diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211')
34 files changed, 2883 insertions, 2907 deletions
diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index 54e36fcb3954..fcfed6b99a62 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -4,13 +4,12 @@ config BRCMUTIL config BRCMSMAC tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver" depends on MAC80211 - depends on BCMA + depends on BCMA_POSSIBLE + select BCMA select NEW_LEDS if BCMA_DRIVER_GPIO select LEDS_CLASS if BCMA_DRIVER_GPIO select BRCMUTIL select FW_LOADER - select CRC_CCITT - select CRC8 select CORDIC ---help--- This module adds support for PCIe wireless adapters based on Broadcom diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile index 8e9b1221b32c..5681b9862023 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile @@ -28,14 +28,14 @@ brcmfmac-objs += \ fweh.o \ fwsignal.o \ p2p.o \ - dhd_cdc.o \ + proto.o \ + bcdc.o \ dhd_common.o \ dhd_linux.o \ btcoex.o brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \ dhd_sdio.o \ bcmsdh.o \ - bcmsdh_sdmmc.o \ sdio_chip.o brcmfmac-$(CONFIG_BRCMFMAC_USB) += \ usb.o diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c new file mode 100644 index 000000000000..c229210d50ba --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c @@ -0,0 +1,375 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/******************************************************************************* + * Communicates with the dongle by using dcmd codes. + * For certain dcmd codes, the dongle interprets string data from the host. + ******************************************************************************/ + +#include <linux/types.h> +#include <linux/netdevice.h> + +#include <brcmu_utils.h> +#include <brcmu_wifi.h> + +#include "dhd.h" +#include "dhd_bus.h" +#include "fwsignal.h" +#include "dhd_dbg.h" +#include "tracepoint.h" +#include "proto.h" +#include "bcdc.h" + +struct brcmf_proto_bcdc_dcmd { + __le32 cmd; /* dongle command value */ + __le32 len; /* lower 16: output buflen; + * upper 16: input buflen (excludes header) */ + __le32 flags; /* flag defns given below */ + __le32 status; /* status code returned from the device */ +}; + +/* BCDC flag definitions */ +#define BCDC_DCMD_ERROR 0x01 /* 1=cmd failed */ +#define BCDC_DCMD_SET 0x02 /* 0=get, 1=set cmd */ +#define BCDC_DCMD_IF_MASK 0xF000 /* I/F index */ +#define BCDC_DCMD_IF_SHIFT 12 +#define BCDC_DCMD_ID_MASK 0xFFFF0000 /* id an cmd pairing */ +#define BCDC_DCMD_ID_SHIFT 16 /* ID Mask shift bits */ +#define BCDC_DCMD_ID(flags) \ + (((flags) & BCDC_DCMD_ID_MASK) >> BCDC_DCMD_ID_SHIFT) + +/* + * BCDC header - Broadcom specific extension of CDC. + * Used on data packets to convey priority across USB. + */ +#define BCDC_HEADER_LEN 4 +#define BCDC_PROTO_VER 2 /* Protocol version */ +#define BCDC_FLAG_VER_MASK 0xf0 /* Protocol version mask */ +#define BCDC_FLAG_VER_SHIFT 4 /* Protocol version shift */ +#define BCDC_FLAG_SUM_GOOD 0x04 /* Good RX checksums */ +#define BCDC_FLAG_SUM_NEEDED 0x08 /* Dongle needs to do TX checksums */ +#define BCDC_PRIORITY_MASK 0x7 +#define BCDC_FLAG2_IF_MASK 0x0f /* packet rx interface in APSTA */ +#define BCDC_FLAG2_IF_SHIFT 0 + +#define BCDC_GET_IF_IDX(hdr) \ + ((int)((((hdr)->flags2) & BCDC_FLAG2_IF_MASK) >> BCDC_FLAG2_IF_SHIFT)) +#define BCDC_SET_IF_IDX(hdr, idx) \ + ((hdr)->flags2 = (((hdr)->flags2 & ~BCDC_FLAG2_IF_MASK) | \ + ((idx) << BCDC_FLAG2_IF_SHIFT))) + +/** + * struct brcmf_proto_bcdc_header - BCDC header format + * + * @flags: flags contain protocol and checksum info. + * @priority: 802.1d priority and USB flow control info (bit 4:7). + * @flags2: additional flags containing dongle interface index. + * @data_offset: start of packet data. header is following by firmware signals. + */ +struct brcmf_proto_bcdc_header { + u8 flags; + u8 priority; + u8 flags2; + u8 data_offset; +}; + +/* + * maximum length of firmware signal data between + * the BCDC header and packet data in the tx path. + */ +#define BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES 12 + +#define RETRIES 2 /* # of retries to retrieve matching dcmd response */ +#define BUS_HEADER_LEN (16+64) /* Must be atleast SDPCM_RESERVE + * (amount of header tha might be added) + * plus any space that might be needed + * for bus alignment padding. + */ +struct brcmf_bcdc { + u16 reqid; + u8 bus_header[BUS_HEADER_LEN]; + struct brcmf_proto_bcdc_dcmd msg; + unsigned char buf[BRCMF_DCMD_MAXLEN]; +}; + + +static int +brcmf_proto_bcdc_msg(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, + uint len, bool set) +{ + struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; + struct brcmf_proto_bcdc_dcmd *msg = &bcdc->msg; + u32 flags; + + brcmf_dbg(BCDC, "Enter\n"); + + memset(msg, 0, sizeof(struct brcmf_proto_bcdc_dcmd)); + + msg->cmd = cpu_to_le32(cmd); + msg->len = cpu_to_le32(len); + flags = (++bcdc->reqid << BCDC_DCMD_ID_SHIFT); + if (set) + flags |= BCDC_DCMD_SET; + flags = (flags & ~BCDC_DCMD_IF_MASK) | + (ifidx << BCDC_DCMD_IF_SHIFT); + msg->flags = cpu_to_le32(flags); + + if (buf) + memcpy(bcdc->buf, buf, len); + + len += sizeof(*msg); + if (len > BRCMF_TX_IOCTL_MAX_MSG_SIZE) + len = BRCMF_TX_IOCTL_MAX_MSG_SIZE; + + /* Send request */ + return brcmf_bus_txctl(drvr->bus_if, (unsigned char *)&bcdc->msg, len); +} + +static int brcmf_proto_bcdc_cmplt(struct brcmf_pub *drvr, u32 id, u32 len) +{ + int ret; + struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; + + brcmf_dbg(BCDC, "Enter\n"); + len += sizeof(struct brcmf_proto_bcdc_dcmd); + do { + ret = brcmf_bus_rxctl(drvr->bus_if, (unsigned char *)&bcdc->msg, + len); + if (ret < 0) + break; + } while (BCDC_DCMD_ID(le32_to_cpu(bcdc->msg.flags)) != id); + + return ret; +} + +static int +brcmf_proto_bcdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, + void *buf, uint len) +{ + struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; + struct brcmf_proto_bcdc_dcmd *msg = &bcdc->msg; + void *info; + int ret = 0, retries = 0; + u32 id, flags; + + brcmf_dbg(BCDC, "Enter, cmd %d len %d\n", cmd, len); + + ret = brcmf_proto_bcdc_msg(drvr, ifidx, cmd, buf, len, false); + if (ret < 0) { + brcmf_err("brcmf_proto_bcdc_msg failed w/status %d\n", + ret); + goto done; + } + +retry: + /* wait for interrupt and get first fragment */ + ret = brcmf_proto_bcdc_cmplt(drvr, bcdc->reqid, len); + if (ret < 0) + goto done; + + flags = le32_to_cpu(msg->flags); + id = (flags & BCDC_DCMD_ID_MASK) >> BCDC_DCMD_ID_SHIFT; + + if ((id < bcdc->reqid) && (++retries < RETRIES)) + goto retry; + if (id != bcdc->reqid) { + brcmf_err("%s: unexpected request id %d (expected %d)\n", + brcmf_ifname(drvr, ifidx), id, bcdc->reqid); + ret = -EINVAL; + goto done; + } + + /* Check info buffer */ + info = (void *)&msg[1]; + + /* Copy info buffer */ + if (buf) { + if (ret < (int)len) + len = ret; + memcpy(buf, info, len); + } + + /* Check the ERROR flag */ + if (flags & BCDC_DCMD_ERROR) + ret = le32_to_cpu(msg->status); + +done: + return ret; +} + +static int +brcmf_proto_bcdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, + void *buf, uint len) +{ + struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd; + struct brcmf_proto_bcdc_dcmd *msg = &bcdc->msg; + int ret = 0; + u32 flags, id; + + brcmf_dbg(BCDC, "Enter, cmd %d len %d\n", cmd, len); + + ret = brcmf_proto_bcdc_msg(drvr, ifidx, cmd, buf, len, true); + if (ret < 0) + goto done; + + ret = brcmf_proto_bcdc_cmplt(drvr, bcdc->reqid, len); + if (ret < 0) + goto done; + + flags = le32_to_cpu(msg->flags); + id = (flags & BCDC_DCMD_ID_MASK) >> BCDC_DCMD_ID_SHIFT; + + if (id != bcdc->reqid) { + brcmf_err("%s: unexpected request id %d (expected %d)\n", + brcmf_ifname(drvr, ifidx), id, bcdc->reqid); + ret = -EINVAL; + goto done; + } + + /* Check the ERROR flag */ + if (flags & BCDC_DCMD_ERROR) + ret = le32_to_cpu(msg->status); + +done: + return ret; +} + +static void +brcmf_proto_bcdc_hdrpush(struct brcmf_pub *drvr, int ifidx, u8 offset, + struct sk_buff *pktbuf) +{ + struct brcmf_proto_bcdc_header *h; + + brcmf_dbg(BCDC, "Enter\n"); + + /* Push BDC header used to convey priority for buses that don't */ + skb_push(pktbuf, BCDC_HEADER_LEN); + + h = (struct brcmf_proto_bcdc_header *)(pktbuf->data); + + h->flags = (BCDC_PROTO_VER << BCDC_FLAG_VER_SHIFT); + if (pktbuf->ip_summed == CHECKSUM_PARTIAL) + h->flags |= BCDC_FLAG_SUM_NEEDED; + + h->priority = (pktbuf->priority & BCDC_PRIORITY_MASK); + h->flags2 = 0; + h->data_offset = offset; + BCDC_SET_IF_IDX(h, ifidx); + trace_brcmf_bcdchdr(pktbuf->data); +} + +static int +brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, + struct sk_buff *pktbuf) +{ + struct brcmf_proto_bcdc_header *h; + + brcmf_dbg(BCDC, "Enter\n"); + + /* Pop BCDC header used to convey priority for buses that don't */ + if (pktbuf->len <= BCDC_HEADER_LEN) { + brcmf_dbg(INFO, "rx data too short (%d <= %d)\n", + pktbuf->len, BCDC_HEADER_LEN); + return -EBADE; + } + + trace_brcmf_bcdchdr(pktbuf->data); + h = (struct brcmf_proto_bcdc_header *)(pktbuf->data); + + *ifidx = BCDC_GET_IF_IDX(h); + if (*ifidx >= BRCMF_MAX_IFS) { + brcmf_err("rx data ifnum out of range (%d)\n", *ifidx); + return -EBADE; + } + /* The ifidx is the idx to map to matching netdev/ifp. When receiving + * events this is easy because it contains the bssidx which maps + * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. + * bssidx 1 is used for p2p0 and no data can be received or + * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 + */ + if (*ifidx) + (*ifidx)++; + + if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) != + BCDC_PROTO_VER) { + brcmf_err("%s: non-BCDC packet received, flags 0x%x\n", + brcmf_ifname(drvr, *ifidx), h->flags); + return -EBADE; + } + + if (h->flags & BCDC_FLAG_SUM_GOOD) { + brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n", + brcmf_ifname(drvr, *ifidx), h->flags); + pktbuf->ip_summed = CHECKSUM_UNNECESSARY; + } + + pktbuf->priority = h->priority & BCDC_PRIORITY_MASK; + + skb_pull(pktbuf, BCDC_HEADER_LEN); + if (do_fws) + brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf); + else + skb_pull(pktbuf, h->data_offset << 2); + + if (pktbuf->len == 0) + return -ENODATA; + return 0; +} + +static int +brcmf_proto_bcdc_txdata(struct brcmf_pub *drvr, int ifidx, u8 offset, + struct sk_buff *pktbuf) +{ + brcmf_proto_bcdc_hdrpush(drvr, ifidx, offset, pktbuf); + return brcmf_bus_txdata(drvr->bus_if, pktbuf); +} + + +int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) +{ + struct brcmf_bcdc *bcdc; + + bcdc = kzalloc(sizeof(*bcdc), GFP_ATOMIC); + if (!bcdc) + goto fail; + + /* ensure that the msg buf directly follows the cdc msg struct */ + if ((unsigned long)(&bcdc->msg + 1) != (unsigned long)bcdc->buf) { + brcmf_err("struct brcmf_proto_bcdc is not correctly defined\n"); + goto fail; + } + + drvr->proto->hdrpull = brcmf_proto_bcdc_hdrpull; + drvr->proto->query_dcmd = brcmf_proto_bcdc_query_dcmd; + drvr->proto->set_dcmd = brcmf_proto_bcdc_set_dcmd; + drvr->proto->txdata = brcmf_proto_bcdc_txdata; + drvr->proto->pd = bcdc; + + drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; + drvr->bus_if->maxctl = BRCMF_DCMD_MAXLEN + + sizeof(struct brcmf_proto_bcdc_dcmd); + return 0; + +fail: + kfree(bcdc); + return -ENOMEM; +} + +void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) +{ + kfree(drvr->proto->pd); + drvr->proto->pd = NULL; +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h new file mode 100644 index 000000000000..17e8c039ff32 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef BRCMFMAC_BCDC_H +#define BRCMFMAC_BCDC_H + + +int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr); +void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr); + + +#endif /* BRCMFMAC_BCDC_H */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 3e10b801eee8..34c993dd0602 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -17,16 +17,23 @@ #include <linux/types.h> #include <linux/netdevice.h> -#include <linux/export.h> #include <linux/pci.h> #include <linux/pci_ids.h> #include <linux/sched.h> #include <linux/completion.h> #include <linux/scatterlist.h> #include <linux/mmc/sdio.h> +#include <linux/mmc/core.h> #include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> #include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> #include <linux/platform_data/brcmfmac-sdio.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <net/cfg80211.h> #include <defs.h> #include <brcm_hw_ids.h> @@ -36,11 +43,19 @@ #include "dhd_bus.h" #include "dhd_dbg.h" #include "sdio_host.h" +#include "sdio_chip.h" #define SDIOH_API_ACCESS_RETRY_LIMIT 2 +#define DMA_ALIGN_MASK 0x03 -static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id) +#define SDIO_FUNC1_BLOCKSIZE 64 +#define SDIO_FUNC2_BLOCKSIZE 512 +/* Maximum milliseconds to wait for F2 to come up */ +#define SDIO_WAIT_F2RDY 3000 + + +static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id) { struct brcmf_bus *bus_if = dev_get_drvdata(dev_id); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; @@ -55,27 +70,46 @@ static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id) sdiodev->irq_en = false; } - brcmf_sdbrcm_isr(sdiodev->bus); + brcmf_sdio_isr(sdiodev->bus); return IRQ_HANDLED; } -static void brcmf_sdio_ib_irqhandler(struct sdio_func *func) +static void brcmf_sdiod_ib_irqhandler(struct sdio_func *func) { struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; brcmf_dbg(INTR, "IB intr triggered\n"); - brcmf_sdbrcm_isr(sdiodev->bus); + brcmf_sdio_isr(sdiodev->bus); } /* dummy handler for SDIO function 2 interrupt */ -static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func) +static void brcmf_sdiod_dummy_irqhandler(struct sdio_func *func) +{ +} + +static bool brcmf_sdiod_pm_resume_error(struct brcmf_sdio_dev *sdiodev) +{ + bool is_err = false; +#ifdef CONFIG_PM_SLEEP + is_err = atomic_read(&sdiodev->suspend); +#endif + return is_err; +} + +static void brcmf_sdiod_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, + wait_queue_head_t *wq) { +#ifdef CONFIG_PM_SLEEP + int retry = 0; + while (atomic_read(&sdiodev->suspend) && retry++ != 30) + wait_event_timeout(*wq, false, HZ/100); +#endif } -int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) +int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) { int ret = 0; u8 data; @@ -85,7 +119,7 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n", sdiodev->pdata->oob_irq_nr); ret = request_irq(sdiodev->pdata->oob_irq_nr, - brcmf_sdio_oob_irqhandler, + brcmf_sdiod_oob_irqhandler, sdiodev->pdata->oob_irq_flags, "brcmf_oob_intr", &sdiodev->func[1]->dev); @@ -109,36 +143,36 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) sdio_claim_host(sdiodev->func[1]); /* must configure SDIO_CCCR_IENx to enable irq */ - data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); + data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret); data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); + brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); /* redirect, configure and enable io for interrupt signal */ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH) data |= SDIO_SEPINT_ACT_HI; - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); + brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); sdio_release_host(sdiodev->func[1]); } else { brcmf_dbg(SDIO, "Entering\n"); sdio_claim_host(sdiodev->func[1]); - sdio_claim_irq(sdiodev->func[1], brcmf_sdio_ib_irqhandler); - sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler); + sdio_claim_irq(sdiodev->func[1], brcmf_sdiod_ib_irqhandler); + sdio_claim_irq(sdiodev->func[2], brcmf_sdiod_dummy_irqhandler); sdio_release_host(sdiodev->func[1]); } return 0; } -int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) +int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev) { brcmf_dbg(SDIO, "Entering\n"); if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { sdio_claim_host(sdiodev->func[1]); - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); - brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); + brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); + brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); sdio_release_host(sdiodev->func[1]); if (sdiodev->oob_irq_requested) { @@ -161,29 +195,141 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) return 0; } +static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, + uint regaddr, u8 byte) +{ + int err_ret; + + /* + * Can only directly write to some F0 registers. + * Handle CCCR_IENx and CCCR_ABORT command + * as a special case. + */ + if ((regaddr == SDIO_CCCR_ABORT) || + (regaddr == SDIO_CCCR_IENx)) + sdio_writeb(func, byte, regaddr, &err_ret); + else + sdio_f0_writeb(func, byte, regaddr, &err_ret); + + return err_ret; +} + +static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn, + u32 addr, u8 regsz, void *data, bool write) +{ + struct sdio_func *func; + int ret; + + brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", + write, fn, addr, regsz); + + brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_word_wait); + if (brcmf_sdiod_pm_resume_error(sdiodev)) + return -EIO; + + /* only allow byte access on F0 */ + if (WARN_ON(regsz > 1 && !fn)) + return -EINVAL; + func = sdiodev->func[fn]; + + switch (regsz) { + case sizeof(u8): + if (write) { + if (fn) + sdio_writeb(func, *(u8 *)data, addr, &ret); + else + ret = brcmf_sdiod_f0_writeb(func, addr, + *(u8 *)data); + } else { + if (fn) + *(u8 *)data = sdio_readb(func, addr, &ret); + else + *(u8 *)data = sdio_f0_readb(func, addr, &ret); + } + break; + case sizeof(u16): + if (write) + sdio_writew(func, *(u16 *)data, addr, &ret); + else + *(u16 *)data = sdio_readw(func, addr, &ret); + break; + case sizeof(u32): + if (write) + sdio_writel(func, *(u32 *)data, addr, &ret); + else + *(u32 *)data = sdio_readl(func, addr, &ret); + break; + default: + brcmf_err("invalid size: %d\n", regsz); + break; + } + + if (ret) { + /* + * SleepCSR register access can fail when + * waking up the device so reduce this noise + * in the logs. + */ + if (addr != SBSDIO_FUNC1_SLEEPCSR) + brcmf_err("failed to %s data F%d@0x%05x, err: %d\n", + write ? "write" : "read", fn, addr, ret); + else + brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n", + write ? "write" : "read", fn, addr, ret); + } + return ret; +} + +static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, + u8 regsz, void *data, bool write) +{ + u8 func_num; + s32 retry = 0; + int ret; + + /* + * figure out how to read the register based on address range + * 0x00 ~ 0x7FF: function 0 CCCR and FBR + * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers + * The rest: function 1 silicon backplane core registers + */ + if ((addr & ~REG_F0_REG_MASK) == 0) + func_num = SDIO_FUNC_0; + else + func_num = SDIO_FUNC_1; + + do { + if (!write) + memset(data, 0, regsz); + /* for retry wait for 1 ms till bus get settled down */ + if (retry) + usleep_range(1000, 2000); + ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz, + data, write); + } while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); + + if (ret != 0) + brcmf_err("failed with %d\n", ret); + + return ret; +} + static int -brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) +brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) { int err = 0, i; u8 addr[3]; - s32 retry; addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK; addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK; addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK; for (i = 0; i < 3; i++) { - retry = 0; - do { - if (retry) - usleep_range(1000, 2000); - err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, - SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i, - &addr[i]); - } while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); - + err = brcmf_sdiod_regrw_helper(sdiodev, + SBSDIO_FUNC1_SBADDRLOW + i, + sizeof(u8), &addr[i], true); if (err) { - brcmf_err("failed at addr:0x%0x\n", + brcmf_err("failed at addr: 0x%0x\n", SBSDIO_FUNC1_SBADDRLOW + i); break; } @@ -193,13 +339,13 @@ brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) } static int -brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr) +brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr) { uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK; int err = 0; if (bar0 != sdiodev->sbwad) { - err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0); + err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0); if (err) return err; @@ -214,62 +360,14 @@ brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr) return 0; } -int -brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, - void *data, bool write) -{ - u8 func_num, reg_size; - s32 retry = 0; - int ret; - - /* - * figure out how to read the register based on address range - * 0x00 ~ 0x7FF: function 0 CCCR and FBR - * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers - * The rest: function 1 silicon backplane core registers - */ - if ((addr & ~REG_F0_REG_MASK) == 0) { - func_num = SDIO_FUNC_0; - reg_size = 1; - } else if ((addr & ~REG_F1_MISC_MASK) == 0) { - func_num = SDIO_FUNC_1; - reg_size = 1; - } else { - func_num = SDIO_FUNC_1; - reg_size = 4; - - ret = brcmf_sdio_addrprep(sdiodev, reg_size, &addr); - if (ret) - goto done; - } - - do { - if (!write) - memset(data, 0, reg_size); - if (retry) /* wait for 1 ms till bus get settled down */ - usleep_range(1000, 2000); - if (reg_size == 1) - ret = brcmf_sdioh_request_byte(sdiodev, write, - func_num, addr, data); - else - ret = brcmf_sdioh_request_word(sdiodev, write, - func_num, addr, data, 4); - } while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); - -done: - if (ret != 0) - brcmf_err("failed with %d\n", ret); - - return ret; -} - -u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) +u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) { u8 data; int retval; brcmf_dbg(SDIO, "addr:0x%08x\n", addr); - retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); + retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data, + false); brcmf_dbg(SDIO, "data:0x%02x\n", data); if (ret) @@ -278,52 +376,62 @@ u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) return data; } -u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) +u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) { u32 data; int retval; brcmf_dbg(SDIO, "addr:0x%08x\n", addr); - retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); + retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr); + if (retval) + goto done; + retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data, + false); brcmf_dbg(SDIO, "data:0x%08x\n", data); +done: if (ret) *ret = retval; return data; } -void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, +void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data, int *ret) { int retval; brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data); - retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); - + retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data, + true); if (ret) *ret = retval; } -void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, +void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, int *ret) { int retval; brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data); - retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); + retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr); + if (retval) + goto done; + retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data, + true); +done: if (ret) *ret = retval; } -static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, +static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, bool write, u32 addr, struct sk_buff *pkt) { unsigned int req_sz; - brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait); - if (brcmf_pm_resume_error(sdiodev)) + brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait); + if (brcmf_sdiod_pm_resume_error(sdiodev)) return -EIO; /* Single skb use the standard mmc interface */ @@ -346,7 +454,7 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, } /** - * brcmf_sdio_sglist_rw - SDIO interface function for block data access + * brcmf_sdiod_sglist_rw - SDIO interface function for block data access * @sdiodev: brcmfmac sdio device * @fn: SDIO function number * @write: direction flag @@ -357,9 +465,9 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn, * stack for block data access. It assumes that the skb passed down by the * caller has already been padded and aligned. */ -static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, - bool write, u32 addr, - struct sk_buff_head *pktlist) +static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, + bool write, u32 addr, + struct sk_buff_head *pktlist) { unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset; unsigned int max_req_sz, orig_offset, dst_offset; @@ -377,8 +485,8 @@ static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, if (!pktlist->qlen) return -EINVAL; - brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait); - if (brcmf_pm_resume_error(sdiodev)) + brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait); + if (brcmf_sdiod_pm_resume_error(sdiodev)) return -EIO; target_list = pktlist; @@ -525,9 +633,7 @@ exit: return ret; } -int -brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, u8 *buf, uint nbytes) +int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes) { struct sk_buff *mypkt; int err; @@ -539,7 +645,7 @@ brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, return -EIO; } - err = brcmf_sdcard_recv_pkt(sdiodev, addr, fn, flags, mypkt); + err = brcmf_sdiod_recv_pkt(sdiodev, mypkt); if (!err) memcpy(buf, mypkt->data, nbytes); @@ -547,50 +653,47 @@ brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, return err; } -int -brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff *pkt) +int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt) { - uint width; + u32 addr = sdiodev->sbwad; int err = 0; - brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n", - fn, addr, pkt->len); + brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len); - width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; - err = brcmf_sdio_addrprep(sdiodev, width, &addr); + err = brcmf_sdiod_addrprep(sdiodev, 4, &addr); if (err) goto done; - err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt); + err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt); done: return err; } -int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff_head *pktq, uint totlen) +int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq, uint totlen) { struct sk_buff *glom_skb; struct sk_buff *skb; - uint width; + u32 addr = sdiodev->sbwad; int err = 0; - brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n", - fn, addr, pktq->qlen); + brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", + addr, pktq->qlen); - width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; - err = brcmf_sdio_addrprep(sdiodev, width, &addr); + err = brcmf_sdiod_addrprep(sdiodev, 4, &addr); if (err) goto done; if (pktq->qlen == 1) - err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pktq->next); + err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, + pktq->next); else if (!sdiodev->sg_support) { glom_skb = brcmu_pkt_buf_get_skb(totlen); if (!glom_skb) return -ENOMEM; - err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, glom_skb); + err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, + glom_skb); if (err) goto done; @@ -599,18 +702,17 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, skb_pull(glom_skb, skb->len); } } else - err = brcmf_sdio_sglist_rw(sdiodev, fn, false, addr, pktq); + err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr, + pktq); done: return err; } -int -brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, u8 *buf, uint nbytes) +int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes) { struct sk_buff *mypkt; - uint width; + u32 addr = sdiodev->sbwad; int err; mypkt = brcmu_pkt_buf_get_skb(nbytes); @@ -622,48 +724,47 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, memcpy(mypkt->data, buf, nbytes); - width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; - err = brcmf_sdio_addrprep(sdiodev, width, &addr); + err = brcmf_sdiod_addrprep(sdiodev, 4, &addr); if (!err) - err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, mypkt); + err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr, + mypkt); brcmu_pkt_buf_free_skb(mypkt); return err; } -int -brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff_head *pktq) +int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq) { struct sk_buff *skb; - uint width; + u32 addr = sdiodev->sbwad; int err; - brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n", - fn, addr, pktq->qlen); + brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen); - width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; - err = brcmf_sdio_addrprep(sdiodev, width, &addr); + err = brcmf_sdiod_addrprep(sdiodev, 4, &addr); if (err) return err; if (pktq->qlen == 1 || !sdiodev->sg_support) skb_queue_walk(pktq, skb) { - err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, skb); + err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, + addr, skb); if (err) break; } else - err = brcmf_sdio_sglist_rw(sdiodev, fn, true, addr, pktq); + err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr, + pktq); return err; } int -brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, - u8 *data, uint size) +brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, + u8 *data, uint size) { int bcmerror = 0; struct sk_buff *pkt; @@ -690,7 +791,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, /* Do the transfer(s) */ while (size) { /* Set the backplane window to include the start address */ - bcmerror = brcmf_sdcard_set_sbaddr_window(sdiodev, address); + bcmerror = brcmf_sdiod_set_sbaddr_window(sdiodev, address); if (bcmerror) break; @@ -704,8 +805,8 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, skb_put(pkt, dsize); if (write) memcpy(pkt->data, data, dsize); - bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write, - sdaddr, pkt); + bcmerror = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write, + sdaddr, pkt); if (bcmerror) { brcmf_err("membytes transfer failed\n"); break; @@ -727,7 +828,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, dev_kfree_skb(pkt); /* Return the window to backplane enumeration space for core access */ - if (brcmf_sdcard_set_sbaddr_window(sdiodev, sdiodev->sbwad)) + if (brcmf_sdiod_set_sbaddr_window(sdiodev, sdiodev->sbwad)) brcmf_err("FAILED to set window back to 0x%x\n", sdiodev->sbwad); @@ -736,67 +837,337 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, return bcmerror; } -int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn) +int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn) { char t_func = (char)fn; brcmf_dbg(SDIO, "Enter\n"); /* issue abort cmd52 command through F0 */ - brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0, - SDIO_CCCR_ABORT, &t_func); + brcmf_sdiod_request_data(sdiodev, SDIO_FUNC_0, SDIO_CCCR_ABORT, + sizeof(t_func), &t_func, true); brcmf_dbg(SDIO, "Exit\n"); return 0; } -int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) +static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev) { - u32 regs = 0; + sdiodev->bus_if->state = BRCMF_BUS_DOWN; + + if (sdiodev->bus) { + brcmf_sdio_remove(sdiodev->bus); + sdiodev->bus = NULL; + } + + /* Disable Function 2 */ + sdio_claim_host(sdiodev->func[2]); + sdio_disable_func(sdiodev->func[2]); + sdio_release_host(sdiodev->func[2]); + + /* Disable Function 1 */ + sdio_claim_host(sdiodev->func[1]); + sdio_disable_func(sdiodev->func[1]); + sdio_release_host(sdiodev->func[1]); + + sdiodev->sbwad = 0; + + return 0; +} + +static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) +{ + struct sdio_func *func; + struct mmc_host *host; + uint max_blocks; int ret = 0; - ret = brcmf_sdioh_attach(sdiodev); - if (ret) + sdiodev->num_funcs = 2; + + sdio_claim_host(sdiodev->func[1]); + + ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE); + if (ret) { + brcmf_err("Failed to set F1 blocksize\n"); + sdio_release_host(sdiodev->func[1]); + goto out; + } + ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE); + if (ret) { + brcmf_err("Failed to set F2 blocksize\n"); + sdio_release_host(sdiodev->func[1]); + goto out; + } + + /* increase F2 timeout */ + sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY; + + /* Enable Function 1 */ + ret = sdio_enable_func(sdiodev->func[1]); + sdio_release_host(sdiodev->func[1]); + if (ret) { + brcmf_err("Failed to enable F1: err=%d\n", ret); goto out; + } - regs = SI_ENUM_BASE; + /* + * determine host related variables after brcmf_sdiod_probe() + * as func->cur_blksize is properly set and F2 init has been + * completed successfully. + */ + func = sdiodev->func[2]; + host = func->card->host; + sdiodev->sg_support = host->max_segs > 1; + max_blocks = min_t(uint, host->max_blk_count, 511u); + sdiodev->max_request_size = min_t(uint, host->max_req_size, + max_blocks * func->cur_blksize); + sdiodev->max_segment_count = min_t(uint, host->max_segs, + SG_MAX_SINGLE_ALLOC); + sdiodev->max_segment_size = host->max_seg_size; /* try to attach to the target device */ - sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev); + sdiodev->bus = brcmf_sdio_probe(sdiodev); if (!sdiodev->bus) { - brcmf_err("device attach failed\n"); ret = -ENODEV; goto out; } out: if (ret) - brcmf_sdio_remove(sdiodev); + brcmf_sdiod_remove(sdiodev); return ret; } -EXPORT_SYMBOL(brcmf_sdio_probe); -int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev) +/* devices we support, null terminated */ +static const struct sdio_device_id brcmf_sdmmc_ids[] = { + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, + SDIO_DEVICE_ID_BROADCOM_4335_4339)}, + { /* end: all zeroes */ }, +}; +MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); + +static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; + + +static int brcmf_ops_sdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) { - sdiodev->bus_if->state = BRCMF_BUS_DOWN; + int err; + struct brcmf_sdio_dev *sdiodev; + struct brcmf_bus *bus_if; - if (sdiodev->bus) { - brcmf_sdbrcm_disconnect(sdiodev->bus); - sdiodev->bus = NULL; + brcmf_dbg(SDIO, "Enter\n"); + brcmf_dbg(SDIO, "Class=%x\n", func->class); + brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor); + brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); + brcmf_dbg(SDIO, "Function#: %d\n", func->num); + + /* Consume func num 1 but dont do anything with it. */ + if (func->num == 1) + return 0; + + /* Ignore anything but func 2 */ + if (func->num != 2) + return -ENODEV; + + bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL); + if (!bus_if) + return -ENOMEM; + sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL); + if (!sdiodev) { + kfree(bus_if); + return -ENOMEM; + } + + /* store refs to functions used. mmc_card does + * not hold the F0 function pointer. + */ + sdiodev->func[0] = kmemdup(func, sizeof(*func), GFP_KERNEL); + sdiodev->func[0]->num = 0; + sdiodev->func[1] = func->card->sdio_func[0]; + sdiodev->func[2] = func; + + sdiodev->bus_if = bus_if; + bus_if->bus_priv.sdio = sdiodev; + bus_if->proto_type = BRCMF_PROTO_BCDC; + dev_set_drvdata(&func->dev, bus_if); + dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); + sdiodev->dev = &sdiodev->func[1]->dev; + sdiodev->pdata = brcmfmac_sdio_pdata; + + atomic_set(&sdiodev->suspend, false); + init_waitqueue_head(&sdiodev->request_word_wait); + init_waitqueue_head(&sdiodev->request_buffer_wait); + + brcmf_dbg(SDIO, "F2 found, calling brcmf_sdiod_probe...