope with device connect current spikes. This @@ -332,7 +329,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; @@ -365,8 +362,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb_writel(tibase, DAVINCI_USB_EOI_REG, 0); /* poll for ID change */ - if (is_otg_enabled(musb) - && musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -397,8 +393,7 @@ static int davinci_musb_init(struct musb *musb) if (revision == 0) goto fail; - if (is_host_enabled(musb)) - setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); davinci_musb_source_power(musb, 0, 1); @@ -419,12 +414,7 @@ static int davinci_musb_init(struct musb *musb) if (cpu_is_davinci_dm355()) { u32 deepsleep = __raw_readl(DM355_DEEPSLEEP); - if (is_host_enabled(musb)) { - deepsleep &= ~DRVVBUS_OVERRIDE; - } else { - deepsleep &= ~DRVVBUS_FORCE; - deepsleep |= DRVVBUS_OVERRIDE; - } + deepsleep &= ~DRVVBUS_FORCE; __raw_writel(deepsleep, DM355_DEEPSLEEP); } @@ -453,8 +443,7 @@ unregister: static int davinci_musb_exit(struct musb *musb) { - if (is_host_enabled(musb)) - del_timer_sync(&otg_workaround); + del_timer_sync(&otg_workaround); /* force VBUS off */ if (cpu_is_davinci_dm355()) { @@ -468,7 +457,7 @@ static int davinci_musb_exit(struct musb *musb) davinci_musb_source_power(musb, 0 /*off*/, 1); /* delay, to avoid problems with module reload */ - if (is_host_enabled(musb) && musb->xceiv->otg->default_a) { + if (musb->xceiv->otg->default_a) { int maxdelay = 30; u8 devctl, warn = 0; @@ -523,6 +512,7 @@ static int __devinit davinci_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -530,25 +520,34 @@ static int __devinit davinci_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } clk = clk_get(&pdev->dev, "usb"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err2; + goto err3; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; + goto err4; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &davinci_dmamask; musb->dev.coherent_dma_mask = davinci_dmamask; @@ -565,32 +564,35 @@ static int __devinit davinci_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err5; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err5; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err5; } return 0; -err4: +err5: clk_disable(clk); -err3: +err4: clk_put(clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -602,6 +604,7 @@ static int __devexit davinci_remove(struct platform_device *pdev) { struct davinci_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 26f1befb4896..bb56a0e8b23b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -99,6 +99,8 @@ #include <linux/prefetch.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/idr.h> +#include <linux/dma-mapping.h> #include "musb_core.h" @@ -114,6 +116,7 @@ #define MUSB_DRIVER_NAME "musb-hdrc" const char musb_driver_name[] = MUSB_DRIVER_NAME; +static DEFINE_IDA(musb_ida); MODULE_DESCRIPTION(DRIVER_INFO); MODULE_AUTHOR(DRIVER_AUTHOR); @@ -130,6 +133,35 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ +int musb_get_id(struct device *dev, gfp_t gfp_mask) +{ + int ret; + int id; + + ret = ida_pre_get(&musb_ida, gfp_mask); + if (!ret) { + dev_err(dev, "failed to reserve resource for id\n"); + return -ENOMEM; + } + + ret = ida_get_new(&musb_ida, &id); + if (ret < 0) { + dev_err(dev, "failed to allocate a new id\n"); + return ret; + } + + return id; +} +EXPORT_SYMBOL_GPL(musb_get_id); + +void musb_put_id(struct device *dev, int id) +{ + + dev_dbg(dev, "removing id %d\n", id); + ida_remove(&musb_ida, id); +} +EXPORT_SYMBOL_GPL(musb_put_id); + #ifndef CONFIG_BLACKFIN static int musb_ulpi_read(struct usb_phy *phy, u32 offset) { @@ -234,6 +266,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; + if (unlikely(len == 0)) + return; + prefetch((u8 *)src); dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", @@ -276,6 +311,9 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; + if (unlikely(len == 0)) + return; + dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", 'R', hw_ep->epnum, fifo, len, dst); @@ -348,7 +386,7 @@ void musb_load_testpacket(struct musb *musb) /* * Handles OTG hnp timeouts, such as b_ase0_brst */ -void musb_otg_timer_func(unsigned long data) +static void musb_otg_timer_func(unsigned long data) { struct musb *musb = (struct musb *)data; unsigned long flags; @@ -643,8 +681,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_B_PERIPHERAL: musb_g_suspend(musb); - musb->is_active = is_otg_enabled(musb) - && otg->gadget->b_hnp_enable; + musb->is_active = otg->gadget->b_hnp_enable; if (musb->is_active) { musb->xceiv->state = OTG_STATE_B_WAIT_ACON; dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); @@ -660,8 +697,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; break; case OTG_STATE_B_HOST: /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ @@ -749,7 +785,7 @@ b_host: case OTG_STATE_A_SUSPEND: usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + if (musb->a_wait_bcon != 0) musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(musb->a_wait_bcon)); break; @@ -787,7 +823,7 @@ b_host: */ if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; - if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) { + if ((devctl & MUSB_DEVCTL_HM) != 0) { /* * Looks like non-HS BABBLE can be ignored, but * HS BABBLE is an error condition. For HS the solution @@ -801,7 +837,7 @@ b_host: ERR("Stopping host session -- babble\n"); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); } - } else if (is_peripheral_capable()) { + } else { dev_dbg(musb->controller, "BUS RESET as %s\n", otg_state_string(musb->xceiv->state)); switch (musb->xceiv->state) { @@ -925,25 +961,16 @@ void musb_start(struct musb *musb) devctl = musb_readb(regs, MUSB_DEVCTL); devctl &= ~MUSB_DEVCTL_SESSION; - if (is_otg_enabled(musb)) { - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->is_active = 1; - else - devctl |= MUSB_DEVCTL_SESSION; - - } else if (is_host_enabled(musb)) { - /* assume ID pin is hard-wired to ground */ + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) + musb->is_active = 1; + else devctl |= MUSB_DEVCTL_SESSION; - } else /* peripheral is enabled */ { - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->is_active = 1; - } musb_platform_enable(musb); musb_writeb(regs, MUSB_DEVCTL, devctl); } @@ -1007,8 +1034,6 @@ static void musb_shutdown(struct platform_device *pdev) musb_generic_disable(musb); spin_unlock_irqrestore(&musb->lock, flags); - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - usb_remove_hcd(musb_to_hcd(musb)); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); @@ -1302,7 +1327,7 @@ done: if (offset < 0) { pr_debug("%s: mem overrun, ep %d\n", musb_driver_name, epn); - return -EINVAL; + return offset; } epn++; musb->nr_endpoints = max(epn, musb->nr_endpoints); @@ -1330,7 +1355,7 @@ static int __devinit ep_config_from_hw(struct musb *musb) { u8 epnum = 0; struct musb_hw_ep *hw_ep; - void *mbase = musb->mregs; + void __iomem *mbase = musb->mregs; int ret = 0; dev_dbg(musb->controller, "<== static silicon ep config\n"); @@ -1571,13 +1596,10 @@ irqreturn_t musb_interrupt(struct musb *musb) /* musb_ep_select(musb->mregs, ep_num); */ /* REVISIT just retval = ep->rx_irq(...) */ retval = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_rx(musb, ep_num); - } else { - if (is_peripheral_capable()) - musb_g_rx(musb, ep_num); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_rx(musb, ep_num); + else + musb_g_rx(musb, ep_num); } reg >>= 1; @@ -1592,13 +1614,10 @@ irqreturn_t musb_interrupt(struct musb *musb) /* musb_ep_select(musb->mregs, ep_num); */ /* REVISIT just retval |= ep->tx_irq(...) */ retval = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_tx(musb, ep_num); - } else { - if (is_peripheral_capable()) - musb_g_tx(musb, ep_num); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_tx(musb, ep_num); + else + musb_g_tx(musb, ep_num); } reg >>= 1; ep_num++; @@ -1634,22 +1653,16 @@ void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) } else { /* endpoints 1..15 */ if (transmit) { - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_tx(musb, epnum); - } else { - if (is_peripheral_capable()) - musb_g_tx(musb, epnum); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_tx(musb, epnum); + else + musb_g_tx(musb, epnum); } else { /* receive */ - if (devctl & MUSB_DEVCTL_HM) { - if (is_host_capable()) - musb_host_rx(musb, epnum); - } else { - if (is_peripheral_capable()) - musb_g_rx(musb, epnum); - } + if (devctl & MUSB_DEVCTL_HM) + musb_host_rx(musb, epnum); + else + musb_g_rx(musb, epnum); } } } @@ -1785,10 +1798,9 @@ static const struct attribute_group musb_attr_group = { static void musb_irq_work(struct work_struct *data) { struct musb *musb = container_of(data, struct musb, irq_work); - static int old_state; - if (musb->xceiv->state != old_state) { - old_state = musb->xceiv->state; + if (musb->xceiv->state != musb->xceiv_old_state) { + musb->xceiv_old_state = musb->xceiv->state; sysfs_notify(&musb->controller->kobj, NULL, "mode"); } } @@ -1862,15 +1874,15 @@ static void musb_free(struct musb *musb) dma_controller_destroy(c); } - kfree(musb); + usb_put_hcd(musb_to_hcd(musb)); } /* * Perform generic per-controller initialization. * - * @pDevice: the controller (already clocked, etc) - * @nIrq: irq - * @mregs: virtual address of controller registers, + * @dev: the controller (already clocked, etc) + * @nIrq: IRQ number + * @ctrl: virtual address of controller registers, * not yet corrected for platform-specific offsets */ static int __devinit @@ -1879,6 +1891,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) int status; struct musb *musb; struct musb_hdrc_platform_data *plat = dev->platform_data; + struct usb_hcd *hcd; /* The driver might handle more features than the board; OK. * Fail when the board needs a feature that's not enabled. @@ -1901,7 +1914,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_enable(musb->controller); spin_lock_init(&musb->lock); - musb->board_mode = plat->mode; musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops; @@ -1972,7 +1984,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail3; } musb->nIrq = nIrq; -/* FIXME this handles wakeup irqs wrong */ + /* FIXME this handles wakeup irqs wrong */ if (enable_irq_wake(nIrq) == 0) { musb->irq_wake = 1; device_init_wakeup(dev, 1); @@ -1981,58 +1993,25 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) } /* host side needs more setup */ - if (is_host_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - otg_set_host(musb->xceiv->otg, &hcd->self); - - if (is_otg_enabled(musb)) - hcd->self.otg_port = 1; - musb->xceiv->otg->host = &hcd->self; - hcd->power_budget = 2 * (plat->power ? : 250); - - /* program PHY to use external vBus if required */ - if (plat->extvbus) { - u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); - busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_write_ulpi_buscontrol(musb->mregs, busctl); - } + hcd = musb_to_hcd(musb); + otg_set_host(musb->xceiv->otg, &hcd->self); + hcd->self.otg_port = 1; + musb->xceiv->otg->host = &hcd->self; + hcd->power_budget = 2 * (plat->power ? : 250); + + /* program PHY to use external vBus if required */ + if (plat->extvbus) { + u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); + busctl |= MUSB_ULPI_USE_EXTVBUS; + musb_write_ulpi_buscontrol(musb->mregs, busctl); } - /* For the host-only role, we can activate right away. - * (We expect the ID pin to be forcibly grounded!!) - * Otherwise, wait till the gadget driver hooks up. - */ - if (!is_otg_enabled(musb) && is_host_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_IDLE; - - status = usb_add_hcd(musb_to_hcd(musb), 0, 0); - - hcd->self.uses_pio_for_control = 1; - dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n", - "HOST", status, - musb_readb(musb->mregs, MUSB_DEVCTL), - (musb_readb(musb->mregs, MUSB_DEVCTL) - & MUSB_DEVCTL_BDEVICE - ? 'B' : 'A')); - - } else /* peripheral is enabled */ { - MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; - - status = musb_gadget_setup(musb); + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; - dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n", - is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", - status, - musb_readb(musb->mregs, MUSB_DEVCTL)); + status = musb_gadget_setup(musb); - } if (status < 0) goto fail3; @@ -2048,28 +2027,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_put(musb->controller); - dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", - ({char *s; - switch (musb->board_mode) { - case MUSB_HOST: s = "Host"; break; - case MUSB_PERIPHERAL: s = "Peripheral"; break; - default: s = "OTG"; break; - }; s; }), - ctrl, - (is_dma_capable() && musb->dma_controller) - ? "DMA" : "PIO", - musb->nIrq); - return 0; fail5: musb_exit_debugfs(musb); fail4: - if (!is_otg_enabled(musb) && is_host_enabled(musb)) - usb_remove_hcd(musb_to_hcd(musb)); - else - musb_gadget_cleanup(musb); + musb_gadget_cleanup(musb); fail3: pm_runtime_put_sync(musb->controller); @@ -2096,11 +2060,6 @@ fail0: /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just * bridge to a platform device; this driver then suffices. */ - -#ifndef CONFIG_MUSB_PIO_ONLY -static u64 *orig_dma_mask; -#endif - static int __devinit musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -2119,10 +2078,6 @@ static int __devinit musb_probe(struct platform_device *pdev) return -ENOMEM; } -#ifndef CONFIG_MUSB_PIO_ONLY - /* clobbered by use_dma=n */ - orig_dma_mask = dev->dma_mask; -#endif status = musb_init_controller(dev, irq, base); if (status < 0) iounmap(base); @@ -2132,7 +2087,8 @@ static int __devinit musb_probe(struct platform_device *pdev) static int __devexit musb_remove(struct platform_device *pdev) { - struct musb *musb = dev_to_musb(&pdev->dev); + struct device *dev = &pdev->dev; + struct musb *musb = dev_to_musb(dev); void __iomem *ctrl_base = musb->ctrl_base; /* this gets called on rmmod. @@ -2145,9 +2101,9 @@ static int __devexit musb_remove(struct platform_device *pdev) musb_free(musb); iounmap(ctrl_base); - device_init_wakeup(&pdev->dev, 0); + device_init_wakeup(dev, 0); #ifndef CONFIG_MUSB_PIO_ONLY - pdev->dev.dma_mask = orig_dma_mask; + dma_set_mask(dev, *dev->parent->dma_mask); #endif return 0; } @@ -2160,11 +2116,9 @@ static void musb_save_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *epio; - if (is_host_enabled(musb)) { - musb->context.frame = musb_readw(musb_base, MUSB_FRAME); - musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); - musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); - } + musb->context.frame = musb_readw(musb_base, MUSB_FRAME); + musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); + musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); musb->context.power = musb_readb(musb_base, MUSB_POWER); musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); @@ -2203,30 +2157,29 @@ static void musb_save_context(struct musb *musb) musb->context.index_regs[i].rxfifosz = musb_read_rxfifosz(musb_base); } - if (is_host_enabled(musb)) { - musb->context.index_regs[i].txtype = - musb_readb(epio, MUSB_TXTYPE); - musb->context.index_regs[i].txinterval = - musb_readb(epio, MUSB_TXINTERVAL); - musb->context.index_regs[i].rxtype = - musb_readb(epio, MUSB_RXTYPE); - musb->context.index_regs[i].rxinterval = - musb_readb(epio, MUSB_RXINTERVAL); - - musb->context.index_regs[i].txfunaddr = - musb_read_txfunaddr(musb_base, i); - musb->context.index_regs[i].txhubaddr = - musb_read_txhubaddr(musb_base, i); - musb->context.index_regs[i].txhubport = - musb_read_txhubport(musb_base, i); - - musb->context.index_regs[i].rxfunaddr = - musb_read_rxfunaddr(musb_base, i); - musb->context.index_regs[i].rxhubaddr = - musb_read_rxhubaddr(musb_base, i); - musb->context.index_regs[i].rxhubport = - musb_read_rxhubport(musb_base, i); - } + + musb->context.index_regs[i].txtype = + musb_readb(epio, MUSB_TXTYPE); + musb->context.index_regs[i].txinterval = + musb_readb(epio, MUSB_TXINTERVAL); + musb->context.index_regs[i].rxtype = + musb_readb(epio, MUSB_RXTYPE); + musb->context.index_regs[i].rxinterval = + musb_readb(epio, MUSB_RXINTERVAL); + + musb->context.index_regs[i].txfunaddr = + musb_read_txfunaddr(musb_base, i); + musb->context.index_regs[i].txhubaddr = + musb_read_txhubaddr(musb_base, i); + musb->context.index_regs[i].txhubport = + musb_read_txhubport(musb_base, i); + + musb->context.index_regs[i].rxfunaddr = + musb_read_rxfunaddr(musb_base, i); + musb->context.index_regs[i].rxhubaddr = + musb_read_rxhubaddr(musb_base, i); + musb->context.index_regs[i].rxhubport = + musb_read_rxhubport(musb_base, i); } } @@ -2237,11 +2190,9 @@ static void musb_restore_context(struct musb *musb) void __iomem *ep_target_regs; void __iomem *epio; - if (is_host_enabled(musb)) { - musb_writew(musb_base, MUSB_FRAME, musb->context.frame); - musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); - musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); - } + musb_writew(musb_base, MUSB_FRAME, musb->context.frame); + musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); + musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); musb_writeb(musb_base, MUSB_POWER, musb->context.power); musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe); @@ -2280,33 +2231,31 @@ static void musb_restore_context(struct musb *musb) musb->context.index_regs[i].rxfifoadd); } - if (is_host_enabled(musb)) { - musb_writeb(epio, MUSB_TXTYPE, + musb_writeb(epio, MUSB_TXTYPE, musb->context.index_regs[i].txtype); - musb_writeb(epio, MUSB_TXINTERVAL, + musb_writeb(epio, MUSB_TXINTERVAL, musb->context.index_regs[i].txinterval); - musb_writeb(epio, MUSB_RXTYPE, + musb_writeb(epio, MUSB_RXTYPE, musb->context.index_regs[i].rxtype); - musb_writeb(epio, MUSB_RXINTERVAL, + musb_writeb(epio, MUSB_RXINTERVAL, - musb->context.index_regs[i].rxinterval); - musb_write_txfunaddr(musb_base, i, + musb->context.index_regs[i].rxinterval); + musb_write_txfunaddr(musb_base, i, musb->context.index_regs[i].txfunaddr); - musb_write_txhubaddr(musb_base, i, + musb_write_txhubaddr(musb_base, i, musb->context.index_regs[i].txhubaddr); - musb_write_txhubport(musb_base, i, + musb_write_txhubport(musb_base, i, musb->context.index_regs[i].txhubport); - ep_target_regs = - musb_read_target_reg_base(i, musb_base); + ep_target_regs = + musb_read_target_reg_base(i, musb_base); - musb_write_rxfunaddr(ep_target_regs, + musb_write_rxfunaddr(ep_target_regs, musb->context.index_regs[i].rxfunaddr); - musb_write_rxhubaddr(ep_target_regs, + musb_write_rxhubaddr(ep_target_regs, musb->context.index_regs[i].rxhubaddr); - musb_write_rxhubport(ep_target_regs, + musb_write_rxhubport(ep_target_regs, musb->context.index_regs[i].rxhubport); - } } musb_writeb(musb_base, MUSB_INDEX, musb->context.index); } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 586105b55a7c..c158aacd6de8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -71,10 +71,6 @@ struct musb_ep; #include <linux/usb/hcd.h> #include "musb_host.h" -#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) -#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) -#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) - /* NOTE: otg and peripheral-only state machines start at B_IDLE. * OTG or host-only go to A_IDLE when ID is sensed. */ @@ -88,8 +84,6 @@ struct musb_ep; /****************************** PERIPHERAL ROLE *****************************/ -#define is_peripheral_capable() (1) - extern irqreturn_t musb_g_ep0_irq(struct musb *); extern void musb_g_tx(struct musb *, u8); extern void musb_g_rx(struct musb *, u8); @@ -101,8 +95,6 @@ extern void musb_g_disconnect(struct musb *); /****************************** HOST ROLE ***********************************/ -#define is_host_capable() (1) - extern irqreturn_t musb_h_ep0_irq(struct musb *); extern void musb_host_tx(struct musb *, u8); extern void musb_host_rx(struct musb *, u8); @@ -376,7 +368,6 @@ struct musb { u16 epmask; u8 nr_endpoints; - u8 board_mode; /* enum musb_mode */ int (*board_set_power)(int state); u8 min_power; /* vbus for periph, in mA/2 */ @@ -446,6 +437,10 @@ struct musb { #ifdef MUSB_CONFIG_PROC_FS struct proc_dir_entry *proc_entry; #endif + int xceiv_old_state; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; +#endif }; static inline struct musb *gadget_to_musb(struct usb_gadget *g) @@ -484,7 +479,7 @@ static inline void musb_configure_ep0(struct musb *musb) static inline int musb_read_fifosize(struct musb *musb, struct musb_hw_ep *hw_ep, u8 epnum) { - void *mbase = musb->mregs; + void __iomem *mbase = musb->mregs; u8 reg = 0; /* read from core using indexed model */ @@ -526,6 +521,8 @@ extern const char musb_driver_name[]; extern void musb_start(struct musb *musb); extern void musb_stop(struct musb *musb); +extern int musb_get_id(struct device *dev, gfp_t gfp_mask); +extern void musb_put_id(struct device *dev, int id); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 40a37c91cc10..1d6e8af94c06 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -103,8 +103,6 @@ static const struct musb_register_map musb_regmap[] = { { } /* Terminating Entry */ }; -static struct dentry *musb_debugfs_root; - static int musb_regdump_show(struct seq_file *s, void *unused) { struct musb *musb = s->private; @@ -241,7 +239,7 @@ int __devinit musb_init_debugfs(struct musb *musb) struct dentry *file; int ret; - root = debugfs_create_dir("musb", NULL); + root = debugfs_create_dir(dev_name(musb->controller), NULL); if (!root) { ret = -ENOMEM; goto err0; @@ -261,7 +259,7 @@ int __devinit musb_init_debugfs(struct musb *musb) goto err1; } - musb_debugfs_root = root; + musb->debugfs_root = root; return 0; @@ -274,5 +272,5 @@ err0: void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb) { - debugfs_remove_recursive(musb_debugfs_root); + debugfs_remove_recursive(musb->debugfs_root); } diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 3a97c4e2d4f5..24d39210d4ab 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -178,7 +178,7 @@ struct dma_controller { extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit); -extern struct dma_controller *__init +extern struct dma_controller *__devinit dma_controller_create(struct musb *, void __iomem *); extern void dma_controller_destroy(struct dma_controller *); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 217808d9fbe1..444346e1e10d 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -31,11 +31,13 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/err.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> #include <linux/module.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/of.h> #include <linux/of_device.h> @@ -45,6 +47,10 @@ #include "musb_core.h" +#ifdef CONFIG_OF +static const struct of_device_id musb_dsps_of_match[]; +#endif + /** * avoid using musb_readx()/musb_writex() as glue layer should not be * dependent on musb core layer symbols. @@ -105,6 +111,8 @@ struct dsps_musb_wrapper { /* miscellaneous stuff */ u32 musb_core_offset; u8 poll_seconds; + /* number of musb instances */ + u8 instances; }; /** @@ -112,9 +120,10 @@ struct dsps_musb_wrapper { */ struct dsps_glue { struct device *dev; - struct platform_device *musb; /* child musb pdev */ + struct platform_device *musb[2]; /* child musb pdev */ const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ - struct timer_list timer; /* otg_workaround timer */ + struct timer_list timer[2]; /* otg_workaround timer */ + unsigned long last_timer[2]; /* last timer data for each instance */ }; /** @@ -137,9 +146,8 @@ static void dsps_musb_enable(struct musb *musb) dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - if (is_otg_enabled(musb)) - dsps_writel(reg_base, wrp->coreintr_set, - (1 << wrp->drvvbus) << wrp->usb_shift); + dsps_writel(reg_base, wrp->coreintr_set, + (1 << wrp->drvvbus) << wrp->usb_shift); } /** @@ -165,8 +173,8 @@ static void otg_timer(unsigned long _musb) struct musb *musb = (void *)_musb; void __iomem *mregs = musb->mregs; struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; u8 devctl; unsigned long flags; @@ -200,12 +208,9 @@ static void otg_timer(unsigned long _musb) MUSB_INTR_VBUSERROR << wrp->usb_shift); break; case OTG_STATE_B_IDLE: - if (!is_peripheral_enabled(musb)) - break; - devctl = dsps_readb(mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) - mod_timer(&glue->timer, + mod_timer(&glue->timer[pdev->id], jiffies + wrp->poll_seconds * HZ); else musb->xceiv->state = OTG_STATE_A_IDLE; @@ -219,12 +224,8 @@ static void otg_timer(unsigned long _musb) static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) { struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); - static unsigned long last_timer; - - if (!is_otg_enabled(musb)) - return; + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); if (timeout == 0) timeout = jiffies + msecs_to_jiffies(3); @@ -234,22 +235,23 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", otg_state_string(musb->xceiv->state)); - del_timer(&glue->timer); - last_timer = jiffies; + del_timer(&glue->timer[pdev->id]); + glue->last_timer[pdev->id] = jiffies; return; } - if (time_after(last_timer, timeout) && timer_pending(&glue->timer)) { + if (time_after(glue->last_timer[pdev->id], timeout) && + timer_pending(&glue->timer[pdev->id])) { dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n"); return; } - last_timer = timeout; + glue->last_timer[pdev->id] = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", otg_state_string(musb->xceiv->state), jiffies_to_msecs(timeout - jiffies)); - mod_timer(&glue->timer, timeout); + mod_timer(&glue->timer[pdev->id], timeout); } static irqreturn_t dsps_interrupt(int irq, void *hci) @@ -257,8 +259,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) struct musb *musb = hci; void __iomem *reg_base = musb->ctrl_base; struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; unsigned long flags; irqreturn_t ret = IRQ_NONE; @@ -293,7 +295,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ - if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb)) + if (usbintr & MUSB_INTR_BABBLE) pr_info("CAUTION: musb: Babble Interrupt Occured\n"); if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { @@ -302,8 +304,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) u8 devctl = dsps_readb(mregs, MUSB_DEVCTL); int err; - err = is_host_enabled(musb) && (musb->int_usb & - MUSB_INTR_VBUSERROR); + err = musb->int_usb & MUSB_INTR_VBUSERROR; if (err) { /* * The Mentor core doesn't debounce VBUS as needed @@ -318,15 +319,15 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; - mod_timer(&glue->timer, + mod_timer(&glue->timer[pdev->id], jiffies + wrp->poll_seconds * HZ); WARNING("VBUS error workaround (delay coming)\n"); - } else if (is_host_enabled(musb) && drvvbus) { + } else if (drvvbus) { musb->is_active = 1; MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; - del_timer(&glue->timer); + del_timer(&glue->timer[pdev->id]); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); @@ -352,8 +353,9 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) dsps_writel(reg_base, wrp->eoi, 1); /* Poll for ID change */ - if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + if (musb->xceiv->state == OTG_STATE_B_IDLE) + mod_timer(&glue->timer[pdev->id], + jiffies + wrp->poll_seconds * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -364,8 +366,8 @@ static int dsps_musb_init(struct musb *musb) { struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; struct omap_musb_board_data *data = plat->board_data; void __iomem *reg_base = musb->ctrl_base; @@ -375,8 +377,7 @@ static int dsps_musb_init(struct musb *musb) /* mentor core register starts at offset of 0x400 from musb base */ musb->mregs += wrp->musb_core_offset; - /* NOP driver needs change if supporting dual instance */ - usb_nop_xceiv_register(); + /* Get the NOP PHY */ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) return -ENODEV; @@ -388,8 +389,7 @@ static int dsps_musb_init(struct musb *musb) goto err0; } - if (is_host_enabled(musb)) - setup_timer(&glue->timer, otg_timer, (unsigned long) musb); + setup_timer(&glue->timer[pdev->id], otg_timer, (unsigned long) musb); /* Reset the musb */ dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); @@ -420,11 +420,10 @@ static int dsps_musb_exit(struct musb *musb) struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; - struct platform_device *pdev = to_platform_device(dev->parent); - struct dsps_glue *glue = platform_get_drvdata(pdev); + struct platform_device *pdev = to_platform_device(dev); + struct dsps_glue *glue = dev_get_drvdata(dev->parent); - if (is_host_enabled(musb)) - del_timer_sync(&glue->timer); + del_timer_sync(&glue->timer[pdev->id]); /* Shutdown the on-chip PHY and its PLL. */ if (data->set_phy_power) @@ -454,11 +453,13 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) struct device *dev = glue->dev; struct platform_device *pdev = to_platform_device(dev); struct musb_hdrc_platform_data *pdata = dev->platform_data; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; struct platform_device *musb; struct resource *res; struct resource resources[2]; char res_name[10]; - int ret; + int ret, musbid; /* get memory resource */ sprintf(res_name, "musb%d", id); @@ -479,66 +480,111 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) ret = -ENODEV; goto err0; } - strcpy((u8 *)res->name, "mc"); res->parent = NULL; resources[1] = *res; + resources[1].name = "mc"; + /* get the musb id */ + musbid = musb_get_id(dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err0; + } /* allocate the child platform device */ - musb = platform_device_alloc("musb-hdrc", -1); + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(dev, "failed to allocate musb device\n"); ret = -ENOMEM; - goto err0; + goto err1; } + musb->id = musbid; musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; - glue->musb = musb; - - pdata->platform_ops = &dsps_ops; + glue->musb[id] = musb; ret = platform_device_add_resources(musb, resources, 2); if (ret) { dev_err(dev, "failed to add resources\n"); - goto err1; + goto err2; } + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err2; + } + + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!config) { + dev_err(&pdev->dev, + "failed to allocate musb hdrc config\n"); + goto err2; + } + + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); + sprintf(res_name, "port%d-mode", id); + of_property_read_u32(np, res_name, (u32 *)&pdata->mode); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->config = config; + } + + pdata->platform_ops = &dsps_ops; + ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(dev, "failed to add platform_data\n"); - goto err1; + goto err2; } ret = platform_device_add(musb); if (ret) { dev_err(dev, "failed to register musb device\n"); - goto err1; + goto err2; } return 0; -err1: +err2: platform_device_put(musb); +err1: + musb_put_id(dev, musbid); err0: return ret; } -static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue) +static void dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id) { - platform_device_del(glue->musb); - platform_device_put(glue->musb); + musb_put_id(glue->dev, glue->musb[id]->id); + platform_device_del(glue->musb[id]); + platform_device_put(glue->musb[id]); } static int __devinit dsps_probe(struct platform_device *pdev) { - const struct platform_device_id *id = platform_get_device_id(pdev); - const struct dsps_musb_wrapper *wrp = - (struct dsps_musb_wrapper *)id->driver_data; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const struct dsps_musb_wrapper *wrp; struct dsps_glue *glue; struct resource *iomem; - int ret; + int ret, i; + + match = of_match_node(musb_dsps_of_match, np); + if (!match) { + dev_err(&pdev->dev, "fail to get matching of_match struct\n"); + ret = -EINVAL; + goto err0; + } + wrp = match->data; /* allocate glue */ glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -566,27 +612,33 @@ static int __devinit dsps_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, glue); - /* create the child platform device for first instances of musb */ - ret = dsps_create_musb_pdev(glue, 0); - if (ret != 0) { - dev_err(&pdev->dev, "failed to create child pdev\n"); - goto err2; - } - /* enable the usbss clocks */ pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); - goto err3; + goto err2; + } + + /* create the child platform device for all instances of musb */ + for (i = 0; i < wrp->instances ; i++) { + ret = dsps_create_musb_pdev(glue, i); + if (ret != 0) { + dev_err(&pdev->dev, "failed to create child pdev\n"); + /* release resources of previously created instances */ + for (i--; i >= 0 ; i--) + dsps_delete_musb_pdev(glue, i); + goto err3; + } } return 0; err3: - pm_runtime_disable(&pdev->dev); + pm_runtime_put(&pdev->dev); err2: + pm_runtime_disable(&pdev->dev); kfree(glue->wrp); err1: kfree(glue); @@ -596,9 +648,12 @@ err0: static int __devexit dsps_remove(struct platform_device *pdev) { struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + int i; /* delete the child platform device */ - dsps_delete_musb_pdev(glue); + for (i = 0; i < wrp->instances ; i++) + dsps_delete_musb_pdev(glue, i); /* disable usbss clocks */ pm_runtime_put(&pdev->dev); @@ -664,6 +719,7 @@ static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = { .rxep_bitmap = (0xfffe << 16), .musb_core_offset = 0x400, .poll_seconds = 2, + .instances = 2, }; static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { @@ -675,13 +731,14 @@ static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { }; MODULE_DEVICE_TABLE(platform, musb_dsps_id_table); +#ifdef CONFIG_OF static const struct of_device_id musb_dsps_of_match[] __devinitconst = { - { .compatible = "musb-ti81xx", }, - { .compatible = "ti,ti81xx-musb", }, - { .compatible = "ti,am335x-musb", }, + { .compatible = "ti,musb-am33xx", + .data = (void *) &ti81xx_driver_data, }, { }, }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); +#endif static struct platform_driver dsps_usbss_driver = { .probe = dsps_probe, @@ -689,7 +746,7 @@ static struct platform_driver dsps_usbss_driver = { .driver = { .name = "musb-dsps", .pm = &dsps_pm_ops, - .of_match_table = musb_dsps_of_match, + .of_match_table = of_match_ptr(musb_dsps_of_match), }, .id_table = musb_dsps_id_table, }; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f7194cf65aba..d0b87e7b4abf 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -373,7 +373,7 @@ static void txstate(struct musb *musb, struct musb_request *req) request_size = min_t(size_t, request->length - request->actual, musb_ep->dma->max_len); - use_dma = (request->dma != DMA_ADDR_INVALID); + use_dma = (request->dma != DMA_ADDR_INVALID && request_size); /* MUSB_TXCSR_P_ISO is still set correctly */ @@ -644,8 +644,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct usb_request *request = &req->request; struct musb_ep *musb_ep; void __iomem *epio = musb->endpoints[epnum].regs; - unsigned fifo_count = 0; - u16 len; + unsigned len = 0; + u16 fifo_count; u16 csr = musb_readw(epio, MUSB_RXCSR); struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; u8 use_mode_1; @@ -655,7 +655,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) else musb_ep = &hw_ep->ep_out; - len = musb_ep->packet_sz; + fifo_count = musb_ep->packet_sz; /* Check if EP is disabled */ if (!musb_ep->desc) { @@ -704,15 +704,14 @@ static void rxstate(struct musb *musb, struct musb_request *req) } if (csr & MUSB_RXCSR_RXPKTRDY) { - len = musb_readw(epio, MUSB_RXCOUNT); + fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * Enable Mode 1 on RX transfers only when short_not_ok flag - * is set. Currently short_not_ok flag is set only from - * file_storage and f_mass_storage drivers + * use mode 1 only if we expect data of at least ep packet_sz + * and have not yet received a short packet */ - - if (request->short_not_ok && len == musb_ep->packet_sz) + if ((request->length - request->actual >= musb_ep->packet_sz) && + (fifo_count >= musb_ep->packet_sz)) use_mode_1 = 1; else use_mode_1 = 0; @@ -723,31 +722,11 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; + int transfer_size; c = musb->dma_controller; channel = musb_ep->dma; - /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in - * mode 0 only. So we do not get endpoint interrupts due to DMA - * completion. We only get interrupts from DMA controller. - * - * We could operate in DMA mode 1 if we knew the size of the tranfer - * in advance. For mass storage class, request->length = what the host - * sends, so that'd work. But for pretty much everything else, - * request->length is routinely more than what the host sends. For - * most these gadgets, end of is signified either by a short packet, - * or filling the last byte of the buffer. (Sending extra data in - * that last pckate should trigger an overflow fault.) But in mode 1, - * we don't get DMA completion interrupt for short packets. - * - * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), - * to get endpoint interrupt on every DMA req, but that didn't seem - * to work reliably. - * - * REVISIT an updated g_file_storage can set req->short_not_ok, which - * then becomes usable as a runtime "use mode 1" hint... - */ - /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; @@ -764,35 +743,30 @@ static void rxstate(struct musb *musb, struct musb_request *req) csr | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, csr); + transfer_size = min(request->length - request->actual, + channel->max_len); + musb_ep->dma->desired_mode = 1; + } else { if (!musb_ep->hb_mult && musb_ep->hw_ep->rx_double_buffered) csr |= MUSB_RXCSR_AUTOCLEAR; csr |= MUSB_RXCSR_DMAENAB; musb_writew(epio, MUSB_RXCSR, csr); - } - if (request->actual < request->length) { - int transfer_size = 0; - if (use_mode_1) { - transfer_size = min(request->length - request->actual, - channel->max_len); - musb_ep->dma->desired_mode = 1; - } else { - transfer_size = min(request->length - request->actual, - (unsigned)len); - musb_ep->dma->desired_mode = 0; - } - - use_dma = c->channel_program( - channel, - musb_ep->packet_sz, - channel->desired_mode, - request->dma - + request->actual, - transfer_size); + transfer_size = min(request->length - request->actual, + (unsigned)fifo_count); + musb_ep->dma->desired_mode = 0; } + use_dma = c->channel_program( + channel, + musb_ep->packet_sz, + channel->desired_mode, + request->dma + + request->actual, + transfer_size); + if (use_dma) return; } @@ -808,8 +782,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) channel = musb_ep->dma; /* In case first packet is short */ - if (len < musb_ep->packet_sz) - transfer_size = len; + if (fifo_count < musb_ep->packet_sz) + transfer_size = fifo_count; else if (request->short_not_ok) transfer_size = min(request->length - request->actual, @@ -817,7 +791,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) else transfer_size = min(request->length - request->actual, - (unsigned)len); + (unsigned)fifo_count); csr &= ~MUSB_RXCSR_DMAMODE; csr |= (MUSB_RXCSR_DMAENAB | @@ -845,10 +819,10 @@ static void rxstate(struct musb *musb, struct musb_request *req) } #endif /* Mentor's DMA */ - fifo_count = request->length - request->actual; + len = request->length - request->actual; dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n", musb_ep->end_point.name, - len, fifo_count, + fifo_count, len, musb_ep->packet_sz); fifo_count = min_t(unsigned, len, fifo_count); @@ -901,7 +875,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) } /* reach the end or short packet detected */ - if (request->actual == request->length || len < musb_ep->packet_sz) + if (request->actual == request->length || + fifo_count < musb_ep->packet_sz) musb_g_giveback(musb_ep, request, 0); } @@ -1885,8 +1860,7 @@ int __devinit musb_gadget_setup(struct musb *musb) musb->g.dev.release = musb_gadget_release; musb->g.name = musb_driver_name; - if (is_otg_enabled(musb)) - musb->g.is_otg = 1; + musb->g.is_otg = 1; musb_g_init_endpoints(musb); @@ -1932,11 +1906,14 @@ static int musb_gadget_start(struct usb_gadget *g, { struct musb *musb = gadget_to_musb(g); struct usb_otg *otg = musb->xceiv->otg; + struct usb_hcd *hcd = musb_to_hcd(musb); unsigned long flags; - int retval = -EINVAL; + int retval = 0; - if (driver->max_speed < USB_SPEED_HIGH) - goto err0; + if (driver->max_speed < USB_SPEED_HIGH) { + retval = -EINVAL; + goto err; + } pm_runtime_get_sync(musb->controller); @@ -1950,49 +1927,30 @@ static int musb_gadget_start(struct usb_gadget *g, otg_set_peripheral(otg, &musb->g); musb->xceiv->state = OTG_STATE_B_IDLE; - - /* - * FIXME this ignores the softconnect flag. Drivers are - * allowed hold the peripheral inactive until for example - * userspace hooks up printer hardware or DSP codecs, so - * hosts only see fully functional devices. - */ - - if (!is_otg_enabled(musb)) - musb_start(musb); - spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); - - dev_dbg(musb->controller, "OTG startup...\n"); + /* REVISIT: funcall to other code, which also + * handles power budgeting ... this way also + * ensures HdrcStart is indirectly called. + */ + retval = usb_add_hcd(hcd, 0, 0); + if (retval < 0) { + dev_dbg(musb->controller, "add_hcd failed, %d\n", retval); + goto err; + } - /* REVISIT: funcall to other code, which also - * handles power budgeting ... this way also - * ensures HdrcStart is indirectly called. - */ - retval = usb_add_hcd(musb_to_hcd(musb), 0, 0); - if (retval < 0) { - dev_dbg(musb->controller, "add_hcd failed, %d\n", retval); - goto err2; - } + if ((musb->xceiv->last_event == USB_EVENT_ID) + && otg->set_vbus) + otg_set_vbus(otg, 1); - if ((musb->xceiv->last_event == USB_EVENT_ID) - && otg->set_vbus) - otg_set_vbus(otg, 1); + hcd->self.uses_pio_for_control = 1; - hcd->self.uses_pio_for_control = 1; - } if (musb->xceiv->last_event == USB_EVENT_NONE) pm_runtime_put(musb->controller); return 0; -err2: - if (!is_otg_enabled(musb)) - musb_stop(musb); -err0: +err: return retval; } @@ -2070,16 +2028,12 @@ static int musb_gadget_stop(struct usb_gadget *g, musb_platform_try_idle(musb, 0); spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - usb_remove_hcd(musb_to_hcd(musb)); - /* FIXME we need to be able to register another - * gadget driver here and have everything work; - * that currently misbehaves. - */ - } - - if (!is_otg_enabled(musb)) - musb_stop(musb); + usb_remove_hcd(musb_to_hcd(musb)); + /* + * FIXME we need to be able to register another + * gadget driver here and have everything work; + * that currently misbehaves. + */ pm_runtime_put(musb->controller); @@ -2241,13 +2195,11 @@ __acquires(musb->lock) if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_PERIPHERAL; musb->g.is_a_peripheral = 0; - } else if (is_otg_enabled(musb)) { + } else { musb->xceiv->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; - } else - WARN_ON(1); + } /* start with default limits on VBUS power draw */ - (void) musb_gadget_vbus_draw(&musb->g, - is_otg_enabled(musb) ? 8 : 100); + (void) musb_gadget_vbus_draw(&musb->g, 8); } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4bb717d0bd41..3df6a76b851d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -693,6 +693,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, void __iomem *epio = hw_ep->regs; struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out); u16 packet_sz = qh->maxpacket; + u8 use_dma = 1; + u16 csr; dev_dbg(musb->controller, "%s hw%d urb %p spd%d dev%d ep%d%s " "h_addr%02x h_port%02x bytes %d\n", @@ -704,9 +706,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, musb_ep_select(mbase, epnum); + if (is_out && !len) { + use_dma = 0; + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, csr); + hw_ep->tx_channel = NULL; + } + /* candidate for DMA? */ dma_controller = musb->dma_controller; - if (is_dma_capable() && epnum && dma_controller) { + if (use_dma && is_dma_capable() && epnum && dma_controller) { dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel; if (!dma_channel) { dma_channel = dma_controller->channel_alloc( @@ -813,9 +823,28 @@ static void musb_ep_program(struct musb *musb, u8 epnum, if (load_count) { /* PIO to load FIFO */ qh->segsize = load_count; - musb_write_fifo(hw_ep, load_count, buf); + if (!buf) { + sg_miter_start(&qh->sg_miter, urb->sg, 1, + SG_MITER_ATOMIC + | SG_MITER_FROM_SG); + if (!sg_miter_next(&qh->sg_miter)) { + dev_err(musb->controller, + "error: sg" + "list empty\n"); + sg_miter_stop(&qh->sg_miter); + goto finish; + } + buf = qh->sg_miter.addr + urb->sg->offset + + urb->actual_length; + load_count = min_t(u32, load_count, + qh->sg_miter.length); + musb_write_fifo(hw_ep, load_count, buf); + qh->sg_miter.consumed = load_count; + sg_miter_stop(&qh->sg_miter); + } else + musb_write_fifo(hw_ep, load_count, buf); } - +finish: /* re-enable interrupt */ musb_writew(mbase, MUSB_INTRTXE, int_txe); @@ -882,6 +911,73 @@ static void musb_ep_program(struct musb *musb, u8 epnum, } } +/* Schedule next QH from musb->in_bulk/out_bulk and move the current qh to + * the end; avoids starvation for other endpoints. + */ +static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, + int is_in) +{ + struct dma_channel *dma; + struct urb *urb; + void __iomem *mbase = musb->mregs; + void __iomem *epio = ep->regs; + struct musb_qh *cur_qh, *next_qh; + u16 rx_csr, tx_csr; + + musb_ep_select(mbase, ep->epnum); + if (is_in) { + dma = is_dma_capable() ? ep->rx_channel : NULL; + + /* clear nak timeout bit */ + rx_csr = musb_readw(epio, MUSB_RXCSR); + rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_DATAERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); + + cur_qh = first_qh(&musb->in_bulk); + } else { + dma = is_dma_capable() ? ep->tx_channel : NULL; + + /* clear nak timeout bit */ + tx_csr = musb_readw(epio, MUSB_TXCSR); + tx_csr |= MUSB_TXCSR_H_WZC_BITS; + tx_csr &= ~MUSB_TXCSR_H_NAKTIMEOUT; + musb_writew(epio, MUSB_TXCSR, tx_csr); + + cur_qh = first_qh(&musb->out_bulk); + } + if (cur_qh) { + urb = next_urb(cur_qh); + if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { + dma->status = MUSB_DMA_STATUS_CORE_ABORT; + musb->dma_controller->channel_abort(dma); + urb->actual_length += dma->actual_len; + dma->actual_len = 0L; + } + musb_save_toggle(cur_qh, is_in, urb); + + if (is_in) { + /* move cur_qh to end of queue */ + list_move_tail(&cur_qh->ring, &musb->in_bulk); + + /* get the next qh from musb->in_bulk */ + next_qh = first_qh(&musb->in_bulk); + + /* set rx_reinit and schedule the next qh */ + ep->rx_reinit = 1; + } else { + /* move cur_qh to end of queue */ + list_move_tail(&cur_qh->ring, &musb->out_bulk); + + /* get the next qh from musb->out_bulk */ + next_qh = first_qh(&musb->out_bulk); + + /* set tx_reinit and schedule the next qh */ + ep->tx_reinit = 1; + } + musb_start_urb(musb, is_in, next_qh); + } +} /* * Service the default endpoint (ep0) as host. @@ -1116,6 +1212,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; + static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1146,23 +1243,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) status = -ETIMEDOUT; } else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) { - dev_dbg(musb->controller, "TX end=%d device not responding\n", epnum); - - /* NOTE: this code path would be a good place to PAUSE a - * transfer, if there's some other (nonperiodic) tx urb - * that could use this fifo. (dma complicates it...) - * That's already done for bulk RX transfers. - * - * if (bulk && qh->ring.next != &musb->out_bulk), then - * we have a candidate... NAKing is *NOT* an error - */ - musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_TXCSR, - MUSB_TXCSR_H_WZC_BITS - | MUSB_TXCSR_TXPKTRDY); - return; + if (USB_ENDPOINT_XFER_BULK == qh->type && qh->mux == 1 + && !list_is_singular(&musb->out_bulk)) { + dev_dbg(musb->controller, + "NAK timeout on TX%d ep\n", epnum); + musb_bulk_nak_timeout(musb, hw_ep, 0); + } else { + dev_dbg(musb->controller, + "TX end=%d device not responding\n", epnum); + /* NOTE: this code path would be a good place to PAUSE a + * transfer, if there's some other (nonperiodic) tx urb + * that could use this fifo. (dma complicates it...) + * That's already done for bulk RX transfers. + * + * if (bulk && qh->ring.next != &musb->out_bulk), then + * we have a candidate... NAKing is *NOT* an error + */ + musb_ep_select(mbase, epnum); + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS + | MUSB_TXCSR_TXPKTRDY); + } + return; } +done: if (status) { if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { dma->status = MUSB_DMA_STATUS_CORE_ABORT; @@ -1332,9 +1437,38 @@ void musb_host_tx(struct musb *musb, u8 epnum) length = qh->maxpacket; /* Unmap the buffer so that CPU can use it */ usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); - musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + + /* + * We need to map sg if the transfer_buffer is + * NULL. + */ + if (!urb->transfer_buffer) + use_sg = true; + + if (use_sg) { + /* sg_miter_start is already done in musb_ep_program */ + if (!sg_miter_next(&qh->sg_miter)) { + dev_err(musb->controller, "error: sg list empty\n"); + sg_miter_stop(&qh->sg_miter); + status = -EINVAL; + goto done; + } + urb->transfer_buffer = qh->sg_miter.addr; + length = min_t(u32, length, qh->sg_miter.length); + musb_write_fifo(hw_ep, length, urb->transfer_buffer); + qh->sg_miter.consumed = length; + sg_miter_stop(&qh->sg_miter); + } else { + musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + } + qh->segsize = length; + if (use_sg) { + if (offset + length >= urb->transfer_buffer_length) + use_sg = false; + } + musb_ep_select(mbase, epnum); musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); @@ -1380,50 +1514,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) #endif -/* Schedule next QH from musb->in_bulk and move the current qh to - * the end; avoids starvation for other endpoints. - */ -static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep) -{ - struct dma_channel *dma; - struct urb *urb; - void __iomem *mbase = musb->mregs; - void __iomem *epio = ep->regs; - struct musb_qh *cur_qh, *next_qh; - u16 rx_csr; - - musb_ep_select(mbase, ep->epnum); - dma = is_dma_capable() ? ep->rx_channel : NULL; - - /* clear nak timeout bit */ - rx_csr = musb_readw(epio, MUSB_RXCSR); - rx_csr |= MUSB_RXCSR_H_WZC_BITS; - rx_csr &= ~MUSB_RXCSR_DATAERROR; - musb_writew(epio, MUSB_RXCSR, rx_csr); - - cur_qh = first_qh(&musb->in_bulk); - if (cur_qh) { - urb = next_urb(cur_qh); - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - musb->dma_controller->channel_abort(dma); - urb->actual_length += dma->actual_len; - dma->actual_len = 0L; - } - musb_save_toggle(cur_qh, 1, urb); - - /* move cur_qh to end of queue */ - list_move_tail(&cur_qh->ring, &musb->in_bulk); - - /* get the next qh from musb->in_bulk */ - next_qh = first_qh(&musb->in_bulk); - - /* set rx_reinit and schedule the next qh */ - ep->rx_reinit = 1; - musb_start_urb(musb, 1, next_qh); - } -} - /* * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso, * and high-bandwidth IN transfer cases. @@ -1442,6 +1532,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; + static bool use_sg; + unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1500,7 +1592,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (usb_pipebulk(urb->pipe) && qh->mux == 1 && !list_is_singular(&musb->in_bulk)) { - musb_bulk_rx_nak_timeout(musb, hw_ep); + musb_bulk_nak_timeout(musb, hw_ep, 1); return; } musb_ep_select(mbase, epnum); @@ -1756,10 +1848,43 @@ void musb_host_rx(struct musb *musb, u8 epnum) #endif /* Mentor DMA */ if (!dma) { + unsigned int received_len; + /* Unmap the buffer so that CPU can use it */ usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); - done = musb_host_packet_rx(musb, urb, - epnum, iso_err); + + /* + * We need to map sg if the transfer_buffer is + * NULL. + */ + if (!urb->transfer_buffer) { + use_sg = true; + sg_miter_start(&qh->sg_miter, urb->sg, 1, + sg_flags); + } + + if (use_sg) { + if (!sg_miter_next(&qh->sg_miter)) { + dev_err(musb->controller, "error: sg list empty\n"); + sg_miter_stop(&qh->sg_miter); + status = -EINVAL; + done = true; + goto finish; + } + urb->transfer_buffer = qh->sg_miter.addr; + received_len = urb->actual_length; + qh->offset = 0x0; + done = musb_host_packet_rx(musb, urb, epnum, + iso_err); + /* Calculate the number of bytes received */ + received_len = urb->actual_length - + received_len; + qh->sg_miter.consumed = received_len; + sg_miter_stop(&qh->sg_miter); + } else { + done = musb_host_packet_rx(musb, urb, + epnum, iso_err); + } dev_dbg(musb->controller, "read %spacket\n", done ? "last " : ""); } } @@ -1768,6 +1893,9 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { + if (use_sg) + use_sg = false; + if (urb->status == -EINPROGRESS) urb->status = status; musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN); @@ -1863,14 +1991,14 @@ static int musb_schedule( else head = &musb->out_bulk; - /* Enable bulk RX NAK timeout scheme when bulk requests are + /* Enable bulk RX/TX NAK timeout scheme when bulk requests are * multiplexed. This scheme doen't work in high speed to full * speed scenario as NAK interrupts are not coming from a * full speed device connected to a high speed device. * NAK timeout interval is 8 (128 uframe or 16ms) for HS and * 4 (8 frame or 8ms) for FS device. */ - if (is_in && qh->dev) + if (qh->dev) qh->intv_reg = (USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4; goto success; @@ -2049,7 +2177,7 @@ static int musb_urb_enqueue( * we only have work to do in the former case. */ spin_lock_irqsave(&musb->lock, flags); - if (hep->hcpriv) { + if (hep->hcpriv || !next_urb(qh)) { /* some concurrent activity submitted another urb to hep... * odd, rare, error prone, but legal. */ diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 622d09fb9aba..5a9c8feec10c 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -35,6 +35,8 @@ #ifndef _MUSB_HOST_H #define _MUSB_HOST_H +#include <linux/scatterlist.h> + static inline struct usb_hcd *musb_to_hcd(struct musb *musb) { return container_of((void *) musb, struct usb_hcd, hcd_priv); @@ -71,6 +73,7 @@ struct musb_qh { u16 maxpacket; u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ + struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ }; /* map from control or bulk queue head to the first qh on that ring */ diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 22ec3e379980..f70579154ded 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -81,8 +81,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) switch (musb->xceiv->state) { case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; if (musb->is_active) mod_timer(&musb->otg_timer, jiffies + msecs_to_jiffies( @@ -91,8 +90,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) break; case OTG_STATE_B_HOST: musb->xceiv->state = OTG_STATE_B_WAIT_ACON; - musb->is_active = is_otg_enabled(musb) - && otg->host->b_hnp_enable; + musb->is_active = otg->host->b_hnp_enable; musb_platform_try_idle(musb, 0); break; default: @@ -190,8 +188,7 @@ void musb_root_disconnect(struct musb *musb) switch (musb->xceiv->state) { case OTG_STATE_A_SUSPEND: - if (is_otg_enabled(musb) - && otg->host->b_hnp_enable) { + if (otg->host->b_hnp_enable) { musb->xceiv->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; break; @@ -273,7 +270,7 @@ int musb_hub_control( musb_port_suspend(musb, false); break; case USB_PORT_FEAT_POWER: - if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) + if (!hcd->self.is_b_host) musb_platform_set_vbus(musb, 0); break; case USB_PORT_FEAT_C_CONNECTION: @@ -369,7 +366,7 @@ int musb_hub_control( * initialization logic, e.g. for OTG, or change any * logic relating to VBUS power-up. */ - if (!(is_otg_enabled(musb) && hcd->self.is_b_host)) + if (!hcd->self.is_b_host) musb_start(musb); break; case USB_PORT_FEAT_RESET: diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 57a608584e16..0fc6ca6bc60a 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -380,7 +380,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *base) { struct musb_dma_controller *controller; @@ -388,7 +388,7 @@ dma_controller_create(struct musb *musb, void __iomem *base) struct platform_device *pdev = to_platform_device(dev); int irq = platform_get_irq_byname(pdev, "dma"); - if (irq == 0) { + if (irq <= 0) { dev_err(dev, "No DMA interrupt line!\n"); return NULL; } diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 5fdb9da8dd56..a538fe17a966 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -30,10 +30,12 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> #include <linux/err.h> +#include <linux/delay.h> #include <linux/usb/musb-omap.h> #include "musb_core.h" @@ -44,6 +46,7 @@ struct omap2430_glue { struct platform_device *musb; enum omap_musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; + u32 __iomem *control_otghs; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -51,6 +54,26 @@ struct omap2430_glue *_glue; static struct timer_list musb_idle_timer; +/** + * omap4_usb_phy_mailbox - write to usb otg mailbox + * @glue: struct omap2430_glue * + * @val: the value to be written to the mailbox + * + * On detection of a device (ID pin is grounded), this API should be called + * to set AVALID, VBUSVALID and ID pin is grounded. + * + * When OMAP is connected to a host (OMAP in device mode), this API + * is called to set AVALID, VBUSVALID and ID pin in high impedance. + * + * XXX: This function will be removed once we have a seperate driver for + * control module + */ +static void omap4_usb_phy_mailbox(struct omap2430_glue *glue, u32 val) +{ + if (glue->control_otghs) + writel(val, glue->control_otghs); +} + static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; @@ -140,7 +163,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) struct usb_otg *otg = musb->xceiv->otg; u8 devctl; unsigned long timeout = jiffies + msecs_to_jiffies(1000); - int ret = 1; /* HDRC controls CPEN, but beware current surges during device * connect. They can trigger transient overcurrent conditions * that must be ignored. @@ -150,6 +172,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) if (is_on) { if (musb->xceiv->state == OTG_STATE_A_IDLE) { + int loops = 100; /* start the session */ devctl |= MUSB_DEVCTL_SESSION; musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); @@ -159,17 +182,18 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) */ while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { + mdelay(5); cpu_relax(); - if (time_after(jiffies, timeout)) { + if (time_after(jiffies, timeout) + || loops-- <= 0) { dev_err(musb->controller, "configured as A device timeout"); - ret = -EINVAL; break; } } - if (ret && otg->set_vbus) + if (otg->set_vbus) otg_set_vbus(otg, 1); } else { musb->is_active = 1; @@ -245,6 +269,7 @@ EXPORT_SYMBOL_GPL(omap_musb_mailbox); static void omap_musb_set_mailbox(struct omap2430_glue *glue) { + u32 val; struct musb *musb = glue_to_musb(glue); struct device *dev = musb->controller; struct musb_hdrc_platform_data *pdata = dev->platform_data; @@ -258,9 +283,10 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) otg->default_a = true; musb->xceiv->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; - if (!is_otg_enabled(musb) || musb->gadget_driver) { + if (musb->gadget_driver) { pm_runtime_get_sync(dev); - usb_phy_init(musb->xceiv); + val = AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); omap2430_musb_set_vbus(musb, 1); } break; @@ -273,7 +299,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_VBUS; if (musb->gadget_driver) pm_runtime_get_sync(dev); - usb_phy_init(musb->xceiv); + val = IDDIG | AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); break; case OMAP_MUSB_ID_FLOAT: @@ -281,17 +308,17 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) - if (musb->gadget_driver) { - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } + if (musb->gadget_driver) { + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } if (data->interface_type == MUSB_INTERFACE_UTMI) { if (musb->xceiv->otg->set_vbus) otg_set_vbus(musb->xceiv->otg, 0); } - usb_phy_shutdown(musb->xceiv); + val = SESSEND | IDDIG; + omap4_usb_phy_mailbox(glue, val); break; default: dev_dbg(dev, "ID float\n"); @@ -366,6 +393,7 @@ err1: static void omap2430_musb_enable(struct musb *musb) { u8 devctl; + u32 val; unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); @@ -375,7 +403,8 @@ static void omap2430_musb_enable(struct musb *musb) switch (glue->status) { case OMAP_MUSB_ID_GROUND: - usb_phy_init(musb->xceiv); + val = AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); if (data->interface_type != MUSB_INTERFACE_UTMI) break; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); @@ -394,7 +423,8 @@ static void omap2430_musb_enable(struct musb *musb) break; case OMAP_MUSB_VBUS_VALID: - usb_phy_init(musb->xceiv); + val = IDDIG | AVALID | VBUSVALID; + omap4_usb_phy_mailbox(glue, val); break; default: @@ -404,11 +434,14 @@ static void omap2430_musb_enable(struct musb *musb) static void omap2430_musb_disable(struct musb *musb) { + u32 val; struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - if (glue->status != OMAP_MUSB_UNKNOWN) - usb_phy_shutdown(musb->xceiv); + if (glue->status != OMAP_MUSB_UNKNOWN) { + val = SESSEND | IDDIG; + omap4_usb_phy_mailbox(glue, val); + } } static int omap2430_musb_exit(struct musb *musb) @@ -438,9 +471,14 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32); static int __devinit omap2430_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; + struct omap_musb_board_data *data; struct platform_device *musb; struct omap2430_glue *glue; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; + struct resource *res; int ret = -ENOMEM; + int musbid; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -448,12 +486,21 @@ static int __devinit omap2430_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err0; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err0; + goto err1; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &omap2430_dmamask; musb->dev.coherent_dma_mask = omap2430_dmamask; @@ -462,6 +509,48 @@ static int __devinit omap2430_probe(struct platform_device *pdev) glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + glue->control_otghs = devm_request_and_ioremap(&pdev->dev, res); + if (glue->control_otghs == NULL) + dev_dbg(&pdev->dev, "Failed to obtain control memory\n"); + + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err1; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, + "failed to allocate musb board data\n"); + ret = -ENOMEM; + goto err1; + } + + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, + "failed to allocate musb hdrc config\n"); + goto err1; + } + + of_property_read_u32(np, "mode", (u32 *)&pdata->mode); + of_property_read_u32(np, "interface_type", + (u32 *)&data->interface_type); + of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->board_data = data; + pdata->config = config; + } + pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); @@ -478,13 +567,13 @@ static int __devinit omap2430_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err1; + goto err2; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err1; + goto err2; } pm_runtime_enable(&pdev->dev); @@ -492,14 +581,17 @@ static int __devinit omap2430_probe(struct platform_device *pdev) ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err1; + goto err2; } return 0; -err1: +err2: platform_device_put(musb); +err1: + musb_put_id(&pdev->dev, musbid); + err0: return ret; } @@ -509,8 +601,8 @@ static int __devexit omap2430_remove(struct platform_device *pdev) struct omap2430_glue *glue = platform_get_drvdata(pdev); cancel_work_sync(&glue->omap_musb_mailbox_work); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + musb_put_id(&pdev->dev, glue->musb->id); + platform_device_unregister(glue->musb); return 0; } @@ -559,12 +651,26 @@ static struct dev_pm_ops omap2430_pm_ops = { #define DEV_PM_OPS NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id omap2430_id_table[] = { + { + .compatible = "ti,omap4-musb" + }, + { + .compatible = "ti,omap3-musb" + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap2430_id_table); +#endif + static struct platform_driver omap2430_driver = { .probe = omap2430_probe, .remove = __devexit_p(omap2430_remove), .driver = { .name = "musb-omap2430", .