summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c4
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.h18
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c202
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.h25
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.c4
5 files changed, 227 insertions, 26 deletions
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 4e79a9800134..dfa1b9bc22c8 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -755,7 +755,7 @@ static int hw_reset_phy(struct zd_chip *chip)
static int zd1211_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
- { CR_ZD1211_RETRY_MAX, 0x2 },
+ { CR_ZD1211_RETRY_MAX, ZD1211_RETRY_COUNT },
{ CR_RX_THRESHOLD, 0x000c0640 },
};
@@ -767,7 +767,7 @@ static int zd1211_hw_init_hmac(struct zd_chip *chip)
static int zd1211b_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
- { CR_ZD1211B_RETRY_MAX, 0x02020202 },
+ { CR_ZD1211B_RETRY_MAX, ZD1211B_RETRY_COUNT },
{ CR_ZD1211B_CWIN_MAX_MIN_AC0, 0x007f003f },
{ CR_ZD1211B_CWIN_MAX_MIN_AC1, 0x007f003f },
{ CR_ZD1211B_CWIN_MAX_MIN_AC2, 0x003f001f },
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 678c139a840c..9fd8f3508d66 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -642,13 +642,29 @@ enum {
#define CR_ZD1211B_TXOP CTL_REG(0x0b20)
#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28)
+/* Value for CR_ZD1211_RETRY_MAX & CR_ZD1211B_RETRY_MAX. Vendor driver uses 2,
+ * we use 0. The first rate is tried (count+2), then all next rates are tried
+ * twice, until 1 Mbits is tried. */
+#define ZD1211_RETRY_COUNT 0
+#define ZD1211B_RETRY_COUNT \
+ (ZD1211_RETRY_COUNT << 0)| \
+ (ZD1211_RETRY_COUNT << 8)| \
+ (ZD1211_RETRY_COUNT << 16)| \
+ (ZD1211_RETRY_COUNT << 24)
+
/* Used to detect PLL lock */
#define UW2453_INTR_REG ((zd_addr_t)0x85c1)
#define CWIN_SIZE 0x007f043f
-#define HWINT_ENABLED 0x004f0000
+#define HWINT_ENABLED \
+ (INT_TX_COMPLETE_EN| \
+ INT_RX_COMPLETE_EN| \
+ INT_RETRY_FAIL_EN| \
+ INT_WAKEUP_EN| \
+ INT_CFG_NEXT_BCN_EN)
+
#define HWINT_DISABLED 0
#define E2P_PWR_INT_GUARD 8
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6d666359a42f..8a243732c519 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -88,6 +88,34 @@ static const struct ieee80211_rate zd_rates[] = {
.flags = 0 },
};
+/*
+ * Zydas retry rates table. Each line is listed in the same order as
+ * in zd_rates[] and contains all the rate used when a packet is sent
+ * starting with a given rates. Let's consider an example :
+ *
+ * "11 Mbits : 4, 3, 2, 1, 0" means :
+ * - packet is sent using 4 different rates
+ * - 1st rate is index 3 (ie 11 Mbits)
+ * - 2nd rate is index 2 (ie 5.5 Mbits)
+ * - 3rd rate is index 1 (ie 2 Mbits)
+ * - 4th rate is index 0 (ie 1 Mbits)
+ */
+
+static const struct tx_retry_rate zd_retry_rates[] = {
+ { /* 1 Mbits */ 1, { 0 }},
+ { /* 2 Mbits */ 2, { 1, 0 }},
+ { /* 5.5 Mbits */ 3, { 2, 1, 0 }},
+ { /* 11 Mbits */ 4, { 3, 2, 1, 0 }},
+ { /* 6 Mbits */ 5, { 4, 3, 2, 1, 0 }},
+ { /* 9 Mbits */ 6, { 5, 4, 3, 2, 1, 0}},
+ { /* 12 Mbits */ 5, { 6, 3, 2, 1, 0 }},
+ { /* 18 Mbits */ 6, { 7, 6, 3, 2, 1, 0 }},
+ { /* 24 Mbits */ 6, { 8, 6, 3, 2, 1, 0 }},
+ { /* 36 Mbits */ 7, { 9, 8, 6, 3, 2, 1, 0 }},
+ { /* 48 Mbits */ 8, {10, 9, 8, 6, 3, 2, 1, 0 }},
+ { /* 54 Mbits */ 9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }}
+};
+
static const struct ieee80211_channel zd_channels[] = {
{ .center_freq = 2412, .hw_value = 1 },
{ .center_freq = 2417, .hw_value = 2 },
@@ -282,7 +310,7 @@ static void zd_op_stop(struct ieee80211_hw *hw)
}
/**
- * tx_status - reports tx status of a packet if required
+ * zd_mac_tx_status - reports tx status of a packet if required
* @hw - a &struct ieee80211_hw pointer
* @skb - a sk-buffer
* @flags: extra flags to set in the TX status info
@@ -295,15 +323,49 @@ static void zd_op_stop(struct ieee80211_hw *hw)
*
* If no status information has been requested, the skb is freed.
