diff options
Diffstat (limited to 'drivers/leds')
| -rw-r--r-- | drivers/leds/Kconfig | 57 | ||||
| -rw-r--r-- | drivers/leds/Makefile | 6 | ||||
| -rw-r--r-- | drivers/leds/led-class.c | 5 | ||||
| -rw-r--r-- | drivers/leds/led-core.c | 5 | ||||
| -rw-r--r-- | drivers/leds/leds-aat1290.c | 576 | ||||
| -rw-r--r-- | drivers/leds/leds-bcm6328.c | 413 | ||||
| -rw-r--r-- | drivers/leds/leds-bcm6358.c | 243 | ||||
| -rw-r--r-- | drivers/leds/leds-cobalt-raq.c | 15 | ||||
| -rw-r--r-- | drivers/leds/leds-gpio.c | 12 | ||||
| -rw-r--r-- | drivers/leds/leds-ktd2692.c | 443 | ||||
| -rw-r--r-- | drivers/leds/leds-lp5523.c | 148 | ||||
| -rw-r--r-- | drivers/leds/leds-lp55xx-common.c | 2 | ||||
| -rw-r--r-- | drivers/leds/leds-max77693.c | 1097 | ||||
| -rw-r--r-- | drivers/leds/leds-tlc591xx.c | 300 | ||||
| -rw-r--r-- | drivers/leds/leds.h | 24 |
15 files changed, 3300 insertions, 46 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 4191614c4651..9ad35f72ab4c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -39,6 +39,32 @@ config LEDS_88PM860X This option enables support for on-chip LED drivers found on Marvell Semiconductor 88PM8606 PMIC. +config LEDS_AAT1290 + tristate "LED support for the AAT1290" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on GPIOLIB + depends on OF + depends on PINCTRL + help + This option enables support for the LEDs on the AAT1290. + +config LEDS_BCM6328 + tristate "LED Support for Broadcom BCM6328" + depends on LEDS_CLASS + depends on OF + help + This option enables support for LEDs connected to the BCM6328 + LED HW controller accessed via MMIO registers. + +config LEDS_BCM6358 + tristate "LED Support for Broadcom BCM6358" + depends on LEDS_CLASS + depends on OF + help + This option enables support for LEDs connected to the BCM6358 + LED HW controller accessed via MMIO registers. + config LEDS_LM3530 tristate "LCD Backlight driver for LM3530" depends on LEDS_CLASS @@ -179,7 +205,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -203,6 +229,7 @@ config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 select FW_LOADER + select FW_LOADER_USER_HELPER_FALLBACK help This option supports common operations for LP5521/5523/55231/5562/8501 devices. @@ -464,6 +491,25 @@ config LEDS_TCA6507 LED driver chips accessed via the I2C bus. Driver support brightness control and hardware-assisted blinking. +config LEDS_TLC591XX + tristate "LED driver for TLC59108 and TLC59116 controllers" + depends on LEDS_CLASS && I2C + select REGMAP_I2C + help + This option enables support for Texas Instruments TLC59108 + and TLC59116 LED controllers. + +config LEDS_MAX77693 + tristate "LED support for MAX77693 Flash" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on MFD_MAX77693 + depends on OF + help + This option enables support for the flash part of the MAX77693 + multifunction device. It has build in control for two leds in flash + and torch mode. + config LEDS_MAX8997 tristate "LED support for MAX8997 PMIC" depends on LEDS_CLASS && MFD_MAX8997 @@ -495,6 +541,15 @@ config LEDS_MENF21BMC This driver can also be built as a module. If so the module will be called leds-menf21bmc. +config LEDS_KTD2692 + tristate "LED support for KTD2692 flash LED controller" + depends on LEDS_CLASS_FLASH && GPIOLIB && OF + help + This option enables support for KTD2692 LED flash connected + through ExpressWire interface. + + Say Y to enable this driver. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index bf4609338e10..8d6a24a2f513 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -7,6 +7,9 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o +obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o +obj-$(CONFIG_LEDS_BCM6328) += leds-bcm6328.o +obj-$(CONFIG_LEDS_BCM6358) += leds-bcm6358.o obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o @@ -31,6 +34,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o +obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o @@ -52,6 +56,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o obj-$(CONFIG_LEDS_NS2) += leds-ns2.o obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o +obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o @@ -59,6 +64,7 @@ obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o +obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 7fb2a19ac649..beabfbc6f7cd 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -121,6 +121,11 @@ static void led_timer_function(unsigned long data) brightness = led_get_brightness(led_cdev); if (!brightness) { /* Time to switch the LED on. */ + if (led_cdev->delayed_set_value) { + led_cdev->blink_brightness = + led_cdev->delayed_set_value; + led_cdev->delayed_set_value = 0; + } brightness = led_cdev->blink_brightness; delay = led_cdev->blink_delay_on; } else { diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index 9886dace5ad2..549de7e24cfd 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -119,10 +119,11 @@ void led_set_brightness(struct led_classdev *led_cdev, { int ret = 0; - /* delay brightness setting if need to stop soft-blink timer */ + /* delay brightness if soft-blink is active */ if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) { led_cdev->delayed_set_value = brightness; - schedule_work(&led_cdev->set_brightness_work); + if (brightness == LED_OFF) + schedule_work(&led_cdev->set_brightness_work); return; } diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c new file mode 100644 index 000000000000..fd7c25fd29c1 --- /dev/null +++ b/drivers/leds/leds-aat1290.c @@ -0,0 +1,576 @@ +/* + * LED Flash class driver for the AAT1290 + * 1.5A Step-Up Current Regulator for Flash LEDs + * + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * Author: Jacek Anaszewski <j.anaszewski@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/led-class-flash.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <media/v4l2-flash-led-class.h> + +#define AAT1290_MOVIE_MODE_CURRENT_ADDR 17 +#define AAT1290_MAX_MM_CURR_PERCENT_0 16 +#define AAT1290_MAX_MM_CURR_PERCENT_100 1 + +#define AAT1290_FLASH_SAFETY_TIMER_ADDR 18 + +#define AAT1290_MOVIE_MODE_CONFIG_ADDR 19 +#define AAT1290_MOVIE_MODE_OFF 1 +#define AAT1290_MOVIE_MODE_ON 3 + +#define AAT1290_MM_CURRENT_RATIO_ADDR 20 +#define AAT1290_MM_TO_FL_1_92 1 + +#define AAT1290_MM_TO_FL_RATIO 1000 / 1920 +#define AAT1290_MAX_MM_CURRENT(fl_max) (fl_max * AAT1290_MM_TO_FL_RATIO) + +#define AAT1290_LATCH_TIME_MIN_US 500 +#define AAT1290_LATCH_TIME_MAX_US 1000 +#define AAT1290_EN_SET_TICK_TIME_US 1 +#define AAT1290_FLEN_OFF_DELAY_TIME_US 10 +#define AAT1290_FLASH_TM_NUM_LEVELS 16 +#define AAT1290_MM_CURRENT_SCALE_SIZE 15 + + +struct aat1290_led_config_data { + /* maximum LED current in movie mode */ + u32 max_mm_current; + /* maximum LED current in flash mode */ + u32 max_flash_current; + /* maximum flash timeout */ + u32 max_flash_tm; + /* external strobe capability */ + bool has_external_strobe; + /* max LED brightness level */ + enum led_brightness max_brightness; +}; + +struct aat1290_led { + /* platform device data */ + struct platform_device *pdev; + /* secures access to the device */ + struct mutex lock; + + /* corresponding LED Flash class device */ + struct led_classdev_flash fled_cdev; + /* V4L2 Flash device */ + struct v4l2_flash *v4l2_flash; + + /* FLEN pin */ + struct gpio_desc *gpio_fl_en; + /* EN|SET pin */ + struct gpio_desc *gpio_en_set; + /* movie mode current scale */ + int *mm_current_scale; + /* device mode */ + bool movie_mode; + + /* brightness cache */ + unsigned int torch_brightness; + /* assures led-triggers compatibility */ + struct work_struct work_brightness_set; +}; + +static struct aat1290_led *fled_cdev_to_led( + struct led_classdev_flash *fled_cdev) +{ + return container_of(fled_cdev, struct aat1290_led, fled_cdev); +} + +static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value) +{ + int i; + + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + + udelay(AAT1290_FLEN_OFF_DELAY_TIME_US); + + /* write address */ + for (i = 0; i < addr; ++i) { + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 0); + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 1); + } + + usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US); + + /* write data */ + for (i = 0; i < value; ++i) { + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 0); + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 1); + } + + usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US); +} + +static void aat1290_set_flash_safety_timer(struct aat1290_led *led, + unsigned int micro_sec) +{ + struct led_classdev_flash *fled_cdev = &led->fled_cdev; + struct led_flash_setting *flash_tm = &fled_cdev->timeout; + int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS - + (micro_sec / flash_tm->step) + 1; + + aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR, + flash_tm_reg); +} + +static void aat1290_brightness_set(struct aat1290_led *led, + enum led_brightness brightness) +{ + mutex_lock(&led->lock); + + if (brightness == 0) { + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + led->movie_mode = false; + } else { + if (!led->movie_mode) { + aat1290_as2cwire_write(led, + AAT1290_MM_CURRENT_RATIO_ADDR, + AAT1290_MM_TO_FL_1_92); + led->movie_mode = true; + } + + aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR, + AAT1290_MAX_MM_CURR_PERCENT_0 - brightness); + aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR, + AAT1290_MOVIE_MODE_ON); + } + + mutex_unlock(&led->lock); +} + +/* LED subsystem callbacks */ + +static void aat1290_brightness_set_work(struct work_struct *work) +{ + struct aat1290_led *led = + container_of(work, struct aat1290_led, work_brightness_set); + + aat1290_brightness_set(led, led->torch_brightness); +} + +static void aat1290_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + + led->torch_brightness = brightness; + schedule_work(&led->work_brightness_set); +} + +static int aat1290_led_brightness_set_sync(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + + aat1290_brightness_set(led, brightness); + + return 0; +} + +static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev, + bool state) + +{ + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + struct led_classdev *led_cdev = &fled_cdev->led_cdev; + struct led_flash_setting *timeout = &fled_cdev->timeout; + + mutex_lock(&led->lock); + + if (state) { + aat1290_set_flash_safety_timer(led, timeout->val); + gpiod_direction_output(led->gpio_fl_en, 1); + } else { + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + } + + /* + * To reenter movie mode after a flash event the part must be cycled + * off and back on to reset the movie mode and reprogrammed via the + * AS2Cwire. Therefore the brightness and movie_mode properties needs + * to be updated here to reflect the actual state. + */ + led_cdev->brightness = 0; + led->movie_mode = false; + + mutex_unlock(&led->lock); + + return 0; +} + +static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev, + u32 timeout) +{ + /* + * Don't do anything - flash timeout is cached in the led-class-flash + * core and will be applied in the strobe_set op, as writing the + * safety timer register spuriously turns the torch mode on. + */ + + return 0; +} + +static int aat1290_led_parse_dt(struct aat1290_led *led, + struct aat1290_led_config_data *cfg, + struct device_node **sub_node) +{ + struct led_classdev *led_cdev = &led->fled_cdev.led_cdev; + struct device *dev = &led->pdev->dev; + struct device_node *child_node; +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) + struct pinctrl *pinctrl; +#endif + int ret = 0; + + led->gpio_fl_en = devm_gpiod_get(dev, "flen", GPIOD_ASIS); + if (IS_ERR(led->gpio_fl_en)) { + ret = PTR_ERR(led->gpio_fl_en); + dev_err(dev, "Unable to claim gpio \"flen\".