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap2430_id_table), }, }; diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 40b3c02ae9f0..b85f3973e78c 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -49,4 +49,13 @@ #define OTG_FORCESTDBY 0x414 # define ENABLEFORCE (1 << 0) +/* + * Control Module bit definitions + * XXX: Will be removed once we have a driver for control module. + */ +#define AVALID BIT(0) +#define BVALID BIT(1) +#define VBUSVALID BIT(2) +#define SESSEND BIT(3) +#define IDDIG BIT(4) #endif /* __MUSB_OMAP243X_H__ */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 1a1bd9cf40c5..dc4d75ea13ad 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -24,6 +24,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include "musb_core.h" @@ -153,7 +154,7 @@ tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len) } static inline void tusb_fifo_read_unaligned(void __iomem *fifo, - void __iomem *buf, u16 len) + void *buf, u16 len) { u32 val; int i; @@ -437,14 +438,13 @@ static void musb_do_idle(unsigned long _musb) if (is_host_active(musb) && (musb->port1_status >> 16)) goto done; - if (is_peripheral_enabled(musb) && !musb->gadget_driver) { + if (!musb->gadget_driver) { wakeups = 0; } else { wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS | TUSB_PRCM_WVBUS; - if (is_otg_enabled(musb)) - wakeups |= TUSB_PRCM_WID; + wakeups |= TUSB_PRCM_WID; } tusb_allow_idle(musb, wakeups); } @@ -582,21 +582,12 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) * * Note that if a mini-A cable is plugged in the ID line will stay down as * the weak ID pull-up is not able to pull the ID up. - * - * REVISIT: It would be possible to add support for changing between host - * and peripheral modes in non-OTG configurations by reconfiguring hardware - * and then setting musb->board_mode. For now, only support OTG mode. */ static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode) { void __iomem *tbase = musb->ctrl_base; u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf; - if (musb->board_mode != MUSB_OTG) { - ERR("Changing mode currently only supported in OTG mode\n"); - return -EINVAL; - } - otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL); phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE); @@ -652,10 +643,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) { int default_a; - if (is_otg_enabled(musb)) - default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); - else - default_a = is_host_enabled(musb); + default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B'); otg->default_a = default_a; tusb_musb_set_vbus(musb, default_a); @@ -669,8 +657,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) { /* B-dev state machine: no vbus ~= disconnect */ - if ((is_otg_enabled(musb) && !otg->default_a) - || !is_host_enabled(musb)) { + if (!otg->default_a) { /* ? musb_root_disconnect(musb); */ musb->port1_status &= ~(USB_PORT_STAT_CONNECTION @@ -1119,10 +1106,8 @@ static int tusb_musb_init(struct musb *musb) } musb->isr = tusb_musb_interrupt; - if (is_peripheral_enabled(musb)) { - musb->xceiv->set_power = tusb_draw_power; - the_musb = musb; - } + musb->xceiv->set_power = tusb_draw_power; + the_musb = musb; setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); @@ -1175,6 +1160,7 @@ static int __devinit tusb_probe(struct platform_device *pdev) struct tusb6010_glue *glue; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -1182,12 +1168,21 @@ static int __devinit tusb_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &tusb_dmamask; musb->dev.coherent_dma_mask = tusb_dmamask; @@ -1203,26 +1198,29 @@ static int __devinit tusb_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; + goto err3; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; + goto err3; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err1; + goto err3; } return 0; -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -1234,6 +1232,7 @@ static int __devexit tusb_remove(struct platform_device *pdev) { struct tusb6010_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); kfree(glue); diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index b67b4bc596c1..7a62b95dac24 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -17,7 +17,6 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> #include "musb_core.h" #include "tusb6010.h" @@ -662,7 +661,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(tusb_dma); } -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *base) { void __iomem *tbase = musb->ctrl_base; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index a8c0fadce1b0..d62a91fedc22 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -74,25 +74,34 @@ static int __devinit ux500_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } clk = clk_get(&pdev->dev, "usb"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); - goto err2; + goto err3; } ret = clk_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; + goto err4; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = pdev->dev.dma_mask; musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; @@ -109,32 +118,35 @@ static int __devinit ux500_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err5; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err5; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err5; } return 0; -err4: +err5: clk_disable(clk); -err3: +err4: clk_put(clk); -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -146,6 +158,7 @@ static int __devexit ux500_remove(struct platform_device *pdev) { struct ux500_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); clk_disable(glue->clk); diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index d05c7fbbb703..f1059e725ea8 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -30,7 +30,7 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/pfn.h> -#include <mach/usb.h> +#include <linux/platform_data/usb-musb-ux500.h> #include "musb_core.h" struct ux500_dma_channel { @@ -364,7 +364,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } -struct dma_controller *__init +struct dma_controller *__devinit dma_controller_create(struct musb *musb, void __iomem *base) { struct ux500_dma_controller *controller; diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 13fd1ddf742f..d8c8a42bff3e 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE + depends on TWL4030_CORE && OMAP_USB2 select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index 23c798cb2d7f..c19d1d7173a9 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -544,9 +544,13 @@ int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) */ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; - if (!otg || otg_dev != fsl_otg_dev) + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) return -ENODEV; otg->host = host; @@ -590,12 +594,15 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) static int fsl_otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + if (!otg) + return -ENODEV; + + otg_dev = container_of(otg->phy, struct fsl_otg, phy); VDBG("otg_dev 0x%x\n", (int)otg_dev); VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); - - if (!otg || otg_dev != fsl_otg_dev) + if (otg_dev != fsl_otg_dev) return -ENODEV; if (!gadget) { @@ -660,10 +667,13 @@ static void fsl_otg_event(struct work_struct *work) /* B-device start SRP */ static int fsl_otg_start_srp(struct usb_otg *otg) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + + if (!otg || otg->phy->state != OTG_STATE_B_IDLE) + return -ENODEV; - if (!otg || otg_dev != fsl_otg_dev - || otg->phy->state != OTG_STATE_B_IDLE) + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) return -ENODEV; otg_dev->fsm.b_bus_req = 1; @@ -675,9 +685,13 @@ static int fsl_otg_start_srp(struct usb_otg *otg) /* A_host suspend will call this function to start hnp */ static int fsl_otg_start_hnp(struct usb_otg *otg) { - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; - if (!otg || otg_dev != fsl_otg_dev) + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) return -ENODEV; DBG("start_hnp...n"); diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index 720df35561c9..ceee2119bffa 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -36,7 +36,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h> diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c index c1a67cb8e244..88db976647cf 100644 --- a/drivers/usb/otg/mxs-phy.c +++ b/drivers/usb/otg/mxs-phy.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/workqueue.h> #define DRIVER_NAME "mxs_phy" @@ -34,9 +35,16 @@ #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +/* + * Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit + * so that connection and reset processing can be completed for the root hub. + */ +#define MXY_PHY_ENHOSTDISCONDETECT_DELAY 250 + struct mxs_phy { struct usb_phy phy; struct clk *clk; + struct delayed_work enhostdiscondetect_work; }; #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) @@ -62,6 +70,7 @@ static int mxs_phy_init(struct usb_phy *phy) clk_prepare_enable(mxs_phy->clk); mxs_phy_hw_init(mxs_phy); + INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL); return 0; } @@ -76,13 +85,34 @@ static void mxs_phy_shutdown(struct usb_phy *phy) clk_disable_unprepare(mxs_phy->clk); } +static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws) +{ + struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy, + enhostdiscondetect_work.work); + + /* Enable HOSTDISCONDETECT after delay. */ + dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n"); + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET); +} + static int mxs_phy_on_connect(struct usb_phy *phy, int port) { + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + dev_dbg(phy->dev, "Connect on port %d\n", port); - mxs_phy_hw_init(to_mxs_phy(phy)); - writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_SET); + mxs_phy_hw_init(mxs_phy); + + /* + * Delay enabling ENHOSTDISCONDETECT so that connection and + * reset processing can be completed for the root hub. + */ + dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n"); + PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, + mxs_phy_enhostdiscondetect_delay); + schedule_delayed_work(&mxs_phy->enhostdiscondetect_work, + msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY)); return 0; } @@ -91,6 +121,8 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy, int port) { dev_dbg(phy->dev, "Disconnect on port %d\n", port); + /* No need to delay before clearing ENHOSTDISCONDETECT. */ + dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n"); writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, phy->io_priv + HW_USBPHY_CTRL_CLR); diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 803f958f4133..e52e35e7adaf 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -30,6 +30,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/slab.h> struct nop_usb_xceiv { @@ -94,7 +95,9 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) { + struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; struct nop_usb_xceiv *nop; + enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; nop = kzalloc(sizeof *nop, GFP_KERNEL); @@ -107,6 +110,9 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) return -ENOMEM; } + if (pdata) + type = pdata->type; + nop->dev = &pdev->dev; nop->phy.dev = nop->dev; nop->phy.label = "nop-xceiv"; @@ -117,7 +123,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) nop->phy.otg->set_host = nop_set_host; nop->phy.otg->set_peripheral = nop_set_peripheral; - err = usb_add_phy(&nop->phy, USB_PHY_TYPE_USB2); + err = usb_add_phy(&nop->phy, type); if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index 1bf60a22595c..a30c04115115 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -159,7 +159,7 @@ int usb_add_phy(struct usb_phy *x, enum usb_phy_type type) unsigned long flags; struct usb_phy *phy; - if (x && x->type != USB_PHY_TYPE_UNDEFINED) { + if (x->type != USB_PHY_TYPE_UNDEFINED) { dev_err(x->dev, "not accepting initialized PHY %s\n", x->label); return -EINVAL; } diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 523cad5bfea9..f0d2e7530cfe 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -585,23 +585,28 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb *twl; int status, err; struct usb_otg *otg; - - if (!pdata) { - dev_dbg(&pdev->dev, "platform_data not available\n"); - return -EINVAL; - } + struct device_node *np = pdev->dev.of_node; twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) + twl->usb_mode = pdata->usb_mode; + else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); if (!otg) return -ENOMEM; twl->dev = &pdev->dev; twl->irq = platform_get_irq(pdev, 0); - twl->usb_mode = pdata->usb_mode; twl->vbus_supplied = false; twl->asleep = 1; twl->linkstat = OMAP_MUSB_UNKNOWN; @@ -690,12 +695,21 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + static struct platform_driver twl4030_usb_driver = { .probe = twl4030_usb_probe, .remove = __exit_p(twl4030_usb_remove), .driver = { .name = "twl4030_usb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl4030_usb_id_table), }, }; diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index 6907d8df7a27..fcadef7864f1 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -25,8 +25,9 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/usb/otg.h> #include <linux/usb/musb-omap.h> +#include <linux/usb/phy_companion.h> +#include <linux/usb/omap_usb.h> #include <linux/i2c/twl.h> #include <linux/regulator/consumer.h> #include <linux/err.h> @@ -87,7 +88,7 @@ #define VBUS_DET BIT(2) struct twl6030_usb { - struct usb_phy phy; + struct phy_companion comparator; struct device *dev; /* for vbus reporting with irqs disabled */ @@ -104,10 +105,10 @@ struct twl6030_usb { u8 asleep; bool irq_enabled; bool vbus_enable; - unsigned long features; + const char *regulator; }; -#define phy_to_twl(x) container_of((x), struct twl6030_usb, phy) +#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator) /*-------------------------------------------------------------------------*/ @@ -137,50 +138,9 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) return ret; } -static int twl6030_phy_init(struct usb_phy *x) +static int twl6030_start_srp(struct phy_companion *comparator) { - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = phy_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - - if (twl->linkstat == OMAP_MUSB_ID_GROUND) - pdata->phy_power(twl->dev, 1, 1); - else - pdata->phy_power(twl->dev, 0, 1); - - return 0; -} - -static void twl6030_phy_shutdown(struct usb_phy *x) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = phy_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - pdata->phy_power(twl->dev, 0, 0); -} - -static int twl6030_phy_suspend(struct usb_phy *x, int suspend) -{ - struct twl6030_usb *twl = phy_to_twl(x); - struct device *dev = twl->dev; - struct twl4030_usb_data *pdata = dev->platform_data; - - pdata->phy_suspend(dev, suspend); - - return 0; -} - -static int twl6030_start_srp(struct usb_otg *otg) -{ - struct twl6030_usb *twl = phy_to_twl(otg->phy); + struct twl6030_usb *twl = comparator_to_twl(comparator); twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); @@ -193,13 +153,6 @@ static int twl6030_start_srp(struct usb_otg *otg) static int twl6030_usb_ldo_init(struct twl6030_usb *twl) { - char *regulator_name; - - if (twl->features & TWL6025_SUBCLASS) - regulator_name = "ldousb"; - else - regulator_name = "vusb"; - /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); @@ -209,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl) /* Program MISC2 register and set bit VUSB_IN_VBAT */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); - twl->usb3v3 = regulator_get(twl->dev, regulator_name); + twl->usb3v3 = regulator_get(twl->dev, twl->regulator); if (IS_ERR(twl->usb3v3)) return -ENODEV; @@ -313,23 +266,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) return IRQ_HANDLED; } -static int twl6030_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - if (!otg) - return -ENODEV; - - otg->gadget = gadget; - if (!gadget) - otg->phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl6030_enable_irq(struct usb_phy *x) +static int twl6030_enable_irq(struct twl6030_usb *twl) { - struct twl6030_usb *twl = phy_to_twl(x); - twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); @@ -362,9 +300,9 @@ static void otg_set_vbus_work(struct work_struct *data) CHARGERUSB_CTRL1); } -static int twl6030_set_vbus(struct usb_otg *otg, bool enabled) +static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled) { - struct twl6030_usb *twl = phy_to_twl(otg->phy); + struct twl6030_usb *twl = comparator_to_twl(comparator); twl->vbus_enable = enabled; schedule_work(&twl->set_vbus_work); @@ -372,52 +310,44 @@ static int twl6030_set_vbus(struct usb_otg *otg, bool enabled) return 0; } -static int twl6030_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - otg->host = host; - if (!host) - otg->phy->state = OTG_STATE_UNDEFINED; - return 0; -} - static int __devinit twl6030_usb_probe(struct platform_device *pdev) { + u32 ret; struct twl6030_usb *twl; int status, err; - struct twl4030_usb_data *pdata; - struct usb_otg *otg; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct twl4030_usb_data *pdata = dev->platform_data; twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; - otg = devm_kzalloc(dev, sizeof *otg, GFP_KERNEL); - if (!otg) - return -ENOMEM; - twl->dev = &pdev->dev; twl->irq1 = platform_get_irq(pdev, 0); twl->irq2 = platform_get_irq(pdev, 1); - twl->features = pdata->features; twl->linkstat = OMAP_MUSB_UNKNOWN; - twl->phy.dev = twl->dev; - twl->phy.label = "twl6030"; - twl->phy.otg = otg; - twl->phy.init = twl6030_phy_init; - twl->phy.shutdown = twl6030_phy_shutdown; - twl->phy.set_suspend = twl6030_phy_suspend; + twl->comparator.set_vbus = twl6030_set_vbus; + twl->comparator.start_srp = twl6030_start_srp; + + ret = omap_usb2_set_comparator(&twl->comparator); + if (ret == -ENODEV) { + dev_info(&pdev->dev, "phy not ready, deferring probe"); + return -EPROBE_DEFER; + } - otg->phy = &twl->phy; - otg->set_host = twl6030_set_host; - otg->set_peripheral = twl6030_set_peripheral; - otg->set_vbus = twl6030_set_vbus; - otg->start_srp = twl6030_start_srp; + if (np) { + twl->regulator = "usb"; + } else if (pdata) { + if (pdata->features & TWL6025_SUBCLASS) + twl->regulator = "ldousb"; + else + twl->regulator = "vusb"; + } else { + dev_err(&pdev->dev, "twl6030 initialized without pdata\n"); + return -EINVAL; + } /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -427,7 +357,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) dev_err(&pdev->dev, "ldo init failed\n"); return err; } - usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2); platform_set_drvdata(pdev, twl); if (device_create_file(&pdev->dev, &dev_attr_vbus)) @@ -458,9 +387,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) } twl->asleep = 0; - pdata->phy_init(dev); - twl6030_phy_suspend(&twl->phy, 0); - twl6030_enable_irq(&twl->phy); + twl6030_enable_irq(twl); dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); return 0; @@ -470,10 +397,6 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev) { struct twl6030_usb *twl = platform_get_drvdata(pdev); - struct twl4030_usb_data *pdata; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; - twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, REG_INT_MSK_LINE_C); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, @@ -481,19 +404,27 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev) free_irq(twl->irq1, twl); free_irq(twl->irq2, twl); regulator_put(twl->usb3v3); - pdata->phy_exit(twl->dev); device_remove_file(twl->dev, &dev_attr_vbus); cancel_work_sync(&twl->set_vbus_work); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl6030_usb_id_table[] = { + { .compatible = "ti,twl6030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); +#endif + static struct platform_driver twl6030_usb_driver = { .probe = twl6030_usb_probe, .remove = __exit_p(twl6030_usb_remove), .driver = { .name = "twl6030_usb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl6030_usb_id_table), }, }; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index e7cf84f0751a..63c339b3e676 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,6 +4,15 @@ comment "USB Physical Layer drivers" depends on USB || USB_GADGET +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + select USB_OTG_UTILS + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET @@ -15,3 +24,11 @@ config USB_ISP1301 To compile this driver as a module, choose M here: the module will be called isp1301. + +config MV_U3D_PHY + bool "Marvell USB 3.0 PHY controller Driver" + depends on USB_MV_U3D + select USB_OTG_UTILS + help + Enable this to support Marvell USB 3.0 phy controller for Marvell + SoC. diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index eca095b1a890..b069f29f1225 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -4,4 +4,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +obj-$(CONFIG_OMAP_USB2) += omap-usb2.o obj-$(CONFIG_USB_ISP1301) += isp1301.o +obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o +obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c index b19f4932a037..18dbf7e37607 100644 --- a/drivers/usb/phy/isp1301.c +++ b/drivers/usb/phy/isp1301.c @@ -15,12 +15,6 @@ #define DRV_NAME "isp1301" -#define ISP1301_I2C_ADDR 0x2C - -static const unsigned short normal_i2c[] = { - ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END -}; - static const struct i2c_device_id isp1301_id[] = { { "isp1301", 0 }, { } diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c new file mode 100644 index 000000000000..9f1c5d3c60ec --- /dev/null +++ b/drivers/usb/phy/mv_u3d_phy.c @@ -0,0 +1,345 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/usb/otg.h> +#include <linux/platform_data/mv_usb.h> + +#include "mv_u3d_phy.h" + +/* + * struct mv_u3d_phy - transceiver driver state + * @phy: transceiver structure + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @base: usb phy register memory base + */ +struct mv_u3d_phy { + struct usb_phy phy; + struct mv_usb_platform_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *base; +}; + +static u32 mv_u3d_phy_read(void __iomem *base, u32 reg) +{ + void __iomem *addr, *data; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + return readl_relaxed(data); +} + +static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + u32 tmp; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + tmp = readl_relaxed(data); + tmp |= value; + writel_relaxed(tmp, data); +} + +static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + u32 tmp; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + tmp = readl_relaxed(data); + tmp &= ~value; + writel_relaxed(tmp, data); +} + +static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + writel_relaxed(value, data); +} + +void mv_u3d_phy_shutdown(struct usb_phy *phy) +{ + struct mv_u3d_phy *mv_u3d_phy; + void __iomem *base; + u32 val; + + mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); + base = mv_u3d_phy->base; + + /* Power down Reference Analog current, bit 15 + * Power down PLL, bit 14 + * Power down Receiver, bit 13 + * Power down Transmitter, bit 12 + * of USB3_POWER_PLL_CONTROL register + */ + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_PU); + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + + if (mv_u3d_phy->clk) + clk_disable(mv_u3d_phy->clk); +} + +static int mv_u3d_phy_init(struct usb_phy *phy) +{ + struct mv_u3d_phy *mv_u3d_phy; + void __iomem *base; + u32 val, count; + + /* enable usb3 phy */ + mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); + + if (mv_u3d_phy->clk) + clk_enable(mv_u3d_phy->clk); + + base = mv_u3d_phy->base; + + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK); + val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT; + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + udelay(100); + + mv_u3d_phy_write(base, USB3_RESET_CONTROL, + USB3_RESET_CONTROL_RESET_PIPE); + udelay(100); + + mv_u3d_phy_write(base, USB3_RESET_CONTROL, + USB3_RESET_CONTROL_RESET_PIPE + | USB3_RESET_CONTROL_RESET_PHY); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK + | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK); + val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT) + | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT); + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + udelay(100); + + mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL, + USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE); + val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK + | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK + | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK); + val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT) + | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT) + | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT)); + mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN1_SET0); + val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK; + val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT; + mv_u3d_phy_write(base, USB3_GEN1_SET0, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN2_SET0); + val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK + | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK + | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK); + val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT) + | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT) + | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT) + | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT)); + mv_u3d_phy_write(base, USB3_GEN2_SET0, val); + udelay(100); + + mv_u3d_phy_read(base, USB3_TX_EMPPH); + val &= ~(USB3_TX_EMPPH_AMP_MASK + | USB3_TX_EMPPH_EN_MASK + | USB3_TX_EMPPH_AMP_FORCE_MASK + | USB3_TX_EMPPH_PAR1_MASK + | USB3_TX_EMPPH_PAR2_MASK); + val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT) + | (1 << USB3_TX_EMPPH_EN_SHIFT) + | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT) + | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT) + | (1 << USB3_TX_EMPPH_PAR2_SHIFT)); + + mv_u3d_phy_write(base, USB3_TX_EMPPH, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN2_SET1); + val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK + | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK + | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK + | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK); + val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT)); + mv_u3d_phy_write(base, USB3_GEN2_SET1, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN); + val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK; + val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT; + mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC); + val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK; + val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT; + mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL); + val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK; + val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT; + mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE); + val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK + | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK + | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK); + val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT) + | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT)); + mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_TXDETRX); + val &= ~(USB3_TXDETRX_VTHSEL_MASK); + val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT; + mv_u3d_phy_write(base, USB3_TXDETRX, val); + udelay(100); + + dev_dbg(mv_u3d_phy->dev, "start calibration\n"); + +calstart: + /* Perform Manual Calibration */ + mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL, + 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT); + + mdelay(1); + + count = 0; + while (1) { + val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL); + if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT)) + break; + else if (count > 50) { + dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n"); + goto calstart; + } + count++; + mdelay(1); + } + + /* active PIPE interface */ + mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL, + 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE); + + return 0; +} + +static int __devinit mv_u3d_phy_probe(struct platform_device *pdev) +{ + struct mv_u3d_phy *mv_u3d_phy; + struct mv_usb_platform_data *pdata; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *phy_base; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing mem resource\n"); + return -ENODEV; + } + + phy_base = devm_request_and_ioremap(dev, res); + if (!phy_base) { + dev_err(dev, "%s: register mapping failed\n", __func__); + return -ENXIO; + } + + mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL); + if (!mv_u3d_phy) + return -ENOMEM; + + mv_u3d_phy->dev = &pdev->dev; + mv_u3d_phy->plat = pdata; + mv_u3d_phy->base = phy_base; + mv_u3d_phy->phy.dev = mv_u3d_phy->dev; + mv_u3d_phy->phy.label = "mv-u3d-phy"; + mv_u3d_phy->phy.init = mv_u3d_phy_init; + mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown; + + ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3); + if (ret) + goto err; + + if (!mv_u3d_phy->clk) + mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy"); + + platform_set_drvdata(pdev, mv_u3d_phy); + + dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n"); +err: + return ret; +} + +static int __exit mv_u3d_phy_remove(struct platform_device *pdev) +{ + struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev); + + usb_remove_phy(&mv_u3d_phy->phy); + + if (mv_u3d_phy->clk) { + clk_put(mv_u3d_phy->clk); + mv_u3d_phy->clk = NULL; + } + + return 0; +} + +static struct platform_driver mv_u3d_phy_driver = { + .probe = mv_u3d_phy_probe, + .remove = __devexit_p(mv_u3d_phy_remove), + .driver = { + .name = "mv-u3d-phy", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(mv_u3d_phy_driver); +MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller"); +MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mv-u3d-phy"); diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/mv_u3d_phy.h new file mode 100644 index 000000000000..2a658cb9a527 --- /dev/null +++ b/drivers/usb/phy/mv_u3d_phy.h @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __MV_U3D_PHY_H +#define __MV_U3D_PHY_H + +#define USB3_POWER_PLL_CONTROL 0x1 +#define USB3_KVCO_CALI_CONTROL 0x2 +#define USB3_IMPEDANCE_CALI_CTRL 0x3 +#define USB3_IMPEDANCE_TX_SSC 0x4 +#define USB3_SQUELCH_FFE 0x6 +#define USB3_GEN1_SET0 0xD +#define USB3_GEN2_SET0 0xF +#define USB3_GEN2_SET1 0x10 +#define USB3_DIGITAL_LOOPBACK_EN 0x23 +#define USB3_PHY_ISOLATION_MODE 0x26 +#define USB3_TXDETRX 0x48 +#define USB3_TX_EMPPH 0x5E +#define USB3_RESET_CONTROL 0x90 +#define USB3_PIPE_SM_CTRL 0x91 + +#define USB3_RESET_CONTROL_RESET_PIPE 0x1 +#define USB3_RESET_CONTROL_RESET_PHY 0x2 + +#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0) +#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0 +#define USB3_PLL_25MHZ 0x2 +#define USB3_PLL_26MHZ 0x5 +#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5) +#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5 +#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12) +#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12 +#define USB3_POWER_PLL_CONTROL_PU (0xF << 12) + +#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12) +#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12 +#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14 +#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15 + +#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF +#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0 +#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4) +#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4 +#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8) +#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8 + +#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15) +#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11 + +#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1) +#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1 +#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6 +#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7) +#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7 +#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11) +#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11 +#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15) +#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15 + +#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0) +#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0 +#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3) +#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3 +#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6) +#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6 +#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8) +#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8 + +#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10) +#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10 + +#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12) +#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12 + +#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0) +#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0 + +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0 +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4) +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4 +#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8) + +#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4) +#define USB3_TXDETRX_VTHSEL_SHIFT 4 + +#define USB3_TX_EMPPH_AMP_MASK (0xF << 0) +#define USB3_TX_EMPPH_AMP_SHIFT 0 +#define USB3_TX_EMPPH_EN_MASK (0x1 << 6) +#define USB3_TX_EMPPH_EN_SHIFT 6 +#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7) +#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7 +#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8) +#define USB3_TX_EMPPH_PAR1_SHIFT 8 +#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13) +#define USB3_TX_EMPPH_PAR2_SHIFT 13 + +#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15 + +#endif /* __MV_U3D_PHY_H */ diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c new file mode 100644 index 000000000000..15ab3d6f2e8c --- /dev/null +++ b/drivers/usb/phy/omap-usb2.c @@ -0,0 +1,271 @@ +/* + * omap-usb2.c - USB PHY, talking to musb controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/usb/omap_usb.h> +#include <linux/usb/phy_companion.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> + +/** + * omap_usb2_set_comparator - links the comparator present in the sytem with + * this phy + * @comparator - the companion phy(comparator) for this phy + * + * The phy companion driver should call this API passing the phy_companion + * filled with set_vbus and start_srp to be used by usb phy. + * + * For use by phy companion driver + */ +int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + struct omap_usb *phy; + struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(x)) + return -ENODEV; + + phy = phy_to_omapusb(x); + phy->comparator = comparator; + return 0; +} +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); + +/** + * omap_usb_phy_power - power on/off the phy using control module reg + * @phy: struct omap_usb * + * @on: 0 or 1, based on powering on or off the PHY + * + * XXX: Remove this function once control module driver gets merged + */ +static void omap_usb_phy_power(struct omap_usb *phy, int on) +{ + u32 val; + + if (on) { + val = readl(phy->control_dev); + if (val & PHY_PD) { + writel(~PHY_PD, phy->control_dev); + /* XXX: add proper documentation for this delay */ + mdelay(200); + } + } else { + writel(PHY_PD, phy->control_dev); + } +} + +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->set_vbus(phy->comparator, enabled); +} + +static int omap_usb_start_srp(struct usb_otg *otg) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->start_srp(phy->comparator); +} + +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct usb_phy *phy = otg->phy; + + otg->host = host; + if (!host) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct usb_phy *phy = otg->phy; + + otg->gadget = gadget; + if (!gadget) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb2_suspend(struct usb_phy *x, int suspend) +{ + u32 ret; + struct omap_usb *phy = phy_to_omapusb(x); + + if (suspend && !phy->is_suspended) { + omap_usb_phy_power(phy, 0); + pm_runtime_put_sync(phy->dev); + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + ret = pm_runtime_get_sync(phy->dev); + if (ret < 0) { + dev_err(phy->dev, "get_sync failed with err %d\n", + ret); + return ret; + } + omap_usb_phy_power(phy, 1); + phy->is_suspended = 0; + } + + return 0; +} + +static int __devinit omap_usb2_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct usb_otg *otg; + struct resource *res; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + return -ENOMEM; + } + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb2"; + phy->phy.set_suspend = omap_usb2_suspend; + phy->phy.otg = otg; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + phy->control_dev = devm_request_and_ioremap(&pdev->dev, res); + if (phy->control_dev == NULL) { + dev_err(&pdev->dev, "Failed to obtain io memory\n"); + return -ENXIO; + } + + phy->is_suspended = 1; + omap_usb_phy_power(phy, 0); + + otg->set_host = omap_usb_set_host; + otg->set_peripheral = omap_usb_set_peripheral; + otg->set_vbus = omap_usb_set_vbus; + otg->start_srp = omap_usb_start_srp; + otg->phy = &phy->phy; + + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + + return 0; +} + +static int __devexit omap_usb2_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + usb_remove_phy(&phy->phy); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb2_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + + return 0; +} + +static int omap_usb2_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->wkupclk); + if (ret < 0) + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + + return ret; +} + +static const struct dev_pm_ops omap_usb2_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb2_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb2_id_table[] = { + { .compatible = "ti,omap-usb2" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); +#endif + +static struct platform_driver omap_usb2_driver = { + .probe = omap_usb2_probe, + .remove = __devexit_p(omap_usb2_remove), + .driver = { + .name = "omap-usb2", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb2_id_table), + }, +}; + +module_platform_driver(omap_usb2_driver); + +MODULE_ALIAS("platform: omap_usb2"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB2 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c new file mode 100644 index 000000000000..987116f9efcd --- /dev/null +++ b/drivers/usb/phy/tegra_usb_phy.c @@ -0,0 +1,838 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Erik Gilling <konkers@google.com> + * Benoit Goby <benoit@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/resource.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <asm/mach-types.h> +#include <linux/usb/tegra_usb_phy.h> +#include <mach/iomap.h> + +#define ULPI_VIEWPORT 0x170 + +#define USB_PORTSC1 0x184 +#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26) +#define USB_PORTSC1_PHCD (1 << 23) +#define USB_PORTSC1_WKOC (1 << 22) +#define USB_PORTSC1_WKDS (1 << 21) +#define USB_PORTSC1_WKCN (1 << 20) +#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16) +#define USB_PORTSC1_PP (1 << 12) +#define USB_PORTSC1_SUSP (1 << 7) +#define USB_PORTSC1_PE (1 << 2) +#define USB_PORTSC1_CCS (1 << 0) + +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) +#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) +#define USB_SUSP_CLR (1 << 5) +#define USB_PHY_CLK_VALID (1 << 7) +#define UTMIP_RESET (1 << 11) +#define UHSIC_RESET (1 << 11) +#define UTMIP_PHY_ENABLE (1 << 12) +#define ULPI_PHY_ENABLE (1 << 13) +#define USB_SUSP_SET (1 << 14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB1_VBUS_SENSE_CTL_MASK (3 << 1) +#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ + (1 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) +#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) + +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) +#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) + +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD (1 << 0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD (1 << 24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) + +#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) + +#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) +#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) +#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) +#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) + +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD (1 << 11) +#define UTMIP_BIASPD (1 << 10) + +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) + +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) + +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J (1 << 19) +#define UTMIP_HS_DISCON_DISABLE (1 << 8) + +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE (1 << 26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) + +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) + +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) + +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG (1 << 0) + +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL (1 << 3) + +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) + +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) + +static DEFINE_SPINLOCK(utmip_pad_lock); +static int utmip_pad_count; + +struct tegra_xtal_freq { + int freq; + u8 enable_delay; + u8 stable_count; + u8 active_delay; + u8 xtal_freq_count; + u16 debounce; +}; + +static const struct tegra_xtal_freq tegra_freq_table[] = { + { + .freq = 12000000, + .enable_delay = 0x02, + .stable_count = 0x2F, + .active_delay = 0x04, + .xtal_freq_count = 0x76, + .debounce = 0x7530, + }, + { + .freq = 13000000, + .enable_delay = 0x02, + .stable_count = 0x33, + .active_delay = 0x05, + .xtal_freq_count = 0x7F, + .debounce = 0x7EF4, + }, + { + .freq = 19200000, + .enable_delay = 0x03, + .stable_count = 0x4B, + .active_delay = 0x06, + .xtal_freq_count = 0xBB, + .debounce = 0xBB80, + }, + { + .freq = 26000000, + .enable_delay = 0x04, + .stable_count = 0x66, + .active_delay = 0x09, + .xtal_freq_count = 0xFE, + .debounce = 0xFDE8, + }, +}; + +static struct tegra_utmip_config utmip_default[] = { + [0] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 1, + .xcvr_lsrslew = 1, + }, + [2] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 2, + .xcvr_lsrslew = 2, + }, +}; + +static inline bool phy_is_ulpi(struct tegra_usb_phy *phy) +{ + return (phy->instance == 1); +} + +static int utmip_pad_open(struct tegra_usb_phy *phy) +{ + phy->pad_clk = clk_get_sys("utmip-pad", NULL); + if (IS_ERR(phy->pad_clk)) { + pr_err("%s: can't get utmip pad clock\n", __func__); + return PTR_ERR(phy->pad_clk); + } + + if (phy->instance == 0) { + phy->pad_regs = phy->regs; + } else { + phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); + if (!phy->pad_regs) { + pr_err("%s: can't remap usb registers\n", __func__); + clk_put(phy->pad_clk); + return -ENOMEM; + } + } + return 0; +} + +static void utmip_pad_close(struct tegra_usb_phy *phy) +{ + if (phy->instance != 0) + iounmap(phy->pad_regs); + clk_put(phy->pad_clk); +} + +static void utmip_pad_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + clk_prepare_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (utmip_pad_count++ == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable_unprepare(phy->pad_clk); +} + +static int utmip_pad_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + if (!utmip_pad_count) { + pr_err("%s: utmip pad already powered off\n", __func__); + return -EINVAL; + } + + clk_prepare_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (--utmip_pad_count == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val |= UTMIP_OTGPD | UTMIP_BIASPD; + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable_unprepare(phy->pad_clk); + + return 0; +} + +static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) +{ + unsigned long timeout = 2000; + do { + if ((readl(reg) & mask) == result) + return 0; + udelay(1); + timeout--; + } while (timeout); + return -1; +} + +static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->instance == 0) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val |= USB_PORTSC1_PHCD; + writel(val, base + USB_PORTSC1); + } + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->instance == 0) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + } + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val &= ~USB_PORTSC1_PHCD; + writel(val, base + USB_PORTSC1); + } + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, + USB_PHY_CLK_VALID)) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static int utmi_phy_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_utmip_config *config = phy->config; + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->instance == 0) { + val = readl(base + USB1_LEGACY_CTRL); + val |= USB1_NO_LEGACY_MODE; + writel(val, base + USB1_LEGACY_CTRL); + } + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_FS_PREABMLE_J; + writel(val, base + UTMIP_TX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG0); + val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); + val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); + val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); + writel(val, base + UTMIP_HSRX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG1); + val &= ~UTMIP_HS_SYNC_START_DLY(~0); + val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); + writel(val, base + UTMIP_HSRX_CFG1); + + val = readl(base + UTMIP_DEBOUNCE_CFG0); + val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); + val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); + writel(val, base + UTMIP_DEBOUNCE_CFG0); + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; + writel(val, base + UTMIP_MISC_CFG0); + + val = readl(base + UTMIP_MISC_CFG1); + val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); + val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | + UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); + writel(val, base + UTMIP_MISC_CFG1); + + val = readl(base + UTMIP_PLL_CFG1); + val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); + val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | + UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); + writel(val, base + UTMIP_PLL_CFG1); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); + writel(val, base + USB_SUSP_CTRL); + } + + utmip_pad_power_on(phy); + + val = readl(base + UTMIP_XCVR_CFG0); + val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | + UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | + UTMIP_XCVR_HSSLEW_MSB(~0)); + val |= UTMIP_XCVR_SETUP(config->xcvr_setup); + val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); + val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); + val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); + writel(val, base + UTMIP_XCVR_CFG1); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val &= ~UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_BIAS_CFG1); + val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); + val |= UTMIP_BIAS_PDTRK_COUNT(0x5); + writel(val, base + UTMIP_BIAS_CFG1); + + if (phy->instance == 0) { + val = readl(base + UTMIP_SPARE_CFG0); + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) + val &= ~FUSE_SETUP_SEL; + else + val |= FUSE_SETUP_SEL; + writel(val, base + UTMIP_SPARE_CFG0); + } + + if (phy->instance == 2) { + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val &= ~UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->instance == 0) { + val = readl(base + USB1_LEGACY_CTRL); + val &= ~USB1_VBUS_SENSE_CTL_MASK; + val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; + writel(val, base + USB1_LEGACY_CTRL); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + utmi_phy_clk_enable(phy); + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val &= ~USB_PORTSC1_PTS(~0); + writel(val, base + USB_PORTSC1); + } + + return 0; +} + +static int utmi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + utmi_phy_clk_disable(phy); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); + val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val |= UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_XCVR_CFG0); + val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG1); + + return utmip_pad_power_off(phy); +} + +static void utmi_phy_preresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val |= UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_postresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); + if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; + else + val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; + writel(val, base + UTMIP_MISC_CFG0); + udelay(1); + + val = readl(base + UTMIP_MISC_CFG0); + val |= UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static void utmi_phy_restore_end(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static int ulpi_phy_power_on(struct tegra_usb_phy *phy) +{ + int ret; + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + gpio_direction_output(config->reset_gpio, 0); + msleep(5); + gpio_direction_output(config->reset_gpio, 1); + + clk_prepare_enable(phy->clk); + msleep(1); + + val = readl(base + USB_SUSP_CTRL); + val |= UHSIC_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + ULPI_TIMING_CTRL_0); + val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; + writel(val, base + ULPI_TIMING_CTRL_0); + + val = readl(base + USB_SUSP_CTRL); + val |= ULPI_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + + val = 0; + writel(val, base + ULPI_TIMING_CTRL_1); + + val |= ULPI_DATA_TRIMMER_SEL(4); + val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); + val |= ULPI_DIR_TRIMMER_SEL(4); + writel(val, base + ULPI_TIMING_CTRL_1); + udelay(10); + + val |= ULPI_DATA_TRIMMER_LOAD; + val |= ULPI_STPDIRNXT_TRIMMER_LOAD; + val |= ULPI_DIR_TRIMMER_LOAD; + writel(val, base + ULPI_TIMING_CTRL_1); + + /* Fix VbusInvalid due to floating VBUS */ + ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + val = readl(base + USB_PORTSC1); + val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN; + writel(val, base + USB_PORTSC1); + + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + udelay(100); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + return 0; +} + +static int ulpi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB + * Controller to immediately bring the ULPI PHY out of low power + */ + val = readl(base + USB_PORTSC1); + val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN); + writel(val, base + USB_PORTSC1); + + clk_disable(phy->clk); + return gpio_direction_output(config->reset_gpio, 0); +} + +static int tegra_phy_init(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_ulpi_config *ulpi_config; + int err; + + if (phy_is_ulpi(phy)) { + ulpi_config = phy->config; + phy->clk = clk_get_sys(NULL, ulpi_config->clk); + if (IS_ERR(phy->clk)) { + pr_err("%s: can't get ulpi clock\n", __func__); + err = -ENXIO; + goto err1; + } + if (!gpio_is_valid(ulpi_config->reset_gpio)) + ulpi_config->reset_gpio = + of_get_named_gpio(phy->dev->of_node, + "nvidia,phy-reset-gpio", 0); + if (!gpio_is_valid(ulpi_config->reset_gpio)) { + pr_err("%s: invalid reset gpio: %d\n", __func__, + ulpi_config->reset_gpio); + err = -EINVAL; + goto err1; + } + gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); + gpio_direction_output(ulpi_config->reset_gpio, 0); + phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); + phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; + } else { + err = utmip_pad_open(phy); + if (err < 0) + goto err1; + } + return 0; +err1: + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); + return err; +} + +static void tegra_usb_phy_close(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (phy_is_ulpi(phy)) + clk_put(phy->clk); + else + utmip_pad_close(phy); + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); + kfree(phy); +} + +static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + return ulpi_phy_power_on(phy); + else + return utmi_phy_power_on(phy); +} + +static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + return ulpi_phy_power_off(phy); + else + return utmi_phy_power_off(phy); +} + +static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + if (suspend) + return tegra_usb_phy_power_off(phy); + else + return tegra_usb_phy_power_on(phy); +} + +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) +{ + struct tegra_usb_phy *phy; + unsigned long parent_rate; + int i; + int err; + + phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); + if (!phy) + return ERR_PTR(-ENOMEM); + + phy->instance = instance; + phy->regs = regs; + phy->config = config; + phy->mode = phy_mode; + phy->dev = dev; + + if (!phy->config) { + if (phy_is_ulpi(phy)) { + pr_err("%s: ulpi phy configuration missing", __func__); + err = -EINVAL; + goto err0; + } else { + phy->config = &utmip_default[instance]; + } + } + + phy->pll_u = clk_get_sys(NULL, "pll_u"); + if (IS_ERR(phy->pll_u)) { + pr_err("Can't get pll_u clock\n"); + err = PTR_ERR(phy->pll_u); + goto err0; + } + clk_prepare_enable(phy->pll_u); + + parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); + for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { + if (tegra_freq_table[i].freq == parent_rate) { + phy->freq = &tegra_freq_table[i]; + break; + } + } + if (!phy->freq) { + pr_err("invalid pll_u parent rate %ld\n", parent_rate); + err = -EINVAL; + goto err1; + } + + phy->u_phy.init = tegra_phy_init; + phy->u_phy.shutdown = tegra_usb_phy_close; + phy->u_phy.set_suspend = tegra_usb_phy_suspend; + + return phy; + +err1: + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); +err0: + kfree(phy); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_open); + +void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_preresume(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); + +void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_postresume(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); + +void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_restore_start(phy, port_speed); +} +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); + +void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_restore_end(phy); +} +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); + +void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_clk_disable(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable); + +void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_clk_enable(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8c9bb1ad3069..072edc1cc55f 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -432,17 +432,16 @@ static int usbhs_probe(struct platform_device *pdev) } /* usb private data */ - priv = kzalloc(sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(&pdev->dev, "Could not allocate priv\n"); return -ENOMEM; } - priv->base = ioremap_nocache(res->start, resource_size(res)); + priv->base = devm_request_and_ioremap(&pdev->dev, res); if (!priv->base) { dev_err(&pdev->dev, "ioremap error.\n"); - ret = -ENOMEM; - goto probe_end_kfree; + return -ENOMEM; } /* @@ -485,7 +484,7 @@ static int usbhs_probe(struct platform_device *pdev) /* call pipe and module init */ ret = usbhs_pipe_probe(priv); if (ret < 0) - goto probe_end_iounmap; + return ret; ret = usbhs_fifo_probe(priv); if (ret < 0) @@ -546,10 +545,6 @@ probe_end_fifo_exit: usbhs_fifo_remove(priv); probe_end_pipe_exit: usbhs_pipe_remove(priv); -probe_end_iounmap: - iounmap(priv->base); -probe_end_kfree: - kfree(priv); dev_info(&pdev->dev, "probe failed\n"); @@ -576,8 +571,6 @@ static int __devexit usbhs_remove(struct platform_device *pdev) usbhs_mod_remove(priv); usbhs_fifo_remove(priv); usbhs_pipe_remove(priv); - iounmap(priv->base); - kfree(priv); return 0; } @@ -603,12 +596,12 @@ static int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - usbhs_platform_call(priv, phy_reset, pdev); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) usbhsc_power_ctrl(priv, 1); - usbhsc_hotplug(priv); + usbhs_platform_call(priv, phy_reset, pdev); + + usbhsc_drvcllbck_notify_hotplug(pdev); return 0; } diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index ecd173032fd4..143c4e9e1be4 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -818,7 +818,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_is_dcp(pipe)) goto usbhsf_pio_prepare_push; - if (len % 4) /* 32bit alignment */ + if (len & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ @@ -905,7 +905,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) /* use PIO if packet is less than pio_dma_border */ len = usbhsf_fifo_rcv_len(priv, fifo); len = min(pkt->length - pkt->actual, len); - if (len % 4) /* 32bit alignment */ + if (len & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop_unselect; if (len < usbhs_get_dparam(priv, pio_dma_border)) diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 82a628f96c03..35c5208f3249 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -209,14 +209,18 @@ int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state) return (int)irq_state->intsts0 & CTSQ_MASK; } -static void usbhs_status_get_each_irq(struct usbhs_priv *priv, - struct usbhs_irq_state *state) +static int usbhs_status_get_each_irq(struct usbhs_priv *priv, + struct usbhs_irq_state *state) { struct usbhs_mod *mod = usbhs_mod_get_current(priv); + u16 intenb0, intenb1; state->intsts0 = usbhs_read(priv, INTSTS0); state->intsts1 = usbhs_read(priv, INTSTS1); + intenb0 = usbhs_read(priv, INTENB0); + intenb1 = usbhs_read(priv, INTENB1); + /* mask */ if (mod) { state->brdysts = usbhs_read(priv, BRDYSTS); @@ -226,6 +230,20 @@ static void usbhs_status_get_each_irq(struct usbhs_priv *priv, state->bempsts &= mod->irq_bempsts; state->brdysts &= mod->irq_brdysts; } + + /* + * Check whether the irq enable registers and the irq status are set + * when IRQF_SHARED is set. + */ + if (priv->irqflags & IRQF_SHARED) { + if (!(intenb0 & state->intsts0) && + !(intenb1 & state->intsts1) && + !(state->bempsts) && + !(state->brdysts)) + return -EIO; + } + + return 0; } /* @@ -238,7 +256,8 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) struct usbhs_priv *priv = data; struct usbhs_irq_state irq_state; - usbhs_status_get_each_irq(priv, &irq_state); + if (usbhs_status_get_each_irq(priv, &irq_state) < 0) + return IRQ_NONE; /* * clear interrupt diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1834cf50888c..9b69a1323294 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1266,6 +1266,12 @@ static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, return ret; } +static int usbhsh_bus_nop(struct usb_hcd *hcd) +{ + /* nothing to do */ + return 0; +} + static struct hc_driver usbhsh_driver = { .description = usbhsh_hcd_name, .hcd_priv_size = sizeof(struct usbhsh_hpriv), @@ -1290,6 +1296,8 @@ static struct hc_driver usbhsh_driver = { */ .hub_status_data = usbhsh_hub_status_data, .hub_control = usbhsh_hub_control, + .bus_suspend = usbhsh_bus_nop, + .bus_resume = usbhsh_bus_nop, }; /* diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 325d2910f9f9..76f462241738 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -42,11 +42,6 @@ config USB_SERIAL_CONSOLE If unsure, say N. -config USB_EZUSB - bool "Functions for loading firmware on EZUSB chips" - help - Say Y here if you need EZUSB device support. - config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" help @@ -94,7 +89,7 @@ config USB_SERIAL_CH341 config USB_SERIAL_WHITEHEAT tristate "USB ConnectTech WhiteHEAT Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a ConnectTech WhiteHEAT 4 port USB to serial converter device. @@ -281,7 +276,7 @@ config USB_SERIAL_IUU config USB_SERIAL_KEYSPAN_PDA tristate "USB Keyspan PDA Single Port Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a Keyspan PDA single port USB to serial converter device. This driver makes use of firmware @@ -292,7 +287,7 @@ config USB_SERIAL_KEYSPAN_PDA config USB_SERIAL_KEYSPAN tristate "USB Keyspan USA-xxx Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 ---help--- Say Y here if you want to use Keyspan USB to serial converter devices. This driver makes use of Keyspan's official firmware @@ -596,7 +591,7 @@ config USB_SERIAL_CYBERJACK config USB_SERIAL_XIRCOM tristate "USB Xircom / Entregra Single Port Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a Xircom or Entregra single port USB to serial converter device. This driver makes use of firmware @@ -660,6 +655,14 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_ZTE + tristate "ZTE USB serial driver" + help + Say Y here if you want to use a ZTE USB to serial device. + + To compile this driver as a module, choose M here: the + module will be called zte. + config USB_SERIAL_SSU100 tristate "USB Quatech SSU-100 Single Port Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 1dc483a8bfc7..3b3e7308d476 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_USB_SERIAL) += usbserial.o usbserial-y := usb-serial.o generic.o bus.o usbserial-$(CONFIG_USB_SERIAL_CONSOLE) += console.o -usbserial-$(CONFIG_USB_EZUSB) += ezusb.o obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o @@ -63,3 +62,4 @@ obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o +obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index d634e6635632..54e1bb6372e7 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -52,8 +52,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - /* Vendor and Product ID */ #define AIRCABLE_VID 0x16CA #define AIRCABLE_USB_PID 0x1502 @@ -196,6 +194,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index f8ce97d8b0ad..cf2522c397d3 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -37,7 +37,6 @@ #include <linux/mutex.h> #include <linux/spinlock.h> -static bool debug; /* * Version information */ @@ -215,7 +214,7 @@ static void ark3116_release(struct usb_serial *serial) static void ark3116_init_termios(struct tty_struct *tty) { - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; *termios = tty_std_termios; termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; @@ -229,7 +228,7 @@ static void ark3116_set_termios(struct tty_struct *tty, { struct usb_serial *serial = port->serial; struct ark3116_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; int bps = tty_get_baud_rate(tty); int quot; @@ -650,8 +649,7 @@ static void ark3116_read_int_callback(struct urb *urb) /* * Not sure what this data meant... */ - usb_serial_debug_data(debug, &port->dev, - __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); break; @@ -750,9 +748,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debug"); - /* * The following describes what I learned from studying the old * ark3116.c driver, disassembling the windows driver, and some lucky diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6b7365632951..99449424193f 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -37,8 +37,6 @@ #include <linux/usb/serial.h> #include "belkin_sa.h" -static bool debug; - /* * Version Information */ @@ -206,8 +204,7 @@ static void belkin_sa_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); /* Handle known interrupt data */ /* ignore data[0] and data[1] */ @@ -307,7 +304,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty, unsigned long control_state; int bad_flow_control; speed_t baud; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; iflag = termios->c_iflag; cflag = termios->c_cflag; @@ -515,6 +512,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index f398d1e34474..c15f2e7cefc7 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -61,18 +61,23 @@ static int usb_serial_device_probe(struct device *dev) goto exit; } + /* make sure suspend/resume doesn't race against port_probe */ + retval = usb_autopm_get_interface(port->serial->interface); + if (retval) + goto exit; + driver = port->serial->type; if (driver->port_probe) { retval = driver->port_probe(port); if (retval) - goto exit; + goto exit_with_autopm; } retval = device_create_file(dev, &dev_attr_port_number); if (retval) { if (driver->port_remove) retval = driver->port_remove(port); - goto exit; + goto exit_with_autopm; } minor = port->number; @@ -81,6 +86,8 @@ static int usb_serial_device_probe(struct device *dev) "%s converter now attached to ttyUSB%d\n", driver->description, minor); +exit_with_autopm: + usb_autopm_put_interface(port->serial->interface); exit: return retval; } @@ -96,6 +103,9 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; + /* make sure suspend/resume doesn't race against port_remove */ + usb_autopm_get_interface(port->serial->interface); + device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; @@ -107,6 +117,7 @@ static int usb_serial_device_remove(struct device *dev) dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); + usb_autopm_put_interface(port->serial->interface); return retval; } diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index cabd1b15ddce..e9c7046ae355 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -70,8 +70,6 @@ #define CH341_NBREAK_BITS_REG2 0x40 -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, { USB_DEVICE(0x1a86, 0x7523) }, @@ -93,8 +91,9 @@ static int ch341_control_out(struct usb_device *dev, u8 request, u16 value, u16 index) { int r; - dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40, - (int)request, (int)value, (int)index); + + dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n", + USB_DIR_OUT|0x40, (int)request, (int)value, (int)index); r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, @@ -108,8 +107,10 @@ static int ch341_control_in(struct usb_device *dev, char *buf, unsigned bufsize) { int r; - dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40, - (int)request, (int)value, (int)index, buf, (int)bufsize); + + dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n", + USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf, + (int)bufsize); r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, @@ -320,7 +321,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) goto out; - dbg("%s - submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__); r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (r) { dev_err(&port->dev, "%s - failed submitting interrupt urb," @@ -390,19 +391,19 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) __func__, r); goto out; } - dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", - __func__, break_reg[0], break_reg[1]); + dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n", + __func__, break_reg[0], break_reg[1]); if (break_state != 0) { - dbg("%s - Enter break state requested", __func__); + dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__); break_reg[0] &= ~CH341_NBREAK_BITS_REG1; break_reg[1] &= ~CH341_NBREAK_BITS_REG2; } else { - dbg("%s - Leave break state requested", __func__); + dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__); break_reg[0] |= CH341_NBREAK_BITS_REG1; break_reg[1] |= CH341_NBREAK_BITS_REG2; } - dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", - __func__, break_reg[0], break_reg[1]); + dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n", + __func__, break_reg[0], break_reg[1]); reg_contents = get_unaligned_le16(break_reg); r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, ch341_break_reg, reg_contents); @@ -451,16 +452,16 @@ static void ch341_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); if (actual_length >= 4) { @@ -536,15 +537,16 @@ static int ch341_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd); switch (cmd) { case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); return wait_modem_info(port, arg); default: - dbg("%s not supported = 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); break; } @@ -572,7 +574,7 @@ static int ch341_tiocmget(struct tty_struct *tty) | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __func__, result); + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } @@ -617,6 +619,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index b9cca6dcde07..5f3bcd31e204 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -11,6 +11,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/slab.h> @@ -20,8 +22,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; - struct usbcons_info { int magic; int break_flag; @@ -68,8 +68,6 @@ static int usb_console_setup(struct console *co, char *options) struct tty_struct *tty = NULL; struct ktermios dummy; - dbg("%s", __func__); - if (options) { baud = simple_strtoul(options, NULL, 10); s = options; @@ -113,8 +111,7 @@ static int usb_console_setup(struct console *co, char *options) serial = usb_serial_get_by_index(co->index); if (serial == NULL) { /* no device is connected yet, sorry :( */ - printk(KERN_ERR "No USB device connected to ttyUSB%i\n", - co->index); + pr_err("No USB device connected to ttyUSB%i\n", co->index); return -ENODEV; } @@ -165,8 +162,8 @@ static int usb_console_setup(struct console *co, char *options) } if (serial->type->set_termios) { - tty->termios->c_cflag = cflag; - tty_termios_encode_baud_rate(tty->termios, baud, baud); + tty->termios.c_cflag = cflag; + tty_termios_encode_baud_rate(&tty->termios, baud, baud); memset(&dummy, 0, sizeof(struct ktermios)); serial->type->set_termios(tty, port, &dummy); @@ -213,10 +210,10 @@ static void usb_console_write(struct console *co, if (count == 0) return; - dbg("%s - port %d, %d byte(s)", __func__, port->number, count); + pr_debug("%s - port %d, %d byte(s)\n", __func__, port->number, count); if (!port->port.console) { - dbg("%s - port not opened", __func__); + pr_debug("%s - port not opened\n", __func__); return; } @@ -237,7 +234,7 @@ static void usb_console_write(struct console *co, retval = serial->type->write(NULL, port, buf, i); else retval = usb_serial_generic_write(NULL, port, buf, i); - dbg("%s - return value : %d", __func__, retval); + pr_debug("%s - return value : %d\n", __func__, retval); if (lf) { /* append CR after LF */ unsigned char cr = 13; @@ -247,7 +244,7 @@ static void usb_console_write(struct console *co, else retval = usb_serial_generic_write(NULL, port, &cr, 1); - dbg("%s - return value : %d", __func__, retval); + pr_debug("%s - return value : %d\n", __func__, retval); } buf += i; count -= i; @@ -284,10 +281,8 @@ void usb_serial_console_disconnect(struct usb_serial *serial) } } -void usb_serial_console_init(int serial_debug, int minor) +void usb_serial_console_init(int minor) { - debug = serial_debug; - if (minor == 0) { /* * Call register_console() if this is the first device plugged @@ -302,7 +297,7 @@ void usb_serial_console_init(int serial_debug, int minor) * register_console). console_write() is called immediately * from register_console iff CON_PRINTBUFFER is set in flags. */ - dbg("registering the USB serial console."); + pr_debug("registering the USB serial console.