diff options
Diffstat (limited to 'drivers/isdn/hardware/eicon/pc_init.h')
| -rw-r--r-- | drivers/isdn/hardware/eicon/pc_init.h | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/eicon/pc_init.h b/drivers/isdn/hardware/eicon/pc_init.h new file mode 100644 index 000000000000..a616fc9d32e9 --- /dev/null +++ b/drivers/isdn/hardware/eicon/pc_init.h @@ -0,0 +1,267 @@ + +/* + * + Copyright (c) Eicon Networks, 2002. + * + This source file is supplied for the use with + Eicon Networks range of DIVA Server Adapters. + * + Eicon File Revision : 2.1 + * + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + * + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY + implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + * + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#ifndef PC_INIT_H_ +#define PC_INIT_H_ +/*------------------------------------------------------------------*/ +/* + Initialisation parameters for the card + 0x0008 <byte> TEI + 0x0009 <byte> NT2 flag + 0x000a <byte> Default DID length + 0x000b <byte> Disable watchdog flag + 0x000c <byte> Permanent connection flag + 0x000d <byte> Bit 3-8: L1 Hunt Group/Tristate + 0x000d <byte> Bit 1: QSig small CR length if set to 1 + 0x000d <byte> Bit 2: QSig small CHI length if set to 1 + 0x000e <byte> Bit 1-3: Stable L2, 0=OnDemand,1=NoDisc,2=permanent + 0x000e <byte> Bit 4: NT mode + 0x000e <byte> Bit 5: QSig Channel ID format + 0x000e <byte> Bit 6: QSig Call Forwarding Allowed Flag + 0x000e <byte> Bit 7: Disable AutoSPID Flag + 0x000f <byte> No order check flag + 0x0010 <byte> Force companding type:0=default,1=a-law,2=u-law + 0x0012 <byte> Low channel flag + 0x0013 <byte> Protocol version + 0x0014 <byte> CRC4 option:0=default,1=double_frm,2=multi_frm,3=auto + 0x0015 <byte> Bit 0: NoHscx30, Bit 1: Loopback flag, Bit 2: ForceHscx30 + 0x0016 <byte> DSP info + 0x0017-0x0019 Serial number + 0x001a <byte> Card type + 0x0020 <string> OAD 0 + 0x0040 <string> OSA 0 + 0x0060 <string> SPID 0 (if not T.1) + 0x0060 <struct> if T.1: Robbed Bit Configuration + 0x0060 length (8) + 0x0061 RBS Answer Delay + 0x0062 RBS Config Bit 3, 4: + 0 0 -> Wink Start + 1 0 -> Loop Start + 0 1 -> Ground Start + 1 1 -> reserved + Bit 5, 6: + 0 0 -> Pulse Dial -> Rotary + 1 0 -> DTMF + 0 1 -> MF + 1 1 -> reserved + 0x0063 RBS RX Digit Timeout + 0x0064 RBS Bearer Capability + 0x0065-0x0069 RBS Debug Mask + 0x0080 <string> OAD 1 + 0x00a0 <string> OSA 1 + 0x00c0 <string> SPID 1 + 0x00e0 <w-element list> Additional configuration +*/ +#define PCINIT_END_OF_LIST 0x00 +#define PCINIT_MODEM_GUARD_TONE 0x01 +#define PCINIT_MODEM_MIN_SPEED 0x02 +#define PCINIT_MODEM_MAX_SPEED 0x03 +#define PCINIT_MODEM_PROTOCOL_OPTIONS 0x04 +#define PCINIT_FAX_OPTIONS 0x05 +#define PCINIT_FAX_MAX_SPEED 0x06 +#define PCINIT_MODEM_OPTIONS 0x07 +#define PCINIT_MODEM_NEGOTIATION_MODE 0x08 +#define PCINIT_MODEM_MODULATIONS_MASK 0x09 +#define PCINIT_MODEM_TRANSMIT_LEVEL 0x0a +#define PCINIT_FAX_DISABLED_RESOLUTIONS 0x0b +#define PCINIT_FAX_MAX_RECORDING_WIDTH 0x0c +#define PCINIT_FAX_MAX_RECORDING_LENGTH 0x0d +#define PCINIT_FAX_MIN_SCANLINE_TIME 