summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e')
-rw-r--r--drivers/net/e1000e/defines.h2
-rw-r--r--drivers/net/e1000e/e1000.h32
-rw-r--r--drivers/net/e1000e/ethtool.c46
-rw-r--r--drivers/net/e1000e/netdev.c427
-rw-r--r--drivers/net/e1000e/param.c56
5 files changed, 344 insertions, 219 deletions
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f823b8ba5785..14b0e6cd3b8d 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -389,7 +389,7 @@
/* Interrupt Cause Set */
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
/* Transmit Descriptor Control */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 4a4f62e002b2..ac4e506b4f88 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -41,24 +41,25 @@
struct e1000_info;
-#define ndev_printk(level, netdev, format, arg...) \
- printk(level "%s: " format, (netdev)->name, ## arg)
+#define e_printk(level, adapter, format, arg...) \
+ printk(level "%s: %s: " format, pci_name(adapter->pdev), \
+ adapter->netdev->name, ## arg)
#ifdef DEBUG
-#define ndev_dbg(netdev, format, arg...) \
- ndev_printk(KERN_DEBUG , netdev, format, ## arg)
+#define e_dbg(format, arg...) \
+ e_printk(KERN_DEBUG , adapter, format, ## arg)
#else
-#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0)
+#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
#endif
-#define ndev_err(netdev, format, arg...) \
- ndev_printk(KERN_ERR , netdev, format, ## arg)
-#define ndev_info(netdev, format, arg...) \
- ndev_printk(KERN_INFO , netdev, format, ## arg)
-#define ndev_warn(netdev, format, arg...) \
- ndev_printk(KERN_WARNING , netdev, format, ## arg)
-#define ndev_notice(netdev, format, arg...) \
- ndev_printk(KERN_NOTICE , netdev, format, ## arg)
+#define e_err(format, arg...) \
+ e_printk(KERN_ERR, adapter, format, ## arg)
+#define e_info(format, arg...) \
+ e_printk(KERN_INFO, adapter, format, ## arg)
+#define e_warn(format, arg...) \
+ e_printk(KERN_WARNING, adapter, format, ## arg)
+#define e_notice(format, arg...) \
+ e_printk(KERN_NOTICE, adapter, format, ## arg)
/* Tx/Rx descriptor defines */
@@ -283,10 +284,6 @@ struct e1000_adapter {
unsigned long led_status;
unsigned int flags;
-
- /* for ioport free */
- int bars;
- int need_ioport;
};
struct e1000_info {
@@ -329,6 +326,7 @@ struct e1000_info {
#define FLAG_RX_CSUM_ENABLED (1 << 28)
#define FLAG_TSO_FORCE (1 << 29)
#define FLAG_RX_RESTART_NOW (1 << 30)
+#define FLAG_MSI_TEST_FAILED (1 << 31)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 9350564065e7..e21c9e0f3738 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -177,7 +177,7 @@ static u32 e1000_get_link(struct net_device *netdev)
u32 status;
status = er32(STATUS);
- return (status & E1000_STATUS_LU);
+ return (status & E1000_STATUS_LU) ? 1 : 0;
}
static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
- "configuration\n");
+ e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
- "configuration\n");
+ e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev,
* cannot be changed
*/
if (e1000_check_reset_block(hw)) {
- ndev_err(netdev, "Cannot change link "
- "characteristics when SoL/IDER is active.\n");
+ e_err("Cannot change link characteristics when SoL/IDER is "
+ "active.\n");
return -EINVAL;
}
@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
netdev->features &= ~NETIF_F_TSO6;
}
- ndev_info(netdev, "TSO is %s\n",
- data ? "Enabled" : "Disabled");
+ e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->flags |= FLAG_TSO_FORCE;
return 0;
}
@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
(test[pat] & write));
val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
if (val != (test[pat] & write & mask)) {
- ndev_err(adapter->netdev, "pattern test reg %04X "
- "failed: got 0x%08X expected 0x%08X\n",
- reg + offset,
- val, (test[pat] & write & mask));
+ e_err("pattern test reg %04X failed: got 0x%08X "
+ "expected 0x%08X\n", reg + offset, val,
+ (test[pat] & write & mask));
*data = reg;
return 1;
}
@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
__ew32(&adapter->hw, reg, write & mask);
val = __er32(&adapter->hw, reg);
if ((write & mask) != (val & mask)) {
- ndev_err(adapter->netdev, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n", reg, (val & mask),
- (write & mask));
+ e_err("set/check reg %04X test failed: got 0x%08X "
+ "expected 0x%08X\n", reg, (val & mask), (write & mask));
*data = reg;
return 1;
}
@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
{
struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &adapter->hw.mac;
- struct net_device *netdev = adapter->netdev;
u32 value;
u32 before;
u32 after;
@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
ew32(STATUS, toggle);