\n"); register_console(&usbcons); } } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 1e71079ce33b..28af5acc3360 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -52,8 +52,6 @@ static int cp210x_startup(struct usb_serial *); static void cp210x_release(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ @@ -304,9 +302,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, kfree(buf); if (result != size) { - dbg("%s - Unable to send config request, " - "request=0x%x size=%d result=%d", - __func__, request, size, result); + dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n", + __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -361,9 +358,8 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, kfree(buf); if ((size > 2 && result != size) || result < 0) { - dbg("%s - Unable to send request, " - "request=0x%x size=%d result=%d", - __func__, request, size, result); + dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n", + __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -469,7 +465,7 @@ static void cp210x_get_termios(struct tty_struct *tty, if (tty) { cp210x_get_termios_port(tty->driver_data, - &tty->termios->c_cflag, &baud); + &tty->termios.c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); } @@ -487,13 +483,14 @@ static void cp210x_get_termios(struct tty_struct *tty, static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp) { + struct device *dev = &port->dev; unsigned int cflag, modem_ctl[4]; unsigned int baud; unsigned int bits; cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); *baudp = baud; cflag = *cflagp; @@ -502,31 +499,30 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); cflag |= CS5; break; case BITS_DATA_6: - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); cflag |= CS6; break; case BITS_DATA_7: - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); cflag |= CS7; break; case BITS_DATA_8: - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); cflag |= CS8; break; case BITS_DATA_9: - dbg("%s - data bits = 9 (not supported, using 8 data bits)", - __func__); + dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: - dbg("%s - Unknown number of data bits, using 8", __func__); + dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; @@ -536,29 +532,29 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, switch (bits & BITS_PARITY_MASK) { case BITS_PARITY_NONE: - dbg("%s - parity = NONE", __func__); + dev_dbg(dev, "%s - parity = NONE\n", __func__); cflag &= ~PARENB; break; case BITS_PARITY_ODD: - dbg("%s - parity = ODD", __func__); + dev_dbg(dev, "%s - parity = ODD\n", __func__); cflag |= (PARENB|PARODD); break; case BITS_PARITY_EVEN: - dbg("%s - parity = EVEN", __func__); + dev_dbg(dev, "%s - parity = EVEN\n", __func__); cflag &= ~PARODD; cflag |= PARENB; break; case BITS_PARITY_MARK: - dbg("%s - parity = MARK", __func__); + dev_dbg(dev, "%s - parity = MARK\n", __func__); cflag |= (PARENB|PARODD|CMSPAR); break; case BITS_PARITY_SPACE: - dbg("%s - parity = SPACE", __func__); + dev_dbg(dev, "%s - parity = SPACE\n", __func__); cflag &= ~PARODD; cflag |= (PARENB|CMSPAR); break; default: - dbg("%s - Unknown parity mode, disabling parity", __func__); + dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); @@ -568,21 +564,19 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag &= ~CSTOPB; switch (bits & BITS_STOP_MASK) { case BITS_STOP_1: - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); break; case BITS_STOP_1_5: - dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", - __func__); + dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__); bits &= ~BITS_STOP_MASK; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); cflag |= CSTOPB; break; default: - dbg("%s - Unknown number of stop bits, using 1 stop bit", - __func__); + dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__); bits &= ~BITS_STOP_MASK; cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; @@ -590,10 +584,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { - dbg("%s - flow control = CRTSCTS", __func__); + dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); cflag |= CRTSCTS; } else { - dbg("%s - flow control = NONE", __func__); + dev_dbg(dev, "%s - flow control = NONE\n", __func__); cflag &= ~CRTSCTS; } @@ -631,7 +625,7 @@ static void cp210x_change_speed(struct tty_struct *tty, { u32 baud; - baud = tty->termios->c_ospeed; + baud = tty->termios.c_ospeed; /* This maps the requested rate to a rate valid on cp2102 or cp2103, * or to an arbitrary rate in [1M,2M]. @@ -640,7 +634,7 @@ static void cp210x_change_speed(struct tty_struct *tty, */ baud = cp210x_quantise_baudrate(baud); - dbg("%s - setting baud rate to %u", __func__, baud); + dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud); if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, sizeof(baud))) { dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); @@ -656,19 +650,20 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { + struct device *dev = &port->dev; unsigned int cflag, old_cflag; unsigned int bits; unsigned int modem_ctl[4]; - dbg("%s - port %d", __func__, port->number); + dev_dbg(dev, "%s - port %d\n", __func__, port->number); if (!tty) return; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; old_cflag = old_termios->c_cflag; - if (tty->termios->c_ospeed != old_termios->c_ospeed) + if (tty->termios.c_ospeed != old_termios->c_ospeed) cp210x_change_speed(tty, port, old_termios); /* If the number of data bits is to be updated */ @@ -678,34 +673,31 @@ static void cp210x_set_termios(struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: bits |= BITS_DATA_5; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: bits |= BITS_DATA_6; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: bits |= BITS_DATA_7; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; case CS8: bits |= BITS_DATA_8; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; /*case CS9: bits |= BITS_DATA_9; - dbg("%s - data bits = 9", __func__); + dev_dbg(dev, "%s - data bits = 9\n", __func__); break;*/ default: - dbg("cp210x driver does not " - "support the number of bits requested," - " using 8 bit mode"); + dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n"); bits |= BITS_DATA_8; break; } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Number of data bits requested " - "not supported by device"); + dev_dbg(dev, "Number of data bits requested not supported by device\n"); } if ((cflag & (PARENB|PARODD|CMSPAR)) != @@ -714,25 +706,25 @@ static void cp210x_set_termios(struct tty_struct *tty, bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & CMSPAR) { - if (cflag & PARODD) { - bits |= BITS_PARITY_MARK; - dbg("%s - parity = MARK", __func__); - } else { - bits |= BITS_PARITY_SPACE; - dbg("%s - parity = SPACE", __func__); - } + if (cflag & PARODD) { + bits |= BITS_PARITY_MARK; + dev_dbg(dev, "%s - parity = MARK\n", __func__); + } else { + bits |= BITS_PARITY_SPACE; + dev_dbg(dev, "%s - parity = SPACE\n", __func__); + } } else { - if (cflag & PARODD) { - bits |= BITS_PARITY_ODD; - dbg("%s - parity = ODD", __func__); - } else { - bits |= BITS_PARITY_EVEN; - dbg("%s - parity = EVEN", __func__); - } + if (cflag & PARODD) { + bits |= BITS_PARITY_ODD; + dev_dbg(dev, "%s - parity = ODD\n", __func__); + } else { + bits |= BITS_PARITY_EVEN; + dev_dbg(dev, "%s - parity = EVEN\n", __func__); + } } } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Parity mode not supported by device"); + dev_dbg(dev, "Parity mode not supported by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { @@ -740,37 +732,36 @@ static void cp210x_set_termios(struct tty_struct *tty, bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { bits |= BITS_STOP_1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Number of stop bits requested " - "not supported by device"); + dev_dbg(dev, "Number of stop bits requested not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); - dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); + dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); if (cflag & CRTSCTS) { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x09; modem_ctl[1] = 0x80; - dbg("%s - flow control = CRTSCTS", __func__); + dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; modem_ctl[1] |= 0x40; - dbg("%s - flow control = NONE", __func__); + dev_dbg(dev, "%s - flow control = NONE\n", __func__); } - dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); + dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } @@ -805,7 +796,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, control |= CONTROL_WRITE_DTR; } - dbg("%s - control = 0x%.4x", __func__, control); + dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control); return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } @@ -833,7 +824,7 @@ static int cp210x_tiocmget (struct tty_struct *tty) |((control & CONTROL_RING)? TIOCM_RI : 0) |((control & CONTROL_DCD) ? TIOCM_CD : 0); - dbg("%s - control = 0x%.2x", __func__, control); + dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control); return result; } @@ -847,8 +838,8 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __func__, - state == BREAK_OFF ? "off" : "on"); + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, + state == BREAK_OFF ? "off" : "on"); cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); } @@ -865,7 +856,6 @@ static int cp210x_startup(struct usb_serial *serial) if (!port_priv) return -ENOMEM; - memset(port_priv, 0x00, sizeof(*port_priv)); port_priv->bInterfaceNumber = serial->interface->cur_altsetting->desc.bInterfaceNumber; @@ -892,6 +882,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable verbose debugging messages"); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 3aa0b530f68e..2a7aecc72237 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -43,8 +43,6 @@ #define CYBERJACK_LOCAL_BUF_SIZE 32 -static bool debug; - /* * Version Information */ @@ -136,7 +134,8 @@ static int cyberjack_startup(struct usb_serial *serial) if (result) dev_err(&serial->dev->dev, "usb_submit_urb(read int) failed\n"); - dbg("%s - usb_submit_urb(int urb)", __func__); + dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n", + __func__); } return 0; @@ -167,7 +166,7 @@ static int cyberjack_open(struct tty_struct *tty, unsigned long flags; int result = 0; - dbg("%s - usb_clear_halt", __func__); + dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); priv = usb_get_serial_port_data(port); @@ -192,18 +191,19 @@ static void cyberjack_close(struct usb_serial_port *port) static int cyberjack_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { + struct device *dev = &port->dev; struct cyberjack_private *priv = usb_get_serial_port_data(port); unsigned long flags; int result; int wrexpected; if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(dev, "%s - write request of 0 bytes\n", __func__); return 0; } if (!test_and_clear_bit(0, &port->write_urbs_free)) { - dbg("%s - already writing", __func__); + dev_dbg(dev, "%s - already writing\n", __func__); return 0; } @@ -220,13 +220,12 @@ static int cyberjack_write(struct tty_struct *tty, /* Copy data */ memcpy(priv->wrbuf + priv->wrfilled, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, - priv->wrbuf + priv->wrfilled); + usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled); priv->wrfilled += count; if (priv->wrfilled >= 3) { wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; - dbg("%s - expected data: %d", __func__, wrexpected); + dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected); } else wrexpected = sizeof(priv->wrbuf); @@ -234,7 +233,7 @@ static int cyberjack_write(struct tty_struct *tty, /* We have enough data to begin transmission */ int length; - dbg("%s - transmitting data (frame 1)", __func__); + dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__); length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected; @@ -258,11 +257,11 @@ static int cyberjack_write(struct tty_struct *tty, return 0; } - dbg("%s - priv->wrsent=%d", __func__, priv->wrsent); - dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled); + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); if (priv->wrsent >= priv->wrfilled) { - dbg("%s - buffer cleaned", __func__); + dev_dbg(dev, "%s - buffer cleaned\n", __func__); memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); priv->wrfilled = 0; priv->wrsent = 0; @@ -284,6 +283,7 @@ static void cyberjack_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned char *data = urb->transfer_buffer; int status = urb->status; int result; @@ -292,8 +292,7 @@ static void cyberjack_read_int_callback(struct urb *urb) if (status) return; - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(dev, __func__, urb->actual_length, data); /* React only to interrupts signaling a bulk_in transfer */ if (urb->actual_length == 4 && data[0] == 0x01) { @@ -307,7 +306,7 @@ static void cyberjack_read_int_callback(struct urb *urb) old_rdtodo = priv->rdtodo; if (old_rdtodo + size < old_rdtodo) { - dbg("To many bulk_in urbs to do."); + dev_dbg(dev, "To many bulk_in urbs to do.\n"); spin_unlock(&priv->lock); goto resubmit; } @@ -315,17 +314,16 @@ static void cyberjack_read_int_callback(struct urb *urb) /* "+=" is probably more fault tollerant than "=" */ priv->rdtodo += size; - dbg("%s - rdtodo: %d", __func__, priv->rdtodo); + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo); spin_unlock(&priv->lock); if (!old_rdtodo) { result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting " - "read urb, error %d\n", + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); - dbg("%s - usb_submit_urb(read urb)", __func__); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); } } @@ -333,30 +331,30 @@ resubmit: result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); - dbg("%s - usb_submit_urb(int urb)", __func__); + dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__); } static void cyberjack_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; short todo; int result; int status = urb->status; - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(dev, __func__, urb->actual_length, data); if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); + dev_dbg(dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); return; } tty = tty_port_tty_get(&port->port); if (!tty) { - dbg("%s - ignoring since device not open", __func__); + dev_dbg(dev, "%s - ignoring since device not open\n", __func__); return; } if (urb->actual_length) { @@ -376,15 +374,15 @@ static void cyberjack_read_bulk_callback(struct urb *urb) spin_unlock(&priv->lock); - dbg("%s - rdtodo: %d", __func__, todo); + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo); /* Continue to read if we have still urbs to do. */ if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) { result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read " - "urb, error %d\n", __func__, result); - dbg("%s - usb_submit_urb(read urb)", __func__); + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); } } @@ -392,12 +390,13 @@ static void cyberjack_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; int status = urb->status; set_bit(0, &port->write_urbs_free); if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); return; } @@ -407,7 +406,7 @@ static void cyberjack_write_bulk_callback(struct urb *urb) if (priv->wrfilled) { int length, blksize, result; - dbg("%s - transmitting data (frame n)", __func__); + dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__); length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? port->bulk_out_size : (priv->wrfilled - priv->wrsent); @@ -422,8 +421,7 @@ static void cyberjack_write_bulk_callback(struct urb *urb) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, - "%s - failed submitting write urb, error %d\n", + dev_err(dev, "%s - failed submitting write urb, error %d\n", __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; @@ -431,14 +429,14 @@ static void cyberjack_write_bulk_callback(struct urb *urb) goto exit; } - dbg("%s - priv->wrsent=%d", __func__, priv->wrsent); - dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled); + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; if (priv->wrsent >= priv->wrfilled || priv->wrsent >= blksize) { - dbg("%s - buffer cleaned", __func__); + dev_dbg(dev, "%s - buffer cleaned\n", __func__); memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); priv->wrfilled = 0; priv->wrsent = 0; @@ -456,6 +454,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b78c34eb5d3f..1befce21e173 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -46,7 +46,6 @@ #include "cypress_m8.h" -static bool debug; static bool stats; static int interval; static bool unstable_bauds; @@ -263,8 +262,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) * safest speed for a part like that. */ if (new_rate > 4800) { - dbg("%s - failed setting baud rate, device incapable " - "speed %d", __func__, new_rate); + dev_dbg(&port->dev, + "%s - failed setting baud rate, device incapable speed %d\n", + __func__, new_rate); return -1; } } @@ -274,8 +274,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) /* 300 and 600 baud rates are supported under * the generic firmware, but are not used with * NMEA and SiRF protocols */ - dbg("%s - failed setting baud rate, unsupported speed " - "of %d on Earthmate GPS", __func__, new_rate); + dev_dbg(&port->dev, + "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS", + __func__, new_rate); return -1; } break; @@ -294,6 +295,7 @@ static int cypress_serial_control(struct tty_struct *tty, { int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; + struct device *dev = &port->dev; u8 *feature_buffer; const unsigned int feature_len = 5; unsigned long flags; @@ -312,16 +314,16 @@ static int cypress_serial_control(struct tty_struct *tty, /* 0 means 'Hang up' so doesn't change the true bit rate */ new_baudrate = priv->baud_rate; if (baud_rate && baud_rate != priv->baud_rate) { - dbg("%s - baud rate is changing", __func__); + dev_dbg(dev, "%s - baud rate is changing\n", __func__); retval = analyze_baud_rate(port, baud_rate); if (retval >= 0) { new_baudrate = retval; - dbg("%s - New baud rate set to %d", - __func__, new_baudrate); + dev_dbg(dev, "%s - New baud rate set to %d\n", + __func__, new_baudrate); } } - dbg("%s - baud rate is being sent as %d", - __func__, new_baudrate); + dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__, + new_baudrate); /* fill the feature_buffer with new configuration */ put_unaligned_le32(new_baudrate, feature_buffer); @@ -333,9 +335,8 @@ static int cypress_serial_control(struct tty_struct *tty, /* 1 bit gap */ feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ - dbg("%s - device is being sent this feature report:", - __func__); - dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, + dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__); + dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__, feature_buffer[0], feature_buffer[1], feature_buffer[2], feature_buffer[3], feature_buffer[4]); @@ -355,8 +356,8 @@ static int cypress_serial_control(struct tty_struct *tty, retval != -ENODEV); if (retval != feature_len) { - dev_err(&port->dev, "%s - failed sending serial " - "line settings - %d\n", __func__, retval); + dev_err(dev, "%s - failed sending serial line settings - %d\n", + __func__, retval); cypress_set_dead(port); } else { spin_lock_irqsave(&priv->lock, flags); @@ -377,7 +378,7 @@ static int cypress_serial_control(struct tty_struct *tty, retval = -ENOTTY; goto out; } - dbg("%s - retreiving serial line settings", __func__); + dev_dbg(dev, "%s - retreiving serial line settings\n", __func__); do { retval = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), @@ -392,8 +393,8 @@ static int cypress_serial_control(struct tty_struct *tty, && retval != -ENODEV); if (retval != feature_len) { - dev_err(&port->dev, "%s - failed to retrieve serial " - "line settings - %d\n", __func__, retval); + dev_err(dev, "%s - failed to retrieve serial line settings - %d\n", + __func__, retval); cypress_set_dead(port); goto out; } else { @@ -474,14 +475,14 @@ static int generic_startup(struct usb_serial *serial) if (interval > 0) { priv->write_urb_interval = interval; priv->read_urb_interval = interval; - dbg("%s - port %d read & write intervals forced to %d", - __func__, port->number, interval); + dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n", + __func__, interval); } else { priv->write_urb_interval = port->interrupt_out_urb->interval; priv->read_urb_interval = port->interrupt_in_urb->interval; - dbg("%s - port %d intervals: read=%d write=%d", - __func__, port->number, - priv->read_urb_interval, priv->write_urb_interval); + dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n", + __func__, priv->read_urb_interval, + priv->write_urb_interval); } usb_set_serial_port_data(port, priv); @@ -495,8 +496,7 @@ static int cypress_earthmate_startup(struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __func__, - port->number); + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return 1; } @@ -511,8 +511,9 @@ static int cypress_earthmate_startup(struct usb_serial *serial) handle GET_CONFIG requests; everything they've produced since that time crashes if this command is attempted :-( */ - dbg("%s - Marking this device as unsafe for GET_CONFIG " - "commands", __func__); + dev_dbg(&port->dev, + "%s - Marking this device as unsafe for GET_CONFIG commands\n", + __func__); priv->get_cfg_unsafe = !0; } @@ -523,14 +524,14 @@ static int cypress_earthmate_startup(struct usb_serial *serial) static int cypress_hidcom_startup(struct usb_serial *serial) { struct cypress_private *priv; + struct usb_serial_port *port = serial->port[0]; if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __func__, - serial->port[0]->number); + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return 1; } - priv = usb_get_serial_port_data(serial->port[0]); + priv = usb_get_serial_port_data(port); priv->chiptype = CT_CYPHIDCOM; return 0; @@ -540,14 +541,14 @@ static int cypress_hidcom_startup(struct usb_serial *serial) static int cypress_ca42v2_startup(struct usb_serial *serial) { struct cypress_private *priv; + struct usb_serial_port *port = serial->port[0]; if (generic_startup(serial)) { - dbg("%s - Failed setting up port %d", __func__, - serial->port[0]->number); + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return 1; } - priv = usb_get_serial_port_data(serial->port[0]); + priv = usb_get_serial_port_data(port); priv->chiptype = CT_CA42V2; return 0; @@ -649,7 +650,7 @@ static void cypress_close(struct usb_serial_port *port) kfifo_reset_out(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - stopping urbs", __func__); + dev_dbg(&port->dev, "%s - stopping urbs\n", __func__); usb_kill_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_out_urb); @@ -665,7 +666,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, { struct cypress_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d, %d bytes", __func__, port->number, count); + dev_dbg(&port->dev, "%s - port %d, %d bytes\n", __func__, port->number, count); /* line control commands, which need to be executed immediately, are not put into the buffer for obvious reasons. @@ -691,17 +692,18 @@ static void cypress_send(struct usb_serial_port *port) { int count = 0, result, offset, actual_size; struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned long flags; if (!priv->comm_is_ok) return; - dbg("%s - interrupt out size is %d", __func__, - port->interrupt_out_size); + dev_dbg(dev, "%s - interrupt out size is %d\n", __func__, + port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); if (priv->write_urb_in_use) { - dbg("%s - can't write, urb in use", __func__); + dev_dbg(dev, "%s - can't write, urb in use\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); return; } @@ -731,7 +733,7 @@ static void cypress_send(struct usb_serial_port *port) if (priv->cmd_ctrl) { priv->cmd_count++; - dbg("%s - line control command being issued", __func__); + dev_dbg(dev, "%s - line control command being issued\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto send; } else @@ -753,7 +755,7 @@ static void cypress_send(struct usb_serial_port *port) port->interrupt_out_buffer[0] |= count; } - dbg("%s - count is %d", __func__, count); + dev_dbg(dev, "%s - count is %d\n", __func__, count); send: spin_lock_irqsave(&priv->lock, flags); @@ -766,9 +768,8 @@ send: actual_size = count + (priv->pkt_fmt == packet_format_1 ? 2 : 1); - usb_serial_debug_data(debug, &port->dev, __func__, - port->interrupt_out_size, - port->interrupt_out_urb->transfer_buffer); + usb_serial_debug_data(dev, __func__, port->interrupt_out_size, + port->interrupt_out_urb->transfer_buffer); usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), @@ -807,7 +808,7 @@ static int cypress_write_room(struct tty_struct *tty) room = kfifo_avail(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -832,7 +833,7 @@ static int cypress_tiocmget(struct tty_struct *tty) | ((status & UART_RI) ? TIOCM_RI : 0) | ((status & UART_CD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __func__, result); + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } @@ -867,7 +868,7 @@ static int cypress_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd); switch (cmd) { /* This code comes from drivers/char/serial.c and ftdi_sio.c */ @@ -902,7 +903,7 @@ static int cypress_ioctl(struct tty_struct *tty, default: break; } - dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd); + dev_dbg(&port->dev, "%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h\n", __func__, cmd); return -ENOIOCTLCMD; } /* cypress_ioctl */ @@ -911,6 +912,7 @@ static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; int data_bits, stop_bits, parity_type, parity_enable; unsigned cflag, iflag; unsigned long flags; @@ -922,38 +924,38 @@ static void cypress_set_termios(struct tty_struct *tty, early enough */ if (!priv->termios_initialized) { if (priv->chiptype == CT_EARTHMATE) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | + tty->termios = tty_std_termios; + tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 4800; - tty->termios->c_ospeed = 4800; + tty->termios.c_ispeed = 4800; + tty->termios.c_ospeed = 4800; } else if (priv->chiptype == CT_CYPHIDCOM) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | + tty->termios = tty_std_termios; + tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; } else if (priv->chiptype == CT_CA42V2) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | + tty->termios = tty_std_termios; + tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; } priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); /* Unsupported features need clearing */ - tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS); + tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS); - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* check if there are new settings */ if (old_termios) { spin_lock_irqsave(&priv->lock, flags); - priv->tmp_termios = *(tty->termios); + priv->tmp_termios = tty->termios; spin_unlock_irqrestore(&priv->lock, flags); } @@ -984,23 +986,21 @@ static void cypress_set_termios(struct tty_struct *tty, data_bits = 3; break; default: - dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n", - __func__); + dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__); data_bits = 3; } spin_lock_irqsave(&priv->lock, flags); oldlines = priv->line_control; if ((cflag & CBAUD) == B0) { /* drop dtr and rts */ - dbg("%s - dropping the lines, baud rate 0bps", __func__); + dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__); priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); } else priv->line_control = (CONTROL_DTR | CONTROL_RTS); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, " - "%d data_bits (+5)", __func__, stop_bits, - parity_enable, parity_type, data_bits); + dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n", + __func__, stop_bits, parity_enable, parity_type, data_bits); cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits, @@ -1017,11 +1017,10 @@ static void cypress_set_termios(struct tty_struct *tty, spin_lock_irqsave(&priv->lock, flags); if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) { - dbg("Using custom termios settings for a baud rate of " - "4800bps."); + dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n"); /* define custom termios settings for NMEA protocol */ - tty->termios->c_iflag /* input modes - */ + tty->termios.c_iflag /* input modes - */ &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ | PARMRK /* disable mark parity errors */ @@ -1031,10 +1030,10 @@ static void cypress_set_termios(struct tty_struct *tty, | ICRNL /* disable translate CR to NL */ | IXON); /* disable enable XON/XOFF flow control */ - tty->termios->c_oflag /* output modes */ + tty->termios.c_oflag /* output modes */ &= ~OPOST; /* disable postprocess output char */ - tty->termios->c_lflag /* line discipline modes */ + tty->termios.c_lflag /* line discipline modes */ &= ~(ECHO /* disable echo input characters */ | ECHONL /* disable echo new line */ | ICANON /* disable erase, kill, werase, and rprnt @@ -1067,7 +1066,7 @@ static int cypress_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1112,6 +1111,7 @@ static void cypress_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; @@ -1135,16 +1135,15 @@ static void cypress_read_int_callback(struct urb *urb) /* FALLS THROUGH */ default: /* something ugly is going on... */ - dev_err(&urb->dev->dev, - "%s - unexpected nonzero read status received: %d\n", - __func__, status); + dev_err(dev, "%s - unexpected nonzero read status received: %d\n", + __func__, status); cypress_set_dead(port); return; } spin_lock_irqsave(&priv->lock, flags); if (priv->rx_flags & THROTTLED) { - dbg("%s - now throttling", __func__); + dev_dbg(dev, "%s - now throttling\n", __func__); priv->rx_flags |= ACTUALLY_THROTTLED; spin_unlock_irqrestore(&priv->lock, flags); return; @@ -1153,7 +1152,7 @@ static void cypress_read_int_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (!tty) { - dbg("%s - bad tty pointer - exiting", __func__); + dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__); return; } @@ -1180,13 +1179,13 @@ static void cypress_read_int_callback(struct urb *urb) } spin_unlock_irqrestore(&priv->lock, flags); if (result < bytes) { - dbg("%s - wrong packet size - received %d bytes but packet " - "said %d bytes", __func__, result, bytes); + dev_dbg(dev, + "%s - wrong packet size - received %d bytes but packet said %d bytes\n", + __func__, result, bytes); goto continue_read; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); spin_lock_irqsave(&priv->lock, flags); /* check to see if status has changed */ @@ -1200,9 +1199,9 @@ static void cypress_read_int_callback(struct urb *urb) /* hangup, as defined in acm.c... this might be a bad place for it * though */ - if (tty && !(tty->termios->c_cflag & CLOCAL) && + if (tty && !(tty->termios.c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) { - dbg("%s - calling hangup", __func__); + dev_dbg(dev, "%s - calling hangup\n", __func__); tty_hangup(tty); goto continue_read; } @@ -1215,7 +1214,7 @@ static void cypress_read_int_callback(struct urb *urb) if (priv->current_status & CYP_ERROR) { spin_unlock_irqrestore(&priv->lock, flags); tty_flag = TTY_PARITY; - dbg("%s - Parity Error detected", __func__); + dev_dbg(dev, "%s - Parity Error detected\n", __func__); } else spin_unlock_irqrestore(&priv->lock, flags); @@ -1246,9 +1245,8 @@ continue_read: priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result && result != -EPERM) { - dev_err(&urb->dev->dev, "%s - failed resubmitting " - "read urb, error %d\n", __func__, - result); + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); cypress_set_dead(port); } } @@ -1259,6 +1257,7 @@ static void cypress_write_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; int result; int status = urb->status; @@ -1270,8 +1269,8 @@ static void cypress_write_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); priv->write_urb_in_use = 0; return; case -EPIPE: /* no break needed; clear halt and resubmit */ @@ -1279,21 +1278,19 @@ static void cypress_write_int_callback(struct urb *urb) break; usb_clear_halt(port->serial->dev, 0x02); /* error in the urb, so we have to resubmit it */ - dbg("%s - nonzero write bulk status received: %d", + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", __func__, status); port->interrupt_out_urb->transfer_buffer_length = 1; result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (!result) return; - dev_err(&urb->dev->dev, - "%s - failed resubmitting write urb, error %d\n", - __func__, result); + dev_err(dev, "%s - failed resubmitting write urb, error %d\n", + __func__, result); cypress_set_dead(port); break; default: - dev_err(&urb->dev->dev, - "%s - unexpected nonzero write status received: %d\n", - __func__, status); + dev_err(dev, "%s - unexpected nonzero write status received: %d\n", + __func__, status); cypress_set_dead(port); break; } @@ -1310,8 +1307,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(stats, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(stats, "Enable statistics or not"); module_param(interval, int, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b5cd838093ef..c86f68c6b078 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -249,10 +249,6 @@ static int digi_read_inb_callback(struct urb *urb); static int digi_read_oob_callback(struct urb *urb); -/* Statics */ - -static bool debug; - static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, @@ -404,14 +400,15 @@ static void digi_wakeup_write(struct usb_serial_port *port) static int digi_write_oob_command(struct usb_serial_port *port, unsigned char *buf, int count, int interruptible) { - int ret = 0; int len; struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); unsigned long flags = 0; - dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count); + dev_dbg(&port->dev, + "digi_write_oob_command: TOP: port=%d, count=%d\n", + oob_priv->dp_port_num, count); spin_lock_irqsave(&oob_priv->dp_port_lock, flags); while (count > 0) { @@ -467,7 +464,7 @@ static int digi_write_inb_command(struct usb_serial_port *port, unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; - dbg("digi_write_inb_command: TOP: port=%d, count=%d", + dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n", priv->dp_port_num, count); if (timeout) @@ -549,7 +546,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port, unsigned long flags = 0; - dbg("digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x", + dev_dbg(&port->dev, + "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n", port_priv->dp_port_num, modem_signals); spin_lock_irqsave(&oob_priv->dp_port_lock, flags); @@ -687,8 +685,9 @@ static void digi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct digi_port *priv = usb_get_serial_port_data(port); - unsigned int iflag = tty->termios->c_iflag; - unsigned int cflag = tty->termios->c_cflag; + struct device *dev = &port->dev; + unsigned int iflag = tty->termios.c_iflag; + unsigned int cflag = tty->termios.c_cflag; unsigned int old_iflag = old_termios->c_iflag; unsigned int old_cflag = old_termios->c_cflag; unsigned char buf[32]; @@ -697,7 +696,9 @@ static void digi_set_termios(struct tty_struct *tty, int i = 0; speed_t baud; - dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); + dev_dbg(dev, + "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n", + priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); /* set baud rate */ baud = tty_get_baud_rate(tty); @@ -709,7 +710,7 @@ static void digi_set_termios(struct tty_struct *tty, /* don't set RTS if using hardware flow control */ /* and throttling input */ modem_signals = TIOCM_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) modem_signals |= TIOCM_RTS; digi_set_modem_signals(port, modem_signals, 1); @@ -748,7 +749,7 @@ static void digi_set_termios(struct tty_struct *tty, } } /* set parity */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) { if (cflag&PARENB) { @@ -773,7 +774,8 @@ static void digi_set_termios(struct tty_struct *tty, case CS7: arg = DIGI_WORD_SIZE_7; break; case CS8: arg = DIGI_WORD_SIZE_8; break; default: - dbg("digi_set_termios: can't handle word size %d", + dev_dbg(dev, + "digi_set_termios: can't handle word size %d\n", (cflag&CSIZE)); break; } @@ -866,7 +868,7 @@ static void digi_set_termios(struct tty_struct *tty, } ret = digi_write_oob_command(port, buf, i, 1); if (ret != 0) - dbg("digi_set_termios: write oob failed, ret=%d", ret); + dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret); tty_encode_baud_rate(tty, baud, baud); } @@ -922,7 +924,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; - dbg("digi_write: TOP: port=%d, count=%d, in_interrupt=%ld", + dev_dbg(&port->dev, + "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n", priv->dp_port_num, count, in_interrupt()); /* copy user data (which can sleep) before getting spin lock */ @@ -981,7 +984,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, dev_err_console(port, "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); - dbg("digi_write: returning %d", ret); + dev_dbg(&port->dev, "digi_write: returning %d\n", ret); return ret; } @@ -1012,7 +1015,7 @@ static void digi_write_bulk_callback(struct urb *urb) /* handle oob callback */ if (priv->dp_port_num == serial_priv->ds_oob_port_num) { - dbg("digi_write_bulk_callback: oob callback"); + dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n"); spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; wake_up_interruptible(&port->write_wait); @@ -1066,7 +1069,7 @@ static int digi_write_room(struct tty_struct *tty) room = port->bulk_out_size - 2 - priv->dp_out_buf_len; spin_unlock_irqrestore(&priv->dp_port_lock, flags); - dbg("digi_write_room: port=%d, room=%d", priv->dp_port_num, room); + dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room); return room; } @@ -1077,12 +1080,12 @@ static int digi_chars_in_buffer(struct tty_struct *tty) struct digi_port *priv = usb_get_serial_port_data(port); if (priv->dp_write_urb_in_use) { - dbg("digi_chars_in_buffer: port=%d, chars=%d", + dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n", priv->dp_port_num, port->bulk_out_size - 2); /* return(port->bulk_out_size - 2); */ return 256; } else { - dbg("digi_chars_in_buffer: port=%d, chars=%d", + dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n", priv->dp_port_num, priv->dp_out_buf_len); return priv->dp_out_buf_len; } @@ -1120,12 +1123,12 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) ret = digi_write_oob_command(port, buf, 8, 1); if (ret != 0) - dbg("digi_open: write oob failed, ret=%d", ret); + dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret); /* set termios settings */ if (tty) { - not_termios.c_cflag = ~tty->termios->c_cflag; - not_termios.c_iflag = ~tty->termios->c_iflag; + not_termios.c_cflag = ~tty->termios.c_cflag; + not_termios.c_iflag = ~tty->termios.c_iflag; digi_set_termios(tty, port, ¬_termios); } return 0; @@ -1180,7 +1183,7 @@ static void digi_close(struct usb_serial_port *port) ret = digi_write_oob_command(port, buf, 20, 0); if (ret != 0) - dbg("digi_close: write oob failed, ret=%d", ret); + dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", ret); /* wait for final commands on oob port to complete */ prepare_to_wait(&priv->dp_flush_wait, &wait, @@ -1448,9 +1451,9 @@ static int digi_read_inb_callback(struct urb *urb) tty_kref_put(tty); if (opcode == DIGI_CMD_RECEIVE_DISABLE) - dbg("%s: got RECEIVE_DISABLE", __func__); + dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__); else if (opcode != DIGI_CMD_RECEIVE_DATA) - dbg("%s: unknown opcode: %d", __func__, opcode); + dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode); return throttled ? 1 : 0; @@ -1484,7 +1487,7 @@ static int digi_read_oob_callback(struct urb *urb) status = ((unsigned char *)urb->transfer_buffer)[i++]; val = ((unsigned char *)urb->transfer_buffer)[i++]; - dbg("digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d", + dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n", opcode, line, status, val); if (status != 0 || line >= serial->type->num_ports) @@ -1500,7 +1503,7 @@ static int digi_read_oob_callback(struct urb *urb) rts = 0; if (tty) - rts = tty->termios->c_cflag & CRTSCTS; + rts = tty->termios.c_cflag & CRTSCTS; if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); @@ -1552,6 +1555,3 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cdf61dd07318..43ede4a1e12c 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -28,8 +28,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - /* * Version Information */ @@ -87,7 +85,7 @@ static int empeg_startup(struct usb_serial *serial) static void empeg_init_termios(struct tty_struct *tty) { - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; /* * The empeg-car player wants these particular tty settings. @@ -134,6 +132,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c deleted file mode 100644 index 800e8eb60003..000000000000 --- a/drivers/usb/serial/ezusb.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * EZ-USB specific functions used by some of the USB to Serial drivers. - * - * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ -#define CPUCS_REG 0x7F92 - -int ezusb_writememory(struct usb_serial *serial, int address, - unsigned char *data, int length, __u8 request) -{ - int result; - unsigned char *transfer_buffer; - - if (!serial->dev) { - printk(KERN_ERR "ezusb: %s - no physical device present, " - "failing.\n", __func__); - return -ENODEV; - } - - transfer_buffer = kmemdup(data, length, GFP_KERNEL); - if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", - __func__, length); - return -ENOMEM; - } - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, 0x40, address, 0, transfer_buffer, length, 3000); - kfree(transfer_buffer); - return result; -} -EXPORT_SYMBOL_GPL(ezusb_writememory); - -int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit) -{ - int response; - - response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0); - if (response < 0) - dev_err(&serial->dev->dev, "%s- %d failed\n", - __func__, reset_bit); - return response; -} -EXPORT_SYMBOL_GPL(ezusb_set_reset); - diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 499b15fd82f1..244477107e2f 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -25,8 +25,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1934, 0x0706) }, { } /* Terminating entry */ @@ -85,7 +83,7 @@ static void f81232_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); f81232_update_line_status(port, data, actual_length); @@ -173,10 +171,11 @@ static void f81232_set_termios(struct tty_struct *tty, /* FIXME - Stubbed out for now */ /* Don't change anything if nothing has changed */ - if (!tty_termios_hw_change(tty->termios, old_termios)) + if (!tty_termios_hw_change(&tty->termios, old_termios)) return; /* Do the real work here... */ + tty_termios_copy_hw(&tty->termios, old_termios); } static int f81232_tiocmget(struct tty_struct *tty) @@ -388,7 +387,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org"); MODULE_LICENSE("GPL v2"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bc912e5a3beb..be845873e23d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -48,14 +48,9 @@ #include "ftdi_sio.h" #include "ftdi_sio_ids.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v1.6.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" -static bool debug; static __u16 vendor = FTDI_VID; static __u16 product; @@ -584,6 +579,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, /* * ELV devices: */ @@ -704,6 +701,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) }, { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, @@ -804,13 +802,33 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) }, + { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, + USB_CLASS_VENDOR_SPEC, + USB_SUBCLASS_VENDOR_SPEC, 0x00) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, + { USB_DEVICE(FTDI_VID, PI_C865_PID) }, + { USB_DEVICE(FTDI_VID, PI_C857_PID) }, + { USB_DEVICE(PI_VID, PI_C866_PID) }, + { USB_DEVICE(PI_VID, PI_C663_PID) }, + { USB_DEVICE(PI_VID, PI_C725_PID) }, + { USB_DEVICE(PI_VID, PI_E517_PID) }, + { USB_DEVICE(PI_VID, PI_C863_PID) }, { USB_DEVICE(PI_VID, PI_E861_PID) }, + { USB_DEVICE(PI_VID, PI_C867_PID) }, + { USB_DEVICE(PI_VID, PI_E609_PID) }, + { USB_DEVICE(PI_VID, PI_E709_PID) }, + { USB_DEVICE(PI_VID, PI_100F_PID) }, + { USB_DEVICE(PI_VID, PI_1011_PID) }, + { USB_DEVICE(PI_VID, PI_1012_PID) }, + { USB_DEVICE(PI_VID, PI_1013_PID) }, + { USB_DEVICE(PI_VID, PI_1014_PID) }, + { USB_DEVICE(PI_VID, PI_1015_PID) }, + { USB_DEVICE(PI_VID, PI_1016_PID) }, + { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -1042,11 +1060,12 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) { struct ftdi_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; unsigned urb_value; int rv; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __func__); + dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__); return 0; /* no change */ } @@ -1067,18 +1086,14 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, urb_value, priv->interface, NULL, 0, WDR_TIMEOUT); if (rv < 0) { - dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s", - __func__, - (set & TIOCM_DTR) ? "HIGH" : - (clear & TIOCM_DTR) ? "LOW" : "unchanged", - (set & TIOCM_RTS) ? "HIGH" : - (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", + __func__, + (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", + (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); } else { - dbg("%s - DTR %s, RTS %s", __func__, - (set & TIOCM_DTR) ? "HIGH" : - (clear & TIOCM_DTR) ? "LOW" : "unchanged", - (set & TIOCM_RTS) ? "HIGH" : - (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__, + (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", + (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); /* FIXME: locking on last_dtr_rts */ priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set; } @@ -1090,6 +1105,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; __u32 div_value = 0; int div_okay = 1; int baud; @@ -1125,7 +1141,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, alt_speed hack */ baud = tty_get_baud_rate(tty); - dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud); + dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */ @@ -1134,8 +1150,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { baud = priv->baud_base / priv->custom_divisor; - dbg("%s - custom divisor %d sets baud rate to %d", - __func__, priv->custom_divisor, baud); + dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n", + __func__, priv->custom_divisor, baud); } /* 3. Convert baudrate to device-specific divisor */ @@ -1157,8 +1173,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", - __func__, baud); + dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", + __func__, baud); div_value = ftdi_sio_b9600; baud = 9600; div_okay = 0; @@ -1168,7 +1184,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; @@ -1191,7 +1207,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, } div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -1205,7 +1221,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, } else if (baud < 1200) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -1214,7 +1230,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, } /* priv->chip_type */ if (div_okay) { - dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s", + dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", __func__, baud, (unsigned long)div_value, ftdi_chip_name[priv->chip_type]); } @@ -1260,7 +1276,7 @@ static int write_latency_timer(struct usb_serial_port *port) if (priv->flags & ASYNC_LOW_LATENCY) l = 1; - dbg("%s: setting latency timer = %i", __func__, l); + dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -1415,8 +1431,8 @@ static void ftdi_determine_type(struct usb_serial_port *port) version = le16_to_cpu(udev->descriptor.bcdDevice); interfaces = udev->actconfig->desc.bNumInterfaces; - dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__, - version, interfaces); + dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, + version, interfaces); if (interfaces > 1) { int inter; @@ -1446,8 +1462,9 @@ static void ftdi_determine_type(struct usb_serial_port *port) /* BM-type devices have a bug where bcdDevice gets set * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { - dbg("%s: something fishy - bcdDevice too low for multi-interface device", - __func__); + dev_dbg(&port->dev, + "%s: something fishy - bcdDevice too low for multi-interface device\n", + __func__); } } else if (version < 0x200) { /* Old device. Assume it's the original SIO. */ @@ -1561,7 +1578,7 @@ static ssize_t store_event_char(struct device *dev, int v = simple_strtoul(valbuf, NULL, 10); int rv; - dbg("%s: setting event char = %i", __func__, v); + dev_dbg(&port->dev, "%s: setting event char = %i\n", __func__, v); rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -1570,7 +1587,7 @@ static ssize_t store_event_char(struct device *dev, v, priv->interface, NULL, 0, WDR_TIMEOUT); if (rv < 0) { - dbg("Unable to write event character: %i", rv); + dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); return -EIO; } @@ -1589,7 +1606,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port) /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ if (priv->chip_type != SIO) { - dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]); + dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); retval = device_create_file(&port->dev, &dev_attr_event_char); if ((!retval) && (priv->chip_type == FT232BM || @@ -1729,8 +1746,8 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) if (latency > 99) latency = 99; - dbg("%s setting NDI device latency to %d", __func__, latency); - dev_info(&udev->dev, "NDI device with a latency value of %d", latency); + dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency); + dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency); /* FIXME: errors are not returned */ usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -1948,7 +1965,7 @@ static int ftdi_process_packet(struct tty_struct *tty, char *ch; if (len < 2) { - dbg("malformed packet"); + dev_dbg(&port->dev, "malformed packet\n"); return 0; } @@ -2063,12 +2080,12 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "%s FAILED to enable/disable break state " - "(state was %d)\n", __func__, break_state); + dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", + __func__, break_state); } - dbg("%s break state is %d - urb is %d", __func__, - break_state, urb_value); + dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, + break_state, urb_value); } @@ -2080,8 +2097,9 @@ static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; + struct device *ddev = &port->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ @@ -2093,20 +2111,20 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Force baud rate if this device requires it, unless it is set to B0. */ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { - dbg("%s: forcing baud rate for this device", __func__); + dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__); tty_encode_baud_rate(tty, priv->force_baud, priv->force_baud); } /* Force RTS-CTS if this device requires it. */ if (priv->force_rtscts) { - dbg("%s: forcing rtscts for this device", __func__); + dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__); termios->c_cflag |= CRTSCTS; } cflag = termios->c_cflag; - if (old_termios == 0) + if (!old_termios) goto no_skip; if (old_termios->c_cflag == termios->c_cflag @@ -2142,10 +2160,16 @@ no_skip: } if (cflag & CSIZE) { switch (cflag & CSIZE) { - case CS7: urb_value |= 7; dbg("Setting CS7"); break; - case CS8: urb_value |= 8; dbg("Setting CS8"); break; + case CS7: + urb_value |= 7; + dev_dbg(ddev, "Setting CS7\n"); + break; + case CS8: + urb_value |= 8; + dev_dbg(ddev, "Setting CS8\n"); + break; default: - dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n"); + dev_err(ddev, "CSIZE was set but not CS7-CS8\n"); } } @@ -2158,8 +2182,8 @@ no_skip: FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , priv->interface, NULL, 0, WDR_SHORT_TIMEOUT) < 0) { - dev_err(&port->dev, "%s FAILED to set " - "databits/stopbits/parity\n", __func__); + dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", + __func__); } /* Now do the baudrate */ @@ -2171,8 +2195,7 @@ no_data_parity_stop_changes: FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, - "%s error from disable flowcontrol urb\n", + dev_err(ddev, "%s error from disable flowcontrol urb\n", __func__); } /* Drop RTS and DTR */ @@ -2181,8 +2204,7 @@ no_data_parity_stop_changes: /* set the baudrate determined before */ mutex_lock(&priv->cfg_lock); if (change_speed(tty, port)) - dev_err(&port->dev, "%s urb failed to set baudrate\n", - __func__); + dev_err(ddev, "%s urb failed to set baudrate\n", __func__); mutex_unlock(&priv->cfg_lock); /* Ensure RTS and DTR are raised when baudrate changed from 0 */ if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) @@ -2193,17 +2215,15 @@ no_data_parity_stop_changes: /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ no_c_cflag_changes: if (cflag & CRTSCTS) { - dbg("%s Setting to CRTSCTS flow control", __func__); + dev_dbg(ddev, "%s Setting to CRTSCTS flow control\n", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, - "urb failed to set to rts/cts flow control\n"); + dev_err(ddev, "urb failed to set to rts/cts flow control\n"); } - } else { /* * Xon/Xoff code @@ -2213,8 +2233,8 @@ no_c_cflag_changes: * code is executed. */ if (iflag & IXOFF) { - dbg("%s request to enable xonxoff iflag=%04x", - __func__, iflag); + dev_dbg(ddev, "%s request to enable xonxoff iflag=%04x\n", + __func__, iflag); /* Try to enable the XON/XOFF on the ftdi_sio * Set the vstart and vstop -- could have been done up * above where a lot of other dereferencing is done but @@ -2239,18 +2259,16 @@ no_c_cflag_changes: /* else clause to only run if cflag ! CRTSCTS and iflag * ! XOFF. CHECKME Assuming XON/XOFF handled by tty * stack - not by device */ - dbg("%s Turning off hardware flow control", __func__); + dev_dbg(ddev, "%s Turning off hardware flow control\n", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, - "urb failed to clear flow control\n"); + dev_err(ddev, "urb failed to clear flow control\n"); } } - } } @@ -2344,7 +2362,7 @@ static int ftdi_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); /* Based on code from acm.c and others */ switch (cmd) { @@ -2392,14 +2410,13 @@ static int ftdi_ioctl(struct tty_struct *tty, /* This is not necessarily an error - turns out the higher layers * will do some ioctls themselves (see comment above) */ - dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd); + dev_dbg(&port->dev, "%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h\n", + __func__, cmd); return -ENOIOCTLCMD; } static int __init ftdi_init(void) { - int retval; - if (vendor > 0 && product > 0) { /* Add user specified VID/PID to reserved element of table. */ int i; @@ -2409,11 +2426,7 @@ static int __init ftdi_init(void) id_table_combined[i].idVendor = vendor; id_table_combined[i].idProduct = product; } - retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined); - if (retval == 0) - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return retval; + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined); } static void __exit ftdi_exit(void) @@ -2429,8 +2442,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(vendor, ushort, 0); MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" __MODULE_STRING(FTDI_VID)")"); diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5661c7e2d415..57c12ef6625e 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -75,6 +75,9 @@ #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB #define FTDI_OPENDCC_GBM_PID 0xBFDC +/* NZR SEM 16+ USB (http://www.nzr.de) */ +#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ + /* * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) */ @@ -514,6 +517,11 @@ */ #define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */ +/* + * TIAO product ids (FTDI_VID) + * http://www.tiaowiki.com/w/Main_Page + */ +#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */ /********************************/ @@ -539,7 +547,10 @@ /* * Microchip Technology, Inc. * - * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by: + * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are + * used by single function CDC ACM class based firmware demo + * applications. The VID/PID has also been used in firmware + * emulating FTDI serial chips by: * Hornby Elite - Digital Command Control Console * http://www.hornby.com/hornby-dcc/controllers/ */ @@ -791,8 +802,34 @@ * Physik Instrumente * http://www.physikinstrumente.com/en/products/ */ +/* These two devices use the VID of FTDI */ +#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */ +#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */ + #define PI_VID 0x1a72 /* Vendor ID */ -#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */ +#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */ +#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */ +#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */ +#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */ +#define PI_C863_PID 0x1007 /* PI C-863 */ +#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */ +#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */ +#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */ +#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */ +#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */ +#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */ +#define PI_1012_PID 0x1012 /* PI Motion Controller */ +#define PI_1013_PID 0x1013 /* PI Motion Controller */ +#define PI_1014_PID 0x1014 /* PI Device */ +#define PI_1015_PID 0x1015 /* PI Device */ +#define PI_1016_PID 0x1016 /* PI Digital Servo Module */ + +/* + * Kondo Kagaku Co.Ltd. + * http://www.kondo-robot.com/EN + */ +#define KONDO_VID 0x165c +#define KONDO_USB_SERIAL_PID 0x0002 /* * Bayer Ascensia Contour blood glucose meter USB-converter cable. diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 235707961ca3..9362f8fd2385 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -16,8 +16,6 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, { }, @@ -40,6 +38,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 346c15a51066..3ee92648c02d 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -41,9 +41,6 @@ /* the mode to be set when the port ist opened */ static int initial_mode = 1; -/* debug flag */ -static bool debug; - #define GARMIN_VENDOR_ID 0x091E /* @@ -258,10 +255,7 @@ static void send_to_tty(struct usb_serial_port *port, struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty && actual_length) { - - usb_serial_debug_data(debug, &port->dev, - __func__, actual_length, data); - + usb_serial_debug_data(&port->dev, __func__, actual_length, data); tty_insert_flip_string(tty, data, actual_length); tty_flip_buffer_push(tty); } @@ -303,8 +297,9 @@ static int pkt_add(struct garmin_data *garmin_data_p, state = garmin_data_p->state; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - dbg("%s - added: pkt: %d - %d bytes", - __func__, pkt->seq, data_length); + dev_dbg(&garmin_data_p->port->dev, + "%s - added: pkt: %d - %d bytes\n", __func__, + pkt->seq, data_length); /* in serial mode, if someone is waiting for data from the device, convert and send the next packet to tty. */ @@ -359,7 +354,8 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) __u8 *ptr = pkt; unsigned l = 0; - dbg("%s - pkt-id: 0x%X.", __func__, 0xFF & pkt_id); + dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__, + 0xFF & pkt_id); *ptr++ = DLE; *ptr++ = ACK; @@ -399,20 +395,20 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) */ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) { + struct device *dev = &garmin_data_p->port->dev; unsigned long flags; const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; - int cksum = 0; int n = 0; int pktid = recpkt[0]; int size = recpkt[1]; - usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __func__, count-GSP_INITIAL_OFFSET, recpkt); + usb_serial_debug_data(&garmin_data_p->port->dev, __func__, + count-GSP_INITIAL_OFFSET, recpkt); if (size != (count-GSP_INITIAL_OFFSET-3)) { - dbg("%s - invalid size, expected %d bytes, got %d", + dev_dbg(dev, "%s - invalid size, expected %d bytes, got %d\n", __func__, size, (count-GSP_INITIAL_OFFSET-3)); return -EINVPKT; } @@ -422,8 +418,8 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) /* sanity check, remove after test ... */ if ((__u8 *)&(usbdata[3]) != recpkt) { - dbg("%s - ptr mismatch %p - %p", - __func__, &(usbdata[4]), recpkt); + dev_dbg(dev, "%s - ptr mismatch %p - %p\n", __func__, + &(usbdata[4]), recpkt); return -EINVPKT; } @@ -433,7 +429,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) } if ((0xff & (cksum + *recpkt)) != 0) { - dbg("%s - invalid checksum, expected %02x, got %02x", + dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n", __func__, 0xff & -cksum, 0xff & *recpkt); return -EINVPKT; } @@ -480,6 +476,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) static int gsp_receive(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { + struct device *dev = &garmin_data_p->port->dev; unsigned long flags; int offs = 0; int ack_or_nak_seen = 0; @@ -500,7 +497,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, skip = garmin_data_p->flags & FLAGS_GSP_SKIP; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - /* dbg("%s - dle=%d skip=%d size=%d count=%d", + /* dev_dbg(dev, "%s - dle=%d skip=%d size=%d count=%d\n", __func__, dleSeen, skip, size, count); */ if (size == 0) @@ -530,12 +527,12 @@ static int gsp_receive(struct garmin_data *garmin_data_p, if (data == ACK) { ack_or_nak_seen = ACK; - dbg("ACK packet complete."); + dev_dbg(dev, "ACK packet complete.\n"); } else if (data == NAK) { ack_or_nak_seen = NAK; - dbg("NAK packet complete."); + dev_dbg(dev, "NAK packet complete.\n"); } else { - dbg("packet complete - id=0x%X.", + dev_dbg(dev, "packet complete - id=0x%X.\n", 0xFF & data); gsp_rec_packet(garmin_data_p, size); } @@ -557,7 +554,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, } if (size >= GPS_IN_BUFSIZ) { - dbg("%s - packet too large.", __func__); + dev_dbg(dev, "%s - packet too large.\n", __func__); skip = 1; size = GSP_INITIAL_OFFSET; dleSeen = 0; @@ -602,6 +599,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, static int gsp_send(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { + struct device *dev = &garmin_data_p->port->dev; const unsigned char *src; unsigned char *dst; int pktid = 0; @@ -610,12 +608,12 @@ static int gsp_send(struct garmin_data *garmin_data_p, int i = 0; int k; - dbg("%s - state %d - %d bytes.", __func__, - garmin_data_p->state, count); + dev_dbg(dev, "%s - state %d - %d bytes.\n", __func__, + garmin_data_p->state, count); k = garmin_data_p->outsize; if ((k+count) > GPS_OUT_BUFSIZ) { - dbg("packet too large"); + dev_dbg(dev, "packet too large\n"); garmin_data_p->outsize = 0; return -4; } @@ -634,28 +632,28 @@ static int gsp_send(struct garmin_data *garmin_data_p, return 0; } - dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, k, i); + dev_dbg(dev, "%s - %d bytes in buffer, %d bytes in pkt.\n", __func__, k, i); /* garmin_data_p->outbuffer now contains a complete packet */ - usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __func__, k, garmin_data_p->outbuffer); + usb_serial_debug_data(&garmin_data_p->port->dev, __func__, k, + garmin_data_p->outbuffer); garmin_data_p->outsize = 0; if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) { - dbg("not an application packet (%d)", + dev_dbg(dev, "not an application packet (%d)\n", getLayerId(garmin_data_p->outbuffer)); return -1; } if (pktid > 255) { - dbg("packet-id %d too large", pktid); + dev_dbg(dev, "packet-id %d too large\n", pktid); return -2; } if (datalen > 255) { - dbg("packet-size %d too large", datalen); + dev_dbg(dev, "packet-size %d too large\n", datalen); return -3; } @@ -722,7 +720,7 @@ static int gsp_next_packet(struct garmin_data *garmin_data_p) struct garmin_packet *pkt = NULL; while ((pkt = pkt_pop(garmin_data_p)) != NULL) { - dbg("%s - next pkt: %d", __func__, pkt->seq); + dev_dbg(&garmin_data_p->port->dev, "%s - next pkt: %d\n", __func__, pkt->seq); result = gsp_send(garmin_data_p, pkt->data, pkt->size); if (result > 0) { kfree(pkt); @@ -768,7 +766,9 @@ static int nat_receive(struct garmin_data *garmin_data_p, if (len >= GPS_IN_BUFSIZ) { /* seems to be an invalid packet, ignore rest of input */ - dbg("%s - packet size too large: %d", __func__, len); + dev_dbg(&garmin_data_p->port->dev, + "%s - packet size too large: %d\n", + __func__, len); garmin_data_p->insize = 0; count = 0; result = -EINVPKT; @@ -849,10 +849,10 @@ static int process_resetdev_request(struct usb_serial_port *port) spin_unlock_irqrestore(&garmin_data_p->lock, flags); usb_kill_urb(port->interrupt_in_urb); - dbg("%s - usb_reset_device", __func__); + dev_dbg(&port->dev, "%s - usb_reset_device\n", __func__); status = usb_reset_device(port->serial->dev); if (status) - dbg("%s - usb_reset_device failed: %d", + dev_dbg(&port->dev, "%s - usb_reset_device failed: %d\n", __func__, status); return status; } @@ -889,7 +889,7 @@ static int garmin_init_session(struct usb_serial_port *port) if (status == 0) { usb_kill_urb(port->interrupt_in_urb); - dbg("%s - adding interrupt input", __func__); + dev_dbg(&serial->dev->dev, "%s - adding interrupt input\n", __func__); status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (status) dev_err(&serial->dev->dev, @@ -902,7 +902,7 @@ static int garmin_init_session(struct usb_serial_port *port) * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles() */ if (status == 0) { - dbg("%s - starting session ...", __func__); + dev_dbg(&serial->dev->dev, "%s - starting session ...