diff options
Diffstat (limited to 'drivers/net')
32 files changed, 63 insertions, 757 deletions
diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 3a8c7532ee0d..a7271e093845 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -102,8 +102,7 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_WD80x3 {wd_probe, 0}, #endif -#if defined(CONFIG_NE2000) || \ - defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */ +#if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */ {ne_probe, 0}, #endif #ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 75dc4d0efb34..6245d92b7a0c 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -150,14 +150,6 @@ err_no_cmd: return -EPERM; } -static const void *bonding_namespace(struct class *cls, - const struct class_attribute *attr) -{ - const struct bond_net *bn = - container_of(attr, struct bond_net, class_attr_bonding_masters); - return bn->net; -} - /* class attribute for bond_masters file. This ends up in /sys/class/net */ static const struct class_attribute class_attr_bonding_masters = { .attr = { @@ -166,7 +158,6 @@ static const struct class_attribute class_attr_bonding_masters = { }, .show = bonding_show_bonds, .store = bonding_store_bonds, - .namespace = bonding_namespace, }; /* @@ -533,8 +524,9 @@ static ssize_t bonding_store_arp_interval(struct device *d, goto out; } if (bond->params.mode == BOND_MODE_ALB || - bond->params.mode == BOND_MODE_TLB) { - pr_info("%s: ARP monitoring cannot be used with ALB/TLB. Only MII monitoring is supported on %s.\n", + bond->params.mode == BOND_MODE_TLB || + bond->params.mode == BOND_MODE_8023AD) { + pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n", bond->dev->name, bond->dev->name); ret = -EINVAL; goto out; @@ -1739,7 +1731,8 @@ int bond_create_sysfs(struct bond_net *bn) bn->class_attr_bonding_masters = class_attr_bonding_masters; sysfs_attr_init(&bn->class_attr_bonding_masters.attr); - ret = netdev_class_create_file(&bn->class_attr_bonding_masters); + ret = netdev_class_create_file_ns(&bn->class_attr_bonding_masters, + bn->net); /* * Permit multiple loads of the module by ignoring failures to * create the bonding_masters sysfs file. Bonding devices @@ -1769,7 +1762,7 @@ int bond_create_sysfs(struct bond_net *bn) */ void bond_destroy_sysfs(struct bond_net *bn) { - netdev_class_remove_file(&bn->class_attr_bonding_masters); + netdev_class_remove_file_ns(&bn->class_attr_bonding_masters, bn->net); } /* diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c index 6aa737a24393..ab506d6cab37 100644 --- a/drivers/net/can/grcan.c +++ b/drivers/net/can/grcan.c @@ -34,10 +34,7 @@ #include <linux/io.h> #include <linux/can/dev.h> #include <linux/spinlock.h> - #include <linux/of_platform.h> -#include <asm/prom.h> - #include <linux/of_irq.h> #include <linux/dma-mapping.h> diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c index 31ad33911167..047accd4ede5 100644 --- a/drivers/net/can/sja1000/sja1000_of_platform.c +++ b/drivers/net/can/sja1000/sja1000_of_platform.c @@ -44,7 +44,6 @@ #include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <asm/prom.h> #include "sja1000.h" diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index becef25fa194..0988811f4e40 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -146,13 +146,6 @@ config PCMCIA_PCNET To compile this driver as a module, choose M here: the module will be called pcnet_cs. If unsure, say N. -config NE_H8300 - tristate "NE2000 compatible support for H8/300" - depends on H8300H_AKI3068NET || H8300H_H8MAX - ---help--- - Say Y here if you want to use the NE2000 compatible - controller on the Renesas H8/300 processor. - config STNIC tristate "National DP83902AV support" depends on SUPERH diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index 588954a79b2a..ff3b31894188 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_HYDRA) += hydra.o 8390.o obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o -obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o obj-$(CONFIG_STNIC) += stnic.o 8390.o diff --git a/drivers/net/ethernet/8390/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c deleted file mode 100644 index 7fc28f2d28a6..000000000000 --- a/drivers/net/ethernet/8390/ne-h8300.c +++ /dev/null @@ -1,684 +0,0 @@ -/* ne-h8300.c: A NE2000 clone on H8/300 driver for linux. */ -/* - original ne.c - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403 - - H8/300 modified - Yoshinori Sato <ysato@users.sourceforge.jp> -*/ - -static const char version1[] = -"ne-h8300.c:v1.00 2004/04/11 ysato\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/jiffies.