diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_reg.h | 938 |
1 files changed, 920 insertions, 18 deletions
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index a1f3bf0cd630..1cefe489a955 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2009 Broadcom Corporation + * Copyright (c) 2007-2010 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,7 +19,20 @@ * */ - +#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2) +#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1<<5) +#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1<<3) +#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1<<4) +#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1) +/* [RW 1] Initiate the ATC array - reset all the valid bits */ +#define ATC_REG_ATC_INIT_ARRAY 0x1100b8 +/* [R 1] ATC initalization done */ +#define ATC_REG_ATC_INIT_DONE 0x1100bc +/* [RC 6] Interrupt register #0 read clear */ +#define ATC_REG_ATC_INT_STS_CLR 0x1101c0 +/* [RW 19] Interrupt mask register #0 read/write */ +#define BRB1_REG_BRB1_INT_MASK 0x60128 /* [R 19] Interrupt register #0 read */ #define BRB1_REG_BRB1_INT_STS 0x6011c /* [RW 4] Parity mask register #0 read/write */ @@ -27,9 +40,31 @@ /* [R 4] Parity register #0 read */ #define BRB1_REG_BRB1_PRTY_STS 0x6012c /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At - address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address - BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */ + * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address + * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning - + * following reset the first rbc access to this reg must be write; there can + * be no more rbc writes after the first one; there can be any number of rbc + * read following the first write; rbc access not following these rules will + * result in hang condition. */ #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200 +/* [RW 10] The number of free blocks below which the full signal to class 0 + * is asserted */ +#define BRB1_REG_FULL_0_XOFF_THRESHOLD_0 0x601d0 +/* [RW 10] The number of free blocks above which the full signal to class 0 + * is de-asserted */ +#define BRB1_REG_FULL_0_XON_THRESHOLD_0 0x601d4 +/* [RW 10] The number of free blocks below which the full signal to class 1 + * is asserted */ +#define BRB1_REG_FULL_1_XOFF_THRESHOLD_0 0x601d8 +/* [RW 10] The number of free blocks above which the full signal to class 1 + * is de-asserted */ +#define BRB1_REG_FULL_1_XON_THRESHOLD_0 0x601dc +/* [RW 10] The number of free blocks below which the full signal to the LB + * port is asserted */ +#define BRB1_REG_FULL_LB_XOFF_THRESHOLD 0x601e0 +/* [RW 10] The number of free blocks above which the full signal to the LB + * port is de-asserted */ +#define BRB1_REG_FULL_LB_XON_THRESHOLD 0x601e4 /* [RW 10] The number of free blocks above which the High_llfc signal to interface #n is de-asserted. */ #define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c @@ -44,6 +79,9 @@ /* [RW 10] The number of free blocks below which the Low_llfc signal to interface #n is asserted. */ #define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c +/* [RW 10] The number of blocks guarantied for the MAC port */ +#define BRB1_REG_MAC_GUARANTIED_0 0x601e8 +#define BRB1_REG_MAC_GUARANTIED_1 0x60240 /* [R 24] The number of full blocks. */ #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090 /* [ST 32] The number of cycles that the write_full signal towards MAC #0 @@ -55,7 +93,19 @@ asserted. */ #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc -/* [RW 10] Write client 0: De-assert pause threshold. */ +/* [RW 10] The number of free blocks below which the pause signal to class 0 + * is asserted */ +#define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 0x601c0 +/* [RW 10] The number of free blocks above which the pause signal to class 0 + * is de-asserted */ +#define BRB1_REG_PAUSE_0_XON_THRESHOLD_0 0x601c4 +/* [RW 10] The number of free blocks below which the pause signal to class 1 + * is asserted */ +#define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0 0x601c8 +/* [RW 10] The number of free blocks above which the pause signal to class 1 + * is de-asserted */ +#define BRB1_REG_PAUSE_1_XON_THRESHOLD_0 0x601cc +/* [RW 10] Write client 0: De-assert pause threshold. Not Functional */ #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c /* [RW 10] Write client 0: Assert pause threshold. */ @@ -362,6 +412,7 @@ #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004 /* [R 9] Number of Leaving LCIDs in Link List Block */ #define CFC_REG_NUM_LCIDS_LEAVING 0x104018 +#define CFC_REG_WEAK_ENABLE_PF 0x104124 /* [RW 8] The event id for aggregated interrupt 0 */ #define CSDM_REG_AGG_INT_EVENT_0 0xc2038 #define CSDM_REG_AGG_INT_EVENT_10 0xc2060 @@ -590,10 +641,17 @@ #define CSEM_REG_TS_8_AS 0x200058 /* [RW 3] The arbitration scheme of time_slot 9 */ #define CSEM_REG_TS_9_AS 0x20005c +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define CSEM_REG_VFPF_ERR_NUM 0x200380 /* [RW 1] Parity mask register #0 read/write */ #define DBG_REG_DBG_PRTY_MASK 0xc0a8 /* [R 1] Parity register #0 read */ #define DBG_REG_DBG_PRTY_STS 0xc09c +/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The + * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0; + * 4.Completion function=0; 5.Error handling=0 */ +#define DMAE_REG_BACKWARD_COMP_EN 0x10207c /* [RW 32] Commands memory. The address to command X; row Y is to calculated as 14*X+Y. */ #define DMAE_REG_CMD_MEM 0x102400 @@ -742,9 +800,13 @@ #define HC_REG_HC_PRTY_MASK 0x1080a0 /* [R 3] Parity register #0 read */ #define HC_REG_HC_PRTY_STS 0x108094 -#define HC_REG_INT_MASK 0x108108 +/* [RC 3] Parity register #0 read clear */ +#define HC_REG_HC_PRTY_STS_CLR 0x108098 +#define HC_REG_INT_MASK 0x108108 #define HC_REG_LEADING_EDGE_0 0x108040 #define HC_REG_LEADING_EDGE_1 0x108048 +#define HC_REG_MAIN_MEMORY 0x108800 +#define HC_REG_MAIN_MEMORY_SIZE 152 #define HC_REG_P0_PROD_CONS 0x108200 #define HC_REG_P1_PROD_CONS 0x108400 #define HC_REG_PBA_COMMAND 0x108140 @@ -758,6 +820,92 @@ #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 #define HC_REG_VQID_0 0x108008 #define HC_REG_VQID_1 0x10800c +#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1<<1) +#define IGU_REG_ATTENTION_ACK_BITS 