summaryrefslogtreecommitdiffstats
path: root/drivers/platform/mellanox
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/mellanox')
-rw-r--r--drivers/platform/mellanox/Kconfig11
-rw-r--r--drivers/platform/mellanox/Makefile1
-rw-r--r--drivers/platform/mellanox/mlxreg-hotplug.c60
-rw-r--r--drivers/platform/mellanox/mlxreg-io.c245
4 files changed, 300 insertions, 17 deletions
diff --git a/drivers/platform/mellanox/Kconfig b/drivers/platform/mellanox/Kconfig
index 591bccdeaff9..cd8a90846063 100644
--- a/drivers/platform/mellanox/Kconfig
+++ b/drivers/platform/mellanox/Kconfig
@@ -23,4 +23,15 @@ config MLXREG_HOTPLUG
This driver handles hot-plug events for the power suppliers, power
cables and fans on the wide range Mellanox IB and Ethernet systems.
+config MLXREG_IO
+ tristate "Mellanox platform register access driver support"
+ depends on REGMAP
+ depends on HWMON
+ help
+ This driver allows access to Mellanox programmable device register
+ space through sysfs interface. The sets of registers for sysfs access
+ are defined per system type bases and include the registers related
+ to system resets operation, system reset causes monitoring and some
+ kinds of mux selection.
+
endif # MELLANOX_PLATFORM
diff --git a/drivers/platform/mellanox/Makefile b/drivers/platform/mellanox/Makefile
index 7c8385e497a8..57074d9c722c 100644
--- a/drivers/platform/mellanox/Makefile
+++ b/drivers/platform/mellanox/Makefile
@@ -4,3 +4,4 @@
# Mellanox Platform-Specific Drivers
#
obj-$(CONFIG_MLXREG_HOTPLUG) += mlxreg-hotplug.o
+obj-$(CONFIG_MLXREG_IO) += mlxreg-io.o
diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
index ac97aa020db3..b6d44550d98c 100644
--- a/drivers/platform/mellanox/mlxreg-hotplug.c
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -50,9 +50,8 @@
#define MLXREG_HOTPLUG_MASK_OFF 2
#define MLXREG_HOTPLUG_AGGR_MASK_OFF 1
-/* ASIC health parameters. */
-#define MLXREG_HOTPLUG_HEALTH_MASK 0x02
-#define MLXREG_HOTPLUG_RST_CNTR 3
+/* ASIC good health mask. */
+#define MLXREG_HOTPLUG_GOOD_HEALTH_MASK 0x02
#define MLXREG_HOTPLUG_ATTRS_MAX 24
#define MLXREG_HOTPLUG_NOT_ASSERT 3
@@ -103,6 +102,9 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
{
struct mlxreg_core_hotplug_platform_data *pdata;
+ /* Notify user by sending hwmon uevent. */
+ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
+
/*
* Return if adapter number is negative. It could be in case hotplug
* event is not associated with hotplug device.
@@ -134,8 +136,13 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
return 0;
}
-static void mlxreg_hotplug_device_destroy(struct mlxreg_core_data *data)
+static void
+mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv,
+ struct mlxreg_core_data *data)
{
+ /* Notify user by sending hwmon uevent. */
+ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
+
if (data->hpdev.client) {
i2c_unregister_device(data->hpdev.client);
data->hpdev.client = NULL;
@@ -278,14 +285,14 @@ mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
data = item->data + bit;
if (regval & BIT(bit)) {
if (item->inversed)
- mlxreg_hotplug_device_destroy(data);
+ mlxreg_hotplug_device_destroy(priv, data);
else
mlxreg_hotplug_device_create(priv, data);
} else {
if (item->inversed)
mlxreg_hotplug_device_create(priv, data);
else
- mlxreg_hotplug_device_destroy(data);
+ mlxreg_hotplug_device_destroy(priv, data);
}
}
@@ -325,21 +332,40 @@ mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv,
goto out;
regval &= data->mask;
- item->cache = regval;
- if (regval == MLXREG_HOTPLUG_HEALTH_MASK) {
- if ((data->health_cntr++ == MLXREG_HOTPLUG_RST_CNTR) ||
- !priv->after_probe) {
+
+ if (item->cache == regval)
+ goto ack_event;
+
+ /*
+ * ASIC health indication is provided through two bits. Bits
+ * value 0x2 indicates that ASIC reached the good health, value
+ * 0x0 indicates ASIC the bad health or dormant state and value
+ * 0x3 indicates the booting state. During ASIC reset it should
+ * pass the following states: dormant -> booting -> good.
