summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/irqchip')
-rw-r--r--drivers/irqchip/Makefile2
-rw-r--r--drivers/irqchip/irq-metag-ext.c871
-rw-r--r--drivers/irqchip/irq-metag.c343
3 files changed, 0 insertions, 1216 deletions
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index de7cf483e1b7..110de02bb215 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -15,8 +15,6 @@ obj-$(CONFIG_IRQ_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o
obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
-obj-$(CONFIG_METAG) += irq-metag-ext.o
-obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
obj-$(CONFIG_OMPIC) += irq-ompic.o
obj-$(CONFIG_OR1K_PIC) += irq-or1k-pic.o
diff --git a/drivers/irqchip/irq-metag-ext.c b/drivers/irqchip/irq-metag-ext.c
deleted file mode 100644
index e67483161f0f..000000000000
--- a/drivers/irqchip/irq-metag-ext.c
+++ /dev/null
@@ -1,871 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Meta External interrupt code.
- *
- * Copyright (C) 2005-2012 Imagination Technologies Ltd.
- *
- * External interrupts on Meta are configured at two-levels, in the CPU core and
- * in the external trigger block. Interrupts from SoC peripherals are
- * multiplexed onto a single Meta CPU "trigger" - traditionally it has always
- * been trigger 2 (TR2). For info on how de-multiplexing happens check out
- * meta_intc_irq_demux().
- */
-
-#include <linux/interrupt.h>
-#include <linux/irqchip/metag-ext.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/irq.h>
-#include <asm/hwthread.h>
-
-#define HWSTAT_STRIDE 8
-#define HWVEC_BLK_STRIDE 0x1000
-
-/**
- * struct meta_intc_priv - private meta external interrupt data
- * @nr_banks: Number of interrupt banks
- * @domain: IRQ domain for all banks of external IRQs
- * @unmasked: Record of unmasked IRQs
- * @levels_altered: Record of altered level bits
- */
-struct meta_intc_priv {
- unsigned int nr_banks;
- struct irq_domain *domain;
-
- unsigned long unmasked[4];
-
-#ifdef CONFIG_METAG_SUSPEND_MEM
- unsigned long levels_altered[4];
-#endif
-};
-
-/* Private data for the one and only external interrupt controller */
-static struct meta_intc_priv meta_intc_priv;
-
-/**
- * meta_intc_offset() - Get the offset into the bank of a hardware IRQ number
- * @hw: Hardware IRQ number (within external trigger block)
- *
- * Returns: Bit offset into the IRQ's bank registers
- */
-static unsigned int meta_intc_offset(irq_hw_number_t hw)
-{
- return hw & 0x1f;
-}
-
-/**
- * meta_intc_bank() - Get the bank number of a hardware IRQ number
- * @hw: Hardware IRQ number (within external trigger block)
- *
- * Returns: Bank number indicating which register the IRQ's bits are
- */
-static unsigned int meta_intc_bank(irq_hw_number_t hw)
-{
- return hw >> 5;
-}
-
-/**
- * meta_intc_stat_addr() - Get the address of a HWSTATEXT register
- * @hw: Hardware IRQ number (within external trigger block)
- *
- * Returns: Address of a HWSTATEXT register containing the status bit for
- * the specified hardware IRQ number
- */
-static void __iomem *meta_intc_stat_addr(irq_hw_number_t hw)
-{
- return (void __iomem *)(HWSTATEXT +
- HWSTAT_STRIDE * meta_intc_bank(hw));
-}
-
-/**
- * meta_intc_level_addr() - Get the address of a HWLEVELEXT register
- * @hw: Hardware IRQ number (within external trigger block)
- *
- * Returns: Address of a HWLEVELEXT register containing the sense bit for
- * the specified hardware IRQ number
- */
-static void __iomem *meta_intc_level_addr(irq_hw_number_t hw)
-{
- return (void __iomem *)(HWLEVELEXT +
- HWSTAT_STRIDE * meta_intc_bank(hw));
-}
-
-/**
- * meta_intc_mask_addr() - Get the address of a HWMASKEXT register
- * @hw: Hardware IRQ number (within external trigger block)
- *
- * Returns: Address of a HWMASKEXT register containing the mask bit for the
- * specified hardware IRQ number
- */
-static void __iomem *meta_intc_mask_addr(irq_hw_number_t hw)
-{
- return (void __iomem *)(HWMASKEXT +
- HWSTAT_STRIDE * meta_intc_bank(hw));
-}
-
-/**
- * meta_intc_vec_addr() - Get the vector address of a hardware interrupt
- * @hw: Hardware IRQ number (within external trigger block)
- *
- * Returns: Address of a HWVECEXT register controlling the core trigger to
- * vector the IRQ onto
- */
-static inline void __iomem *meta_intc_vec_addr(irq_hw_number_t hw)
-{
- return (void __iomem *)(HWVEC0EXT +
- HWVEC_BLK_STRIDE * meta_intc_bank(hw) +
- HWVECnEXT_STRIDE * meta_intc_offset(hw));
-}
-
-/**
- * meta_intc_startup_irq() - set up an external irq
- * @data: data for the external irq to start up
- *
- * Multiplex interrupts for irq onto TR2. Clear any pending interrupts and
- * unmask irq, both using the appropriate callbacks.
