diff options
Diffstat (limited to 'drivers/pci/quirks.c')
| -rw-r--r-- | drivers/pci/quirks.c | 44 |
1 files changed, 44 insertions, 0 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5c63fe9db5c..53a786fd0d40 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); +#ifdef CONFIG_TILE +/* + * The Tilera TILEmpower platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILE */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting @@ -2311,6 +2329,9 @@ static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev) { u32 cfg; + if (!pci_find_capability(dev, PCI_CAP_ID_HT)) + return; + pci_read_config_dword(dev, 0x74, &cfg); if (cfg & ((1 << 2) | (1 << 15))) { @@ -2746,6 +2767,29 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_m DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ +#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) +#define VTUNCERRMSK_REG 0x1ac +#define VTD_MSK_SPEC_ERRORS (1 << 31) +/* + * This is a quirk for masking vt-d spec defined errors to platform error + * handling logic. With out this, platforms using Intel 7500, 5500 chipsets + * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based + * on the RAS config settings of the platform) when a vt-d fault happens. + * The resulting SMI caused the system to hang. + * + * VT-d spec related errors are already handled by the VT-d OS code, so no + * need to report the same error through other channels. + */ +static void vtd_mask_spec_errors(struct pci_dev *dev) +{ + u32 word; + + pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); + pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); +#endif static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) |
