diff options
Diffstat (limited to 'drivers/usb/wusbcore')
| -rw-r--r-- | drivers/usb/wusbcore/cbaf.c | 7 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/devconnect.c | 2 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wa-hc.c | 18 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wa-hc.h | 42 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wa-rpipe.c | 22 | ||||
| -rw-r--r-- | drivers/usb/wusbcore/wa-xfer.c | 1261 |
6 files changed, 1043 insertions, 309 deletions
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c index 7f78f300f8fb..f06ed82e63d1 100644 --- a/drivers/usb/wusbcore/cbaf.c +++ b/drivers/usb/wusbcore/cbaf.c @@ -208,9 +208,9 @@ static int cbaf_check(struct cbaf *cbaf) ar_name = "ASSOCIATE"; ar_assoc = 1; break; - }; + } break; - }; + } dev_dbg(dev, "Association request #%02u: 0x%04x/%04x " "(%zu bytes): %s\n", @@ -623,6 +623,8 @@ static int cbaf_probe(struct usb_interface *iface, error_create_group: error_check: + usb_put_intf(iface); + usb_put_dev(cbaf->usb_dev); kfree(cbaf->buffer); error_kmalloc_buffer: kfree(cbaf); @@ -637,6 +639,7 @@ static void cbaf_disconnect(struct usb_interface *iface) sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group); usb_set_intfdata(iface, NULL); usb_put_intf(iface); + usb_put_dev(cbaf->usb_dev); kfree(cbaf->buffer); /* paranoia: clean up crypto keys */ kzfree(cbaf); diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 33a12788f9ca..e538b72c4e3a 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -973,7 +973,7 @@ int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, default: WARN_ON(1); result = NOTIFY_BAD; - }; + } return result; } diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index a09b65ebd9bb..368360f9a93a 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -33,7 +33,8 @@ * wa->usb_dev and wa->usb_iface initialized and refcounted, * wa->wa_descr initialized. */ -int wa_create(struct wahc *wa, struct usb_interface *iface) +int wa_create(struct wahc *wa, struct usb_interface *iface, + kernel_ulong_t quirks) { int result; struct device *dev = &iface->dev; @@ -41,14 +42,15 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) result = wa_rpipes_create(wa); if (result < 0) goto error_rpipes_create; + wa->quirks = quirks; /* Fill up Data Transfer EP pointers */ wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; - wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd); - wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); - if (wa->xfer_result == NULL) { + wa->dti_buf_size = usb_endpoint_maxp(wa->dti_epd); + wa->dti_buf = kmalloc(wa->dti_buf_size, GFP_KERNEL); + if (wa->dti_buf == NULL) { result = -ENOMEM; - goto error_xfer_result_alloc; + goto error_dti_buf_alloc; } result = wa_nep_create(wa, iface); if (result < 0) { @@ -59,8 +61,8 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) return 0; error_nep_create: - kfree(wa->xfer_result); -error_xfer_result_alloc: + kfree(wa->dti_buf); +error_dti_buf_alloc: wa_rpipes_destroy(wa); error_rpipes_create: return result; @@ -76,7 +78,7 @@ void __wa_destroy(struct wahc *wa) usb_kill_urb(wa->buf_in_urb); usb_put_urb(wa->buf_in_urb); } - kfree(wa->xfer_result); + kfree(wa->dti_buf); wa_nep_destroy(wa); wa_rpipes_destroy(wa); } diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index cf250c21e946..e614f02f0cf2 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -117,11 +117,25 @@ struct wa_rpipe { struct wahc *wa; spinlock_t seg_lock; struct list_head seg_list; + struct list_head list_node; atomic_t segs_available; u8 buffer[1]; /* For reads/writes on USB */ }; +enum wa_dti_state { + WA_DTI_TRANSFER_RESULT_PENDING, + WA_DTI_ISOC_PACKET_STATUS_PENDING +}; + +enum wa_quirks { + /* + * The Alereon HWA expects the data frames in isochronous transfer + * requests to be concatenated and not sent as separate packets. + */ + WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01, +}; + /** * Instance of a HWA Host Controller * @@ -178,14 +192,26 @@ struct wahc { u16 rpipes; unsigned long *rpipe_bm; /* rpipe usage bitmap */ - spinlock_t rpipe_bm_lock; /* protect rpipe_bm */ + struct list_head rpipe_delayed_list; /* delayed RPIPES. */ + spinlock_t rpipe_lock; /* protect rpipe_bm and delayed list */ struct mutex rpipe_mutex; /* assigning resources to endpoints */ + /* + * dti_state is used to track the state of the dti_urb. When dti_state + * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and + * dti_isoc_xfer_seg identify which xfer the incoming isoc packet status + * refers to. + */ + enum wa_dti_state dti_state; + u32 dti_isoc_xfer_in_progress; + u8 dti_isoc_xfer_seg; struct urb *dti_urb; /* URB for reading xfer results */ struct urb *buf_in_urb; /* URB for reading data in */ struct edc dti_edc; /* DTI error density counter */ - struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */ - size_t xfer_result_size; + void *dti_buf; + size_t dti_buf_size; + + unsigned long dto_in_use; /* protect dto endoint serialization. */ s32 status; /* For reading status */ @@ -200,10 +226,13 @@ struct wahc { struct work_struct xfer_enqueue_work; struct work_struct xfer_error_work; atomic_t xfer_id_count; + + kernel_ulong_t quirks; }; -extern int wa_create(struct wahc *wa, struct usb_interface *iface); +extern int wa_create(struct wahc *wa, struct usb_interface *iface, + kernel_ulong_t); extern void __wa_destroy(struct wahc *wa); void wa_reset_all(struct wahc *wa); @@ -239,7 +268,8 @@ static inline void wa_nep_disarm(struct wahc *wa) /* RPipes */ static inline void wa_rpipe_init(struct wahc *wa) { - spin_lock_init(&wa->rpipe_bm_lock); + INIT_LIST_HEAD(&wa->rpipe_delayed_list); + spin_lock_init(&wa->rpipe_lock); mutex_init(&wa->rpipe_mutex); } @@ -247,6 +277,7 @@ static inline void wa_init(struct wahc *wa) { edc_init(&wa->nep_edc); atomic_set(&wa->notifs_queued, 0); + wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; wa_rpipe_init(wa); edc_init(&wa->dti_edc); INIT_LIST_HEAD(&wa->xfer_list); @@ -255,6 +286,7 @@ static inline void wa_init(struct wahc *wa) spin_lock_init(&wa->xfer_list_lock); INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run); INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run); + wa->dto_in_use = 0; atomic_set(&wa->xfer_id_count, 1); } diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c index fd4f1ce6256a..b48e74cc54d7 100644 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -143,17 +143,18 @@ static void rpipe_init(struct wa_rpipe *rpipe) kref_init(&rpipe->refcnt); spin_lock_init(&rpipe->seg_lock); INIT_LIST_HEAD(&rpipe->seg_list); + INIT_LIST_HEAD(&rpipe->list_node); } static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx) { unsigned long flags; - spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + spin_lock_irqsave(&wa->rpipe_lock, flags); rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx); if (rpipe_idx < wa->rpipes) set_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); + spin_unlock_irqrestore(&wa->rpipe_lock, flags); return rpipe_idx; } @@ -162,9 +163,9 @@ static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx) { unsigned long flags; - spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + spin_lock_irqsave(&wa->rpipe_lock, flags); clear_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); + spin_unlock_irqrestore(&wa->rpipe_lock, flags); } void rpipe_destroy(struct kref *_rpipe) @@ -333,7 +334,10 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, /* FIXME: compute so seg_size > ep->maxpktsize */ rpipe->descr.wBlocks = cpu_to_le16(16); /* given */ /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */ - rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize); + if (usb_endpoint_xfer_isoc(&ep->desc)) + rpipe->descr.wMaxPacketSize = epcd->wOverTheAirPacketSize; + else + rpipe->descr.wMaxPacketSize = ep->desc.wMaxPacketSize; rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int, epcd->bMaxBurst, 16U), 1U); @@ -361,8 +365,10 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, epcd->bMaxSequence, 32U), 2U); rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1; rpipe->descr.bInterval = ep->desc.bInterval; - /* FIXME: bOverTheAirInterval */ - rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ + if (usb_endpoint_xfer_isoc(&ep->desc)) + rpipe->descr.bOverTheAirInterval = epcd->bOverTheAirInterval; + else + rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ /* FIXME: xmit power & preamble blah blah */ rpipe->descr.bmAttribute = (ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); @@ -477,7 +483,7 @@ error: */ int wa_rpipes_create(struct wahc *wa) { - wa->rpipes = wa->wa_descr->wNumRPipes; + wa->rpipes = le16_to_cpu(wa->wa_descr->wNumRPipes); wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long), GFP_KERNEL); if (wa->rpipe_bm == NULL) diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 6ad02f57c366..ed5abe87b049 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -91,7 +91,8 @@ #include "wusbhc.h" enum { - WA_SEGS_MAX = 255, + /* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */ + WA_SEGS_MAX = 128, }; enum wa_seg_status { @@ -107,6 +108,7 @@ enum wa_seg_status { }; static void wa_xfer_delayed_run(struct wa_rpipe *); +static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting); /* * Life cycle governed by 'struct urb' (the refcount of the struct is @@ -114,24 +116,27 @@ static void wa_xfer_delayed_run(struct wa_rpipe *); * struct). */ struct wa_seg { - struct urb urb; - struct urb *dto_urb; /* for data output? */ + struct urb tr_urb; /* transfer request urb. */ + struct urb *isoc_pack_desc_urb; /* for isoc packet descriptor. */ + struct urb *dto_urb; /* for data output. */ struct list_head list_node; /* for rpipe->req_list */ struct wa_xfer *xfer; /* out xfer */ u8 index; /* which segment we are */ + int isoc_frame_count; /* number of isoc frames in this segment. */ + int isoc_frame_offset; /* starting frame offset in the xfer URB. */ + int isoc_size; /* size of all isoc frames sent by this seg. */ enum wa_seg_status status; ssize_t result; /* bytes xfered or error */ struct wa_xfer_hdr xfer_hdr; - u8 xfer_extra[]; /* xtra space for xfer_hdr_ctl */ }; static inline void wa_seg_init(struct wa_seg *seg) { - usb_init_urb(&seg->urb); + usb_init_urb(&seg->tr_urb); /* set the remaining memory to 0. */ - memset(((void *)seg) + sizeof(seg->urb), 0, - sizeof(*seg) - sizeof(seg->urb)); + memset(((void *)seg) + sizeof(seg->tr_urb), 0, + sizeof(*seg) - sizeof(seg->tr_urb)); } /* @@ -153,12 +158,17 @@ struct wa_xfer { unsigned is_dma:1; size_t seg_size; int result; + /* Isoc frame that the current transfer buffer corresponds to. */ + int dto_isoc_frame_index; gfp_t gfp; /* allocation mask */ struct wusb_dev *wusb_dev; /* for activity timestamps */ }; +static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, + struct wa_seg *seg, int curr_iso_frame); + static inline void wa_xfer_init(struct wa_xfer *xfer) { kref_init(&xfer->refcnt); @@ -169,7 +179,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer) /* * Destroy a transfer structure * - * Note that freeing xfer->seg[cnt]->urb will free the containing + * Note that freeing xfer->seg[cnt]->tr_urb will free the containing * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs. */ static void wa_xfer_destroy(struct kref *_xfer) @@ -178,9 +188,17 @@ static void wa_xfer_destroy(struct kref *_xfer) if (xfer->seg) { unsigned cnt; for (cnt = 0; cnt < xfer->segs; cnt++) { - usb_free_urb(xfer->seg[cnt]->dto_urb); - usb_free_urb(&xfer->seg[cnt]->urb); + struct wa_seg *seg = xfer->seg[cnt]; + if (seg) { + usb_free_urb(seg->isoc_pack_desc_urb); + if (seg->dto_urb) { + kfree(seg->dto_urb->sg); + usb_free_urb(seg->dto_urb); + } + usb_free_urb(&seg->tr_urb); + } } + kfree(xfer->seg); } kfree(xfer); } @@ -196,6 +214,59 @@ static void wa_xfer_put(struct wa_xfer *xfer) } /* + * Try to get exclusive access to the DTO endpoint resource. Return true + * if successful. + */ +static inline int __wa_dto_try_get(struct wahc *wa) +{ + return (test_and_set_bit(0, &wa->dto_in_use) == 0); +} + +/* Release the DTO endpoint resource. */ +static inline void __wa_dto_put(struct wahc *wa) +{ + clear_bit_unlock(0, &wa->dto_in_use); +} + +/* Service RPIPEs that are waiting on the DTO resource. */ +static void wa_check_for_delayed_rpipes(struct wahc *wa) +{ + unsigned long flags; + int dto_waiting = 0; + struct wa_rpipe *rpipe; + + spin_lock_irqsave(&wa->rpipe_lock, flags); + while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) { + rpipe = list_first_entry(&wa->rpipe_delayed_list, + struct wa_rpipe, list_node); + __wa_xfer_delayed_run(rpipe, &dto_waiting); + /* remove this RPIPE from the list if it is not waiting. */ + if (!dto_waiting) { + pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n", + __func__, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + list_del_init(&rpipe->list_node); + } + } + spin_unlock_irqrestore(&wa->rpipe_lock, flags); +} + +/* add this RPIPE to the end of the delayed RPIPE list. */ +static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe) +{ + unsigned long flags; + + spin_lock_irqsave(&wa->rpipe_lock, flags); + /* add rpipe to the list if it is not already on it. */ + if (list_empty(&rpipe->list_node)) { + pr_debug("%s: adding RPIPE %d to the delayed list.\n", + __func__, le16_to_cpu(rpipe->descr.wRPipeIndex)); + list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list); + } + spin_unlock_irqrestore(&wa->rpipe_lock, flags); +} + +/* * xfer is referenced * * xfer->lock has to be unlocked @@ -232,6 +303,31 @@ static void wa_xfer_completion(struct wa_xfer *xfer) } /* + * Initialize a transfer's ID + * + * We need to use a sequential number; if we use the pointer or the + * hash of the pointer, it can repeat over sequential transfers and + * then it will confuse the HWA....wonder why in hell they put a 32 + * bit handle in there then. + */ +static void wa_xfer_id_init(struct wa_xfer *xfer) +{ + xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); +} + +/* Return the xfer's ID. */ +static inline u32 wa_xfer_id(struct wa_xfer *xfer) +{ + return xfer->id; +} + +/* Return the xfer's ID in transport format (little endian). */ +static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer) +{ + return cpu_to_le32(xfer->id); +} + +/* * If transfer is done, wrap it up and return true * * xfer->lock has to be locked @@ -253,33 +349,37 @@ static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) switch (seg->status) { case WA_SEG_DONE: if (found_short && seg->result > 0) { - dev_dbg(dev, "xfer %p#%u: bad short segments (%zu)\n", - xfer, cnt, seg->result); + dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n", + xfer, wa_xfer_id(xfer), cnt, + seg->result); urb->status = -EINVAL; goto out; } urb->actual_length += seg->result; - if (seg->result < xfer->seg_size + if (!(usb_pipeisoc(xfer->urb->pipe)) + && seg->result < xfer->seg_size && cnt != xfer->segs-1) found_short = 1; - dev_dbg(dev, "xfer %p#%u: DONE short %d " + dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d " "result %zu urb->actual_length %d\n", - xfer, seg->index, found_short, seg->result, - urb->actual_length); + xfer, wa_xfer_id(xfer), seg->index, found_short, + seg->result, urb->actual_length); break; case WA_SEG_ERROR: xfer->result = seg->result; - dev_dbg(dev, "xfer %p#%u: ERROR result %zu\n", - xfer, seg->index, seg->result); + dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zu(0x%08zX)\n", + xfer, wa_xfer_id(xfer), seg->index, seg->result, + seg->result); goto out; case WA_SEG_ABORTED: - dev_dbg(dev, "xfer %p#%u ABORTED: result %d\n", - xfer, seg->index, urb->status); + dev_dbg(dev, "xfer %p ID %08X#%u ABORTED: result %d\n", + xfer, wa_xfer_id(xfer), seg->index, + urb->status); xfer->result = urb->status; goto out; default: - dev_warn(dev, "xfer %p#%u: is_done bad state %d\n", - xfer, cnt, seg->status); + dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n", + xfer, wa_xfer_id(xfer), cnt, seg->status); xfer->result = -EINVAL; goto out; } @@ -290,29 +390,6 @@ out: } /* - * Initialize a transfer's ID - * - * We need to use a sequential number; if we use the pointer or the - * hash of the pointer, it can repeat over sequential transfers and - * then it will confuse the HWA....wonder why in hell they put a 32 - * bit handle in there then. - */ -static void wa_xfer_id_init(struct wa_xfer *xfer) -{ - xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); -} - -/* - * Return