diff options
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/controller/dwc/pcie-designware.c | 8 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pcie-designware.h | 3 | ||||
-rw-r--r-- | drivers/pci/controller/pci-hyperv.c | 39 | ||||
-rw-r--r-- | drivers/pci/hotplug/acpiphp_glue.c | 11 | ||||
-rw-r--r-- | drivers/pci/hotplug/pciehp_hpc.c | 18 | ||||
-rw-r--r-- | drivers/pci/pci.c | 3 | ||||
-rw-r--r-- | drivers/pci/probe.c | 5 | ||||
-rw-r--r-- | drivers/pci/quirks.c | 6 | ||||
-rw-r--r-- | drivers/pci/switch/switchtec.c | 4 |
9 files changed, 69 insertions, 28 deletions
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 778c4f76a884..2153956a0b20 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -135,7 +135,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, if (val & PCIE_ATU_ENABLE) return; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Outbound iATU is not being enabled\n"); } @@ -178,7 +178,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, if (val & PCIE_ATU_ENABLE) return; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Outbound iATU is not being enabled\n"); } @@ -236,7 +236,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, if (val & PCIE_ATU_ENABLE) return 0; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Inbound iATU is not being enabled\n"); @@ -282,7 +282,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, if (val & PCIE_ATU_ENABLE) return 0; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Inbound iATU is not being enabled\n"); diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 96126fd8403c..9f1a5e399b70 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -26,8 +26,7 @@ /* Parameters for the waiting for iATU enabled routine */ #define LINK_WAIT_MAX_IATU_RETRIES 5 -#define LINK_WAIT_IATU_MIN 9000 -#define LINK_WAIT_IATU_MAX 10000 +#define LINK_WAIT_IATU 9 /* Synopsys-specific PCIe configuration registers */ #define PCIE_PORT_LINK_CONTROL 0x710 diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index c00f82cc54aa..9ba4d12c179c 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -89,6 +89,9 @@ static enum pci_protocol_version_t pci_protocol_version; #define STATUS_REVISION_MISMATCH 0xC0000059 +/* space for 32bit serial number as string */ +#define SLOT_NAME_SIZE 11 + /* * Message Types */ @@ -494,6 +497,7 @@ struct hv_pci_dev { struct list_head list_entry; refcount_t refs; enum hv_pcichild_state state; + struct pci_slot *pci_slot; struct pci_function_description desc; bool reported_missing; struct hv_pcibus_device *hbus; @@ -1457,6 +1461,36 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus) spin_unlock_irqrestore(&hbus->device_list_lock, flags); } +/* + * Assign entries in sysfs pci slot directory. + * + * Note that this function does not need to lock the children list + * because it is called from pci_devices_present_work which + * is serialized with hv_eject_device_work because they are on the + * same ordered workqueue. Therefore hbus->children list will not change + * even when pci_create_slot sleeps. + */ +static void hv_pci_assign_slots(struct hv_pcibus_device *hbus) +{ + struct hv_pci_dev *hpdev; + char name[SLOT_NAME_SIZE]; + int slot_nr; + + list_for_each_entry(hpdev, &hbus->children, list_entry) { + if (hpdev->pci_slot) + continue; + + slot_nr = PCI_SLOT(wslot_to_devfn(hpdev->desc.win_slot.slot)); + snprintf(name, SLOT_NAME_SIZE, "%u", hpdev->desc.ser); + hpdev->pci_slot = pci_create_slot(hbus->pci_bus, slot_nr, + name, NULL); + if (IS_ERR(hpdev->pci_slot)) { + pr_warn("pci_create slot %s failed\n", name); + hpdev->pci_slot = NULL; + } + } +} + /** * create_root_hv_pci_bus() - Expose a new root PCI bus * @hbus: Root PCI bus, as understood by this driver @@ -1480,6 +1514,7 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus) pci_lock_rescan_remove(); pci_scan_child_bus(hbus->pci_bus); pci_bus_assign_resources(hbus->pci_bus); + hv_pci_assign_slots(hbus); pci_bus_add_devices(hbus->pci_bus); pci_unlock_rescan_remove(); hbus->state = hv_pcibus_installed; @@ -1742,6 +1777,7 @@ static void pci_devices_present_work(struct work_struct *work) */ pci_lock_rescan_remove(); pci_scan_child_bus(hbus->pci_bus); + hv_pci_assign_slots(hbus); pci_unlock_rescan_remove(); break; @@ -1858,6 +1894,9 @@ static void hv_eject_device_work(struct work_struct *work) list_del(&hpdev->list_entry); spin_unlock_irqrestore(&hpdev->hbus->device_list_lock, flags); + if (hpdev->pci_slot) + pci_destroy_slot(hpdev->pci_slot); + memset(&ctxt, 0, sizeof(ctxt)); ejct_pkt = (struct pci_eject_response *)&ctxt.pkt.message; ejct_pkt->message_type.type = PCI_EJECTION_COMPLETE; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index ef0b1b6ba86f..12afa7fdf77e 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -457,17 +457,18 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge) /** * enable_slot - enable, configure a slot * @slot: slot to be enabled + * @bridge: true if enable is for the whole bridge (not a single slot) * * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. */ -static void enable_slot(struct acpiphp_slot *slot) +static void enable_slot(struct acpiphp_slot *slot, bool bridge) { struct pci_dev *dev; struct pci_bus *bus = slot->bus; struct acpiphp_func *func; - if (bus->self && hotplug_is_native(bus->self)) { + if (bridge && bus->self && hotplug_is_native(bus->self)) { /* * If native hotplug is used, it will take care of hotplug * slot management and resource allocation for hotplug @@ -701,7 +702,7 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge) trim_stale_devices(dev); /* configure all functions */ - enable_slot(slot); + enable_slot(slot, true); } else { disable_slot(slot); } @@ -785,7 +786,7 @@ static void hotplug_event(u32 type, struct acpiphp_context *context) if (bridge) acpiphp_check_bridge(bridge); else if (!