diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/twl4030_charger.c | 36 |
1 files changed, 29 insertions, 7 deletions
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c index 3b7cc631bb8a..982675df21b7 100644 --- a/drivers/power/twl4030_charger.c +++ b/drivers/power/twl4030_charger.c @@ -22,6 +22,7 @@ #include <linux/power_supply.h> #include <linux/notifier.h> #include <linux/usb/otg.h> +#include <linux/i2c/twl4030-madc.h> #define TWL4030_BCIMSTATEC 0x02 #define TWL4030_BCIICHG 0x08 @@ -101,10 +102,13 @@ struct twl4030_bci { int usb_enabled; /* - * ichg values in uA. If any are 'large', we set CGAIN to - * '1' which doubles the range for half the precision. + * ichg_* and *_cur values in uA. If any are 'large', we set + * CGAIN to '1' which doubles the range for half the + * precision. */ - unsigned int ichg_eoc, ichg_lo, ichg_hi, cur; + unsigned int ichg_eoc, ichg_lo, ichg_hi; + unsigned int usb_cur, ac_cur; + bool ac_is_active; unsigned long event; }; @@ -225,11 +229,24 @@ static int ua2regval(int ua, bool cgain) static int twl4030_charger_update_current(struct twl4030_bci *bci) { int status; + int cur; unsigned reg, cur_reg; u8 bcictl1, oldreg, fullreg; bool cgain = false; u8 boot_bci; + /* + * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) + * and AC is enabled, set current for 'ac' + */ + if (twl4030_get_madc_conversion(11) > 4500) { + cur = bci->ac_cur; + bci->ac_is_active = true; + } else { + cur = bci->usb_cur; + bci->ac_is_active = false; + } + /* First, check thresholds and see if cgain is needed */ if (bci->ichg_eoc >= 200000) cgain = true; @@ -237,7 +254,7 @@ static int twl4030_charger_update_current(struct twl4030_bci *bci) cgain = true; if (bci->ichg_hi >= 820000) cgain = true; - if (bci->cur > 852000) + if (cur > 852000) cgain = true; status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); @@ -318,7 +335,7 @@ static int twl4030_charger_update_current(struct twl4030_bci *bci) * And finally, set the current. This is stored in * two registers. */ - reg = ua2regval(bci->cur, cgain); + reg = ua2regval(cur, cgain); /* we have only 10 bits */ if (reg > 0x3ff) reg = 0x3ff; @@ -371,6 +388,8 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) if (enable && !IS_ERR_OR_NULL(bci->transceiver)) { + twl4030_charger_update_current(bci); + /* Need to keep phy powered */ if (!bci->usb_enabled) { pm_runtime_get_sync(bci->transceiver->dev); @@ -463,6 +482,7 @@ static irqreturn_t twl4030_charger_interrupt(int irq, void *arg) struct twl4030_bci *bci = arg; dev_dbg(bci->dev, "CHG_PRES irq\n"); + twl4030_charger_update_current(bci); power_supply_changed(bci->ac); power_supply_changed(bci->usb); @@ -495,6 +515,7 @@ static irqreturn_t twl4030_bci_interrupt(int irq, void *arg) power_supply_changed(bci->ac); power_supply_changed(bci->usb); } + twl4030_charger_update_current(bci); /* various monitoring events, for now we just log them here */ if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1)) @@ -724,10 +745,11 @@ static int twl4030_bci_probe(struct platform_device *pdev) bci->ichg_eoc = 80100; /* Stop charging when current drops to here */ bci->ichg_lo = 241000; /* Low threshold */ bci->ichg_hi = 500000; /* High threshold */ + bci->ac_cur = 500000; /* 500mA */ if (allow_usb) - bci->cur = 500000; /* 500mA */ + bci->usb_cur = 500000; /* 500mA */ else - bci->cur = 100000; /* 100mA */ + bci->usb_cur = 100000; /* 100mA */ bci->dev = &pdev->dev; bci->irq_chg = platform_get_irq(pdev, 0); |
