diff options
Diffstat (limited to 'drivers/net/dgrs_es4h.h')
| -rw-r--r-- | drivers/net/dgrs_es4h.h | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/drivers/net/dgrs_es4h.h b/drivers/net/dgrs_es4h.h deleted file mode 100644 index 5518fba46b2c..000000000000 --- a/drivers/net/dgrs_es4h.h +++ /dev/null @@ -1,183 +0,0 @@ -/************************************************************************/ -/* */ -/* es4h.h: Hardware definition of the ES/4h Ethernet Switch, from */ -/* both the host and the 3051's point of view. */ -/* NOTE: this name is a misnomer now that there is a PCI */ -/* board. Everything that says "es4h" should really be */ -/* "se4". But we'll keep the old name for now. */ -/* */ -/* $Id: es4h.h,v 1.10 1996/08/22 17:16:53 rick Exp $ */ -/* */ -/************************************************************************/ - -/************************************************************************/ -/* */ -/* EISA I/O Registers. These are located at 0x1000 * slot-number */ -/* plus the indicated address. I.E. 0x4000-0x4009 for slot 4. */ -/* */ -/************************************************************************/ - -#define ES4H_MANUFmsb 0x00 /* Read-only */ -#define ES4H_MANUFlsb 0x01 /* Read-only */ -# define ES4H_MANUF_CODE 0x1049 /* = "DBI" */ - -#define ES4H_PRODUCT 0x02 /* Read-only */ -# define ES4H_PRODUCT_CODE 0x0A -# define EPC_PRODUCT_CODE 0x03 - -#define ES4H_REVISION 0x03 /* Read-only */ -# define ES4H_REVISION_CODE 0x01 - -#define ES4H_EC 0x04 /* EISA Control */ -# define ES4H_EC_RESET 0x04 /* WO, EISA reset */ -# define ES4H_EC_ENABLE 0x01 /* RW, EISA enable - set to */ - /* 1 before memory enable */ -#define ES4H_PC 0x05 /* Processor Control */ -# define ES4H_PC_RESET 0x04 /* RW, 3051 reset */ -# define ES4H_PC_INT 0x08 /* WO, assert 3051 intr. 3 */ - -#define ES4H_MW 0x06 /* Memory Window select and enable */ -# define ES4H_MW_ENABLE 0x80 /* WO, enable memory */ -# define ES4H_MW_SELECT_MASK 0x1f /* WO, 32k window selected */ - -#define ES4H_IS 0x07 /* Interrupt, addr select */ -# define ES4H_IS_INTMASK 0x07 /* WO, interrupt select */ -# define ES4H_IS_INTOFF 0x00 /* No IRQ */ -# define ES4H_IS_INT3 0x03 /* IRQ 3 */ -# define ES4H_IS_INT5 0x02 /* IRQ 5 */ -# define ES4H_IS_INT7 0x01 /* IRQ 7 */ -# define ES4H_IS_INT10 0x04 /* IRQ 10 */ -# define ES4H_IS_INT11 0x05 /* IRQ 11 */ -# define ES4H_IS_INT12 0x06 /* IRQ 12 */ -# define ES4H_IS_INT15 0x07 /* IRQ 15 */ -# define ES4H_IS_INTACK 0x10 /* WO, interrupt ack */ -# define ES4H_IS_INTPEND 0x10 /* RO, interrupt pending */ -# define ES4H_IS_LINEAR 0x40 /* WO, no memory windowing */ -# define ES4H_IS_AS15 0x80 /* RW, address select bit 15 */ - -#define ES4H_AS_23_16 0x08 /* Address select bits 23-16 */ -#define ES4H_AS_31_24 0x09 /* Address select bits 31-24 */ - -#define ES4H_IO_MAX 0x09 /* Size of I/O space */ - -/* - * PCI - */ -#define SE6_RESET PLX_USEROUT - -/************************************************************************/ -/* */ -/* 3051 Memory Map */ -/* */ -/* Note: 3051 has 4K I-cache, 2K D-cache. 1 cycle is 50 nsec. */ -/* */ -/************************************************************************/ -#define SE4_NPORTS 4 /* # of ethernet ports */ -#define SE6_NPORTS 6 /* # of ethernet ports */ -#define SE_NPORTS 6 /* Max # of ethernet ports */ - -#define ES4H_RAM_BASE 0x83000000 /* Base address of RAM */ -#define ES4H_RAM_SIZE 0x00200000 /* Size of RAM (2MB) */ -#define ES4H_RAM_INTBASE 0x83800000 /* Base of int-on-write RAM */ - /* a.k.a. PKT RAM */ - - /* Ethernet controllers */ - /* See: i82596.h */ -#define ES4H_ETHER0_PORT 0xA2000000 -#define ES4H_ETHER0_CMD 0xA2000100 -#define ES4H_ETHER1_PORT 0xA2000200 -#define ES4H_ETHER1_CMD 0xA2000300 -#define ES4H_ETHER2_PORT 0xA2000400 -#define ES4H_ETHER2_CMD 0xA2000500 -#define ES4H_ETHER3_PORT 0xA2000600 -#define ES4H_ETHER3_CMD 0xA2000700 -#define ES4H_ETHER4_PORT 0xA2000800 /* RS SE-6 only */ -#define ES4H_ETHER4_CMD 0xA2000900 /* RS SE-6 only */ -#define ES4H_ETHER5_PORT 0xA2000A00 /* RS SE-6 only */ -#define ES4H_ETHER5_CMD 0xA2000B00 /* RS SE-6 only */ - -#define ES4H_I8254 0xA2040000 /* 82C54 timers */ - /* See: i8254.h */ - -#define SE4_I8254_HZ (23000000/4) /* EISA clock input freq. */ -#define SE4_IDT_HZ (46000000) /* EISA CPU freq. */ -#define SE6_I8254_HZ (20000000/4) /* PCI clock input freq. */ -#define SE6_IDT_HZ (50000000) /* PCI CPU freq. */ -#define ES4H_I8254_HZ (23000000/4) /* EISA clock input freq. */ - -#define ES4H_GPP 0xA2050000 /* General purpose port */ - /* - * SE-4 (EISA) GPP bits - */ -# define ES4H_GPP_C0_100 0x0001 /* WO, Chan 0: 100 ohm TP */ -# define ES4H_GPP_C0_SQE 0x0002 /* WO, Chan 0: normal squelch */ -# define ES4H_GPP_C1_100 0x0004 /* WO, Chan 1: 100 ohm TP */ -# define ES4H_GPP_C1_SQE 0x0008 /* WO, Chan 1: normal squelch */ -# define ES4H_GPP_C2_100 0x0010 /* WO, Chan 2: 100 ohm TP */ -# define ES4H_GPP_C2_SQE 0x0020 /* WO, Chan 2: normal squelch */ -# define ES4H_GPP_C3_100 0x0040 /* WO, Chan 3: 100 ohm TP */ -# define ES4H_GPP_C3_SQE 0x0080 /* WO, Chan 3: normal squelch */ -# define ES4H_GPP_SQE 0x00AA /* WO, All: normal squelch */ -# define ES4H_GPP_100 0x0055 /* WO, All: 100 ohm TP */ -# define ES4H_GPP_HOSTINT 0x0100 /* RO, cause intr. to host */ - /* Hold high > 250 nsec */ -# define SE4_GPP_EED 0x0200 /* RW, EEPROM data bit */ -# define SE4_GPP_EECS 0x0400 /* RW, EEPROM chip select */ -# define SE4_GPP_EECK 0x0800 /* RW, EEPROM clock */ - - /* - * SE-6 (PCI) GPP bits - */ -# define SE6_GPP_EED 0x0001 /* RW, EEPROM data bit */ -# define SE6_GPP_EECS 0x0002 /* RW, EEPROM chip select */ -# define SE6_GPP_EECK 0x0004 /* RW, EEPROM clock */ -# define SE6_GPP_LINK 0x00fc /* R, Link status LEDs */ - -#define ES4H_INTVEC 0xA2060000 /* RO: Interrupt Vector */ -# define ES4H_IV_DMA0 0x01 /* Chan 0 DMA interrupt */ -# define ES4H_IV_PKT0 0x02 /* Chan 0 PKT interrupt */ -# define ES4H_IV_DMA1 0x04 /* Chan 1 DMA interrupt */ -# define ES4H_IV_PKT1 0x08 /* Chan 1 PKT interrupt */ -# define ES4H_IV_DMA2 0x10 /* Chan 2 DMA interrupt */ -# define ES4H_IV_PKT2 0x20 /* Chan 2 PKT interrupt */ -# define ES4H_IV_DMA3 0x40 /* Chan 3 DMA interrupt */ -# define ES4H_IV_PKT3 0x80 /* Chan 3 PKT interrupt */ - -#define ES4H_INTACK 0xA2060000 /* WO: Interrupt Ack */ -# define ES4H_INTACK_8254 0x01 /* Real Time Clock (int 0) */ -# define ES4H_INTACK_HOST 0x02 /* Host (int 1) */ -# define ES4H_INTACK_PKT0 0x04 /* Chan 0 Pkt (int 2) */ -# define ES4H_INTACK_PKT1 0x08 /* Chan 1 Pkt (int 3) */ -# define ES4H_INTACK_PKT2 0x10 /* Chan 2 Pkt (int 4) */ -# define ES4H_INTACK_PKT3 0x20 /* Chan 3 Pkt (int 5) */ - -#define SE6_PLX 0xA2070000 /* PLX 9060, SE-6 (PCI) only */ - /* see plx9060.h */ - -#define SE6_PCI_VENDOR_ID 0x114F /* Digi PCI vendor ID */ -#define SE6_PCI_DEVICE_ID 0x0003 /* RS SE-6 device ID */ -#define SE6_PCI_ID ((SE6_PCI_DEVICE_ID<<16) | SE6_PCI_VENDOR_ID) - -/* - * IDT Interrupts - */ -#define ES4H_INT_8254 IDT_INT0 -#define ES4H_INT_HOST IDT_INT1 -#define ES4H_INT_ETHER0 IDT_INT2 -#define ES4H_INT_ETHER1 IDT_INT3 -#define ES4H_INT_ETHER2 IDT_INT4 -#define ES4H_INT_ETHER3 IDT_INT5 - -/* - * Because there are differences between the SE-4 and the SE-6, - * we assume that the following globals will be set up at init - * time in main.c to containt the appropriate constants from above - */ -extern ushort Gpp; /* Softcopy of GPP register */ -extern ushort EEck; /* Clock bit */ -extern ushort EEcs; /* CS bit */ -extern ushort EEd; /* Data bit */ -extern ulong I8254_Hz; /* i8254 input frequency */ -extern ulong IDT_Hz; /* IDT CPU frequency */ -extern int Nports; /* Number of ethernet controllers */ -extern int Nchan; /* Nports+1 */ |