- */
-static unsigned int meta_intc_startup_irq(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- void __iomem *vec_addr = meta_intc_vec_addr(hw);
- int thread = hard_processor_id();
-
- /* Perform any necessary acking. */
- if (data->chip->irq_ack)
- data->chip->irq_ack(data);
-
- /* Wire up this interrupt to the core with HWVECxEXT. */
- metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr);
-
- /* Perform any necessary unmasking. */
- data->chip->irq_unmask(data);
-
- return 0;
-}
-
-/**
- * meta_intc_shutdown_irq() - turn off an external irq
- * @data: data for the external irq to turn off
- *
- * Mask irq using the appropriate callback and stop muxing it onto TR2.
- */
-static void meta_intc_shutdown_irq(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- void __iomem *vec_addr = meta_intc_vec_addr(hw);
-
- /* Mask the IRQ */
- data->chip->irq_mask(data);
-
- /*
- * Disable the IRQ at the core by removing the interrupt from
- * the HW vector mapping.
- */
- metag_out32(0, vec_addr);
-}
-
-/**
- * meta_intc_ack_irq() - acknowledge an external irq
- * @data: data for the external irq to ack
- *
- * Clear down an edge interrupt in the status register.
- */
-static void meta_intc_ack_irq(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *stat_addr = meta_intc_stat_addr(hw);
-
- /* Ack the int, if it is still 'on'.
- * NOTE - this only works for edge triggered interrupts.
- */
- if (metag_in32(stat_addr) & bit)
- metag_out32(bit, stat_addr);
-}
-
-/**
- * record_irq_is_masked() - record the IRQ masked so it doesn't get handled
- * @data: data for the external irq to record
- *
- * This should get called whenever an external IRQ is masked (by whichever
- * callback is used). It records the IRQ masked so that it doesn't get handled
- * if it still shows up in the status register.
- */
-static void record_irq_is_masked(struct irq_data *data)
-{
- struct meta_intc_priv *priv = &meta_intc_priv;
- irq_hw_number_t hw = data->hwirq;
-
- clear_bit(meta_intc_offset(hw), &priv->unmasked[meta_intc_bank(hw)]);
-}
-
-/**
- * record_irq_is_unmasked() - record the IRQ unmasked so it can be handled
- * @data: data for the external irq to record
- *
- * This should get called whenever an external IRQ is unmasked (by whichever
- * callback is used). It records the IRQ unmasked so that it gets handled if it
- * shows up in the status register.
- */
-static void record_irq_is_unmasked(struct irq_data *data)
-{
- struct meta_intc_priv *priv = &meta_intc_priv;
- irq_hw_number_t hw = data->hwirq;
-
- set_bit(meta_intc_offset(hw), &priv->unmasked[meta_intc_bank(hw)]);
-}
-
-/*
- * For use by wrapper IRQ drivers
- */
-
-/**
- * meta_intc_mask_irq_simple() - minimal mask used by wrapper IRQ drivers
- * @data: data for the external irq being masked
- *
- * This should be called by any wrapper IRQ driver mask functions. it doesn't do
- * any masking but records the IRQ as masked so that the core code knows the
- * mask has taken place. It is the callers responsibility to ensure that the IRQ
- * won't trigger an interrupt to the core.
- */
-void meta_intc_mask_irq_simple(struct irq_data *data)
-{
- record_irq_is_masked(data);
-}
-
-/**
- * meta_intc_unmask_irq_simple() - minimal unmask used by wrapper IRQ drivers
- * @data: data for the external irq being unmasked
- *
- * This should be called by any wrapper IRQ driver unmask functions. it doesn't
- * do any unmasking but records the IRQ as unmasked so that the core code knows
- * the unmask has taken place. It is the callers responsibility to ensure that
- * the IRQ can now trigger an interrupt to the core.
- */
-void meta_intc_unmask_irq_simple(struct irq_data *data)
-{
- record_irq_is_unmasked(data);
-}
-
-
-/**
- * meta_intc_mask_irq() - mask an external irq using HWMASKEXT
- * @data: data for the external irq to mask
- *
- * This is a default implementation of a mask function which makes use of the
- * HWMASKEXT registers available in newer versions.
- *
- * Earlier versions without these registers should use SoC level IRQ masking
- * which call the meta_intc_*_simple() functions above, or if that isn't
- * available should use the fallback meta_intc_*_nomask() functions below.
- */
-static void meta_intc_mask_irq(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *mask_addr = meta_intc_mask_addr(hw);
- unsigned long flags;
-
- record_irq_is_masked(data);
-
- /* update the interrupt mask */
- __global_lock2(flags);
- metag_out32(metag_in32(mask_addr) & ~bit, mask_addr);
- __global_unlock2(flags);
-}
-
-/**
- * meta_intc_unmask_irq() - unmask an external irq using HWMASKEXT
- * @data: data for the external irq to unmask
- *
- * This is a default implementation of an unmask function which makes use of the
- * HWMASKEXT registers available on new versions. It should be paired with
- * meta_intc_mask_irq() above.