+ */
+ if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) {
+ if (!data->attached) {
+ /*
+ * ASIC is in steady state. Connect associated
+ * device, if configured.
+ */
mlxreg_hotplug_device_create(priv, data);
data->attached = true;
}
} else {
if (data->attached) {
- mlxreg_hotplug_device_destroy(data);
+ /*
+ * ASIC health is failed after ASIC has been
+ * in steady state. Disconnect associated
+ * device, if it has been connected.
+ */
+ mlxreg_hotplug_device_destroy(priv, data);
data->attached = false;
data->health_cntr = 0;
}
}
-
+ item->cache = regval;
+ack_event:
/* Acknowledge event. */
ret = regmap_write(priv->regmap, data->reg +
MLXREG_HOTPLUG_EVENT_OFF, 0);
@@ -551,7 +577,7 @@ static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv)
/* Remove all the attached devices in group. */
count = item->count;
for (j = 0; j < count; j++, data++)
- mlxreg_hotplug_device_destroy(data);
+ mlxreg_hotplug_device_destroy(priv, data);
}
}
@@ -616,10 +642,6 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev)
disable_irq(priv->irq);
spin_lock_init(&priv->lock);
INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler);
- /* Perform initial interrupts setup. */
- mlxreg_hotplug_set_irq(priv);
-
- priv->after_probe = true;
dev_set_drvdata(&pdev->dev, priv);
err = mlxreg_hotplug_attr_init(priv);
@@ -637,6 +659,10 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev)
return PTR_ERR(priv->hwmon);
}
+ /* Perform initial interrupts setup. */
+ mlxreg_hotplug_set_irq(priv);
+ priv->after_probe = true;
+
return 0;
}
diff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c
new file mode 100644
index 000000000000..acfaf64ffde6
--- /dev/null
+++ b/drivers/platform/mellanox/mlxreg-io.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mellanox register access driver
+ *
+ * Copyright (C) 2018 Mellanox Technologies
+ * Copyright (C) 2018 Vadim Pasternak <vadimp@mellanox.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/mlxreg.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* Attribute parameters. */
+#define MLXREG_IO_ATT_SIZE 10
+#define MLXREG_IO_ATT_NUM 48
+
+/**
+ * struct mlxreg_io_priv_data - driver's private data:
+ *
+ * @pdev: platform device;
+ * @pdata: platform data;
+ * @hwmon: hwmon device;
+ * @mlxreg_io_attr: sysfs attributes array;
+ * @mlxreg_io_dev_attr: sysfs sensor device attribute array;
+ * @group: sysfs attribute group;
+ * @groups: list of sysfs attribute group for hwmon registration;
+ */
+struct mlxreg_io_priv_data {
+ struct platform_device *pdev;
+ struct mlxreg_core_platform_data *pdata;
+ struct device *hwmon;
+ struct attribute *mlxreg_io_attr[MLXREG_IO_ATT_NUM + 1];
+ struct sensor_device_attribute mlxreg_io_dev_attr[MLXREG_IO_ATT_NUM];
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+};
+
+static int
+mlxreg_io_get_reg(void *regmap, struct mlxreg_core_data *data, u32 in_val,
+ bool rw_flag, u32 *regval)
+{
+ int ret;
+
+ ret = regmap_read(regmap, data->reg, regval);
+ if (ret)
+ goto access_error;
+
+ /*
+ * There are three kinds of attributes: single bit, full register's
+ * bits and bit sequence. For the first kind field mask indicates which
+ * bits are not related and field bit is set zero. For the second kind
+ * field mask is set to zero and field bit is set with all bits one.
+ * No special handling for such kind of attributes - pass value as is.
+ * For the third kind, field mask indicates which bits are related and
+ * field bit is set to the first bit number (from 1 to 32) is the bit
+ * sequence.