\n"); + return ret; + } + + led->gpio_en_set = devm_gpiod_get(dev, "enset", GPIOD_ASIS); + if (IS_ERR(led->gpio_en_set)) { + ret = PTR_ERR(led->gpio_en_set); + dev_err(dev, "Unable to claim gpio \"enset\".\n"); + return ret; + } + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) + pinctrl = devm_pinctrl_get_select_default(&led->pdev->dev); + if (IS_ERR(pinctrl)) { + cfg->has_external_strobe = false; + dev_info(dev, + "No support for external strobe detected.\n"); + } else { + cfg->has_external_strobe = true; + } +#endif + + child_node = of_get_next_available_child(dev->of_node, NULL); + if (!child_node) { + dev_err(dev, "No DT child node found for connected LED.\n"); + return -EINVAL; + } + + led_cdev->name = of_get_property(child_node, "label", NULL) ? : + child_node->name; + + ret = of_property_read_u32(child_node, "led-max-microamp", + &cfg->max_mm_current); + /* + * led-max-microamp will default to 1/20 of flash-max-microamp + * in case it is missing. + */ + if (ret < 0) + dev_warn(dev, + "led-max-microamp DT property missing\n"); + + ret = of_property_read_u32(child_node, "flash-max-microamp", + &cfg->max_flash_current); + if (ret < 0) { + dev_err(dev, + "flash-max-microamp DT property missing\n"); + return ret; + } + + ret = of_property_read_u32(child_node, "flash-max-timeout-us", + &cfg->max_flash_tm); + if (ret < 0) { + dev_err(dev, + "flash-max-timeout-us DT property missing\n"); + return ret; + } + + of_node_put(child_node); + + *sub_node = child_node; + + return ret; +} + +static void aat1290_led_validate_mm_current(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + int i, b = 0, e = AAT1290_MM_CURRENT_SCALE_SIZE; + + while (e - b > 1) { + i = b + (e - b) / 2; + if (cfg->max_mm_current < led->mm_current_scale[i]) + e = i; + else + b = i; + } + + cfg->max_mm_current = led->mm_current_scale[b]; + cfg->max_brightness = b + 1; +} + +int init_mm_current_scale(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + int max_mm_current_percent[] = { 20, 22, 25, 28, 32, 36, 40, 45, 50, 56, + 63, 71, 79, 89, 100 }; + int i, max_mm_current = + AAT1290_MAX_MM_CURRENT(cfg->max_flash_current); + + led->mm_current_scale = devm_kzalloc(&led->pdev->dev, + sizeof(max_mm_current_percent), + GFP_KERNEL); + if (!led->mm_current_scale) + return -ENOMEM; + + for (i = 0; i < AAT1290_MM_CURRENT_SCALE_SIZE; ++i) + led->mm_current_scale[i] = max_mm_current * + max_mm_current_percent[i] / 100; + + return 0; +} + +static int aat1290_led_get_configuration(struct aat1290_led *led, + struct aat1290_led_config_data *cfg, + struct device_node **sub_node) +{ + int ret; + + ret = aat1290_led_parse_dt(led, cfg, sub_node); + if (ret < 0) + return ret; + /* + * Init non-linear movie mode current scale basing + * on the max flash current from led configuration. + */ + ret = init_mm_current_scale(led, cfg); + if (ret < 0) + return ret; + + aat1290_led_validate_mm_current(led, cfg); + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) +#else + devm_kfree(&led->pdev->dev, led->mm_current_scale); +#endif + + return 0; +} + +static void aat1290_init_flash_timeout(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + struct led_classdev_flash *fled_cdev = &led->fled_cdev; + struct led_flash_setting *setting; + + /* Init flash timeout setting */ + setting = &fled_cdev->timeout; + setting->min = cfg->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS; + setting->max = cfg->max_flash_tm; + setting->step = setting->min; + setting->val = setting->max; +} + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) +static enum led_brightness aat1290_intensity_to_brightness( + struct v4l2_flash *v4l2_flash, + s32 intensity) +{ + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + int i; + + for (i = AAT1290_MM_CURRENT_SCALE_SIZE - 1; i >= 0; --i) + if (intensity >= led->mm_current_scale[i]) + return i + 1; + + return 1; +} + +static s32 aat1290_brightness_to_intensity(struct v4l2_flash *v4l2_flash, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + + return led->mm_current_scale[brightness - 1]; +} + +static int aat1290_led_external_strobe_set(struct v4l2_flash *v4l2_flash, + bool enable) +{ + struct aat1290_led *led = fled_cdev_to_led(v4l2_flash->fled_cdev); + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; + struct led_classdev *led_cdev = &fled_cdev->led_cdev; + struct pinctrl *pinctrl; + + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + + led->movie_mode = false; + led_cdev->brightness = 0; + + pinctrl = devm_pinctrl_get_select(&led->pdev->dev, + enable ? "isp" : "host"); + if (IS_ERR(pinctrl)) { + dev_warn(&led->pdev->dev, "Unable to switch strobe source.\n"); + return PTR_ERR(pinctrl); + } + + return 0; +} + +static void aat1290_init_v4l2_flash_config(struct aat1290_led *led, + struct aat1290_led_config_data *led_cfg, + struct v4l2_flash_config *v4l2_sd_cfg) +{ + struct led_classdev *led_cdev = &led->fled_cdev.led_cdev; + struct led_flash_setting *s; + + strlcpy(v4l2_sd_cfg->dev_name, led_cdev->name, + sizeof(v4l2_sd_cfg->dev_name)); + + s = &v4l2_sd_cfg->torch_intensity; + s->min = led->mm_current_scale[0]; + s->max = led_cfg->max_mm_current; + s->step = 1; + s->val = s->max; + + v4l2_sd_cfg->has_external_strobe = led_cfg->has_external_strobe; +} + +static const struct v4l2_flash_ops v4l2_flash_ops = { + .external_strobe_set = aat1290_led_external_strobe_set, + .intensity_to_led_brightness = aat1290_intensity_to_brightness, + .led_brightness_to_intensity = aat1290_brightness_to_intensity, +}; +#else +static inline void aat1290_init_v4l2_flash_config(struct aat1290_led *led, + struct aat1290_led_config_data *led_cfg, + struct v4l2_flash_config *v4l2_sd_cfg) +{ +} +static const struct v4l2_flash_ops v4l2_flash_ops; +#endif + +static const struct led_flash_ops flash_ops = { + .strobe_set = aat1290_led_flash_strobe_set, + .timeout_set = aat1290_led_flash_timeout_set, +}; + +static int aat1290_led_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *sub_node = NULL; + struct aat1290_led *led; + struct led_classdev *led_cdev; + struct led_classdev_flash *fled_cdev; + struct aat1290_led_config_data led_cfg = {}; + struct v4l2_flash_config v4l2_sd_cfg = {}; + int ret; + + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->pdev = pdev; + platform_set_drvdata(pdev, led); + + fled_cdev = &led->fled_cdev; + fled_cdev->ops = &flash_ops; + led_cdev = &fled_cdev->led_cdev; + + ret = aat1290_led_get_configuration(led, &led_cfg, &sub_node); + if (ret < 0) + return ret; + + mutex_init(&led->lock); + + /* Initialize LED Flash class device */ + led_cdev->brightness_set = aat1290_led_brightness_set; + led_cdev->brightness_set_sync = aat1290_led_brightness_set_sync; + led_cdev->max_brightness = led_cfg.max_brightness; + led_cdev->flags |= LED_DEV_CAP_FLASH; + INIT_WORK(&led->work_brightness_set, aat1290_brightness_set_work); + + aat1290_init_flash_timeout(led, &led_cfg); + + /* Register LED Flash class device */ + ret = led_classdev_flash_register(&pdev->dev, fled_cdev); + if (ret < 0) + goto err_flash_register; + + aat1290_init_v4l2_flash_config(led, &led_cfg, &v4l2_sd_cfg); + + /* Create V4L2 Flash subdev. */ + led->v4l2_flash = v4l2_flash_init(dev, sub_node, fled_cdev, NULL, + &v4l2_flash_ops, &v4l2_sd_cfg); + if (IS_ERR(led->v4l2_flash)) { + ret = PTR_ERR(led->v4l2_flash); + goto error_v4l2_flash_init; + } + + return 0; + +error_v4l2_flash_init: + led_classdev_flash_unregister(fled_cdev); +err_flash_register: + mutex_destroy(&led->lock); + + return ret; +} + +static int aat1290_led_remove(struct platform_device *pdev) +{ + struct aat1290_led *led = platform_get_drvdata(pdev); + + v4l2_flash_release(led->v4l2_flash); + led_classdev_flash_unregister(&led->fled_cdev); + cancel_work_sync(&led->work_brightness_set); + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct of_device_id aat1290_led_dt_match[] = { + { .compatible = "skyworks,aat1290" }, + {}, +}; + +static struct platform_driver aat1290_led_driver = { + .probe = aat1290_led_probe, + .remove = aat1290_led_remove, + .driver = { + .name = "aat1290", + .of_match_table = aat1290_led_dt_match, + }, +}; + +module_platform_driver(aat1290_led_driver); + +MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); +MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c new file mode 100644 index 000000000000..986fe1e28f84 --- /dev/null +++ b/drivers/leds/leds-bcm6328.c @@ -0,0 +1,413 @@ +/* + * Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c + * + * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright 2015 Jonas Gorski <jogo@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#define BCM6328_REG_INIT 0x00 +#define BCM6328_REG_MODE_HI 0x04 +#define BCM6328_REG_MODE_LO 0x08 +#define BCM6328_REG_HWDIS 0x0c +#define BCM6328_REG_STROBE 0x10 +#define BCM6328_REG_LNKACTSEL_HI 0x14 +#define BCM6328_REG_LNKACTSEL_LO 0x18 +#define BCM6328_REG_RBACK 0x1c +#define BCM6328_REG_SERMUX 0x20 + +#define BCM6328_LED_MAX_COUNT 24 +#define BCM6328_LED_DEF_DELAY 500 +#define BCM6328_LED_INTERVAL_MS 20 + +#define BCM6328_LED_INTV_MASK 0x3f +#define BCM6328_LED_FAST_INTV_SHIFT 6 +#define BCM6328_LED_FAST_INTV_MASK (BCM6328_LED_INTV_MASK << \ + BCM6328_LED_FAST_INTV_SHIFT) +#define BCM6328_SERIAL_LED_EN BIT(12) +#define BCM6328_SERIAL_LED_MUX BIT(13) +#define BCM6328_SERIAL_LED_CLK_NPOL BIT(14) +#define BCM6328_SERIAL_LED_DATA_PPOL BIT(15) +#define BCM6328_SERIAL_LED_SHIFT_DIR BIT(16) +#define BCM6328_LED_SHIFT_TEST BIT(30) +#define BCM6328_LED_TEST BIT(31) + +#define BCM6328_LED_MODE_MASK 3 +#define BCM6328_LED_MODE_OFF 0 +#define BCM6328_LED_MODE_FAST 1 +#define BCM6328_LED_MODE_BLINK 2 +#define BCM6328_LED_MODE_ON 3 +#define BCM6328_LED_SHIFT(X) ((X) << 1) + +/** + * struct bcm6328_led - state container for bcm6328 based LEDs + * @cdev: LED class device for this LED + * @mem: memory resource + * @lock: memory lock + * @pin: LED pin number + * @blink_leds: blinking LEDs + * @blink_delay: blinking delay + * @active_low: LED is active low + */ +struct bcm6328_led { + struct led_classdev cdev; + void __iomem *mem; + spinlock_t *lock; + unsigned long pin; + unsigned long *blink_leds; + unsigned long *blink_delay; + bool active_low; +}; + +static void bcm6328_led_write(void __iomem *reg, unsigned long data) +{ + iowrite32be(data, reg); +} + +static unsigned long bcm6328_led_read(void __iomem *reg) +{ + return ioread32be(reg); +} + +/** + * LEDMode 64 bits / 24 LEDs + * bits [31:0] -> LEDs 8-23 + * bits [47:32] -> LEDs 0-7 + * bits [63:48] -> unused + */ +static unsigned long bcm6328_pin2shift(unsigned long pin) +{ + if (pin < 8) + return pin + 16; /* LEDs 0-7 (bits 47:32) */ + else + return pin - 8; /* LEDs 8-23 (bits 31:0) */ +} + +static void bcm6328_led_mode(struct bcm6328_led *led, unsigned long value) +{ + void __iomem *mode; + unsigned long val, shift; + + shift = bcm6328_pin2shift(led->pin); + if (shift / 16) + mode = led->mem + BCM6328_REG_MODE_HI; + else + mode = led->mem + BCM6328_REG_MODE_LO; + + val = bcm6328_led_read(mode); + val &= ~(BCM6328_LED_MODE_MASK << BCM6328_LED_SHIFT(shift % 16)); + val |= (value << BCM6328_LED_SHIFT(shift % 16)); + bcm6328_led_write(mode, val); +} + +static void bcm6328_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct bcm6328_led *led = + container_of(led_cdev, struct bcm6328_led, cdev); + unsigned long flags; + + spin_lock_irqsave(led->lock, flags); + *(led->blink_leds) &= ~BIT(led->pin); + if ((led->active_low && value == LED_OFF) || + (!led->active_low && value != LED_OFF)) + bcm6328_led_mode(led, BCM6328_LED_MODE_OFF); + else + bcm6328_led_mode(led, BCM6328_LED_MODE_ON); + spin_unlock_irqrestore(led->lock, flags); +} + +static int bcm6328_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct bcm6328_led *led = + container_of(led_cdev, struct bcm6328_led, cdev); + unsigned long delay, flags; + + if (!