summaryrefslogtreecommitdiffstats
path: root/drivers/media/pci/cx18
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/pci/cx18')
-rw-r--r--drivers/media/pci/cx18/cx18-alsa-pcm.c2
-rw-r--r--drivers/media/pci/cx18/cx18-av-audio.c2
-rw-r--r--drivers/media/pci/cx18/cx18-av-core.c18
-rw-r--r--drivers/media/pci/cx18/cx18-av-core.h2
-rw-r--r--drivers/media/pci/cx18/cx18-cards.c8
-rw-r--r--drivers/media/pci/cx18/cx18-cards.h32
-rw-r--r--drivers/media/pci/cx18/cx18-driver.h46
-rw-r--r--drivers/media/pci/cx18/cx18-firmware.c96
-rw-r--r--drivers/media/pci/cx18/cx18-mailbox.c8
-rw-r--r--drivers/media/pci/cx18/cx18-streams.c2
-rw-r--r--drivers/media/pci/cx18/cx18-vbi.c2
-rw-r--r--drivers/media/pci/cx18/cx23418.h88
12 files changed, 153 insertions, 153 deletions
diff --git a/drivers/media/pci/cx18/cx18-alsa-pcm.c b/drivers/media/pci/cx18/cx18-alsa-pcm.c
index aadd76466aec..4f31042a442a 100644
--- a/drivers/media/pci/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/pci/cx18/cx18-alsa-pcm.c
@@ -41,7 +41,7 @@ MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm");
#define dprintk(fmt, arg...) do { \
if (pcm_debug) \
printk(KERN_INFO "cx18-alsa-pcm %s: " fmt, \
- __func__, ##arg); \
+ __func__, ##arg); \
} while (0)
static const struct snd_pcm_hardware snd_cx18_hw_capture = {
diff --git a/drivers/media/pci/cx18/cx18-av-audio.c b/drivers/media/pci/cx18/cx18-av-audio.c
index 8b95e9aae576..3abc54cbe4a1 100644
--- a/drivers/media/pci/cx18/cx18-av-audio.c
+++ b/drivers/media/pci/cx18/cx18-av-audio.c
@@ -31,7 +31,7 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
* would ideally be:
*
* NTSC Color subcarrier freq * 8 =
- * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+ * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
*
* The accidents of history and rationale that explain from where this
* combination of magic numbers originate can be found in:
diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c
index cf8817e9c8b9..eda343322ee0 100644
--- a/drivers/media/pci/cx18/cx18-av-core.c
+++ b/drivers/media/pci/cx18/cx18-av-core.c
@@ -236,10 +236,10 @@ static void cx18_av_initialize(struct v4l2_subdev *sd)
*/
cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00);
-/* if(dwEnable && dw3DCombAvailable) { */
-/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
+/* if(dwEnable && dw3DCombAvailable) { */
+/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
/* } else { */
-/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
+/* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
/* } */
cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F);
default_volume = cx18_av_read(cx, 0x8d4);
@@ -319,13 +319,13 @@ void cx18_av_std_setup(struct cx18 *cx)
* vblank656: half lines after line 625/mid-313 of blanked video
* vblank: half lines, after line 5/317, of blanked video
* vactive: half lines of active video +
- * 5 half lines after the end of active video
+ * 5 half lines after the end of active video
*
* As far as I can tell:
* vblank656 starts counting from the falling edge of the first
- * vsync pulse (start of line 1 or mid-313)
+ * vsync pulse (start of line 1 or mid-313)
* vblank starts counting from the after the 5 vsync pulses and
- * 5 or 4 equalization pulses (start of line 6 or 318)
+ * 5 or 4 equalization pulses (start of line 6 or 318)
*
* For 625 line systems the driver will extract VBI information
* from lines 6-23 and lines 318-335 (but the slicer can only
@@ -395,9 +395,9 @@ void cx18_av_std_setup(struct cx18 *cx)
*
* As far as I can tell:
* vblank656 starts counting from the falling edge of the first
- * vsync pulse (start of line 4 or mid-266)
+ * vsync pulse (start of line 4 or mid-266)
* vblank starts counting from the after the 6 vsync pulses and
- * 6 or 5 equalization pulses (start of line 10 or 272)
+ * 6 or 5 equalization pulses (start of line 10 or 272)
*
* For 525 line systems the driver will extract VBI information
* from lines 10-21 and lines 273-284.