- */
-static void meta_intc_unmask_irq(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *mask_addr = meta_intc_mask_addr(hw);
- unsigned long flags;
-
- record_irq_is_unmasked(data);
-
- /* update the interrupt mask */
- __global_lock2(flags);
- metag_out32(metag_in32(mask_addr) | bit, mask_addr);
- __global_unlock2(flags);
-}
-
-/**
- * meta_intc_mask_irq_nomask() - mask an external irq by unvectoring
- * @data: data for the external irq to mask
- *
- * This is the version of the mask function for older versions which don't have
- * HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the IRQ is
- * unvectored from the core and retriggered if necessary later.
- */
-static void meta_intc_mask_irq_nomask(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- void __iomem *vec_addr = meta_intc_vec_addr(hw);
-
- record_irq_is_masked(data);
-
- /* there is no interrupt mask, so unvector the interrupt */
- metag_out32(0, vec_addr);
-}
-
-/**
- * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring
- * @data: data for the external irq to unmask
- *
- * This is the version of the unmask function for older versions which don't
- * have HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the
- * IRQ is revectored back to the core and retriggered if necessary.
- *
- * The retriggering done by this function is specific to edge interrupts.
- */
-static void meta_intc_unmask_edge_irq_nomask(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *stat_addr = meta_intc_stat_addr(hw);
- void __iomem *vec_addr = meta_intc_vec_addr(hw);
- unsigned int thread = hard_processor_id();
-
- record_irq_is_unmasked(data);
-
- /* there is no interrupt mask, so revector the interrupt */
- metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr);
-
- /*
- * Re-trigger interrupt
- *
- * Writing a 1 toggles, and a 0->1 transition triggers. We only
- * retrigger if the status bit is already set, which means we
- * need to clear it first. Retriggering is fundamentally racy
- * because if the interrupt fires again after we clear it we
- * could end up clearing it again and the interrupt handler
- * thinking it hasn't fired. Therefore we need to keep trying to
- * retrigger until the bit is set.
- */
- if (metag_in32(stat_addr) & bit) {
- metag_out32(bit, stat_addr);
- while (!(metag_in32(stat_addr) & bit))
- metag_out32(bit, stat_addr);
- }
-}
-
-/**
- * meta_intc_unmask_level_irq_nomask() - unmask a level irq by revectoring
- * @data: data for the external irq to unmask
- *
- * This is the version of the unmask function for older versions which don't
- * have HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the
- * IRQ is revectored back to the core and retriggered if necessary.
- *
- * The retriggering done by this function is specific to level interrupts.
- */
-static void meta_intc_unmask_level_irq_nomask(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *stat_addr = meta_intc_stat_addr(hw);
- void __iomem *vec_addr = meta_intc_vec_addr(hw);
- unsigned int thread = hard_processor_id();
-
- record_irq_is_unmasked(data);
-
- /* there is no interrupt mask, so revector the interrupt */
- metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr);
-
- /* Re-trigger interrupt */
- /* Writing a 1 triggers interrupt */
- if (metag_in32(stat_addr) & bit)
- metag_out32(bit, stat_addr);
-}
-
-/**
- * meta_intc_irq_set_type() - set the type of an external irq
- * @data: data for the external irq to set the type of
- * @flow_type: new irq flow type
- *
- * Set the flow type of an external interrupt. This updates the irq chip and irq
- * handler depending on whether the irq is edge or level sensitive (the polarity
- * is ignored), and also sets up the bit in HWLEVELEXT so the hardware knows
- * when to trigger.
- */
-static int meta_intc_irq_set_type(struct irq_data *data, unsigned int flow_type)
-{
-#ifdef CONFIG_METAG_SUSPEND_MEM
- struct meta_intc_priv *priv = &meta_intc_priv;
-#endif
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *level_addr = meta_intc_level_addr(hw);
- unsigned long flags;
- unsigned int level;
-
- /* update the chip/handler */
- if (flow_type & IRQ_TYPE_LEVEL_MASK)
- irq_set_chip_handler_name_locked(data, &meta_intc_level_chip,
- handle_level_irq, NULL);
- else
- irq_set_chip_handler_name_locked(data, &meta_intc_edge_chip,
- handle_edge_irq, NULL);
-
- /* and clear/set the bit in HWLEVELEXT */
- __global_lock2(flags);
- level = metag_in32(level_addr);
- if (flow_type & IRQ_TYPE_LEVEL_MASK)
- level |= bit;
- else
- level &= ~bit;
- metag_out32(level, level_addr);
-#ifdef CONFIG_METAG_SUSPEND_MEM
- priv->levels_altered[meta_intc_bank(hw)] |= bit;
-#endif
- __global_unlock2(flags);
-
- return 0;
-}
-
-/**
- * meta_intc_irq_demux() - external irq de-multiplexer
- * @desc: the interrupt description structure for this irq
- *
- * The cpu receives an interrupt on TR2 when a SoC interrupt has occurred. It is
- * this function's job to demux this irq and figure out exactly which external
- * irq needs servicing.
