summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig1
-rw-r--r--drivers/mfd/ab5500-core.h87
-rw-r--r--drivers/mfd/mc13xxx-spi.c67
-rw-r--r--drivers/mfd/omap-usb-host.c48
-rw-r--r--drivers/mfd/palmas.c13
-rw-r--r--drivers/mfd/stmpe-i2c.c2
-rw-r--r--drivers/mfd/stmpe-spi.c4
7 files changed, 128 insertions, 94 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e129c820df7d..92144ed1ad46 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -286,6 +286,7 @@ config TWL6040_CORE
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
+ select IRQ_DOMAIN
default n
help
Say yes here if you want support for Texas Instruments TWL6040 audio
diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h
deleted file mode 100644
index 63b30b17e4f3..000000000000
--- a/drivers/mfd/ab5500-core.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Shared definitions and data structures for the AB5500 MFD driver
- */
-
-/* Read/write operation values. */
-#define AB5500_PERM_RD (0x01)
-#define AB5500_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB5500_PERM_RO (AB5500_PERM_RD)
-#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
-
-#define AB5500_MASK_BASE (0x60)
-#define AB5500_MASK_END (0x79)
-#define AB5500_CHIP_ID (0x20)
-
-/**
- * struct ab5500_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab5500_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab5500_i2c_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_ranges {
- u8 nranges;
- u8 bankid;
- const struct ab5500_reg_range *range;
-};
-
-/**
- * struct ab5500_i2c_banks
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_banks {
- u8 nbanks;
- const struct ab5500_i2c_ranges *bank;
-};
-
-/**
- * struct ab5500_bank
- * @slave_addr: I2C slave_addr found in AB5500 specification
- * @name: Documentation name of the bank. For reference
- */
-struct ab5500_bank {
- u8 slave_addr;
- const char *name;
-};
-
-static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
- [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
- [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
- [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
- [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
- [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
- [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
- [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
- [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
- [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
- [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
- [AB5500_BANK_FG_BATTCOM_ACC] = {
- AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
- [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
- [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
- [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
- [AB5500_BANK_AUDIO_HEADSETUSB] = {
- AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
-};
-
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
- u8 *value);
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues);
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 3fcdab3eb8eb..03df422feb76 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -49,10 +49,72 @@ static struct regmap_config mc13xxx_regmap_spi_config = {
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 24,
+ .write_flag_mask = 0x80,
.max_register = MC13XXX_NUMREGS,
.cache_type = REGCACHE_NONE,
+ .use_single_rw = 1,
+};
+
+static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0};
+ unsigned char r[4];
+ unsigned char *p = val;
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer t = {
+ .tx_buf = w,
+ .rx_buf = r,
+ .len = 4,
+ };
+
+ struct spi_message m;
+ int ret;
+
+ if (val_size != 3 || reg_size != 1)
+ return -ENOTSUPP;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(spi, &m);
+
+ memcpy(p, &r[1], 3);
+
+ return ret;
+}
+
+static int mc13xxx_spi_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ if (count != 4)
+ return -ENOTSUPP;
+
+ return spi_write(spi, data, count);
+}
+
+/*
+ * We cannot use regmap-spi generic bus implementation here.
+ * The MC13783 chip will get corrupted if CS signal is deasserted
+ * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller
+ * has the following errata (DSPhl22960):
+ * "The CSPI negates SS when the FIFO becomes empty with
+ * SSCTL= 0. Software cannot guarantee that the FIFO will not
+ * drain because of higher priority interrupts and the
+ * non-realtime characteristics of the operating system. As a
+ * result, the SS will negate before all of the data has been
+ * transferred to/from the peripheral."
+ * We workaround this by accessing the SPI controller with a
+ * single transfert.
+ */
+
+static struct regmap_bus regmap_mc13xxx_bus = {
+ .write = mc13xxx_spi_write,
+ .read = mc13xxx_spi_read,
};
static int mc13xxx_spi_probe(struct spi_device *spi)
@@ -73,12 +135,13 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
dev_set_drvdata(&spi->dev, mc13xxx);
spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
- spi->bits_per_word = 32;
mc13xxx->dev = &spi->dev;
mutex_init(&mc13xxx->lock);
- mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config);
+ mc13xxx->regmap = regmap_init(&spi->dev, &regmap_mc13xxx_bus, &spi->dev,
+ &mc13xxx_regmap_spi_config);
+
if (IS_ERR(mc13xxx->regmap)) {
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 7e96bb229724..41088ecbb2a9 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
+#include <linux/gpio.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
@@ -500,8 +501,21 @@ static void omap_usbhs_init(struct device *dev)
dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
- spin_lock_irqsave(&omap->lock, flags);
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
@@ -581,9 +595,39 @@ static void omap_usbhs_init(struct device *dev)
}
spin_unlock_irqrestore(&omap->lock, flags);
+
+ if (pdata->ehci_data->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[1], 1);
+ }
+
pm_runtime_put_sync(dev);
}
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ }
+}
+
/**
* usbhs_omap_probe - initialize TI-based HCDs
@@ -767,6 +811,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
goto end_probe;
err_alloc:
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
err_tll:
@@ -818,6 +863,7 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev)
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 00c0aba7eba0..c4a69f193a1d 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -356,7 +356,14 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c,
}
}
- ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq,
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
+ addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
+ reg = PALMAS_INT_CTRL_INT_CLEAR;
+
+ regmap_write(palmas->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
@@ -441,6 +448,9 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c,
goto err;
}
+ children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata;
+ children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata);
+
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
NULL, regmap_irq_chip_get_base(palmas->irq_data));
@@ -472,6 +482,7 @@ static const struct i2c_device_id palmas_i2c_id[] = {
{ "twl6035", },
{ "twl6037", },
{ "tps65913", },
+ { /* end */ }
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 373f423b1181..947a06a1845f 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -6,7 +6,7 @@
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/i2c.h>
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index afd459013ecb..9edfe864cc05 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -4,7 +4,7 @@
* Copyright (C) ST Microelectronics SA 2011
*
* License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/spi/spi.h>
@@ -146,4 +146,4 @@ module_exit(stmpe_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
OpenPOWER on IntegriCloud