summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igb/e1000_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_phy.c')
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_phy.c76
1 files changed, 2 insertions, 74 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index ad2b74d95138..4009bbab7407 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2013 Intel Corporation.
+ Copyright(c) 2007-2014 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -394,77 +393,6 @@ s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
}
/**
- * e1000_write_sfp_data_byte - Writes SFP module data.
- * @hw: pointer to the HW structure
- * @offset: byte location offset to write to
- * @data: data to write
- *
- * Writes one byte to SFP module data stored
- * in SFP resided EEPROM memory or SFP diagnostic area.
- * Function should be called with
- * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
- * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
- * access
- **/
-s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data)
-{
- u32 i = 0;
- u32 i2ccmd = 0;
- u32 data_local = 0;
-
- if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
- hw_dbg("I2CCMD command address exceeds upper limit\n");
- return -E1000_ERR_PHY;
- }
- /* The programming interface is 16 bits wide
- * so we need to read the whole word first
- * then update appropriate byte lane and write
- * the updated word back.
- */
- /* Set up Op-code, EEPROM Address,in the I2CCMD
- * register. The MAC will take care of interfacing
- * with an EEPROM to write the data given.
- */
- i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
- E1000_I2CCMD_OPCODE_READ);
- /* Set a command to read single word */
- wr32(E1000_I2CCMD, i2ccmd);
- for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
- udelay(50);
- /* Poll the ready bit to see if lastly
- * launched I2C operation completed
- */
- i2ccmd = rd32(E1000_I2CCMD);
- if (i2ccmd & E1000_I2CCMD_READY) {
- /* Check if this is READ or WRITE phase */
- if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) ==
- E1000_I2CCMD_OPCODE_READ) {
- /* Write the selected byte
- * lane and update whole word
- */
- data_local = i2ccmd & 0xFF00;
- data_local |= data;
- i2ccmd = ((offset <<
- E1000_I2CCMD_REG_ADDR_SHIFT) |
- E1000_I2CCMD_OPCODE_WRITE | data_local);
- wr32(E1000_I2CCMD, i2ccmd);
- } else {
- break;
- }
- }
- }
- if (!(i2ccmd & E1000_I2CCMD_READY)) {
- hw_dbg("I2CCMD Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (i2ccmd & E1000_I2CCMD_ERROR) {
- hw_dbg("I2CCMD Error bit set\n");
- return -E1000_ERR_PHY;
- }
- return 0;
-}
-
-/**
* igb_read_phy_reg_igp - Read igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
OpenPOWER on IntegriCloud