@@ -851,7 +851,7 @@ static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
struct cx18_av_state *state = to_cx18_av_state(sd);
struct cx18 *cx = v4l2_get_subdevdata(sd);
- u8 fmt = 0; /* zero is autodetect */
+ u8 fmt = 0; /* zero is autodetect */
u8 pal_m = 0;
if (state->radio == 0 && state->std == norm)
diff --git a/drivers/media/pci/cx18/cx18-av-core.h b/drivers/media/pci/cx18/cx18-av-core.h
index c976ce6e7a78..1a37f269d2e4 100644
--- a/drivers/media/pci/cx18/cx18-av-core.h
+++ b/drivers/media/pci/cx18/cx18-av-core.h
@@ -349,7 +349,7 @@ static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
}
/* ----------------------------------------------------------------------- */
-/* cx18_av-core.c */
+/* cx18_av-core.c */
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value);
diff --git a/drivers/media/pci/cx18/cx18-cards.c b/drivers/media/pci/cx18/cx18-cards.c
index 11e898e66ce9..c2cf965d639e 100644
--- a/drivers/media/pci/cx18/cx18-cards.c
+++ b/drivers/media/pci/cx18/cx18-cards.c
@@ -388,7 +388,7 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = {
{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
{ CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
{ CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 },
},
@@ -439,7 +439,7 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
{ CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
},
.tuners = {
@@ -485,7 +485,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
{ CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
{ CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
},
.tuners = {
@@ -538,7 +538,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = {
{ CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
{ CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
},
.tuners = {
diff --git a/drivers/media/pci/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h
index 5478f62b5cf3..02d0fb703a41 100644
--- a/drivers/media/pci/cx18/cx18-cards.h
+++ b/drivers/media/pci/cx18/cx18-cards.h
@@ -29,20 +29,20 @@
/* video inputs */
#define CX18_CARD_INPUT_VID_TUNER 1
-#define CX18_CARD_INPUT_SVIDEO1 2
-#define CX18_CARD_INPUT_SVIDEO2 3
-#define CX18_CARD_INPUT_COMPOSITE1 4
-#define CX18_CARD_INPUT_COMPOSITE2 5
-#define CX18_CARD_INPUT_COMPONENT1 6
+#define CX18_CARD_INPUT_SVIDEO1 2
+#define CX18_CARD_INPUT_SVIDEO2 3
+#define CX18_CARD_INPUT_COMPOSITE1 4
+#define CX18_CARD_INPUT_COMPOSITE2 5
+#define CX18_CARD_INPUT_COMPONENT1 6
/* audio inputs */
#define CX18_CARD_INPUT_AUD_TUNER 1
-#define CX18_CARD_INPUT_LINE_IN1 2
-#define CX18_CARD_INPUT_LINE_IN2 3
+#define CX18_CARD_INPUT_LINE_IN1 2
+#define CX18_CARD_INPUT_LINE_IN2 3
#define CX18_CARD_MAX_VIDEO_INPUTS 6
#define CX18_CARD_MAX_AUDIO_INPUTS 3
-#define CX18_CARD_MAX_TUNERS 2
+#define CX18_CARD_MAX_TUNERS 2
/* V4L2 capability aliases */
#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
@@ -51,7 +51,7 @@
V4L2_CAP_SLICED_VBI_CAPTURE)
struct cx18_card_video_input {
- u8 video_type; /* video input type */
+ u8 video_type; /* video input type */
u8 audio_index; /* index in cx18_card_audio_input array */
u32 video_input; /* hardware video input */
};
@@ -74,7 +74,7 @@ struct cx18_card_pci_info {
/* The mask is the set of bits used by the operation */
struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
- u32 direction; /* DIR setting. Leave to 0 if no init is needed */
+ u32 direction; /* DIR setting. Leave to 0 if no init is needed */
u32 initial_value;
};
@@ -86,16 +86,16 @@ struct cx18_gpio_i2c_slave_reset {
u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR contoller */
};
-struct cx18_gpio_audio_input { /* select tuner/line in input */
- u32 mask; /* leave to 0 if not supported */
+struct cx18_gpio_audio_input { /* select tuner/line in input */
+ u32 mask; /* leave to 0 if not supported */
u32 tuner;
u32 linein;
u32 radio;
};
struct cx18_card_tuner {
- v4l2_std_id std; /* standard for which the tuner is suitable */
- int tuner; /* tuner ID (from tuner.h) */
+ v4l2_std_id std; /* standard for which the tuner is suitable */
+ int tuner; /* tuner ID (from tuner.h) */
};
struct cx18_card_tuner_i2c {