\n"); + err = brcmf_sdiod_probe(sdiodev); + if (err) { + brcmf_err("F2 error, probe failed %d...\n", err); + goto fail; } - brcmf_sdioh_detach(sdiodev); + brcmf_dbg(SDIO, "F2 init completed...\n"); + return 0; - sdiodev->sbwad = 0; +fail: + dev_set_drvdata(&func->dev, NULL); + dev_set_drvdata(&sdiodev->func[1]->dev, NULL); + kfree(sdiodev->func[0]); + kfree(sdiodev); + kfree(bus_if); + return err; +} + +static void brcmf_ops_sdio_remove(struct sdio_func *func) +{ + struct brcmf_bus *bus_if; + struct brcmf_sdio_dev *sdiodev; + + brcmf_dbg(SDIO, "Enter\n"); + brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor); + brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); + brcmf_dbg(SDIO, "Function: %d\n", func->num); + + if (func->num != 1 && func->num != 2) + return; + + bus_if = dev_get_drvdata(&func->dev); + if (bus_if) { + sdiodev = bus_if->bus_priv.sdio; + brcmf_sdiod_remove(sdiodev); + + dev_set_drvdata(&sdiodev->func[1]->dev, NULL); + dev_set_drvdata(&sdiodev->func[2]->dev, NULL); + + kfree(bus_if); + kfree(sdiodev->func[0]); + kfree(sdiodev); + } + + brcmf_dbg(SDIO, "Exit\n"); +} + +#ifdef CONFIG_PM_SLEEP +static int brcmf_ops_sdio_suspend(struct device *dev) +{ + mmc_pm_flag_t sdio_flags; + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + int ret = 0; + + brcmf_dbg(SDIO, "\n"); + + atomic_set(&sdiodev->suspend, true); + + sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]); + if (!(sdio_flags & MMC_PM_KEEP_POWER)) { + brcmf_err("Host can't keep power while suspended\n"); + return -EINVAL; + } + + ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER); + if (ret) { + brcmf_err("Failed to set pm_flags\n"); + return ret; + } + + brcmf_sdio_wd_timer(sdiodev->bus, 0); + + return ret; +} + +static int brcmf_ops_sdio_resume(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + + brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); + atomic_set(&sdiodev->suspend, false); + return 0; +} + +static const struct dev_pm_ops brcmf_sdio_pm_ops = { + .suspend = brcmf_ops_sdio_suspend, + .resume = brcmf_ops_sdio_resume, +}; +#endif /* CONFIG_PM_SLEEP */ + +static struct sdio_driver brcmf_sdmmc_driver = { + .probe = brcmf_ops_sdio_probe, + .remove = brcmf_ops_sdio_remove, + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id_table = brcmf_sdmmc_ids, +#ifdef CONFIG_PM_SLEEP + .drv = { + .pm = &brcmf_sdio_pm_ops, + }, +#endif /* CONFIG_PM_SLEEP */ +}; + +static int brcmf_sdio_pd_probe(struct platform_device *pdev) +{ + brcmf_dbg(SDIO, "Enter\n"); + + brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev); + + if (brcmfmac_sdio_pdata->power_on) + brcmfmac_sdio_pdata->power_on(); return 0; } -EXPORT_SYMBOL(brcmf_sdio_remove); -void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable) +static int brcmf_sdio_pd_remove(struct platform_device *pdev) +{ + brcmf_dbg(SDIO, "Enter\n"); + + if (brcmfmac_sdio_pdata->power_off) + brcmfmac_sdio_pdata->power_off(); + + sdio_unregister_driver(&brcmf_sdmmc_driver); + + return 0; +} + +static struct platform_driver brcmf_sdio_pd = { + .remove = brcmf_sdio_pd_remove, + .driver = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .owner = THIS_MODULE, + } +}; + +void brcmf_sdio_register(void) +{ + int ret; + + ret = sdio_register_driver(&brcmf_sdmmc_driver); + if (ret) + brcmf_err("sdio_register_driver failed: %d\n", ret); +} + +void brcmf_sdio_exit(void) { - if (enable) - brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); + brcmf_dbg(SDIO, "Enter\n"); + + if (brcmfmac_sdio_pdata) + platform_driver_unregister(&brcmf_sdio_pd); else - brcmf_sdbrcm_wd_timer(sdiodev->bus, 0); + sdio_unregister_driver(&brcmf_sdmmc_driver); +} + +void __init brcmf_sdio_init(void) +{ + int ret; + + brcmf_dbg(SDIO, "Enter\n"); + + ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); + if (ret == -ENODEV) + brcmf_dbg(SDIO, "No platform data available.\n"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c deleted file mode 100644 index abc9ceca70f3..000000000000 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ /dev/null @@ -1,539 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/types.h> -#include <linux/netdevice.h> -#include <linux/mmc/sdio.h> -#include <linux/mmc/core.h> -#include <linux/mmc/sdio_func.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> -#include <linux/suspend.h> -#include <linux/errno.h> -#include <linux/sched.h> /* request_irq() */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/platform_data/brcmfmac-sdio.h> -#include <net/cfg80211.h> - -#include <defs.h> -#include <brcm_hw_ids.h> -#include <brcmu_utils.h> -#include <brcmu_wifi.h> -#include "sdio_host.h" -#include "sdio_chip.h" -#include "dhd_dbg.h" -#include "dhd_bus.h" - -#define SDIO_VENDOR_ID_BROADCOM 0x02d0 - -#define DMA_ALIGN_MASK 0x03 - -#define SDIO_FUNC1_BLOCKSIZE 64 -#define SDIO_FUNC2_BLOCKSIZE 512 - -/* devices we support, null terminated */ -static const struct sdio_device_id brcmf_sdmmc_ids[] = { - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, - SDIO_DEVICE_ID_BROADCOM_4335_4339)}, - { /* end: all zeroes */ }, -}; -MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); - -static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; - - -bool -brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev) -{ - bool is_err = false; -#ifdef CONFIG_PM_SLEEP - is_err = atomic_read(&sdiodev->suspend); -#endif - return is_err; -} - -void -brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq) -{ -#ifdef CONFIG_PM_SLEEP - int retry = 0; - while (atomic_read(&sdiodev->suspend) && retry++ != 30) - wait_event_timeout(*wq, false, HZ/100); -#endif -} - -static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, - uint regaddr, u8 *byte) -{ - struct sdio_func *sdfunc = sdiodev->func[0]; - int err_ret; - - /* - * Can only directly write to some F0 registers. - * Handle F2 enable/disable and Abort command - * as a special case. - */ - if (regaddr == SDIO_CCCR_IOEx) { - sdfunc = sdiodev->func[2]; - if (sdfunc) { - if (*byte & SDIO_FUNC_ENABLE_2) { - /* Enable Function 2 */ - err_ret = sdio_enable_func(sdfunc); - if (err_ret) - brcmf_err("enable F2 failed:%d\n", - err_ret); - } else { - /* Disable Function 2 */ - err_ret = sdio_disable_func(sdfunc); - if (err_ret) - brcmf_err("Disable F2 failed:%d\n", - err_ret); - } - } else { - err_ret = -ENOENT; - } - } else if ((regaddr == SDIO_CCCR_ABORT) || - (regaddr == SDIO_CCCR_IENx)) { - sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), - GFP_KERNEL); - if (!sdfunc) - return -ENOMEM; - sdfunc->num = 0; - sdio_writeb(sdfunc, *byte, regaddr, &err_ret); - kfree(sdfunc); - } else if (regaddr < 0xF0) { - brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr); - err_ret = -EPERM; - } else { - sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret); - } - - return err_ret; -} - -int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint func, - uint regaddr, u8 *byte) -{ - int err_ret; - - brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr); - - brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait); - if (brcmf_pm_resume_error(sdiodev)) - return -EIO; - - if (rw && func == 0) { - /* handle F0 separately */ - err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte); - } else { - if (rw) /* CMD52 Write */ - sdio_writeb(sdiodev->func[func], *byte, regaddr, - &err_ret); - else if (func == 0) { - *byte = sdio_f0_readb(sdiodev->func[func], regaddr, - &err_ret); - } else { - *byte = sdio_readb(sdiodev->func[func], regaddr, - &err_ret); - } - } - - if (err_ret) - brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", - rw ? "write" : "read", func, regaddr, *byte, err_ret); - - return err_ret; -} - -int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, - uint rw, uint func, uint addr, u32 *word, - uint nbytes) -{ - int err_ret = -EIO; - - if (func == 0) { - brcmf_err("Only CMD52 allowed to F0\n"); - return -EINVAL; - } - - brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", - rw, func, addr, nbytes); - - brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait); - if (brcmf_pm_resume_error(sdiodev)) - return -EIO; - - if (rw) { /* CMD52 Write */ - if (nbytes == 4) - sdio_writel(sdiodev->func[func], *word, addr, - &err_ret); - else if (nbytes == 2) - sdio_writew(sdiodev->func[func], (*word & 0xFFFF), - addr, &err_ret); - else - brcmf_err("Invalid nbytes: %d\n", nbytes); - } else { /* CMD52 Read */ - if (nbytes == 4) - *word = sdio_readl(sdiodev->func[func], addr, &err_ret); - else if (nbytes == 2) - *word = sdio_readw(sdiodev->func[func], addr, - &err_ret) & 0xFFFF; - else - brcmf_err("Invalid nbytes: %d\n", nbytes); - } - - if (err_ret) - brcmf_err("Failed to %s word, Err: 0x%08x\n", - rw ? "write" : "read", err_ret); - - return err_ret; -} - -static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr) -{ - /* read 24 bits and return valid 17 bit addr */ - int i, ret; - u32 scratch, regdata; - __le32 scratch_le; - u8 *ptr = (u8 *)&scratch_le; - - for (i = 0; i < 3; i++) { - regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret); - if (ret != 0) - brcmf_err("Can't read!\n"); - - *ptr++ = (u8) regdata; - regaddr++; - } - - /* Only the lower 17-bits are valid */ - scratch = le32_to_cpu(scratch_le); - scratch &= 0x0001FFFF; - return scratch; -} - -static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev) -{ - int err_ret; - u32 fbraddr; - u8 func; - - brcmf_dbg(SDIO, "\n"); - - /* Get the Card's common CIS address */ - sdiodev->func_cis_ptr[0] = brcmf_sdioh_get_cisaddr(sdiodev, - SDIO_CCCR_CIS); - brcmf_dbg(SDIO, "Card's Common CIS Ptr = 0x%x\n", - sdiodev->func_cis_ptr[0]); - - /* Get the Card's function CIS (for each function) */ - for (fbraddr = SDIO_FBR_BASE(1), func = 1; - func <= sdiodev->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) { - sdiodev->func_cis_ptr[func] = - brcmf_sdioh_get_cisaddr(sdiodev, SDIO_FBR_CIS + fbraddr); - brcmf_dbg(SDIO, "Function %d CIS Ptr = 0x%x\n", - func, sdiodev->func_cis_ptr[func]); - } - - /* Enable Function 1 */ - err_ret = sdio_enable_func(sdiodev->func[1]); - if (err_ret) - brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret); - - return false; -} - -/* - * Public entry points & extern's - */ -int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev) -{ - int err_ret = 0; - - brcmf_dbg(SDIO, "\n"); - - sdiodev->num_funcs = 2; - - sdio_claim_host(sdiodev->func[1]); - - err_ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE); - if (err_ret) { - brcmf_err("Failed to set F1 blocksize\n"); - goto out; - } - - err_ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE); - if (err_ret) { - brcmf_err("Failed to set F2 blocksize\n"); - goto out; - } - - brcmf_sdioh_enablefuncs(sdiodev); - -out: - sdio_release_host(sdiodev->func[1]); - brcmf_dbg(SDIO, "Done\n"); - return err_ret; -} - -void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev) -{ - brcmf_dbg(SDIO, "\n"); - - /* Disable Function 2 */ - sdio_claim_host(sdiodev->func[2]); - sdio_disable_func(sdiodev->func[2]); - sdio_release_host(sdiodev->func[2]); - - /* Disable Function 1 */ - sdio_claim_host(sdiodev->func[1]); - sdio_disable_func(sdiodev->func[1]); - sdio_release_host(sdiodev->func[1]); - -} - -static int brcmf_ops_sdio_probe(struct sdio_func *func, - const struct sdio_device_id *id) -{ - int err; - struct brcmf_sdio_dev *sdiodev; - struct brcmf_bus *bus_if; - struct mmc_host *host; - uint max_blocks; - - brcmf_dbg(SDIO, "Enter\n"); - brcmf_dbg(SDIO, "Class=%x\n", func->class); - brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor); - brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); - brcmf_dbg(SDIO, "Function#: %d\n", func->num); - - /* Consume func num 1 but dont do anything with it. */ - if (func->num == 1) - return 0; - - /* Ignore anything but func 2 */ - if (func->num != 2) - return -ENODEV; - - bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL); - if (!bus_if) - return -ENOMEM; - sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL); - if (!sdiodev) { - kfree(bus_if); - return -ENOMEM; - } - - sdiodev->func[0] = func->card->sdio_func[0]; - sdiodev->func[1] = func->card->sdio_func[0]; - sdiodev->func[2] = func; - - sdiodev->bus_if = bus_if; - bus_if->bus_priv.sdio = sdiodev; - dev_set_drvdata(&func->dev, bus_if); - dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); - sdiodev->dev = &sdiodev->func[1]->dev; - sdiodev->pdata = brcmfmac_sdio_pdata; - - atomic_set(&sdiodev->suspend, false); - init_waitqueue_head(&sdiodev->request_byte_wait); - init_waitqueue_head(&sdiodev->request_word_wait); - init_waitqueue_head(&sdiodev->request_buffer_wait); - - brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n"); - err = brcmf_sdio_probe(sdiodev); - if (err) { - brcmf_err("F2 error, probe failed %d...\n", err); - goto fail; - } - - /* - * determine host related variables after brcmf_sdio_probe() - * as func->cur_blksize is properly set and F2 init has been - * completed successfully. - */ - host = func->card->host; - sdiodev->sg_support = host->max_segs > 1; - max_blocks = min_t(uint, host->max_blk_count, 511u); - sdiodev->max_request_size = min_t(uint, host->max_req_size, - max_blocks * func->cur_blksize); - sdiodev->max_segment_count = min_t(uint, host->max_segs, - SG_MAX_SINGLE_ALLOC); - sdiodev->max_segment_size = host->max_seg_size; - brcmf_dbg(SDIO, "F2 init completed...\n"); - return 0; - -fail: - dev_set_drvdata(&func->dev, NULL); - dev_set_drvdata(&sdiodev->func[1]->dev, NULL); - kfree(sdiodev); - kfree(bus_if); - return err; -} - -static void brcmf_ops_sdio_remove(struct sdio_func *func) -{ - struct brcmf_bus *bus_if; - struct brcmf_sdio_dev *sdiodev; - - brcmf_dbg(SDIO, "Enter\n"); - brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor); - brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); - brcmf_dbg(SDIO, "Function: %d\n", func->num); - - if (func->num != 1 && func->num != 2) - return; - - bus_if = dev_get_drvdata(&func->dev); - if (bus_if) { - sdiodev = bus_if->bus_priv.sdio; - brcmf_sdio_remove(sdiodev); - - dev_set_drvdata(&sdiodev->func[1]->dev, NULL); - dev_set_drvdata(&sdiodev->func[2]->dev, NULL); - - kfree(bus_if); - kfree(sdiodev); - } - - brcmf_dbg(SDIO, "Exit\n"); -} - -#ifdef CONFIG_PM_SLEEP -static int brcmf_sdio_suspend(struct device *dev) -{ - mmc_pm_flag_t sdio_flags; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; - int ret = 0; - - brcmf_dbg(SDIO, "\n"); - - atomic_set(&sdiodev->suspend, true); - - sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]); - if (!(sdio_flags & MMC_PM_KEEP_POWER)) { - brcmf_err("Host can't keep power while suspended\n"); - return -EINVAL; - } - - ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER); - if (ret) { - brcmf_err("Failed to set pm_flags\n"); - return ret; - } - - brcmf_sdio_wdtmr_enable(sdiodev, false); - - return ret; -} - -static int brcmf_sdio_resume(struct device *dev) -{ - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; - - brcmf_sdio_wdtmr_enable(sdiodev, true); - atomic_set(&sdiodev->suspend, false); - return 0; -} - -static const struct dev_pm_ops brcmf_sdio_pm_ops = { - .suspend = brcmf_sdio_suspend, - .resume = brcmf_sdio_resume, -}; -#endif /* CONFIG_PM_SLEEP */ - -static struct sdio_driver brcmf_sdmmc_driver = { - .probe = brcmf_ops_sdio_probe, - .remove = brcmf_ops_sdio_remove, - .name = BRCMFMAC_SDIO_PDATA_NAME, - .id_table = brcmf_sdmmc_ids, -#ifdef CONFIG_PM_SLEEP - .drv = { - .pm = &brcmf_sdio_pm_ops, - }, -#endif /* CONFIG_PM_SLEEP */ -}; - -static int brcmf_sdio_pd_probe(struct platform_device *pdev) -{ - brcmf_dbg(SDIO, "Enter\n"); - - brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev); - - if (brcmfmac_sdio_pdata->power_on) - brcmfmac_sdio_pdata->power_on(); - - return 0; -} - -static int brcmf_sdio_pd_remove(struct platform_device *pdev) -{ - brcmf_dbg(SDIO, "Enter\n"); - - if (brcmfmac_sdio_pdata->power_off) - brcmfmac_sdio_pdata->power_off(); - - sdio_unregister_driver(&brcmf_sdmmc_driver); - - return 0; -} - -static struct platform_driver brcmf_sdio_pd = { - .remove = brcmf_sdio_pd_remove, - .driver = { - .name = BRCMFMAC_SDIO_PDATA_NAME, - .owner = THIS_MODULE, - } -}; - -void brcmf_sdio_register(void) -{ - int ret; - - ret = sdio_register_driver(&brcmf_sdmmc_driver); - if (ret) - brcmf_err("sdio_register_driver failed: %d\n", ret); -} - -void brcmf_sdio_exit(void) -{ - brcmf_dbg(SDIO, "Enter\n"); - - if (brcmfmac_sdio_pdata) - platform_driver_unregister(&brcmf_sdio_pd); - else - sdio_unregister_driver(&brcmf_sdmmc_driver); -} - -void __init brcmf_sdio_init(void) -{ - int ret; - - brcmf_dbg(SDIO, "Enter\n"); - - ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); - if (ret == -ENODEV) - brcmf_dbg(SDIO, "No platform data available.\n"); -} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 899a2ada5b82..939d6b132922 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -21,481 +21,33 @@ #ifndef _BRCMF_H_ #define _BRCMF_H_ -#define BRCMF_VERSION_STR "4.218.248.5" - #include "fweh.h" -/******************************************************************************* - * IO codes that are interpreted by dongle firmware - ******************************************************************************/ -#define BRCMF_C_GET_VERSION 1 -#define BRCMF_C_UP 2 -#define BRCMF_C_DOWN 3 -#define BRCMF_C_SET_PROMISC 10 -#define BRCMF_C_GET_RATE 12 -#define BRCMF_C_GET_INFRA 19 -#define BRCMF_C_SET_INFRA 20 -#define BRCMF_C_GET_AUTH 21 -#define BRCMF_C_SET_AUTH 22 -#define BRCMF_C_GET_BSSID 23 -#define BRCMF_C_GET_SSID 25 -#define BRCMF_C_SET_SSID 26 -#define BRCMF_C_TERMINATED 28 -#define BRCMF_C_GET_CHANNEL 29 -#define BRCMF_C_SET_CHANNEL 30 -#define BRCMF_C_GET_SRL 31 -#define BRCMF_C_SET_SRL 32 -#define BRCMF_C_GET_LRL 33 -#define BRCMF_C_SET_LRL 34 -#define BRCMF_C_GET_RADIO 37 -#define BRCMF_C_SET_RADIO 38 -#define BRCMF_C_GET_PHYTYPE 39 -#define BRCMF_C_SET_KEY 45 -#define BRCMF_C_SET_PASSIVE_SCAN 49 -#define BRCMF_C_SCAN 50 -#define BRCMF_C_SCAN_RESULTS 51 -#define BRCMF_C_DISASSOC 52 -#define BRCMF_C_REASSOC 53 -#define BRCMF_C_SET_ROAM_TRIGGER 55 -#define BRCMF_C_SET_ROAM_DELTA 57 -#define BRCMF_C_GET_BCNPRD 75 -#define BRCMF_C_SET_BCNPRD 76 -#define BRCMF_C_GET_DTIMPRD 77 -#define BRCMF_C_SET_DTIMPRD 78 -#define BRCMF_C_SET_COUNTRY 84 -#define BRCMF_C_GET_PM 85 -#define BRCMF_C_SET_PM 86 -#define BRCMF_C_GET_CURR_RATESET 114 -#define BRCMF_C_GET_AP 117 -#define BRCMF_C_SET_AP 118 -#define BRCMF_C_GET_RSSI 127 -#define BRCMF_C_GET_WSEC 133 -#define BRCMF_C_SET_WSEC 134 -#define BRCMF_C_GET_PHY_NOISE 135 -#define BRCMF_C_GET_BSS_INFO 136 -#define BRCMF_C_GET_BANDLIST 140 -#define BRCMF_C_SET_SCB_TIMEOUT 158 -#define BRCMF_C_GET_PHYLIST 180 -#define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 -#define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 -#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define BRCMF_C_GET_VALID_CHANNELS 217 -#define BRCMF_C_GET_KEY_PRIMARY 235 -#define BRCMF_C_SET_KEY_PRIMARY 236 -#define BRCMF_C_SET_SCAN_PASSIVE_TIME 258 -#define BRCMF_C_GET_VAR 262 -#define BRCMF_C_SET_VAR 263 - -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 -#define WLC_PHY_TYPE_SSN 6 -#define WLC_PHY_TYPE_HT 7 -#define WLC_PHY_TYPE_LCN 8 -#define WLC_PHY_TYPE_NULL 0xf - #define TOE_TX_CSUM_OL 0x00000001 #define TOE_RX_CSUM_OL 0x00000002 -#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ - -/* size of brcmf_scan_params not including variable length array */ -#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 - -/* masks for channel and ssid count */ -#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff -#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 - -/* primary (ie tx) key */ -#define BRCMF_PRIMARY_KEY (1 << 1) - /* For supporting multiple interfaces */ #define BRCMF_MAX_IFS 16 -#define DOT11_BSSTYPE_ANY 2 #define DOT11_MAX_DEFAULT_KEYS 4 -#define BRCMF_ESCAN_REQ_VERSION 1 - -#define WLC_BSS_RSSI_ON_CHANNEL 0x0002 - -#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ -#define BRCMF_STA_ASSOC 0x10 /* Associated */ - -#define BRCMF_E_STATUS_SUCCESS 0 -#define BRCMF_E_STATUS_FAIL 1 -#define BRCMF_E_STATUS_TIMEOUT 2 -#define BRCMF_E_STATUS_NO_NETWORKS 3 -#define BRCMF_E_STATUS_ABORT 4 -#define BRCMF_E_STATUS_NO_ACK 5 -#define BRCMF_E_STATUS_UNSOLICITED 6 -#define BRCMF_E_STATUS_ATTEMPT 7 -#define BRCMF_E_STATUS_PARTIAL 8 -#define BRCMF_E_STATUS_NEWSCAN 9 -#define BRCMF_E_STATUS_NEWASSOC 10 -#define BRCMF_E_STATUS_11HQUIET 11 -#define BRCMF_E_STATUS_SUPPRESS 12 -#define BRCMF_E_STATUS_NOCHANS 13 -#define BRCMF_E_STATUS_CS_ABORT 15 -#define BRCMF_E_STATUS_ERROR 16 - -#define BRCMF_E_REASON_INITIAL_ASSOC 0 -#define BRCMF_E_REASON_LOW_RSSI 1 -#define BRCMF_E_REASON_DEAUTH 2 -#define BRCMF_E_REASON_DISASSOC 3 -#define BRCMF_E_REASON_BCNS_LOST 4 -#define BRCMF_E_REASON_MINTXRATE 9 -#define BRCMF_E_REASON_TXFAIL 10 - -#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 -#define BRCMF_E_REASON_FAST_ROAM_FAILED 5 -#define BRCMF_E_REASON_DIRECTED_ROAM 6 -#define BRCMF_E_REASON_TSPEC_REJECTED 7 -#define BRCMF_E_REASON_BETTER_AP 8 - -#define BRCMF_E_PRUNE_ENCR_MISMATCH 1 -#define BRCMF_E_PRUNE_BCAST_BSSID 2 -#define BRCMF_E_PRUNE_MAC_DENY 3 -#define BRCMF_E_PRUNE_MAC_NA 4 -#define BRCMF_E_PRUNE_REG_PASSV 5 -#define BRCMF_E_PRUNE_SPCT_MGMT 6 -#define BRCMF_E_PRUNE_RADAR 7 -#define BRCMF_E_RSN_MISMATCH 8 -#define BRCMF_E_PRUNE_NO_COMMON_RATES 9 -#define BRCMF_E_PRUNE_BASIC_RATES 10 -#define BRCMF_E_PRUNE_CIPHER_NA 12 -#define BRCMF_E_PRUNE_KNOWN_STA 13 -#define BRCMF_E_PRUNE_WDS_PEER 15 -#define BRCMF_E_PRUNE_QBSS_LOAD 16 -#define BRCMF_E_PRUNE_HOME_AP 17 - -#define BRCMF_E_SUP_OTHER 0 -#define BRCMF_E_SUP_DECRYPT_KEY_DATA 1 -#define BRCMF_E_SUP_BAD_UCAST_WEP128 2 -#define BRCMF_E_SUP_BAD_UCAST_WEP40 3 -#define BRCMF_E_SUP_UNSUP_KEY_LEN 4 -#define BRCMF_E_SUP_PW_KEY_CIPHER 5 -#define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6 -#define BRCMF_E_SUP_MSG3_IE_MISMATCH 7 -#define BRCMF_E_SUP_NO_INSTALL_FLAG 8 -#define BRCMF_E_SUP_MSG3_NO_GTK 9 -#define BRCMF_E_SUP_GRP_KEY_CIPHER 10 -#define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11 -#define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12 -#define BRCMF_E_SUP_SEND_FAIL 13 -#define BRCMF_E_SUP_DEAUTH 14 - -#define BRCMF_E_IF_ADD 1 -#define BRCMF_E_IF_DEL 2 -#define BRCMF_E_IF_CHANGE 3 - -#define BRCMF_E_IF_FLAG_NOIF 1 - -#define BRCMF_E_IF_ROLE_STA 0 -#define BRCMF_E_IF_ROLE_AP 1 -#define BRCMF_E_IF_ROLE_WDS 2 - -#define BRCMF_E_LINK_BCN_LOSS 1 -#define BRCMF_E_LINK_DISASSOC 2 -#define BRCMF_E_LINK_ASSOC_REC 3 -#define BRCMF_E_LINK_BSSCFG_DIS 4 - /* Small, medium and maximum buffer size for dcmd */ #define BRCMF_DCMD_SMLEN 256 #define BRCMF_DCMD_MEDLEN 1536 #define BRCMF_DCMD_MAXLEN 8192 -#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256 - -/* Pattern matching filter. Specifies an offset within received packets to - * start matching, the pattern to match, the size of the pattern, and a bitmask - * that indicates which bits within the pattern should be matched. - */ -struct brcmf_pkt_filter_pattern_le { - /* - * Offset within received packet to start pattern matching. - * Offset '0' is the first byte of the ethernet header. - */ - __le32 offset; - /* Size of the pattern. Bitmask must be the same size.*/ - __le32 size_bytes; - /* - * Variable length mask and pattern data. mask starts at offset 0. - * Pattern immediately follows mask. - */ - u8 mask_and_pattern[1]; -}; - -/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ -struct brcmf_pkt_filter_le { - __le32 id; /* Unique filter id, specified by app. */ - __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ - __le32 negate_match; /* Negate the result of filter matches */ - union { /* Filter definitions */ - struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */ - } u; -}; - -/* IOVAR "pkt_filter_enable" parameter. */ -struct brcmf_pkt_filter_enable_le { - __le32 id; /* Unique filter id */ - __le32 enable; /* Enable/disable bool */ -}; - -/* BSS info structure - * Applications MUST CHECK ie_offset field and length field to access IEs and - * next bss_info structure in a vector (in struct brcmf_scan_results) +/* IOCTL from host to device are limited in lenght. A device can only handle + * ethernet frame size. This limitation is to be applied by protocol layer. */ -struct brcmf_bss_info_le { - __le32 version; /* version field */ - __le32 length; /* byte length of data in this record, - * starting at version and including IEs - */ - u8 BSSID[ETH_ALEN]; - __le16 beacon_period; /* units are Kusec */ - __le16 capability; /* Capability information */ - u8 SSID_len; - u8 SSID[32]; - struct { - __le32 count; /* # rates in this set */ - u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - __le16 chanspec; /* chanspec for bss */ - __le16 atim_window; /* units are Kusec */ - u8 dtim_period; /* DTIM period */ - __le16 RSSI; /* receive signal strength (in dBm) */ - s8 phy_noise; /* noise (in dBm) */ - - u8 n_cap; /* BSS is 802.11N Capable */ - /* 802.11N BSS Capabilities (based on HT_CAP_*): */ - __le32 nbss_cap; - u8 ctl_ch; /* 802.11N BSS control channel number */ - __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ - u8 flags; /* flags */ - u8 reserved[3]; /* Reserved for expansion of BSS properties */ - u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ +#define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN) - __le16 ie_offset; /* offset at which IEs start, from beginning */ - __le32 ie_length; /* byte length of Information Elements */ - __le16 SNR; /* average SNR of during frame reception */ - /* Add new fields here */ - /* variable length Information Elements */ -}; - -struct brcm_rateset_le { - /* # rates in this set */ - __le32 count; - /* rates in 500kbps units w/hi bit set if basic */ - u8 rates[BRCMF_MAXRATES_IN_SET]; -}; - -struct brcmf_ssid { - u32 SSID_len; - unsigned char SSID[32]; -}; - -struct brcmf_ssid_le { - __le32 SSID_len; - unsigned char SSID[32]; -}; - -struct brcmf_scan_params_le { - struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ - u8 bssid[ETH_ALEN]; /* default: bcast */ - s8 bss_type; /* default: any, - * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT - */ - u8 scan_type; /* flags, 0 use default */ - __le32 nprobes; /* -1 use default, number of probes per channel */ - __le32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - __le32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - __le32 home_time; /* -1 use default, dwell time for the - * home channel between channel scans - */ - __le32 channel_num; /* count of channels and ssids that follow - * - * low half is count of channels in - * channel_list, 0 means default (use all - * available channels) - * - * high half is entries in struct brcmf_ssid - * array that follows channel_list, aligned for - * s32 (4 bytes) meaning an odd channel count - * implies a 2-byte pad between end of - * channel_list and first ssid - * - * if ssid count is zero, single ssid in the - * fixed parameter portion is assumed, otherwise - * ssid in the fixed portion is ignored - */ - __le16 channel_list[1]; /* list of chanspecs */ -}; - -struct brcmf_scan_results { - u32 buflen; - u32 version; - u32 count; - struct brcmf_bss_info_le bss_info_le[]; -}; - -struct brcmf_escan_params_le { - __le32 version; - __le16 action; - __le16 sync_id; - struct brcmf_scan_params_le params_le; -}; - -struct brcmf_escan_result_le { - __le32 buflen; - __le32 version; - __le16 sync_id; - __le16 bss_count; - struct brcmf_bss_info_le bss_info_le; -}; - -#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ - sizeof(struct brcmf_bss_info_le)) - -/* used for association with a specific BSSID and chanspec list */ -struct brcmf_assoc_params_le { - /* 00:00:00:00:00:00: broadcast scan */ - u8 bssid[ETH_ALEN]; - /* 0: all available channels, otherwise count of chanspecs in - * chanspec_list */ - __le32 chanspec_num; - /* list of chanspecs */ - __le16 chanspec_list[1]; -}; - -/* used for join with or without a specific bssid and channel list */ -struct brcmf_join_params { - struct brcmf_ssid_le ssid_le; - struct brcmf_assoc_params_le params_le; -}; - -/* scan params for extended join */ -struct brcmf_join_scan_params_le { - u8 scan_type; /* 0 use default, active or passive scan */ - __le32 nprobes; /* -1 use default, nr of probes per channel */ - __le32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - __le32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - __le32 home_time; /* -1 use default, dwell time for the home - * channel between channel scans - */ -}; - -/* extended join params */ -struct brcmf_ext_join_params_le { - struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ - struct brcmf_join_scan_params_le scan_le; - struct brcmf_assoc_params_le