the xfer's ID associated with xfer - * - * Need to generate a - */ -static u32 wa_xfer_id(struct wa_xfer *xfer) -{ - return xfer->id; -} - -/* * Search for a transfer list ID on the HCD's URB list * * For 32 bit architectures, we use the pointer itself; for 64 bits, a @@ -356,15 +433,11 @@ static void __wa_xfer_abort_cb(struct urb *urb) * * The callback (see above) does nothing but freeing up the data by * putting the URB. Because the URB is allocated at the head of the - * struct, the whole space we allocated is kfreed. - * - * We'll get an 'aborted transaction' xfer result on DTI, that'll - * politely ignore because at this point the transaction has been - * marked as aborted already. + * struct, the whole space we allocated is kfreed. * */ -static void __wa_xfer_abort(struct wa_xfer *xfer) +static int __wa_xfer_abort(struct wa_xfer *xfer) { - int result; + int result = -ENOMEM; struct device *dev = &xfer->wa->usb_iface->dev; struct wa_xfer_abort_buffer *b; struct wa_rpipe *rpipe = xfer->ep->hcpriv; @@ -375,7 +448,7 @@ static void __wa_xfer_abort(struct wa_xfer *xfer) b->cmd.bLength = sizeof(b->cmd); b->cmd.bRequestType = WA_XFER_ABORT; b->cmd.wRPipe = rpipe->descr.wRPipeIndex; - b->cmd.dwTransferID = wa_xfer_id(xfer); + b->cmd.dwTransferID = wa_xfer_id_le32(xfer); usb_init_urb(&b->urb); usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, @@ -385,7 +458,7 @@ static void __wa_xfer_abort(struct wa_xfer *xfer) result = usb_submit_urb(&b->urb, GFP_ATOMIC); if (result < 0) goto error_submit; - return; /* callback frees! */ + return result; /* callback frees! */ error_submit: @@ -394,11 +467,52 @@ error_submit: xfer, result); kfree(b); error_kmalloc: - return; + return result; } /* + * Calculate the number of isoc frames starting from isoc_frame_offset + * that will fit a in transfer segment. + */ +static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer, + int isoc_frame_offset, int *total_size) +{ + int segment_size = 0, frame_count = 0; + int index = isoc_frame_offset; + struct usb_iso_packet_descriptor *iso_frame_desc = + xfer->urb->iso_frame_desc; + + while ((index < xfer->urb->number_of_packets) + && ((segment_size + iso_frame_desc[index].length) + <= xfer->seg_size)) { + /* + * For Alereon HWA devices, only include an isoc frame in a + * segment if it is physically contiguous with the previous + * frame. This is required because those devices expect + * the isoc frames to be sent as a single USB transaction as + * opposed to one transaction per frame with standard HWA. + */ + if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) + && (index > isoc_frame_offset) + && ((iso_frame_desc[index - 1].offset + + iso_frame_desc[index - 1].length) != + iso_frame_desc[index].offset)) + break; + + /* this frame fits. count it. */ + ++frame_count; + segment_size += iso_frame_desc[index].length; + + /* move to the next isoc frame. */ + ++index; + } + + *total_size = segment_size; + return frame_count; +} + +/* * * @returns < 0 on error, transfer segment request size if ok */ @@ -422,43 +536,92 @@ static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, result = sizeof(struct wa_xfer_bi); break; case USB_ENDPOINT_XFER_ISOC: - dev_err(dev, "FIXME: ISOC not implemented\n"); - result = -ENOSYS; - goto error; + if (usb_pipeout(urb->pipe)) { + *pxfer_type = WA_XFER_TYPE_ISO; + result = sizeof(struct wa_xfer_hwaiso); + } else { + dev_err(dev, "FIXME: ISOC IN not implemented\n"); + result = -ENOSYS; + goto error; + } + break; default: /* never happens */ BUG(); result = -EINVAL; /* shut gcc up */ - }; + } xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; - xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) - * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); - /* Compute the segment size and make sure it is a multiple of - * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of - * a check (FIXME) */ + maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); - if (xfer->seg_size < maxpktsize) { - dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize " - "%zu\n", xfer->seg_size, maxpktsize); - result = -EINVAL; - goto error; + if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) { + int index = 0; + + xfer->seg_size = maxpktsize; + xfer->segs = 0; + /* + * loop over urb->number_of_packets to determine how many + * xfer segments will be needed to send the isoc frames. + */ + while (index < urb->number_of_packets) { + int seg_size; /* don't care. */ + index += __wa_seg_calculate_isoc_frame_count(xfer, + index, &seg_size); + ++xfer->segs; + } + } else { + xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) + * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); + /* Compute the segment size and make sure it is a multiple of + * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of + * a check (FIXME) */ + if (xfer->seg_size < maxpktsize) { + dev_err(dev, + "HW BUG? seg_size %zu smaller than maxpktsize %zu\n", + xfer->seg_size, maxpktsize); + result = -EINVAL; + goto error; + } + xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; + xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, + xfer->seg_size); + if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) + xfer->segs = 1; } - xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; - xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, xfer->seg_size); - if (xfer->segs >= WA_SEGS_MAX) { - dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n", - (int)(urb->transfer_buffer_length / xfer->seg_size), + + if (xfer->segs > WA_SEGS_MAX) { + dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n", + (urb->transfer_buffer_length/xfer->seg_size), WA_SEGS_MAX); result = -EINVAL; goto error; } - if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) - xfer->segs = 1; error: return result; } +static void __wa_setup_isoc_packet_descr( + struct wa_xfer_packet_info_hwaiso *packet_desc, + struct wa_xfer *xfer, + struct wa_seg *seg) { + struct usb_iso_packet_descriptor *iso_frame_desc = + xfer->urb->iso_frame_desc; + int frame_index; + + /* populate isoc packet descriptor. */ + packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO; + packet_desc->wLength = cpu_to_le16(sizeof(*packet_desc) + + (sizeof(packet_desc->PacketLength[0]) * + seg->isoc_frame_count)); + for (frame_index = 0; frame_index < seg->isoc_frame_count; + ++frame_index) { + int offset_index = frame_index + seg->isoc_frame_offset; + packet_desc->PacketLength[frame_index] = + cpu_to_le16(iso_frame_desc[offset_index].length); + } +} + + /* Fill in the common request header and xfer-type specific data. */ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, struct wa_xfer_hdr *xfer_hdr0, @@ -466,12 +629,13 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, size_t xfer_hdr_size) { struct wa_rpipe *rpipe = xfer->ep->hcpriv; + struct wa_seg *seg = xfer->seg[0]; - xfer_hdr0 = &xfer->seg[0]->xfer_hdr; + xfer_hdr0 = &seg->xfer_hdr; xfer_hdr0->bLength = xfer_hdr_size; xfer_hdr0->bRequestType = xfer_type; xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; - xfer_hdr0->dwTransferID = wa_xfer_id(xfer); + xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer); xfer_hdr0->bTransferSegment = 0; switch (xfer_type) { case WA_XFER_TYPE_CTL: { @@ -484,8 +648,18 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, } case WA_XFER_TYPE_BI: break; - case WA_XFER_TYPE_ISO: - printk(KERN_ERR "FIXME: ISOC not implemented\n"); + case WA_XFER_TYPE_ISO: { + struct wa_xfer_hwaiso *xfer_iso = + container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr); + struct wa_xfer_packet_info_hwaiso *packet_desc = + ((void *)xfer_iso) + xfer_hdr_size; + + /* populate the isoc section of the transfer request. */ + xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count); + /* populate isoc packet descriptor. */ + __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); + break; + } default: BUG(); }; @@ -494,12 +668,12 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, /* * Callback for the OUT data phase of the segment request * - * Check wa_seg_cb(); most comments also apply here because this + * Check wa_seg_tr_cb(); most comments also apply here because this * function does