@@ -128,8 +128,8 @@ struct cx18_card {
struct cx18_card_audio_input radio_input;
/* GPIO card-specific settings */
- u8 xceive_pin; /* XCeive tuner GPIO reset pin */
- struct cx18_gpio_init gpio_init;
+ u8 xceive_pin; /* XCeive tuner GPIO reset pin */
+ struct cx18_gpio_init gpio_init;
struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
struct cx18_gpio_audio_input gpio_audio_input;
diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h
index 3492023a8675..0b707faca543 100644
--- a/drivers/media/pci/cx18/cx18-driver.h
+++ b/drivers/media/pci/cx18/cx18-driver.h
@@ -75,8 +75,8 @@
/* Supported cards */
#define CX18_CARD_HVR_1600_ESMT 0 /* Hauppauge HVR 1600 (ESMT memory) */
#define CX18_CARD_HVR_1600_SAMSUNG 1 /* Hauppauge HVR 1600 (Samsung memory) */
-#define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */
-#define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */
+#define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */
+#define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */
#define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */
#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
@@ -99,9 +99,9 @@
#define PCI_DEVICE_ID_CX23418 0x5b7a
/* subsystem vendor ID */
-#define CX18_PCI_ID_HAUPPAUGE 0x0070
-#define CX18_PCI_ID_COMPRO 0x185b
-#define CX18_PCI_ID_YUAN 0x12ab
+#define CX18_PCI_ID_HAUPPAUGE 0x0070
+#define CX18_PCI_ID_COMPRO 0x185b
+#define CX18_PCI_ID_YUAN 0x12ab
#define CX18_PCI_ID_CONEXANT 0x14f1
#define CX18_PCI_ID_TOSHIBA 0x1179
#define CX18_PCI_ID_LEADTEK 0x107D
@@ -260,7 +260,7 @@ struct cx18_options {
#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianness swapped */
/* per-stream, s_flags */
-#define CX18_F_S_CLAIMED 3 /* this stream is claimed */
+#define CX18_F_S_CLAIMED 3 /* this stream is claimed */
#define CX18_F_S_STREAMING 4 /* the fw is decoding/encoding this stream */
#define CX18_F_S_INTERNAL_USE 5 /* this stream is used internally (sliced VBI processing) */
#define CX18_F_S_STREAMOFF 7 /* signal end of stream EOS */
@@ -268,12 +268,12 @@ struct cx18_options {
#define CX18_F_S_STOPPING 9 /* telling the fw to stop capturing */
/* per-cx18, i_flags */
-#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */
-#define CX18_F_I_EOS 4 /* End of encoder stream */
-#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */
-#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */
-#define CX18_F_I_INITED 21 /* set after first open */
-#define CX18_F_I_FAILED 22 /* set if first open failed */
+#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */
+#define CX18_F_I_EOS 4 /* End of encoder stream */
+#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */
+#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */
+#define CX18_F_I_INITED 21 /* set after first open */
+#define CX18_F_I_FAILED 22 /* set if first open failed */
/* These are the VBI types as they appear in the embedded VBI private packets. */
#define CX18_SLICED_TYPE_TELETEXT_B (1)
@@ -370,7 +370,7 @@ struct cx18_stream {
is not actually created. */
struct video_device video_dev; /* v4l2_dev is NULL when stream not created */
struct cx18_dvb *dvb; /* DVB / Digital Transport */
- struct cx18 *cx; /* for ease of use */
+ struct cx18 *cx; /* for ease of use */
const char *name; /* name of the stream */
int type; /* stream type */
u32 handle; /* task handle */
@@ -525,14 +525,14 @@ struct vbi_info {
* into the MPEG PS stream.
*
* In each sliced_mpeg_data[] buffer is:
- * 16 byte MPEG-2 PS Program Pack Header
- * 16 byte MPEG-2 Private Stream 1 PES Header
- * 4 byte magic number: "itv0" or "ITV0"
- * 4 byte first field line mask, if "itv0"
- * 4 byte second field line mask, if "itv0"
- * 36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
+ * 16 byte MPEG-2 PS Program Pack Header
+ * 16 byte MPEG-2 Private Stream 1 PES Header
+ * 4 byte magic number: "itv0" or "ITV0"
+ * 4 byte first field line mask, if "itv0"
+ * 4 byte second field line mask, if "itv0"
+ * 36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
*
- * Each line in the payload is
+ * Each line in the payload is
* 1 byte line header derived from the SDID (WSS, CC, VPS, etc.)