after = er32(STATUS) & toggle;
if (value != after) {
- ndev_err(netdev, "failed STATUS register test got: "
- "0x%08X expected: 0x%08X\n", after, value);
+ e_err("failed STATUS register test got: 0x%08X expected: "
+ "0x%08X\n", after, value);
*data = 1;
return 1;
}
@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
*data = 1;
return -1;
}
- ndev_info(netdev, "testing %s interrupt\n",
- (shared_int ? "shared" : "unshared"));
+ e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
* sessions are active
*/
if (e1000_check_reset_block(&adapter->hw)) {
- ndev_err(adapter->netdev, "Cannot do PHY loopback test "
- "when SoL/IDER is active.\n");
+ e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
}
@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev,
forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
autoneg = adapter->hw.mac.autoneg;
- ndev_info(netdev, "offline testing starting\n");
+ e_info("offline testing starting\n");
/*
* Link test performed before hardware reset so autoneg doesn't
@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
- ndev_info(netdev, "online testing starting\n");
+ e_info("online testing starting\n");
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
- ndev_err(netdev, "Interface does not support "
- "directed (unicast) frame wake-up packets\n");
+ e_err("Interface does not support directed (unicast) "
+ "frame wake-up packets\n");
}
if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d13677899767..d266510c8a94 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
* packet, also make sure the frame isn't just CRC only */
if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
/* All receives must fit into a single buffer */
- ndev_dbg(netdev, "%s: Receive packet consumed "
- "multiple buffers\n", netdev->name);
+ e_dbg("%s: Receive packet consumed multiple buffers\n",
+ netdev->name);
/* recycle */
buffer_info->skb = skb;
goto next_desc;
@@ -510,9 +510,12 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
if (new_skb) {
skb_reserve(new_skb, NET_IP_ALIGN);
- memcpy(new_skb->data - NET_IP_ALIGN,
- skb->data - NET_IP_ALIGN,
- length + NET_IP_ALIGN);
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
/* save the skb in buffer_info as good */
buffer_info->skb = skb;
skb = new_skb;
@@ -576,28 +579,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
- struct net_device *netdev = adapter->netdev;
/* detected Tx unit hang */
- ndev_err(netdev,
- "Detected Tx Unit Hang:\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]:\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
- readl(adapter->hw.hw_addr + tx_ring->head),
- readl(adapter->hw.hw_addr + tx_ring->tail),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->upper.fields.status);
+ e_err("Detected Tx Unit Hang:\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]:\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ readl(adapter->hw.hw_addr + tx_ring->head),
+ readl(adapter->hw.hw_addr + tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
}
/**
@@ -747,8 +748,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
buffer_info->dma = 0;
if (!(staterr & E1000_RXD_STAT_EOP)) {
- ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
- "up the full packet\n", netdev->name);
+ e_dbg("%s: Packet Split buffers didn't pick up the "
+ "full packet\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -761,8 +762,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->wb.middle.length0);
if (!length) {
- ndev_dbg(netdev, "%s: Last part of the packet spanning"
- " multiple descriptors\n", netdev->name);
+ e_dbg("%s: Last part of the packet spanning multiple "
+ "descriptors\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -1011,7 +1012,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* eth type trans needs skb->data to point to something */
if (!pskb_may_pull(skb, ETH_HLEN)) {
- ndev_err(netdev, "pskb_may_pull failed.\n");
+ e_err("pskb_may_pull failed.\n");
dev_kfree_skb(skb);
goto next_desc;
}
@@ -1235,28 +1236,36 @@ static irqreturn_t e1000_intr(int irq, void *data)
return IRQ_HANDLED;
}
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
static int e1000_request_irq(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- irq_handler_t handler = e1000_intr;
int irq_flags = IRQF_SHARED;
int err;
- if (!pci_enable_msi(adapter->pdev)) {
- adapter->flags |= FLAG_MSI_ENABLED;
- handler = e1000_intr_msi;
- irq_flags = 0;
+ if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->flags |= FLAG_MSI_ENABLED;
+ irq_flags = 0;
+ }
}
- err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
- netdev);
+ err = request_irq(adapter->pdev->irq,
+ ((adapter->flags & FLAG_MSI_ENABLED) ?