- *
- * Whilst using TR2 to detect external interrupts is a software convention it is
- * (hopefully) unlikely to change.
- */
-static void meta_intc_irq_demux(struct irq_desc *desc)
-{
- struct meta_intc_priv *priv = &meta_intc_priv;
- irq_hw_number_t hw;
- unsigned int bank, irq_no, status;
- void __iomem *stat_addr = meta_intc_stat_addr(0);
-
- /*
- * Locate which interrupt has caused our handler to run.
- */
- for (bank = 0; bank < priv->nr_banks; ++bank) {
- /* Which interrupts are currently pending in this bank? */
-recalculate:
- status = metag_in32(stat_addr) & priv->unmasked[bank];
-
- for (hw = bank*32; status; status >>= 1, ++hw) {
- if (status & 0x1) {
- /*
- * Map the hardware IRQ number to a virtual
- * Linux IRQ number.
- */
- irq_no = irq_linear_revmap(priv->domain, hw);
-
- /*
- * Only fire off external interrupts that are
- * registered to be handled by the kernel.
- * Other external interrupts are probably being
- * handled by other Meta hardware threads.
- */
- generic_handle_irq(irq_no);
-
- /*
- * The handler may have re-enabled interrupts
- * which could have caused a nested invocation
- * of this code and make the copy of the
- * status register we are using invalid.
- */
- goto recalculate;
- }
- }
- stat_addr += HWSTAT_STRIDE;
- }
-}
-
-#ifdef CONFIG_SMP
-/**
- * meta_intc_set_affinity() - set the affinity for an interrupt
- * @data: data for the external irq to set the affinity of
- * @cpumask: cpu mask representing cpus which can handle the interrupt
- * @force: whether to force (ignored)
- *
- * Revector the specified external irq onto a specific cpu's TR2 trigger, so
- * that that cpu tends to be the one who handles it.
- */
-static int meta_intc_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask, bool force)
-{
- irq_hw_number_t hw = data->hwirq;
- void __iomem *vec_addr = meta_intc_vec_addr(hw);
- unsigned int cpu, thread;
-
- /*
- * Wire up this interrupt from HWVECxEXT to the Meta core.
- *
- * Note that we can't wire up HWVECxEXT to interrupt more than
- * one cpu (the interrupt code doesn't support it), so we just
- * pick the first cpu we find in 'cpumask'.
- */
- cpu = cpumask_any_and(cpumask, cpu_online_mask);
- thread = cpu_2_hwthread_id[cpu];
-
- metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr);
-
- irq_data_update_effective_affinity(data, cpumask_of(cpu));
-
- return 0;
-}
-#else
-#define meta_intc_set_affinity NULL
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-#define META_INTC_CHIP_FLAGS (IRQCHIP_MASK_ON_SUSPEND \
- | IRQCHIP_SKIP_SET_WAKE)
-#else
-#define META_INTC_CHIP_FLAGS 0
-#endif
-
-/* public edge/level irq chips which SoCs can override */
-
-struct irq_chip meta_intc_edge_chip = {
- .irq_startup = meta_intc_startup_irq,
- .irq_shutdown = meta_intc_shutdown_irq,
- .irq_ack = meta_intc_ack_irq,
- .irq_mask = meta_intc_mask_irq,
- .irq_unmask = meta_intc_unmask_irq,
- .irq_set_type = meta_intc_irq_set_type,
- .irq_set_affinity = meta_intc_set_affinity,
- .flags = META_INTC_CHIP_FLAGS,
-};
-
-struct irq_chip meta_intc_level_chip = {
- .irq_startup = meta_intc_startup_irq,
- .irq_shutdown = meta_intc_shutdown_irq,
- .irq_set_type = meta_intc_irq_set_type,
- .irq_mask = meta_intc_mask_irq,
- .irq_unmask = meta_intc_unmask_irq,
- .irq_set_affinity = meta_intc_set_affinity,
- .flags = META_INTC_CHIP_FLAGS,
-};
-
-/**
- * meta_intc_map() - map an external irq
- * @d: irq domain of external trigger block
- * @irq: virtual irq number
- * @hw: hardware irq number within external trigger block
- *
- * This sets up a virtual irq for a specified hardware interrupt. The irq chip
- * and handler is configured, using the HWLEVELEXT registers to determine
- * edge/level flow type. These registers will have been set when the irq type is
- * set (or set to a default at init time).
- */
-static int meta_intc_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
-{
- unsigned int bit = 1 << meta_intc_offset(hw);
- void __iomem *level_addr = meta_intc_level_addr(hw);
-
- /* Go by the current sense in the HWLEVELEXT register */
- if (metag_in32(level_addr) & bit)
- irq_set_chip_and_handler(irq, &meta_intc_level_chip,
- handle_level_irq);
- else
- irq_set_chip_and_handler(irq, &meta_intc_edge_chip,
- handle_edge_irq);
-
- irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq)));
- return 0;
-}
-
-static const struct irq_domain_ops meta_intc_domain_ops = {
- .map = meta_intc_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-#ifdef CONFIG_METAG_SUSPEND_MEM
-
-/**
- * struct meta_intc_context - suspend context
- * @levels: State of HWLEVELEXT registers
- * @masks: State of HWMASKEXT registers
- * @vectors: State of HWVECEXT registers
- * @txvecint: State of TxVECINT registers
- *
- * This structure stores the IRQ state across suspend.
