diff options
Diffstat (limited to 'drivers/net/ethernet')
47 files changed, 2269 insertions, 292 deletions
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 9cc15701101b..1f78b63d5efe 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -261,7 +261,6 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter) if ((phy_data & BMSR_LSTATUS) == 0) { /* link down */ netif_carrier_off(netdev); - netif_stop_queue(netdev); hw->hibernate = true; if (atl1c_reset_mac(hw) != 0) if (netif_msg_hw(adapter)) diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 46b8b7d81633..d09c6b583d17 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -656,7 +656,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); - skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); + skb = alloc_skb(RX_PKT_BUF_SZ, GFP_ATOMIC | GFP_DMA); if (skb == NULL) return -ENOMEM; mapping = dma_map_single(bp->sdev->dma_dev, skb->data, @@ -967,7 +967,7 @@ static netdev_tx_t b44_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_unmap_single(bp->sdev->dma_dev, mapping, len, DMA_TO_DEVICE); - bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA); + bounce_skb = alloc_skb(len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) goto err_out; diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index ac7b74488531..1fa4927a45b1 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -5372,7 +5372,7 @@ bnx2_free_tx_skbs(struct bnx2 *bp) int k, last; if (skb == NULL) { - j++; + j = NEXT_TX_BD(j); continue; } @@ -5384,8 +5384,8 @@ bnx2_free_tx_skbs(struct bnx2 *bp) tx_buf->skb = NULL; last = tx_buf->nr_frags; - j++; - for (k = 0; k < last; k++, j++) { + j = NEXT_TX_BD(j); + for (k = 0; k < last; k++, j = NEXT_TX_BD(j)) { tx_buf = &txr->tx_buf_ring[TX_RING_IDX(j)]; dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(tx_buf, mapping), diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index e30e2a2f354c..7de824184979 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -747,21 +747,6 @@ struct bnx2x_fastpath { #define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG -#define BNX2X_IP_CSUM_ERR(cqe) \ - (!((cqe)->fast_path_cqe.status_flags & \ - ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \ - ((cqe)->fast_path_cqe.type_error_flags & \ - ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG)) - -#define BNX2X_L4_CSUM_ERR(cqe) \ - (!((cqe)->fast_path_cqe.status_flags & \ - ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \ - ((cqe)->fast_path_cqe.type_error_flags & \ - ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) - -#define BNX2X_RX_CSUM_OK(cqe) \ - (!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe))) - #define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \ (((le16_to_cpu(flags) & \ PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index ad0743bf4bde..8098eea9704d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -190,7 +190,7 @@ int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata) if ((netif_tx_queue_stopped(txq)) && (bp->state == BNX2X_STATE_OPEN) && - (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)) + (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)) netif_tx_wake_queue(txq); __netif_tx_unlock(txq); @@ -617,6 +617,25 @@ static int bnx2x_alloc_rx_data(struct bnx2x *bp, return 0; } +static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe, + struct bnx2x_fastpath *fp) +{ + /* Do nothing if no IP/L4 csum validation was done */ + + if (cqe->fast_path_cqe.status_flags & + (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | + ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) + return; + + /* If both IP/L4 validation were done, check if an error was found. */ + + if (cqe->fast_path_cqe.type_error_flags & + (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | + ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) + fp->eth_q_stats.hw_csum_err++; + else + skb->ip_summed = CHECKSUM_UNNECESSARY; +} int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget) { @@ -806,13 +825,9 @@ reuse_rx: skb_checksum_none_assert(skb); - if (bp->dev->features & NETIF_F_RXCSUM) { + if (bp->dev->features & NETIF_F_RXCSUM) + bnx2x_csum_validate(skb, cqe, fp); - if (likely(BNX2X_RX_CSUM_OK(cqe))) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - fp->eth_q_stats.hw_csum_err++; - } skb_record_rx_queue(skb, fp->rx_queue); @@ -2501,8 +2516,6 @@ int bnx2x_poll(struct napi_struct *napi, int budget) /* we split the first BD into headers and data BDs * to ease the pain of our fellow microcode engineers * we use one mapping for both BDs - * So far this has only been observed to happen - * in Other Operating Systems(TM) */ static noinline u16 bnx2x_tx_split(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, @@ -3156,7 +3169,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) txdata->tx_bd_prod += nbd; - if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) { + if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) { netif_tx_stop_queue(txq); /* paired memory barrier is in bnx2x_tx_int(), we have to keep @@ -3165,7 +3178,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) smp_mb(); fp->eth_q_stats.driver_xoff++; - if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3) + if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4) netif_tx_wake_queue(txq); } txdata->tx_pkt++; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index a3fb7215cd89..6e7d5c0843b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -40,6 +40,7 @@ #define I2C_BSC0 0 #define I2C_BSC1 1 #define I2C_WA_RETRY_CNT 3 +#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1) #define MCPR_IMC_COMMAND_READ_OP 1 #define MCPR_IMC_COMMAND_WRITE_OP 2 @@ -7659,6 +7660,28 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } +static void bnx2x_warpcore_power_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + u32 pin_cfg; + struct bnx2x *bp = params->bp; + + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_PWR_DIS_MASK) >> + PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", + power, pin_cfg); + /* Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); +} static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, @@ -7678,6 +7701,12 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* 4 byte aligned address */ addr32 = addr & (~0x3); do { + if (cnt == I2C_WA_PWR_ITER) { + bnx2x_warpcore_power_module(params, phy, 0); + /* Note that 100us are not enough here */ + usleep_range(1000,1000); + bnx2x_warpcore_power_module(params, phy, 1); + } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -8200,29 +8229,6 @@ static void bnx2x_set_sfp_module_fault_led(struct link_params *params, bnx2x_set_e1e2_module_fault_led(params, gpio_mode); } -static void bnx2x_warpcore_power_module(struct link_params *params, - struct bnx2x_phy *phy, - u8 power) -{ - u32 pin_cfg; - struct bnx2x *bp = params->bp; - - pin_cfg = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_PWR_DIS_MASK) >> - PORT_HW_CFG_E3_PWR_DIS_SHIFT; - - if (pin_cfg == PIN_CFG_NA) - return; - DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", - power, pin_cfg); - /* Low ==> corresponding SFP+ module is powered - * high ==> the SFP+ module is powered down - */ - bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); -} - static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -9748,7 +9754,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, msleep(1); - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index c95e7b5e2b85..2c89d17cbb29 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -534,7 +534,8 @@ int cnic_unregister_driver(int ulp_type) } if (atomic_read(&ulp_ops->ref_count) != 0) - netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n"); + pr_warn("%s: Failed waiting for ref count to go to zero\n", + __func__); return 0; out_unlock: @@ -1053,12 +1054,13 @@ static int cnic_init_uio(struct cnic_dev *dev) uinfo = &udev->cnic_uinfo; - uinfo->mem[0].addr = dev->netdev->base_addr; + uinfo->mem[0].addr = pci_resource_start(dev->pcidev, 0); uinfo->mem[0].internal_addr = dev->regview; - uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start; uinfo->mem[0].memtype = UIO_MEM_PHYS; if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) { + uinfo->mem[0].size = MB_GET_CID_ADDR(TX_TSS_CID + + TX_MAX_TSS_RINGS + 1); uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen & PAGE_MASK; if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) @@ -1068,6 +1070,8 @@ static int cnic_init_uio(struct cnic_dev *dev) uinfo->name = "bnx2_cnic"; } else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) { + uinfo->mem[0].size = pci_resource_len(dev->pcidev, 0); + uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk & PAGE_MASK; uinfo->mem[1].size = sizeof(*cp->bnx2x_def_status_blk); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index edeeb516807a..e47ff8be1d7b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14275,7 +14275,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } } - if (tg3_flag(tp, 5755_PLUS)) + if (tg3_flag(tp, 5755_PLUS) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) tg3_flag_set(tp, SHORT_DMA_BUG); if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 8d06ea381741..921c2082af4c 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -122,15 +122,15 @@ static int be_mcc_compl_process(struct be_adapter *adapter, goto done; if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) { - dev_warn(&adapter->pdev->dev, "This domain(VM) is not " - "permitted to execute this cmd (opcode %d)\n", - opcode); + dev_warn(&adapter->pdev->dev, + "opcode %d-%d is not permitted\n", + opcode, subsystem); } else { extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & CQE_STATUS_EXTD_MASK; - dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:" - "status %d, extd-status %d\n", - opcode, compl_status, extd_status); + dev_err(&adapter->pdev->dev, + "opcode %d-%d failed:status %d-%d\n", + opcode, subsystem, compl_status, extd_status); } } done: diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 9625bf420c16..b3f3fc3d1323 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1566,7 +1566,7 @@ struct be_hw_stats_v1 { u32 rsvd0[BE_TXP_SW_SZ]; struct be_erx_stats_v1 erx; struct be_pmem_stats pmem; - u32 rsvd1[3]; + u32 rsvd1[18]; }; struct be_cmd_req_get_stats_v1 { diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 08efd308d78a..501dfa9c88ec 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -736,6 +736,8 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb); if (copied) { + int gso_segs = skb_shinfo(skb)->gso_segs; + /* record the sent skb in the sent_skb table */ BUG_ON(txo->sent_skb_list[start]); txo->sent_skb_list[start] = skb; @@ -753,8 +755,7 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, be_txq_notify(adapter, txq->id, wrb_cnt); - be_tx_stats_update(txo, wrb_cnt, copied, - skb_shinfo(skb)->gso_segs, stopped); + be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped); } else { txq->head = start; dev_kfree_skb_any(skb); @@ -3236,7 +3237,7 @@ static void be_netdev_init(struct net_device *netdev) netdev->flags |= IFF_MULTICAST; - netif_set_gso_max_size(netdev, 65535); + netif_set_gso_max_size(netdev, 65535 - ETH_HLEN); netdev->netdev_ops = &be_netdev_ops; diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 0741aded9eb0..ab1d80ff0791 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1804,18 +1804,16 @@ void gfar_configure_coalescing(struct gfar_private *priv, if (priv->mode == MQ_MG_MODE) { baddr = ®s->txic0; for_each_set_bit(i, &tx_mask, priv->num_tx_queues) { - if (likely(priv->tx_queue[i]->txcoalescing)) { - gfar_write(baddr + i, 0); + gfar_write(baddr + i, 0); + if (likely(priv->tx_queue[i]->txcoalescing)) gfar_write(baddr + i, priv->tx_queue[i]->txic); - } } baddr = ®s->rxic0; for_each_set_bit(i, &rx_mask, priv->num_rx_queues) { - if (likely(priv->rx_queue[i]->rxcoalescing)) { - gfar_write(baddr + i, 0); + gfar_write(baddr + i, 0); + if (likely(priv->rx_queue[i]->rxcoalescing)) gfar_write(baddr + i, priv->rx_queue[i]->rxic); - } } } } @@ -2065,10 +2063,9 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } - /* Steal sock reference for processing TX time stamps */ - swap(skb_new->sk, skb->sk); - swap(skb_new->destructor, skb->destructor); - kfree_skb(skb); + if (skb->sk) + skb_set_owner_w(skb_new, skb->sk); + consume_skb(skb); skb = skb_new; } diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 79b07ec6726f..0cafe4fe9406 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -122,8 +122,10 @@ config IGB_DCA config IGB_PTP bool "PTP Hardware Clock (PHC)" - default y - depends on IGB && PTP_1588_CLOCK + default n + depends on IGB && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want to use PTP Hardware Clock (PHC) in the driver. Only the basic clock operations have been implemented. @@ -223,7 +225,9 @@ config IXGBE_DCB config IXGBE_PTP bool "PTP Clock Support" default n - depends on IXGBE && PTP_1588_CLOCK + depends on IXGBE && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want support for 1588 Timestamping with a PHC device, using the PTP 1588 Clock support. This is diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 36db4df09aed..1f063dcd8f85 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1572,6 +1572,9 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ctrl = er32(CTRL); status = er32(STATUS); rxcw = er32(RXCW); + /* SYNCH bit and IV bit are sticky */ + udelay(10); + rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 351a4097b2ba..76edbc1be33b 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -103,6 +103,7 @@ #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ #define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ #define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index d863075df7a4..905e2147d918 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -258,7 +258,8 @@ static int e1000_set_settings(struct net_device *netdev, * When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ - if (hw->phy.ops.check_reset_block(hw)) { + if (hw->phy.ops.check_reset_block && + hw->phy.ops.check_reset_block(hw)) { e_err("Cannot change link characteristics when SoL/IDER is active.