summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c158
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c13
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c10
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c3
-rw-r--r--drivers/net/ethernet/nxp/lpc_eth.c1
5 files changed, 128 insertions, 57 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index e2e45ee5df33..6dd0dd076cc5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -137,7 +137,16 @@
#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
-
+#define LINK_UPDATE_MASK \
+ (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
+ LINK_STATUS_LINK_UP | \
+ LINK_STATUS_PHYSICAL_LINK_FLAG | \
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
+ LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
+ LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
+ LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
@@ -3295,6 +3304,21 @@ static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port)
DEFAULT_PHY_DEV_ADDR);
}
+static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u32 action)
+{
+ struct bnx2x *bp = params->bp;
+ switch (action) {
+ case PHY_INIT:
+ /* Set correct devad */
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0);
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+ phy->def_md_devad);
+ break;
+ }
+}
+
static void bnx2x_xgxs_deassert(struct link_params *params)
{
struct bnx2x *bp = params->bp;
@@ -3309,10 +3333,8 @@ static void bnx2x_xgxs_deassert(struct link_params *params)
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
udelay(500);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
-
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0);
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
- params->phy[INT_PHY].def_md_devad);
+ bnx2x_xgxs_specific_func(&params->phy[INT_PHY], params,
+ PHY_INIT);
}
static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
@@ -3545,14 +3567,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars) {
- u16 val16 = 0, lane, i;
+ u16 lane, i, cl72_ctrl, an_adv = 0;
+ u16 ucode_ver;
struct bnx2x *bp = params->bp;
static struct bnx2x_reg_set reg_set[] = {
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
{MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
@@ -3565,12 +3584,19 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
+ cl72_ctrl &= 0xf8ff;
+ cl72_ctrl |= 0x3800;
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
+
/* Check adding advertisement for 1G KX */
if (((vars->line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
(vars->line_speed == SPEED_1000)) {
u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
- val16 |= (1<<5);
+ an_adv |= (1<<5);
/* Enable CL37 1G Parallel Detect */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1);
@@ -3580,11 +3606,14 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(vars->line_speed == SPEED_10000)) {
/* Check adding advertisement for 10G KR */
- val16 |= (1<<7);
+ an_adv |= (1<<7);
/* Enable 10G Parallel Detect */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
-
+ bnx2x_set_aer_mmd(params, phy);
DP(NETIF_MSG_LINK, "Advertize 10G\n");
}
@@ -3604,7 +3633,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
/* Advertised speeds */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);
/* Advertised and set FEC (Forward Error Correction) */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
@@ -3628,9 +3657,10 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
/* Set KR Autoneg Work-Around flag for Warpcore version older than D108
*/
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
- if (val16 < 0xd108) {
- DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
+ MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver);
+ if (ucode_ver < 0xd108) {
+ DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n",
+ ucode_ver);
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
}
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
@@ -3651,21 +3681,16 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u16 i;
+ u16 val16, i, lane;
static struct bnx2x_reg_set reg_set[] = {
/* Disable Autoneg */
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
0x3f00},
{MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
- /* Disable CL36 PCS Tx */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0},
- /* Double Wide Single Data Rate @ pll rate */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF},
/* Leave cl72 training enable, needed for KR */
{MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
@@ -3676,11 +3701,24 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- /* Leave CL72 enabled */
- bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
- 0x3800);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Global registers */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 &= ~(0x0011 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 |= (0x0303 << (lane << 1));
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
/* Set speed via PMA/PMD register */
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);
@@ -4303,7 +4341,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u16 val16;
+ u16 val16, lane;
bnx2x_sfp_e3_set_transmitter(params, phy, 0);
bnx2x_set_mdio_clk(bp, params->chip_id, params->port);
bnx2x_set_aer_mmd(params, phy);
@@ -4340,6 +4378,30 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
MDIO_WC_REG_XGXSBLK1_LANECTRL2,
val16 & 0xff00);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 |= (0x11 << lane);
+ if (phy->flags & FLAGS_WC_DUAL_MODE)