\n", __func__); garmin_data_p->state = STATE_ACTIVE; for (i = 0; i < 3; i++) { @@ -952,8 +952,8 @@ static void garmin_close(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__, - port->number, garmin_data_p->mode, + dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n", + __func__, port->number, garmin_data_p->mode, garmin_data_p->state, garmin_data_p->flags); if (!serial) @@ -1032,7 +1032,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, memcpy(buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); + usb_serial_debug_data(&port->dev, __func__, count, buffer); usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -1073,11 +1073,12 @@ static int garmin_write_bulk(struct usb_serial_port *port, static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { + struct device *dev = &port->dev; int pktid, pktsiz, len; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; - usb_serial_debug_data(debug, &port->dev, __func__, count, buf); + usb_serial_debug_data(dev, __func__, count, buf); if (garmin_data_p->state == STATE_RESET) return -EIO; @@ -1097,27 +1098,18 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, && GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) { - dbg("%s - processing private request %d", + dev_dbg(dev, "%s - processing private request %d\n", __func__, pktid); /* drop all unfinished transfers */ garmin_clear(garmin_data_p); switch (pktid) { - - case PRIV_PKTID_SET_DEBUG: - if (pktsiz != 4) - return -EINVPKT; - debug = __le32_to_cpu(privpkt[3]); - dbg("%s - debug level set to 0x%X", - __func__, debug); - break; - case PRIV_PKTID_SET_MODE: if (pktsiz != 4) return -EINVPKT; garmin_data_p->mode = __le32_to_cpu(privpkt[3]); - dbg("%s - mode set to %d", + dev_dbg(dev, "%s - mode set to %d\n", __func__, garmin_data_p->mode); break; @@ -1133,7 +1125,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, if (pktsiz != 4) return -EINVPKT; initial_mode = __le32_to_cpu(privpkt[3]); - dbg("%s - initial_mode set to %d", + dev_dbg(dev, "%s - initial_mode set to %d\n", __func__, garmin_data_p->mode); break; @@ -1169,7 +1161,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p, if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ - dbg("%s - pkt dropped", __func__); + dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__); } else if (garmin_data_p->state != STATE_DISCONNECTED && garmin_data_p->state != STATE_RESET) { @@ -1178,7 +1170,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p, send it directly to the tty port */ if (garmin_data_p->flags & FLAGS_QUEUING) { pkt_add(garmin_data_p, data, data_length); - } else if (bulk_data || + } else if (bulk_data || getLayerId(data) == GARMIN_LAYERID_APPL) { spin_lock_irqsave(&garmin_data_p->lock, flags); @@ -1208,18 +1200,17 @@ static void garmin_read_bulk_callback(struct urb *urb) int retval; if (!serial) { - dbg("%s - bad serial pointer, exiting", __func__); + dev_dbg(&urb->dev->dev, "%s - bad serial pointer, exiting\n", __func__); return; } if (status) { - dbg("%s - nonzero read bulk status received: %d", + dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); garmin_read_process(garmin_data_p, data, urb->actual_length, 1); @@ -1239,11 +1230,11 @@ static void garmin_read_bulk_callback(struct urb *urb) retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) dev_err(&port->dev, - "%s - failed resubmitting read urb, " - "error %d\n", __func__, retval); + "%s - failed resubmitting read urb, error %d\n", + __func__, retval); } } else { - dbg("%s - end of bulk data", __func__); + dev_dbg(&port->dev, "%s - end of bulk data\n", __func__); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1268,23 +1259,23 @@ static void garmin_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); return; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { - dbg("%s - bulk data available.", __func__); + dev_dbg(&port->dev, "%s - bulk data available.\n", __func__); if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { @@ -1319,7 +1310,7 @@ static void garmin_read_int_callback(struct urb *urb) garmin_data_p->serial_num = __le32_to_cpup( (__le32 *)(data+GARMIN_PKTHDR_LENGTH)); - dbg("%s - start-of-session reply seen - serial %u.", + dev_dbg(&port->dev, "%s - start-of-session reply seen - serial %u.\n", __func__, garmin_data_p->serial_num); } @@ -1495,7 +1486,5 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(initial_mode, int, S_IRUGO); MODULE_PARM_DESC(initial_mode, "Initial mode"); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 9b026bf7afef..296612153ea2 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -24,8 +24,6 @@ #include <linux/kfifo.h> #include <linux/serial.h> -static int debug; - #ifdef CONFIG_USB_SERIAL_GENERIC static __u16 vendor = 0x05f9; @@ -60,11 +58,10 @@ static struct usb_serial_driver * const serial_drivers[] = { #endif -int usb_serial_generic_register(int _debug) +int usb_serial_generic_register(void) { int retval = 0; - debug = _debug; #ifdef CONFIG_USB_SERIAL_GENERIC generic_device_ids[0].idVendor = vendor; generic_device_ids[0].idProduct = product; @@ -171,8 +168,7 @@ retry: urb->transfer_buffer, port->bulk_out_size); urb->transfer_buffer_length = count; - usb_serial_debug_data(debug, &port->dev, __func__, count, - urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, urb->transfer_buffer); spin_lock_irqsave(&port->lock, flags); port->tx_bytes += count; spin_unlock_irqrestore(&port->lock, flags); @@ -365,8 +361,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); port->serial->type->process_read_urb(urb); /* Throttle the device if requested by tty */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e1f5ccd1e8f8..8e6faaf3580c 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -190,9 +190,6 @@ static const struct divisor_table_entry divisor_table[] = { { 230400, 1}, }; -/* local variables */ -static bool debug; - /* Number of outstanding Command Write Urbs */ static atomic_t CmdUrbs = ATOMIC_INIT(0); @@ -244,7 +241,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data); static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, __u8 param); -static int calc_baud_rate_divisor(int baud_rate, int *divisor); +static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, int baudRate); static void change_port_settings(struct tty_struct *tty, @@ -286,6 +283,7 @@ static void unicode_to_ascii(char *string, int buflen, ************************************************************************/ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; __u32 BootCurVer; __u32 BootNewVer; __u8 BootMajorVersion; @@ -311,7 +309,7 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) response = request_ihex_firmware(&fw, fw_name, &edge_serial->serial->dev->dev); if (response) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + dev_err(dev, "Failed to load image \"%s\" err %d\n", fw_name, response); return; } @@ -330,20 +328,20 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) (BootMinorVersion << 16) + BootBuildNumber; - dbg("Current Boot Image version %d.%d.%d", + dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", edge_serial->boot_descriptor.MajorVersion, edge_serial->boot_descriptor.MinorVersion, le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); if (BootNewVer > BootCurVer) { - dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d", + dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", edge_serial->boot_descriptor.MajorVersion, edge_serial->boot_descriptor.MinorVersion, le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), BootMajorVersion, BootMinorVersion, BootBuildNumber); - dbg("Downloading new Boot Image"); + dev_dbg(dev, "Downloading new Boot Image\n"); for (rec = ihex_next_binrec(rec); rec; rec = ihex_next_binrec(rec)) { @@ -362,7 +360,7 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) } } } else { - dbg("Boot Image -- already up to date"); + dev_dbg(dev, "Boot Image -- already up to date\n"); } release_firmware(fw); } @@ -379,7 +377,7 @@ static int get_string_desc(struct usb_device *dev, int Id, struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __func__, Id); + dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id); if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) @@ -400,34 +398,39 @@ static int get_string_desc(struct usb_device *dev, int Id, } #endif -static void dump_product_info(struct edgeport_product_info *product_info) +static void dump_product_info(struct edgeport_serial *edge_serial, + struct edgeport_product_info *product_info) { + struct device *dev = &edge_serial->serial->dev->dev; + /* Dump Product Info structure */ - dbg("**Product Information:"); - dbg(" ProductId %x", product_info->ProductId); - dbg(" NumPorts %d", product_info->NumPorts); - dbg(" ProdInfoVer %d", product_info->ProdInfoVer); - dbg(" IsServer %d", product_info->IsServer); - dbg(" IsRS232 %d", product_info->IsRS232); - dbg(" IsRS422 %d", product_info->IsRS422); - dbg(" IsRS485 %d", product_info->IsRS485); - dbg(" RomSize %d", product_info->RomSize); - dbg(" RamSize %d", product_info->RamSize); - dbg(" CpuRev %x", product_info->CpuRev); - dbg(" BoardRev %x", product_info->BoardRev); - dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion, - product_info->BootMinorVersion, - le16_to_cpu(product_info->BootBuildNumber)); - dbg(" FirmwareMajorVersion %d.%d.%d", - product_info->FirmwareMajorVersion, - product_info->FirmwareMinorVersion, - le16_to_cpu(product_info->FirmwareBuildNumber)); - dbg(" ManufactureDescDate %d/%d/%d", - product_info->ManufactureDescDate[0], - product_info->ManufactureDescDate[1], - product_info->ManufactureDescDate[2]+1900); - dbg(" iDownloadFile 0x%x", product_info->iDownloadFile); - dbg(" EpicVer %d", product_info->EpicVer); + dev_dbg(dev, "**Product Information:\n"); + dev_dbg(dev, " ProductId %x\n", product_info->ProductId); + dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); + dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); + dev_dbg(dev, " IsServer %d\n", product_info->IsServer); + dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232); + dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422); + dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485); + dev_dbg(dev, " RomSize %d\n", product_info->RomSize); + dev_dbg(dev, " RamSize %d\n", product_info->RamSize); + dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev); + dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev); + dev_dbg(dev, " BootMajorVersion %d.%d.%d\n", + product_info->BootMajorVersion, + product_info->BootMinorVersion, + le16_to_cpu(product_info->BootBuildNumber)); + dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n", + product_info->FirmwareMajorVersion, + product_info->FirmwareMinorVersion, + le16_to_cpu(product_info->FirmwareBuildNumber)); + dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n", + product_info->ManufactureDescDate[0], + product_info->ManufactureDescDate[1], + product_info->ManufactureDescDate[2]+1900); + dev_dbg(dev, " iDownloadFile 0x%x\n", + product_info->iDownloadFile); + dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer); } static void get_product_info(struct edgeport_serial *edge_serial) @@ -462,7 +465,7 @@ static void get_product_info(struct edgeport_serial *edge_serial) product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; else product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; - + /* Determine Product type and set appropriate flags */ switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: @@ -490,7 +493,7 @@ static void get_product_info(struct edgeport_serial *edge_serial) break; } - dump_product_info(product_info); + dump_product_info(edge_serial, product_info); } static int get_epic_descriptor(struct edgeport_serial *ep) @@ -500,6 +503,7 @@ static int get_epic_descriptor(struct edgeport_serial *ep) struct edgeport_product_info *product_info = &ep->product_info; struct edge_compatibility_descriptor *epic = &ep->epic_descriptor; struct edge_compatibility_bits *bits; + struct device *dev = &serial->dev->dev; ep->is_epic = 0; result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -509,8 +513,6 @@ static int get_epic_descriptor(struct edgeport_serial *ep) sizeof(struct edge_compatibility_descriptor), 300); - dbg("%s result = %d", __func__, result); - if (result > 0) { ep->is_epic = 1; memset(product_info, 0, sizeof(struct edgeport_product_info)); @@ -524,23 +526,23 @@ static int get_epic_descriptor(struct edgeport_serial *ep) product_info->EpicVer = epic->EpicVer; product_info->Epic = epic->Supports; product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; - dump_product_info(product_info); + dump_product_info(ep, product_info); bits = &ep->epic_descriptor.Supports; - dbg("**EPIC descriptor:"); - dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE"); - dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE"); - dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE"); - dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE"); - dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); - dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); - dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE"); - dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE"); - dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); - dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE"); - dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE"); - dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); - dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE"); + dev_dbg(dev, "**EPIC descriptor:\n"); + dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); + dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE"); } return result; @@ -561,7 +563,8 @@ static int get_epic_descriptor(struct edgeport_serial *ep) *****************************************************************************/ static void edge_interrupt_callback(struct urb *urb) { - struct edgeport_serial *edge_serial = urb->context; + struct edgeport_serial *edge_serial = urb->context; + struct device *dev; struct edgeport_port *edge_port; struct usb_serial_port *port; struct tty_struct *tty; @@ -574,8 +577,6 @@ static void edge_interrupt_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -584,36 +585,42 @@ static void edge_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } + dev = &edge_serial->serial->dev->dev; + /* process this interrupt-read even if there are no ports open */ if (length) { - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, length, data); + usb_serial_debug_data(dev, __func__, length, data); if (length > 1) { bytes_avail = data[0] | (data[1] << 8); if (bytes_avail) { spin_lock(&edge_serial->es_lock); edge_serial->rxBytesAvail += bytes_avail; - dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress); + dev_dbg(dev, + "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n", + __func__, bytes_avail, + edge_serial->rxBytesAvail, + edge_serial->read_in_progress); if (edge_serial->rxBytesAvail > 0 && !edge_serial->read_in_progress) { - dbg("%s - posting a read", __func__); + dev_dbg(dev, "%s - posting a read\n", __func__); edge_serial->read_in_progress = true; /* we have pending bytes on the bulk in pipe, send a request */ result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (result) { - dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result); + dev_err(dev, + "%s - usb_submit_urb(read bulk) failed with result = %d\n", + __func__, result); edge_serial->read_in_progress = false; } } @@ -633,9 +640,9 @@ static void edge_interrupt_callback(struct urb *urb) spin_lock(&edge_port->ep_lock); edge_port->txCredits += txCredits; spin_unlock(&edge_port->ep_lock); - dbg("%s - txcredits for port%d = %d", - __func__, portNumber, - edge_port->txCredits); + dev_dbg(dev, "%s - txcredits for port%d = %d\n", + __func__, portNumber, + edge_port->txCredits); /* tell the tty driver that something has changed */ @@ -673,49 +680,48 @@ exit: static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; + struct device *dev; unsigned char *data = urb->transfer_buffer; int retval; __u16 raw_data_length; int status = urb->status; - dbg("%s", __func__); - if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); edge_serial->read_in_progress = false; return; } if (urb->actual_length == 0) { - dbg("%s - read bulk callback with no data", __func__); + dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__); edge_serial->read_in_progress = false; return; } + dev = &edge_serial->serial->dev->dev; raw_data_length = urb->actual_length; - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, raw_data_length, data); + usb_serial_debug_data(dev, __func__, raw_data_length, data); spin_lock(&edge_serial->es_lock); /* decrement our rxBytes available by the number that we just got */ edge_serial->rxBytesAvail -= raw_data_length; - dbg("%s - Received = %d, rxBytesAvail %d", __func__, - raw_data_length, edge_serial->rxBytesAvail); + dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__, + raw_data_length, edge_serial->rxBytesAvail); process_rcvd_data(edge_serial, data, urb->actual_length); /* check to see if there's any more data for us to read */ if (edge_serial->rxBytesAvail > 0) { - dbg("%s - posting a read", __func__); + dev_dbg(dev, "%s - posting a read\n", __func__); retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (retval) { - dev_err(&urb->dev->dev, - "%s - usb_submit_urb(read bulk) failed, " - "retval = %d\n", __func__, retval); + dev_err(dev, + "%s - usb_submit_urb(read bulk) failed, retval = %d\n", + __func__, retval); edge_serial->read_in_progress = false; } } else { @@ -737,11 +743,10 @@ static void edge_bulk_out_data_callback(struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s", __func__); - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, status); } tty = tty_port_tty_get(&edge_port->port->port); @@ -773,11 +778,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s", __func__); - atomic_dec(&CmdUrbs); - dbg("%s - FREE URB %p (outstanding %d)", __func__, - urb, atomic_read(&CmdUrbs)); + dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", + __func__, urb, atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ @@ -787,8 +790,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) usb_free_urb(urb); if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, status); return; } @@ -819,12 +823,11 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); + struct device *dev = &port->dev; struct usb_serial *serial; struct edgeport_serial *edge_serial; int response; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -875,9 +878,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) { - dev_err(&port->dev, - "%s - Error %d submitting control urb\n", - __func__, response); + dev_err(dev, "%s - Error %d submitting control urb\n", + __func__, response); } } @@ -902,8 +904,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); if (response < 0) { - dev_err(&port->dev, "%s - error sending open port command\n", - __func__); + dev_err(dev, "%s - error sending open port command\n", __func__); edge_port->openPending = false; return -ENODEV; } @@ -914,7 +915,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) if (!edge_port->open) { /* open timed out */ - dbg("%s - open timedout", __func__); + dev_dbg(dev, "%s - open timedout\n", __func__); edge_port->openPending = false; return -ENODEV; } @@ -927,7 +928,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); if (!edge_port->txfifo.fifo) { - dbg("%s - no memory", __func__); + dev_dbg(dev, "%s - no memory\n", __func__); edge_close(port); return -ENOMEM; } @@ -937,15 +938,13 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) edge_port->write_in_progress = false; if (!edge_port->write_urb) { - dbg("%s - no memory", __func__); + dev_dbg(dev, "%s - no memory\n", __func__); edge_close(port); return -ENOMEM; } - dbg("%s(%d) - Initialize TX fifo to %d bytes", - __func__, port->number, edge_port->maxTxCredits); - - dbg("%s exited", __func__); + dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n", + __func__, port->number, edge_port->maxTxCredits); return 0; } @@ -963,6 +962,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) ************************************************************************/ static void block_until_chase_response(struct edgeport_port *edge_port) { + struct device *dev = &edge_port->port->dev; DEFINE_WAIT(wait); __u16 lastCredits; int timeout = 1*HZ; @@ -974,11 +974,11 @@ static void block_until_chase_response(struct edgeport_port *edge_port) /* Did we get our Chase response */ if (!edge_port->chaseResponsePending) { - dbg("%s - Got Chase Response", __func__); + dev_dbg(dev, "%s - Got Chase Response\n", __func__); /* did we get all of our credit back? */ if (edge_port->txCredits == edge_port->maxTxCredits) { - dbg("%s - Got all credits", __func__); + dev_dbg(dev, "%s - Got all credits\n", __func__); return; } } @@ -994,12 +994,12 @@ static void block_until_chase_response(struct edgeport_port *edge_port) loop--; if (loop == 0) { edge_port->chaseResponsePending = false; - dbg("%s - Chase TIMEOUT", __func__); + dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__); return; } } else { /* Reset timeout value back to 10 seconds */ - dbg("%s - Last %d, Current %d", __func__, + dev_dbg(dev, "%s - Last %d, Current %d\n", __func__, lastCredits, edge_port->txCredits); loop = 10; } @@ -1019,6 +1019,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) ************************************************************************/ static void block_until_tx_empty(struct edgeport_port *edge_port) { + struct device *dev = &edge_port->port->dev; DEFINE_WAIT(wait); struct TxFifo *fifo = &edge_port->txfifo; __u32 lastCount; @@ -1031,7 +1032,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) /* Is the Edgeport Buffer empty? */ if (lastCount == 0) { - dbg("%s - TX Buffer Empty", __func__); + dev_dbg(dev, "%s - TX Buffer Empty\n", __func__); return; } @@ -1041,13 +1042,13 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); - dbg("%s wait", __func__); + dev_dbg(dev, "%s wait\n", __func__); if (lastCount == fifo->count) { /* No activity.. count down. */ loop--; if (loop == 0) { - dbg("%s - TIMEOUT", __func__); + dev_dbg(dev, "%s - TIMEOUT\n", __func__); return; } } else { @@ -1068,8 +1069,6 @@ static void edge_close(struct usb_serial_port *port) struct edgeport_port *edge_port; int status; - dbg("%s - port %d", __func__, port->number); - edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); if (edge_serial == NULL || edge_port == NULL) @@ -1086,7 +1085,7 @@ static void edge_close(struct usb_serial_port *port) /* flush and chase */ edge_port->chaseResponsePending = true; - dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) /* block until chase finished */ @@ -1099,7 +1098,7 @@ static void edge_close(struct usb_serial_port *port) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPClose))) { /* close the port */ - dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__); send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); } @@ -1119,8 +1118,6 @@ static void edge_close(struct usb_serial_port *port) } kfree(edge_port->txfifo.fifo); edge_port->txfifo.fifo = NULL; - - dbg("%s exited", __func__); } /***************************************************************************** @@ -1141,8 +1138,6 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, int secondhalf; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -1155,14 +1150,14 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, copySize = min((unsigned int)count, (edge_port->txCredits - fifo->count)); - dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", - __func__, port->number, count, + dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n", + __func__, port->number, count, edge_port->txCredits - fifo->count, copySize); /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ if (copySize == 0) { - dbg("%s - copySize = Zero", __func__); + dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__); goto finish_write; } @@ -1175,13 +1170,12 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, */ bytesleft = fifo->size - fifo->head; firsthalf = min(bytesleft, copySize); - dbg("%s - copy %d bytes of %d into fifo ", __func__, - firsthalf, bytesleft); + dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__, + firsthalf, bytesleft); /* now copy our data */ memcpy(&fifo->fifo[fifo->head], data, firsthalf); - usb_serial_debug_data(debug, &port->dev, __func__, - firsthalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); /* update the index and size */ fifo->head += firsthalf; @@ -1194,10 +1188,9 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, secondhalf = copySize-firsthalf; if (secondhalf) { - dbg("%s - copy rest of data %d", __func__, secondhalf); + dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf); memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); - usb_serial_debug_data(debug, &port->dev, __func__, - secondhalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); /* update the index and size */ fifo->count += secondhalf; fifo->head += secondhalf; @@ -1212,8 +1205,8 @@ finish_write: send_more_port_data((struct edgeport_serial *) usb_get_serial_data(port->serial), edge_port); - dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, - copySize, edge_port->txCredits, fifo->count); + dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n", + __func__, copySize, edge_port->txCredits, fifo->count); return copySize; } @@ -1236,6 +1229,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port) { struct TxFifo *fifo = &edge_port->txfifo; + struct device *dev = &edge_port->port->dev; struct urb *urb; unsigned char *buffer; int status; @@ -1245,16 +1239,14 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, int secondhalf; unsigned long flags; - dbg("%s(%d)", __func__, edge_port->port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->write_in_progress || !edge_port->open || (fifo->count == 0)) { - dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", - __func__, edge_port->port->number, - fifo->count, edge_port->write_in_progress); + dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n", + __func__, edge_port->port->number, + fifo->count, edge_port->write_in_progress); goto exit_send; } @@ -1266,7 +1258,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, * it's better to wait for more credits so we can do a larger write. */ if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { - dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", + dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n", __func__, edge_port->port->number, fifo->count, edge_port->txCredits); goto exit_send; @@ -1315,8 +1307,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, } if (count) - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, count, &buffer[2]); + usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]); /* fill up the urb with all of our data and submit it */ usb_fill_bulk_urb(urb, edge_serial->serial->dev, @@ -1341,8 +1332,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, edge_port->txCredits += count; edge_port->icount.tx -= count; } - dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", - __func__, count, edge_port->txCredits, fifo->count); + dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", + __func__, count, edge_port->txCredits, fifo->count); exit_send: spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1363,17 +1354,13 @@ static int edge_write_room(struct tty_struct *tty) int room; unsigned long flags; - dbg("%s", __func__); - if (edge_port == NULL) return 0; if (edge_port->closePending) return 0; - dbg("%s - port %d", __func__, port->number); - if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return 0; } @@ -1382,7 +1369,7 @@ static int edge_write_room(struct tty_struct *tty) room = edge_port->txCredits - edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1403,15 +1390,13 @@ static int edge_chars_in_buffer(struct tty_struct *tty) int num_chars; unsigned long flags; - dbg("%s", __func__); - if (edge_port == NULL) return 0; if (edge_port->closePending) return 0; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return 0; } @@ -1420,8 +1405,8 @@ static int edge_chars_in_buffer(struct tty_struct *tty) edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); if (num_chars) { - dbg("%s(port %d) - returns %d", __func__, - port->number, num_chars); + dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__, + port->number, num_chars); } return num_chars; @@ -1439,13 +1424,11 @@ static void edge_throttle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1458,7 +1441,7 @@ static void edge_throttle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { edge_port->shadowMCR &= ~MCR_RTS; status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); @@ -1479,13 +1462,11 @@ static void edge_unthrottle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1497,7 +1478,7 @@ static void edge_unthrottle(struct tty_struct *tty) return; } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { edge_port->shadowMCR |= MCR_RTS; send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); @@ -1516,19 +1497,15 @@ static void edge_set_termios(struct tty_struct *tty, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int cflag; - cflag = tty->termios->c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, tty->termios->c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); - - dbg("%s - port %d", __func__, port->number); + cflag = tty->termios.c_cflag; + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); if (edge_port == NULL) return; if (!edge_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1556,7 +1533,7 @@ static int get_lsr_info(struct edgeport_port *edge_port, spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->maxTxCredits == edge_port->txCredits && edge_port->txfifo.count == 0) { - dbg("%s -- Empty", __func__); + dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__); result = TIOCSER_TEMT; } spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1573,8 +1550,6 @@ static int edge_tiocmset(struct tty_struct *tty, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int mcr; - dbg("%s - port %d", __func__, port->number); - mcr = edge_port->shadowMCR; if (set & TIOCM_RTS) mcr |= MCR_RTS; @@ -1605,8 +1580,6 @@ static int edge_tiocmget(struct tty_struct *tty) unsigned int msr; unsigned int mcr; - dbg("%s - port %d", __func__, port->number); - msr = edge_port->shadowMSR; mcr = edge_port->shadowMCR; result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ @@ -1616,9 +1589,6 @@ static int edge_tiocmget(struct tty_struct *tty) | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - - dbg("%s -- %x", __func__, result); - return result; } @@ -1642,8 +1612,8 @@ static int edge_get_icount(struct tty_struct *tty, icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", - __func__, port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__, + port->number, icount->rx, icount->tx); return 0; } @@ -1686,19 +1656,19 @@ static int edge_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number); return get_lsr_info(edge_port, (unsigned int __user *) arg); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); return get_serial_info(edge_port, (struct serial_struct __user *) arg); case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); cprev = edge_port->icount; while (1) { prepare_to_wait(&edge_port->delta_msr_wait, @@ -1745,7 +1715,7 @@ static void edge_break(struct tty_struct *tty, int break_state) /* flush and chase */ edge_port->chaseResponsePending = true; - dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) { /* block until chase finished */ @@ -1759,16 +1729,16 @@ static void edge_break(struct tty_struct *tty, int break_state) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { if (break_state == -1) { - dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_BREAK, 0); } else { - dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__); + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__); status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CLEAR_BREAK, 0); } if (status) - dbg("%s - error sending break set/clear command.", + dev_dbg(&port->dev, "%s - error sending break set/clear command.\n", __func__); } } @@ -1781,20 +1751,19 @@ static void edge_break(struct tty_struct *tty, int break_state) static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength) { + struct device *dev = &edge_serial->serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; struct tty_struct *tty; __u16 lastBufferLength; __u16 rxLen; - dbg("%s", __func__); - lastBufferLength = bufferLength + 1; while (bufferLength > 0) { /* failsafe incase we get a message that we don't understand */ if (lastBufferLength == bufferLength) { - dbg("%s - stuck in loop, exiting it.", __func__); + dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__); break; } lastBufferLength = bufferLength; @@ -1815,8 +1784,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, ++buffer; --bufferLength; - dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, - edge_serial->rxHeader1, edge_serial->rxHeader2); + dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__, + edge_serial->rxHeader1, edge_serial->rxHeader2); /* Process depending on whether this header is * data or status */ @@ -1855,10 +1824,10 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, IOSP_GET_HDR_DATA_LEN( edge_serial->rxHeader1, edge_serial->rxHeader2); - dbg("%s - Data for Port %u Len %u", - __func__, - edge_serial->rxPort, - edge_serial->rxBytesRemaining); + dev_dbg(dev, "%s - Data for Port %u Len %u\n", + __func__, + edge_serial->rxPort, + edge_serial->rxBytesRemaining); /* ASSERT(DevExt->RxPort < DevExt->NumPorts); * ASSERT(DevExt->RxBytesRemaining < @@ -1896,7 +1865,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, tty = tty_port_tty_get( &edge_port->port->port); if (tty) { - dbg("%s - Sending %d bytes to TTY for port %d", + dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", __func__, rxLen, edge_serial->rxPort); edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); tty_kref_put(tty); @@ -1935,6 +1904,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, struct usb_serial_port *port; struct edgeport_port *edge_port; struct tty_struct *tty; + struct device *dev; __u8 code = edge_serial->rxStatusCode; /* switch the port pointer to the one being currently talked about */ @@ -1946,16 +1916,15 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, __func__, edge_serial->rxPort); return; } - - dbg("%s - port %d", __func__, edge_serial->rxPort); + dev = &port->dev; if (code == IOSP_EXT_STATUS) { switch (byte2) { case IOSP_EXT_STATUS_CHASE_RSP: /* we want to do EXT status regardless of port * open/closed */ - dbg("%s - Port %u EXT CHASE_RSP Data = %02x", - __func__, edge_serial->rxPort, byte3); + dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n", + __func__, edge_serial->rxPort, byte3); /* Currently, the only EXT_STATUS is Chase, so process * here instead of one more call to one more subroutine * If/when more EXT_STATUS, there'll be more work to do @@ -1970,7 +1939,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, return; case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3); + dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", + __func__, edge_serial->rxPort, byte3); /* Port->RxCheckRsp = true; */ return; } @@ -1979,7 +1949,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, if (code == IOSP_STATUS_OPEN_RSP) { edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); edge_port->maxTxCredits = edge_port->txCredits; - dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); + dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n", + __func__, edge_serial->rxPort, byte2, edge_port->txCredits); handle_new_msr(edge_port, byte2); /* send the current line settings to the port so we are @@ -1987,7 +1958,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, tty = tty_port_tty_get(&edge_port->port->port); if (tty) { change_port_settings(tty, - edge_port, tty->termios); + edge_port, &tty->termios); tty_kref_put(tty); } @@ -2008,27 +1979,27 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, switch (code) { /* Not currently sent by Edgeport */ case IOSP_STATUS_LSR: - dbg("%s - Port %u LSR Status = %02x", - __func__, edge_serial->rxPort, byte2); + dev_dbg(dev, "%s - Port %u LSR Status = %02x\n", + __func__, edge_serial->rxPort, byte2); handle_new_lsr(edge_port, false, byte2, 0); break; case IOSP_STATUS_LSR_DATA: - dbg("%s - Port %u LSR Status = %02x, Data = %02x", - __func__, edge_serial->rxPort, byte2, byte3); + dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n", + __func__, edge_serial->rxPort, byte2, byte3); /* byte2 is LSR Register */ /* byte3 is broken data byte */ handle_new_lsr(edge_port, true, byte2, byte3); break; /* * case IOSP_EXT_4_STATUS: - * dbg("%s - Port %u LSR Status = %02x Data = %02x", + * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n", * __func__, edge_serial->rxPort, byte2, byte3); * break; */ case IOSP_STATUS_MSR: - dbg("%s - Port %u MSR Status = %02x", - __func__, edge_serial->rxPort, byte2); + dev_dbg(dev, "%s - Port %u MSR Status = %02x\n", + __func__, edge_serial->rxPort, byte2); /* * Process this new modem status and generate appropriate * events, etc, based on the new status. This routine @@ -2038,7 +2009,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, break; default: - dbg("%s - Unrecognized IOSP status code %u", __func__, code); + dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code); break; } } @@ -2073,8 +2044,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) { struct async_icount *icount; - dbg("%s %02x", __func__, newMsr); - if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; @@ -2107,8 +2076,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); struct async_icount *icount; - dbg("%s - %02x", __func__, newLsr); - edge_port->shadowLSR = lsr; if (newLsr & LSR_BREAK) { @@ -2156,7 +2123,7 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 current_length; unsigned char *transfer_buffer; - dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); + dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { @@ -2173,8 +2140,7 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, else current_length = length; -/* dbg("%s - writing %x, %x, %d", __func__, - extAddr, addr, current_length); */ +/* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */ memcpy(transfer_buffer, data, current_length); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -2207,8 +2173,6 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 current_length; unsigned char *transfer_buffer; -/* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */ - transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", @@ -2223,8 +2187,6 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, current_length = 64; else current_length = length; -/* dbg("%s - writing %x, %x, %d", __func__, - extAddr, addr, current_length); */ memcpy(transfer_buffer, data, current_length); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -2257,8 +2219,6 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 current_length; unsigned char *transfer_buffer; - dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); - transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, @@ -2273,8 +2233,6 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr, current_length = 64; else current_length = length; -/* dbg("%s - %x, %x, %d", __func__, - extAddr, addr, current_length); */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, @@ -2305,8 +2263,6 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port, int length = 0; int status = 0; - dbg("%s - %d, %d", __func__, command, param); - buffer = kmalloc(10, GFP_ATOMIC); if (!buffer) { dev_err(&edge_port->port->dev, @@ -2339,11 +2295,11 @@ static int write_cmd_usb(struct edgeport_port *edge_port, { struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; int status = 0; struct urb *urb; - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, length, buffer); + usb_serial_debug_data(dev, __func__, length, buffer); /* Allocate our next urb */ urb = usb_alloc_urb(0, GFP_ATOMIC); @@ -2351,8 +2307,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port, return -ENOMEM; atomic_inc(&CmdUrbs); - dbg("%s - ALLOCATE URB %p (outstanding %d)", - __func__, urb, atomic_read(&CmdUrbs)); + dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n", + __func__, urb, atomic_read(&CmdUrbs)); usb_fill_bulk_urb(urb, edge_serial->serial->dev, usb_sndbulkpipe(edge_serial->serial->dev, @@ -2364,9 +2320,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port, if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, - "%s - usb_submit_urb(write command) failed, status = %d\n", - __func__, status); + dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", + __func__, status); usb_kill_urb(urb); usb_free_urb(urb); atomic_dec(&CmdUrbs); @@ -2378,7 +2333,7 @@ static int write_cmd_usb(struct edgeport_port *edge_port, if (edge_port->commandPending) { /* command timed out */ - dbg("%s - command timed out", __func__); + dev_dbg(dev, "%s - command timed out\n", __func__); status = -EINVAL; } #endif @@ -2396,6 +2351,7 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, { struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; unsigned char *cmdBuffer; unsigned char *currCmd; int cmdLen = 0; @@ -2406,26 +2362,24 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { - dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d", - edge_port->port->number, baudRate); + dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n", + edge_port->port->number, baudRate); return 0; } - dbg("%s - port = %d, baud = %d", __func__, - edge_port->port->number, baudRate); + dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__, + edge_port->port->number, baudRate); - status = calc_baud_rate_divisor(baudRate, &divisor); + status = calc_baud_rate_divisor(dev, baudRate, &divisor); if (status) { - dev_err(&edge_port->port->dev, "%s - bad baud rate\n", - __func__); + dev_err(dev, "%s - bad baud rate\n", __func__); return status; } /* Alloc memory for the string of commands. */ cmdBuffer = kmalloc(0x100, GFP_ATOMIC); if (!cmdBuffer) { - dev_err(&edge_port->port->dev, - "%s - kmalloc(%d) failed.\n", __func__, 0x100); + dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); return -ENOMEM; } currCmd = cmdBuffer; @@ -2456,14 +2410,11 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor(int baudrate, int *divisor) +static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) { int i; __u16 custom; - - dbg("%s - %d", __func__, baudrate); - for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].BaudRate == baudrate) { *divisor = divisor_table[i].Divisor; @@ -2480,7 +2431,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) *divisor = custom; - dbg("%s - Baud %d = %d", __func__, baudrate, custom); + dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); return 0; } @@ -2497,25 +2448,26 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, { struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; unsigned char *cmdBuffer; unsigned char *currCmd; unsigned long cmdLen = 0; int status; - dbg("%s - write to %s register 0x%02x", - (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); + dev_dbg(dev, "%s - write to %s register 0x%02x\n", + (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && regNum == MCR) { - dbg("SendCmdWriteUartReg - Not writing to MCR Register"); + dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n"); return 0; } if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && regNum == LCR) { - dbg("SendCmdWriteUartReg - Not writing to LCR Register"); + dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n"); return 0; } @@ -2550,6 +2502,7 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios) { + struct device *dev = &edge_port->port->dev; struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); int baud; @@ -2562,33 +2515,33 @@ static void change_port_settings(struct tty_struct *tty, __u8 txFlow; int status; - dbg("%s - port %d", __func__, edge_port->port->number); + dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); if (!edge_port->open && !edge_port->openPending) { - dbg("%s - port not opened", __func__); + dev_dbg(dev, "%s - port not opened\n", __func__); return; } - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; switch (cflag & CSIZE) { case CS5: lData = LCR_BITS_5; mask = 0x1f; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: lData = LCR_BITS_6; mask = 0x3f; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: lData = LCR_BITS_7; mask = 0x7f; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; default: case CS8: lData = LCR_BITS_8; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; } @@ -2597,28 +2550,28 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & CMSPAR) { if (cflag & PARODD) { lParity = LCR_PAR_MARK; - dbg("%s - parity = mark", __func__); + dev_dbg(dev, "%s - parity = mark\n", __func__); } else { lParity = LCR_PAR_SPACE; - dbg("%s - parity = space", __func__); + dev_dbg(dev, "%s - parity = space\n", __func__); } } else if (cflag & PARODD) { lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __func__); + dev_dbg(dev, "%s - parity = odd\n", __func__); } else { lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __func__); + dev_dbg(dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(dev, "%s - parity = none\n", __func__); } if (cflag & CSTOPB) { lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } /* figure out the flow control settings */ @@ -2626,9 +2579,9 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & CRTSCTS) { rxFlow |= IOSP_RX_FLOW_RTS; txFlow |= IOSP_TX_FLOW_CTS; - dbg("%s - RTS/CTS is enabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); } else { - dbg("%s - RTS/CTS is disabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); } /* if we are implementing XON/XOFF, set the start and stop character @@ -2649,19 +2602,19 @@ static void change_port_settings(struct tty_struct *tty, /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { rxFlow |= IOSP_RX_FLOW_XON_XOFF; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, start_char, stop_char); + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, start_char, stop_char); } else { - dbg("%s - INBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); } /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { txFlow |= IOSP_TX_FLOW_XON_XOFF; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, start_char, stop_char); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, start_char, stop_char); } else { - dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); } } @@ -2704,7 +2657,7 @@ static void change_port_settings(struct tty_struct *tty, baud = 9600; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); status = send_cmd_write_baud_rate(edge_port, baud); if (status == -1) { /* Speed change was not possible - put back the old speed */ @@ -2746,9 +2699,10 @@ static void unicode_to_ascii(char *string, int buflen, ****************************************************************************/ static void get_manufacturing_desc(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; int response; - dbg("getting manufacturer descriptor"); + dev_dbg(dev, "getting manufacturer descriptor\n"); response = rom_read(edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, @@ -2757,42 +2711,41 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial) (__u8 *)(&edge_serial->manuf_descriptor)); if (response < 1) - dev_err(&edge_serial->serial->dev->dev, - "error in getting manufacturer descriptor\n"); + dev_err(dev, "error in getting manufacturer descriptor\n"); else { char string[30]; - dbg("**Manufacturer Descriptor"); - dbg(" RomSize: %dK", + dev_dbg(dev, "**Manufacturer Descriptor\n"); + dev_dbg(dev, " RomSize: %dK\n", edge_serial->manuf_descriptor.RomSize); - dbg(" RamSize: %dK", + dev_dbg(dev, " RamSize: %dK\n", edge_serial->manuf_descriptor.RamSize); - dbg(" CpuRev: %d", + dev_dbg(dev, " CpuRev: %d\n", edge_serial->manuf_descriptor.CpuRev); - dbg(" BoardRev: %d", + dev_dbg(dev, " BoardRev: %d\n", edge_serial->manuf_descriptor.BoardRev); - dbg(" NumPorts: %d", + dev_dbg(dev, " NumPorts: %d\n", edge_serial->manuf_descriptor.NumPorts); - dbg(" DescDate: %d/%d/%d", + dev_dbg(dev, " DescDate: %d/%d/%d\n", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.SerialNumber, edge_serial->manuf_descriptor.SerNumLength/2); - dbg(" SerialNumber: %s", string); + dev_dbg(dev, " SerialNumber: %s\n", string); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.AssemblyNumber, edge_serial->manuf_descriptor.AssemblyNumLength/2); - dbg(" AssemblyNumber: %s", string); + dev_dbg(dev, " AssemblyNumber: %s\n", string); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.OemAssyNumber, edge_serial->manuf_descriptor.OemAssyNumLength/2); - dbg(" OemAssyNumber: %s", string); - dbg(" UartType: %d", + dev_dbg(dev, " OemAssyNumber: %s\n", string); + dev_dbg(dev, " UartType: %d\n", edge_serial->manuf_descriptor.UartType); - dbg(" IonPid: %d", + dev_dbg(dev, " IonPid: %d\n", edge_serial->manuf_descriptor.IonPid); - dbg(" IonConfig: %d", + dev_dbg(dev, " IonConfig: %d\n", edge_serial->manuf_descriptor.IonConfig); } } @@ -2805,9 +2758,10 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial) ****************************************************************************/ static void get_boot_desc(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; int response; - dbg("getting boot descriptor"); + dev_dbg(dev, "getting boot descriptor\n"); response = rom_read(edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, @@ -2816,23 +2770,22 @@ static void get_boot_desc(struct edgeport_serial *edge_serial) (__u8 *)(&edge_serial->boot_descriptor)); if (response < 1) - dev_err(&edge_serial->serial->dev->dev, - "error in getting boot descriptor\n"); + dev_err(dev, "error in getting boot descriptor\n"); else { - dbg("**Boot Descriptor:"); - dbg(" BootCodeLength: %d", - le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); - dbg(" MajorVersion: %d", + dev_dbg(dev, "**Boot Descriptor:\n"); + dev_dbg(dev, " BootCodeLength: %d\n", + le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); + dev_dbg(dev, " MajorVersion: %d\n", edge_serial->boot_descriptor.MajorVersion); - dbg(" MinorVersion: %d", + dev_dbg(dev, " MinorVersion: %d\n", edge_serial->boot_descriptor.MinorVersion); - dbg(" BuildNumber: %d", + dev_dbg(dev, " BuildNumber: %d\n", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); - dbg(" Capabilities: 0x%x", + dev_dbg(dev, " Capabilities: 0x%x\n", le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); - dbg(" UConfig0: %d", + dev_dbg(dev, " UConfig0: %d\n", edge_serial->boot_descriptor.UConfig0); - dbg(" UConfig1: %d", + dev_dbg(dev, " UConfig1: %d\n", edge_serial->boot_descriptor.UConfig1); } } @@ -2844,6 +2797,7 @@ static void get_boot_desc(struct edgeport_serial *edge_serial) ****************************************************************************/ static void load_application_firmware(struct edgeport_serial *edge_serial) { + struct device *dev = &edge_serial->serial->dev->dev; const struct ihex_binrec *rec; const struct firmware *fw; const char *fw_name; @@ -2864,7 +2818,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) break; case EDGE_DOWNLOAD_FILE_NONE: - dbg("No download file specified, skipping download"); + dev_dbg(dev, "No download file specified, skipping download\n"); return; default: @@ -2874,7 +2828,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) response = request_ihex_firmware(&fw, fw_name, &edge_serial->serial->dev->dev); if (response) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + dev_err(dev, "Failed to load image \"%s\" err %d\n", fw_name, response); return; } @@ -2882,7 +2836,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) rec = (const struct ihex_binrec *)fw->data; build = (rec->data[2] << 8) | rec->data[3]; - dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build); + dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build); edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; @@ -2905,10 +2859,10 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) } } - dbg("sending exec_dl_code"); - response = usb_control_msg (edge_serial->serial->dev, - usb_sndctrlpipe(edge_serial->serial->dev, 0), - USB_REQUEST_ION_EXEC_DL_CODE, + dev_dbg(dev, "sending exec_dl_code\n"); + response = usb_control_msg (edge_serial->serial->dev, + usb_sndctrlpipe(edge_serial->serial->dev, 0), + USB_REQUEST_ION_EXEC_DL_CODE, 0x40, 0x4000, 0x0001, NULL, 0, 3000); release_firmware(fw); @@ -2923,6 +2877,7 @@ static int edge_startup(struct usb_serial *serial) struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; struct usb_device *dev; + struct device *ddev = &serial->dev->dev; int i, j; int response; bool interrupt_in_found; @@ -2974,32 +2929,31 @@ static int edge_startup(struct usb_serial *serial) /* serial->num_ports = serial->product_info.NumPorts; */ if ((!edge_serial->is_epic) && (edge_serial->product_info.NumPorts != serial->num_ports)) { - dev_warn(&serial->dev->dev, "Device Reported %d serial ports " - "vs. core thinking we have %d ports, email " - "greg@kroah.com this information.\n", + dev_warn(ddev, + "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n", edge_serial->product_info.NumPorts, serial->num_ports); } - dbg("%s - time 1 %ld", __func__, jiffies); + dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies); /* If not an EPiC device */ if (!edge_serial->is_epic) { /* now load the application firmware into this device */ load_application_firmware(edge_serial); - dbg("%s - time 2 %ld", __func__, jiffies); + dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies); /* Check current Edgeport EEPROM and update if necessary */ update_edgeport_E2PROM(edge_serial); - dbg("%s - time 3 %ld", __func__, jiffies); + dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies); /* set the configuration to use #1 */ -/* dbg("set_configuration 1"); */ +/* dev_dbg(ddev, "set_configuration 1\n"); */ /* usb_set_configuration (dev, 1); */ } - dbg(" FirmwareMajorVersion %d.%d.%d", + dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n", edge_serial->product_info.FirmwareMajorVersion, edge_serial->product_info.FirmwareMinorVersion, le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); @@ -3011,8 +2965,7 @@ static int edge_startup(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", - __func__); + dev_err(ddev, "%s - Out of memory\n", __func__); for (j = 0; j < i; ++j) { kfree(usb_get_serial_port_data(serial->port[j])); usb_set_serial_port_data(serial->port[j], @@ -3044,19 +2997,19 @@ static int edge_startup(struct usb_serial *serial) if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { /* we found a interrupt in endpoint */ - dbg("found interrupt in"); + dev_dbg(ddev, "found interrupt in\n"); /* not set up yet, so do it now */ edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->interrupt_read_urb) { - dev_err(&dev->dev, "out of memory\n"); + dev_err(ddev, "out of memory\n"); return -ENOMEM; } edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { - dev_err(&dev->dev, "out of memory\n"); + dev_err(ddev, "out of memory\n"); usb_free_urb(edge_serial->interrupt_read_urb); return -ENOMEM; } @@ -3081,13 +3034,13 @@ static int edge_startup(struct usb_serial *serial) if (!bulk_in_found && (usb_endpoint_is_bulk_in(endpoint))) { /* we found a bulk in endpoint */ - dbg("found bulk in"); + dev_dbg(ddev, "found bulk in\n"); /* not set up yet, so do it now */ edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->read_urb) { - dev_err(&dev->dev, "out of memory\n"); + dev_err(ddev, "out of memory\n"); return -ENOMEM; } edge_serial->bulk_in_buffer = @@ -3114,7 +3067,7 @@ static int edge_startup(struct usb_serial *serial) if (!bulk_out_found && (usb_endpoint_is_bulk_out(endpoint))) { /* we found a bulk out endpoint */ - dbg("found bulk out"); + dev_dbg(ddev, "found bulk out\n"); edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress; bulk_out_found = true; @@ -3122,8 +3075,7 @@ static int edge_startup(struct usb_serial *serial) } if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { - dev_err(&dev->dev, "Error - the proper endpoints " - "were not found!\n"); + dev_err(ddev, "Error - the proper endpoints were not found!\n"); return -ENODEV; } @@ -3132,8 +3084,7 @@ static int edge_startup(struct usb_serial *serial) response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); if (response) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", + dev_err(ddev, "%s - Error %d submitting control urb\n", __func__, response); } return response; @@ -3148,8 +3099,6 @@ static void edge_disconnect(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); - dbg("%s", __func__); - /* stop reads and writes on all ports */ /* free up our endpoint stuff */ if (edge_serial->is_epic) { @@ -3173,8 +3122,6 @@ static void edge_release(struct usb_serial *serial) struct edgeport_serial *edge_serial = usb_get_serial_data(serial); int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) kfree(usb_get_serial_port_data(serial->port[i])); @@ -3190,6 +3137,3 @@ MODULE_FIRMWARE("edgeport/boot.fw"); MODULE_FIRMWARE("edgeport/boot2.fw"); MODULE_FIRMWARE("edgeport/down.fw"); MODULE_FIRMWARE("edgeport/down2.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 3936904c6419..a2209cd45093 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -201,8 +201,6 @@ static unsigned char OperationalMajorVersion; static unsigned char OperationalMinorVersion; static unsigned short OperationalBuildNumber; -static bool debug; - static int closing_wait = EDGE_CLOSING_WAIT; static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ @@ -233,8 +231,8 @@ static int ti_vread_sync(struct usb_device *dev, __u8 request, if (status < 0) return status; if (status != size) { - dbg("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); return -ECOMM; } return 0; @@ -251,8 +249,8 @@ static int ti_vsend_sync(struct usb_device *dev, __u8 request, if (status < 0) return status; if (status != size) { - dbg("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); return -ECOMM; } return 0; @@ -270,7 +268,7 @@ static int purge_port(struct usb_serial_port *port, __u16 mask) { int port_number = port->number - port->serial->minor; - dbg("%s - port %d, mask %x", __func__, port_number, mask); + dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); return send_cmd(port->serial->dev, UMPC_PURGE_PORT, @@ -295,7 +293,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, __u8 read_length; __be16 be_start_address; - dbg("%s - @ %x for %d", __func__, start_address, length); + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); /* Read in blocks of 64 bytes * (TI firmware can't handle more than 64 byte reads) @@ -307,8 +305,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, read_length = (__u8)length; if (read_length > 1) { - dbg("%s - @ %x for %d", __func__, - start_address, read_length); + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); } be_start_address = cpu_to_be16(start_address); status = ti_vread_sync(dev, UMPC_MEMORY_READ, @@ -317,13 +314,12 @@ static int read_download_mem(struct usb_device *dev, int start_address, buffer, read_length); if (status) { - dbg("%s - ERROR %x", __func__, status); + dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status); return status; } if (read_length > 1) - usb_serial_debug_data(debug, &dev->dev, __func__, - read_length, buffer); + usb_serial_debug_data(&dev->dev, __func__, read_length, buffer); /* Update pointers/length */ start_address += read_length; @@ -353,15 +349,14 @@ static int read_boot_mem(struct edgeport_serial *serial, UMPC_MEMORY_READ, serial->TI_I2C_Type, (__u16)(start_address+i), &buffer[i], 0x01); if (status) { - dbg("%s - ERROR %x", __func__, status); + dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status); return status; } } - dbg("%s - start_address = %x, length = %d", - __func__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, length, buffer); + dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n", + __func__, start_address, length); + usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer); serial->TiReadI2C = 1; @@ -398,10 +393,8 @@ static int write_boot_mem(struct edgeport_serial *serial, return status; } - dbg("%s - start_sddr = %x, length = %d", - __func__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, length, buffer); + dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length); + usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer); return status; } @@ -411,6 +404,7 @@ static int write_boot_mem(struct edgeport_serial *serial, static int write_i2c_mem(struct edgeport_serial *serial, int start_address, int length, __u8 address_type, __u8 *buffer) { + struct device *dev = &serial->serial->dev->dev; int status = 0; int write_length; __be16 be_start_address; @@ -424,10 +418,9 @@ static int write_i2c_mem(struct edgeport_serial *serial, if (write_length > length) write_length = length; - dbg("%s - BytesInFirstPage Addr = %x, length = %d", - __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, write_length, buffer); + dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(dev, __func__, write_length, buffer); /* Write first page */ be_start_address = cpu_to_be16(start_address); @@ -436,7 +429,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, (__force __u16)be_start_address, buffer, write_length); if (status) { - dbg("%s - ERROR %d", __func__, status); + dev_dbg(dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -452,10 +445,9 @@ static int write_i2c_mem(struct edgeport_serial *serial, else write_length = length; - dbg("%s - Page Write Addr = %x, length = %d", - __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, write_length, buffer); + dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(dev, __func__, write_length, buffer); /* Write next page */ be_start_address = cpu_to_be16(start_address); @@ -464,8 +456,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, (__force __u16)be_start_address, buffer, write_length); if (status) { - dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n", - __func__, status); + dev_err(dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -508,7 +499,7 @@ static int tx_active(struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg("%s - XByteCount 0x%X", __func__, oedb->XByteCount); + dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount); /* and the LSR */ status = read_ram(port->port->serial->dev, @@ -516,7 +507,7 @@ static int tx_active(struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg("%s - LSR = 0x%X", __func__, *lsr); + dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr); /* If either buffer has data or we are transmitting then return TRUE */ if ((oedb->XByteCount & 0x80) != 0) @@ -527,7 +518,7 @@ static int tx_active(struct edgeport_port *port) /* We return Not Active if we get any kind of error */ exit_is_tx_active: - dbg("%s - return %d", __func__, bytes_left); + dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left); kfree(lsr); kfree(oedb); @@ -599,14 +590,13 @@ static int choose_config(struct usb_device *dev) * configuration # 1, which is Config Descriptor 0. */ - dbg("%s - Number of Interfaces = %d", - __func__, dev->config->desc.bNumInterfaces); - dbg("%s - MAX Power = %d", - __func__, dev->config->desc.bMaxPower * 2); + dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n", + __func__, dev->config->desc.bNumInterfaces); + dev_dbg(&dev->dev, "%s - MAX Power = %d\n", + __func__, dev->config->desc.bMaxPower * 2); if (dev->config->desc.bNumInterfaces != 1) { - dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", - __func__); + dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__); return -ENODEV; } @@ -684,7 +674,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) cs = (__u8)(cs + buffer[i]); if (cs != rom_desc->CheckSum) { - dbg("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); + pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); return -EINVAL; } return 0; @@ -736,11 +726,11 @@ static int check_i2c_image(struct edgeport_serial *serial) if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) { status = -ENODEV; - dbg("%s - structure too big, erroring out.", __func__); + dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__); break; } - dbg("%s Type = 0x%x", __func__, rom_desc->Type); + dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type); /* Skip type 2 record */ ttype = rom_desc->Type & 0x0f; @@ -779,18 +769,18 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) int start_address; struct ti_i2c_desc *rom_desc; struct edge_ti_manuf_descriptor *desc; + struct device *dev = &serial->serial->dev->dev; rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err(&serial->serial->dev->dev, "%s - out of memory\n", - __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION, rom_desc); if (!start_address) { - dbg("%s - Edge Descriptor not found in I2C", __func__); + dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__); status = -ENODEV; goto exit; } @@ -804,12 +794,12 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) status = valid_csum(rom_desc, buffer); desc = (struct edge_ti_manuf_descriptor *)buffer; - dbg("%s - IonConfig 0x%x", __func__, desc->IonConfig); - dbg("%s - Version %d", __func__, desc->Version); - dbg("%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev); - dbg("%s - NumPorts %d", __func__, desc->NumPorts); - dbg("%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts); - dbg("%s - TotalPorts %d", __func__, desc->TotalPorts); + dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig); + dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version); + dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev); + dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts); + dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts); + dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts); exit: kfree(rom_desc); @@ -855,8 +845,8 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) err = request_firmware(&fw, fw_name, dev); if (err) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - fw_name, err); + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, err); kfree(buffer); return err; } @@ -903,13 +893,13 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) /* Try to figure out what type of I2c we have */ static int i2c_type_bootmode(struct edgeport_serial *serial) { + struct device *dev = &serial->serial->dev->dev; int status; u8 *data; data = kmalloc(1, GFP_KERNEL); if (!data) { - dev_err(&serial->serial->dev->dev, - "%s - out of memory\n", __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -917,11 +907,11 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01); if (status) - dbg("%s - read 2 status error = %d", __func__, status); + dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, *data); + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); if ((!status) && (*data == UMP5152 || *data == UMP3410)) { - dbg("%s - ROM_TYPE_II", __func__); + dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto out; } @@ -930,16 +920,16 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01); if (status) - dbg("%s - read 3 status error = %d", __func__, status); + dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, *data); + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); if ((!status) && (*data == UMP5152 || *data == UMP3410)) { - dbg("%s - ROM_TYPE_III", __func__); + dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; goto out; } - dbg("%s - Unknown", __func__); + dev_dbg(dev, "%s - Unknown\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; status = -ENODEV; out: @@ -1050,11 +1040,11 @@ static int download_fw(struct edgeport_serial *serial) if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { struct ti_i2c_desc *rom_desc; - dbg("%s - RUNNING IN DOWNLOAD MODE", __func__); + dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); status = check_i2c_image(serial); if (status) { - dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__); + dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); return status; } @@ -1074,7 +1064,7 @@ static int download_fw(struct edgeport_serial *serial) /* Check version number of ION descriptor */ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dbg("%s - Wrong CPU Rev %d (Must be 2)", + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", __func__, ti_cpu_rev(ti_manuf_desc)); kfree(ti_manuf_desc); return -EINVAL; @@ -1094,8 +1084,7 @@ static int download_fw(struct edgeport_serial *serial) struct ti_i2c_firmware_rec *firmware_version; u8 *record; - dbg("%s - Found Type FIRMWARE (Type 2) record", - __func__); + dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__); firmware_version = kmalloc(sizeof(*firmware_version), GFP_KERNEL); @@ -1127,22 +1116,21 @@ static int download_fw(struct edgeport_serial *serial) download_new_ver = (OperationalMajorVersion << 8) + (OperationalMinorVersion); - dbg("%s - >> FW Versions Device %d.