diff options
Diffstat (limited to 'drivers/usb/gadget/file_storage.c')
| -rw-r--r-- | drivers/usb/gadget/file_storage.c | 3656 |
1 files changed, 0 insertions, 3656 deletions
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c deleted file mode 100644 index 3f7d640b6758..000000000000 --- a/drivers/usb/gadget/file_storage.c +++ /dev/null @@ -1,3656 +0,0 @@ -/* - * file_storage.c -- File-backed USB Storage Gadget, for USB development - * - * Copyright (C) 2003-2008 Alan Stern - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -/* - * The File-backed Storage Gadget acts as a USB Mass Storage device, - * appearing to the host as a disk drive or as a CD-ROM drive. In addition - * to providing an example of a genuinely useful gadget driver for a USB - * device, it also illustrates a technique of double-buffering for increased - * throughput. Last but not least, it gives an easy way to probe the - * behavior of the Mass Storage drivers in a USB host. - * - * Backing storage is provided by a regular file or a block device, specified - * by the "file" module parameter. Access can be limited to read-only by - * setting the optional "ro" module parameter. (For CD-ROM emulation, - * access is always read-only.) The gadget will indicate that it has - * removable media if the optional "removable" module parameter is set. - * - * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), - * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected - * by the optional "transport" module parameter. It also supports the - * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), - * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by - * the optional "protocol" module parameter. In addition, the default - * Vendor ID, Product ID, release number and serial number can be overridden. - * - * There is support for multiple logical units (LUNs), each of which has - * its own backing file. The number of LUNs can be set using the optional - * "luns" module parameter (anywhere from 1 to 8), and the corresponding - * files are specified using comma-separated lists for "file" and "ro". - * The default number of LUNs is taken from the number of "file" elements; - * it is 1 if "file" is not given. If "removable" is not set then a backing - * file must be specified for each LUN. If it is set, then an unspecified - * or empty backing filename means the LUN's medium is not loaded. Ideally - * each LUN would be settable independently as a disk drive or a CD-ROM - * drive, but currently all LUNs have to be the same type. The CD-ROM - * emulation includes a single data track and no audio tracks; hence there - * need be only one backing file per LUN. - * - * Requirements are modest; only a bulk-in and a bulk-out endpoint are - * needed (an interrupt-out endpoint is also needed for CBI). The memory - * requirement amounts to two 16K buffers, size configurable by a parameter. - * Support is included for both full-speed and high-speed operation. - * - * Note that the driver is slightly non-portable in that it assumes a - * single memory/DMA buffer will be useable for bulk-in, bulk-out, and - * interrupt-in endpoints. With most device controllers this isn't an - * issue, but there may be some with hardware restrictions that prevent - * a buffer from being used by more than one endpoint. - * - * Module options: - * - * file=filename[,filename...] - * Required if "removable" is not set, names of - * the files or block devices used for - * backing storage - * serial=HHHH... Required serial number (string of hex chars) - * ro=b[,b...] Default false, booleans for read-only access - * removable Default false, boolean for removable media - * luns=N Default N = number of filenames, number of - * LUNs to support - * nofua=b[,b...] Default false, booleans for ignore FUA flag - * in SCSI WRITE(10,12) commands - * stall Default determined according to the type of - * USB device controller (usually true), - * boolean to permit the driver to halt - * bulk endpoints - * cdrom Default false, boolean for whether to emulate - * a CD-ROM drive - * transport=XXX Default BBB, transport name (CB, CBI, or BBB) - * protocol=YYY Default SCSI, protocol name (RBC, 8020 or - * ATAPI, QIC, UFI, 8070, or SCSI; - * also 1 - 6) - * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID - * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID - * release=0xRRRR Override the USB release number (bcdDevice) - * buflen=N Default N=16384, buffer size used (will be - * rounded down to a multiple of - * PAGE_CACHE_SIZE) - * - * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", - * "removable", "luns", "nofua", "stall", and "cdrom" options are available; - * default values are used for everything else. - * - * The pathnames of the backing files and the ro settings are available in - * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of - * the gadget's sysfs directory. If the "removable" option is set, writing to - * these files will simulate ejecting/loading the medium (writing an empty - * line means eject) and adjusting a write-enable tab. Changes to the ro - * setting are not allowed when the medium is loaded or if CD-ROM emulation - * is being used. - * - * This gadget driver is heavily based on "Gadget Zero" by David Brownell. - * The driver's SCSI command interface was based on the "Information - * technology - Small Computer System Interface - 2" document from - * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at - * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception - * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the - * "Universal Serial Bus Mass Storage Class UFI Command Specification" - * document, Revision 1.0, December 14, 1998, available at - * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. - */ - - -/* - * Driver Design - * - * The FSG driver is fairly straightforward. There is a main kernel - * thread that handles most of the work. Interrupt routines field - * callbacks from the controller driver: bulk- and interrupt-request - * completion notifications, endpoint-0 events, and disconnect events. - * Completion events are passed to the main thread by wakeup calls. Many - * ep0 requests are handled at interrupt time, but SetInterface, - * SetConfiguration, and device reset requests are forwarded to the - * thread in the form of "exceptions" using SIGUSR1 signals (since they - * should interrupt any ongoing file I/O operations). - * - * The thread's main routine implements the standard command/data/status - * parts of a SCSI interaction. It and its subroutines are full of tests - * for pending signals/exceptions -- all this polling is necessary since - * the kernel has no setjmp/longjmp equivalents. (Maybe this is an - * indication that the driver really wants to be running in userspace.) - * An important point is that so long as the thread is alive it keeps an - * open reference to the backing file. This will prevent unmounting - * the backing file's underlying filesystem and could cause problems - * during system shutdown, for example. To prevent such problems, the - * thread catches INT, TERM, and KILL signals and converts them into - * an EXIT exception. - * - * In normal operation the main thread is started during the gadget's - * fsg_bind() callback and stopped during fsg_unbind(). But it can also - * exit when it receives a signal, and there's no point leaving the - * gadget running when the thread is dead. So just before the thread - * exits, it deregisters the gadget driver. This makes things a little - * tricky: The driver is deregistered at two places, and the exiting - * thread can indirectly call fsg_unbind() which in turn can tell the - * thread to exit. The first problem is resolved through the use of the - * REGISTERED atomic bitflag; the driver will only be deregistered once. - * The second problem is resolved by having fsg_unbind() check - * fsg->state; it won't try to stop the thread if the state is already - * FSG_STATE_TERMINATED. - * - * To provide maximum throughput, the driver uses a circular pipeline of - * buffer heads (struct fsg_buffhd). In principle the pipeline can be - * arbitrarily long; in practice the benefits don't justify having more - * than 2 stages (i.e., double buffering). But it helps to think of the - * pipeline as being a long one. Each buffer head contains a bulk-in and - * a bulk-out request pointer (since the buffer can be used for both - * output and input -- directions always are given from the host's - * point of view) as well as a pointer to the buffer and various state - * variables. - * - * Use of the pipeline follows a simple protocol. There is a variable - * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. - * At any time that buffer head may still be in use from an earlier - * request, so each buffer head has a state variable indicating whether - * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the - * buffer head to be EMPTY, filling the buffer either by file I/O or by - * USB I/O (during which the buffer head is BUSY), and marking the buffer - * head FULL when the I/O is complete. Then the buffer will be emptied - * (again possibly by USB I/O, during which it is marked BUSY) and - * finally marked EMPTY again (possibly by a completion routine). - * - * A module parameter tells the driver to avoid stalling the bulk - * endpoints wherever the transport specification allows. This is - * necessary for some UDCs like the SuperH, which cannot reliably clear a - * halt on a bulk endpoint. However, under certain circumstances the - * Bulk-only specification requires a stall. In such cases the driver - * will halt the endpoint and set a flag indicating that it should clear - * the halt in software during the next device reset. Hopefully this - * will permit everything to work correctly. Furthermore, although the - * specification allows the bulk-out endpoint to halt when the host sends - * too much data, implementing this would cause an unavoidable race. - * The driver will always use the "no-stall" approach for OUT transfers. - * - * One subtle point concerns sending status-stage responses for ep0 - * requests. Some of these requests, such as device reset, can involve - * interrupting an ongoing file I/O operation, which might take an - * arbitrarily long time. During that delay the host might give up on - * the original ep0 request and issue a new one. When that happens the - * driver should not notify the host about completion of the original - * request, as the host will no longer be waiting for it. So the driver - * assigns to each ep0 request a unique tag, and it keeps track of the - * tag value of the request associated with a long-running exception - * (device-reset, interface-change, or configuration-change). When the - * exception handler is finished, the status-stage response is submitted - * only if the current ep0 request tag is equal to the exception request - * tag. Thus only the most recently received ep0 request will get a - * status-stage response. - * - * Warning: This driver source file is too long. It ought to be split up - * into a header file plus about 3 separate .c files, to handle the details - * of the Gadget, USB Mass Storage, and SCSI protocols. - */ - - -/* #define VERBOSE_DEBUG */ -/* #define DUMP_MSGS */ - - -#include <linux/blkdev.h> -#include <linux/completion.h> -#include <linux/dcache.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/fcntl.h> -#include <linux/file.h> -#include <linux/fs.h> -#include <linux/kref.h> -#include <linux/kthread.h> -#include <linux/limits.h> -#include <linux/module.h> -#include <linux/rwsem.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/freezer.h> -#include <linux/utsname.h> - -#include <linux/usb/composite.