+ val16 |= (0x22 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 &= ~(0x0303 << (lane << 1));
+ val16 |= (0x0101 << (lane << 1));
+ if (phy->flags & FLAGS_WC_DUAL_MODE) {
+ val16 &= ~(0x0c0c << (lane << 1));
+ val16 |= (0x0404 << (lane << 1));
+ }
+
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
+
}
static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
@@ -6296,15 +6358,7 @@ static int bnx2x_update_link_down(struct link_params *params,
vars->mac_type = MAC_TYPE_NONE;
/* Update shared memory */
- vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
- LINK_STATUS_LINK_UP |
- LINK_STATUS_PHYSICAL_LINK_FLAG |
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
- LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK |
- LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE |
- LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE);
+ vars->link_status &= ~LINK_UPDATE_MASK;
vars->line_speed = 0;
bnx2x_update_mng(params, vars->link_status);
@@ -6452,6 +6506,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
u8 active_external_phy = INT_PHY;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
+ vars->link_status &= ~LINK_UPDATE_MASK;
for (phy_index = INT_PHY; phy_index < params->num_phys;
phy_index++) {
phy_vars[phy_index].flow_ctrl = 0;
@@ -7579,7 +7634,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params,
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
- u8 *o_buf)
+ u8 *o_buf, u8 is_init)
{
int rc = 0;
u8 i, j = 0, cnt = 0;
@@ -7596,10 +7651,10 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
- if (cnt == I2C_WA_PWR_ITER) {
+ if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
bnx2x_warpcore_power_module(params, phy, 0);
/* Note that 100us are not enough here */
- usleep_range(1000,1000);
+ usleep_range(1000, 2000);
bnx2x_warpcore_power_module(params, phy, 1);
}
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
@@ -7719,7 +7774,7 @@ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
- byte_cnt, o_buf);
+ byte_cnt, o_buf, 0);
break;
}
return rc;
@@ -7923,6 +7978,7 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
{
u8 val;
+ int rc;
struct bnx2x *bp = params->bp;
u16 timeout;
/* Initialization time after hot-plug may take up to 300ms for
@@ -7930,8 +7986,14 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
*/
for (timeout = 0; timeout < 60; timeout++) {
- if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
- == 0) {
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ rc = bnx2x_warpcore_read_sfp_module_eeprom(phy,
+ params, 1,
+ 1, &val, 1);
+ else
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1,
+ &val);
+ if (rc == 0) {
DP(NETIF_MSG_LINK,
"SFP+ module initialization took %d ms\n",
timeout * 5);
@@ -7939,7 +8001,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
}
usleep_range(5000, 10000);
}
- return -EINVAL;
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val);
+ return rc;
}
static void bnx2x_8727_power_module(struct bnx2x *bp,
@@ -10993,7 +11056,7 @@ static struct bnx2x_phy phy_xgxs = {
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
.set_link_led = (set_link_led_t)NULL,
- .phy_specific_func = (phy_specific_func_t)NULL
+ .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func
};
static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
@@ -11465,6 +11528,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
phy->media_type = ETH_PHY_BASE_T;
break;
case PORT_HW_CFG_NET_SERDES_IF_XFI:
+ phy->supported &= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
phy->media_type = ETH_PHY_XFP_FIBER;
break;
case PORT_HW_CFG_NET_SERDES_IF_SFI:
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d5648fc666bd..bd1fd3d87c24 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -6794,8 +6794,9 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
+ bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+
if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
- bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
if (IS_MF(bp))
low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
@@ -11902,7 +11903,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
/* disable FCOE L2 queue for E1x */
if (CHIP_IS_E1x(bp))
bp->flags |= NO_FCOE_FLAG;
-
+ /* disable FCOE for 57840 device, until FW supports it */
+ switch (ent->driver_data) {
+ case BCM57840_O:
+ case BCM57840_4_10:
+ case BCM57840_2_20:
+ case BCM57840_MFO:
+ case BCM57840_MF:
+ bp->flags |= NO_FCOE_FLAG;
+ }
#endif
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c1cde11b0c6d..0df1284df497 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3416,16 +3416,6 @@ static int adap_init0_config(struct adapter *adapter, int reset)
finicsum, cfcsum);
/*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-
- /*
* And now tell the firmware to use the configuration we just loaded.
*/
caps_cmd.op_to_write =
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 56b20d17d0e4..116f0e901bee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2673,6 +2673,9 @@ static int ixgbe_get_ts_info(struct net_device *dev,
case ixgbe_mac_X540:
case ixgbe_mac_82599EB:
info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 53743f7a2ca9..af8b4142088c 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1524,6 +1524,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev)
pldat->dma_buff_base_p);
free_irq(ndev->irq, ndev);
iounmap(pldat->net_base);
+ mdiobus_unregister(pldat->mii_bus);
mdiobus_free(pldat->mii_bus);
clk_disable(pldat->clk);
clk_put(pldat->clk);
OpenPOWER on IntegriCloud