assoc_le; -}; - -struct brcmf_wsec_key { - u32 index; /* key index */ - u32 len; /* key length */ - u8 data[WLAN_MAX_KEY_LEN]; /* key data */ - u32 pad_1[18]; - u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - u32 flags; /* misc flags */ - u32 pad_2[3]; - u32 iv_initialized; /* has IV been initialized already? */ - u32 pad_3; - /* Rx IV */ - struct { - u32 hi; /* upper 32 bits of IV */ - u16 lo; /* lower 16 bits of IV */ - } rxiv; - u32 pad_4[2]; - u8 ea[ETH_ALEN]; /* per station */ -}; - -/* - * dongle requires same struct as above but with fields in little endian order - */ -struct brcmf_wsec_key_le { - __le32 index; /* key index */ - __le32 len; /* key length */ - u8 data[WLAN_MAX_KEY_LEN]; /* key data */ - __le32 pad_1[18]; - __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - __le32 flags; /* misc flags */ - __le32 pad_2[3]; - __le32 iv_initialized; /* has IV been initialized already? */ - __le32 pad_3; - /* Rx IV */ - struct { - __le32 hi; /* upper 32 bits of IV */ - __le16 lo; /* lower 16 bits of IV */ - } rxiv; - __le32 pad_4[2]; - u8 ea[ETH_ALEN]; /* per station */ -}; - -/* Used to get specific STA parameters */ -struct brcmf_scb_val_le { - __le32 val; - u8 ea[ETH_ALEN]; -}; - -/* channel encoding */ -struct brcmf_channel_info_le { - __le32 hw_channel; - __le32 target_channel; - __le32 scan_channel; -}; - -struct brcmf_sta_info_le { - __le16 ver; /* version of this struct */ - __le16 len; /* length in bytes of this structure */ - __le16 cap; /* sta's advertised capabilities */ - __le32 flags; /* flags defined below */ - __le32 idle; /* time since data pkt rx'd from sta */ - u8 ea[ETH_ALEN]; /* Station address */ - __le32 count; /* # rates in this set */ - u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ - /* w/hi bit set if basic */ - __le32 in; /* seconds elapsed since associated */ - __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ - __le32 tx_pkts; /* # of packets transmitted */ - __le32 tx_failures; /* # of packets failed */ - __le32 rx_ucast_pkts; /* # of unicast packets received */ - __le32 rx_mcast_pkts; /* # of multicast packets received */ - __le32 tx_rate; /* Rate of last successful tx frame */ - __le32 rx_rate; /* Rate of last successful rx frame */ - __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ - __le32 rx_decrypt_failures; /* # of packet decrypted failed */ -}; - -struct brcmf_chanspec_list { - __le32 count; /* # of entries */ - __le32 element[1]; /* variable length uint32 list */ -}; +#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256 -/* - * WLC_E_PROBRESP_MSG - * WLC_E_P2P_PROBREQ_MSG - * WLC_E_ACTION_FRAME_RX +/* Length of firmware version string stored for + * ethtool driver info which uses 32 bytes as well. */ -struct brcmf_rx_mgmt_data { - __be16 version; - __be16 chanspec; - __be32 rssi; - __be32 mactime; - __be32 rate; -}; +#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32 /* Bus independent dongle command */ struct brcmf_dcmd { @@ -535,7 +87,7 @@ struct brcmf_fws_info; /* firmware signalling info */ struct brcmf_pub { /* Linkage ponters */ struct brcmf_bus *bus_if; - struct brcmf_proto *prot; + struct brcmf_proto *proto; struct brcmf_cfg80211_info *config; /* Internal brcmf items */ @@ -544,7 +96,7 @@ struct brcmf_pub { u8 wme_dp; /* wme discard priority */ /* Dongle media info */ - unsigned long drv_version; /* Version of dongle-resident driver */ + char fwver[BRCMF_DRIVER_FIRMWARE_VERSION_LEN]; u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */ /* Multicast data packets sent to dongle */ @@ -566,14 +118,6 @@ struct brcmf_pub { #endif }; -struct brcmf_if_event { - u8 ifidx; - u8 action; - u8 flags; - u8 bssidx; - u8 role; -}; - /* forward declarations */ struct brcmf_cfg80211_vif; struct brcmf_fws_mac_descriptor; @@ -635,16 +179,6 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev); /* Return pointer to interface name */ char *brcmf_ifname(struct brcmf_pub *drvr, int idx); -/* Query dongle */ -int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len); -int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len); - -/* Remove any protocol-specific data header. */ -int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, - struct sk_buff *rxp); - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr); @@ -655,4 +189,7 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp); void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, bool success); +/* Sets dongle media info (drv_version, mac address). */ +int brcmf_c_preinit_dcmds(struct brcmf_if *ifp); + #endif /* _BRCMF_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index a6eb09e5d46f..5c12a07673fa 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -24,6 +24,12 @@ enum brcmf_bus_state { BRCMF_BUS_DATA /* Ready for frame transfers */ }; +/* The level of bus communication with the dongle */ +enum brcmf_bus_protocol_type { + BRCMF_PROTO_BCDC, + BRCMF_PROTO_MSGBUF +}; + struct brcmf_bus_dcmd { char *name; char *param; @@ -34,6 +40,7 @@ struct brcmf_bus_dcmd { /** * struct brcmf_bus_ops - bus callback operations. * + * @preinit: execute bus/device specific dongle init commands (optional). * @init: prepare for communication with dongle. * @stop: clear pending frames, disable data flow. * @txdata: send a data frame to the dongle. When the data @@ -51,6 +58,7 @@ struct brcmf_bus_dcmd { * indicated otherwise these callbacks are mandatory. */ struct brcmf_bus_ops { + int (*preinit)(struct device *dev); int (*init)(struct device *dev); void (*stop)(struct device *dev); int (*txdata)(struct device *dev, struct sk_buff *skb); @@ -63,6 +71,7 @@ struct brcmf_bus_ops { * struct brcmf_bus - interface structure between common and bus layer * * @bus_priv: pointer to private bus device. + * @proto_type: protocol type, bcdc or msgbuf * @dev: device pointer of bus device. * @drvr: public driver information. * @state: operational state of the bus interface. @@ -78,6 +87,7 @@ struct brcmf_bus { struct brcmf_sdio_dev *sdio; struct brcmf_usbdev *usb; } bus_priv; + enum brcmf_bus_protocol_type proto_type; struct device *dev; struct brcmf_pub *drvr; enum brcmf_bus_state state; @@ -85,7 +95,6 @@ struct brcmf_bus { unsigned long tx_realloc; u32 chip; u32 chiprev; - struct list_head dcmd_list; struct brcmf_bus_ops *ops; }; @@ -93,6 +102,13 @@ struct brcmf_bus { /* * callback wrappers */ +static inline int brcmf_bus_preinit(struct brcmf_bus *bus) +{ + if (!bus->ops->preinit) + return 0; + return bus->ops->preinit(bus->dev); +} + static inline int brcmf_bus_init(struct brcmf_bus *bus) { return bus->ops->init(bus->dev); @@ -139,7 +155,7 @@ bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp); /* Indication from bus module regarding presence/insertion of dongle. */ -int brcmf_attach(uint bus_hdrlen, struct device *dev); +int brcmf_attach(struct device *dev); /* Indication from bus module regarding removal/absence of dongle */ void brcmf_detach(struct device *dev); /* Indication from bus module that dongle should be reset */ @@ -151,6 +167,9 @@ void brcmf_txflowblock(struct device *dev, bool state); void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success); int brcmf_bus_start(struct device *dev); +s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, + u32 len); +void brcmf_bus_add_txhdrlen(struct device *dev, uint len); #ifdef CONFIG_BRCMFMAC_SDIO void brcmf_sdio_exit(void); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c deleted file mode 100644 index dd85401063cb..000000000000 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ /dev/null @@ -1,392 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -/******************************************************************************* - * Communicates with the dongle by using dcmd codes. - * For certain dcmd codes, the dongle interprets string data from the host. - ******************************************************************************/ - -#include <linux/types.h> -#include <linux/netdevice.h> - -#include <brcmu_utils.h> -#include <brcmu_wifi.h> - -#include "dhd.h" -#include "dhd_proto.h" -#include "dhd_bus.h" -#include "fwsignal.h" -#include "dhd_dbg.h" -#include "tracepoint.h" - -struct brcmf_proto_cdc_dcmd { - __le32 cmd; /* dongle command value */ - __le32 len; /* lower 16: output buflen; - * upper 16: input buflen (excludes header) */ - __le32 flags; /* flag defns given below */ - __le32 status; /* status code returned from the device */ -}; - -/* Max valid buffer size that can be sent to the dongle */ -#define CDC_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN) - -/* CDC flag definitions */ -#define CDC_DCMD_ERROR 0x01 /* 1=cmd failed */ -#define CDC_DCMD_SET 0x02 /* 0=get, 1=set cmd */ -#define CDC_DCMD_IF_MASK 0xF000 /* I/F index */ -#define CDC_DCMD_IF_SHIFT 12 -#define CDC_DCMD_ID_MASK 0xFFFF0000 /* id an cmd pairing */ -#define CDC_DCMD_ID_SHIFT 16 /* ID Mask shift bits */ -#define CDC_DCMD_ID(flags) \ - (((flags) & CDC_DCMD_ID_MASK) >> CDC_DCMD_ID_SHIFT) - -/* - * BDC header - Broadcom specific extension of CDC. - * Used on data packets to convey priority across USB. - */ -#define BDC_HEADER_LEN 4 -#define BDC_PROTO_VER 2 /* Protocol version */ -#define BDC_FLAG_VER_MASK 0xf0 /* Protocol version mask */ -#define BDC_FLAG_VER_SHIFT 4 /* Protocol version shift */ -#define BDC_FLAG_SUM_GOOD 0x04 /* Good RX checksums */ -#define BDC_FLAG_SUM_NEEDED 0x08 /* Dongle needs to do TX checksums */ -#define BDC_PRIORITY_MASK 0x7 -#define BDC_FLAG2_IF_MASK 0x0f /* packet rx interface in APSTA */ -#define BDC_FLAG2_IF_SHIFT 0 - -#define BDC_GET_IF_IDX(hdr) \ - ((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT)) -#define BDC_SET_IF_IDX(hdr, idx) \ - ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | \ - ((idx) << BDC_FLAG2_IF_SHIFT))) - -/** - * struct brcmf_proto_bdc_header - BDC header format - * - * @flags: flags contain protocol and checksum info. - * @priority: 802.1d priority and USB flow control info (bit 4:7). - * @flags2: additional flags containing dongle interface index. - * @data_offset: start of packet data. header is following by firmware signals. - */ -struct brcmf_proto_bdc_header { - u8 flags; - u8 priority; - u8 flags2; - u8 data_offset; -}; - -/* - * maximum length of firmware signal data between - * the BDC header and packet data in the tx path. - */ -#define BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES 12 - -#define RETRIES 2 /* # of retries to retrieve matching dcmd response */ -#define BUS_HEADER_LEN (16+64) /* Must be atleast SDPCM_RESERVE - * (amount of header tha might be added) - * plus any space that might be needed - * for bus alignment padding. - */ -#define ROUND_UP_MARGIN 2048 /* Biggest bus block size possible for - * round off at the end of buffer - * Currently is SDIO - */ - -struct brcmf_proto { - u16 reqid; - u8 bus_header[BUS_HEADER_LEN]; - struct brcmf_proto_cdc_dcmd msg; - unsigned char buf[BRCMF_DCMD_MAXLEN + ROUND_UP_MARGIN]; -}; - -static int brcmf_proto_cdc_msg(struct brcmf_pub *drvr) -{ - struct brcmf_proto *prot = drvr->prot; - int len = le32_to_cpu(prot->msg.len) + - sizeof(struct brcmf_proto_cdc_dcmd); - - brcmf_dbg(CDC, "Enter\n"); - - /* NOTE : cdc->msg.len holds the desired length of the buffer to be - * returned. Only up to CDC_MAX_MSG_SIZE of this buffer area - * is actually sent to the dongle - */ - if (len > CDC_MAX_MSG_SIZE) - len = CDC_MAX_MSG_SIZE; - - /* Send request */ - return brcmf_bus_txctl(drvr->bus_if, (unsigned char *)&prot->msg, len); -} - -static int brcmf_proto_cdc_cmplt(struct brcmf_pub *drvr, u32 id, u32 len) -{ - int ret; - struct brcmf_proto *prot = drvr->prot; - - brcmf_dbg(CDC, "Enter\n"); - len += sizeof(struct brcmf_proto_cdc_dcmd); - do { - ret = brcmf_bus_rxctl(drvr->bus_if, (unsigned char *)&prot->msg, - len); - if (ret < 0) - break; - } while (CDC_DCMD_ID(le32_to_cpu(prot->msg.flags)) != id); - - return ret; -} - -int -brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len) -{ - struct brcmf_proto *prot = drvr->prot; - struct brcmf_proto_cdc_dcmd *msg = &prot->msg; - void *info; - int ret = 0, retries = 0; - u32 id, flags; - - brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); - - memset(msg, 0, sizeof(struct brcmf_proto_cdc_dcmd)); - - msg->cmd = cpu_to_le32(cmd); - msg->len = cpu_to_le32(len); - flags = (++prot->reqid << CDC_DCMD_ID_SHIFT); - flags = (flags & ~CDC_DCMD_IF_MASK) | - (ifidx << CDC_DCMD_IF_SHIFT); - msg->flags = cpu_to_le32(flags); - - if (buf) - memcpy(prot->buf, buf, len); - - ret = brcmf_proto_cdc_msg(drvr); - if (ret < 0) { - brcmf_err("brcmf_proto_cdc_msg failed w/status %d\n", - ret); - goto done; - } - -retry: - /* wait for interrupt and get first fragment */ - ret = brcmf_proto_cdc_cmplt(drvr, prot->reqid, len); - if (ret < 0) - goto done; - - flags = le32_to_cpu(msg->flags); - id = (flags & CDC_DCMD_ID_MASK) >> CDC_DCMD_ID_SHIFT; - - if ((id < prot->reqid) && (++retries < RETRIES)) - goto retry; - if (id != prot->reqid) { - brcmf_err("%s: unexpected request id %d (expected %d)\n", - brcmf_ifname(drvr, ifidx), id, prot->reqid); - ret = -EINVAL; - goto done; - } - - /* Check info buffer */ - info = (void *)&msg[1]; - - /* Copy info buffer */ - if (buf) { - if (ret < (int)len) - len = ret; - memcpy(buf, info, len); - } - - /* Check the ERROR flag */ - if (flags & CDC_DCMD_ERROR) - ret = le32_to_cpu(msg->status); - -done: - return ret; -} - -int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len) -{ - struct brcmf_proto *prot = drvr->prot; - struct brcmf_proto_cdc_dcmd *msg = &prot->msg; - int ret = 0; - u32 flags, id; - - brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); - - memset(msg, 0, sizeof(struct brcmf_proto_cdc_dcmd)); - - msg->cmd = cpu_to_le32(cmd); - msg->len = cpu_to_le32(len); - flags = (++prot->reqid << CDC_DCMD_ID_SHIFT) | CDC_DCMD_SET; - flags = (flags & ~CDC_DCMD_IF_MASK) | - (ifidx << CDC_DCMD_IF_SHIFT); - msg->flags = cpu_to_le32(flags); - - if (buf) - memcpy(prot->buf, buf, len); - - ret = brcmf_proto_cdc_msg(drvr); - if (ret < 0) - goto done; - - ret = brcmf_proto_cdc_cmplt(drvr, prot->reqid, len); - if (ret < 0) - goto done; - - flags = le32_to_cpu(msg->flags); - id = (flags & CDC_DCMD_ID_MASK) >> CDC_DCMD_ID_SHIFT; - - if (id != prot->reqid) { - brcmf_err("%s: unexpected request id %d (expected %d)\n", - brcmf_ifname(drvr, ifidx), id, prot->reqid); - ret = -EINVAL; - goto done; - } - - /* Check the ERROR flag */ - if (flags & CDC_DCMD_ERROR) - ret = le32_to_cpu(msg->status); - -done: - return ret; -} - -static bool pkt_sum_needed(struct sk_buff *skb) -{ - return skb->ip_summed == CHECKSUM_PARTIAL; -} - -static void pkt_set_sum_good(struct sk_buff *skb, bool x) -{ - skb->ip_summed = (x ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE); -} - -void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, u8 offset, - struct sk_buff *pktbuf) -{ - struct brcmf_proto_bdc_header *h; - - brcmf_dbg(CDC, "Enter\n"); - - /* Push BDC header used to convey priority for buses that don't */ - skb_push(pktbuf, BDC_HEADER_LEN); - - h = (struct brcmf_proto_bdc_header *)(pktbuf->data); - - h->flags = (BDC_PROTO_VER << BDC_FLAG_VER_SHIFT); - if (pkt_sum_needed(pktbuf)) - h->flags |= BDC_FLAG_SUM_NEEDED; - - h->priority = (pktbuf->priority & BDC_PRIORITY_MASK); - h->flags2 = 0; - h->data_offset = offset; - BDC_SET_IF_IDX(h, ifidx); - trace_brcmf_bdchdr(pktbuf->data); -} - -int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, - struct sk_buff *pktbuf) -{ - struct brcmf_proto_bdc_header *h; - - brcmf_dbg(CDC, "Enter\n"); - - /* Pop BDC header used to convey priority for buses that don't */ - - if (pktbuf->len <= BDC_HEADER_LEN) { - brcmf_dbg(INFO, "rx data too short (%d <= %d)\n", - pktbuf->len, BDC_HEADER_LEN); - return -EBADE; - } - - trace_brcmf_bdchdr(pktbuf->data); - h = (struct brcmf_proto_bdc_header *)(pktbuf->data); - - *ifidx = BDC_GET_IF_IDX(h); - if (*ifidx >= BRCMF_MAX_IFS) { - brcmf_err("rx data ifnum out of range (%d)\n", *ifidx); - return -EBADE; - } - /* The ifidx is the idx to map to matching netdev/ifp. When receiving - * events this is easy because it contains the bssidx which maps - * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. - * bssidx 1 is used for p2p0 and no data can be received or - * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 - */ - if (*ifidx) - (*ifidx)++; - - if (((h->flags & BDC_FLAG_VER_MASK) >> BDC_FLAG_VER_SHIFT) != - BDC_PROTO_VER) { - brcmf_err("%s: non-BDC packet received, flags 0x%x\n", - brcmf_ifname(drvr, *ifidx), h->flags); - return -EBADE; - } - - if (h->flags & BDC_FLAG_SUM_GOOD) { - brcmf_dbg(CDC, "%s: BDC rcv, good checksum, flags 0x%x\n", - brcmf_ifname(drvr, *ifidx), h->flags); - pkt_set_sum_good(pktbuf, true); - } - - pktbuf->priority = h->priority & BDC_PRIORITY_MASK; - - skb_pull(pktbuf, BDC_HEADER_LEN); - if (do_fws) - brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf); - else - skb_pull(pktbuf, h->data_offset << 2); - - if (pktbuf->len == 0) - return -ENODATA; - return 0; -} - -int brcmf_proto_attach(struct brcmf_pub *drvr) -{ - struct brcmf_proto *cdc; - - cdc = kzalloc(sizeof(struct brcmf_proto), GFP_ATOMIC); - if (!cdc) - goto fail; - - /* ensure that the msg buf directly follows the cdc msg struct */ - if ((unsigned long)(&cdc->msg + 1) != (unsigned long)cdc->buf) { - brcmf_err("struct brcmf_proto is not correctly defined\n"); - goto fail; - } - - drvr->prot = cdc; - drvr->hdrlen += BDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; - drvr->bus_if->maxctl = BRCMF_DCMD_MAXLEN + - sizeof(struct brcmf_proto_cdc_dcmd) + ROUND_UP_MARGIN; - return 0; - -fail: - kfree(cdc); - return -ENOMEM; -} - -/* ~NOTE~ What if another thread is waiting on the semaphore? Holding it? */ -void brcmf_proto_detach(struct brcmf_pub *drvr) -{ - kfree(drvr->prot); - drvr->prot = NULL; -} - -void brcmf_proto_stop(struct brcmf_pub *drvr) -{ - /* Nothing to do for CDC */ -} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index 9431af2465f3..6a8983a1fb9c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -21,9 +21,9 @@ #include <brcmu_utils.h> #include "dhd.h" #include "dhd_bus.h" -#include "dhd_proto.h" #include "dhd_dbg.h" #include "fwil.h" +#include "fwil_types.h" #include "tracepoint.h" #define PKTFILTER_BUF_SIZE 128 @@ -32,15 +32,6 @@ #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 #define BRCMF_DEFAULT_PACKET_FILTER "100 0 0 0 0x01 0x00" -#ifdef DEBUG -static const char brcmf_version[] = - "Dongle Host Driver, version " BRCMF_VERSION_STR "\nCompiled on " - __DATE__ " at " __TIME__; -#else -static const char brcmf_version[] = - "Dongle Host Driver, version " BRCMF_VERSION_STR; -#endif - bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, int prec) @@ -257,8 +248,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) u8 buf[BRCMF_DCMD_SMLEN]; char *ptr; s32 err; - struct brcmf_bus_dcmd *cmdlst; - struct list_head *cur, *q; /* retreive mac address */ err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr, @@ -281,9 +270,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) } ptr = (char *)buf; strsep(&ptr, "\n"); + /* Print fw version info */ brcmf_err("Firmware version = %s\n", buf); + /* locate firmware version number for ethtool */ + ptr = strrchr(buf, ' ') + 1; + strlcpy(ifp->drvr->fwver, ptr, sizeof(ifp->drvr->fwver)); + /* * Setup timeout if Beacons are lost and roam is off to report * link down @@ -342,17 +336,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) brcmf_c_pktfilter_offload_enable(ifp, BRCMF_DEFAULT_PACKET_FILTER, 0, true); - /* set bus specific command if there is any */ - list_for_each_safe(cur, q, &ifp->drvr->bus_if->dcmd_list) { - cmdlst = list_entry(cur, struct brcmf_bus_dcmd, list); - if (cmdlst->name && cmdlst->param && cmdlst->param_len) { - brcmf_fil_iovar_data_set(ifp, cmdlst->name, - cmdlst->param, - cmdlst->param_len); - } - list_del(cur); - kfree(cmdlst); - } + /* do bus specific preinit here */ + err = brcmf_bus_preinit(ifp->drvr->bus_if); done: return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c index 0f9e9057e7dd..03fe8aca4d32 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c @@ -22,7 +22,6 @@ #include "dhd.h" #include "dhd_bus.h" #include "dhd_dbg.h" -#include "tracepoint.h" static struct dentry *root_folder; @@ -42,6 +41,40 @@ void brcmf_debugfs_exit(void) root_folder = NULL; } +static +ssize_t brcmf_debugfs_chipinfo_read(struct file *f, char __user *data, + size_t count, loff_t *ppos) +{ + struct brcmf_pub *drvr = f->private_data; + struct brcmf_bus *bus = drvr->bus_if; + char buf[40]; + int res; + + /* only allow read from start */ + if (*ppos > 0) + return 0; + + res = scnprintf(buf, sizeof(buf), "chip: %x(%u) rev %u\n", + bus->chip, bus->chip, bus->chiprev); + return simple_read_from_buffer(data, count, ppos, buf, res); +} + +static const struct file_operations brcmf_debugfs_chipinfo_ops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = brcmf_debugfs_chipinfo_read +}; + +static int brcmf_debugfs_create_chipinfo(struct brcmf_pub *drvr) +{ + struct dentry *dentry = drvr->dbgfs_dir; + + if (!IS_ERR_OR_NULL(dentry)) + debugfs_create_file("chipinfo", S_IRUGO, dentry, drvr, + &brcmf_debugfs_chipinfo_ops); + return 0; +} + int brcmf_debugfs_attach(struct brcmf_pub *drvr) { struct device *dev = drvr->bus_if->dev; @@ -50,6 +83,7 @@ int brcmf_debugfs_attach(struct brcmf_pub *drvr) return -ENODEV; drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder); + brcmf_debugfs_create_chipinfo(drvr); return PTR_ERR_OR_ZERO(drvr->dbgfs_dir); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index 0af1f5dc583a..ef52ed7abc69 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -33,7 +33,7 @@ #define BRCMF_USB_VAL 0x00002000 #define BRCMF_SCAN_VAL 0x00004000 #define BRCMF_CONN_VAL 0x00008000 -#define BRCMF_CDC_VAL 0x00010000 +#define BRCMF_BCDC_VAL 0x00010000 #define BRCMF_SDIO_VAL 0x00020000 /* set default print format */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 64e9cff241b9..af39edae8c62 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -24,13 +24,13 @@ #include "dhd.h" #include "dhd_bus.h" -#include "dhd_proto.h" #include "dhd_dbg.h" #include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" #include "fwsignal.h" +#include "proto.h" MODULE_AUTHOR("Broadcom Corporation"); MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); @@ -592,28 +592,6 @@ static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) return &ifp->stats; } -/* - * Set current toe component enables in toe_ol iovar, - * and set toe global enable iovar - */ -static int brcmf_toe_set(struct brcmf_if *ifp, u32 toe_ol) -{ - s32 err; - - err = brcmf_fil_iovar_int_set(ifp, "toe_ol", toe_ol); - if (err < 0) { - brcmf_err("Setting toe_ol failed, %d\n", err); - return err; - } - - err = brcmf_fil_iovar_int_set(ifp, "toe", (toe_ol != 0)); - if (err < 0) - brcmf_err("Setting toe failed, %d\n", err); - - return err; - -} - static void brcmf_ethtool_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) { @@ -621,8 +599,8 @@ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev, struct brcmf_pub *drvr = ifp->drvr; strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); - snprintf(info->version, sizeof(info->version), "%lu", - drvr->drv_version); + snprintf(info->version, sizeof(info->version), "n/a"); + strlcpy(info->fw_version, drvr->fwver, sizeof(info->fw_version)); strlcpy(info->bus_info, dev_name(drvr->bus_if->dev), sizeof(info->bus_info)); } @@ -631,124 +609,6 @@ static const struct ethtool_ops brcmf_ethtool_ops = { .get_drvinfo = brcmf_ethtool_get_drvinfo, }; -static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) -{ - struct brcmf_pub *drvr = ifp->drvr; - struct ethtool_drvinfo info; - char drvname[sizeof(info.driver)]; - u32 cmd; - struct ethtool_value edata; - u32 toe_cmpnt, csum_dir; - int ret; - - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); - - /* all ethtool calls start with a cmd word */ - if (copy_from_user(&cmd, uaddr, sizeof(u32))) - return -EFAULT; - - switch (cmd) { - case ETHTOOL_GDRVINFO: - /* Copy out any request driver name */ - if (copy_from_user(&info, uaddr, sizeof(info))) - return -EFAULT; - strncpy(drvname, info.driver, sizeof(info.driver)); - drvname[sizeof(info.driver) - 1] = '\0'; - - /* clear struct for return */ - memset(&info, 0, sizeof(info)); - info.cmd = cmd; - - /* if requested, identify ourselves */ - if (strcmp(drvname, "?dhd") == 0) { - sprintf(info.driver, "dhd"); - strcpy(info.version, BRCMF_VERSION_STR); - } - /* report dongle driver type */ - else - sprintf(info.driver, "wl"); - - sprintf(info.version, "%lu", drvr->drv_version); - if (copy_to_user(uaddr, &info, sizeof(info))) - return -EFAULT; - brcmf_dbg(TRACE, "given %*s, returning %s\n", - (int)sizeof(drvname), drvname, info.driver); - break; - - /* Get toe offload components from dongle */ - case ETHTOOL_GRXCSUM: - case ETHTOOL_GTXCSUM: - ret = brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_cmpnt); - if (ret < 0) - return ret; - - csum_dir = - (cmd == ETHTOOL_GTXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL; - - edata.cmd = cmd; - edata.data = (toe_cmpnt & csum_dir) ? 1 : 0; - - if (copy_to_user(uaddr, &edata, sizeof(edata))) - return -EFAULT; - break; - - /* Set toe offload components in dongle */ - case ETHTOOL_SRXCSUM: - case ETHTOOL_STXCSUM: - if (copy_from_user(&edata, uaddr, sizeof(edata))) - return -EFAULT; - - /* Read the current settings, update and write back */ - ret = brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_cmpnt); - if (ret < 0) - return ret; - - csum_dir = - (cmd == ETHTOOL_STXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL; - - if (edata.data != 0) - toe_cmpnt |= csum_dir; - else - toe_cmpnt &= ~csum_dir; - - ret = brcmf_toe_set(ifp, toe_cmpnt); - if (ret < 0) - return ret; - - /* If setting TX checksum mode, tell Linux the new mode */ - if (cmd == ETHTOOL_STXCSUM) { - if (edata.data) - ifp->ndev->features |= NETIF_F_IP_CSUM; - else - ifp->ndev->features &= ~NETIF_F_IP_CSUM; - } - - break; - - default: - return -EOPNOTSUPP; - } - - return 0; -} - -static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, - int cmd) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_pub *drvr = ifp->drvr; - - brcmf_dbg(TRACE, "Enter, idx=%d, cmd=0x%04x\n", ifp->bssidx, cmd); - - if (!drvr->iflist[ifp->bssidx]) - return -1; - - if (cmd == SIOCETHTOOL) - return brcmf_ethtool(ifp, ifr->ifr_data); - - return -EOPNOTSUPP; -} - static int brcmf_netdev_stop(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); @@ -769,7 +629,6 @@ static int brcmf_netdev_open(struct net_device *ndev) struct brcmf_pub *drvr = ifp->drvr; struct brcmf_bus *bus_if = drvr->bus_if; u32 toe_ol; - s32 ret = 0; brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); @@ -788,21 +647,20 @@ static int brcmf_netdev_open(struct net_device *ndev) else ndev->features &= ~NETIF_F_IP_CSUM; - /* Allow transmit calls */ - netif_start_queue(ndev); if (brcmf_cfg80211_up(ndev)) { brcmf_err("failed to bring up cfg80211\n"); - return -1; + return -EIO; } - return ret; + /* Allow transmit calls */ + netif_start_queue(ndev); + return 0; } static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_open = brcmf_netdev_open, .ndo_stop = brcmf_netdev_stop, .ndo_get_stats = brcmf_netdev_get_stats, - .ndo_do_ioctl = brcmf_netdev_ioctl_entry, .ndo_start_xmit = brcmf_netdev_start_xmit, .ndo_set_mac_address = brcmf_netdev_set_mac_address, .ndo_set_rx_mode = brcmf_netdev_set_multicast_list @@ -844,7 +702,7 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); - ndev->destructor = free_netdev; + ndev->destructor = brcmf_cfg80211_free_netdev; return 0; fail: @@ -868,13 +726,6 @@ static int brcmf_net_p2p_stop(struct net_device *ndev) return brcmf_cfg80211_down(ndev); } -static int brcmf_net_p2p_do_ioctl(struct net_device *ndev, - struct ifreq *ifr, int cmd) -{ - brcmf_dbg(TRACE, "Enter\n"); - return 0; -} - static netdev_tx_t brcmf_net_p2p_start_xmit(struct sk_buff *skb, struct net_device *ndev) { @@ -887,7 +738,6 @@ static netdev_tx_t brcmf_net_p2p_start_xmit(struct sk_buff *skb, static const struct net_device_ops brcmf_netdev_ops_p2p = { .ndo_open = brcmf_net_p2p_open, .ndo_stop = brcmf_net_p2p_stop, - .ndo_do_ioctl = brcmf_net_p2p_do_ioctl, .ndo_start_xmit = brcmf_net_p2p_start_xmit }; @@ -1009,14 +859,12 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) } /* unregister will take care of freeing it */ unregister_netdev(ifp->ndev); - if (bssidx == 0) - brcmf_cfg80211_detach(drvr->config); } else { kfree(ifp); } } -int brcmf_attach(uint bus_hdrlen, struct device *dev) +int brcmf_attach(struct device *dev) { struct brcmf_pub *drvr = NULL; int ret = 0; @@ -1031,7 +879,7 @@ int brcmf_attach(uint bus_hdrlen, struct device *dev) mutex_init(&drvr->proto_block); /* Link to bus module */ - drvr->hdrlen = bus_hdrlen; + drvr->hdrlen = 0; drvr->bus_if = dev_get_drvdata(dev); drvr->bus_if->drvr = drvr; @@ -1048,8 +896,6 @@ int brcmf_attach(uint bus_hdrlen, struct device *dev) /* attach firmware event handler */ brcmf_fweh_attach(drvr); - INIT_LIST_HEAD(&drvr->bus_if->dcmd_list); - return ret; fail: @@ -1115,8 +961,7 @@ int brcmf_bus_start(struct device *dev) fail: if (ret < 0) { brcmf_err("failed: %d\n", ret); - if (drvr->config) - brcmf_cfg80211_detach(drvr->config); + brcmf_cfg80211_detach(drvr->config); if (drvr->fws) { brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); @@ -1138,14 +983,21 @@ fail: return 0; } +void brcmf_bus_add_txhdrlen(struct device *dev, uint len) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_pub *drvr = bus_if->drvr; + + if (drvr) { + drvr->hdrlen += len; + } +} + static void brcmf_bus_detach(struct brcmf_pub *drvr) { brcmf_dbg(TRACE, "Enter\n"); if (drvr) { - /* Stop the protocol module */ - brcmf_proto_stop(drvr); - /* Stop the bus module */ brcmf_bus_stop(drvr->bus_if); } @@ -1184,10 +1036,11 @@ void brcmf_detach(struct device *dev) brcmf_del_if(drvr, i); } + brcmf_cfg80211_detach(drvr->config); + brcmf_bus_detach(drvr); - if (drvr->prot) - brcmf_proto_detach(drvr); + brcmf_proto_detach(drvr); brcmf_fws_deinit(drvr); @@ -1196,6 +1049,14 @@ void brcmf_detach(struct device *dev) kfree(drvr); } +s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_if *ifp = bus_if->drvr->iflist[0]; + + return brcmf_fil_iovar_data_set(ifp, name, data, len); +} + static int brcmf_get_pend_8021x_cnt(struct brcmf_if *ifp) { return atomic_read(&ifp->pend_8021x_cnt); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h deleted file mode 100644 index 53c6e710f2cb..000000000000 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCMF_PROTO_H_ -#define _BRCMF_PROTO_H_ - -/* - * Exported from the brcmf protocol module (brcmf_cdc) - */ - -/* Linkage, sets prot link and updates hdrlen in pub */ -int brcmf_proto_attach(struct brcmf_pub *drvr); - -/* Unlink, frees allocated protocol memory (including brcmf_proto) */ -void brcmf_proto_detach(struct brcmf_pub *drvr); - -/* Stop protocol: sync w/dongle state. */ -void brcmf_proto_stop(struct brcmf_pub *drvr); - -/* Add any protocol-specific data header. - * Caller must reserve prot_hdrlen prepend space. - */ -void brcmf_proto_hdrpush(struct brcmf_pub *, int ifidx, u8 offset, - struct sk_buff *txp); - -/* Sets dongle media info (drv_version, mac address). */ -int brcmf_c_preinit_dcmds(struct brcmf_if *ifp); - -#endif /* _BRCMF_PROTO_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index b02953c4ade7..9c7f08a13105 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -32,6 +32,7 @@ #include <linux/debugfs.h> #include <linux/vmalloc.h> #include <linux/platform_data/brcmfmac-sdio.h> +#include <linux/moduleparam.h> #include <asm/unaligned.h> #include <defs.h> #include <brcmu_wifi.h> @@ -110,6 +111,8 @@ struct rte_console { #define BRCMF_TXBOUND 20 /* Default for max tx frames in one scheduling */ +#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ + #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ #define MEMBLOCK 2048 /* Block size used for downloading @@ -257,9 +260,6 @@ struct rte_console { #define MAX_HDR_READ (1 << 6) #define MAX_RX_DATASZ 2048 -/* Maximum milliseconds to wait for F2 to come up */ -#define BRCMF_WAIT_F2RDY 3000 - /* Bump