* 42 bytes of line data
*
@@ -583,7 +583,7 @@ struct cx18 {
u8 nof_inputs; /* number of video inputs */
u8 nof_audio_inputs; /* number of audio inputs */
u32 v4l2_cap; /* V4L2 capabilities of card */
- u32 hw_flags; /* Hardware description of the board */
+ u32 hw_flags; /* Hardware description of the board */
unsigned int free_mdl_idx;
struct cx18_scb __iomem *scb; /* pointer to SCB */
struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
@@ -602,10 +602,10 @@ struct cx18 {
u32 dualwatch_stereo_mode;
struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */
- struct cx18_options options; /* User options */
+ struct cx18_options options; /* User options */
int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
- struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
+ struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */
void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data,
size_t num_bytes);
diff --git a/drivers/media/pci/cx18/cx18-firmware.c b/drivers/media/pci/cx18/cx18-firmware.c
index 1b34ea1c3730..498a1854b3b0 100644
--- a/drivers/media/pci/cx18/cx18-firmware.c
+++ b/drivers/media/pci/cx18/cx18-firmware.c
@@ -23,65 +23,65 @@
#include "cx18-cards.h"
#include <linux/firmware.h>
-#define CX18_PROC_SOFT_RESET 0xc70010
-#define CX18_DDR_SOFT_RESET 0xc70014
-#define CX18_CLOCK_SELECT1 0xc71000
-#define CX18_CLOCK_SELECT2 0xc71004
-#define CX18_HALF_CLOCK_SELECT1 0xc71008
-#define CX18_HALF_CLOCK_SELECT2 0xc7100C
-#define CX18_CLOCK_POLARITY1 0xc71010
-#define CX18_CLOCK_POLARITY2 0xc71014
-#define CX18_ADD_DELAY_ENABLE1 0xc71018
-#define CX18_ADD_DELAY_ENABLE2 0xc7101C
-#define CX18_CLOCK_ENABLE1 0xc71020
-#define CX18_CLOCK_ENABLE2 0xc71024
-
-#define CX18_REG_BUS_TIMEOUT_EN 0xc72024
-
-#define CX18_FAST_CLOCK_PLL_INT 0xc78000
-#define CX18_FAST_CLOCK_PLL_FRAC 0xc78004
-#define CX18_FAST_CLOCK_PLL_POST 0xc78008
-#define CX18_FAST_CLOCK_PLL_PRESCALE 0xc7800C
+#define CX18_PROC_SOFT_RESET 0xc70010
+#define CX18_DDR_SOFT_RESET 0xc70014
+#define CX18_CLOCK_SELECT1 0xc71000
+#define CX18_CLOCK_SELECT2 0xc71004
+#define CX18_HALF_CLOCK_SELECT1 0xc71008
+#define CX18_HALF_CLOCK_SELECT2 0xc7100C
+#define CX18_CLOCK_POLARITY1 0xc71010
+#define CX18_CLOCK_POLARITY2 0xc71014
+#define CX18_ADD_DELAY_ENABLE1 0xc71018
+#define CX18_ADD_DELAY_ENABLE2 0xc7101C
+#define CX18_CLOCK_ENABLE1 0xc71020
+#define CX18_CLOCK_ENABLE2 0xc71024
+
+#define CX18_REG_BUS_TIMEOUT_EN 0xc72024
+
+#define CX18_FAST_CLOCK_PLL_INT 0xc78000
+#define CX18_FAST_CLOCK_PLL_FRAC 0xc78004
+#define CX18_FAST_CLOCK_PLL_POST 0xc78008
+#define CX18_FAST_CLOCK_PLL_PRESCALE 0xc7800C
#define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010
-#define CX18_SLOW_CLOCK_PLL_INT 0xc78014
-#define CX18_SLOW_CLOCK_PLL_FRAC 0xc78018
-#define CX18_SLOW_CLOCK_PLL_POST 0xc7801C
+#define CX18_SLOW_CLOCK_PLL_INT 0xc78014
+#define CX18_SLOW_CLOCK_PLL_FRAC 0xc78018
+#define CX18_SLOW_CLOCK_PLL_POST 0xc7801C
#define CX18_MPEG_CLOCK_PLL_INT 0xc78040
#define CX18_MPEG_CLOCK_PLL_FRAC 0xc78044
#define CX18_MPEG_CLOCK_PLL_POST 0xc78048
-#define CX18_PLL_POWER_DOWN 0xc78088
+#define CX18_PLL_POWER_DOWN 0xc78088
#define CX18_SW1_INT_STATUS 0xc73104
#define CX18_SW1_INT_ENABLE_PCI 0xc7311C
#define CX18_SW2_INT_SET 0xc73140
#define CX18_SW2_INT_STATUS 0xc73144
-#define CX18_ADEC_CONTROL 0xc78120
+#define CX18_ADEC_CONTROL 0xc78120
-#define CX18_DDR_REQUEST_ENABLE 0xc80000