%d Driver %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", + __func__, firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); /* Check if we have an old version in the I2C and update if necessary */ if (download_cur_ver < download_new_ver) { - dbg("%s - Update I2C dld from %d.%d to %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); record = kmalloc(1, GFP_KERNEL); if (!record) { @@ -1196,9 +1184,7 @@ static int download_fw(struct edgeport_serial *serial) } if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { - dev_err(dev, - "%s - error resetting device\n", - __func__); + dev_err(dev, "%s - error resetting device\n", __func__); kfree(record); kfree(firmware_version); kfree(rom_desc); @@ -1206,15 +1192,14 @@ static int download_fw(struct edgeport_serial *serial) return -ENODEV; } - dbg("%s - HARDWARE RESET", __func__); + dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); /* Reset UMP -- Back to BOOT MODE */ status = ti_vsend_sync(serial->serial->dev, UMPC_HARDWARE_RESET, 0, 0, NULL, 0); - dbg("%s - HARDWARE RESET return %d", - __func__, status); + dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status); /* return an error on purpose. */ kfree(record); @@ -1249,8 +1234,7 @@ static int download_fw(struct edgeport_serial *serial) return -ENOMEM; } - dbg("%s - Found Type BLANK FIRMWARE (Type F2) record", - __func__); + dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__); /* * In order to update the I2C firmware we must change @@ -1292,7 +1276,7 @@ static int download_fw(struct edgeport_serial *serial) HEADER_SIZE, vheader); if (status) { - dbg("%s - can't read header back", __func__); + dev_dbg(dev, "%s - can't read header back\n", __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1300,8 +1284,7 @@ static int download_fw(struct edgeport_serial *serial) return status; } if (memcmp(vheader, header, HEADER_SIZE)) { - dbg("%s - write download record failed", - __func__); + dev_dbg(dev, "%s - write download record failed\n", __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1312,13 +1295,13 @@ static int download_fw(struct edgeport_serial *serial) kfree(vheader); kfree(header); - dbg("%s - Start firmware update", __func__); + dev_dbg(dev, "%s - Start firmware update\n", __func__); /* Tell firmware to copy download image into I2C */ status = ti_vsend_sync(serial->serial->dev, UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0); - dbg("%s - Update complete 0x%x", __func__, status); + dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status); if (status) { dev_err(dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", @@ -1338,7 +1321,7 @@ static int download_fw(struct edgeport_serial *serial) /********************************************************************/ /* Boot Mode */ /********************************************************************/ - dbg("%s - RUNNING IN BOOT MODE", __func__); + dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__); /* Configure the TI device so we can use the BULK pipes for download */ status = config_boot_dev(serial->serial->dev); @@ -1347,8 +1330,8 @@ static int download_fw(struct edgeport_serial *serial) if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) { - dbg("%s - VID = 0x%x", __func__, - le16_to_cpu(serial->serial->dev->descriptor.idVendor)); + dev_dbg(dev, "%s - VID = 0x%x\n", __func__, + le16_to_cpu(serial->serial->dev->descriptor.idVendor)); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto stayinbootmode; } @@ -1385,8 +1368,8 @@ static int download_fw(struct edgeport_serial *serial) /* Check for version 2 */ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dbg("%s - Wrong CPU Rev %d (Must be 2)", - __func__, ti_cpu_rev(ti_manuf_desc)); + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", + __func__, ti_cpu_rev(ti_manuf_desc)); kfree(ti_manuf_desc); goto stayinbootmode; } @@ -1421,8 +1404,8 @@ static int download_fw(struct edgeport_serial *serial) err = request_firmware(&fw, fw_name, dev); if (err) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - fw_name, err); + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, err); kfree(buffer); return err; } @@ -1442,23 +1425,20 @@ static int download_fw(struct edgeport_serial *serial) header->CheckSum = cs; /* Download the operational code */ - dbg("%s - Downloading operational code image (TI UMP)", - __func__); + dev_dbg(dev, "%s - Downloading operational code image (TI UMP)\n", __func__); status = download_code(serial, buffer, buffer_size); kfree(buffer); if (status) { - dbg("%s - Error downloading operational code image", - __func__); + dev_dbg(dev, "%s - Error downloading operational code image\n", __func__); return status; } /* Device will reboot */ serial->product_info.TiMode = TI_MODE_TRANSITIONING; - dbg("%s - Download successful -- Device rebooting...", - __func__); + dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); /* return an error on purpose */ return -ENODEV; @@ -1466,7 +1446,7 @@ static int download_fw(struct edgeport_serial *serial) stayinbootmode: /* Eprom is invalid or blank stay in boot mode */ - dbg("%s - STAYING IN BOOT MODE", __func__); + dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; return 0; @@ -1487,7 +1467,7 @@ static int restore_mcr(struct edgeport_port *port, __u8 mcr) { int status = 0; - dbg("%s - %x", __func__, mcr); + dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr); status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR); if (status) @@ -1524,7 +1504,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) struct async_icount *icount; struct tty_struct *tty; - dbg("%s - %02x", __func__, msr); + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr); if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { @@ -1566,7 +1546,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, LSR_FRM_ERR | LSR_BREAK)); struct tty_struct *tty; - dbg("%s - %02x", __func__, new_lsr); + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); edge_port->shadow_lsr = lsr; @@ -1604,6 +1584,7 @@ static void edge_interrupt_callback(struct urb *urb) struct edgeport_serial *edge_serial = urb->context; struct usb_serial_port *port; struct edgeport_port *edge_port; + struct device *dev; unsigned char *data = urb->transfer_buffer; int length = urb->actual_length; int port_number; @@ -1613,8 +1594,6 @@ static void edge_interrupt_callback(struct urb *urb) __u8 msr; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -1623,7 +1602,7 @@ static void edge_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: @@ -1633,27 +1612,26 @@ static void edge_interrupt_callback(struct urb *urb) } if (!length) { - dbg("%s - no data in urb", __func__); + dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__); goto exit; } - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, length, data); + dev = &edge_serial->serial->dev->dev; + usb_serial_debug_data(dev, __func__, length, data); if (length != 2) { - dbg("%s - expecting packet of size 2, got %d", - __func__, length); + dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length); goto exit; } port_number = TIUMP_GET_PORT_FROM_CODE(data[0]); function = TIUMP_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, info 0x%x", - __func__, port_number, function, data[1]); + dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__, + port_number, function, data[1]); port = edge_serial->serial->port[port_number]; edge_port = usb_get_serial_port_data(port); if (!edge_port) { - dbg("%s - edge_port not found", __func__); + dev_dbg(dev, "%s - edge_port not found\n", __func__); return; } switch (function) { @@ -1662,13 +1640,13 @@ static void edge_interrupt_callback(struct urb *urb) if (lsr & UMP_UART_LSR_DATA_MASK) { /* Save the LSR event for bulk read completion routine */ - dbg("%s - LSR Event Port %u LSR Status = %02x", - __func__, port_number, lsr); + dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n", + __func__, port_number, lsr); edge_port->lsr_event = 1; edge_port->lsr_mask = lsr; } else { - dbg("%s - ===== Port %d LSR Status = %02x ======", - __func__, port_number, lsr); + dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n", + __func__, port_number, lsr); handle_new_lsr(edge_port, 0, lsr, 0); } break; @@ -1676,8 +1654,8 @@ static void edge_interrupt_callback(struct urb *urb) case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ /* Copy MSR from UMP */ msr = data[1]; - dbg("%s - ===== Port %u MSR Status = %02x ======", - __func__, port_number, msr); + dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n", + __func__, port_number, msr); handle_new_msr(edge_port, msr); break; @@ -1700,14 +1678,13 @@ exit: static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; + struct device *dev = &edge_port->port->dev; unsigned char *data = urb->transfer_buffer; struct tty_struct *tty; int retval = 0; int port_number; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -1716,13 +1693,10 @@ static void edge_bulk_in_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dev_err(&urb->dev->dev, - "%s - nonzero read bulk status received: %d\n", - __func__, status); + dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); } if (status == -EPIPE) @@ -1737,8 +1711,8 @@ static void edge_bulk_in_callback(struct urb *urb) if (edge_port->lsr_event) { edge_port->lsr_event = 0; - dbg("%s ===== Port %u LSR Status = %02x, Data = %02x ======", - __func__, port_number, edge_port->lsr_mask, *data); + dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n", + __func__, port_number, edge_port->lsr_mask, *data); handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data); /* Adjust buffer length/pointer */ --urb->actual_length; @@ -1747,14 +1721,12 @@ static void edge_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&edge_port->port->port); if (tty && urb->actual_length) { - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(dev, __func__, urb->actual_length, data); if (edge_port->close_pending) - dbg("%s - close pending, dropping data on the floor", + dev_dbg(dev, "%s - close pending, dropping data on the floor\n", __func__); else - edge_tty_recv(&edge_port->port->dev, tty, data, - urb->actual_length); + edge_tty_recv(dev, tty, data, urb->actual_length); edge_port->icount.rx += urb->actual_length; } tty_kref_put(tty); @@ -1769,9 +1741,7 @@ exit: spin_unlock(&edge_port->ep_lock); if (retval) - dev_err(&urb->dev->dev, - "%s - usb_submit_urb failed with result %d\n", - __func__, retval); + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } static void edge_tty_recv(struct device *dev, struct tty_struct *tty, @@ -1793,8 +1763,6 @@ static void edge_bulk_out_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; - dbg("%s - port %d", __func__, port->number); - edge_port->ep_write_urb_in_use = 0; switch (status) { @@ -1805,7 +1773,7 @@ static void edge_bulk_out_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: @@ -1830,8 +1798,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) u16 open_settings; u8 transaction_timeout; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -1850,9 +1816,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return -ENODEV; } - dbg("%s - port_number = %d, uart_base = %04x, dma_address = %04x", - __func__, port_number, edge_port->uart_base, - edge_port->dma_address); + dev_dbg(&port->dev, "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n", + __func__, port_number, edge_port->uart_base, edge_port->dma_address); dev = port->serial->dev; @@ -1870,7 +1835,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) /* set up the port settings */ if (tty) - edge_set_termios(tty, port, tty->termios); + edge_set_termios(tty, port, &tty->termios); /* open up the port */ @@ -1885,7 +1850,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) UMP_PIPE_TRANS_TIMEOUT_ENA | (transaction_timeout << 2)); - dbg("%s - Sending UMPC_OPEN_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__); /* Tell TI to open and start the port */ status = send_cmd(dev, UMPC_OPEN_PORT, @@ -1924,11 +1889,11 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return status; } - dbg("ShadowMSR 0x%X", edge_port->shadow_msr); + dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr); /* Set Initial MCR */ edge_port->shadow_mcr = MCR_RTS | MCR_DTR; - dbg("ShadowMCR 0x%X", edge_port->shadow_mcr); + dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr); edge_serial = edge_port->edge_serial; if (mutex_lock_interruptible(&edge_serial->es_lock)) @@ -1980,8 +1945,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) ++edge_serial->num_ports_open; - dbg("%s - exited", __func__); - goto release_es_lock; unlink_int_urb: @@ -1999,8 +1962,6 @@ static void edge_close(struct usb_serial_port *port) struct usb_serial *serial = port->serial; int port_number; - dbg("%s - port %d", __func__, port->number); - edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); if (edge_serial == NULL || edge_port == NULL) @@ -2019,7 +1980,7 @@ static void edge_close(struct usb_serial_port *port) /* assuming we can still talk to the device, * send a close port command to it */ - dbg("%s - send umpc_close_port", __func__); + dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); port_number = port->number - port->serial->minor; mutex_lock(&serial->disc_mutex); @@ -2042,8 +2003,6 @@ static void edge_close(struct usb_serial_port *port) } mutex_unlock(&edge_serial->es_lock); edge_port->close_pending = 0; - - dbg("%s - exited", __func__); } static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -2051,10 +2010,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } @@ -2077,9 +2034,6 @@ static void edge_send(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->ep_write_urb_in_use) { @@ -2100,8 +2054,7 @@ static void edge_send(struct tty_struct *tty) spin_unlock_irqrestore(&edge_port->ep_lock, flags); - usb_serial_debug_data(debug, &port->dev, __func__, count, - port->write_urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer); /* set up our urb */ port->write_urb->transfer_buffer_length = count; @@ -2130,8 +2083,6 @@ static int edge_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return 0; if (edge_port->close_pending == 1) @@ -2141,7 +2092,7 @@ static int edge_write_room(struct tty_struct *tty) room = kfifo_avail(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -2152,8 +2103,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return 0; if (edge_port->close_pending == 1) @@ -2163,7 +2112,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -2173,8 +2122,6 @@ static void edge_throttle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; @@ -2200,8 +2147,6 @@ static void edge_unthrottle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; @@ -2261,6 +2206,7 @@ static int restart_read(struct edgeport_port *edge_port) static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios) { + struct device *dev = &edge_port->port->dev; struct ump_uart_config *config; int baud; unsigned cflag; @@ -2268,17 +2214,16 @@ static void change_port_settings(struct tty_struct *tty, int port_number = edge_port->port->number - edge_port->port->serial->minor; - dbg("%s - port %d", __func__, edge_port->port->number); + dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { - *tty->termios = *old_termios; - dev_err(&edge_port->port->dev, "%s - out of memory\n", - __func__); + tty->termios = *old_termios; + dev_err(dev, "%s - out of memory\n", __func__); return; } - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; config->wFlags = 0; @@ -2290,20 +2235,20 @@ static void change_port_settings(struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: config->bDataBits = UMP_UART_CHAR5BITS; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: config->bDataBits = UMP_UART_CHAR6BITS; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: config->bDataBits = UMP_UART_CHAR7BITS; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; default: case CS8: config->bDataBits = UMP_UART_CHAR8BITS; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; } @@ -2311,32 +2256,32 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & PARODD) { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_ODDPARITY; - dbg("%s - parity = odd", __func__); + dev_dbg(dev, "%s - parity = odd\n", __func__); } else { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_EVENPARITY; - dbg("%s - parity = even", __func__); + dev_dbg(dev, "%s - parity = even\n", __func__); } } else { config->bParity = UMP_UART_NOPARITY; - dbg("%s - parity = none", __func__); + dev_dbg(dev, "%s - parity = none\n", __func__); } if (cflag & CSTOPB) { config->bStopBits = UMP_UART_STOPBIT2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { config->bStopBits = UMP_UART_STOPBIT1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } /* figure out the flow control settings */ if (cflag & CRTSCTS) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW; config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW; - dbg("%s - RTS/CTS is enabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); } else { - dbg("%s - RTS/CTS is disabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); tty->hw_stopped = 0; restart_read(edge_port); } @@ -2349,20 +2294,20 @@ static void change_port_settings(struct tty_struct *tty, /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); } else - dbg("%s - INBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); } else - dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; /* Round the baud rate */ baud = tty_get_baud_rate(tty); @@ -2377,17 +2322,16 @@ static void change_port_settings(struct tty_struct *tty, /* FIXME: Recompute actual baud from divisor here */ - dbg("%s - baud rate = %d, wBaudRate = %d", __func__, baud, - config->wBaudRate); + dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate); - dbg("wBaudRate: %d", (int)(461550L / config->wBaudRate)); - dbg("wFlags: 0x%x", config->wFlags); - dbg("bDataBits: %d", config->bDataBits); - dbg("bParity: %d", config->bParity); - dbg("bStopBits: %d", config->bStopBits); - dbg("cXon: %d", config->cXon); - dbg("cXoff: %d", config->cXoff); - dbg("bUartMode: %d", config->bUartMode); + dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate)); + dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags); + dev_dbg(dev, "bDataBits: %d\n", config->bDataBits); + dev_dbg(dev, "bParity: %d\n", config->bParity); + dev_dbg(dev, "bStopBits: %d\n", config->bStopBits); + dev_dbg(dev, "cXon: %d\n", config->cXon); + dev_dbg(dev, "cXoff: %d\n", config->cXoff); + dev_dbg(dev, "bUartMode: %d\n", config->bUartMode); /* move the word values into big endian mode */ cpu_to_be16s(&config->wFlags); @@ -2397,8 +2341,8 @@ static void change_port_settings(struct tty_struct *tty, (__u8)(UMPM_UART1_PORT + port_number), 0, (__u8 *)config, sizeof(*config)); if (status) - dbg("%s - error %d when trying to write config to device", - __func__, status); + dev_dbg(dev, "%s - error %d when trying to write config to device\n", + __func__, status); kfree(config); } @@ -2408,13 +2352,13 @@ static void edge_set_termios(struct tty_struct *tty, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int cflag; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, tty->termios->c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, tty->termios.c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); if (edge_port == NULL) return; @@ -2430,8 +2374,6 @@ static int edge_tiocmset(struct tty_struct *tty, unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); mcr = edge_port->shadow_mcr; if (set & TIOCM_RTS) @@ -2464,8 +2406,6 @@ static int edge_tiocmget(struct tty_struct *tty) unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); msr = edge_port->shadow_msr; @@ -2478,7 +2418,7 @@ static int edge_tiocmget(struct tty_struct *tty) | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - dbg("%s -- %x", __func__, result); + dev_dbg(&port->dev, "%s -- %x\n", __func__, result); spin_unlock_irqrestore(&edge_port->ep_lock, flags); return result; @@ -2538,15 +2478,15 @@ static int edge_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return get_serial_info(edge_port, (struct serial_struct __user *) arg); case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = edge_port->icount; while (1) { interruptible_sleep_on(&edge_port->delta_msr_wait); @@ -2578,8 +2518,6 @@ static void edge_break(struct tty_struct *tty, int break_state) int status; int bv = 0; /* Off */ - dbg("%s - state = %d", __func__, break_state); - /* chase the port close */ chase_port(edge_port, 0, 0); @@ -2587,8 +2525,8 @@ static void edge_break(struct tty_struct *tty, int break_state) bv = 1; /* On */ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); if (status) - dbg("%s - error %d sending break set/clear command.", - __func__, status); + dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n", + __func__, status); } static int edge_startup(struct usb_serial *serial) @@ -2655,7 +2593,6 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - dbg("%s", __func__); } static void edge_release(struct usb_serial *serial) @@ -2663,8 +2600,6 @@ static void edge_release(struct usb_serial *serial) int i; struct edgeport_port *edge_port; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { edge_port = usb_get_serial_port_data(serial->port[i]); kfifo_free(&edge_port->write_fifo); @@ -2692,7 +2627,7 @@ static ssize_t store_uart_mode(struct device *dev, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int v = simple_strtoul(valbuf, NULL, 0); - dbg("%s: setting uart_mode = %d", __func__, v); + dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v); if (v < 256) edge_port->bUartMode = v; @@ -2789,9 +2724,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("edgeport/down3.bin"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index c85a7eb87d4e..1068bf22e27e 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -33,7 +33,6 @@ #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>" #define DRIVER_DESC "USB PocketPC PDA driver" -static bool debug; static int connect_retries = KP_RETRIES; static int initial_wait; @@ -616,9 +615,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - module_param(connect_retries, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)"); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5811d34b6c6b..20a132ec39e2 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -138,11 +138,10 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static bool debug; - static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct usb_device *dev = port->serial->dev; + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; u8 *buf_flow_init; int result; @@ -154,8 +153,8 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) /* --1: Tell the modem to initialize (we think) From sniffs this is * always the first thing that gets sent to the modem during * opening of the device */ - dbg("%s: Sending SIO_INIT (we guess)", __func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_INIT, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0, @@ -164,22 +163,19 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 0, 100000); if (result < 0) - dev_err(&port->dev, - "Init of modem failed (error = %d)\n", result); + dev_err(dev, "Init of modem failed (error = %d)\n", result); /* reset the bulk pipes */ - usb_clear_halt(dev, - usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); - usb_clear_halt(dev, - usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); + usb_clear_halt(udev, usb_rcvbulkpipe(udev, port->bulk_in_endpointAddress)); + usb_clear_halt(udev, usb_sndbulkpipe(udev, port->bulk_out_endpointAddress)); /*--2: Start reading from the device */ - dbg("%s: setting up bulk read callback", __func__); + dev_dbg(dev, "%s: setting up bulk read callback\n", __func__); usb_wwan_open(tty, port); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ - dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_RXCTL, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, IPW_RXBULK_ON, @@ -188,12 +184,11 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 0, 100000); if (result < 0) - dev_err(&port->dev, - "Enabling bulk RxRead failed (error = %d)\n", result); + dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result); /*--4: setup the initial flowcontrol */ - dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_HANDFLOW, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0, @@ -202,8 +197,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 0x10, 200000); if (result < 0) - dev_err(&port->dev, - "initial flowcontrol failed (error = %d)\n", result); + dev_err(dev, "initial flowcontrol failed (error = %d)\n", result); kfree(buf_flow_init); return 0; @@ -227,19 +221,19 @@ static void ipw_release(struct usb_serial *serial) { struct usb_wwan_intf_private *data = usb_get_serial_data(serial); - usb_wwan_release(serial); usb_set_serial_data(serial, NULL); kfree(data); } static void ipw_dtr_rts(struct usb_serial_port *port, int on) { - struct usb_device *dev = port->serial->dev; + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; int result; - dbg("%s: on = %d", __func__, on); + dev_dbg(dev, "%s: on = %d\n", __func__, on); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, @@ -248,10 +242,9 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on) 0, 200000); if (result < 0) - dev_err(&port->dev, "setting dtr failed (error = %d)\n", - result); + dev_err(dev, "setting dtr failed (error = %d)\n", result); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, @@ -260,18 +253,18 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on) 0, 200000); if (result < 0) - dev_err(&port->dev, "setting rts failed (error = %d)\n", - result); + dev_err(dev, "setting rts failed (error = %d)\n", result); } static void ipw_close(struct usb_serial_port *port) { - struct usb_device *dev = port->serial->dev; + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; int result; /*--3: purge */ - dbg("%s:sending purge", __func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + dev_dbg(dev, "%s:sending purge\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 0x03, @@ -280,12 +273,12 @@ static void ipw_close(struct usb_serial_port *port) 0, 200000); if (result < 0) - dev_err(&port->dev, "purge failed (error = %d)\n", result); + dev_err(dev, "purge failed (error = %d)\n", result); /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */ - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), IPW_SIO_RXCTL, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, IPW_RXBULK_OFF, @@ -295,8 +288,7 @@ static void ipw_close(struct usb_serial_port *port) 100000); if (result < 0) - dev_err(&port->dev, - "Disabling bulk RxRead failed (error = %d)\n", result); + dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result); usb_wwan_close(port); } @@ -309,12 +301,12 @@ static struct usb_serial_driver ipw_device = { .description = "IPWireless converter", .id_table = id_table, .num_ports = 1, - .disconnect = usb_wwan_disconnect, .open = ipw_open, .close = ipw_close, .probe = ipw_probe, .attach = usb_wwan_startup, .release = ipw_release, + .port_remove = usb_wwan_port_remove, .dtr_rts = ipw_dtr_rts, .write = usb_wwan_write, }; @@ -329,6 +321,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index fc09414c960f..e24e2d4f4c1b 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -38,15 +38,9 @@ #include <linux/usb/serial.h> #include <linux/usb/irda.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v0.5" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB IR Dongle driver" -static bool debug; - /* if overridden by the user, then use their value for the size of the read and * write urbs */ static int buffer_size; @@ -381,7 +375,7 @@ static void ir_set_termios(struct tty_struct *tty, ir_xbof = ir_xbof_change(xbof) ; /* Only speed changes are supported */ - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); tty_encode_baud_rate(tty, baud, baud); /* @@ -430,18 +424,12 @@ err_buf: static int __init ir_init(void) { - int retval; - if (buffer_size) { ir_device.bulk_in_size = buffer_size; ir_device.bulk_out_size = buffer_size; } - retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table); - if (retval == 0) - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return retval; + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table); } static void __exit ir_exit(void) @@ -457,8 +445,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(xbof, int, 0); MODULE_PARM_DESC(xbof, "Force specific number of XBOFs"); module_param(buffer_size, int, 0); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 22b1eb5040b7..01da3ea36e89 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -32,13 +32,6 @@ #include "iuu_phoenix.h" #include <linux/random.h> - -#ifdef CONFIG_USB_SERIAL_DEBUG -static bool debug = 1; -#else -static bool debug; -#endif - /* * Version Information */ @@ -72,7 +65,6 @@ struct iuu_private { u8 *writebuf; /* buffer for writing to device */ int writelen; /* num of byte to write to device */ u8 *buf; /* used for initialize speed */ - u8 *dbgbuf; /* debug buffer */ u8 len; int vcc; /* vcc (either 3 or 5 V) */ u32 baud; @@ -84,32 +76,31 @@ struct iuu_private { static void iuu_free_buf(struct iuu_private *priv) { kfree(priv->buf); - kfree(priv->dbgbuf); kfree(priv->writebuf); } -static int iuu_alloc_buf(struct iuu_private *priv) +static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv) { priv->buf = kzalloc(256, GFP_KERNEL); - priv->dbgbuf = kzalloc(256, GFP_KERNEL); priv->writebuf = kzalloc(256, GFP_KERNEL); - if (!priv->buf || !priv->dbgbuf || !priv->writebuf) { + if (!priv->buf || !priv->writebuf) { iuu_free_buf(priv); - dbg("%s problem allocation buffer", __func__); + dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__); return -ENOMEM; } - dbg("%s - Privates buffers allocation success", __func__); + dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__); return 0; } static int iuu_startup(struct usb_serial *serial) { struct iuu_private *priv; + priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); - dbg("%s- priv allocation success", __func__); + dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__); if (!priv) return -ENOMEM; - if (iuu_alloc_buf(priv)) { + if (iuu_alloc_buf(serial, priv)) { kfree(priv); return -ENOMEM; } @@ -130,13 +121,13 @@ static void iuu_release(struct usb_serial *serial) if (priv) { iuu_free_buf(priv); - dbg("%s - I will free all", __func__); + dev_dbg(&port->dev, "%s - I will free all\n", __func__); usb_set_serial_port_data(port, NULL); - dbg("%s - priv is not anymore in port structure", __func__); + dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__); kfree(priv); - dbg("%s priv is now kfree", __func__); + dev_dbg(&port->dev, "%s priv is now kfree\n", __func__); } } @@ -148,13 +139,13 @@ static int iuu_tiocmset(struct tty_struct *tty, unsigned long flags; /* FIXME: locking on tiomstatus */ - dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__, - port->number, set, clear); + dev_dbg(&port->dev, "%s msg : SET = 0x%04x, CLEAR = 0x%04x\n", + __func__, set, clear); spin_lock_irqsave(&priv->lock, flags); if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) { - dbg("%s TIOCMSET RESET called !!!", __func__); + dev_dbg(&port->dev, "%s TIOCMSET RESET called !!!\n", __func__); priv->reset = 1; } if (set & TIOCM_RTS) @@ -190,7 +181,7 @@ static void iuu_rxcmd(struct urb *urb) int status = urb->status; if (status) { - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); /* error stop all */ return; } @@ -244,13 +235,13 @@ static void iuu_update_status_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); /* error stop all */ return; } st = urb->transfer_buffer; - dbg("%s - enter", __func__); + dev_dbg(&port->dev, "%s - enter\n", __func__); if (urb->actual_length == 1) { switch (st[0]) { case 0x1: @@ -272,7 +263,7 @@ static void iuu_status_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), @@ -311,9 +302,9 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) count, &actual, HZ * 1); if (status != IUU_OPERATION_OK) - dbg("%s - error = %2x", __func__, status); + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); else - dbg("%s - write OK !", __func__); + dev_dbg(&port->dev, "%s - write OK !\n", __func__); return status; } @@ -331,9 +322,9 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) count, &actual, HZ * 1); if (status != IUU_OPERATION_OK) - dbg("%s - error = %2x", __func__, status); + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); else - dbg("%s - read OK !", __func__); + dev_dbg(&port->dev, "%s - read OK !\n", __func__); return status; } @@ -357,9 +348,9 @@ static int iuu_led(struct usb_serial_port *port, unsigned int R, status = bulk_immediate(port, buf, 8); kfree(buf); if (status != IUU_OPERATION_OK) - dbg("%s - led error status = %2x", __func__, status); + dev_dbg(&port->dev, "%s - led error status = %2x\n", __func__, status); else - dbg("%s - led OK !", __func__); + dev_dbg(&port->dev, "%s - led OK !\n", __func__); return IUU_OPERATION_OK; } @@ -445,7 +436,7 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) status = bulk_immediate(port, (u8 *) priv->buf, Count); if (status != 0) { - dbg("%s - write error ", __func__); + dev_dbg(&port->dev, "%s - write error\n", __func__); return status; } } else if (frq == 3579000) { @@ -554,12 +545,13 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) status = bulk_immediate(port, (u8 *) priv->buf, Count); if (status != IUU_OPERATION_OK) - dbg("%s - write error ", __func__); + dev_dbg(&port->dev, "%s - write error\n", __func__); return status; } static int iuu_uart_flush(struct usb_serial_port *port) { + struct device *dev = &port->dev; int i; int status; u8 rxcmd = IUU_UART_RX; @@ -571,27 +563,26 @@ static int iuu_uart_flush(struct usb_serial_port *port) for (i = 0; i < 2; i++) { status = bulk_immediate(port, &rxcmd, 1); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_write error", __func__); + dev_dbg(dev, "%s - uart_flush_write error\n", __func__); return status; } status = read_immediate(port, &priv->len, 1); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_read error", __func__); + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); return status; } if (priv->len > 0) { - dbg("%s - uart_flush datalen is : %i ", __func__, - priv->len); + dev_dbg(dev, "%s - uart_flush datalen is : %i\n", __func__, priv->len); status = read_immediate(port, priv->buf, priv->len); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_flush_read error", __func__); + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); return status; } } } - dbg("%s - uart_flush_read OK!", __func__); + dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__); iuu_led(port, 0, 0xF000, 0, 0xFF); return status; } @@ -610,10 +601,10 @@ static void read_buf_callback(struct urb *urb) return; } - dbg("%s - %i chars to write", __func__, urb->actual_length); + dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length); tty = tty_port_tty_get(&port->port); if (data == NULL) - dbg("%s - data is NULL !!!", __func__); + dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); if (tty && urb->actual_length && data) { tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); @@ -627,7 +618,6 @@ static int iuu_bulk_write(struct usb_serial_port *port) struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; int result; - int i; int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; @@ -640,14 +630,8 @@ static int iuu_bulk_write(struct usb_serial_port *port) buf_len = priv->writelen; priv->writelen = 0; spin_unlock_irqrestore(&priv->lock, flags); - if (debug == 1) { - for (i = 0; i < buf_len; i++) - sprintf(priv->dbgbuf + i*2 , - "%02X", priv->writebuf[i]); - priv->dbgbuf[buf_len+i*2] = 0; - dbg("%s - writing %i chars : %s", __func__, - buf_len, priv->dbgbuf); - } + dev_dbg(&port->dev, "%s - writing %i chars : %*ph\n", __func__, + buf_len, buf_len, buf_ptr); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), @@ -683,18 +667,18 @@ static void iuu_uart_read_callback(struct urb *urb) priv->poll++; if (status) { - dbg("%s - status = %d", __func__, status); + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); /* error stop all */ return; } if (data == NULL) - dbg("%s - data is NULL !!!", __func__); + dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); if (urb->actual_length == 1 && data != NULL) len = (int) data[0]; if (urb->actual_length > 1) { - dbg("%s - urb->actual_length = %i", __func__, + dev_dbg(&port->dev, "%s - urb->actual_length = %i\n", __func__, urb->actual_length); error = 1; return; @@ -702,7 +686,7 @@ static void iuu_uart_read_callback(struct urb *urb) /* if len > 0 call readbuf */ if (len > 0 && error == 0) { - dbg("%s - call read buf - len to read is %i ", + dev_dbg(&port->dev, "%s - call read buf - len to read is %i\n", __func__, len); status = iuu_read_buf(port, len); return; @@ -729,7 +713,7 @@ static void iuu_uart_read_callback(struct urb *urb) } spin_unlock_irqrestore(&priv->lock, flags); /* if nothing to write call again rxcmd */ - dbg("%s - rxcmd recall", __func__); + dev_dbg(&port->dev, "%s - rxcmd recall\n", __func__); iuu_led_activity_off(urb); } @@ -769,7 +753,7 @@ static void read_rxcmd_callback(struct urb *urb) port->read_urb->transfer_buffer, 256, iuu_uart_read_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - dbg("%s - submit result = %d", __func__, result); + dev_dbg(&port->dev, "%s - submit result = %d\n", __func__, result); } static int iuu_uart_on(struct usb_serial_port *port) @@ -789,13 +773,13 @@ static int iuu_uart_on(struct usb_serial_port *port) status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { - dbg("%s - uart_on error", __func__); + dev_dbg(&port->dev, "%s - uart_on error\n", __func__); goto uart_enable_failed; } /* iuu_reset() the card after iuu_uart_on() */ status = iuu_uart_flush(port); if (status != IUU_OPERATION_OK) - dbg("%s - uart_flush error", __func__); + dev_dbg(&port->dev, "%s - uart_flush error\n", __func__); uart_enable_failed: kfree(buf); return status; @@ -813,7 +797,7 @@ static int iuu_uart_off(struct usb_serial_port *port) status = bulk_immediate(port, buf, 1); if (status != IUU_OPERATION_OK) - dbg("%s - uart_off error", __func__); + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); kfree(buf); return status; @@ -830,7 +814,7 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, u8 T1reload = 0; unsigned int T1FrekvensHZ = 0; - dbg("%s - enter baud_base=%d", __func__, baud_base); + dev_dbg(&port->dev, "%s - enter baud_base=%d\n", __func__, baud_base); dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL); if (!dataout) @@ -911,7 +895,7 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, status = bulk_immediate(port, dataout, DataCount); if (status != IUU_OPERATION_OK) - dbg("%s - uart_off error", __func__); + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); kfree(dataout); return status; } @@ -921,7 +905,7 @@ static void iuu_set_termios(struct tty_struct *tty, { const u32 supported_mask = CMSPAR|PARENB|PARODD; struct iuu_private *priv = usb_get_serial_port_data(port); - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; int status; u32 actual; u32 parity; @@ -930,9 +914,9 @@ static void iuu_set_termios(struct tty_struct *tty, u32 newval = cflag & supported_mask; /* Just use the ospeed. ispeed should be the same. */ - baud = tty->termios->c_ospeed; + baud = tty->termios.c_ospeed; - dbg("%s - enter c_ospeed or baud=%d", __func__, baud); + dev_dbg(&port->dev, "%s - enter c_ospeed or baud=%d\n", __func__, baud); /* compute the parity parameter */ parity = 0; @@ -961,13 +945,13 @@ static void iuu_set_termios(struct tty_struct *tty, * settings back over and then adjust them */ if (old_termios) - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); if (status != 0) /* Set failed - return old bits */ return; /* Re-encode speed, parity and csize */ tty_encode_baud_rate(tty, baud, baud); - tty->termios->c_cflag &= ~(supported_mask|CSIZE); - tty->termios->c_cflag |= newval | csize; + tty->termios.c_cflag &= ~(supported_mask|CSIZE); + tty->termios.c_cflag |= newval | csize; } static void iuu_close(struct usb_serial_port *port) @@ -983,7 +967,7 @@ static void iuu_close(struct usb_serial_port *port) if (serial->dev) { /* free writebuf */ /* shutdown our urbs */ - dbg("%s - shutting down urbs", __func__); + dev_dbg(&port->dev, "%s - shutting down urbs\n", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -993,31 +977,32 @@ static void iuu_close(struct usb_serial_port *port) static void iuu_init_termios(struct tty_struct *tty) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 + tty->termios = tty_std_termios; + tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600 | TIOCM_CTS | CSTOPB | PARENB; - tty->termios->c_ispeed = 9600; - tty->termios->c_ospeed = 9600; - tty->termios->c_lflag = 0; - tty->termios->c_oflag = 0; - tty->termios->c_iflag = 0; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; + tty->termios.c_lflag = 0; + tty->termios.c_oflag = 0; + tty->termios.c_iflag = 0; } static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; + struct device *dev = &port->dev; u8 *buf; int result; int baud; u32 actual; struct iuu_private *priv = usb_get_serial_port_data(port); - baud = tty->termios->c_ospeed; - tty->termios->c_ispeed = baud; + baud = tty->termios.c_ospeed; + tty->termios.c_ispeed = baud; /* Re-encode speed */ tty_encode_baud_rate(tty, baud, baud); - dbg("%s - port %d, baud %d", __func__, port->number, baud); + dev_dbg(dev, "%s - baud %d\n", __func__, baud); usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -1032,14 +1017,14 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) result = usb_control_msg(port->serial->dev, \ usb_rcvctrlpipe(port->serial->dev, 0), \ b, a, c, d, buf, 1, 1000); \ - dbg("0x%x:0x%x:0x%x:0x%x %d - %x", a, b, c, d, result, \ + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", a, b, c, d, result, \ buf[0]); } while (0); #define SOUP(a, b, c, d) do { \ result = usb_control_msg(port->serial->dev, \ usb_sndctrlpipe(port->serial->dev, 0), \ b, a, c, d, NULL, 0, 1000); \ - dbg("0x%x:0x%x:0x%x:0x%x %d", a, b, c, d, result); } while (0) + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d\n", a, b, c, d, result); } while (0) /* This is not UART related but IUU USB driver related or something */ /* like that. Basically no IUU will accept any commands from the USB */ @@ -1119,7 +1104,7 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) iuu_uart_flush(port); - dbg("%s - initialization done", __func__); + dev_dbg(dev, "%s - initialization done\n", __func__); memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); usb_fill_bulk_urb(port->write_urb, port->serial->dev, @@ -1129,11 +1114,10 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) read_rxcmd_callback, port); result = usb_submit_urb(port->write_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting read urb," - " error %d\n", __func__, result); + dev_err(dev, "%s - failed submitting read urb, error %d\n", __func__, result); iuu_close(port); } else { - dbg("%s - rxcmd OK", __func__); + dev_dbg(dev, "%s - rxcmd OK\n", __func__); } return result; @@ -1159,9 +1143,9 @@ static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) kfree(buf); if (status != IUU_OPERATION_OK) - dbg("%s - vcc error status = %2x", __func__, status); + dev_dbg(&port->dev, "%s - vcc error status = %2x\n", __func__, status); else - dbg("%s - vcc OK !", __func__); + dev_dbg(&port->dev, "%s - vcc OK !\n", __func__); return status; } @@ -1192,7 +1176,7 @@ static ssize_t store_vcc_mode(struct device *dev, goto fail_store_vcc_mode; } - dbg("%s: setting vcc_mode = %ld", __func__, v); + dev_dbg(dev, "%s: setting vcc_mode = %ld", __func__, v); if ((v != 3) && (v != 5)) { dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); @@ -1257,8 +1241,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION(DRIVER_VERSION); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(xmas, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index af0b70eaf032..29c943d737d0 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -38,15 +38,12 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <linux/firmware.h> -#include <linux/ihex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> #include "keyspan.h" -static bool debug; - /* * Version Information */ @@ -158,14 +155,14 @@ static void keyspan_set_termios(struct tty_struct *tty, p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; device_port = port->number - port->serial->minor; /* Baud rate calculation takes baud rate as an integer so other rates can be generated if desired. */ baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, don't change */ - if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { /* FIXME - more to do here to ensure rate changes cleanly */ /* FIXME - calcuate exact rate from divisor ? */ @@ -179,7 +176,7 @@ static void keyspan_set_termios(struct tty_struct *tty, p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; /* Mark/Space not supported */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; keyspan_send_setup(port, 0); } @@ -241,8 +238,8 @@ static int keyspan_write(struct tty_struct *tty, dataOffset = 1; } - dbg("%s - for port %d (%d chars), flip=%d", - __func__, port->number, count, p_priv->out_flip); + dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n", + __func__, port->number, count, p_priv->out_flip); for (left = count; left > 0; left -= todo) { todo = left; @@ -255,11 +252,11 @@ static int keyspan_write(struct tty_struct *tty, this_urb = p_priv->out_urbs[flip]; if (this_urb == NULL) { /* no bulk out, so return 0 bytes written */ - dbg("%s - no output urb :(", __func__); + dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); return count; } - dbg("%s - endpoint %d flip %d", + dev_dbg(&port->dev, "%s - endpoint %d flip %d\n", __func__, usb_pipeendpoint(this_urb->pipe), flip); if (this_urb->status == -EINPROGRESS) { @@ -282,7 +279,7 @@ static int keyspan_write(struct tty_struct *tty, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("usb_submit_urb(write bulk) failed (%d)", err); + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); p_priv->tx_start_time[flip] = jiffies; /* Flip for next time if usa26 or usa28 interface @@ -305,8 +302,8 @@ static void usa26_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", - __func__, status, endpoint); + dev_dbg(&urb->dev->dev,"%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); return; } @@ -325,7 +322,7 @@ static void usa26_indat_callback(struct urb *urb) tty_insert_flip_char(tty, data[i], err); } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __func__); + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -345,7 +342,7 @@ static void usa26_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } /* Outdat handling is common for all devices */ @@ -356,7 +353,7 @@ static void usa2x_outdat_callback(struct urb *urb) port = urb->context; p_priv = usb_get_serial_port_data(port); - dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); usb_serial_port_softint(port); } @@ -374,7 +371,7 @@ static void usa26_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -394,20 +391,22 @@ static void usa26_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != 9) { - dbg("%s - %d byte report??", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); goto exit; } msg = (struct keyspan_usa26_portStatusMessage *)data; #if 0 - dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", - __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff, - msg->_txXoff, msg->rxEnabled, msg->controlResponse); + dev_dbg(&urb->dev->dev, + "%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", + __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, + msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled, + msg->controlResponse); #endif /* Now do something useful with the data */ @@ -415,7 +414,7 @@ static void usa26_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -438,7 +437,7 @@ static void usa26_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -465,8 +464,8 @@ static void usa28_indat_callback(struct urb *urb) do { if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", - __func__, status, usb_pipeendpoint(urb->pipe)); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, usb_pipeendpoint(urb->pipe)); return; } @@ -484,7 +483,7 @@ static void usa28_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); p_priv->in_flip ^= 1; @@ -505,7 +504,7 @@ static void usa28_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -526,25 +525,28 @@ static void usa28_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); goto exit; } - /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__ - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10], data[11]);*/ + /* + dev_dbg(&urb->dev->dev, + "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__, + data[0], data[1], data[2], data[3], data[4], data[5], + data[6], data[7], data[8], data[9], data[10], data[11]); + */ /* Now do something useful with the data */ msg = (struct keyspan_usa28_portStatusMessage *)data; /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); goto exit; } port = serial->port[msg->port]; @@ -567,7 +569,7 @@ static void usa28_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -589,7 +591,7 @@ static void usa49_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -613,27 +615,29 @@ static void usa49_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); goto exit; } - /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__, - data[0], data[1], data[2], data[3], data[4], data[5], - data[6], data[7], data[8], data[9], data[10]);*/ + /* + dev_dbg(&urb->dev->dev, "%s: %x %x %x %x %x %x %x %x %x %x %x", + __func__, data[0], data[1], data[2], data[3], data[4], + data[5], data[6], data[7], data[8], data[9], data[10]); + */ /* Now do something useful with the data */ msg = (struct keyspan_usa49_portStatusMessage *)data; /* Check port number from message and retrieve private data */ if (msg->portNumber >= serial->num_ports) { - dbg("%s - Unexpected port number %d", - __func__, msg->portNumber); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, msg->portNumber); goto exit; } port = serial->port[msg->portNumber]; @@ -656,7 +660,7 @@ static void usa49_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -676,8 +680,8 @@ static void usa49_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", __func__, - status, endpoint); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); return; } @@ -710,7 +714,7 @@ static void usa49_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } static void usa49wg_indat_callback(struct urb *urb) @@ -725,7 +729,7 @@ static void usa49wg_indat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } @@ -738,7 +742,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Check port number from message*/ if (data[i] >= serial->num_ports) { - dbg("%s - Unexpected port number %d", + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, data[i]); return; } @@ -778,7 +782,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } /* not used, usa-49 doesn't have per-port control endpoints */ @@ -799,7 +803,7 @@ static void usa90_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dbg("%s - nonzero status: %x on endpoint %d.", + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", __func__, status, endpoint); return; } @@ -828,7 +832,7 @@ static void usa90_indat_callback(struct urb *urb) err); } else { /* some bytes had errors, every byte has status */ - dbg("%s - RX error!!!!", __func__); + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { int stat = data[i], flag = 0; if (stat & RXERROR_OVERRUN) @@ -850,7 +854,7 @@ static void usa90_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } @@ -868,11 +872,11 @@ static void usa90_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length < 14) { - dbg("%s - %d byte report??", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); goto exit; } @@ -900,7 +904,7 @@ static void usa90_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); exit: ; } @@ -914,7 +918,7 @@ static void usa90_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1); } @@ -935,13 +939,13 @@ static void usa67_instat_callback(struct urb *urb) serial = urb->context; if (status) { - dbg("%s - nonzero status: %x", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); return; } if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) { - dbg("%s - bad length %d", __func__, urb->actual_length); + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); return; } @@ -951,7 +955,7 @@ static void usa67_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg("%s - Unexpected port number %d", __func__, msg->port); + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); return; } @@ -973,7 +977,7 @@ static void usa67_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); if (err != 0) - dbg("%s - resubmit read urb failed. (%d)", __func__, err); + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); } static void usa67_glocont_callback(struct urb *urb) @@ -989,7 +993,7 @@ static void usa67_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg("%s - sending setup", __func__); + dev_dbg(&port->dev, "%s - sending setup\n", __func__); keyspan_usa67_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -1068,8 +1072,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(urb->dev, urb->pipe); err = usb_submit_urb(urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit urb %d failed (%d)", - __func__, i, err); + dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); } /* Reset low level data toggle on out endpoints */ @@ -1086,13 +1089,13 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) device_port = port->number - port->serial->minor; if (tty) { - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; /* Baud rate calculation takes baud rate as an integer so other rates can be generated if desired. */ baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, leave as default */ if (baud_rate >= 0 - && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { p_priv->baud = baud_rate; } @@ -1142,7 +1145,7 @@ static void keyspan_close(struct usb_serial_port *port) } /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dbg("%s - urb in progress", __func__); + dev_dbg(&port->dev, "%s - urb in progress\n", __func__); }*/ p_priv->out_flip = 0; @@ -1162,18 +1165,15 @@ static void keyspan_close(struct usb_serial_port *port) /* download the firmware to a pre-renumeration device */ static int keyspan_fake_startup(struct usb_serial *serial) { - int response; - const struct ihex_binrec *record; - char *fw_name; - const struct firmware *fw; + char *fw_name; - dbg("Keyspan startup version %04x product %04x", - le16_to_cpu(serial->dev->descriptor.bcdDevice), - le16_to_cpu(serial->dev->descriptor.idProduct)); + dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", + le16_to_cpu(serial->dev->descriptor.bcdDevice), + le16_to_cpu(serial->dev->descriptor.idProduct)); if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) != 0x8000) { - dbg("Firmware already loaded. Quitting."); + dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); return 1; } @@ -1233,34 +1233,16 @@ static int keyspan_fake_startup(struct usb_serial *serial) return 1; } - if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) { - dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name); - return 1; - } - - dbg("Uploading Keyspan %s firmware.", fw_name); + dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); - /* download the firmware image */ - response = ezusb_set_reset(serial, 1); - - record = (const struct ihex_binrec *)fw->data; - - while (record) { - response = ezusb_writememory(serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n", - response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { + dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", + fw_name); + return -ENOENT; } - release_firmware(fw); - /* bring device out of reset. Renumeration will occur in a - moment and the new device will bind to the real driver */ - response = ezusb_set_reset(serial, 0); + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ /* we don't want this device to have a driver assigned to it. */ return 1; @@ -1296,10 +1278,10 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, if (endpoint == -1) return NULL; /* endpoint not needed */ - dbg("%s - alloc for endpoint %d.", __func__, endpoint); + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s - alloc for endpoint %d failed.", __func__, endpoint); + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint); return NULL; } @@ -1332,7 +1314,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, return NULL; } - dbg("%s - using urb %p for %s endpoint %x", + dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", __func__, urb, ep_type_name, endpoint); return urb; } @@ -1464,14 +1446,15 @@ static void keyspan_setup_urbs(struct usb_serial *serial) } /* usa19 function doesn't require prescaler */ -static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, +static int keyspan_usa19_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero... */ b16 = baud_rate * 16L; @@ -1498,19 +1481,20 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); if (rate_low && rate_hi) - dbg("%s - %d %02x %02x.", + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", __func__, baud_rate, *rate_hi, *rate_low); return KEYSPAN_BAUD_RATE_OK; } /* usa19hs function doesn't require prescaler */ -static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, - u8 *rate_low, u8 *prescaler, int portnum) +static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div; /* divisor */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero... */ b16 = baud_rate * 16L; @@ -1533,13 +1517,14 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (rate_low && rate_hi) - dbg("%s - %d %02x %02x.", + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", __func__, baud_rate, *rate_hi, *rate_low); return KEYSPAN_BAUD_RATE_OK; } -static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, +static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ @@ -1551,7 +1536,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 best_prescaler; int i; - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero */ b16 = baud_rate * 16L; @@ -1596,20 +1581,21 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_hi = (u8) ((div >> 8) & 0xff); if (prescaler) { *prescaler = best_prescaler; - /* dbg("%s - %d %d", __func__, *prescaler, div); */ + /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ } return KEYSPAN_BAUD_RATE_OK; } /* USA-28 supports different maximum baud rates on each port */ -static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, - u8 *rate_low, u8 *prescaler, int portnum) +static int keyspan_usa28_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg("%s - %d.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); /* prevent divide by zero */ b16 = baud_rate * 16L; @@ -1642,7 +1628,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, *rate_low = (u8) (cnt & 0xff); if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); - dbg("%s - %d OK.", __func__, baud_rate); + dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); return KEYSPAN_BAUD_RATE_OK; } @@ -1658,7 +1644,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg("%s reset=%d", __func__, reset_port); + dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1668,11 +1654,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; - dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -1681,7 +1667,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -1692,11 +1678,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -1790,12 +1776,12 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ + outcont_urb, this_urb->transfer_buffer_length, + usb_pipeendpoint(this_urb->pipe)); } #endif @@ -1821,7 +1807,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -1830,7 +1816,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg("%s already writing", __func__); + dev_dbg(&port->dev, "%s already writing\n", __func__); mdelay(5); return -1; } @@ -1838,9 +1824,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); msg.setBaudRate = 1; - if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, - &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate requested %d.", + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, NULL, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", __func__, p_priv->baud); msg.baudLo = 0xff; msg.baudHi = 0xb2; /* Values for 9600 baud */ @@ -1915,10 +1902,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed", __func__); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); #if 0 else { - dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__, + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) OK %d bytes\n", __func__, this_urb->transfer_buffer_length); } #endif @@ -1949,13 +1936,13 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __func__, port->number); + dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); return -1; } - dbg("%s - endpoint %d port %d (%d)", - __func__, usb_pipeendpoint(this_urb->pipe), - port->number, device_port); + dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n", + __func__, usb_pipeendpoint(this_urb->pipe), + port->number, device_port); /* Save reset port val for resend. Don't overwrite resend for open/close condition. */ @@ -1963,7 +1950,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -1977,11 +1964,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2100,12 +2087,12 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, } err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); #if 0 else { - dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__, - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); + dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__, + outcont_urb, this_urb->transfer_buffer_length, + usb_pipeendpoint(this_urb->pipe)); } #endif @@ -2131,7 +2118,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, /* only do something if we have a bulk out endpoint */ this_urb = p_priv->outcont_urb; if (this_urb == NULL) { - dbg("%s - oops no urb.", __func__); + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } @@ -2140,7 +2127,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg("%s already writing", __func__); + dev_dbg(&port->dev, "%s already writing\n", __func__); mdelay(5); return -1; } @@ -2151,13 +2138,12 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0x01; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); p_priv->baud = 9600; - d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, + d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &prescaler, 0); } msg.setRxMode = 1; @@ -2239,7 +2225,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); return 0; } @@ -2265,7 +2251,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, /* Make sure we have an urb then send the message */ if (this_urb == NULL) { - dbg("%s - oops no urb for port %d.", __func__, + dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number); return -1; } @@ -2275,7 +2261,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg("%s - already writing", __func__); */ + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ mdelay(5); return -1; } @@ -2288,11 +2274,11 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; - if (d_details->calculate_baud_rate - (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { - dbg("%s - Invalid baud rate %d requested, using 9600.", - __func__, p_priv->baud); + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2383,8 +2369,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) - dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, - err); + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); return 0; } @@ -2440,8 +2425,7 @@ static int keyspan_startup(struct usb_serial *serial) /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); if (!s_priv) { - dbg("%s - kmalloc for keyspan_serial_private failed.", - __func__); + dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__); return -ENOMEM; } @@ -2454,7 +2438,7 @@ static int keyspan_startup(struct usb_serial *serial) p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL); if (!p_priv) { - dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); + dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i); return 1; } p_priv->device_details = d_details; @@ -2466,14 +2450,12 @@ static int keyspan_startup(struct usb_serial *serial) if (s_priv->instat_urb != NULL) { err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit instat urb failed %d", __func__, - err); + dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err); } if (s_priv->indat_urb != NULL) { err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); if (err != 0) - dbg("%s - submit indat urb failed %d", __func__, - err); + dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err); } return 0; @@ -2527,10 +2509,8 @@ static void keyspan_release(struct usb_serial *serial) s_priv = usb_get_serial_data(serial); - /* dbg("Freeing serial->private."); */ kfree(s_priv); - /* dbg("Freeing port->private."); */ /* Now free per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -2554,7 +2534,3 @@ MODULE_FIRMWARE("keyspan/usa18x.fw"); MODULE_FIRMWARE("keyspan/usa19w.fw"); MODULE_FIRMWARE("keyspan/usa49w.fw"); MODULE_FIRMWARE("keyspan/usa49wlc.