diff options
Diffstat (limited to 'drivers/net/can/sja1000')
| -rw-r--r-- | drivers/net/can/sja1000/Kconfig | 28 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/peak_pci.c | 505 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/peak_pcmcia.c | 753 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/plx_pci.c | 22 | ||||
| -rw-r--r-- | drivers/net/can/sja1000/sja1000.c | 19 |
6 files changed, 1300 insertions, 28 deletions
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 36e9d594069d..b60d6c5f29a0 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -43,12 +43,33 @@ config CAN_EMS_PCI CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). +config CAN_PEAK_PCMCIA + tristate "PEAK PCAN-PC Card" + depends on PCMCIA + ---help--- + This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) + from PEAK-System (http://www.peak-system.com). To compile this + driver as a module, choose M here: the module will be called + peak_pcmcia. + config CAN_PEAK_PCI - tristate "PEAK PCAN PCI/PCIe Cards" + tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" depends on PCI ---help--- - This driver is for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels) - from PEAK Systems (http://www.peak-system.com). + This driver is for the PCAN-PCI/PCIe/miniPCI cards + (1, 2, 3 or 4 channels) from PEAK-System Technik + (http://www.peak-system.com). + +config CAN_PEAK_PCIEC + bool "PEAK PCAN-ExpressCard Cards" + depends on CAN_PEAK_PCI + select I2C + select I2C_ALGOBIT + default y + ---help--- + Say Y here if you want to use a PCAN-ExpressCard from PEAK-System + Technik. This will also automatically select I2C and I2C_ALGO + configuration options. config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" @@ -71,6 +92,7 @@ config CAN_PLX_PCI - esd CAN-PCIe/2000 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) + - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) config CAN_TSCAN1 tristate "TS-CAN1 PC104 boards" diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile index 0604f240c8b1..b3d05cbfec36 100644 --- a/drivers/net/can/sja1000/Makefile +++ b/drivers/net/can/sja1000/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o +obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o obj-$(CONFIG_CAN_TSCAN1) += tscan1.o diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 214795945bc4..5f92b865f64b 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com> + * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com> * * Derived from the PCAN project file driver/src/pcan_pci.c: * @@ -13,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/kernel.h> @@ -26,22 +23,26 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> #include <linux/can.h> #include <linux/can/dev.h> #include "sja1000.h" MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); -MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI/PCIe cards"); -MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe CAN card"); +MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards"); MODULE_LICENSE("GPL v2"); #define DRV_NAME "peak_pci" +struct peak_pciec_card; struct peak_pci_chan { void __iomem *cfg_base; /* Common for all channels */ struct net_device *prev_dev; /* Chain of network devices */ u16 icr_mask; /* Interrupt mask for fast ack */ + struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ }; #define PEAK_PCI_CAN_CLOCK (16000000 / 2) @@ -61,16 +62,464 @@ struct peak_pci_chan { #define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ +#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ +#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ +#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */ + +#define PEAK_PCI_CHAN_MAX 4 -static const u16 peak_pci_icr_masks[] = {0x02, 0x01, 0x40, 0x80}; +static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { + 0x02, 0x01, 0x40, 0x80 +}; static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = { {PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, +#ifdef CONFIG_CAN_PEAK_PCIEC + {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, +#endif {0,} }; MODULE_DEVICE_TABLE(pci, peak_pci_tbl); +#ifdef CONFIG_CAN_PEAK_PCIEC +/* + * PCAN-ExpressCard needs I2C bit-banging configuration option. + */ + +/* GPIOICR byte access offsets */ +#define PITA_GPOUT 0x18 /* GPx output value */ +#define PITA_GPIN 0x19 /* GPx input value */ +#define PITA_GPOEN 0x1A /* configure GPx as ouput pin */ + +/* I2C GP bits */ +#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ +#define PITA_GPIN_SDA 0x04 /* Serial DAta line */ + +#define PCA9553_1_SLAVEADDR (0xC4 >> 1) + +/* PCA9553 LS0 fields values */ +enum { + PCA9553_LOW, + PCA9553_HIGHZ, + PCA9553_PWM0, + PCA9553_PWM1 +}; + +/* LEDs control */ +#define PCA9553_ON PCA9553_LOW +#define PCA9553_OFF PCA9553_HIGHZ +#define PCA9553_SLOW PCA9553_PWM0 +#define PCA9553_FAST PCA9553_PWM1 + +#define PCA9553_LED(c) (1 << (c)) +#define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) + +#define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) +#define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) +#define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) +#define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) +#define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) + +#define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) + +#define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ + +struct peak_pciec_chan { + struct net_device *netdev; + unsigned long prev_rx_bytes; + unsigned long prev_tx_bytes; +}; + +struct peak_pciec_card { + void __iomem *cfg_base; /* Common for all channels */ + void __iomem *reg_base; /* first channel base address */ + u8 led_cache; /* leds state cache */ + + /* PCIExpressCard i2c data */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter led_chip; + struct delayed_work led_work; /* led delayed work */ + int chan_count; + struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; +}; + +/* "normal" pci register write callback is overloaded for leds control */ +static void peak_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val); + +static inline void pita_set_scl_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static inline void pita_set_sda_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) +{ + /* raise SCL & SDA GPIOs to high-Z */ + pita_set_scl_highz(card); + pita_set_sda_highz(card); +} + +static void pita_setsda(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output sda always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output sda with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SDA; + else + gp_outen |= PITA_GPIN_SDA; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void pita_setscl(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output scl always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output scl with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SCL; + else + gp_outen |= PITA_GPIN_SCL; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static int pita_getsda(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_sda_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; +} + +static int pita_getscl(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_scl_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; +} + +/* + * write commands to the LED chip though the I2C-bus of the PCAN-PCIeC + */ +static int peak_pciec_write_pca9553(struct peak_pciec_card *card, + u8 offset, u8 data) +{ + u8 buffer[2] = { + offset, + data + }; + struct i2c_msg msg = { + .addr = PCA9553_1_SLAVEADDR, + .len = 2, + .buf = buffer, + }; + int ret; + + /* cache led mask */ + if ((offset == 5) && (data == card->led_cache)) + return 0; + + ret = i2c_transfer(&card->led_chip, &msg, 1); + if (ret < 0) + return ret; + + if (offset == 5) + card->led_cache = data; + + return 0; +} + +/* + * delayed work callback used to control the LEDs + */ +static void peak_pciec_led_work(struct work_struct *work) +{ + struct peak_pciec_card *card = + container_of(work, struct peak_pciec_card, led_work.work); + struct net_device *netdev; + u8 new_led = card->led_cache; + int i, up_count = 0; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) { + /* default is: not configured */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_ON(i); + + netdev = card->channel[i].netdev; + if (!netdev || !(netdev->flags & IFF_UP)) + continue; + + up_count++; + + /* no activity (but configured) */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_SLOW(i); + + /* if bytes counters changed, set fast blinking led */ + if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { + card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { + card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); + + /* restart timer (except if no more configured channels) */ + if (up_count) + schedule_delayed_work(&card->led_work, HZ); +} + +/* + * set LEDs blinking state + */ +static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) +{ + u8 new_led = card->led_cache; + int i; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) + if (led_mask & PCA9553_LED(i)) { + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_STATE(s, i); + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); +} + +/* + * start one second delayed work to control LEDs + */ +static void peak_pciec_start_led_work(struct peak_pciec_card *card) +{ + if (!delayed_work_pending(&card->led_work)) + schedule_delayed_work(&card->led_work, HZ); +} + +/* + * stop LEDs delayed work + */ +static void peak_pciec_stop_led_work(struct peak_pciec_card *card) +{ + cancel_delayed_work_sync(&card->led_work); +} + +/* + * initialize the PCA9553 4-bit I2C-bus LED chip + */ +static int peak_pciec_init_leds(struct