(slot->flags & SLOT_IS_GOING_AWAY)) - enable_slot(slot); + enable_slot(slot, false); break; @@ -973,7 +974,7 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot) /* configure all functions */ if (!(slot->flags & SLOT_ENABLED)) - enable_slot(slot); + enable_slot(slot, false); pci_unlock_rescan_remove(); return 0; diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 7136e3430925..a938abdb41ce 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -496,7 +496,7 @@ int pciehp_power_on_slot(struct slot *slot) u16 slot_status; int retval; - /* Clear sticky power-fault bit from previous power failures */ + /* Clear power-fault bit from previous power failures */ pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); if (slot_status & PCI_EXP_SLTSTA_PFD) pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, @@ -646,6 +646,14 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id) pciehp_handle_button_press(slot); } + /* Check Power Fault Detected */ + if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) { + ctrl->power_fault_detected = 1; + ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(slot)); + pciehp_set_attention_status(slot, 1); + pciehp_green_led_off(slot); + } + /* * Disable requests have higher priority than Presence Detect Changed * or Data Link Layer State Changed events. @@ -657,14 +665,6 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id) pciehp_handle_presence_or_link_change(slot, events); up_read(&ctrl->reset_lock); - /* Check Power Fault Detected */ - if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) { - ctrl->power_fault_detected = 1; - ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(slot)); - pciehp_set_attention_status(slot, 1); - pciehp_green_led_off(slot); - } - pci_config_pm_runtime_put(pdev); wake_up(&ctrl->requester); return IRQ_HANDLED; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 29ff9619b5fa..1835f3a7aa8d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4547,6 +4547,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev) return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS); } +EXPORT_SYMBOL_GPL(pci_bridge_secondary_bus_reset); static int pci_parent_bus_reset(struct pci_dev *dev, int probe) { @@ -5200,7 +5201,7 @@ static int __pci_reset_bus(struct pci_bus *bus) */ int pci_reset_bus(struct pci_dev *pdev) { - return pci_probe_reset_slot(pdev->slot) ? + return (!pci_probe_reset_slot(pdev->slot)) ? __pci_reset_slot(pdev->slot) : __pci_reset_bus(pdev->bus); } EXPORT_SYMBOL_GPL(pci_reset_bus); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index ec784009a36b..201f9e5ff55c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2074,6 +2074,7 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev) { #ifdef CONFIG_PCI_PASID struct pci_dev *bridge; + int pcie_type; u32 cap; if (!pci_is_pcie(dev)) @@ -2083,7 +2084,9 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev) if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX)) return; - if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) + pcie_type = pci_pcie_type(dev); + if (pcie_type == PCI_EXP_TYPE_ROOT_PORT || + pcie_type == PCI_EXP_TYPE_RC_END) dev->eetlp_prefix_path = 1; else { bridge = pci_upstream_bridge(dev); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index ef7143a274e0..6bc27b7fd452 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4355,11 +4355,6 @@ static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags) * * 0x9d10-0x9d1b PCI Express Root port #{1-12} * - * The 300 series chipset suffers from the same bug so include those root - * ports here as well. - * - * 0xa32c-0xa343 PCI Express Root port #{0-24} - * * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html * [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html @@ -4377,7 +4372,6 @@ static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev) case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */ case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */ case 0x9d10 ... 0x9d1b: /* 7th & 8th Gen Mobile */ - case 0xa32c ... 0xa343: /* 300 series */ return true; } diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index 9940cc70f38b..54a8b30dda38 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -14,6 +14,8 @@ #include <linux/poll.h> #include <linux/wait.h> +#include <linux/nospec.h> + MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); @@ -909,6 +911,8 @@ static int ioctl_port_to_pff(struct switchtec_dev *stdev, default: if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id)) return -EINVAL; + p.port = array_index_nospec(p.port, + ARRAY_SIZE(pcfg->dsp_pff_inst_id) + 1); p.pff = ioread32(&pcfg->dsp_pff_inst_id[p.port - 1]); break; } |