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index fe1c5d91692c..0a8a40b5711e 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -64,19 +64,23 @@ static int keyspan_tiocmset (struct tty_struct *tty, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); -static int keyspan_usa19_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19w_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19w_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa28_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa28_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19hs_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); @@ -188,8 +192,9 @@ struct keyspan_device_details { /* Endpoint used for global control functions */ int glocont_endpoint; - int (*calculate_baud_rate) (u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); + int (*calculate_baud_rate) (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); u32 baudclk; }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a4ac3cfeffc4..ca43ecb4a2bd 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -25,13 +25,10 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/workqueue.h> -#include <linux/firmware.h> -#include <linux/ihex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> - -static bool debug; +#include <linux/usb/ezusb.h> /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) @@ -137,8 +134,8 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) 0, 2000); if (result < 0) - dbg("%s - error %d from usb_control_msg", - __func__, result); + dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n", + __func__, result); } @@ -160,12 +157,10 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -183,7 +178,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) break; case 1: /* status interrupt */ - dbg(" rx int, d1=%d, d2=%d", data[1], data[2]); + dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]); switch (data[1]) { case 1: /* modemline change */ break; @@ -229,7 +224,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) /* just restart the receive interrupt URB */ if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) - dbg(" usb_submit_urb(read urb) failed"); + dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n"); } @@ -308,8 +303,8 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state) USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, value, 0, NULL, 0, 2000); if (result < 0) - dbg("%s - error %d from usb_control_msg", - __func__, result); + dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n", + __func__, result); /* there is something funky about this.. the TCSBRK that 'cu' performs ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4 seconds apart, but it feels like the break sent isn't as long as it @@ -338,7 +333,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty, 7[EOMS]1: 10 bit, b0/b7 is parity 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?) - HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS + HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS bit. For now, just do baud. */ @@ -347,13 +342,13 @@ static void keyspan_pda_set_termios(struct tty_struct *tty, speed = keyspan_pda_setbaud(serial, speed); if (speed == 0) { - dbg("can't handle requested baud rate"); + dev_dbg(&port->dev, "can't handle requested baud rate\n"); /* It hasn't changed so.. */ speed = tty_termios_baud_rate(old_termios); } /* Only speed can change so copy the old h/w parameters then encode the new speed */ - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); tty_encode_baud_rate(tty, speed, speed); } @@ -459,7 +454,7 @@ static int keyspan_pda_write(struct tty_struct *tty, Block if we can't write anything at all, otherwise write as much as we can. */ if (count == 0) { - dbg(" write request of 0 bytes"); + dev_dbg(&port->dev, "write request of 0 bytes\n"); return 0; } @@ -505,16 +500,16 @@ static int keyspan_pda_write(struct tty_struct *tty, 1, 2000); if (rc > 0) { - dbg(" roomquery says %d", *room); + dev_dbg(&port->dev, "roomquery says %d\n", *room); priv->tx_room = *room; } kfree(room); if (rc < 0) { - dbg(" roomquery failed"); + dev_dbg(&port->dev, "roomquery failed\n"); goto exit; } if (rc == 0) { - dbg(" roomquery returned 0 bytes"); + dev_dbg(&port->dev, "roomquery returned 0 bytes\n"); rc = -EIO; /* device didn't return any data */ goto exit; } @@ -536,7 +531,7 @@ static int keyspan_pda_write(struct tty_struct *tty, rc = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (rc) { - dbg(" usb_submit_urb(write bulk) failed"); + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n"); goto exit; } } else { @@ -639,11 +634,11 @@ static int keyspan_pda_open(struct tty_struct *tty, 1, 2000); if (rc < 0) { - dbg("%s - roomquery failed", __func__); + dev_dbg(&port->dev, "%s - roomquery failed\n", __func__); goto error; } if (rc == 0) { - dbg("%s - roomquery returned 0 bytes", __func__); + dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__); rc = -EIO; goto error; } @@ -654,7 +649,7 @@ static int keyspan_pda_open(struct tty_struct *tty, /*Start reading from the device*/ rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (rc) { - dbg("%s - usb_submit_urb(read int) failed", __func__); + dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__); goto error; } error: @@ -678,11 +673,9 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) { int response; const char *fw_name; - const struct ihex_binrec *record; - const struct firmware *fw; /* download the firmware here ... */ - response = ezusb_set_reset(serial, 1); + response = ezusb_fx1_set_reset(serial->dev, 1); if (0) { ; } #ifdef KEYSPAN @@ -699,30 +692,15 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) __func__); return -ENODEV; } - if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) { + + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", fw_name); return -ENOENT; } - record = (const struct ihex_binrec *)fw->data; - - while (record) { - response = ezusb_writememory(serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "ezusb_writememory failed " - "for Keyspan PDA firmware (%d %04X %p %d)\n", - response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); - } - release_firmware(fw); - /* bring device out of reset. Renumeration will occur in a moment - and the new device will bind to the real driver */ - response = ezusb_set_reset(serial, 0); + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ /* we want this device to fail to have a driver assigned to it. */ return 1; @@ -828,6 +806,3 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 5bed59cd5776..3f6d7376c02d 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -49,8 +49,6 @@ #include <linux/usb/serial.h> #include "kl5kusb105.h" -static bool debug; - /* * Version Information */ @@ -239,7 +237,9 @@ static int klsi_105_startup(struct usb_serial *serial) priv = kmalloc(sizeof(struct klsi_105_private), GFP_KERNEL); if (!priv) { - dbg("%skmalloc for klsi_105_private failed.", __func__); + dev_dbg(&serial->interface->dev, + "%s - kmalloc for klsi_105_private failed.\n", + __func__); i--; goto err_cleanup; } @@ -311,12 +311,12 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) /* set up termios structure */ spin_lock_irqsave(&priv->lock, flags); - priv->termios.c_iflag = tty->termios->c_iflag; - priv->termios.c_oflag = tty->termios->c_oflag; - priv->termios.c_cflag = tty->termios->c_cflag; - priv->termios.c_lflag = tty->termios->c_lflag; + priv->termios.c_iflag = tty->termios.c_iflag; + priv->termios.c_oflag = tty->termios.c_oflag; + priv->termios.c_cflag = tty->termios.c_cflag; + priv->termios.c_lflag = tty->termios.c_lflag; for (i = 0; i < NCCS; i++) - priv->termios.c_cc[i] = tty->termios->c_cc[i]; + priv->termios.c_cc[i] = tty->termios.c_cc[i]; priv->cfg.pktlen = cfg->pktlen; priv->cfg.baudrate = cfg->baudrate; priv->cfg.databits = cfg->databits; @@ -344,14 +344,14 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); retval = rc; } else - dbg("%s - enabled reading", __func__); + dev_dbg(&port->dev, "%s - enabled reading\n", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc >= 0) { spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - read line state 0x%lx", __func__, line_state); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); retval = 0; } else retval = rc; @@ -421,7 +421,7 @@ static void klsi_105_process_read_urb(struct urb *urb) return; if (urb->actual_length <= KLSI_HDR_LEN) { - dbg("%s - malformed packet", __func__); + dev_dbg(&port->dev, "%s - malformed packet\n", __func__); return; } @@ -431,7 +431,7 @@ static void klsi_105_process_read_urb(struct urb *urb) len = get_unaligned_le16(data); if (len > urb->actual_length - KLSI_HDR_LEN) { - dbg("%s - packet length mismatch", __func__); + dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); len = urb->actual_length - KLSI_HDR_LEN; } @@ -445,9 +445,10 @@ static void klsi_105_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); - unsigned int iflag = tty->termios->c_iflag; + struct device *dev = &port->dev; + unsigned int iflag = tty->termios.c_iflag; unsigned int old_iflag = old_termios->c_iflag; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; unsigned int old_cflag = old_termios->c_cflag; struct klsi_105_port_settings *cfg; unsigned long flags; @@ -455,8 +456,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); if (!cfg) { - dev_err(&port->dev, "%s - out of memory for config buffer.\n", - __func__); + dev_err(dev, "%s - out of memory for config buffer.\n", __func__); return; } @@ -471,7 +471,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, if ((cflag & CBAUD) != (old_cflag & CBAUD)) { /* reassert DTR and (maybe) RTS on transition from B0 */ if ((old_cflag & CBAUD) == B0) { - dbg("%s: baud was B0", __func__); + dev_dbg(dev, "%s: baud was B0\n", __func__); #if 0 priv->control_state |= TIOCM_DTR; /* don't set RTS if using hardware flow control */ @@ -509,14 +509,13 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->cfg.baudrate = kl5kusb105a_sio_b115200; break; default: - dbg("KLSI USB->Serial converter:" - " unsupported baudrate request, using default of 9600"); - priv->cfg.baudrate = kl5kusb105a_sio_b9600; + dev_dbg(dev, "KLSI USB->Serial converter: unsupported baudrate request, using default of 9600"); + priv->cfg.baudrate = kl5kusb105a_sio_b9600; baud = 9600; break; } if ((cflag & CBAUD) == B0) { - dbg("%s: baud is B0", __func__); + dev_dbg(dev, "%s: baud is B0\n", __func__); /* Drop RTS and DTR */ /* maybe this should be simulated by sending read * disable and read enable messages? @@ -533,11 +532,11 @@ static void klsi_105_set_termios(struct tty_struct *tty, /* set the number of data bits */ switch (cflag & CSIZE) { case CS5: - dbg("%s - 5 bits/byte not supported", __func__); + dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto err; case CS6: - dbg("%s - 6 bits/byte not supported", __func__); + dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto err; case CS7: @@ -547,8 +546,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->cfg.databits = kl5kusb105a_dtb_8; break; default: - dev_err(&port->dev, - "CSIZE was not CS5-CS8, using default of 8\n"); + dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n"); priv->cfg.databits = kl5kusb105a_dtb_8; break; } @@ -560,7 +558,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { /* Not currently supported */ - tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB); + tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB); #if 0 priv->last_lcr = 0; @@ -587,7 +585,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, || (iflag & IXON) != (old_iflag & IXON) || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { /* Not currently supported */ - tty->termios->c_cflag &= ~CRTSCTS; + tty->termios.c_cflag &= ~CRTSCTS; /* Drop DTR/RTS if no flow control otherwise assert */ #if 0 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) @@ -616,7 +614,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) (struct mct_u232_private *)port->private; unsigned char lcr = priv->last_lcr; - dbg("%sstate=%d", __func__, break_state); + dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state); /* LOCKING */ if (break_state) @@ -645,7 +643,7 @@ static int klsi_105_tiocmget(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - read line state 0x%lx", __func__, line_state); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); return (int)line_state; } @@ -681,6 +679,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "enable extensive debugging messages"); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fafeabb64c55..5c4d2fbd4e11 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,8 +38,6 @@ #include <linux/ioctl.h> #include "kobil_sct.h" -static bool debug; - /* Version Information */ #define DRIVER_VERSION "21/05/2004" #define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com" @@ -139,17 +137,16 @@ static int kobil_startup(struct usb_serial *serial) switch (priv->device_type) { case KOBIL_ADAPTER_B_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL B1 PRO / KAAN PRO detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL B1 PRO / KAAN PRO detected\n"); break; case KOBIL_ADAPTER_K_PRODUCT_ID: - printk(KERN_DEBUG - "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); break; case KOBIL_USBTWIN_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL USBTWIN detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL USBTWIN detected\n"); break; case KOBIL_KAAN_SIM_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL KAAN SIM detected\n"); + dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n"); break; } usb_set_serial_port_data(serial->port[0], priv); @@ -164,13 +161,15 @@ static int kobil_startup(struct usb_serial *serial) for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; if (usb_endpoint_is_int_out(&endpoint->desc)) { - dbg("%s Found interrupt out endpoint. Address: %d", + dev_dbg(&serial->dev->dev, + "%s Found interrupt out endpoint. Address: %d\n", __func__, endpoint->desc.bEndpointAddress); priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; } if (usb_endpoint_is_int_in(&endpoint->desc)) { - dbg("%s Found interrupt in endpoint. Address: %d", + dev_dbg(&serial->dev->dev, + "%s Found interrupt in endpoint. Address: %d\n", __func__, endpoint->desc.bEndpointAddress); priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; @@ -191,15 +190,16 @@ static void kobil_release(struct usb_serial *serial) static void kobil_init_termios(struct tty_struct *tty) { /* Default to echo off and other sane device settings */ - tty->termios->c_lflag = 0; - tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); - tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF; + tty->termios.c_lflag = 0; + tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); + tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF; /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */ - tty->termios->c_oflag &= ~ONLCR; + tty->termios.c_oflag &= ~ONLCR; } static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct device *dev = &port->dev; int result = 0; struct kobil_private *priv; unsigned char *transfer_buffer; @@ -215,12 +215,10 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) /* allocate write_urb */ if (!port->write_urb) { - dbg("%s - port %d Allocating port->write_urb", - __func__, port->number); + dev_dbg(dev, "%s - Allocating port->write_urb\n", __func__); port->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urb) { - dbg("%s - port %d usb_alloc_urb failed", - __func__, port->number); + dev_dbg(dev, "%s - usb_alloc_urb failed\n", __func__); kfree(transfer_buffer); return -ENOMEM; } @@ -247,10 +245,9 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) transfer_buffer_length, KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_HW_version URB returns: %i", - __func__, port->number, result); - dbg("Harware version: %i.%i.%i", - transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); + dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result); + dev_dbg(dev, "Harware version: %i.%i.%i\n", transfer_buffer[0], + transfer_buffer[1], transfer_buffer[2]); /* get firmware version */ result = usb_control_msg(port->serial->dev, @@ -263,10 +260,9 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) transfer_buffer_length, KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_FW_version URB returns: %i", - __func__, port->number, result); - dbg("Firmware version: %i.%i.%i", - transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); + dev_dbg(dev, "%s - Send get_FW_version URB returns: %i\n", __func__, result); + dev_dbg(dev, "Firmware version: %i.%i.%i\n", transfer_buffer[0], + transfer_buffer[1], transfer_buffer[2]); if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { @@ -282,8 +278,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) 0, KOBIL_TIMEOUT ); - dbg("%s - port %d Send set_baudrate URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send set_baudrate URB returns: %i\n", __func__, result); /* reset all queues */ result = usb_control_msg(port->serial->dev, @@ -296,16 +291,14 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) 0, KOBIL_TIMEOUT ); - dbg("%s - port %d Send reset_all_queues URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send reset_all_queues URB returns: %i\n", __func__, result); } if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { /* start reading (Adapter B 'cause PNP string) */ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - dbg("%s - port %d Send read URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send read URB returns: %i\n", __func__, result); } kfree(transfer_buffer); @@ -333,11 +326,9 @@ static void kobil_read_int_callback(struct urb *urb) struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; -/* char *dbg_data; */ if (status) { - dbg("%s - port %d Read int status not zero: %d", - __func__, port->number, status); + dev_dbg(&port->dev, "%s - Read int status not zero: %d\n", __func__, status); return; } @@ -346,6 +337,8 @@ static void kobil_read_int_callback(struct urb *urb) /* BEGIN DEBUG */ /* + char *dbg_data; + dbg_data = kzalloc((3 * purb->actual_length + 10) * sizeof(char), GFP_KERNEL); if (! dbg_data) { @@ -354,7 +347,7 @@ static void kobil_read_int_callback(struct urb *urb) for (i = 0; i < purb->actual_length; i++) { sprintf(dbg_data +3*i, "%02X ", data[i]); } - dbg(" <-- %s", dbg_data); + dev_dbg(&port->dev, " <-- %s\n", dbg_data); kfree(dbg_data); */ /* END DEBUG */ @@ -365,8 +358,7 @@ static void kobil_read_int_callback(struct urb *urb) tty_kref_put(tty); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - dbg("%s - port %d Send read URB returns: %i", - __func__, port->number, result); + dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); } @@ -384,22 +376,20 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, struct kobil_private *priv; if (count == 0) { - dbg("%s - port %d write request of 0 bytes", - __func__, port->number); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } priv = usb_get_serial_port_data(port); if (count > (KOBIL_BUF_LENGTH - priv->filled)) { - dbg("%s - port %d Error: write request bigger than buffer size", __func__, port->number); + dev_dbg(&port->dev, "%s - Error: write request bigger than buffer size\n", __func__); return -ENOMEM; } /* Copy data to buffer */ memcpy(priv->buf + priv->filled, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, - priv->buf + priv->filled); + usb_serial_debug_data(&port->dev, __func__, count, priv->buf + priv->filled); priv->filled = priv->filled + count; /* only send complete block. TWIN, KAAN SIM and adapter K @@ -432,8 +422,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, priv->cur_pos = priv->cur_pos + length; result = usb_submit_urb(port->write_urb, GFP_NOIO); - dbg("%s - port %d Send write URB returns: %i", - __func__, port->number, result); + dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); todo = priv->filled - priv->cur_pos; if (todo > 0) @@ -448,8 +437,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); - dbg("%s - port %d Send read URB returns: %i", - __func__, port->number, result); + dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); } } return count; @@ -493,8 +481,8 @@ static int kobil_tiocmget(struct tty_struct *tty) transfer_buffer_length, KOBIL_TIMEOUT); - dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x", - __func__, port->number, result, transfer_buffer[0]); + dev_dbg(&port->dev, "%s - Send get_status_line_state URB returns: %i. Statusline: %02x\n", + __func__, result, transfer_buffer[0]); result = 0; if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0) @@ -507,6 +495,7 @@ static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct kobil_private *priv; int result; int dtr = 0; @@ -538,11 +527,9 @@ static int kobil_tiocmset(struct tty_struct *tty, if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) { if (dtr != 0) - dbg("%s - port %d Setting DTR", - __func__, port->number); + dev_dbg(dev, "%s - Setting DTR\n", __func__); else - dbg("%s - port %d Clearing DTR", - __func__, port->number); + dev_dbg(dev, "%s - Clearing DTR\n", __func__); result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), SUSBCRequest_SetStatusLinesOrQueues, @@ -554,11 +541,9 @@ static int kobil_tiocmset(struct tty_struct *tty, KOBIL_TIMEOUT); } else { if (rts != 0) - dbg("%s - port %d Setting RTS", - __func__, port->number); + dev_dbg(dev, "%s - Setting RTS\n", __func__); else - dbg("%s - port %d Clearing RTS", - __func__, port->number); + dev_dbg(dev, "%s - Clearing RTS\n", __func__); result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), SUSBCRequest_SetStatusLinesOrQueues, @@ -569,8 +554,7 @@ static int kobil_tiocmset(struct tty_struct *tty, 0, KOBIL_TIMEOUT); } - dbg("%s - port %d Send set_status_line URB returns: %i", - __func__, port->number, result); + dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result); kfree(transfer_buffer); return (result < 0) ? result : 0; } @@ -581,14 +565,14 @@ static void kobil_set_termios(struct tty_struct *tty, struct kobil_private *priv; int result; unsigned short urb_val = 0; - int c_cflag = tty->termios->c_cflag; + int c_cflag = tty->termios.c_cflag; speed_t speed; priv = usb_get_serial_port_data(port); if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { /* This device doesn't support ioctl calls */ - *tty->termios = *old; + tty_termios_copy_hw(&tty->termios, old); return; } @@ -612,7 +596,7 @@ static void kobil_set_termios(struct tty_struct *tty, urb_val |= SUSBCR_SPASB_EvenParity; } else urb_val |= SUSBCR_SPASB_NoParity; - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; tty_encode_baud_rate(tty, speed, speed); result = usb_control_msg(port->serial->dev, @@ -658,7 +642,8 @@ static int kobil_ioctl(struct tty_struct *tty, KOBIL_TIMEOUT ); - dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result); + dev_dbg(&port->dev, + "%s - Send reset_all_queues (FLUSH) URB returns: %i", __func__, result); kfree(transfer_buffer); return (result < 0) ? -EIO: 0; default: @@ -671,6 +656,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a71fa0aa0406..f3947712e137 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -45,8 +45,6 @@ #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" -static bool debug; - /* * Function prototypes */ @@ -214,7 +212,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, value, rc); else tty_encode_baud_rate(tty, speed, speed); - dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor); + dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor); /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which always sends two extra USB 'device request' messages after the @@ -247,8 +245,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, if (port && C_CRTSCTS(tty)) cts_enable_byte = 1; - dbg("set_baud_rate: send second control message, data = %02X", - cts_enable_byte); + dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n", + cts_enable_byte); buf[0] = cts_enable_byte; rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_CTS_REQUEST, @@ -263,7 +261,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, return rc; } /* mct_u232_set_baud_rate */ -static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) +static int mct_u232_set_line_ctrl(struct usb_serial_port *port, + unsigned char lcr) { int rc; unsigned char *buf; @@ -273,20 +272,19 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) return -ENOMEM; buf[0] = lcr; - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), MCT_U232_SET_LINE_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE, WDR_TIMEOUT); if (rc < 0) - dev_err(&serial->dev->dev, - "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); - dbg("set_line_ctrl: 0x%x", lcr); + dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); + dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr); kfree(buf); return rc; } /* mct_u232_set_line_ctrl */ -static int mct_u232_set_modem_ctrl(struct usb_serial *serial, +static int mct_u232_set_modem_ctrl(struct usb_serial_port *port, unsigned int control_state) { int rc; @@ -304,25 +302,24 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, mcr |= MCT_U232_MCR_RTS; buf[0] = mcr; - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), MCT_U232_SET_MODEM_CTRL_REQUEST, MCT_U232_SET_REQUEST_TYPE, 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, WDR_TIMEOUT); kfree(buf); - dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); + dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr); if (rc < 0) { - dev_err(&serial->dev->dev, - "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); return rc; } return 0; } /* mct_u232_set_modem_ctrl */ -static int mct_u232_get_modem_stat(struct usb_serial *serial, - unsigned char *msr) +static int mct_u232_get_modem_stat(struct usb_serial_port *port, + unsigned char *msr) { int rc; unsigned char *buf; @@ -332,19 +329,18 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, *msr = 0; return -ENOMEM; } - rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), MCT_U232_GET_MODEM_STAT_REQUEST, MCT_U232_GET_REQUEST_TYPE, 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE, WDR_TIMEOUT); if (rc < 0) { - dev_err(&serial->dev->dev, - "Get MODEM STATus failed (error = %d)\n", rc); + dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc); *msr = 0; } else { *msr = buf[0]; } - dbg("get_modem_stat: 0x%x", *msr); + dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr); kfree(buf); return rc; } /* mct_u232_get_modem_stat */ @@ -363,8 +359,8 @@ static void mct_u232_msr_to_icount(struct async_icount *icount, icount->dcd++; } /* mct_u232_msr_to_icount */ -static void mct_u232_msr_to_state(unsigned int *control_state, - unsigned char msr) +static void mct_u232_msr_to_state(struct usb_serial_port *port, + unsigned int *control_state, unsigned char msr) { /* Translate Control Line states */ if (msr & MCT_U232_MSR_DSR) @@ -383,7 +379,7 @@ static void mct_u232_msr_to_state(unsigned int *control_state, *control_state |= TIOCM_CD; else *control_state &= ~TIOCM_CD; - dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state); + dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state); } /* mct_u232_msr_to_state */ /* @@ -454,7 +450,7 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) * either. */ spin_lock_irqsave(&priv->lock, flags); - if (tty && (tty->termios->c_cflag & CBAUD)) + if (tty && (tty->termios.c_cflag & CBAUD)) priv->control_state = TIOCM_DTR | TIOCM_RTS; else priv->control_state = 0; @@ -465,14 +461,14 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) control_state = priv->control_state; last_lcr = priv->last_lcr; spin_unlock_irqrestore(&priv->lock, flags); - mct_u232_set_modem_ctrl(serial, control_state); - mct_u232_set_line_ctrl(serial, last_lcr); + mct_u232_set_modem_ctrl(port, control_state); + mct_u232_set_line_ctrl(port, last_lcr); /* Read modem status and update control state */ - mct_u232_get_modem_stat(serial, &last_msr); + mct_u232_get_modem_stat(port, &last_msr); spin_lock_irqsave(&priv->lock, flags); priv->last_msr = last_msr; - mct_u232_msr_to_state(&priv->control_state, priv->last_msr); + mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); spin_unlock_irqrestore(&priv->lock, flags); retval = usb_submit_urb(port->read_urb, GFP_KERNEL); @@ -512,7 +508,7 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); control_state = priv->control_state; spin_unlock_irq(&priv->lock); - mct_u232_set_modem_ctrl(port->serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } mutex_unlock(&port->serial->disc_mutex); } @@ -532,7 +528,6 @@ static void mct_u232_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct mct_u232_private *priv = usb_get_serial_port_data(port); - struct usb_serial *serial = port->serial; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int retval; @@ -547,22 +542,16 @@ static void mct_u232_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } - if (!serial) { - dbg("%s - bad serial pointer, exiting", __func__); - return; - } - - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); /* * Work-a-round: handle the 'usual' bulk-in pipe here @@ -588,7 +577,7 @@ static void mct_u232_read_int_callback(struct urb *urb) priv->last_msr = data[MCT_U232_MSR_INDEX]; /* Record Control Line states */ - mct_u232_msr_to_state(&priv->control_state, priv->last_msr); + mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); mct_u232_msr_to_icount(&priv->icount, priv->last_msr); @@ -634,7 +623,7 @@ static void mct_u232_set_termios(struct tty_struct *tty, { struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned long flags; @@ -656,18 +645,18 @@ static void mct_u232_set_termios(struct tty_struct *tty, /* reassert DTR and RTS on transition from B0 */ if ((old_cflag & CBAUD) == B0) { - dbg("%s: baud was B0", __func__); + dev_dbg(&port->dev, "%s: baud was B0\n", __func__); control_state |= TIOCM_DTR | TIOCM_RTS; - mct_u232_set_modem_ctrl(serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty)); if ((cflag & CBAUD) == B0) { - dbg("%s: baud is B0", __func__); + dev_dbg(&port->dev, "%s: baud is B0\n", __func__); /* Drop RTS and DTR */ control_state &= ~(TIOCM_DTR | TIOCM_RTS); - mct_u232_set_modem_ctrl(serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } /* @@ -704,7 +693,7 @@ static void mct_u232_set_termios(struct tty_struct *tty, last_lcr |= (cflag & CSTOPB) ? MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; - mct_u232_set_line_ctrl(serial, last_lcr); + mct_u232_set_line_ctrl(port, last_lcr); /* save off the modified port settings */ spin_lock_irqsave(&priv->lock, flags); @@ -716,7 +705,6 @@ static void mct_u232_set_termios(struct tty_struct *tty, static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned char lcr; unsigned long flags; @@ -728,7 +716,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) lcr |= MCT_U232_SET_BREAK; spin_unlock_irqrestore(&priv->lock, flags); - mct_u232_set_line_ctrl(serial, lcr); + mct_u232_set_line_ctrl(port, lcr); } /* mct_u232_break_ctl */ @@ -750,7 +738,6 @@ static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned int control_state; unsigned long flags; @@ -769,7 +756,7 @@ static int mct_u232_tiocmset(struct tty_struct *tty, priv->control_state = control_state; spin_unlock_irqrestore(&priv->lock, flags); - return mct_u232_set_modem_ctrl(serial, control_state); + return mct_u232_set_modem_ctrl(port, control_state); } static void mct_u232_throttle(struct tty_struct *tty) @@ -784,7 +771,7 @@ static void mct_u232_throttle(struct tty_struct *tty) priv->control_state &= ~TIOCM_RTS; control_state = priv->control_state; spin_unlock_irq(&priv->lock); - (void) mct_u232_set_modem_ctrl(port->serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } else { spin_unlock_irq(&priv->lock); } @@ -802,7 +789,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty) priv->control_state |= TIOCM_RTS; control_state = priv->control_state; spin_unlock_irq(&priv->lock); - (void) mct_u232_set_modem_ctrl(port->serial, control_state); + mct_u232_set_modem_ctrl(port, control_state); } else { spin_unlock_irq(&priv->lock); } @@ -817,13 +804,13 @@ static int mct_u232_ioctl(struct tty_struct *tty, struct async_icount cnow, cprev; unsigned long flags; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT", __func__); spin_lock_irqsave(&mct_u232_port->lock, flags); cprev = mct_u232_port->icount; @@ -879,8 +866,8 @@ static int mct_u232_get_icount(struct tty_struct *tty, spin_unlock_irqrestore(&mct_u232_port->lock, flags); - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", - __func__, port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", + __func__, icount->rx, icount->tx); return 0; } @@ -889,6 +876,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index d47eb06fe463..0b257ddffbdb 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -52,9 +52,6 @@ static struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -/* Input parameter constants. */ -static bool debug; - /* UNI-Directional mode commands for device configure */ #define UNI_CMD_OPEN 0x80 #define UNI_CMD_CLOSE 0xFF @@ -130,12 +127,6 @@ static void metrousb_read_int_callback(struct urb *urb) /* Set the data read from the usb port into the serial port buffer. */ tty = tty_port_tty_get(&port->port); - if (!tty) { - dev_err(&port->dev, "%s - bad tty pointer - exiting\n", - __func__); - return; - } - if (tty && urb->actual_length) { /* Loop through the data copying each byte to the tty layer. */ tty_insert_flip_string(tty, data, urb->actual_length); @@ -442,7 +433,3 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Philip Nicastro"); MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>"); MODULE_DESCRIPTION(DRIVER_DESC); - -/* Module input parameters */ -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Print debug info (bool 1=on, 0=off)"); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index a07dd3c8cfef..1bf1ad066666 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -71,8 +71,6 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static bool debug; - static struct usb_serial_driver moschip7720_2port_driver; #define USB_VENDOR_ID_MOSCHIP 0x9710 @@ -281,16 +279,19 @@ static void send_deferred_urbs(unsigned long _mos_parport) int ret_val; unsigned long flags; struct mos7715_parport *mos_parport = (void *)_mos_parport; - struct urbtracker *urbtrack; + struct urbtracker *urbtrack, *tmp; struct list_head *cursor, *next; + struct device *dev; /* if release function ran, game over */ if (unlikely(mos_parport->serial == NULL)) return; + dev = &mos_parport->serial->dev->dev; + /* try again to get the mutex */ if (!mutex_trylock(&mos_parport->serial->disc_mutex)) { - dbg("%s: rescheduling tasklet", __func__); + dev_dbg(dev, "%s: rescheduling tasklet\n", __func__); tasklet_schedule(&mos_parport->urb_tasklet); return; } @@ -305,20 +306,19 @@ static void send_deferred_urbs(unsigned long _mos_parport) if (list_empty(&mos_parport->deferred_urbs)) { spin_unlock_irqrestore(&mos_parport->listlock, flags); mutex_unlock(&mos_parport->serial->disc_mutex); - dbg("%s: deferred_urbs list empty", __func__); + dev_dbg(dev, "%s: deferred_urbs list empty\n", __func__); return; } /* move contents of deferred_urbs list to active_urbs list and submit */ list_for_each_safe(cursor, next, &mos_parport->deferred_urbs) list_move_tail(cursor, &mos_parport->active_urbs); - list_for_each_entry(urbtrack, &mos_parport->active_urbs, + list_for_each_entry_safe(urbtrack, tmp, &mos_parport->active_urbs, urblist_entry) { ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC); - dbg("%s: urb submitted", __func__); + dev_dbg(dev, "%s: urb submitted\n", __func__); if (ret_val) { - dev_err(&mos_parport->serial->dev->dev, - "usb_submit_urb() failed: %d", ret_val); + dev_err(dev, "usb_submit_urb() failed: %d\n", ret_val); list_del(&urbtrack->urblist_entry); kref_put(&urbtrack->ref_count, destroy_urbtracker); } @@ -334,7 +334,7 @@ static void async_complete(struct urb *urb) int status = urb->status; if (unlikely(status)) - dbg("%s - nonzero urb status received: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); /* remove the urbtracker from the active_urbs list */ spin_lock(&urbtrack->mos_parport->listlock); @@ -389,7 +389,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, &mos_parport->deferred_urbs); spin_unlock_irqrestore(&mos_parport->listlock, flags); tasklet_schedule(&mos_parport->urb_tasklet); - dbg("tasklet scheduled"); + dev_dbg(&usbdev->dev, "tasklet scheduled"); return 0; } @@ -690,7 +690,7 @@ static int mos7715_parport_init(struct usb_serial *serial) /* allocate and initialize parallel port control struct */ mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL); if (mos_parport == NULL) { - dbg("mos7715_parport_init: kzalloc failed"); + dev_dbg(&serial->dev->dev, "%s: kzalloc failed\n", __func__); return -ENOMEM; } mos_parport->msg_pending = false; @@ -743,6 +743,7 @@ static void mos7720_interrupt_callback(struct urb *urb) int result; int length; int status = urb->status; + struct device *dev = &urb->dev->dev; __u8 *data; __u8 sp1; __u8 sp2; @@ -755,12 +756,10 @@ static void mos7720_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -777,7 +776,7 @@ static void mos7720_interrupt_callback(struct urb *urb) * oneukum 2007-03-14 */ if (unlikely(length != 4)) { - dbg("Wrong data !!!"); + dev_dbg(dev, "Wrong data !!!\n"); return; } @@ -786,31 +785,29 @@ static void mos7720_interrupt_callback(struct urb *urb) if ((sp1 | sp2) & 0x01) { /* No Interrupt Pending in both the ports */ - dbg("No Interrupt !!!"); + dev_dbg(dev, "No Interrupt !!!\n"); } else { switch (sp1 & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port 1: Receiver status error or address " - "bit detected in 9-bit mode\n"); + dev_dbg(dev, "Serial Port 1: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port 1: Receiver time out"); + dev_dbg(dev, "Serial Port 1: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port 1: Modem status change"); */ + /* dev_dbg(dev, "Serial Port 1: Modem status change\n"); */ break; } switch (sp2 & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port 2: Receiver status error or address " - "bit detected in 9-bit mode"); + dev_dbg(dev, "Serial Port 2: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port 2: Receiver time out"); + dev_dbg(dev, "Serial Port 2: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port 2: Modem status change"); */ + /* dev_dbg(dev, "Serial Port 2: Modem status change\n"); */ break; } } @@ -818,9 +815,7 @@ static void mos7720_interrupt_callback(struct urb *urb) exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, - "%s - Error %d submitting control urb\n", - __func__, result); + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* @@ -833,6 +828,7 @@ static void mos7715_interrupt_callback(struct urb *urb) int result; int length; int status = urb->status; + struct device *dev = &urb->dev->dev; __u8 *data; __u8 iir; @@ -845,12 +841,10 @@ static void mos7715_interrupt_callback(struct urb *urb) case -ESHUTDOWN: case -ENODEV: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -864,7 +858,7 @@ static void mos7715_interrupt_callback(struct urb *urb) * Byte 4: FIFO status for both */ if (unlikely(length != 4)) { - dbg("Wrong data !!!"); + dev_dbg(dev, "Wrong data !!!\n"); return; } @@ -872,14 +866,13 @@ static void mos7715_interrupt_callback(struct urb *urb) if (!(iir & 0x01)) { /* serial port interrupt pending */ switch (iir & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port: Receiver status error or address " - "bit detected in 9-bit mode\n"); + dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port: Receiver time out"); + dev_dbg(dev, "Serial Port: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port: Modem status change"); */ + /* dev_dbg(dev, "Serial Port: Modem status change\n"); */ break; } } @@ -897,9 +890,7 @@ static void mos7715_interrupt_callback(struct urb *urb) exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, - "%s - Error %d submitting control urb\n", - __func__, result); + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* @@ -916,13 +907,13 @@ static void mos7720_bulk_in_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero read bulk status received: %d", status); + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); return; } port = urb->context; - dbg("Entering...%s", __func__); + dev_dbg(&port->dev, "Entering...%s\n", __func__); data = urb->transfer_buffer; @@ -936,8 +927,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) if (port->read_urb->status != -EINPROGRESS) { retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) - dbg("usb_submit_urb(read bulk) failed, retval = %d", - retval); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); } } @@ -953,13 +943,13 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero write bulk status received:%d", status); + dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status); return; } mos7720_port = urb->context; if (!mos7720_port) { - dbg("NULL mos7720_port pointer"); + dev_dbg(&urb->dev->dev, "NULL mos7720_port pointer\n"); return ; } @@ -1061,9 +1051,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) port_number = port->number - port->serial->minor; read_mos_reg(serial, port_number, LSR, &data); - dbg("SS::%p LSR:%x", mos7720_port, data); - - dbg("Check:Sending Command .........."); + dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); write_mos_reg(serial, dummy, SP1_REG, 0x02); write_mos_reg(serial, dummy, SP2_REG, 0x02); @@ -1122,20 +1110,16 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) int chars = 0; struct moschip_port *mos7720_port; - dbg("%s:entering ...........", __func__); - mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __func__); + if (mos7720_port == NULL) return 0; - } for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1145,8 +1129,6 @@ static void mos7720_close(struct usb_serial_port *port) struct moschip_port *mos7720_port; int j; - dbg("mos7720_close:entering..."); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); @@ -1166,9 +1148,7 @@ static void mos7720_close(struct usb_serial_port *port) /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists, otherwise nop */ - dbg("Shutdown bulk write"); usb_kill_urb(port->write_urb); - dbg("Shutdown bulk read"); usb_kill_urb(port->read_urb); mutex_lock(&serial->disc_mutex); @@ -1182,8 +1162,6 @@ static void mos7720_close(struct usb_serial_port *port) } mutex_unlock(&serial->disc_mutex); mos7720_port->open = 0; - - dbg("Leaving %s", __func__); } static void mos7720_break(struct tty_struct *tty, int break_state) @@ -1193,8 +1171,6 @@ static void mos7720_break(struct tty_struct *tty, int break_state) struct usb_serial *serial; struct moschip_port *mos7720_port; - dbg("Entering %s", __func__); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); @@ -1225,13 +1201,9 @@ static int mos7720_write_room(struct tty_struct *tty) int room = 0; int i; - dbg("%s:entering ...........", __func__); - mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __func__); + if (mos7720_port == NULL) return -ENODEV; - } /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { @@ -1240,7 +1212,7 @@ static int mos7720_write_room(struct tty_struct *tty) room += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1257,15 +1229,11 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; const unsigned char *current_position = data; - dbg("%s:entering ...........", __func__); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("mos7720_port is NULL"); + if (mos7720_port == NULL) return -ENODEV; - } /* try to find a free urb in the list */ urb = NULL; @@ -1274,13 +1242,13 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; - dbg("URB:%d", i); + dev_dbg(&port->dev, "URB:%d\n", i); break; } } if (urb == NULL) { - dbg("%s - no more free urbs", __func__); + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); goto exit; } @@ -1296,7 +1264,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); - usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, + usb_serial_debug_data(&port->dev, __func__, transfer_size, urb->transfer_buffer); /* fill urb with data and submit */ @@ -1326,20 +1294,16 @@ static void mos7720_throttle(struct tty_struct *tty) struct moschip_port *mos7720_port; int status; - dbg("%s- port %d", __func__, port->number); - mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { - dbg("port not opened"); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); @@ -1349,7 +1313,7 @@ static void mos7720_throttle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; write_mos_reg(port->serial, port->number - port->serial->minor, MCR, mos7720_port->shadowMCR); @@ -1368,12 +1332,10 @@ static void mos7720_unthrottle(struct tty_struct *tty) return; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); @@ -1383,7 +1345,7 @@ static void mos7720_unthrottle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR |= UART_MCR_RTS; write_mos_reg(port->serial, port->number - port->serial->minor, MCR, mos7720_port->shadowMCR); @@ -1409,7 +1371,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port, /*********************************************** * Init Sequence for higher rates ***********************************************/ - dbg("Sending Setting Commands .........."); + dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); port_number = port->number - port->serial->minor; write_mos_reg(serial, port_number, IER, 0x00); @@ -1478,7 +1440,7 @@ static struct divisor_table_entry divisor_table[] = { * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor(int baudrate, int *divisor) +static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor) { int i; __u16 custom; @@ -1486,7 +1448,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) __u16 round; - dbg("%s - %d", __func__, baudrate); + dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].baudrate == baudrate) { @@ -1508,11 +1470,11 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) custom++; *divisor = custom; - dbg("Baud %d = %d", baudrate, custom); + dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom); return 0; } - dbg("Baud calculation Failed..."); + dev_dbg(&port->dev, "Baud calculation Failed...\n"); return -EINVAL; } @@ -1536,13 +1498,11 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, port = mos7720_port->port; serial = port->serial; - dbg("%s: Entering ..........", __func__); - number = port->number - port->serial->minor; - dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate); + dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); /* Calculate the Divisor */ - status = calc_baud_rate_divisor(baudrate, &divisor); + status = calc_baud_rate_divisor(port, baudrate, &divisor); if (status) { dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; @@ -1591,21 +1551,17 @@ static void change_port_settings(struct tty_struct *tty, serial = port->serial; port_number = port->number - port->serial->minor; - dbg("%s - port %d", __func__, port->number); - if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - lData = UART_LCR_WLEN8; lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* Change the number of bits */ switch (cflag & CSIZE) { @@ -1633,14 +1589,14 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) { lParity = UART_LCR_PARITY; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); } else { lParity = (UART_LCR_EPAR | UART_LCR_PARITY); - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "%s - parity = none\n", __func__); } if (cflag & CMSPAR) @@ -1649,10 +1605,10 @@ static void change_port_settings(struct tty_struct *tty, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = UART_LCR_STOP; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); } else { lStop = 0x00; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); } #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ @@ -1698,7 +1654,7 @@ static void change_port_settings(struct tty_struct *tty, baud = tty_get_baud_rate(tty); if (!baud) { /* pick a default, any default... */ - dbg("Picked default baud..."); + dev_dbg(&port->dev, "Picked default baud...\n"); baud = 9600; } @@ -1709,7 +1665,7 @@ static void change_port_settings(struct tty_struct *tty, return; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); /* FIXME: needs to write actual resulting baud back not just blindly do so */ @@ -1721,8 +1677,7 @@ static void change_port_settings(struct tty_struct *tty, if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", - status); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } @@ -1747,23 +1702,19 @@ static void mos7720_set_termios(struct tty_struct *tty, return; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s\n", "setting termios - ASPIRE"); + dev_dbg(&port->dev, "setting termios - ASPIRE\n"); - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; - dbg("%s - cflag %08x iflag %08x", __func__, - tty->termios->c_cflag, - RELEVANT_IFLAG(tty->termios->c_iflag)); + dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - dbg("%s - old cflag %08x old iflag %08x", __func__, - old_termios->c_cflag, - RELEVANT_IFLAG(old_termios->c_iflag)); - - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); @@ -1771,8 +1722,7 @@ static void mos7720_set_termios(struct tty_struct *tty, if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", - status); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } @@ -1800,7 +1750,7 @@ static int get_lsr_info(struct tty_struct *tty, read_mos_reg(port->serial, port_number, LSR, &data); if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) == (UART_LSR_TEMT | UART_LSR_THRE)) { - dbg("%s -- Empty", __func__); + dev_dbg(&port->dev, "%s -- Empty\n", __func__); result = TIOCSER_TEMT; } } @@ -1817,8 +1767,6 @@ static int mos7720_tiocmget(struct tty_struct *tty) unsigned int mcr ; unsigned int msr ; - dbg("%s - port %d", __func__, port->number); - mcr = mos7720_port->shadowMCR; msr = mos7720_port->shadowMSR; @@ -1829,8 +1777,6 @@ static int mos7720_tiocmget(struct tty_struct *tty) | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - dbg("%s -- %x", __func__, result); - return result; } @@ -1840,8 +1786,6 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int mcr ; - dbg("%s - port %d", __func__, port->number); - dbg("he was at tiocmset"); mcr = mos7720_port->shadowMCR; @@ -1888,8 +1832,8 @@ static int mos7720_get_icount(struct tty_struct *tty, icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, + icount->rx, icount->tx); return 0; } @@ -1975,29 +1919,28 @@ static int mos7720_ioctl(struct tty_struct *tty, if (mos7720_port == NULL) return -ENODEV; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x", __func__, cmd); switch (cmd) { case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg); /* FIXME: These should be using the mode methods */ case TIOCMBIS: case TIOCMBIC: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", - __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMSET/TIOCMBIC/TIOCMSET\n", __func__); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); cprev = mos7720_port->icount; while (1) { if (signal_pending(current)) @@ -2030,13 +1973,6 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; - dbg("%s: Entering ..........", __func__); - - if (!serial) { - dbg("Invalid Handler"); - return -ENODEV; - } - product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -2081,8 +2017,8 @@ static int mos7720_startup(struct usb_serial *serial) mos7720_port->port = serial->port[i]; usb_set_serial_port_data(serial->port[i], mos7720_port); - dbg("port number is %d", serial->port[i]->number); - dbg("serial number is %d", serial->minor); + dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number); + dev_dbg(&dev->dev, "serial number is %d\n", serial->minor); } @@ -2106,7 +2042,7 @@ static int mos7720_startup(struct usb_serial *serial) #endif /* LSR For Port 1 */ read_mos_reg(serial, 0, LSR, &data); - dbg("LSR:%x", data); + dev_dbg(&dev->dev, "LSR:%x\n", data); return 0; } @@ -2195,6 +2131,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 57eca2448424..d6d4eeca8c68 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -82,8 +82,7 @@ * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ -#define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ +#define MOS_WDR_TIMEOUT 5000 /* default urb timeout */ #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 @@ -253,8 +252,6 @@ struct moschip_port { struct timer_list led_timer2; /* Timer for LED off */ }; -static bool debug; - /* * mos7840_set_reg_sync * To set the Control register by calling usb_fill_control_urb function @@ -266,7 +263,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, { struct usb_device *dev = port->serial->dev; val = val & 0x00ff; - dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val); + dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val); return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, val, reg, NULL, 0, @@ -294,7 +291,7 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); *val = buf[0]; - dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val); + dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val); kfree(buf); return ret; @@ -317,21 +314,16 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, if (port->serial->num_ports == 4) { val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_set_uart_reg application number is %x", val); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_set_uart_reg application number is %x", - val); } else { - val |= - (((__u16) port->number - + val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 2) << 8; - dbg("mos7840_set_uart_reg application number is %x", - val); } } + dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, val, reg, NULL, 0, MOS_WDR_TIMEOUT); @@ -355,27 +347,21 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, if (!buf) return -ENOMEM; - /* dbg("application number is %4x", - (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ /* Wval is same as application number */ if (port->serial->num_ports == 4) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_get_uart_reg application number is %x", Wval); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; - dbg("mos7840_get_uart_reg application number is %x", - Wval); } else { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 2) << 8; - dbg("mos7840_get_uart_reg application number is %x", - Wval); } } + dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); @@ -385,14 +371,13 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, return ret; } -static void mos7840_dump_serial_port(struct moschip_port *mos7840_port) +static void mos7840_dump_serial_port(struct usb_serial_port *port, + struct moschip_port *mos7840_port) { - dbg("***************************************"); - dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset); - dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset); - dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset); - dbg("***************************************"); + dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset); + dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset); + dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset); } @@ -451,8 +436,6 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) { struct async_icount *icount; - dbg("%s - %02x", __func__, new_lsr); - if (new_lsr & SERIAL_LSR_BI) { /* * Parity and Framing errors only count if they @@ -493,6 +476,7 @@ static void mos7840_control_callback(struct urb *urb) { unsigned char *data; struct moschip_port *mos7840_port; + struct device *dev = &urb->dev->dev; __u8 regval = 0x0; int result = 0; int status = urb->status; @@ -507,21 +491,19 @@ static void mos7840_control_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } - dbg("%s urb buffer size is %d", __func__, urb->actual_length); - dbg("%s mos7840_port->MsrLsr is %d port %d", __func__, - mos7840_port->MsrLsr, mos7840_port->port_num); + dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); + dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, + mos7840_port->MsrLsr, mos7840_port->port_num); data = urb->transfer_buffer; regval = (__u8) data[0]; - dbg("%s data is %x", __func__, regval); + dev_dbg(dev, "%s data is %x\n", __func__, regval); if (mos7840_port->MsrLsr == 0) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) @@ -533,8 +515,7 @@ exit: result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); spin_unlock(&mos7840_port->pool_lock); if (result) { - dev_err(&urb->dev->dev, - "%s - Error %d submitting interrupt urb\n", + dev_err(dev, "%s - Error %d submitting interrupt urb\n", __func__, result); } } @@ -571,12 +552,12 @@ static void mos7840_set_led_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d", + __func__, urb->status); break; default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d", + __func__, urb->status); } } @@ -651,12 +632,12 @@ static void mos7840_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } @@ -673,7 +654,7 @@ static void mos7840_interrupt_callback(struct urb *urb) * Byte 5 FIFO status for both */ if (length && length > 5) { - dbg("%s", "Wrong data !!!"); + dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n"); return; } @@ -690,17 +671,17 @@ static void mos7840_interrupt_callback(struct urb *urb) (__u16) (serial->minor)) + 1) << 8; if (mos7840_port->open) { if (sp[i] & 0x01) { - dbg("SP%d No Interrupt !!!", i); + dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i); } else { switch (sp[i] & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port %d: Receiver status error or ", i); - dbg("address bit detected in 9-bit mode"); + dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i); + dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n"); mos7840_port->MsrLsr = 1; wreg = LINE_STATUS_REGISTER; break; case SERIAL_IIR_MS: - dbg("Serial Port %d: Modem status change", i); + dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i); mos7840_port->MsrLsr = 0; wreg = MODEM_STATUS_REGISTER; break; @@ -732,11 +713,11 @@ static int mos7840_port_paranoia_check(struct usb_serial_port *port, const char *function) { if (!port) { - dbg("%s - port == NULL", function); + pr_debug("%s - port == NULL\n", function); return -1; } if (!port->serial) { - dbg("%s - port->serial == NULL", function); + pr_debug("%s - port->serial == NULL\n", function); return -1; } @@ -748,11 +729,11 @@ static int mos7840_serial_paranoia_check(struct usb_serial *serial, const char *function) { if (!serial) { - dbg("%s - serial == NULL", function); + pr_debug("%s - serial == NULL\n", function); return -1; } if (!serial->type) { - dbg("%s - serial->type == NULL!", function); + pr_debug("%s - serial->type == NULL!\n", function); return -1; } @@ -791,49 +772,44 @@ static void mos7840_bulk_in_callback(struct urb *urb) int status = urb->status; mos7840_port = urb->context; - if (!mos7840_port) { - dbg("%s", "NULL mos7840_port pointer"); + if (!mos7840_port) return; - } if (status) { - dbg("nonzero read bulk status received: %d", status); + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); mos7840_port->read_urb_busy = false; return; } - port = (struct usb_serial_port *)mos7840_port->port; + port = mos7840_port->port; if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); mos7840_port->read_urb_busy = false; return; } serial = mos7840_get_usb_serial(port, __func__); if (!serial) { - dbg("%s", "Bad serial pointer"); mos7840_port->read_urb_busy = false; return; } data = urb->transfer_buffer; + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length) { tty = tty_port_tty_get(&mos7840_port->port->port); if (tty) { tty_insert_flip_string(tty, data, urb->actual_length); - dbg(" %s ", data); tty_flip_buffer_push(tty); tty_kref_put(tty); } mos7840_port->icount.rx += urb->actual_length; smp_wmb(); - dbg("mos7840_port->icount.rx is %d:", - mos7840_port->icount.rx); + dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx); } if (!mos7840_port->read_urb) { - dbg("%s", "URB KILLED !!!"); + dev_dbg(&port->dev, "%s", "URB KILLED !!!