- */
-struct meta_intc_context {
- u32 levels[4];
- u32 masks[4];
- u8 vectors[4*32];
-
- u8 txvecint[4][4];
-};
-
-/* suspend context */
-static struct meta_intc_context *meta_intc_context;
-
-/**
- * meta_intc_suspend() - store irq state
- *
- * To avoid interfering with other threads we only save the IRQ state of IRQs in
- * use by Linux.
- */
-static int meta_intc_suspend(void)
-{
- struct meta_intc_priv *priv = &meta_intc_priv;
- int i, j;
- irq_hw_number_t hw;
- unsigned int bank;
- unsigned long flags;
- struct meta_intc_context *context;
- void __iomem *level_addr, *mask_addr, *vec_addr;
- u32 mask, bit;
-
- context = kzalloc(sizeof(*context), GFP_ATOMIC);
- if (!context)
- return -ENOMEM;
-
- hw = 0;
- level_addr = meta_intc_level_addr(0);
- mask_addr = meta_intc_mask_addr(0);
- for (bank = 0; bank < priv->nr_banks; ++bank) {
- vec_addr = meta_intc_vec_addr(hw);
-
- /* create mask of interrupts in use */
- mask = 0;
- for (bit = 1; bit; bit <<= 1) {
- i = irq_linear_revmap(priv->domain, hw);
- /* save mapped irqs which are enabled or have actions */
- if (i && (!irqd_irq_disabled(irq_get_irq_data(i)) ||
- irq_has_action(i))) {
- mask |= bit;
-
- /* save trigger vector */
- context->vectors[hw] = metag_in32(vec_addr);
- }
-
- ++hw;
- vec_addr += HWVECnEXT_STRIDE;
- }
-
- /* save level state if any IRQ levels altered */
- if (priv->levels_altered[bank])
- context->levels[bank] = metag_in32(level_addr);
- /* save mask state if any IRQs in use */
- if (mask)
- context->masks[bank] = metag_in32(mask_addr);
-
- level_addr += HWSTAT_STRIDE;
- mask_addr += HWSTAT_STRIDE;
- }
-
- /* save trigger matrixing */
- __global_lock2(flags);
- for (i = 0; i < 4; ++i)
- for (j = 0; j < 4; ++j)
- context->txvecint[i][j] = metag_in32(T0VECINT_BHALT +
- TnVECINT_STRIDE*i +
- 8*j);
- __global_unlock2(flags);
-
- meta_intc_context = context;
- return 0;
-}
-
-/**
- * meta_intc_resume() - restore saved irq state
- *
- * Restore the saved IRQ state and drop it.
- */
-static void meta_intc_resume(void)
-{
- struct meta_intc_priv *priv = &meta_intc_priv;
- int i, j;
- irq_hw_number_t hw;
- unsigned int bank;
- unsigned long flags;
- struct meta_intc_context *context = meta_intc_context;
- void __iomem *level_addr, *mask_addr, *vec_addr;
- u32 mask, bit, tmp;
-
- meta_intc_context = NULL;
-
- hw = 0;
- level_addr = meta_intc_level_addr(0);
- mask_addr = meta_intc_mask_addr(0);
- for (bank = 0; bank < priv->nr_banks; ++bank) {
- vec_addr = meta_intc_vec_addr(hw);
-
- /* create mask of interrupts in use */
- mask = 0;
- for (bit = 1; bit; bit <<= 1) {
- i = irq_linear_revmap(priv->domain, hw);
- /* restore mapped irqs, enabled or with actions */
- if (i && (!irqd_irq_disabled(irq_get_irq_data(i)) ||
- irq_has_action(i))) {
- mask |= bit;
-
- /* restore trigger vector */
- metag_out32(context->vectors[hw], vec_addr);
- }
-
- ++hw;
- vec_addr += HWVECnEXT_STRIDE;
- }
-
- if (mask) {
- /* restore mask state */
- __global_lock2(flags);
- tmp = metag_in32(mask_addr);
- tmp = (tmp & ~mask) | (context->masks[bank] & mask);
- metag_out32(tmp, mask_addr);
- __global_unlock2(flags);
- }
-
- mask = priv->levels_altered[bank];
- if (mask) {
- /* restore level state */
- __global_lock2(flags);
- tmp = metag_in32(level_addr);
- tmp = (tmp & ~mask) | (context->levels[bank] & mask);
- metag_out32(tmp, level_addr);
- __global_unlock2(flags);
- }
-
- level_addr += HWSTAT_STRIDE;
- mask_addr += HWSTAT_STRIDE;
- }
-
- /* restore trigger matrixing */
- __global_lock2(flags);
- for (i = 0; i < 4; ++i) {
- for (j = 0; j < 4; ++j) {
- metag_out32(context->txvecint[i][j],
- T0VECINT_BHALT +
- TnVECINT_STRIDE*i +
- 8*j);
- }
- }
- __global_unlock2(flags);
-
- kfree(context);
-}
-
-static struct syscore_ops meta_intc_syscore_ops = {
- .suspend = meta_intc_suspend,
- .resume = meta_intc_resume,
-};
-
-static void __init meta_intc_init_syscore_ops(struct meta_intc_priv *priv)
-{
- register_syscore_ops(&meta_intc_syscore_ops);
-}
-#else
-#define meta_intc_init_syscore_ops(priv) do {} while (0)
-#endif
-
-/**
- * meta_intc_init_cpu() - register with a Meta cpu
- * @priv: private interrupt controller data
- * @cpu: the CPU to register on
- *
- * Configure @cpu's TR2 irq so that we can demux external irqs.