0x0e +#define PCINIT_US_EKTS_CACH_HANDLES 0x0f +#define PCINIT_US_EKTS_BEGIN_CONF 0x10 +#define PCINIT_US_EKTS_DROP_CONF 0x11 +#define PCINIT_US_EKTS_CALL_TRANSFER 0x12 +#define PCINIT_RINGERTONE_OPTION 0x13 +#define PCINIT_CARD_ADDRESS 0x14 +#define PCINIT_FPGA_FEATURES 0x15 +#define PCINIT_US_EKTS_MWI 0x16 +#define PCINIT_MODEM_SPEAKER_CONTROL 0x17 +#define PCINIT_MODEM_SPEAKER_VOLUME 0x18 +#define PCINIT_MODEM_CARRIER_WAIT_TIME 0x19 +#define PCINIT_MODEM_CARRIER_LOSS_TIME 0x1a +#define PCINIT_UNCHAN_B_MASK 0x1b +#define PCINIT_PART68_LIMITER 0x1c +#define PCINIT_XDI_FEATURES 0x1d +#define PCINIT_QSIG_DIALECT 0x1e +#define PCINIT_DISABLE_AUTOSPID_FLAG 0x1f +#define PCINIT_FORCE_VOICE_MAIL_ALERT 0x20 +#define PCINIT_PIAFS_TURNAROUND_FRAMES 0x21 +#define PCINIT_L2_COUNT 0x22 +#define PCINIT_QSIG_FEATURES 0x23 +#define PCINIT_NO_SIGNALLING 0x24 +#define PCINIT_CARD_SN 0x25 +#define PCINIT_CARD_PORT 0x26 +#define PCINIT_ALERTTO 0x27 +#define PCINIT_MODEM_EYE_SETUP 0x28 +#define PCINIT_FAX_V34_OPTIONS 0x29 +/*------------------------------------------------------------------*/ +#define PCINIT_MODEM_GUARD_TONE_NONE 0x00 +#define PCINIT_MODEM_GUARD_TONE_550HZ 0x01 +#define PCINIT_MODEM_GUARD_TONE_1800HZ 0x02 +#define PCINIT_MODEM_GUARD_TONE_CHOICES 0x03 +#define PCINIT_MODEMPROT_DISABLE_V42_V42BIS 0x0001 +#define PCINIT_MODEMPROT_DISABLE_MNP_MNP5 0x0002 +#define PCINIT_MODEMPROT_REQUIRE_PROTOCOL 0x0004 +#define PCINIT_MODEMPROT_DISABLE_V42_DETECT 0x0008 +#define PCINIT_MODEMPROT_DISABLE_COMPRESSION 0x0010 +#define PCINIT_MODEMPROT_REQUIRE_PROTOCOL_V34UP 0x0020 +#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_1200 0x0100 +#define PCINIT_MODEMPROT_BUFFER_IN_V42_DETECT 0x0200 +#define PCINIT_MODEMPROT_DISABLE_V42_SREJ 0x0400 +#define PCINIT_MODEMPROT_DISABLE_MNP3 0x0800 +#define PCINIT_MODEMPROT_DISABLE_MNP4 0x1000 +#define PCINIT_MODEMPROT_DISABLE_MNP10 0x2000 +#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_V22BIS 0x4000 +#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_V32BIS 0x8000 +#define PCINIT_MODEMCONFIG_LEASED_LINE_MODE 0x00000001L +#define PCINIT_MODEMCONFIG_4_WIRE_OPERATION 0x00000002L +#define PCINIT_MODEMCONFIG_DISABLE_BUSY_DETECT 0x00000004L +#define PCINIT_MODEMCONFIG_DISABLE_CALLING_TONE 0x00000008L +#define PCINIT_MODEMCONFIG_DISABLE_ANSWER_TONE 0x00000010L +#define PCINIT_MODEMCONFIG_ENABLE_DIAL_TONE_DET 0x00000020L +#define PCINIT_MODEMCONFIG_USE_POTS_INTERFACE 0x00000040L +#define PCINIT_MODEMCONFIG_FORCE_RAY_TAYLOR_FAX 0x00000080L +#define PCINIT_MODEMCONFIG_DISABLE_RETRAIN 0x00000100L +#define PCINIT_MODEMCONFIG_DISABLE_STEPDOWN 0x00000200L +#define PCINIT_MODEMCONFIG_DISABLE_SPLIT_SPEED 0x00000400L +#define PCINIT_MODEMCONFIG_DISABLE_TRELLIS 0x00000800L +#define PCINIT_MODEMCONFIG_ALLOW_RDL_TEST_LOOP 0x00001000L +#define PCINIT_MODEMCONFIG_DISABLE_STEPUP 0x00002000L +#define PCINIT_MODEMCONFIG_DISABLE_FLUSH_TIMER 0x00004000L +#define PCINIT_MODEMCONFIG_REVERSE_DIRECTION 0x00008000L +#define PCINIT_MODEMCONFIG_DISABLE_TX_REDUCTION 0x00010000L +#define PCINIT_MODEMCONFIG_DISABLE_PRECODING 