summaryrefslogtreecommitdiffstats
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/pci.c92
1 files changed, 92 insertions, 0 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d0182bed7acc..01e4cab2e5cb 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1887,6 +1887,98 @@ void pci_disable_ido(struct pci_dev *dev, unsigned long type)
}
EXPORT_SYMBOL(pci_disable_ido);
+/**
+ * pci_enable_obff - enable optimized buffer flush/fill
+ * @dev: PCI device
+ * @type: type of signaling to use
+ *
+ * Try to enable @type OBFF signaling on @dev. It will try using WAKE#
+ * signaling if possible, falling back to message signaling only if
+ * WAKE# isn't supported. @type should indicate whether the PCIe link
+ * be brought out of L0s or L1 to send the message. It should be either
+ * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
+ *
+ * If your device can benefit from receiving all messages, even at the
+ * power cost of bringing the link back up from a low power state, use
+ * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
+ * preferred type).
+ *
+ * RETURNS:
+ * Zero on success, appropriate error number on failure.
+ */
+int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
+{
+ int pos;
+ u32 cap;
+ u16 ctrl;
+ int ret;
+
+ if (!pci_is_pcie(dev))
+ return -ENOTSUPP;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return -ENOTSUPP;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_OBFF_MASK))
+ return -ENOTSUPP; /* no OBFF support at all */
+
+ /* Make sure the topology supports OBFF as well */
+ if (dev->bus) {
+ ret = pci_enable_obff(dev->bus->self, type);
+ if (ret)
+ return ret;
+ }
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (cap & PCI_EXP_OBFF_WAKE)
+ ctrl |= PCI_EXP_OBFF_WAKE_EN;
+ else {
+ switch (type) {
+ case PCI_EXP_OBFF_SIGNAL_L0:
+ if (!(ctrl & PCI_EXP_OBFF_WAKE_EN))
+ ctrl |= PCI_EXP_OBFF_MSGA_EN;
+ break;
+ case PCI_EXP_OBFF_SIGNAL_ALWAYS:
+ ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
+ ctrl |= PCI_EXP_OBFF_MSGB_EN;
+ break;
+ default:
+ WARN(1, "bad OBFF signal type\n");
+ return -ENOTSUPP;
+ }
+ }
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_enable_obff);
+
+/**
+ * pci_disable_obff - disable optimized buffer flush/fill
+ * @dev: PCI device
+ *
+ * Disable OBFF on @dev.
+ */
+void pci_disable_obff(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_obff);
+
static int pci_acs_enable;
/**
OpenPOWER on IntegriCloud