- */
-static void __init meta_intc_init_cpu(struct meta_intc_priv *priv, int cpu)
-{
- unsigned int thread = cpu_2_hwthread_id[cpu];
- unsigned int signum = TBID_SIGNUM_TR2(thread);
- int irq = tbisig_map(signum);
-
- /* Register the multiplexed IRQ handler */
- irq_set_chained_handler(irq, meta_intc_irq_demux);
- irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
-}
-
-/**
- * meta_intc_no_mask() - indicate lack of HWMASKEXT registers
- *
- * Called from SoC code (or init code below) to dynamically indicate the lack of
- * HWMASKEXT registers (for example depending on some SoC revision register).
- * This alters the irq mask and unmask callbacks to use the fallback
- * unvectoring/retriggering technique instead of using HWMASKEXT registers.
- */
-void __init meta_intc_no_mask(void)
-{
- meta_intc_edge_chip.irq_mask = meta_intc_mask_irq_nomask;
- meta_intc_edge_chip.irq_unmask = meta_intc_unmask_edge_irq_nomask;
- meta_intc_level_chip.irq_mask = meta_intc_mask_irq_nomask;
- meta_intc_level_chip.irq_unmask = meta_intc_unmask_level_irq_nomask;
-}
-
-/**
- * init_external_IRQ() - initialise the external irq controller
- *
- * Set up the external irq controller using device tree properties. This is
- * called from init_IRQ().
- */
-int __init init_external_IRQ(void)
-{
- struct meta_intc_priv *priv = &meta_intc_priv;
- struct device_node *node;
- int ret, cpu;
- u32 val;
- bool no_masks = false;
-
- node = of_find_compatible_node(NULL, NULL, "img,meta-intc");
- if (!node)
- return -ENOENT;
-
- /* Get number of banks */
- ret = of_property_read_u32(node, "num-banks", &val);
- if (ret) {
- pr_err("meta-intc: No num-banks property found\n");
- return ret;
- }
- if (val < 1 || val > 4) {
- pr_err("meta-intc: num-banks (%u) out of range\n", val);
- return -EINVAL;
- }
- priv->nr_banks = val;
-
- /* Are any mask registers present? */
- if (of_get_property(node, "no-mask", NULL))
- no_masks = true;
-
- /* No HWMASKEXT registers present? */
- if (no_masks)
- meta_intc_no_mask();
-
- /* Set up an IRQ domain */
- /*
- * This is a legacy IRQ domain for now until all the platform setup code
- * has been converted to devicetree.
- */
- priv->domain = irq_domain_add_linear(node, priv->nr_banks*32,
- &meta_intc_domain_ops, priv);
- if (unlikely(!priv->domain)) {
- pr_err("meta-intc: cannot add IRQ domain\n");
- return -ENOMEM;
- }
-
- /* Setup TR2 for all cpus. */
- for_each_possible_cpu(cpu)
- meta_intc_init_cpu(priv, cpu);
-
- /* Set up system suspend/resume callbacks */
- meta_intc_init_syscore_ops(priv);
-
- pr_info("meta-intc: External IRQ controller initialised (%u IRQs)\n",
- priv->nr_banks*32);
-
- return 0;
-}
diff --git a/drivers/irqchip/irq-metag.c b/drivers/irqchip/irq-metag.c
deleted file mode 100644
index 857b946747eb..000000000000
--- a/drivers/irqchip/irq-metag.c
+++ /dev/null
@@ -1,343 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Meta internal (HWSTATMETA) interrupt code.
- *
- * Copyright (C) 2011-2012 Imagination Technologies Ltd.
- *
- * This code is based on the code in SoC/common/irq.c and SoC/comet/irq.c
- * The code base could be generalised/merged as a lot of the functionality is
- * similar. Until this is done, we try to keep the code simple here.