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#define EI_SHIFT(x) (ei_local->reg_offset[x]) - -#include "8390.h" - -#define DRV_NAME "ne-h8300" - -/* Some defines that people can play with if so inclined. */ - -/* Do we perform extra sanity checks on stuff ? */ -/* #define NE_SANITY_CHECK */ - -/* Do we implement the read before write bugfix ? */ -/* #define NE_RW_BUGFIX */ - -/* Do we have a non std. amount of memory? (in units of 256 byte pages) */ -/* #define PACKETBUF_MEMSIZE 0x40 */ - -/* A zero-terminated list of I/O addresses to be probed at boot. */ - -/* ---- No user-serviceable parts below ---- */ - -static const char version[] = - "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include "lib8390.c" - -#define NE_BASE (dev->base_addr) -#define NE_CMD 0x00 -#define NE_DATAPORT (ei_status.word16?0x20:0x10) /* NatSemi-defined port window offset. */ -#define NE_RESET (ei_status.word16?0x3f:0x1f) /* Issue a read to reset, a write to clear. */ -#define NE_IO_EXTENT (ei_status.word16?0x40:0x20) - -#define NESM_START_PG 0x40 /* First page of TX buffer */ -#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ - -static int ne_probe1(struct net_device *dev, int ioaddr); - -static int ne_open(struct net_device *dev); -static int ne_close(struct net_device *dev); - -static void ne_reset_8390(struct net_device *dev); -static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void ne_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ne_block_output(struct net_device *dev, const int count, - const unsigned char *buf, const int start_page); - - -static u32 reg_offset[16]; - -static int __init init_reg_offset(struct net_device *dev,unsigned long base_addr) -{ - struct ei_device *ei_local = netdev_priv(dev); - int i; - unsigned char bus_width; - - bus_width = *(volatile unsigned char *)ABWCR; - bus_width &= 1 << ((base_addr >> 21) & 7); - - for (i = 0; i < ARRAY_SIZE(reg_offset); i++) - if (bus_width == 0) - reg_offset[i] = i * 2 + 1; - else - reg_offset[i] = i; - - ei_local->reg_offset = reg_offset; - return 0; -} - -static int __initdata h8300_ne_count = 0; -#ifdef CONFIG_H8300H_H8MAX -static unsigned long __initdata h8300_ne_base[] = { 0x800600 }; -static int h8300_ne_irq[] = {EXT_IRQ4}; -#endif -#ifdef CONFIG_H8300H_AKI3068NET -static unsigned long __initdata h8300_ne_base[] = { 0x200000 }; -static int h8300_ne_irq[] = {EXT_IRQ5}; -#endif - -static inline int init_dev(struct net_device *dev) -{ - if (h8300_ne_count < ARRAY_SIZE(h8300_ne_base)) { - dev->base_addr = h8300_ne_base[h8300_ne_count]; - dev->irq = h8300_ne_irq[h8300_ne_count]; - h8300_ne_count++; - return 0; - } else - return -ENODEV; -} - -/* Probe for various non-shared-memory ethercards. - - NEx000-clone boards have a Station Address PROM (SAPROM) in the packet - buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of - the SAPROM, while other supposed NE2000 clones must be detected by their - SA prefix. - - Reading the SAPROM from a word-wide card with the 8390 set in byte-wide - mode results in doubled values, which can be detected and compensated for. - - The probe is also responsible for initializing the card and filling - in the 'dev' and 'ei_status' structures. - - We use the minimum memory size for some ethercard product lines, iff we can't - distinguish models. You can increase the packet buffer size by setting - PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are: - E1010 starts at 0x100 and ends at 0x2000. - E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory") - E2010 starts at 0x100 and ends at 0x4000. - E2010-x starts at 0x100 and ends at 0xffff. */ - -static int __init do_ne_probe(struct net_device *dev) -{ - unsigned int base_addr = dev->base_addr; - - /* First check any supplied i/o locations. User knows best. <cough> */ - if (base_addr > 0x1ff) /* Check a single specified location. */ - return ne_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - return -ENODEV; -} - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, dev); - release_region(dev->base_addr, NE_IO_EXTENT); -} - -#ifndef MODULE -struct net_device * __init ne_probe(int unit) -{ - struct net_device *dev = ____alloc_ei_netdev(0); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (init_dev(dev)) - return ERR_PTR(-ENODEV); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = init_reg_offset(dev, dev->base_addr); - if (err) - goto out; - - err = do_ne_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops ne_netdev_ops = { - .ndo_open = ne_open, - .ndo_stop = ne_close, - - .ndo_start_xmit = __ei_start_xmit, - .ndo_tx_timeout = __ei_tx_timeout, - .ndo_get_stats = __ei_get_stats, - .ndo_set_rx_mode = __ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = __ei_poll, -#endif -}; - -static int __init ne_probe1(struct net_device *dev, int ioaddr) -{ - int i; - unsigned char SA_prom[16]; - int wordlength = 2; - const char *name = NULL; - int start_page, stop_page; - int reg0, ret; - static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); - unsigned char bus_width; - - if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - reg0 = inb_p(ioaddr); - if (reg0 == 0xFF) { - ret = -ENODEV; - goto err_out; - } - - /* Do a preliminary verification that we have a 8390. */ - { - int regd; - outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD); - regd = inb_p(ioaddr + EI_SHIFT(0x0d)); - outb_p(0xff, ioaddr + EI_SHIFT(0x0d)); - outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD); - inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */ - if (inb_p(ioaddr + EN0_COUNTER0) != 0) { - outb_p(reg0, ioaddr + EI_SHIFT(0)); - outb_p(regd, ioaddr + EI_SHIFT(0x0d)); /* Restore the old values. */ - ret = -ENODEV; - goto err_out; - } - } - - if (ei_debug && version_printed++ == 0) - printk(KERN_INFO "%s", version1); - - printk(KERN_INFO "NE*000 ethercard probe at %08x:", ioaddr); - - /* Read the 16 bytes of station address PROM. - We must first initialize registers, similar to NS8390_init(eifdev, 0). - We can't reliably read the SAPROM address without this. - (I learned the hard way!). */ - { - struct {unsigned char value, offset; } program_seq[] = - { - {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ - {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ - {0x00, EN0_RCNTLO}, /* Clear the count regs. */ - {0x00, EN0_RCNTHI}, - {0x00, EN0_IMR}, /* Mask completion irq. */ - {0xFF, EN0_ISR}, - {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ - {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ - {32, EN0_RCNTLO}, - {0x00, EN0_RCNTHI}, - {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ - {0x00, EN0_RSARHI}, - {E8390_RREAD+E8390_START, E8390_CMD}, - }; - - for (i = 0; i < ARRAY_SIZE(program_seq); i++) - outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); - - } - bus_width = *(volatile unsigned char *)ABWCR; - bus_width &= 1 << ((ioaddr >> 21) & 7); - ei_status.word16 = (bus_width == 0); /* temporary setting */ - for(i = 0; i < 16 /*sizeof(SA_prom)*/; i++) { - SA_prom[i] = inb_p(ioaddr + NE_DATAPORT); - inb_p(ioaddr + NE_DATAPORT); /* dummy read */ - } - - start_page = NESM_START_PG; - stop_page = NESM_STOP_PG; - - if (bus_width) - wordlength = 1; - else - outb_p(0x49, ioaddr + EN0_DCFG); - - /* Set up the rest of the parameters. */ - name = (wordlength == 2) ? "NE2000" : "NE1000"; - - if (! dev->irq) { - printk(" failed to detect IRQ line.\n"); - ret = -EAGAIN; - goto err_out; - } - - /* Snarf the interrupt now. There's no point in waiting since we cannot - share and the board will usually be enabled. */ - ret = request_irq(dev->irq, __ei_interrupt, 0, name, dev); - if (ret) { - printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); - goto err_out; - } - - dev->base_addr = ioaddr; - - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = SA_prom[i]; - printk(" %pM\n", dev->dev_addr); - - printk("%s: %s found at %#x, using IRQ %d.\n", - dev->name, name, ioaddr, dev->irq); - - ei_status.name = name; - ei_status.tx_start_page = start_page; - ei_status.stop_page = stop_page; - ei_status.word16 = (wordlength == 2); - - ei_status.rx_start_page = start_page + TX_PAGES; -#ifdef PACKETBUF_MEMSIZE - /* Allow the packet buffer size to be overridden by know-it-alls. */ - ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE; -#endif - - ei_status.reset_8390 = &ne_reset_8390; - ei_status.block_input = &ne_block_input; - ei_status.block_output = &ne_block_output; - ei_status.get_8390_hdr = &ne_get_8390_hdr; - ei_status.priv = 0; - - dev->netdev_ops = &ne_netdev_ops; - - __NS8390_init(dev, 0); - - ret = register_netdev(dev); - if (ret) - goto out_irq; - return 0; -out_irq: - free_irq(dev->irq, dev); -err_out: - release_region(ioaddr, NE_IO_EXTENT); - return ret; -} - -static int ne_open(struct net_device *dev) -{ - __ei_open(dev); - return 