\n"); return -EINVAL; } @@ -1615,7 +1616,8 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) * PHY loopback cannot be performed if SoL/IDER * sessions are active */ - if (hw->phy.ops.check_reset_block(hw)) { + if (hw->phy.ops.check_reset_block && + hw->phy.ops.check_reset_block(hw)) { e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 238ab2f8a5e7..e3a7b07df629 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -325,24 +325,46 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) **/ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { - u16 phy_reg; - u32 phy_id; + u16 phy_reg = 0; + u32 phy_id = 0; + s32 ret_val; + u16 retry_count; + + for (retry_count = 0; retry_count < 2; retry_count++) { + ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + if (ret_val || (phy_reg == 0xFFFF)) + continue; + phy_id = (u32)(phy_reg << 16); - e1e_rphy_locked(hw, PHY_ID1, &phy_reg); - phy_id = (u32)(phy_reg << 16); - e1e_rphy_locked(hw, PHY_ID2, &phy_reg); - phy_id |= (u32)(phy_reg & PHY_REVISION_MASK); + ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + if (ret_val || (phy_reg == 0xFFFF)) { + phy_id = 0; + continue; + } + phy_id |= (u32)(phy_reg & PHY_REVISION_MASK); + break; + } if (hw->phy.id) { if (hw->phy.id == phy_id) return true; - } else { - if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK)) - hw->phy.id = phy_id; + } else if (phy_id) { + hw->phy.id = phy_id; + hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); return true; } - return false; + /* + * In case the PHY needs to be in mdio slow mode, + * set slow mode and try to get the PHY id again. + */ + hw->phy.ops.release(hw); + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (!ret_val) + ret_val = e1000e_get_phy_id(hw); + hw->phy.ops.acquire(hw); + + return !ret_val; } /** diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 026e8b3ab52e..a13439928488 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -709,7 +709,7 @@ s32 e1000e_setup_link_generic(struct e1000_hw *hw) * In the case of the phy reset being blocked, we already have a link. * We do not need to set it up again. */ - if (hw->phy.ops.check_reset_block(hw)) + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) return 0; /* diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a4b0435b00dc..623e30b9964d 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -496,7 +496,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, * @sk_buff: socket buffer with received data **/ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, - __le16 csum, struct sk_buff *skb) + struct sk_buff *skb) { u16 status = (u16)status_err; u8 errors = (u8)(status_err >> 24); @@ -511,8 +511,8 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, if (status & E1000_RXD_STAT_IXSM) return; - /* TCP/UDP checksum error bit is set */ - if (errors & E1000_RXD_ERR_TCPE) { + /* TCP/UDP checksum error bit or IP checksum error bit is set */ + if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) { /* let the stack verify checksum errors */ adapter->hw_csum_err++; return; @@ -523,19 +523,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, return; /* It must be a TCP or UDP packet with a valid checksum */ - if (status & E1000_RXD_STAT_TCPCS) { - /* TCP checksum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - /* - * IP fragment with UDP payload - * Hardware complements the payload checksum, so we undo it - * and then put the value in host order for further stack use. - */ - __sum16 sum = (__force __sum16)swab16((__force u16)csum); - skb->csum = csum_unfold(~sum); - skb->ip_summed = CHECKSUM_COMPLETE; - } + skb->ip_summed = CHECKSUM_UNNECESSARY; adapter->hw_csum_good++; } @@ -954,8 +942,7 @@ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, skb_put(skb, length); /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); @@ -1341,8 +1328,7 @@ copydone: total_rx_bytes += skb->len; total_rx_packets++; - e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); @@ -1512,9 +1498,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, } } - /* Receive Checksum Offload XXX recompute due to CRC strip? */ - e1000_rx_checksum(adapter, staterr, - rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + /* Receive Checksum Offload */ + e1000_rx_checksum(adapter, staterr, skb); e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); @@ -3098,19 +3083,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); - if (adapter->netdev->features & NETIF_F_RXCSUM) { + if (adapter->netdev->features & NETIF_F_RXCSUM) rxcsum |= E1000_RXCSUM_TUOFL; - - /* - * IPv4 payload checksum for UDP fragments must be - * used in conjunction with packet-split. - */ - if (adapter->rx_ps_pages) - rxcsum |= E1000_RXCSUM_IPPCSE; - } else { + else rxcsum &= ~E1000_RXCSUM_TUOFL; - /* no need to clear IPPCSE as it defaults to 0 */ - } ew32(RXCSUM, rxcsum); if (adapter->hw.mac.type == e1000_pch2lan) { @@ -5241,22 +5217,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ - if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { - if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { - e_err("Jumbo Frames not supported.\n"); - return -EINVAL; - } - - /* - * IP payload checksum (enabled with jumbos/packet-split when - * Rx checksum is enabled) and generation of RSS hash is - * mutually exclusive in the hardware. - */ - if ((netdev->features & NETIF_F_RXCSUM) && - (netdev->features & NETIF_F_RXHASH)) { - e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n"); - return -EINVAL; - } + if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && + !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { + e_err("Jumbo Frames not supported.\n"); + return -EINVAL; } /* Supported frame sizes */ @@ -6030,17 +5994,6 @@ static int e1000_set_features(struct net_device *netdev, NETIF_F_RXALL))) return 0; - /* - * IP payload checksum (enabled with jumbos/packet-split when Rx - * checksum is enabled) and generation of RSS hash is mutually - * exclusive in the hardware. - */ - if (adapter->rx_ps_pages && - (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) { - e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n"); - return -EINVAL; - } - if (changed & NETIF_F_RXFCS) { if (features & NETIF_F_RXFCS) { adapter->flags2 &= ~FLAG2_CRC_STRIPPING; @@ -6237,7 +6190,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.ms_type = e1000_ms_hw_default; } - if (hw->phy.ops.check_reset_block(hw)) + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) e_info("PHY reset is blocked due to SOL/IDER session.\n"); /* Set initial default active device features */ @@ -6404,7 +6357,7 @@ err_register: if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_release_hw_control(adapter); err_eeprom: - if (!hw->phy.ops.check_reset_block(hw)) + if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw)) e1000_phy_hw_reset(&adapter->hw); err_hw_init: kfree(adapter->tx_ring); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 0334d013bc3c..b860d4f7ea2a 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2155,9 +2155,11 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) s32 ret_val; u32 ctrl; - ret_val = phy->ops.check_reset_block(hw); - if (ret_val) - return 0; + if (phy->ops.check_reset_block) { + ret_val = phy->ops.check_reset_block(hw); + if (ret_val) + return 0; + } ret_val = phy->ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index e65083958421..5e84eaac48c1 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -206,8 +206,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->rar_entry_count = E1000_RAR_ENTRIES_82580; break; case e1000_i350: - case e1000_i210: - case e1000_i211: mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: diff --git a/drivers/net/ethernet/intel/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c index 8ce67064b9c5..90eef07943f4 100644 --- a/drivers/net/ethernet/intel/igbvf/ethtool.c +++ b/drivers/net/ethernet/intel/igbvf/ethtool.c @@ -357,21 +357,28 @@ static int igbvf_set_coalesce(struct net_device *netdev, struct igbvf_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) || - ((ec->rx_coalesce_usecs > 3) && - (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) || - (ec->rx_coalesce_usecs == 2)) - return -EINVAL; - - /* convert to rate of irq's per second */ - if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) { + if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) && + (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) { + adapter->current_itr = ec->rx_coalesce_usecs << 2; + adapter->requested_itr = 1000000000 / + (adapter->current_itr * 256); + } else if ((ec->rx_coalesce_usecs == 3) || + (ec->rx_coalesce_usecs == 2)) { adapter->current_itr = IGBVF_START_ITR; adapter->requested_itr = ec->rx_coalesce_usecs; - } else { - adapter->current_itr = ec->rx_coalesce_usecs << 2; + } else if (ec->rx_coalesce_usecs == 0) { + /* + * The user's desire is to turn off interrupt throttling + * altogether, but due to HW limitations, we can't do that. + * Instead we set a very small value in EITR, which would + * allow ~967k interrupts per second, but allow the adapter's + * internal clocking to still function properly. + */ + adapter->current_itr = 4; adapter->requested_itr = 1000000000 / (adapter->current_itr * 256); - } + } else + return -EINVAL; writel(adapter->current_itr, hw->hw_addr + adapter->rx_ring->itr_register); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 3ef3c5284e52..7af291e236bf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -196,7 +196,7 @@ enum ixgbe_ring_state_t { __IXGBE_HANG_CHECK_ARMED, __IXGBE_RX_RSC_ENABLED, __IXGBE_RX_CSUM_UDP_ZERO_ERR, - __IXGBE_RX_FCOE_BUFSZ, + __IXGBE_RX_FCOE, }; #define check_for_tx_hang(ring) \ @@ -290,7 +290,7 @@ struct ixgbe_ring_feature { #if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192) static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring) { - return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0; + return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0; } #else #define ixgbe_rx_pg_order(_ring) 0 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index af1a5314b494..c377706e81a8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -634,7 +634,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, f = &adapter->ring_feature[RING_F_FCOE]; if ((rxr_idx >= f->mask) && (rxr_idx < f->mask + f->indices)) - set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state); + set_bit(__IXGBE_RX_FCOE, &ring->state); } #endif /* IXGBE_FCOE */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index bf20457ea23a..e242104ab471 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1058,17 +1058,17 @@ static inline void ixgbe_rx_hash(struct ixgbe_ring *ring, #ifdef IXGBE_FCOE /** * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type - * @adapter: address of board private structure + * @ring: structure containing ring specific data * @rx_desc: advanced rx descriptor * * Returns : true if it is FCoE pkt */ -static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter, +static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring, union ixgbe_adv_rx_desc *rx_desc) { __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && + return test_bit(__IXGBE_RX_FCOE, &ring->state) && ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); @@ -1148,7 +1148,7 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, /* alloc new page for storage */ if (likely(!page)) { - page = alloc_pages(GFP_ATOMIC | __GFP_COLD, + page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, ixgbe_rx_pg_order(rx_ring)); if (unlikely(!page)) { rx_ring->rx_stats.alloc_rx_page_failed++; @@ -1390,6 +1390,8 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb) { + struct net_device *dev = rx_ring->netdev; + ixgbe_update_rsc_stats(rx_ring, skb); ixgbe_rx_hash(rx_ring, rx_desc, skb); @@ -1401,14 +1403,15 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); #endif - if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { + if ((dev->features & NETIF_F_HW_VLAN_RX) && + ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan); __vlan_hwaccel_put_tag(skb, vid); } skb_record_rx_queue(skb, rx_ring->queue_index); - skb->protocol = eth_type_trans(skb, rx_ring->netdev); + skb->protocol = eth_type_trans(skb, dev); } static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector, @@ -1546,6 +1549,12 @@ static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring, skb->truesize -= ixgbe_rx_bufsz(rx_ring); } +#ifdef IXGBE_FCOE + /* do not attempt to pad FCoE Frames as this will disrupt DDP */ + if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) + return false; + +#endif /* if skb_pad returns an error the skb was freed */ if (unlikely(skb->len < 60)) { int pad_len = 60 - skb->len; @@ -1772,7 +1781,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, #ifdef IXGBE_FCOE /* if ddp, not passing to ULD unless for FCP_RSP or error */ - if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { + if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb); if (!ddp_bytes) { dev_kfree_skb_any(skb); @@ -3607,10 +3616,6 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) if (hw->mac.type == ixgbe_mac_82598EB) netif_set_gso_max_size(adapter->netdev, 32768); - - /* Enable VLAN tag insert/strip */ - adapter->netdev->features |= NETIF_F_HW_VLAN_RX; - hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true); #ifdef IXGBE_FCOE @@ -6642,6 +6647,11 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) return -EINVAL; } + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + e_err(drv, "Enable failed, SR-IOV enabled\n"); + return -EINVAL; + } + /* Hardware supports up to 8 traffic classes */ if (tc > adapter->dcb_cfg.num_tcs.pg_tcs || (hw->mac.type == ixgbe_mac_82598EB && @@ -6701,11 +6711,6 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); -#ifdef CONFIG_DCB - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) - features &= ~NETIF_F_HW_VLAN_RX; -#endif - /* return error if RXHASH is being enabled when RSS is not supported */ if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) features &= ~NETIF_F_RXHASH; @@ -6718,7 +6723,6 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev, if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) features &= ~NETIF_F_LRO; - return features; } @@ -6766,6 +6770,11 @@ static int ixgbe_set_features(struct net_device *netdev, need_reset = true; } + if (features & NETIF_F_HW_VLAN_RX) + ixgbe_vlan_strip_enable(adapter); + else + ixgbe_vlan_strip_disable(adapter); + if (changed & NETIF_F_RXALL) need_reset = true; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index ddc6a4d19302..dcebd128becf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -708,6 +708,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 incval = 0; + u32 timinca = 0; u32 shift = 0; u32 cycle_speed; unsigned long flags; @@ -730,8 +731,16 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) break; } - /* Bail if the cycle speed didn't change */ - if (adapter->cycle_speed == cycle_speed) + /* + * grab the current TIMINCA value from the register so that it can be + * double checked. If the register value has been cleared, it must be + * reset to the correct value for generating a cyclecounter. If + * TIMINCA is zero, the SYSTIME registers do not increment at all. + */ + timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA); + + /* Bail if the cycle speed didn't change and TIMINCA is non-zero */ + if (adapter->cycle_speed == cycle_speed && timinca) return; /* disable the SDP clock out */ diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index f69ec4288b10..41e32257a4e8 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -201,6 +201,9 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter, unsigned int i, eop, count = 0; unsigned int total_bytes = 0, total_packets = 0; + if (test_bit(__IXGBEVF_DOWN, &adapter->state)) + return true; + i = tx_ring->next_to_clean; eop = tx_ring->tx_buffer_info[i].next_to_watch; eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); @@ -969,8 +972,6 @@ static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data) r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); for (i = 0; i < q_vector->txr_count; i++) { tx_ring = &(adapter->tx_ring[r_idx]); - tx_ring->total_bytes = 0; - tx_ring->total_packets = 0; ixgbevf_clean_tx_irq(adapter, tx_ring); r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, r_idx + 1); @@ -994,16 +995,6 @@ static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data) struct ixgbe_hw *hw = &adapter->hw; struct ixgbevf_ring *rx_ring; int r_idx; - int i; - - r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); - for (i = 0; i < q_vector->rxr_count; i++) { - rx_ring = &(adapter->rx_ring[r_idx]); - rx_ring->total_bytes = 0; - rx_ring->total_packets = 0; - r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues, - r_idx + 1); - } if (!q_vector->rxr_count) return IRQ_HANDLED; diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 04d901d0ff63..f0f06b2bc28b 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -436,7 +436,9 @@ struct mv643xx_eth_private { /* * Hardware-specific parameters. */ +#if defined(CONFIG_HAVE_CLK) struct clk *clk; +#endif unsigned int t_clk; }; @@ -2895,17 +2897,17 @@ static int mv643xx_eth_probe(struct platform_device *pdev) mp->dev = dev; /* - * Get the clk rate, if there is one, otherwise use the default. + * Start with a default rate, and if there is a clock, allow + * it to override the default. */ + mp->t_clk = 133000000; +#if defined(CONFIG_HAVE_CLK) mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0")); if (!IS_ERR(mp->clk)) { clk_prepare_enable(mp->clk); mp->t_clk = clk_get_rate(mp->clk); - } else { - mp->t_clk = 133000000; - printk(KERN_WARNING "Unable to get clock"); } - +#endif set_params(mp, pd); netif_set_real_num_tx_queues(dev, mp->txq_count); netif_set_real_num_rx_queues(dev, mp->rxq_count); @@ -2995,10 +2997,13 @@ static int mv643xx_eth_remove(struct platform_device *pdev) phy_detach(mp->phy); cancel_work_sync(&mp->tx_timeout_task); +#if defined(CONFIG_HAVE_CLK) if (!IS_ERR(mp->clk)) { clk_disable_unprepare(mp->clk); clk_put(mp->clk); } +#endif + free_netdev(mp->dev); platform_set_drvdata(pdev, NULL); diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index cace36f2ab92..28a54451a3e5 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4381,10 +4381,12 @@ static int sky2_set_features(struct net_device *dev, netdev_features_t features) struct sky2_port *sky2 = netdev_priv(dev); netdev_features_t changed = dev->features ^ features; - if (changed & NETIF_F_RXCSUM) { - bool on = features & NETIF_F_RXCSUM; - sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), - on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); + if ((changed & NETIF_F_RXCSUM) && + !(sky2->hw->flags & SKY2_HW_NEW_LE)) { + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + (features & NETIF_F_RXCSUM) + ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } if (changed & NETIF_F_RXHASH) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 926d8aac941c..073b85b45fc5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -929,15 +929,20 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv) if (priv->rx_cq[i].buf) mlx4_en_destroy_cq(priv, &priv->rx_cq[i]); } + + if (priv->base_tx_qpn) { + mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num); + priv->base_tx_qpn = 0; + } } int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) { struct mlx4_en_port_profile *prof = priv->prof; int i; - int base_tx_qpn, err; + int err; - err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn); + err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn); if (err) { en_err(priv, "failed reserving range for TX rings\n"); return err; @@ -949,7 +954,7 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) prof->tx_ring_size, i, TX)) goto err; - if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i, + if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i, prof->tx_ring_size, TXBB_SIZE)) goto err; } @@ -969,7 +974,6 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) err: en_err(priv, "Failed to allocate NIC resources\n"); - mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num); return -ENOMEM; } @@ -1204,9 +1208,11 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num); /* Configure port */ + mlx4_en_calc_rx_buf(dev); err = mlx4_SET_PORT_general(mdev->dev, priv->port, - MLX4_EN_MIN_MTU, - 0, 0, 0, 0); + priv->rx_skb_size + ETH_FCS_LEN, + prof->tx_pause, prof->tx_ppp, + prof->rx_pause, prof->rx_ppp); if (err) { en_err(priv, "Failed setting port general configurations " "for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index ee6f4fe00837..a0313de122de 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1975,6 +1975,8 @@ slave_start: if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) && !mlx4_is_mfunc(dev)) { dev->flags &= ~MLX4_FLAG_MSI_X; + dev->caps.num_comp_vectors = 1; + dev->caps.comp_pool = 0; pci_disable_msix(pdev); err = mlx4_setup_hca(dev); } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 6ae350921b1a..225c20d47900 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -495,6 +495,7 @@ struct mlx4_en_priv { int vids[128]; bool wol; struct device *ddev; + int base_tx_qpn; #ifdef CONFIG_MLX4_EN_DCB struct ieee_ets ets; diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 8d2666fcffd7..083d6715335c 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -946,16 +946,16 @@ static void __lpc_handle_xmit(struct net_device *ndev) /* Update stats */ ndev->stats.tx_packets++; ndev->stats.tx_bytes += skb->len; - - /* Free buffer */ - dev_kfree_skb_irq(skb); } + dev_kfree_skb_irq(skb); txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base)); } - if (netif_queue_stopped(ndev)) - netif_wake_queue(ndev); + if (pldat->num_used_tx_buffs <= ENET_TX_DESC/2) { + if (netif_queue_stopped(ndev)) + netif_wake_queue(ndev); + } } static int __lpc_handle_recv(struct net_device *ndev, int budget) @@ -1320,6 +1320,7 @@ static const struct net_device_ops lpc_netdev_ops = { .ndo_set_rx_mode = lpc_eth_set_multicast_list, .ndo_do_ioctl = lpc_eth_ioctl, .ndo_set_mac_address = lpc_set_mac_address, + .ndo_change_mtu = eth_change_mtu, }; static int lpc_eth_drv_probe(struct platform_device *pdev) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 46e77a2c5121..ad98f4d7919d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -479,7 +479,7 @@ qlcnic_init_pci_info(struct qlcnic_adapter *adapter) for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { pfn = pci_info[i].id; - if (pfn > QLCNIC_MAX_PCI_FUNC) { + if (pfn >= QLCNIC_MAX_PCI_FUNC) { ret = QL_STATUS_INVALID_PARAM; goto err_eswitch; } diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 9757ce3543a0..d7a04e091101 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3894,6 +3894,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) case RTL_GIGA_MAC_VER_22: case RTL_GIGA_MAC_VER_23: case RTL_GIGA_MAC_VER_24: + case RTL_GIGA_MAC_VER_34: RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST); break; default: @@ -5889,11 +5890,7 @@ static void rtl_slow_event_work(struct rtl8169_private *tp) if (status & LinkChg) __rtl8169_check_link_status(dev, tp, tp->mmio_addr, true); - napi_disable(&tp->napi); - rtl_irq_disable(tp); - - napi_enable(&tp->napi); - napi_schedule(&tp->napi); + rtl_irq_enable_all(tp); } static void rtl_task(struct work_struct *work) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 667169b82526..79bf09b41971 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1011,7 +1011,7 @@ static int sh_eth_txfree(struct net_device *ndev) } /* Packet receive function */ -static int sh_eth_rx(struct net_device *ndev) +static int sh_eth_rx(struct net_device *ndev, u32 intr_status) { struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_rxdesc *rxdesc; @@ -1102,9 +1102,11 @@ static int sh_eth_rx(struct net_device *ndev) /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) { - /* fix the values for the next receiving */ - mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) - - sh_eth_read(ndev, RDLAR)) >> 4; + /* fix the values for the next receiving if RDE is set */ + if (intr_status & EESR_RDE) + mdp->cur_rx = mdp->dirty_rx = + (sh_eth_read(ndev, RDFAR) - + sh_eth_read(ndev, RDLAR)) >> 4; sh_eth_write(ndev, EDRRR_R, EDRRR); } @@ -1273,7 +1275,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) EESR_RTSF | /* short frame recv */ EESR_PRE | /* PHY-LSI recv error */ EESR_CERF)){ /* recv frame CRC error */ - sh_eth_rx(ndev); + sh_eth_rx(ndev, intr_status); } /* Tx Check */ diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 036428348faa..9f448279e12a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -13,7 +13,7 @@ config STMMAC_ETH if STMMAC_ETH config STMMAC_PLATFORM - tristate "STMMAC platform bus support" + bool "STMMAC Platform bus support" depends on STMMAC_ETH default y ---help--- @@ -26,7 +26,7 @@ config STMMAC_PLATFORM If unsure, say N. config STMMAC_PCI - tristate "STMMAC support on PCI bus (EXPERIMENTAL)" + bool "STMMAC PCI bus support (EXPERIMENTAL)" depends on STMMAC_ETH && PCI && EXPERIMENTAL ---help--- This is to select the Synopsys DWMAC available on PCI devices, diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c index fb8377da1687..4b785e10f2ed 100644 --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c @@ -51,7 +51,7 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) desc->des3 = desc->des2 + BUF_SIZE_4KiB; priv->hw->desc->prepare_tx_desc(desc, 1, bmax, csum); - + wmb(); entry = (++priv->cur_tx) % txsize; desc = priv->dma_tx + entry; @@ -59,6 +59,7 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) len, DMA_TO_DEVICE); desc->des3 = desc->des2 + BUF_SIZE_4KiB; priv->hw->desc->prepare_tx_desc(desc, 0, len, csum); + wmb(); priv->hw->desc->set_tx_owner(desc); priv->tx_skbuff[entry] = NULL; } else { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 6b5d060ee9de..dc20c56efc9d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -26,6 +26,7 @@ #include <linux/clk.h> #include <linux/stmmac.h> #include <linux/phy.h> +#include <linux/pci.h> #include "common.h" #ifdef CONFIG_STMMAC_TIMER #include "stmmac_timer.h" @@ -95,7 +96,6 @@ extern int stmmac_mdio_register(struct net_device *ndev); extern void stmmac_set_ethtool_ops(struct net_device *netdev); extern const struct stmmac_desc_ops enh_desc_ops; extern const struct stmmac_desc_ops ndesc_ops; - int stmmac_freeze(struct net_device *ndev); int stmmac_restore(struct net_device *ndev); int stmmac_resume(struct net_device *ndev); @@ -109,7 +109,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, static inline int stmmac_clk_enable(struct stmmac_priv *priv) { if (!IS_ERR(priv->stmmac_clk)) - return clk_enable(priv->stmmac_clk); + return clk_prepare_enable(priv->stmmac_clk); return 0; } @@ -119,7 +119,7 @@ static inline void stmmac_clk_disable(struct stmmac_priv *priv) if (IS_ERR(priv->stmmac_clk)) return; - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); } static inline int stmmac_clk_get(struct stmmac_priv *priv) { @@ -143,3 +143,60 @@ static inline int stmmac_clk_get(struct stmmac_priv *priv) return 0; } #endif /* CONFIG_HAVE_CLK */ + + +#ifdef CONFIG_STMMAC_PLATFORM +extern struct platform_driver stmmac_pltfr_driver; +static inline int stmmac_register_platform(void) +{ + int err; + + err = platform_driver_register(&stmmac_pltfr_driver); + if (err) + pr_err("stmmac: failed to register the platform driver\n"); + + return err; +} +static inline void stmmac_unregister_platform(void) +{ + platform_driver_register(&stmmac_pltfr_driver); +} +#else +static inline int stmmac_register_platform(void) +{ + pr_debug("stmmac: do not register the platf driver\n"); + + return -EINVAL; +} +static inline void stmmac_unregister_platform(void) +{ +} +#endif /* CONFIG_STMMAC_PLATFORM */ + +#ifdef CONFIG_STMMAC_PCI +extern struct pci_driver stmmac_pci_driver; +static inline int stmmac_register_pci(void) +{ + int err; + + err = pci_register_driver(&stmmac_pci_driver); + if (err) + pr_err("stmmac: failed to register the PCI driver\n"); + + return err; +} +static inline void stmmac_unregister_pci(void) +{ + pci_unregister_driver(&stmmac_pci_driver); +} +#else +static inline int stmmac_register_pci(void) +{ + pr_debug("stmmac: do not register the PCI driver\n"); + + return -EINVAL; +} +static inline void stmmac_unregister_pci(void) +{ +} +#endif /* CONFIG_STMMAC_PCI */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 70966330f44e..ea3003edde18 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -833,8 +833,9 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) /** * stmmac_selec_desc_mode - * @dev : device pointer - * Description: select the Enhanced/Alternate or Normal descriptors */ + * @priv : private structure + * Description: select the Enhanced/Alternate or Normal descriptors + */ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) { if (priv->plat->enh_desc) { @@ -1211,6 +1212,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion); wmb(); priv->hw->desc->set_tx_owner(desc); + wmb(); } /* Interrupt on completition only for the latest segment */ @@ -1226,6 +1228,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* To avoid raise condition */ priv->hw->desc->set_tx_owner(first); + wmb(); priv->cur_tx++; @@ -1289,6 +1292,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) } wmb(); priv->hw->desc->set_rx_owner(p + entry); + wmb(); } } @@ -1861,6 +1865,8 @@ static int stmmac_hw_init(struct stmmac_priv *priv) /** * stmmac_dvr_probe * @device: device pointer + * @plat_dat: platform data pointer + * @addr: iobase memory address * Description: this is the main probe function used to * call the alloc_etherdev, allocate the priv structure. */ @@ -2090,6 +2096,34 @@ int stmmac_restore(struct net_device *ndev) } #endif /* CONFIG_PM */ +/* Driver can be configured w/ and w/ both PCI and Platf drivers + * depending on the configuration selected. + */ +static int __init stmmac_init(void) +{ + int err_plt = 0; + int err_pci = 0; + + err_plt = stmmac_register_platform(); + err_pci = stmmac_register_pci(); + + if ((err_pci) && (err_plt)) { + pr_err("stmmac: driver registration failed\n"); + return -EINVAL; + } + + return 0; +} + +static void __exit stmmac_exit(void) +{ + stmmac_unregister_platform(); + stmmac_unregister_pci(); +} + +module_init(stmmac_init); +module_exit(stmmac_exit); + #ifndef MODULE static int __init stmmac_cmdline_opt(char *str) { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 58fab5303e9c..cf826e6b6aa1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -179,7 +179,7 @@ static DEFINE_PCI_DEVICE_TABLE(stmmac_id_table) = { MODULE_DEVICE_TABLE(pci, stmmac_id_table); -static struct pci_driver stmmac_driver = { +struct pci_driver stmmac_pci_driver = { .name = STMMAC_RESOURCE_NAME, .id_table = stmmac_id_table, .probe = stmmac_pci_probe, @@ -190,33 +190,6 @@ static struct pci_driver stmmac_driver = { #endif }; -/** - * stmmac_init_module - Entry point for the driver - * Description: This function is the entry point for the driver. - */ -static int __init stmmac_init_module(void) -{ - int ret; - - ret = pci_register_driver(&stmmac_driver); - if (ret < 0) - pr_err("%s: ERROR: driver registration failed\n", __func__); - - return ret; -} - -/** - * stmmac_cleanup_module - Cleanup routine for the driver - * Description: This function is the cleanup routine for the driver. - */ -static void __exit stmmac_cleanup_module(void) -{ - pci_unregister_driver(&stmmac_driver); -} - -module_init(stmmac_init_module); -module_exit(stmmac_cleanup_module); - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver"); MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 3dd8f0803808..680d2b8dfe27 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -255,7 +255,7 @@ static const struct of_device_id stmmac_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, stmmac_dt_ids); -static struct platform_driver stmmac_driver = { +struct platform_driver stmmac_pltfr_driver = { .probe = stmmac_pltfr_probe, .remove = stmmac_pltfr_remove, .driver = { @@ -266,8 +266,6 @@ static struct platform_driver stmmac_driver = { }, }; -module_platform_driver(stmmac_driver); - MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index 703c8cce2a2c..8c726b7004d3 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -3598,7 +3598,6 @@ static int release_tx_packet(struct niu *np, struct tx_ring_info *rp, int idx) static void niu_tx_work(struct niu *np, struct tx_ring_info *rp) { struct netdev_queue *txq; - unsigned int tx_bytes; u16 pkt_cnt, tmp; int cons, index; u64 cs; @@ -3621,18 +3620,12 @@ static void niu_tx_work(struct niu *np, struct tx_ring_info *rp) netif_printk(np, tx_done, KERN_DEBUG, np->dev, "%s() pkt_cnt[%u] cons[%d]\n", __func__, pkt_cnt, cons); - tx_bytes = 0; - tmp = pkt_cnt; - while (tmp--) { - tx_bytes += rp->tx_buffs[cons].skb->len; + while (pkt_cnt--) cons = release_tx_packet(np, rp, cons); - } rp->cons = cons; smp_mb(); - netdev_tx_completed_queue(txq, pkt_cnt, tx_bytes); - out: if (unlikely(netif_tx_queue_stopped(txq) && (niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))) { @@ -4333,7 +4326,6 @@ static void niu_free_channels(struct niu *np) struct tx_ring_info *rp = &np->tx_rings[i]; niu_free_tx_ring_info(np, rp); - netdev_tx_reset_queue(netdev_get_tx_queue(np->dev, i)); } kfree(np->tx_rings); np->tx_rings = NULL; @@ -6739,8 +6731,6 @@ static netdev_tx_t niu_start_xmit(struct sk_buff *skb, prod = NEXT_TX(rp, prod); } - netdev_tx_sent_queue(txq, skb->len); - if (prod < rp->prod) rp->wrap_bit ^= TX_RING_KICK_WRAP; rp->prod = prod; diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index d614c374ed9d..3b5c4571b55e 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/device.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/dma-mapping.h> diff --git a/drivers/net/ethernet/tile/Kconfig b/drivers/net/ethernet/tile/Kconfig index 2d9218f86bca..098b1c42b393 100644 --- a/drivers/net/ethernet/tile/Kconfig +++ b/drivers/net/ethernet/tile/Kconfig @@ -7,6 +7,8 @@ config TILE_NET depends on TILE default y select CRC32 + select TILE_GXIO_MPIPE if TILEGX + select HIGH_RES_TIMERS if TILEGX ---help--- This is a standard Linux network device driver for the on-chip Tilera Gigabit Ethernet and XAUI interfaces. diff --git a/drivers/net/ethernet/tile/Makefile b/drivers/net/ethernet/tile/Makefile index f634f142cab4..0ef9eefd3211 100644 --- a/drivers/net/ethernet/tile/Makefile +++ b/drivers/net/ethernet/tile/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_TILE_NET) += tile_net.o ifdef CONFIG_TILEGX -tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o +tile_net-y := tilegx.o else -tile_net-objs := tilepro.o +tile_net-y := tilepro.o endif diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c new file mode 100644 index 000000000000..83b4b388ad49 --- /dev/null +++ b/drivers/net/ethernet/tile/tilegx.c @@ -0,0 +1,1898 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <linux/sched.h> +#include <linux/kernel.h> /* printk() */ +#include <linux/slab.h> /* kmalloc() */ +#include <linux/errno.h> /* error codes */ +#include <linux/types.h> /* size_t */ +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/irq.h> +#include <linux/netdevice.h> /* struct device, and other headers */ +#include <linux/etherdevice.h> /* eth_type_trans */ +#include <linux/skbuff.h> +#include <linux/ioctl.h> +#include <linux/cdev.h> +#include <linux/hugetlb.h> +#include <linux/in6.h> +#include <linux/timer.h> +#include <linux/hrtimer.h> +#include <linux/ktime.h> +#include <linux/io.h> +#include <linux/ctype.h> +#include <linux/ip.h> +#include <linux/tcp.h> + +#include <asm/checksum.h> +#include <asm/homecache.h> +#include <gxio/mpipe.h> +#include <arch/sim.h> + +/* Default transmit lockup timeout period, in jiffies. */ +#define TILE_NET_TIMEOUT (5 * HZ) + +/* The maximum number of distinct channels (idesc.channel is 5 bits). */ +#define TILE_NET_CHANNELS 32 + +/* Maximum number of idescs to handle per "poll". */ +#define TILE_NET_BATCH 128 + +/* Maximum number of packets to handle per "poll". */ +#define TILE_NET_WEIGHT 64 + +/* Number of entries in each iqueue. */ +#define IQUEUE_ENTRIES 512 + +/* Number of entries in each equeue. */ +#define EQUEUE_ENTRIES 2048 + +/* Total header bytes per equeue slot. Must be big enough for 2 bytes + * of NET_IP_ALIGN alignment, plus 14 bytes (?) of L2 header, plus up to + * 60 bytes of actual TCP header. We round up to align to cache lines. + */ +#define HEADER_BYTES 128 + +/* Maximum completions per cpu per device (must be a power of two). + * ISSUE: What is the right number here? If this is too small, then + * egress might block waiting for free space in a completions array. + * ISSUE: At the least, allocate these only for initialized echannels. + */ +#define TILE_NET_MAX_COMPS 64 + +#define MAX_FRAGS (MAX_SKB_FRAGS + 1) + +/* Size of completions data to allocate. + * ISSUE: Probably more than