-#define CX18_DDR_CHIP_CONFIG 0xc80004
-#define CX18_DDR_REFRESH 0xc80008
-#define CX18_DDR_TIMING1 0xc8000C
-#define CX18_DDR_TIMING2 0xc80010
+#define CX18_DDR_REQUEST_ENABLE 0xc80000
+#define CX18_DDR_CHIP_CONFIG 0xc80004
+#define CX18_DDR_REFRESH 0xc80008
+#define CX18_DDR_TIMING1 0xc8000C
+#define CX18_DDR_TIMING2 0xc80010
#define CX18_DDR_POWER_REG 0xc8001C
-#define CX18_DDR_TUNE_LANE 0xc80048
-#define CX18_DDR_INITIAL_EMRS 0xc80054
-#define CX18_DDR_MB_PER_ROW_7 0xc8009C
-#define CX18_DDR_BASE_63_ADDR 0xc804FC
-
-#define CX18_WMB_CLIENT02 0xc90108
-#define CX18_WMB_CLIENT05 0xc90114
-#define CX18_WMB_CLIENT06 0xc90118
-#define CX18_WMB_CLIENT07 0xc9011C
-#define CX18_WMB_CLIENT08 0xc90120
-#define CX18_WMB_CLIENT09 0xc90124
-#define CX18_WMB_CLIENT10 0xc90128
-#define CX18_WMB_CLIENT11 0xc9012C
-#define CX18_WMB_CLIENT12 0xc90130
-#define CX18_WMB_CLIENT13 0xc90134
-#define CX18_WMB_CLIENT14 0xc90138
-
-#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
+#define CX18_DDR_TUNE_LANE 0xc80048
+#define CX18_DDR_INITIAL_EMRS 0xc80054
+#define CX18_DDR_MB_PER_ROW_7 0xc8009C
+#define CX18_DDR_BASE_63_ADDR 0xc804FC
+
+#define CX18_WMB_CLIENT02 0xc90108
+#define CX18_WMB_CLIENT05 0xc90114
+#define CX18_WMB_CLIENT06 0xc90118
+#define CX18_WMB_CLIENT07 0xc9011C
+#define CX18_WMB_CLIENT08 0xc90120
+#define CX18_WMB_CLIENT09 0xc90124
+#define CX18_WMB_CLIENT10 0xc90128
+#define CX18_WMB_CLIENT11 0xc9012C
+#define CX18_WMB_CLIENT12 0xc90130
+#define CX18_WMB_CLIENT13 0xc90134
+#define CX18_WMB_CLIENT14 0xc90138
+
+#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
#define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
#define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
@@ -229,7 +229,7 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
* would ideally be:
*
* NTSC Color subcarrier freq * 8 =
- * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+ * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
*
* The accidents of history and rationale that explain from where this
* combination of magic numbers originate can be found in:
diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c
index 763f960fc918..f66dd63e1994 100644
--- a/drivers/media/pci/cx18/cx18-mailbox.c
+++ b/drivers/media/pci/cx18/cx18-mailbox.c
@@ -35,7 +35,7 @@ struct cx18_api_info {
u32 cmd;
u8 flags; /* Flags, see above */
u8 rpu; /* Processing unit */
- const char *name; /* The name of the command */
+ const char *name; /* The name of the command */
};
#define API_ENTRY(rpu, x, f) { (x), (f), (rpu), #x }
@@ -43,9 +43,9 @@ struct cx18_api_info {
static const struct cx18_api_info api_info[] = {
/* MPEG encoder API */
API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE, 0),
- API_ENTRY(CPU, CX18_EPU_DEBUG, 0),
- API_ENTRY(CPU, CX18_CREATE_TASK, 0),
- API_ENTRY(CPU, CX18_DESTROY_TASK, 0),
+ API_ENTRY(CPU, CX18_EPU_DEBUG, 0),
+ API_ENTRY(CPU, CX18_CREATE_TASK, 0),
+ API_ENTRY(CPU, CX18_DESTROY_TASK, 0),
API_ENTRY(CPU, CX18_CPU_CAPTURE_START, API_SLOW),
API_ENTRY(CPU, CX18_CPU_CAPTURE_STOP, API_SLOW),
API_ENTRY(CPU, CX18_CPU_CAPTURE_PAUSE, 0),
diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c
index b9c6831c21c3..a594cfdeca20 100644
--- a/drivers/media/pci/cx18/cx18-streams.c
+++ b/drivers/media/pci/cx18/cx18-streams.c
@@ -29,7 +29,7 @@
#include "cx18-scb.h"
#include "cx18-dvb.h"
-#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