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> - -#include "gadget_chips.h" - -#define DRIVER_DESC "File-backed Storage Gadget" -#define DRIVER_NAME "g_file_storage" -#define DRIVER_VERSION "1 September 2010" - -static char fsg_string_manufacturer[64]; -static const char fsg_string_product[] = DRIVER_DESC; -static const char fsg_string_config[] = "Self-powered"; -static const char fsg_string_interface[] = "Mass Storage"; - - -#include "storage_common.c" - - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Alan Stern"); -MODULE_LICENSE("Dual BSD/GPL"); - -/* - * This driver assumes self-powered hardware and has no way for users to - * trigger remote wakeup. It uses autoconfiguration to select endpoints - * and endpoint addresses. - */ - - -/*-------------------------------------------------------------------------*/ - - -/* Encapsulate the module parameter settings */ - -static struct { - char *file[FSG_MAX_LUNS]; - char *serial; - bool ro[FSG_MAX_LUNS]; - bool nofua[FSG_MAX_LUNS]; - unsigned int num_filenames; - unsigned int num_ros; - unsigned int num_nofuas; - unsigned int nluns; - - bool removable; - bool can_stall; - bool cdrom; - - char *transport_parm; - char *protocol_parm; - unsigned short vendor; - unsigned short product; - unsigned short release; - unsigned int buflen; - - int transport_type; - char *transport_name; - int protocol_type; - char *protocol_name; - -} mod_data = { // Default values - .transport_parm = "BBB", - .protocol_parm = "SCSI", - .removable = 0, - .can_stall = 1, - .cdrom = 0, - .vendor = FSG_VENDOR_ID, - .product = FSG_PRODUCT_ID, - .release = 0xffff, // Use controller chip type - .buflen = 16384, - }; - - -module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, - S_IRUGO); -MODULE_PARM_DESC(file, "names of backing files or devices"); - -module_param_named(serial, mod_data.serial, charp, S_IRUGO); -MODULE_PARM_DESC(serial, "USB serial number"); - -module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); -MODULE_PARM_DESC(ro, "true to force read-only"); - -module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, - S_IRUGO); -MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); - -module_param_named(luns, mod_data.nluns, uint, S_IRUGO); -MODULE_PARM_DESC(luns, "number of LUNs"); - -module_param_named(removable, mod_data.removable, bool, S_IRUGO); -MODULE_PARM_DESC(removable, "true to simulate removable media"); - -module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); -MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); - -module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); -MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); - -/* In the non-TEST version, only the module parameters listed above - * are available. */ -#ifdef CONFIG_USB_FILE_STORAGE_TEST - -module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); -MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); - -module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); -MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " - "8070, or SCSI)"); - -module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); -MODULE_PARM_DESC(vendor, "USB Vendor ID"); - -module_param_named(product, mod_data.product, ushort, S_IRUGO); -MODULE_PARM_DESC(product, "USB Product ID"); - -module_param_named(release, mod_data.release, ushort, S_IRUGO); -MODULE_PARM_DESC(release, "USB release number"); - -module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); -MODULE_PARM_DESC(buflen, "I/O buffer size"); - -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -/* - * These definitions will permit the compiler to avoid generating code for - * parts of the driver that aren't used in the non-TEST version. Even gcc - * can recognize when a test of a constant expression yields a dead code - * path. - */ - -#ifdef CONFIG_USB_FILE_STORAGE_TEST - -#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) -#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) -#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) - -#else - -#define transport_is_bbb() 1 -#define transport_is_cbi() 0 -#define protocol_is_scsi() 1 - -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -/*-------------------------------------------------------------------------*/ - - -struct fsg_dev { - /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ - spinlock_t lock; - struct usb_gadget *gadget; - - /* filesem protects: backing files in use */ - struct rw_semaphore filesem; - - /* reference counting: wait until all LUNs are released */ - struct kref ref; - - struct usb_ep *ep0; // Handy copy of gadget->ep0 - struct usb_request *ep0req; // For control responses - unsigned int ep0_req_tag; - const char *ep0req_name; - - struct usb_request *intreq; // For interrupt responses - int intreq_busy; - struct fsg_buffhd *intr_buffhd; - - unsigned int bulk_out_maxpacket; - enum fsg_state state; // For exception handling - unsigned int exception_req_tag; - - u8 config, new_config; - - unsigned int running : 1; - unsigned int bulk_in_enabled : 1; - unsigned int bulk_out_enabled : 1; - unsigned int intr_in_enabled : 1; - unsigned int phase_error : 1; - unsigned int short_packet_received : 1; - unsigned int bad_lun_okay : 1; - - unsigned long atomic_bitflags; -#define REGISTERED 0 -#define IGNORE_BULK_OUT 1 -#define SUSPENDED 2 - - struct usb_ep *bulk_in; - struct usb_ep *bulk_out; - struct usb_ep *intr_in; - - struct fsg_buffhd *next_buffhd_to_fill; - struct fsg_buffhd *next_buffhd_to_drain; - - int thread_wakeup_needed; - struct completion thread_notifier; - struct task_struct *thread_task; - - int cmnd_size; - u8 cmnd[MAX_COMMAND_SIZE]; - enum data_direction data_dir; - u32 data_size; - u32 data_size_from_cmnd; - u32 tag; - unsigned int lun; - u32 residue; - u32 usb_amount_left; - - /* The CB protocol offers no way for a host to know when a command - * has completed. As a result the next command may arrive early, - * and we will still have to handle it. For that reason we need - * a buffer to store new commands when using CB (or CBI, which - * does not oblige a host to wait for command completion either). */ - int cbbuf_cmnd_size; - u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; - - unsigned int nluns; - struct fsg_lun *luns; - struct fsg_lun *curlun; - /* Must be the last entry */ - struct fsg_buffhd buffhds[]; -}; - -typedef void (*fsg_routine_t)(struct fsg_dev *); - -static int exception_in_progress(struct fsg_dev *fsg) -{ - return (fsg->state > FSG_STATE_IDLE); -} - -/* Make bulk-out requests be divisible by the maxpacket size */ -static void set_bulk_out_req_length(struct fsg_dev *fsg, - struct fsg_buffhd *bh, unsigned int length) -{ - unsigned int rem; - - bh->bulk_out_intended_length = length; - rem = length % fsg->bulk_out_maxpacket; - if (rem > 0) - length += fsg->bulk_out_maxpacket - rem; - bh->outreq->length = length; -} - -static struct fsg_dev *the_fsg; -static struct usb_gadget_driver fsg_driver; - - -/*-------------------------------------------------------------------------*/ - -static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) -{ - const char *name; - - if (ep == fsg->bulk_in) - name = "bulk-in"; - else if (ep == fsg->bulk_out) - name = "bulk-out"; - else - name = ep->name; - DBG(fsg, "%s set halt\n", name); - return usb_ep_set_halt(ep); -} - - -/*-------------------------------------------------------------------------*/ - -/* - * DESCRIPTORS ... most are static, but strings and (full) configuration - * descriptors are built on demand. Also the (static) config and interface - * descriptors are adjusted during fsg_bind(). - */ - -/* There is only one configuration. */ -#define CONFIG_VALUE 1 - -static struct usb_device_descriptor -device_desc = { - .bLength = sizeof device_desc, - .bDescriptorType = USB_DT_DEVICE, - - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PER_INTERFACE, - - /* The next three values can be overridden by module parameters */ - .idVendor = cpu_to_le16(FSG_VENDOR_ID), - .idProduct = cpu_to_le16(FSG_PRODUCT_ID), - .bcdDevice = cpu_to_le16(0xffff), - - .iManufacturer = FSG_STRING_MANUFACTURER, - .iProduct = FSG_STRING_PRODUCT, - .iSerialNumber = FSG_STRING_SERIAL, - .bNumConfigurations = 1, -}; - -static struct usb_config_descriptor -config_desc = { - .bLength = sizeof config_desc, - .bDescriptorType = USB_DT_CONFIG, - - /* wTotalLength computed by usb_gadget_config_buf() */ - .bNumInterfaces = 1, - .bConfigurationValue = CONFIG_VALUE, - .iConfiguration = FSG_STRING_CONFIG, - .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -}; - - -static struct usb_qualifier_descriptor -dev_qualifier = { - .bLength = sizeof dev_qualifier, - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PER_INTERFACE, - - .bNumConfigurations = 1, -}; - -static int populate_bos(struct fsg_dev *fsg, u8 *buf) -{ - memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); - buf += USB_DT_BOS_SIZE; - - memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); - buf += USB_DT_USB_EXT_CAP_SIZE; - - memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); - - return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE - + USB_DT_USB_EXT_CAP_SIZE; -} - -/* - * Config descriptors must agree with the code that sets configurations - * and with code managing interfaces and their altsettings. They must - * also handle different speeds and other-speed requests. - */ -static int populate_config_buf(struct usb_gadget *gadget, - u8 *buf, u8 type, unsigned index) -{ - enum usb_device_speed speed = gadget->speed; - int len; - const struct usb_descriptor_header **function; - - if (index > 0) - return -EINVAL; - - if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) - speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; - function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH - ? (const struct usb_descriptor_header **)fsg_hs_function - : (const struct usb_descriptor_header **)fsg_fs_function; - - /* for now, don't advertise srp-only devices */ - if (!gadget_is_otg(gadget)) - function++; - - len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); - ((struct usb_config_descriptor *) buf)->bDescriptorType = type; - return len; -} - - -/*-------------------------------------------------------------------------*/ - -/* These routines may be called in process context or in_irq */ - -/* Caller must hold fsg->lock */ -static void wakeup_thread(struct fsg_dev *fsg) -{ - /* Tell the main thread that something has happened */ - fsg->thread_wakeup_needed = 1; - if (fsg->thread_task) - wake_up_process(fsg->thread_task); -} - - -static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) -{ - unsigned long flags; - - /* Do nothing if a higher-priority exception is already in progress. - * If a lower-or-equal priority exception is in progress, preempt it - * and notify the main thread by sending it a signal. */ - spin_lock_irqsave(&fsg->lock, flags); - if (fsg->state <= new_state) { - fsg->exception_req_tag = fsg->ep0_req_tag; - fsg->state = new_state; - if (fsg->thread_task) - send_sig_info(SIGUSR1, SEND_SIG_FORCED, - fsg->thread_task); - } - spin_unlock_irqrestore(&fsg->lock, flags); -} - - -/*-------------------------------------------------------------------------*/ - -/* The disconnect callback and ep0 routines. These always run in_irq, - * except that ep0_queue() is called in the main thread to acknowledge - * completion of various requests: set config, set interface, and - * Bulk-only device reset. */ - -static void fsg_disconnect(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - - DBG(fsg, "disconnect or port reset\n"); - raise_exception(fsg, FSG_STATE_DISCONNECT); -} - - -static int ep0_queue(struct fsg_dev *fsg) -{ - int rc; - - rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); - if (rc != 0 && rc != -ESHUTDOWN) { - - /* We can't do much more than wait for a reset */ - WARNING(fsg, "error in submission: %s --> %d\n", - fsg->ep0->name, rc); - } - return rc; -} - -static void ep0_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - - if (req->actual > 0) - dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); - if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - if (req->status == 0 && req->context) - ((fsg_routine_t) (req->context))(fsg); -} - - -/*-------------------------------------------------------------------------*/ - -/* Bulk and interrupt endpoint completion handlers. - * These always run in_irq. */ - -static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&fsg->lock); - bh->inreq_busy = 0; - bh->state = BUF_STATE_EMPTY; - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - -static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - dump_msg(fsg, "bulk-out", req->buf, req->actual); - if (req->status || req->actual != bh->bulk_out_intended_length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, - bh->bulk_out_intended_length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&fsg->lock); - bh->outreq_busy = 0; - bh->state = BUF_STATE_FULL; - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - - -#ifdef CONFIG_USB_FILE_STORAGE_TEST -static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&fsg->lock); - fsg->intreq_busy = 0; - bh->state = BUF_STATE_EMPTY; - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - -#else -static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -{} -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -/*-------------------------------------------------------------------------*/ - -/* Ep0 class-specific handlers. These always run in_irq. */ - -#ifdef CONFIG_USB_FILE_STORAGE_TEST -static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct usb_request *req = fsg->ep0req; - static u8 cbi_reset_cmnd[6] = { - SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; - - /* Error in command transfer? */ - if (req->status || req->length != req->actual || - req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { - - /* Not all controllers allow a protocol stall after - * receiving control-out data, but we'll try anyway. */ - fsg_set_halt(fsg, fsg->ep0); - return; // Wait for reset - } - - /* Is it the special reset command? */ - if (req->actual >= sizeof cbi_reset_cmnd && - memcmp(req->buf, cbi_reset_cmnd, - sizeof cbi_reset_cmnd) == 0) { - - /* Raise an exception to stop the current operation - * and reinitialize our state. */ - DBG(fsg, "cbi reset request\n"); - raise_exception(fsg, FSG_STATE_RESET); - return; - } - - VDBG(fsg, "CB[I] accept device-specific command\n"); - spin_lock(&fsg->lock); - - /* Save the command for later */ - if (fsg->cbbuf_cmnd_size) - WARNING(fsg, "CB[I] overwriting previous command\n"); - fsg->cbbuf_cmnd_size = req->actual; - memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); - - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - -#else -static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{} -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -static int class_setup_req(struct fsg_dev *fsg, - const struct usb_ctrlrequest *ctrl) -{ - struct usb_request *req = fsg->ep0req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - if (!fsg->config) - return value; - - /* Handle Bulk-only class-specific requests */ - if (transport_is_bbb()) { - switch (ctrl->bRequest) { - - case US_BULK_RESET_REQUEST: - if (ctrl->bRequestType != (USB_DIR_OUT | - USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != 0 || w_value != 0 || w_length != 0) { - value = -EDOM; - break; - } - - /* Raise an exception to stop the current operation - * and reinitialize our state. */ - DBG(fsg, "bulk reset request\n"); - raise_exception(fsg, FSG_STATE_RESET); - value = DELAYED_STATUS; - break; - - case US_BULK_GET_MAX_LUN: - if (ctrl->bRequestType != (USB_DIR_IN | - USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != 0 || w_value != 0 || w_length != 1) { - value = -EDOM; - break; - } - VDBG(fsg, "get max LUN\n"); - *(u8 *) req->buf = fsg->nluns - 1; - value = 1; - break; - } - } - - /* Handle CBI class-specific requests */ - else { - switch (ctrl->bRequest) { - - case USB_CBI_ADSC_REQUEST: - if (ctrl->bRequestType != (USB_DIR_OUT | - USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != 0 || w_value != 0) { - value = -EDOM; - break; - } - if (w_length > MAX_COMMAND_SIZE) { - value = -EOVERFLOW; - break; - } - value = w_length; - fsg->ep0req->context = received_cbi_adsc; - break; - } - } - - if (value == -EOPNOTSUPP) - VDBG(fsg, - "unknown class-specific control req " - "%02x.%02x v%04x i%04x l%u\n", - ctrl->bRequestType, ctrl->bRequest, - le16_to_cpu(ctrl->wValue), w_index, w_length); - return value; -} - - -/*-------------------------------------------------------------------------*/ - -/* Ep0 standard request handlers. These always run in_irq. */ - -static int standard_setup_req(struct fsg_dev *fsg, - const struct usb_ctrlrequest *ctrl) -{ - struct usb_request *req = fsg->ep0req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - - /* Usually this just stores reply data in the pre-allocated ep0 buffer, - * but config change events will also reconfigure hardware. */ - switch (ctrl->bRequest) { - - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | - USB_RECIP_DEVICE)) - break; - switch (w_value >> 8) { - - case USB_DT_DEVICE: - VDBG(fsg, "get device descriptor\n"); - device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; - value = sizeof device_desc; - memcpy(req->buf, &device_desc, value); - break; - case USB_DT_DEVICE_QUALIFIER: - VDBG(fsg, "get device qualifier\n"); - if (!gadget_is_dualspeed(fsg->gadget) || - fsg->gadget->speed == USB_SPEED_SUPER) - break; - /* - * Assume ep0 uses the same maxpacket value for both - * speeds - */ - dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; - value = sizeof dev_qualifier; - memcpy(req->buf, &dev_qualifier, value); - break; - - case USB_DT_OTHER_SPEED_CONFIG: - VDBG(fsg, "get other-speed config descriptor\n"); - if (!gadget_is_dualspeed(fsg->gadget) || - fsg->gadget->speed == USB_SPEED_SUPER) - break; - goto get_config; - case USB_DT_CONFIG: - VDBG(fsg, "get configuration descriptor\n"); -get_config: - value = populate_config_buf(fsg->gadget, - req->buf, - w_value >> 8, - w_value & 0xff); - break; - - case USB_DT_STRING: - VDBG(fsg, "get string descriptor\n"); - - /* wIndex == language code */ - value = usb_gadget_get_string(&fsg_stringtab, - w_value & 0xff, req->buf); - break; - - case USB_DT_BOS: - VDBG(fsg, "get bos descriptor\n"); - - if (gadget_is_superspeed(fsg->gadget)) - value = populate_bos(fsg, req->buf); - break; - } - - break; - - /* One config, two speeds */ - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_DEVICE)) - break; - VDBG(fsg, "set configuration\n"); - if (w_value == CONFIG_VALUE || w_value == 0) { - fsg->new_config = w_value; - - /* Raise an exception to wipe out previous transaction - * state (queued bufs, etc) and set the new config. */ - raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); - value = DELAYED_STATUS; - } - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | - USB_RECIP_DEVICE)) - break; - VDBG(fsg, "get configuration\n"); - *(u8 *) req->buf = fsg->config; - value = 1; - break; - - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | - USB_RECIP_INTERFACE)) - break; - if (fsg->config && w_index == 0) { - - /* Raise an exception to wipe out previous transaction - * state (queued bufs, etc) and install the new - * interface altsetting. */ - raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); - value = DELAYED_STATUS; - } - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | - USB_RECIP_INTERFACE)) - break; - if (!fsg->config) - break; - if (w_index != 0) { - value = -EDOM; - break; - } - VDBG(fsg, "get interface\n"); - *(u8 *) req->buf = 0; - value = 1; - break; - - default: - VDBG(fsg, - "unknown control req %02x.%02x v%04x i%04x l%u\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, le16_to_cpu(ctrl->wLength)); - } - - return value; -} - - -static int fsg_setup(struct usb_gadget *gadget, - const struct usb_ctrlrequest *ctrl) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - int rc; - int w_length = le16_to_cpu(ctrl->wLength); - - ++fsg->ep0_req_tag; // Record arrival of a new request - fsg->ep0req->context = NULL; - fsg->ep0req->length = 0; - dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); - - if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) - rc = class_setup_req(fsg, ctrl); - else - rc = standard_setup_req(fsg, ctrl); - - /* Respond with data/status or defer until later? */ - if (rc >= 0 && rc != DELAYED_STATUS) { - rc = min(rc, w_length); - fsg->ep0req->length = rc; - fsg->ep0req->zero = rc < w_length; - fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? - "ep0-in" : "ep0-out"); - rc = ep0_queue(fsg); - } - - /* Device either stalls (rc < 0) or reports success */ - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -/* All the following routines run in process context */ - - -/* Use this for bulk or interrupt transfers, not ep0 */ -static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request *req, int *pbusy, - enum fsg_buffer_state *state) -{ - int rc; - - if (ep == fsg->bulk_in) - dump_msg(fsg, "bulk-in", req->buf, req->length); - else if (ep == fsg->intr_in) - dump_msg(fsg, "intr-in", req->buf, req->length); - - spin_lock_irq(&fsg->lock); - *pbusy = 1; - *state = BUF_STATE_BUSY; - spin_unlock_irq(&fsg->lock); - rc = usb_ep_queue(ep, req, GFP_KERNEL); - if (rc != 0) { - *pbusy = 0; - *state = BUF_STATE_EMPTY; - - /* We can't do much more than wait for a reset */ - - /* Note: currently the net2280 driver fails zero-length - * submissions if DMA is enabled. */ - if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && - req->length == 0)) - WARNING(fsg, "error in submission: %s --> %d\n", - ep->name, rc); - } -} - - -static int sleep_thread(struct fsg_dev *fsg) -{ - int rc = 0; - - /* Wait until a signal arrives or we are woken up */ - for (;;) { - try_to_freeze(); - set_current_state(TASK_INTERRUPTIBLE); - if (signal_pending(current)) { - rc = -EINTR; - break; - } - if (fsg->thread_wakeup_needed) - break; - schedule(); - } - __set_current_state(TASK_RUNNING); - fsg->thread_wakeup_needed = 0; - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static int do_read(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba; - struct fsg_buffhd *bh; - int rc; - u32 amount_left; - loff_t file_offset, file_offset_tmp; - unsigned int amount; - ssize_t nread; - - /* Get the starting Logical Block Address and check that it's - * not too big */ - if (fsg->cmnd[0] == READ_6) - lba = get_unaligned_be24(&fsg->cmnd[1]); - else { - lba = get_unaligned_be32(&fsg->cmnd[2]); - - /* We allow DPO (Disable Page Out = don't save data in the - * cache) and FUA (Force Unit Access = don't read from the - * cache), but we don't implement them. */ - if ((fsg->cmnd[1] & ~0x18) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - file_offset = ((loff_t) lba) << curlun->blkbits; - - /* Carry out the file reads */ - amount_left = fsg->data_size_from_cmnd; - if (unlikely(amount_left == 0)) - return -EIO; // No default reply - - for (;;) { - - /* Figure out how much we need to read: - * Try to read the remaining amount. - * But don't read more than the buffer size. - * And don't try to read past the end of the file. - */ - amount = min((unsigned int) amount_left, mod_data.buflen); - amount = min((loff_t) amount, - curlun->file_length - file_offset); - - /* Wait for the next buffer to become available */ - bh = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - /* If we were asked to read past the end of file, - * end with an empty buffer. */ - if (amount == 0) { - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - bh->inreq->length = 0; - bh->state = BUF_STATE_FULL; - break; - } - - /* Perform the read */ - file_offset_tmp = file_offset; - nread = vfs_read(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nread); - if (signal_pending(current)) - return -EINTR; - - if (nread < 0) { - LDBG(curlun, "error in file read: %d\n", - (int) nread); - nread = 0; - } else if (nread < amount) { - LDBG(curlun, "partial file read: %d/%u\n", - (int) nread, amount); - nread = round_down(nread, curlun->blksize); - } - file_offset += nread; - amount_left -= nread; - fsg->residue -= nread; - - /* Except at the end of the transfer, nread will be - * equal to the buffer size, which is divisible by the - * bulk-in maxpacket size. - */ - bh->inreq->length = nread; - bh->state = BUF_STATE_FULL; - - /* If an error occurred, report it and its position */ - if (nread < amount) { - curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - if (amount_left == 0) - break; // No more left to read - - /* Send this buffer and go read some more */ - bh->inreq->zero = 0; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - } - - return -EIO; // No default reply -} - - -/*-------------------------------------------------------------------------*/ - -static int do_write(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba; - struct fsg_buffhd *bh; - int get_some_more; - u32 amount_left_to_req, amount_left_to_write; - loff_t usb_offset, file_offset, file_offset_tmp; - unsigned int amount; - ssize_t nwritten; - int rc; - - if (curlun->ro) { - curlun->sense_data = SS_WRITE_PROTECTED; - return -EINVAL; - } - spin_lock(&curlun->filp->f_lock); - curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait - spin_unlock(&curlun->filp->f_lock); - - /* Get the starting Logical Block Address and check that it's - * not too big */ - if (fsg->cmnd[0] == WRITE_6) - lba = get_unaligned_be24(&fsg->cmnd[1]); - else { - lba = get_unaligned_be32(&fsg->cmnd[2]); - - /* We allow DPO (Disable Page Out = don't save data in the - * cache) and FUA (Force Unit Access = write directly to the - * medium). We don't implement DPO; we implement FUA by - * performing synchronous output. */ - if ((fsg->cmnd[1] & ~0x18) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - /* FUA */ - if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { - spin_lock(&curlun->filp->f_lock); - curlun->filp->f_flags |= O_DSYNC; - spin_unlock(&curlun->filp->f_lock); - } - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - /* Carry out the file writes */ - get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; - amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; - - while (amount_left_to_write > 0) { - - /* Queue a request for more data from the host */ - bh = fsg->next_buffhd_to_fill; - if (bh->state == BUF_STATE_EMPTY && get_some_more) { - - /* Figure out how much we want to get: - * Try to get the remaining amount, - * but not more than the buffer size. - */ - amount = min(amount_left_to_req, mod_data.buflen); - - /* Beyond the end of the backing file? */ - if (usb_offset >= curlun->file_length) { - get_some_more = 0; - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> curlun->blkbits; - curlun->info_valid = 1; - continue; - } - - /* Get the next buffer */ - usb_offset += amount; - fsg->usb_amount_left -= amount; - amount_left_to_req -= amount; - if (amount_left_to_req == 0) - get_some_more = 0; - - /* Except at the end of the transfer, amount will be - * equal to the buffer size, which is divisible by - * the bulk-out maxpacket size. - */ - set_bulk_out_req_length(fsg, bh, amount); - start_transfer(fsg, fsg->bulk_out, bh->outreq, - &bh->outreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - continue; - } - - /* Write the received data to the backing file */ - bh = fsg->next_buffhd_to_drain; - if (bh->state == BUF_STATE_EMPTY && !get_some_more) - break; // We stopped early - if (bh->state == BUF_STATE_FULL) { - smp_rmb(); - fsg->next_buffhd_to_drain = bh->next; - bh->state = BUF_STATE_EMPTY; - - /* Did something go wrong with the transfer? */ - if (bh->outreq->status != 0) { - curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - amount = bh->outreq->actual; - if (curlun->file_length - file_offset < amount) { - LERROR(curlun, - "write %u @ %llu beyond end %llu\n", - amount, (unsigned long long) file_offset, - (unsigned long long) curlun->file_length); - amount = curlun->file_length - file_offset; - } - - /* Don't accept excess data. The spec doesn't say - * what to do in this case. We'll ignore the error. - */ - amount = min(amount, bh->bulk_out_intended_length); - - /* Don't write a partial block */ - amount = round_down(amount, curlun->blksize); - if (amount == 0) - goto empty_write; - - /* Perform the write */ - file_offset_tmp = file_offset; - nwritten = vfs_write(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nwritten); - if (signal_pending(current)) - return -EINTR; // Interrupted! - - if (nwritten < 0) { - LDBG(curlun, "error in file write: %d\n", - (int) nwritten); - nwritten = 0; - } else if (nwritten < amount) { - LDBG(curlun, "partial file write: %d/%u\n", - (int) nwritten, amount); - nwritten = round_down(nwritten, curlun->blksize); - } - file_offset += nwritten; - amount_left_to_write -= nwritten; - fsg->residue -= nwritten; - - /* If an error occurred, report it and its position */ - if (nwritten < amount) { - curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - empty_write: - /* Did the host decide to stop early? */ - if (bh->outreq->actual < bh->bulk_out_intended_length) { - fsg->short_packet_received = 1; - break; - } - continue; - } - - /* Wait for something to happen */ - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - return -EIO; // No default reply -} - - -/*-------------------------------------------------------------------------*/ - -static int do_synchronize_cache(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - int rc; - - /* We ignore the requested LBA and write out all file's - * dirty data buffers. */ - rc = fsg_lun_fsync_sub(curlun); - if (rc) - curlun->sense_data = SS_WRITE_ERROR; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static void invalidate_sub(struct fsg_lun *curlun) -{ - struct file *filp = curlun->filp; - struct inode *inode = filp->f_path.dentry->d_inode; - unsigned long rc; - - rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); - VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); -} - -static int do_verify(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba; - u32 verification_length; - struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; - loff_t file_offset, file_offset_tmp; - u32 amount_left; - unsigned int amount; - ssize_t nread; - - /* Get the starting Logical Block Address and check that it's - * not too big */ - lba = get_unaligned_be32(&fsg->cmnd[2]); - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - /* We allow DPO (Disable Page Out = don't save data in the - * cache) but we don't implement it. */ - if ((fsg->cmnd[1] & ~0x10) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - verification_length = get_unaligned_be16(&fsg->cmnd[7]); - if (unlikely(verification_length == 0)) - return -EIO; // No default reply - - /* Prepare to carry out the file verify */ - amount_left = verification_length << curlun->blkbits; - file_offset = ((loff_t) lba) << curlun->blkbits; - - /* Write out all the dirty buffers before invalidating them */ - fsg_lun_fsync_sub(curlun); - if (signal_pending(current)) - return -EINTR; - - invalidate_sub(curlun); - if (signal_pending(current)) - return -EINTR; - - /* Just try to read the requested blocks */ - while (amount_left > 0) { - - /* Figure out how much we need to read: - * Try to read the remaining amount, but not more than - * the buffer size. - * And don't try to read past the end of the file. - */ - amount = min((unsigned int) amount_left, mod_data.buflen); - amount = min((loff_t) amount, - curlun->file_length - file_offset); - if (amount == 0) { - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - /* Perform the read */ - file_offset_tmp = file_offset; - nread = vfs_read(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nread); - if (signal_pending(current)) - return -EINTR; - - if (nread < 0) { - LDBG(curlun, "error in file verify: %d\n", - (int) nread); - nread = 0; - } else if (nread < amount) { - LDBG(curlun, "partial file verify: %d/%u\n", - (int) nread, amount); - nread = round_down(nread, curlun->blksize); - } - if (nread == 0) { - curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - file_offset += nread; - amount_left -= nread; - } - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - u8 *buf = (u8 *) bh->buf; - - static char vendor_id[] = "Linux "; - static char product_disk_id[] = "File-Stor Gadget"; - static char product_cdrom_id[] = "File-CD Gadget "; - - if (!fsg->curlun) { // Unsupported LUNs are okay - fsg->bad_lun_okay = 1; - memset(buf, 0, 36); - buf[0] = 0x7f; // Unsupported, no device-type - buf[4] = 31; // Additional length - return 36; - } - - memset(buf, 0, 8); - buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); - if (mod_data.removable) - buf[1] = 0x80; - buf[2] = 2; // ANSI SCSI level 2 - buf[3] = 2; // SCSI-2 INQUIRY data format - buf[4] = 31; // Additional length - // No special options - sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, - (mod_data.cdrom ? product_cdrom_id : - product_disk_id), - mod_data.release); - return 36; -} - - -static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - u8 *buf = (u8 *) bh->buf; - u32 sd, sdinfo; - int valid; - - /* - * From the SCSI-2 spec., section 7.9 (Unit attention condition): - * - * If a REQUEST SENSE command is received from an initiator - * with a pending unit attention condition (before the target - * generates the contingent allegiance condition), then the - * target shall either: - * a) report any pending sense data and preserve the unit - * attention condition on the logical unit, or, - * b) report the unit attention condition, may discard any - * pending sense data, and clear the unit attention - * condition on the logical unit for that initiator. - * - * FSG normally uses option a); enable this code to use option b). - */ -#if 0 - if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { - curlun->sense_data = curlun->unit_attention_data; - curlun->unit_attention_data = SS_NO_SENSE; - } -#endif - - if (!curlun) { // Unsupported LUNs are okay - fsg->bad_lun_okay = 1; - sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; - sdinfo = 0; - valid = 0; - } else { - sd = curlun->sense_data; - sdinfo = curlun->sense_data_info; - valid = curlun->info_valid << 7; - curlun->sense_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - - memset(buf, 0, 18); - buf[0] = valid | 0x70; // Valid, current error - buf[2] = SK(sd); - put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ - buf[7] = 18 - 8; // Additional sense length - buf[12] = ASC(sd); - buf[13] = ASCQ(sd); - return 18; -} - - -static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba = get_unaligned_be32(&fsg->cmnd[2]); - int pmi = fsg->cmnd[8]; - u8 *buf = (u8 *) bh->buf; - - /* Check the PMI and LBA fields */ - if (pmi > 1 || (pmi == 0 && lba != 0)) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); - /* Max logical block */ - put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ - return 8; -} - - -static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - int msf = fsg->cmnd[1] & 0x02; - u32 lba = get_unaligned_be32(&fsg->cmnd[2]); - u8 *buf = (u8 *) bh->buf; - - if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - memset(buf, 0, 8); - buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ - store_cdrom_address(&buf[4], msf, lba); - return 8; -} - - -static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - int msf = fsg->cmnd[1] & 0x02; - int start_track = fsg->cmnd[6]; - u8 *buf = (u8 *) bh->buf; - - if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ - start_track > 1) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - memset(buf, 0, 20); - buf[1] = (20-2); /* TOC data length */ - buf[2] = 1; /* First track number */ - buf[3] = 1; /* Last track number */ - buf[5] = 0x16; /* Data track, copying allowed */ - buf[6] = 0x01; /* Only track is number 1 */ - store_cdrom_address(&buf[8], msf, 0); - - buf[13] = 0x16; /* Lead-out track is data */ - buf[14] = 0xAA; /* Lead-out track number */ - store_cdrom_address(&buf[16], msf, curlun->num_sectors); - return 20; -} - - -static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - int mscmnd = fsg->cmnd[0]; - u8 *buf = (u8 *) bh->buf; - u8 *buf0 = buf; - int pc, page_code; - int changeable_values, all_pages; - int valid_page = 0; - int len, limit; - - if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - pc = fsg->cmnd[2] >> 6; - page_code = fsg->cmnd[2] & 0x3f; - if (pc == 3) { - curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; - return -EINVAL; - } - changeable_values = (pc == 1); - all_pages = (page_code == 0x3f); - - /* Write the mode parameter header. Fixed values are: default - * medium type, no cache control (DPOFUA), and no block descriptors. - * The only variable value is the WriteProtect bit. We will fill in - * the mode data length later. */ - memset(buf, 0, 8); - if (mscmnd == MODE_SENSE) { - buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA - buf += 4; - limit = 255; - } else { // MODE_SENSE_10 - buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA - buf += 8; - limit = 65535; // Should really be mod_data.buflen - } - - /* No block descriptors */ - - /* The mode pages, in numerical order. The only page we support - * is the Caching page. */ - if (page_code == 0x08 || all_pages) { - valid_page = 1; - buf[0] = 0x08; // Page code - buf[1] = 10; // Page length - memset(buf+2, 0, 10); // None of the fields are changeable - - if (!changeable_values) { - buf[2] = 0x04; // Write cache enable, - // Read cache not disabled - // No cache retention priorities - put_unaligned_be16(0xffff, &buf[4]); - /* Don't disable prefetch */ - /* Minimum prefetch = 0 */ - put_unaligned_be16(0xffff, &buf[8]); - /* Maximum prefetch */ - put_unaligned_be16(0xffff, &buf[10]); - /* Maximum prefetch ceiling */ - } - buf += 12; - } - - /* Check that a valid page was requested and the mode data length - * isn't too long. */ - len = buf - buf0; - if (!valid_page || len > limit) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - /* Store the mode data length */ - if (mscmnd == MODE_SENSE) - buf0[0] = len - 1; - else - put_unaligned_be16(len - 2, buf0); - return len; -} - - -static int do_start_stop(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - int loej, start; - - if (!mod_data.removable) { - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; - } - - // int immed = fsg->cmnd[1] & 0x01; - loej = fsg->cmnd[4] & 0x02; - start = fsg->cmnd[4] & 0x01; - -#ifdef CONFIG_USB_FILE_STORAGE_TEST - if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed - (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - if (!start) { - - /* Are we allowed to unload the media? */ - if (curlun->prevent_medium_removal) { - LDBG(curlun, "unload attempt prevented\n"); - curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; - return -EINVAL; - } - if (loej) { // Simulate an unload/eject - up_read(&fsg->filesem); - down_write(&fsg->filesem); - fsg_lun_close(curlun); - up_write(&fsg->filesem); - down_read(&fsg->filesem); - } - } else { - - /* Our emulation doesn't support mounting; the medium is - * available for use as soon as it is loaded. */ - if (!fsg_lun_is_open(curlun)) { - curlun->sense_data = SS_MEDIUM_NOT_PRESENT; - return -EINVAL; - } - } -#endif - return 0; -} - - -static int do_prevent_allow(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - int prevent; - - if (!mod_data.removable) { - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; - } - - prevent = fsg->cmnd[4] & 0x01; - if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - if (curlun->prevent_medium_removal && !prevent) - fsg_lun_fsync_sub(curlun); - curlun->prevent_medium_removal = prevent; - return 0; -} - - -static int do_read_format_capacities(struct fsg_dev *fsg, - struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - u8 *buf = (u8 *) bh->buf; - - buf[0] = buf[1] = buf[2] = 0; - buf[3] = 8; // Only the Current/Maximum Capacity Descriptor - buf += 4; - - put_unaligned_be32(curlun->num_sectors, &buf[0]); - /* Number of blocks */ - put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ - buf[4] = 0x02; /* Current capacity */ - return 12; -} - - -static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - - /* We don't support MODE SELECT */ - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; -} - - -/*-------------------------------------------------------------------------*/ - -static int halt_bulk_in_endpoint(struct fsg_dev *fsg) -{ - int rc; - - rc = fsg_set_halt(fsg, fsg->bulk_in); - if (rc == -EAGAIN) - VDBG(fsg, "delayed bulk-in endpoint halt\n"); - while (rc != 0) { - if (rc != -EAGAIN) { - WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); - rc = 0; - break; - } - - /* Wait for a short time and then try again */ - if (msleep_interruptible(100) != 0) - return -EINTR; - rc = usb_ep_set_halt(fsg->bulk_in); - } - return rc; -} - -static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) -{ - int rc; - - DBG(fsg, "bulk-in set wedge\n"); - rc = usb_ep_set_wedge(fsg->bulk_in); - if (rc == -EAGAIN) - VDBG(fsg, "delayed bulk-in endpoint wedge\n"); - while (rc != 0) { - if (rc != -EAGAIN) { - WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); - rc = 0; - break; - } - - /* Wait for a short time and then try again */ - if (msleep_interruptible(100) != 0) - return -EINTR; - rc = usb_ep_set_wedge(fsg->bulk_in); - } - return rc; -} - -static int throw_away_data(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh; - u32 amount; - int rc; - - while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || - fsg->usb_amount_left > 0) { - - /* Throw away the data in a filled buffer */ - if (bh->state == BUF_STATE_FULL) { - smp_rmb(); - bh->state = BUF_STATE_EMPTY; - fsg->next_buffhd_to_drain = bh->next; - - /* A short packet or an error ends everything */ - if (bh->outreq->actual < bh->bulk_out_intended_length || - bh->outreq->status != 0) { - raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); - return -EINTR; - } - continue; - } - - /* Try to submit another request if we need one */ - bh = fsg->next_buffhd_to_fill; - if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { - amount = min(fsg->usb_amount_left, - (u32) mod_data.buflen); - - /* Except at the end of the transfer, amount will be - * equal to the buffer size, which is divisible by - * the bulk-out maxpacket size. - */ - set_bulk_out_req_length(fsg, bh, amount); - start_transfer(fsg, fsg->bulk_out, bh->outreq, - &bh->outreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - fsg->usb_amount_left -= amount; - continue; - } - - /* Otherwise wait for something to happen */ - rc = sleep_thread(fsg); - if (rc) - return rc; - } - return 0; -} - - -static int finish_reply(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; - int rc = 0; - - switch (fsg->data_dir) { - case DATA_DIR_NONE: - break; // Nothing to send - - /* If we don't know whether the host wants to read or write, - * this must be CB or CBI with an unknown command. We mustn't - * try to send or receive any data. So stall both bulk pipes - * if we can and wait for a reset. */ - case DATA_DIR_UNKNOWN: - if (mod_data.can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - rc = halt_bulk_in_endpoint(fsg); - } - break; - - /* All but the last buffer of data must have already been sent */ - case DATA_DIR_TO_HOST: - if (fsg->data_size == 0) - ; // Nothing to send - - /* If there's no residue, simply send the last buffer */ - else if (fsg->residue == 0) { - bh->inreq->zero = 0; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - } - - /* There is a residue. For CB and CBI, simply mark the end - * of the data with a short packet. However, if we are - * allowed to stall, there was no data at all (residue == - * data_size), and the command failed (invalid LUN or - * sense data is set), then halt the bulk-in endpoint - * instead. */ - else if (!transport_is_bbb()) { - if (mod_data.can_stall && - fsg->residue == fsg->data_size && - (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { - bh->state = BUF_STATE_EMPTY; - rc = halt_bulk_in_endpoint(fsg); - } else { - bh->inreq->zero = 1; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - } - } - - /* - * For Bulk-only, mark the end of the data with a short - * packet. If we are allowed to stall, halt the bulk-in - * endpoint. (Note: This violates the Bulk-Only Transport - * specification, which requires us to pad the data if we - * don't halt the endpoint. Presumably nobody will mind.) - */ - else { - bh->inreq->zero = 1; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - if (mod_data.can_stall) - rc = halt_bulk_in_endpoint(fsg); - } - break; - - /* We have processed all we want from the data the host has sent. - * There may still be outstanding bulk-out requests. */ - case DATA_DIR_FROM_HOST: - if (fsg->residue == 0) - ; // Nothing to receive - - /* Did the host stop sending unexpectedly early? */ - else if (fsg->short_packet_received) { - raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); - rc = -EINTR; - } - - /* We haven't processed all the incoming data. Even though - * we may be allowed to stall, doing so would cause a race. - * The controller may already have ACK'ed all the remaining - * bulk-out packets, in which case the host wouldn't see a - * STALL. Not realizing the endpoint was halted, it wouldn't - * clear the halt -- leading to problems later on. */ -#if 0 - else if (mod_data.can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); - rc = -EINTR; - } -#endif - - /* We can't stall. Read in the excess data and throw it - * all away. */ - else - rc = throw_away_data(fsg); - break; - } - return rc; -} - - -static int send_status(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - struct fsg_buffhd *bh; - int rc; - u8 status = US_BULK_STAT_OK; - u32 sd, sdinfo = 0; - - /* Wait for the next buffer to become available */ - bh = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - if (curlun) { - sd = curlun->sense_data; - sdinfo = curlun->sense_data_info; - } else if (fsg->bad_lun_okay) - sd = SS_NO_SENSE; - else - sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; - - if (fsg->phase_error) { - DBG(fsg, "sending phase-error status\n"); - status = US_BULK_STAT_PHASE; - sd = SS_INVALID_COMMAND; - } else if (sd != SS_NO_SENSE) { - DBG(fsg, "sending command-failure status\n"); - status = US_BULK_STAT_FAIL; - VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" - " info x%x\n", - SK(sd), ASC(sd), ASCQ(sd), sdinfo); - } - - if (transport_is_bbb()) { - struct bulk_cs_wrap *csw = bh->buf; - - /* Store and send the Bulk-only CSW */ - csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); - csw->Tag = fsg->tag; - csw->Residue = cpu_to_le32(fsg->residue); - csw->Status = status; - - bh->inreq->length = US_BULK_CS_WRAP_LEN; - bh->inreq->zero = 0; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - - } else if (mod_data.transport_type == USB_PR_CB) { - - /* Control-Bulk transport has no status phase! */ - return 0; - - } else { // USB_PR_CBI - struct interrupt_data *buf = bh->buf; - - /* Store and send the Interrupt data. UFI sends the ASC - * and ASCQ bytes. Everything else sends a Type (which - * is always 0) and the status Value. */ - if (mod_data.protocol_type == USB_SC_UFI) { - buf->bType = ASC(sd); - buf->bValue = ASCQ(sd); - } else { - buf->bType = 0; - buf->bValue = status; - } - fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; - - fsg->intr_buffhd = bh; // Point to the right buffhd - fsg->intreq->buf = bh->inreq->buf; - fsg->intreq->context = bh; - start_transfer(fsg, fsg->intr_in, fsg->intreq, - &fsg->intreq_busy, &bh->state); - } - - fsg->next_buffhd_to_fill = bh->next; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -/* Check whether the command is properly formed and whether its data size - * and direction agree with the values we already have. */ -static int check_command(struct fsg_dev *fsg, int cmnd_size, - enum data_direction data_dir, unsigned int mask, - int needs_medium, const char *name) -{ - int i; - int lun = fsg->cmnd[1] >> 5; - static const char dirletter[4] = {'u', 'o', 'i', 'n'}; - char hdlen[20]; - struct fsg_lun *curlun; - - /* Adjust the expected cmnd_size for protocol encapsulation padding. - * Transparent SCSI doesn't pad. */ - if (protocol_is_scsi()) - ; - - /* There's some disagreement as to whether RBC pads commands or not. - * We'll play it safe and accept either form. */ - else if (mod_data.protocol_type == USB_SC_RBC) { - if (fsg->cmnd_size == 12) - cmnd_size = 12; - - /* All the other protocols pad to 12 bytes */ - } else - cmnd_size = 12; - - hdlen[0] = 0; - if (fsg->data_dir != DATA_DIR_UNKNOWN) - sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], - fsg->data_size); - VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", - name, cmnd_size, dirletter[(int) data_dir], - fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); - - /* We can't reply at all until we know the correct data direction - * and size. */ - if (fsg->data_size_from_cmnd == 0) - data_dir = DATA_DIR_NONE; - if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI - fsg->data_dir = data_dir; - fsg->data_size = fsg->data_size_from_cmnd; - - } else { // Bulk-only - if (fsg->data_size < fsg->data_size_from_cmnd) { - - /* Host