+ &e1000_intr_msi : &e1000_intr),
+ irq_flags, netdev->name, netdev);
if (err) {
- ndev_err(netdev,
- "Unable to allocate %s interrupt (return: %d)\n",
- adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
- err);
- if (adapter->flags & FLAG_MSI_ENABLED)
+ if (adapter->flags & FLAG_MSI_ENABLED) {
pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~FLAG_MSI_ENABLED;
+ }
+ e_err("Unable to allocate interrupt, Error: %d\n", err);
}
return err;
@@ -1395,8 +1404,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
return 0;
err:
vfree(tx_ring->buffer_info);
- ndev_err(adapter->netdev,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
return err;
}
@@ -1450,8 +1458,7 @@ err_pages:
}
err:
vfree(rx_ring->buffer_info);
- ndev_err(adapter->netdev,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
return err;
}
@@ -2450,13 +2457,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
* For parts with AMT enabled, let the firmware know
* that the network interface is in control
*/
- if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+ if (adapter->flags & FLAG_HAS_AMT)
e1000_get_hw_control(adapter);
ew32(WUC, 0);
if (mac->ops.init_hw(hw))
- ndev_err(adapter->netdev, "Hardware Error\n");
+ e_err("Hardware Error\n");
e1000_update_mng_vlan(adapter);
@@ -2591,13 +2598,142 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
return 0;
err:
- ndev_err(netdev, "Unable to allocate memory for queues\n");
+ e_err("Unable to allocate memory for queues\n");
kfree(adapter->rx_ring);
kfree(adapter->tx_ring);
return -ENOMEM;
}
/**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ e_dbg("%s: icr is %08X\n", netdev->name, icr);
+ if (icr & E1000_ICR_RXSEQ) {
+ adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+ wmb();
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* poll_enable hasn't been called yet, so don't need disable */
+ /* clear any pending events */
+ er32(ICR);
+
+ /* free the real vector and request a test handler */
+ e1000_free_irq(adapter);
+
+ /* Assume that the test fails, if it succeeds then the test
+ * MSI irq handler will unset this flag */
+ adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+ err = pci_enable_msi(adapter->pdev);
+ if (err)
+ goto msi_test_failed;
+
+ err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+ netdev->name, netdev);
+ if (err) {
+ pci_disable_msi(adapter->pdev);
+ goto msi_test_failed;
+ }
+
+ wmb();
+
+ e1000_irq_enable(adapter);
+
+ /* fire an unusual interrupt on the test handler */
+ ew32(ICS, E1000_ICS_RXSEQ);
+ e1e_flush();
+ msleep(50);
+
+ e1000_irq_disable(adapter);
+
+ rmb();
+
+ if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+ err = -EIO;
+ e_info("MSI interrupt test failed!\n");
+ }
+
+ free_irq(adapter->pdev->irq, netdev);
+ pci_disable_msi(adapter->pdev);
+
+ if (err == -EIO)
+ goto msi_test_failed;
+
+ /* okay so the test worked, restore settings */
+ e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+msi_test_failed:
+ /* restore the original vector, even if it failed */
+ e1000_request_irq(adapter);
+ return err;
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+ int err;
+ u16 pci_cmd;
+
+ if (!(adapter->flags & FLAG_MSI_ENABLED))
+ return 0;
+
+ /* disable SERR in case the MSI write causes a master abort */
+ pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+ pci_write_config_word(adapter->pdev, PCI_COMMAND,
+ pci_cmd & ~PCI_COMMAND_SERR);
+
+ err = e1000_test_msi_interrupt(adapter);
+
+ /* restore previous setting of command word */
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+
+ /* success ! */
+ if (!err)
+ return 0;
+
+ /* EIO means MSI test failed */
+ if (err != -EIO)
+ return err;
+
+ /* back to INTx mode */
+ e_warn("MSI interrupt test failed, using legacy interrupt.\n");
+
+ e1000_free_irq(adapter);
+
+ err = e1000_request_irq(adapter);
+
+ return err;
+}
+
+/**
* e1000_open - Called when a network interface is made active
* @netdev: network interface device structure
*
@@ -2640,8 +2776,7 @@ static int e1000_open(struct net_device *netdev)
* If AMT is enabled, let the firmware know that the network
* interface is now open
*/
- if ((adapter->flags & FLAG_HAS_AMT) &&
- e1000e_check_mng_mode(&adapter->hw))
+ if (adapter->flags & FLAG_HAS_AMT)
e1000_get_hw_control(adapter);
/*
@@ -2656,6 +2791,19 @@ static int e1000_open(struct net_device *netdev)
if (err)
goto err_req_irq;
+ /*