0x130108 +/* [R 4] Debug: attn_fsm */ +#define IGU_REG_ATTN_FSM 0x130054 +#define IGU_REG_ATTN_MSG_ADDR_H 0x13011c +#define IGU_REG_ATTN_MSG_ADDR_L 0x130120 +/* [R 4] Debug: [3] - attention write done message is pending (0-no pending; + * 1-pending). [2:0] = PFID. Pending means attention message was sent; but + * write done didnt receive. */ +#define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030 +#define IGU_REG_BLOCK_CONFIGURATION 0x130000 +#define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124 +#define IGU_REG_COMMAND_REG_CTRL 0x13012c +/* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit + * is clear. The bits in this registers are set and clear via the producer + * command. Data valid only in addresses 0-4. all the rest are zero. */ +#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200 +/* [R 5] Debug: ctrl_fsm */ +#define IGU_REG_CTRL_FSM 0x130064 +/* [R 1] data availble for error memory. If this bit is clear do not red + * from error_handling_memory. */ +#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130 +/* [R 11] Parity register #0 read */ +#define IGU_REG_IGU_PRTY_STS 0x13009c +/* [R 4] Debug: int_handle_fsm */ +#define IGU_REG_INT_HANDLE_FSM 0x130050 +#define IGU_REG_LEADING_EDGE_LATCH 0x130134 +/* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid. + * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF + * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */ +#define IGU_REG_MAPPING_MEMORY 0x131000 +#define IGU_REG_MAPPING_MEMORY_SIZE 136 +#define IGU_REG_PBA_STATUS_LSB 0x130138 +#define IGU_REG_PBA_STATUS_MSB 0x13013c +#define IGU_REG_PCI_PF_MSI_EN 0x130140 +#define IGU_REG_PCI_PF_MSIX_EN 0x130144 +#define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148 +/* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no + * pending; 1 = pending. Pendings means interrupt was asserted; and write + * done was not received. Data valid only in addresses 0-4. all the rest are + * zero. */ +#define IGU_REG_PENDING_BITS_STATUS 0x130300 +#define IGU_REG_PF_CONFIGURATION 0x130154 +/* [RW 20] producers only. E2 mode: address 0-135 match to the mapping + * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default + * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod; + * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode + * - In backward compatible mode; for non default SB; each even line in the + * memory holds the U producer and each odd line hold the C producer. The + * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The + * last 20 producers are for the DSB for each PF. each PF has five segments + * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods; + * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */ +#define IGU_REG_PROD_CONS_MEMORY 0x132000 +/* [R 3] Debug: pxp_arb_fsm */ +#define IGU_REG_PXP_ARB_FSM 0x130068 +/* [RW 6] Write one for each bit will reset the appropriate memory. When the + * memory reset finished the appropriate bit will be clear. Bit 0 - mapping + * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3 + * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */ +#define IGU_REG_RESET_MEMORIES 0x130158 +/* [R 4] Debug: sb_ctrl_fsm */ +#define IGU_REG_SB_CTRL_FSM 0x13004c +#define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c +#define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160 +#define IGU_REG_SB_MASK_LSB 0x130164 +#define IGU_REG_SB_MASK_MSB 0x130168 +/* [RW 16] Number of command that were dropped without causing an interrupt + * due to: read access for WO BAR address; or write access for RO BAR + * address or any access for reserved address or PCI function error is set + * and address is not MSIX; PBA or cleanup */ +#define IGU_REG_SILENT_DROP 0x13016c +/* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 - + * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per + * PF; 68-71 number of ATTN messages per PF */ +#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800 +/* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a + * timer mask command arrives. Value must be bigger than 100. */ +#define IGU_REG_TIMER_MASKING_VALUE 0x13003c +#define IGU_REG_TRAILING_EDGE_LATCH 0x130104 +#define IGU_REG_VF_CONFIGURATION 0x130170 +/* [WB_R 32] Each bit represent write done pending bits status for that SB + * (MSI/MSIX message was sent and write done was not received yet). 0 = + * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */ +#define IGU_REG_WRITE_DONE_PENDING 0x130480 +#define MCP_A_REG_MCPR_SCRATCH 0x3a0000 #define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424 #define MCP_REG_MCPR_NVM_ADDR 0x8640c #define MCP_REG_MCPR_NVM_CFG4 0x8642c @@ -880,6 +1028,11 @@ rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 +/* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as + * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC + * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] + * CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */ +#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700 /* [W 14] write to this register results with the clear of the latched signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP @@ -1251,6 +1404,7 @@ #define MISC_REG_E1HMF_MODE 0xa5f8 /* [RW 32] Debug only: spare RW register reset by core reset */ #define MISC_REG_GENERIC_CR_0 0xa460 +#define MISC_REG_GENERIC_CR_1 0xa464 /* [RW 32] Debug only: spare RW register reset by por reset */ #define MISC_REG_GENERIC_POR_1 0xa474 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of @@ -1373,6 +1527,14 @@ #define MISC_REG_PLL_STORM_CTRL_2 0xa298 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 +/* [R 1] Status of 4 port mode enable input pin. */ +#define MISC_REG_PORT4MODE_EN 0xa750 +/* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 - + * the port4mode_en output is equal to 4 port mode input pin; if it is 1 - + * the port4mode_en output is equal to bit[1] of this register; [1] - + * Overwrite value. If bit[0] of this register is 1 this is the value that + * receives the port4mode_en output . */ +#define MISC_REG_PORT4MODE_EN_OVWR 0xa720 /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset; write/read zero = the specific block is in reset; addr 0-wr- the write value will be written to the register; addr 1-set - one will be