*/
-static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
- int ackssi, bool success)
+static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
+ int ackssi, struct tx_status *tx_status)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ int i;
+ int success = 1, retry = 1;
+ int first_idx;
+ const struct tx_retry_rate *retries;
ieee80211_tx_info_clear_status(info);
- if (success)
+ if (tx_status) {
+ success = !tx_status->failure;
+ retry = tx_status->retry + success;
+ }
+
+ if (success) {
+ /* success */
info->flags |= IEEE80211_TX_STAT_ACK;
+ } else {
+ /* failure */
+ info->flags &= ~IEEE80211_TX_STAT_ACK;
+ }
+
+ first_idx = info->status.rates[0].idx;
+ ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+ retries = &zd_retry_rates[first_idx];
+ ZD_ASSERT(0<=retry && retry<=retries->count);
+
+ info->status.rates[0].idx = retries->rate[0];
+ info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
+
+ for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) {
+ info->status.rates[i].idx = retries->rate[i];
+ info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
+ }
+ for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
+ info->status.rates[i].idx = retries->rate[retry-1];
+ info->status.rates[i].count = 1; // (success ? 1:2);
+ }
+ if (i<IEEE80211_TX_MAX_RATES)
+ info->status.rates[i].idx = -1; /* terminate */
+
info->status.ack_signal = ackssi;
ieee80211_tx_status_irqsafe(hw, skb);
}
@@ -316,16 +378,79 @@ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
* transferred. The first frame from the tx queue, will be selected and
* reported as error to the upper layers.
*/
-void zd_mac_tx_failed(struct ieee80211_hw *hw)
+void zd_mac_tx_failed(struct urb *urb)
{
- struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue;
+ struct ieee80211_hw * hw = zd_usb_to_hw(urb->context);
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct sk_buff_head *q = &mac->ack_wait_queue;
struct sk_buff *skb;
+ struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer;
+ unsigned long flags;
+ int success = !tx_status->failure;
+ int retry = tx_status->retry + success;
+ int found = 0;
+ int i, position = 0;
- skb = skb_dequeue(q);
- if (skb == NULL)
- return;
+ q = &mac->ack_wait_queue;
+ spin_lock_irqsave(&q->lock, flags);
+
+ skb_queue_walk(q, skb) {
+ struct ieee80211_hdr *tx_hdr;
+ struct ieee80211_tx_info *info;
+ int first_idx, final_idx;
+ const struct tx_retry_rate *retries;
+ u8 final_rate;
+
+ position ++;
+
+ /* if the hardware reports a failure and we had a 802.11 ACK
+ * pending, then we skip the first skb when searching for a
+ * matching frame */
+ if (tx_status->failure && mac->ack_pending &&
+ skb_queue_is_first(q, skb)) {
+ continue;
+ }
+
+ tx_hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* we skip all frames not matching the reported destination */
+ if (unlikely(memcmp(tx_hdr->addr1, tx_status->mac, ETH_ALEN))) {
+ continue;
+ }
+
+ /* we skip all frames not matching the reported final rate */
- tx_status(hw, skb, 0, 0);
+ info = IEEE80211_SKB_CB(skb);
+ first_idx = info->status.rates[0].idx;
+ ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+ retries = &zd_retry_rates[first_idx];
+ if (retry < 0 || retry > retries->count) {
+ continue;
+ }
+
+ ZD_ASSERT(0<=retry && retry<=retries->count);
+ final_idx = retries->rate[retry-1];
+ final_rate = zd_rates[final_idx].hw_value;
+
+ if (final_rate != tx_status->rate) {
+ continue;
+ }
+
+ found = 1;
+ break;
+ }
+
+ if (found) {
+ for (i=1; i<=position; i++) {
+ skb = __skb_dequeue(q);
+ zd_mac_tx_status(hw, skb,
+ mac->ack_pending ? mac->ack_signal : 0,
+ i == position ? tx_status : NULL);
+ mac->ack_pending = 0;
+ }
+ }
+
+ spin_unlock_irqrestore(&q->lock, flags);
}
/**
@@ -342,18 +467,27 @@ void zd_mac_tx_to_dev(struct sk_buff *skb, int error)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hw *hw = info->rate_driver_data[0];
+ struct zd_mac *mac = zd_hw_mac(hw);
+
+ ieee80211_tx_info_clear_status(info);
skb_pull(skb, sizeof(struct zd_ctrlset));
if (unlikely(error ||
(info->flags & IEEE80211_TX_CTL_NO_ACK))) {
- tx_status(hw, skb, 0, !error);
+ /*
+ * FIXME : do we need to fill in anything ?