\n"); mos7840_port->read_urb_busy = false; return; } @@ -851,7 +827,7 @@ static void mos7840_bulk_in_callback(struct urb *urb) retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); if (retval) { - dbg("usb_submit_urb(read bulk) failed, retval = %d", retval); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); mos7840_port->read_urb_busy = false; } } @@ -865,11 +841,13 @@ static void mos7840_bulk_in_callback(struct urb *urb) static void mos7840_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7840_port; + struct usb_serial_port *port; struct tty_struct *tty; int status = urb->status; int i; mos7840_port = urb->context; + port = mos7840_port->port; spin_lock(&mos7840_port->pool_lock); for (i = 0; i < NUM_URBS; i++) { if (urb == mos7840_port->write_urb_pool[i]) { @@ -880,16 +858,14 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) spin_unlock(&mos7840_port->pool_lock); if (status) { - dbg("nonzero write bulk status received:%d", status); + dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status); return; } - if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } - tty = tty_port_tty_get(&mos7840_port->port->port); + tty = tty_port_tty_get(&port->port); if (tty && mos7840_port->open) tty_wakeup(tty); tty_kref_put(tty); @@ -930,17 +906,13 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) struct moschip_port *mos7840_port; struct moschip_port *port0; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return -ENODEV; - } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __func__)) { - dbg("%s", "Serial Paranoia failed"); + if (mos7840_serial_paranoia_check(serial, __func__)) return -ENODEV; - } mos7840_port = mos7840_get_port_private(port); port0 = mos7840_get_port_private(serial->port[0]); @@ -991,20 +963,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) Data = 0x0; status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { - dbg("Reading Spreg failed"); + dev_dbg(&port->dev, "Reading Spreg failed\n"); return -1; } Data |= 0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { - dbg("writing Spreg failed"); + dev_dbg(&port->dev, "writing Spreg failed\n"); return -1; } Data &= ~0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { - dbg("writing Spreg failed"); + dev_dbg(&port->dev, "writing Spreg failed\n"); return -1; } /* End of block to be checked */ @@ -1013,7 +985,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); if (status < 0) { - dbg("Reading Controlreg failed"); + dev_dbg(&port->dev, "Reading Controlreg failed\n"); return -1; } Data |= 0x08; /* Driver done bit */ @@ -1021,7 +993,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); if (status < 0) { - dbg("writing Controlreg failed"); + dev_dbg(&port->dev, "writing Controlreg failed\n"); return -1; } /* do register settings here */ @@ -1032,21 +1004,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) Data = 0x00; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { - dbg("disabling interrupts failed"); + dev_dbg(&port->dev, "disabling interrupts failed\n"); return -1; } /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); + dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); return -1; } Data = 0xcf; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); + dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); return -1; } @@ -1143,12 +1115,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) * (can't set it up in mos7840_startup as the * * structures were not set up at that time.) */ - dbg("port number is %d", port->number); - dbg("serial number is %d", port->serial->minor); - dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress); - dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress); - dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress); - dbg("port's number in the device is %d", mos7840_port->port_num); + dev_dbg(&port->dev, "port number is %d\n", port->number); + dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); + dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); + dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); + dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num); mos7840_port->read_urb = port->read_urb; /* set up our bulk in urb */ @@ -1172,8 +1144,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_bulk_in_callback, mos7840_port); } - dbg("mos7840_open: bulkin endpoint is %d", - port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress); mos7840_port->read_urb_busy = true; response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); if (response) { @@ -1198,9 +1169,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_port->icount.tx = 0; mos7840_port->icount.rx = 0; - dbg("usb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p", - serial, mos7840_port, port); - return 0; } @@ -1222,21 +1190,22 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) unsigned long flags; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return 0; - } mos7840_port = mos7840_get_port_private(port); if (mos7840_port == NULL) return 0; spin_lock_irqsave(&mos7840_port->pool_lock, flags); - for (i = 0; i < NUM_URBS; ++i) - if (mos7840_port->busy[i]) - chars += URB_TRANSFER_BUFFER_SIZE; + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->busy[i]) { + struct urb *urb = mos7840_port->write_urb_pool[i]; + chars += urb->transfer_buffer_length; + } + } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1254,16 +1223,12 @@ static void mos7840_close(struct usb_serial_port *port) int j; __u16 Data; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } serial = mos7840_get_usb_serial(port, __func__); - if (!serial) { - dbg("%s", "Serial Paranoia failed"); + if (!serial) return; - } mos7840_port = mos7840_get_port_private(port); port0 = mos7840_get_port_private(serial->port[0]); @@ -1289,27 +1254,26 @@ static void mos7840_close(struct usb_serial_port *port) * and interrupt read if they exists */ if (serial->dev) { if (mos7840_port->write_urb) { - dbg("%s", "Shutdown bulk write"); + dev_dbg(&port->dev, "%s", "Shutdown bulk write\n"); usb_kill_urb(mos7840_port->write_urb); } if (mos7840_port->read_urb) { - dbg("%s", "Shutdown bulk read"); + dev_dbg(&port->dev, "%s", "Shutdown bulk read\n"); usb_kill_urb(mos7840_port->read_urb); mos7840_port->read_urb_busy = false; } if ((&mos7840_port->control_urb)) { - dbg("%s", "Shutdown control read"); + dev_dbg(&port->dev, "%s", "Shutdown control read\n"); /*/ usb_kill_urb (mos7840_port->control_urb); */ } } /* if(mos7840_port->ctrl_buf != NULL) */ /* kfree(mos7840_port->ctrl_buf); */ port0->open_ports--; - dbg("mos7840_num_open_ports in close%d:in port%d", - port0->open_ports, port->number); + dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); if (port0->open_ports == 0) { if (serial->port[0]->interrupt_in_urb) { - dbg("%s", "Shutdown interrupt_in_urb"); + dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); usb_kill_urb(serial->port[0]->interrupt_in_urb); } } @@ -1344,7 +1308,7 @@ static void mos7840_close(struct usb_serial_port *port) static void mos7840_block_until_chase_response(struct tty_struct *tty, struct moschip_port *mos7840_port) { - int timeout = 1 * HZ; + int timeout = msecs_to_jiffies(1000); int wait = 10; int count; @@ -1361,7 +1325,7 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty, /* No activity.. count down section */ wait--; if (wait == 0) { - dbg("%s - TIMEOUT", __func__); + dev_dbg(&mos7840_port->port->dev, "%s - TIMEOUT\n", __func__); return; } else { /* Reset timeout value back to seconds */ @@ -1382,16 +1346,12 @@ static void mos7840_break(struct tty_struct *tty, int break_state) struct usb_serial *serial; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } serial = mos7840_get_usb_serial(port, __func__); - if (!serial) { - dbg("%s", "Serial Paranoia failed"); + if (!serial) return; - } mos7840_port = mos7840_get_port_private(port); @@ -1409,8 +1369,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state) /* FIXME: no locking on shadowLCR anywhere in driver */ mos7840_port->shadowLCR = data; - dbg("mcs7840_break mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, mos7840_port->shadowLCR); } @@ -1431,17 +1390,12 @@ static int mos7840_write_room(struct tty_struct *tty) unsigned long flags; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); - dbg("%s", " mos7840_write_room:leaving ..........."); + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { - dbg("%s", "mos7840_break:leaving ..........."); + if (mos7840_port == NULL) return -1; - } spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { @@ -1451,7 +1405,7 @@ static int mos7840_write_room(struct tty_struct *tty) spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; - dbg("%s - returns %d", __func__, room); + dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1484,9 +1438,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, Data = 0x00; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; - dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data); - dbg("mos7840_write: mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data); + dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); /* Data = 0x03; */ /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */ @@ -1499,34 +1452,27 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */ Data = 0x00; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); - dbg("mos7840_write:DLL value is %x", Data); + dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data); Data = 0x0; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); - dbg("mos7840_write:DLM value is %x", Data); + dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data); Data = Data & ~SERIAL_LCR_DLAB; - dbg("mos7840_write: mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); #endif - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Port Paranoia failed"); + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __func__)) { - dbg("%s", "Serial Paranoia failed"); + if (mos7840_serial_paranoia_check(serial, __func__)) return -1; - } mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { - dbg("%s", "mos7840_port is NULL"); + if (mos7840_port == NULL) return -1; - } /* try to find a free urb in the list */ urb = NULL; @@ -1536,14 +1482,14 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, if (!mos7840_port->busy[i]) { mos7840_port->busy[i] = 1; urb = mos7840_port->write_urb_pool[i]; - dbg("URB:%d", i); + dev_dbg(&port->dev, "URB:%d\n", i); break; } } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); if (urb == NULL) { - dbg("%s - no more free urbs", __func__); + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); goto exit; } @@ -1583,7 +1529,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, } data1 = urb->transfer_buffer; - dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress); + dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); /* Turn on LED */ if (mos7840_port->has_led && !mos7840_port->led_flag) { @@ -1606,7 +1552,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, bytes_sent = transfer_size; mos7840_port->icount.tx += transfer_size; smp_wmb(); - dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx); + dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); exit: return bytes_sent; @@ -1624,12 +1570,8 @@ static void mos7840_throttle(struct tty_struct *tty) struct moschip_port *mos7840_port; int status; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } - - dbg("- port %d", port->number); mos7840_port = mos7840_get_port_private(port); @@ -1637,7 +1579,7 @@ static void mos7840_throttle(struct tty_struct *tty) return; if (!mos7840_port->open) { - dbg("%s", "port not opened"); + dev_dbg(&port->dev, "%s", "port not opened\n"); return; } @@ -1649,7 +1591,7 @@ static void mos7840_throttle(struct tty_struct *tty) return; } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7840_port->shadowMCR &= ~MCR_RTS; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); @@ -1670,16 +1612,14 @@ static void mos7840_unthrottle(struct tty_struct *tty) int status; struct moschip_port *mos7840_port = mos7840_get_port_private(port); - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } if (mos7840_port == NULL) return; if (!mos7840_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1692,7 +1632,7 @@ static void mos7840_unthrottle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7840_port->shadowMCR |= MCR_RTS; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); @@ -1724,7 +1664,7 @@ static int mos7840_tiocmget(struct tty_struct *tty) | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); - dbg("%s - 0x%04X", __func__, result); + dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); return result; } @@ -1762,7 +1702,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); + dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n"); return status; } @@ -1774,10 +1714,11 @@ static int mos7840_tiocmset(struct tty_struct *tty, * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, +static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port, + int baudRate, int *divisor, __u16 *clk_sel_val) { - dbg("%s - %d", __func__, baudRate); + dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate); if (baudRate <= 115200) { *divisor = 115200 / baudRate; @@ -1830,11 +1771,11 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, custom++; *divisor = custom; - dbg(" Baud %d = %d", baudrate, custom); + dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom); return 0; } - dbg("%s", " Baud calculation Failed..."); + dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n"); return -1; #endif } @@ -1858,21 +1799,17 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (mos7840_port == NULL) return -1; - port = (struct usb_serial_port *)mos7840_port->port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + port = mos7840_port->port; + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } - if (mos7840_serial_paranoia_check(port->serial, __func__)) { - dbg("%s", "Invalid Serial"); + if (mos7840_serial_paranoia_check(port->serial, __func__)) return -1; - } number = mos7840_port->port->number - mos7840_port->port->serial->minor; - dbg("%s - port = %d, baud = %d", __func__, - mos7840_port->port->number, baudRate); + dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__, + mos7840_port->port->number, baudRate); /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { #ifdef HW_flow_control @@ -1883,7 +1820,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); return -1; } #endif @@ -1896,7 +1833,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); return -1; } #endif @@ -1906,19 +1843,19 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (1) { /* baudRate <= 115200) */ clk_sel_val = 0x0; Data = 0x0; - status = mos7840_calc_baud_rate_divisor(baudRate, &divisor, + status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor, &clk_sel_val); status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { - dbg("reading spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n"); return -1; } Data = (Data & 0x8f) | clk_sel_val; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); return -1; } /* Calculate the Divisor */ @@ -1934,11 +1871,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, /* Write the divisor */ Data = (unsigned char)(divisor & 0xff); - dbg("set_serial_baud Value to write DLL is %x", Data); + dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data); mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); Data = (unsigned char)((divisor & 0xff00) >> 8); - dbg("set_serial_baud Value to write DLM is %x", Data); + dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data); mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); /* Disable access to divisor latch */ @@ -1973,24 +1910,18 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (mos7840_port == NULL) return; - port = (struct usb_serial_port *)mos7840_port->port; + port = mos7840_port->port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } - if (mos7840_serial_paranoia_check(port->serial, __func__)) { - dbg("%s", "Invalid Serial"); + if (mos7840_serial_paranoia_check(port->serial, __func__)) return; - } serial = port->serial; - dbg("%s - port %d", __func__, mos7840_port->port->number); - if (!mos7840_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } @@ -1998,8 +1929,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty, lStop = LCR_STOP_1; lParity = LCR_PAR_NONE; - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* Change the number of bits */ if (cflag & CSIZE) { @@ -2025,14 +1956,14 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) { lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); } else { lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "%s - parity = none\n", __func__); } if (cflag & CMSPAR) @@ -2041,10 +1972,10 @@ static void mos7840_change_port_settings(struct tty_struct *tty, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); } else { lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); } /* Update the LCR with the correct value */ @@ -2052,8 +1983,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty, ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); mos7840_port->shadowLCR |= (lData | lParity | lStop); - dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__, + mos7840_port->shadowLCR); /* Disable Interrupts */ Data = 0x00; mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); @@ -2094,11 +2025,11 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (!baud) { /* pick a default, any default... */ - dbg("%s", "Picked default baud..."); + dev_dbg(&port->dev, "%s", "Picked default baud...\n"); baud = 9600; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); /* Enable Interrupts */ @@ -2109,15 +2040,15 @@ static void mos7840_change_port_settings(struct tty_struct *tty, mos7840_port->read_urb_busy = true; status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); if (status) { - dbg("usb_submit_urb(read bulk) failed, status = %d", + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); mos7840_port->read_urb_busy = false; } } wake_up(&mos7840_port->delta_msr_wait); mos7840_port->delta_msr_cond = 1; - dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x", - mos7840_port->shadowLCR); + dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__, + mos7840_port->shadowLCR); } /***************************************************************************** @@ -2135,17 +2066,13 @@ static void mos7840_set_termios(struct tty_struct *tty, struct usb_serial *serial; struct moschip_port *mos7840_port; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return; - } serial = port->serial; - if (mos7840_serial_paranoia_check(serial, __func__)) { - dbg("%s", "Invalid Serial"); + if (mos7840_serial_paranoia_check(serial, __func__)) return; - } mos7840_port = mos7840_get_port_private(port); @@ -2153,26 +2080,26 @@ static void mos7840_set_termios(struct tty_struct *tty, return; if (!mos7840_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s", "setting termios - "); + dev_dbg(&port->dev, "%s", "setting termios - \n"); - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); /* change the port settings to the new ones specified */ mos7840_change_port_settings(tty, mos7840_port, old_termios); if (!mos7840_port->read_urb) { - dbg("%s", "URB KILLED !!!!!"); + dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n"); return; } @@ -2180,7 +2107,7 @@ static void mos7840_set_termios(struct tty_struct *tty, mos7840_port->read_urb_busy = true; status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); if (status) { - dbg("usb_submit_urb(read bulk) failed, status = %d", + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); mos7840_port->read_urb_busy = false; } @@ -2205,10 +2132,8 @@ static int mos7840_get_lsr_info(struct tty_struct *tty, unsigned int result = 0; count = mos7840_chars_in_buffer(tty); - if (count == 0) { - dbg("%s -- Empty", __func__); + if (count == 0) result = TIOCSER_TEMT; - } if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; @@ -2271,8 +2196,8 @@ static int mos7840_get_icount(struct tty_struct *tty, icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount->rx, icount->tx); + dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, + icount->rx, icount->tx); return 0; } @@ -2291,35 +2216,33 @@ static int mos7840_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - if (mos7840_port_paranoia_check(port, __func__)) { - dbg("%s", "Invalid port"); + if (mos7840_port_paranoia_check(port, __func__)) return -1; - } mos7840_port = mos7840_get_port_private(port); if (mos7840_port == NULL) return -1; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); switch (cmd) { /* return number of bytes available */ case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return mos7840_get_lsr_info(tty, argp); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return mos7840_get_serial_info(mos7840_port, argp); case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__); break; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); cprev = mos7840_port->icount; while (1) { /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ @@ -2435,11 +2358,6 @@ static int mos7840_startup(struct usb_serial *serial) int i, status; __u16 Data; - if (!serial) { - dbg("%s", "Invalid Handler"); - return -1; - } - dev = serial->dev; /* we set up the pointers to the endpoints in the mos7840_open * @@ -2447,7 +2365,7 @@ static int mos7840_startup(struct usb_serial *serial) /* set up port private structures */ for (i = 0; i < serial->num_ports; ++i) { - dbg ("mos7840_startup: configuring port %d............", i); + dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i); mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { dev_err(&dev->dev, "%s - Out of memory\n", __func__); @@ -2468,10 +2386,10 @@ static int mos7840_startup(struct usb_serial *serial) * usb-serial.c:get_free_serial() and cannot therefore be used * to index device instances */ mos7840_port->port_num = i + 1; - dbg ("serial->port[i]->number = %d", serial->port[i]->number); - dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor); - dbg ("mos7840_port->port_num = %d", mos7840_port->port_num); - dbg ("serial->minor = %d", serial->minor); + dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number); + dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor); + dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); + dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; @@ -2498,18 +2416,17 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->ControlRegOffset = 0xd; mos7840_port->DcrRegOffset = 0x1c; } - mos7840_dump_serial_port(mos7840_port); + mos7840_dump_serial_port(serial->port[i], mos7840_port); mos7840_set_port_private(serial->port[i], mos7840_port); /* enable rx_disable bit in control register */ status = mos7840_get_reg_sync(serial->port[i], mos7840_port->ControlRegOffset, &Data); if (status < 0) { - dbg("Reading ControlReg failed status-0x%x", status); + dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status); break; } else - dbg("ControlReg Reading success val is %x, status%d", - Data, status); + dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); Data |= 0x08; /* setting driver done bit */ Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */ @@ -2518,11 +2435,10 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[i], mos7840_port->ControlRegOffset, Data); if (status < 0) { - dbg("Writing ControlReg failed(rx_disable) status-0x%x", status); + dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); break; } else - dbg("ControlReg Writing success(rx_disable) status%d", - status); + dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status); /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 */ @@ -2530,61 +2446,57 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[i], (__u16) (mos7840_port->DcrRegOffset + 0), Data); if (status < 0) { - dbg("Writing DCR0 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status); break; } else - dbg("DCR0 Writing success status%d", status); + dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status); Data = 0x05; status = mos7840_set_reg_sync(serial->port[i], (__u16) (mos7840_port->DcrRegOffset + 1), Data); if (status < 0) { - dbg("Writing DCR1 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status); break; } else - dbg("DCR1 Writing success status%d", status); + dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status); Data = 0x24; status = mos7840_set_reg_sync(serial->port[i], (__u16) (mos7840_port->DcrRegOffset + 2), Data); if (status < 0) { - dbg("Writing DCR2 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status); break; } else - dbg("DCR2 Writing success status%d", status); + dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status); /* write values in clkstart0x0 and clkmulti 0x20 */ Data = 0x0; status = mos7840_set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER, Data); if (status < 0) { - dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); break; } else - dbg("CLK_START_VALUE_REGISTER Writing success status%d", status); + dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); Data = 0x20; status = mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, Data); if (status < 0) { - dbg("Writing CLK_MULTI_REGISTER failed status-0x%x", - status); + dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); goto error; } else - dbg("CLK_MULTI_REGISTER Writing success status%d", - status); + dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); /* write value 0x0 to scratchpad register */ Data = 0x00; status = mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, Data); if (status < 0) { - dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", - status); + dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); break; } else - dbg("SCRATCH_PAD_REGISTER Writing success status%d", - status); + dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); /* Zero Length flag register */ if ((mos7840_port->port_num != 1) @@ -2594,31 +2506,25 @@ static int mos7840_startup(struct usb_serial *serial) status = mos7840_set_reg_sync(serial->port[i], (__u16) (ZLP_REG1 + ((__u16)mos7840_port->port_num)), Data); - dbg("ZLIP offset %x", - (__u16) (ZLP_REG1 + - ((__u16) mos7840_port->port_num))); + dev_dbg(&dev->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); if (status < 0) { - dbg("Writing ZLP_REG%d failed status-0x%x", - i + 2, status); + dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status); break; } else - dbg("ZLP_REG%d Writing success status%d", - i + 2, status); + dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status); } else { Data = 0xff; status = mos7840_set_reg_sync(serial->port[i], (__u16) (ZLP_REG1 + ((__u16)mos7840_port->port_num) - 0x1), Data); - dbg("ZLIP offset %x", - (__u16) (ZLP_REG1 + - ((__u16) mos7840_port->port_num) - 0x1)); + dev_dbg(&dev->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); if (status < 0) { - dbg("Writing ZLP_REG%d failed status-0x%x", - i + 1, status); + dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status); break; } else - dbg("ZLP_REG%d Writing success status%d", - i + 1, status); + dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status); } mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -2659,20 +2565,19 @@ static int mos7840_startup(struct usb_serial *serial) MODEM_CONTROL_REGISTER, 0x0300); } } - dbg ("mos7840_startup: all ports configured..........."); /* Zero Length flag enable */ Data = 0x0f; status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); if (status < 0) { - dbg("Writing ZLP_REG5 failed status-0x%x", status); + dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); goto error; } else - dbg("ZLP_REG5 Writing success status%d", status); + dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status); /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); + (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT); return 0; error: for (/* nothing */; i >= 0; i--) { @@ -2698,11 +2603,6 @@ static void mos7840_disconnect(struct usb_serial *serial) unsigned long flags; struct moschip_port *mos7840_port; - if (!serial) { - dbg("%s", "Invalid Handler"); - return; - } - /* check for the ports to be closed,close the ports and disconnect */ /* free private structure allocated for serial port * @@ -2710,7 +2610,6 @@ static void mos7840_disconnect(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - dbg ("mos7840_port %d = %p", i, mos7840_port); if (mos7840_port) { spin_lock_irqsave(&mos7840_port->pool_lock, flags); mos7840_port->zombie = 1; @@ -2730,11 +2629,6 @@ static void mos7840_release(struct usb_serial *serial) int i; struct moschip_port *mos7840_port; - if (!serial) { - dbg("%s", "Invalid Handler"); - return; - } - /* check for the ports to be closed,close the ports and disconnect */ /* free private structure allocated for serial port * @@ -2742,7 +2636,6 @@ static void mos7840_release(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - dbg("mos7840_port %d = %p", i, mos7840_port); if (mos7840_port) { if (mos7840_port->has_led) { /* Turn off LED */ @@ -2799,6 +2692,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index d95452cc076d..1566f8f500ae 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -21,8 +21,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ { USB_DEVICE(0x0df7, 0x0900) }, /* Mobile Action i-gotU */ @@ -55,8 +53,7 @@ static void navman_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { @@ -123,6 +120,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6f3d7051c7f4..6def58b79382 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -23,8 +23,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static bool debug; - /* * Version Information */ @@ -164,31 +162,21 @@ static void omninet_read_bulk_callback(struct urb *urb) struct omninet_header *header = (struct omninet_header *) &data[0]; int status = urb->status; int result; - int i; if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); return; } - if (debug && header->oh_xxx != 0x30) { - if (urb->actual_length) { - printk(KERN_DEBUG "%s: omninet_read %d: ", - __FILE__, header->oh_len); - for (i = 0; i < (header->oh_len + - OMNINET_HEADERLEN); i++) - printk("%.2x ", data[i]); - printk("\n"); - } - } - if (urb->actual_length && header->oh_len) { struct tty_struct *tty = tty_port_tty_get(&port->port); - tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET, + if (tty) { + tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET, header->oh_len); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } } /* Continue trying to always read */ @@ -212,12 +200,12 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, int result; if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } if (!test_and_clear_bit(0, &port->write_urbs_free)) { - dbg("%s - already writing", __func__); + dev_dbg(&port->dev, "%s - already writing\n", __func__); return 0; } @@ -226,8 +214,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, - wport->write_urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, + wport->write_urb->transfer_buffer); header->oh_seq = od->od_outseq++; header->oh_len = count; @@ -261,7 +249,7 @@ static int omninet_write_room(struct tty_struct *tty) if (test_bit(0, &wport->write_urbs_free)) room = wport->bulk_out_size - OMNINET_HEADERLEN; - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -275,8 +263,8 @@ static void omninet_write_bulk_callback(struct urb *urb) set_bit(0, &port->write_urbs_free); if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); return; } @@ -304,6 +292,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 02cb1b7f6559..41b1647306eb 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -32,8 +32,6 @@ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ #define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, { }, @@ -78,17 +76,16 @@ static void opticon_read_bulk_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&priv->udev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&priv->udev->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, - data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length > 2) { data_length = urb->actual_length - 2; @@ -229,8 +226,8 @@ static void opticon_write_control_callback(struct urb *urb) kfree(urb->setup_packet); if (status) - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&priv->udev->dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; @@ -253,7 +250,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit", __func__); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); return 0; } priv->outstanding_urbs++; @@ -276,7 +273,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(buffer, buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); + usb_serial_debug_data(&port->dev, __func__, count, buffer); /* The conncected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ @@ -338,7 +335,7 @@ static int opticon_write_room(struct tty_struct *tty) spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - write limit hit", __func__); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); return 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -394,7 +391,7 @@ static int opticon_tiocmget(struct tty_struct *tty) result |= TIOCM_CTS; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s - %x", __func__, result); + dev_dbg(&port->dev, "%s - %x\n", __func__, result); return result; } @@ -466,7 +463,7 @@ static int opticon_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct opticon_private *priv = usb_get_serial_data(port->serial); - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: @@ -612,6 +609,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 08ff9b862049..30cff03e9f01 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -80,85 +80,9 @@ static void option_instat_callback(struct urb *urb); #define OPTION_PRODUCT_GTM380_MODEM 0x7201 #define HUAWEI_VENDOR_ID 0x12D1 -#define HUAWEI_PRODUCT_E600 0x1001 -#define HUAWEI_PRODUCT_E220 0x1003 -#define HUAWEI_PRODUCT_E220BIS 0x1004 -#define HUAWEI_PRODUCT_E1401 0x1401 -#define HUAWEI_PRODUCT_E1402 0x1402 -#define HUAWEI_PRODUCT_E1403 0x1403 -#define HUAWEI_PRODUCT_E1404 0x1404 -#define HUAWEI_PRODUCT_E1405 0x1405 -#define HUAWEI_PRODUCT_E1406 0x1406 -#define HUAWEI_PRODUCT_E1407 0x1407 -#define HUAWEI_PRODUCT_E1408 0x1408 -#define HUAWEI_PRODUCT_E1409 0x1409 -#define HUAWEI_PRODUCT_E140A 0x140A -#define HUAWEI_PRODUCT_E140B 0x140B -#define HUAWEI_PRODUCT_E140C 0x140C -#define HUAWEI_PRODUCT_E140D 0x140D -#define HUAWEI_PRODUCT_E140E 0x140E -#define HUAWEI_PRODUCT_E140F 0x140F -#define HUAWEI_PRODUCT_E1410 0x1410 -#define HUAWEI_PRODUCT_E1411 0x1411 -#define HUAWEI_PRODUCT_E1412 0x1412 -#define HUAWEI_PRODUCT_E1413 0x1413 -#define HUAWEI_PRODUCT_E1414 0x1414 -#define HUAWEI_PRODUCT_E1415 0x1415 -#define HUAWEI_PRODUCT_E1416 0x1416 -#define HUAWEI_PRODUCT_E1417 0x1417 -#define HUAWEI_PRODUCT_E1418 0x1418 -#define HUAWEI_PRODUCT_E1419 0x1419 -#define HUAWEI_PRODUCT_E141A 0x141A -#define HUAWEI_PRODUCT_E141B 0x141B -#define HUAWEI_PRODUCT_E141C 0x141C -#define HUAWEI_PRODUCT_E141D 0x141D -#define HUAWEI_PRODUCT_E141E 0x141E -#define HUAWEI_PRODUCT_E141F 0x141F -#define HUAWEI_PRODUCT_E1420 0x1420 -#define HUAWEI_PRODUCT_E1421 0x1421 -#define HUAWEI_PRODUCT_E1422 0x1422 -#define HUAWEI_PRODUCT_E1423 0x1423 -#define HUAWEI_PRODUCT_E1424 0x1424 -#define HUAWEI_PRODUCT_E1425 0x1425 -#define HUAWEI_PRODUCT_E1426 0x1426 -#define HUAWEI_PRODUCT_E1427 0x1427 -#define HUAWEI_PRODUCT_E1428 0x1428 -#define HUAWEI_PRODUCT_E1429 0x1429 -#define HUAWEI_PRODUCT_E142A 0x142A -#define HUAWEI_PRODUCT_E142B 0x142B -#define HUAWEI_PRODUCT_E142C 0x142C -#define HUAWEI_PRODUCT_E142D 0x142D -#define HUAWEI_PRODUCT_E142E 0x142E -#define HUAWEI_PRODUCT_E142F 0x142F -#define HUAWEI_PRODUCT_E1430 0x1430 -#define HUAWEI_PRODUCT_E1431 0x1431 -#define HUAWEI_PRODUCT_E1432 0x1432 -#define HUAWEI_PRODUCT_E1433 0x1433 -#define HUAWEI_PRODUCT_E1434 0x1434 -#define HUAWEI_PRODUCT_E1435 0x1435 -#define HUAWEI_PRODUCT_E1436 0x1436 -#define HUAWEI_PRODUCT_E1437 0x1437 -#define HUAWEI_PRODUCT_E1438 0x1438 -#define HUAWEI_PRODUCT_E1439 0x1439 -#define HUAWEI_PRODUCT_E143A 0x143A -#define HUAWEI_PRODUCT_E143B 0x143B -#define HUAWEI_PRODUCT_E143C 0x143C -#define HUAWEI_PRODUCT_E143D 0x143D -#define HUAWEI_PRODUCT_E143E 0x143E -#define HUAWEI_PRODUCT_E143F 0x143F #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 -#define HUAWEI_PRODUCT_E14AC 0x14AC -#define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K4605 0x14C6 -#define HUAWEI_PRODUCT_K5005 0x14C8 -#define HUAWEI_PRODUCT_K3770 0x14C9 -#define HUAWEI_PRODUCT_K3771 0x14CA -#define HUAWEI_PRODUCT_K4510 0x14CB -#define HUAWEI_PRODUCT_K4511 0x14CC -#define HUAWEI_PRODUCT_ETS1220 0x1803 -#define HUAWEI_PRODUCT_E353 0x1506 -#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -615,104 +539,123 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, @@ -927,7 +870,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, @@ -1147,6 +1091,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -1297,8 +1245,8 @@ static struct usb_serial_driver option_1port_device = { .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = option_release, + .port_remove = usb_wwan_port_remove, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, @@ -1310,8 +1258,6 @@ static struct usb_serial_driver * const serial_drivers[] = { &option_1port_device, NULL }; -static bool debug; - struct option_private { u8 bInterfaceNumber; }; @@ -1414,8 +1360,6 @@ static void option_release(struct usb_serial *serial) struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct option_private *priv = intfdata->private; - usb_wwan_release(serial); - kfree(priv); kfree(intfdata); } @@ -1424,18 +1368,19 @@ static void option_instat_callback(struct urb *urb) { int err; int status = urb->status; - struct usb_serial_port *port = urb->context; + struct usb_serial_port *port = urb->context; + struct device *dev = &port->dev; struct usb_wwan_port_private *portdata = usb_get_serial_port_data(port); - dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); + dev_dbg(dev, "%s: urb %p port %p has data %p\n", __func__, urb, port, portdata); if (status == 0) { struct usb_ctrlrequest *req_pkt = (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt", __func__); + dev_dbg(dev, "%s: NULL req_pkt\n", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -1445,7 +1390,7 @@ static void option_instat_callback(struct urb *urb) urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); - dbg("%s: signal x%x", __func__, signals); + dev_dbg(dev, "%s: signal x%x\n", __func__, signals); old_dcd_state = portdata->dcd_state; portdata->cts_state = 1; @@ -1461,17 +1406,17 @@ static void option_instat_callback(struct urb *urb) tty_kref_put(tty); } } else { - dbg("%s: type %x req %x", __func__, + dev_dbg(dev, "%s: type %x req %x\n", __func__, req_pkt->bRequestType, req_pkt->bRequest); } } else - dev_err(&port->dev, "%s: error %d\n", __func__, status); + dev_err(dev, "%s: error %d\n", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN && status != -ENOENT) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) - dbg("%s: resubmit intr urb failed. (%d)", + dev_dbg(dev, "%s: resubmit intr urb failed. (%d)\n", __func__, err); } } @@ -1505,6 +1450,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages"); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 5976b65ab6ee..933241f03fd8 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -66,8 +66,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static bool debug; - /* requests */ #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) #define OTI6858_REQ_T_GET_STATUS 0x01 @@ -256,11 +254,11 @@ static void setup_line(struct work_struct *work) priv->setup_done = 1; spin_unlock_irqrestore(&priv->lock, flags); - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); } } @@ -310,11 +308,11 @@ static void send_data(struct work_struct *work) if (count == 0) { priv->flags.write_urb_in_use = 0; - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); } return; } @@ -325,8 +323,8 @@ static void send_data(struct work_struct *work) port->write_urb->transfer_buffer_length = count; result = usb_submit_urb(port->write_urb, GFP_NOIO); if (result != 0) { - dev_err_console(port, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); priv->flags.write_urb_in_use = 0; } @@ -404,10 +402,10 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty) static void oti6858_init_termios(struct tty_struct *tty) { - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 38400; - tty->termios->c_ospeed = 38400; + tty->termios = tty_std_termios; + tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios.c_ispeed = 38400; + tty->termios.c_ospeed = 38400; } static void oti6858_set_termios(struct tty_struct *tty, @@ -420,12 +418,10 @@ static void oti6858_set_termios(struct tty_struct *tty, __le16 divisor; int br; - if (!tty) { - dbg("%s(): no tty structures", __func__); + if (!tty) return; - } - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; spin_lock_irqsave(&priv->lock, flags); divisor = priv->pending_setup.divisor; @@ -560,11 +556,11 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); kfree(buf); - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" - " with error %d\n", __func__, result); + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); oti6858_close(port); return result; } @@ -586,14 +582,14 @@ static void oti6858_close(struct usb_serial_port *port) kfifo_reset_out(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); - dbg("%s(): after buf_clear()", __func__); + dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__); /* cancel scheduled setup */ cancel_delayed_work_sync(&priv->delayed_setup_work); cancel_delayed_work_sync(&priv->delayed_write_work); /* shutdown our urbs */ - dbg("%s(): shutting down urbs", __func__); + dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -607,8 +603,8 @@ static int oti6858_tiocmset(struct tty_struct *tty, unsigned long flags; u8 control; - dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)", - __func__, port->number, set, clear); + dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n", + __func__, set, clear); /* FIXME: check if this is correct (active high/low) */ spin_lock_irqsave(&priv->lock, flags); @@ -655,7 +651,7 @@ static int oti6858_tiocmget(struct tty_struct *tty) if ((pin_state & PIN_DCD) != 0) result |= TIOCM_CD; - dbg("%s() = 0x%08x", __func__, result); + dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result); return result; } @@ -700,15 +696,14 @@ static int oti6858_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)", - __func__, port->number, cmd, arg); + dev_dbg(&port->dev, "%s(cmd = 0x%04x, arg = 0x%08lx)\n", __func__, cmd, arg); switch (cmd) { case TIOCMIWAIT: - dbg("%s(): TIOCMIWAIT", __func__); + dev_dbg(&port->dev, "%s(): TIOCMIWAIT\n", __func__); return wait_modem_info(port, arg); default: - dbg("%s(): 0x%04x not supported", __func__, cmd); + dev_dbg(&port->dev, "%s(): 0x%04x not supported\n", __func__, cmd); break; } return -ENOIOCTLCMD; @@ -738,12 +733,12 @@ static void oti6858_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s(): urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s(): nonzero urb status received: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n", + __func__, status); break; } @@ -759,8 +754,7 @@ static void oti6858_read_int_callback(struct urb *urb) priv->transient = 4; priv->setup_done = 0; resubmit = 0; - dbg("%s(): scheduling setup_line()", - __func__); + dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); schedule_delayed_work(&priv->delayed_setup_work, 0); } } @@ -774,8 +768,7 @@ static void oti6858_read_int_callback(struct urb *urb) priv->transient = 4; priv->setup_done = 0; resubmit = 0; - dbg("%s(): scheduling setup_line()", - __func__); + dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); schedule_delayed_work(&priv->delayed_setup_work, 0); } } @@ -826,7 +819,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (resubmit) { int result; -/* dbg("%s(): submitting interrupt urb", __func__); */ +/* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result != 0) { dev_err(&urb->dev->dev, @@ -851,7 +844,7 @@ static void oti6858_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); if (status != 0) { - dbg("%s(): unable to handle the error, exiting", __func__); + dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__); return; } @@ -885,15 +878,13 @@ static void oti6858_write_bulk_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s(): urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status); priv->flags.write_urb_in_use = 0; return; default: /* error in the urb, so we have to resubmit it */ - dbg("%s(): nonzero write bulk status received: %d", - __func__, status); - dbg("%s(): overflow in write", __func__); + dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status); + dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__); port->write_urb->transfer_buffer_length = 1; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); @@ -908,7 +899,7 @@ static void oti6858_write_bulk_callback(struct urb *urb) priv->flags.write_urb_in_use = 0; /* schedule the interrupt urb if we are still open */ - dbg("%s(): submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { dev_err(&port->dev, "%s(): failed submitting int urb," @@ -922,7 +913,3 @@ MODULE_DESCRIPTION(OTI6858_DESCRIPTION); MODULE_AUTHOR(OTI6858_AUTHOR); MODULE_VERSION(OTI6858_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "enable debug output"); - diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 13b8dd6481f5..892ebdc7a364 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -36,8 +36,6 @@ */ #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, @@ -260,16 +258,16 @@ static void pl2303_set_termios(struct tty_struct *tty, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(tty->termios, old_termios)) + if (!tty_termios_hw_change(&tty->termios, old_termios)) return; - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; buf = kzalloc(7, GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - *tty->termios = *old_termios; + tty->termios = *old_termios; return; } @@ -741,7 +739,7 @@ static void pl2303_read_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); pl2303_update_line_status(port, data, actual_length); @@ -839,7 +837,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index a4edc7ee9c8a..9b1b96f2d095 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,8 +36,6 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 -#define PANTECH_PRODUCT_UML190_VZW 0x3716 -#define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ #define CMOTECH_VENDOR_ID 0x16d8 @@ -68,11 +66,9 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 8d103019d6aa..c3ddb65c05f2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,8 +22,6 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" -static bool debug; - #define DEVICE_G1K(v, p) \ USB_DEVICE(v, p), .driver_info = 1 @@ -199,43 +197,49 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) /* default to enabling interface */ altsetting = 0; - switch (ifnum) { - /* Composite mode; don't bind to the QMI/net interface as that - * gets handled by other drivers. - */ + /* Composite mode; don't bind to the QMI/net interface as that + * gets handled by other drivers. + */ + + if (is_gobi1k) { /* Gobi 1K USB layout: * 0: serial port (doesn't respond) * 1: serial port (doesn't respond) * 2: AT-capable modem port * 3: QMI/net - * - * Gobi 2K+ USB layout: + */ + if (ifnum == 2) + dev_dbg(dev, "Modem port found\n"); + else + altsetting = -1; + } else { + /* Gobi 2K+ USB layout: * 0: QMI/net * 1: DM/DIAG (use libqcdm from ModemManager for communication) * 2: AT-capable modem port * 3: NMEA */ - - case 1: - if (is_gobi1k) + switch (ifnum) { + case 0: + /* Don't claim the QMI/net interface */ altsetting = -1; - else + break; + case 1: dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n"); - break; - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 3: - if (is_gobi1k) - altsetting = -1; - else + break; + case 2: + dev_dbg(dev, "Modem port found\n"); + break; + case 3: /* * NMEA (serial line 9600 8N1) * # echo "\$GPS_START" > /dev/ttyUSBx * # echo "\$GPS_STOP" > /dev/ttyUSBx */ dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); + break; + } } done: @@ -262,8 +266,7 @@ static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Call usb_wwan release & free the private data allocated in qcprobe */ - usb_wwan_release(serial); + /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -283,8 +286,8 @@ static struct usb_serial_driver qcdevice = { .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = qc_release, + .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, .resume = usb_wwan_resume, @@ -300,6 +303,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL v2"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 151670b6b72a..2cdfdcc90b37 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -27,8 +27,6 @@ #include <linux/serial_reg.h> #include <linux/uaccess.h> -static bool debug; - /* default urb timeout for usb operations */ #define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT @@ -275,7 +273,7 @@ static void qt2_set_termios(struct tty_struct *tty, { struct usb_device *dev = port->serial->dev; struct qt2_port_private *port_priv; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; u16 baud; unsigned int cflag = termios->c_cflag; u16 new_lcr = 0; @@ -406,7 +404,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) port_priv->device_port = (u8) device_port; if (tty) - qt2_set_termios(tty, port, tty->termios); + qt2_set_termios(tty, port, &tty->termios); return 0; @@ -1089,7 +1087,7 @@ static int qt2_write(struct tty_struct *tty, data = write_urb->transfer_buffer; spin_lock_irqsave(&port_priv->urb_lock, flags); if (port_priv->urb_in_use == true) { - printk(KERN_INFO "qt2_write - urb is in use\n"); + dev_err(&port->dev, "qt2_write - urb is in use\n"); goto write_out; } @@ -1146,6 +1144,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 36e9d9fc0618..c949ce6ef0c6 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -62,6 +62,7 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> #include <linux/errno.h> @@ -81,11 +82,9 @@ #define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif -static bool debug; static bool safe = 1; static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; -#define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB Safe Encapsulated Serial" @@ -100,9 +99,6 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)"); module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified USB idProduct (required)"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - module_param(safe, bool, 0); MODULE_PARM_DESC(safe, "Turn Safe Encapsulation On/Off"); @@ -315,13 +311,9 @@ static int __init safe_init(void) { int i; - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - /* if we have vendor / product parameters patch them into id list */ if (vendor || product) { - printk(KERN_INFO KBUILD_MODNAME ": vendor: %x product: %x\n", - vendor, product); + pr_info("vendor: %x product: %x\n", vendor, product); for (i = 0; i < ARRAY_SIZE(id_table); i++) { if (!id_table[i].idVendor && !id_table[i].idProduct) { diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 0274710cced5..01d882cf3775 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -46,7 +46,6 @@ allocations > PAGE_SIZE and the number of packets in a page is an integer 512 is the largest possible packet on EHCI */ -static bool debug; static bool nmea; /* Used in interface blacklisting */ @@ -382,7 +381,7 @@ static int sierra_send_setup(struct usb_serial_port *port) static void sierra_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); sierra_send_setup(port); } @@ -518,7 +517,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, memcpy(buffer, buf, writesize); - usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer); + usb_serial_debug_data(&port->dev, __func__, writesize, buffer); usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, @@ -595,8 +594,8 @@ static void sierra_indat_callback(struct urb *urb) tty_flip_buffer_push(tty); tty_kref_put(tty); - usb_serial_debug_data(debug, &port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, data); } } else { dev_dbg(&port->dev, "%s: empty read urb" @@ -765,7 +764,6 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, usb_sndbulkpipe(serial->dev, endpoint) | dir, buf, len, callback, ctx); - /* debug */ dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, dir == USB_DIR_IN ? 'i' : 'o', urb, buf); } else { @@ -1082,6 +1080,3 @@ MODULE_LICENSE("GPL"); module_param(nmea, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(nmea, "NMEA streaming"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages"); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cad608984710..9716efe92955 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -33,8 +33,6 @@ #define DRIVER_VERSION "v0.10" #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" -static bool debug; - #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 #define SPCP8x5_008_VID 0x04fc @@ -316,10 +314,10 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) static void spcp8x5_init_termios(struct tty_struct *tty) { /* for the 1st time call this function */ - *(tty->termios) = tty_std_termios; - tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; - tty->termios->c_ispeed = 115200; - tty->termios->c_ospeed = 115200; + tty->termios = tty_std_termios; + tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios.c_ispeed = 115200; + tty->termios.c_ospeed = 115200; } /* set the serial param for transfer. we should check if we really need to @@ -330,7 +328,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; @@ -340,7 +338,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, /* check that they really want us to change something */ - if (!tty_termios_hw_change(tty->termios, old_termios)) + if (!tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ @@ -665,6 +663,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 3fee23bf0c14..015810b3785b 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,8 +46,6 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -static bool debug; - /* Version Information */ #define DRIVER_VERSION "v0.1" #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" @@ -135,7 +133,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, int result; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __func__); + dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__); return 0; /* no change */ } @@ -148,7 +146,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, result = ssu100_setregister(dev, 0, UART_MCR, urb_value); if (result < 0) - dbg("%s Error from MODEM_CTRL urb", __func__); + dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__); return result; } @@ -164,7 +162,7 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_getdevice(dev, data); if (result < 0) { - dbg("%s - get_device failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } @@ -172,25 +170,25 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_setdevice(dev, data); if (result < 0) { - dbg("%s - setdevice failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); if (result < 0) { - dbg("%s - set prebuffer level failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); if (result < 0) { - dbg("%s - set ATFprebuffer level failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_getdevice(dev, data); if (result < 0) { - dbg("%s - get_device failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } @@ -201,7 +199,7 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_setdevice(dev, data); if (result < 0) { - dbg("%s - setdevice failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } @@ -216,7 +214,7 @@ static void ssu100_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; - struct ktermios *termios = tty->termios; + struct ktermios *termios = &tty->termios; u16 baud, divisor, remainder; unsigned int cflag = termios->c_cflag; u16 urb_value = 0; /* will hold the new flags */ @@ -249,7 +247,7 @@ static void ssu100_set_termios(struct tty_struct *tty, if (!baud) baud = 9600; - dbg("%s - got baud = %d\n", __func__, baud); + dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud); divisor = MAX_BAUD_RATE / baud; @@ -261,7 +259,7 @@ static void ssu100_set_termios(struct tty_struct *tty, result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); if (result < 0) - dbg("%s - set uart failed", __func__); + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (cflag & CRTSCTS) result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, @@ -270,7 +268,7 @@ static void ssu100_set_termios(struct tty_struct *tty, result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, 0, 0); if (result < 0) - dbg("%s - set HW flow control failed", __func__); + dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__); if (I_IXOFF(tty) || I_IXON(tty)) { u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); @@ -282,7 +280,7 @@ static void ssu100_set_termios(struct tty_struct *tty, 0, 0); if (result < 0) - dbg("%s - set SW flow control failed", __func__); + dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__); } @@ -304,7 +302,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) QT_TRANSFER_IN, 0x01, 0, data, 2, 300); if (result < 0) { - dbg("%s - open failed %i", __func__, result); + dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result); kfree(data); return result; } @@ -319,10 +317,10 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) /* set to 9600 */ result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); if (result < 0) - dbg("%s - set uart failed", __func__); + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (tty) - ssu100_set_termios(tty, port, tty->termios); + ssu100_set_termios(tty, port, &tty->termios); return usb_serial_generic_open(tty, port); } @@ -423,7 +421,7 @@ static int ssu100_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -437,7 +435,7 @@ static int ssu100_ioctl(struct tty_struct *tty, break; } - dbg("%s arg not supported", __func__); + dev_dbg(&port->dev, "%s arg not supported\n", __func__); return -ENOIOCTLCMD; } @@ -668,6 +666,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index e53d2aac35c5..701fffa8431f 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -20,8 +20,6 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static bool debug; - static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, { }, @@ -71,8 +69,7 @@ static void symbol_int_callback(struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, - data); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length > 1) { data_length = urb->actual_length - 1; @@ -292,6 +289,3 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index a4404f5ad68e..6f49392cda5b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -40,7 +40,6 @@ /* Defines */ -#define TI_DRIVER_VERSION "v0.10" #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>" #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" @@ -141,8 +140,8 @@ static int ti_command_out_sync(struct ti_device *tdev, __u8 command, static int ti_command_in_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size); -static int ti_write_byte(struct ti_device *tdev, unsigned long addr, - __u8 mask, __u8 byte); +static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, + unsigned long addr, __u8 mask, __u8 byte); static int ti_download_firmware(struct ti_device *tdev); @@ -150,7 +149,6 @@ static int ti_download_firmware(struct ti_device *tdev); /* Data */ /* module parameters */ -static bool debug; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; @@ -277,7 +275,6 @@ static struct usb_serial_driver * const serial_drivers[] = { MODULE_AUTHOR(TI_DRIVER_AUTHOR); MODULE_DESCRIPTION(TI_DRIVER_DESC); -MODULE_VERSION(TI_DRIVER_VERSION); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("ti_3410.fw"); @@ -288,9 +285,6 @@ MODULE_FIRMWARE("mts_edge.fw"); MODULE_FIRMWARE("mts_mt9234mu.fw"); MODULE_FIRMWARE("mts_mt9234zba.fw"); -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); @@ -316,7 +310,6 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined); static int __init ti_init(void) { int i, j, c; - int ret; /* insert extra vendor and product ids */ c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1; @@ -339,11 +332,7 @@ static int __init ti_init(void) ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE; } - ret = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined); - if (ret == 0) - printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":" - TI_DRIVER_DESC "\n"); - return ret; + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined); } static void __exit ti_exit(void) @@ -364,10 +353,11 @@ static int ti_startup(struct usb_serial *serial) int i; - dbg("%s - product 0x%4X, num configurations %d, configuration value %d", - __func__, le16_to_cpu(dev->descriptor.idProduct), - dev->descriptor.bNumConfigurations, - dev->actconfig->desc.bConfigurationValue); + dev_dbg(&dev->dev, + "%s - product 0x%4X, num configurations %d, configuration value %d", + __func__, le16_to_cpu(dev->descriptor.idProduct), + dev->descriptor.bNumConfigurations, + dev->actconfig->desc.bConfigurationValue); /* create device structure */ tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); @@ -382,8 +372,8 @@ static int ti_startup(struct usb_serial *serial) /* determine device type */ if (usb_match_id(serial->interface, ti_id_table_3410)) tdev->td_is_3410 = 1; - dbg("%s - device type is %s", __func__, - tdev->td_is_3410 ? "3410" : "5052"); + dev_dbg(&dev->dev, "%s - device type is %s\n", __func__, + tdev->td_is_3410 ? "3410" : "5052"); /* if we have only 1 configuration, download firmware */ if (dev->descriptor.bNumConfigurations == 1) { @@ -501,37 +491,34 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) /* start interrupt urb the first time a port is opened on this device */ if (tdev->td_open_port_count == 0) { - dbg("%s - start interrupt in urb", __func__); + dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__); urb = tdev->td_serial->port[0]->interrupt_in_urb; if (!urb) { - dev_err(&port->dev, "%s - no interrupt urb\n", - __func__); + dev_err(&port->dev, "%s - no interrupt urb\n", __func__); status = -EINVAL; goto release_lock; } urb->context = tdev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err(&port->dev, - "%s - submit interrupt urb failed, %d\n", - __func__, status); + dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status); goto release_lock; } } if (tty) - ti_set_termios(tty, port, tty->termios); + ti_set_termios(tty, port, &tty->termios); - dbg("%s - sending TI_OPEN_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command, %d\n", - __func__, status); + __func__, status); goto unlink_int_urb; } - dbg("%s - sending TI_START_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { @@ -540,7 +527,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dbg("%s - sending TI_PURGE_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); if (status) { @@ -562,9 +549,9 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(dev, port->read_urb->pipe); if (tty) - ti_set_termios(tty, port, tty->termios); + ti_set_termios(tty, port, &tty->termios); - dbg("%s - sending TI_OPEN_PORT (2)", __func__); + dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { @@ -573,7 +560,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dbg("%s - sending TI_START_PORT (2)", __func__); + dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { @@ -583,7 +570,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) } /* start read urb */ - dbg("%s - start read urb", __func__); + dev_dbg(&port->dev, "%s - start read urb\n", __func__); urb = port->read_urb; if (!urb) { dev_err(&port->dev, "%s - no read urb\n", __func__); @@ -609,7 +596,7 @@ unlink_int_urb: usb_kill_urb(port->serial->port[0]->interrupt_in_urb); release_lock: mutex_unlock(&tdev->td_open_close_lock); - dbg("%s - exit %d", __func__, status); + dev_dbg(&port->dev, "%s - exit %d\n", __func__, status); return status; } @@ -637,7 +624,7 @@ static void ti_close(struct usb_serial_port *port) port_number = port->number - port->serial->minor; - dbg("%s - sending TI_CLOSE_PORT", __func__); + dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_CLOSE_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) @@ -664,7 +651,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, struct ti_port *tport = usb_get_serial_port_data(port); if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } @@ -693,7 +680,7 @@ static int ti_write_room(struct tty_struct *tty) room = kfifo_avail(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -712,7 +699,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -755,8 +742,7 @@ static int ti_get_icount(struct tty_struct *tty, struct ti_port *tport = usb_get_serial_port_data(port); struct async_icount cnow = tport->tp_icount; - dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", - __func__, port->number, + dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__, cnow.rx, cnow.tx); icount->cts = cnow.cts; @@ -782,22 +768,22 @@ static int ti_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd); if (tport == NULL) return -ENODEV; switch (cmd) { case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return ti_get_serial_info(tport, (struct serial_struct __user *)arg); case TIOCSSERIAL: - dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); return ti_set_serial_info(tty, tport, (struct serial_struct __user *)arg); case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = tport->tp_icount; while (1) { interruptible_sleep_on(&tport->tp_msr_wait); @@ -831,12 +817,12 @@ static void ti_set_termios(struct tty_struct *tty, int port_number = port->number - port->serial->minor; unsigned int mcr; - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; - dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag); - dbg("%s - old clfag %08x, old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); + dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag); + dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); if (tport == NULL) return; @@ -871,7 +857,7 @@ static void ti_set_termios(struct tty_struct *tty, } /* CMSPAR isn't supported by this driver */ - tty->termios->c_cflag &= ~CMSPAR; + tty->termios.c_cflag &= ~CMSPAR; if (cflag & PARENB) { if (cflag & PARODD) { @@ -926,8 +912,11 @@ static void ti_set_termios(struct tty_struct *tty, if ((cflag & CBAUD) != B0) tty_encode_baud_rate(tty, baud, baud); - dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", - __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); + dev_dbg(&port->dev, + "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", + __func__, baud, config->wBaudRate, config->wFlags, + config->bDataBits, config->bParity, config->bStopBits, + config->cXon, config->cXoff, config->bUartMode); cpu_to_be16s(&config->wBaudRate); cpu_to_be16s(&config->wFlags); @@ -979,7 +968,7 @@ static int ti_tiocmget(struct tty_struct *tty) | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); - dbg("%s - 0x%04X", __func__, result); + dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); return result; } @@ -1024,19 +1013,19 @@ static void ti_break(struct tty_struct *tty, int break_state) struct ti_port *tport = usb_get_serial_port_data(port); int status; - dbg("%s - state = %d", __func__, break_state); + dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state); if (tport == NULL) return; ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); - status = ti_write_byte(tport->tp_tdev, + status = ti_write_byte(port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); if (status) - dbg("%s - error setting break, %d", __func__, status); + dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status); } @@ -1061,18 +1050,17 @@ static void ti_interrupt_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __func__, status); + dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); tdev->td_urb_error = 1; return; default: - dev_err(dev, "%s - nonzero urb status, %d\n", - __func__, status); + dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); tdev->td_urb_error = 1; goto exit; } if (length != 2) { - dbg("%s - bad packet size, %d", __func__, length); + dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length); goto exit; } @@ -1084,8 +1072,8 @@ static void ti_interrupt_callback(struct urb *urb) port_number = TI_GET_PORT_FROM_CODE(data[0]); function = TI_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, data 0x%02X", - __func__, port_number, function, data[1]); + dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n", + __func__, port_number, function, data[1]); if (port_number >= serial->num_ports) { dev_err(dev, "%s - bad port number, %d\n", @@ -1102,12 +1090,12 @@ static void ti_interrupt_callback(struct urb *urb) switch (function) { case TI_CODE_DATA_ERROR: dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", - __func__, port_number, data[1]); + __func__, port_number, data[1]); break; case TI_CODE_MODEM_STATUS: msr = data[1]; - dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr); + dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr); ti_handle_new_msr(tport, msr); break; @@ -1140,7 +1128,7 @@ static void ti_bulk_in_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __func__, status); + dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; @@ -1162,11 +1150,11 @@ static void ti_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&port->port); if (tty) { if (urb->actual_length) { - usb_serial_debug_data(debug, dev, __func__, - urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(dev, __func__, urb->actual_length, + urb->transfer_buffer); if (!tport->tp_is_open) - dbg("%s - port closed, dropping data", + dev_dbg(dev, "%s - port closed, dropping data\n", __func__); else ti_recv(&urb->dev->dev, tty, @@ -1208,7 +1196,7 @@ static void ti_bulk_out_callback(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("%s - urb shutting down, %d", __func__, status); + dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; @@ -1268,8 +1256,8 @@ static void ti_send(struct ti_port *tport) spin_unlock_irqrestore(&tport->tp_lock, flags); - usb_serial_debug_data(debug, &port->dev, __func__, count, - port->write_urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, count, + port->write_urb->transfer_buffer); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, @@ -1307,7 +1295,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) unsigned long flags; int status; - status = ti_write_byte(tport->tp_tdev, + status = ti_write_byte(tport->tp_port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_MCR, TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr); @@ -1344,7 +1332,7 @@ static int ti_get_lsr(struct ti_port *tport) goto free_data; } - dbg("%s - lsr 0x%02X", __func__, data->bLSR); + dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR); tport->tp_lsr = data->bLSR; @@ -1401,7 +1389,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) struct tty_struct *tty; unsigned long flags; - dbg("%s - msr 0x%02X", __func__, msr); + dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr); if (msr & TI_MSR_DELTA_MASK) { spin_lock_irqsave(&tport->tp_lock, flags); @@ -1560,21 +1548,21 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command, } -static int ti_write_byte(struct ti_device *tdev, unsigned long addr, - __u8 mask, __u8 byte) +static int ti_write_byte(struct usb_serial_port *port, + struct ti_device *tdev, unsigned long addr, + __u8 mask, __u8 byte) { int status; unsigned int size; struct ti_write_data_bytes *data; - struct device *dev = &tdev->td_serial->dev->dev; - dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", - __func__, addr, mask, byte); + dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__, + addr, mask, byte); size = sizeof(struct ti_write_data_bytes) + 2; data = kmalloc(size, GFP_KERNEL); if (!data) { - dev_err(dev, "%s - out of memory\n", __func__); + dev_err(&port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -1590,7 +1578,7 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr, (__u8 *)data, size); if (status < 0) - dev_err(dev, "%s - failed, %d\n", __func__, status); + dev_err(&port->dev, "%s - failed, %d\n", __func__, status); kfree(data); @@ -1615,7 +1603,7 @@ static int ti_do_download(struct usb_device *dev, int pipe, - sizeof(struct ti_firmware_header))); header->bCheckSum = cs; - dbg("%s - downloading firmware", __func__); + dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__); for (pos = 0; pos < size; pos += done) { len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); status = usb_bulk_msg(dev, pipe, buffer + pos, len, @@ -1691,7 +1679,7 @@ static int ti_download_firmware(struct ti_device *tdev) status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } else { - dbg("%s ENOMEM\n", __func__); + dev_dbg(&dev->dev, "%s ENOMEM\n", __func__); status = -ENOMEM; } release_firmware(fw_p); @@ -1701,7 +1689,7 @@ static int ti_download_firmware(struct ti_device *tdev) return status; } - dbg("%s - download successful", __func__); + dev_dbg(&dev->dev, "%s - download successful\n", __func__); return 0; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 27483f91a4a3..73b8e0569164 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -17,6 +17,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> @@ -37,10 +39,7 @@ #include <linux/kfifo.h> #include "pl2303.h" -/* - * Version Information - */ -#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" +#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" #define DRIVER_DESC "USB Serial Driver core" /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead @@ -50,7 +49,6 @@ drivers depend on it. */ -static bool debug; /* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); @@ -87,7 +85,7 @@ static struct usb_serial *get_free_serial(struct usb_serial *serial, unsigned int i, j; int good_spot; - dbg("%s %d", __func__, num_ports); + dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports); *minor = 0; mutex_lock(&table_lock); @@ -107,7 +105,7 @@ static struct usb_serial *get_free_serial(struct usb_serial *serial, *minor = i; j = 0; - dbg("%s - minor base = %d", __func__, *minor); + dev_dbg(&serial->interface->dev, "%s - minor base = %d\n", __func__, *minor); for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) { serial_table[i] = serial; serial->port[j++]->number = i; @@ -123,8 +121,6 @@ static void return_serial(struct usb_serial *serial) { int i; - dbg("%s", __func__); - mutex_lock(&table_lock); for (i = 0; i < serial->num_ports; ++i) serial_table[serial->minor + i] = NULL; @@ -139,8 +135,6 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg("%s - %s", __func__, serial->type->description); - /* return the minor range that this device had */ if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); @@ -191,8 +185,6 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) struct usb_serial_port *port; int retval = -ENODEV; - dbg("%s", __func__); - serial = usb_serial_get_by_index(idx); if (!serial) return retval; @@ -207,7 +199,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_get_interface; - retval = tty_standard_install(driver, tty); + retval = tty_port_install(&port->port, driver, tty); if (retval) goto error_init_termios; @@ -256,7 +248,7 @@ static int serial_open(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); return tty_port_open(&port->port, tty, filp); } @@ -287,14 +279,16 @@ static void serial_down(struct tty_port *tport) static void serial_hangup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); tty_port_hangup(&port->port); } static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); tty_port_close(&port->port, tty, filp); } @@ -305,8 +299,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) * Do the resource freeing and refcount dropping for the port. * Avoid freeing the console. * - * Called asynchronously after the last tty kref is dropped, - * and the tty layer has already done the tty_shutdown(tty); + * Called asynchronously after the last tty kref is dropped. */ static void serial_cleanup(struct tty_struct *tty) { @@ -320,7 +313,7 @@ static void serial_cleanup(struct tty_struct *tty) if (port->port.console) return; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); tty->driver_data = NULL; @@ -345,7 +338,8 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, if (port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dbg("%s - port %d, %d byte(s)", __func__, port->number, count); + dev_dbg(tty->dev, "%s - port %d, %d byte(s)\n", __func__, + port->number, count); /* pass on to the driver specific version of this function */ retval = port->serial->type->write(tty, port, buf, count); @@ -358,7 +352,8 @@ exit: static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function */ return port->serial->type->write_room(tty); } @@ -366,7 +361,8 @@ static int serial_write_room(struct tty_struct *tty) static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* if the device was unplugged then any remaining characters fell out of the connector ;) */ @@ -379,7 +375,8 @@ static int serial_chars_in_buffer(struct tty_struct *tty) static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) @@ -389,7 +386,8 @@ static void serial_throttle(struct tty_struct *tty) static void serial_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) @@ -402,7 +400,8 @@ static int serial_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(tty->dev, "%s - port %d, cmd 0x%.4x\n", __func__, + port->number, cmd); /* pass on to the driver specific version of this function if it is available */ @@ -416,21 +415,22 @@ static int serial_ioctl(struct tty_struct *tty, static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->set_termios) port->serial->type->set_termios(tty, port, old); else - tty_termios_copy_hw(tty->termios, old); + tty_termios_copy_hw(&tty->termios, old); } static int serial_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); /* pass on to the driver specific version of this function if it is available */ @@ -445,7 +445,6 @@ static int serial_proc_show(struct seq_file *m, void *v) int i; char tmp[40]; - dbg("%s", __func__); seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS; ++i) { serial = usb_serial_get_by_index(i); @@ -490,7 +489,7 @@ static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty); @@ -502,7 +501,7 @@ static int serial_tiocmset(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, set, clear); @@ -514,7 +513,7 @@ static int serial_get_icount(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); if (port->serial->type->get_icount) return port->serial->type->get_icount(tty, icount); @@ -538,12 +537,12 @@ static void usb_serial_port_work(struct work_struct *work) container_of(work, struct usb_serial_port, work); struct tty_struct *tty; - dbg("%s - port %d", __func__, port->number); - tty = tty_port_tty_get(&port->port); if (!tty) return; + dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + tty_wakeup(tty); tty_kref_put(tty); } @@ -576,7 +575,7 @@ static void port_release(struct device *dev) struct usb_serial_port *port = to_usb_serial_port(dev); int i; - dbg ("%s - %s", __func__, dev_name(dev)); + dev_dbg(dev, "%s\n", __func__); /* * Stop all the traffic before cancelling the work, so that @@ -645,12 +644,12 @@ static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv, id = usb_match_id(intf, drv->id_table); if (id) { - dbg("static descriptor matches"); + dev_dbg(&intf->dev, "static descriptor matches\n"); goto exit; } id = match_dynamic_id(intf, drv); if (id) - dbg("dynamic descriptor matches"); + dev_dbg(&intf->dev, "dynamic descriptor matches\n"); exit: return id; } @@ -704,6 +703,7 @@ static const struct tty_port_operations serial_port_ops = { static int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { + struct device *ddev = &interface->dev; struct usb_device *dev = interface_to_usbdev(interface); struct usb_serial *serial = NULL; struct usb_serial_port *port; @@ -730,13 +730,13 @@ static int usb_serial_probe(struct usb_interface *interface, type = search_serial_device(interface); if (!type) { mutex_unlock(&table_lock); - dbg("none matched"); + dev_dbg(ddev, "none matched\n"); return -ENODEV; } if (!try_module_get(type->driver.owner)) { mutex_unlock(&table_lock); - dev_err(&interface->dev, "module get failed, exiting\n"); + dev_err(ddev, "module get failed, exiting\n"); return -EIO; } mutex_unlock(&table_lock); @@ -744,7 +744,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial = create_serial(dev, interface, type); if (!serial) { module_put(type->driver.owner); - dev_err(&interface->dev, "%s - out of memory\n", __func__); + dev_err(ddev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -756,7 +756,7 @@ static int usb_serial_probe(struct usb_interface *interface, retval = type->probe(serial, id); if (retval) { - dbg("sub driver rejected device"); + dev_dbg(ddev, "sub driver rejected device\n"); usb_serial_put(serial); module_put(type->driver.owner); return retval; @@ -771,28 +771,28 @@ static int usb_serial_probe(struct usb_interface *interface, if (usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - dbg("found bulk in on endpoint %d", i); + dev_dbg(ddev, "found bulk in on endpoint %d\n", i); bulk_in_endpoint[num_bulk_in] = endpoint; ++num_bulk_in; } if (usb_endpoint_is_bulk_out(endpoint)) { /* we found a bulk out endpoint */ - dbg("found bulk out on endpoint %d", i); + dev_dbg(ddev, "found bulk out on endpoint %d\n", i); bulk_out_endpoint[num_bulk_out] = endpoint; ++num_bulk_out; } if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ - dbg("found interrupt in on endpoint %d", i); + dev_dbg(ddev, "found interrupt in on endpoint %d\n", i); interrupt_in_endpoint[num_interrupt_in] = endpoint; ++num_interrupt_in; } if (usb_endpoint_is_int_out(endpoint)) { /* we found an interrupt out endpoint */ - dbg("found interrupt out on endpoint %d", i); + dev_dbg(ddev, "found interrupt out on endpoint %d\n", i); interrupt_out_endpoint[num_interrupt_out] = endpoint; ++num_interrupt_out; } @@ -816,7 +816,7 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint = &iface_desc->endpoint[i].desc; if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ - dbg("found interrupt in for Prolific device on separate interface"); + dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); interrupt_in_endpoint[num_interrupt_in] = endpoint; ++num_interrupt_in; } @@ -828,7 +828,7 @@ static int usb_serial_probe(struct usb_interface *interface, * properly during a later invocation of usb_serial_probe */ if (num_bulk_in == 0 || num_bulk_out == 0) { - dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); + dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); usb_serial_put(serial); module_put(type->driver.owner); return -ENODEV; @@ -841,14 +841,13 @@ static int usb_serial_probe(struct usb_interface *interface, if (type == &usb_serial_generic_device) { num_ports = num_bulk_out; if (num_ports == 0) { - dev_err(&interface->dev, - "Generic device with no bulk out, not allowed.