+#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
static const struct v4l2_file_operations cx18_v4l2_enc_fops = {
.owner = THIS_MODULE,
diff --git a/drivers/media/pci/cx18/cx18-vbi.c b/drivers/media/pci/cx18/cx18-vbi.c
index 72c74d60c6fb..81f1e27436fd 100644
--- a/drivers/media/pci/cx18/cx18-vbi.c
+++ b/drivers/media/pci/cx18/cx18-vbi.c
@@ -47,7 +47,7 @@ static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp)
0x00, 0x00, 0x01, 0xbd, /* Priv Stream 1 start */
0x00, 0x1a, /* length */
0x84, 0x80, 0x07, /* flags, hdr data len */
- 0x21, 0x00, 0x5d, 0x63, 0xa7, /* PTS, markers */
+ 0x21, 0x00, 0x5d, 0x63, 0xa7, /* PTS, markers */
0xff, 0xff /* stuffing */
};
const int sd = sizeof(mpeg_hdr_data); /* start of vbi data */
diff --git a/drivers/media/pci/cx18/cx23418.h b/drivers/media/pci/cx18/cx23418.h
index 901ed7fac10f..15205b662952 100644
--- a/drivers/media/pci/cx18/cx23418.h
+++ b/drivers/media/pci/cx18/cx23418.h
@@ -19,10 +19,10 @@
#include <media/drv-intf/cx2341x.h>
-#define MGR_CMD_MASK 0x40000000
+#define MGR_CMD_MASK 0x40000000
/* The MSB of the command code indicates that this is the completion of a
command */
-#define MGR_CMD_MASK_ACK (MGR_CMD_MASK | 0x80000000)
+#define MGR_CMD_MASK_ACK (MGR_CMD_MASK | 0x80000000)
/* Description: This command creates a new instance of a certain task
IN[0] - Task ID. This is one of the XPU_CMD_MASK_YYY where XPU is
@@ -30,26 +30,26 @@
OUT[0] - Task handle. This handle is passed along with commands to
dispatch to the right instance of the task
ReturnCode - One of the ERR_SYS_... */
-#define CX18_CREATE_TASK (MGR_CMD_MASK | 0x0001)
+#define CX18_CREATE_TASK (MGR_CMD_MASK | 0x0001)
/* Description: This command destroys an instance of a task
IN[0] - Task handle. Hanlde of the task to destroy
ReturnCode - One of the ERR_SYS_... */
-#define CX18_DESTROY_TASK (MGR_CMD_MASK | 0x0002)
+#define CX18_DESTROY_TASK (MGR_CMD_MASK | 0x0002)
/* All commands for CPU have the following mask set */
-#define CPU_CMD_MASK 0x20000000
-#define CPU_CMD_MASK_DEBUG (CPU_CMD_MASK | 0x00000000)
-#define CPU_CMD_MASK_ACK (CPU_CMD_MASK | 0x80000000)
-#define CPU_CMD_MASK_CAPTURE (CPU_CMD_MASK | 0x00020000)
-#define CPU_CMD_MASK_TS (CPU_CMD_MASK | 0x00040000)
+#define CPU_CMD_MASK 0x20000000
+#define CPU_CMD_MASK_DEBUG (CPU_CMD_MASK | 0x00000000)
+#define CPU_CMD_MASK_ACK (CPU_CMD_MASK | 0x80000000)
+#define CPU_CMD_MASK_CAPTURE (CPU_CMD_MASK | 0x00020000)
+#define CPU_CMD_MASK_TS (CPU_CMD_MASK | 0x00040000)
-#define EPU_CMD_MASK 0x02000000
-#define EPU_CMD_MASK_DEBUG (EPU_CMD_MASK | 0x000000)
-#define EPU_CMD_MASK_DE (EPU_CMD_MASK | 0x040000)
+#define EPU_CMD_MASK 0x02000000
+#define EPU_CMD_MASK_DEBUG (EPU_CMD_MASK | 0x000000)
+#define EPU_CMD_MASK_DE (EPU_CMD_MASK | 0x040000)
-#define APU_CMD_MASK 0x10000000
-#define APU_CMD_MASK_ACK (APU_CMD_MASK | 0x80000000)
+#define APU_CMD_MASK 0x10000000
+#define APU_CMD_MASK_ACK (APU_CMD_MASK | 0x80000000)
#define CX18_APU_ENCODING_METHOD_MPEG (0 << 28)
#define CX18_APU_ENCODING_METHOD_AC3 (1 << 28)
@@ -67,7 +67,7 @@
/* Description: Command APU to reset the AI
ReturnCode - ??? */
-#define CX18_APU_RESETAI (APU_CMD_MASK | 0x05)
+#define CX18_APU_RESETAI (APU_CMD_MASK | 0x05)
/* Description: This command indicates that a Memory Descriptor List has been
filled with the requested channel type
@@ -75,13 +75,13 @@
IN[1] - Offset of the MDL_ACK from the beginning of the local DDR.