peak_pciec_card *card) +{ + int err; + + /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ + err = peak_pciec_write_pca9553(card, 1, 44 / 1); + if (err) + return err; + + /* duty cycle 0: 50% */ + err = peak_pciec_write_pca9553(card, 2, 0x80); + if (err) + return err; + + /* prescaler for frequency 1: "FAST" = 5 Hz */ + err = peak_pciec_write_pca9553(card, 3, 44 / 5); + if (err) + return err; + + /* duty cycle 1: 50% */ + err = peak_pciec_write_pca9553(card, 4, 0x80); + if (err) + return err; + + /* switch LEDs to initial state */ + return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); +} + +/* + * restore LEDs state to off peak_pciec_leds_exit + */ +static void peak_pciec_leds_exit(struct peak_pciec_card *card) +{ + /* switch LEDs to off */ + peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); +} + +/* + * normal write sja1000 register method overloaded to catch when controller + * is started or stopped, to control leds + */ +static void peak_pciec_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card = chan->pciec_card; + int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; + + /* sja1000 register changes control the leds state */ + if (port == REG_MOD) + switch (val) { + case MOD_RM: + /* Reset Mode: set led on */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); + break; + case 0x00: + /* Normal Mode: led slow blinking and start led timer */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); + peak_pciec_start_led_work(card); + break; + default: + break; + } + + /* call base function */ + peak_pci_write_reg(priv, port, val); +} + +static struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { + .setsda = pita_setsda, + .setscl = pita_setscl, + .getsda = pita_getsda, + .getscl = pita_getscl, + .udelay = 10, + .timeout = HZ, +}; + +static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card; + int err; + + /* copy i2c object address from 1st channel */ + if (chan->prev_dev) { + struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); + struct peak_pci_chan *prev_chan = prev_priv->priv; + + card = prev_chan->pciec_card; + if (!card) + return -ENODEV; + + /* channel is the first one: do the init part */ + } else { + /* create the bit banging I2C adapter structure */ + card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL); + if (!card) { + dev_err(&pdev->dev, + "failed allocating memory for i2c chip\n"); + return -ENOMEM; + } + + card->cfg_base = chan->cfg_base; + card->reg_base = priv->reg_base; + + card->led_chip.owner = THIS_MODULE; + card->led_chip.dev.parent = &pdev->dev; + card->led_chip.algo_data = &card->i2c_bit; + strncpy(card->led_chip.name, "peak_i2c", + sizeof(card->led_chip.name)); + + card->i2c_bit = peak_pciec_i2c_bit_ops; + card->i2c_bit.udelay = 10; + card->i2c_bit.timeout = HZ; + card->i2c_bit.data = card; + + peak_pciec_init_pita_gpio(card); + + err = i2c_bit_add_bus(&card->led_chip); + if (err) { + dev_err(&pdev->dev, "i2c init failed\n"); + goto pciec_init_err_1; + } + + err = peak_pciec_init_leds(card); + if (err) { + dev_err(&pdev->dev, "leds hardware init failed\n"); + goto pciec_init_err_2; + } + + INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); + /* PCAN-ExpressCard needs its own callback for leds */ + priv->write_reg = peak_pciec_write_reg; + } + + chan->pciec_card = card; + card->channel[card->chan_count++].netdev = dev; + + return 0; + +pciec_init_err_2: + i2c_del_adapter(&card->led_chip); + +pciec_init_err_1: + peak_pciec_init_pita_gpio(card); + kfree(card); + + return err; +} + +static void peak_pciec_remove(struct peak_pciec_card *card) +{ + peak_pciec_stop_led_work(card); + peak_pciec_leds_exit(card); + i2c_del_adapter(&card->led_chip); + peak_pciec_init_pita_gpio(card); + kfree(card); +} + +#else /* CONFIG_CAN_PEAK_PCIEC */ + +/* + * Placebo functions when PCAN-ExpressCard support is not selected + */ +static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + return -ENODEV; +} + +static inline void peak_pciec_remove(struct peak_pciec_card *card) +{ +} +#endif /* CONFIG_CAN_PEAK_PCIEC */ + static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) { return readb(priv->reg_base + (port << 2)); @@ -188,17 +637,31 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); + /* Create chain of SJA1000 devices */ + chan->prev_dev = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, dev); + + /* + * PCAN-ExpressCard needs some additional i2c init. + * This must be done *before* register_sja1000dev() but + * *after* devices linkage + */ + if (pdev->device == PEAK_PCIEC_DEVICE_ID) { + err = peak_pciec_probe(pdev, dev); + if (err) { + dev_err(&pdev->dev, + "failed to probe device (err %d)\n", + err); + goto failure_free_dev; + } + } + err = register_sja1000dev(dev); if (err) { dev_err(&pdev->dev, "failed to register device\n"); - free_sja1000dev(dev); - goto