\n"); + dev_err(ddev, "Generic device with no bulk out, not allowed.\n"); usb_serial_put(serial); module_put(type->driver.owner); return -EIO; } - dev_info(&interface->dev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); - dev_info(&interface->dev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); + dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); + dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); } #endif if (!num_ports) { @@ -866,8 +865,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->num_interrupt_out = num_interrupt_out; /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", - type->description); + dev_info(ddev, "%s converter detected\n", type->description); /* create our ports, we need as many as the max endpoints */ /* we don't use num_ports here because some devices have more @@ -878,8 +876,7 @@ static int usb_serial_probe(struct usb_interface *interface, max_endpoints = max(max_endpoints, (int)serial->num_ports); serial->num_port_pointers = max_endpoints; - dbg("%s - setting up %d port structures for this device", - __func__, max_endpoints); + dev_dbg(ddev, "setting up %d port structures for this device", max_endpoints); for (i = 0; i < max_endpoints; ++i) { port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); if (!port) @@ -912,15 +909,13 @@ static int usb_serial_probe(struct usb_interface *interface, set_bit(j, &port->read_urbs_free); port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); if (!port->read_urbs[j]) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } port->bulk_in_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); if (!port->bulk_in_buffers[j]) { - dev_err(&interface->dev, - "Couldn't allocate bulk_in_buffer\n"); + dev_err(ddev, "Couldn't allocate bulk_in_buffer\n"); goto probe_error; } usb_fill_bulk_urb(port->read_urbs[j], dev, @@ -950,15 +945,13 @@ static int usb_serial_probe(struct usb_interface *interface, set_bit(j, &port->write_urbs_free); port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urbs[j]) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } port->bulk_out_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); if (!port->bulk_out_buffers[j]) { - dev_err(&interface->dev, - "Couldn't allocate bulk_out_buffer\n"); + dev_err(ddev, "Couldn't allocate bulk_out_buffer\n"); goto probe_error; } usb_fill_bulk_urb(port->write_urbs[j], dev, @@ -979,8 +972,7 @@ static int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_in_urb) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } buffer_size = usb_endpoint_maxp(endpoint); @@ -989,8 +981,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!port->interrupt_in_buffer) { - dev_err(&interface->dev, - "Couldn't allocate interrupt_in_buffer\n"); + dev_err(ddev, "Couldn't allocate interrupt_in_buffer\n"); goto probe_error; } usb_fill_int_urb(port->interrupt_in_urb, dev, @@ -1001,7 +992,7 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint->bInterval); } } else if (num_interrupt_in) { - dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined"); + dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n"); } if (serial->type->write_int_callback) { @@ -1010,8 +1001,7 @@ static int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_out_urb) { - dev_err(&interface->dev, - "No free urbs available\n"); + dev_err(ddev, "No free urbs available\n"); goto probe_error; } buffer_size = usb_endpoint_maxp(endpoint); @@ -1021,8 +1011,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!port->interrupt_out_buffer) { - dev_err(&interface->dev, - "Couldn't allocate interrupt_out_buffer\n"); + dev_err(ddev, "Couldn't allocate interrupt_out_buffer\n"); goto probe_error; } usb_fill_int_urb(port->interrupt_out_urb, dev, @@ -1033,7 +1022,7 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint->bInterval); } } else if (num_interrupt_out) { - dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined"); + dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n"); } usb_set_intfdata(interface, serial); @@ -1061,7 +1050,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->disconnected = 1; if (get_free_serial(serial, num_ports, &minor) == NULL) { - dev_err(&interface->dev, "No more free serial devices\n"); + dev_err(ddev, "No more free serial devices\n"); goto probe_error; } serial->minor = minor; @@ -1070,18 +1059,17 @@ static int usb_serial_probe(struct usb_interface *interface, for (i = 0; i < num_ports; ++i) { port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->number); - dbg ("%s - registering %s", __func__, dev_name(&port->dev)); + dev_dbg(ddev, "registering %s", dev_name(&port->dev)); device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); if (retval) - dev_err(&port->dev, "Error registering port device, " - "continuing\n"); + dev_err(ddev, "Error registering port device, continuing\n"); } serial->disconnected = 0; - usb_serial_console_init(debug, minor); + usb_serial_console_init(minor); exit: module_put(type->driver.owner); return 0; @@ -1100,7 +1088,6 @@ static void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial_port *port; usb_serial_console_disconnect(serial); - dbg("%s", __func__); mutex_lock(&serial->disc_mutex); /* must set a flag, to signal subdrivers */ @@ -1235,8 +1222,7 @@ static int __init usb_serial_init(void) result = bus_register(&usb_serial_bus_type); if (result) { - printk(KERN_ERR "usb-serial: %s - registering bus driver " - "failed\n", __func__); + pr_err("%s - registering bus driver failed\n", __func__); goto exit_bus; } @@ -1256,29 +1242,24 @@ static int __init usb_serial_init(void) tty_set_operations(usb_serial_tty_driver, &serial_ops); result = tty_register_driver(usb_serial_tty_driver); if (result) { - printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n", - __func__); + pr_err("%s - tty_register_driver failed\n", __func__); goto exit_reg_driver; } /* register the USB driver */ result = usb_register(&usb_serial_driver); if (result < 0) { - printk(KERN_ERR "usb-serial: %s - usb_register failed\n", - __func__); + pr_err("%s - usb_register failed\n", __func__); goto exit_tty; } /* register the generic driver, if we should */ - result = usb_serial_generic_register(debug); + result = usb_serial_generic_register(); if (result < 0) { - printk(KERN_ERR "usb-serial: %s - registering generic " - "driver failed\n", __func__); + pr_err("%s - registering generic driver failed\n", __func__); goto exit_generic; } - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); - return result; exit_generic: @@ -1291,8 +1272,7 @@ exit_reg_driver: bus_unregister(&usb_serial_bus_type); exit_bus: - printk(KERN_ERR "usb-serial: %s - returning with error %d\n", - __func__, result); + pr_err("%s - returning with error %d\n", __func__, result); put_tty_driver(usb_serial_tty_driver); return result; } @@ -1318,7 +1298,7 @@ module_exit(usb_serial_exit); do { \ if (!type->function) { \ type->function = usb_serial_generic_##function; \ - dbg("Had to override the " #function \ + pr_debug("Had to override the " #function \ " usb serial operation with the generic one.");\ } \ } while (0) @@ -1361,12 +1341,10 @@ static int usb_serial_register(struct usb_serial_driver *driver) retval = usb_serial_bus_register(driver); if (retval) { - printk(KERN_ERR "usb-serial: problem %d when registering " - "driver %s\n", retval, driver->description); + pr_err("problem %d when registering driver %s\n", retval, driver->description); list_del(&driver->driver_list); } else - printk(KERN_INFO "USB Serial support registered for %s\n", - driver->description); + pr_info("USB Serial support registered for %s\n", driver->description); mutex_unlock(&table_lock); return retval; @@ -1374,8 +1352,7 @@ static int usb_serial_register(struct usb_serial_driver *driver) static void usb_serial_deregister(struct usb_serial_driver *device) { - printk(KERN_INFO "USB Serial deregistering driver %s\n", - device->description); + pr_info("USB Serial deregistering driver %s\n", device->description); mutex_lock(&table_lock); list_del(&device->driver_list); usb_serial_bus_deregister(device); @@ -1426,9 +1403,10 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] /* we only set the reset_resume field if the serial_driver has one */ for (sd = serial_drivers; *sd; ++sd) { - if ((*sd)->reset_resume) + if ((*sd)->reset_resume) { udriver->reset_resume = usb_serial_reset_resume; break; + } } rc = usb_register(udriver); @@ -1478,6 +1456,3 @@ EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index c47b6ec03063..1f034d2397c6 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -9,8 +9,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); extern void usb_wwan_close(struct usb_serial_port *port); extern int usb_wwan_startup(struct usb_serial *serial); -extern void usb_wwan_disconnect(struct usb_serial *serial); -extern void usb_wwan_release(struct usb_serial *serial); +extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index f35971dff4a5..e42aa398ed37 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -37,8 +37,6 @@ #include <linux/serial.h> #include "usb-wwan.h" -static bool debug; - void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { struct usb_serial *serial = port->serial; @@ -67,7 +65,7 @@ void usb_wwan_set_termios(struct tty_struct *tty, struct usb_wwan_intf_private *intfdata = port->serial->private; /* Doesn't support option setting */ - tty_termios_copy_hw(tty->termios, old_termios); + tty_termios_copy_hw(&tty->termios, old_termios); if (intfdata->send_setup) intfdata->send_setup(port); @@ -178,7 +176,7 @@ int usb_wwan_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -191,7 +189,7 @@ int usb_wwan_ioctl(struct tty_struct *tty, break; } - dbg("%s arg not supported", __func__); + dev_dbg(&port->dev, "%s arg not supported\n", __func__); return -ENOIOCTLCMD; } @@ -212,7 +210,7 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, portdata = usb_get_serial_port_data(port); intfdata = port->serial->private; - dbg("%s: write (%d chars)", __func__, count); + dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); i = 0; left = count; @@ -229,8 +227,8 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, usb_unlink_urb(this_urb); continue; } - dbg("%s: endpoint %d buf %d", __func__, - usb_pipeendpoint(this_urb->pipe), i); + dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, + usb_pipeendpoint(this_urb->pipe), i); err = usb_autopm_get_interface_async(port->serial->interface); if (err < 0) @@ -249,8 +247,9 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, spin_unlock_irqrestore(&intfdata->susp_lock, flags); err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err) { - dbg("usb_submit_urb %p (write bulk) failed " - "(%d)", this_urb, err); + dev_dbg(&port->dev, + "usb_submit_urb %p (write bulk) failed (%d)\n", + this_urb, err); clear_bit(i, &portdata->out_busy); spin_lock_irqsave(&intfdata->susp_lock, flags); intfdata->in_flight--; @@ -267,7 +266,7 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, } count -= left; - dbg("%s: wrote (did %d)", __func__, count); + dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); return count; } EXPORT_SYMBOL(usb_wwan_write); @@ -278,15 +277,17 @@ static void usb_wwan_indat_callback(struct urb *urb) int endpoint; struct usb_serial_port *port; struct tty_struct *tty; + struct device *dev; unsigned char *data = urb->transfer_buffer; int status = urb->status; endpoint = usb_pipeendpoint(urb->pipe); port = urb->context; + dev = &port->dev; if (status) { - dbg("%s: nonzero status: %d on endpoint %02x.", - __func__, status, endpoint); + dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", + __func__, status, endpoint); } else { tty = tty_port_tty_get(&port->port); if (tty) { @@ -295,7 +296,7 @@ static void usb_wwan_indat_callback(struct urb *urb) urb->actual_length); tty_flip_buffer_push(tty); } else - dbg("%s: empty read urb received", __func__); + dev_dbg(dev, "%s: empty read urb received\n", __func__); tty_kref_put(tty); } @@ -303,8 +304,7 @@ static void usb_wwan_indat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) { if (err != -EPERM) { - printk(KERN_ERR "%s: resubmit read urb failed. " - "(%d)", __func__, err); + dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err); /* busy also in error unless we are killed */ usb_mark_last_busy(port->serial->dev); } @@ -356,7 +356,7 @@ int usb_wwan_write_room(struct tty_struct *tty) data_len += OUT_BUFLEN; } - dbg("%s: %d", __func__, data_len); + dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); return data_len; } EXPORT_SYMBOL(usb_wwan_write_room); @@ -378,7 +378,7 @@ int usb_wwan_chars_in_buffer(struct tty_struct *tty) if (this_urb && test_bit(i, &portdata->out_busy)) data_len += this_urb->transfer_buffer_length; } - dbg("%s: %d", __func__, data_len); + dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); return data_len; } EXPORT_SYMBOL(usb_wwan_chars_in_buffer); @@ -401,8 +401,8 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) continue; err = usb_submit_urb(urb, GFP_KERNEL); if (err) { - dbg("%s: submit urb %d failed (%d) %d", - __func__, i, err, urb->transfer_buffer_length); + dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n", + __func__, i, err, urb->transfer_buffer_length); } } @@ -458,7 +458,9 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s: alloc for endpoint %d failed.", __func__, endpoint); + dev_dbg(&serial->interface->dev, + "%s: alloc for endpoint %d failed.\n", __func__, + endpoint); return NULL; } @@ -522,8 +524,8 @@ int usb_wwan_startup(struct usb_serial *serial) port = serial->port[i]; portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); if (!portdata) { - dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.", - __func__, i); + dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n", + __func__, i); return 1; } init_usb_anchor(&portdata->delayed); @@ -548,7 +550,8 @@ int usb_wwan_startup(struct usb_serial *serial) continue; err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) - dbg("%s: submit irq_in urb failed %d", __func__, err); + dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", + __func__, err); } usb_wwan_setup_urbs(serial); return 0; @@ -565,62 +568,52 @@ bail_out_error: } EXPORT_SYMBOL(usb_wwan_startup); -static void stop_read_write_urbs(struct usb_serial *serial) +int usb_wwan_port_remove(struct usb_serial_port *port) { - int i, j; - struct usb_serial_port *port; + int i; struct usb_wwan_port_private *portdata; - /* Stop reading/writing urbs */ - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); - for (j = 0; j < N_OUT_URB; j++) - usb_kill_urb(portdata->out_urbs[j]); + portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); + + /* Stop reading/writing urbs and free them */ + for (i = 0; i < N_IN_URB; i++) { + usb_kill_urb(portdata->in_urbs[i]); + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } + for (i = 0; i < N_OUT_URB; i++) { + usb_kill_urb(portdata->out_urbs[i]); + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); } -} -void usb_wwan_disconnect(struct usb_serial *serial) -{ - stop_read_write_urbs(serial); + /* Now free port private data */ + kfree(portdata); + return 0; } -EXPORT_SYMBOL(usb_wwan_disconnect); +EXPORT_SYMBOL(usb_wwan_port_remove); -void usb_wwan_release(struct usb_serial *serial) +#ifdef CONFIG_PM +static void stop_read_write_urbs(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; struct usb_wwan_port_private *portdata; - /* Now free them */ + /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - - for (j = 0; j < N_IN_URB; j++) { - usb_free_urb(portdata->in_urbs[j]); - free_page((unsigned long) - portdata->in_buffer[j]); - portdata->in_urbs[j] = NULL; - } - for (j = 0; j < N_OUT_URB; j++) { - usb_free_urb(portdata->out_urbs[j]); - kfree(portdata->out_buffer[j]); - portdata->out_urbs[j] = NULL; - } - } - - /* Now free per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); + if (!portdata) + continue; + for (j = 0; j < N_IN_URB; j++) + usb_kill_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + usb_kill_urb(portdata->out_urbs[j]); } } -EXPORT_SYMBOL(usb_wwan_release); -#ifdef CONFIG_PM int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) { struct usb_wwan_intf_private *intfdata = serial->private; @@ -693,11 +686,11 @@ int usb_wwan_resume(struct usb_serial *serial) for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!port->interrupt_in_urb) { - dbg("%s: No interrupt URB for port %d", __func__, i); + dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__); continue; } err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); - dbg("Submitted interrupt URB for port %d (result %d)", i, err); + dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err); if (err < 0) { dev_err(&port->dev, "%s: Error %d for interrupt URB\n", __func__, err); @@ -712,7 +705,7 @@ int usb_wwan_resume(struct usb_serial *serial) /* skip closed ports */ spin_lock_irq(&intfdata->susp_lock); - if (!portdata->opened) { + if (!portdata || !portdata->opened) { spin_unlock_irq(&intfdata->susp_lock); continue; } @@ -743,6 +736,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages"); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index f253c91383da..1129aa73c23e 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -51,9 +51,6 @@ static int palm_os_3_probe(struct usb_serial *serial, static int palm_os_4_probe(struct usb_serial *serial, const struct usb_device_id *id); -/* Parameters that may be passed into the module. */ -static bool debug; - static struct usb_device_id id_table [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), .driver_info = (kernel_ulong_t)&palm_os_3_probe }, @@ -310,8 +307,8 @@ static void visor_read_int_callback(struct urb *urb) * Rumor has it this endpoint is used to notify when data * is ready to be read from the bulk ones. */ - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, urb->transfer_buffer); + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); exit: result = usb_submit_urb(urb, GFP_ATOMIC); @@ -443,8 +440,7 @@ static int palm_os_4_probe(struct usb_serial *serial, dev_err(dev, "%s - error %d getting connection info\n", __func__, retval); else - usb_serial_debug_data(debug, &serial->dev->dev, __func__, - retval, transfer_buffer); + usb_serial_debug_data(dev, __func__, retval, transfer_buffer); kfree(transfer_buffer); return 0; @@ -625,6 +621,3 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 473635e7f5db..346c7efc20b0 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -32,12 +32,9 @@ #include <linux/serial_reg.h> #include <linux/serial.h> #include <linux/usb/serial.h> -#include <linux/firmware.h> -#include <linux/ihex.h> +#include <linux/usb/ezusb.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -static bool debug; - #ifndef CMSPAR #define CMSPAR 0 #endif @@ -195,84 +192,15 @@ static int firm_report_tx_done(struct usb_serial_port *port); static int whiteheat_firmware_download(struct usb_serial *serial, const struct usb_device_id *id) { - int response, ret = -ENOENT; - const struct firmware *loader_fw = NULL, *firmware_fw = NULL; - const struct ihex_binrec *record; + int response; - if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat.fw\" failed\n", __func__); - goto out; - } - if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat_loader.fw\" failed\n", - __func__); - goto out; + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; } - ret = 0; - response = ezusb_set_reset (serial, 1); - - record = (const struct ihex_binrec *)loader_fw->data; - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for loader (%d %04X %p %d)\n", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); - } - - response = ezusb_set_reset(serial, 0); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) - record = ihex_next_binrec(record); - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa3); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for first firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - - response = ezusb_set_reset(serial, 1); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for second firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - ret = 0; - response = ezusb_set_reset (serial, 0); - out: - release_firmware(loader_fw); - release_firmware(firmware_fw); - return ret; + return -ENOENT; } @@ -533,7 +461,7 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - cmd 0x%.4x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -580,7 +508,7 @@ static void command_port_write_callback(struct urb *urb) int status = urb->status; if (status) { - dbg("nonzero urb status: %d", status); + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); return; } } @@ -596,19 +524,18 @@ static void command_port_read_callback(struct urb *urb) command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg("%s - command_info is NULL, exiting.", __func__); + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } if (status) { - dbg("%s - nonzero urb status: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } - usb_serial_debug_data(debug, &command_port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -619,19 +546,19 @@ static void command_port_read_callback(struct urb *urb) } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ - dbg("%s - event received", __func__); + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else - dbg("%s - bad reply from firmware", __func__); + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); /* Continue trying to always read */ result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } @@ -645,11 +572,12 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; + struct device *dev = &port->dev; __u8 *transfer_buffer; int retval = 0; int t; - dbg("%s - command %d", __func__, command); + dev_dbg(dev, "%s - command %d\n", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); @@ -662,7 +590,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, command_port->write_urb->transfer_buffer_length = datasize + 1; retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { - dbg("%s - submit urb failed", __func__); + dev_dbg(dev, "%s - submit urb failed\n", __func__); goto exit; } @@ -673,19 +601,19 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { - dbg("%s - command timed out.", __func__); + dev_dbg(dev, "%s - command timed out.\n", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { - dbg("%s - command failed.", __func__); + dev_dbg(dev, "%s - command failed.\n", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { - dbg("%s - command completed.", __func__); + dev_dbg(dev, "%s - command completed.\n", __func__); switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); @@ -723,8 +651,9 @@ static int firm_close(struct usb_serial_port *port) static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; port_settings.port = port->number + 1; @@ -736,7 +665,7 @@ static void firm_setup_port(struct tty_struct *tty) default: case CS8: port_settings.bits = 8; break; } - dbg("%s - data bits = %d", __func__, port_settings.bits); + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); /* determine the parity */ if (cflag & PARENB) @@ -752,14 +681,14 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; - dbg("%s - parity = %c", __func__, port_settings.parity); + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; - dbg("%s - stop bits = %d", __func__, port_settings.stop); + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) @@ -767,7 +696,7 @@ static void firm_setup_port(struct tty_struct *tty) WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; - dbg("%s - hardware flow control = %s %s %s %s", __func__, + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", @@ -778,16 +707,15 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; - dbg("%s - software flow control = %c", __func__, port_settings.sflow); + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); port_settings.xon = START_CHAR(tty); port_settings.xoff = STOP_CHAR(tty); - dbg("%s - XON = %2x, XOFF = %2x", - __func__, port_settings.xon, port_settings.xoff); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ port_settings.baud = tty_get_baud_rate(tty); - dbg("%s - baud rate = %d", __func__, port_settings.baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); /* fixme: should set validated settings */ tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); @@ -918,6 +846,3 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); MODULE_FIRMWARE("whiteheat_loader.fw"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c new file mode 100644 index 000000000000..39ee7373b4ee --- /dev/null +++ b/drivers/usb/serial/zte_ev.c @@ -0,0 +1,307 @@ +/* + * ZTE_EV USB serial driver + * + * Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org> + * Copyright (C) 2012 Linux Foundation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver is based on code found in a ZTE_ENV patch that modified + * the usb-serial generic driver. Comments were left in that I think + * show the commands used to talk to the device, but I am not sure. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define MAX_SETUP_DATA_SIZE 32 + +static void debug_data(struct device *dev, const char *function, int len, + const unsigned char *data, int result) +{ + dev_dbg(dev, "result = %d\n", result); + if (result == len) + dev_dbg(dev, "%s - length = %d, data = %*ph\n", function, + len, len, data); +} + +static int zte_ev_usb_serial_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result = 0; + int len; + unsigned char *buf; + + if (port->number != 0) + return -ENODEV; + + buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0001, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 2st cmd and recieve data */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) + * 16.0 DI 00 96 00 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 3 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 + * 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0 + */ + len = 0x0007; + buf[0] = 0x80; + buf[1] = 0x25; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 4 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 5 cmd */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 + * 16.0 DI 80 25 00 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 6 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0 + * 16.0 DO 80 25 00 00 00 00 08 + */ + len = 0x0007; + buf[0] = 0x80; + buf[1] = 0x25; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + kfree(buf); + + return usb_serial_generic_open(tty, port); +} + +/* + * CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0 + * + * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0 + * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0 + * + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3) + * 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0 + * + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0 + * + * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2) + * + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0 + * 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0 + * + * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0 + * + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 + * + * 16.0 CTL 21 22 03 00 00 00 00 00 +*/ + +static void zte_ev_usb_serial_close(struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result = 0; + int len; + unsigned char *buf; + + if (port->number != 0) + return; + + buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); + if (!buf) + return; + + /* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0002, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 3st cmd and recieve data */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) + * 16.0 DI 00 08 07 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 4 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0 + */ + len = 0x0007; + buf[0] = 0x00; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 5 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 6 cmd */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 + * 16.0 DI 00 c2 01 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 7 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 + */ + len = 0x0007; + buf[0] = 0x00; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 8 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + kfree(buf); + + usb_serial_generic_close(port); +} + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ + { USB_DEVICE(0x19d2, 0xfffe) }, + { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + { USB_DEVICE(0x05C6, 0x3197) }, + { USB_DEVICE(0x05C6, 0x6000) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver zio_device = { + .driver = { + .owner = THIS_MODULE, + .name = "zte_ev", + }, + .id_table = id_table, + .num_ports = 1, + .open = zte_ev_usb_serial_open, + .close = zte_ev_usb_serial_close, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &zio_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 7691c866637b..0ae7bb64b5ea 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -213,17 +213,3 @@ config USB_UAS say 'Y' or 'M' here and the kernel will use the right driver. If you compile this driver as a module, it will be named uas. - -config USB_LIBUSUAL - bool "The shared table of common (or usual) storage devices" - depends on USB - help - This module contains a table of common (or usual) devices - for usb-storage and ub drivers, and allows to switch binding - of these devices without rebuilding modules. - - Typical syntax of /etc/modprobe.d/*conf is: - - options libusual bias="ub" - - If unsure, say N. diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 82e6416a2d47..4cd55481b309 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -12,16 +12,9 @@ obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-y := scsiglue.o protocol.o transport.o usb.o usb-storage-y += initializers.o sierra_ms.o option_ms.o - +usb-storage-y += usual-tables.o usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -ifeq ($(CONFIG_USB_LIBUSUAL),) - usb-storage-y += usual-tables.o -else - obj-$(CONFIG_USB) += usb-libusual.o - usb-libusual-y := libusual.o usual-tables.o -endif - obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index bab8c8fe8290..be5564cc8e01 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -137,7 +137,7 @@ static int init_alauda(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id alauda_usb_ids[] = { # include "unusual_alauda.h" diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 5fe451d16e68..070b5c0ebbf9 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -41,7 +41,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id cypress_usb_ids[] = { # include "unusual_cypress.h" diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 35e9c51e6696..494fee5af41d 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -86,7 +86,7 @@ static int datafab_determine_lun(struct us_data *us, vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id datafab_usb_ids[] = { # include "unusual_datafab.h" diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index b28f2ad127d4..118b134a1dad 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -29,9 +29,21 @@ #include "protocol.h" #include "debug.h" +#define SD_INIT1_FIRMWARE "ene-ub6250/sd_init1.bin" +#define SD_INIT2_FIRMWARE "ene-ub6250/sd_init2.bin" +#define SD_RW_FIRMWARE "ene-ub6250/sd_rdwr.bin" +#define MS_INIT_FIRMWARE "ene-ub6250/ms_init.bin" +#define MSP_RW_FIRMWARE "ene-ub6250/msp_rdwr.bin" +#define MS_RW_FIRMWARE "ene-ub6250/ms_rdwr.bin" + MODULE_DESCRIPTION("Driver for ENE UB6250 reader"); MODULE_LICENSE("GPL"); - +MODULE_FIRMWARE(SD_INIT1_FIRMWARE); +MODULE_FIRMWARE(SD_INIT2_FIRMWARE); +MODULE_FIRMWARE(SD_RW_FIRMWARE); +MODULE_FIRMWARE(MS_INIT_FIRMWARE); +MODULE_FIRMWARE(MSP_RW_FIRMWARE); +MODULE_FIRMWARE(MS_RW_FIRMWARE); /* * The table of devices @@ -40,7 +52,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags)} static struct usb_device_id ene_ub6250_usb_ids[] = { # include "unusual_ene_ub6250.h" @@ -1883,28 +1895,28 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) /* For SD */ case SD_INIT1_PATTERN: US_DEBUGP("SD_INIT1_PATTERN\n"); - fw_name = "ene-ub6250/sd_init1.bin"; + fw_name = SD_INIT1_FIRMWARE; break; case SD_INIT2_PATTERN: US_DEBUGP("SD_INIT2_PATTERN\n"); - fw_name = "ene-ub6250/sd_init2.bin"; + fw_name = SD_INIT2_FIRMWARE; break; case SD_RW_PATTERN: - US_DEBUGP("SD_RDWR_PATTERN\n"); - fw_name = "ene-ub6250/sd_rdwr.bin"; + US_DEBUGP("SD_RW_PATTERN\n"); + fw_name = SD_RW_FIRMWARE; break; /* For MS */ case MS_INIT_PATTERN: US_DEBUGP("MS_INIT_PATTERN\n"); - fw_name = "ene-ub6250/ms_init.bin"; + fw_name = MS_INIT_FIRMWARE; break; case MSP_RW_PATTERN: US_DEBUGP("MSP_RW_PATTERN\n"); - fw_name = "ene-ub6250/msp_rdwr.bin"; + fw_name = MSP_RW_FIRMWARE; break; case MS_RW_PATTERN: US_DEBUGP("MS_RW_PATTERN\n"); - fw_name = "ene-ub6250/ms_rdwr.bin"; + fw_name = MS_RW_FIRMWARE; break; default: US_DEBUGP("----------- Unknown PATTERN ----------\n"); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 042cf9ef3153..e6df087dca9d 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -117,7 +117,7 @@ static int init_freecom(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id freecom_usb_ids[] = { # include "unusual_freecom.h" diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 31fa24e7e68a..ecea47877364 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -74,7 +74,7 @@ static int isd200_Initialization(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id isd200_usb_ids[] = { # include "unusual_isd200.h" @@ -83,7 +83,6 @@ static struct usb_device_id isd200_usb_ids[] = { MODULE_DEVICE_TABLE(usb, isd200_usb_ids); #undef UNUSUAL_DEV -#undef USUAL_DEV /* * The flags table @@ -105,8 +104,6 @@ static struct us_unusual_dev isd200_unusual_dev_list[] = { }; #undef UNUSUAL_DEV -#undef USUAL_DEV - /* Timeout defines (in Seconds) */ diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index e3b97383186a..ddc78780b1ad 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -69,7 +69,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id jumpshot_usb_ids[] = { # include "unusual_jumpshot.h" diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index a8708eae9788..f085ffb606c8 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -57,7 +57,7 @@ static int rio_karma_init(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id karma_usb_ids[] = { # include "unusual_karma.h" diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c deleted file mode 100644 index fe3ffe1459b2..000000000000 --- a/drivers/usb/storage/libusual.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * libusual - * - * The libusual contains the table of devices common for ub and usb-storage. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb_usual.h> -#include <linux/vmalloc.h> -#include <linux/kthread.h> -#include <linux/mutex.h> - -/* - */ -#define USU_MOD_FL_THREAD 1 /* Thread is running */ -#define USU_MOD_FL_PRESENT 2 /* The module is loaded */ - -struct mod_status { - unsigned long fls; -}; - -static struct mod_status stat[3]; -static DEFINE_SPINLOCK(usu_lock); - -/* - */ -#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR -static atomic_t usu_bias = ATOMIC_INIT(USB_US_DEFAULT_BIAS); - -#define BIAS_NAME_SIZE (sizeof("usb-storage")) -static const char *bias_names[3] = { "none", "usb-storage", "ub" }; - -static DEFINE_MUTEX(usu_probe_mutex); -static DECLARE_COMPLETION(usu_end_notify); -static atomic_t total_threads = ATOMIC_INIT(0); - -static int usu_probe_thread(void *arg); - -/* - * @type: the module type as an integer - */ -void usb_usual_set_present(int type) -{ - struct mod_status *st; - unsigned long flags; - - if (type <= 0 || type >= 3) - return; - st = &stat[type]; - spin_lock_irqsave(&usu_lock, flags); - st->fls |= USU_MOD_FL_PRESENT; - spin_unlock_irqrestore(&usu_lock, flags); -} -EXPORT_SYMBOL_GPL(usb_usual_set_present); - -void usb_usual_clear_present(int type) -{ - struct mod_status *st; - unsigned long flags; - - if (type <= 0 || type >= 3) - return; - st = &stat[type]; - spin_lock_irqsave(&usu_lock, flags); - st->fls &= ~USU_MOD_FL_PRESENT; - spin_unlock_irqrestore(&usu_lock, flags); -} -EXPORT_SYMBOL_GPL(usb_usual_clear_present); - -/* - * Match the calling driver type against the table. - * Returns: 0 if the device matches. - */ -int usb_usual_check_type(const struct usb_device_id *id, int caller_type) -{ - int id_type = USB_US_TYPE(id->driver_info); - - if (caller_type <= 0 || caller_type >= 3) - return -EINVAL; - - /* Drivers grab fixed assignment devices */ - if (id_type == caller_type) - return 0; - /* Drivers grab devices biased to them */ - if (id_type == USB_US_TYPE_NONE && caller_type == atomic_read(&usu_bias)) - return 0; - return -ENODEV; -} -EXPORT_SYMBOL_GPL(usb_usual_check_type); - -/* - */ -static int usu_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int rc; - unsigned long type; - struct task_struct* task; - unsigned long flags; - - type = USB_US_TYPE(id->driver_info); - if (type == 0) - type = atomic_read(&usu_bias); - - spin_lock_irqsave(&usu_lock, flags); - if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) { - spin_unlock_irqrestore(&usu_lock, flags); - return -ENXIO; - } - stat[type].fls |= USU_MOD_FL_THREAD; - spin_unlock_irqrestore(&usu_lock, flags); - - task = kthread_run(usu_probe_thread, (void*)type, "libusual_%ld", type); - if (IS_ERR(task)) { - rc = PTR_ERR(task); - printk(KERN_WARNING "libusual: " - "Unable to start the thread for %s: %d\n", - bias_names[type], rc); - spin_lock_irqsave(&usu_lock, flags); - stat[type].fls &= ~USU_MOD_FL_THREAD; - spin_unlock_irqrestore(&usu_lock, flags); - return rc; /* Not being -ENXIO causes a message printed */ - } - atomic_inc(&total_threads); - - return -ENXIO; -} - -static void usu_disconnect(struct usb_interface *intf) -{ - ; /* We should not be here. */ -} - -static struct usb_driver usu_driver = { - .name = "libusual", - .probe = usu_probe, - .disconnect = usu_disconnect, - .id_table = usb_storage_usb_ids, -}; - -/* - * A whole new thread for a purpose of request_module seems quite stupid. - * The request_module forks once inside again. However, if we attempt - * to load a storage module from our own modprobe thread, that module - * references our symbols, which cannot be resolved until our module is - * initialized. I wish there was a way to wait for the end of initialization. - * The module notifier reports MODULE_STATE_COMING only. - * So, we wait until module->init ends as the next best thing. - */ -static int usu_probe_thread(void *arg) -{ - int type = (unsigned long) arg; - struct mod_status *st = &stat[type]; - int rc; - unsigned long flags; - - mutex_lock(&usu_probe_mutex); - rc = request_module(bias_names[type]); - spin_lock_irqsave(&usu_lock, flags); - if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) { - /* - * This should not happen, but let us keep tabs on it. - */ - printk(KERN_NOTICE "libusual: " - "modprobe for %s succeeded, but module is not present\n", - bias_names[type]); - } - st->fls &= ~USU_MOD_FL_THREAD; - spin_unlock_irqrestore(&usu_lock, flags); - mutex_unlock(&usu_probe_mutex); - - complete_and_exit(&usu_end_notify, 0); -} - -/* - */ -static int __init usb_usual_init(void) -{ - int rc; - - mutex_lock(&usu_probe_mutex); - rc = usb_register(&usu_driver); - mutex_unlock(&usu_probe_mutex); - return rc; -} - -static void __exit usb_usual_exit(void) -{ - /* - * We do not check for any drivers present, because - * they keep us pinned with symbol references. - */ - - usb_deregister(&usu_driver); - - while (atomic_read(&total_threads) > 0) { - wait_for_completion(&usu_end_notify); - atomic_dec(&total_threads); - } -} - -/* - * Validate and accept the bias parameter. - */ -static int usu_set_bias(const char *bias_s, struct kernel_param *kp) -{ - int i; - int len; - int bias_n = 0; - - len = strlen(bias_s); - if (len == 0) - return -EDOM; - if (bias_s[len-1] == '\n') - --len; - - for (i = 1; i < 3; i++) { - if (strncmp(bias_s, bias_names[i], len) == 0) { - bias_n = i; - break; - } - } - if (bias_n == 0) - return -EINVAL; - - atomic_set(&usu_bias, bias_n); - return 0; -} - -static int usu_get_bias(char *buffer, struct kernel_param *kp) -{ - return strlen(strcpy(buffer, bias_names[atomic_read(&usu_bias)])); -} - -module_init(usb_usual_init); -module_exit(usb_usual_exit); - -module_param_call(bias, usu_set_bias, usu_get_bias, NULL, S_IRUGO|S_IWUSR); -__MODULE_PARM_TYPE(bias, "string"); -MODULE_PARM_DESC(bias, "Bias to usb-storage or ub"); - -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 886567a3806d..cb79de61f4c8 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -67,7 +67,7 @@ struct usb_onetouch { vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id onetouch_usb_ids[] = { # include "unusual_onetouch.h" diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 63cf2822e299..d36446dd7ae8 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -172,7 +172,7 @@ static int init_realtek_cr(struct us_data *us); initFunction, flags) \ {\ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24)\ + .driver_info = (flags) \ } static const struct usb_device_id realtek_cr_ids[] = { diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 3252a62b31bc..7bd54e0d5120 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -69,7 +69,7 @@ static int usb_stor_sddr09_init(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id sddr09_usb_ids[] = { # include "unusual_sddr09.h" diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index c144078065a7..d278c5a99b7a 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -46,7 +46,7 @@ MODULE_LICENSE("GPL"); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id sddr55_usb_ids[] = { # include "unusual_sddr55.h" diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index fa1ceebc465c..daf2fc58ae02 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -168,7 +168,7 @@ static int init_usbat_flash(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } static struct usb_device_id usbat_usb_ids[] = { # include "unusual_usbat.h" diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 37539c89e3ba..17e36952bced 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -130,14 +130,13 @@ int sierra_ms_init(struct us_data *us) struct swoc_info *swocInfo; struct usb_device *udev; struct Scsi_Host *sh; - struct scsi_device *sd; retries = 3; result = 0; udev = us->pusb_dev; sh = us_to_host(us); - sd = scsi_get_host_dev(sh); + scsi_get_host_dev(sh); US_DEBUGP("SWIMS: sierra_ms_init called\n"); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c70109e5d60b..c0543c83923e 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1331,7 +1331,7 @@ int usb_stor_port_reset(struct us_data *us) int result; /*for these devices we must use the class specific method */ - if (us->pusb_dev->quirks & USB_QUIRK_RESET_MORPHS) + if (us->pusb_dev->quirks & USB_QUIRK_RESET) return -EPERM; result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 638cd64f9610..98b98eef7527 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -41,6 +41,7 @@ struct sense_iu_old { struct uas_dev_info { struct usb_interface *intf; struct usb_device *udev; + struct usb_anchor cmd_urbs; struct usb_anchor sense_urbs; struct usb_anchor data_urbs; int qdepth, resetting; @@ -49,6 +50,7 @@ struct uas_dev_info { unsigned use_streams:1; unsigned uas_sense_old:1; struct scsi_cmnd *cmnd; + spinlock_t lock; }; enum { @@ -63,13 +65,13 @@ enum { DATA_IN_URB_INFLIGHT = (1 << 9), DATA_OUT_URB_INFLIGHT = (1 << 10), COMMAND_COMPLETED = (1 << 11), + COMMAND_ABORTED = (1 << 12), }; /* Overrides scsi_pointer */ struct uas_cmd_info { unsigned int state; unsigned int stream; - unsigned int aborted; struct urb *cmd_urb; struct urb *data_in_urb; struct urb *data_out_urb; @@ -90,6 +92,7 @@ static void uas_do_work(struct work_struct *work) struct uas_cmd_info *cmdinfo; struct uas_cmd_info *temp; struct list_head list; + unsigned long flags; int err; spin_lock_irq(&uas_work_lock); @@ -100,7 +103,10 @@ static void uas_do_work(struct work_struct *work) struct scsi_pointer *scp = (void *)cmdinfo; struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); - err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + spin_lock_irqsave(&devinfo->lock, flags); + err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); + spin_unlock_irqrestore(&devinfo->lock, flags); if (err) { list_del(&cmdinfo->list); spin_lock_irq(&uas_work_lock); @@ -162,7 +168,7 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) struct uas_cmd_info *ci = (void *)&cmnd->SCp; scmd_printk(KERN_INFO, cmnd, "%s %p tag %d, inflight:" - "%s%s%s%s%s%s%s%s%s%s%s\n", + "%s%s%s%s%s%s%s%s%s%s%s%s\n", caller, cmnd, cmnd->request->tag, (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", @@ -174,13 +180,16 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", - (ci->state & COMMAND_COMPLETED) ? " done" : ""); + (ci->state & COMMAND_COMPLETED) ? " done" : "", + (ci->state & COMMAND_ABORTED) ? " abort" : ""); } static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) { struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + WARN_ON(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT | DATA_OUT_URB_INFLIGHT)) @@ -189,6 +198,10 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) cmdinfo->state |= COMMAND_COMPLETED; usb_free_urb(cmdinfo->data_in_urb); usb_free_urb(cmdinfo->data_out_urb); + if (cmdinfo->state & COMMAND_ABORTED) { + scmd_printk(KERN_INFO, cmnd, "abort completed\n"); + cmnd->result = DID_ABORT << 16; + } cmnd->scsi_done(cmnd); return 0; } @@ -216,6 +229,7 @@ static void uas_stat_cmplt(struct urb *urb) struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; struct scsi_cmnd *cmnd; struct uas_cmd_info *cmdinfo; + unsigned long flags; u16 tag; if (urb->status) { @@ -229,20 +243,24 @@ static void uas_stat_cmplt(struct urb *urb) return; } + spin_lock_irqsave(&devinfo->lock, flags); tag = be16_to_cpup(&iu->tag) - 1; if (tag == 0) cmnd = devinfo->cmnd; else cmnd = scsi_host_find_tag(shost, tag - 1); + if (!cmnd) { - if (iu->iu_id != IU_ID_RESPONSE) { - usb_free_urb(urb); - return; + if (iu->iu_id == IU_ID_RESPONSE) { + /* store results for uas_eh_task_mgmt() */ + memcpy(&devinfo->response, iu, sizeof(devinfo->response)); } - } else { - cmdinfo = (void *)&cmnd->SCp; + usb_free_urb(urb); + spin_unlock_irqrestore(&devinfo->lock, flags); + return; } + cmdinfo = (void *)&cmnd->SCp; switch (iu->iu_id) { case IU_ID_STATUS: if (devinfo->cmnd == cmnd) @@ -256,10 +274,16 @@ static void uas_stat_cmplt(struct urb *urb) uas_sense(urb, cmnd); if (cmnd->result != 0) { /* cancel data transfers on error */ - if (cmdinfo->state & DATA_IN_URB_INFLIGHT) + if (cmdinfo->state & DATA_IN_URB_INFLIGHT) { + spin_unlock_irqrestore(&devinfo->lock, flags); usb_unlink_urb(cmdinfo->data_in_urb); - if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) + spin_lock_irqsave(&devinfo->lock, flags); + } + if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) { + spin_unlock_irqrestore(&devinfo->lock, flags); usb_unlink_urb(cmdinfo->data_out_urb); + spin_lock_irqsave(&devinfo->lock, flags); + } } cmdinfo->state &= ~COMMAND_INFLIGHT; uas_try_complete(cmnd, __func__); @@ -270,23 +294,23 @@ static void uas_stat_cmplt(struct urb *urb) case IU_ID_WRITE_READY: uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); break; - case IU_ID_RESPONSE: - /* store results for uas_eh_task_mgmt() */ - memcpy(&devinfo->response, iu, sizeof(devinfo->response)); - break; default: scmd_printk(KERN_ERR, cmnd, "Bogus IU (%d) received on status pipe\n", iu->iu_id); } usb_free_urb(urb); + spin_unlock_irqrestore(&devinfo->lock, flags); } static void uas_data_cmplt(struct urb *urb) { struct scsi_cmnd *cmnd = urb->context; struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; struct scsi_data_buffer *sdb = NULL; + unsigned long flags; + spin_lock_irqsave(&devinfo->lock, flags); if (cmdinfo->data_in_urb == urb) { sdb = scsi_in(cmnd); cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; @@ -301,10 +325,8 @@ static void uas_data_cmplt(struct urb *urb) } else { sdb->resid = sdb->length - urb->actual_length; } - if (cmdinfo->aborted) { - return; - } uas_try_complete(cmnd, __func__); + spin_unlock_irqrestore(&devinfo->lock, flags); } static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, @@ -431,6 +453,7 @@ static int uas_submit_task_urb(struct scsi_cmnd *cmnd, gfp_t gfp, err = usb_submit_urb(urb, gfp); if (err) goto err; + usb_anchor_urb(urb, &devinfo->cmd_urbs); return 0; @@ -470,6 +493,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; int err; + WARN_ON(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & SUBMIT_STATUS_URB) { err = uas_submit_sense_urb(cmnd->device->host, gfp, cmdinfo->stream); @@ -521,18 +545,22 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_CMD_URB) { cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd, - cmdinfo->stream); + cmdinfo->stream); if (!cmdinfo->cmd_urb) return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~ALLOC_CMD_URB; } if (cmdinfo->state & SUBMIT_CMD_URB) { + usb_get_urb(cmdinfo->cmd_urb); if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) { scmd_printk(KERN_INFO, cmnd, "cmd urb submission failure\n"); return SCSI_MLQUEUE_DEVICE_BUSY; } + usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); + usb_put_urb(cmdinfo->cmd_urb); + cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; cmdinfo->state |= COMMAND_INFLIGHT; } @@ -546,12 +574,16 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, struct scsi_device *sdev = cmnd->device; struct uas_dev_info *devinfo = sdev->hostdata; struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + unsigned long flags; int err; BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); - if (devinfo->cmnd) + spin_lock_irqsave(&devinfo->lock, flags); + if (devinfo->cmnd) { + spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; + } if (blk_rq_tagged(cmnd->request)) { cmdinfo->stream = cmnd->request->tag + 2; @@ -564,7 +596,6 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; - cmdinfo->aborted = 0; switch (cmnd->sc_data_direction) { case DMA_FROM_DEVICE: @@ -587,6 +618,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, if (err) { /* If we did nothing, give up now */ if (cmdinfo->state & SUBMIT_STATUS_URB) { + spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; } spin_lock(&uas_work_lock); @@ -595,6 +627,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, schedule_work(&uas_work); } + spin_unlock_irqrestore(&devinfo->lock, flags); return 0; } @@ -605,22 +638,28 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd, { struct Scsi_Host *shost = cmnd->device->host; struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; - u16 tag = 9999; /* FIXME */ + u16 tag = devinfo->qdepth - 1; + unsigned long flags; + spin_lock_irqsave(&devinfo->lock, flags); memset(&devinfo->response, 0, sizeof(devinfo->response)); - if (uas_submit_sense_urb(shost, GFP_NOIO, tag)) { + if (uas_submit_sense_urb(shost, GFP_ATOMIC, tag)) { shost_printk(KERN_INFO, shost, "%s: %s: submit sense urb failed\n", __func__, fname); + spin_unlock_irqrestore(&devinfo->lock, flags); return FAILED; } - if (uas_submit_task_urb(cmnd, GFP_NOIO, function, tag)) { + if (uas_submit_task_urb(cmnd, GFP_ATOMIC, function, tag)) { shost_printk(KERN_INFO, shost, "%s: %s: submit task mgmt urb failed\n", __func__, fname); + spin_unlock_irqrestore(&devinfo->lock, flags); return FAILED; } - if (0 == usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000)) { + spin_unlock_irqrestore(&devinfo->lock, flags); + + if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000) == 0) { shost_printk(KERN_INFO, shost, "%s: %s timed out\n", __func__, fname); return FAILED; @@ -643,15 +682,15 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd, static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) { struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; + unsigned long flags; int ret; uas_log_cmd_state(cmnd, __func__); - cmdinfo->aborted = 1; + spin_lock_irqsave(&devinfo->lock, flags); + cmdinfo->state |= COMMAND_ABORTED; + spin_unlock_irqrestore(&devinfo->lock, flags); ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK); - if (cmdinfo->state & DATA_IN_URB_INFLIGHT) - usb_kill_urb(cmdinfo->data_in_urb); - if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) - usb_kill_urb(cmdinfo->data_out_urb); return ret; } @@ -670,6 +709,7 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) int err; devinfo->resetting = 1; + usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); err = usb_reset_device(udev); @@ -694,7 +734,7 @@ static int uas_slave_configure(struct scsi_device *sdev) { struct uas_dev_info *devinfo = sdev->hostdata; scsi_set_tag_type(sdev, MSG_ORDERED_TAG); - scsi_activate_tcq(sdev, devinfo->qdepth - 2); + scsi_activate_tcq(sdev, devinfo->qdepth - 3); return 0; } @@ -868,11 +908,13 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) devinfo->intf = intf; devinfo->udev = udev; devinfo->resetting = 0; + init_usb_anchor(&devinfo->cmd_urbs); init_usb_anchor(&devinfo->sense_urbs); init_usb_anchor(&devinfo->data_urbs); + spin_lock_init(&devinfo->lock); uas_configure_endpoints(devinfo); - result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); + result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 3); if (result) goto free; @@ -913,6 +955,7 @@ static void uas_disconnect(struct usb_interface *intf) struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; scsi_remove_host(shost); + usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); uas_free_streams(devinfo); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 62a31bea0634..779cd954abcb 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2038,25 +2038,25 @@ UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), /* Control/Bulk transport for all SubClass values */ -USUAL_DEV(USB_SC_RBC, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8020, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_QIC, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_UFI, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8070, USB_PR_CB, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_SCSI, USB_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(USB_SC_RBC, USB_PR_CB), +USUAL_DEV(USB_SC_8020, USB_PR_CB), +USUAL_DEV(USB_SC_QIC, USB_PR_CB), +USUAL_DEV(USB_SC_UFI, USB_PR_CB), +USUAL_DEV(USB_SC_8070, USB_PR_CB), +USUAL_DEV(USB_SC_SCSI, USB_PR_CB), /* Control/Bulk/Interrupt transport for all SubClass values */ -USUAL_DEV(USB_SC_RBC, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8020, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_QIC, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_UFI, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8070, USB_PR_CBI, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_SCSI, USB_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(USB_SC_RBC, USB_PR_CBI), +USUAL_DEV(USB_SC_8020, USB_PR_CBI), +USUAL_DEV(USB_SC_QIC, USB_PR_CBI), +USUAL_DEV(USB_SC_UFI, USB_PR_CBI), +USUAL_DEV(USB_SC_8070, USB_PR_CBI), +USUAL_DEV(USB_SC_SCSI, USB_PR_CBI), /* Bulk-only transport for all SubClass values */ -USUAL_DEV(USB_SC_RBC, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8020, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_QIC, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_UFI, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_8070, USB_PR_BULK, USB_US_TYPE_STOR), -USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0), +USUAL_DEV(USB_SC_RBC, USB_PR_BULK), +USUAL_DEV(USB_SC_8020, USB_PR_BULK), +USUAL_DEV(USB_SC_QIC, USB_PR_BULK), +USUAL_DEV(USB_SC_UFI, USB_PR_BULK), +USUAL_DEV(USB_SC_8070, USB_PR_BULK), +USUAL_DEV(USB_SC_SCSI, USB_PR_BULK), diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index d012fe4329e7..12aa72630aed 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -114,7 +114,7 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); #define COMPLIANT_DEV UNUSUAL_DEV -#define USUAL_DEV(use_protocol, use_transport, use_type) \ +#define USUAL_DEV(use_protocol, use_transport) \ { \ .useProtocol = use_protocol, \ .useTransport = use_transport, \ @@ -126,7 +126,7 @@ static struct us_unusual_dev us_unusual_dev_list[] = { }; static struct us_unusual_dev for_dynamic_ids = - USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0); + USUAL_DEV(USB_SC_SCSI, USB_PR_BULK); #undef UNUSUAL_DEV #undef COMPLIANT_DEV @@ -564,7 +564,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id, us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ? idesc->bInterfaceProtocol : unusual_dev->useTransport; - us->fflags = USB_US_ORIG_FLAGS(id->driver_info); + us->fflags = id->driver_info; adjust_quirks(us); if (us->fflags & US_FL_IGNORE_DEVICE) { @@ -1041,13 +1041,10 @@ static int storage_probe(struct usb_interface *intf, int size; /* - * If libusual is configured, let it decide whether a standard - * device should be handled by usb-storage or by ub. * If the device isn't standard (is handled by a subdriver * module) then don't accept it. */ - if (usb_usual_check_type(id, USB_US_TYPE_STOR) || - usb_usual_ignore_device(intf)) + if (usb_usual_ignore_device(intf)) return -ENXIO; /* @@ -1105,10 +1102,8 @@ static int __init usb_stor_init(void) /* register the driver, return usb_register return code if error */ retval = usb_register(&usb_storage_driver); - if (retval == 0) { + if (retval == 0) pr_info("USB Mass Storage support registered.\n"); - usb_usual_set_present(USB_US_TYPE_STOR); - } return retval; } @@ -1122,8 +1117,6 @@ static void __exit usb_stor_exit(void) */ US_DEBUGP("-- calling usb_deregister()\n"); usb_deregister(&usb_storage_driver) ; - - usb_usual_clear_present(USB_US_TYPE_STOR); } module_init(usb_stor_init); diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index b96927914f89..b78a526910fb 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -34,31 +34,23 @@ vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } - -#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName, useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ .driver_info = (flags) } -#define USUAL_DEV(useProto, useTrans, useType) \ -{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ - .driver_info = ((useType)<<24) } +#define COMPLIANT_DEV UNUSUAL_DEV + +#define USUAL_DEV(useProto, useTrans) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) } struct usb_device_id usb_storage_usb_ids[] = { # include "unusual_devs.h" { } /* Terminating entry */ }; -EXPORT_SYMBOL_GPL(usb_storage_usb_ids); - MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV - /* * The table of devices to ignore */ @@ -95,7 +87,6 @@ static struct ignore_entry ignore_ids[] = { #undef UNUSUAL_DEV - /* Return an error if a device is in the ignore_ids list */ int usb_usual_ignore_device(struct usb_interface *intf) { @@ -115,4 +106,3 @@ int usb_usual_ignore_device(struct usb_interface *intf) } return 0; } -EXPORT_SYMBOL_GPL(usb_usual_ignore_device); diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index f29fdd7f6d75..8bf19760d447 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -2,8 +2,7 @@ # Wireless USB Core configuration # config USB_WUSB - tristate "Enable Wireless USB extensions (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Enable Wireless USB extensions" depends on USB depends on PCI depends on UWB diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index fa810a83e830..dd88441c8f78 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -202,7 +202,7 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, { int result, bytes, secd_size; struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd; + struct usb_security_descriptor *secd, *new_secd; const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; const void *itr, *top; char buf[64]; @@ -221,11 +221,12 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, goto out; } secd_size = le16_to_cpu(secd->wTotalLength); - secd = krealloc(secd, secd_size, GFP_KERNEL); - if (secd == NULL) { + new_secd = krealloc(secd, secd_size, GFP_KERNEL); + if (new_secd == NULL) { dev_err(dev, "Can't allocate space for security descriptors\n"); goto out; } + secd = new_secd; result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, 0, secd, secd_size); if (result < secd_size) { diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index 9e4a92461688..a09b65ebd9bb 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -46,8 +46,10 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd); wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); - if (wa->xfer_result == NULL) + if (wa->xfer_result == NULL) { + result = -ENOMEM; goto error_xfer_result_alloc; + } result = wa_nep_create(wa, iface); if (result < 0) { dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n", |
