diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_cmd_parser.c')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_cmd_parser.c | 174 |
1 files changed, 110 insertions, 64 deletions
diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index f5039f4f988f..21b1cd917d81 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -86,6 +86,102 @@ * general bitmasking mechanism. */ +/* + * A command that requires special handling by the command parser. + */ +struct drm_i915_cmd_descriptor { + /* + * Flags describing how the command parser processes the command. + * + * CMD_DESC_FIXED: The command has a fixed length if this is set, + * a length mask if not set + * CMD_DESC_SKIP: The command is allowed but does not follow the + * standard length encoding for the opcode range in + * which it falls + * CMD_DESC_REJECT: The command is never allowed + * CMD_DESC_REGISTER: The command should be checked against the + * register whitelist for the appropriate ring + * CMD_DESC_MASTER: The command is allowed if the submitting process + * is the DRM master + */ + u32 flags; +#define CMD_DESC_FIXED (1<<0) +#define CMD_DESC_SKIP (1<<1) +#define CMD_DESC_REJECT (1<<2) +#define CMD_DESC_REGISTER (1<<3) +#define CMD_DESC_BITMASK (1<<4) +#define CMD_DESC_MASTER (1<<5) + + /* + * The command's unique identification bits and the bitmask to get them. + * This isn't strictly the opcode field as defined in the spec and may + * also include type, subtype, and/or subop fields. + */ + struct { + u32 value; + u32 mask; + } cmd; + + /* + * The command's length. The command is either fixed length (i.e. does + * not include a length field) or has a length field mask. The flag + * CMD_DESC_FIXED indicates a fixed length. Otherwise, the command has + * a length mask. All command entries in a command table must include + * length information. + */ + union { + u32 fixed; + u32 mask; + } length; + + /* + * Describes where to find a register address in the command to check + * against the ring's register whitelist. Only valid if flags has the + * CMD_DESC_REGISTER bit set. + * + * A non-zero step value implies that the command may access multiple + * registers in sequence (e.g. LRI), in that case step gives the + * distance in dwords between individual offset fields. + */ + struct { + u32 offset; + u32 mask; + u32 step; + } reg; + +#define MAX_CMD_DESC_BITMASKS 3 + /* + * Describes command checks where a particular dword is masked and + * compared against an expected value. If the command does not match + * the expected value, the parser rejects it. Only valid if flags has + * the CMD_DESC_BITMASK bit set. Only entries where mask is non-zero + * are valid. + * + * If the check specifies a non-zero condition_mask then the parser + * only performs the check when the bits specified by condition_mask + * are non-zero. + */ + struct { + u32 offset; + u32 mask; + u32 expected; + u32 condition_offset; + u32 condition_mask; + } bits[MAX_CMD_DESC_BITMASKS]; +}; + +/* + * A table of commands requiring special handling by the command parser. + * + * Each engine has an array of tables. Each table consists of an array of + * command descriptors, which must be sorted with command opcodes in + * ascending order. + */ +struct drm_i915_cmd_table { + const struct drm_i915_cmd_descriptor *table; + int count; +}; + #define STD_MI_OPCODE_SHIFT (32 - 9) #define STD_3D_OPCODE_SHIFT (32 - 16) #define STD_2D_OPCODE_SHIFT (32 - 10) @@ -450,7 +546,6 @@ static const struct drm_i915_reg_descriptor gen7_render_regs[] = { REG64(PS_INVOCATION_COUNT), REG64(PS_DEPTH_COUNT), REG64_IDX(RING_TIMESTAMP, RENDER_RING_BASE), - REG32(OACONTROL), /* Only allowed for LRI and SRM. See below. */ REG64(MI_PREDICATE_SRC0), REG64(MI_PREDICATE_SRC1), REG32(GEN7_3DPRIM_END_OFFSET), @@ -559,7 +654,7 @@ static const struct drm_i915_reg_table hsw_blt_reg_tables[] = { static u32 gen7_render_get_cmd_length_mask(u32 cmd_header) { - u32 client = (cmd_header & INSTR_CLIENT_MASK) >> INSTR_CLIENT_SHIFT; + u32 client = cmd_header >> INSTR_CLIENT_SHIFT; u32 subclient = (cmd_header & INSTR_SUBCLIENT_MASK) >> INSTR_SUBCLIENT_SHIFT; @@ -578,7 +673,7 @@ static u32 gen7_render_get_cmd_length_mask(u32 cmd_header) static u32 gen7_bsd_get_cmd_length_mask(u32 cmd_header) { - u32 client = (cmd_header & INSTR_CLIENT_MASK) >> INSTR_CLIENT_SHIFT; + u32 client = cmd_header >> INSTR_CLIENT_SHIFT; u32 subclient = (cmd_header & INSTR_SUBCLIENT_MASK) >> INSTR_SUBCLIENT_SHIFT; u32 op = (cmd_header & INSTR_26_TO_24_MASK) >> INSTR_26_TO_24_SHIFT; @@ -601,7 +696,7 @@ static u32 gen7_bsd_get_cmd_length_mask(u32 cmd_header) static u32 gen7_blt_get_cmd_length_mask(u32 cmd_header) { - u32 client = (cmd_header & INSTR_CLIENT_MASK) >> INSTR_CLIENT_SHIFT; + u32 client = cmd_header >> INSTR_CLIENT_SHIFT; if (client == INSTR_MI_CLIENT) return 0x3F; @@ -984,7 +1079,7 @@ static u32 *copy_batch(struct drm_i915_gem_object *dst_obj, src = ERR_PTR(-ENODEV); if (src_needs_clflush && - i915_memcpy_from_wc((void *)(uintptr_t)batch_start_offset, NULL, 0)) { + i915_can_memcpy_from_wc(NULL, batch_start_offset, 0)) { src = i915_gem_object_pin_map(src_obj, I915_MAP_WC); if (!IS_ERR(src)) { i915_memcpy_from_wc(dst, @@ -1036,32 +1131,10 @@ unpin_src: return dst; } -/** - * intel_engine_needs_cmd_parser() - should a given engine use software - * command parsing? - * @engine: the engine in question - * - * Only certain platforms require software batch buffer command parsing, and - * only when enabled via module parameter. - * - * Return: true if the engine requires software command parsing - */ -bool intel_engine_needs_cmd_parser(struct intel_engine_cs *engine) -{ - if (!engine->needs_cmd_parser) - return false; - - if (!USES_PPGTT(engine->i915)) - return false; - - return (i915.enable_cmd_parser == 1); -} - static bool check_cmd(const struct intel_engine_cs *engine, const struct drm_i915_cmd_descriptor *desc, const u32 *cmd, u32 length, - const bool is_master, - bool *oacontrol_set) + const bool is_master) { if (desc->flags & CMD_DESC_SKIP) return true; @@ -1099,31 +1172,6 @@ static bool check_cmd(const struct intel_engine_cs *engine, } /* - * OACONTROL requires some special handling for - * writes. We want to make sure that any batch which - * enables OA also disables it before the end of the - * batch. The goal is to prevent one process from - * snooping on the perf data from another process. To do - * that, we need to check the value that will be written - * to the register. Hence, limit OACONTROL writes to - * only MI_LOAD_REGISTER_IMM commands. - */ - if (reg_addr == i915_mmio_reg_offset(OACONTROL)) { - if (desc->cmd.value == MI_LOAD_REGISTER_MEM) { - DRM_DEBUG_DRIVER("CMD: Rejected LRM to OACONTROL\n"); - return false; - } - - if (desc->cmd.value == MI_LOAD_REGISTER_REG) { - DRM_DEBUG_DRIVER("CMD: Rejected LRR to OACONTROL\n"); - return false; - } - - if (desc->cmd.value == MI_LOAD_REGISTER_IMM(1)) - *oacontrol_set = (cmd[offset + 1] != 0); - } - - /* * Check the value written to the register against the * allowed mask/value pair given in the whitelist entry. */ @@ -1214,7 +1262,6 @@ int intel_engine_cmd_parser(struct intel_engine_cs *engine, u32 *cmd, *batch_end; struct drm_i915_cmd_descriptor default_desc = noop_desc; const struct drm_i915_cmd_descriptor *desc = &default_desc; - bool oacontrol_set = false; /* OACONTROL tracking. See check_cmd() */ bool needs_clflush_after = false; int ret = 0; @@ -1270,20 +1317,14 @@ int intel_engine_cmd_parser(struct intel_engine_cs *engine, break; } - if (!check_cmd(engine, desc, cmd, length, is_master, - &oacontrol_set)) { - ret = -EINVAL; + if (!check_cmd(engine, desc, cmd, length, is_master)) { + ret = -EACCES; break; } cmd += length; } - if (oacontrol_set) { - DRM_DEBUG_DRIVER("CMD: batch set OACONTROL but did not clear it\n"); - ret = -EINVAL; - } - if (cmd >= batch_end) { DRM_DEBUG_DRIVER("CMD: Got to the end of the buffer w/o a BBE cmd!\n"); ret = -EINVAL; @@ -1313,7 +1354,7 @@ int i915_cmd_parser_get_version(struct drm_i915_private *dev_priv) /* If the command parser is not enabled, report 0 - unsupported */ for_each_engine(engine, dev_priv, id) { - if (intel_engine_needs_cmd_parser(engine)) { + if (engine->needs_cmd_parser) { active = true; break; } @@ -1333,6 +1374,11 @@ int i915_cmd_parser_get_version(struct drm_i915_private *dev_priv) * 5. GPGPU dispatch compute indirect registers. * 6. TIMESTAMP register and Haswell CS GPR registers * 7. Allow MI_LOAD_REGISTER_REG between whitelisted registers. + * 8. Don't report cmd_check() failures as EINVAL errors to userspace; + * rely on the HW to NOOP disallowed commands as it would without + * the parser enabled. + * 9. Don't whitelist or handle oacontrol specially, as ownership + * for oacontrol state is moving to i915-perf. */ - return 7; + return 9; } |