IN[2] - Number of CNXT_MDL_ACK structures in the array pointed to by IN[1]
ReturnCode - One of the ERR_DE_... */
-#define CX18_EPU_DMA_DONE (EPU_CMD_MASK_DE | 0x0001)
+#define CX18_EPU_DMA_DONE (EPU_CMD_MASK_DE | 0x0001)
/* Something interesting happened
IN[0] - A value to log
IN[1] - An offset of a string in the MiniMe memory;
0/zero/NULL means "I have nothing to say" */
-#define CX18_EPU_DEBUG (EPU_CMD_MASK_DEBUG | 0x0003)
+#define CX18_EPU_DEBUG (EPU_CMD_MASK_DEBUG | 0x0003)
/* Reads memory/registers (32-bit)
IN[0] - Address
@@ -91,40 +91,40 @@
/* Description: This command starts streaming with the set channel type
IN[0] - Task handle. Handle of the task to start
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_START (CPU_CMD_MASK_CAPTURE | 0x0002)
+#define CX18_CPU_CAPTURE_START (CPU_CMD_MASK_CAPTURE | 0x0002)
/* Description: This command stops streaming with the set channel type
IN[0] - Task handle. Handle of the task to stop
IN[1] - 0 = stop at end of GOP, 1 = stop at end of frame (MPEG only)
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_STOP (CPU_CMD_MASK_CAPTURE | 0x0003)
+#define CX18_CPU_CAPTURE_STOP (CPU_CMD_MASK_CAPTURE | 0x0003)
/* Description: This command pauses streaming with the set channel type
IN[0] - Task handle. Handle of the task to pause
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_PAUSE (CPU_CMD_MASK_CAPTURE | 0x0007)
+#define CX18_CPU_CAPTURE_PAUSE (CPU_CMD_MASK_CAPTURE | 0x0007)
/* Description: This command resumes streaming with the set channel type
IN[0] - Task handle. Handle of the task to resume
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_RESUME (CPU_CMD_MASK_CAPTURE | 0x0008)
-
-#define CAPTURE_CHANNEL_TYPE_NONE 0
-#define CAPTURE_CHANNEL_TYPE_MPEG 1
-#define CAPTURE_CHANNEL_TYPE_INDEX 2
-#define CAPTURE_CHANNEL_TYPE_YUV 3
-#define CAPTURE_CHANNEL_TYPE_PCM 4
-#define CAPTURE_CHANNEL_TYPE_VBI 5
+#define CX18_CPU_CAPTURE_RESUME (CPU_CMD_MASK_CAPTURE | 0x0008)
+
+#define CAPTURE_CHANNEL_TYPE_NONE 0
+#define CAPTURE_CHANNEL_TYPE_MPEG 1
+#define CAPTURE_CHANNEL_TYPE_INDEX 2
+#define CAPTURE_CHANNEL_TYPE_YUV 3
+#define CAPTURE_CHANNEL_TYPE_PCM 4
+#define CAPTURE_CHANNEL_TYPE_VBI 5
#define CAPTURE_CHANNEL_TYPE_SLICED_VBI 6
#define CAPTURE_CHANNEL_TYPE_TS 7
-#define CAPTURE_CHANNEL_TYPE_MAX 15
+#define CAPTURE_CHANNEL_TYPE_MAX 15
/* Description: This command sets the channel type. This can only be done
when stopped.
IN[0] - Task handle. Handle of the task to start
IN[1] - Channel Type. See Below.
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_CHANNEL_TYPE (CPU_CMD_MASK_CAPTURE + 1)
+#define CX18_CPU_SET_CHANNEL_TYPE (CPU_CMD_MASK_CAPTURE + 1)
/* Description: Set stream output type
IN[0] - task handle. Handle of the task to start
@@ -140,7 +140,7 @@
IN[4] - reserved
IN[5] - frame rate, 0 - 29.97f/s, 1 - 25f/s
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_VIDEO_IN (CPU_CMD_MASK_CAPTURE | 0x0004)
+#define CX18_CPU_SET_VIDEO_IN (CPU_CMD_MASK_CAPTURE | 0x0004)
/* Description: Set video frame rate
IN[0] - task handle. Handle of the task to start
@@ -149,7 +149,7 @@
IN[3] - video peak rate
IN[4] - system mux rate
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_VIDEO_RATE (CPU_CMD_MASK_CAPTURE | 0x0005)
+#define CX18_CPU_SET_VIDEO_RATE (CPU_CMD_MASK_CAPTURE | 0x0005)
/* Description: Set video output resolution
IN[0] - task handle
@@ -166,7 +166,7 @@
3 = horizontal/vertical, 4 = diagonal
IN[3] - strength, temporal 0 - 31, spatial 0 - 15
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_FILTER_PARAM (CPU_CMD_MASK_CAPTURE | 0x0009)
+#define CX18_CPU_SET_FILTER_PARAM (CPU_CMD_MASK_CAPTURE | 0x0009)
/* Description: This command set spatial filter type
IN[0] - Task handle.