*delay_on) + *delay_on = BCM6328_LED_DEF_DELAY; + if (!*delay_off) + *delay_off = BCM6328_LED_DEF_DELAY; + + if (*delay_on != *delay_off) { + dev_dbg(led_cdev->dev, + "fallback to soft blinking (delay_on != delay_off)\n"); + return -EINVAL; + } + + delay = *delay_on / BCM6328_LED_INTERVAL_MS; + if (delay == 0) + delay = 1; + else if (delay > BCM6328_LED_INTV_MASK) { + dev_dbg(led_cdev->dev, + "fallback to soft blinking (delay > %ums)\n", + BCM6328_LED_INTV_MASK * BCM6328_LED_INTERVAL_MS); + return -EINVAL; + } + + spin_lock_irqsave(led->lock, flags); + if (*(led->blink_leds) == 0 || + *(led->blink_leds) == BIT(led->pin) || + *(led->blink_delay) == delay) { + unsigned long val; + + *(led->blink_leds) |= BIT(led->pin); + *(led->blink_delay) = delay; + + val = bcm6328_led_read(led->mem + BCM6328_REG_INIT); + val &= ~BCM6328_LED_FAST_INTV_MASK; + val |= (delay << BCM6328_LED_FAST_INTV_SHIFT); + bcm6328_led_write(led->mem + BCM6328_REG_INIT, val); + + bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK); + + spin_unlock_irqrestore(led->lock, flags); + } else { + spin_unlock_irqrestore(led->lock, flags); + dev_dbg(led_cdev->dev, + "fallback to soft blinking (delay already set)\n"); + return -EINVAL; + } + + return 0; +} + +static int bcm6328_hwled(struct device *dev, struct device_node *nc, u32 reg, + void __iomem *mem, spinlock_t *lock) +{ + int i, cnt; + unsigned long flags, val; + + spin_lock_irqsave(lock, flags); + val = bcm6328_led_read(mem + BCM6328_REG_HWDIS); + val &= ~BIT(reg); + bcm6328_led_write(mem + BCM6328_REG_HWDIS, val); + spin_unlock_irqrestore(lock, flags); + + /* Only LEDs 0-7 can be activity/link controlled */ + if (reg >= 8) + return 0; + + cnt = of_property_count_elems_of_size(nc, "brcm,link-signal-sources", + sizeof(u32)); + for (i = 0; i < cnt; i++) { + u32 sel; + void __iomem *addr; + + if (reg < 4) + addr = mem + BCM6328_REG_LNKACTSEL_LO; + else + addr = mem + BCM6328_REG_LNKACTSEL_HI; + + of_property_read_u32_index(nc, "brcm,link-signal-sources", i, + &sel); + + if (reg / 4 != sel / 4) { + dev_warn(dev, "invalid link signal source\n"); + continue; + } + + spin_lock_irqsave(lock, flags); + val = bcm6328_led_read(addr); + val |= (BIT(reg) << (((sel % 4) * 4) + 16)); + bcm6328_led_write(addr, val); + spin_unlock_irqrestore(lock, flags); + } + + cnt = of_property_count_elems_of_size(nc, + "brcm,activity-signal-sources", + sizeof(u32)); + for (i = 0; i < cnt; i++) { + u32 sel; + void __iomem *addr; + + if (reg < 4) + addr = mem + BCM6328_REG_LNKACTSEL_LO; + else + addr = mem + BCM6328_REG_LNKACTSEL_HI; + + of_property_read_u32_index(nc, "brcm,activity-signal-sources", + i, &sel); + + if (reg / 4 != sel / 4) { + dev_warn(dev, "invalid activity signal source\n"); + continue; + } + + spin_lock_irqsave(lock, flags); + val = bcm6328_led_read(addr); + val |= (BIT(reg) << ((sel % 4) * 4)); + bcm6328_led_write(addr, val); + spin_unlock_irqrestore(lock, flags); + } + + return 0; +} + +static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg, + void __iomem *mem, spinlock_t *lock, + unsigned long *blink_leds, unsigned long *blink_delay) +{ + struct bcm6328_led *led; + unsigned long flags; + const char *state; + int rc; + + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->pin = reg; + led->mem = mem; + led->lock = lock; + led->blink_leds = blink_leds; + led->blink_delay = blink_delay; + + if (of_property_read_bool(nc, "active-low")) + led->active_low = true; + + led->cdev.name = of_get_property(nc, "label", NULL) ? : nc->name; + led->cdev.default_trigger = of_get_property(nc, + "linux,default-trigger", + NULL); + + if (!of_property_read_string(nc, "default-state", &state)) { + spin_lock_irqsave(lock, flags); + if (!strcmp(state, "on")) { + led->cdev.brightness = LED_FULL; + bcm6328_led_mode(led, BCM6328_LED_MODE_ON); + } else if (!strcmp(state, "keep")) { + void __iomem *mode; + unsigned long val, shift; + + shift = bcm6328_pin2shift(led->pin); + if (shift / 16) + mode = mem + BCM6328_REG_MODE_HI; + else + mode = mem + BCM6328_REG_MODE_LO; + + val = bcm6328_led_read(mode) >> (shift % 16); + val &= BCM6328_LED_MODE_MASK; + if (val == BCM6328_LED_MODE_ON) + led->cdev.brightness = LED_FULL; + else { + led->cdev.brightness = LED_OFF; + bcm6328_led_mode(led, BCM6328_LED_MODE_OFF); + } + } else { + led->cdev.brightness = LED_OFF; + bcm6328_led_mode(led, BCM6328_LED_MODE_OFF); + } + spin_unlock_irqrestore(lock, flags); + } + + led->cdev.brightness_set = bcm6328_led_set; + led->cdev.blink_set = bcm6328_blink_set; + + rc = led_classdev_register(dev, &led->cdev); + if (rc < 0) + return rc; + + dev_dbg(dev, "registered LED %s\n", led->cdev.name); + + return 0; +} + +static int bcm6328_leds_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct resource *mem_r; + void __iomem *mem; + spinlock_t *lock; + unsigned long val, *blink_leds, *blink_delay; + + mem_r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_r) + return -EINVAL; + + mem = devm_ioremap_resource(dev, mem_r); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL); + if (!lock) + return -ENOMEM; + + blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL); + if (!blink_leds) + return -ENOMEM; + + blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL); + if (!blink_delay) + return -ENOMEM; + + spin_lock_init(lock); + + bcm6328_led_write(mem + BCM6328_REG_HWDIS, ~0); + bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_HI, 0); + bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0); + + val = bcm6328_led_read(mem + BCM6328_REG_INIT); + val &= ~BCM6328_SERIAL_LED_EN; + if (of_property_read_bool(np, "brcm,serial-leds")) + val |= BCM6328_SERIAL_LED_EN; + bcm6328_led_write(mem + BCM6328_REG_INIT, val); + + for_each_available_child_of_node(np, child) { + int rc; + u32 reg; + + if (of_property_read_u32(child, "reg", ®)) + continue; + + if (reg >= BCM6328_LED_MAX_COUNT) { + dev_err(dev, "invalid LED (>= %d)\n", + BCM6328_LED_MAX_COUNT); + continue; + } + + if (of_property_read_bool(child, "brcm,hardware-controlled")) + rc = bcm6328_hwled(dev, child, reg, mem, lock); + else + rc = bcm6328_led(dev, child, reg, mem, lock, + blink_leds, blink_delay); + + if (rc < 0) + return rc; + } + + return 0; +} + +static const struct of_device_id bcm6328_leds_of_match[] = { + { .compatible = "brcm,bcm6328-leds", }, + { }, +}; + +static struct platform_driver bcm6328_leds_driver = { + .probe = bcm6328_leds_probe, + .driver = { + .name = "leds-bcm6328", + .of_match_table = bcm6328_leds_of_match, + }, +}; + +module_platform_driver(bcm6328_leds_driver); + +MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>"); +MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); +MODULE_DESCRIPTION("LED driver for BCM6328 controllers"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:leds-bcm6328"); diff --git a/drivers/leds/leds-bcm6358.c b/drivers/leds/leds-bcm6358.c new file mode 100644 index 000000000000..21f96930b3be --- /dev/null +++ b/drivers/leds/leds-bcm6358.c @@ -0,0 +1,243 @@ +/* + * Driver for BCM6358 memory-mapped LEDs, based on leds-syscon.c + * + * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#define BCM6358_REG_MODE 0x0 +#define BCM6358_REG_CTRL 0x4 + +#define BCM6358_SLED_CLKDIV_MASK 3 +#define BCM6358_SLED_CLKDIV_1 0 +#define BCM6358_SLED_CLKDIV_2 1 +#define BCM6358_SLED_CLKDIV_4 2 +#define BCM6358_SLED_CLKDIV_8 3 + +#define BCM6358_SLED_POLARITY BIT(2) +#define BCM6358_SLED_BUSY BIT(3) + +#define BCM6358_SLED_MAX_COUNT 32 +#define BCM6358_SLED_WAIT 100 + +/** + * struct bcm6358_led - state container for bcm6358 based LEDs + * @cdev: LED class device for this LED + * @mem: memory resource + * @lock: memory lock + * @pin: LED pin number + * @active_low: LED is active low + */ +struct bcm6358_led { + struct led_classdev cdev; + void __iomem *mem; + spinlock_t *lock; + unsigned long pin; + bool active_low; +}; + +static void bcm6358_led_write(void __iomem *reg, unsigned long data) +{ + iowrite32be(data, reg); +} + +static unsigned long bcm6358_led_read(void __iomem *reg) +{ + return ioread32be(reg); +} + +static unsigned long bcm6358_led_busy(void __iomem *mem) +{ + unsigned long val; + + while ((val = bcm6358_led_read(mem + BCM6358_REG_CTRL)) & + BCM6358_SLED_BUSY) + udelay(BCM6358_SLED_WAIT); + + return val; +} + +static void bcm6358_led_mode(struct bcm6358_led *led, unsigned long value) +{ + unsigned long val; + + bcm6358_led_busy(led->mem); + + val = bcm6358_led_read(led->mem + BCM6358_REG_MODE); + if ((led->active_low && value == LED_OFF) || + (!led->active_low && value != LED_OFF)) + val |= BIT(led->pin); + else + val &= ~(BIT(led->pin)); + bcm6358_led_write(led->mem + BCM6358_REG_MODE, val); +} + +static void bcm6358_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct bcm6358_led *led = + container_of(led_cdev, struct bcm6358_led, cdev); + unsigned long flags; + + spin_lock_irqsave(led->lock, flags); + bcm6358_led_mode(led, value); + spin_unlock_irqrestore(led->lock, flags); +} + +static int bcm6358_led(struct device *dev, struct device_node *nc, u32 reg, + void __iomem *mem, spinlock_t *lock) +{ + struct bcm6358_led *led; + unsigned long flags; + const char *state; + int rc; + + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->pin = reg; + led->mem = mem; + led->lock = lock; + + if (of_property_read_bool(nc, "active-low")) + led->active_low = true; + + led->cdev.name = of_get_property(nc, "label", NULL) ? : nc->name; + led->cdev.default_trigger = of_get_property(nc, + "linux,default-trigger", + NULL); + + spin_lock_irqsave(lock, flags); + if (!of_property_read_string(nc, "default-state", &state)) { + if (!strcmp(state, "on")) { + led->cdev.brightness = LED_FULL; + } else if (!strcmp(state, "keep")) { + unsigned long val; + + bcm6358_led_busy(led->mem); + + val = bcm6358_led_read(led->mem + BCM6358_REG_MODE); + val &= BIT(led->pin); + if ((led->active_low && !val) || + (!led->active_low && val)) + led->cdev.brightness = LED_FULL; + else + led->cdev.brightness = LED_OFF; + } else { + led->cdev.brightness = LED_OFF; + } + } else { + led->cdev.brightness = LED_OFF; + } + bcm6358_led_mode(led, led->cdev.brightness); + spin_unlock_irqrestore(lock, flags); + + led->cdev.brightness_set = bcm6358_led_set; + + rc = led_classdev_register(dev, &led->cdev); + if (rc < 0) + return rc; + + dev_dbg(dev, "registered LED %s\n", led->cdev.name); + + return 0; +} + +static int bcm6358_leds_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct resource *mem_r; + void __iomem *mem; + spinlock_t *lock; /* memory lock */ + unsigned long val; + u32 clk_div; + + mem_r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_r) + return -EINVAL; + + mem = devm_ioremap_resource(dev, mem_r); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL); + if (!lock) + return -ENOMEM; + + spin_lock_init(lock); + + val = bcm6358_led_busy(mem); + val &= ~(BCM6358_SLED_POLARITY | BCM6358_SLED_CLKDIV_MASK); + if (of_property_read_bool(np, "brcm,clk-dat-low")) + val |= BCM6358_SLED_POLARITY; + of_property_read_u32(np, "brcm,clk-div", &clk_div); + switch (clk_div) { + case 8: + val |= BCM6358_SLED_CLKDIV_8; + break; + case 4: + val |= BCM6358_SLED_CLKDIV_4; + break; + case 2: + val |= BCM6358_SLED_CLKDIV_2; + break; + default: + val |= BCM6358_SLED_CLKDIV_1; + break; + } + bcm6358_led_write(mem + BCM6358_REG_CTRL, val); + + for_each_available_child_of_node(np, child) { + int rc; + u32 reg; + + if (of_property_read_u32(child, "reg", ®)) + continue; + + if (reg >= BCM6358_SLED_MAX_COUNT) { + dev_err(dev, "invalid LED (%u >= %d)\n", reg, + BCM6358_SLED_MAX_COUNT); + continue; + } + + rc = bcm6358_led(dev, child, reg, mem, lock); + if (rc < 0) + return rc; + } + + return 0; +} + +static const struct of_device_id bcm6358_leds_of_match[] = { + { .compatible = "brcm,bcm6358-leds", }, + { }, +}; + +static struct platform_driver bcm6358_leds_driver = { + .probe = bcm6358_leds_probe, + .driver = { + .name = "leds-bcm6358", + .of_match_table = bcm6358_leds_of_match, + }, +}; + +module_platform_driver(bcm6358_leds_driver); + +MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>"); +MODULE_DESCRIPTION("LED driver for BCM6358 controllers"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:leds-bcm6358"); diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index 06dbe18a2065..b316df4a8c1e 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -108,20 +108,8 @@ err_null: return retval; } -static int cobalt_raq_led_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&raq_power_off_led); - led_classdev_unregister(&raq_web_led); - - if (led_port) - led_port = NULL; - - return 0; -} - static struct platform_driver cobalt_raq_led_driver = { .probe = cobalt_raq_led_probe, - .remove = cobalt_raq_led_remove, .driver = { .name = "cobalt-raq-leds", }, @@ -131,5 +119,4 @@ static int __init cobalt_raq_led_init(void) { return platform_driver_register(&cobalt_raq_led_driver); } - -module_init(cobalt_raq_led_init); +device_initcall(cobalt_raq_led_init); diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index d2d54d62afee..af1876a3a77c 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/leds.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/slab.h> @@ -198,8 +199,10 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev) } else { if (IS_ENABLED(CONFIG_OF) && !led.name && np) led.name = np->name; - if (!led.name) - return ERR_PTR(-EINVAL); + if (!led.name) { + ret = -EINVAL; + goto err; + } } fwnode_property_read_string(child, "linux,default-trigger", &led.default_trigger); @@ -217,18 +220,19 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev) if (fwnode_property_present(child, "retain-state-suspended")) led.retain_state_suspended = 1; - ret = create_gpio_led(&led, &priv->leds[priv->num_leds++], + ret = create_gpio_led(&led, &priv->leds[priv->num_leds], dev, NULL); if (ret < 0) { fwnode_handle_put(child); goto err; } + priv->num_leds++; } return priv; err: - for (count = priv->num_leds - 2; count >= 0; count--) + for (count = priv->num_leds - 1; count >= 0; count--) delete_gpio_led(&priv->leds[count]); return ERR_PTR(ret); } diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c new file mode 100644 index 000000000000..2ae8c4d17ff8 --- /dev/null +++ b/drivers/leds/leds-ktd2692.c @@ -0,0 +1,443 @@ +/* + * LED driver : leds-ktd2692.c + * + * Copyright (C) 2015 Samsung Electronics + * Ingi Kim <ingi2.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/led-class-flash.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/workqueue.h> + +/* Value related the movie mode */ +#define KTD2692_MOVIE_MODE_CURRENT_LEVELS 16 +#define KTD2692_MM_TO_FL_RATIO(x) ((x) / 3) +#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE 8 + +/* Value related the flash mode */ +#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8 +#define KTD2692_FLASH_MODE_TIMEOUT_DISABLE 0 +#define KTD2692_FLASH_MODE_CURR_PERCENT(x) (((x) * 16) / 100) + +/* Macro for getting offset of flash timeout */ +#define GET_TIMEOUT_OFFSET(timeout, step) ((timeout) / (step)) + +/* Base register address */ +#define KTD2692_REG_LVP_BASE 0x00 +#define KTD2692_REG_FLASH_TIMEOUT_BASE 0x20 +#define KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE 0x40 +#define KTD2692_REG_MOVIE_CURRENT_BASE 0x60 +#define KTD2692_REG_FLASH_CURRENT_BASE 0x80 +#define KTD2692_REG_MODE_BASE 0xA0 + +/* Set bit coding time for expresswire interface */ +#define KTD2692_TIME_RESET_US 700 +#define KTD2692_TIME_DATA_START_TIME_US 10 +#define KTD2692_TIME_HIGH_END_OF_DATA_US 350 +#define KTD2692_TIME_LOW_END_OF_DATA_US 10 +#define KTD2692_TIME_SHORT_BITSET_US 4 +#define KTD2692_TIME_LONG_BITSET_US 12 + +/* KTD2692 default length of name */ +#define KTD2692_NAME_LENGTH 20 + +enum ktd2692_bitset { + KTD2692_LOW = 0, + KTD2692_HIGH, +}; + +/* Movie / Flash Mode Control */ +enum ktd2692_led_mode { + KTD2692_MODE_DISABLE = 0, /* default */ + KTD2692_MODE_MOVIE, + KTD2692_MODE_FLASH, +}; + +struct ktd2692_led_config_data { + /* maximum LED current in movie mode */ + u32 movie_max_microamp; + /* maximum LED current in flash mode */ + u32 flash_max_microamp; + /* maximum flash timeout */ + u32 flash_max_timeout; + /* max LED brightness level */ + enum led_brightness max_brightness; +}; + +struct ktd2692_context { + /* Related LED Flash class device */ + struct led_classdev_flash fled_cdev; + + /* secures access to the device */ + struct mutex lock; + struct regulator *regulator; + struct work_struct work_brightness_set; + + struct gpio_desc *aux_gpio; + struct gpio_desc *ctrl_gpio; + + enum ktd2692_led_mode mode; + enum led_brightness torch_brightness; +}; + +static struct ktd2692_context *fled_cdev_to_led( + struct led_classdev_flash *fled_cdev) +{ + return container_of(fled_cdev, struct ktd2692_context, fled_cdev); +} + +static void ktd2692_expresswire_start(struct ktd2692_context *led) +{ + gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); + udelay(KTD2692_TIME_DATA_START_TIME_US); +} + +static void ktd2692_expresswire_reset(struct ktd2692_context *led) +{ + gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); + udelay(KTD2692_TIME_RESET_US); +} + +static void ktd2692_expresswire_end(struct ktd2692_context *led) +{ + gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); + udelay(KTD2692_TIME_LOW_END_OF_DATA_US); + gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); + udelay(KTD2692_TIME_HIGH_END_OF_DATA_US); +} + +static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit) +{ + /* + * The Low Bit(0) and High Bit(1) is based on a time detection + * algorithm between time low and time high + * Time_(L_LB) : Low time of the Low Bit(0) + * Time_(H_LB) : High time of the LOW Bit(0) + * Time_(L_HB) : Low time of the High Bit(1) + * Time_(H_HB) : High time of the High Bit(1) + * + * It can be simplified to: + * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB) + * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB) + * HIGH ___ ____ _.. _________ ___ + * |_________| |_.. |____| |__| + * LOW <L_LB> <H_LB> <L_HB> <H_HB> + * [ Low Bit (0) ] [ High Bit(1) ] + */ + if (bit) { + gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); + udelay(KTD2692_TIME_SHORT_BITSET_US); + gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); + udelay(KTD2692_TIME_LONG_BITSET_US); + } else { + gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); + udelay(KTD2692_TIME_LONG_BITSET_US); + gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); + udelay(KTD2692_TIME_SHORT_BITSET_US); + } +} + +static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value) +{ + int i; + + ktd2692_expresswire_start(led); + for (i = 7; i >= 0; i--) + ktd2692_expresswire_set_bit(led, value & BIT(i)); + ktd2692_expresswire_end(led); +} + +static void ktd2692_brightness_set(struct ktd2692_context *led, + enum led_brightness brightness) +{ + mutex_lock(&led->lock); + + if (brightness == LED_OFF) { + led->mode = KTD2692_MODE_DISABLE; + gpiod_direction_output(led->aux_gpio, KTD2692_LOW); + } else { + ktd2692_expresswire_write(led, brightness | + KTD2692_REG_MOVIE_CURRENT_BASE); + led->mode = KTD2692_MODE_MOVIE; + } + + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE); + mutex_unlock(&led->lock); +} + +static void ktd2692_brightness_set_work(struct work_struct *work) +{ + struct ktd2692_context *led = + container_of(work, struct ktd2692_context, work_brightness_set); + + ktd2692_brightness_set(led, led->torch_brightness); +} + +static void ktd2692_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev); + + led->torch_brightness = brightness; + schedule_work(&led->work_brightness_set); +} + +static int ktd2692_led_brightness_set_sync(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev); + + ktd2692_brightness_set(led, brightness); + + return 0; +} + +static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev, + bool state) +{ + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev); + struct led_flash_setting *timeout = &fled_cdev->timeout; + u32 flash_tm_reg; + + mutex_lock(&led->lock); + + if (state) { + flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step); + ktd2692_expresswire_write(led, flash_tm_reg + | KTD2692_REG_FLASH_TIMEOUT_BASE); + + led->mode = KTD2692_MODE_FLASH; + gpiod_direction_output(led->aux_gpio, KTD2692_HIGH); + } else { + led->mode = KTD2692_MODE_DISABLE; + gpiod_direction_output(led->aux_gpio, KTD2692_LOW); + } + + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE); + + fled_cdev->led_cdev.brightness = LED_OFF; + led->mode = KTD2692_MODE_DISABLE; + + mutex_unlock(&led->lock); + + return 0; +} + +static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev, + u32 timeout) +{ + return 0; +} + +static void ktd2692_init_movie_current_max(struct ktd2692_led_config_data *cfg) +{ + u32 offset, step; + u32 movie_current_microamp; + + offset = KTD2692_MOVIE_MODE_CURRENT_LEVELS; + step = KTD2692_MM_TO_FL_RATIO(cfg->flash_max_microamp) + / KTD2692_MOVIE_MODE_CURRENT_LEVELS; + + do { + movie_current_microamp = step * offset; + offset--; + } while ((movie_current_microamp > cfg->movie_max_microamp) && + (offset > 0)); + + cfg->max_brightness = offset; +} + +static void ktd2692_init_flash_timeout(struct led_classdev_flash *fled_cdev, + struct ktd2692_led_config_data *cfg) +{ + struct led_flash_setting *setting; + + setting = &fled_cdev->timeout; + setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE; + setting->max = cfg->flash_max_timeout; + setting->step = cfg->flash_max_timeout + / (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1); + setting->val = cfg->flash_max_timeout; +} + +static void ktd2692_setup(struct ktd2692_context *led) +{ + led->mode = KTD2692_MODE_DISABLE; + ktd2692_expresswire_reset(led); + gpiod_direction_output(led->aux_gpio, KTD2692_LOW); + + ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1) + | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE); + ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45) + | KTD2692_REG_FLASH_CURRENT_BASE); +} + +static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev, + struct ktd2692_led_config_data *cfg) +{ + struct device_node *np = dev->of_node; + struct device_node *child_node; + int ret; + + if (!dev->of_node) + return -ENXIO; + + led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS); + if (IS_ERR(led->ctrl_gpio)) { + ret = PTR_ERR(led->ctrl_gpio); + dev_err(dev, "cannot get ctrl-gpios %d\n", ret); + return ret; + } + + led->aux_gpio = devm_gpiod_get(dev, "aux", GPIOD_ASIS); + if (IS_ERR(led->aux_gpio)) { + ret = PTR_ERR(led->aux_gpio); + dev_err(dev, "cannot get aux-gpios %d\n", ret); + return ret; + } + + led->regulator = devm_regulator_get(dev, "vin"); + if (IS_ERR(led->regulator)) + led->regulator = NULL; + + if (led->regulator) { + ret = regulator_enable(led->regulator); + if (ret) + dev_err(dev, "Failed to enable supply: %d\n", ret); + } + + child_node = of_get_next_available_child(np, NULL); + if (!child_node) { + dev_err(dev, "No DT child node found for connected LED.