- */
-
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irqdomain.h>
-
-#include <asm/irq.h>
-#include <asm/hwthread.h>
-
-#define PERF0VECINT 0x04820580
-#define PERF1VECINT 0x04820588
-#define PERF0TRIG_OFFSET 16
-#define PERF1TRIG_OFFSET 17
-
-/**
- * struct metag_internal_irq_priv - private meta internal interrupt data
- * @domain: IRQ domain for all internal Meta IRQs (HWSTATMETA)
- * @unmasked: Record of unmasked IRQs
- */
-struct metag_internal_irq_priv {
- struct irq_domain *domain;
-
- unsigned long unmasked;
-};
-
-/* Private data for the one and only internal interrupt controller */
-static struct metag_internal_irq_priv metag_internal_irq_priv;
-
-static unsigned int metag_internal_irq_startup(struct irq_data *data);
-static void metag_internal_irq_shutdown(struct irq_data *data);
-static void metag_internal_irq_ack(struct irq_data *data);
-static void metag_internal_irq_mask(struct irq_data *data);
-static void metag_internal_irq_unmask(struct irq_data *data);
-#ifdef CONFIG_SMP
-static int metag_internal_irq_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask, bool force);
-#endif
-
-static struct irq_chip internal_irq_edge_chip = {
- .name = "HWSTATMETA-IRQ",
- .irq_startup = metag_internal_irq_startup,
- .irq_shutdown = metag_internal_irq_shutdown,
- .irq_ack = metag_internal_irq_ack,
- .irq_mask = metag_internal_irq_mask,
- .irq_unmask = metag_internal_irq_unmask,
-#ifdef CONFIG_SMP
- .irq_set_affinity = metag_internal_irq_set_affinity,
-#endif
-};
-
-/*
- * metag_hwvec_addr - get the address of *VECINT regs of irq
- *
- * This function is a table of supported triggers on HWSTATMETA
- * Could do with a structure, but better keep it simple. Changes
- * in this code should be rare.
- */
-static inline void __iomem *metag_hwvec_addr(irq_hw_number_t hw)
-{
- void __iomem *addr;
-
- switch (hw) {
- case PERF0TRIG_OFFSET:
- addr = (void __iomem *)PERF0VECINT;
- break;
- case PERF1TRIG_OFFSET:
- addr = (void __iomem *)PERF1VECINT;
- break;
- default:
- addr = NULL;
- break;
- }
- return addr;
-}
-
-/*
- * metag_internal_startup - setup an internal irq
- * @irq: the irq to startup
- *
- * Multiplex interrupts for @irq onto TR1. Clear any pending
- * interrupts.
- */
-static unsigned int metag_internal_irq_startup(struct irq_data *data)
-{
- /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */
- metag_internal_irq_ack(data);
-
- /* Enable the interrupt by unmasking it */
- metag_internal_irq_unmask(data);
-
- return 0;
-}
-
-/*
- * metag_internal_irq_shutdown - turn off the irq
- * @irq: the irq number to turn off
- *
- * Mask @irq and clear any pending interrupts.
- * Stop muxing @irq onto TR1.
- */
-static void metag_internal_irq_shutdown(struct irq_data *data)
-{
- /* Disable the IRQ at the core by masking it. */
- metag_internal_irq_mask(data);
-
- /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */
- metag_internal_irq_ack(data);
-}
-
-/*
- * metag_internal_irq_ack - acknowledge irq
- * @irq: the irq to ack
- */
-static void metag_internal_irq_ack(struct irq_data *data)
-{
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << hw;
-
- if (metag_in32(HWSTATMETA) & bit)
- metag_out32(bit, HWSTATMETA);
-}
-
-/**
- * metag_internal_irq_mask() - mask an internal irq by unvectoring
- * @data: data for the internal irq to mask
- *
- * HWSTATMETA has no mask register. Instead the IRQ is unvectored from the core
- * and retriggered if necessary later.
- */
-static void metag_internal_irq_mask(struct irq_data *data)
-{
- struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
- irq_hw_number_t hw = data->hwirq;
- void __iomem *vec_addr = metag_hwvec_addr(hw);
-
- clear_bit(hw, &priv->unmasked);
-
- /* there is no interrupt mask, so unvector the interrupt */
- metag_out32(0, vec_addr);
-}
-
-/**
- * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring
- * @data: data for the internal irq to unmask
- *
- * HWSTATMETA has no mask register. Instead the IRQ is revectored back to the
- * core and retriggered if necessary.
- */
-static void metag_internal_irq_unmask(struct irq_data *data)
-{
- struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
- irq_hw_number_t hw = data->hwirq;
- unsigned int bit = 1 << hw;
- void __iomem *vec_addr = metag_hwvec_addr(hw);
- unsigned int thread = hard_processor_id();
-
- set_bit(hw, &priv->unmasked);
-
- /* there is no interrupt mask, so revector the interrupt */
- metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), vec_addr);
-
- /*
- * Re-trigger interrupt
- *
- * Writing a 1 toggles, and a 0->1 transition triggers. We only
- * retrigger if the status bit is already set, which means we
- * need to clear it first. Retriggering is fundamentally racy
- * because if the interrupt fires again after we clear it we
- * could end up clearing it again and the interrupt handler
- * thinking it hasn't fired. Therefore we need to keep trying to
- * retrigger until the bit is set.
