diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1251.c')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1251.c | 709 |
1 files changed, 0 insertions, 709 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c deleted file mode 100644 index ce1561a41fa4..000000000000 --- a/drivers/net/wireless/wl12xx/wl1251.c +++ /dev/null @@ -1,709 +0,0 @@ -/* - * This file is part of wl12xx - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Kalle Valo <kalle.valo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include "wl1251.h" -#include "reg.h" -#include "spi.h" -#include "boot.h" -#include "event.h" -#include "acx.h" -#include "tx.h" -#include "rx.h" -#include "ps.h" -#include "init.h" - -static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = { - [PART_DOWN] = { - .mem = { - .start = 0x00000000, - .size = 0x00016800 - }, - .reg = { - .start = REGISTERS_BASE, - .size = REGISTERS_DOWN_SIZE - }, - }, - - [PART_WORK] = { - .mem = { - .start = 0x00028000, - .size = 0x00014000 - }, - .reg = { - .start = REGISTERS_BASE, - .size = REGISTERS_WORK_SIZE - }, - }, - - /* WL1251 doesn't use the DRPW partition, so we don't set it here */ -}; - -static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = { - [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474), - [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478), - [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494), - [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498), - [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C), - [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0), - [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4), - [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8), - [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000), - [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C), - [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804) -}; - -static int wl1251_upload_firmware(struct wl12xx *wl) -{ - struct wl12xx_partition_set *p_table = wl->chip.p_table; - int addr, chunk_num, partition_limit; - size_t fw_data_len; - u8 *p; - - /* whal_FwCtrl_LoadFwImageSm() */ - - wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x", - wl12xx_reg_read32(wl, CHIP_ID_B)); - - /* 10.0 check firmware length and set partition */ - fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) | - (wl->fw[6] << 8) | (wl->fw[7]); - - wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len, - CHUNK_SIZE); - - if ((fw_data_len % 4) != 0) { - wl12xx_error("firmware length not multiple of four"); - return -EIO; - } - - wl12xx_set_partition(wl, - p_table[PART_DOWN].mem.start, - p_table[PART_DOWN].mem.size, - p_table[PART_DOWN].reg.start, - p_table[PART_DOWN].reg.size); - - /* 10.1 set partition limit and chunk num */ - chunk_num = 0; - partition_limit = p_table[PART_DOWN].mem.size; - - while (chunk_num < fw_data_len / CHUNK_SIZE) { - /* 10.2 update partition, if needed */ - addr = p_table[PART_DOWN].mem.start + - (chunk_num + 2) * CHUNK_SIZE; - if (addr > partition_limit) { - addr = p_table[PART_DOWN].mem.start + - chunk_num * CHUNK_SIZE; - partition_limit = chunk_num * CHUNK_SIZE + - p_table[PART_DOWN].mem.size; - wl12xx_set_partition(wl, - addr, - p_table[PART_DOWN].mem.size, - p_table[PART_DOWN].reg.start, - p_table[PART_DOWN].reg.size); - } - - /* 10.3 upload the chunk */ - addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; - p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; - wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", - p, addr); - wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE); - - chunk_num++; - } - - /* 10.4 upload the last chunk */ - addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; - p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; - wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x", - fw_data_len % CHUNK_SIZE, p, addr); - wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE); - - return 0; -} - -static int wl1251_upload_nvs(struct wl12xx *wl) -{ - size_t nvs_len, nvs_bytes_written, burst_len; - int nvs_start, i; - u32 dest_addr, val; - u8 *nvs_ptr, *nvs; - - nvs = wl->nvs; - if (nvs == NULL) - return -ENODEV; - - nvs_ptr = nvs; - - nvs_len = wl->nvs_len; - nvs_start = wl->fw_len; - - /* - * Layout before the actual NVS tables: - * 1 byte : burst length. - * 2 bytes: destination address. - * n bytes: data to burst copy. - * - * This is ended by a 0 length, then the