written @@ -1656,8 +1818,91 @@ /* [R 32] Interrupt register #0 read */ #define NIG_REG_NIG_INT_STS_0 0x103b0 #define NIG_REG_NIG_INT_STS_1 0x103c0 -/* [R 32] Parity register #0 read */ +/* [R 32] Legacy E1 and E1H location for parity error status register. */ #define NIG_REG_NIG_PRTY_STS 0x103d0 +/* [R 32] Parity register #0 read */ +#define NIG_REG_NIG_PRTY_STS_0 0x183bc +#define NIG_REG_NIG_PRTY_STS_1 0x183cc +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038 +/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in + * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be + * disabled when this bit is set. */ +#define NIG_REG_P0_HWPFC_ENABLE 0x18078 +#define NIG_REG_P0_LLH_FUNC_MEM2 0x18480 +#define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440 +/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for + * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit + * priority field is extracted from the outer-most VLAN in receive packet. + * Only COS 0 and COS 1 are supported in E2. */ +#define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A + * priority is mapped to COS 0 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A + * priority is mapped to COS 1 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c +/* [RW 15] Specify which of the credit registers the client is to be mapped + * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For + * clients that are not subject to WFQ credit blocking - their + * specifications here are not used. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0 +/* [RW 5] Specify whether the client competes directly in the strict + * priority arbiter. The bits are mapped according to client ID (client IDs + * are defined in tx_arb_priority_client). Default value is set to enable + * strict priorities for clients 0-2 -- management and debug traffic. */ +#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8 +/* [RW 5] Specify whether the client is subject to WFQ credit blocking. The + * bits are mapped according to client ID (client IDs are defined in + * tx_arb_priority_client). Default value is 0 for not using WFQ credit + * blocking. */ +#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec +/* [RW 32] Specify the upper bound that credit register 0 is allowed to + * reach. */ +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110 +/* [RW 32] Specify the weight (in bytes) to be added to credit register 0 + * when it is time to increment. */ +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc +/* [RW 12] Specify the number of strict priority arbitration slots between + * two round-robin arbitration slots to avoid starvation. A value of 0 means + * no strict priority cycles - the strict priority with anti-starvation + * arbiter becomes a round-robin arbiter. */ +#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4 +/* [RW 15] Specify the client number to be assigned to each priority of the + * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0] + * are for priority 0 client; bits [14:12] are for priority 4 client. The + * clients are assigned the following IDs: 0-management; 1-debug traffic + * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 + * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000) + * for management at priority 0; debug traffic at priorities 1 and 2; COS0 + * traffic at priority 3; and COS1 traffic at priority 4. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4 +#define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0 +#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460 +/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for + * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit + * priority field is extracted from the outer-most VLAN in receive packet. + * Only COS 0 and COS 1 are supported in E2. */ +#define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A + * priority is mapped to COS 0 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A + * priority is mapped to COS 1 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0 /* [RW 1] Pause enable for port0. This register may get 1 only when ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same port */ @@ -1742,6 +1987,10 @@ /* [RW 1] Disable processing further tasks from port 4 (after ending the current task in process). */ #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c +#define PBF_REG_DISABLE_PF 0x1402e8 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8 #define PBF_REG_IF_ENABLE_REG 0x140044 /* [RW 1] Init bit. When set the initial credits are copied to the credit registers (except the port credits). Should be set and then reset after @@ -1765,6 +2014,8 @@ #define PBF_REG_MAC_IF1_ENABLE 0x140034 /* [RW 1] Enable for the loopback interface. */ #define PBF_REG_MAC_LB_ENABLE 0x140040 +/* [RW 6] Bit-map indicating which headers must appear in the packet */ +#define PBF_REG_MUST_HAVE_HDRS 0x15c0c4 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause not suppoterd. */ #define PBF_REG_P0_ARB_THRSH 0x1400e4 @@ -1804,6 +2055,259 @@ #define PB_REG_PB_PRTY_MASK 0x38 /* [R 4] Parity register #0 read */ #define PB_REG_PB_PRTY_STS 0x2c +#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8) +#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1) +#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1<<6) +#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1<<7) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1<<4) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1<<3) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1<<5) +#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1<<2) +/* [R 8] Config space A attention dirty bits. Each bit indicates that the + * corresponding PF generates config space A attention. Set by PXP. Reset by + * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010 +/* [R 8] Config space B attention dirty bits. Each bit indicates that the + * corresponding PF generates config space B attention. Set by PXP. Reset by + * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014 +/* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE 0x9194 +/* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask; + * its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */ +#define PGLUE_B_REG_CSDM_INB_INT_B_VF 0x916c +/* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE 0x919c +/* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_START_OFFSET_A 0x9100 +/* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_START_OFFSET_B 0x9108 +/* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_VF_SHIFT_B 0x9110 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF 0x91ac +/* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates + * that the FLR register of the corresponding PF was set. Set by PXP. Reset + * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028 +/* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1 + * to a bit in this register in order to clear the corresponding bit in + * flr_request_pf_7_0 register. Note: register contains bits from both + * paths. */ +#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418 +/* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024 +/* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018 +/* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c +/* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020 +/* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit + * 0 - Target memory read arrived with a correctable error. Bit 1 - Target + * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW + * arrived with a correctable error. Bit 3 - Configuration RW arrived with + * an uncorrectable error. Bit 4 - Completion with Configuration Request + * Retry Status. Bit 5 - Expansion ROM access received with a write request. + * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and + * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010; + * and pcie_rx_last not asserted. */ +#define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068 +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430 +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE 0x9434 +#define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438 +/* [R 9] Interrupt register #0 read */ +#define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298 +/* [RC 9] Interrupt register #0 read clear */ +#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c +/* [R 2] Parity register #0 read */ +#define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8 +/* [R 13] Details of first request received with error. [2:0] - PFID. [3] - + * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion + * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 - + * completer abort. 3 - Illegal value for this field. [12] valid - indicates + * if there was a completion error since the last time this register was + * cleared. */ +#define PGLUE_B_REG_RX_ERR_DETAILS 0x9080 +/* [R 18] Details of first ATS Translation Completion request received with + * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code - + * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 - + * unsupported request. 2 - completer abort. 3 - Illegal value for this + * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a + * completion error since the last time this register was cleared. */ +#define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084 +/* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to + * a bit in this register in order to clear the corresponding bit in + * shadow_bme_pf_7_0 register. MCP should never use this unless a + * work-around is needed. Note: register contains bits from both paths. */ +#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458 +/* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the + * VF enable register of the corresponding PF is written to 0 and was + * previously 1. Set by PXP. Reset by MCP writing 1 to + * sr_iov_disabled_request_clr. Note: register contains bits from both + * paths. */ +#define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030 +/* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read + * completion did not return yet. 1 - tag is unused. Same functionality as + * pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */ +#define PGLUE_B_REG_TAGS_63_32 0x9244 +/* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE 0x9170 +/* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_START_OFFSET_A 0x90c4 +/* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_START_OFFSET_B 0x90cc +/* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_VF_SHIFT_B 0x90d4 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF 0x91a0 +/* [R 32] Address [31:0] of first read request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098 +/* [R 32] Address [63:32] of first read request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c +/* [R 31] Details of first read request not submitted due to error. [4:0] + * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request. + * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] - + * VFID. */ +#define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0 +/* [R 26] Details of first read request not submitted due to error. [15:0] + * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - + * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; + * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent + * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - + * indicates if there was a request not submitted due to error since the + * last time this register was cleared. */ +#define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4 +/* [R 32] Address [31:0] of first write request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088 +/* [R 32] Address [63:32] of first write request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c +/* [R 31] Details of first write request not submitted due to error. [4:0] + * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] + * - VFID. */ +#define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090 +/* [R 26] Details of first write request not submitted due to error. [15:0] + * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - + * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; + * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent + * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - + * indicates if there was a request not submitted due to error since the + * last time this register was cleared. */ +#define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094 +/* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask; + * its[4:0]-address