- */
- if (metag_in32(HWSTATMETA) & bit) {
- metag_out32(bit, HWSTATMETA);
- while (!(metag_in32(HWSTATMETA) & bit))
- metag_out32(bit, HWSTATMETA);
- }
-}
-
-#ifdef CONFIG_SMP
-/*
- * metag_internal_irq_set_affinity - set the affinity for an interrupt
- */
-static int metag_internal_irq_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask, bool force)
-{
- unsigned int cpu, thread;
- irq_hw_number_t hw = data->hwirq;
- /*
- * Wire up this interrupt from *VECINT to the Meta core.
- *
- * Note that we can't wire up *VECINT to interrupt more than
- * one cpu (the interrupt code doesn't support it), so we just
- * pick the first cpu we find in 'cpumask'.
- */
- cpu = cpumask_any_and(cpumask, cpu_online_mask);
- thread = cpu_2_hwthread_id[cpu];
-
- metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)),
- metag_hwvec_addr(hw));
-
- return 0;
-}
-#endif
-
-/*
- * metag_internal_irq_demux - irq de-multiplexer
- * @irq: the interrupt number
- * @desc: the interrupt description structure for this irq
- *
- * The cpu receives an interrupt on TR1 when an interrupt has
- * occurred. It is this function's job to demux this irq and
- * figure out exactly which trigger needs servicing.
- */
-static void metag_internal_irq_demux(struct irq_desc *desc)
-{
- struct metag_internal_irq_priv *priv = irq_desc_get_handler_data(desc);
- irq_hw_number_t hw;
- unsigned int irq_no;
- u32 status;
-
-recalculate:
- status = metag_in32(HWSTATMETA) & priv->unmasked;
-
- for (hw = 0; status != 0; status >>= 1, ++hw) {
- if (status & 0x1) {
- /*
- * Map the hardware IRQ number to a virtual Linux IRQ
- * number.
- */
- irq_no = irq_linear_revmap(priv->domain, hw);
-
- /*
- * Only fire off interrupts that are
- * registered to be handled by the kernel.
- * Other interrupts are probably being
- * handled by other Meta hardware threads.
- */
- generic_handle_irq(irq_no);
-
- /*
- * The handler may have re-enabled interrupts
- * which could have caused a nested invocation
- * of this code and make the copy of the
- * status register we are using invalid.
- */
- goto recalculate;
- }
- }
-}
-
-/**
- * internal_irq_map() - Map an internal meta IRQ to a virtual IRQ number.
- * @hw: Number of the internal IRQ. Must be in range.
- *
- * Returns: The virtual IRQ number of the Meta internal IRQ specified by
- * @hw.
- */
-int internal_irq_map(unsigned int hw)
-{
- struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
- if (!priv->domain)
- return -ENODEV;
- return irq_create_mapping(priv->domain, hw);
-}
-
-/**
- * metag_internal_irq_init_cpu - regsister with the Meta cpu
- * @cpu: the CPU to register on
- *
- * Configure @cpu's TR1 irq so that we can demux irqs.
- */
-static void metag_internal_irq_init_cpu(struct metag_internal_irq_priv *priv,
- int cpu)
-{
- unsigned int thread = cpu_2_hwthread_id[cpu];
- unsigned int signum = TBID_SIGNUM_TR1(thread);
- int irq = tbisig_map(signum);
-
- /* Register the multiplexed IRQ handler */
- irq_set_chained_handler_and_data(irq, metag_internal_irq_demux, priv);
- irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
-}
-
-/**
- * metag_internal_intc_map() - map an internal irq
- * @d: irq domain of internal trigger block
- * @irq: virtual irq number
- * @hw: hardware irq number within internal trigger block
- *
- * This sets up a virtual irq for a specified hardware interrupt. The irq chip
- * and handler is configured.
- */
-static int metag_internal_intc_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
-{
- /* only register interrupt if it is mapped */
- if (!metag_hwvec_addr(hw))
- return -EINVAL;
-
- irq_set_chip_and_handler(irq, &internal_irq_edge_chip,
- handle_edge_irq);
- return 0;
-}
-
-static const struct irq_domain_ops metag_internal_intc_domain_ops = {
- .map = metag_internal_intc_map,
-};
-
-/**
- * metag_internal_irq_register - register internal IRQs
- *
- * Register the irq chip and handler function for all internal IRQs
- */
-int __init init_internal_IRQ(void)
-{
- struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
- unsigned int cpu;
-
- /* Set up an IRQ domain */
- priv->domain = irq_domain_add_linear(NULL, 32,
- &metag_internal_intc_domain_ops,
- priv);
- if (unlikely(!priv->domain)) {
- pr_err("meta-internal-intc: cannot add IRQ domain\n");
- return -ENOMEM;
- }
-
- /* Setup TR1 for all cpus. */
- for_each_possible_cpu(cpu)
- metag_internal_irq_init_cpu(priv, cpu);
-
- return 0;
-};
OpenPOWER on IntegriCloud