+ */
+ if (!data->bit) {
+ /* Single bit. */
+ if (rw_flag) {
+ /* For show: expose effective bit value as 0 or 1. */
+ *regval = !!(*regval & ~data->mask);
+ } else {
+ /* For store: set effective bit value. */
+ *regval &= data->mask;
+ if (in_val)
+ *regval |= ~data->mask;
+ }
+ } else if (data->mask) {
+ /* Bit sequence. */
+ if (rw_flag) {
+ /* For show: mask and shift right. */
+ *regval = ror32(*regval & data->mask, (data->bit - 1));
+ } else {
+ /* For store: shift to the position and mask. */
+ in_val = rol32(in_val, data->bit - 1) & data->mask;
+ /* Clear relevant bits and set them to new value. */
+ *regval = (*regval & ~data->mask) | in_val;
+ }
+ }
+
+access_error:
+ return ret;
+}
+
+static ssize_t
+mlxreg_io_attr_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mlxreg_io_priv_data *priv = dev_get_drvdata(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct mlxreg_core_data *data = priv->pdata->data + index;
+ u32 regval = 0;
+ int ret;
+
+ ret = mlxreg_io_get_reg(priv->pdata->regmap, data, 0, true, &regval);
+ if (ret)
+ goto access_error;
+
+ return sprintf(buf, "%u\n", regval);
+
+access_error:
+ return ret;
+}
+
+static ssize_t
+mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct mlxreg_io_priv_data *priv = dev_get_drvdata(dev);
+ int index = to_sensor_dev_attr(attr)->index;
+ struct mlxreg_core_data *data = priv->pdata->data + index;
+ u32 input_val, regval;
+ int ret;
+
+ if (len > MLXREG_IO_ATT_SIZE)
+ return -EINVAL;
+
+ /* Convert buffer to input value. */
+ ret = kstrtou32(buf, len, &input_val);
+ if (ret)
+ return ret;
+
+ ret = mlxreg_io_get_reg(priv->pdata->regmap, data, input_val, false,
+ &regval);
+ if (ret)
+ goto access_error;
+
+ ret = regmap_write(priv->pdata->regmap, data->reg, regval);
+ if (ret)
+ goto access_error;
+
+ return len;
+
+access_error:
+ dev_err(&priv->pdev->dev, "Bus access error\n");
+ return ret;
+}
+
+static struct device_attribute mlxreg_io_devattr_rw = {
+ .show = mlxreg_io_attr_show,
+ .store = mlxreg_io_attr_store,
+};
+
+static int mlxreg_io_attr_init(struct mlxreg_io_priv_data *priv)
+{
+ int i;
+
+ priv->group.attrs = devm_kcalloc(&priv->pdev->dev,
+ priv->pdata->counter,
+ sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!priv->group.attrs)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->pdata->counter; i++) {
+ priv->mlxreg_io_attr[i] =
+ &priv->mlxreg_io_dev_attr[i].dev_attr.attr;
+ memcpy(&priv->mlxreg_io_dev_attr[i].dev_attr,
+ &mlxreg_io_devattr_rw, sizeof(struct device_attribute));
+
+ /* Set attribute name as a label. */
+ priv->mlxreg_io_attr[i]->name =
+ devm_kasprintf(&priv->pdev->dev, GFP_KERNEL,
+ priv->pdata->data[i].label);
+
+ if (!priv->mlxreg_io_attr[i]->name) {
+ dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n",
+ i + 1);
+ return -ENOMEM;
+ }
+
+ priv->mlxreg_io_dev_attr[i].dev_attr.attr.mode =
+ priv->pdata->data[i].mode;
+ priv->mlxreg_io_dev_attr[i].dev_attr.attr.name =
+ priv->mlxreg_io_attr[i]->name;
+ priv->mlxreg_io_dev_attr[i].index = i;
+ sysfs_attr_init(&priv->mlxreg_io_dev_attr[i].dev_attr.attr);
+ }
+
+ priv->group.attrs = priv->mlxreg_io_attr;
+ priv->groups[0] = &priv->group;
+ priv->groups[1] = NULL;
+
+ return 0;
+}
+
+static int mlxreg_io_probe(struct platform_device *pdev)
+{
+ struct mlxreg_io_priv_data *priv;
+ int err;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pdata = dev_get_platdata(&pdev->dev);
+ if (!priv->pdata) {
+ dev_err(&pdev->dev, "Failed to get platform data.\n");
+ return -EINVAL;
+ }
+
+ priv->pdev = pdev;
+
+ err = mlxreg_io_attr_init(priv);
+ if (err) {
+ dev_err(&priv->pdev->dev, "Failed to allocate attributes: %d\n",
+ err);
+ return err;
+ }
+
+ priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "mlxreg_io",
+ priv,
+ priv->groups);
+ if (IS_ERR(priv->hwmon)) {
+ dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
+ PTR_ERR(priv->hwmon));
+ return PTR_ERR(priv->hwmon);
+ }
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ return 0;
+}
+
+static struct platform_driver mlxreg_io_driver = {
+ .driver = {
+ .name = "mlxreg-io",
+ },
+ .probe = mlxreg_io_probe,
+};
+
+module_platform_driver(mlxreg_io_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox regmap I/O access driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mlxreg-io");
OpenPOWER on IntegriCloud