needed since we don't use all the channels. + */ +#define COMPS_SIZE (TILE_NET_CHANNELS * sizeof(struct tile_net_comps)) + +/* Size of NotifRing data to allocate. */ +#define NOTIF_RING_SIZE (IQUEUE_ENTRIES * sizeof(gxio_mpipe_idesc_t)) + +/* Timeout to wake the per-device TX timer after we stop the queue. + * We don't want the timeout too short (adds overhead, and might end + * up causing stop/wake/stop/wake cycles) or too long (affects performance). + * For the 10 Gb NIC, 30 usec means roughly 30+ 1500-byte packets. + */ +#define TX_TIMER_DELAY_USEC 30 + +/* Timeout to wake the per-cpu egress timer to free completions. */ +#define EGRESS_TIMER_DELAY_USEC 1000 + +MODULE_AUTHOR("Tilera Corporation"); +MODULE_LICENSE("GPL"); + +/* A "packet fragment" (a chunk of memory). */ +struct frag { + void *buf; + size_t length; +}; + +/* A single completion. */ +struct tile_net_comp { + /* The "complete_count" when the completion will be complete. */ + s64 when; + /* The buffer to be freed when the completion is complete. */ + struct sk_buff *skb; +}; + +/* The completions for a given cpu and echannel. */ +struct tile_net_comps { + /* The completions. */ + struct tile_net_comp comp_queue[TILE_NET_MAX_COMPS]; + /* The number of completions used. */ + unsigned long comp_next; + /* The number of completions freed. */ + unsigned long comp_last; +}; + +/* The transmit wake timer for a given cpu and echannel. */ +struct tile_net_tx_wake { + struct hrtimer timer; + struct net_device *dev; +}; + +/* Info for a specific cpu. */ +struct tile_net_info { + /* The NAPI struct. */ + struct napi_struct napi; + /* Packet queue. */ + gxio_mpipe_iqueue_t iqueue; + /* Our cpu. */ + int my_cpu; + /* True if iqueue is valid. */ + bool has_iqueue; + /* NAPI flags. */ + bool napi_added; + bool napi_enabled; + /* Number of small sk_buffs which must still be provided. */ + unsigned int num_needed_small_buffers; + /* Number of large sk_buffs which must still be provided. */ + unsigned int num_needed_large_buffers; + /* A timer for handling egress completions. */ + struct hrtimer egress_timer; + /* True if "egress_timer" is scheduled. */ + bool egress_timer_scheduled; + /* Comps for each egress channel. */ + struct tile_net_comps *comps_for_echannel[TILE_NET_CHANNELS]; + /* Transmit wake timer for each egress channel. */ + struct tile_net_tx_wake tx_wake[TILE_NET_CHANNELS]; +}; + +/* Info for egress on a particular egress channel. */ +struct tile_net_egress { + /* The "equeue". */ + gxio_mpipe_equeue_t *equeue; + /* The headers for TSO. */ + unsigned char *headers; +}; + +/* Info for a specific device. */ +struct tile_net_priv { + /* Our network device. */ + struct net_device *dev; + /* The primary link. */ + gxio_mpipe_link_t link; + /* The primary channel, if open, else -1. */ + int channel; + /* The "loopify" egress link, if needed. */ + gxio_mpipe_link_t loopify_link; + /* The "loopify" egress channel, if open, else -1. */ + int loopify_channel; + /* The egress channel (channel or loopify_channel). */ + int echannel; + /* Total stats. */ + struct net_device_stats stats; +}; + +/* Egress info, indexed by "priv->echannel" (lazily created as needed). */ +static struct tile_net_egress egress_for_echannel[TILE_NET_CHANNELS]; + +/* Devices currently associated with each channel. + * NOTE: The array entry can become NULL after ifconfig down, but + * we do not free the underlying net_device structures, so it is + * safe to use a pointer after reading it from this array. + */ +static struct net_device *tile_net_devs_for_channel[TILE_NET_CHANNELS]; + +/* A mutex for "tile_net_devs_for_channel". */ +static DEFINE_MUTEX(tile_net_devs_for_channel_mutex); + +/* The per-cpu info. */ +static DEFINE_PER_CPU(struct tile_net_info, per_cpu_info); + +/* The "context" for all devices. */ +static gxio_mpipe_context_t context; + +/* Buffer sizes and mpipe enum codes for buffer stacks. + * See arch/tile/include/gxio/mpipe.h for the set of possible values. + */ +#define BUFFER_SIZE_SMALL_ENUM GXIO_MPIPE_BUFFER_SIZE_128 +#define BUFFER_SIZE_SMALL 128 +#define BUFFER_SIZE_LARGE_ENUM GXIO_MPIPE_BUFFER_SIZE_1664 +#define BUFFER_SIZE_LARGE 1664 + +/* The small/large "buffer stacks". */ +static int small_buffer_stack = -1; +static int large_buffer_stack = -1; + +/* Amount of memory allocated for each buffer stack. */ +static size_t buffer_stack_size; + +/* The actual memory allocated for the buffer stacks. */ +static void *small_buffer_stack_va; +static void *large_buffer_stack_va; + +/* The buckets. */ +static int first_bucket = -1; +static int num_buckets = 1; + +/* The ingress irq. */ +static int ingress_irq = -1; + +/* Text value of tile_net.cpus if passed as a module parameter. */ +static char *network_cpus_string; + +/* The actual cpus in "network_cpus". */ +static struct cpumask network_cpus_map; + +/* If "loopify=LINK" was specified, this is "LINK". */ +static char *loopify_link_name; + +/* If "tile_net.custom" was specified, this is non-NULL. */ +static char *custom_str; + +/* The "tile_net.cpus" argument specifies the cpus that are dedicated + * to handle ingress packets. + * + * The parameter should be in the form "tile_net.cpus=m-n[,x-y]", where + * m, n, x, y are integer numbers that represent the cpus that can be + * neither a dedicated cpu nor a dataplane cpu. + */ +static bool network_cpus_init(void) +{ + char buf[1024]; + int rc; + + if (network_cpus_string == NULL) + return false; + + rc = cpulist_parse_crop(network_cpus_string, &network_cpus_map); + if (rc != 0) { + pr_warn("tile_net.cpus=%s: malformed cpu list\n", + network_cpus_string); + return false; + } + + /* Remove dedicated cpus. */ + cpumask_and(&network_cpus_map, &network_cpus_map, cpu_possible_mask); + + if (cpumask_empty(&network_cpus_map)) { + pr_warn("Ignoring empty tile_net.cpus='%s'.\n", + network_cpus_string); + return false; + } + + cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map); + pr_info("Linux network CPUs: %s\n", buf); + return true; +} + +module_param_named(cpus, network_cpus_string, charp, 0444); +MODULE_PARM_DESC(cpus, "cpulist of cores that handle network interrupts"); + +/* The "tile_net.loopify=LINK" argument causes the named device to + * actually use "loop0" for ingress, and "loop1" for egress. This + * allows an app to sit between the actual link and linux, passing + * (some) packets along to linux, and forwarding (some) packets sent + * out by linux. + */ +module_param_named(loopify, loopify_link_name, charp, 0444); +MODULE_PARM_DESC(loopify, "name the device to use loop0/1 for ingress/egress"); + +/* The "tile_net.custom" argument causes us to ignore the "conventional" + * classifier metadata, in particular, the "l2_offset". + */ +module_param_named(custom, custom_str, charp, 0444); +MODULE_PARM_DESC(custom, "indicates a (heavily) customized classifier"); + +/* Atomically update a statistics field. + * Note that on TILE-Gx, this operation is fire-and-forget on the + * issuing core (single-cycle dispatch) and takes only a few cycles + * longer than a regular store when the request reaches the home cache. + * No expensive bus management overhead is required. + */ +static void tile_net_stats_add(unsigned long value, unsigned long *field) +{ + BUILD_BUG_ON(sizeof(atomic_long_t) != sizeof(unsigned long)); + atomic_long_add(value, (atomic_long_t *)field); +} + +/* Allocate and push a buffer. */ +static bool tile_net_provide_buffer(bool small) +{ + int stack = small ? small_buffer_stack : large_buffer_stack; + const unsigned long buffer_alignment = 128; + struct sk_buff *skb; + int len; + + len = sizeof(struct sk_buff **) + buffer_alignment; + len += (small ? BUFFER_SIZE_SMALL : BUFFER_SIZE_LARGE); + skb = dev_alloc_skb(len); + if (skb == NULL) + return false; + + /* Make room for a back-pointer to 'skb' and guarantee alignment. */ + skb_reserve(skb, sizeof(struct sk_buff **)); + skb_reserve(skb, -(long)skb->data & (buffer_alignment - 1)); + + /* Save a back-pointer to 'skb'. */ + *(struct sk_buff **)(skb->data - sizeof(struct sk_buff **)) = skb; + + /* Make sure "skb" and the back-pointer have been flushed. */ + wmb(); + + gxio_mpipe_push_buffer(&context, stack, + (void *)va_to_tile_io_addr(skb->data)); + + return true; +} + +/* Convert a raw mpipe buffer to its matching skb pointer. */ +static struct sk_buff *mpipe_buf_to_skb(void *va) +{ + /* Acquire the associated "skb". */ + struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); + struct sk_buff *skb = *skb_ptr; + + /* Paranoia. */ + if (skb->data != va) { + /* Panic here since there's a reasonable chance + * that corrupt buffers means generic memory + * corruption, with unpredictable system effects. + */ + panic("Corrupt linux buffer! va=%p, skb=%p, skb->data=%p", + va, skb, skb->data); + } + + return skb; +} + +static void tile_net_pop_all_buffers(int stack) +{ + for (;;) { + tile_io_addr_t addr = + (tile_io_addr_t)gxio_mpipe_pop_buffer(&context, stack); + if (addr == 0) + break; + dev_kfree_skb_irq(mpipe_buf_to_skb(tile_io_addr_to_va(addr))); + } +} + +/* Provide linux buffers to mPIPE. */ +static void tile_net_provide_needed_buffers(void) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + + while (info->num_needed_small_buffers != 0) { + if (!tile_net_provide_buffer(true)) + goto oops; + info->num_needed_small_buffers--; + } + + while (info->num_needed_large_buffers != 0) { + if (!tile_net_provide_buffer(false)) + goto oops; + info->num_needed_large_buffers--; + } + + return; + +oops: + /* Add a description to the page allocation failure dump. */ + pr_notice("Tile %d still needs some buffers\n", info->my_cpu); +} + +static inline bool filter_packet(struct net_device *dev, void *buf) +{ + /* Filter packets received before we're up. */ + if (dev == NULL || !(dev->flags & IFF_UP)) + return true; + + /* Filter out packets that aren't for us. */ + if (!(dev->flags & IFF_PROMISC) && + !is_multicast_ether_addr(buf) && + compare_ether_addr(dev->dev_addr, buf) != 0) + return true; + + return false; +} + +static void tile_net_receive_skb(struct net_device *dev, struct sk_buff *skb, + gxio_mpipe_idesc_t *idesc, unsigned long len) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + + /* Encode the actual packet length. */ + skb_put(skb, len); + + skb->protocol = eth_type_trans(skb, dev); + + /* Acknowledge "good" hardware checksums. */ + if (idesc->cs && idesc->csum_seed_val == 0xFFFF) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + netif_receive_skb(skb); + + /* Update stats. */ + tile_net_stats_add(1, &priv->stats.rx_packets); + tile_net_stats_add(len, &priv->stats.rx_bytes); + + /* Need a new buffer. */ + if (idesc->size == BUFFER_SIZE_SMALL_ENUM) + info->num_needed_small_buffers++; + else + info->num_needed_large_buffers++; +} + +/* Handle a packet. Return true if "processed", false if "filtered". */ +static bool tile_net_handle_packet(gxio_mpipe_idesc_t *idesc) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct net_device *dev = tile_net_devs_for_channel[idesc->channel]; + uint8_t l2_offset; + void *va; + void *buf; + unsigned long len; + bool filter; + + /* Drop packets for which no buffer was available. + * NOTE: This happens under heavy load. + */ + if (idesc->be) { + struct tile_net_priv *priv = netdev_priv(dev); + tile_net_stats_add(1, &priv->stats.rx_dropped); + gxio_mpipe_iqueue_consume(&info->iqueue, idesc); + if (net_ratelimit()) + pr_info("Dropping packet (insufficient buffers).\n"); + return false; + } + + /* Get the "l2_offset", if allowed. */ + l2_offset = custom_str ? 