@@ -174,7 +174,7 @@
3 = 2D H/V separable, 4 = 2D symmetric non-separable
IN[2] - chroma type: 0 - disable, 1 = 1D horizontal
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_SPATIAL_FILTER_TYPE (CPU_CMD_MASK_CAPTURE | 0x000C)
+#define CX18_CPU_SET_SPATIAL_FILTER_TYPE (CPU_CMD_MASK_CAPTURE | 0x000C)
/* Description: This command set coring levels for median filter
IN[0] - Task handle.
@@ -183,16 +183,16 @@
IN[3] - chroma_high
IN[4] - chroma_low
ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_MEDIAN_CORING (CPU_CMD_MASK_CAPTURE | 0x000E)
+#define CX18_CPU_SET_MEDIAN_CORING (CPU_CMD_MASK_CAPTURE | 0x000E)
/* Description: This command set the picture type mask for index file
IN[0] - Task handle (ignored by firmware)
- IN[1] - 0 = disable index file output
+ IN[1] - 0 = disable index file output
1 = output I picture
2 = P picture
4 = B picture
other = illegal */
-#define CX18_CPU_SET_INDEXTABLE (CPU_CMD_MASK_CAPTURE | 0x0010)
+#define CX18_CPU_SET_INDEXTABLE (CPU_CMD_MASK_CAPTURE | 0x0010)
/* Description: Set audio parameters
IN[0] - task handle. Handle of the task to start
@@ -218,7 +218,7 @@
/* Description: Set stream output type
IN[0] - task handle. Handle of the task to start
IN[1] - subType
- SET_INITIAL_SCR 1
+ SET_INITIAL_SCR 1
SET_QUALITY_MODE 2
SET_VIM_PROTECT_MODE 3
SET_PTS_CORRECTION 4
@@ -311,7 +311,7 @@
bit 0: output user data, 1 - enable
bit 1: output private stream, 1 - enable
bit 2: mux option, 0 - in GOP, 1 - in picture
- bit[7:0] private stream ID
+ bit[7:0] private stream ID
IN[5] - insertion period while mux option is in picture
ReturnCode - VBI data offset */
#define CX18_CPU_SET_SLICED_VBI_PARAM (CPU_CMD_MASK_CAPTURE | 0x0020)
@@ -344,13 +344,13 @@
#define CX18_CPU_SET_VFC_PARAM (CPU_CMD_MASK_CAPTURE | 0x0023)
/* Below is the list of commands related to the data exchange */
-#define CPU_CMD_MASK_DE (CPU_CMD_MASK | 0x040000)
+#define CPU_CMD_MASK_DE (CPU_CMD_MASK | 0x040000)
/* Description: This command provides the physical base address of the local
DDR as viewed by EPU
IN[0] - Physical offset where EPU has the local DDR mapped
ReturnCode - One of the ERR_DE_... */
-#define CPU_CMD_DE_SetBase (CPU_CMD_MASK_DE | 0x0001)
+#define CPU_CMD_DE_SetBase (CPU_CMD_MASK_DE | 0x0001)
/* Description: This command provides the offsets in the device memory where
the 2 cx18_mdl_ack blocks reside
@@ -360,7 +360,7 @@
IN[2] - Offset of the second cx18_mdl_ack from the beginning of the
local DDR.
ReturnCode - One of the ERR_DE_... */
-#define CX18_CPU_DE_SET_MDL_ACK (CPU_CMD_MASK_DE | 0x0002)
+#define CX18_CPU_DE_SET_MDL_ACK (CPU_CMD_MASK_DE | 0x0002)
/* Description: This command provides the offset to a Memory Descriptor List
IN[0] - Task handle. Handle of the task to start
@@ -369,13 +369,13 @@
IN[3] - Buffer ID
IN[4] - Total buffer length
ReturnCode - One of the ERR_DE_... */
-#define CX18_CPU_DE_SET_MDL (CPU_CMD_MASK_DE | 0x0005)
+#define CX18_CPU_DE_SET_MDL (CPU_CMD_MASK_DE | 0x0005)
/* Description: This command requests return of all current Memory
Descriptor Lists to the driver
IN[0] - Task handle. Handle of the task to start
ReturnCode - One of the ERR_DE_... */
-#define CX18_CPU_DE_RELEASE_MDL (CPU_CMD_MASK_DE | 0x0006)
+#define CX18_CPU_DE_RELEASE_MDL (CPU_CMD_MASK_DE | 0x0006)
/* Description: This command signals the cpu that the dat buffer has been
consumed and ready for re-use.
OpenPOWER on IntegriCloud