0x00020000L +#define PCINIT_MODEMCONFIG_DISABLE_PREEMPHASIS 0x00040000L +#define PCINIT_MODEMCONFIG_DISABLE_SHAPING 0x00080000L +#define PCINIT_MODEMCONFIG_DISABLE_NONLINEAR_EN 0x00100000L +#define PCINIT_MODEMCONFIG_DISABLE_MANUALREDUCT 0x00200000L +#define PCINIT_MODEMCONFIG_DISABLE_16_POINT_TRN 0x00400000L +#define PCINIT_MODEMCONFIG_DISABLE_2400_SYMBOLS 0x01000000L +#define PCINIT_MODEMCONFIG_DISABLE_2743_SYMBOLS 0x02000000L +#define PCINIT_MODEMCONFIG_DISABLE_2800_SYMBOLS 0x04000000L +#define PCINIT_MODEMCONFIG_DISABLE_3000_SYMBOLS 0x08000000L +#define PCINIT_MODEMCONFIG_DISABLE_3200_SYMBOLS 0x10000000L +#define PCINIT_MODEMCONFIG_DISABLE_3429_SYMBOLS 0x20000000L +#define PCINIT_MODEM_NEGOTIATE_HIGHEST 0x00 +#define PCINIT_MODEM_NEGOTIATE_DISABLED 0x01 +#define PCINIT_MODEM_NEGOTIATE_IN_CLASS 0x02 +#define PCINIT_MODEM_NEGOTIATE_V100 0x03 +#define PCINIT_MODEM_NEGOTIATE_V8 0x04 +#define PCINIT_MODEM_NEGOTIATE_V8BIS 0x05 +#define PCINIT_MODEM_NEGOTIATE_CHOICES 0x06 +#define PCINIT_MODEMMODULATION_DISABLE_V21 0x00000001L +#define PCINIT_MODEMMODULATION_DISABLE_V23 0x00000002L +#define PCINIT_MODEMMODULATION_DISABLE_V22 0x00000004L +#define PCINIT_MODEMMODULATION_DISABLE_V22BIS 0x00000008L +#define PCINIT_MODEMMODULATION_DISABLE_V32 0x00000010L +#define PCINIT_MODEMMODULATION_DISABLE_V32BIS 0x00000020L +#define PCINIT_MODEMMODULATION_DISABLE_V34 0x00000040L +#define PCINIT_MODEMMODULATION_DISABLE_V90 0x00000080L +#define PCINIT_MODEMMODULATION_DISABLE_BELL103 0x00000100L +#define PCINIT_MODEMMODULATION_DISABLE_BELL212A 0x00000200L +#define PCINIT_MODEMMODULATION_DISABLE_VFC 0x00000400L +#define PCINIT_MODEMMODULATION_DISABLE_K56FLEX 0x00000800L +#define PCINIT_MODEMMODULATION_DISABLE_X2 0x00001000L +#define PCINIT_MODEMMODULATION_ENABLE_V29FDX 0x00010000L +#define PCINIT_MODEMMODULATION_ENABLE_V33 0x00020000L +#define PCINIT_MODEMMODULATION_ENABLE_V90A 0x00040000L +#define PCINIT_MODEM_TRANSMIT_LEVEL_CHOICES 0x10 +#define PCINIT_MODEM_SPEAKER_OFF 0x00 +#define PCINIT_MODEM_SPEAKER_DURING_TRAIN 0x01 +#define PCINIT_MODEM_SPEAKER_TIL_CONNECT 0x02 +#define PCINIT_MODEM_SPEAKER_ALWAYS_ON 0x03 +#define PCINIT_MODEM_SPEAKER_CHOICES 0x04 +#define PCINIT_MODEM_SPEAKER_VOLUME_MIN 0x00 +#define PCINIT_MODEM_SPEAKER_VOLUME_LOW 0x01 +#define PCINIT_MODEM_SPEAKER_VOLUME_HIGH 0x02 +#define PCINIT_MODEM_SPEAKER_VOLUME_MAX 0x03 +#define PCINIT_MODEM_SPEAKER_VOLUME_CHOICES 0x04 +/*------------------------------------------------------------------*/ +#define PCINIT_FAXCONFIG_DISABLE_FINE 0x0001 +#define PCINIT_FAXCONFIG_DISABLE_ECM 0x0002 +#define PCINIT_FAXCONFIG_ECM_64_BYTES 0x0004 +#define PCINIT_FAXCONFIG_DISABLE_2D_CODING 0x0008 +#define PCINIT_FAXCONFIG_DISABLE_T6_CODING 0x0010 +#define PCINIT_FAXCONFIG_DISABLE_UNCOMPR 0x0020 +#define PCINIT_FAXCONFIG_REFUSE_POLLING 0x0040 +#define PCINIT_FAXCONFIG_HIDE_TOTAL_PAGES 0x0080 +#define PCINIT_FAXCONFIG_HIDE_ALL_HEADLINE 0x0100 +#define PCINIT_FAXCONFIG_HIDE_PAGE_INFO 0x0180 +#define PCINIT_FAXCONFIG_HEADLINE_OPTIONS_MASK 0x0180 +#define PCINIT_FAXCONFIG_DISABLE_FEATURE_FALLBACK 0x0200 +#define