relative to start_offset_a. Bits [1:0] can have any + * value (Byte resolution address). */ +#define PGLUE_B_REG_USDM_INB_INT_A_0 0x9128 +#define PGLUE_B_REG_USDM_INB_INT_A_1 0x912c +#define PGLUE_B_REG_USDM_INB_INT_A_2 0x9130 +#define PGLUE_B_REG_USDM_INB_INT_A_3 0x9134 +#define PGLUE_B_REG_USDM_INB_INT_A_4 0x9138 +#define PGLUE_B_REG_USDM_INB_INT_A_5 0x913c +#define PGLUE_B_REG_USDM_INB_INT_A_6 0x9140 +/* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE 0x917c +/* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE 0x9180 +/* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE 0x9184 +/* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_START_OFFSET_A 0x90d8 +/* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_START_OFFSET_B 0x90e0 +/* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_VF_SHIFT_B 0x90e8 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF 0x91a4 +/* [R 26] Details of first target VF request accessing VF GRC space that + * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write. + * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a + * request accessing VF GRC space that failed permission check since the + * last time this register was cleared. Permission checks are: function + * permission; R/W permission; address range permission. */ +#define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234 +/* [R 31] Details of first target VF request with length violation (too many + * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address). + * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30] + * valid - indicates if there was a request with length violation since the + * last time this register was cleared. Length violations: length of more + * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and + * length is more than 1 DW. */ +#define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230 +/* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates + * that there was a completion with uncorrectable error for the + * corresponding PF. Set by PXP. Reset by MCP writing 1 to + * was_error_pf_7_0_clr. */ +#define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c +/* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1 + * to a bit in this register in order to clear the corresponding bit in + * flr_request_pf_7_0 register. */ +#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470 +/* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_127_96_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078 +/* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP + * writes 1 to a bit in this register in order to clear the corresponding + * bit in was_error_vf_127_96 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474 +/* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_31_0_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c +/* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_31_0 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478 +/* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_63_32_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070 +/* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_63_32 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c +/* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_95_64_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074 +/* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_95_64 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480 +/* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE 0x9188 +/* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_START_OFFSET_A 0x90ec +/* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_START_OFFSET_B 0x90f4 +/* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_VF_SHIFT_B 0x90fc +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF 0x91a8 #define PRS_REG_A_PRSU_20 0x40134 /* [R 8] debug only: CFC load request current credit. Transaction based. */ #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 @@ -1866,9 +2370,13 @@ #define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018 #define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c #define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define PRS_REG_HDRS_AFTER_BASIC 0x40238 /* [RW 4] The increment value to send in the CFC load request message */ #define PRS_REG_INC_VALUE 0x40048 -/* [RW 1] If set indicates not to send messages to CFC on received packets */ +/* [RW 6] Bit-map indicating which headers must appear in the packet */ +#define PRS_REG_MUST_HAVE_HDRS 0x40254 #define PRS_REG_NIC_MODE 0x40138 /* [RW 8] The 8-bit event ID for cases where there is no match on the connection. Used in packet start message to TCM. */ @@ -1919,6 +2427,13 @@ #define PRS_REG_TCM_CURRENT_CREDIT 0x40160 /* [R 8] debug only: TSDM current credit. Transaction based. */ #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c +#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1<<23) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1<<24) +#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) +#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) /* [R 6] Debug only: Number of used entries in the data FIFO */ #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c /* [R 7] Debug only: Number of used entries in the header FIFO */ @@ -2244,8 +2759,17 @@ /* [RW 1] When '1'; requests will enter input buffers but wont get out towards the glue */ #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 -/* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */ +/* [RW 4] Determines alignment of write SRs when a request is split into + * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B + * aligned. 4 - 512B aligned. */ #define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0 +/* [RW 4] Determines alignment of read SRs when a request is split into + * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B + * aligned. 