failure_remove_channels; + goto failure_free_dev; } - /* Create chain of SJA1000 devices */ - chan->prev_dev = pci_get_drvdata(pdev); - pci_set_drvdata(pdev, dev); - dev_info(&pdev->dev, "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", dev->name, priv->reg_base, chan->cfg_base, dev->irq); @@ -209,10 +672,15 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev, return 0; +failure_free_dev: + pci_set_drvdata(pdev, chan->prev_dev); + free_sja1000dev(dev); + failure_remove_channels: /* Disable interrupts */ writew(0x0, cfg_base + PITA_ICR + 2); + chan = NULL; for (dev = pci_get_drvdata(pdev); dev; dev = chan->prev_dev) { unregister_sja1000dev(dev); free_sja1000dev(dev); @@ -220,6 +688,10 @@ failure_remove_channels: chan = priv->priv; } + /* free any PCIeC resources too */ + if (chan && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); + pci_iounmap(pdev, reg_base); failure_unmap_cfg_base: @@ -251,8 +723,13 @@ static void __devexit peak_pci_remove(struct pci_dev *pdev) unregister_sja1000dev(dev); free_sja1000dev(dev); dev = chan->prev_dev; - if (!dev) + + if (!dev) { + /* do that only for first channel */ + if (chan->pciec_card) + peak_pciec_remove(chan->pciec_card); break; + } priv = netdev_priv(dev); chan = priv->priv; } diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c new file mode 100644 index 000000000000..ec6bd9d1b2af --- /dev/null +++ b/drivers/net/can/sja1000/peak_pcmcia.c @@ -0,0 +1,753 @@ +/* + * Copyright (C) 2010-2012 Stephane Grosjean <s.grosjean@peak-system.com> + * + * CAN driver for PEAK-System PCAN-PC Card + * Derived from the PCAN project file driver/src/pcan_pccard.c + * Copyright (C) 2006-2010 PEAK System-Technik GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/io.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> +#include <linux/can.h> +#include <linux/can/dev.h> +#include "sja1000.h" + +MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>"); +MODULE_DESCRIPTION("CAN driver for PEAK-System PCAN-PC Cards"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN-PC Card"); + +/* PEAK-System PCMCIA driver name */ +#define PCC_NAME "peak_pcmcia" + +#define PCC_CHAN_MAX 2 + +#define PCC_CAN_CLOCK (16000000 / 2) + +#define PCC_MANF_ID 0x0377 +#define PCC_CARD_ID 0x0001 + +#define PCC_CHAN_SIZE 0x20 +#define PCC_CHAN_OFF(c) ((c) * PCC_CHAN_SIZE) +#define PCC_COMN_OFF (PCC_CHAN_OFF(PCC_CHAN_MAX)) +#define PCC_COMN_SIZE 0x40 + +/* common area registers */ +#define PCC_CCR 0x00 +#define PCC_CSR 0x02 +#define PCC_CPR 0x04 +#define PCC_SPI_DIR 0x06 +#define PCC_SPI_DOR 0x08 +#define PCC_SPI_ADR 0x0a +#define PCC_SPI_IR 0x0c +#define PCC_FW_MAJOR 0x10 +#define PCC_FW_MINOR 0x12 + +/* CCR bits */ +#define PCC_CCR_CLK_16 0x00 +#define PCC_CCR_CLK_10 0x01 +#define PCC_CCR_CLK_21 0x02 +#define PCC_CCR_CLK_8 0x03 +#define PCC_CCR_CLK_MASK PCC_CCR_CLK_8 + +#define PCC_CCR_RST_CHAN(c) (0x01 << ((c) + 2)) +#define PCC_CCR_RST_ALL (PCC_CCR_RST_CHAN(0) | PCC_CCR_RST_CHAN(1)) +#define PCC_CCR_RST_MASK PCC_CCR_RST_ALL + +/* led selection bits */ +#define PCC_LED(c) (1 << (c)) +#define PCC_LED_ALL (PCC_LED(0) | PCC_LED(1)) + +/* led state value */ +#define PCC_LED_ON 0x00 +#define PCC_LED_FAST 0x01 +#define PCC_LED_SLOW 0x02 +#define PCC_LED_OFF 0x03 + +#define PCC_CCR_LED_CHAN(s, c) ((s) << (((c) + 2) << 1)) + +#define PCC_CCR_LED_ON_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_ON, c) +#define PCC_CCR_LED_FAST_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_FAST, c) +#define PCC_CCR_LED_SLOW_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_SLOW, c) +#define PCC_CCR_LED_OFF_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_OFF, c) +#define PCC_CCR_LED_MASK_CHAN(c) PCC_CCR_LED_OFF_CHAN(c) +#define PCC_CCR_LED_OFF_ALL (PCC_CCR_LED_OFF_CHAN(0) | \ + PCC_CCR_LED_OFF_CHAN(1)) +#define PCC_CCR_LED_MASK PCC_CCR_LED_OFF_ALL + +#define PCC_CCR_INIT (PCC_CCR_CLK_16 | PCC_CCR_RST_ALL | PCC_CCR_LED_OFF_ALL) + +/* CSR bits */ +#define PCC_CSR_SPI_BUSY 0x04 + +/* time waiting for SPI busy (prevent from infinite loop) */ +#define PCC_SPI_MAX_BUSY_WAIT_MS 3 + +/* max count of reading the SPI status register waiting for a change */ +/* (prevent from infinite loop) */ +#define PCC_WRITE_MAX_LOOP 1000 + +/* max nb of int handled by that isr in one shot (prevent from infinite loop) */ +#define PCC_ISR_MAX_LOOP 10 + +/* EEPROM chip instruction set */ +/* note: EEPROM Read/Write instructions include A8 bit */ +#define PCC_EEP_WRITE(a) (0x02 | (((a) & 0x100) >> 5)) +#define PCC_EEP_READ(a) (0x03 | (((a) & 0x100) >> 5)) +#define PCC_EEP_WRDI 0x04 /* EEPROM Write Disable */ +#define PCC_EEP_RDSR 0x05 /* EEPROM Read Status Register */ +#define PCC_EEP_WREN 0x06 /* EEPROM Write Enable */ + +/* EEPROM Status Register bits */ +#define PCC_EEP_SR_WEN 0x02 /* EEPROM SR Write Enable bit */ +#define PCC_EEP_SR_WIP 0x01 /* EEPROM SR Write In