\n"); + return -EINVAL; + } + + led->fled_cdev.led_cdev.name = + of_get_property(child_node, "label", NULL) ? : child_node->name; + + ret = of_property_read_u32(child_node, "led-max-microamp", + &cfg->movie_max_microamp); + if (ret) { + dev_err(dev, "failed to parse led-max-microamp\n"); + return ret; + } + + ret = of_property_read_u32(child_node, "flash-max-microamp", + &cfg->flash_max_microamp); + if (ret) { + dev_err(dev, "failed to parse flash-max-microamp\n"); + return ret; + } + + ret = of_property_read_u32(child_node, "flash-max-timeout-us", + &cfg->flash_max_timeout); + if (ret) + dev_err(dev, "failed to parse flash-max-timeout-us\n"); + + of_node_put(child_node); + return ret; +} + +static const struct led_flash_ops flash_ops = { + .strobe_set = ktd2692_led_flash_strobe_set, + .timeout_set = ktd2692_led_flash_timeout_set, +}; + +static int ktd2692_probe(struct platform_device *pdev) +{ + struct ktd2692_context *led; + struct led_classdev *led_cdev; + struct led_classdev_flash *fled_cdev; + struct ktd2692_led_config_data led_cfg; + int ret; + + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + fled_cdev = &led->fled_cdev; + led_cdev = &fled_cdev->led_cdev; + + ret = ktd2692_parse_dt(led, &pdev->dev, &led_cfg); + if (ret) + return ret; + + ktd2692_init_flash_timeout(fled_cdev, &led_cfg); + ktd2692_init_movie_current_max(&led_cfg); + + fled_cdev->ops = &flash_ops; + + led_cdev->max_brightness = led_cfg.max_brightness; + led_cdev->brightness_set = ktd2692_led_brightness_set; + led_cdev->brightness_set_sync = ktd2692_led_brightness_set_sync; + led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH; + + mutex_init(&led->lock); + INIT_WORK(&led->work_brightness_set, ktd2692_brightness_set_work); + + platform_set_drvdata(pdev, led); + + ret = led_classdev_flash_register(&pdev->dev, fled_cdev); + if (ret) { + dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name); + mutex_destroy(&led->lock); + return ret; + } + + ktd2692_setup(led); + + return 0; +} + +static int ktd2692_remove(struct platform_device *pdev) +{ + struct ktd2692_context *led = platform_get_drvdata(pdev); + int ret; + + led_classdev_flash_unregister(&led->fled_cdev); + cancel_work_sync(&led->work_brightness_set); + + if (led->regulator) { + ret = regulator_disable(led->regulator); + if (ret) + dev_err(&pdev->dev, + "Failed to disable supply: %d\n", ret); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct of_device_id ktd2692_match[] = { + { .compatible = "kinetic,ktd2692", }, + { /* sentinel */ }, +}; + +static struct platform_driver ktd2692_driver = { + .driver = { + .name = "ktd2692", + .of_match_table = ktd2692_match, + }, + .probe = ktd2692_probe, + .remove = ktd2692_remove, +}; + +module_platform_driver(ktd2692_driver); + +MODULE_AUTHOR("Ingi Kim <ingi2.kim@samsung.com>"); +MODULE_DESCRIPTION("Kinetic KTD2692 LED driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 9e1716f8098c..584dbbcec659 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -50,6 +50,7 @@ #define LP5523_REG_OP_MODE 0x01 #define LP5523_REG_ENABLE_LEDS_MSB 0x04 #define LP5523_REG_ENABLE_LEDS_LSB 0x05 +#define LP5523_REG_LED_CTRL_BASE 0x06 #define LP5523_REG_LED_PWM_BASE 0x16 #define LP5523_REG_LED_CURRENT_BASE 0x26 #define LP5523_REG_CONFIG 0x36 @@ -57,6 +58,7 @@ #define LP5523_REG_RESET 0x3D #define LP5523_REG_LED_TEST_CTRL 0x41 #define LP5523_REG_LED_TEST_ADC 0x42 +#define LP5523_REG_MASTER_FADER_BASE 0x48 #define LP5523_REG_CH1_PROG_START 0x4C #define LP5523_REG_CH2_PROG_START 0x4D #define LP5523_REG_CH3_PROG_START 0x4E @@ -78,6 +80,9 @@ #define LP5523_EXT_CLK_USED 0x08 #define LP5523_ENG_STATUS_MASK 0x07 +#define LP5523_FADER_MAPPING_MASK 0xC0 +#define LP5523_FADER_MAPPING_SHIFT 6 + /* Memory Page Selection */ #define LP5523_PAGE_ENG1 0 #define LP5523_PAGE_ENG2 1 @@ -666,6 +671,137 @@ release_lock: return pos; } +#define show_fader(nr) \ +static ssize_t show_master_fader##nr(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_master_fader(dev, attr, buf, nr); \ +} + +#define store_fader(nr) \ +static ssize_t store_master_fader##nr(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_master_fader(dev, attr, buf, len, nr); \ +} + +static ssize_t show_master_fader(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + int ret; + u8 val; + + mutex_lock(&chip->lock); + ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val); + mutex_unlock(&chip->lock); + + if (ret == 0) + ret = sprintf(buf, "%u\n", val); + + return ret; +} +show_fader(1) +show_fader(2) +show_fader(3) + +static ssize_t store_master_fader(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + int ret; + unsigned long val; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + if (val > 0xff) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, + (u8)val); + mutex_unlock(&chip->lock); + + if (ret == 0) + ret = len; + + return ret; +} +store_fader(1) +store_fader(2) +store_fader(3) + +static ssize_t show_master_fader_leds(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + int i, ret, pos = 0; + u8 val; + + mutex_lock(&chip->lock); + + for (i = 0; i < LP5523_MAX_LEDS; i++) { + ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val); + if (ret) + goto leave; + + val = (val & LP5523_FADER_MAPPING_MASK) + >> LP5523_FADER_MAPPING_SHIFT; + if (val > 3) { + ret = -EINVAL; + goto leave; + } + buf[pos++] = val + '0'; + } + buf[pos++] = '\n'; + ret = pos; +leave: + mutex_unlock(&chip->lock); + return ret; +} + +static ssize_t store_master_fader_leds(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + int i, n, ret; + u8 val; + + n = min_t(int, len, LP5523_MAX_LEDS); + + mutex_lock(&chip->lock); + + for (i = 0; i < n; i++) { + if (buf[i] >= '0' && buf[i] <= '3') { + val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT; + ret = lp55xx_update_bits(chip, + LP5523_REG_LED_CTRL_BASE + i, + LP5523_FADER_MAPPING_MASK, + val); + if (ret) + goto leave; + } else { + ret = -EINVAL; + goto leave; + } + } + ret = len; +leave: + mutex_unlock(&chip->lock); + return ret; +} + static void lp5523_led_brightness_work(struct work_struct *work) { struct lp55xx_led *led = container_of(work, struct lp55xx_led, @@ -688,6 +824,14 @@ static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load); static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load); static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load); static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest); +static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1, + store_master_fader1); +static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2, + store_master_fader2); +static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3, + store_master_fader3); +static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds, + store_master_fader_leds); static struct attribute *lp5523_attributes[] = { &dev_attr_engine1_mode.attr, @@ -700,6 +844,10 @@ static struct attribute *lp5523_attributes[] = { &dev_attr_engine2_leds.attr, &dev_attr_engine3_leds.attr, &dev_attr_selftest.attr, + &dev_attr_master_fader1.attr, + &dev_attr_master_fader2.attr, + &dev_attr_master_fader3.attr, + &dev_attr_master_fader_leds.attr, NULL, }; diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index 77c26bc32eed..96d51e9879c9 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -223,7 +223,7 @@ static int lp55xx_request_firmware(struct lp55xx_chip *chip) const char *name = chip->cl->name; struct device *dev = &chip->cl->dev; - return request_firmware_nowait(THIS_MODULE, true, name, dev, + return request_firmware_nowait(THIS_MODULE, false, name, dev, GFP_KERNEL, chip, lp55xx_firmware_loaded); } diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c new file mode 100644 index 000000000000..b8b0eec7b540 --- /dev/null +++ b/drivers/leds/leds-max77693.c @@ -0,0 +1,1097 @@ +/* + * LED Flash class driver for the flash cell of max77693 mfd. + * + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * + * Authors: Jacek Anaszewski <j.anaszewski@samsung.com> + * Andrzej Hajda <a.hajda@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/led-class-flash.h> +#include <linux/mfd/max77693.h> +#include <linux/mfd/max77693-private.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <media/v4l2-flash-led-class.h> + +#define MODE_OFF 0 +#define MODE_FLASH(a) (1 << (a)) +#define MODE_TORCH(a) (1 << (2 + (a))) +#define MODE_FLASH_EXTERNAL(a) (1 << (4 + (a))) + +#define MODE_FLASH_MASK (MODE_FLASH(FLED1) | MODE_FLASH(FLED2) | \ + MODE_FLASH_EXTERNAL(FLED1) | \ + MODE_FLASH_EXTERNAL(FLED2)) +#define MODE_TORCH_MASK (MODE_TORCH(FLED1) | MODE_TORCH(FLED2)) + +#define FLED1_IOUT (1 << 0) +#define FLED2_IOUT (1 << 1) + +enum max77693_fled { + FLED1, + FLED2, +}; + +enum max77693_led_mode { + FLASH, + TORCH, +}; + +struct max77693_led_config_data { + const char *label[2]; + u32 iout_torch_max[2]; + u32 iout_flash_max[2]; + u32 flash_timeout_max[2]; + u32 num_leds; + u32 boost_mode; + u32 boost_vout; + u32 low_vsys; +}; + +struct max77693_sub_led { + /* corresponding FLED output identifier */ + int fled_id; + /* corresponding LED Flash class device */ + struct led_classdev_flash fled_cdev; + /* assures led-triggers compatibility */ + struct work_struct work_brightness_set; + /* V4L2 Flash device */ + struct v4l2_flash *v4l2_flash; + + /* brightness cache */ + unsigned int torch_brightness; + /* flash timeout cache */ + unsigned int flash_timeout; + /* flash faults that may have occurred */ + u32 flash_faults; +}; + +struct max77693_led_device { + /* parent mfd regmap */ + struct regmap *regmap; + /* platform device data */ + struct platform_device *pdev; + /* secures access to the device */ + struct mutex lock; + + /* sub led data */ + struct max77693_sub_led sub_leds[2]; + + /* maximum torch current values for FLED outputs */ + u32 iout_torch_max[2]; + /* maximum flash current values for FLED outputs */ + u32 iout_flash_max[2]; + + /* current flash timeout cache */ + unsigned int current_flash_timeout; + /* ITORCH register cache */ + u8 torch_iout_reg; + /* mode of fled outputs */ + unsigned int mode_flags; + /* recently strobed fled */ + int strobing_sub_led_id; + /* bitmask of FLED outputs use state (bit 0. - FLED1, bit 1. - FLED2) */ + u8 fled_mask; + /* FLED modes that can