almost the same thing and they work closely * together. * * If the seg request has failed but this DTO phase has succeeded, - * wa_seg_cb() has already failed the segment and moved the + * wa_seg_tr_cb() has already failed the segment and moved the * status to WA_SEG_ERROR, so this will go through 'case 0' and * effectively do nothing. */ @@ -512,6 +686,139 @@ static void wa_seg_dto_cb(struct urb *urb) struct wa_rpipe *rpipe; unsigned long flags; unsigned rpipe_ready = 0; + int data_send_done = 1, release_dto = 0, holding_dto = 0; + u8 done = 0; + int result; + + /* free the sg if it was used. */ + kfree(urb->sg); + urb->sg = NULL; + + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + if (usb_pipeisoc(xfer->urb->pipe)) { + /* Alereon HWA sends all isoc frames in a single transfer. */ + if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) + xfer->dto_isoc_frame_index += seg->isoc_frame_count; + else + xfer->dto_isoc_frame_index += 1; + if (xfer->dto_isoc_frame_index < seg->isoc_frame_count) { + data_send_done = 0; + holding_dto = 1; /* checked in error cases. */ + /* + * if this is the last isoc frame of the segment, we + * can release DTO after sending this frame. + */ + if ((xfer->dto_isoc_frame_index + 1) >= + seg->isoc_frame_count) + release_dto = 1; + } + dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n", + wa_xfer_id(xfer), seg->index, + xfer->dto_isoc_frame_index, holding_dto, release_dto); + } + spin_unlock_irqrestore(&xfer->lock, flags); + + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + seg->result += urb->actual_length; + if (data_send_done) { + dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n", + wa_xfer_id(xfer), seg->index, seg->result); + if (seg->status < WA_SEG_PENDING) + seg->status = WA_SEG_PENDING; + } else { + /* should only hit this for isoc xfers. */ + /* + * Populate the dto URB with the next isoc frame buffer, + * send the URB and release DTO if we no longer need it. + */ + __wa_populate_dto_urb_isoc(xfer, seg, + seg->isoc_frame_offset + + xfer->dto_isoc_frame_index); + + /* resubmit the URB with the next isoc frame. */ + result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n", + wa_xfer_id(xfer), seg->index, result); + spin_unlock_irqrestore(&xfer->lock, flags); + goto error_dto_submit; + } + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (release_dto) { + __wa_dto_put(wa); + wa_check_for_delayed_rpipes(wa); + } + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + if (holding_dto) { + __wa_dto_put(wa); + wa_check_for_delayed_rpipes(wa); + } + break; + default: /* Other errors ... */ + dev_err(dev, "xfer 0x%08X#%u: data out error %d\n", + wa_xfer_id(xfer), seg->index, urb->status); + goto error_default; + } + + return; + +error_dto_submit: +error_default: + spin_lock_irqsave(&xfer->lock, flags); + rpipe = xfer->ep->hcpriv; + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); + wa_reset_all(wa); + } + if (seg->status != WA_SEG_ERROR) { + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + __wa_xfer_abort(xfer); + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (holding_dto) { + __wa_dto_put(wa); + wa_check_for_delayed_rpipes(wa); + } + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + +} + +/* + * Callback for the isoc packet descriptor phase of the segment request + * + * Check wa_seg_tr_cb(); most comments also apply here because this + * function does almost the same thing and they work closely + * together. + * + * If the seg request has failed but this phase has succeeded, + * wa_seg_tr_cb() has already failed the segment and moved the + * status to WA_SEG_ERROR, so this will go through 'case 0' and + * effectively do nothing. + */ +static void wa_seg_iso_pack_desc_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned long flags; + unsigned rpipe_ready = 0; u8 done = 0; switch (urb->status) { @@ -519,11 +826,10 @@ static void wa_seg_dto_cb(struct urb *urb) spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; - dev_dbg(dev, "xfer %p#%u: data out done (%d bytes)\n", - xfer, seg->index, urb->actual_length); - if (seg->status < WA_SEG_PENDING) + dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n", + wa_xfer_id(xfer), seg->index); + if (xfer->is_inbound && seg->status < WA_SEG_PENDING) seg->status = WA_SEG_PENDING; - seg->result = urb->actual_length; spin_unlock_irqrestore(&xfer->lock, flags); break; case -ECONNRESET: /* URB unlinked; no need to do anything */ @@ -534,15 +840,15 @@ static void wa_seg_dto_cb(struct urb *urb) wa = xfer->wa; dev = &wa->usb_iface->dev; rpipe = xfer->ep->hcpriv; - dev_dbg(dev, "xfer %p#%u: data out error %d\n", - xfer, seg->index, urb->status); + pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n", + wa_xfer_id(xfer), seg->index, urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors " - "exceeded, resetting device\n"); + dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); wa_reset_all(wa); } if (seg->status != WA_SEG_ERROR) { + usb_unlink_urb(seg->dto_urb); seg->status = WA_SEG_ERROR; seg->result = urb->status; xfer->segs_done++; @@ -572,11 +878,11 @@ static void wa_seg_dto_cb(struct urb *urb) * We have to check before setting the status to WA_SEG_PENDING * because sometimes the xfer result callback arrives before this * callback (geeeeeeze), so it might happen that we are already in - * another state. As well, we don't set it if the transfer is inbound, + * another state. As well, we don't set it if the transfer is not inbound, * as in that case, wa_seg_dto_cb will do it when the OUT data phase * finishes. */ -static void wa_seg_cb(struct urb *urb) +static void wa_seg_tr_cb(struct urb *urb) { struct wa_seg *seg = urb->context; struct wa_xfer *xfer = seg->xfer; @@ -592,8 +898,11 @@ static void wa_seg_cb(struct urb *urb) spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; - dev_dbg(dev, "xfer %p#%u: request done\n", xfer, seg->index); - if (xfer->is_inbound && seg->status < WA_SEG_PENDING) + dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n", + xfer, wa_xfer_id(xfer), seg->index); + if (xfer->is_inbound && + seg->status < WA_SEG_PENDING && + !(usb_pipeisoc(xfer->urb->pipe))) seg->status = WA_SEG_PENDING; spin_unlock_irqrestore(&xfer->lock, flags); break; @@ -606,14 +915,16 @@ static void wa_seg_cb(struct urb *urb) dev = &wa->usb_iface->dev; rpipe = xfer->ep->hcpriv; if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: request error %d\n", - xfer, seg->index, urb->status); + dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n", + xfer, wa_xfer_id(xfer), seg->index, + urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "DTO: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } + usb_unlink_urb(seg->isoc_pack_desc_urb); usb_unlink_urb(seg->dto_urb); seg->status = WA_SEG_ERROR; seg->result = urb->status; @@ -629,9 +940,11 @@ static void wa_seg_cb(struct urb *urb) } } -/* allocate an SG list to store bytes_to_transfer bytes and copy the +/* + * Allocate an SG list to store bytes_to_transfer bytes and copy the * subset of the in_sg that matches the buffer subset - * we are about to transfer. */ + * we are about to transfer. + */ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, const unsigned int bytes_transferred, const unsigned int bytes_to_transfer, unsigned int *out_num_sgs) @@ -710,6 +1023,75 @@ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, } /* + * Populate DMA buffer info for the isoc dto urb. + */ +static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, + struct wa_seg *seg, int curr_iso_frame) +{ + seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + seg->dto_urb->sg = NULL; + seg->dto_urb->num_sgs = 0; + /* dto urb buffer address pulled from iso_frame_desc. */ + seg->dto_urb->transfer_dma = xfer->urb->transfer_dma + + xfer->urb->iso_frame_desc[curr_iso_frame].offset; + /* The Alereon HWA sends a single URB with all isoc segs. */ + if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) + seg->dto_urb->transfer_buffer_length = seg->isoc_size; + else + seg->dto_urb->transfer_buffer_length = + xfer->urb->iso_frame_desc[curr_iso_frame].length; +} + +/* + * Populate buffer ptr and size, DMA buffer or SG list for the dto urb. + */ +static int __wa_populate_dto_urb(struct wa_xfer *xfer, + struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size) +{ + int result = 0; + + if (xfer->is_dma) { + seg->dto_urb->transfer_dma = + xfer->urb->transfer_dma + buf_itr_offset; + seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + seg->dto_urb->sg = NULL; + seg->dto_urb->num_sgs = 0; + } else { + /* do buffer or SG processing. */ + seg->dto_urb->transfer_flags &= + ~URB_NO_TRANSFER_DMA_MAP; + /* this should always be 0 before a resubmit. */ + seg->dto_urb->num_mapped_sgs = 0; + + if (xfer->urb->transfer_buffer) { + seg->dto_urb->transfer_buffer = + xfer->urb->transfer_buffer + + buf_itr_offset; + seg->dto_urb->sg = NULL; + seg->dto_urb->num_sgs = 0; + } else { + seg->dto_urb->transfer_buffer = NULL; + + /* + * allocate an SG list to store seg_size bytes + * and copy the subset of the xfer->urb->sg that + * matches the buffer subset we are about to + * read. + */ + seg->dto_urb->sg = wa_xfer_create_subset_sg( + xfer->urb->sg, + buf_itr_offset, buf_itr_size, + &(seg->dto_urb->num_sgs)); + if (!