0; -} - -static int ne_close(struct net_device *dev) -{ - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - __ei_close(dev); - return 0; -} - -/* Hard reset the card. This used to pause for the same period that a - 8390 reset command required, but that shouldn't be necessary. */ - -static void ne_reset_8390(struct net_device *dev) -{ - unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - - if (ei_debug > 1) - printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies); - - /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ - outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); - - ei_status.txing = 0; - ei_status.dmaing = 0; - - /* This check _should_not_ be necessary, omit eventually. */ - while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) - if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name); - break; - } - outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - struct ei_device *ei_local = netdev_priv(dev); - /* This *shouldn't* happen. If it does, it's the last thing you'll see */ - - if (ei_status.dmaing) - { - printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); - return; - } - - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD); - outb_p(sizeof(struct e8390_pkt_hdr), NE_BASE + EN0_RCNTLO); - outb_p(0, NE_BASE + EN0_RCNTHI); - outb_p(0, NE_BASE + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, NE_BASE + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD); - - if (ei_status.word16) { - int len; - unsigned short *p = (unsigned short *)hdr; - for (len = sizeof(struct e8390_pkt_hdr)>>1; len > 0; len--) - *p++ = inw(NE_BASE + NE_DATAPORT); - } else - insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)); - - outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; - - le16_to_cpus(&hdr->count); -} - -/* Block input and output, similar to the Crynwr packet driver. If you - are porting to a new ethercard, look at the packet driver source for hints. - The NEx000 doesn't share the on-board packet memory -- you have to put - the packet out through the "remote DMA" dataport using outb. */ - -static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - struct ei_device *ei_local = netdev_priv(dev); -#ifdef NE_SANITY_CHECK - int xfer_count = count; -#endif - char *buf = skb->data; - - /* This *shouldn't* happen. If it does, it's the last thing you'll see */ - if (ei_status.dmaing) - { - printk(KERN_EMERG "%s: DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); - return; - } - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD); - outb_p(count & 0xff, NE_BASE + EN0_RCNTLO); - outb_p(count >> 8, NE_BASE + EN0_RCNTHI); - outb_p(ring_offset & 0xff, NE_BASE + EN0_RSARLO); - outb_p(ring_offset >> 8, NE_BASE + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD); - if (ei_status.word16) - { - int len; - unsigned short *p = (unsigned short *)buf; - for (len = count>>1; len > 0; len--) - *p++ = inw(NE_BASE + NE_DATAPORT); - if (count & 0x01) - { - buf[count-1] = inb(NE_BASE + NE_DATAPORT); -#ifdef NE_SANITY_CHECK - xfer_count++; -#endif - } - } else { - insb(NE_BASE + NE_DATAPORT, buf, count); - } - -#ifdef NE_SANITY_CHECK - /* This was for the ALPHA version only, but enough people have - been encountering problems so it is still here. If you see - this message you either 1) have a slightly incompatible clone - or 2) have noise/speed problems with your bus. */ - - if (ei_debug > 1) - { - /* DMA termination address check... */ - int addr, tries = 20; - do { - /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here - -- it's broken for Rx on some cards! */ - int high = inb_p(NE_BASE + EN0_RSARHI); - int low = inb_p(NE_BASE + EN0_RSARLO); - addr = (high << 8) + low; - if (((ring_offset + xfer_count) & 0xff) == low) - break; - } while (--tries > 0); - if (tries <= 0) - printk(KERN_WARNING "%s: RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); - } -#endif - outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - -static void ne_block_output(struct net_device *dev, int count, - const unsigned char *buf, const int start_page) -{ - struct ei_device *ei_local = netdev_priv(dev); - unsigned long dma_start; -#ifdef NE_SANITY_CHECK - int retries = 0; -#endif - - /* Round the count up for word writes. Do we need to do this? - What effect will an odd byte count have on the 8390? - I should check someday. */ - - if (ei_status.word16 && (count & 0x01)) - count++; - - /* This *shouldn't* happen. If it does, it's the last thing