be set */ + u8 allowed_modes; + + /* arrangement of current outputs */ + bool iout_joint; +}; + +static u8 max77693_led_iout_to_reg(u32 ua) +{ + if (ua < FLASH_IOUT_MIN) + ua = FLASH_IOUT_MIN; + return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP; +} + +static u8 max77693_flash_timeout_to_reg(u32 us) +{ + return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP; +} + +static inline struct max77693_sub_led *flcdev_to_sub_led( + struct led_classdev_flash *fled_cdev) +{ + return container_of(fled_cdev, struct max77693_sub_led, fled_cdev); +} + +static inline struct max77693_led_device *sub_led_to_led( + struct max77693_sub_led *sub_led) +{ + return container_of(sub_led, struct max77693_led_device, + sub_leds[sub_led->fled_id]); +} + +static inline u8 max77693_led_vsys_to_reg(u32 mv) +{ + return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2; +} + +static inline u8 max77693_led_vout_to_reg(u32 mv) +{ + return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN; +} + +static inline bool max77693_fled_used(struct max77693_led_device *led, + int fled_id) +{ + u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT; + + return led->fled_mask & fled_bit; +} + +static int max77693_set_mode_reg(struct max77693_led_device *led, u8 mode) +{ + struct regmap *rmap = led->regmap; + int ret, v = 0, i; + + for (i = FLED1; i <= FLED2; ++i) { + if (mode & MODE_TORCH(i)) + v |= FLASH_EN_ON << TORCH_EN_SHIFT(i); + + if (mode & MODE_FLASH(i)) { + v |= FLASH_EN_ON << FLASH_EN_SHIFT(i); + } else if (mode & MODE_FLASH_EXTERNAL(i)) { + v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(i); + /* + * Enable hw triggering also for torch mode, as some + * camera sensors use torch led to fathom ambient light + * conditions before strobing the flash. + */ + v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(i); + } + } + + /* Reset the register only prior setting flash modes */ + if (mode & ~(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))) { + ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0); + if (ret < 0) + return ret; + } + + return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v); +} + +static int max77693_add_mode(struct max77693_led_device *led, u8 mode) +{ + u8 new_mode_flags; + int i, ret; + + if (led->iout_joint) + /* Span the mode on FLED2 for joint iouts case */ + mode |= (mode << 1); + + /* + * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins in the device. + * Corresponding register bit fields interfere with SW triggered modes, + * thus clear them to ensure proper device configuration. + */ + for (i = FLED1; i <= FLED2; ++i) + if (mode & MODE_FLASH_EXTERNAL(i)) + led->mode_flags &= (~MODE_TORCH(i) & ~MODE_FLASH(i)); + + new_mode_flags = mode | led->mode_flags; + new_mode_flags &= led->allowed_modes; + + if (new_mode_flags ^ led->mode_flags) + led->mode_flags = new_mode_flags; + else + return 0; + + ret = max77693_set_mode_reg(led, led->mode_flags); + if (ret < 0) + return ret; + + /* + * Clear flash mode flag after setting the mode to avoid spurious flash + * strobing on each subsequent torch mode setting. + */ + if (mode & MODE_FLASH_MASK) + led->mode_flags &= ~mode; + + return ret; +} + +static int max77693_clear_mode(struct max77693_led_device *led, + u8 mode) +{ + if (led->iout_joint) + /* Clear mode also on FLED2 for joint iouts case */ + mode |= (mode << 1); + + led->mode_flags &= ~mode; + + return max77693_set_mode_reg(led, led->mode_flags); +} + +static void max77693_add_allowed_modes(struct max77693_led_device *led, + int fled_id, enum max77693_led_mode mode) +{ + if (mode == FLASH) + led->allowed_modes |= (MODE_FLASH(fled_id) | + MODE_FLASH_EXTERNAL(fled_id)); + else + led->allowed_modes |= MODE_TORCH(fled_id); +} + +static void max77693_distribute_currents(struct max77693_led_device *led, + int fled_id, enum max77693_led_mode mode, + u32 micro_amp, u32 iout_max[2], u32 iout[2]) +{ + if (!led->iout_joint) { + iout[fled_id] = micro_amp; + max77693_add_allowed_modes(led, fled_id, mode); + return; + } + + iout[FLED1] = min(micro_amp, iout_max[FLED1]); + iout[FLED2] = micro_amp - iout[FLED1]; + + if (mode == FLASH) + led->allowed_modes &= ~MODE_FLASH_MASK; + else + led->allowed_modes &= ~MODE_TORCH_MASK; + + max77693_add_allowed_modes(led, FLED1, mode); + + if (iout[FLED2]) + max77693_add_allowed_modes(led, FLED2, mode); +} + +static int max77693_set_torch_current(struct max77693_led_device *led, + int fled_id, u32 micro_amp) +{ + struct regmap *rmap = led->regmap; + u8 iout1_reg = 0, iout2_reg = 0; + u32 iout[2]; + + max77693_distribute_currents(led, fled_id, TORCH, micro_amp, + led->iout_torch_max, iout); + + if (fled_id == FLED1 || led->iout_joint) { + iout1_reg = max77693_led_iout_to_reg(iout[FLED1]); + led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT2_SHIFT); + } + if (fled_id == FLED2 || led->iout_joint) { + iout2_reg = max77693_led_iout_to_reg(iout[FLED2]); + led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT1_SHIFT); + } + + led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) | + (iout2_reg << TORCH_IOUT2_SHIFT)); + + return regmap_write(rmap, MAX77693_LED_REG_ITORCH, + led->torch_iout_reg); +} + +static int max77693_set_flash_current(struct max77693_led_device *led, + int fled_id, + u32 micro_amp) +{ + struct regmap *rmap = led->regmap; + u8 iout1_reg, iout2_reg; + u32 iout[2]; + int ret = -EINVAL; + + max77693_distribute_currents(led, fled_id, FLASH, micro_amp, + led->iout_flash_max, iout); + + if (fled_id == FLED1 || led->iout_joint) { + iout1_reg = max77693_led_iout_to_reg(iout[FLED1]); + ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1, + iout1_reg); + if (ret < 0) + return ret; + } + if (fled_id == FLED2 || led->iout_joint) { + iout2_reg = max77693_led_iout_to_reg(iout[FLED2]); + ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2, + iout2_reg); + } + + return ret; +} + +static int max77693_set_timeout(struct max77693_led_device *led, u32 microsec) +{ + struct regmap *rmap = led->regmap; + u8 v; + int ret; + + v = max77693_flash_timeout_to_reg(microsec) | FLASH_TMR_LEVEL; + + ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v); + if (ret < 0) + return ret; + + led->current_flash_timeout = microsec; + + return 0; +} + +static int max77693_get_strobe_status(struct max77693_led_device *led, + bool *state) +{ + struct regmap *rmap = led->regmap; + unsigned int v; + int ret; + + ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v); + if (ret < 0) + return ret; + + *state = v & FLASH_STATUS_FLASH_ON; + + return ret; +} + +static int max77693_get_flash_faults(struct max77693_sub_led *sub_led) +{ + struct max77693_led_device *led = sub_led_to_led(sub_led); + struct regmap *rmap = led->regmap; + unsigned int v; + u8 fault_open_mask, fault_short_mask; + int ret; + + sub_led->flash_faults = 0; + + if (led->iout_joint) { + fault_open_mask = FLASH_INT_FLED1_OPEN | FLASH_INT_FLED2_OPEN; + fault_short_mask = FLASH_INT_FLED1_SHORT | + FLASH_INT_FLED2_SHORT; + } else { + fault_open_mask = (sub_led->fled_id == FLED1) ? + FLASH_INT_FLED1_OPEN : + FLASH_INT_FLED2_OPEN; + fault_short_mask = (sub_led->fled_id == FLED1) ? + FLASH_INT_FLED1_SHORT : + FLASH_INT_FLED2_SHORT; + } + + ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, &v); + if (ret < 0) + return ret; + + if (v & fault_open_mask) + sub_led->flash_faults |= LED_FAULT_OVER_VOLTAGE; + if (v & fault_short_mask) + sub_led->flash_faults |= LED_FAULT_SHORT_CIRCUIT; + if (v & FLASH_INT_OVER_CURRENT) + sub_led->flash_faults |= LED_FAULT_OVER_CURRENT; + + return 0; +} + +static int max77693_setup(struct max77693_led_device *led, + struct max77693_led_config_data *led_cfg) +{ + struct regmap *rmap = led->regmap; + int i, first_led, last_led, ret; + u32 max_flash_curr[2]; + u8 v; + + /* + * Initialize only flash current. Torch current doesn't + * require initialization as ITORCH register is written with + * new value each time brightness_set op is called. + */ + if (led->iout_joint) { + first_led = FLED1; + last_led = FLED1; + max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1] + + led_cfg->iout_flash_max[FLED2]; + } else { + first_led = max77693_fled_used(led, FLED1) ? FLED1 : FLED2; + last_led = max77693_fled_used(led, FLED2) ? FLED2 : FLED1; + max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1]; + max_flash_curr[FLED2] = led_cfg->iout_flash_max[FLED2]; + } + + for (i = first_led; i <= last_led; ++i) { + ret = max77693_set_flash_current(led, i, + max_flash_curr[i]); + if (ret < 0) + return ret; + } + + v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL; + ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v); + if (ret < 0) + return ret; + + if (led_cfg->low_vsys > 0) + v = max77693_led_vsys_to_reg(led_cfg->low_vsys) | + MAX_FLASH1_MAX_FL_EN; + else + v = 0; + + ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v); + if (ret < 0) + return ret; + ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0); + if (ret < 0) + return ret; + + if (led_cfg->boost_mode == MAX77693_LED_BOOST_FIXED) + v = FLASH_BOOST_FIXED; + else + v = led_cfg->boost_mode | led_cfg->boost_mode << 1; + + if (max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2)) + v |= FLASH_BOOST_LEDNUM_2; + + ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v); + if (ret < 0) + return ret; + + v = max77693_led_vout_to_reg(led_cfg->boost_vout); + ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v); + if (ret < 0) + return ret; + + return max77693_set_mode_reg(led, MODE_OFF); +} + +static int __max77693_led_brightness_set(struct max77693_led_device *led, + int fled_id, enum led_brightness value) +{ + int ret; + + mutex_lock(&led->lock); + + if (value == 0) { + ret = max77693_clear_mode(led, MODE_TORCH(fled_id)); + if (ret < 0) + dev_dbg(&led->pdev->dev, + "Failed to clear torch mode (%d)\n", + ret); + goto unlock; + } + + ret = max77693_set_torch_current(led, fled_id, value * TORCH_IOUT_STEP); + if (ret < 0) { + dev_dbg(&led->pdev->dev, + "Failed to set torch current (%d)\n", + ret); + goto unlock; + } + + ret = max77693_add_mode(led, MODE_TORCH(fled_id)); + if (ret < 0) + dev_dbg(&led->pdev->dev, + "Failed to set torch mode (%d)\n", + ret); +unlock: + mutex_unlock(&led->lock); + return ret; +} + +static void max77693_led_brightness_set_work( + struct work_struct *work) +{ + struct max77693_sub_led *sub_led = + container_of(work, struct max77693_sub_led, + work_brightness_set); + struct max77693_led_device *led = sub_led_to_led(sub_led); + + __max77693_led_brightness_set(led, sub_led->fled_id, + sub_led->torch_brightness); +} + +/* LED subsystem callbacks */ + +static int max77693_led_brightness_set_sync( + struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + struct max77693_led_device *led = sub_led_to_led(sub_led); + + return __max77693_led_brightness_set(led, sub_led->fled_id, value); +} + +static void max77693_led_brightness_set( + struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + + sub_led->torch_brightness = value; + schedule_work(&sub_led->work_brightness_set); +} + +static int max77693_led_flash_brightness_set( + struct led_classdev_flash *fled_cdev, + u32 brightness) +{ + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + struct max77693_led_device *led = sub_led_to_led(sub_led); + int ret; + + mutex_lock(&led->lock); + ret = max77693_set_flash_current(led, sub_led->fled_id, brightness); + mutex_unlock(&led->lock); + + return ret; +} + +static int max77693_led_flash_strobe_set( + struct led_classdev_flash *fled_cdev, + bool state) +{ + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + struct max77693_led_device *led = sub_led_to_led(sub_led); + int fled_id = sub_led->fled_id; + int ret; + + mutex_lock(&led->lock); + + if (!state) { + ret = max77693_clear_mode(led, MODE_FLASH(fled_id)); + goto unlock; + } + + if (sub_led->flash_timeout != led->current_flash_timeout) { + ret = max77693_set_timeout(led, sub_led->flash_timeout); + if (ret < 0) + goto unlock; + } + + led->strobing_sub_led_id = fled_id; + + ret = max77693_add_mode(led, MODE_FLASH(fled_id)); + if (ret < 0) + goto unlock; + + ret = max77693_get_flash_faults(sub_led); + +unlock: + mutex_unlock(&led->lock); + return ret; +} + +static int max77693_led_flash_fault_get( + struct led_classdev_flash *fled_cdev, + u32 *fault) +{ + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + + *fault = sub_led->flash_faults; + + return 0; +} + +static int max77693_led_flash_strobe_get( + struct led_classdev_flash *fled_cdev, + bool *state) +{ + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + struct max77693_led_device *led = sub_led_to_led(sub_led); + int ret; + + if (!state) + return -EINVAL; + + mutex_lock(&led->lock); + + ret = max77693_get_strobe_status(led, state); + + *state = !!