(seg->dto_urb->sg)) + result = -ENOMEM; + } + } + seg->dto_urb->transfer_buffer_length = buf_itr_size; + + return result; +} + +/* * Allocate the segs array and initialize each of them * * The segments are freed by wa_xfer_destroy() when the xfer use count @@ -719,13 +1101,14 @@ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, */ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) { - int result, cnt; + int result, cnt, iso_frame_offset; size_t alloc_size = sizeof(*xfer->seg[0]) - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; struct usb_device *usb_dev = xfer->wa->usb_dev; const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; struct wa_seg *seg; size_t buf_itr, buf_size, buf_itr_size; + int xfer_isoc_frame_offset = 0; result = -ENOMEM; xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); @@ -733,18 +1116,35 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) goto error_segs_kzalloc; buf_itr = 0; buf_size = xfer->urb->transfer_buffer_length; + iso_frame_offset = 0; for (cnt = 0; cnt < xfer->segs; cnt++) { - seg = xfer->seg[cnt] = kmalloc(alloc_size, GFP_ATOMIC); + size_t iso_pkt_descr_size = 0; + int seg_isoc_frame_count = 0, seg_isoc_size = 0; + + if (usb_pipeisoc(xfer->urb->pipe)) { + seg_isoc_frame_count = + __wa_seg_calculate_isoc_frame_count(xfer, + xfer_isoc_frame_offset, &seg_isoc_size); + + iso_pkt_descr_size = + sizeof(struct wa_xfer_packet_info_hwaiso) + + (seg_isoc_frame_count * sizeof(__le16)); + } + seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size, + GFP_ATOMIC); if (seg == NULL) goto error_seg_kmalloc; wa_seg_init(seg); seg->xfer = xfer; seg->index = cnt; - usb_fill_bulk_urb(&seg->urb, usb_dev, + seg->isoc_frame_count = seg_isoc_frame_count; + seg->isoc_frame_offset = xfer_isoc_frame_offset; + seg->isoc_size = seg_isoc_size; + usb_fill_bulk_urb(&seg->tr_urb, usb_dev, usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), &seg->xfer_hdr, xfer_hdr_size, - wa_seg_cb, seg); + wa_seg_tr_cb, seg); buf_itr_size = min(buf_size, xfer->seg_size); if (xfer->is_inbound == 0 && buf_size > 0) { /* outbound data. */ @@ -756,69 +1156,64 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), NULL, 0, wa_seg_dto_cb, seg); - if (xfer->is_dma) { - seg->dto_urb->transfer_dma = - xfer->urb->transfer_dma + buf_itr; - seg->dto_urb->transfer_flags |= - URB_NO_TRANSFER_DMA_MAP; - seg->dto_urb->transfer_buffer = NULL; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; + + if (usb_pipeisoc(xfer->urb->pipe)) { + /* iso packet descriptor. */ + seg->isoc_pack_desc_urb = + usb_alloc_urb(0, GFP_ATOMIC); + if (seg->isoc_pack_desc_urb == NULL) + goto error_iso_pack_desc_alloc; + /* + * The buffer for the isoc packet descriptor + * after the transfer request header in the + * segment object memory buffer. + */ + usb_fill_bulk_urb( + seg->isoc_pack_desc_urb, usb_dev, + usb_sndbulkpipe(usb_dev, + dto_epd->bEndpointAddress), + (void *)(&seg->xfer_hdr) + + xfer_hdr_size, + iso_pkt_descr_size, + wa_seg_iso_pack_desc_cb, seg); + + /* + * Fill in the xfer buffer information for the + * first isoc frame. Subsequent frames in this + * segment will be filled in and sent from the + * DTO completion routine, if needed. + */ + __wa_populate_dto_urb_isoc(xfer, seg, + xfer_isoc_frame_offset); + /* adjust starting frame offset for next seg. */ + xfer_isoc_frame_offset += seg_isoc_frame_count; } else { - /* do buffer or SG processing. */ - seg->dto_urb->transfer_flags &= - ~URB_NO_TRANSFER_DMA_MAP; - /* this should always be 0 before a resubmit. */ - seg->dto_urb->num_mapped_sgs = 0; - - if (xfer->urb->transfer_buffer) { - seg->dto_urb->transfer_buffer = - xfer->urb->transfer_buffer + - buf_itr; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - } else { - /* allocate an SG list to store seg_size - bytes and copy the subset of the - xfer->urb->sg that matches the - buffer subset we are about to read. - */ - seg->dto_urb->sg = - wa_xfer_create_subset_sg( - xfer->urb->sg, - buf_itr, buf_itr_size, - &(seg->dto_urb->num_sgs)); - - if (!(seg->dto_urb->sg)) { - seg->dto_urb->num_sgs = 0; - goto error_sg_alloc; - } - - seg->dto_urb->transfer_buffer = NULL; - } + /* fill in the xfer buffer information. */ + result = __wa_populate_dto_urb(xfer, seg, + buf_itr, buf_itr_size); + if (result < 0) + goto error_seg_outbound_populate; + + buf_itr += buf_itr_size; + buf_size -= buf_itr_size; } - seg->dto_urb->transfer_buffer_length = buf_itr_size; } seg->status = WA_SEG_READY; - buf_itr += buf_itr_size; - buf_size -= buf_itr_size; } return 0; -error_sg_alloc: + /* + * Free the memory for the current segment which failed to init. + * Use the fact that cnt is left at were it failed. The remaining + * segments will be cleaned up by wa_xfer_destroy. + */ +error_iso_pack_desc_alloc: +error_seg_outbound_populate: usb_free_urb(xfer->seg[cnt]->dto_urb); error_dto_alloc: kfree(xfer->seg[cnt]); - cnt--; + xfer->seg[cnt] = NULL; error_seg_kmalloc: - /* use the fact that cnt is left at were it failed */ - for (; cnt >= 0; cnt--) { - if (xfer->seg[cnt] && xfer->is_inbound == 0) { - usb_free_urb(xfer->seg[cnt]->dto_urb); - kfree(xfer->seg[cnt]->dto_urb->sg); - } - kfree(xfer->seg[cnt]); - } error_segs_kzalloc: return result; } @@ -856,21 +1251,45 @@ static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) wa_xfer_id_init(xfer); __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); - /* Fill remainig headers */ + /* Fill remaining headers */ xfer_hdr = xfer_hdr0; - transfer_size = urb->transfer_buffer_length; - xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? - xfer->seg_size : transfer_size; - transfer_size -= xfer->seg_size; - for (cnt = 1; cnt < xfer->segs; cnt++) { - xfer_hdr = &xfer->seg[cnt]->xfer_hdr; - memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); - xfer_hdr->bTransferSegment = cnt; - xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ? - cpu_to_le32(xfer->seg_size) - : cpu_to_le32(transfer_size); - xfer->seg[cnt]->status = WA_SEG_READY; + if (xfer_type == WA_XFER_TYPE_ISO) { + xfer_hdr0->dwTransferLength = + cpu_to_le32(xfer->seg[0]->isoc_size); + for (cnt = 1; cnt < xfer->segs; cnt++) { + struct wa_xfer_packet_info_hwaiso *packet_desc; + struct wa_seg *seg = xfer->seg[cnt]; + + xfer_hdr = &seg->xfer_hdr; + packet_desc = ((void *)xfer_hdr) + xfer_hdr_size; + /* + * Copy values from the 0th header. Segment specific + * values are set below. + */ + memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); + xfer_hdr->bTransferSegment = cnt; + xfer_hdr->dwTransferLength = + cpu_to_le32(seg->isoc_size); + __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); + seg->status = WA_SEG_READY; + } + } else { + transfer_size = urb->transfer_buffer_length; + xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? + cpu_to_le32(xfer->seg_size) : + cpu_to_le32(transfer_size); transfer_size -= xfer->seg_size; + for (cnt = 1; cnt < xfer->segs; cnt++) { + xfer_hdr = &xfer->seg[cnt]->xfer_hdr; + memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); + xfer_hdr->bTransferSegment = cnt; + xfer_hdr->dwTransferLength = + transfer_size > xfer->seg_size ? + cpu_to_le32(xfer->seg_size) + : cpu_to_le32(transfer_size); + xfer->seg[cnt]->status = WA_SEG_READY; + transfer_size -= xfer->seg_size; + } } xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ result = 0; @@ -885,20 +1304,46 @@ error_setup_sizes: * rpipe->seg_lock is held! */ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, - struct wa_seg *seg) + struct wa_seg *seg, int *dto_done) { int result; - result = usb_submit_urb(&seg->urb, GFP_ATOMIC); + + /* default to done unless we encounter a multi-frame isoc segment. */ + *dto_done = 1; + + /* submit the transfer request. */ + result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC); if (result < 0) { - printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n", - xfer, seg->index, result); + pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", + __func__, xfer, seg->index, result); goto error_seg_submit; } + /* submit the isoc packet descriptor if present. */ + if (seg->isoc_pack_desc_urb) { + struct wahc *wa = xfer->wa; + + result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC); + if (result < 0) { + pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", + __func__, xfer, seg->index, result); + goto error_iso_pack_desc_submit; + } + xfer->dto_isoc_frame_index = 0; + /* + * If this segment contains more than one isoc frame, hold + * onto the dto resource until we send all frames. + * Only applies to non-Alereon devices. + */ + if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0) + && (seg->isoc_frame_count > 1)) + *dto_done = 0; + } + /* submit the out data if this is an out request. */ if (seg->dto_urb) { result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); if (result < 0) { - printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n", - xfer, seg->index, result); + pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", + __func__, xfer, seg->index, result); goto error_dto_submit; } } @@ -907,38 +1352,48 @@ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, return 0; error_dto_submit: - usb_unlink_urb(&seg->urb); + usb_unlink_urb(seg->isoc_pack_desc_urb); +error_iso_pack_desc_submit: + usb_unlink_urb(&seg->tr_urb); error_seg_submit: seg->status = WA_SEG_ERROR; seg->result = result; + *dto_done = 1; return result; } /* - * Execute more queued request segments until the maximum concurrent allowed + * Execute more queued request segments until the maximum concurrent allowed. + * Return true if the DTO resource was acquired and released. * * The ugly unlock/lock sequence on the error path is needed as the * xfer->lock normally nests the seg_lock and not viceversa. - * */ -static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) +static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) { - int result; + int result, dto_acquired = 0, dto_done = 0; struct device *dev = &rpipe->wa->usb_iface->dev; struct wa_seg *seg; struct wa_xfer *xfer; unsigned long flags; + *dto_waiting = 0; + spin_lock_irqsave(&rpipe->seg_lock, flags); while (atomic_read(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list)) { + && !list_empty(&rpipe->seg_list) + && (dto_acquired = __wa_dto_try_get(rpipe->wa))) { seg = list_first_entry(&(rpipe->seg_list), struct wa_seg, list_node); list_del(&seg->list_node); xfer = seg->xfer; - result = __wa_seg_submit(rpipe, xfer, seg); - dev_dbg(dev, "xfer %p#%u submitted from delayed [%d segments available] %d\n", - xfer, seg->index, atomic_read(&rpipe->segs_available), result); + result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); + /* release the dto resource if this RPIPE is done with it. */ + if (dto_done) + __wa_dto_put(rpipe->wa); + dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n", + xfer, wa_xfer_id(xfer), seg->index, + atomic_read(&rpipe->segs_available), result); if (unlikely(result < 0)) { spin_unlock_irqrestore(&rpipe->seg_lock, flags); spin_lock_irqsave(&xfer->lock, flags); @@ -948,7 +1403,37 @@ static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) spin_lock_irqsave(&rpipe->seg_lock, flags); } } + /* + * Mark this RPIPE as waiting if dto was not acquired, there are + * delayed segs and no active transfers to wake us up later. + */ + if (!dto_acquired && !list_empty(&rpipe->seg_list) + && (atomic_read(&rpipe->segs_available) == + le16_to_cpu(rpipe->descr.wRequests))) + *dto_waiting = 1; + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + + return dto_done; +} + +static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) +{ + int dto_waiting; + int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting); + + /* + * If this RPIPE is waiting on the DTO resource, add it to the tail of + * the waiting list. + * Otherwise, if the WA DTO resource was acquired and released by + * __wa_xfer_delayed_run, another RPIPE may have attempted to acquire + * DTO and failed during that time. Check the delayed list and process + * any waiters. Start searching from the next RPIPE index. + */ + if (dto_waiting) + wa_add_delayed_rpipe(rpipe->wa, rpipe); + else if (dto_done) + wa_check_for_delayed_rpipes(rpipe->wa); } /* @@ -960,7 +1445,7 @@ static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) */ static int __wa_xfer_submit(struct wa_xfer *xfer) { - int result; + int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0; struct wahc *wa = xfer->wa; struct device *dev = &wa->usb_iface->dev; unsigned cnt; @@ -979,27 +1464,58 @@ static int __wa_xfer_submit(struct wa_xfer *xfer) result = 0; spin_lock_irqsave(&rpipe->seg_lock, flags); for (cnt = 0; cnt < xfer->segs; cnt++) { + int delay_seg = 1; + available = atomic_read(&rpipe->segs_available); empty = list_empty(&rpipe->seg_list); seg = xfer->seg[cnt]; - dev_dbg(dev, "xfer %p#%u: available %u empty %u (%s)\n", - xfer, cnt, available, empty, - available == 0 || !empty ? "delayed" : "submitted"); - if (available == 0 || !empty) { - dev_dbg(dev, "xfer %p#%u: delayed\n", xfer, cnt); + if (available && empty) { + /* + * Only attempt to acquire DTO if we have a segment + * to send. + */ + dto_acquired = __wa_dto_try_get(rpipe->wa); + if (dto_acquired) { + delay_seg = 0; + result = __wa_seg_submit(rpipe, xfer, seg, + &dto_done); + dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n", + xfer, wa_xfer_id(xfer), cnt, available, + empty); + if (dto_done) + __wa_dto_put(rpipe->wa); + + if (result < 0) { + __wa_xfer_abort(xfer); + goto error_seg_submit; + } + } + } + + if (delay_seg) { + dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n", + xfer, wa_xfer_id(xfer), cnt, available, empty); seg->status = WA_SEG_DELAYED; list_add_tail(&seg->list_node, &rpipe->seg_list); - } else { - result = __wa_seg_submit(rpipe, xfer, seg); - if (result < 0) { - __wa_xfer_abort(xfer); - goto error_seg_submit; - } } xfer->segs_submitted++; } error_seg_submit: + /* + * Mark this RPIPE as waiting if dto was not acquired, there are + * delayed segs and no active transfers to wake us up later. + */ + if (!dto_acquired && !list_empty(&rpipe->seg_list) + && (atomic_read(&rpipe->segs_available) == + le16_to_cpu(rpipe->descr.wRequests))) + dto_waiting = 1; spin_unlock_irqrestore(&rpipe->seg_lock, flags); + + if (dto_waiting) + wa_add_delayed_rpipe(rpipe->wa, rpipe); + else if (dto_done) + wa_check_for_delayed_rpipes(rpipe->wa); + return result; } @@ -1025,7 +1541,7 @@ error_seg_submit: * result never kicks in, the xfer will timeout from the USB code and * dequeue() will be called. */ -static void wa_urb_enqueue_b(struct wa_xfer *xfer) +static int wa_urb_enqueue_b(struct wa_xfer *xfer) { int result; unsigned long flags; @@ -1036,18 +1552,22 @@ static void wa_urb_enqueue_b(struct wa_xfer *xfer) unsigned done; result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); - if (result < 0) + if (result < 0) { + pr_err("%s: error_rpipe_get\n", __func__); goto error_rpipe_get; + } result = -ENODEV; /* FIXME: segmentation broken -- kills DWA */ mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ if (urb->dev == NULL) { mutex_unlock(&wusbhc->mutex); + pr_err("%s: error usb dev gone\n", __func__); goto error_dev_gone; } wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); if (wusb_dev == NULL) { mutex_unlock(&wusbhc->mutex); + pr_err("%s: error wusb dev gone\n", __func__); goto error_dev_gone; } mutex_unlock(&wusbhc->mutex); @@ -1055,21 +1575,28 @@ static void wa_urb_enqueue_b(struct wa_xfer *xfer) spin_lock_irqsave(&xfer->lock, flags); xfer->wusb_dev = wusb_dev; result = urb->status; - if (urb->status != -EINPROGRESS) + if (urb->status != -EINPROGRESS) { + pr_err("%s: error_dequeued\n", __func__); goto error_dequeued; + } result = __wa_xfer_setup(xfer, urb); - if (result < 0) + if (result < 0) { + pr_err("%s: error_xfer_setup\n", __func__); goto error_xfer_setup; + } result = __wa_xfer_submit(xfer); - if (result < 0) + if (result < 0) { + pr_err("%s: error_xfer_submit\n", __func__); goto error_xfer_submit; + } spin_unlock_irqrestore(&xfer->lock, flags); - return; + return 0; - /* this is basically wa_xfer_completion() broken up wa_xfer_giveback() - * does a wa_xfer_put() that will call wa_xfer_destroy() and clean - * upundo setup(). + /* + * this is basically wa_xfer_completion() broken up wa_xfer_giveback() + * does a wa_xfer_put() that will call wa_xfer_destroy() and undo + * setup(). */ error_xfer_setup: error_dequeued: @@ -1081,8 +1608,7 @@ error_dev_gone: rpipe_put(xfer->ep->hcpriv); error_rpipe_get: xfer->result = result; - wa_xfer_giveback(xfer); - return; + return result; error_xfer_submit: done = __wa_xfer_is_done(xfer); @@ -1090,6 +1616,8 @@ error_xfer_submit: spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); + /* return success since the completion routine will run. */ + return 0; } /* @@ -1123,7 +1651,8 @@ void wa_urb_enqueue_run(struct work_struct *ws) list_del_init(&xfer->list_node); urb = xfer->urb; - wa_urb_enqueue_b(xfer); + if (wa_urb_enqueue_b(xfer) < 0) + wa_xfer_giveback(xfer); usb_put_urb(urb); /* taken when queuing */ } } @@ -1229,7 +1758,19 @@ int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); queue_work(wusbd, &wa->xfer_enqueue_work); } else { - wa_urb_enqueue_b(xfer); + result = wa_urb_enqueue_b(xfer); + if (result < 0) { + /* + * URB submit/enqueue failed. Clean up, return an + * error and do not run the callback. This avoids + * an infinite submit/complete loop. + */ + dev_err(dev, "%s: URB enqueue failed: %d\n", + __func__, result); + wa_put(xfer->wa); + wa_xfer_put(xfer); + return result; + } } return 0; @@ -1264,7 +1805,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) struct wa_xfer *xfer; struct wa_seg *seg; struct wa_rpipe *rpipe; - unsigned cnt; + unsigned cnt, done = 0, xfer_abort_pending; unsigned rpipe_ready = 0; xfer = urb->hcpriv; @@ -1278,6 +1819,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) goto out; } spin_lock_irqsave(&xfer->lock, flags); + pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer)); rpipe = xfer->ep->hcpriv; if (rpipe == NULL) { pr_debug("%s: xfer id 0x%08X has no RPIPE. %s", @@ -1293,9 +1835,11 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) if (xfer->seg == NULL) /* still hasn't reached */ goto out_unlock; /* setup(), enqueue_b() completes */ /* Ok, the xfer is in flight already, it's been setup and submitted.*/ - __wa_xfer_abort(xfer); + xfer_abort_pending = __wa_xfer_abort(xfer) >= 0; for (cnt = 0; cnt < xfer->segs; cnt++) { seg = xfer->seg[cnt]; + pr_debug("%s: xfer id 0x%08X#%d status = %d\n", + __func__, wa_xfer_id(xfer), cnt, seg->status); switch (seg->status) { case WA_SEG_NOTREADY: case WA_SEG_READY: @@ -1304,42 +1848,50 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) WARN_ON(1); break; case WA_SEG_DELAYED: + /* + * delete from rpipe delayed list. If no segments on + * this xfer have been submitted, __wa_xfer_is_done will + * trigger a giveback below. Otherwise, the submitted + * segments will be completed in the DTI interrupt. + */ seg->status = WA_SEG_ABORTED; spin_lock_irqsave(&rpipe->seg_lock, flags2); list_del(&seg->list_node); xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); spin_unlock_irqrestore(&rpipe->seg_lock, flags2); break; - case WA_SEG_SUBMITTED: - seg->status = WA_SEG_ABORTED; - usb_unlink_urb(&seg->urb); - if (xfer->is_inbound == 0) - usb_unlink_urb(seg->dto_urb); - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - break; - case WA_SEG_PENDING: - seg->status = WA_SEG_ABORTED; - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - break; - case WA_SEG_DTI_PENDING: - usb_unlink_urb(wa->dti_urb); - seg->status = WA_SEG_ABORTED; - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - break; case WA_SEG_DONE: case WA_SEG_ERROR: case WA_SEG_ABORTED: break; + /* + * In the states below, the HWA device already knows + * about the transfer. If an abort request was sent, + * allow the HWA to process it and wait for the + * results. Otherwise, the DTI state and seg completed + * counts can get out of sync. + */ + case WA_SEG_SUBMITTED: + case WA_SEG_PENDING: + case WA_SEG_DTI_PENDING: + /* + * Check if the abort was successfully sent. This could + * be false if the HWA has been removed but we haven't + * gotten the disconnect notification yet. + */ + if (!xfer_abort_pending) { + seg->status = WA_SEG_ABORTED; + rpipe_ready = rpipe_avail_inc(rpipe); + xfer->segs_done++; + } + break; } } xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ - __wa_xfer_is_done(xfer); + done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_completion(xfer); + if (done) + wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); return 0; @@ -1410,13 +1962,56 @@ static int wa_xfer_status_to_errno(u8 status) } /* + * If a last segment flag and/or a transfer result error is encountered, + * no other segment transfer results will be returned from the device. + * Mark the remaining submitted or pending xfers as completed so that + * the xfer will complete cleanly. + */ +static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, + struct wa_seg *incoming_seg) +{ + int index; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + for (index = incoming_seg->index + 1; index < xfer->segs_submitted; + index++) { + struct wa_seg *current_seg = xfer->seg[index]; + + BUG_ON(current_seg == NULL); + + switch (current_seg->status) { + case WA_SEG_SUBMITTED: + case WA_SEG_PENDING: + case WA_SEG_DTI_PENDING: + rpipe_avail_inc(rpipe); + /* + * do not increment RPIPE avail for the WA_SEG_DELAYED case + * since it has not been submitted to the RPIPE. + */ + case WA_SEG_DELAYED: + xfer->segs_done++; + current_seg->status = incoming_seg->status; + break; + case WA_SEG_ABORTED: + break; + default: + WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n", + __func__, wa_xfer_id(xfer), index, + current_seg->status); + break; + } + } +} + +/* * Process a xfer result completion message * - * inbound transfers: need to schedule a DTI read + * inbound transfers: need to schedule a buf_in_urb read * * FIXME: this function needs to be broken up in parts */ -static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) +static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, + struct wa_xfer_result *xfer_result) { int result; struct device *dev = &wa->usb_iface->dev; @@ -1424,8 +2019,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) u8 seg_idx; struct wa_seg *seg; struct wa_rpipe *rpipe; - struct wa_xfer_result *xfer_result = wa->xfer_result; - u8 done = 0; + unsigned done = 0; u8 usb_status; unsigned rpipe_ready = 0; @@ -1436,8 +2030,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) seg = xfer->seg[seg_idx]; rpipe = xfer->ep->hcpriv; usb_status = xfer_result->bTransferStatus; - dev_dbg(dev, "xfer %p#%u: bTransferStatus 0x%02x (seg status %u)\n", - xfer, seg_idx, usb_status, seg->status); + dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n", + xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status); if (seg->status == WA_SEG_ABORTED || seg->status == WA_SEG_ERROR) /* already handled */ goto segment_aborted; @@ -1453,12 +2047,19 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) seg->result = wa_xfer_status_to_errno(usb_status); dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n", xfer, xfer->id, seg->index, usb_status); + seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ? + WA_SEG_ABORTED : WA_SEG_ERROR; goto error_complete; } /* FIXME: we ignore warnings, tally them for stats */ if (usb_status & 0x40) /* Warning?... */ usb_status = 0; /* ... pass */ - if (xfer->is_inbound) { /* IN data phase: read to buffer */ + if (usb_pipeisoc(xfer->urb->pipe)) { + /* set up WA state to read the isoc packet status next. */ + wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer); + wa->dti_isoc_xfer_seg = seg_idx; + wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING; + } else if (xfer->is_inbound) { /* IN data phase: read to buffer */ seg->status = WA_SEG_DTI_PENDING; BUG_ON(wa->buf_in_urb->status == -EINPROGRESS); /* this should always be 0 before a resubmit. */ @@ -1535,12 +2136,14 @@ error_submit_buf_in: xfer, seg_idx, result); seg->result = result; kfree(wa->buf_in_urb->sg); + wa->buf_in_urb->sg = NULL; error_sg_alloc: __wa_xfer_abort(xfer); -error_complete: seg->status = WA_SEG_ERROR; +error_complete: xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); + wa_complete_remaining_xfer_segs(xfer, seg); done = __wa_xfer_is_done(xfer); /* * queue work item to clear STALL for control endpoints. @@ -1552,10 +2155,8 @@ error_complete: dev_info(dev, "Control EP stall. Queue delayed work.