PCINIT_FAXCONFIG_V34FAX_CONTROL_RATE_1200 0x0800 +#define PCINIT_FAXCONFIG_DISABLE_V34FAX 0x1000 +#define PCINIT_FAXCONFIG_DISABLE_R8_0770_OR_200 0x01 +#define PCINIT_FAXCONFIG_DISABLE_R8_1540 0x02 +#define PCINIT_FAXCONFIG_DISABLE_R16_1540_OR_400 0x04 +#define PCINIT_FAXCONFIG_DISABLE_R4_0385_OR_100 0x08 +#define PCINIT_FAXCONFIG_DISABLE_300_300 0x10 +#define PCINIT_FAXCONFIG_DISABLE_INCH_BASED 0x40 +#define PCINIT_FAXCONFIG_DISABLE_METRIC_BASED 0x80 +#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_A3 0 +#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_B4 1 +#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_A4 2 +#define PCINIT_FAXCONFIG_REC_WIDTH_COUNT 3 +#define PCINIT_FAXCONFIG_REC_LENGTH_UNLIMITED 0 +#define PCINIT_FAXCONFIG_REC_LENGTH_ISO_B4 1 +#define PCINIT_FAXCONFIG_REC_LENGTH_ISO_A4 2 +#define PCINIT_FAXCONFIG_REC_LENGTH_COUNT 3 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_00_00_00 0 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_05_05_05 1 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_05_05 2 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_10_10 3 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_10_10 4 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_20_20 5 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_20_20 6 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_40_40 7 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_8 8 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_9 9 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_10 10 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_10_05 11 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_10_05 12 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_20_10 13 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_20_10 14 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_40_20 15 +#define PCINIT_FAXCONFIG_SCANLINE_TIME_COUNT 16 +#define PCINIT_FAXCONFIG_DISABLE_TX_REDUCTION 0x00010000L +#define PCINIT_FAXCONFIG_DISABLE_PRECODING 0x00020000L +#define PCINIT_FAXCONFIG_DISABLE_PREEMPHASIS 0x00040000L +#define PCINIT_FAXCONFIG_DISABLE_SHAPING 0x00080000L +#define PCINIT_FAXCONFIG_DISABLE_NONLINEAR_EN 0x00100000L +#define PCINIT_FAXCONFIG_DISABLE_MANUALREDUCT 0x00200000L +#define PCINIT_FAXCONFIG_DISABLE_16_POINT_TRN 0x00400000L +#define PCINIT_FAXCONFIG_DISABLE_2400_SYMBOLS 0x01000000L +#define PCINIT_FAXCONFIG_DISABLE_2743_SYMBOLS 0x02000000L +#define PCINIT_FAXCONFIG_DISABLE_2800_SYMBOLS 0x04000000L +#define PCINIT_FAXCONFIG_DISABLE_3000_SYMBOLS 0x08000000L +#define PCINIT_FAXCONFIG_DISABLE_3200_SYMBOLS 0x10000000L +#define PCINIT_FAXCONFIG_DISABLE_3429_SYMBOLS 0x20000000L +/*--------------------------------------------------------------------------*/ +#define PCINIT_XDI_CMA_FOR_ALL_NL_PRIMITIVES 0x01 +/*--------------------------------------------------------------------------*/ +#define PCINIT_FPGA_PLX_ACCESS_SUPPORTED 0x01 +/*--------------------------------------------------------------------------*/ +#endif +/*--------------------------------------------------------------------------*/ |