+ * Work around PCIe errata with MSI interrupts causing some chipsets to
+ * ignore e1000e MSI messages, which means we need to test our MSI
+ * interrupt now
+ */
+ {
+ err = e1000_test_msi(adapter);
+ if (err) {
+ e_err("Interrupt allocation failed\n");
+ goto err_req_irq;
+ }
+ }
+
/* From here on the code is the same as e1000e_up() */
clear_bit(__E1000_DOWN, &adapter->state);
@@ -2719,8 +2867,7 @@ static int e1000_close(struct net_device *netdev)
* If AMT is enabled, let the firmware know that the network
* interface is now closed
*/
- if ((adapter->flags & FLAG_HAS_AMT) &&
- e1000e_check_mng_mode(&adapter->hw))
+ if (adapter->flags & FLAG_HAS_AMT)
e1000_release_hw_control(adapter);
return 0;
@@ -2917,8 +3064,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
if (ret_val)
- ndev_warn(adapter->netdev,
- "Error reading PHY register\n");
+ e_warn("Error reading PHY register\n");
} else {
/*
* Do not read PHY registers if link is not up
@@ -2943,18 +3089,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
u32 ctrl = er32(CTRL);
- ndev_info(netdev,
- "Link is Up %d Mbps %s, Flow Control: %s\n",
- adapter->link_speed,
- (adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "RX/TX" :
- ((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+ e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
+ adapter->link_speed,
+ (adapter->link_duplex == FULL_DUPLEX) ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+ "RX/TX" :
+ ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
}
static bool e1000_has_link(struct e1000_adapter *adapter)
@@ -2994,8 +3138,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
(er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- ndev_info(adapter->netdev,
- "Gigabit has been disabled, downgrading speed\n");
+ e_info("Gigabit has been disabled, downgrading speed\n");
}
return link_active;
@@ -3067,7 +3210,7 @@ static void e1000_watchdog_task(struct work_struct *work)
case SPEED_10:
txb2b = 0;
netdev->tx_queue_len = 10;
- adapter->tx_timeout_factor = 14;
+ adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
txb2b = 0;
@@ -3096,8 +3239,7 @@ static void e1000_watchdog_task(struct work_struct *work)
switch (adapter->link_speed) {
case SPEED_10:
case SPEED_100:
- ndev_info(netdev,
- "10/100 speed: disabling TSO\n");
+ e_info("10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO;
netdev->features &= ~NETIF_F_TSO6;
break;
@@ -3130,7 +3272,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- ndev_info(netdev, "Link is Down\n");
+ e_info("Link is Down\n");
netif_carrier_off(netdev);
netif_tx_stop_all_queues(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -3604,8 +3746,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- ndev_err(netdev,
- "__pskb_pull_tail failed.\n");
+ e_err("__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -3735,27 +3876,27 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
struct e1000_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
- if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+ if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
- ndev_err(netdev, "Invalid MTU setting\n");
+ e_err("Invalid MTU setting\n");
return -EINVAL;
}
/* Jumbo frame size limits */
if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- ndev_err(netdev, "Jumbo Frames not supported.\n");
+ e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
if (adapter->hw.phy.type == e1000_phy_ife) {
- ndev_err(netdev, "Jumbo Frames not supported.\n");
+ e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
}
#define MAX_STD_JUMBO_FRAME_SIZE 9234
if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
- ndev_err(netdev, "MTU > 9216 not supported.\n");
+ e_err("MTU > 9216 not supported.\n");
return -EINVAL;
}
@@ -3792,8 +3933,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
+ ETH_FCS_LEN;
- ndev_info(netdev, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
+ e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
if (netif_running(netdev))
@@ -4006,10 +4146,7 @@ static int e1000_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
e1000e_disable_l1aspm(pdev);
- if (adapter->need_ioport)
- err = pci_enable_device(pdev);
- else
- err = pci_enable_device_mem(pdev);
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot enable PCI device from suspend\n");
@@ -4043,7 +4180,7 @@ static int e1000_resume(struct pci_dev *pdev)
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver.