Progress bit */ + +/* + * The board configuration is probably following: + * RX1 is connected to ground. + * TX1 is not connected. + * CLKO is not connected. + * Setting the OCR register to 0xDA is a good idea. + * This means normal output mode, push-pull and the correct polarity. + */ +#define PCC_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) + +/* + * In the CDR register, you should set CBP to 1. + * You will probably also want to set the clock divider value to 7 + * (meaning direct oscillator output) because the second SJA1000 chip + * is driven by the first one CLKOUT output. + */ +#define PCC_CDR (CDR_CBP | CDR_CLKOUT_MASK) + +struct pcan_channel { + struct net_device *netdev; + unsigned long prev_rx_bytes; + unsigned long prev_tx_bytes; +}; + +/* PCAN-PC Card private structure */ +struct pcan_pccard { + struct pcmcia_device *pdev; + int chan_count; + struct pcan_channel channel[PCC_CHAN_MAX]; + u8 ccr; + u8 fw_major; + u8 fw_minor; + void __iomem *ioport_addr; + struct timer_list led_timer; +}; + +static struct pcmcia_device_id pcan_table[] = { + PCMCIA_DEVICE_MANF_CARD(PCC_MANF_ID, PCC_CARD_ID), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcan_table); + +static void pcan_set_leds(struct pcan_pccard *card, u8 mask, u8 state); + +/* + * start timer which controls leds state + */ +static void pcan_start_led_timer(struct pcan_pccard *card) +{ + if (!timer_pending(&card->led_timer)) + mod_timer(&card->led_timer, jiffies + HZ); +} + +/* + * stop the timer which controls leds state + */ +static void pcan_stop_led_timer(struct pcan_pccard *card) +{ + del_timer_sync(&card->led_timer); +} + +/* + * read a sja1000 register + */ +static u8 pcan_read_canreg(const struct sja1000_priv *priv, int port) +{ + return ioread8(priv->reg_base + port); +} + +/* + * write a sja1000 register + */ +static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v) +{ + struct pcan_pccard *card = priv->priv; + int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE; + + /* sja1000 register changes control the leds state */ + if (port == REG_MOD) + switch (v) { + case MOD_RM: + /* Reset Mode: set led on */ + pcan_set_leds(card, PCC_LED(c), PCC_LED_ON); + break; + case 0x00: + /* Normal Mode: led slow blinking and start led timer */ + pcan_set_leds(card, PCC_LED(c), PCC_LED_SLOW); + pcan_start_led_timer(card); + break; + default: + break; + } + + iowrite8(v, priv->reg_base + port); +} + +/* + * read a register from the common area + */ +static u8 pcan_read_reg(struct pcan_pccard *card, int port) +{ + return ioread8(card->ioport_addr + PCC_COMN_OFF + port); +} + +/* + * write a register into the common area + */ +static void pcan_write_reg(struct pcan_pccard *card, int port, u8 v) +{ + /* cache ccr value */ + if (port == PCC_CCR) { + if (card->ccr == v) + return; + card->ccr = v; + } + + iowrite8(v, card->ioport_addr + PCC_COMN_OFF + port); +} + +/* + * check whether the card is present by checking its fw version numbers + * against values read at probing time. + */ +static inline int pcan_pccard_present(struct pcan_pccard *card) +{ + return ((pcan_read_reg(card, PCC_FW_MAJOR) == card->fw_major) && + (pcan_read_reg(card, PCC_FW_MINOR) == card->fw_minor)); +} + +/* + * wait for SPI engine while it is busy + */ +static int pcan_wait_spi_busy(struct pcan_pccard *card) +{ + unsigned long timeout = jiffies + + msecs_to_jiffies(PCC_SPI_MAX_BUSY_WAIT_MS) + 1; + + /* be sure to read status at least once after sleeping */ + while (pcan_read_reg(card, PCC_CSR) & PCC_CSR_SPI_BUSY) { + if (time_after(jiffies, timeout)) + return -EBUSY; + schedule(); + } + + return 0; +} + +/* + * write data in device eeprom + */ +static int pcan_write_eeprom(struct pcan_pccard *card, u16 addr, u8 v) +{ + u8 status; + int err, i; + + /* write instruction enabling write */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WREN); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* wait until write enabled */ + for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) { + /* write instruction reading the status register */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* get status register value and check write enable bit */ + status = pcan_read_reg(card, PCC_SPI_DIR); + if (status & PCC_EEP_SR_WEN) + break; + } + + if (i >= PCC_WRITE_MAX_LOOP) { + dev_err(&card->pdev->dev, + "stop waiting to be allowed to write in eeprom\n"); + return -EIO; + } + + /* set address and data */ + pcan_write_reg(card, PCC_SPI_ADR, addr & 0xff); + pcan_write_reg(card, PCC_SPI_DOR, v); + + /* + * write instruction with bit[3] set according to address value: + * if addr refers to upper half of the memory array: bit[3] = 1 + */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRITE(addr)); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* wait while write in progress */ + for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) { + /* write instruction reading the status register */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + /* get status register value and check write in progress bit */ + status = pcan_read_reg(card, PCC_SPI_DIR); + if (!