\n"); spin_lock_irq(&wa->xfer_list_lock); - /* remove xfer from xfer_list. */ - list_del(&xfer->list_node); - /* add xfer to xfer_errored_list. */ - list_add_tail(&xfer->list_node, &wa->xfer_errored_list); + /* move xfer from xfer_list to xfer_errored_list. */ + list_move_tail(&xfer->list_node, &wa->xfer_errored_list); spin_unlock_irq(&wa->xfer_list_lock); spin_unlock_irqrestore(&xfer->lock, flags); queue_work(wusbd, &wa->xfer_error_work); @@ -1587,6 +2188,90 @@ segment_aborted: } /* + * Process a isochronous packet status message + * + * inbound transfers: need to schedule a buf_in_urb read + */ +static void wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) +{ + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer_packet_status_hwaiso *packet_status; + struct wa_xfer_packet_status_len_hwaiso *status_array; + struct wa_xfer *xfer; + unsigned long flags; + struct wa_seg *seg; + struct wa_rpipe *rpipe; + unsigned done = 0; + unsigned rpipe_ready = 0, seg_index; + int expected_size; + + /* We have a xfer result buffer; check it */ + dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n", + urb->actual_length, urb->transfer_buffer); + packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf); + if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) { + dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n", + packet_status->bPacketType); + goto error_parse_buffer; + } + xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress); + if (xfer == NULL) { + dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n", + wa->dti_isoc_xfer_in_progress); + goto error_parse_buffer; + } + spin_lock_irqsave(&xfer->lock, flags); + if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs)) + goto error_bad_seg; + seg = xfer->seg[wa->dti_isoc_xfer_seg]; + rpipe = xfer->ep->hcpriv; + expected_size = sizeof(*packet_status) + + (sizeof(packet_status->PacketStatus[0]) * + seg->isoc_frame_count); + if (urb->actual_length != expected_size) { + dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %d needed)\n", + urb->actual_length, expected_size); + goto error_bad_seg; + } + if (le16_to_cpu(packet_status->wLength) != expected_size) { + dev_err(dev, "DTI Error: isoc packet status--bad length %u\n", + le16_to_cpu(packet_status->wLength)); + goto error_bad_seg; + } + /* isoc packet status and lengths back xfer urb. */ + status_array = packet_status->PacketStatus; + for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) { + xfer->urb->iso_frame_desc[seg->index].status = + wa_xfer_status_to_errno( + le16_to_cpu(status_array[seg_index].PacketStatus)); + xfer->urb->iso_frame_desc[seg->index].actual_length = + le16_to_cpu(status_array[seg_index].PacketLength); + } + + if (!xfer->is_inbound) { + /* OUT transfer, complete it -- */ + seg->status = WA_SEG_DONE; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + wa_xfer_put(xfer); + return; + +error_bad_seg: + spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_put(xfer); +error_parse_buffer: + return; +} + +/* * Callback for the IN data phase * * If successful transition state; otherwise, take a note of the @@ -1687,56 +2372,61 @@ static void wa_buf_in_cb(struct urb *urb) * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many * errors) in the URBs. */ -static void wa_xfer_result_cb(struct urb *urb) +static void wa_dti_cb(struct urb *urb) { int result; struct wahc *wa = urb->context; struct device *dev = &wa->usb_iface->dev; - struct wa_xfer_result *xfer_result; u32 xfer_id; - struct wa_xfer *xfer; u8 usb_status; BUG_ON(wa->dti_urb != urb); switch (wa->dti_urb->status) { case 0: - /* We have a xfer result buffer; check it */ - dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", - urb->actual_length, urb->transfer_buffer); - if (wa->dti_urb->actual_length != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--bad size " - "xfer result (%d bytes vs %zu needed)\n", - urb->actual_length, sizeof(*xfer_result)); - break; - } - xfer_result = wa->xfer_result; - if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--" - "bad header length %u\n", - xfer_result->hdr.bLength); - break; - } - if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { - dev_err(dev, "DTI Error: xfer result--" - "bad header type 0x%02x\n", - xfer_result->hdr.bNotifyType); - break; - } - usb_status = xfer_result->bTransferStatus & 0x3f; - if (usb_status == WA_XFER_STATUS_NOT_FOUND) - /* taken care of already */ - break; - xfer_id = xfer_result->dwTransferID; - xfer = wa_xfer_get_by_id(wa, xfer_id); - if (xfer == NULL) { - /* FIXME: transaction might have been cancelled */ - dev_err(dev, "DTI Error: xfer result--" - "unknown xfer 0x%08x (status 0x%02x)\n", - xfer_id, usb_status); - break; + if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) { + struct wa_xfer_result *xfer_result; + struct wa_xfer *xfer; + + /* We have a xfer result buffer; check it */ + dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", + urb->actual_length, urb->transfer_buffer); + if (urb->actual_length != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n", + urb->actual_length, + sizeof(*xfer_result)); + break; + } + xfer_result = (struct wa_xfer_result *)(wa->dti_buf); + if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--bad header length %u\n", + xfer_result->hdr.bLength); + break; + } + if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { + dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n", + xfer_result->hdr.bNotifyType); + break; + } + usb_status = xfer_result->bTransferStatus & 0x3f; + if (usb_status == WA_XFER_STATUS_NOT_FOUND) + /* taken care of already */ + break; + xfer_id = le32_to_cpu(xfer_result->dwTransferID); + xfer = wa_xfer_get_by_id(wa, xfer_id); + if (xfer == NULL) { + /* FIXME: transaction not found. */ + dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n", + xfer_id, usb_status); + break; + } + wa_xfer_result_chew(wa, xfer, xfer_result); + wa_xfer_put(xfer); + } else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) { + wa_process_iso_packet_status(wa, urb); + } else { + dev_err(dev, "DTI Error: unexpected EP state = %d\n", + wa->dti_state); } - wa_xfer_result_chew(wa, xfer); - wa_xfer_put(xfer); break; case -ENOENT: /* (we killed the URB)...so, no broadcast */ case -ESHUTDOWN: /* going away! */ @@ -1777,7 +2467,7 @@ out: * don't really set it up and start it until the first xfer complete * notification arrives, which is what we do here. * - * Follow up in wa_xfer_result_cb(), as that's where the whole state + * Follow up in wa_dti_cb(), as that's where the whole state * machine starts. * * So here we just initialize the DTI URB for reading transfer result @@ -1813,8 +2503,8 @@ void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) usb_fill_bulk_urb( wa->dti_urb, wa->usb_dev, usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), - wa->xfer_result, wa->xfer_result_size, - wa_xfer_result_cb, wa); + wa->dti_buf, wa->dti_buf_size, + wa_dti_cb, wa); wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (wa->buf_in_urb == NULL) { @@ -1836,6 +2526,7 @@ out: error_dti_urb_submit: usb_put_urb(wa->buf_in_urb); + wa->buf_in_urb = NULL; error_buf_in_urb_alloc: usb_put_urb(wa->dti_urb); wa->dti_urb = NULL; |