*/
- if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
return 0;
@@ -4111,10 +4248,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
int err;
e1000e_disable_l1aspm(pdev);
- if (adapter->need_ioport)
- err = pci_enable_device(pdev);
- else
- err = pci_enable_device_mem(pdev);
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
@@ -4162,8 +4296,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver.
*/
- if (!(adapter->flags & FLAG_HAS_AMT) ||
- !e1000e_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
}
@@ -4175,36 +4308,40 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
u32 pba_num;
/* print bus type/speed/width info */
- ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
- "%02x:%02x:%02x:%02x:%02x:%02x\n",
- /* bus width */
- ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
- /* MAC address */
- netdev->dev_addr[0], netdev->dev_addr[1],
- netdev->dev_addr[2], netdev->dev_addr[3],
- netdev->dev_addr[4], netdev->dev_addr[5]);
- ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
- (hw->phy.type == e1000_phy_ife)
- ? "10/100" : "1000");
+ e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+ /* bus width */
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+ "Width x1"),
+ /* MAC address */
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+ e_info("Intel(R) PRO/%s Network Connection\n",
+ (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
e1000e_read_pba_num(hw, &pba_num);
- ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
- hw->mac.type, hw->phy.type,
- (pba_num >> 8), (pba_num & 0xff));
+ e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+ hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
}
-/**
- * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Returns true if an adapters needs ioport resources
- **/
-static int e1000e_is_need_ioport(struct pci_dev *pdev)
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
{
- switch (pdev->device) {
- /* Currently there are no adapters that need ioport resources */
- default:
- return false;
+ struct e1000_hw *hw = &adapter->hw;
+ int ret_val;
+ u16 buf = 0;
+
+ if (hw->mac.type != e1000_82573)
+ return;
+
+ ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+ if (!(le16_to_cpu(buf) & (1 << 0))) {
+ /* Deep Smart Power Down (DSPD) */
+ e_warn("Warning: detected DSPD enabled in EEPROM\n");
+ }
+
+ ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
+ if (le16_to_cpu(buf) & (3 << 2)) {
+ /* ASPM enable */
+ e_warn("Warning: detected ASPM enabled in EEPROM\n");
}
}
@@ -4233,19 +4370,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
- int bars, need_ioport;
e1000e_disable_l1aspm(pdev);
- /* do not allocate ioport bars when not needed */
- need_ioport = e1000e_is_need_ioport(pdev);
- if (need_ioport) {
- bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
- err = pci_enable_device(pdev);
- } else {
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
- err = pci_enable_device_mem(pdev);
- }
+ err = pci_enable_device_mem(pdev);
if (err)
return err;
@@ -4268,7 +4396,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
}
- err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
+ err = pci_request_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -4293,8 +4423,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
- adapter->bars = bars;
- adapter->need_ioport = need_ioport;
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
@@ -4366,8 +4494,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
if (e1000_check_reset_block(&adapter->hw))
- ndev_info(netdev,
- "PHY reset is blocked due to SOL/IDER session.\n");
+ e_info("PHY reset is blocked due to SOL/IDER session.\n");
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
@@ -4411,25 +4538,26 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
break;
if (i == 2) {
- ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
+ e_err("The NVM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
}
+ e1000_eeprom_checks(adapter);
+
/* copy the MAC address out of the NVM */
if (e1000e_read_mac_addr(&adapter->hw))
- ndev_err(netdev, "NVM Read Error while reading MAC address\n");
+ e_err("NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
- ndev_err(netdev, "Invalid MAC Address: "
- "%02x:%02x:%02x:%02x:%02x:%02x\n",
- netdev->perm_addr[0], netdev->perm_addr[1],
- netdev->perm_addr[2], netdev->perm_addr[3],
- netdev->perm_addr[4], netdev->perm_addr[5]);
+ e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->perm_addr[0], netdev->perm_addr[1],
+ netdev->perm_addr[2], netdev->perm_addr[3],
+ netdev->perm_addr[4], netdev->perm_addr[5]);
err = -EIO;
goto err_eeprom;
}
@@ -4499,8 +4627,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver.