(status & PCC_EEP_SR_WIP)) + break; + } + + if (i >= PCC_WRITE_MAX_LOOP) { + dev_err(&card->pdev->dev, + "stop waiting for write in eeprom to complete\n"); + return -EIO; + } + + /* write instruction disabling write */ + pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRDI); + err = pcan_wait_spi_busy(card); + if (err) + goto we_spi_err; + + return 0; + +we_spi_err: + dev_err(&card->pdev->dev, + "stop waiting (spi engine always busy) err %d\n", err); + + return err; +} + +static void pcan_set_leds(struct pcan_pccard *card, u8 led_mask, u8 state) +{ + u8 ccr = card->ccr; + int i; + + for (i = 0; i < card->chan_count; i++) + if (led_mask & PCC_LED(i)) { + /* clear corresponding led bits in ccr */ + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + /* then set new bits */ + ccr |= PCC_CCR_LED_CHAN(state, i); + } + + /* real write only if something has changed in ccr */ + pcan_write_reg(card, PCC_CCR, ccr); +} + +/* + * enable/disable CAN connectors power + */ +static inline void pcan_set_can_power(struct pcan_pccard *card, int onoff) +{ + int err; + + err = pcan_write_eeprom(card, 0, !!onoff); + if (err) + dev_err(&card->pdev->dev, + "failed setting power %s to can connectors (err %d)\n", + (onoff) ? "on" : "off", err); +} + +/* + * set leds state according to channel activity + */ +static void pcan_led_timer(unsigned long arg) +{ + struct pcan_pccard *card = (struct pcan_pccard *)arg; + struct net_device *netdev; + int i, up_count = 0; + u8 ccr; + + ccr = card->ccr; + for (i = 0; i < card->chan_count; i++) { + /* default is: not configured */ + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_ON_CHAN(i); + + netdev = card->channel[i].netdev; + if (!netdev || !(netdev->flags & IFF_UP)) + continue; + + up_count++; + + /* no activity (but configured) */ + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_SLOW_CHAN(i); + + /* if bytes counters changed, set fast blinking led */ + if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { + card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_FAST_CHAN(i); + } + if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { + card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; + ccr &= ~PCC_CCR_LED_MASK_CHAN(i); + ccr |= PCC_CCR_LED_FAST_CHAN(i); + } + } + + /* write the new leds state */ + pcan_write_reg(card, PCC_CCR, ccr); + + /* restart timer (except if no more configured channels) */ + if (up_count) + mod_timer(&card->led_timer, jiffies + HZ); +} + +/* + * interrupt service routine + */ +static irqreturn_t pcan_isr(int irq, void *dev_id) +{ + struct pcan_pccard *card = dev_id; + int irq_handled; + + /* prevent from infinite loop */ + for (irq_handled = 0; irq_handled < PCC_ISR_MAX_LOOP; irq_handled++) { + /* handle shared interrupt and next loop */ + int nothing_to_handle = 1; + int i; + + /* check interrupt for each channel */ + for (i = 0; i < card->chan_count; i++) { + struct net_device *netdev; + + /* + * check whether the card is present before calling + * sja1000_interrupt() to speed up hotplug detection + */ + if (!pcan_pccard_present(card)) { + /* card unplugged during isr */ + return IRQ_NONE; + } + + /* + * should check whether all or SJA1000_MAX_IRQ + * interrupts have been handled: loop again to be sure. + */ + netdev = card->channel[i].netdev; + if (netdev && + sja1000_interrupt(irq, netdev) == IRQ_HANDLED) + nothing_to_handle = 0; + } + + if (nothing_to_handle) + break; + } + + return (irq_handled) ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * free all resources used by the channels and switch off leds and can power + */ +static void pcan_free_channels(struct pcan_pccard *card) +{ + int i; + u8 led_mask = 0; + + for (i = 0; i < card->chan_count; i++) { + struct net_device *netdev; + char name[IFNAMSIZ]; + + led_mask |= PCC_LED(i); + + netdev = card->channel[i].netdev; + if (!netdev) + continue; + + strncpy(name, netdev->name, IFNAMSIZ); + + unregister_sja1000dev(netdev); + + free_sja1000dev(netdev); + + dev_info(&card->pdev->dev, "%s removed\n", name); + } + + /* do it only if device not removed */ + if (pcan_pccard_present(card)) { + pcan_set_leds(card, led_mask, PCC_LED_OFF); + pcan_set_can_power(card, 0); + } +} + +/* + * check if a CAN controller is present at the specified location + */ +static inline int pcan_channel_present(struct sja1000_priv *priv) +{ + /* make sure SJA1000 is in reset mode */ + pcan_write_canreg(priv, REG_MOD, 1); + pcan_write_canreg(priv, REG_CDR, CDR_PELICAN); + + /* read reset-values */ + if (pcan_read_canreg(priv, REG_CDR) == CDR_PELICAN) + return 1; + + return 0; +} + +static int