NVS tables. - */ - - while (nvs_ptr[0]) { - burst_len = nvs_ptr[0]; - dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); - - /* We move our pointer to the data */ - nvs_ptr += 3; - - for (i = 0; i < burst_len; i++) { - val = (nvs_ptr[0] | (nvs_ptr[1] << 8) - | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); - - wl12xx_debug(DEBUG_BOOT, - "nvs burst write 0x%x: 0x%x", - dest_addr, val); - wl12xx_mem_write32(wl, dest_addr, val); - - nvs_ptr += 4; - dest_addr += 4; - } - } - - /* - * We've reached the first zero length, the first NVS table - * is 7 bytes further. - */ - nvs_ptr += 7; - nvs_len -= nvs_ptr - nvs; - nvs_len = ALIGN(nvs_len, 4); - - /* Now we must set the partition correctly */ - wl12xx_set_partition(wl, nvs_start, - wl->chip.p_table[PART_DOWN].mem.size, - wl->chip.p_table[PART_DOWN].reg.start, - wl->chip.p_table[PART_DOWN].reg.size); - - /* And finally we upload the NVS tables */ - nvs_bytes_written = 0; - while (nvs_bytes_written < nvs_len) { - val = (nvs_ptr[0] | (nvs_ptr[1] << 8) - | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); - - val = cpu_to_le32(val); - - wl12xx_debug(DEBUG_BOOT, - "nvs write table 0x%x: 0x%x", - nvs_start, val); - wl12xx_mem_write32(wl, nvs_start, val); - - nvs_ptr += 4; - nvs_bytes_written += 4; - nvs_start += 4; - } - - return 0; -} - -static int wl1251_boot(struct wl12xx *wl) -{ - int ret = 0, minor_minor_e2_ver; - u32 tmp, boot_data; - - ret = wl12xx_boot_soft_reset(wl); - if (ret < 0) - goto out; - - /* 2. start processing NVS file */ - ret = wl->chip.op_upload_nvs(wl); - if (ret < 0) - goto out; - - /* write firmware's last address (ie. it's length) to - * ACX_EEPROMLESS_IND_REG */ - wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len); - - /* 6. read the EEPROM parameters */ - tmp = wl12xx_reg_read32(wl, SCR_PAD2); - - /* 7. read bootdata */ - wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8; - wl->boot_attr.major = (tmp & 0x00FF0000) >> 16; - tmp = wl12xx_reg_read32(wl, SCR_PAD3); - - /* 8. check bootdata and call restart sequence */ - wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16; - minor_minor_e2_ver = (tmp & 0xFF000000) >> 24; - - wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x " - "minorE2Ver 0x%x minor_minor_e2_ver 0x%x", - wl->boot_attr.radio_type, wl->boot_attr.major, - wl->boot_attr.minor, minor_minor_e2_ver); - - ret = wl12xx_boot_init_seq(wl); - if (ret < 0) - goto out; - - /* 9. NVS processing done */ - boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); - - wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data); - - /* 10. check that ECPU_CONTROL_HALT bits are set in - * pWhalBus->uBootData and start uploading firmware - */ - if ((boot_data & ECPU_CONTROL_HALT) == 0) { - wl12xx_error("boot failed, ECPU_CONTROL_HALT not set"); - ret = -EIO; - goto out; - } - - ret = wl->chip.op_upload_fw(wl); - if (ret < 0) - goto out; - - /* 10.5 start firmware */ - ret = wl12xx_boot_run_firmware(wl); - if (ret < 0) - goto out; - - /* Get and save the firmware version */ - wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver)); - -out: - return ret; -} - -static int wl1251_mem_cfg(struct wl12xx *wl) -{ - struct wl1251_acx_config_memory mem_conf; - int ret, i; - - wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg"); - - /* memory config */ - mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS); - mem_conf.mem_config.rx_mem_block_num = 35; - mem_conf.mem_config.tx_min_mem_block_num = 64; - mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES; - mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING; - mem_conf.mem_config.num_ssid_profiles = 1; - mem_conf.mem_config.debug_buffer_size = - cpu_to_le16(TRACE_BUFFER_MAX_SIZE); - - /* RX queue config */ - mem_conf.rx_queue_config.dma_address = 0; - mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF; - mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY; - mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE; - - /* TX queue config */ - for (i = 0; i < MAX_TX_QUEUES; i++) { - mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF; - mem_conf.tx_queue_config[i].attributes = i; - } - - mem_conf.header.id = ACX_MEM_CFG; - mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) - - sizeof(struct acx_header); - mem_conf.header.len -= - (MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) * - sizeof(struct wl1251_acx_tx_queue_config); - - ret = wl12xx_cmd_configure(wl, &mem_conf, - sizeof(struct wl1251_acx_config_memory)); - if (ret < 0) - wl12xx_warning("wl1251 mem config failed: %d", ret); - - return ret; -} - -static int wl1251_hw_init_mem_config(struct wl12xx *wl) -{ - int ret; - - ret = wl1251_mem_cfg(wl); - if (ret < 0) - return ret; - - wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map), - GFP_KERNEL); - if (!wl->target_mem_map) { - wl12xx_error("couldn't allocate target memory map"); - return -ENOMEM; - } - - /* we now ask for the firmware built memory map */ - ret = wl12xx_acx_mem_map(wl, wl->target_mem_map, - sizeof(struct wl1251_acx_mem_map)); - if (ret < 0) { - wl12xx_error("couldn't retrieve firmware memory map"); - kfree(wl->target_mem_map); - wl->target_mem_map = NULL; - return ret; - } - - return 0; -} - -static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag) -{ - u32 cpu_ctrl; - - /* 10.5.0 run the firmware (I) */ - cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); - - /* 10.5.1 run the firmware (II) */ - cpu_ctrl &= ~flag; - wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); -} - -static void wl1251_target_enable_interrupts(struct wl12xx *wl) -{ - /* Enable target's interrupts */ - wl->intr_mask = WL1251_ACX_INTR_RX0_DATA | - WL1251_ACX_INTR_RX1_DATA | - WL1251_ACX_INTR_TX_RESULT | - WL1251_ACX_INTR_EVENT_A | - WL1251_ACX_INTR_EVENT_B | - WL1251_ACX_INTR_INIT_COMPLETE; - wl12xx_boot_target_enable_interrupts(wl); -} - -static void wl1251_irq_work(struct work_struct *work) -{ - u32 intr; - struct wl12xx *wl = - container_of(work, struct wl12xx, irq_work); - - mutex_lock(&wl->mutex); - - wl12xx_debug(DEBUG_IRQ, "IRQ work"); - - if (wl->state == WL12XX_STATE_OFF) - goto out; - - wl12xx_ps_elp_wakeup(wl); - - wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL); - - intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); - wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr); - - if (wl->data_path) { - wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr, - &wl->rx_counter, sizeof(u32)); - - /* We handle a frmware bug here */ - switch ((wl->rx_counter - wl->rx_handled) & 0xf) { - case 0: - wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync"); - intr &= ~WL1251_ACX_INTR_RX0_DATA; - intr &= ~WL1251_ACX_INTR_RX1_DATA; - break; - case 1: - wl12xx_debug(DEBUG_IRQ, "RX: FW +1"); - intr |= WL1251_ACX_INTR_RX0_DATA; - intr &= ~WL1251_ACX_INTR_RX1_DATA; - break; - case 2: - wl12xx_debug(DEBUG_IRQ, "RX: FW +2"); - intr |= WL1251_ACX_INTR_RX0_DATA; - intr |= WL1251_ACX_INTR_RX1_DATA; - break; - default: - wl12xx_warning("RX: FW and host out of sync: %d", - wl->rx_counter - wl->rx_handled); - break; - } - - wl->rx_handled = wl->rx_counter; - - - wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter); - } - - intr &= wl->intr_mask; - - if (intr == 0) { - wl12xx_debug(DEBUG_IRQ, "INTR is 0"); - wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, - ~(wl->intr_mask)); - - goto out_sleep; - } - - if (intr & WL1251_ACX_INTR_RX0_DATA) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA"); - wl12xx_rx(wl); - } - - if (intr & WL1251_ACX_INTR_RX1_DATA) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA"); - wl12xx_rx(wl); - } - - if (intr & WL1251_ACX_INTR_TX_RESULT) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT"); - wl12xx_tx_complete(wl); - } - - if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr); - if (intr & WL1251_ACX_INTR_EVENT_A) - wl12xx_event_handle(wl, 0); - else - wl12xx_event_handle(wl, 1); - } - - if (intr & WL1251_ACX_INTR_INIT_COMPLETE) - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE"); - - wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); - -out_sleep: - wl12xx_ps_elp_sleep(wl); -out: - mutex_unlock(&wl->mutex); -} - -static int wl1251_hw_init_txq_fill(u8 qid, - struct acx_tx_queue_qos_config *config, - u32 num_blocks) -{ - config->qid = qid; - - switch (qid) { - case QOS_AC_BE: - config->high_threshold = - (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_BE_DEF * num_blocks) / 100; - break; - case QOS_AC_BK: - config->high_threshold = - (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_BK_DEF * num_blocks) / 100; - break; - case QOS_AC_VI: - config->high_threshold = - (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_VI_DEF * num_blocks) / 100; - break; - case QOS_AC_VO: - config->high_threshold = - (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_VO_DEF * num_blocks) / 