*/
- if (!(adapter->flags & FLAG_HAS_AMT) ||
- !e1000e_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
/* tell the stack to leave us alone until e1000_open() is called */
@@ -4517,24 +4644,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
return 0;
err_register:
-err_hw_init:
- e1000_release_hw_control(adapter);
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000_release_hw_control(adapter);
err_eeprom:
if (!e1000_check_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
- if (adapter->hw.flash_address)
- iounmap(adapter->hw.flash_address);
-
-err_flashmap:
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+err_flashmap:
iounmap(adapter->hw.hw_addr);
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_selected_regions(pdev, bars);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -4582,7 +4710,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_selected_regions(pdev, adapter->bars);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index a66b92efcf80..ed912e023a72 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -27,6 +27,7 @@
*******************************************************************************/
#include <linux/netdevice.h>
+#include <linux/pci.h>
#include "e1000.h"
@@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
+ e_info("%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
- ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
+ e_info("%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- ndev_info(adapter->netdev,
- "%s set to %i\n", opt->name, *value);
+ e_info("%s set to %i\n", opt->name, *value);
return 0;
}
break;
@@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- ndev_info(adapter->netdev, "%s\n",
- ent->str);
+ e_info("%s\n", ent->str);
return 0;
}
}
@@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG();
}
- ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
- opt->name, *value, opt->err);
+ e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
+ opt->err);
*value = opt->def;
return -1;
}
@@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value,
void __devinit e1000e_check_options(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
int bd = adapter->bd_number;
if (bd >= E1000_MAX_NIC) {
- ndev_notice(netdev,
- "Warning: no configuration for board #%i\n", bd);
- ndev_notice(netdev, "Using defaults for all values\n");
+ e_notice("Warning: no configuration for board #%i\n", bd);
+ e_notice("Using defaults for all values\n");
}
{ /* Transmit Interrupt Delay */
@@ -313,32 +310,41 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
adapter->itr = InterruptThrottleRate[bd];
switch (adapter->itr) {
case 0:
- ndev_info(netdev, "%s turned off\n",
- opt.name);
+ e_info("%s turned off\n", opt.name);
break;
case 1:
- ndev_info(netdev,
- "%s set to dynamic mode\n",
- opt.name);
+ e_info("%s set to dynamic mode\n", opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
case 3:
- ndev_info(netdev,
- "%s set to dynamic conservative mode\n",
+ e_info("%s set to dynamic conservative mode\n",
opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
default:
- e1000_validate_option(&adapter->itr, &opt,
- adapter);
/*
- * save the setting, because the dynamic bits
- * change itr. clear the lower two bits
- * because they are used as control
+ * Save the setting, because the dynamic bits
+ * change itr.
*/
- adapter->itr_setting = adapter->itr & ~3;
+ if (e1000_validate_option(&adapter->itr, &opt,
+ adapter) &&
+ (adapter->itr == 3)) {
+ /*
+ * In case of invalid user value,
+ * default to conservative mode.
+ */
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ } else {
+ /*
+ * Clear the lower two bits because
+ * they are used as control.
+ */
+ adapter->itr_setting =
+ adapter->itr & ~3;
+ }
break;
}
} else {
OpenPOWER on IntegriCloud