data size < Device data size is a phase error. - * Carry out the command, but only transfer as much - * as we are allowed. */ - fsg->data_size_from_cmnd = fsg->data_size; - fsg->phase_error = 1; - } - } - fsg->residue = fsg->usb_amount_left = fsg->data_size; - - /* Conflicting data directions is a phase error */ - if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { - fsg->phase_error = 1; - return -EINVAL; - } - - /* Verify the length of the command itself */ - if (cmnd_size != fsg->cmnd_size) { - - /* Special case workaround: There are plenty of buggy SCSI - * implementations. Many have issues with cbw->Length - * field passing a wrong command size. For those cases we - * always try to work around the problem by using the length - * sent by the host side provided it is at least as large - * as the correct command length. - * Examples of such cases would be MS-Windows, which issues - * REQUEST SENSE with cbw->Length == 12 where it should - * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and - * REQUEST SENSE with cbw->Length == 10 where it should - * be 6 as well. - */ - if (cmnd_size <= fsg->cmnd_size) { - DBG(fsg, "%s is buggy! Expected length %d " - "but we got %d\n", name, - cmnd_size, fsg->cmnd_size); - cmnd_size = fsg->cmnd_size; - } else { - fsg->phase_error = 1; - return -EINVAL; - } - } - - /* Check that the LUN values are consistent */ - if (transport_is_bbb()) { - if (fsg->lun != lun) - DBG(fsg, "using LUN %d from CBW, " - "not LUN %d from CDB\n", - fsg->lun, lun); - } - - /* Check the LUN */ - curlun = fsg->curlun; - if (curlun) { - if (fsg->cmnd[0] != REQUEST_SENSE) { - curlun->sense_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - } else { - fsg->bad_lun_okay = 0; - - /* INQUIRY and REQUEST SENSE commands are explicitly allowed - * to use unsupported LUNs; all others may not. */ - if (fsg->cmnd[0] != INQUIRY && - fsg->cmnd[0] != REQUEST_SENSE) { - DBG(fsg, "unsupported LUN %d\n", fsg->lun); - return -EINVAL; - } - } - - /* If a unit attention condition exists, only INQUIRY and - * REQUEST SENSE commands are allowed; anything else must fail. */ - if (curlun && curlun->unit_attention_data != SS_NO_SENSE && - fsg->cmnd[0] != INQUIRY && - fsg->cmnd[0] != REQUEST_SENSE) { - curlun->sense_data = curlun->unit_attention_data; - curlun->unit_attention_data = SS_NO_SENSE; - return -EINVAL; - } - - /* Check that only command bytes listed in the mask are non-zero */ - fsg->cmnd[1] &= 0x1f; // Mask away the LUN - for (i = 1; i < cmnd_size; ++i) { - if (fsg->cmnd[i] && !(mask & (1 << i))) { - if (curlun) - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - } - - /* If the medium isn't mounted and the command needs to access - * it, return an error. */ - if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { - curlun->sense_data = SS_MEDIUM_NOT_PRESENT; - return -EINVAL; - } - - return 0; -} - -/* wrapper of check_command for data size in blocks handling */ -static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, - enum data_direction data_dir, unsigned int mask, - int needs_medium, const char *name) -{ - if (fsg->curlun) - fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; - return check_command(fsg, cmnd_size, data_dir, - mask, needs_medium, name); -} - -static int do_scsi_command(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh; - int rc; - int reply = -EINVAL; - int i; - static char unknown[16]; - - dump_cdb(fsg); - - /* Wait for the next buffer to become available for data or status */ - bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - fsg->phase_error = 0; - fsg->short_packet_received = 0; - - down_read(&fsg->filesem); // We're using the backing file - switch (fsg->cmnd[0]) { - - case INQUIRY: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, - (1<<4), 0, - "INQUIRY")) == 0) - reply = do_inquiry(fsg, bh); - break; - - case MODE_SELECT: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, - (1<<1) | (1<<4), 0, - "MODE SELECT(6)")) == 0) - reply = do_mode_select(fsg, bh); - break; - - case MODE_SELECT_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, - (1<<1) | (3<<7), 0, - "MODE SELECT(10)")) == 0) - reply = do_mode_select(fsg, bh); - break; - - case MODE_SENSE: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, - (1<<1) | (1<<2) | (1<<4), 0, - "MODE SENSE(6)")) == 0) - reply = do_mode_sense(fsg, bh); - break; - - case MODE_SENSE_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (1<<1) | (1<<2) | (3<<7), 0, - "MODE SENSE(10)")) == 0) - reply = do_mode_sense(fsg, bh); - break; - - case ALLOW_MEDIUM_REMOVAL: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 6, DATA_DIR_NONE, - (1<<4), 0, - "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) - reply = do_prevent_allow(fsg); - break; - - case READ_6: - i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0) ? 256 : i; - if ((reply = check_command_size_in_blocks(fsg, 6, - DATA_DIR_TO_HOST, - (7<<1) | (1<<4), 1, - "READ(6)")) == 0) - reply = do_read(fsg); - break; - - case READ_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command_size_in_blocks(fsg, 10, - DATA_DIR_TO_HOST, - (1<<1) | (0xf<<2) | (3<<7), 1, - "READ(10)")) == 0) - reply = do_read(fsg); - break; - - case READ_12: - fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); - if ((reply = check_command_size_in_blocks(fsg, 12, - DATA_DIR_TO_HOST, - (1<<1) | (0xf<<2) | (0xf<<6), 1, - "READ(12)")) == 0) - reply = do_read(fsg); - break; - - case READ_CAPACITY: - fsg->data_size_from_cmnd = 8; - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (0xf<<2) | (1<<8), 1, - "READ CAPACITY")) == 0) - reply = do_read_capacity(fsg, bh); - break; - - case READ_HEADER: - if (!mod_data.cdrom) - goto unknown_cmnd; - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (3<<7) | (0x1f<<1), 1, - "READ HEADER")) == 0) - reply = do_read_header(fsg, bh); - break; - - case READ_TOC: - if (!mod_data.cdrom) - goto unknown_cmnd; - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (7<<6) | (1<<1), 1, - "READ TOC")) == 0) - reply = do_read_toc(fsg, bh); - break; - - case READ_FORMAT_CAPACITIES: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (3<<7), 1, - "READ FORMAT CAPACITIES")) == 0) - reply = do_read_format_capacities(fsg, bh); - break; - - case REQUEST_SENSE: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, - (1<<4), 0, - "REQUEST SENSE")) == 0) - reply = do_request_sense(fsg, bh); - break; - - case START_STOP: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 6, DATA_DIR_NONE, - (1<<1) | (1<<4), 0, - "START-STOP UNIT")) == 0) - reply = do_start_stop(fsg); - break; - - case SYNCHRONIZE_CACHE: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 10, DATA_DIR_NONE, - (0xf<<2) | (3<<7), 1, - "SYNCHRONIZE CACHE")) == 0) - reply = do_synchronize_cache(fsg); - break; - - case TEST_UNIT_READY: - fsg->data_size_from_cmnd = 0; - reply = check_command(fsg, 6, DATA_DIR_NONE, - 0, 1, - "TEST UNIT READY"); - break; - - /* Although optional, this command is used by MS-Windows. We - * support a minimal version: BytChk must be 0. */ - case VERIFY: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 10, DATA_DIR_NONE, - (1<<1) | (0xf<<2) | (3<<7), 1, - "VERIFY")) == 0) - reply = do_verify(fsg); - break; - - case WRITE_6: - i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0) ? 256 : i; - if ((reply = check_command_size_in_blocks(fsg, 6, - DATA_DIR_FROM_HOST, - (7<<1) | (1<<4), 1, - "WRITE(6)")) == 0) - reply = do_write(fsg); - break; - - case WRITE_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command_size_in_blocks(fsg, 10, - DATA_DIR_FROM_HOST, - (1<<1) | (0xf<<2) | (3<<7), 1, - "WRITE(10)")) == 0) - reply = do_write(fsg); - break; - - case WRITE_12: - fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); - if ((reply = check_command_size_in_blocks(fsg, 12, - DATA_DIR_FROM_HOST, - (1<<1) | (0xf<<2) | (0xf<<6), 1, - "WRITE(12)")) == 0) - reply = do_write(fsg); - break; - - /* Some mandatory commands that we recognize but don't implement. - * They don't mean much in this setting. It's left as an exercise - * for anyone interested to implement RESERVE and RELEASE in terms - * of Posix locks. */ - case FORMAT_UNIT: - case RELEASE: - case RESERVE: - case SEND_DIAGNOSTIC: - // Fall through - - default: - unknown_cmnd: - fsg->data_size_from_cmnd = 0; - sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); - if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { - fsg->curlun->sense_data = SS_INVALID_COMMAND; - reply = -EINVAL; - } - break; - } - up_read(&fsg->filesem); - - if (reply == -EINTR || signal_pending(current)) - return -EINTR; - - /* Set up the single reply buffer for finish_reply() */ - if (reply == -EINVAL) - reply = 0; // Error reply length - if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { - reply = min((u32) reply, fsg->data_size_from_cmnd); - bh->inreq->length = reply; - bh->state = BUF_STATE_FULL; - fsg->residue -= reply; - } // Otherwise it's already set - - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct usb_request *req = bh->outreq; - struct bulk_cb_wrap *cbw = req->buf; - - /* Was this a real packet? Should it be ignored? */ - if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) - return -EINVAL; - - /* Is the CBW valid? */ - if (req->actual != US_BULK_CB_WRAP_LEN || - cbw->Signature != cpu_to_le32( - US_BULK_CB_SIGN)) { - DBG(fsg, "invalid CBW: len %u sig 0x%x\n", - req->actual, - le32_to_cpu(cbw->Signature)); - - /* The Bulk-only spec says we MUST stall the IN endpoint - * (6.6.1), so it's unavoidable. It also says we must - * retain this state until the next reset, but there's - * no way to tell the controller driver it should ignore - * Clear-Feature(HALT) requests. - * - * We aren't required to halt the OUT endpoint; instead - * we can simply accept and discard any data received - * until the next reset. */ - wedge_bulk_in_endpoint(fsg); - set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - return -EINVAL; - } - - /* Is the CBW meaningful? */ - if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || - cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { - DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " - "cmdlen %u\n", - cbw->Lun, cbw->Flags, cbw->Length); - - /* We can do anything we want here, so let's stall the - * bulk pipes if we are allowed to. */ - if (mod_data.can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - halt_bulk_in_endpoint(fsg); - } - return -EINVAL; - } - - /* Save the command for later */ - fsg->cmnd_size = cbw->Length; - memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); - if (cbw->Flags & US_BULK_FLAG_IN) - fsg->data_dir = DATA_DIR_TO_HOST; - else - fsg->data_dir = DATA_DIR_FROM_HOST; - fsg->data_size = le32_to_cpu(cbw->DataTransferLength); - if (fsg->data_size == 0) - fsg->data_dir = DATA_DIR_NONE; - fsg->lun = cbw->Lun; - fsg->tag = cbw->Tag; - return 0; -} - - -static int get_next_command(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh; - int rc = 0; - - if (transport_is_bbb()) { - - /* Wait for the next buffer to become available */ - bh = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - /* Queue a request to read a Bulk-only CBW */ - set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); - start_transfer(fsg, fsg->bulk_out, bh->outreq, - &bh->outreq_busy, &bh->state); - - /* We will drain the buffer in software, which means we - * can reuse it for the next filling. No need to advance - * next_buffhd_to_fill. */ - - /* Wait for the CBW to arrive */ - while (bh->state != BUF_STATE_FULL) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - smp_rmb(); - rc = received_cbw(fsg, bh); - bh->state = BUF_STATE_EMPTY; - - } else { // USB_PR_CB or USB_PR_CBI - - /* Wait for the next command to arrive */ - while (fsg->cbbuf_cmnd_size == 0) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - /* Is the previous status interrupt request still busy? - * The host is allowed to skip reading the status, - * so we must cancel it. */ - if (fsg->intreq_busy) - usb_ep_dequeue(fsg->intr_in, fsg->intreq); - - /* Copy the command and mark the buffer empty */ - fsg->data_dir = DATA_DIR_UNKNOWN; - spin_lock_irq(&fsg->lock); - fsg->cmnd_size = fsg->cbbuf_cmnd_size; - memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); - fsg->cbbuf_cmnd_size = 0; - spin_unlock_irq(&fsg->lock); - - /* Use LUN from the command */ - fsg->lun = fsg->cmnd[1] >> 5; - } - - /* Update current lun */ - if (fsg->lun >= 0 && fsg->lun < fsg->nluns) - fsg->curlun = &fsg->luns[fsg->lun]; - else - fsg->curlun = NULL; - - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, - const struct usb_endpoint_descriptor *d) -{ - int rc; - - ep->driver_data = fsg; - ep->desc = d; - rc = usb_ep_enable(ep); - if (rc) - ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); - return rc; -} - -static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request **preq) -{ - *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (*preq) - return 0; - ERROR(fsg, "can't allocate request for %s\n", ep->name); - return -ENOMEM; -} - -/* - * Reset interface setting and re-init endpoint state (toggle etc). - * Call with altsetting < 0 to disable the interface. The only other - * available altsetting is 0, which enables the interface. - */ -static int do_set_interface(struct fsg_dev *fsg, int altsetting) -{ - int rc = 0; - int i; - const struct usb_endpoint_descriptor *d; - - if (fsg->running) - DBG(fsg, "reset interface\n"); - -reset: - /* Deallocate the requests */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &fsg->buffhds[i]; - - if (bh->inreq) { - usb_ep_free_request(fsg->bulk_in, bh->inreq); - bh->inreq = NULL; - } - if (bh->outreq) { - usb_ep_free_request(fsg->bulk_out, bh->outreq); - bh->outreq = NULL; - } - } - if (fsg->intreq) { - usb_ep_free_request(fsg->intr_in, fsg->intreq); - fsg->intreq = NULL; - } - - /* Disable the endpoints */ - if (fsg->bulk_in_enabled) { - usb_ep_disable(fsg->bulk_in); - fsg->bulk_in_enabled = 0; - } - if (fsg->bulk_out_enabled) { - usb_ep_disable(fsg->bulk_out); - fsg->bulk_out_enabled = 0; - } - if (fsg->intr_in_enabled) { - usb_ep_disable(fsg->intr_in); - fsg->intr_in_enabled = 0; - } - - fsg->running = 0; - if (altsetting < 0 || rc != 0) - return rc; - - DBG(fsg, "set interface %d\n", altsetting); - - /* Enable the endpoints */ - d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, - &fsg_ss_bulk_in_desc); - if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) - goto reset; - fsg->bulk_in_enabled = 1; - - d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, - &fsg_ss_bulk_out_desc); - if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) - goto reset; - fsg->bulk_out_enabled = 1; - fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); - clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - - if (transport_is_cbi()) { - d = fsg_ep_desc(fsg->gadget, - &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, - &fsg_ss_intr_in_desc); - if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) - goto reset; - fsg->intr_in_enabled = 1; - } - - /* Allocate the requests */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &fsg->buffhds[i]; - - if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) - goto reset; - if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) - goto reset; - bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->context = bh->outreq->context = bh; - bh->inreq->complete = bulk_in_complete; - bh->outreq->complete = bulk_out_complete; - } - if (transport_is_cbi()) { - if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) - goto reset; - fsg->intreq->complete = intr_in_complete; - } - - fsg->running = 1; - for (i = 0; i < fsg->nluns; ++i) - fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; - return rc; -} - - -/* - * Change our operational configuration. This code must agree with the code - * that returns config descriptors, and with interface altsetting code. - * - * It's also responsible for power management interactions. Some - * configurations might not work with our current power sources. - * For now we just assume the gadget is always self-powered. - */ -static int do_set_config(struct fsg_dev *fsg, u8 new_config) -{ - int rc = 0; - - /* Disable the single interface */ - if (fsg->config != 0) { - DBG(fsg, "reset config\n"); - fsg->config = 0; - rc = do_set_interface(fsg, -1); - } - - /* Enable the interface */ - if (new_config != 0) { - fsg->config = new_config; - if ((rc = do_set_interface(fsg, 0)) != 0) - fsg->config = 0; // Reset on errors - else - INFO(fsg, "%s config #%d\n", - usb_speed_string(fsg->gadget->speed), - fsg->config); - } - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static void handle_exception(struct fsg_dev *fsg) -{ - siginfo_t info; - int sig; - int i; - int num_active; - struct fsg_buffhd *bh; - enum fsg_state old_state; - u8 new_config; - struct fsg_lun *curlun; - unsigned int exception_req_tag; - int rc; - - /* Clear the existing signals. Anything but SIGUSR1 is converted - * into a high-priority EXIT exception. */ - for (;;) { - sig = dequeue_signal_lock(current, ¤t->blocked, &info); - if (!sig) - break; - if (sig != SIGUSR1) { - if (fsg->state < FSG_STATE_EXIT) - DBG(fsg, "Main thread exiting on signal\n"); - raise_exception(fsg, FSG_STATE_EXIT); - } - } - - /* Cancel all the pending transfers */ - if (fsg->intreq_busy) - usb_ep_dequeue(fsg->intr_in, fsg->intreq); - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &fsg->buffhds[i]; - if (bh->inreq_busy) - usb_ep_dequeue(fsg->bulk_in, bh->inreq); - if (bh->outreq_busy) - usb_ep_dequeue(fsg->bulk_out, bh->outreq); - } - - /* Wait until everything is idle */ - for (;;) { - num_active = fsg->intreq_busy; - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &fsg->buffhds[i]; - num_active += bh->inreq_busy + bh->outreq_busy; - } - if (num_active == 0) - break; - if (sleep_thread(fsg)) - return; - } - - /* Clear out the controller's fifos */ - if (fsg->bulk_in_enabled) - usb_ep_fifo_flush(fsg->bulk_in); - if (fsg->bulk_out_enabled) - usb_ep_fifo_flush(fsg->bulk_out); - if (fsg->intr_in_enabled) - usb_ep_fifo_flush(fsg->intr_in); - - /* Reset the I/O buffer states and pointers, the SCSI - * state, and the exception. Then invoke the handler. */ - spin_lock_irq(&fsg->lock); - - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &fsg->buffhds[i]; - bh->state = BUF_STATE_EMPTY; - } - fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = - &fsg->buffhds[0]; - - exception_req_tag = fsg->exception_req_tag; - new_config = fsg->new_config; - old_state = fsg->state; - - if (old_state == FSG_STATE_ABORT_BULK_OUT) - fsg->state = FSG_STATE_STATUS_PHASE; - else { - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - curlun->prevent_medium_removal = 0; - curlun->sense_data = curlun->unit_attention_data = - SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - fsg->state = FSG_STATE_IDLE; - } - spin_unlock_irq(&fsg->lock); - - /* Carry out any extra actions required for the exception */ - switch (old_state) { - default: - break; - - case FSG_STATE_ABORT_BULK_OUT: - send_status(fsg); - spin_lock_irq(&fsg->lock); - if (fsg->state == FSG_STATE_STATUS_PHASE) - fsg->state = FSG_STATE_IDLE; - spin_unlock_irq(&fsg->lock); - break; - - case FSG_STATE_RESET: - /* In case we were forced against our will to halt a - * bulk endpoint, clear the halt now. (The SuperH UDC - * requires this.) */ - if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) - usb_ep_clear_halt(fsg->bulk_in); - - if (transport_is_bbb()) { - if (fsg->ep0_req_tag == exception_req_tag) - ep0_queue(fsg); // Complete the status stage - - } else if (transport_is_cbi()) - send_status(fsg); // Status by interrupt pipe - - /* Technically this should go here, but it would only be - * a waste of time. Ditto for the INTERFACE_CHANGE and - * CONFIG_CHANGE cases. */ - // for (i = 0; i < fsg->nluns; ++i) - // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; - break; - - case FSG_STATE_INTERFACE_CHANGE: - rc = do_set_interface(fsg, 0); - if (fsg->ep0_req_tag != exception_req_tag) - break; - if (rc != 0) // STALL on errors - fsg_set_halt(fsg, fsg->ep0); - else // Complete the status stage - ep0_queue(fsg); - break; - - case FSG_STATE_CONFIG_CHANGE: - rc = do_set_config(fsg, new_config); - if (fsg->ep0_req_tag != exception_req_tag) - break; - if (rc != 0) // STALL on errors - fsg_set_halt(fsg, fsg->ep0); - else // Complete the status stage - ep0_queue(fsg); - break; - - case FSG_STATE_DISCONNECT: - for (i = 0; i < fsg->nluns; ++i) - fsg_lun_fsync_sub(fsg->luns + i); - do_set_config(fsg, 0); // Unconfigured state - break; - - case FSG_STATE_EXIT: - case FSG_STATE_TERMINATED: - do_set_config(fsg, 0); // Free resources - spin_lock_irq(&fsg->lock); - fsg->state = FSG_STATE_TERMINATED; // Stop the thread - spin_unlock_irq(&fsg->lock); - break; - } -} - - -/*-------------------------------------------------------------------------*/ - -static int fsg_main_thread(void *fsg_) -{ - struct fsg_dev *fsg = fsg_; - - /* Allow the thread to be killed by a signal, but set the signal mask - * to block everything but INT, TERM, KILL, and USR1. */ - allow_signal(SIGINT); - allow_signal(SIGTERM); - allow_signal(SIGKILL); - allow_signal(SIGUSR1); - - /* Allow the thread to be frozen */ - set_freezable(); - - /* Arrange for userspace references to be interpreted as kernel - * pointers. That way we can pass a kernel pointer to a routine - * that expects a __user pointer and it will work okay. */ - set_fs(get_ds()); - - /* The main loop */ - while (fsg->state != FSG_STATE_TERMINATED) { - if (exception_in_progress(fsg) || signal_pending(current)) { - handle_exception(fsg); - continue; - } - - if (!fsg->running) { - sleep_thread(fsg); - continue; - } - - if (get_next_command(fsg)) - continue; - - spin_lock_irq(&fsg->lock); - if (!exception_in_progress(fsg)) - fsg->state = FSG_STATE_DATA_PHASE; - spin_unlock_irq(&fsg->lock); - - if (do_scsi_command(fsg) || finish_reply(fsg)) - continue; - - spin_lock_irq(&fsg->lock); - if (!exception_in_progress(fsg)) - fsg->state = FSG_STATE_STATUS_PHASE; - spin_unlock_irq(&fsg->lock); - - if (send_status(fsg)) - continue; - - spin_lock_irq(&fsg->lock); - if (!exception_in_progress(fsg)) - fsg->state = FSG_STATE_IDLE; - spin_unlock_irq(&fsg->lock); - } - - spin_lock_irq(&fsg->lock); - fsg->thread_task = NULL; - spin_unlock_irq(&fsg->lock); - - /* If we are exiting because of a signal, unregister the - * gadget driver. */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) - usb_gadget_unregister_driver(&fsg_driver); - - /* Let the unbind and cleanup routines know the thread has exited */ - complete_and_exit(&fsg->thread_notifier, 0); -} - - -/*-------------------------------------------------------------------------*/ - - -/* The write permissions and store_xxx pointers are set in fsg_bind() */ -static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); -static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); -static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); - - -/*-------------------------------------------------------------------------*/ - -static void fsg_release(struct kref *ref) -{ - struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); - - kfree(fsg->luns); - kfree(fsg); -} - -static void lun_release(struct device *dev) -{ - struct rw_semaphore *filesem = dev_get_drvdata(dev); - struct fsg_dev *fsg = - container_of(filesem, struct fsg_dev, filesem); - - kref_put(&fsg->ref, fsg_release); -} - -static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - int i; - struct fsg_lun *curlun; - struct usb_request *req = fsg->ep0req; - - DBG(fsg, "unbind\n"); - clear_bit(REGISTERED, &fsg->atomic_bitflags); - - /* If the thread isn't already dead, tell it to exit now */ - if (fsg->state != FSG_STATE_TERMINATED) { - raise_exception(fsg, FSG_STATE_EXIT); - wait_for_completion(&fsg->thread_notifier); - - /* The cleanup routine waits for this completion also */ - complete(&fsg->thread_notifier); - } - - /* Unregister the sysfs attribute files and the LUNs */ - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - if (curlun->registered) { - device_remove_file(&curlun->dev, &dev_attr_nofua); - device_remove_file(&curlun->dev, &dev_attr_ro); - device_remove_file(&curlun->dev, &dev_attr_file); - fsg_lun_close(curlun); - device_unregister(&curlun->dev); - curlun->registered = 0; - } - } - - /* Free the data buffers */ - for (i = 0; i < fsg_num_buffers; ++i) - kfree(fsg->buffhds[i].buf); - - /* Free the request and buffer for endpoint 0 */ - if (req) { - kfree(req->buf); - usb_ep_free_request(fsg->ep0, req); - } - - set_gadget_data(gadget, NULL); -} - - -static int __init check_parameters(struct fsg_dev *fsg) -{ - int prot; - - /* Store the default values */ - mod_data.transport_type = USB_PR_BULK; - mod_data.transport_name = "Bulk-only"; - mod_data.protocol_type = USB_SC_SCSI; - mod_data.protocol_name = "Transparent SCSI"; - - /* Some peripheral controllers are known not to be able to - * halt bulk endpoints correctly. If one of them is present, - * disable stalls. - */ - if (gadget_is_at91(fsg->gadget)) - mod_data.can_stall = 0; - - if (mod_data.release == 0xffff) - mod_data.release = get_default_bcdDevice(); - - prot = simple_strtol(mod_data.protocol_parm, NULL, 0); - -#ifdef CONFIG_USB_FILE_STORAGE_TEST - if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { - ; // Use default setting - } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { - mod_data.transport_type = USB_PR_CB; - mod_data.transport_name = "Control-Bulk"; - } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { - mod_data.transport_type = USB_PR_CBI; - mod_data.transport_name = "Control-Bulk-Interrupt"; - } else { - ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); - return -EINVAL; - } - - if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || - prot == USB_SC_SCSI) { - ; // Use default setting - } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || - prot == USB_SC_RBC) { - mod_data.protocol_type = USB_SC_RBC; - mod_data.protocol_name = "RBC"; - } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || - strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || - prot == USB_SC_8020) { - mod_data.protocol_type = USB_SC_8020; - mod_data.protocol_name = "8020i (ATAPI)"; - } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || - prot == USB_SC_QIC) { - mod_data.protocol_type = USB_SC_QIC; - mod_data.protocol_name = "QIC-157"; - } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || - prot == USB_SC_UFI) { - mod_data.protocol_type = USB_SC_UFI; - mod_data.protocol_name = "UFI"; - } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || - prot == USB_SC_8070) { - mod_data.protocol_type = USB_SC_8070; - mod_data.protocol_name = "8070i"; - } else { - ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); - return -EINVAL; - } - - mod_data.buflen &= PAGE_CACHE_MASK; - if (mod_data.buflen <= 0) { - ERROR(fsg, "invalid buflen\n"); - return -ETOOSMALL; - } - -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - /* Serial string handling. - * On a real device, the serial string would be loaded - * from permanent storage. */ - if (mod_data.serial) { - const char *ch; - unsigned len = 0; - - /* Sanity check : - * The CB[I] specification limits the serial string to - * 12 uppercase hexadecimal characters. - * BBB need at least 12 uppercase hexadecimal characters, - * with a maximum of 126. */ - for (ch = mod_data.serial; *ch; ++ch) { - ++len; - if ((*ch < '0' || *ch > '9') && - (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ - WARNING(fsg, - "Invalid serial string character: %c\n", - *ch); - goto no_serial; - } - } - if (len > 126 || - (mod_data.transport_type == USB_PR_BULK && len < 12) || - (mod_data.transport_type != USB_PR_BULK && len > 12)) { - WARNING(fsg, "Invalid serial string length!\n"); - goto no_serial; - } - fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; - } else { - WARNING(fsg, "No serial-number string provided!\n"); - no_serial: - device_desc.iSerialNumber = 0; - } - - return 0; -} - - -static int __init fsg_bind(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct fsg_dev *fsg = the_fsg; - int rc; - int i; - struct fsg_lun *curlun; - struct usb_ep *ep; - struct usb_request *req; - char *pathbuf, *p; - - fsg->gadget = gadget; - set_gadget_data(gadget, fsg); - fsg->ep0 = gadget->ep0; - fsg->ep0->driver_data = fsg; - - if ((rc = check_parameters(fsg)) != 0) - goto out; - - if (mod_data.removable) { // Enable the store_xxx attributes - dev_attr_file.attr.mode = 0644; - dev_attr_file.store = fsg_store_file; - if (!mod_data.cdrom) { - dev_attr_ro.attr.mode = 0644; - dev_attr_ro.store = fsg_store_ro; - } - } - - /* Only for removable media? */ - dev_attr_nofua.attr.mode = 0644; - dev_attr_nofua.store = fsg_store_nofua; - - /* Find out how many LUNs there should be */ - i = mod_data.nluns; - if (i == 0) - i = max(mod_data.num_filenames, 1u); - if (i > FSG_MAX_LUNS) { - ERROR(fsg, "invalid number of LUNs: %d\n", i); - rc = -EINVAL; - goto out; - } - - /* Create the LUNs, open their backing files, and register the - * LUN devices in sysfs. */ - fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); - if (!fsg->luns) { - rc = -ENOMEM; - goto out; - } - fsg->nluns = i; - - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - curlun->cdrom = !!mod_data.cdrom; - curlun->ro = mod_data.cdrom || mod_data.ro[i]; - curlun->initially_ro = curlun->ro; - curlun->removable = mod_data.removable; - curlun->nofua = mod_data.nofua[i]; - curlun->dev.release = lun_release; - curlun->dev.parent = &gadget->dev; - curlun->dev.driver = &fsg_driver.driver; - dev_set_drvdata(&curlun->dev, &fsg->filesem); - dev_set_name(&curlun->dev,"%s-lun%d", - dev_name(&gadget->dev), i); - - kref_get(&fsg->ref); - rc = device_register(&curlun->dev); - if (rc) { - INFO(fsg, "failed to register LUN%d: %d\n", i, rc); - put_device(&curlun->dev); - goto out; - } - curlun->registered = 1; - - rc = device_create_file(&curlun->dev, &dev_attr_ro); - if (rc) - goto out; - rc = device_create_file(&curlun->dev, &dev_attr_nofua); - if (rc) - goto out; - rc = device_create_file(&curlun->dev, &dev_attr_file); - if (rc) - goto out; - - if (mod_data.file[i] && *mod_data.file[i]) { - rc = fsg_lun_open(curlun, mod_data.file[i]); - if (rc) - goto out; - } else if (!mod_data.removable) { - ERROR(fsg, "no file given for LUN%d\n", i); - rc = -EINVAL; - goto out; - } - } - - /* Find all the endpoints we will use */ - usb_ep_autoconfig_reset(gadget); - ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg; // claim the endpoint - fsg->bulk_in = ep; - - ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg; // claim the endpoint - fsg->bulk_out = ep; - - if (transport_is_cbi()) { - ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg; // claim the endpoint - fsg->intr_in = ep; - } - - /* Fix up the descriptors */ - device_desc.idVendor = cpu_to_le16(mod_data.vendor); - device_desc.idProduct = cpu_to_le16(mod_data.product); - device_desc.bcdDevice = cpu_to_le16(mod_data.release); - - i = (transport_is_cbi() ? 3 : 2); // Number of endpoints - fsg_intf_desc.bNumEndpoints = i; - fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; - fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; - fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; - - if (gadget_is_dualspeed(gadget)) { - fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; - - /* Assume endpoint addresses are the same for both speeds */ - fsg_hs_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_hs_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - fsg_hs_intr_in_desc.bEndpointAddress = - fsg_fs_intr_in_desc.bEndpointAddress; - } - - if (gadget_is_superspeed(gadget)) { - unsigned max_burst; - - fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; - - /* Calculate bMaxBurst, we know packet size is 1024 */ - max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); - - /* Assume endpoint addresses are the same for both speeds */ - fsg_ss_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; - - fsg_ss_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; - } - - if (gadget_is_otg(gadget)) - fsg_otg_desc.bmAttributes |= USB_OTG_HNP; - - rc = -ENOMEM; - - /* Allocate the request and buffer for endpoint 0 */ - fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); - if (!req) - goto out; - req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); - if (!req->buf) - goto out; - req->complete = ep0_complete; - - /* Allocate the data buffers */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &fsg->buffhds[i]; - - /* Allocate for the bulk-in endpoint. We assume that - * the buffer will also work with the bulk-out (and - * interrupt-in) endpoint. */ - bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); - if (!bh->buf) - goto out; - bh->next = bh + 1; - } - fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; - - /* This should reflect the actual gadget power source */ - usb_gadget_set_selfpowered(gadget); - - snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, - "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - - fsg->thread_task = kthread_create(fsg_main_thread, fsg, - "file-storage-gadget"); - if (IS_ERR(fsg->thread_task)) { - rc = PTR_ERR(fsg->thread_task); - goto out; - } - - INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); - INFO(fsg, "NOTE: This driver is deprecated. " - "Consider using g_mass_storage instead.\n"); - INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); - - pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - if (fsg_lun_is_open(curlun)) { - p = NULL; - if (pathbuf) { - p = d_path(&curlun->filp->f_path, - pathbuf, PATH_MAX); - if (IS_ERR(p)) - p = NULL; - } - LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", - curlun->ro, curlun->nofua, (p ? p : "(error)")); - } - } - kfree(pathbuf); - - DBG(fsg, "transport=%s (x%02x)\n", - mod_data.transport_name, mod_data.transport_type); - DBG(fsg, "protocol=%s (x%02x)\n", - mod_data.protocol_name, mod_data.protocol_type); - DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", - mod_data.vendor, mod_data.product, mod_data.release); - DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", - mod_data.removable, mod_data.can_stall, - mod_data.cdrom, mod_data.buflen); - DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); - - set_bit(REGISTERED, &fsg->atomic_bitflags); - - /* Tell the thread to start working */ - wake_up_process(fsg->thread_task); - return 0; - -autoconf_fail: - ERROR(fsg, "unable to autoconfigure all endpoints\n"); - rc = -ENOTSUPP; - -out: - fsg->state = FSG_STATE_TERMINATED; // The thread is dead - fsg_unbind(gadget); - complete(&fsg->thread_notifier); - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static void fsg_suspend(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - - DBG(fsg, "suspend\n"); - set_bit(SUSPENDED, &fsg->atomic_bitflags); -} - -static void fsg_resume(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - - DBG(fsg, "resume\n"); - clear_bit(SUSPENDED, &fsg->atomic_bitflags); -} - - -/*-------------------------------------------------------------------------*/ - -static __refdata struct usb_gadget_driver fsg_driver = { - .max_speed = USB_SPEED_SUPER, - .function = (char *) fsg_string_product, - .bind = fsg_bind, - .unbind = fsg_unbind, - .disconnect = fsg_disconnect, - .setup = fsg_setup, - .suspend = fsg_suspend, - .resume = fsg_resume, - - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - // .release = ... - // .suspend = ... - // .resume = ... - }, -}; - - -static int __init fsg_alloc(void) -{ - struct fsg_dev *fsg; - - fsg = kzalloc(sizeof *fsg + - fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); - - if (!fsg) - return -ENOMEM; - spin_lock_init(&fsg->lock); - init_rwsem(&fsg->filesem); - kref_init(&fsg->ref); - init_completion(&fsg->thread_notifier); - - the_fsg = fsg; - return 0; -} - - -static int __init fsg_init(void) -{ - int rc; - struct fsg_dev *fsg; - - rc = fsg_num_buffers_validate(); - if (rc != 0) - return rc; - - if ((rc = fsg_alloc()) != 0) - return rc; - fsg = the_fsg; - rc = usb_gadget_probe_driver(&fsg_driver); - if (rc != 0) - kref_put(&fsg->ref, fsg_release); - return rc; -} -module_init(fsg_init); - - -static void __exit fsg_cleanup(void) -{ - struct fsg_dev *fsg = the_fsg; - - /* Unregister the driver iff the thread hasn't already done so */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) - usb_gadget_unregister_driver(&fsg_driver); - - /* Wait for the thread to finish up */ - wait_for_completion(&fsg->thread_notifier); - - kref_put(&fsg->ref, fsg_release); -} -module_exit(fsg_cleanup); |