up limit on waiting for HT to account for first startup; * if the image is doing a CRC calculation before programming the PMU * for HT availability, it could take a couple hundred ms more, so @@ -360,6 +360,8 @@ struct brcmf_sdio_hdrinfo { u16 len_left; u16 len_nxtfrm; u8 dat_offset; + bool lastfrm; + u16 tail_pad; }; /* misc chip info needed by some of the routines */ @@ -384,7 +386,7 @@ struct brcmf_sdio { u8 tx_seq; /* Transmit sequence number (next) */ u8 tx_max; /* Maximum transmit sequence allowed */ - u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN]; + u8 *hdrbuf; /* buffer for handling rx frame */ u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */ u8 rx_seq; /* Receive sequence number (expected) */ struct brcmf_sdio_hdrinfo cur_read; @@ -455,6 +457,10 @@ struct brcmf_sdio { bool sleeping; /* SDIO bus sleeping */ u8 tx_hdrlen; /* sdio bus header length for tx packet */ + bool txglom; /* host tx glomming enable flag */ + struct sk_buff *txglom_sgpad; /* scatter-gather padding buffer */ + u16 head_align; /* buffer pointer alignment */ + u16 sgentry_align; /* scatter-gather buffer alignment */ }; /* clkstate */ @@ -479,6 +485,10 @@ static const uint max_roundup = 512; #define ALIGNMENT 4 +static int brcmf_sdio_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; +module_param_named(txglomsz, brcmf_sdio_txglomsz, int, 0); +MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]"); + enum brcmf_sdio_frmtype { BRCMF_SDIO_FT_NORMAL, BRCMF_SDIO_FT_SUPER, @@ -499,6 +509,10 @@ enum brcmf_sdio_frmtype { #define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt" #define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin" #define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt" +#define BCM43362_FIRMWARE_NAME "brcm/brcmfmac43362-sdio.bin" +#define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" +#define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" +#define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME); MODULE_FIRMWARE(BCM43143_NVRAM_NAME); @@ -514,6 +528,10 @@ MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4334_NVRAM_NAME); MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4335_NVRAM_NAME); +MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM43362_NVRAM_NAME); +MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4339_NVRAM_NAME); struct brcmf_firmware_names { u32 chipid; @@ -537,11 +555,13 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BCM4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, { BCM4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, { BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, - { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) } + { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, + { BCM43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, + { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) } }; -static const struct firmware *brcmf_sdbrcm_get_fw(struct brcmf_sdio *bus, +static const struct firmware *brcmf_sdio_get_fw(struct brcmf_sdio *bus, enum brcmf_firmware_type type) { const struct firmware *fw; @@ -606,8 +626,8 @@ r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); int ret; - *regvar = brcmf_sdio_regrl(bus->sdiodev, - bus->ci->c_inf[idx].base + offset, &ret); + *regvar = brcmf_sdiod_regrl(bus->sdiodev, + bus->ci->c_inf[idx].base + offset, &ret); return ret; } @@ -618,15 +638,15 @@ w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); int ret; - brcmf_sdio_regwl(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - regval, &ret); + brcmf_sdiod_regwl(bus->sdiodev, + bus->ci->c_inf[idx].base + reg_offset, + regval, &ret); return ret; } static int -brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) +brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) { u8 wr_val = 0, rd_val, cmp_val, bmask; int err = 0; @@ -636,8 +656,8 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - wr_val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + wr_val, &err); if (err) { brcmf_err("SDIO_AOS KSO write error: %d\n", err); return err; @@ -667,15 +687,15 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) * just one write attempt may fail, * read it back until it matches written value */ - rd_val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - &err); + rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + &err); if (((rd_val & bmask) == cmp_val) && !err) break; brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n", try_cnt, MAX_KSO_ATTEMPTS, err); udelay(KSO_WAIT_US); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - wr_val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + wr_val, &err); } while (try_cnt++ < MAX_KSO_ATTEMPTS); return err; @@ -686,7 +706,7 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) /* Turn backplane clock on or off */ -static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) +static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok) { int err; u8 clkctl, clkreq, devctl; @@ -706,16 +726,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) clkreq = bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - clkreq, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); if (err) { brcmf_err("HT Avail request error: %d\n", err); return -EBADE; } /* Check current status */ - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_err("HT Avail read error: %d\n", err); return -EBADE; @@ -724,8 +744,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) /* Go to pending and await interrupt if appropriate */ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { /* Allow only clock-available interrupt */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_err("Devctl error setting CA: %d\n", err); @@ -733,28 +753,28 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); brcmf_dbg(SDIO, "CLKCTL: set PENDING\n"); bus->clkstate = CLK_PENDING; return 0; } else if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } /* Otherwise, wait here (polling) for HT Avail */ timeout = jiffies + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, - &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); if (time_after(jiffies, timeout)) break; else @@ -787,16 +807,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } bus->clkstate = CLK_SDONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - clkreq, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); brcmf_dbg(SDIO, "CLKCTL: turned OFF\n"); if (err) { brcmf_err("Failed access turning clock off: %d\n", @@ -808,7 +828,7 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } /* Change idle/active SD state */ -static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on) +static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on) { brcmf_dbg(SDIO, "Enter\n"); @@ -821,7 +841,7 @@ static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on) } /* Transition SD and backplane clock readiness */ -static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) +static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) { #ifdef DEBUG uint oldstate = bus->clkstate; @@ -832,7 +852,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) /* Early exit if we're already there */ if (bus->clkstate == target) { if (target == CLK_AVAIL) { - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); bus->activity = true; } return 0; @@ -842,32 +862,32 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) case CLK_AVAIL: /* Make sure SD clock is available */ if (bus->clkstate == CLK_NONE) - brcmf_sdbrcm_sdclk(bus, true); + brcmf_sdio_sdclk(bus, true); /* Now request HT Avail on the backplane */ - brcmf_sdbrcm_htclk(bus, true, pendok); - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_htclk(bus, true, pendok); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); bus->activity = true; break; case CLK_SDONLY: /* Remove HT request, or bring up SD clock */ if (bus->clkstate == CLK_NONE) - brcmf_sdbrcm_sdclk(bus, true); + brcmf_sdio_sdclk(bus, true); else if (bus->clkstate == CLK_AVAIL) - brcmf_sdbrcm_htclk(bus, false, false); + brcmf_sdio_htclk(bus, false, false); else brcmf_err("request for %d -> %d\n", bus->clkstate, target); - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); break; case CLK_NONE: /* Make sure to remove HT request */ if (bus->clkstate == CLK_AVAIL) - brcmf_sdbrcm_htclk(bus, false, false); + brcmf_sdio_htclk(bus, false, false); /* Now remove the SD clock */ - brcmf_sdbrcm_sdclk(bus, false); - brcmf_sdbrcm_wd_timer(bus, 0); + brcmf_sdio_sdclk(bus, false); + brcmf_sdio_wd_timer(bus, 0); break; } #ifdef DEBUG @@ -878,7 +898,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) } static int -brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) +brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) { int err = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -901,13 +921,13 @@ brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && data_ok(bus))) return -EBUSY; - err = brcmf_sdbrcm_kso_control(bus, false); + err = brcmf_sdio_kso_control(bus, false); /* disable watchdog */ if (!err) - brcmf_sdbrcm_wd_timer(bus, 0); + brcmf_sdio_wd_timer(bus, 0); } else { bus->idlecount = 0; - err = brcmf_sdbrcm_kso_control(bus, true); + err = brcmf_sdio_kso_control(bus, true); } if (!err) { /* Change state */ @@ -925,16 +945,16 @@ end: /* control clocks */ if (sleep) { if (!bus->sr_enabled) - brcmf_sdbrcm_clkctl(bus, CLK_NONE, pendok); + brcmf_sdio_clkctl(bus, CLK_NONE, pendok); } else { - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, pendok); + brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); } return err; } -static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) +static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) { u32 intstatus = 0; u32 hmb_data; @@ -1010,7 +1030,7 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) return intstatus; } -static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) +static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) { uint retries = 0; u16 lastrbc; @@ -1022,18 +1042,18 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) rtx ? ", send NAK" : ""); if (abort) - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_RF_TERM, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_RF_TERM, &err); bus->sdcnt.f1regdata++; /* Wait until the packet has been flushed (device/FIFO stable) */ for (lastrbc = retries = 0xffff; retries > 0; retries--) { - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_RFRAMEBCHI, &err); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_RFRAMEBCLO, &err); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCHI, &err); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCLO, &err); bus->sdcnt.f1regdata += 2; if ((hi == 0) && (lo == 0)) @@ -1070,7 +1090,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) } /* return total length of buffer chain */ -static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus) +static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus) { struct sk_buff *p; uint total; @@ -1081,7 +1101,7 @@ static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus) return total; } -static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) +static void brcmf_sdio_free_glom(struct brcmf_sdio *bus) { struct sk_buff *cur, *next; @@ -1097,10 +1117,18 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) * host and WiFi dongle which contains information needed for SDIO core and * firmware * - * It consists of 2 parts: hw header and software header + * It consists of 3 parts: hardware header, hardware extension header and + * software header * hardware header (frame tag) - 4 bytes * Byte 0~1: Frame length * Byte 2~3: Checksum, bit-wise inverse of frame length + * hardware extension header - 8 bytes + * Tx glom mode only, N/A for Rx or normal Tx + * Byte 0~1: Packet length excluding hw frame tag + * Byte 2: Reserved + * Byte 3: Frame flags, bit 0: last frame indication + * Byte 4~5: Reserved + * Byte 6~7: Tail padding length * software header - 8 bytes * Byte 0: Rx/Tx sequence number * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag @@ -1111,6 +1139,7 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) * Byte 6~7: Reserved */ #define SDPCM_HWHDR_LEN 4 +#define SDPCM_HWEXT_LEN 8 #define SDPCM_SWHDR_LEN 8 #define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) /* software header */ @@ -1147,7 +1176,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, u8 rx_seq, fc, tx_seq_max; u32 swheader; - trace_brcmf_sdpcm_hdr(false, header); + trace_brcmf_sdpcm_hdr(SDPCM_RX, header); /* hw header */ len = get_unaligned_le16(header); @@ -1160,7 +1189,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, if ((u16)(~(len ^ checksum))) { brcmf_err("HW header checksum error\n"); bus->sdcnt.rx_badhdr++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); return -EIO; } if (len < SDPCM_HDRLEN) { @@ -1192,7 +1221,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, type != BRCMF_SDIO_FT_SUPER) { brcmf_err("HW header length too long\n"); bus->sdcnt.rx_toolong++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); rd->len = 0; return -EPROTO; } @@ -1211,7 +1240,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) { brcmf_err("seq %d: bad data offset\n", rx_seq); bus->sdcnt.rx_badhdr++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); rd->len = 0; return -ENXIO; } @@ -1260,25 +1289,34 @@ static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length) static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header, struct brcmf_sdio_hdrinfo *hd_info) { - u32 sw_header; + u32 hdrval; + u8 hdr_offset; brcmf_sdio_update_hwhdr(header, hd_info->len); - - sw_header = bus->tx_seq; - sw_header |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & - SDPCM_CHANNEL_MASK; - sw_header |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & - SDPCM_DOFFSET_MASK; - *(((__le32 *)header) + 1) = cpu_to_le32(sw_header); - *(((__le32 *)header) + 2) = 0; - trace_brcmf_sdpcm_hdr(true, header); + hdr_offset = SDPCM_HWHDR_LEN; + + if (bus->txglom) { + hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24); + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + hdrval = (u16)hd_info->tail_pad << 16; + *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval); + hdr_offset += SDPCM_HWEXT_LEN; + } + + hdrval = hd_info->seq_num; + hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & + SDPCM_CHANNEL_MASK; + hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & + SDPCM_DOFFSET_MASK; + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + *(((__le32 *)(header + hdr_offset)) + 1) = 0; + trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header); } -static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) +static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq) { u16 dlen, totlen; u8 *dptr, num = 0; - u32 align = 0; u16 sublen; struct sk_buff *pfirst, *pnext; @@ -1293,11 +1331,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) brcmf_dbg(SDIO, "start: glomd %p glom %p\n", bus->glomd, skb_peek(&bus->glom)); - if (bus->sdiodev->pdata) - align = bus->sdiodev->pdata->sd_sgentry_align; - if (align < 4) - align = 4; - /* If there's a descriptor, generate the packet chain */ if (bus->glomd) { pfirst = pnext = NULL; @@ -1321,9 +1354,9 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) pnext = NULL; break; } - if (sublen % align) { + if (sublen % bus->sgentry_align) { brcmf_err("sublen %d not multiple of %d\n", - sublen, align); + sublen, bus->sgentry_align); } totlen += sublen; @@ -1336,7 +1369,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* Allocate/chain packet for next subframe */ - pnext = brcmu_pkt_buf_get_skb(sublen + align); + pnext = brcmu_pkt_buf_get_skb(sublen + bus->sgentry_align); if (pnext == NULL) { brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", num, sublen); @@ -1345,7 +1378,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) skb_queue_tail(&bus->glom, pnext); /* Adhere to start alignment requirements */ - pkt_align(pnext, sublen, align); + pkt_align(pnext, sublen, bus->sgentry_align); } /* If all allocations succeeded, save packet chain @@ -1360,7 +1393,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } pfirst = pnext = NULL; } else { - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); num = 0; } @@ -1383,16 +1416,15 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } pfirst = skb_peek(&bus->glom); - dlen = (u16) brcmf_sdbrcm_glom_len(bus); + dlen = (u16) brcmf_sdio_glom_len(bus); /* Do an SDIO read for the superframe. Configurable iovar to * read directly into the chained packet, or allocate a large * packet and and copy into the chain. */ sdio_claim_host(bus->sdiodev->func[1]); - errcode = brcmf_sdcard_recv_chain(bus->sdiodev, - bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, &bus->glom, dlen); + errcode = brcmf_sdiod_recv_chain(bus->sdiodev, + &bus->glom, dlen); sdio_release_host(bus->sdiodev->func[1]); bus->sdcnt.f2rxdata++; @@ -1403,12 +1435,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) sdio_claim_host(bus->sdiodev->func[1]); if (bus->glomerr++ < 3) { - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); } else { bus->glomerr = 0; - brcmf_sdbrcm_rxfail(bus, true, false); + brcmf_sdio_rxfail(bus, true, false); bus->sdcnt.rxglomfail++; - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); } sdio_release_host(bus->sdiodev->func[1]); return 0; @@ -1456,12 +1488,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) if (bus->glomerr++ < 3) { /* Restore superframe header space */ skb_push(pfirst, sfdoff); - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); } else { bus->glomerr = 0; - brcmf_sdbrcm_rxfail(bus, true, false); + brcmf_sdio_rxfail(bus, true, false); bus->sdcnt.rxglomfail++; - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); } sdio_release_host(bus->sdiodev->func[1]); bus->cur_read.len = 0; @@ -1505,8 +1537,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) return num; } -static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, - bool *pending) +static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, + bool *pending) { DECLARE_WAITQUEUE(wait, current); int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT); @@ -1527,7 +1559,7 @@ static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, return timeout; } -static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus) +static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus) { if (waitqueue_active(&bus->dcmd_resp_wait)) wake_up_interruptible(&bus->dcmd_resp_wait); @@ -1535,7 +1567,7 @@ static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus) return 0; } static void -brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) +brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) { uint rdlen, pad; u8 *buf = NULL, *rbuf; @@ -1549,9 +1581,9 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) goto done; rbuf = bus->rxbuf; - pad = ((unsigned long)rbuf % BRCMF_SDALIGN); + pad = ((unsigned long)rbuf % bus->head_align); if (pad) - rbuf += (BRCMF_SDALIGN - pad); + rbuf += (bus->head_align - pad); /* Copy the already-read portion over */ memcpy(buf, hdr, BRCMF_FIRSTREAD); @@ -1565,19 +1597,15 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if ((pad <= bus->roundup) && (pad < bus->blocksize) && ((len + pad) < bus->sdiodev->bus_if->maxctl)) rdlen += pad; - } else if (rdlen % BRCMF_SDALIGN) { - rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN); + } else if (rdlen % bus->head_align) { + rdlen += bus->head_align - (rdlen % bus->head_align); } - /* Satisfy length-alignment requirements */ - if (rdlen & (ALIGNMENT - 1)) - rdlen = roundup(rdlen, ALIGNMENT); - /* Drop if the read is too big or it exceeds our maximum */ if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte control read exceeds %d-byte buffer\n", rdlen, bus->sdiodev->bus_if->maxctl); - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); goto done; } @@ -1585,15 +1613,12 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", len, len - doff, bus->sdiodev->bus_if->maxctl); bus->sdcnt.rx_toolong++; - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); goto done; } /* Read remain of frame body */ - sdret = brcmf_sdcard_recv_buf(bus->sdiodev, - bus->sdiodev->sbwad, - SDIO_FUNC_2, - F2SYNC, rbuf, rdlen); + sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen); bus->sdcnt.f2rxdata++; /* Control frame failures need retransmission */ @@ -1601,7 +1626,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) brcmf_err("read %d control bytes failed: %d\n", rdlen, sdret); bus->sdcnt.rxc_errors++; - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); goto done; } else memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen); @@ -1626,19 +1651,19 @@ gotpkt: done: /* Awake any waiters */ - brcmf_sdbrcm_dcmd_resp_wake(bus); + brcmf_sdio_dcmd_resp_wake(bus); } /* Pad read to blocksize for efficiency */ -static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) +static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) { if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) { *pad = bus->blocksize - (*rdlen % bus->blocksize); if (*pad <= bus->roundup && *pad < bus->blocksize && *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ) *rdlen += *pad; - } else if (*rdlen % BRCMF_SDALIGN) { - *rdlen += BRCMF_SDALIGN - (*rdlen % BRCMF_SDALIGN); + } else if (*rdlen % bus->head_align) { + *rdlen += bus->head_align - (*rdlen % bus->head_align); } } @@ -1667,7 +1692,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) u8 cnt; brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n", bus->glomd, skb_peek(&bus->glom)); - cnt = brcmf_sdbrcm_rxglom(bus, rd->seq_num); + cnt = brcmf_sdio_rxglom(bus, rd->seq_num); brcmf_dbg(GLOM, "rxglom returned %d\n", cnt); rd->seq_num += cnt - 1; rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1; @@ -1678,17 +1703,14 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) /* read header first for unknow frame length */ sdio_claim_host(bus->sdiodev->func[1]); if (!rd->len) { - ret = brcmf_sdcard_recv_buf(bus->sdiodev, - bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, - bus->rxhdr, - BRCMF_FIRSTREAD); + ret = brcmf_sdiod_recv_buf(bus->sdiodev, + bus->rxhdr, BRCMF_FIRSTREAD); bus->sdcnt.f2rxhdrs++; if (ret < 0) { brcmf_err("RXHEADER FAILED: %d\n", ret); bus->sdcnt.rx_hdrfail++; - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); sdio_release_host(bus->sdiodev->func[1]); continue; } @@ -1707,9 +1729,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) } if (rd->channel == SDPCM_CONTROL_CHANNEL) { - brcmf_sdbrcm_read_control(bus, bus->rxhdr, - rd->len, - rd->dat_offset); + brcmf_sdio_read_control(bus, bus->rxhdr, + rd->len, + rd->dat_offset); /* prepare the descriptor for the next read */ rd->len = rd->len_nxtfrm << 4; rd->len_nxtfrm = 0; @@ -1723,23 +1745,22 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) head_read = BRCMF_FIRSTREAD; } - brcmf_pad(bus, &pad, &rd->len_left); + brcmf_sdio_pad(bus, &pad, &rd->len_left); pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read + - BRCMF_SDALIGN); + bus->head_align); if (!pkt) { /* Give up on data, request rtx of events */ brcmf_err("brcmu_pkt_buf_get_skb failed\n"); - brcmf_sdbrcm_rxfail(bus, false, + brcmf_sdio_rxfail(bus, false, RETRYCHAN(rd->channel)); sdio_release_host(bus->sdiodev->func[1]); continue; } skb_pull(pkt, head_read); - pkt_align(pkt, rd->len_left, BRCMF_SDALIGN); + pkt_align(pkt, rd->len_left, bus->head_align); - ret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, pkt); + ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt); bus->sdcnt.f2rxdata++; sdio_release_host(bus->sdiodev->func[1]); @@ -1748,7 +1769,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) rd->len, rd->channel, ret); brcmu_pkt_buf_free_skb(pkt); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_rxfail(bus, true, + brcmf_sdio_rxfail(bus, true, RETRYCHAN(rd->channel)); sdio_release_host(bus->sdiodev->func[1]); continue; @@ -1773,7 +1794,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) rd->len, roundup(rd_new.len, 16) >> 4); rd->len = 0; - brcmf_sdbrcm_rxfail(bus, true, true); + brcmf_sdio_rxfail(bus, true, true); sdio_release_host(bus->sdiodev->func[1]); brcmu_pkt_buf_free_skb(pkt); continue; @@ -1795,7 +1816,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) /* Force retry w/normal header read */ rd->len = 0; sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_rxfail(bus, false, true); + brcmf_sdio_rxfail(bus, false, true); sdio_release_host(bus->sdiodev->func[1]); brcmu_pkt_buf_free_skb(pkt); continue; @@ -1820,7 +1841,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) brcmf_err("%s: glom superframe w/o " "descriptor!\n", __func__); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_rxfail(bus, false, false); + brcmf_sdio_rxfail(bus, false, false); sdio_release_host(bus->sdiodev->func[1]); } /* prepare the descriptor for the next read */ @@ -1864,13 +1885,36 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) } static void -brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) +brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus) { if (waitqueue_active(&bus->ctrl_wait)) wake_up_interruptible(&bus->ctrl_wait); return; } +static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt) +{ + u16 head_pad; + u8 *dat_buf; + + dat_buf = (u8 *)(pkt->data); + + /* Check head padding */ + head_pad = ((unsigned long)dat_buf % bus->head_align); + if (head_pad) { + if (skb_headroom(pkt) < head_pad) { + bus->sdiodev->bus_if->tx_realloc++; + head_pad = 0; + if (skb_cow(pkt, head_pad)) + return -ENOMEM; + } + skb_push(pkt, head_pad); + dat_buf = (u8 *)(pkt->data); + memset(dat_buf, 0, head_pad + bus->tx_hdrlen); + } + return head_pad; +} + /** * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage. @@ -1880,32 +1924,40 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) /* bit mask of data length chopped from the previous packet */ #define ALIGN_SKB_CHOP_LEN_MASK 0x7fff -static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, +static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, struct sk_buff_head *pktq, - struct sk_buff *pkt, uint chan) + struct sk_buff *pkt, u16 total_len) { + struct brcmf_sdio_dev *sdiodev; struct sk_buff *pkt_pad; - u16 tail_pad, tail_chop, sg_align; + u16 tail_pad, tail_chop, chain_pad; unsigned int blksize; - u8 *dat_buf; - int ntail; + bool lastfrm; + int ntail, ret; + sdiodev = bus->sdiodev; blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize; - sg_align = 4; - if (sdiodev->pdata && sdiodev->pdata->sd_sgentry_align > 4) - sg_align = sdiodev->pdata->sd_sgentry_align; /* sg entry alignment should be a divisor of block size */ - WARN_ON(blksize % sg_align); + WARN_ON(blksize % bus->sgentry_align); /* Check tail padding */ - pkt_pad = NULL; - tail_chop = pkt->len % sg_align; - tail_pad = sg_align - tail_chop; - tail_pad += blksize - (pkt->len + tail_pad) % blksize; + lastfrm = skb_queue_is_last(pktq, pkt); + tail_pad = 0; + tail_chop = pkt->len % bus->sgentry_align; + if (tail_chop) + tail_pad = bus->sgentry_align - tail_chop; + chain_pad = (total_len + tail_pad) % blksize; + if (lastfrm && chain_pad) + tail_pad += blksize - chain_pad; if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) { - pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop); + pkt_pad = bus->txglom_sgpad; + if (pkt_pad == NULL) + brcmu_pkt_buf_get_skb(tail_pad + tail_chop); if (pkt_pad == NULL) return -ENOMEM; + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad); + if (unlikely(ret < 0)) + return ret; memcpy(pkt_pad->data, pkt->data + pkt->len - tail_chop, tail_chop); @@ -1920,14 +1972,10 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, return -ENOMEM; if (skb_linearize(pkt)) return -ENOMEM; - dat_buf = (u8 *)(pkt->data); __skb_put(pkt, tail_pad); } - if (pkt_pad) - return pkt->len + tail_chop; - else - return pkt->len - tail_pad; + return tail_pad; } /** @@ -1946,58 +1994,66 @@ static int brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { - u16 head_pad, head_align; + u16 head_pad, total_len; struct sk_buff *pkt_next; - u8 *dat_buf; - int err; + u8 txseq; + int ret; struct brcmf_sdio_hdrinfo hd_info = {0}; - /* SDIO ADMA requires at least 32 bit alignment */ - head_align = 4; - if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align > 4) - head_align = bus->sdiodev->pdata->sd_head_align; + txseq = bus->tx_seq; + total_len = 0; + skb_queue_walk(pktq, pkt_next) { + /* alignment packet inserted in previous + * loop cycle can be skipped as it is + * already properly aligned and does not + * need an sdpcm header. + */ + if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG) + continue; - pkt_next = pktq->next; - dat_buf = (u8 *)(pkt_next->data); + /* align packet data pointer */ + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next); + if (ret < 0) + return ret; + head_pad = (u16)ret; + if (head_pad) + memset(pkt_next->data, 0, head_pad + bus->tx_hdrlen); - /* Check head padding */ - head_pad = ((unsigned long)dat_buf % head_align); - if (head_pad) { - if (skb_headroom(pkt_next) < head_pad) { - bus->sdiodev->bus_if->tx_realloc++; - head_pad = 0; - if (skb_cow(pkt_next, head_pad)) - return -ENOMEM; - } - skb_push(pkt_next, head_pad); - dat_buf = (u8 *)(pkt_next->data); - memset(dat_buf, 0, head_pad + bus->tx_hdrlen); - } + total_len += pkt_next->len; - if (bus->sdiodev->sg_support && pktq->qlen > 1) { - err = brcmf_sdio_txpkt_prep_sg(bus->sdiodev, pktq, - pkt_next, chan); - if (err < 0) - return err; - hd_info.len = (u16)err; - } else { hd_info.len = pkt_next->len; - } - - hd_info.channel = chan; - hd_info.dat_offset = head_pad + bus->tx_hdrlen; - - /* Now fill the header */ - brcmf_sdio_hdpack(bus, dat_buf, &hd_info); - - if (BRCMF_BYTES_ON() && - ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || - (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) - brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, "Tx Frame:\n"); - else if (BRCMF_HDRS_ON()) - brcmf_dbg_hex_dump(true, pkt_next, head_pad + bus->tx_hdrlen, - "Tx Header:\n"); + hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next); + if (bus->txglom && pktq->qlen > 1) { + ret = brcmf_sdio_txpkt_prep_sg(bus, pktq, + pkt_next, total_len); + if (ret < 0) + return ret; + hd_info.tail_pad = (u16)ret; + total_len += (u16)ret; + } + hd_info.channel = chan; + hd_info.dat_offset = head_pad + bus->tx_hdrlen; + hd_info.seq_num = txseq++; + + /* Now fill the header */ + brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info); + + if (BRCMF_BYTES_ON() && + ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || + (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) + brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, + "Tx Frame:\n"); + else if (BRCMF_HDRS_ON()) + brcmf_dbg_hex_dump(true, pkt_next, + head_pad + bus->tx_hdrlen, + "Tx Header:\n"); + } + /* Hardware length tag of the first packet should be total + * length of the chain (including padding) + */ + if (bus->txglom) + brcmf_sdio_update_hwhdr(pktq->next->data, total_len); return 0; } @@ -2015,6 +2071,7 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) { u8 *hdr; u32 dat_offset; + u16 tail_pad; u32 dummy_flags, chop_len; struct sk_buff *pkt_next, *tmp, *pkt_prev; @@ -2024,42 +2081,41 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; if (chop_len) { pkt_prev = pkt_next->prev; - memcpy(pkt_prev->data + pkt_prev->len, - pkt_next->data, chop_len); skb_put(pkt_prev, chop_len); } __skb_unlink(pkt_next, pktq); brcmu_pkt_buf_free_skb(pkt_next); } else { - hdr = pkt_next->data + SDPCM_HWHDR_LEN; + hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN; dat_offset = le32_to_cpu(*(__le32 *)hdr); dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT; skb_pull(pkt_next, dat_offset); + if (bus->txglom) { + tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2)); + skb_trim(pkt_next, pkt_next->len - tail_pad); + } } } } /* Writes a HW/SW header into the packet and sends it. */ /* Assumes: (a) header space already there, (b) caller holds lock */ -static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, - uint chan) +static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, + uint