you'll see */ - if (ei_status.dmaing) - { - printk(KERN_EMERG "%s: DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); - return; - } - ei_status.dmaing |= 0x01; - /* We should already be in page 0, but to be safe... */ - outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, NE_BASE + NE_CMD); - -#ifdef NE_SANITY_CHECK -retry: -#endif - -#ifdef NE8390_RW_BUGFIX - /* Handle the read-before-write bug the same way as the - Crynwr packet driver -- the NatSemi method doesn't work. - Actually this doesn't always work either, but if you have - problems with your NEx000 this is better than nothing! */ - - outb_p(0x42, NE_BASE + EN0_RCNTLO); - outb_p(0x00, NE_BASE + EN0_RCNTHI); - outb_p(0x42, NE_BASE + EN0_RSARLO); - outb_p(0x00, NE_BASE + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD); - /* Make certain that the dummy read has occurred. */ - udelay(6); -#endif - - outb_p(ENISR_RDC, NE_BASE + EN0_ISR); - - /* Now the normal output. */ - outb_p(count & 0xff, NE_BASE + EN0_RCNTLO); - outb_p(count >> 8, NE_BASE + EN0_RCNTHI); - outb_p(0x00, NE_BASE + EN0_RSARLO); - outb_p(start_page, NE_BASE + EN0_RSARHI); - - outb_p(E8390_RWRITE+E8390_START, NE_BASE + NE_CMD); - if (ei_status.word16) { - int len; - unsigned short *p = (unsigned short *)buf; - for (len = count>>1; len > 0; len--) - outw(*p++, NE_BASE + NE_DATAPORT); - } else { - outsb(NE_BASE + NE_DATAPORT, buf, count); - } - - dma_start = jiffies; - -#ifdef NE_SANITY_CHECK - /* This was for the ALPHA version only, but enough people have - been encountering problems so it is still here. */ - - if (ei_debug > 1) - { - /* DMA termination address check... */ - int addr, tries = 20; - do { - int high = inb_p(NE_BASE + EN0_RSARHI); - int low = inb_p(NE_BASE + EN0_RSARLO); - addr = (high << 8) + low; - if ((start_page << 8) + count == addr) - break; - } while (--tries > 0); - - if (tries <= 0) - { - printk(KERN_WARNING "%s: Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, (start_page << 8) + count, addr); - if (retries++ == 0) - goto retry; - } - } -#endif - - while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0) - if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); - ne_reset_8390(dev); - __NS8390_init(dev,1); - break; - } - - outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - - -#ifdef MODULE -#define MAX_NE_CARDS 1 /* Max number of NE cards per module */ -static struct net_device *dev_ne[MAX_NE_CARDS]; -static int io[MAX_NE_CARDS]; -static int irq[MAX_NE_CARDS]; -static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */ - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(bad, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_DESCRIPTION("H8/300 NE2000 Ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that no ISA autoprobe takes place. We can't guarantee -that the ne2k probe is the last 8390 based probe to take place (as it -is at boot) and so the probe will get confused by any other 8390 cards. -ISA device autoprobes on a running machine are not recommended anyway. */ - -int init_module(void) -{ - int this_dev, found = 0; - int err; - - for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { - struct net_device *dev = ____alloc_ei_netdev(0); - if (!dev) - break; - if (io[this_dev]) { - dev->irq = irq[this_dev]; - dev->mem_end = bad[this_dev]; - dev->base_addr = io[this_dev]; - } else { - dev->base_addr = h8300_ne_base[this_dev]; - dev->irq = h8300_ne_irq[this_dev]; - } - err = init_reg_offset(dev, dev->base_addr); - if (!err) { - if (do_ne_probe(dev) == 0) { - dev_ne[found++] = dev; - continue; - } - } - free_netdev(dev); - if (found) - break; - if (io[this_dev] != 0) - printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", dev->base_addr); - else - printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n"); - return -ENXIO; - } - if (found) - return 0; - return -ENODEV; -} - -void cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { - struct net_device *dev = dev_ne[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c index cc35f6f4e703..57397295887c 100644 --- a/drivers/net/ethernet/amd/declance.c +++ b/drivers/net/ethernet/amd/declance.c @@ -725,7 +725,6 @@ static irqreturn_t lance_dma_merr_int(int irq, void *dev_id) { struct net_device *dev = dev_id; - clear_ioasic_dma_irq(irq); printk(KERN_ERR "%s: DMA error\n", dev->name); return IRQ_HANDLED; } @@ -812,7 +811,7 @@ static int lance_open(struct net_device *dev) if (lp->dma_irq >= 0) { unsigned long flags; - if (request_irq(lp->dma_irq, lance_dma_merr_int, 0, + if (request_irq(lp->dma_irq, lance_dma_merr_int, IRQF_ONESHOT, "lance error", dev)) { free_irq(dev->irq, dev); printk("%s: Can't get DMA IRQ %d\n", dev->name, diff --git a/drivers/net/ethernet/apple/macmace.c b/drivers/net/ethernet/apple/macmace.c index 4ce8ceb62205..58a200df4c35 100644 --- a/drivers/net/ethernet/apple/macmace.c +++ b/drivers/net/ethernet/apple/macmace.c @@ -211,6 +211,7 @@ static int mace_probe(struct platform_device *pdev) mp = netdev_priv(dev); mp->device = &pdev->dev; + platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); dev->base_addr = (u32)MACE_BASE; diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index d818ded6c05c..b2ffad1304d2 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -628,12 +628,12 @@ static const struct net_device_ops arc_emac_netdev_ops = { static int arc_emac_probe(struct platform_device *pdev) { - struct resource res_regs, res_irq; + struct resource res_regs; struct device_node *phy_node; struct arc_emac_priv *priv; struct net_device *ndev; const char *mac_addr; - unsigned int id, clock_frequency; + unsigned int id, clock_frequency, irq; int err; if (!pdev->dev.of_node) @@ -661,8 +661,8 @@ static int arc_emac_probe(struct platform_device *pdev) } /* Get IRQ from device tree */ - err = of_irq_to_resource(pdev->dev.of_node, 0, &res_irq); - if (!err) { + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (!irq) { dev_err(&pdev->dev, "failed to retrieve <irq> value from device tree\n"); return -ENODEV; } @@ -671,6 +671,7 @@ static int arc_emac_probe(struct platform_device *pdev) if (!ndev) return -ENOMEM; + platform_set_drvdata(pdev, ndev); SET_NETDEV_DEV(ndev, &pdev->dev); ndev->netdev_ops = &arc_emac_netdev_ops; @@ -711,7 +712,7 @@ static int arc_emac_probe(struct platform_device *pdev) goto out; } - ndev->irq = res_irq.start; + ndev->irq = irq; dev_info(&pdev->dev, "IRQ is %d\n", ndev->irq); /* Register interrupt handler for device */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 9fbeee522d2c..32c92abf5094 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -1217,9 +1217,6 @@ static void bnx2x_set_one_vlan_mac_e1h(struct bnx2x *bp, ETH_VLAN_FILTER_CLASSIFY, config); } -#define list_next_entry(pos, member) \ - list_entry((pos)->member.next, typeof(*(pos)), member) - /** * bnx2x_vlan_mac_restore - reconfigure next MAC/VLAN/VLAN-MAC element * diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c index 7583a9572bcc..f8b92864fc52 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c +++ b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c @@ -32,7 +32,9 @@ #include <linux/fs.h> #include <linux/platform_device.h> #include <linux/phy.h> +#include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/gfp.h> #include <asm/immap_cpm2.h> @@ -88,7 +90,7 @@ static int do_pd_setup(struct fs_enet_private *fep) struct fs_platform_info *fpi = fep->fpi; int ret = -EINVAL; - fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL); + fep->interrupt = irq_of_parse_and_map(ofdev->dev.of_node, 0); if (fep->interrupt == NO_IRQ) goto out; diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c index 9ae6cdbcac2e..a9a00f39521a 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c +++ b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c @@ -31,7 +31,9 @@ #include <linux/bitops.h> #include <linux/fs.h> #include <linux/platform_device.h> +#include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/gfp.h> #include <asm/irq.h> @@ -98,7 +100,7 @@ static int do_pd_setup(struct fs_enet_private *fep) { struct platform_device *ofdev = to_platform_device(fep->dev); - fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL); + fep->interrupt = irq_of_parse_and_map(ofdev->dev.of_node, 0); if (fep->interrupt == NO_IRQ) return -EINVAL; diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c index 22a02a767069..d37cd4ebac65 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c +++ b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c @@ -31,6 +31,8 @@ #include <linux/bitops.h> #include <linux/fs.h> #include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/irq.h> @@ -98,7 +100,7 @@ static int do_pd_setup(struct fs_enet_private *fep) { struct platform_device *ofdev = to_platform_device(fep->dev); - fep->interrupt = of_irq_to_resource(ofdev->dev.of_node, 0, NULL); + fep->interrupt = irq_of_parse_and_map(ofdev->dev.of_node, 0); if (fep->interrupt == NO_IRQ) return -EINVAL; diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c index 844ecfa84d17..67caaacd19ec 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c @@ -22,6 +22,7 @@ #include <linux/mii.h> #include <linux/platform_device.h> #include <linux/mdio-bitbang.h> +#include <linux/of_address.h> #include <linux/of_mdio.h> #include <linux/of_platform.h> diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c index 2f1c46a12f05..ac5d447ff8c4 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c @@ -31,6 +31,7 @@ #include <linux/ethtool.h> #include <linux/bitops.h> #include <linux/platform_device.