pcan_add_channels(struct pcan_pccard *card) +{ + struct pcmcia_device *pdev = card->pdev; + int i, err = 0; + u8 ccr = PCC_CCR_INIT; + + /* init common registers (reset channels and leds off) */ + card->ccr = ~ccr; + pcan_write_reg(card, PCC_CCR, ccr); + + /* wait 2ms before unresetting channels */ + mdelay(2); + + ccr &= ~PCC_CCR_RST_ALL; + pcan_write_reg(card, PCC_CCR, ccr); + + /* create one network device per channel detected */ + for (i = 0; i < ARRAY_SIZE(card->channel); i++) { + struct net_device *netdev; + struct sja1000_priv *priv; + + netdev = alloc_sja1000dev(0); + if (!netdev) { + err = -ENOMEM; + break; + } + + /* update linkages */ + priv = netdev_priv(netdev); + priv->priv = card; + SET_NETDEV_DEV(netdev, &pdev->dev); + + priv->irq_flags = IRQF_SHARED; + netdev->irq = pdev->irq; + priv->reg_base = card->ioport_addr + PCC_CHAN_OFF(i); + + /* check if channel is present */ + if (!pcan_channel_present(priv)) { + dev_err(&pdev->dev, "channel %d not present\n", i); + free_sja1000dev(netdev); + continue; + } + + priv->read_reg = pcan_read_canreg; + priv->write_reg = pcan_write_canreg; + priv->can.clock.freq = PCC_CAN_CLOCK; + priv->ocr = PCC_OCR; + priv->cdr = PCC_CDR; + + /* Neither a slave device distributes the clock */ + if (i > 0) + priv->cdr |= CDR_CLK_OFF; + + priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER; + + /* register SJA1000 device */ + err = register_sja1000dev(netdev); + if (err) { + free_sja1000dev(netdev); + continue; + } + + card->channel[i].netdev = netdev; + card->chan_count++; + + /* set corresponding led on in the new ccr */ + ccr &= ~PCC_CCR_LED_OFF_CHAN(i); + + dev_info(&pdev->dev, + "%s on channel %d at 0x%p irq %d\n", + netdev->name, i, priv->reg_base, pdev->irq); + } + + /* write new ccr (change leds state) */ + pcan_write_reg(card, PCC_CCR, ccr); + + return err; +} + +static int pcan_conf_check(struct pcmcia_device *pdev, void *priv_data) +{ + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* only */ + pdev->io_lines = 10; + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(pdev); +} + +/* + * free all resources used by the device + */ +static void pcan_free(struct pcmcia_device *pdev) +{ + struct pcan_pccard *card = pdev->priv; + + if (!card) + return; + + free_irq(pdev->irq, card); + pcan_stop_led_timer(card); + + pcan_free_channels(card); + + ioport_unmap(card->ioport_addr); + + kfree(card); + pdev->priv = NULL; +} + +/* + * setup PCMCIA socket and probe for PEAK-System PC-CARD + */ +static int __devinit pcan_probe(struct pcmcia_device *pdev) +{ + struct pcan_pccard *card; + int err; + + pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + + err = pcmcia_loop_config(pdev, pcan_conf_check, NULL); + if (err) { + dev_err(&pdev->dev, "pcmcia_loop_config() error %d\n", err); + goto probe_err_1; + } + + if (!pdev->irq) { + dev_err(&pdev->dev, "no irq assigned\n"); + err = -ENODEV; + goto probe_err_1; + } + + err = pcmcia_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pcmcia_enable_device failed err=%d\n", + err); + goto probe_err_1; + } + + card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL); + if (!card) { + dev_err(&pdev->dev, "couldn't allocate card memory\n"); + err = -ENOMEM; + goto probe_err_2; + } + + card->pdev = pdev; + pdev->priv = card; + + /* sja1000 api uses iomem */ + card->ioport_addr = ioport_map(pdev->resource[0]->start, + resource_size(pdev->resource[0])); + if (!card->ioport_addr) { + dev_err(&pdev->dev, "couldn't map io port into io memory\n"); + err = -ENOMEM; + goto probe_err_3; + } + card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR); + card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR); + + /* display board name and firware version */ + dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n", + pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card", + card->fw_major, card->fw_minor); + + /* detect available channels */ + pcan_add_channels(card); + if (!card->chan_count) + goto probe_err_4; + + /* init the timer which controls the leds */ + init_timer(&card->led_timer); + card->led_timer.function = pcan_led_timer; + card->led_timer.data = (unsigned long)card; + + /* request the given irq */ + err = request_irq(pdev->irq, &pcan_isr, IRQF_SHARED, PCC_NAME, card); + if (err) { + dev_err(&pdev->dev, "couldn't request irq%d\n", pdev->irq); + goto probe_err_5; + } + + /* power on the connectors */ + pcan_set_can_power(card, 1); + + return 0; + +probe_err_5: + /* unregister can devices from network */ + pcan_free_channels(card); + +probe_err_4: + ioport_unmap(card->ioport_addr); + +probe_err_3: + kfree(card); + pdev->priv = NULL; + +probe_err_2: + pcmcia_disable_device(pdev); + +probe_err_1: + return err; +} + +/* + * release claimed resources + */ +static void pcan_remove(struct pcmcia_device *pdev) +{ + pcan_free(pdev); + pcmcia_disable_device(pdev); +} + +static