chan) { int ret; int i; - struct sk_buff_head localq; + struct sk_buff *pkt_next, *tmp; brcmf_dbg(TRACE, "Enter\n"); - __skb_queue_head_init(&localq); - __skb_queue_tail(&localq, pkt); - ret = brcmf_sdio_txpkt_prep(bus, &localq, chan); + ret = brcmf_sdio_txpkt_prep(bus, pktq, chan); if (ret) goto done; sdio_claim_host(bus->sdiodev->func[1]); - ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, &localq); + ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq); bus->sdcnt.f2txdata++; if (ret < 0) { @@ -2068,57 +2124,71 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, ret); bus->sdcnt.tx_sderrs++; - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->sdcnt.f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->sdcnt.f1regdata += 2; if ((hi == 0) && (lo == 0)) break; } - } sdio_release_host(bus->sdiodev->func[1]); - if (ret == 0) - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; done: - brcmf_sdio_txpkt_postp(bus, &localq); - __skb_dequeue_tail(&localq); - brcmf_txcomplete(bus->sdiodev->dev, pkt, ret == 0); + brcmf_sdio_txpkt_postp(bus, pktq); + if (ret == 0) + bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP; + skb_queue_walk_safe(pktq, pkt_next, tmp) { + __skb_unlink(pkt_next, pktq); + brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0); + } return ret; } -static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) +static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; + struct sk_buff_head pktq; u32 intstatus = 0; - int ret = 0, prec_out; + int ret = 0, prec_out, i; uint cnt = 0; - u8 tx_prec_map; + u8 tx_prec_map, pkt_num; brcmf_dbg(TRACE, "Enter\n"); tx_prec_map = ~bus->flowcontrol; /* Send frames until the limit or some other event */ - for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) { + for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { + pkt_num = 1; + __skb_queue_head_init(&pktq); + if (bus->txglom) + pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, + brcmf_sdio_txglomsz); + pkt_num = min_t(u32, pkt_num, + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); spin_lock_bh(&bus->txqlock); - pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out); - if (pkt == NULL) { - spin_unlock_bh(&bus->txqlock); - break; + for (i = 0; i < pkt_num; i++) { + pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, + &prec_out); + if (pkt == NULL) + break; + __skb_queue_tail(&pktq, pkt); } spin_unlock_bh(&bus->txqlock); + if (i == 0) + break; - ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL); + ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); + cnt += i; /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { @@ -2146,7 +2216,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) return cnt; } -static void brcmf_sdbrcm_bus_stop(struct device *dev) +static void brcmf_sdio_bus_stop(struct device *dev) { u32 local_hostintmask; u8 saveclk; @@ -2166,7 +2236,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) sdio_claim_host(bus->sdiodev->func[1]); /* Enable clock for device interrupts */ - brcmf_sdbrcm_bus_sleep(bus, false, false); + brcmf_sdio_bus_sleep(bus, false, false); /* Disable and clear interrupts at the chip level also */ w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); @@ -2177,26 +2247,25 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) brcmf_err("Failed to force clock for F2: err %d\n", err); /* Turn off the bus (F2), free any pending packets */ brcmf_dbg(INTR, "disable SDIO interrupts\n"); - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, - NULL); + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); /* Clear any pending interrupts now that F2 is disabled */ w_sdreg32(bus, local_hostintmask, offsetof(struct sdpcmd_regs, intstatus)); /* Turn off the backplane clock (only) */ - brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); + brcmf_sdio_clkctl(bus, CLK_SDONLY, false); sdio_release_host(bus->sdiodev->func[1]); /* Clear the data packet queues */ @@ -2205,20 +2274,20 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) /* Clear any held glomming stuff */ if (bus->glomd) brcmu_pkt_buf_free_skb(bus->glomd); - brcmf_sdbrcm_free_glom(bus); + brcmf_sdio_free_glom(bus); /* Clear rx control and wake any waiters */ spin_lock_bh(&bus->rxctl_lock); bus->rxlen = 0; spin_unlock_bh(&bus->rxctl_lock); - brcmf_sdbrcm_dcmd_resp_wake(bus); + brcmf_sdio_dcmd_resp_wake(bus); /* Reset some F2 state stuff */ bus->rxskip = false; bus->tx_seq = bus->rx_seq = 0; } -static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus) +static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) { unsigned long flags; @@ -2243,7 +2312,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) addr = bus->ci->c_inf[idx].base + offsetof(struct sdpcmd_regs, intstatus); - ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, false); + val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret); bus->sdcnt.f1regdata++; if (ret != 0) val = 0; @@ -2253,7 +2322,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) /* Clear interrupts */ if (val) { - ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, true); + brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret); bus->sdcnt.f1regdata++; } @@ -2267,7 +2336,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) return ret; } -static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) +static void brcmf_sdio_dpc(struct brcmf_sdio *bus) { u32 newstatus = 0; unsigned long intstatus; @@ -2286,8 +2355,8 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #ifdef DEBUG /* Check for inconsistent device control */ - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_err("error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; @@ -2295,8 +2364,8 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #endif /* DEBUG */ /* Read CSR, if clock on switch to AVAIL, else ignore */ - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_err("error reading CSR: %d\n", err); @@ -2307,16 +2376,16 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) devctl, clkctl); if (SBSDIO_HTAV(clkctl)) { - devctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_err("error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - devctl, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); if (err) { brcmf_err("error writing DEVCTL: %d\n", err); @@ -2327,7 +2396,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) } /* Make sure backplane clock is on */ - brcmf_sdbrcm_bus_sleep(bus, false, true); + brcmf_sdio_bus_sleep(bus, false, true); /* Pending interrupt indicates new device status */ if (atomic_read(&bus->ipend) > 0) { @@ -2358,7 +2427,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) /* Handle host mailbox indication */ if (intstatus & I_HMB_HOST_INT) { intstatus &= ~I_HMB_HOST_INT; - intstatus |= brcmf_sdbrcm_hostmail(bus); + intstatus |= brcmf_sdio_hostmail(bus); } sdio_release_host(bus->sdiodev->func[1]); @@ -2403,16 +2472,15 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) set_bit(n, (unsigned long *)&bus->intstatus.counter); } - brcmf_sdbrcm_clrintr(bus); + brcmf_sdio_clrintr(bus); if (data_ok(bus) && bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL)) { int i; sdio_claim_host(bus->sdiodev->func[1]); - err = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, bus->ctrl_frame_buf, - (u32) bus->ctrl_frame_len); + err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf, + (u32)bus->ctrl_frame_len); if (err < 0) { /* On failure, abort the command and @@ -2421,20 +2489,20 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) err); bus->sdcnt.tx_sderrs++; - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, &err); bus->sdcnt.f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, - &err); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, - &err); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, + &err); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, + &err); bus->sdcnt.f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2445,7 +2513,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) } sdio_release_host(bus->sdiodev->func[1]); bus->ctrl_frame_stat = false; - brcmf_sdbrcm_wait_event_wakeup(bus); + brcmf_sdio_wait_event_wakeup(bus); } /* Send queued frames (limit 1 if rx may still be pending) */ else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && @@ -2453,7 +2521,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) && data_ok(bus)) { framecnt = bus->rxpending ? min(txlimit, bus->txminmax) : txlimit; - framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt); + framecnt = brcmf_sdio_sendfromq(bus, framecnt); txlimit -= framecnt; } @@ -2475,12 +2543,12 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) bus->activity = false; brcmf_dbg(SDIO, "idle state\n"); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, true, false); + brcmf_sdio_bus_sleep(bus, true, false); sdio_release_host(bus->sdiodev->func[1]); } } -static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev) +static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) { struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; @@ -2489,7 +2557,7 @@ static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev) return &bus->txq; } -static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) +static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) { int ret = -EBADE; uint datalen, prec; @@ -2545,7 +2613,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) #ifdef DEBUG #define CONSOLE_LINE_MAX 192 -static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus) +static int brcmf_sdio_readconsole(struct brcmf_sdio *bus) { struct brcmf_console *c = &bus->console; u8 line[CONSOLE_LINE_MAX], ch; @@ -2558,8 +2626,8 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus) /* Read console log struct */ addr = bus->console_addr + offsetof(struct rte_console, log_le); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le, - sizeof(c->log_le)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le, + sizeof(c->log_le)); if (rv < 0) return rv; @@ -2584,7 +2652,7 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus) /* Read the console buffer */ addr = le32_to_cpu(c->log_le.buf); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize); if (rv < 0) return rv; @@ -2622,14 +2690,13 @@ break2: } #endif /* DEBUG */ -static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) +static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) { int i; int ret; bus->ctrl_frame_stat = false; - ret = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, frame, len); + ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); if (ret < 0) { /* On failure, abort the command and terminate the frame */ @@ -2637,18 +2704,18 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) ret); bus->sdcnt.tx_sderrs++; - brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); + brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->sdcnt.f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); + hi = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->sdcnt.f1regdata += 2; if (hi == 0 && lo == 0) break; @@ -2662,10 +2729,10 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) } static int -brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) +brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { u8 *frame; - u16 len; + u16 len, pad; uint retries = 0; u8 doff = 0; int ret = -1; @@ -2681,41 +2748,45 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) len = (msglen += bus->tx_hdrlen); /* Add alignment padding (optional for ctl frames) */ - doff = ((unsigned long)frame % BRCMF_SDALIGN); + doff = ((unsigned long)frame % bus->head_align); if (doff) { frame -= doff; len += doff; msglen += doff; memset(frame, 0, doff + bus->tx_hdrlen); } - /* precondition: doff < BRCMF_SDALIGN */ + /* precondition: doff < bus->head_align */ doff += bus->tx_hdrlen; /* Round send length to next SDIO block */ + pad = 0; if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { - u16 pad = bus->blocksize - (len % bus->blocksize); - if ((pad <= bus->roundup) && (pad < bus->blocksize)) - len += pad; - } else if (len % BRCMF_SDALIGN) { - len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN); + pad = bus->blocksize - (len % bus->blocksize); + if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad = 0; + } else if (len % bus->head_align) { + pad = bus->head_align - (len % bus->head_align); } - - /* Satisfy length-alignment requirements */ - if (len & (ALIGNMENT - 1)) - len = roundup(len, ALIGNMENT); + len += pad; /* precondition: IS_ALIGNED((unsigned long)frame, 2) */ /* Make sure backplane clock is on */ sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, false, false); + brcmf_sdio_bus_sleep(bus, false, false); sdio_release_host(bus->sdiodev->func[1]); hd_info.len = (u16)msglen; hd_info.channel = SDPCM_CONTROL_CHANNEL; hd_info.dat_offset = doff; + hd_info.seq_num = bus->tx_seq; + hd_info.lastfrm = true; + hd_info.tail_pad = pad; brcmf_sdio_hdpack(bus, frame, &hd_info); + if (bus->txglom) + brcmf_sdio_update_hwhdr(frame, len); + if (!data_ok(bus)) { brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", bus->tx_max, bus->tx_seq); @@ -2746,7 +2817,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) do { sdio_claim_host(bus->sdiodev->func[1]); - ret = brcmf_tx_frame(bus, frame, len); + ret = brcmf_sdio_tx_frame(bus, frame, len); sdio_release_host(bus->sdiodev->func[1]); } while (ret < 0 && retries++ < TXRETRIES); } @@ -2756,7 +2827,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) bus->activity = false; sdio_claim_host(bus->sdiodev->func[1]); brcmf_dbg(INFO, "idle\n"); - brcmf_sdbrcm_clkctl(bus, CLK_NONE, true); + brcmf_sdio_clkctl(bus, CLK_NONE, true); sdio_release_host(bus->sdiodev->func[1]); } @@ -2790,8 +2861,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, * address of sdpcm_shared structure */ sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, false, false); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); + brcmf_sdio_bus_sleep(bus, false, false); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); sdio_release_host(bus->sdiodev->func[1]); if (rv < 0) return rv; @@ -2811,8 +2882,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, } /* Read hndrte_shared structure */ - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, - sizeof(struct sdpcm_shared_le)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, + sizeof(struct sdpcm_shared_le)); if (rv < 0) return rv; @@ -2848,22 +2919,22 @@ static int brcmf_sdio_dump_console(struct brcmf_sdio *bus, /* obtain console information from device memory */ addr = sh->console_addr + offsetof(struct rte_console, log_le); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, - (u8 *)&sh_val, sizeof(u32)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); if (rv < 0) return rv; console_ptr = le32_to_cpu(sh_val); addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, - (u8 *)&sh_val, sizeof(u32)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); if (rv < 0) return rv; console_size = le32_to_cpu(sh_val); addr = sh->console_addr + offsetof(struct rte_console, log_le.idx); - rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, - (u8 *)&sh_val, sizeof(u32)); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); if (rv < 0) return rv; console_index = le32_to_cpu(sh_val); @@ -2877,8 +2948,8 @@ static int brcmf_sdio_dump_console(struct brcmf_sdio *bus, /* obtain the console data from device */ conbuf[console_size] = '\0'; - rv = brcmf_sdio_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf, - console_size); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf, + console_size); if (rv < 0) goto done; @@ -2915,8 +2986,8 @@ static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh, return 0; } - error = brcmf_sdio_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr, - sizeof(struct brcmf_trap_info)); + error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr, + sizeof(struct brcmf_trap_info)); if (error < 0) return error; @@ -2959,14 +3030,14 @@ static int brcmf_sdio_assert_info(struct brcmf_sdio *bus, sdio_claim_host(bus->sdiodev->func[1]); if (sh->assert_file_addr != 0) { - error = brcmf_sdio_ramrw(bus->sdiodev, false, - sh->assert_file_addr, (u8 *)file, 80); + error = brcmf_sdiod_ramrw(bus->sdiodev, false, + sh->assert_file_addr, (u8 *)file, 80); if (error < 0) return error; } if (sh->assert_exp_addr != 0) { - error = brcmf_sdio_ramrw(bus->sdiodev, false, - sh->assert_exp_addr, (u8 *)expr, 80); + error = brcmf_sdiod_ramrw(bus->sdiodev, false, + sh->assert_exp_addr, (u8 *)expr, 80); if (error < 0) return error; } @@ -2978,7 +3049,7 @@ static int brcmf_sdio_assert_info(struct brcmf_sdio *bus, return simple_read_from_buffer(data, count, &pos, buf, res); } -static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus) +static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) { int error; struct sdpcm_shared sh; @@ -2999,8 +3070,8 @@ static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus) return 0; } -static int brcmf_sdbrcm_died_dump(struct brcmf_sdio *bus, char __user *data, - size_t count, loff_t *ppos) +static int brcmf_sdio_died_dump(struct brcmf_sdio *bus, char __user *data, + size_t count, loff_t *ppos) { int error = 0; struct sdpcm_shared sh; @@ -3041,7 +3112,7 @@ static ssize_t brcmf_sdio_forensic_read(struct file *f, char __user *data, struct brcmf_sdio *bus = f->private_data; int res; - res = brcmf_sdbrcm_died_dump(bus, data, count, ppos); + res = brcmf_sdio_died_dump(bus, data, count, ppos); if (res > 0) *ppos += res; return (ssize_t)res; @@ -3066,7 +3137,7 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt); } #else -static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus) +static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) { return 0; } @@ -3077,7 +3148,7 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) #endif /* DEBUG */ static int -brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) +brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) { int timeleft; uint rxlen = 0; @@ -3090,7 +3161,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) brcmf_dbg(TRACE, "Enter\n"); /* Wait until control frame is available */ - timeleft = brcmf_sdbrcm_dcmd_resp_wait(bus, &bus->rxlen, &pending); + timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending); spin_lock_bh(&bus->rxctl_lock); rxlen = bus->rxlen; @@ -3107,13 +3178,13 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) rxlen, msglen); } else if (timeleft == 0) { brcmf_err("resumed on timeout\n"); - brcmf_sdbrcm_checkdied(bus); + brcmf_sdio_checkdied(bus); } else if (pending) { brcmf_dbg(CTL, "cancelled\n"); return -ERESTARTSYS; } else { brcmf_dbg(CTL, "resumed for unknown reason?\n"); - brcmf_sdbrcm_checkdied(bus); + brcmf_sdio_checkdied(bus); } if (rxlen) @@ -3124,7 +3195,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) return rxlen ? (int)rxlen : -ETIMEDOUT; } -static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) +static bool brcmf_sdio_download_state(struct brcmf_sdio *bus, bool enter) { struct chip_info *ci = bus->ci; @@ -3149,7 +3220,7 @@ static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) return true; } -static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus) +static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus) { const struct firmware *fw; int err; @@ -3157,7 +3228,7 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus) int address; int len; - fw = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_BIN); + fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN); if (fw == NULL) return -ENOENT; @@ -3171,8 +3242,8 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus) while (offset < fw->size) { len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK : fw->size - offset; - err = brcmf_sdio_ramrw(bus->sdiodev, true, address, - (u8 *)&fw->data[offset], len); + err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, + (u8 *)&fw->data[offset], len); if (err) { brcmf_err("error %d on writing %d membytes at 0x%08x\n", err, len, address); @@ -3197,8 +3268,8 @@ failure: * by two NULs. */ -static int brcmf_process_nvram_vars(struct brcmf_sdio *bus, - const struct firmware *nv) +static int brcmf_sdio_strip_nvram(struct brcmf_sdio *bus, + const struct firmware *nv) { char *varbuf; char *dp; @@ -3262,44 +3333,48 @@ err: return ret; } -static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus) +static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus) { const struct firmware *nv; int ret; - nv = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_NVRAM); + nv = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_NVRAM); if (nv == NULL) return -ENOENT; - ret = brcmf_process_nvram_vars(bus, nv); + ret = brcmf_sdio_strip_nvram(bus, nv); release_firmware(nv); return ret; } -static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) +static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) { - int bcmerror = -1; + int bcmerror = -EFAULT; + + + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); /* Keep arm in reset */ - if (!brcmf_sdbrcm_download_state(bus, true)) { + if (!brcmf_sdio_download_state(bus, true)) { brcmf_err("error placing ARM core in reset\n"); goto err; } - if (brcmf_sdbrcm_download_code_file(bus)) { + if (brcmf_sdio_download_code_file(bus)) { brcmf_err("dongle image file download failed\n"); goto err; } - if (brcmf_sdbrcm_download_nvram(bus)) { + if (brcmf_sdio_download_nvram(bus)) { brcmf_err("dongle nvram file download failed\n"); goto err; } /* Take arm out of reset */ - if (!brcmf_sdbrcm_download_state(bus, false)) { + if (!brcmf_sdio_download_state(bus, false)) { brcmf_err("error getting out of ARM core reset\n"); goto err; } @@ -3307,12 +3382,15 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) bcmerror = 0; err: + brcmf_sdio_clkctl(bus, CLK_SDONLY, false); + sdio_release_host(bus->sdiodev->func[1]); return bcmerror; } -static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus) +static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus) { - u32 addr, reg; + u32 addr, reg, pmu_cc3_mask = ~0; + int err; brcmf_dbg(TRACE, "Enter\n"); @@ -3320,49 +3398,61 @@ static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus) if (bus->ci->pmurev < 17) return false; - /* read PMU chipcontrol register 3*/ - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); - brcmf_sdio_regwl(bus->sdiodev, addr, 3, NULL); - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); - reg = brcmf_sdio_regrl(bus->sdiodev, addr, NULL); + switch (bus->ci->chip) { + case BCM43241_CHIP_ID: + case BCM4335_CHIP_ID: + case BCM4339_CHIP_ID: + /* read PMU chipcontrol register 3 */ + addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); + brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL); + addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); + reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); + return (reg & pmu_cc3_mask) != 0; + default: + addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucapabilities_ext); + reg = brcmf_sdiod_regrl(bus->sdiodev, addr, &err); + if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) + return false; - return (bool)reg; + addr = CORE_CC_REG(bus->ci->c_inf[0].base, retention_ctl); + reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); + return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | + PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; + } } -static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus) +static void brcmf_sdio_sr_init(struct brcmf_sdio *bus) { int err = 0; u8 val; brcmf_dbg(TRACE, "Enter\n"); - val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, - &err); + val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err); if (err) { brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); return; } val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, - val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err); if (err) { brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); return; } /* Add CMD14 Support */ - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, - (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | - SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), - &err); + brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, + (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | + SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), + &err); if (err) { brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); return; } - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - SBSDIO_FORCE_HT, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HT, &err); if (err) { brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); return; @@ -3374,7 +3464,7 @@ static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus) } /* enable KSO bit */ -static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) +static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) { u8 val; int err = 0; @@ -3385,8 +3475,7 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) if (bus->ci->c_inf[1].rev < 12) return 0; - val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - &err); + val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); if (err) { brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); return err; @@ -3395,8 +3484,8 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, - val, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + val, &err); if (err) { brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); return err; @@ -3407,31 +3496,70 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) } -static bool -brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) +static int brcmf_sdio_bus_preinit(struct device *dev) { - bool ret; - - sdio_claim_host(bus->sdiodev->func[1]); - - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + uint pad_size; + u32 value; + u8 idx; + int err; - ret = _brcmf_sdbrcm_download_firmware(bus) == 0; + /* the commands below use the terms tx and rx from + * a device perspective, ie. bus:txglom affects the + * bus transfers from device to host. + */ + idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); + if (bus->ci->c_inf[idx].rev < 12) { + /* for sdio core rev < 12, disable txgloming */ + value = 0; + err = brcmf_iovar_data_set(dev, "bus:txglom", &value, + sizeof(u32)); + } else { + /* otherwise, set txglomalign */ + value = 4; + if (sdiodev->pdata) + value = sdiodev->pdata->sd_sgentry_align; + /* SDIO ADMA requires at least 32 bit alignment */ + value = max_t(u32, value, 4); + err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, + sizeof(u32)); + } - brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); + if (err < 0) + goto done; - sdio_release_host(bus->sdiodev->func[1]); + bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; + if (sdiodev->sg_support) { + bus->txglom = false; + value = 1; + pad_size = bus->sdiodev->func[2]->cur_blksize << 1; + bus->txglom_sgpad = brcmu_pkt_buf_get_skb(pad_size); + if (!bus->txglom_sgpad) + brcmf_err("allocating txglom padding skb failed, reduced performance\n"); + + err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom", + &value, sizeof(u32)); + if (err < 0) { + /* bus:rxglom is allowed to fail */ + err = 0; + } else { + bus->txglom = true; + bus->tx_hdrlen += SDPCM_HWEXT_LEN; + } + } + brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen); - return ret; +done: + return err; } -static int brcmf_sdbrcm_bus_init(struct device *dev) +static int brcmf_sdio_bus_init(struct device *dev) { struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - unsigned long timeout; - u8 ready, enable; int err, ret = 0; u8 saveclk; @@ -3439,8 +3567,9 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* try to download image and nvram to the dongle */ if (bus_if->state == BRCMF_BUS_DOWN) { - if (!(brcmf_sdbrcm_download_firmware(bus))) - return -1; + err = brcmf_sdio_download_firmware(bus); + if (err) + return err; } if (!bus->sdiodev->bus_if->drvr) @@ -3448,21 +3577,21 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Start the watchdog timer */ bus->sdcnt.tickcnt = 0; - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); sdio_claim_host(bus->sdiodev->func[1]); /* Make sure backplane clock is on, needed to generate F2 interrupt */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); if (bus->clkstate != CLK_AVAIL) goto exit; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) { brcmf_err("Failed to force clock for F2: err %d\n", err); @@ -3472,56 +3601,42 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Enable function 2 (frame transfers) */ w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, offsetof(struct sdpcmd_regs, tosbmailboxdata)); - enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); + err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]); - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); - timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY); - ready = 0; - while (enable != ready) { - ready = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_IORx, NULL); - if (time_after(jiffies, timeout)) - break; - else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50)) - /* prevent busy waiting if it takes too long */ - msleep_interruptible(20); - } - - brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready); + brcmf_dbg(INFO, "enable F2: err=%d\n", err); /* If F2 successfully enabled, set core and enable interrupts */ - if (ready == enable) { + if (!err) { /* Set up the interrupt mask and enable interrupts */ bus->hostintmask = HOSTINTMASK; w_sdreg32(bus, bus->hostintmask, offsetof(struct sdpcmd_regs, hostintmask)); - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); } else { /* Disable F2 again */ - enable = SDIO_FUNC_ENABLE_1; - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); ret = -ENODEV; } - if (brcmf_sdbrcm_sr_capable(bus)) { - brcmf_sdbrcm_sr_init(bus); + if (brcmf_sdio_sr_capable(bus)) { + brcmf_sdio_sr_init(bus); } else { /* Restore previous clock setting */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - saveclk, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + saveclk, &err); } if (ret == 0) { - ret = brcmf_sdio_intr_register(bus->sdiodev); + ret = brcmf_sdiod_intr_register(bus->sdiodev); if (ret != 0) brcmf_err("intr register failed:%d\n", ret); } /* If we didn't come up, turn off backplane clock */ - if (bus_if->state != BRCMF_BUS_DATA) - brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); + if (ret != 0) + brcmf_sdio_clkctl(bus, CLK_NONE, false); exit: sdio_release_host(bus->sdiodev->func[1]); @@ -3529,10 +3644,8 @@ exit: return ret; } -void brcmf_sdbrcm_isr(void *arg) +void brcmf_sdio_isr(struct brcmf_sdio *bus) { - struct brcmf_sdio *bus = (struct brcmf_sdio *) arg; - brcmf_dbg(TRACE, "Enter\n"); if (!bus) { @@ -3562,7 +3675,7 @@ void brcmf_sdbrcm_isr(void *arg) queue_work(bus->brcmf_wq, &bus->datawork); } -static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) +static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) { #ifdef DEBUG struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev); @@ -3586,9 +3699,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) u8 devpend; sdio_claim_host(bus->sdiodev->func[1]); - devpend = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_INTx, - NULL); + devpend = brcmf_sdiod_regrb(bus->sdiodev, + SDIO_CCCR_INTx, + NULL); sdio_release_host(bus->sdiodev->func[1]); intstatus = devpend & (INTR_STATUS_FUNC1 | @@ -3618,8 +3731,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->console.count -= bus->console_interval; sdio_claim_host(bus->sdiodev->func[1]); /* Make sure backplane clock is on */ - brcmf_sdbrcm_bus_sleep(bus, false, false); - if (brcmf_sdbrcm_readconsole(bus) < 0) + brcmf_sdio_bus_sleep(bus, false, false); + if (brcmf_sdio_readconsole(bus) < 0) /* stop on error */ bus->console_interval = 0; sdio_release_host(bus->sdiodev->func[1]); @@ -3633,11 +3746,11 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->idlecount = 0; if (bus->activity) { bus->activity = false; - brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); + brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); } else { brcmf_dbg(SDIO, "idle\n"); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_bus_sleep(bus, true, false); + brcmf_sdio_bus_sleep(bus, true, false); sdio_release_host(bus->sdiodev->func[1]); } } @@ -3652,38 +3765,13 @@ static void brcmf_sdio_dataworker(struct work_struct *work) datawork); while (atomic_read(&bus->dpc_tskcnt)) { - brcmf_sdbrcm_dpc(bus); + brcmf_sdio_dpc(bus); atomic_dec(&bus->dpc_tskcnt); } } -static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - kfree(bus->rxbuf); - bus->rxctl = bus->rxbuf = NULL; - bus->rxlen = 0; -} - -static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - if (bus->sdiodev->bus_if->maxctl) { - bus->rxblen = - roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN), - ALIGNMENT) + BRCMF_SDALIGN; - bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC); - if (!