(*state && (led->strobing_sub_led_id == sub_led->fled_id)); + + mutex_unlock(&led->lock); + + return ret; +} + +static int max77693_led_flash_timeout_set( + struct led_classdev_flash *fled_cdev, + u32 timeout) +{ + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev); + struct max77693_led_device *led = sub_led_to_led(sub_led); + + mutex_lock(&led->lock); + sub_led->flash_timeout = timeout; + mutex_unlock(&led->lock); + + return 0; +} + +static int max77693_led_parse_dt(struct max77693_led_device *led, + struct max77693_led_config_data *cfg, + struct device_node **sub_nodes) +{ + struct device *dev = &led->pdev->dev; + struct max77693_sub_led *sub_leds = led->sub_leds; + struct device_node *node = dev->of_node, *child_node; + struct property *prop; + u32 led_sources[2]; + int i, ret, fled_id; + + of_property_read_u32(node, "maxim,boost-mode", &cfg->boost_mode); + of_property_read_u32(node, "maxim,boost-mvout", &cfg->boost_vout); + of_property_read_u32(node, "maxim,mvsys-min", &cfg->low_vsys); + + for_each_available_child_of_node(node, child_node) { + prop = of_find_property(child_node, "led-sources", NULL); + if (prop) { + const __be32 *srcs = NULL; + + for (i = 0; i < ARRAY_SIZE(led_sources); ++i) { + srcs = of_prop_next_u32(prop, srcs, + &led_sources[i]); + if (!srcs) + break; + } + } else { + dev_err(dev, + "led-sources DT property missing\n"); + of_node_put(child_node); + return -EINVAL; + } + + if (i == 2) { + fled_id = FLED1; + led->fled_mask = FLED1_IOUT | FLED2_IOUT; + } else if (led_sources[0] == FLED1) { + fled_id = FLED1; + led->fled_mask |= FLED1_IOUT; + } else if (led_sources[0] == FLED2) { + fled_id = FLED2; + led->fled_mask |= FLED2_IOUT; + } else { + dev_err(dev, + "Wrong led-sources DT property value.\n"); + of_node_put(child_node); + return -EINVAL; + } + + if (sub_nodes[fled_id]) { + dev_err(dev, + "Conflicting \"led-sources\" DT properties\n"); + return -EINVAL; + } + + sub_nodes[fled_id] = child_node; + sub_leds[fled_id].fled_id = fled_id; + + cfg->label[fled_id] = + of_get_property(child_node, "label", NULL) ? : + child_node->name; + + ret = of_property_read_u32(child_node, "led-max-microamp", + &cfg->iout_torch_max[fled_id]); + if (ret < 0) { + cfg->iout_torch_max[fled_id] = TORCH_IOUT_MIN; + dev_warn(dev, "led-max-microamp DT property missing\n"); + } + + ret = of_property_read_u32(child_node, "flash-max-microamp", + &cfg->iout_flash_max[fled_id]); + if (ret < 0) { + cfg->iout_flash_max[fled_id] = FLASH_IOUT_MIN; + dev_warn(dev, + "flash-max-microamp DT property missing\n"); + } + + ret = of_property_read_u32(child_node, "flash-max-timeout-us", + &cfg->flash_timeout_max[fled_id]); + if (ret < 0) { + cfg->flash_timeout_max[fled_id] = FLASH_TIMEOUT_MIN; + dev_warn(dev, + "flash-max-timeout-us DT property missing\n"); + } + + if (++cfg->num_leds == 2 || + (max77693_fled_used(led, FLED1) && + max77693_fled_used(led, FLED2))) { + of_node_put(child_node); + break; + } + } + + if (cfg->num_leds == 0) { + dev_err(dev, "No DT child node found for connected LED(s).\n"); + return -EINVAL; + } + + return 0; +} + +static void clamp_align(u32 *v, u32 min, u32 max, u32 step) +{ + *v = clamp_val(*v, min, max); + if (step > 1) + *v = (*v - min) / step * step + min; +} + +static void max77693_align_iout_current(struct max77693_led_device *led, + u32 *iout, u32 min, u32 max, u32 step) +{ + int i; + + if (led->iout_joint) { + if (iout[FLED1] > min) { + iout[FLED1] /= 2; + iout[FLED2] = iout[FLED1]; + } else { + iout[FLED1] = min; + iout[FLED2] = 0; + return; + } + } + + for (i = FLED1; i <= FLED2; ++i) + if (max77693_fled_used(led, i)) + clamp_align(&iout[i], min, max, step); + else + iout[i] = 0; +} + +static void max77693_led_validate_configuration(struct max77693_led_device *led, + struct max77693_led_config_data *cfg) +{ + u32 flash_iout_max = cfg->boost_mode ? FLASH_IOUT_MAX_2LEDS : + FLASH_IOUT_MAX_1LED; + int i; + + if (cfg->num_leds == 1 && + max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2)) + led->iout_joint = true; + + cfg->boost_mode = clamp_val(cfg->boost_mode, MAX77693_LED_BOOST_NONE, + MAX77693_LED_BOOST_FIXED); + + /* Boost must be enabled if both current outputs are used */ + if ((cfg->boost_mode == MAX77693_LED_BOOST_NONE) && led->iout_joint) + cfg->boost_mode = MAX77693_LED_BOOST_FIXED; + + max77693_align_iout_current(led, cfg->iout_torch_max, + TORCH_IOUT_MIN, TORCH_IOUT_MAX, TORCH_IOUT_STEP); + + max77693_align_iout_current(led, cfg->iout_flash_max, + FLASH_IOUT_MIN, flash_iout_max, FLASH_IOUT_STEP); + + for (i = 0; i < ARRAY_SIZE(cfg->flash_timeout_max); ++i) + clamp_align(&cfg->flash_timeout_max[i], FLASH_TIMEOUT_MIN, + FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP); + + clamp_align(&cfg->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX, + FLASH_VOUT_STEP); + + if (cfg->low_vsys) + clamp_align(&cfg->low_vsys, MAX_FLASH1_VSYS_MIN, + MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP); +} + +static int max77693_led_get_configuration(struct max77693_led_device *led, + struct max77693_led_config_data *cfg, + struct device_node **sub_nodes) +{ + int ret; + + ret = max77693_led_parse_dt(led, cfg, sub_nodes); + if (ret < 0) + return ret; + + max77693_led_validate_configuration(led, cfg); + + memcpy(led->iout_torch_max, cfg->iout_torch_max, + sizeof(led->iout_torch_max)); + memcpy(led->iout_flash_max, cfg->iout_flash_max, + sizeof(led->iout_flash_max)); + + return 0; +} + +static const struct led_flash_ops flash_ops = { + .flash_brightness_set = max77693_led_flash_brightness_set, + .strobe_set = max77693_led_flash_strobe_set, + .strobe_get = max77693_led_flash_strobe_get, + .timeout_set = max77693_led_flash_timeout_set, + .fault_get = max77693_led_flash_fault_get, +}; + +static void max77693_init_flash_settings(struct max77693_sub_led *sub_led, + struct max77693_led_config_data *led_cfg) +{ + struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev; + struct max77693_led_device *led = sub_led_to_led(sub_led); + int fled_id = sub_led->fled_id; + struct led_flash_setting *setting; + + /* Init flash intensity setting */ + setting = &fled_cdev->brightness; + setting->min = FLASH_IOUT_MIN; + setting->max = led->iout_joint ? + led_cfg->iout_flash_max[FLED1] + + led_cfg->iout_flash_max[FLED2] : + led_cfg->iout_flash_max[fled_id]; + setting->step = FLASH_IOUT_STEP; + setting->val = setting->max; + + /* Init flash timeout setting */ + setting = &fled_cdev->timeout; + setting->min = FLASH_TIMEOUT_MIN; + setting->max = led_cfg->flash_timeout_max[fled_id]; + setting->step = FLASH_TIMEOUT_STEP; + setting->val = setting->max; +} + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) + +static int max77693_led_external_strobe_set( + struct v4l2_flash *v4l2_flash, + bool enable) +{ + struct max77693_sub_led *sub_led = + flcdev_to_sub_led(v4l2_flash->fled_cdev); + struct max77693_led_device *led = sub_led_to_led(sub_led); + int fled_id = sub_led->fled_id; + int ret; + + mutex_lock(&led->lock); + + if (enable) + ret = max77693_add_mode(led, MODE_FLASH_EXTERNAL(fled_id)); + else + ret = max77693_clear_mode(led, MODE_FLASH_EXTERNAL(fled_id)); + + mutex_unlock(&led->lock); + + return ret; +} + +static void max77693_init_v4l2_flash_config(struct max77693_sub_led *sub_led, + struct max77693_led_config_data *led_cfg, + struct v4l2_flash_config *v4l2_sd_cfg) +{ + struct max77693_led_device *led = sub_led_to_led(sub_led); + struct device *dev = &led->pdev->dev; + struct max77693_dev *iodev = dev_get_drvdata(dev->parent); + struct i2c_client *i2c = iodev->i2c; + struct led_flash_setting *s; + + snprintf(v4l2_sd_cfg->dev_name, sizeof(v4l2_sd_cfg->dev_name), + "%s %d-%04x", sub_led->fled_cdev.led_cdev.name, + i2c_adapter_id(i2c->adapter), i2c->addr); + + s = &v4l2_sd_cfg->torch_intensity; + s->min = TORCH_IOUT_MIN; + s->max = sub_led->fled_cdev.led_cdev.max_brightness * TORCH_IOUT_STEP; + s->step = TORCH_IOUT_STEP; + s->val = s->max; + + /* Init flash faults config */ + v4l2_sd_cfg->flash_faults = LED_FAULT_OVER_VOLTAGE | + LED_FAULT_SHORT_CIRCUIT | + LED_FAULT_OVER_CURRENT; + + v4l2_sd_cfg->has_external_strobe = true; +} + +static const struct v4l2_flash_ops v4l2_flash_ops = { + .external_strobe_set = max77693_led_external_strobe_set, +}; +#else +static inline void max77693_init_v4l2_flash_config( + struct max77693_sub_led *sub_led, + struct max77693_led_config_data *led_cfg, + struct v4l2_flash_config *v4l2_sd_cfg) +{ +} +static const struct v4l2_flash_ops v4l2_flash_ops; +#endif + +static void max77693_init_fled_cdev(struct max77693_sub_led *sub_led, + struct max77693_led_config_data *led_cfg) +{ + struct max77693_led_device *led = sub_led_to_led(sub_led); + int fled_id = sub_led->fled_id; + struct led_classdev_flash *fled_cdev; + struct led_classdev *led_cdev; + + /* Initialize LED Flash class device */ + fled_cdev = &sub_led->fled_cdev; + fled_cdev->ops = &flash_ops; + led_cdev = &fled_cdev->led_cdev; + + led_cdev->name = led_cfg->label[fled_id]; + + led_cdev->brightness_set = max77693_led_brightness_set; + led_cdev->brightness_set_sync = max77693_led_brightness_set_sync; + led_cdev->max_brightness = (led->iout_joint ? + led_cfg->iout_torch_max[FLED1] + + led_cfg->iout_torch_max[FLED2] : + led_cfg->iout_torch_max[fled_id]) / + TORCH_IOUT_STEP; + led_cdev->flags |= LED_DEV_CAP_FLASH; + INIT_WORK(&sub_led->work_brightness_set, + max77693_led_brightness_set_work); + + max77693_init_flash_settings(sub_led, led_cfg); + + /* Init flash timeout cache */ + sub_led->flash_timeout = fled_cdev->timeout.val; +} + +static int max77693_register_led(struct max77693_sub_led *sub_led, + struct max77693_led_config_data *led_cfg, + struct device_node *sub_node) +{ + struct max77693_led_device *led = sub_led_to_led(sub_led); + struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev; + struct device *dev = &led->pdev->dev; + struct v4l2_flash_config v4l2_sd_cfg = {}; + int ret; + + /* Register in the LED subsystem */ + ret = led_classdev_flash_register(dev, fled_cdev); + if (ret < 0) + return ret; + + max77693_init_v4l2_flash_config(sub_led, led_cfg, &v4l2_sd_cfg); + + /* Register in the V4L2 subsystem. */ + sub_led->v4l2_flash = v4l2_flash_init(dev, sub_node, fled_cdev, NULL, + &v4l2_flash_ops, &v4l2_sd_cfg); + if (IS_ERR(sub_led->v4l2_flash)) { + ret = PTR_ERR(sub_led->v4l2_flash); + goto err_v4l2_flash_init; + } + + return 0; + +err_v4l2_flash_init: + led_classdev_flash_unregister(fled_cdev); + return ret; +} + +static int max77693_led_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct max77693_dev *iodev = dev_get_drvdata(dev->parent); + struct max77693_led_device *led; + struct max77693_sub_led *sub_leds; + struct device_node *sub_nodes[2] = {}; + struct max77693_led_config_data led_cfg = {}; + int init_fled_cdev[2], i, ret; + + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->pdev = pdev; + led->regmap = iodev->regmap; + led->allowed_modes = MODE_FLASH_MASK; + sub_leds = led->sub_leds; + + platform_set_drvdata(pdev, led); + ret = max77693_led_get_configuration(led, &led_cfg, sub_nodes); + if (ret < 0) + return ret; + + ret = max77693_setup(led, &led_cfg); + if (ret < 0) + return ret; + + mutex_init(&led->lock); + + init_fled_cdev[FLED1] = + led->iout_joint || max77693_fled_used(led, FLED1); + init_fled_cdev[FLED2] = + !led->iout_joint && max77693_fled_used(led, FLED2); + + for (i = FLED1; i <= FLED2; ++i) { + if (!init_fled_cdev[i]) + continue; + + /* Initialize LED Flash class device */ + max77693_init_fled_cdev(&sub_leds[i], &led_cfg); + + /* + * Register LED Flash class device and corresponding + * V4L2 Flash device. + */ + ret = max77693_register_led(&sub_leds[i], &led_cfg, + sub_nodes[i]); + if (ret < 0) { + /* + * At this moment FLED1 might have been already + * registered and it needs to be released. + */ + if (i == FLED2) + goto err_register_led2; + else + goto err_register_led1; + } + } + + return 0; + +err_register_led2: + /* It is possible than only FLED2 was to be registered */ + if (!init_fled_cdev[FLED1]) + goto err_register_led1; + v4l2_flash_release(sub_leds[FLED1].v4l2_flash); + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev); +err_register_led1: + mutex_destroy(&led->lock); + + return ret; +} + +static int max77693_led_remove(struct platform_device *pdev) +{ + struct max77693_led_device *led = platform_get_drvdata(pdev); + struct max77693_sub_led *sub_leds = led->sub_leds; + + if (led->iout_joint || max77693_fled_used(led, FLED1)) { + v4l2_flash_release(sub_leds[FLED1].v4l2_flash); + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev); + cancel_work_sync(&sub_leds[FLED1].work_brightness_set); + } + + if (!led->iout_joint && max77693_fled_used(led, FLED2)) { + v4l2_flash_release(sub_leds[FLED2].v4l2_flash); + led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev); + cancel_work_sync(&sub_leds[FLED2].work_brightness_set); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct of_device_id max77693_led_dt_match[] = { + { .compatible = "maxim,max77693-led" }, + {}, +}; + +static struct platform_driver max77693_led_driver = { + .probe = max77693_led_probe, + .remove = max77693_led_remove, + .driver = { + .name = "max77693-led", + .of_match_table = max77693_led_dt_match, + }, +}; + +module_platform_driver(max77693_led_driver); + +MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); +MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); +MODULE_DESCRIPTION("Maxim MAX77693 led flash driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c new file mode 100644 index 000000000000..de16c29d7895 --- /dev/null +++ b/drivers/leds/leds-tlc591xx.c @@ -0,0 +1,300 @@ +/* + * Copyright 2014 Belkin Inc. + * Copyright 2015 Andrew Lunn <andrew@lunn.ch> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define TLC591XX_MAX_LEDS 16 + +#define TLC591XX_REG_MODE1 0x00 +#define MODE1_RESPON_ADDR_MASK 0xF0 +#define MODE1_NORMAL_MODE (0 << 4) +#define MODE1_SPEED_MODE (1 << 4) + +#define TLC591XX_REG_MODE2 0x01 +#define MODE2_DIM (0 << 5) +#define MODE2_BLINK (1 << 5) +#define MODE2_OCH_STOP (0 << 3) +#define MODE2_OCH_ACK (1 << 3) + +#define TLC591XX_REG_PWM(x) (0x02 + (x)) + +#define TLC591XX_REG_GRPPWM 0x12 +#define TLC591XX_REG_GRPFREQ 0x13 + +/* LED Driver Output State, determine the source that drives LED outputs */ +#define LEDOUT_OFF 0x0 /* Output LOW */ +#define LEDOUT_ON 0x1 /* Output HI-Z */ +#define LEDOUT_DIM 0x2 /* Dimming */ +#define LEDOUT_BLINK 0x3 /* Blinking */ +#define LEDOUT_MASK 0x3 + +#define ldev_to_led(c) container_of(c, struct tlc591xx_led, ldev) +#define work_to_led(work) container_of(work, struct tlc591xx_led, work) + +struct tlc591xx_led { + bool active; + unsigned int led_no; + struct led_classdev ldev; + struct work_struct work; + struct tlc591xx_priv *priv; +}; + +struct tlc591xx_priv { + struct tlc591xx_led leds[TLC591XX_MAX_LEDS]; + struct regmap *regmap; + unsigned int reg_ledout_offset; +}; + +struct tlc591xx { + unsigned int max_leds; + unsigned int reg_ledout_offset; +}; + +static const struct tlc591xx tlc59116 = { + .max_leds = 16, + .reg_ledout_offset = 0x14, +}; + +static const struct tlc591xx tlc59108 = { + .max_leds = 8, + .reg_ledout_offset = 0x0c, +}; + +static int +tlc591xx_set_mode(struct regmap *regmap, u8 mode) +{ + int err; + u8 val; + + err = regmap_write(regmap, TLC591XX_REG_MODE1, MODE1_NORMAL_MODE); + if (err) + return err; + + val = MODE2_OCH_STOP | mode; + + return regmap_write(regmap, TLC591XX_REG_MODE2, val); +} + +static int +tlc591xx_set_ledout(struct tlc591xx_priv *priv, struct tlc591xx_led *led, + u8 val) +{ + unsigned int i = (led->led_no % 4) * 2; + unsigned int mask = LEDOUT_MASK << i; + unsigned int addr = priv->reg_ledout_offset + (led->led_no >> 2); + + val = val << i; + + return regmap_update_bits(priv->regmap, addr, mask, val); +} + +static int +tlc591xx_set_pwm(struct tlc591xx_priv *priv, struct tlc591xx_led *led, + u8 brightness) +{ + u8 pwm = TLC591XX_REG_PWM(led->led_no); + + return regmap_write(priv->regmap, pwm, brightness); +} + +static void +tlc591xx_led_work(struct work_struct *work) +{ + struct tlc591xx_led *led = work_to_led(work); + struct tlc591xx_priv *priv = led->priv; + enum led_brightness brightness = led->ldev.brightness; + int err; + + switch (brightness) { + case 0: + err = tlc591xx_set_ledout(priv, led, LEDOUT_OFF); + break; + case LED_FULL: + err = tlc591xx_set_ledout(priv, led, LEDOUT_ON); + break; + default: + err = tlc591xx_set_ledout(priv, led, LEDOUT_DIM); + if (!err) + err = tlc591xx_set_pwm(priv, led, brightness); + } + + if (err) + dev_err(led->ldev.dev, "Failed setting brightness\n"); +} + +static void +tlc591xx_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct tlc591xx_led *led = ldev_to_led(led_cdev); + + led->ldev.brightness = brightness; + schedule_work(&led->work); +} + +static void +tlc591xx_destroy_devices(struct tlc591xx_priv *priv, unsigned int j) +{ + int i = j; + + while (--i >= 0) { + if (priv->leds[i].active) { + led_classdev_unregister(&priv->leds[i].ldev); + cancel_work_sync(&priv->leds[i].work); + } + } +} + +static int +tlc591xx_configure(struct device *dev, + struct tlc591xx_priv *priv, + const struct tlc591xx *tlc591xx) +{ + unsigned int i; + int err = 0; + + tlc591xx_set_mode(priv->regmap, MODE2_DIM); + for (i = 0; i < TLC591XX_MAX_LEDS; i++) { + struct tlc591xx_led *led = &priv->leds[i]; + + if (!led->active) + continue; + + led->priv = priv; + led->led_no = i; + led->ldev.brightness_set = tlc591xx_brightness_set; + led->ldev.max_brightness = LED_FULL; + INIT_WORK(&led->work, tlc591xx_led_work); + err = led_classdev_register(dev, &led->ldev); + if (err < 0) { + dev_err(dev, "couldn't register LED %s\n", + led->ldev.name); + goto exit; + } + } + + return 0; + +exit: + tlc591xx_destroy_devices(priv, i); + return err; +} + +static const struct regmap_config tlc591xx_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x1e, +}; + +static const struct of_device_id of_tlc591xx_leds_match[] = { + { .compatible = "ti,tlc59116", + .data = &tlc59116 }, + { .compatible = "ti,tlc59108", + .data = &tlc59108 }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_tlc591xx_leds_match); + +static int +tlc591xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node, *child; + struct device *dev = &client->dev; + const struct of_device_id *match; + const struct tlc591xx *tlc591xx; + struct tlc591xx_priv *priv; + int err, count, reg; + + match = of_match_device(of_tlc591xx_leds_match, dev); + if (!match) + return -ENODEV; + + tlc591xx = match->data; + if (!np) + return -ENODEV; + + count = of_get_child_count(np); + if (!count || count > tlc591xx->max_leds) + return -EINVAL; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(client, &tlc591xx_regmap); + if (IS_ERR(priv->regmap)) { + err = PTR_ERR(priv->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", err); + return err; + } + priv->reg_ledout_offset = tlc591xx->reg_ledout_offset; + + i2c_set_clientdata(client, priv); + + for_each_child_of_node(np, child) { + err = of_property_read_u32(child, "reg", ®); + if (err) + return err; + if (reg < 0 || reg >= tlc591xx->max_leds) + return -EINVAL; + if (priv->leds[reg].active) + return -EINVAL; + priv->leds[reg].active = true; + priv->leds[reg].ldev.name = + of_get_property(child, "label", NULL) ? : child->name; + priv->leds[reg].ldev.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + } + return tlc591xx_configure(dev, priv, tlc591xx); +} + +static int +tlc591xx_remove(struct i2c_client *client) +{ + struct tlc591xx_priv *priv = i2c_get_clientdata(client); + + tlc591xx_destroy_devices(priv, TLC591XX_MAX_LEDS); + + return 0; +} + +static const struct i2c_device_id tlc591xx_id[] = { + { "tlc59116" }, + { "tlc59108" }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, tlc591xx_id); + +static struct i2c_driver tlc591xx_driver = { + .driver = { + .name = "tlc591xx", + .of_match_table = of_match_ptr(of_tlc591xx_leds_match), + }, + .probe = tlc591xx_probe, + .remove = tlc591xx_remove, + .id_table = tlc591xx_id, +}; + +module_i2c_driver(tlc591xx_driver); + +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TLC591XX LED driver"); diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h index 79efe57c7405..bc89d7ace2c4 100644 --- a/drivers/leds/leds.h +++ b/drivers/leds/leds.h @@ -13,7 +13,6 @@ #ifndef __LEDS_H_INCLUDED #define __LEDS_H_INCLUDED -#include <linux/device.h> #include <linux/rwsem.h> #include <linux/leds.h> @@ -50,27 +49,4 @@ void led_stop_software_blink(struct led_classdev *led_cdev); extern struct rw_semaphore leds_list_lock; extern struct list_head leds_list; -#ifdef CONFIG_LEDS_TRIGGERS -void led_trigger_set_default(struct led_classdev *led_cdev); -void led_trigger_set(struct led_classdev *led_cdev, - struct led_trigger *trigger); -void led_trigger_remove(struct led_classdev *led_cdev); - -static inline void *led_get_trigger_data(struct led_classdev *led_cdev) -{ - return led_cdev->trigger_data; -} - -#else -#define led_trigger_set_default(x) do {} while (0) -#define led_trigger_set(x, y) do {} while (0) -#define led_trigger_remove(x) do {} while (0) -#define led_get_trigger_data(x) (NULL) -#endif - -ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count); -ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr, - char *buf); - #endif /* __LEDS_H_INCLUDED */ |