+ */
+ ieee80211_tx_status_irqsafe(hw, skb);
} else {
- struct sk_buff_head *q =
- &zd_hw_mac(hw)->ack_wait_queue;
+ struct sk_buff_head *q = &mac->ack_wait_queue;
skb_queue_tail(q, skb);
- while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS)
- zd_mac_tx_failed(hw);
+ while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) {
+ zd_mac_tx_status(hw, skb_dequeue(q),
+ mac->ack_pending ? mac->ack_signal : 0,
+ NULL);
+ mac->ack_pending = 0;
+ }
}
}
@@ -606,27 +740,47 @@ fail:
static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
struct ieee80211_rx_status *stats)
{
+ struct zd_mac *mac = zd_hw_mac(hw);
struct sk_buff *skb;
struct sk_buff_head *q;
unsigned long flags;
+ int found = 0;
+ int i, position = 0;
if (!ieee80211_is_ack(rx_hdr->frame_control))
return 0;
- q = &zd_hw_mac(hw)->ack_wait_queue;
+ q = &mac->ack_wait_queue;
spin_lock_irqsave(&q->lock, flags);
skb_queue_walk(q, skb) {
struct ieee80211_hdr *tx_hdr;
+ position ++;
+
+ if (mac->ack_pending && skb_queue_is_first(q, skb))
+ continue;
+
tx_hdr = (struct ieee80211_hdr *)skb->data;
if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN)))
{
- __skb_unlink(skb, q);
- tx_status(hw, skb, stats->signal, 1);
- goto out;
+ found = 1;
+ break;
}
}
-out:
+
+ if (found) {
+ for (i=1; i<position; i++) {
+ skb = __skb_dequeue(q);
+ zd_mac_tx_status(hw, skb,
+ mac->ack_pending ? mac->ack_signal : 0,
+ NULL);
+ mac->ack_pending = 0;
+ }
+
+ mac->ack_pending = 1;
+ mac->ack_signal = stats->signal;
+ }
+
spin_unlock_irqrestore(&q->lock, flags);
return 1;
}
@@ -709,6 +863,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
skb_reserve(skb, 2);
}
+ /* FIXME : could we avoid this big memcpy ? */
memcpy(skb_put(skb, length), buffer, length);
memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
@@ -999,7 +1154,14 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
hw->queues = 1;
hw->extra_tx_headroom = sizeof(struct zd_ctrlset);
+ /*
+ * Tell mac80211 that we support multi rate retries
+ */
+ hw->max_rates = IEEE80211_TX_MAX_RATES;
+ hw->max_rate_tries = 18; /* 9 rates * 2 retries/rate */
+
skb_queue_head_init(&mac->ack_wait_queue);
+ mac->ack_pending = 0;
zd_chip_init(&mac->chip, hw, intf);
housekeeping_init(mac);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 7c2759118d13..630c298a730e 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -140,6 +140,21 @@ struct rx_status {
#define ZD_RX_CRC16_ERROR 0x40
#define ZD_RX_ERROR 0x80
+struct tx_retry_rate {
+ int count; /* number of valid element in rate[] array */
+ int rate[10]; /* retry rates, described by an index in zd_rates[] */
+};
+
+struct tx_status {
+ u8 type; /* must always be 0x01 : USB_INT_TYPE */
+ u8 id; /* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */
+ u8 rate;
+ u8 pad;
+ u8 mac[ETH_ALEN];
+ u8 retry;
+ u8 failure;
+} __attribute__((packed));
+
enum mac_flags {
MAC_FIXED_CHANNEL = 0x01,
};
@@ -150,7 +165,7 @@ struct housekeeping {
#define ZD_MAC_STATS_BUFFER_SIZE 16
-#define ZD_MAC_MAX_ACK_WAITERS 10
+#define ZD_MAC_MAX_ACK_WAITERS 50
struct zd_mac {
struct zd_chip chip;
@@ -184,6 +199,12 @@ struct zd_mac {
/* whether to pass control frames to stack */
unsigned int pass_ctrl:1;
+
+ /* whether we have received a 802.11 ACK that is pending */
+ unsigned int ack_pending:1;
+
+ /* signal strength of the last 802.11 ACK received */
+ int ack_signal;
};
#define ZD_REGDOMAIN_FCC 0x10
@@ -279,7 +300,7 @@ int zd_mac_preinit_hw(struct ieee80211_hw *hw);
int zd_mac_init_hw(struct ieee80211_hw *hw);
int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
-void zd_mac_tx_failed(struct ieee80211_hw *hw);
+void zd_mac_tx_failed(struct urb *urb);
void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
#ifdef DEBUG
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 23a6a6d4863b..d46f20a57b7d 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -419,7 +419,7 @@ static void int_urb_complete(struct urb *urb)
handle_regs_int(urb);
break;
case USB_INT_ID_RETRY_FAILED:
- zd_mac_tx_failed(zd_usb_to_hw(urb->context));
+ zd_mac_tx_failed(urb);
break;
default:
dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb,
@@ -553,6 +553,8 @@ static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer,
if (length < sizeof(struct rx_length_info)) {
/* It's not a complete packet anyhow. */
+ printk("%s: invalid, small RX packet : %d\n",
+ __func__, length);
return;
}
length_info = (struct rx_length_info *)
OpenPOWER on IntegriCloud