4 - 512B aligned. */ +#define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c +/* [RW 1] when set the new alignment method (E2) will be applied; when reset + * the original alignment method (E1 E1H) will be applied */ +#define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930 /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will be asserted */ #define PXP2_REG_RQ_ELT_DISABLE 0x12066c @@ -2436,7 +2960,8 @@ #define PXP_REG_PXP_INT_STS_1 0x103078 /* [RC 32] Interrupt register #0 read clear */ #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c -/* [RW 26] Parity mask register #0 read/write */ +#define PXP_REG_PXP_INT_STS_CLR_1 0x10307c +/* [RW 27] Parity mask register #0 read/write */ #define PXP_REG_PXP_PRTY_MASK 0x103094 /* [R 26] Parity register #0 read */ #define PXP_REG_PXP_PRTY_STS 0x103088 @@ -2566,6 +3091,7 @@ #define QM_REG_PAUSESTATE7 0x16e698 /* [RW 2] The PCI attributes field used in the PCI request. */ #define QM_REG_PCIREQAT 0x168054 +#define QM_REG_PF_EN 0x16e70c /* [R 16] The byte credit of port 0 */ #define QM_REG_PORT0BYTECRD 0x168300 /* [R 16] The byte credit of port 1 */ @@ -3402,6 +3928,14 @@ /* [R 32] Parity register #0 read */ #define TSEM_REG_TSEM_PRTY_STS_0 0x180114 #define TSEM_REG_TSEM_PRTY_STS_1 0x180124 +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define TSEM_REG_VFPF_ERR_NUM 0x180380 +/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits + * [10:8] of the address should be the offset within the accessed LCID + * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 + * LCID100. The RBC address should be 12'ha64. */ +#define UCM_REG_AG_CTX 0xe2000 /* [R 5] Used to read the XX protection CAM occupancy counter. */ #define UCM_REG_CAM_OCCUP 0xe0170 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -3851,6 +4385,17 @@ /* [R 32] Parity register #0 read */ #define USEM_REG_USEM_PRTY_STS_0 0x300124 #define USEM_REG_USEM_PRTY_STS_1 0x300134 +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define USEM_REG_VFPF_ERR_NUM 0x300380 +#define VFC_MEMORIES_RST_REG_CAM_RST (0x1<<0) +#define VFC_MEMORIES_RST_REG_RAM_RST (0x1<<1) +#define VFC_REG_MEMORIES_RST 0x1943c +/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits + * [12:8] of the address should be the offset within the accessed LCID + * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 + * LCID100. The RBC address should be 13'ha64. */ +#define XCM_REG_AG_CTX 0x28000 /* [RW 2] The queue index for registration on Aux1 counter flag. */ #define XCM_REG_AUX1_Q 0x20134 /* [RW 2] Per each decision rule the queue index to register to. */ @@ -4333,6 +4878,9 @@ #define XSEM_REG_TS_8_AS 0x280058 /* [RW 3] The arbitration scheme of time_slot 9 */ #define XSEM_REG_TS_9_AS 0x28005c +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define XSEM_REG_VFPF_ERR_NUM 0x280380 /* [RW 32] Interrupt mask register #0 read/write */ #define XSEM_REG_XSEM_INT_MASK_0 0x280110 #define XSEM_REG_XSEM_INT_MASK_1 0x280120 @@ -4371,6 +4919,23 @@ #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) +#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3) +#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) +#define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3) +#define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3) +#define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3) +#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3) +#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3) +#define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3) +#define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3) +#define BIGMAC2_REGISTER_RX_STAT_GRPP (0x51<<3) +#define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3) +#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3) +#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3) +#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTPP (0x24<<3) #define EMAC_LED_1000MB_OVERRIDE (1L<<1) #define EMAC_LED_100MB_OVERRIDE (1L<<2) #define EMAC_LED_10MB_OVERRIDE (1L<<3) @@ -4478,6 +5043,8 @@ #define HW_LOCK_RESOURCE_SPIO 2 #define HW_LOCK_RESOURCE_UNDI 5 #define PRS_FLAG_OVERETH_IPV4 1 +#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9) @@ -4504,6 +5071,8 @@ #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20) #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0) #define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31) +#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3) #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3) #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2) #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5) @@ -4796,6 +5365,253 @@ #define PCI_ID_VAL1 0x434 #define PCI_ID_VAL2 0x438 +#define PXPCS_TL_CONTROL_5 0x814 +#define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ +#define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN (1 << 28) /*WC*/ +#define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN (1 << 27) /*WC*/ +#define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN (1 << 26) /*WC*/ +#define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR (1 << 25) /*WC*/ +#define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW (1 << 24) /*WC*/ +#define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN (1 << 23) /*RO*/ +#define PXPCS_TL_CONTROL_5_DL_ERR_ATTN (1 << 22) /*RO*/ +#define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE (1 << 21) /*WC*/ +#define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG (1 << 20) /*WC*/ +#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1 (1 << 19) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 (1 << 18) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_ECRC1 (1 << 17) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1 (1 << 16) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1 (1 << 15) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1 (1 << 14) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1 (1 << 13) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1 (1 << 12) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1 (1 << 11) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1 (1 << 10) /*WC*/ +#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT (1 << 9) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT (1 << 8) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_ECRC (1 << 7) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP (1 << 6) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW (1 << 5) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL (1 << 4) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT (1 << 3) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT (1 << 2) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL (1 << 1) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP (1 << 0) /*WC*/ + + +#define PXPCS_TL_FUNC345_STAT 0x854 +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4 (1 << 29) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\ + (1 << 28) /* Unsupported Request Error Status in function4, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\ + (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\ + (1 << 26) /* Malformed TLP Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\ + (1 << 25) /* Receiver Overflow Status Status in function 4, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\ + (1 << 24) /* Unexpected Completion Status Status in function 4, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\ + (1 << 23) /* Receive UR Statusin function 4. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\ + (1 << 22) /* Completer Timeout Status Status in function 4, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\ + (1 << 21) /* Flow Control Protocol Error Status Status in \ + function 4, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\ + (1 << 20) /* Poisoned Error Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3 (1 << 19) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\ + (1 << 18) /* Unsupported Request Error Status in function3, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\ + (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\ + (1 << 16) /* Malformed TLP Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\ + (1 << 15) /* Receiver Overflow Status Status in function 3, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\ + (1 << 14) /* Unexpected Completion Status Status in function 3, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\ + (1 << 13) /* Receive UR Statusin function 3. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\ + (1 << 12) /* Completer Timeout Status Status in function 3, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\ + (1 << 11) /* Flow Control Protocol Error Status Status in \ + function 3, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\ + (1 << 10) /* Poisoned Error Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2 (1 << 9) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\ + (1 << 8) /* Unsupported Request Error Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\ + (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\ + (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\ + (1 << 5) /* Receiver Overflow Status Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\ + (1 << 4) /* Unexpected Completion Status Status for Function 2, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\ + (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\ + (1 << 2) /* Completer Timeout Status Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\ + (1 << 1) /* Flow Control Protocol Error Status Status for \ + Function 2, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\ + (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ + + +#define PXPCS_TL_FUNC678_STAT 0x85C +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7 (1 << 29) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\ + (1 << 28) /* Unsupported Request Error Status in function7, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\ + (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\ + (1 << 26) /* Malformed TLP Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\ + (1 << 25) /* Receiver Overflow Status Status in function 7, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\ + (1 << 24) /* Unexpected Completion Status Status in function 7, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\ + (1 << 23) /* Receive UR Statusin function 7. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\ + (1 << 22) /* Completer Timeout Status Status in function 7, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\ + (1 << 21) /* Flow Control Protocol Error Status Status in \ + function 7, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\ + (1 << 20) /* Poisoned Error Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6 (1 << 19) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\ + (1 << 18) /* Unsupported Request Error Status in function6, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\ + (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\ + (1 << 16) /* Malformed TLP Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\ + (1 << 15) /* Receiver Overflow Status Status in function 6, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\ + (1 << 14) /* Unexpected Completion Status Status in function 6, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\ + (1 << 13) /* Receive UR Statusin function 6. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\ + (1 << 12) /* Completer Timeout Status Status in function 6, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\ + (1 << 11) /* Flow Control Protocol Error Status Status in \ + function 6, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\ + (1 << 10) /* Poisoned Error Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5 (1 << 9) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\ + (1 << 8) /* Unsupported Request Error Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\ + (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\ + (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\ + (1 << 5) /* Receiver Overflow Status Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\ + (1 << 4) /* Unexpected Completion Status Status for Function 5, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\ + (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\ + (1 << 2) /* Completer Timeout Status Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\ + (1 << 1) /* Flow Control Protocol Error Status Status for \ + Function 5, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\ + (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ + + +#define BAR_USTRORM_INTMEM 0x400000 +#define BAR_CSTRORM_INTMEM 0x410000 +#define BAR_XSTRORM_INTMEM 0x420000 +#define BAR_TSTRORM_INTMEM 0x430000 + +/* for accessing the IGU in case of status block ACK */ +#define BAR_IGU_INTMEM 0x440000 + +#define BAR_DOORBELL_OFFSET 0x800000 + +#define BAR_ME_REGISTER 0x450000 +#define ME_REG_PF_NUM_SHIFT 0 +#define ME_REG_PF_NUM\ + (7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */ +#define ME_REG_VF_VALID (1<<8) +#define ME_REG_VF_NUM_SHIFT 9 +#define ME_REG_VF_NUM_MASK (0x3f<<ME_REG_VF_NUM_SHIFT) +#define ME_REG_VF_ERR (0x1<<3) +#define ME_REG_ABS_PF_NUM_SHIFT 16 +#define ME_REG_ABS_PF_NUM\ + (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */ + #define MDIO_REG_BANK_CL73_IEEEB0 0x0 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0 @@ -4964,6 +5780,8 @@ #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 @@ -5135,28 +5953,35 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff -#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309 #define MDIO_PMA_REG_8727_TX_CTRL1 0xca02 #define MDIO_PMA_REG_8727_TX_CTRL2 0xca05 #define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808 #define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e +#define MDIO_PMA_REG_8727_PCS_GP 0xc842 + +#define MDIO_AN_REG_8727_MISC_CTRL 0x8309 #define MDIO_PMA_REG_8073_CHIP_REV 0xc801 #define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820 #define MDIO_PMA_REG_8073_XAUI_WA 0xc841 +#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08 #define MDIO_PMA_REG_7101_RESET 0xc000 #define MDIO_PMA_REG_7107_LED_CNTL 0xc007 +#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009 #define MDIO_PMA_REG_7101_VER1 0xc026 #define MDIO_PMA_REG_7101_VER2 0xc027 -#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811 -#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c -#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f -#define MDIO_PMA_REG_8481_LED3_MASK 0xa832 -#define MDIO_PMA_REG_8481_LED3_BLINK 0xa834 -#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835 -#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b +#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811 +#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c +#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f +#define MDIO_PMA_REG_8481_LED3_MASK 0xa832 +#define MDIO_PMA_REG_8481_LED3_BLINK 0xa834 +#define MDIO_PMA_REG_8481_LED5_MASK 0xa838 +#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835 +#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b +#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800 +#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11 #define MDIO_WIS_DEVAD 0x2 @@ -5188,6 +6013,8 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_XS_8706_REG_BANK_RX3 0x80ec #define MDIO_XS_8706_REG_BANK_RXA 0x80fc +#define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA + #define MDIO_AN_DEVAD 0x7 /*ieee*/ #define MDIO_AN_REG_CTRL 0x0000 @@ -5210,14 +6037,40 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_AN_REG_CL37_FC_LP 0xffe5 #define MDIO_AN_REG_8073_2_5G 0x8329 +#define MDIO_AN_REG_8073_BAM 0x8350 +#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 +#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 +#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 +#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 #define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc +/* BCM84823 only */ +#define MDIO_CTL_DEVAD 0x1e +#define MDIO_CTL_REG_84823_MEDIA 0x401a +#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018 + /* These pins configure the BCM84823 interface to MAC after reset. */ +#define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008 +#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010 + /* These pins configure the BCM84823 interface to Line after reset. */ +#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060 +#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020 +#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040 + /* When this pin is active high during reset, 10GBASE-T core is power + * down, When it is active low the 10GBASE-T is power up + */ +#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100 +#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000 + + #define IGU_FUNC_BASE 0x0400 #define IGU_ADDR_MSIX 0x0000 @@ -5239,6 +6092,11 @@ Theotherbitsarereservedandshouldbezero*/ #define IGU_INT_NOP 2 #define IGU_INT_NOP2 3 +#define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup 0 +#define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup 1 +#define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 2 +#define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup 3 + #define COMMAND_REG_INT_ACK 0x0 #define COMMAND_REG_PROD_UPD 0x4 #define COMMAND_REG_ATTN_BITS_UPD 0x8 @@ -5281,6 +6139,50 @@ Theotherbitsarereservedandshouldbezero*/ #define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6 #define IGU_REG_RESERVED_UPPER 0x05ff +/* Fields of IGU PF CONFIGRATION REGISTER */ +#define IGU_PF_CONF_FUNC_EN (0x1<<0) /* function enable */ +#define IGU_PF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */ +#define IGU_PF_CONF_INT_LINE_EN (0x1<<2) /* INT enable */ +#define IGU_PF_CONF_ATTN_BIT_EN (0x1<<3) /* attention enable */ +#define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */ +#define IGU_PF_CONF_SIMD_MODE (0x1<<5) /* simd all ones mode */ + +/* Fields of IGU VF CONFIGRATION REGISTER */ +#define IGU_VF_CONF_FUNC_EN (0x1<<0) /* function enable */ +#define IGU_VF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */ +#define IGU_VF_CONF_PARENT_MASK (0x3<<2) /* Parent PF */ +#define IGU_VF_CONF_PARENT_SHIFT 2 /* Parent PF */ +#define IGU_VF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */ + + +#define IGU_BC_DSB_NUM_SEGS 5 +#define IGU_BC_NDSB_NUM_SEGS 2 +#define IGU_NORM_DSB_NUM_SEGS 2 +#define IGU_NORM_NDSB_NUM_SEGS 1 +#define IGU_BC_BASE_DSB_PROD 128 +#define IGU_NORM_BASE_DSB_PROD 136 + +#define IGU_CTRL_CMD_TYPE_WR\ + 1 +#define IGU_CTRL_CMD_TYPE_RD\ + 0 + +#define IGU_SEG_ACCESS_NORM 0 +#define IGU_SEG_ACCESS_DEF 1 +#define IGU_SEG_ACCESS_ATTN 2 + + /* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \ + [5:2] = 0; [1:0] = PF number) */ +#define IGU_FID_ENCODE_IS_PF (0x1<<6) +#define IGU_FID_ENCODE_IS_PF_SHIFT 6 +#define IGU_FID_VF_NUM_MASK (0x3f) +#define IGU_FID_PF_NUM_MASK (0x7) + +#define IGU_REG_MAPPING_MEMORY_VALID (1<<0) +#define IGU_REG_MAPPING_MEMORY_VECTOR_MASK (0x3F<<1) +#define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT 1 +#define IGU_REG_MAPPING_MEMORY_FID_MASK (0x7F<<7) +#define IGU_REG_MAPPING_MEMORY_FID_SHIFT 7 #define CDU_REGION_NUMBER_XCM_AG 2 |
