diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/hwmon/tmp401.c | 35 |
2 files changed, 30 insertions, 7 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index e0be99a4615c..be63b140a976 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1572,7 +1572,7 @@ config SENSORS_TMP401 depends on I2C help If you say yes here you get support for Texas Instruments TMP401, - TMP411, TMP431, TMP432 and TMP435 temperature sensor chips. + TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp401. diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index ccf4cffe0ee1..eeeed2c7d081 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -47,7 +47,7 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 }; +enum chips { tmp401, tmp411, tmp431, tmp432, tmp435, tmp461 }; /* * The TMP401 registers, note some registers have different addresses for @@ -62,31 +62,34 @@ enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 }; #define TMP401_MANUFACTURER_ID_REG 0xFE #define TMP401_DEVICE_ID_REG 0xFF -static const u8 TMP401_TEMP_MSB_READ[6][2] = { +static const u8 TMP401_TEMP_MSB_READ[7][2] = { { 0x00, 0x01 }, /* temp */ { 0x06, 0x08 }, /* low limit */ { 0x05, 0x07 }, /* high limit */ { 0x20, 0x19 }, /* therm (crit) limit */ { 0x30, 0x34 }, /* lowest */ { 0x32, 0x36 }, /* highest */ + { 0, 0x11 }, /* offset */ }; -static const u8 TMP401_TEMP_MSB_WRITE[6][2] = { +static const u8 TMP401_TEMP_MSB_WRITE[7][2] = { { 0, 0 }, /* temp (unused) */ { 0x0C, 0x0E }, /* low limit */ { 0x0B, 0x0D }, /* high limit */ { 0x20, 0x19 }, /* therm (crit) limit */ { 0x30, 0x34 }, /* lowest */ { 0x32, 0x36 }, /* highest */ + { 0, 0x11 }, /* offset */ }; -static const u8 TMP401_TEMP_LSB[6][2] = { +static const u8 TMP401_TEMP_LSB[7][2] = { { 0x15, 0x10 }, /* temp */ { 0x17, 0x14 }, /* low limit */ { 0x16, 0x13 }, /* high limit */ { 0, 0 }, /* therm (crit) limit (unused) */ { 0x31, 0x35 }, /* lowest */ { 0x33, 0x37 }, /* highest */ + { 0, 0x12 }, /* offset */ }; static const u8 TMP432_TEMP_MSB_READ[4][3] = { @@ -149,6 +152,7 @@ static const struct i2c_device_id tmp401_id[] = { { "tmp431", tmp431 }, { "tmp432", tmp432 }, { "tmp435", tmp435 }, + { "tmp461", tmp461 }, { } }; MODULE_DEVICE_TABLE(i2c, tmp401_id); @@ -170,7 +174,7 @@ struct tmp401_data { /* register values */ u8 status[4]; u8 config; - u16 temp[6][3]; + u16 temp[7][3]; u8 temp_crit_hyst; }; @@ -613,6 +617,22 @@ static const struct attribute_group tmp432_group = { }; /* + * Additional features of the TMP461 chip. + * The TMP461 temperature offset for the remote channel. + */ +static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp, + store_temp, 6, 1); + +static struct attribute *tmp461_attributes[] = { + &sensor_dev_attr_temp2_offset.dev_attr.attr, + NULL +}; + +static const struct attribute_group tmp461_group = { + .attrs = tmp461_attributes, +}; + +/* * Begin non sysfs callback code (aka Real code) */ @@ -714,7 +734,7 @@ static int tmp401_probe(struct i2c_client *client, const struct i2c_device_id *id) { static const char * const names[] = { - "TMP401", "TMP411", "TMP431", "TMP432", "TMP435" + "TMP401", "TMP411", "TMP431", "TMP432", "TMP435", "TMP461" }; struct device *dev = &client->dev; struct device *hwmon_dev; @@ -745,6 +765,9 @@ static int tmp401_probe(struct i2c_client *client, if (data->kind == tmp432) data->groups[groups++] = &tmp432_group; + if (data->kind == tmp461) + data->groups[groups++] = &tmp461_group; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, data->groups); if (IS_ERR(hwmon_dev)) |
