diff options
Diffstat (limited to 'drivers/net/pcmcia')
| -rw-r--r-- | drivers/net/pcmcia/3c574_cs.c | 35 | ||||
| -rw-r--r-- | drivers/net/pcmcia/3c589_cs.c | 47 | ||||
| -rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 87 | ||||
| -rw-r--r-- | drivers/net/pcmcia/com20020_cs.c | 43 | ||||
| -rw-r--r-- | drivers/net/pcmcia/fmvj18x_cs.c | 67 | ||||
| -rw-r--r-- | drivers/net/pcmcia/ibmtr_cs.c | 89 | ||||
| -rw-r--r-- | drivers/net/pcmcia/nmclan_cs.c | 42 | ||||
| -rw-r--r-- | drivers/net/pcmcia/pcnet_cs.c | 146 | ||||
| -rw-r--r-- | drivers/net/pcmcia/smc91c92_cs.c | 114 | ||||
| -rw-r--r-- | drivers/net/pcmcia/xirc2ps_cs.c | 161 |
10 files changed, 212 insertions, 619 deletions
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 042f6777e6b9..2807a0fcadc4 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -88,7 +88,6 @@ earlier 3Com products. #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -280,24 +279,14 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; return tc574_config(link); -} /* tc574_attach */ - -/* - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -*/ +} static void tc574_detach(struct pcmcia_device *link) { @@ -312,12 +301,6 @@ static void tc574_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc574_detach */ -/* - tc574_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -*/ - static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; static int tc574_config(struct pcmcia_device *link) @@ -351,7 +334,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -462,12 +445,6 @@ failed: } /* tc574_config */ -/* - After a card is removed, tc574_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -*/ - static void tc574_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -1182,9 +1159,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids); static struct pcmcia_driver tc574_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c574_cs", - }, + .name = "3c574_cs", .probe = tc574_probe, .remove = tc574_detach, .id_table = tc574_ids, diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 35562a395770..79b9ca0dbdb4 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -43,7 +43,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -178,14 +177,6 @@ static const struct ethtool_ops netdev_ethtool_ops; static void tc589_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - tc589_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static const struct net_device_ops el3_netdev_ops = { .ndo_open = el3_open, .ndo_stop = el3_close, @@ -218,9 +209,8 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -228,16 +218,7 @@ static int tc589_probe(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); return tc589_config(link); -} /* tc589_attach */ - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ +} static void tc589_detach(struct pcmcia_device *link) { @@ -252,14 +233,6 @@ static void tc589_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc589_detach */ -/*====================================================================== - - tc589_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -295,7 +268,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -353,14 +326,6 @@ failed: return -ENODEV; } /* tc589_config */ -/*====================================================================== - - After a card is removed, tc589_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void tc589_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -956,9 +921,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids); static struct pcmcia_driver tc589_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c589_cs", - }, + .name = "3c589_cs", .probe = tc589_probe, .remove = tc589_detach, .id_table = tc589_ids, diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 3f61fde70d73..d2e166e29dda 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -40,7 +40,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - axnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int axnet_probe(struct pcmcia_device *link) { axnet_dev_t *info; @@ -166,8 +157,7 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; @@ -176,15 +166,6 @@ static int axnet_probe(struct pcmcia_device *link) return axnet_config(link); } /* axnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -230,7 +211,7 @@ static int get_prom(struct pcmcia_device *link) }; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return 0; axnet_reset_8390(dev); @@ -247,14 +228,6 @@ static int get_prom(struct pcmcia_device *link) return 1; } /* get_prom */ -/*====================================================================== - - axnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -285,35 +258,16 @@ static int try_io_port(struct pcmcia_device *link) } } -static int axnet_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - int i; - cistpl_io_t *io = &cfg->io; + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->index == 0 || cfg->io.nwin == 0) + p_dev->config_index = 0x05; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) return -ENODEV; - p_dev->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -ENODEV; + return try_io_port(p_dev); } static int axnet_config(struct pcmcia_device *link) @@ -325,20 +279,19 @@ static int axnet_config(struct pcmcia_device *link) dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ - link->conf.Present = 0x63; + link->config_regs = 0x63; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; if (!link->irq) goto failed; + + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -412,14 +365,6 @@ failed: return -ENODEV; } /* axnet_config */ -/*====================================================================== - - After a card is removed, axnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void axnet_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -766,9 +711,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids); static struct pcmcia_driver axnet_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "axnet_cs", - }, + .name = "axnet_cs", .probe = axnet_probe, .remove = axnet_detach, .id_table = axnet_ids, diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index f065c35cd4b7..27bfad76fc40 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -119,14 +118,6 @@ typedef struct com20020_dev_t { struct net_device *dev; } com20020_dev_t; -/*====================================================================== - - com20020_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int com20020_probe(struct pcmcia_device *p_dev) { com20020_dev_t *info; @@ -156,8 +147,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -170,15 +160,6 @@ fail_alloc_info: return -ENOMEM; } /* com20020_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void com20020_detach(struct pcmcia_device *link) { struct com20020_dev_t *info = link->priv; @@ -217,14 +198,6 @@ static void com20020_detach(struct pcmcia_device *link) } /* com20020_detach */ -/*====================================================================== - - com20020_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int com20020_config(struct pcmcia_device *link) { struct arcnet_local *lp; @@ -278,7 +251,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -312,14 +285,6 @@ failed: return -ENODEV; } /* com20020_config */ -/*====================================================================== - - After a card is removed, com20020_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void com20020_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "com20020_release\n"); @@ -362,9 +327,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids); static struct pcmcia_driver com20020_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "com20020_cs", - }, + .name = "com20020_cs", .probe = com20020_probe, .remove = com20020_detach, .id_table = com20020_ids, diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 8f26d548d1bb..9226cda4d054 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -51,7 +51,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -254,8 +253,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -315,7 +313,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ - link->conf.ConfigIndex = + link->config_index = ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } @@ -323,11 +321,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } -static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { return 0; /* strange, but that's what the code did already before... */ } @@ -364,28 +358,28 @@ static int fmvj18x_config(struct pcmcia_device *link) link->card_id == PRODID_TDK_NP9610 || link->card_id == PRODID_TDK_MN3200) { /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->conf.ConfigBase == 0x0fe0) + if (link->config_base == 0x0fe0) cardtype = MBH10302; else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), @@ -405,10 +399,10 @@ static int fmvj18x_config(struct pcmcia_device *link) case MANFID_FUJITSU: if (link->card_id == PRODID_FUJITSU_MBH10304) { cardtype = XXX10304; /* MBH10304 with buggy CIS */ - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; } else { cardtype = MBH10302; /* NextCom NC5310, etc. */ - link->conf.ConfigIndex = 1; + link->config_index = 1; } break; case MANFID_UNGERMANN: @@ -416,7 +410,7 @@ static int fmvj18x_config(struct pcmcia_device *link) break; default: cardtype = MBH10302; - link->conf.ConfigIndex = 1; + link->config_index = 1; } } @@ -434,7 +428,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -545,20 +539,18 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { - win_req_t req; u_char __iomem *base; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -1; - base = ioremap(req.Base, req.Size); - pcmcia_map_mem_page(link, link->win, 0); + base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); + pcmcia_map_mem_page(link, link->resource[2], 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -583,7 +575,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) } iounmap(base); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i != 0x200) ? 0 : -1; } /* fmvj18x_get_hwinfo */ @@ -591,27 +583,26 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { - win_req_t req; int i; struct net_device *dev = link->priv; unsigned int ioaddr; local_info_t *lp = netdev_priv(dev); /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[3]->start = link->resource[3]->end = 0; + i = pcmcia_request_window(link, link->resource[3], 0); if (i != 0) return -1; - lp->base = ioremap(req.Base, req.Size); + lp->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); if (lp->base == NULL) { netdev_notice(dev, "ioremap failed\n"); return -1; } - i = pcmcia_map_mem_page(link, link->win, 0); + i = pcmcia_map_mem_page(link, link->resource[3], 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; @@ -639,7 +630,6 @@ static void fmvj18x_release(struct pcmcia_device *link) struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); u_char __iomem *tmp; - int j; dev_dbg(&link->dev, "fmvj18x_release\n"); @@ -647,7 +637,6 @@ static void fmvj18x_release(struct pcmcia_device *link) tmp = lp->base; lp->base = NULL; /* set NULL before iounmap */ iounmap(tmp); - j = pcmcia_release_window(link, link->win); } pcmcia_disable_device(link); @@ -709,9 +698,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); static struct pcmcia_driver fmvj18x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fmvj18x_cs", - }, + .name = "fmvj18x_cs", .probe = fmvj18x_probe, .remove = fmvj18x_detach, .id_table = fmvj18x_ids, diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index dc85282193bf..15d57f5b6f29 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -58,7 +58,6 @@ #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -103,9 +102,8 @@ static void ibmtr_detach(struct pcmcia_device *p_dev); typedef struct ibmtr_dev_t { struct pcmcia_device *p_dev; - struct net_device *dev; - window_handle_t sram_win_handle; - struct tok_info *ti; + struct net_device *dev; + struct tok_info *ti; } ibmtr_dev_t; static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { @@ -114,14 +112,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { return tok_interrupt(irq, dev); }; -/*====================================================================== - - ibmtr_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int __devinit ibmtr_attach(struct pcmcia_device *link) { ibmtr_dev_t *info; @@ -144,24 +134,14 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_regs = PRESENT_OPTION; info->dev = dev; return ibmtr_config(link); } /* ibmtr_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ibmtr_detach(struct pcmcia_device *link) { struct ibmtr_dev_t *info = link->priv; @@ -186,26 +166,17 @@ static void ibmtr_detach(struct pcmcia_device *link) kfree(info); } /* ibmtr_detach */ -/*====================================================================== - - ibmtr_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - token-ring device available to the system. - -======================================================================*/ - static int __devinit ibmtr_config(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); - win_req_t req; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); - link->conf.ConfigIndex = 0x61; link->io_lines = 16; + link->config_index = 0x61; /* Determine if this is PRIMARY or ALTERNATE. */ @@ -229,39 +200,39 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); /* Allocate the MMIO memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x2000; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[2]->flags |= WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x2000; + ret = pcmcia_request_window(link, link->resource[2], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, mmiobase); + ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); if (ret) goto failed; - ti->mmio = ioremap(req.Base, req.Size); + ti->mmio = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /* Allocate the SRAM memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = sramsize * 1024; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &info->sram_win_handle); + link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; + link->resource[3]->end = sramsize * 1024; + ret = pcmcia_request_window(link, link->resource[3], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); + ret = pcmcia_map_mem_page(link, link->resource[3], srambase); if (ret) goto failed; ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(req.Base, req.Size); - ti->sram_phys = req.Base; + ti->sram_virt = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); + ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -289,14 +260,6 @@ failed: return -ENODEV; } /* ibmtr_config */ -/*====================================================================== - - After a card is removed, ibmtr_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ibmtr_release(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; @@ -304,7 +267,7 @@ static void ibmtr_release(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct tok_info *ti = netdev_priv(dev); iounmap(ti->mmio); } @@ -386,9 +349,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); static struct pcmcia_driver ibmtr_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ibmtr_cs", - }, + .name = "ibmtr_cs", .probe = ibmtr_attach, .remove = ibmtr_detach, .id_table = ibmtr_ids, diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index c1d8ce9e4a6c..0a2b0f9cdf33 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -148,7 +148,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -437,13 +436,6 @@ static const struct net_device_ops mace_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* ---------------------------------------------------------------------------- -nmclan_attach - Creates an "instance" of the driver, allocating local data - structures for one device. The device is registered with Card - Services. ----------------------------------------------------------------------------- */ - static int nmclan_probe(struct pcmcia_device *link) { mace_private *lp; @@ -462,10 +454,9 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; lp->tx_free_frames=AM2150_MAX_TX_FRAMES; @@ -476,14 +467,6 @@ static int nmclan_probe(struct pcmcia_device *link) return nmclan_config(link); } /* nmclan_attach */ -/* ---------------------------------------------------------------------------- -nmclan_detach - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. ----------------------------------------------------------------------------- */ - static void nmclan_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -627,13 +610,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) return 0; } /* mace_init */ -/* ---------------------------------------------------------------------------- -nmclan_config - This routine is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. ----------------------------------------------------------------------------- */ - static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -652,7 +628,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -712,12 +688,6 @@ failed: return -ENODEV; } /* nmclan_config */ -/* ---------------------------------------------------------------------------- -nmclan_release - After a card is removed, nmclan_release() will unregister the - net device, and release the PCMCIA configuration. If the device - is still open, this will be postponed until it is closed. ----------------------------------------------------------------------------- */ static void nmclan_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "nmclan_release\n"); @@ -1533,9 +1503,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); static struct pcmcia_driver nmclan_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nmclan_cs", - }, + .name = "nmclan_cs", .probe = nmclan_probe, .remove = nmclan_detach, .id_table = nmclan_ids, diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c94311aed1ab..03096c80103d 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -43,7 +43,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -238,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = { #endif }; -/*====================================================================== - - pcnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int pcnet_probe(struct pcmcia_device *link) { pcnet_dev_t *info; @@ -260,23 +251,13 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; return pcnet_config(link); } /* pcnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -300,22 +281,22 @@ static void pcnet_detach(struct pcmcia_device *link) static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; - win_req_t req; u_char __iomem *base, *virt; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return NULL; - virt = ioremap(req.Base, req.Size); + virt = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); for (i = 0; i < NR_INFO; i++) { - pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); - base = &virt[hw_info[i].offset & (req.Size-1)]; + pcmcia_map_mem_page(link, link->resource[2], + hw_info[i].offset & ~(resource_size(link->resource[2])-1)); + base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && (readb(base+4) == hw_info[i].a2)) { @@ -326,7 +307,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) } iounmap(virt); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ @@ -421,7 +402,7 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) int i, j; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ @@ -461,14 +442,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) return &default_info; } /* get_hwired */ -/*====================================================================== - - pcnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -500,43 +473,22 @@ static int try_io_port(struct pcmcia_device *link) } } -static int pcnet_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { int *priv = priv_data; int try = (*priv & 0x1); - int i; - cistpl_io_t *io = &cfg->io; - if (cfg->index == 0 || cfg->io.nwin == 0) - return -EINVAL; + *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } + if (p_dev->config_index == 0) + return -EINVAL; - *priv &= ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) + return -EINVAL; - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - if (!try) - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - else + if (try) p_dev->io_lines = 16; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -EINVAL; + return try_io_port(p_dev); } static hw_info_t *pcnet_try_config(struct pcmcia_device *link, @@ -558,15 +510,14 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, if (!link->irq) return NULL; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; + if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; + link->config_index |= 0x10; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) return NULL; @@ -581,7 +532,7 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, } else dev->if_port = 0; - if ((link->conf.ConfigBase == 0x03c0) && + if ((link->config_base == 0x03c0) && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { dev_info(&link->dev, "this is an AX88190 card - use axnet_cs instead.\n"); @@ -685,14 +636,6 @@ failed: return -ENODEV; } /* pcnet_config */ -/*====================================================================== - - After a card is removed, pcnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void pcnet_release(struct pcmcia_device *link) { pcnet_dev_t *info = PRIV(link->priv); @@ -705,15 +648,6 @@ static void pcnet_release(struct pcmcia_device *link) pcmcia_disable_device(link); } -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the net drivers from trying - to talk to the card any more. - -======================================================================*/ - static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1466,7 +1400,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - win_req_t req; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1477,22 +1410,22 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, window_size = roundup_pow_of_two(window_size); /* Allocate a memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; req.Size = window_size; - req.AccessSpeed = mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; link->resource[3]->end = window_size; + ret = pcmcia_request_window(link, link->resource[3], mem_speed); if (ret) goto failed; offset = (start_pg << 8) + cm_offset; offset -= offset % window_size; - ret = pcmcia_map_mem_page(link, link->win, offset); + ret = pcmcia_map_mem_page(link, link->resource[3], offset); if (ret) goto failed; /* Try scribbling on the buffer */ - info->base = ioremap(req.Base, window_size); + info->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); for (i = 0; i < (TX_PAGES<<8); i += 2) __raw_writew((i>>1), info->base+offset+i); udelay(100); @@ -1501,19 +1434,20 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, pcnet_reset_8390(dev); if (i != (TX_PAGES<<8)) { iounmap(info->base); - pcmcia_release_window(link, link->win); - info->base = NULL; link->win = 0; + pcmcia_release_window(link, link->resource[3]); + info->base = NULL; goto failed; } ei_status.mem = info->base + offset; - ei_status.priv = req.Size; + ei_status.priv = resource_size(link->resource[3]); dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = dev->mem_start + req.Size; + dev->mem_end = dev->mem_start + resource_size(link->resource[3]); ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); + ei_status.stop_page = start_pg + ( + (resource_size(link->resource[3]) - offset) >> 8); /* set up block i/o functions */ ei_status.get_8390_hdr = shmem_get_8390_hdr; @@ -1752,9 +1686,7 @@ MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { - .drv = { - .name = "pcnet_cs", - }, + .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 7204a4b5529b..8a9ff5318923 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -46,7 +46,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -302,14 +301,6 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - smc91c92_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int smc91c92_probe(struct pcmcia_device *link) { struct smc_private *smc; @@ -326,10 +317,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -345,15 +332,6 @@ static int smc91c92_probe(struct pcmcia_device *link) return smc91c92_config(link); } /* smc91c92_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void smc91c92_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -414,26 +392,28 @@ static int mhz_3288_power(struct pcmcia_device *link) mdelay(200); /* Now read and write the COR... */ - tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR); + tmp = readb(smc->base + link->config_base + CISREG_COR); udelay(5); - writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR); + writeb(tmp, smc->base + link->config_base + CISREG_COR); return 0; } -static int mhz_mfc_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->io_lines = 16; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[1]->end = 8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; p_dev->resource[0]->start = k ^ 0x300; - p_dev->io_lines = 16; if (!pcmcia_request_io(p_dev)) return 0; } @@ -444,14 +424,11 @@ static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); - win_req_t req; unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->end = 8; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | + CONF_AUTO_SET_IO; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -461,16 +438,16 @@ static int mhz_mfc_config(struct pcmcia_device *link) dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -ENODEV; - smc->base = ioremap(req.Base, req.Size); - offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; - i = pcmcia_map_mem_page(link, link->win, offset); + smc->base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); + offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; + i = pcmcia_map_mem_page(link, link->resource[2], offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) @@ -593,14 +570,12 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ -static int smc_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -609,7 +584,8 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->resource[0]->end = 16; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -642,15 +618,14 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ - link->conf.ConfigIndex = 0x23; link->io_lines = 16; + link->config_index = 0x23; for (i = j = 0; j < 4; j++) { link->resource[1]->start = com[j]; @@ -660,7 +635,7 @@ static int osi_config(struct pcmcia_device *link) } if (i != 0) { /* Fallback: turn off hard decode */ - link->conf.ConfigIndex = 0x03; + link->config_index = 0x03; link->resource[1]->end = 0; i = pcmcia_request_io(link); } @@ -819,27 +794,16 @@ static int check_sig(struct pcmcia_device *link) } if (width) { - modconf_t mod = { - .Attributes = CONF_IO_CHANGE_WIDTH, - }; pr_info("using 8-bit IO window\n"); smc91c92_suspend(link); - pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_iowidth(link); smc91c92_resume(link); return check_sig(link); } return -ENODEV; } -/*====================================================================== - - smc91c92_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int smc91c92_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -871,7 +835,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; @@ -988,18 +952,10 @@ config_failed: return -ENODEV; } /* smc91c92_config */ -/*====================================================================== - - After a card is removed, smc91c92_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void smc91c92_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "smc91c92_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); iounmap(smc->base); @@ -2092,9 +2048,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); static struct pcmcia_driver smc91c92_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "smc91c92_cs", - }, + .name = "smc91c92_cs", .probe = smc91c92_probe, .remove = smc91c92_detach, .id_table = smc91c92_ids, diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index d858b5e4c4a7..a46b7fd6c0f5 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -84,7 +84,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -262,33 +261,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len); -/* - * The event() function is this driver's Card Services event handler. - * It will be called by Card Services when an appropriate card status - * event is received. The config() and release() entry points are - * used to configure or release a socket, in response to card insertion - * and ejection events. They are invoked from the event handler. - */ - static int has_ce2_string(struct pcmcia_device * link); static int xirc2ps_config(struct pcmcia_device * link); static void xirc2ps_release(struct pcmcia_device * link); - -/**************** - * The attach() and detach() entry points are used to create and destroy - * "instances" of the driver, where each instance represents everything - * needed to manage one actual PCMCIA card. - */ - static void xirc2ps_detach(struct pcmcia_device *p_dev); -/**************** - * You'll also need to prototype all the functions that will actually - * be used to talk to your device. See 'pcmem_cs' for a good example - * of a fully self-sufficient driver; the other drivers rely more or - * less on other parts of the kernel. - */ - static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); typedef struct local_info_t { @@ -496,16 +473,6 @@ static const struct net_device_ops netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/**************** - * xirc2ps_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ - static int xirc2ps_probe(struct pcmcia_device *link) { @@ -524,9 +491,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_index = 1; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -537,13 +502,6 @@ xirc2ps_probe(struct pcmcia_device *link) return xirc2ps_config(link); } /* xirc2ps_attach */ -/**************** - * This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void xirc2ps_detach(struct pcmcia_device *link) { @@ -661,44 +619,53 @@ has_ce2_string(struct pcmcia_device * p_dev) } static int -xirc2ps_config_modem(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) { unsigned int ioaddr; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = ioaddr; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } static int -xirc2ps_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) { int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = p_dev->resource[1]->start - + (*pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); } @@ -721,11 +688,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, }; -/**************** - * xirc2ps_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * ethernet device available to the system. - */ static int xirc2ps_config(struct pcmcia_device * link) { @@ -801,32 +763,24 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->io_lines = 10; if (local->modem) { int pass; + link->config_flags |= CONF_AUTO_SET_IO; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status |= CCSR_AUDIO_ENA; - } - link->resource[1]->end = 8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ for (pass=0; pass < 2; pass++) - if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) + if (!pcmcia_loop_config(link, xirc2ps_config_check, + &pass)) goto port_found; /* if special option: * try to configure as Ethernet only. @@ -834,7 +788,9 @@ xirc2ps_config(struct pcmcia_device * link) } pr_notice("no ports available\n"); } else { + link->io_lines = 10; link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->resource[0]->start = ioaddr; if (!(err = pcmcia_request_io(link))) @@ -855,16 +811,14 @@ xirc2ps_config(struct pcmcia_device * link) if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; - /**************** - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { - win_req_t req; - /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, * the base address of the ethernet port (BasePort1) is written @@ -884,14 +838,14 @@ xirc2ps_config(struct pcmcia_device * link) * is at 0x0800. So we allocate a window into the attribute * memory and write direct to the CIS registers */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - if ((err = pcmcia_request_window(link, &req, &link->win))) + link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + if ((err = pcmcia_request_window(link, link->resource[2], 0))) goto config_error; - local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - if ((err = pcmcia_map_mem_page(link, link->win, 0))) + local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; + if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet @@ -972,17 +926,12 @@ xirc2ps_config(struct pcmcia_device * link) return -ENODEV; } /* xirc2ps_config */ -/**************** - * After a card is removed, xirc2ps_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void xirc2ps_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); if (local->dingo) @@ -1818,9 +1767,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); static struct pcmcia_driver xirc2ps_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "xirc2ps_cs", - }, + .name = "xirc2ps_cs", .probe = xirc2ps_probe, .remove = xirc2ps_detach, .id_table = xirc2ps_ids, |
