diff options
Diffstat (limited to 'drivers/usb/serial/omninet.c')
| -rw-r--r-- | drivers/usb/serial/omninet.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index ea1105c84d50..ec16b92d52b3 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -74,29 +74,28 @@ static struct usb_serial_driver * const serial_drivers[] = { }; -/* The protocol. +/* + * The protocol. * * The omni.net always exchange 64 bytes of data with the host. The first - * four bytes are the control header, you can see it in the above structure. + * four bytes are the control header. * * oh_seq is a sequence number. Don't know if/how it's used. * oh_len is the length of the data bytes in the packet. * oh_xxx Bit-mapped, related to handshaking and status info. - * I normally set it to 0x03 in trasmitted frames. + * I normally set it to 0x03 in transmitted frames. * 7: Active when the TA is in a CONNECTed state. * 6: unknown * 5: handshaking, unknown * 4: handshaking, unknown * 3: unknown, usually 0 * 2: unknown, usually 0 - * 1: handshaking, unknown, usually set to 1 in trasmitted frames - * 0: handshaking, unknown, usually set to 1 in trasmitted frames + * 1: handshaking, unknown, usually set to 1 in transmitted frames + * 0: handshaking, unknown, usually set to 1 in transmitted frames * oh_pad Probably a pad byte. * * After the header you will find data bytes if oh_len was greater than zero. - * */ - struct omninet_header { __u8 oh_seq; __u8 oh_len; |