0 : gxio_mpipe_idesc_get_l2_offset(idesc); + + /* Get the raw buffer VA (includes "headroom"). */ + va = tile_io_addr_to_va((unsigned long)(long)idesc->va); + + /* Get the actual packet start/length. */ + buf = va + l2_offset; + len = idesc->l2_size - l2_offset; + + /* Point "va" at the raw buffer. */ + va -= NET_IP_ALIGN; + + filter = filter_packet(dev, buf); + if (filter) { + gxio_mpipe_iqueue_drop(&info->iqueue, idesc); + } else { + struct sk_buff *skb = mpipe_buf_to_skb(va); + + /* Skip headroom, and any custom header. */ + skb_reserve(skb, NET_IP_ALIGN + l2_offset); + + tile_net_receive_skb(dev, skb, idesc, len); + } + + gxio_mpipe_iqueue_consume(&info->iqueue, idesc); + return !filter; +} + +/* Handle some packets for the current CPU. + * + * This function handles up to TILE_NET_BATCH idescs per call. + * + * ISSUE: Since we do not provide new buffers until this function is + * complete, we must initially provide enough buffers for each network + * cpu to fill its iqueue and also its batched idescs. + * + * ISSUE: The "rotting packet" race condition occurs if a packet + * arrives after the queue appears to be empty, and before the + * hypervisor interrupt is re-enabled. + */ +static int tile_net_poll(struct napi_struct *napi, int budget) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + unsigned int work = 0; + gxio_mpipe_idesc_t *idesc; + int i, n; + + /* Process packets. */ + while ((n = gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc)) > 0) { + for (i = 0; i < n; i++) { + if (i == TILE_NET_BATCH) + goto done; + if (tile_net_handle_packet(idesc + i)) { + if (++work >= budget) + goto done; + } + } + } + + /* There are no packets left. */ + napi_complete(&info->napi); + + /* Re-enable hypervisor interrupts. */ + gxio_mpipe_enable_notif_ring_interrupt(&context, info->iqueue.ring); + + /* HACK: Avoid the "rotting packet" problem. */ + if (gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc) > 0) + napi_schedule(&info->napi); + + /* ISSUE: Handle completions? */ + +done: + tile_net_provide_needed_buffers(); + + return work; +} + +/* Handle an ingress interrupt on the current cpu. */ +static irqreturn_t tile_net_handle_ingress_irq(int irq, void *unused) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + napi_schedule(&info->napi); + return IRQ_HANDLED; +} + +/* Free some completions. This must be called with interrupts blocked. */ +static int tile_net_free_comps(gxio_mpipe_equeue_t *equeue, + struct tile_net_comps *comps, + int limit, bool force_update) +{ + int n = 0; + while (comps->comp_last < comps->comp_next) { + unsigned int cid = comps->comp_last % TILE_NET_MAX_COMPS; + struct tile_net_comp *comp = &comps->comp_queue[cid]; + if (!gxio_mpipe_equeue_is_complete(equeue, comp->when, + force_update || n == 0)) + break; + dev_kfree_skb_irq(comp->skb); + comps->comp_last++; + if (++n == limit) + break; + } + return n; +} + +/* Add a completion. This must be called with interrupts blocked. + * tile_net_equeue_try_reserve() will have ensured a free completion entry. + */ +static void add_comp(gxio_mpipe_equeue_t *equeue, + struct tile_net_comps *comps, + uint64_t when, struct sk_buff *skb) +{ + int cid = comps->comp_next % TILE_NET_MAX_COMPS; + comps->comp_queue[cid].when = when; + comps->comp_queue[cid].skb = skb; + comps->comp_next++; +} + +static void tile_net_schedule_tx_wake_timer(struct net_device *dev) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + + hrtimer_start(&info->tx_wake[priv->echannel].timer, + ktime_set(0, TX_TIMER_DELAY_USEC * 1000UL), + HRTIMER_MODE_REL_PINNED); +} + +static enum hrtimer_restart tile_net_handle_tx_wake_timer(struct hrtimer *t) +{ + struct tile_net_tx_wake *tx_wake = + container_of(t, struct tile_net_tx_wake, timer); + netif_wake_subqueue(tx_wake->dev, smp_processor_id()); + return HRTIMER_NORESTART; +} + +/* Make sure the egress timer is scheduled. */ +static void tile_net_schedule_egress_timer(void) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + + if (!info->egress_timer_scheduled) { + hrtimer_start(&info->egress_timer, + ktime_set(0, EGRESS_TIMER_DELAY_USEC * 1000UL), + HRTIMER_MODE_REL_PINNED); + info->egress_timer_scheduled = true; + } +} + +/* The "function" for "info->egress_timer". + * + * This timer will reschedule itself as long as there are any pending + * completions expected for this tile. + */ +static enum hrtimer_restart tile_net_handle_egress_timer(struct hrtimer *t) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + unsigned long irqflags; + bool pending = false; + int i; + + local_irq_save(irqflags); + + /* The timer is no longer scheduled. */ + info->egress_timer_scheduled = false; + + /* Free all possible comps for this tile. */ + for (i = 0; i < TILE_NET_CHANNELS; i++) { + struct tile_net_egress *egress = &egress_for_echannel[i]; + struct tile_net_comps *comps = info->comps_for_echannel[i]; + if (comps->comp_last >= comps->comp_next) + continue; + tile_net_free_comps(egress->equeue, comps, -1, true); + pending = pending || (comps->comp_last < comps->comp_next); + } + + /* Reschedule timer if needed. */ + if (pending) + tile_net_schedule_egress_timer(); + + local_irq_restore(irqflags); + + return HRTIMER_NORESTART; +} + +/* Helper function for "tile_net_update()". + * "dev" (i.e. arg) is the device being brought up or down, + * or NULL if all devices are now down. + */ +static void tile_net_update_cpu(void *arg) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct net_device *dev = arg; + + if (!info->has_iqueue) + return; + + if (dev != NULL) { + if (!info->napi_added) { + netif_napi_add(dev, &info->napi, + tile_net_poll, TILE_NET_WEIGHT); + info->napi_added = true; + } + if (!info->napi_enabled) { + napi_enable(&info->napi); + info->napi_enabled = true; + } + enable_percpu_irq(ingress_irq, 0); + } else { + disable_percpu_irq(ingress_irq); + if (info->napi_enabled) { + napi_disable(&info->napi); + info->napi_enabled = false; + } + /* FIXME: Drain the iqueue. */ + } +} + +/* Helper function for tile_net_open() and tile_net_stop(). + * Always called under tile_net_devs_for_channel_mutex. + */ +static int tile_net_update(struct net_device *dev) +{ + static gxio_mpipe_rules_t rules; /* too big to fit on the stack */ + bool saw_channel = false; + int channel; + int rc; + int cpu; + + gxio_mpipe_rules_init(&rules, &context); + + for (channel = 0; channel < TILE_NET_CHANNELS; channel++) { + if (tile_net_devs_for_channel[channel] == NULL) + continue; + if (!saw_channel) { + saw_channel = true; + gxio_mpipe_rules_begin(&rules, first_bucket, + num_buckets, NULL); + gxio_mpipe_rules_set_headroom(&rules, NET_IP_ALIGN); + } + gxio_mpipe_rules_add_channel(&rules, channel); + } + + /* NOTE: This can fail if there is no classifier. + * ISSUE: Can anything else cause it to fail? + */ + rc = gxio_mpipe_rules_commit(&rules); + if (rc != 0) { + netdev_warn(dev, "gxio_mpipe_rules_commit failed: %d\n", rc); + return -EIO; + } + + /* Update all cpus, sequentially (to protect "netif_napi_add()"). */ + for_each_online_cpu(cpu) + smp_call_function_single(cpu, tile_net_update_cpu, + (saw_channel ? dev : NULL), 1); + + /* HACK: Allow packets to flow in the simulator. */ + if (saw_channel) + sim_enable_mpipe_links(0, -1); + + return 0; +} + +/* Allocate and initialize mpipe buffer stacks, and register them in + * the mPIPE TLBs, for both small and large packet sizes. + * This routine supports tile_net_init_mpipe(), below. + */ +static int init_buffer_stacks(struct net_device *dev, int num_buffers) +{ + pte_t hash_pte = pte_set_home((pte_t) { 0 }, PAGE_HOME_HASH); + int rc; + + /* Compute stack bytes; we round up to 64KB and then use + * alloc_pages() so we get the required 64KB alignment as well. + */ + buffer_stack_size = + ALIGN(gxio_mpipe_calc_buffer_stack_bytes(num_buffers), + 64 * 1024); + + /* Allocate two buffer stack indices. */ + rc = gxio_mpipe_alloc_buffer_stacks(&context, 2, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_buffer_stacks failed: %d\n", + rc); + return rc; + } + small_buffer_stack = rc; + large_buffer_stack = rc + 1; + + /* Allocate the small memory stack. */ + small_buffer_stack_va = + alloc_pages_exact(buffer_stack_size, GFP_KERNEL); + if (small_buffer_stack_va == NULL) { + netdev_err(dev, + "Could not alloc %zd bytes for buffer stacks\n", + buffer_stack_size); + return -ENOMEM; + } + rc = gxio_mpipe_init_buffer_stack(&context, small_buffer_stack, + BUFFER_SIZE_SMALL_ENUM, + small_buffer_stack_va, + buffer_stack_size, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_init_buffer_stack: %d\n", rc); + return rc; + } + rc = gxio_mpipe_register_client_memory(&context, small_buffer_stack, + hash_pte, 0); + if (rc != 0) { + netdev_err(dev, + "gxio_mpipe_register_buffer_memory failed: %d\n", + rc); + return rc; + } + + /* Allocate the large buffer stack. */ + large_buffer_stack_va = + alloc_pages_exact(buffer_stack_size, GFP_KERNEL); + if (large_buffer_stack_va == NULL) { + netdev_err(dev, + "Could not alloc %zd bytes for buffer stacks\n", + buffer_stack_size); + return -ENOMEM; + } + rc = gxio_mpipe_init_buffer_stack(&context, large_buffer_stack, + BUFFER_SIZE_LARGE_ENUM, + large_buffer_stack_va, + buffer_stack_size, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_init_buffer_stack failed: %d\n", + rc); + return rc; + } + rc = gxio_mpipe_register_client_memory(&context, large_buffer_stack, + hash_pte, 0); + if (rc != 0) { + netdev_err(dev, + "gxio_mpipe_register_buffer_memory failed: %d\n", + rc); + return rc; + } + + return 0; +} + +/* Allocate per-cpu resources (memory for completions and idescs). + * This routine supports tile_net_init_mpipe(), below. + */ +static int alloc_percpu_mpipe_resources(struct net_device *dev, + int cpu, int ring) +{ + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + int order, i, rc; + struct page *page; + void *addr; + + /* Allocate the "comps". */ + order = get_order(COMPS_SIZE); + page = homecache_alloc_pages(GFP_KERNEL, order, cpu); + if (page == NULL) { + netdev_err(dev, "Failed to alloc %zd bytes comps memory\n", + COMPS_SIZE); + return -ENOMEM; + } + addr = pfn_to_kaddr(page_to_pfn(page)); + memset(addr, 0, COMPS_SIZE); + for (i = 0; i < TILE_NET_CHANNELS; i++) + info->comps_for_echannel[i] = + addr + i * sizeof(struct tile_net_comps); + + /* If this is a network cpu, create an iqueue. */ + if (cpu_isset(cpu, network_cpus_map)) { + order = get_order(NOTIF_RING_SIZE); + page = homecache_alloc_pages(GFP_KERNEL, order, cpu); + if (page == NULL) { + netdev_err(dev, + "Failed to alloc %zd bytes iqueue memory\n", + NOTIF_RING_SIZE); + return -ENOMEM; + } + addr = pfn_to_kaddr(page_to_pfn(page)); + rc = gxio_mpipe_iqueue_init(&info->iqueue, &context, ring++, + addr, NOTIF_RING_SIZE, 0); + if (rc < 0) { + netdev_err(dev, + "gxio_mpipe_iqueue_init failed: %d\n", rc); + return rc; + } + info->has_iqueue = true; + } + + return ring; +} + +/* Initialize NotifGroup and buckets. + * This routine supports tile_net_init_mpipe(), below. + */ +static int init_notif_group_and_buckets(struct net_device *dev, + int ring, int network_cpus_count) +{ + int group, rc; + + /* Allocate one NotifGroup. */ + rc = gxio_mpipe_alloc_notif_groups(&context, 1, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_notif_groups failed: %d\n", + rc); + return rc; + } + group = rc; + + /* Initialize global num_buckets value. */ + if (network_cpus_count > 4) + num_buckets = 256; + else if (network_cpus_count > 1) + num_buckets = 16; + + /* Allocate some buckets, and set global first_bucket value. */ + rc = gxio_mpipe_alloc_buckets(&context, num_buckets, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_buckets failed: %d\n", rc); + return rc; + } + first_bucket = rc; + + /* Init group and buckets. */ + rc = gxio_mpipe_init_notif_group_and_buckets( + &context, group, ring, network_cpus_count, + first_bucket, num_buckets, + GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY); + if (rc != 0) { + netdev_err( + dev, + "gxio_mpipe_init_notif_group_and_buckets failed: %d\n", + rc); + return rc; + } + + return 0; +} + +/* Create an irq and register it, then activate the irq and request + * interrupts on all cores. Note that "ingress_irq" being initialized + * is how we know not to call tile_net_init_mpipe() again. + * This routine supports tile_net_init_mpipe(), below. + */ +static int tile_net_setup_interrupts(struct net_device *dev) +{ + int cpu, rc; + + rc = create_irq(); + if (rc < 0) { + netdev_err(dev, "create_irq failed: %d\n", rc); + return rc; + } + ingress_irq = rc; + tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU); + rc = request_irq(ingress_irq, tile_net_handle_ingress_irq, + 0, NULL, NULL); + if (rc != 0) { + netdev_err(dev, "request_irq failed: %d\n", rc); + destroy_irq(ingress_irq); + ingress_irq = -1; + return rc; + } + + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + if (info->has_iqueue) { + gxio_mpipe_request_notif_ring_interrupt( + &context, cpu_x(cpu), cpu_y(cpu), + 1, ingress_irq, info->iqueue.ring); + } + } + + return 0; +} + +/* Undo any state set up partially by a failed call to tile_net_init_mpipe. */ +static void tile_net_init_mpipe_fail(void) +{ + int cpu; + + /* Do cleanups that require the mpipe context first. */ + if (small_buffer_stack >= 0) + tile_net_pop_all_buffers(small_buffer_stack); + if (large_buffer_stack >= 0) + tile_net_pop_all_buffers(large_buffer_stack); + + /* Destroy mpipe context so the hardware no longer owns any memory. */ + gxio_mpipe_destroy(&context); + + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + free_pages((unsigned long)(info->comps_for_echannel[0]), + get_order(COMPS_SIZE)); + info->comps_for_echannel[0] = NULL; + free_pages((unsigned long)(info->iqueue.idescs), + get_order(NOTIF_RING_SIZE)); + info->iqueue.idescs = NULL; + } + + if (small_buffer_stack_va) + free_pages_exact(small_buffer_stack_va, buffer_stack_size); + if (large_buffer_stack_va) + free_pages_exact(large_buffer_stack_va, buffer_stack_size); + + small_buffer_stack_va = NULL; + large_buffer_stack_va = NULL; + large_buffer_stack = -1; + small_buffer_stack = -1; + first_bucket = -1; +} + +/* The first time any tilegx network device is opened, we initialize + * the global mpipe state. If this step fails, we fail to open the + * device, but if it succeeds, we never need to do it again, and since + * tile_net can't be unloaded, we never undo it. + * + * Note that some resources in this path (buffer stack indices, + * bindings from init_buffer_stack, etc.) are hypervisor resources + * that are freed implicitly by gxio_mpipe_destroy(). + */ +static int tile_net_init_mpipe(struct net_device *dev) +{ + int i, num_buffers, rc; + int cpu; + int first_ring, ring; + int network_cpus_count = cpus_weight(network_cpus_map); + + if (!hash_default) { + netdev_err(dev, "Networking requires hash_default!