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <asm/pgtable.h> diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index d6d810cb97c7..b14d7904a075 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -78,6 +78,8 @@ #include <linux/if_vlan.h> #include <linux/spinlock.h> #include <linux/mm.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_mdio.h> #include <linux/of_platform.h> #include <linux/ip.h> diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index d58a3dfc95c2..5548b6d00c31 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -31,6 +31,8 @@ #include <linux/mii.h> #include <linux/phy.h> #include <linux/workqueue.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/of_platform.h> diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c index c1b6e7e31aac..d449fcb90199 100644 --- a/drivers/net/ethernet/freescale/xgmac_mdio.c +++ b/drivers/net/ethernet/freescale/xgmac_mdio.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/phy.h> #include <linux/mdio.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/of_mdio.h> diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index ef21a2e10180..ae342fdb42c8 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -39,6 +39,8 @@ #include <linux/bitops.h> #include <linux/workqueue.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_net.h> #include <linux/slab.h> diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c index e7847510eda2..9d75fef6396f 100644 --- a/drivers/net/ethernet/ibm/emac/mal.c +++ b/drivers/net/ethernet/ibm/emac/mal.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/slab.h> +#include <linux/of_irq.h> #include "core.h" #include <asm/dcr-regs.h> diff --git a/drivers/net/ethernet/ibm/emac/rgmii.c b/drivers/net/ethernet/ibm/emac/rgmii.c index c47e23d6eeaa..4fb2f96da23b 100644 --- a/drivers/net/ethernet/ibm/emac/rgmii.c +++ b/drivers/net/ethernet/ibm/emac/rgmii.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/ethtool.h> +#include <linux/of_address.h> #include <asm/io.h> #include "emac.h" diff --git a/drivers/net/ethernet/ibm/emac/tah.c b/drivers/net/ethernet/ibm/emac/tah.c index c231a4a32c4d..9f24769ed826 100644 --- a/drivers/net/ethernet/ibm/emac/tah.c +++ b/drivers/net/ethernet/ibm/emac/tah.c @@ -18,6 +18,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include <linux/of_address.h> #include <asm/io.h> #include "emac.h" diff --git a/drivers/net/ethernet/ibm/emac/zmii.c b/drivers/net/ethernet/ibm/emac/zmii.c index 4cdf286f7ee3..9ca67a38c062 100644 --- a/drivers/net/ethernet/ibm/emac/zmii.c +++ b/drivers/net/ethernet/ibm/emac/zmii.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/ethtool.h> +#include <linux/of_address.h> #include <asm/io.h> #include "emac.h" diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 00cd36e08601..61088a6a9424 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2890,7 +2890,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev) PHY_INTERFACE_MODE_GMII); if (!mp->phy) err = -ENODEV; - phy_addr_set(mp, mp->phy->addr); + else + phy_addr_set(mp, mp->phy->addr); } else if (pd->phy_addr != MV643XX_ETH_PHY_NONE) { mp->phy = phy_scan(mp, pd->phy_addr); diff --git a/drivers/net/ethernet/natsemi/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c index 4da172ac5599..7007d212f3e4 100644 --- a/drivers/net/ethernet/natsemi/xtsonic.c +++ b/drivers/net/ethernet/natsemi/xtsonic.c @@ -264,6 +264,7 @@ int xtsonic_probe(struct platform_device *pdev) lp = netdev_priv(dev); lp->device = &pdev->dev; + platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); netdev_boot_setup_check(dev); diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c index 4092fed47e2f..67d9fdeedd86 100644 --- a/drivers/net/ethernet/smsc/smc9194.c +++ b/drivers/net/ethernet/smsc/smc9194.c @@ -95,14 +95,6 @@ static const char version[] = #define USE_32_BIT 1 #endif -#if defined(__H8300H__) || defined(__H8300S__) -#define NO_AUTOPROBE -#undef insl -#undef outsl -#define insl(a,b,l) io_insl_noswap(a,b,l) -#define outsl(a,b,l) io_outsl_noswap(a,b,l) -#endif - /* .the SMC9194 can be at any of the following port addresses. To change, .for a slightly different card, you can add it to the array. Keep in @@ -114,12 +106,6 @@ struct devlist { unsigned int irq; }; -#if defined(CONFIG_H8S_EDOSK2674) -static struct devlist smc_devlist[] __initdata = { - {.port = 0xf80000, .irq = 16}, - {.port = 0, .irq = 0 }, -}; -#else static struct devlist smc_devlist[] __initdata = { {.port = 0x200, .irq = 0}, {.port = 0x220, .irq = 0}, @@ -139,7 +125,6 @@ static struct devlist smc_devlist[] __initdata = { {.port = 0x3E0, .irq = 0}, {.port = 0, .irq = 0}, }; -#endif /* . Wait time for memory to be free. This probably shouldn't be . tuned that much, as waiting for this means nothing else happens @@ -651,11 +636,7 @@ static void smc_hardware_send_packet( struct net_device * dev ) #ifdef USE_32_BIT if ( length & 0x2 ) { outsl(ioaddr + DATA_1, buf, length >> 2 ); -#if !defined(__H8300H__) && !defined(__H8300S__) outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1); -#else - ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1); -#endif } else outsl(ioaddr + DATA_1, buf, length >> 2 ); @@ -898,7 +879,6 @@ static int __init smc_probe(struct net_device *dev, int ioaddr) retval = -ENODEV; goto err_out; } -#if !defined(CONFIG_H8S_EDOSK2674) /* well, we've already written once, so hopefully another time won't hurt. This time, I need to switch the bank register to bank 1, so I can access the base address register */ @@ -913,10 +893,6 @@ static int __init smc_probe(struct net_device *dev, int ioaddr) retval = -ENODEV; goto err_out; } -#else - (void)base_address_register; /* Warning suppression */ -#endif - /* check if the revision register is something that I recognize. These might need to be added to later, as future revisions diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 0029148077a9..1f2364126323 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -36,6 +36,7 @@ #include <linux/netdevice.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/of_mdio.h> #include <linux/of_platform.h> #include <linux/of_address.h> diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index dc920974204e..56178761ce93 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -438,17 +438,19 @@ phy_id_show(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id); } +static DEVICE_ATTR_RO(phy_id); -static struct device_attribute mdio_dev_attrs[] = { - __ATTR_RO(phy_id), - __ATTR_NULL +static struct attribute *mdio_dev_attrs[] = { + &dev_attr_phy_id.attr, + NULL, }; +ATTRIBUTE_GROUPS(mdio_dev); struct bus_type mdio_bus_type = { .name = "mdio_bus", .match = mdio_bus_match, .pm = MDIO_BUS_PM_OPS, - .dev_attrs = mdio_dev_attrs, + .dev_groups = mdio_dev_groups, }; EXPORT_SYMBOL(mdio_bus_type); diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 138de837977f..fa1d69a38ccf 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -64,6 +64,18 @@ static int rtl8211e_config_intr(struct phy_device *phydev) return err; } +/* RTL8201CP */ +static struct phy_driver rtl8201cp_driver = { + .phy_id = 0x00008201, + .name = "RTL8201CP Ethernet", + .phy_id_mask = 0x0000ffff, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + /* RTL8211B */ static struct phy_driver rtl8211b_driver = { .phy_id = 0x001cc912, @@ -98,6 +110,9 @@ static int __init realtek_init(void) { int ret; + ret = phy_driver_register(&rtl8201cp_driver); + if (ret < 0) + return -ENODEV; ret = phy_driver_register(&rtl8211b_driver); if (ret < 0) return -ENODEV; diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index f74786aa37be..e15ec2b12035 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -66,7 +66,7 @@ static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx); static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer); static struct usb_driver cdc_ncm_driver; -static u8 cdc_ncm_setup(struct usbnet *dev) +static int cdc_ncm_setup(struct usbnet *dev) { struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; struct usb_cdc_ncm_ntb_parameters ncm_parm; diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 90a429b7ebad..8494bb53ebdc 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -204,9 +204,6 @@ static void intr_complete (struct urb *urb) break; } - if (!netif_running (dev->net)) - return; - status = usb_submit_urb (urb, GFP_ATOMIC); if (status != 0) netif_err(dev, timer, dev->net, |