100; - break; - default: - wl12xx_error("Invalid TX queue id: %d", qid); - return -EINVAL; - } - - return 0; -} - -static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl) -{ - struct acx_tx_queue_qos_config config; - struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; - int ret, i; - - wl12xx_debug(DEBUG_ACX, "acx tx queue config"); - - config.header.id = ACX_TX_QUEUE_CFG; - config.header.len = sizeof(struct acx_tx_queue_qos_config) - - sizeof(struct acx_header); - - for (i = 0; i < MAX_NUM_OF_AC; i++) { - ret = wl1251_hw_init_txq_fill(i, &config, - wl_mem_map->num_tx_mem_blocks); - if (ret < 0) - return ret; - - ret = wl12xx_cmd_configure(wl, &config, sizeof(config)); - if (ret < 0) - return ret; - } - - return 0; -} - -static int wl1251_hw_init_data_path_config(struct wl12xx *wl) -{ - int ret; - - /* asking for the data path parameters */ - wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp), - GFP_KERNEL); - if (!wl->data_path) { - wl12xx_error("Couldnt allocate data path parameters"); - return -ENOMEM; - } - - ret = wl12xx_acx_data_path_params(wl, wl->data_path); - if (ret < 0) { - kfree(wl->data_path); - wl->data_path = NULL; - return ret; - } - - return 0; -} - -static int wl1251_hw_init(struct wl12xx *wl) -{ - struct wl1251_acx_mem_map *wl_mem_map; - int ret; - - ret = wl12xx_hw_init_hwenc_config(wl); - if (ret < 0) - return ret; - - /* Template settings */ - ret = wl12xx_hw_init_templates_config(wl); - if (ret < 0) - return ret; - - /* Default memory configuration */ - ret = wl1251_hw_init_mem_config(wl); - if (ret < 0) - return ret; - - /* Default data path configuration */ - ret = wl1251_hw_init_data_path_config(wl); - if (ret < 0) - goto out_free_memmap; - - /* RX config */ - ret = wl12xx_hw_init_rx_config(wl, - RX_CFG_PROMISCUOUS | RX_CFG_TSF, - RX_FILTER_OPTION_DEF); - /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, - RX_FILTER_OPTION_FILTER_ALL); */ - if (ret < 0) - goto out_free_data_path; - - /* TX queues config */ - ret = wl1251_hw_init_tx_queue_config(wl); - if (ret < 0) - goto out_free_data_path; - - /* PHY layer config */ - ret = wl12xx_hw_init_phy_config(wl); - if (ret < 0) - goto out_free_data_path; - - /* Beacon filtering */ - ret = wl12xx_hw_init_beacon_filter(wl); - if (ret < 0) - goto out_free_data_path; - - /* Bluetooth WLAN coexistence */ - ret = wl12xx_hw_init_pta(wl); - if (ret < 0) - goto out_free_data_path; - - /* Energy detection */ - ret = wl12xx_hw_init_energy_detection(wl); - if (ret < 0) - goto out_free_data_path; - - /* Beacons and boradcast settings */ - ret = wl12xx_hw_init_beacon_broadcast(wl); - if (ret < 0) - goto out_free_data_path; - - /* Enable data path */ - ret = wl12xx_cmd_data_path(wl, wl->channel, 1); - if (ret < 0) - goto out_free_data_path; - - /* Default power state */ - ret = wl12xx_hw_init_power_auth(wl); - if (ret < 0) - goto out_free_data_path; - - wl_mem_map = wl->target_mem_map; - wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", - wl_mem_map->num_tx_mem_blocks, - wl->data_path->tx_control_addr, - wl_mem_map->num_rx_mem_blocks, - wl->data_path->rx_control_addr); - - return 0; - - out_free_data_path: - kfree(wl->data_path); - - out_free_memmap: - kfree(wl->target_mem_map); - - return ret; -} - -static int wl1251_plt_init(struct wl12xx *wl) -{ - int ret; - - ret = wl1251_hw_init_mem_config(wl); - if (ret < 0) - return ret; - - ret = wl12xx_cmd_data_path(wl, wl->channel, 1); - if (ret < 0) - return ret; - - return 0; -} - -void wl1251_setup(struct wl12xx *wl) -{ - /* FIXME: Is it better to use strncpy here or is this ok? */ - wl->chip.fw_filename = WL1251_FW_NAME; - wl->chip.nvs_filename = WL1251_NVS_NAME; - - /* Now we know what chip we're using, so adjust the power on sleep - * time accordingly */ - wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP; - - wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE; - wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE; - - wl->chip.op_upload_nvs = wl1251_upload_nvs; - wl->chip.op_upload_fw = wl1251_upload_firmware; - wl->chip.op_boot = wl1251_boot; - wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl; - wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts; - wl->chip.op_hw_init = wl1251_hw_init; - wl->chip.op_plt_init = wl1251_plt_init; - - wl->chip.p_table = wl1251_part_table; - wl->chip.acx_reg_table = wl1251_acx_reg_table; - - INIT_WORK(&wl->irq_work, wl1251_irq_work); -} |