\n"); + return -EIO; + } + + rc = gxio_mpipe_init(&context, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_init failed: %d\n", rc); + return -EIO; + } + + /* Set up the buffer stacks. */ + num_buffers = + network_cpus_count * (IQUEUE_ENTRIES + TILE_NET_BATCH); + rc = init_buffer_stacks(dev, num_buffers); + if (rc != 0) + goto fail; + + /* Provide initial buffers. */ + rc = -ENOMEM; + for (i = 0; i < num_buffers; i++) { + if (!tile_net_provide_buffer(true)) { + netdev_err(dev, "Cannot allocate initial sk_bufs!\n"); + goto fail; + } + } + for (i = 0; i < num_buffers; i++) { + if (!tile_net_provide_buffer(false)) { + netdev_err(dev, "Cannot allocate initial sk_bufs!\n"); + goto fail; + } + } + + /* Allocate one NotifRing for each network cpu. */ + rc = gxio_mpipe_alloc_notif_rings(&context, network_cpus_count, 0, 0); + if (rc < 0) { + netdev_err(dev, "gxio_mpipe_alloc_notif_rings failed %d\n", + rc); + goto fail; + } + + /* Init NotifRings per-cpu. */ + first_ring = rc; + ring = first_ring; + for_each_online_cpu(cpu) { + rc = alloc_percpu_mpipe_resources(dev, cpu, ring); + if (rc < 0) + goto fail; + ring = rc; + } + + /* Initialize NotifGroup and buckets. */ + rc = init_notif_group_and_buckets(dev, first_ring, network_cpus_count); + if (rc != 0) + goto fail; + + /* Create and enable interrupts. */ + rc = tile_net_setup_interrupts(dev); + if (rc != 0) + goto fail; + + return 0; + +fail: + tile_net_init_mpipe_fail(); + return rc; +} + +/* Create persistent egress info for a given egress channel. + * Note that this may be shared between, say, "gbe0" and "xgbe0". + * ISSUE: Defer header allocation until TSO is actually needed? + */ +static int tile_net_init_egress(struct net_device *dev, int echannel) +{ + struct page *headers_page, *edescs_page, *equeue_page; + gxio_mpipe_edesc_t *edescs; + gxio_mpipe_equeue_t *equeue; + unsigned char *headers; + int headers_order, edescs_order, equeue_order; + size_t edescs_size; + int edma; + int rc = -ENOMEM; + + /* Only initialize once. */ + if (egress_for_echannel[echannel].equeue != NULL) + return 0; + + /* Allocate memory for the "headers". */ + headers_order = get_order(EQUEUE_ENTRIES * HEADER_BYTES); + headers_page = alloc_pages(GFP_KERNEL, headers_order); + if (headers_page == NULL) { + netdev_warn(dev, + "Could not alloc %zd bytes for TSO headers.\n", + PAGE_SIZE << headers_order); + goto fail; + } + headers = pfn_to_kaddr(page_to_pfn(headers_page)); + + /* Allocate memory for the "edescs". */ + edescs_size = EQUEUE_ENTRIES * sizeof(*edescs); + edescs_order = get_order(edescs_size); + edescs_page = alloc_pages(GFP_KERNEL, edescs_order); + if (edescs_page == NULL) { + netdev_warn(dev, + "Could not alloc %zd bytes for eDMA ring.\n", + edescs_size); + goto fail_headers; + } + edescs = pfn_to_kaddr(page_to_pfn(edescs_page)); + + /* Allocate memory for the "equeue". */ + equeue_order = get_order(sizeof(*equeue)); + equeue_page = alloc_pages(GFP_KERNEL, equeue_order); + if (equeue_page == NULL) { + netdev_warn(dev, + "Could not alloc %zd bytes for equeue info.\n", + PAGE_SIZE << equeue_order); + goto fail_edescs; + } + equeue = pfn_to_kaddr(page_to_pfn(equeue_page)); + + /* Allocate an edma ring. Note that in practice this can't + * fail, which is good, because we will leak an edma ring if so. + */ + rc = gxio_mpipe_alloc_edma_rings(&context, 1, 0, 0); + if (rc < 0) { + netdev_warn(dev, "gxio_mpipe_alloc_edma_rings failed: %d\n", + rc); + goto fail_equeue; + } + edma = rc; + + /* Initialize the equeue. */ + rc = gxio_mpipe_equeue_init(equeue, &context, edma, echannel, + edescs, edescs_size, 0); + if (rc != 0) { + netdev_err(dev, "gxio_mpipe_equeue_init failed: %d\n", rc); + goto fail_equeue; + } + + /* Done. */ + egress_for_echannel[echannel].equeue = equeue; + egress_for_echannel[echannel].headers = headers; + return 0; + +fail_equeue: + __free_pages(equeue_page, equeue_order); + +fail_edescs: + __free_pages(edescs_page, edescs_order); + +fail_headers: + __free_pages(headers_page, headers_order); + +fail: + return rc; +} + +/* Return channel number for a newly-opened link. */ +static int tile_net_link_open(struct net_device *dev, gxio_mpipe_link_t *link, + const char *link_name) +{ + int rc = gxio_mpipe_link_open(link, &context, link_name, 0); + if (rc < 0) { + netdev_err(dev, "Failed to open '%s'\n", link_name); + return rc; + } + rc = gxio_mpipe_link_channel(link); + if (rc < 0 || rc >= TILE_NET_CHANNELS) { + netdev_err(dev, "gxio_mpipe_link_channel bad value: %d\n", rc); + gxio_mpipe_link_close(link); + return -EINVAL; + } + return rc; +} + +/* Help the kernel activate the given network interface. */ +static int tile_net_open(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int cpu, rc; + + mutex_lock(&tile_net_devs_for_channel_mutex); + + /* Do one-time initialization the first time any device is opened. */ + if (ingress_irq < 0) { + rc = tile_net_init_mpipe(dev); + if (rc != 0) + goto fail; + } + + /* Determine if this is the "loopify" device. */ + if (unlikely((loopify_link_name != NULL) && + !strcmp(dev->name, loopify_link_name))) { + rc = tile_net_link_open(dev, &priv->link, "loop0"); + if (rc < 0) + goto fail; + priv->channel = rc; + rc = tile_net_link_open(dev, &priv->loopify_link, "loop1"); + if (rc < 0) + goto fail; + priv->loopify_channel = rc; + priv->echannel = rc; + } else { + rc = tile_net_link_open(dev, &priv->link, dev->name); + if (rc < 0) + goto fail; + priv->channel = rc; + priv->echannel = rc; + } + + /* Initialize egress info (if needed). Once ever, per echannel. */ + rc = tile_net_init_egress(dev, priv->echannel); + if (rc != 0) + goto fail; + + tile_net_devs_for_channel[priv->channel] = dev; + + rc = tile_net_update(dev); + if (rc != 0) + goto fail; + + mutex_unlock(&tile_net_devs_for_channel_mutex); + + /* Initialize the transmit wake timer for this device for each cpu. */ + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + struct tile_net_tx_wake *tx_wake = + &info->tx_wake[priv->echannel]; + + hrtimer_init(&tx_wake->timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + tx_wake->timer.function = tile_net_handle_tx_wake_timer; + tx_wake->dev = dev; + } + + for_each_online_cpu(cpu) + netif_start_subqueue(dev, cpu); + netif_carrier_on(dev); + return 0; + +fail: + if (priv->loopify_channel >= 0) { + if (gxio_mpipe_link_close(&priv->loopify_link) != 0) + netdev_warn(dev, "Failed to close loopify link!\n"); + priv->loopify_channel = -1; + } + if (priv->channel >= 0) { + if (gxio_mpipe_link_close(&priv->link) != 0) + netdev_warn(dev, "Failed to close link!\n"); + priv->channel = -1; + } + priv->echannel = -1; + tile_net_devs_for_channel[priv->channel] = NULL; + mutex_unlock(&tile_net_devs_for_channel_mutex); + + /* Don't return raw gxio error codes to generic Linux. */ + return (rc > -512) ? rc : -EIO; +} + +/* Help the kernel deactivate the given network interface. */ +static int tile_net_stop(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int cpu; + + for_each_online_cpu(cpu) { + struct tile_net_info *info = &per_cpu(per_cpu_info, cpu); + struct tile_net_tx_wake *tx_wake = + &info->tx_wake[priv->echannel]; + + hrtimer_cancel(&tx_wake->timer); + netif_stop_subqueue(dev, cpu); + } + + mutex_lock(&tile_net_devs_for_channel_mutex); + tile_net_devs_for_channel[priv->channel] = NULL; + (void)tile_net_update(dev); + if (priv->loopify_channel >= 0) { + if (gxio_mpipe_link_close(&priv->loopify_link) != 0) + netdev_warn(dev, "Failed to close loopify link!\n"); + priv->loopify_channel = -1; + } + if (priv->channel >= 0) { + if (gxio_mpipe_link_close(&priv->link) != 0) + netdev_warn(dev, "Failed to close link!\n"); + priv->channel = -1; + } + priv->echannel = -1; + mutex_unlock(&tile_net_devs_for_channel_mutex); + + return 0; +} + +/* Determine the VA for a fragment. */ +static inline void *tile_net_frag_buf(skb_frag_t *f) +{ + unsigned long pfn = page_to_pfn(skb_frag_page(f)); + return pfn_to_kaddr(pfn) + f->page_offset; +} + +/* Acquire a completion entry and an egress slot, or if we can't, + * stop the queue and schedule the tx_wake timer. + */ +static s64 tile_net_equeue_try_reserve(struct net_device *dev, + struct tile_net_comps *comps, + gxio_mpipe_equeue_t *equeue, + int num_edescs) +{ + /* Try to acquire a completion entry. */ + if (comps->comp_next - comps->comp_last < TILE_NET_MAX_COMPS - 1 || + tile_net_free_comps(equeue, comps, 32, false) != 0) { + + /* Try to acquire an egress slot. */ + s64 slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs); + if (slot >= 0) + return slot; + + /* Freeing some completions gives the equeue time to drain. */ + tile_net_free_comps(equeue, comps, TILE_NET_MAX_COMPS, false); + + slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs); + if (slot >= 0) + return slot; + } + + /* Still nothing; give up and stop the queue for a short while. */ + netif_stop_subqueue(dev, smp_processor_id()); + tile_net_schedule_tx_wake_timer(dev); + return -1; +} + +/* Determine how many edesc's are needed for TSO. + * + * Sometimes, if "sendfile()" requires copying, we will be called with + * "data" containing the header and payload, with "frags" being empty. + * Sometimes, for example when using NFS over TCP, a single segment can + * span 3 fragments. This requires special care. + */ +static int tso_count_edescs(struct sk_buff *skb) +{ + struct skb_shared_info *sh = skb_shinfo(skb); + unsigned int data_len = skb->data_len; + unsigned int p_len = sh->gso_size; + long f_id = -1; /* id of the current fragment */ + long f_size = -1; /* size of the current fragment */ + long f_used = -1; /* bytes used from the current fragment */ + long n; /* size of the current piece of payload */ + int num_edescs = 0; + int segment; + + for (segment = 0; segment < sh->gso_segs; segment++) { + + unsigned int p_used = 0; + + /* One edesc for header and for each piece of the payload. */ + for (num_edescs++; p_used < p_len; num_edescs++) { + + /* Advance as needed. */ + while (f_used >= f_size) { + f_id++; + f_size = sh->frags[f_id].size; + f_used = 0; + } + + /* Use bytes from the current fragment. */ + n = p_len - p_used; + if (n > f_size - f_used) + n = f_size - f_used; + f_used += n; + p_used += n; + } + + /* The last segment may be less than gso_size. */ + data_len -= p_len; + if (data_len < p_len) + p_len = data_len; + } + + return num_edescs; +} + +/* Prepare modified copies of the skbuff headers. + * FIXME: add support for IPv6. + */ +static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, + s64 slot) +{ + struct skb_shared_info *sh = skb_shinfo(skb); + struct iphdr *ih; + struct tcphdr *th; + unsigned int data_len = skb->data_len; + unsigned char *data = skb->data; + unsigned int ih_off, th_off, sh_len, p_len; + unsigned int isum_seed, tsum_seed, id, seq; + long f_id = -1; /* id of the current fragment */ + long f_size = -1; /* size of the current fragment */ + long f_used = -1; /* bytes used from the current fragment */ + long n; /* size of the current piece of payload */ + int segment; + + /* Locate original headers and compute various lengths. */ + ih = ip_hdr(skb); + th = tcp_hdr(skb); + ih_off = skb_network_offset(skb); + th_off = skb_transport_offset(skb); + sh_len = th_off + tcp_hdrlen(skb); + p_len = sh->gso_size; + + /* Set up seed values for IP and TCP csum and initialize id and seq. */ + isum_seed = ((0xFFFF - ih->check) + + (0xFFFF - ih->tot_len) + + (0xFFFF - ih->id)); + tsum_seed = th->check + (0xFFFF ^ htons(skb->len)); + id = ntohs(ih->id); + seq = ntohl(th->seq); + + /* Prepare all the headers. */ + for (segment = 0; segment < sh->gso_segs; segment++) { + unsigned char *buf; + unsigned int p_used = 0; + + /* Copy to the header memory for this segment. */ + buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES + + NET_IP_ALIGN; + memcpy(buf, data, sh_len); + + /* Update copied ip header. */ + ih = (struct iphdr *)(buf + ih_off); + ih->tot_len = htons(sh_len + p_len - ih_off); + ih->id = htons(id); + ih->check = csum_long(isum_seed + ih->tot_len + + ih->id) ^ 0xffff; + + /* Update copied tcp header. */ + th = (struct tcphdr *)(buf + th_off); + th->seq = htonl(seq); + th->check = csum_long(tsum_seed + htons(sh_len + p_len)); + if (segment != sh->gso_segs - 1) { + th->fin = 0; + th->psh = 0; + } + + /* Skip past the header. */ + slot++; + + /* Skip past the payload. */ + while (p_used < p_len) { + + /* Advance as needed. */ + while (f_used >= f_size) { + f_id++; + f_size = sh->frags[f_id].size; + f_used = 0; + } + + /* Use bytes from the current fragment. */ + n = p_len - p_used; + if (n > f_size - f_used) + n = f_size - f_used; + f_used += n; + p_used += n; + + slot++; + } + + id++; + seq += p_len; + + /* The last segment may be less than gso_size. */ + data_len -= p_len; + if (data_len < p_len) + p_len = data_len; + } + + /* Flush the headers so they are ready for hardware DMA. */ + wmb(); +} + +/* Pass all the data to mpipe for egress. */ +static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, + struct sk_buff *skb, unsigned char *headers, s64 slot) +{ + struct tile_net_priv *priv = netdev_priv(dev); + struct skb_shared_info *sh = skb_shinfo(skb); + unsigned int data_len = skb->data_len; + unsigned int p_len = sh->gso_size; + gxio_mpipe_edesc_t edesc_head = { { 0 } }; + gxio_mpipe_edesc_t edesc_body = { { 0 } }; + long f_id = -1; /* id of the current fragment */ + long f_size = -1; /* size of the current fragment */ + long f_used = -1; /* bytes used from the current fragment */ + long n; /* size of the current piece of payload */ + unsigned long tx_packets = 0, tx_bytes = 0; + unsigned int csum_start, sh_len; + int segment; + + /* Prepare to egress the headers: set up header edesc. */ + csum_start = skb_checksum_start_offset(skb); + sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + edesc_head.csum = 1; + edesc_head.csum_start = csum_start; + edesc_head.csum_dest = csum_start + skb->csum_offset; + edesc_head.xfer_size = sh_len; + + /* This is only used to specify the TLB. */ + edesc_head.stack_idx = large_buffer_stack; + edesc_body.stack_idx = large_buffer_stack; + + /* Egress all the edescs. */ + for (segment = 0; segment < sh->gso_segs; segment++) { + void *va; + unsigned char *buf; + unsigned int p_used = 0; + + /* Egress the header. */ + buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES + + NET_IP_ALIGN; + edesc_head.va = va_to_tile_io_addr(buf); + gxio_mpipe_equeue_put_at(equeue, edesc_head, slot); + slot++; + + /* Egress the payload. */ + while (p_used < p_len) { + + /* Advance as needed. */ + while (f_used >= f_size) { + f_id++; + f_size = sh->frags[f_id].size; + f_used = 0; + } + + va = tile_net_frag_buf(&sh->frags[f_id]) + f_used; + + /* Use bytes from the current fragment. */ + n = p_len - p_used; + if (n > f_size - f_used) + n = f_size - f_used; + f_used += n; + p_used += n; + + /* Egress a piece of the payload. */ + edesc_body.va = va_to_tile_io_addr(va); + edesc_body.xfer_size = n; + edesc_body.bound = !(p_used < p_len); + gxio_mpipe_equeue_put_at(equeue, edesc_body, slot); + slot++; + } + + tx_packets++; + tx_bytes += sh_len + p_len; + + /* The last segment may be less than gso_size. */ + data_len -= p_len; + if (data_len < p_len) + p_len = data_len; + } + + /* Update stats. */ + tile_net_stats_add(tx_packets, &priv->stats.tx_packets); + tile_net_stats_add(tx_bytes, &priv->stats.tx_bytes); +} + +/* Do "TSO" handling for egress. + * + * Normally drivers set NETIF_F_TSO only to support hardware TSO; + * otherwise the stack uses scatter-gather to implement GSO in software. + * On our testing, enabling GSO support (via NETIF_F_SG) drops network + * performance down to around 7.5 Gbps on the 10G interfaces, although + * also dropping cpu utilization way down, to under 8%. But + * implementing "TSO" in the driver brings performance back up to line + * rate, while dropping cpu usage even further, to less than 4%. In + * practice, profiling of GSO shows that skb_segment() is what causes + * the performance overheads; we benefit in the driver from using + * preallocated memory to duplicate the TCP/IP headers. + */ +static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + int channel = priv->echannel; + struct tile_net_egress *egress = &egress_for_echannel[channel]; + struct tile_net_comps *comps = info->comps_for_echannel[channel]; + gxio_mpipe_equeue_t *equeue = egress->equeue; + unsigned long irqflags; + int num_edescs; + s64 slot; + + /* Determine how many mpipe edesc's are needed. */ + num_edescs = tso_count_edescs(skb); + + local_irq_save(irqflags); + + /* Try to acquire a completion entry and an egress slot. */ + slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs); + if (slot < 0) { + local_irq_restore(irqflags); + return NETDEV_TX_BUSY; + } + + /* Set up copies of header data properly. */ + tso_headers_prepare(skb, egress->headers, slot); + + /* Actually pass the data to the network hardware. */ + tso_egress(dev, equeue, skb, egress->headers, slot); + + /* Add a completion record. */ + add_comp(equeue, comps, slot + num_edescs - 1, skb); + + local_irq_restore(irqflags); + + /* Make sure the egress timer is scheduled. */ + tile_net_schedule_egress_timer(); + + return NETDEV_TX_OK; +} + +/* Analyze the body and frags for a transmit request. */ +static unsigned int tile_net_tx_frags(struct frag *frags, + struct sk_buff *skb, + void *b_data, unsigned int b_len) +{ + unsigned int i, n = 0; + + struct skb_shared_info *sh = skb_shinfo(skb); + + if (b_len != 0) { + frags[n].buf = b_data; + frags[n++].length = b_len; + } + + for (i = 0; i < sh->nr_frags; i++) { + skb_frag_t *f = &sh->frags[i]; + frags[n].buf = tile_net_frag_buf(f); + frags[n++].length = skb_frag_size(f); + } + + return n; +} + +/* Help the kernel transmit a packet. */ +static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + struct tile_net_priv *priv = netdev_priv(dev); + struct tile_net_egress *egress = &egress_for_echannel[priv->echannel]; + gxio_mpipe_equeue_t *equeue = egress->equeue; + struct tile_net_comps *comps = + info->comps_for_echannel[priv->echannel]; + unsigned int len = skb->len; + unsigned char *data = skb->data; + unsigned int num_edescs; + struct frag frags[MAX_FRAGS]; + gxio_mpipe_edesc_t edescs[MAX_FRAGS]; + unsigned long irqflags; + gxio_mpipe_edesc_t edesc = { { 0 } }; + unsigned int i; + s64 slot; + + if (skb_is_gso(skb)) + return tile_net_tx_tso(skb, dev); + + num_edescs = tile_net_tx_frags(frags, skb, data, skb_headlen(skb)); + + /* This is only used to specify the TLB. */ + edesc.stack_idx = large_buffer_stack; + + /* Prepare the edescs. */ + for (i = 0; i < num_edescs; i++) { + edesc.xfer_size = frags[i].length; + edesc.va = va_to_tile_io_addr(frags[i].buf); + edescs[i] = edesc; + } + + /* Mark the final edesc. */ + edescs[num_edescs - 1].bound = 1; + + /* Add checksum info to the initial edesc, if needed. */ + if (skb->ip_summed == CHECKSUM_PARTIAL) { + unsigned int csum_start = skb_checksum_start_offset(skb); + edescs[0].csum = 1; + edescs[0].csum_start = csum_start; + edescs[0].csum_dest = csum_start + skb->csum_offset; + } + + local_irq_save(irqflags); + + /* Try to acquire a completion entry and an egress slot. */ + slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs); + if (slot < 0) { + local_irq_restore(irqflags); + return NETDEV_TX_BUSY; + } + + for (i = 0; i < num_edescs; i++) + gxio_mpipe_equeue_put_at(equeue, edescs[i], slot++); + + /* Add a completion record. */ + add_comp(equeue, comps, slot - 1, skb); + + /* NOTE: Use ETH_ZLEN for short packets (e.g. 42 < 60). */ + tile_net_stats_add(1, &priv->stats.tx_packets); + tile_net_stats_add(max_t(unsigned int, len, ETH_ZLEN), + &priv->stats.tx_bytes); + + local_irq_restore(irqflags); + + /* Make sure the egress timer is scheduled. */ + tile_net_schedule_egress_timer(); + + return NETDEV_TX_OK; +} + +/* Return subqueue id on this core (one per core). */ +static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + return smp_processor_id(); +} + +/* Deal with a transmit timeout. */ +static void tile_net_tx_timeout(struct net_device *dev) +{ + int cpu; + + for_each_online_cpu(cpu) + netif_wake_subqueue(dev, cpu); +} + +/* Ioctl commands. */ +static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + return -EOPNOTSUPP; +} + +/* Get system network statistics for device. */ +static struct net_device_stats *tile_net_get_stats(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + return &priv->stats; +} + +/* Change the MTU. */ +static int tile_net_change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 68) || (new_mtu > 1500)) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +/* Change the Ethernet address of the NIC. + * + * The hypervisor driver does not support changing MAC address. However, + * the hardware does not do anything with the MAC address, so the address + * which gets used on outgoing packets, and which is accepted on incoming + * packets, is completely up to us. + * + * Returns 0 on success, negative on failure. + */ +static int tile_net_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void tile_net_netpoll(struct net_device *dev) +{ + disable_percpu_irq(ingress_irq); + tile_net_handle_ingress_irq(ingress_irq, NULL); + enable_percpu_irq(ingress_irq, 0); +} +#endif + +static const struct net_device_ops tile_net_ops = { + .ndo_open = tile_net_open, + .ndo_stop = tile_net_stop, + .ndo_start_xmit = tile_net_tx, + .ndo_select_queue = tile_net_select_queue, + .ndo_do_ioctl = tile_net_ioctl, + .ndo_get_stats = tile_net_get_stats, + .ndo_change_mtu = tile_net_change_mtu, + .ndo_tx_timeout = tile_net_tx_timeout, + .ndo_set_mac_address = tile_net_set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tile_net_netpoll, +#endif +}; + +/* The setup function. + * + * This uses ether_setup() to assign various fields in dev, including + * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields. + */ +static void tile_net_setup(struct net_device *dev) +{ + ether_setup(dev); + dev->netdev_ops = &tile_net_ops; + dev->watchdog_timeo = TILE_NET_TIMEOUT; + dev->features |= NETIF_F_LLTX; + dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_SG; + dev->features |= NETIF_F_TSO; + dev->mtu = 1500; +} + +/* Allocate the device structure, register the device, and obtain the + * MAC address from the hypervisor. + */ +static void tile_net_dev_init(const char *name, const uint8_t *mac) +{ + int ret; + int i; + int nz_addr = 0; + struct net_device *dev; + struct tile_net_priv *priv; + + /* HACK: Ignore "loop" links. */ + if (strncmp(name, "loop", 4) == 0) + return; + + /* Allocate the device structure. Normally, "name" is a + * template, instantiated by register_netdev(), but not for us. + */ + dev = alloc_netdev_mqs(sizeof(*priv), name, tile_net_setup, + NR_CPUS, 1); + if (!dev) { + pr_err("alloc_netdev_mqs(%s) failed\n", name); + return; + } + + /* Initialize "priv". */ + priv = netdev_priv(dev); + memset(priv, 0, sizeof(*priv)); + priv->dev = dev; + priv->channel = -1; + priv->loopify_channel = -1; + priv->echannel = -1; + + /* Get the MAC address and set it in the device struct; this must + * be done before the device is opened. If the MAC is all zeroes, + * we use a random address, since we're probably on the simulator. + */ + for (i = 0; i < 6; i++) + nz_addr |= mac[i]; + + if (nz_addr) { + memcpy(dev->dev_addr, mac, 6); + dev->addr_len = 6; + } else { + random_ether_addr(dev->dev_addr); + } + + /* Register the network device. */ + ret = register_netdev(dev); + if (ret) { + netdev_err(dev, "register_netdev failed %d\n", ret); + free_netdev(dev); + return; + } +} + +/* Per-cpu module initialization. */ +static void tile_net_init_module_percpu(void *unused) +{ + struct tile_net_info *info = &__get_cpu_var(per_cpu_info); + int my_cpu = smp_processor_id(); + + info->has_iqueue = false; + + info->my_cpu = my_cpu; + + /* Initialize the egress timer. */ + hrtimer_init(&info->egress_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + info->egress_timer.function = tile_net_handle_egress_timer; +} + +/* Module initialization. */ +static int __init tile_net_init_module(void) +{ + int i; + char name[GXIO_MPIPE_LINK_NAME_LEN]; + uint8_t mac[6]; + + pr_info("Tilera Network Driver\n"); + + mutex_init(&tile_net_devs_for_channel_mutex); + + /* Initialize each CPU. */ + on_each_cpu(tile_net_init_module_percpu, NULL, 1); + + /* Find out what devices we have, and initialize them. */ + for (i = 0; gxio_mpipe_link_enumerate_mac(i, name, mac) >= 0; i++) + tile_net_dev_init(name, mac); + + if (!network_cpus_init()) + network_cpus_map = *cpu_online_mask; + + return 0; +} + +module_init(tile_net_init_module); |