struct pcmcia_driver pcan_driver = { + .name = PCC_NAME, + .probe = pcan_probe, + .remove = pcan_remove, + .id_table = pcan_table, +}; + +static int __init pcan_init(void) +{ + return pcmcia_register_driver(&pcan_driver); +} +module_init(pcan_init); + +static void __exit pcan_exit(void) +{ + pcmcia_unregister_driver(&pcan_driver); +} +module_exit(pcan_exit); diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index c7f3d4ea1167..a227586ddd52 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -43,7 +43,8 @@ MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, " "TEWS TECHNOLOGIES TPMC810, " "esd CAN-PCI/CPCI/PCI104/200, " "esd CAN-PCI/PMC/266, " - "esd CAN-PCIe/2000") + "esd CAN-PCIe/2000, " + "IXXAT PC-I 04/PCI") MODULE_LICENSE("GPL v2"); #define PLX_PCI_MAX_CHAN 2 @@ -121,6 +122,10 @@ struct plx_pci_card { #define ESD_PCI_SUB_SYS_ID_PCIE2000 0x0200 #define ESD_PCI_SUB_SYS_ID_PCI104200 0x0501 +#define IXXAT_PCI_VENDOR_ID 0x10b5 +#define IXXAT_PCI_DEVICE_ID 0x9050 +#define IXXAT_PCI_SUB_SYS_ID 0x2540 + #define MARATHON_PCI_DEVICE_ID 0x2715 #define TEWS_PCI_VENDOR_ID 0x1498 @@ -193,6 +198,14 @@ static struct plx_pci_card_info plx_pci_card_info_esd2000 __devinitdata = { /* based on PEX8311 */ }; +static struct plx_pci_card_info plx_pci_card_info_ixxat __devinitdata = { + "IXXAT PC-I 04/PCI", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x200, 0x80} }, + &plx_pci_reset_common + /* based on PLX9050 */ +}; + static struct plx_pci_card_info plx_pci_card_info_marathon __devinitdata = { "Marathon CAN-bus-PCI", 2, PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, @@ -267,6 +280,13 @@ static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = { (kernel_ulong_t)&plx_pci_card_info_esd2000 }, { + /* IXXAT PC-I 04/PCI card */ + IXXAT_PCI_VENDOR_ID, IXXAT_PCI_DEVICE_ID, + PCI_ANY_ID, IXXAT_PCI_SUB_SYS_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_ixxat + }, + { /* Marathon CAN-bus-PCI card */ PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 192b0d118df4..5e10472371ed 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -133,7 +133,7 @@ static void set_reset_mode(struct net_device *dev) status = priv->read_reg(priv, REG_MOD); } - dev_err(dev->dev.parent, "setting SJA1000 into reset mode failed!\n"); + netdev_err(dev, "setting SJA1000 into reset mode failed!\n"); } static void set_normal_mode(struct net_device *dev) @@ -161,7 +161,7 @@ static void set_normal_mode(struct net_device *dev) status = priv->read_reg(priv, REG_MOD); } - dev_err(dev->dev.parent, "setting SJA1000 into normal mode failed!\n"); + netdev_err(dev, "setting SJA1000 into normal mode failed!\n"); } static void sja1000_start(struct net_device *dev) @@ -214,8 +214,7 @@ static int sja1000_set_bittiming(struct net_device *dev) if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) btr1 |= 0x80; - dev_info(dev->dev.parent, - "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1); + netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1); priv->write_reg(priv, REG_BTR0, btr0); priv->write_reg(priv, REG_BTR1, btr1); @@ -383,7 +382,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) if (isrc & IRQ_DOI) { /* data overrun interrupt */ - dev_dbg(dev->dev.parent, "data overrun interrupt\n"); + netdev_dbg(dev, "data overrun interrupt\n"); cf->can_id |= CAN_ERR_CRTL; cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; stats->rx_over_errors++; @@ -393,7 +392,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) if (isrc & IRQ_EI) { /* error warning interrupt */ - dev_dbg(dev->dev.parent, "error warning interrupt\n"); + netdev_dbg(dev, "error warning interrupt\n"); if (status & SR_BS) { state = CAN_STATE_BUS_OFF; @@ -434,7 +433,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) } if (isrc & IRQ_EPI) { /* error passive interrupt */ - dev_dbg(dev->dev.parent, "error passive interrupt\n"); + netdev_dbg(dev, "error passive interrupt\n"); if (status & SR_ES) state = CAN_STATE_ERROR_PASSIVE; else @@ -442,7 +441,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status) } if (isrc & IRQ_ALI) { /* arbitration lost interrupt */ - dev_dbg(dev->dev.parent, "arbitration lost interrupt\n"); + netdev_dbg(dev, "arbitration lost interrupt\n"); alc = priv->read_reg(priv, REG_ALC); priv->can.can_stats.arbitration_lost++; stats->tx_errors++; @@ -503,7 +502,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) return IRQ_NONE; if (isrc & IRQ_WUI) - dev_warn(dev->dev.parent, "wakeup interrupt\n"); + netdev_warn(dev, "wakeup interrupt\n"); if (isrc & IRQ_TI) { /* transmission complete interrupt */ @@ -533,7 +532,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) priv->post_irq(priv); if (n >= SJA1000_MAX_IRQ) - dev_dbg(dev->dev.parent, "%d messages handled in ISR", n); + netdev_dbg(dev, "%d messages handled in ISR", n); return (n) ? IRQ_HANDLED : IRQ_NONE; } |