(bus->rxbuf)) - return false; - } - - return true; -} - static bool -brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) +brcmf_sdio_probe_attach(struct brcmf_sdio *bus) { u8 clkctl = 0; int err = 0; @@ -3696,18 +3784,18 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) sdio_claim_host(bus->sdiodev->func[1]); pr_debug("F1 signature read @0x18000000=0x%4x\n", - brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); + brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); /* * Force PLL off until brcmf_sdio_chip_attach() * programs PLL control regs */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - BRCMF_INIT_CLKCTL1, &err); + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + BRCMF_INIT_CLKCTL1, &err); if (!err) - clkctl = brcmf_sdio_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", @@ -3715,12 +3803,12 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) goto fail; } - if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) { + if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) { brcmf_err("brcmf_sdio_chip_attach failed!\n"); goto fail; } - if (brcmf_sdbrcm_kso_init(bus)) { + if (brcmf_sdio_kso_init(bus)) { brcmf_err("error enabling KSO\n"); goto fail; } @@ -3739,33 +3827,33 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) } /* Set card control so an SDIO card reset does a WLAN backplane reset */ - reg_val = brcmf_sdio_regrb(bus->sdiodev, - SDIO_CCCR_BRCM_CARDCTRL, &err); + reg_val = brcmf_sdiod_regrb(bus->sdiodev, + SDIO_CCCR_BRCM_CARDCTRL, &err); if (err) goto fail; reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; - brcmf_sdio_regwb(bus->sdiodev, - SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); + brcmf_sdiod_regwb(bus->sdiodev, + SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); if (err) goto fail; /* set PMUControl so a backplane reset does PMU state reload */ reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucontrol); - reg_val = brcmf_sdio_regrl(bus->sdiodev, - reg_addr, - &err); + reg_val = brcmf_sdiod_regrl(bus->sdiodev, + reg_addr, + &err); if (err) goto fail; reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); - brcmf_sdio_regwl(bus->sdiodev, - reg_addr, - reg_val, - &err); + brcmf_sdiod_regwl(bus->sdiodev, + reg_addr, + reg_val, + &err); if (err) goto fail; @@ -3774,9 +3862,13 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); + /* allocate header buffer */ + bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL); + if (!bus->hdrbuf) + return false; /* Locate an appropriately-aligned portion of hdrbuf */ bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0], - BRCMF_SDALIGN); + bus->head_align); /* Set the poll and/or interrupt flags */ bus->intr = true; @@ -3791,42 +3883,8 @@ fail: return false; } -static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - sdio_claim_host(bus->sdiodev->func[1]); - - /* Disable F2 to clear any intermediate frame state on the dongle */ - brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); - - bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - bus->rxflow = false; - - /* Done with backplane-dependent accesses, can drop clock... */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); - - sdio_release_host(bus->sdiodev->func[1]); - - /* ...and initialize clock/power states */ - bus->clkstate = CLK_SDONLY; - bus->idletime = BRCMF_IDLE_INTERVAL; - bus->idleclock = BRCMF_IDLE_ACTIVE; - - /* Query the F2 block size, set roundup accordingly */ - bus->blocksize = bus->sdiodev->func[2]->cur_blksize; - bus->roundup = min(max_roundup, bus->blocksize); - - /* SR state */ - bus->sleeping = false; - bus->sr_enabled = false; - - return true; -} - static int -brcmf_sdbrcm_watchdog_thread(void *data) +brcmf_sdio_watchdog_thread(void *data) { struct brcmf_sdio *bus = (struct brcmf_sdio *)data; @@ -3836,7 +3894,7 @@ brcmf_sdbrcm_watchdog_thread(void *data) if (kthread_should_stop()) break; if (!wait_for_completion_interruptible(&bus->watchdog_wait)) { - brcmf_sdbrcm_bus_watchdog(bus); + brcmf_sdio_bus_watchdog(bus); /* Count the tick for reference */ bus->sdcnt.tickcnt++; } else @@ -3846,7 +3904,7 @@ brcmf_sdbrcm_watchdog_thread(void *data) } static void -brcmf_sdbrcm_watchdog(unsigned long data) +brcmf_sdio_watchdog(unsigned long data) { struct brcmf_sdio *bus = (struct brcmf_sdio *)data; @@ -3859,73 +3917,23 @@ brcmf_sdbrcm_watchdog(unsigned long data) } } -static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - if (bus->ci) { - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); - brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); - sdio_release_host(bus->sdiodev->func[1]); - brcmf_sdio_chip_detach(&bus->ci); - if (bus->vars && bus->varsz) - kfree(bus->vars); - bus->vars = NULL; - } - - brcmf_dbg(TRACE, "Disconnected\n"); -} - -/* Detach and free everything */ -static void brcmf_sdbrcm_release(struct brcmf_sdio *bus) -{ - brcmf_dbg(TRACE, "Enter\n"); - - if (bus) { - /* De-register interrupt handler */ - brcmf_sdio_intr_unregister(bus->sdiodev); - - cancel_work_sync(&bus->datawork); - if (bus->brcmf_wq) - destroy_workqueue(bus->brcmf_wq); - - if (bus->sdiodev->bus_if->drvr) { - brcmf_detach(bus->sdiodev->dev); - brcmf_sdbrcm_release_dongle(bus); - } - - brcmf_sdbrcm_release_malloc(bus); - - kfree(bus); - } - - brcmf_dbg(TRACE, "Disconnected\n"); -} - static struct brcmf_bus_ops brcmf_sdio_bus_ops = { - .stop = brcmf_sdbrcm_bus_stop, - .init = brcmf_sdbrcm_bus_init, - .txdata = brcmf_sdbrcm_bus_txdata, - .txctl = brcmf_sdbrcm_bus_txctl, - .rxctl = brcmf_sdbrcm_bus_rxctl, - .gettxq = brcmf_sdbrcm_bus_gettxq, + .stop = brcmf_sdio_bus_stop, + .preinit = brcmf_sdio_bus_preinit, + .init = brcmf_sdio_bus_init, + .txdata = brcmf_sdio_bus_txdata, + .txctl = brcmf_sdio_bus_txctl, + .rxctl = brcmf_sdio_bus_rxctl, + .gettxq = brcmf_sdio_bus_gettxq, }; -void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) +struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) { int ret; struct brcmf_sdio *bus; - struct brcmf_bus_dcmd *dlst; - u32 dngl_txglom; - u32 txglomalign = 0; - u8 idx; brcmf_dbg(TRACE, "Enter\n"); - /* We make an assumption about address window mappings: - * regsva == SI_ENUM_BASE*/ - /* Allocate private bus interface state */ bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC); if (!bus) @@ -3939,6 +3947,18 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->txminmax = BRCMF_TXMINMAX; bus->tx_seq = SDPCM_SEQ_WRAP - 1; + /* platform specific configuration: + * alignments must be at least 4 bytes for ADMA + */ + bus->head_align = ALIGNMENT; + bus->sgentry_align = ALIGNMENT; + if (sdiodev->pdata) { + if (sdiodev->pdata->sd_head_align > ALIGNMENT) + bus->head_align = sdiodev->pdata->sd_head_align; + if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) + bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; + } + INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq"); if (bus->brcmf_wq == NULL) { @@ -3947,8 +3967,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* attempt to attach to the dongle */ - if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) { - brcmf_err("brcmf_sdbrcm_probe_attach failed\n"); + if (!(brcmf_sdio_probe_attach(bus))) { + brcmf_err("brcmf_sdio_probe_attach failed\n"); goto fail; } @@ -3960,11 +3980,11 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) /* Set up the watchdog timer */ init_timer(&bus->timer); bus->timer.data = (unsigned long)bus; - bus->timer.function = brcmf_sdbrcm_watchdog; + bus->timer.function = brcmf_sdio_watchdog; /* Initialize watchdog thread */ init_completion(&bus->watchdog_wait); - bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread, + bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread, bus, "brcmf_watchdog"); if (IS_ERR(bus->watchdog_tsk)) { pr_warn("brcmf_watchdog thread failed to start\n"); @@ -3983,50 +4003,53 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; /* Attach to the common layer, reserve hdr space */ - ret = brcmf_attach(bus->tx_hdrlen, bus->sdiodev->dev); + ret = brcmf_attach(bus->sdiodev->dev); if (ret != 0) { brcmf_err("brcmf_attach failed\n"); goto fail; } /* Allocate buffers */ - if (!(brcmf_sdbrcm_probe_malloc(bus))) { - brcmf_err("brcmf_sdbrcm_probe_malloc failed\n"); - goto fail; + if (bus->sdiodev->bus_if->maxctl) { + bus->rxblen = + roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN), + ALIGNMENT) + bus->head_align; + bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC); + if (!(bus->rxbuf)) { + brcmf_err("rxbuf allocation failed\n"); + goto fail; + } } - if (!(brcmf_sdbrcm_probe_init(bus))) { - brcmf_err("brcmf_sdbrcm_probe_init failed\n"); - goto fail; - } + sdio_claim_host(bus->sdiodev->func[1]); + + /* Disable F2 to clear any intermediate frame state on the dongle */ + sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]); + + bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; + bus->rxflow = false; + + /* Done with backplane-dependent accesses, can drop clock... */ + brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + + sdio_release_host(bus->sdiodev->func[1]); + + /* ...and initialize clock/power states */ + bus->clkstate = CLK_SDONLY; + bus->idletime = BRCMF_IDLE_INTERVAL; + bus->idleclock = BRCMF_IDLE_ACTIVE; + + /* Query the F2 block size, set roundup accordingly */ + bus->blocksize = bus->sdiodev->func[2]->cur_blksize; + bus->roundup = min(max_roundup, bus->blocksize); + + /* SR state */ + bus->sleeping = false; + bus->sr_enabled = false; brcmf_sdio_debugfs_create(bus); brcmf_dbg(INFO, "completed!!\n"); - /* sdio bus core specific dcmd */ - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL); - if (dlst) { - if (bus->ci->c_inf[idx].rev < 12) { - /* for sdio core rev < 12, disable txgloming */ - dngl_txglom = 0; - dlst->name = "bus:txglom"; - dlst->param = (char *)&dngl_txglom; - dlst->param_len = sizeof(u32); - } else { - /* otherwise, set txglomalign */ - if (sdiodev->pdata) - txglomalign = sdiodev->pdata->sd_sgentry_align; - /* SDIO ADMA requires at least 32 bit alignment */ - if (txglomalign < 4) - txglomalign = 4; - dlst->name = "bus:txglomalign"; - dlst->param = (char *)&txglomalign; - dlst->param_len = sizeof(u32); - } - list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list); - } - /* if firmware path present try to download and bring up bus */ ret = brcmf_bus_start(bus->sdiodev->dev); if (ret != 0) { @@ -4037,24 +4060,46 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) return bus; fail: - brcmf_sdbrcm_release(bus); + brcmf_sdio_remove(bus); return NULL; } -void brcmf_sdbrcm_disconnect(void *ptr) +/* Detach and free everything */ +void brcmf_sdio_remove(struct brcmf_sdio *bus) { - struct brcmf_sdio *bus = (struct brcmf_sdio *)ptr; - brcmf_dbg(TRACE, "Enter\n"); - if (bus) - brcmf_sdbrcm_release(bus); + if (bus) { + /* De-register interrupt handler */ + brcmf_sdiod_intr_unregister(bus->sdiodev); + + cancel_work_sync(&bus->datawork); + if (bus->brcmf_wq) + destroy_workqueue(bus->brcmf_wq); + + if (bus->sdiodev->bus_if->drvr) { + brcmf_detach(bus->sdiodev->dev); + } + + if (bus->ci) { + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + brcmf_sdio_clkctl(bus, CLK_NONE, false); + sdio_release_host(bus->sdiodev->func[1]); + brcmf_sdio_chip_detach(&bus->ci); + } + + brcmu_pkt_buf_free_skb(bus->txglom_sgpad); + kfree(bus->rxbuf); + kfree(bus->hdrbuf); + kfree(bus->vars); + kfree(bus); + } brcmf_dbg(TRACE, "Disconnected\n"); } -void -brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick) +void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick) { /* Totally stop the timer */ if (!wdtick && bus->wd_timer_valid) { @@ -4065,7 +4110,7 @@ brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick) } /* don't start the wd until fw is loaded */ - if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) + if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA) return; if (wdtick) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h index 14bc24dc5bae..51b53a73d074 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h @@ -122,6 +122,52 @@ enum brcmf_fweh_event_code { #define BRCMF_EVENT_MSG_FLUSHTXQ 0x02 #define BRCMF_EVENT_MSG_GROUP 0x04 +/* status field values in struct brcmf_event_msg */ +#define BRCMF_E_STATUS_SUCCESS 0 +#define BRCMF_E_STATUS_FAIL 1 +#define BRCMF_E_STATUS_TIMEOUT 2 +#define BRCMF_E_STATUS_NO_NETWORKS 3 +#define BRCMF_E_STATUS_ABORT 4 +#define BRCMF_E_STATUS_NO_ACK 5 +#define BRCMF_E_STATUS_UNSOLICITED 6 +#define BRCMF_E_STATUS_ATTEMPT 7 +#define BRCMF_E_STATUS_PARTIAL 8 +#define BRCMF_E_STATUS_NEWSCAN 9 +#define BRCMF_E_STATUS_NEWASSOC 10 +#define BRCMF_E_STATUS_11HQUIET 11 +#define BRCMF_E_STATUS_SUPPRESS 12 +#define BRCMF_E_STATUS_NOCHANS 13 +#define BRCMF_E_STATUS_CS_ABORT 15 +#define BRCMF_E_STATUS_ERROR 16 + +/* reason field values in struct brcmf_event_msg */ +#define BRCMF_E_REASON_INITIAL_ASSOC 0 +#define BRCMF_E_REASON_LOW_RSSI 1 +#define BRCMF_E_REASON_DEAUTH 2 +#define BRCMF_E_REASON_DISASSOC 3 +#define BRCMF_E_REASON_BCNS_LOST 4 +#define BRCMF_E_REASON_MINTXRATE 9 +#define BRCMF_E_REASON_TXFAIL 10 + +#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 +#define BRCMF_E_REASON_FAST_ROAM_FAILED 5 +#define BRCMF_E_REASON_DIRECTED_ROAM 6 +#define BRCMF_E_REASON_TSPEC_REJECTED 7 +#define BRCMF_E_REASON_BETTER_AP 8 + +/* action field values for brcmf_ifevent */ +#define BRCMF_E_IF_ADD 1 +#define BRCMF_E_IF_DEL 2 +#define BRCMF_E_IF_CHANGE 3 + +/* flag field values for brcmf_ifevent */ +#define BRCMF_E_IF_FLAG_NOIF 1 + +/* role field values for brcmf_ifevent */ +#define BRCMF_E_IF_ROLE_STA 0 +#define BRCMF_E_IF_ROLE_AP 1 +#define BRCMF_E_IF_ROLE_WDS 2 + /** * definitions for event packet validation. */ @@ -160,6 +206,14 @@ struct brcmf_event_msg { u8 bsscfgidx; }; +struct brcmf_if_event { + u8 ifidx; + u8 action; + u8 flags; + u8 bssidx; + u8 role; +}; + typedef int (*brcmf_fweh_handler_t)(struct brcmf_if *ifp, const struct brcmf_event_msg *evtmsg, void *data); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c index 04f395930d86..22adbe311d20 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c @@ -27,6 +27,7 @@ #include "dhd_dbg.h" #include "tracepoint.h" #include "fwil.h" +#include "proto.h" #define MAX_HEX_DUMP_LEN 64 @@ -46,11 +47,9 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp, u32 cmd, void *data, u32 len, bool set) if (data != NULL) len = min_t(uint, len, BRCMF_DCMD_MAXLEN); if (set) - err = brcmf_proto_cdc_set_dcmd(drvr, ifp->ifidx, cmd, data, - len); + err = brcmf_proto_set_dcmd(drvr, ifp->ifidx, cmd, data, len); else - err = brcmf_proto_cdc_query_dcmd(drvr, ifp->ifidx, cmd, data, - len); + err = brcmf_proto_query_dcmd(drvr, ifp->ifidx, cmd, data, len); if (err >= 0) err = 0; @@ -69,7 +68,7 @@ brcmf_fil_cmd_data_set(struct brcmf_if *ifp, u32 cmd, void *data, u32 len) brcmf_dbg(FIL, "cmd=%d, len=%d\n", cmd, len); brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data"); + min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); err = brcmf_fil_cmd_data(ifp, cmd, data, len, true); mutex_unlock(&ifp->drvr->proto_block); @@ -87,7 +86,7 @@ brcmf_fil_cmd_data_get(struct brcmf_if *ifp, u32 cmd, void *data, u32 len) brcmf_dbg(FIL, "cmd=%d, len=%d\n", cmd, len); brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data"); + min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); mutex_unlock(&ifp->drvr->proto_block); @@ -156,7 +155,7 @@ brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, void *data, brcmf_dbg(FIL, "name=%s, len=%d\n", name, len); brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data"); + min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); buflen = brcmf_create_iovar(name, data, len, drvr->proto_buf, sizeof(drvr->proto_buf)); @@ -196,7 +195,7 @@ brcmf_fil_iovar_data_get(struct brcmf_if *ifp, char *name, void *data, brcmf_dbg(FIL, "name=%s, len=%d\n", name, len); brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data"); + min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); mutex_unlock(&drvr->proto_block); return err; @@ -279,7 +278,7 @@ brcmf_fil_bsscfg_data_set(struct brcmf_if *ifp, char *name, brcmf_dbg(FIL, "bssidx=%d, name=%s, len=%d\n", ifp->bssidx, name, len); brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data"); + min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); buflen = brcmf_create_bsscfg(ifp->bssidx, name, data, len, drvr->proto_buf, sizeof(drvr->proto_buf)); @@ -318,7 +317,7 @@ brcmf_fil_bsscfg_data_get(struct brcmf_if *ifp, char *name, } brcmf_dbg(FIL, "bssidx=%d, name=%s, len=%d\n", ifp->bssidx, name, len); brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data"); + min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); mutex_unlock(&drvr->proto_block); return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h index 16eb8202fb1e..77eae86e55c2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h @@ -17,6 +17,67 @@ #ifndef _fwil_h_ #define _fwil_h_ +/******************************************************************************* + * Dongle command codes that are interpreted by firmware + ******************************************************************************/ +#define BRCMF_C_GET_VERSION 1 +#define BRCMF_C_UP 2 +#define BRCMF_C_DOWN 3 +#define BRCMF_C_SET_PROMISC 10 +#define BRCMF_C_GET_RATE 12 +#define BRCMF_C_GET_INFRA 19 +#define BRCMF_C_SET_INFRA 20 +#define BRCMF_C_GET_AUTH 21 +#define BRCMF_C_SET_AUTH 22 +#define BRCMF_C_GET_BSSID 23 +#define BRCMF_C_GET_SSID 25 +#define BRCMF_C_SET_SSID 26 +#define BRCMF_C_TERMINATED 28 +#define BRCMF_C_GET_CHANNEL 29 +#define BRCMF_C_SET_CHANNEL 30 +#define BRCMF_C_GET_SRL 31 +#define BRCMF_C_SET_SRL 32 +#define BRCMF_C_GET_LRL 33 +#define BRCMF_C_SET_LRL 34 +#define BRCMF_C_GET_RADIO 37 +#define BRCMF_C_SET_RADIO 38 +#define BRCMF_C_GET_PHYTYPE 39 +#define BRCMF_C_SET_KEY 45 +#define BRCMF_C_SET_PASSIVE_SCAN 49 +#define BRCMF_C_SCAN 50 +#define BRCMF_C_SCAN_RESULTS 51 +#define BRCMF_C_DISASSOC 52 +#define BRCMF_C_REASSOC 53 +#define BRCMF_C_SET_ROAM_TRIGGER 55 +#define BRCMF_C_SET_ROAM_DELTA 57 +#define BRCMF_C_GET_BCNPRD 75 +#define BRCMF_C_SET_BCNPRD 76 +#define BRCMF_C_GET_DTIMPRD 77 +#define BRCMF_C_SET_DTIMPRD 78 +#define BRCMF_C_SET_COUNTRY 84 +#define BRCMF_C_GET_PM 85 +#define BRCMF_C_SET_PM 86 +#define BRCMF_C_GET_CURR_RATESET 114 +#define BRCMF_C_GET_AP 117 +#define BRCMF_C_SET_AP 118 +#define BRCMF_C_GET_RSSI 127 +#define BRCMF_C_GET_WSEC 133 +#define BRCMF_C_SET_WSEC 134 +#define BRCMF_C_GET_PHY_NOISE 135 +#define BRCMF_C_GET_BSS_INFO 136 +#define BRCMF_C_GET_BANDLIST 140 +#define BRCMF_C_SET_SCB_TIMEOUT 158 +#define BRCMF_C_GET_PHYLIST 180 +#define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 +#define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 +#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201 +#define BRCMF_C_GET_VALID_CHANNELS 217 +#define BRCMF_C_GET_KEY_PRIMARY 235 +#define BRCMF_C_SET_KEY_PRIMARY 236 +#define BRCMF_C_SET_SCAN_PASSIVE_TIME 258 +#define BRCMF_C_GET_VAR 262 +#define BRCMF_C_SET_VAR 263 + s32 brcmf_fil_cmd_data_set(struct brcmf_if *ifp, u32 cmd, void *data, u32 len); s32 brcmf_fil_cmd_data_get(struct brcmf_if *ifp, u32 cmd, void *data, u32 len); s32 brcmf_fil_cmd_int_set(struct brcmf_if *ifp, u32 cmd, u32 data); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index ecabb04f33c3..af17a5bc8b83 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -29,6 +29,24 @@ #define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 #define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 +#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ +#define BRCMF_BSS_RSSI_ON_CHANNEL 0x0002 + +#define BRCMF_STA_ASSOC 0x10 /* Associated */ + +/* size of brcmf_scan_params not including variable length array */ +#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 + +/* masks for channel and ssid count */ +#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff +#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 + +/* primary (ie tx) key */ +#define BRCMF_PRIMARY_KEY (1 << 1) +#define DOT11_BSSTYPE_ANY 2 +#define BRCMF_ESCAN_REQ_VERSION 1 + +#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, @@ -90,4 +108,290 @@ enum brcmf_tdls_manual_ep_ops { BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6 }; +/* Pattern matching filter. Specifies an offset within received packets to + * start matching, the pattern to match, the size of the pattern, and a bitmask + * that indicates which bits within the pattern should be matched. + */ +struct brcmf_pkt_filter_pattern_le { + /* + * Offset within received packet to start pattern matching. + * Offset '0' is the first byte of the ethernet header. + */ + __le32 offset; + /* Size of the pattern. Bitmask must be the same size.*/ + __le32 size_bytes; + /* + * Variable length mask and pattern data. mask starts at offset 0. + * Pattern immediately follows mask. + */ + u8 mask_and_pattern[1]; +}; + +/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ +struct brcmf_pkt_filter_le { + __le32 id; /* Unique filter id, specified by app. */ + __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ + __le32 negate_match; /* Negate the result of filter matches */ + union { /* Filter definitions */ + struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */ + } u; +}; + +/* IOVAR "pkt_filter_enable" parameter. */ +struct brcmf_pkt_filter_enable_le { + __le32 id; /* Unique filter id */ + __le32 enable; /* Enable/disable bool */ +}; + +/* BSS info structure + * Applications MUST CHECK ie_offset field and length field to access IEs and + * next bss_info structure in a vector (in struct brcmf_scan_results) + */ +struct brcmf_bss_info_le { + __le32 version; /* version field */ + __le32 length; /* byte length of data in this record, + * starting at version and including IEs + */ + u8 BSSID[ETH_ALEN]; + __le16 beacon_period; /* units are Kusec */ + __le16 capability; /* Capability information */ + u8 SSID_len; + u8 SSID[32]; + struct { + __le32 count; /* # rates in this set */ + u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + __le16 chanspec; /* chanspec for bss */ + __le16 atim_window; /* units are Kusec */ + u8 dtim_period; /* DTIM period */ + __le16 RSSI; /* receive signal strength (in dBm) */ + s8 phy_noise; /* noise (in dBm) */ + + u8 n_cap; /* BSS is 802.11N Capable */ + /* 802.11N BSS Capabilities (based on HT_CAP_*): */ + __le32 nbss_cap; + u8 ctl_ch; /* 802.11N BSS control channel number */ + __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ + u8 flags; /* flags */ + u8 reserved[3]; /* Reserved for expansion of BSS properties */ + u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ + + __le16 ie_offset; /* offset at which IEs start, from beginning */ + __le32 ie_length; /* byte length of Information Elements */ + __le16 SNR; /* average SNR of during frame reception */ + /* Add new fields here */ + /* variable length Information Elements */ +}; + +struct brcm_rateset_le { + /* # rates in this set */ + __le32 count; + /* rates in 500kbps units w/hi bit set if basic */ + u8 rates[BRCMF_MAXRATES_IN_SET]; +}; + +struct brcmf_ssid { + u32 SSID_len; + unsigned char SSID[32]; +}; + +struct brcmf_ssid_le { + __le32 SSID_len; + unsigned char SSID[32]; +}; + +struct brcmf_scan_params_le { + struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ + u8 bssid[ETH_ALEN]; /* default: bcast */ + s8 bss_type; /* default: any, + * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT + */ + u8 scan_type; /* flags, 0 use default */ + __le32 nprobes; /* -1 use default, number of probes per channel */ + __le32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + __le32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + __le32 home_time; /* -1 use default, dwell time for the + * home channel between channel scans + */ + __le32 channel_num; /* count of channels and ssids that follow + * + * low half is count of channels in + * channel_list, 0 means default (use all + * available channels) + * + * high half is entries in struct brcmf_ssid + * array that follows channel_list, aligned for + * s32 (4 bytes) meaning an odd channel count + * implies a 2-byte pad between end of + * channel_list and first ssid + * + * if ssid count is zero, single ssid in the + * fixed parameter portion is assumed, otherwise + * ssid in the fixed portion is ignored + */ + __le16 channel_list[1]; /* list of chanspecs */ +}; + +struct brcmf_scan_results { + u32 buflen; + u32 version; + u32 count; + struct brcmf_bss_info_le bss_info_le[]; +}; + +struct brcmf_escan_params_le { + __le32 version; + __le16 action; + __le16 sync_id; + struct brcmf_scan_params_le params_le; +}; + +struct brcmf_escan_result_le { + __le32 buflen; + __le32 version; + __le16 sync_id; + __le16 bss_count; + struct brcmf_bss_info_le bss_info_le; +}; + +#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ + sizeof(struct brcmf_bss_info_le)) + +/* used for association with a specific BSSID and chanspec list */ +struct brcmf_assoc_params_le { + /* 00:00:00:00:00:00: broadcast scan */ + u8 bssid[ETH_ALEN]; + /* 0: all available channels, otherwise count of chanspecs in + * chanspec_list */ + __le32 chanspec_num; + /* list of chanspecs */ + __le16 chanspec_list[1]; +}; + +/* used for join with or without a specific bssid and channel list */ +struct brcmf_join_params { + struct brcmf_ssid_le ssid_le; + struct brcmf_assoc_params_le params_le; +}; + +/* scan params for extended join */ +struct brcmf_join_scan_params_le { + u8 scan_type; /* 0 use default, active or passive scan */ + __le32 nprobes; /* -1 use default, nr of probes per channel */ + __le32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + __le32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + __le32 home_time; /* -1 use default, dwell time for the home + * channel between channel scans + */ +}; + +/* extended join params */ +struct brcmf_ext_join_params_le { + struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ + struct brcmf_join_scan_params_le scan_le; + struct brcmf_assoc_params_le assoc_le; +}; + +struct brcmf_wsec_key { + u32 index; /* key index */ + u32 len; /* key length */ + u8 data[WLAN_MAX_KEY_LEN]; /* key data */ + u32 pad_1[18]; + u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + u32 flags; /* misc flags */ + u32 pad_2[3]; + u32 iv_initialized; /* has IV been initialized already? */ + u32 pad_3; + /* Rx IV */ + struct { + u32 hi; /* upper 32 bits of IV */ + u16 lo; /* lower 16 bits of IV */ + } rxiv; + u32 pad_4[2]; + u8 ea[ETH_ALEN]; /* per station */ +}; + +/* + * dongle requires same struct as above but with fields in little endian order + */ +struct brcmf_wsec_key_le { + __le32 index; /* key index */ + __le32 len; /* key length */ + u8 data[WLAN_MAX_KEY_LEN]; /* key data */ + __le32 pad_1[18]; + __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + __le32 flags; /* misc flags */ + __le32 pad_2[3]; + __le32 iv_initialized; /* has IV been initialized already? */ + __le32 pad_3; + /* Rx IV */ + struct { + __le32 hi; /* upper 32 bits of IV */ + __le16 lo; /* lower 16 bits of IV */ + } rxiv; + __le32 pad_4[2]; + u8 ea[ETH_ALEN]; /* per station */ +}; + +/* Used to get specific STA parameters */ +struct brcmf_scb_val_le { + __le32 val; + u8 ea[ETH_ALEN]; +}; + +/* channel encoding */ +struct brcmf_channel_info_le { + __le32 hw_channel; + __le32 target_channel; + __le32 scan_channel; +}; + +struct brcmf_sta_info_le { + __le16 ver; /* version of this struct */ + __le16 len; /* length in bytes of this structure */ + __le16 cap; /* sta's advertised capabilities */ + __le32 flags; /* flags defined below */ + __le32 idle; /* time since data pkt rx'd from sta */ + u8 ea[ETH_ALEN]; /* Station address */ + __le32 count; /* # rates in this set */ + u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ + /* w/hi bit set if basic */ + __le32 in; /* seconds elapsed since associated */ + __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ + __le32 tx_pkts; /* # of packets transmitted */ + __le32 tx_failures; /* # of packets failed */ + __le32 rx_ucast_pkts; /* # of unicast packets received */ + __le32 rx_mcast_pkts; /* # of multicast packets received */ + __le32 tx_rate; /* Rate of last successful tx frame */ + __le32 rx_rate; /* Rate of last successful rx frame */ + __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ + __le32 rx_decrypt_failures; /* # of packet decrypted failed */ +}; + +struct brcmf_chanspec_list { + __le32 count; /* # of entries */ + __le32 element[1]; /* variable length uint32 list */ +}; + +/* + * WLC_E_PROBRESP_MSG + * WLC_E_P2P_PROBREQ_MSG + * WLC_E_ACTION_FRAME_RX + */ +struct brcmf_rx_mgmt_data { + __be16 version; + __be16 chanspec; + __be32 rssi; + __be32 mactime; + __be32 rate; +}; + #endif /* FWIL_TYPES_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index d0cd0bf95c5a..c3e7d76dbf35 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -27,7 +27,6 @@ #include <brcmu_utils.h> #include <brcmu_wifi.h> #include "dhd.h" -#include "dhd_proto.h" #include "dhd_dbg.h" #include "dhd_bus.h" #include "fwil.h" @@ -36,6 +35,7 @@ #include "fwsignal.h" #include "p2p.h" #include "wl_cfg80211.h" +#include "proto.h" /** * DOC: Firmware Signalling @@ -105,6 +105,7 @@ static struct { }; #undef BRCMF_FWS_TLV_DEF + static const char *brcmf_fws_get_tlv_name(enum brcmf_fws_tlv_type id) { int i; @@ -123,6 +124,12 @@ static const char *brcmf_fws_get_tlv_name(enum brcmf_fws_tlv_type id) #endif /* DEBUG */ /* + * The PKTTAG tlv has additional bytes when firmware-signalling + * mode has REUSESEQ flag set. + */ +#define BRCMF_FWS_TYPE_SEQ_LEN 2 + +/* * flags used to enable tlv signalling from firmware. */ #define BRCMF_FWS_FLAGS_RSSI_SIGNALS 0x0001 @@ -147,8 +154,15 @@ static const char *brcmf_fws_get_tlv_name(enum brcmf_fws_tlv_type id) #define BRCMF_FWS_HTOD_FLAG_PKTFROMHOST 0x01 #define BRCMF_FWS_HTOD_FLAG_PKT_REQUESTED 0x02 -#define BRCMF_FWS_RET_OK_NOSCHEDULE 0 -#define BRCMF_FWS_RET_OK_SCHEDULE 1 +#define BRCMF_FWS_RET_OK_NOSCHEDULE 0 +#define BRCMF_FWS_RET_OK_SCHEDULE 1 + +#define BRCMF_FWS_MODE_REUSESEQ_SHIFT 3 /* seq reuse */ +#define BRCMF_FWS_MODE_SET_REUSESEQ(x, val) ((x) = \ + ((x) & ~(1 << BRCMF_FWS_MODE_REUSESEQ_SHIFT)) | \ + (((val) & 1) << BRCMF_FWS_MODE_REUSESEQ_SHIFT)) +#define BRCMF_FWS_MODE_GET_REUSESEQ(x) \ + (((x) >> BRCMF_FWS_MODE_REUSESEQ_SHIFT) & 1) /** * enum brcmf_fws_skb_state - indicates processing state of skb. @@ -171,6 +185,7 @@ enum brcmf_fws_skb_state { * @bus_flags: 2 bytes reserved for bus specific parameters * @if_flags: holds interface index and packet related flags. * @htod: host to device packet identifier (used in PKTTAG tlv). + * @htod_seq: this 16-bit is original seq number for every suppress packet. * @state: transmit state of the packet. * @mac: descriptor related to destination for this packet. * @@ -181,6 +196,7 @@ struct brcmf_skbuff_cb { u16 bus_flags; u16 if_flags; u32 htod; + u16 htod_seq; enum brcmf_fws_skb_state state; struct brcmf_fws_mac_descriptor *mac; }; @@ -257,6 +273,22 @@ struct brcmf_skbuff_cb { BRCMF_SKB_HTOD_TAG_ ## field ## _MASK, \ BRCMF_SKB_HTOD_TAG_ ## field ## _SHIFT) +#define BRCMF_SKB_HTOD_SEQ_FROMFW_MASK 0x2000 +#define BRCMF_SKB_HTOD_SEQ_FROMFW_SHIFT 13 +#define BRCMF_SKB_HTOD_SEQ_FROMDRV_MASK 0x1000 +#define BRCMF_SKB_HTOD_SEQ_FROMDRV_SHIFT 12 +#define BRCMF_SKB_HTOD_SEQ_NR_MASK 0x0fff +#define BRCMF_SKB_HTOD_SEQ_NR_SHIFT 0 + +#define brcmf_skb_htod_seq_set_field(skb, field, value) \ + brcmu_maskset16(&(brcmf_skbcb(skb)->htod_seq), \ + BRCMF_SKB_HTOD_SEQ_ ## field ## _MASK, \ + BRCMF_SKB_HTOD_SEQ_ ## field ## _SHIFT, (value)) +#define brcmf_skb_htod_seq_get_field(skb, field) \ + brcmu_maskget16(brcmf_skbcb(skb)->htod_seq, \ + BRCMF_SKB_HTOD_SEQ_ ## field ## _MASK, \ + BRCMF_SKB_HTOD_SEQ_ ## field ## _SHIFT) + #define BRCMF_FWS_TXSTAT_GENERATION_MASK 0x80000000 #define BRCMF_FWS_TXSTAT_GENERATION_SHIFT 31 #define BRCMF_FWS_TXSTAT_FLAGS_MASK 0x78000000 @@ -265,8 +297,8 @@ struct brcmf_skbuff_cb { #define BRCMF_FWS_TXSTAT_FIFO_SHIFT 24 #define BRCMF_FWS_TXSTAT_HSLOT_MASK 0x00FFFF00 #define BRCMF_FWS_TXSTAT_HSLOT_SHIFT 8 -#define BRCMF_FWS_TXSTAT_PKTID_MASK 0x00FFFFFF -#define BRCMF_FWS_TXSTAT_PKTID_SHIFT 0 +#define BRCMF_FWS_TXSTAT_FREERUN_MASK 0x000000FF +#define BRCMF_FWS_TXSTAT_FREERUN_SHIFT 0 #define brcmf_txstatus_get_field(txs, field) \ brcmu_maskget32(txs, BRCMF_FWS_TXSTAT_ ## field ## _MASK, \ @@ -443,6 +475,7 @@ struct brcmf_fws_info { unsigned long borrow_defer_timestamp; bool bus_flow_blocked; bool creditmap_received; + u8 mode; }; /* @@ -805,20 +838,23 @@ static void brcmf_fws_cleanup(struct brcmf_fws_info *fws, int ifidx) brcmf_fws_hanger_cleanup(fws, matchfn, ifidx); } -static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb) +static u8 brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb) { struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac; u8 *wlh; u16 data_offset = 0; u8 fillers; __le32 pkttag = cpu_to_le32(brcmf_skbcb(skb)->htod); + __le16 pktseq = cpu_to_le16(brcmf_skbcb(skb)->htod_seq); - brcmf_dbg(TRACE, "enter: %s, idx=%d pkttag=0x%08X, hslot=%d\n", + brcmf_dbg(TRACE, "enter: %s, idx=%d hslot=%d htod %X seq %X\n", entry->name, brcmf_skb_if_flags_get_field(skb, INDEX), - le32_to_cpu(pkttag), (le32_to_cpu(pkttag) >> 8) & 0xffff); + (le32_to_cpu(pkttag) >> 8) & 0xffff, + brcmf_skbcb(skb)->htod, brcmf_skbcb(skb)->htod_seq); if (entry->send_tim_signal) data_offset += 2 + BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN; - + if (BRCMF_FWS_MODE_GET_REUSESEQ(fws->mode)) + data_offset += BRCMF_FWS_TYPE_SEQ_LEN; /* +2 is for Type[1] and Len[1] in TLV, plus TIM signal */ data_offset += 2 + BRCMF_FWS_TYPE_PKTTAG_LEN; fillers = round_up(data_offset, 4) - data_offset; @@ -830,7 +866,12 @@ static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb) wlh[0] = BRCMF_FWS_TYPE_PKTTAG; wlh[1] = BRCMF_FWS_TYPE_PKTTAG_LEN; memcpy(&wlh[2], &pkttag, sizeof(pkttag)); - wlh += BRCMF_FWS_TYPE_PKTTAG_LEN + 2; + if (BRCMF_FWS_MODE_GET_REUSESEQ(fws->mode)) { + wlh[1] += BRCMF_FWS_TYPE_SEQ_LEN; + memcpy(&wlh[2 + BRCMF_FWS_TYPE_PKTTAG_LEN], &pktseq, + sizeof(pktseq)); + } + wlh += wlh[1] + 2; if (entry->send_tim_signal) { entry->send_tim_signal = 0; @@ -846,9 +887,7 @@ static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb) if (fillers) memset(wlh, BRCMF_FWS_TYPE_FILLER, fillers); - brcmf_proto_hdrpush(fws->drvr, brcmf_skb_if_flags_get_field(skb, INDEX), - data_offset >> 2, skb); - return 0; + return (u8)(data_offset >> 2); } static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws, @@ -856,10 +895,11 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws, int fifo, bool send_immediately) { struct sk_buff *skb; - struct brcmf_bus *bus; struct brcmf_skbuff_cb *skcb; s32 err; u32 len; + u8 data_offset; + int ifidx; /* check delayedQ and suppressQ in one call using bitmap */ if (brcmu_pktq_mlen(&entry->psq, 3 << (fifo * 2)) == 0) @@ -875,6 +915,7 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws, /* create a dummy packet and sent that. The traffic */ /* bitmap info will automatically be attached to that packet */ len = BRCMF_FWS_TYPE_PKTTAG_LEN + 2 + + BRCMF_FWS_TYPE_SEQ_LEN + BRCMF_FWS_TYPE_PENDING_TRAFFIC_BMP_LEN + 2 + 4 + fws->drvr->hdrlen; skb = brcmu_pkt_buf_get_skb(len); @@ -884,13 +925,13 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws, skcb = brcmf_skbcb(skb); skcb->mac = entry; skcb->state = BRCMF_FWS_SKBSTATE_TIM; - bus = fws->drvr->bus_if; - err = brcmf_fws_hdrpush(fws, skb); - if (err == 0) { - brcmf_fws_unlock(fws); - err = brcmf_bus_txdata(bus, skb); - brcmf_fws_lock(fws); - } + skcb->htod = 0; + skcb->htod_seq = 0; + data_offset = brcmf_fws_hdrpush(fws, skb); + ifidx = brcmf_skb_if_flags_get_field(skb, INDEX); + brcmf_fws_unlock(fws); + err = brcmf_proto_txdata(fws->drvr, ifidx, data_offset, skb); + brcmf_fws_lock(fws); if (err) brcmu_pkt_buf_free_skb(skb); return true; @@ -1172,8 +1213,13 @@ static int brcmf_fws_enq(struct brcmf_fws_info *fws, { int prec = 2 * fifo; u32 *qfull_stat = &fws->stats.delayq_full_error; - struct brcmf_fws_mac_descriptor *entry; + struct pktq *pq; + struct sk_buff_head *queue; + struct sk_buff *p_head; + struct sk_buff *p_tail; + u32 fr_new; + u32 fr_compare; entry = brcmf_skbcb(p)->mac; if (entry == NULL) { @@ -1185,9 +1231,55 @@ static int brcmf_fws_enq(struct brcmf_fws_info *fws, if (state == BRCMF_FWS_SKBSTATE_SUPPRESSED) { prec += 1; qfull_stat = &fws->stats.supprq_full_error; - } - if (brcmu_pktq_penq(&entry->psq, prec, p) == NULL) { + /* Fix out of order delivery of frames. Dont assume frame */ + /* can be inserted at the end, but look for correct position */ + pq = &entry->psq; + if (pktq_full(pq) || pktq_pfull(pq, prec)) { + *qfull_stat += 1; + return -ENFILE; + } + queue = &pq->q[prec].skblist; + + p_head = skb_peek(queue); + p_tail = skb_peek_tail(queue); + fr_new = brcmf_skb_htod_tag_get_field(p, FREERUN); + + while (p_head != p_tail) { + fr_compare = brcmf_skb_htod_tag_get_field(p_tail, + FREERUN); + /* be sure to handle wrap of 256 */ + if (((fr_new > fr_compare) && + ((fr_new - fr_compare) < 128)) || + ((fr_new < fr_compare) && + ((fr_compare - fr_new) > 128))) + break; + p_tail = skb_queue_prev(queue, p_tail); + } + /* Position found. Determine what to do */ + if (p_tail == NULL) { + /* empty list */ + __skb_queue_tail(queue, p); + } else { + fr_compare = brcmf_skb_htod_tag_get_field(p_tail, + FREERUN); + if (((fr_new > fr_compare) && + ((fr_new - fr_compare) < 128)) || + ((fr_new < fr_compare) && + ((fr_compare - fr_new) > 128))) { + /* After tail */ + __skb_queue_after(queue, p_tail, p); + } else { + /* Before tail */ + __skb_insert(p, p_tail->prev, p_tail, queue); + } + } + + /* Complete the counters and statistics */ + pq->len++; + if (pq->hi_prec < prec) + pq->hi_prec = (u8) prec; + } else if (brcmu_pktq_penq(&entry->psq, prec, p) == NULL) { *qfull_stat += 1; return -ENFILE; } @@ -1277,7 +1369,8 @@ done: } static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo, - struct sk_buff *skb, u32 genbit) + struct sk_buff *skb, u32 genbit, + u16 seq) { struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac; u32 hslot; @@ -1297,9 +1390,19 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo, entry->generation = genbit; ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb); - if (ret == 0) + if (ret == 0) { + brcmf_skb_htod_tag_set_field(skb, GENERATION, genbit); + brcmf_skbcb(skb)->htod_seq = seq; + if (brcmf_skb_htod_seq_get_field(skb, FROMFW)) { + brcmf_skb_htod_seq_set_field(skb, FROMDRV, 1); + brcmf_skb_htod_seq_set_field(skb, FROMFW, 0); + } else { + brcmf_skb_htod_seq_set_field(skb, FROMDRV, 0); + } ret = brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_SUPPRESSED, fifo, skb); + } + if (ret != 0) { /* suppress q is full or hdrpull failed, drop this packet */ brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb, @@ -1317,7 +1420,7 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo, static int brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot, - u32 genbit) + u32 genbit, u16 seq) { u32 fifo; int ret; @@ -1360,8 +1463,8 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot, if (entry->suppressed && entry->suppr_transit_count) entry->suppr_transit_count--; - brcmf_dbg(DATA, "%s flags %X htod %X\n", entry->name, skcb->if_flags, - skcb->htod); + brcmf_dbg(DATA, "%s flags %d htod %X seq %X\n", entry->name, flags, + skcb->htod, seq); /* pick up the implicit credit from this packet */ fifo = brcmf_skb_htod_tag_get_field(skb, FIFO); @@ -1374,7 +1477,8 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot, brcmf_fws_macdesc_return_req_credit(skb); if (!remove_from_hanger) - ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, genbit); + ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, genbit, + seq); if (remove_from_hanger || ret) brcmf_txfinalize(fws->drvr, skb, true); @@ -1406,10 +1510,12 @@ static int brcmf_fws_fifocreditback_indicate(struct brcmf_fws_info *fws, static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 *data) { __le32 status_le; + __le16 seq_le; u32 status; u32 hslot; u32 genbit; u8 flags; + u16 seq; fws->stats.txs_indicate++; memcpy(&status_le, data, sizeof(status_le)); @@ -1417,9 +1523,16 @@ static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 *data) flags = brcmf_txstatus_get_field(status, FLAGS); hslot = brcmf_txstatus_get_field(status, HSLOT); genbit = brcmf_txstatus_get_field(status, GENERATION); + if (BRCMF_FWS_MODE_GET_REUSESEQ(fws->mode)) { + memcpy(&seq_le, &data[BRCMF_FWS_TYPE_PKTTAG_LEN], + sizeof(seq_le)); + seq = le16_to_cpu(seq_le); + } else { + seq = 0; + } brcmf_fws_lock(fws); - brcmf_fws_txs_process(fws, flags, hslot, genbit); + brcmf_fws_txs_process(fws, flags, hslot, genbit, seq); brcmf_fws_unlock(fws); return BRCMF_FWS_RET_OK_NOSCHEDULE; } @@ -1603,15 +1716,15 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len, return 0; } -static void brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo, +static u8 brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo, struct sk_buff *p) { struct brcmf_skbuff_cb *skcb = brcmf_skbcb(p); struct brcmf_fws_mac_descriptor *entry = skcb->mac; u8 flags; - brcmf_skb_if_flags_set_field(p, TRANSMIT, 1); - brcmf_skb_htod_tag_set_field(p, GENERATION, entry->generation); + if (skcb->state != BRCMF_FWS_SKBSTATE_SUPPRESSED) + brcmf_skb_htod_tag_set_field(p, GENERATION, entry->generation); flags = BRCMF_FWS_HTOD_FLAG_PKTFROMHOST; if (brcmf_skb_if_flags_get_field(p, REQUESTED)) { /* @@ -1621,7 +1734,7 @@ static void brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo, flags |= BRCMF_FWS_HTOD_FLAG_PKT_REQUESTED; } brcmf_skb_htod_tag_set_field(p, FLAGS, flags); - brcmf_fws_hdrpush(fws, p); + return brcmf_fws_hdrpush(fws, p); } static void brcmf_fws_rollback_toq(struct brcmf_fws_info *fws, @@ -1652,7 +1765,7 @@ static void brcmf_fws_rollback_toq(struct brcmf_fws_info *fws, fws->stats.rollback_failed++; hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT); brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, - hslot, 0); + hslot, 0, 0); } else { fws->stats.rollback_success++; brcmf_fws_return_credits(fws, fifo, 1); @@ -1689,20 +1802,21 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo, { struct brcmf_skbuff_cb *skcb = brcmf_skbcb(skb); struct brcmf_fws_mac_descriptor *entry; - struct brcmf_bus *bus = fws->drvr->bus_if; int rc; u8 ifidx; + u8 data_offset; entry = skcb->mac; if (IS_ERR(entry)) return PTR_ERR(entry); - brcmf_fws_precommit_skb(fws, fifo, skb); + data_offset = brcmf_fws_precommit_skb(fws, fifo, skb); entry->transit_count++; if (entry->suppressed) entry->suppr_transit_count++; + ifidx = brcmf_skb_if_flags_get_field(skb, INDEX); brcmf_fws_unlock(fws); - rc = brcmf_bus_txdata(bus, skb); + rc = brcmf_proto_txdata(fws->drvr, ifidx, data_offset, skb); brcmf_fws_lock(fws); brcmf_dbg(DATA, "%s flags %X htod %X bus_tx %d\n", entry->name, skcb->if_flags, skcb->htod, rc); @@ -1732,6 +1846,8 @@ static int brcmf_fws_assign_htod(struct brcmf_fws_info *fws, struct sk_buff *p, struct brcmf_skbuff_cb *skcb = brcmf_skbcb(p); int rc, hslot; + skcb->htod = 0; + skcb->htod_seq = 0; hslot = brcmf_fws_hanger_get_free_slot(&fws->hanger); brcmf_skb_htod_tag_set_field(p, HSLOT, hslot); brcmf_skb_htod_tag_set_field(p, FREERUN, skcb->mac->seq[fifo]); @@ -1757,7 +1873,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) brcmf_dbg(DATA, "tx proto=0x%X\n", ntohs(eh->h_proto)); /* determine the priority */ if (!skb->priority) - skb->priority = cfg80211_classify8021d(skb); + skb->priority = cfg80211_classify8021d(skb, NULL); drvr->tx_multicast += !!multicast; if (pae) @@ -1861,10 +1977,9 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker) &skb, true); ifidx = brcmf_skb_if_flags_get_field(skb, INDEX); - brcmf_proto_hdrpush(drvr, ifidx, 0, skb); - /* Use bus module to send data frame */ + /* Use proto layer to send data frame */ brcmf_fws_unlock(fws); - ret = brcmf_bus_txdata(drvr->bus_if, skb); + ret = brcmf_proto_txdata(drvr, ifidx, 0, skb); brcmf_fws_lock(fws); if (ret < 0) brcmf_txfinalize(drvr, skb, false); @@ -1908,6 +2023,7 @@ int brcmf_fws_init(struct brcmf_pub *drvr) struct brcmf_fws_info *fws; u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS; int rc; + u32 mode; drvr->fws = kzalloc(sizeof(*(drvr->fws)), GFP_KERNEL); if (!drvr->fws) { @@ -1966,6 +2082,18 @@ int brcmf_fws_init(struct brcmf_pub *drvr) if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1)) brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n"); + /* Enable seq number reuse, if supported */ + if (brcmf_fil_iovar_int_get(drvr->iflist[0], "wlfc_mode", &mode) == 0) { + if (BRCMF_FWS_MODE_GET_REUSESEQ(mode)) { + mode = 0; + BRCMF_FWS_MODE_SET_REUSESEQ(mode, 1); + if (brcmf_fil_iovar_int_set(drvr->iflist[0], + "wlfc_mode", mode) == 0) { + BRCMF_FWS_MODE_SET_REUSESEQ(fws->mode, 1); + } + } + } + brcmf_fws_hanger_init(&fws->hanger); brcmf_fws_macdesc_init(&fws->desc.other, NULL, 0); brcmf_fws_macdesc_set_name(fws, &fws->desc.other); @@ -2022,7 +2150,7 @@ void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb) } brcmf_fws_lock(fws); hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT); - brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, hslot, 0); + brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, hslot, 0, 0); brcmf_fws_unlock(fws); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 4a2293041821..fc4f98b275d7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -812,7 +812,7 @@ static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg, struct ieee80211_channel *chan = request->channels[i]; if (chan->flags & (IEEE80211_CHAN_RADAR | - IEEE80211_CHAN_PASSIVE_SCAN)) + IEEE80211_CHAN_NO_IR)) continue; chanspecs[i] = channel_to_chanspec(&p2p->cfg->d11inf, @@ -1243,7 +1243,7 @@ bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, IEEE80211_P2P_ATTR_DEVICE_ID, p2p_dev_addr, sizeof(p2p_dev_addr)); if ((err >= 0) && - (!memcmp(p2p_dev_addr, afx_hdl->tx_dst_addr, ETH_ALEN))) { + (ether_addr_equal(p2p_dev_addr, afx_hdl->tx_dst_addr))) { if (!bi->ctl_ch) { ch.chspec = le16_to_cpu(bi->chanspec); cfg->d11inf.decchspec(&ch); @@ -1380,8 +1380,7 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, (brcmf_p2p_gon_req_collision(p2p, (u8 *)e->addr))) { if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) && - (memcmp(afx_hdl->tx_dst_addr, e->addr, - ETH_ALEN) == 0)) { + (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) { afx_hdl->peer_chan = ch.chnum; brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n", afx_hdl->peer_chan); @@ -1865,7 +1864,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, cfg->d11inf.decchspec(&ch); if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) && - (memcmp(afx_hdl->tx_dst_addr, e->addr, ETH_ALEN) == 0)) { + (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) { afx_hdl->peer_chan = ch.chnum; brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n", afx_hdl->peer_chan); @@ -1956,21 +1955,21 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); if (err < 0) { brcmf_err("set p2p_disc error\n"); - brcmf_free_vif(cfg, p2p_vif); + brcmf_free_vif(p2p_vif); goto exit; } /* obtain bsscfg index for P2P discovery */ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); if (err < 0) { brcmf_err("retrieving discover bsscfg index failed\n"); - brcmf_free_vif(cfg, p2p_vif); + brcmf_free_vif(p2p_vif); goto exit; } /* Verify that firmware uses same bssidx as driver !! */ if (p2p_ifp->bssidx != bssidx) { brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", bssidx, p2p_ifp->bssidx); - brcmf_free_vif(cfg, p2p_vif); + brcmf_free_vif(p2p_vif); goto exit; } @@ -1998,7 +1997,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); /* remove discovery interface */ - brcmf_free_vif(p2p->cfg, vif); + brcmf_free_vif(vif); p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ @@ -2223,7 +2222,7 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p, return &p2p_vif->wdev; fail: - brcmf_free_vif(p2p->cfg, p2p_vif); + brcmf_free_vif(p2p_vif); return ERR_PTR(err); } @@ -2232,31 +2231,12 @@ fail: * * @vif: virtual interface object to delete. */ -static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, +static void brcmf_p2p_delete_p2pdev(struct brcmf_p2p_info *p2p, struct brcmf_cfg80211_vif *vif) { cfg80211_unregister_wdev(&vif->wdev); - cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - brcmf_free_vif(cfg, vif); -} - -/** - * brcmf_p2p_free_p2p_if() - free up net device related data. - * - * @ndev: net device that needs to be freed. - */ -static void brcmf_p2p_free_p2p_if(struct net_device *ndev) -{ - struct brcmf_cfg80211_info *cfg; - struct brcmf_cfg80211_vif *vif; - struct brcmf_if *ifp; - - ifp = netdev_priv(ndev); - cfg = ifp->drvr->config; - vif = ifp->vif; - - brcmf_free_vif(cfg, vif); - free_netdev(ifp->ndev); + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; + brcmf_free_vif(vif); } /** @@ -2336,8 +2316,6 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, brcmf_err("Registering netdevice failed\n"); goto fail; } - /* override destructor */ - ifp->ndev->destructor = brcmf_p2p_free_p2p_if; cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ @@ -2350,7 +2328,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return &ifp->vif->wdev; fail: - brcmf_free_vif(cfg, vif); + brcmf_free_vif(vif); return ERR_PTR(err); } @@ -2359,8 +2337,6 @@ fail: * * @wiphy: wiphy device of interface. * @wdev: wireless device of interface. - * - * TODO: not yet supported. */ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { @@ -2386,7 +2362,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; case NL80211_IFTYPE_P2P_DEVICE: - brcmf_p2p_delete_p2pdev(cfg, vif); + brcmf_p2p_delete_p2pdev(p2p, vif); return 0; default: return -ENOTSUPP; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/proto.c b/drivers/net/wireless/brcm80211/brcmfmac/proto.c new file mode 100644 index 000000000000..b6b464184946 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.c @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + + + #include <linux/types.h> +#include <linux/slab.h> +#include <linux/netdevice.h> + +#include <brcmu_wifi.h> +#include "dhd.h" +#include "dhd_dbg.h" +#include "proto.h" +#include "bcdc.h" + + +int brcmf_proto_attach(struct brcmf_pub *drvr) +{ + struct brcmf_proto *proto; + + proto = kzalloc(sizeof(*proto), GFP_ATOMIC); + if (!proto) + goto fail; + + drvr->proto = proto; + /* BCDC protocol is only protocol supported for the moment */ + if (brcmf_proto_bcdc_attach(drvr)) + goto fail; + + if ((proto->txdata == NULL) || (proto->hdrpull == NULL) || + (proto->query_dcmd == NULL) || (proto->set_dcmd == NULL)) { + brcmf_err("Not all proto handlers have been installed\n"); + goto fail; + } + return 0; + +fail: + kfree(proto); + drvr->proto = NULL; + return -ENOMEM; +} + +void brcmf_proto_detach(struct brcmf_pub *drvr) +{ + if (drvr->proto) { + brcmf_proto_bcdc_detach(drvr); + kfree(drvr->proto); + drvr->proto = NULL; + } +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/proto.h b/drivers/net/wireless/brcm80211/brcmfmac/proto.h new file mode 100644 index 000000000000..482fb0ba4a30 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.h @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef BRCMFMAC_PROTO_H +#define BRCMFMAC_PROTO_H + +struct brcmf_proto { + int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, + struct sk_buff *skb); + int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, + void *buf, uint len); + int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, + uint len); + int (*txdata)(struct brcmf_pub *drvr, int ifidx, u8 offset, + struct sk_buff *skb); + void *pd; +}; + + +int brcmf_proto_attach(struct brcmf_pub *drvr); +void brcmf_proto_detach(struct brcmf_pub *drvr); + +static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, + u8 *ifidx, struct sk_buff *skb) +{ + return drvr->proto->hdrpull(drvr, do_fws, ifidx, skb); +} +static inline int brcmf_proto_query_dcmd(struct brcmf_pub *drvr, int ifidx, + uint cmd, void *buf, uint len) +{ + return drvr->proto->query_dcmd(drvr, ifidx, cmd, buf, len); +} +static inline int brcmf_proto_set_dcmd(struct brcmf_pub *drvr, int ifidx, + uint cmd, void *buf, uint len) +{ + return drvr->proto->set_dcmd(drvr, ifidx, cmd, buf, len); +} +static inline int brcmf_proto_txdata(struct brcmf_pub *drvr, int ifidx, + u8 offset, struct sk_buff *skb) +{ + return drvr->proto->txdata(drvr, ifidx, offset, skb); +} + + +#endif /* BRCMFMAC_PROTO_H */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index 2096a14ef1fb..9fd40675f18e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -19,6 +19,7 @@ #include <linux/netdevice.h> #include <linux/mmc/card.h> #include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> #include <linux/ssb/ssb_regs.h> #include <linux/bcma/bcma.h> @@ -83,6 +84,24 @@ static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { {0, 0x1} }; +/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */ +static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = { + {6, 0x7}, + {5, 0x6}, + {4, 0x5}, + {3, 0x4}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */ +static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = { + {3, 0x3}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} }; + /* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { {16, 0x7}, @@ -112,9 +131,9 @@ brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidhigh), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbidhigh), + NULL); return SBCOREREV(regdata); } @@ -140,9 +159,9 @@ brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev, if (idx == BRCMF_MAX_CORENUM) return false; - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT | SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK); return (SSB_TMSLOW_CLOCK == regdata); @@ -160,13 +179,13 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev, if (idx == BRCMF_MAX_CORENUM) return false; - regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK; - regdata = brcmf_sdio_regrl(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0); return ret; @@ -182,79 +201,79 @@ brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); base = ci->c_inf[idx].base; - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); + regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); if (regdata & SSB_TMSLOW_RESET) return; - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); + regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); if ((regdata & SSB_TMSLOW_CLOCK) != 0) { /* * set target reject and spin until busy is clear * (preserve core-specific bits) */ - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), - NULL); - brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), - regdata | SSB_TMSLOW_REJECT, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbtmstatelow), NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + regdata | SSB_TMSLOW_REJECT, NULL); - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbtmstatelow), NULL); udelay(1); - SPINWAIT((brcmf_sdio_regrl(sdiodev, - CORE_SB(base, sbtmstatehigh), - NULL) & - SSB_TMSHIGH_BUSY), 100000); - - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(base, sbtmstatehigh), - NULL); + SPINWAIT((brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbtmstatehigh), + NULL) & + SSB_TMSHIGH_BUSY), 100000); + + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbtmstatehigh), + NULL); if (regdata & SSB_TMSHIGH_BUSY) brcmf_err("core state still busy\n"); - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow), + NULL); if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); regdata |= SSB_IMSTATE_REJECT; - brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), - regdata, NULL); - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate), + regdata, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); udelay(1); - SPINWAIT((brcmf_sdio_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL) & - SSB_IMSTATE_BUSY), 100000); + SPINWAIT((brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL) & + SSB_IMSTATE_BUSY), 100000); } /* set reset and reject while enabling the clocks */ regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET; - brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), - regdata, NULL); - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), - NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + regdata, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbtmstatelow), NULL); udelay(10); /* clear the initiator reject bit */ - regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow), + NULL); if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); regdata &= ~SSB_IMSTATE_REJECT; - brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), - regdata, NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate), + regdata, NULL); } } /* leave reset and reject asserted */ - brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), - (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL); udelay(1); } @@ -270,9 +289,9 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, return; /* if core is already in reset, just return */ - regdata = brcmf_sdio_regrl(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); if ((regdata & BCMA_RESET_CTL_RESET) != 0) return; @@ -281,24 +300,24 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, * extra 10ms is taken into account for firmware load stage * after 10300us carry on disabling the core anyway */ - SPINWAIT(brcmf_sdio_regrl(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_ST, - NULL), 10300); - regdata = brcmf_sdio_regrl(sdiodev, + SPINWAIT(brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_ST, - NULL); + NULL), 10300); + regdata = brcmf_sdiod_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_ST, + NULL); if (regdata) brcmf_err("disabling core 0x%x with reset status %x\n", coreid, regdata); - brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - BCMA_RESET_CTL_RESET, NULL); + brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + BCMA_RESET_CTL_RESET, NULL); udelay(1); - brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - core_bits, NULL); - regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - NULL); + brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + core_bits, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); usleep_range(10, 20); } @@ -325,47 +344,47 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev, * set reset while enabling the clock and * forcing them on throughout the core */ - brcmf_sdio_regwl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET, - NULL); - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); + brcmf_sdiod_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET, + NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); /* clear any serror */ - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), + NULL); if (regdata & SSB_TMSHIGH_SERR) - brcmf_sdio_regwl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), - 0, NULL); + brcmf_sdiod_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), + 0, NULL); - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), - NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbimstate), + NULL); if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) - brcmf_sdio_regwl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), - regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO), - NULL); + brcmf_sdiod_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbimstate), + regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO), + NULL); /* clear reset and allow it to propagate throughout the core */ - brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL); - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); /* leave clock enabled */ - brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - SSB_TMSLOW_CLOCK, NULL); - regdata = brcmf_sdio_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); + brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_CLOCK, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); } @@ -384,21 +403,21 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev, brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, core_bits); /* now do initialization sequence */ - brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - core_bits | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); - regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - NULL); - brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 0, NULL); - regdata = brcmf_sdio_regrl(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - NULL); + brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + core_bits | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); + brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + 0, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); udelay(1); - brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - core_bits | BCMA_IOCTL_CLK, NULL); - regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - NULL); + brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + core_bits | BCMA_IOCTL_CLK, NULL); + regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); udelay(1); } @@ -438,7 +457,7 @@ static inline int brcmf_sdio_chip_cichk(struct chip_info *ci) #endif static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, - struct chip_info *ci, u32 regs) + struct chip_info *ci) { u32 regdata; int ret; @@ -449,10 +468,10 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, * other ways of recognition should be added here. */ ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON; - ci->c_inf[0].base = regs; - regdata = brcmf_sdio_regrl(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipid), - NULL); + ci->c_inf[0].base = SI_ENUM_BASE; + regdata = brcmf_sdiod_regrl(sdiodev, + CORE_CC_REG(ci->c_inf[0].base, chipid), + NULL); ci->chip = regdata & CID_ID_MASK; ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 && @@ -569,6 +588,23 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, ci->ramsize = 0xc0000; ci->rambase = 0x180000; break; + case BCM43362_CHIP_ID: + ci->c_inf[0].wrapbase = 0x18100000; + ci->c_inf[0].cib = 0x27004211; + ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; + ci->c_inf[1].base = 0x18002000; + ci->c_inf[1].wrapbase = 0x18102000; + ci->c_inf[1].cib = 0x0a004211; + ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; + ci->c_inf[2].base = 0x18004000; + ci->c_inf[2].wrapbase = 0x18104000; + ci->c_inf[2].cib = 0x08080401; + ci->c_inf[3].id = BCMA_CORE_ARM_CM3; + ci->c_inf[3].base = 0x18003000; + ci->c_inf[3].wrapbase = 0x18103000; + ci->c_inf[3].cib = 0x03004211; + ci->ramsize = 0x3C000; + break; default: brcmf_err("chipid 0x%x is not supported\n", ci->chip); return -ENODEV; @@ -607,7 +643,7 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* Try forcing SDIO core to do ALPAvail request only */ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; - brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); if (err) { brcmf_err("error writing for HT off\n"); return err; @@ -615,8 +651,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* If register supported, wait for ALPAvail and then force ALP */ /* This may take up to 15 milliseconds */ - clkval = brcmf_sdio_regrb(sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, NULL); + clkval = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL); if ((clkval & ~SBSDIO_AVBITS) != clkset) { brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", @@ -624,8 +660,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) return -EACCES; } - SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), !SBSDIO_ALPAV(clkval)), PMU_MAX_TRANSITION_DLY); if (!SBSDIO_ALPAV(clkval)) { @@ -635,11 +671,11 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) } clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; - brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); udelay(65); /* Also, disable the extra SDIO pull-ups */ - brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); return 0; } @@ -654,16 +690,16 @@ brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev, ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id); /* get chipcommon capabilites */ - ci->c_inf[0].caps = brcmf_sdio_regrl(sdiodev, - CORE_CC_REG(base, capabilities), - NULL); + ci->c_inf[0].caps = brcmf_sdiod_regrl(sdiodev, + CORE_CC_REG(base, capabilities), + NULL); /* get pmu caps & rev */ if (ci->c_inf[0].caps & CC_CAP_PMU) { ci->pmucaps = - brcmf_sdio_regrl(sdiodev, - CORE_CC_REG(base, pmucapabilities), - NULL); + brcmf_sdiod_regrl(sdiodev, + CORE_CC_REG(base, pmucapabilities), + NULL); ci->pmurev = ci->pmucaps & PCAP_REV_MASK; } @@ -681,7 +717,7 @@ brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev, } int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, - struct chip_info **ci_ptr, u32 regs) + struct chip_info **ci_ptr) { int ret; struct chip_info *ci; @@ -697,16 +733,16 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, if (ret != 0) goto err; - ret = brcmf_sdio_chip_recognition(sdiodev, ci, regs); + ret = brcmf_sdio_chip_recognition(sdiodev, ci); if (ret != 0) goto err; brcmf_sdio_chip_buscoresetup(sdiodev, ci); - brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup), - 0, NULL); - brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), - 0, NULL); + brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup), + 0, NULL); + brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), + 0, NULL); *ci_ptr = ci; return 0; @@ -757,6 +793,11 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, str_mask = 0x00003800; str_shift = 11; break; + case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17): + str_tab = sdiod_drvstr_tab6_1v8; + str_mask = 0x00001800; + str_shift = 11; + break; case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17): /* note: 43143 does not support tristate */ i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; @@ -769,6 +810,11 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, brcmf_sdio_chip_name(ci->chip, chn, 8), drivestrength); break; + case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13): + str_tab = sdiod_drive_strength_tab5_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; default: brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n", brcmf_sdio_chip_name(ci->chip, chn, 8), @@ -784,12 +830,12 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, } } addr = CORE_CC_REG(base, chipcontrol_addr); - brcmf_sdio_regwl(sdiodev, addr, 1, NULL); - cc_data_temp = brcmf_sdio_regrl(sdiodev, addr, NULL); + brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); + cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); cc_data_temp &= ~str_mask; drivestrength_sel <<= str_shift; cc_data_temp |= drivestrength_sel; - brcmf_sdio_regwl(sdiodev, addr, cc_data_temp, NULL); + brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL); brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", str_tab[i].strength, drivestrength, cc_data_temp); @@ -816,8 +862,8 @@ brcmf_sdio_chip_verifynvram(struct brcmf_sdio_dev *sdiodev, u32 nvram_addr, memset(nvram_ularray, 0xaa, nvram_sz); /* Read the vars list to temp buffer for comparison */ - err = brcmf_sdio_ramrw(sdiodev, false, nvram_addr, nvram_ularray, - nvram_sz); + err = brcmf_sdiod_ramrw(sdiodev, false, nvram_addr, nvram_ularray, + nvram_sz); if (err) { brcmf_err("error %d on reading %d nvram bytes at 0x%08x\n", err, nvram_sz, nvram_addr); @@ -850,7 +896,7 @@ static bool brcmf_sdio_chip_writenvram(struct brcmf_sdio_dev *sdiodev, nvram_addr = (ci->ramsize - 4) - nvram_sz + ci->rambase; /* Write the vars list */ - err = brcmf_sdio_ramrw(sdiodev, true, nvram_addr, nvram_dat, nvram_sz); + err = brcmf_sdiod_ramrw(sdiodev, true, nvram_addr, nvram_dat, nvram_sz); if (err) { brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", err, nvram_sz, nvram_addr); @@ -874,8 +920,8 @@ static bool brcmf_sdio_chip_writenvram(struct brcmf_sdio_dev *sdiodev, nvram_addr, nvram_sz, token); /* Write the length token to the last word */ - if (brcmf_sdio_ramrw(sdiodev, true, (ci->ramsize - 4 + ci->rambase), - (u8 *)&token_le, 4)) + if (brcmf_sdiod_ramrw(sdiodev, true, (ci->ramsize - 4 + ci->rambase), + (u8 *)&token_le, 4)) return false; return true; @@ -891,7 +937,7 @@ brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev, ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0); /* clear length token */ - brcmf_sdio_ramrw(sdiodev, true, ci->ramsize - 4, (u8 *)&zeros, 4); + brcmf_sdiod_ramrw(sdiodev, true, ci->ramsize - 4, (u8 *)&zeros, 4); } static bool @@ -913,7 +959,7 @@ brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV); reg_addr = ci->c_inf[core_idx].base; reg_addr += offsetof(struct sdpcmd_regs, intstatus); - brcmf_sdio_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0); @@ -942,11 +988,11 @@ brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV); reg_addr = ci->c_inf[core_idx].base; reg_addr += offsetof(struct sdpcmd_regs, intstatus); - brcmf_sdio_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); /* Write reset vector to address 0 */ - brcmf_sdio_ramrw(sdiodev, true, 0, (void *)&ci->rst_vec, - sizeof(ci->rst_vec)); + brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&ci->rst_vec, + sizeof(ci->rst_vec)); /* restore ARM */ ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, 0); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h index 507c61c991fa..7ea424e20773 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h @@ -54,14 +54,6 @@ #define BRCMF_MAX_CORENUM 6 -/* SDIO device ID */ -#define SDIO_DEVICE_ID_BROADCOM_43143 43143 -#define SDIO_DEVICE_ID_BROADCOM_43241 0x4324 -#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329 -#define SDIO_DEVICE_ID_BROADCOM_4330 0x4330 -#define SDIO_DEVICE_ID_BROADCOM_4334 0x4334 -#define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335 - struct chip_core_info { u16 id; u16 rev; @@ -224,7 +216,7 @@ struct sdpcmd_regs { }; int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, - struct chip_info **ci_ptr, u32 regs); + struct chip_info **ci_ptr); void brcmf_sdio_chip_detach(struct chip_info **ci_ptr); void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, u32 drivestrength); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index fc0d4f0129db..092e9c824992 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -164,11 +164,9 @@ struct brcmf_sdio; struct brcmf_sdio_dev { struct sdio_func *func[SDIO_MAX_FUNCS]; u8 num_funcs; /* Supported funcs on client */ - u32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; u32 sbwad; /* Save backplane window address */ - void *bus; + struct brcmf_sdio *bus; atomic_t suspend; /* suspend flag */ - wait_queue_head_t request_byte_wait; wait_queue_head_t request_word_wait; wait_queue_head_t request_buffer_wait; struct device *dev; @@ -185,22 +183,19 @@ struct brcmf_sdio_dev { }; /* Register/deregister interrupt handler. */ -int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev); -int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev); +int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev); +int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev); /* sdio device register access interface */ -u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); -u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); -void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data, - int *ret); -void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, - int *ret); -int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, - void *data, bool write); +u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data, + int *ret); +void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, + int *ret); /* Buffer transfer to/from device (client) core via cmd53. * fn: function number - * addr: backplane address (i.e. >= regsva from attach) * flags: backplane width, address increment, sync/async * buf: pointer to memory data buffer * nbytes: number of bytes to transfer to/from buf @@ -210,17 +205,14 @@ int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, * Returns 0 or error code. * NOTE: Async operation is not currently supported. */ -int brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff_head *pktq); -int brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, u8 *buf, uint nbytes); - -int brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff *pkt); -int brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, u8 *buf, uint nbytes); -int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff_head *pktq, uint totlen); +int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq); +int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); + +int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt); +int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); +int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq, uint totlen); /* Flags bits */ @@ -236,43 +228,16 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, * nbytes: number of bytes to transfer to/from buf * Returns 0 or error code. */ -int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr, - u8 *buf, uint nbytes); -int brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, - u8 *data, uint size); +int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, + u8 *data, uint size); /* Issue an abort to the specified function */ -int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn); - -/* platform specific/high level functions */ -int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); -int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev); - -/* attach, return handler on success, NULL if failed. - * The handler shall be provided by all subsequent calls. No local cache - * cfghdl points to the starting address of pci device mapped memory - */ -int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev); -void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev); - -/* read or write one byte using cmd52 */ -int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint fnc, - uint addr, u8 *byte); - -/* read or write 2/4 bytes using cmd53 */ -int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw, uint fnc, - uint addr, u32 *word, uint nbyte); - -/* Watchdog timer interface for pm ops */ -void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable); +int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); -void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev); -void brcmf_sdbrcm_disconnect(void *ptr); -void brcmf_sdbrcm_isr(void *arg); +struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); +void brcmf_sdio_remove(struct brcmf_sdio *bus); +void brcmf_sdio_isr(struct brcmf_sdio *bus); -void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick); +void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick); -void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, - wait_queue_head_t *wq); -bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev); #endif /* _BRCM_SDH_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h b/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h index 3c67529b9074..4d7d51f95716 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h @@ -89,7 +89,7 @@ TRACE_EVENT(brcmf_hexdump, TP_printk("hexdump [addr=%lx, length=%lu]", __entry->addr, __entry->len) ); -TRACE_EVENT(brcmf_bdchdr, +TRACE_EVENT(brcmf_bcdchdr, TP_PROTO(void *data), TP_ARGS(data), TP_STRUCT__entry( @@ -107,24 +107,35 @@ TRACE_EVENT(brcmf_bdchdr, memcpy(__get_dynamic_array(signal), (u8 *)data + 4, __entry->siglen); ), - TP_printk("bdc: prio=%d siglen=%d", __entry->prio, __entry->siglen) + TP_printk("bcdc: prio=%d siglen=%d", __entry->prio, __entry->siglen) ); +#ifndef SDPCM_RX +#define SDPCM_RX 0 +#endif +#ifndef SDPCM_TX +#define SDPCM_TX 1 +#endif +#ifndef SDPCM_GLOM +#define SDPCM_GLOM 2 +#endif + TRACE_EVENT(brcmf_sdpcm_hdr, - TP_PROTO(bool tx, void *data), - TP_ARGS(tx, data), + TP_PROTO(u8 dir, void *data), + TP_ARGS(dir, data), TP_STRUCT__entry( - __field(u8, tx) + __field(u8, dir) __field(u16, len) - __array(u8, hdr, 12) + __dynamic_array(u8, hdr, dir == SDPCM_GLOM ? 20 : 12) ), TP_fast_assign( - memcpy(__entry->hdr, data, 12); - __entry->len = __entry->hdr[0] | (__entry->hdr[1] << 8); - __entry->tx = tx ? 1 : 0; + memcpy(__get_dynamic_array(hdr), data, dir == SDPCM_GLOM ? 20 : 12); + __entry->len = *(u8 *)data | (*((u8 *)data + 1) << 8); + __entry->dir = dir; ), - TP_printk("sdpcm: %s len %u, seq %d", __entry->tx ? "TX" : "RX", - __entry->len, __entry->hdr[4]) + TP_printk("sdpcm: %s len %u, seq %d", + __entry->dir == SDPCM_RX ? "RX" : "TX", + __entry->len, ((u8 *)__get_dynamic_array(hdr))[4]) ); #ifdef CONFIG_BRCM_TRACING diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 422f44c63175..c345c32eb631 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1253,9 +1253,10 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) bus->ops = &brcmf_usb_bus_ops; bus->chip = bus_pub->devid; bus->chiprev = bus_pub->chiprev; + bus->proto_type = BRCMF_PROTO_BCDC; /* Attach to the common driver interface */ - ret = brcmf_attach(0, dev); + ret = brcmf_attach(dev); if (ret) { brcmf_err("brcmf_attach failed\n"); goto fail; @@ -1454,7 +1455,7 @@ static int brcmf_usb_resume(struct usb_interface *intf) struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev); brcmf_dbg(USB, "Enter\n"); - if (!brcmf_attach(0, devinfo->dev)) + if (!brcmf_attach(devinfo->dev)) return brcmf_bus_start(&usb->dev); return 0; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 571f013cebbb..aad83aef7d93 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -202,9 +202,9 @@ static struct ieee80211_supported_band __wl_band_5ghz_a = { /* This is to override regulatory domains defined in cfg80211 module (reg.c) * By default world regulatory domain defined in reg.c puts the flags - * NL80211_RRF_PASSIVE_SCAN and NL80211_RRF_NO_IBSS for 5GHz channels (for - * 36..48 and 149..165). With respect to these flags, wpa_supplicant doesn't - * start p2p operations on 5GHz channels. All the changes in world regulatory + * NL80211_RRF_NO_IR for 5GHz channels (for * 36..48 and 149..165). + * With respect to these flags, wpa_supplicant doesn't * start p2p + * operations on 5GHz channels. All the changes in world regulatory * domain are to be done here. */ static const struct ieee80211_regdomain brcmf_regdom = { @@ -1095,10 +1095,10 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) BRCMF_C_DISASSOC, NULL, 0); if (err) { brcmf_err("WLC_DISASSOC failed (%d)\n", err); - cfg80211_disconnected(vif->wdev.netdev, 0, - NULL, 0, GFP_KERNEL); } clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state); + cfg80211_disconnected(vif->wdev.netdev, 0, NULL, 0, GFP_KERNEL); + } clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state); clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status); @@ -1758,6 +1758,7 @@ brcmf_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *ndev, return -EIO; clear_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state); + cfg80211_disconnected(ndev, reason_code, NULL, 0, GFP_KERNEL); memcpy(&scbval.ea, &profile->bssid, ETH_ALEN); scbval.val = cpu_to_le32(reason_code); @@ -2556,8 +2557,8 @@ brcmf_compare_update_same_bss(struct brcmf_cfg80211_info *cfg, ch_bss.band == ch_bss_info_le.band && bss_info_le->SSID_len == bss->SSID_len && !memcmp(bss_info_le->SSID, bss->SSID, bss_info_le->SSID_len)) { - if ((bss->flags & WLC_BSS_RSSI_ON_CHANNEL) == - (bss_info_le->flags & WLC_BSS_RSSI_ON_CHANNEL)) { + if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == + (bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL)) { s16 bss_rssi = le16_to_cpu(bss->RSSI); s16 bss_info_rssi = le16_to_cpu(bss_info_le->RSSI); @@ -2566,13 +2567,13 @@ brcmf_compare_update_same_bss(struct brcmf_cfg80211_info *cfg, */ if (bss_info_rssi > bss_rssi) bss->RSSI = bss_info_le->RSSI; - } else if ((bss->flags & WLC_BSS_RSSI_ON_CHANNEL) && - (bss_info_le->flags & WLC_BSS_RSSI_ON_CHANNEL) == 0) { + } else if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) && + (bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == 0) { /* preserve the on-channel rssi measurement * if the new measurement is off channel */ bss->RSSI = bss_info_le->RSSI; - bss->flags |= WLC_BSS_RSSI_ON_CHANNEL; + bss->flags |= BRCMF_BSS_RSSI_ON_CHANNEL; } return 1; } @@ -3973,11 +3974,12 @@ brcmf_cfg80211_mgmt_frame_register(struct wiphy *wiphy, static int brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, - struct ieee80211_channel *chan, bool offchan, - unsigned int wait, const u8 *buf, size_t len, - bool no_cck, bool dont_wait_for_ack, u64 *cookie) + struct cfg80211_mgmt_tx_params *params, u64 *cookie) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct ieee80211_channel *chan = params->chan; + const u8 *buf = params->buf; + size_t len = params->len; const struct ieee80211_mgmt *mgmt; struct brcmf_cfg80211_vif *vif; s32 err = 0; @@ -4341,7 +4343,7 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) wiphy->max_remain_on_channel_duration = 5000; brcmf_wiphy_pno_params(wiphy); brcmf_dbg(INFO, "Registering custom regulatory\n"); - wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY; + wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG; wiphy_apply_custom_regulatory(wiphy, &brcmf_regdom); err = wiphy_register(wiphy); if (err < 0) { @@ -4358,9 +4360,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, { struct brcmf_cfg80211_vif *vif; - if (cfg->vif_cnt == BRCMF_IFACE_MAX_CNT) - return ERR_PTR(-ENOSPC); - brcmf_dbg(TRACE, "allocating virtual interface (size=%zu)\n", sizeof(*vif)); vif = kzalloc(sizeof(*vif), GFP_KERNEL); @@ -4377,21 +4376,25 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, brcmf_init_prof(&vif->profile); list_add_tail(&vif->list, &cfg->vif_list); - cfg->vif_cnt++; return vif; } -void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) { list_del(&vif->list); - cfg->vif_cnt--; - kfree(vif); - if (!cfg->vif_cnt) { - wiphy_unregister(cfg->wiphy); - wiphy_free(cfg->wiphy); - } +} + +void brcmf_cfg80211_free_netdev(struct net_device *ndev) +{ + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + + ifp = netdev_priv(ndev); + vif = ifp->vif; + + brcmf_free_vif(vif); + free_netdev(ndev); } static bool brcmf_is_linkup(const struct brcmf_event_msg *e) @@ -4978,20 +4981,20 @@ cfg80211_p2p_attach_out: wl_deinit_priv(cfg); cfg80211_attach_out: - brcmf_free_vif(cfg, vif); + brcmf_free_vif(vif); return NULL; } void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) { - struct brcmf_cfg80211_vif *vif; - struct brcmf_cfg80211_vif *tmp; + if (!cfg) + return; - wl_deinit_priv(cfg); + WARN_ON(!list_empty(&cfg->vif_list)); + wiphy_unregister(cfg->wiphy); brcmf_btcoex_detach(cfg); - list_for_each_entry_safe(vif, tmp, &cfg->vif_list, list) { - brcmf_free_vif(cfg, vif); - } + wl_deinit_priv(cfg); + wiphy_free(cfg->wiphy); } static s32 @@ -5086,7 +5089,8 @@ dongle_scantime_out: } -static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, u32 bw_cap) +static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, + u32 bw_cap[]) { struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); struct ieee80211_channel *band_chan_arr; @@ -5099,7 +5103,6 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, u32 bw_cap) enum ieee80211_band band; u32 channel; u32 *n_cnt; - bool ht40_allowed; u32 index; u32 ht40_flag; bool update; @@ -5132,18 +5135,17 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, u32 bw_cap) array_size = ARRAY_SIZE(__wl_2ghz_channels); n_cnt = &__wl_band_2ghz.n_channels; band = IEEE80211_BAND_2GHZ; - ht40_allowed = (bw_cap == WLC_N_BW_40ALL); } else if (ch.band == BRCMU_CHAN_BAND_5G) { band_chan_arr = __wl_5ghz_a_channels; array_size = ARRAY_SIZE(__wl_5ghz_a_channels); n_cnt = &__wl_band_5ghz_a.n_channels; band = IEEE80211_BAND_5GHZ; - ht40_allowed = !(bw_cap == WLC_N_BW_20ALL); } else { - brcmf_err("Invalid channel Sepc. 0x%x.\n", ch.chspec); + brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec); continue; } - if (!ht40_allowed && ch.bw == BRCMU_CHAN_BW_40) + if (!(bw_cap[band] & WLC_BW_40MHZ_BIT) && + ch.bw == BRCMU_CHAN_BW_40) continue; update = false; for (j = 0; (j < *n_cnt && (*n_cnt < array_size)); j++) { @@ -5161,7 +5163,10 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, u32 bw_cap) ieee80211_channel_to_frequency(ch.chnum, band); band_chan_arr[index].hw_value = ch.chnum; - if (ch.bw == BRCMU_CHAN_BW_40 && ht40_allowed) { + brcmf_err("channel %d: f=%d bw=%d sb=%d\n", + ch.chnum, band_chan_arr[index].center_freq, + ch.bw, ch.sb); + if (ch.bw == BRCMU_CHAN_BW_40) { /* assuming the order is HT20, HT40 Upper, * HT40 lower from chanspecs */ @@ -5197,10 +5202,10 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, u32 bw_cap) if (channel & WL_CHAN_RADAR) band_chan_arr[index].flags |= (IEEE80211_CHAN_RADAR | - IEEE80211_CHAN_NO_IBSS); + IEEE80211_CHAN_NO_IR); if (channel & WL_CHAN_PASSIVE) band_chan_arr[index].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; + IEEE80211_CHAN_NO_IR; } } if (!update) @@ -5212,6 +5217,46 @@ exit: return err; } +static void brcmf_get_bwcap(struct brcmf_if *ifp, u32 bw_cap[]) +{ + u32 band, mimo_bwcap; + int err; + + band = WLC_BAND_2G; + err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &band); + if (!err) { + bw_cap[IEEE80211_BAND_2GHZ] = band; + band = WLC_BAND_5G; + err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &band); + if (!err) { + bw_cap[IEEE80211_BAND_5GHZ] = band; + return; + } + WARN_ON(1); + return; + } + brcmf_dbg(INFO, "fallback to mimo_bw_cap info\n"); + mimo_bwcap = 0; + err = brcmf_fil_iovar_int_get(ifp, "mimo_bw_cap", &mimo_bwcap); + if (err) + /* assume 20MHz if firmware does not give a clue */ + mimo_bwcap = WLC_N_BW_20ALL; + + switch (mimo_bwcap) { + case WLC_N_BW_40ALL: + bw_cap[IEEE80211_BAND_2GHZ] |= WLC_BW_40MHZ_BIT; + /* fall-thru */ + case WLC_N_BW_20IN2G_40IN5G: + bw_cap[IEEE80211_BAND_5GHZ] |= WLC_BW_40MHZ_BIT; + /* fall-thru */ + case WLC_N_BW_20ALL: + bw_cap[IEEE80211_BAND_2GHZ] |= WLC_BW_20MHZ_BIT; + bw_cap[IEEE80211_BAND_5GHZ] |= WLC_BW_20MHZ_BIT; + break; + default: + brcmf_err("invalid mimo_bw_cap value\n"); + } +} static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) { @@ -5220,13 +5265,13 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) s32 phy_list; u32 band_list[3]; u32 nmode; - u32 bw_cap = 0; + u32 bw_cap[2] = { 0, 0 }; s8 phy; s32 err; u32 nband; s32 i; - struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; - s32 index; + struct ieee80211_supported_band *bands[2] = { NULL, NULL }; + struct ieee80211_supported_band *band; err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_PHYLIST, &phy_list, sizeof(phy_list)); @@ -5252,11 +5297,10 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) if (err) { brcmf_err("nmode error (%d)\n", err); } else { - err = brcmf_fil_iovar_int_get(ifp, "mimo_bw_cap", &bw_cap); - if (err) - brcmf_err("mimo_bw_cap error (%d)\n", err); + brcmf_get_bwcap(ifp, bw_cap); } - brcmf_dbg(INFO, "nmode=%d, mimo_bw_cap=%d\n", nmode, bw_cap); + brcmf_dbg(INFO, "nmode=%d, bw_cap=(%d, %d)\n", nmode, + bw_cap[IEEE80211_BAND_2GHZ], bw_cap[IEEE80211_BAND_5GHZ]); err = brcmf_construct_reginfo(cfg, bw_cap); if (err) { @@ -5265,40 +5309,33 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) } nband = band_list[0]; - memset(bands, 0, sizeof(bands)); for (i = 1; i <= nband && i < ARRAY_SIZE(band_list); i++) { - index = -1; + band = NULL; if ((band_list[i] == WLC_BAND_5G) && - (__wl_band_5ghz_a.n_channels > 0)) { - index = IEEE80211_BAND_5GHZ; - bands[index] = &__wl_band_5ghz_a; - if ((bw_cap == WLC_N_BW_40ALL) || - (bw_cap == WLC_N_BW_20IN2G_40IN5G)) - bands[index]->ht_cap.cap |= - IEEE80211_HT_CAP_SGI_40; - } else if ((band_list[i] == WLC_BAND_2G) && - (__wl_band_2ghz.n_channels > 0)) { - index = IEEE80211_BAND_2GHZ; - bands[index] = &__wl_band_2ghz; - if (bw_cap == WLC_N_BW_40ALL) - bands[index]->ht_cap.cap |= - IEEE80211_HT_CAP_SGI_40; - } + (__wl_band_5ghz_a.n_channels > 0)) + band = &__wl_band_5ghz_a; + else if ((band_list[i] == WLC_BAND_2G) && + (__wl_band_2ghz.n_channels > 0)) + band = &__wl_band_2ghz; + else + continue; - if ((index >= 0) && nmode) { - bands[index]->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; - bands[index]->ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; - bands[index]->ht_cap.ht_supported = true; - bands[index]->ht_cap.ampdu_factor = - IEEE80211_HT_MAX_AMPDU_64K; - bands[index]->ht_cap.ampdu_density = - IEEE80211_HT_MPDU_DENSITY_16; - /* An HT shall support all EQM rates for one spatial - * stream - */ - bands[index]->ht_cap.mcs.rx_mask[0] = 0xff; + if (bw_cap[band->band] & WLC_BW_40MHZ_BIT) { + band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; + band->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; } + band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; + band->ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; + band->ht_cap.ht_supported = true; + band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16; + /* An HT shall support all EQM rates for one spatial + * stream + */ + band->ht_cap.mcs.rx_mask[0] = 0xff; + band->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + bands[band->band] = band; } wiphy = cfg_to_wiphy(cfg); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index d9bdaf9a72d0..2dc6a074e8ed 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -412,7 +412,6 @@ struct brcmf_cfg80211_info { struct work_struct escan_timeout_work; u8 *escan_ioctl_buf; struct list_head vif_list; - u8 vif_cnt; struct brcmf_cfg80211_vif_event vif_event; struct completion vif_disabled; struct brcmu_d11inf d11inf; @@ -487,8 +486,7 @@ enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, enum nl80211_iftype type, bool pm_block); -void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif); +void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); @@ -507,5 +505,6 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, bool fw_abort); void brcmf_set_mpc(struct brcmf_if *ndev, int mpc); void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg); +void brcmf_cfg80211_free_netdev(struct net_device *ndev); #endif /* _wl_cfg80211_h_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index cc87926f5055..635ae034c7e5 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -59,23 +59,18 @@ #define BRCM_2GHZ_2412_2462 REG_RULE(2412-10, 2462+10, 40, 0, 19, 0) #define BRCM_2GHZ_2467_2472 REG_RULE(2467-10, 2472+10, 20, 0, 19, \ - NL80211_RRF_PASSIVE_SCAN | \ - NL80211_RRF_NO_IBSS) + NL80211_RRF_NO_IR) #define BRCM_5GHZ_5180_5240 REG_RULE(5180-10, 5240+10, 40, 0, 21, \ - NL80211_RRF_PASSIVE_SCAN | \ - NL80211_RRF_NO_IBSS) + NL80211_RRF_NO_IR) #define BRCM_5GHZ_5260_5320 REG_RULE(5260-10, 5320+10, 40, 0, 21, \ - NL80211_RRF_PASSIVE_SCAN | \ NL80211_RRF_DFS | \ - NL80211_RRF_NO_IBSS) + NL80211_RRF_NO_IR) #define BRCM_5GHZ_5500_5700 REG_RULE(5500-10, 5700+10, 40, 0, 21, \ - NL80211_RRF_PASSIVE_SCAN | \ NL80211_RRF_DFS | \ - NL80211_RRF_NO_IBSS) + NL80211_RRF_NO_IR) #define BRCM_5GHZ_5745_5825 REG_RULE(5745-10, 5825+10, 40, 0, 21, \ - NL80211_RRF_PASSIVE_SCAN | \ - NL80211_RRF_NO_IBSS) + NL80211_RRF_NO_IR) static const struct ieee80211_regdomain brcms_regdom_x2 = { .n_reg_rules = 6, @@ -395,7 +390,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false); brcms_b_set_chanspec(wlc->hw, chanspec, - !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN), + !!(ch->flags & IEEE80211_CHAN_NO_IR), &txpwr); } @@ -657,8 +652,8 @@ static void brcms_reg_apply_radar_flags(struct wiphy *wiphy) */ if (!(ch->flags & IEEE80211_CHAN_DISABLED)) ch->flags |= IEEE80211_CHAN_RADAR | - IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN; + IEEE80211_CHAN_NO_IR | + IEEE80211_CHAN_NO_IR; } } @@ -684,18 +679,15 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - rule = freq_reg_info(wiphy, ch->center_freq); + rule = freq_reg_info(wiphy, + MHZ_TO_KHZ(ch->center_freq)); if (IS_ERR(rule)) continue; - if (!(rule->flags & NL80211_RRF_NO_IBSS)) - ch->flags &= ~IEEE80211_CHAN_NO_IBSS; - if (!(rule->flags & NL80211_RRF_PASSIVE_SCAN)) - ch->flags &= - ~IEEE80211_CHAN_PASSIVE_SCAN; + if (!(rule->flags & NL80211_RRF_NO_IR)) + ch->flags &= ~IEEE80211_CHAN_NO_IR; } else if (ch->beacon_found) { - ch->flags &= ~(IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN); + ch->flags &= ~IEEE80211_CHAN_NO_IR; } } } @@ -775,8 +767,8 @@ void brcms_c_regd_init(struct brcms_c_info *wlc) } wlc->wiphy->reg_notifier = brcms_reg_notifier; - wlc->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | - WIPHY_FLAG_STRICT_REGULATORY; + wlc->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | + REGULATORY_STRICT_REG; wiphy_apply_custom_regulatory(wlc->wiphy, regd->regdomain); brcms_reg_apply_beaconing_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER); } diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index edc5d105ff98..e71ce8c842a2 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -125,13 +125,13 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = { CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(12, 2467, - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(13, 2472, - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(14, 2484, - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | IEEE80211_CHAN_NO_OFDM) }; @@ -144,51 +144,51 @@ static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS), /* UNII-2 */ CHAN5GHZ(52, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(56, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(60, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(64, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), /* MID */ CHAN5GHZ(100, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(104, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(108, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(112, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(116, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(120, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(124, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(128, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(132, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), CHAN5GHZ(136, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS), + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), CHAN5GHZ(140, - IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS | + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS), /* UNII-3 */ CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS), diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h index 84113ea16f84..6fa5d4863782 100644 --- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h +++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h @@ -41,6 +41,7 @@ #define BCM4331_CHIP_ID 0x4331 #define BCM4334_CHIP_ID 0x4334 #define BCM4335_CHIP_ID 0x4335 +#define BCM43362_CHIP_ID 43362 #define BCM4339_CHIP_ID 0x4339 #endif /* _BRCM_HW_IDS_H_ */ diff --git a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h index 0505cc065e0d..7ca2aa1035b2 100644 --- a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h +++ b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h @@ -82,6 +82,20 @@ #define WLC_N_BW_40ALL 1 #define WLC_N_BW_20IN2G_40IN5G 2 +#define WLC_BW_20MHZ_BIT BIT(0) +#define WLC_BW_40MHZ_BIT BIT(1) +#define WLC_BW_80MHZ_BIT BIT(2) +#define WLC_BW_160MHZ_BIT BIT(3) + +/* Bandwidth capabilities */ +#define WLC_BW_CAP_20MHZ (WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_40MHZ (WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_80MHZ (WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT| \ + WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_160MHZ (WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \ + WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT) +#define WLC_BW_CAP_UNRESTRICTED 0xFF + /* band types */ #define WLC_BAND_AUTO 0 /* auto-select */ #define WLC_BAND_5G 1 /* 5 Ghz */ |