diff options
Diffstat (limited to 'drivers/cpufreq/cpufreq-dt.c')
-rw-r--r-- | drivers/cpufreq/cpufreq-dt.c | 300 |
1 files changed, 105 insertions, 195 deletions
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 0ca74d070058..f951f911786e 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -31,9 +31,8 @@ struct private_data { struct device *cpu_dev; - struct regulator *cpu_reg; struct thermal_cooling_device *cdev; - unsigned int voltage_tolerance; /* in percentage */ + const char *reg_name; }; static struct freq_attr *cpufreq_dt_attr[] = { @@ -44,175 +43,128 @@ static struct freq_attr *cpufreq_dt_attr[] = { static int set_target(struct cpufreq_policy *policy, unsigned int index) { - struct dev_pm_opp *opp; - struct cpufreq_frequency_table *freq_table = policy->freq_table; - struct clk *cpu_clk = policy->clk; struct private_data *priv = policy->driver_data; - struct device *cpu_dev = priv->cpu_dev; - struct regulator *cpu_reg = priv->cpu_reg; - unsigned long volt = 0, tol = 0; - int volt_old = 0; - unsigned int old_freq, new_freq; - long freq_Hz, freq_exact; - int ret; - - freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); - if (freq_Hz <= 0) - freq_Hz = freq_table[index].frequency * 1000; - freq_exact = freq_Hz; - new_freq = freq_Hz / 1000; - old_freq = clk_get_rate(cpu_clk) / 1000; + return dev_pm_opp_set_rate(priv->cpu_dev, + policy->freq_table[index].frequency * 1000); +} - if (!IS_ERR(cpu_reg)) { - unsigned long opp_freq; +/* + * An earlier version of opp-v1 bindings used to name the regulator + * "cpu0-supply", we still need to handle that for backwards compatibility. + */ +static const char *find_supply_name(struct device *dev) +{ + struct device_node *np; + struct property *pp; + int cpu = dev->id; + const char *name = NULL; - rcu_read_lock(); - opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(cpu_dev, "failed to find OPP for %ld\n", - freq_Hz); - return PTR_ERR(opp); - } - volt = dev_pm_opp_get_voltage(opp); - opp_freq = dev_pm_opp_get_freq(opp); - rcu_read_unlock(); - tol = volt * priv->voltage_tolerance / 100; - volt_old = regulator_get_voltage(cpu_reg); - dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n", - opp_freq / 1000, volt); - } + np = of_node_get(dev->of_node); - dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n", - old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1, - new_freq / 1000, volt ? volt / 1000 : -1); + /* This must be valid for sure */ + if (WARN_ON(!np)) + return NULL; - /* scaling up? scale voltage before frequency */ - if (!IS_ERR(cpu_reg) && new_freq > old_freq) { - ret = regulator_set_voltage_tol(cpu_reg, volt, tol); - if (ret) { - dev_err(cpu_dev, "failed to scale voltage up: %d\n", - ret); - return ret; + /* Try "cpu0" for older DTs */ + if (!cpu) { + pp = of_find_property(np, "cpu0-supply", NULL); + if (pp) { + name = "cpu0"; + goto node_put; } } - ret = clk_set_rate(cpu_clk, freq_exact); - if (ret) { - dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); - if (!IS_ERR(cpu_reg) && volt_old > 0) - regulator_set_voltage_tol(cpu_reg, volt_old, tol); - return ret; + pp = of_find_property(np, "cpu-supply", NULL); + if (pp) { + name = "cpu"; + goto node_put; } - /* scaling down? scale voltage after frequency */ - if (!IS_ERR(cpu_reg) && new_freq < old_freq) { - ret = regulator_set_voltage_tol(cpu_reg, volt, tol); - if (ret) { - dev_err(cpu_dev, "failed to scale voltage down: %d\n", - ret); - clk_set_rate(cpu_clk, old_freq * 1000); - } - } - - return ret; + dev_dbg(dev, "no regulator for cpu%d\n", cpu); +node_put: + of_node_put(np); + return name; } -static int allocate_resources(int cpu, struct device **cdev, - struct regulator **creg, struct clk **cclk) +static int resources_available(void) { struct device *cpu_dev; struct regulator *cpu_reg; struct clk *cpu_clk; int ret = 0; - char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg; + const char *name; - cpu_dev = get_cpu_device(cpu); + cpu_dev = get_cpu_device(0); if (!cpu_dev) { - pr_err("failed to get cpu%d device\n", cpu); + pr_err("failed to get cpu0 device\n"); return -ENODEV; } - /* Try "cpu0" for older DTs */ - if (!cpu) - reg = reg_cpu0; - else - reg = reg_cpu; - -try_again: - cpu_reg = regulator_get_optional(cpu_dev, reg); - ret = PTR_ERR_OR_ZERO(cpu_reg); + cpu_clk = clk_get(cpu_dev, NULL); + ret = PTR_ERR_OR_ZERO(cpu_clk); if (ret) { /* - * If cpu's regulator supply node is present, but regulator is - * not yet registered, we should try defering probe. + * If cpu's clk node is present, but clock is not yet + * registered, we should try defering probe. */ - if (ret == -EPROBE_DEFER) { - dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n", - cpu); - return ret; - } - - /* Try with "cpu-supply" */ - if (reg == reg_cpu0) { - reg = reg_cpu; - goto try_again; - } + if (ret == -EPROBE_DEFER) + dev_dbg(cpu_dev, "clock not ready, retry\n"); + else + dev_err(cpu_dev, "failed to get clock: %d\n", ret); - dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret); + return ret; } - cpu_clk = clk_get(cpu_dev, NULL); - ret = PTR_ERR_OR_ZERO(cpu_clk); - if (ret) { - /* put regulator */ - if (!IS_ERR(cpu_reg)) - regulator_put(cpu_reg); + clk_put(cpu_clk); + name = find_supply_name(cpu_dev); + /* Platform doesn't require regulator */ + if (!name) + return 0; + + cpu_reg = regulator_get_optional(cpu_dev, name); + ret = PTR_ERR_OR_ZERO(cpu_reg); + if (ret) { /* - * If cpu's clk node is present, but clock is not yet - * registered, we should try defering probe. + * If cpu's regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. */ if (ret == -EPROBE_DEFER) - dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu); + dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n"); else - dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu, - ret); - } else { - *cdev = cpu_dev; - *creg = cpu_reg; - *cclk = cpu_clk; + dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret); + + return ret; } - return ret; + regulator_put(cpu_reg); + return 0; } static int cpufreq_init(struct cpufreq_policy *policy) { struct cpufreq_frequency_table *freq_table; - struct device_node *np; struct private_data *priv; struct device *cpu_dev; - struct regulator *cpu_reg; struct clk *cpu_clk; struct dev_pm_opp *suspend_opp; - unsigned long min_uV = ~0, max_uV = 0; unsigned int transition_latency; - bool need_update = false; + bool opp_v1 = false; + const char *name; int ret; - ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); - if (ret) { - pr_err("%s: Failed to allocate resources: %d\n", __func__, ret); - return ret; + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", policy->cpu); + return -ENODEV; } - np = of_node_get(cpu_dev->of_node); - if (!np) { - dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu); - ret = -ENOENT; - goto out_put_reg_clk; + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret); + return ret; } /* Get OPP-sharing information from "operating-points-v2" bindings */ @@ -223,9 +175,23 @@ static int cpufreq_init(struct cpufreq_policy *policy) * finding shared-OPPs for backward compatibility. */ if (ret == -ENOENT) - need_update = true; + opp_v1 = true; else - goto out_node_put; + goto out_put_clk; + } + + /* + * OPP layer will be taking care of regulators now, but it needs to know + * the name of the regulator first. + */ + name = find_supply_name(cpu_dev); + if (name) { + ret = dev_pm_opp_set_regulator(cpu_dev, name); + if (ret) { + dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n", + policy->cpu, ret); + goto out_put_clk; + } } /* @@ -246,12 +212,12 @@ static int cpufreq_init(struct cpufreq_policy *policy) */ ret = dev_pm_opp_get_opp_count(cpu_dev); if (ret <= 0) { - pr_debug("OPP table is not ready, deferring probe\n"); + dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); ret = -EPROBE_DEFER; goto out_free_opp; } - if (need_update) { + if (opp_v1) { struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data(); if (!pd || !pd->independent_clocks) @@ -265,10 +231,6 @@ static int cpufreq_init(struct cpufreq_policy *policy) if (ret) dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret); - - of_property_read_u32(np, "clock-latency", &transition_latency); - } else { - transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev); } priv = kzalloc(sizeof(*priv), GFP_KERNEL); @@ -277,62 +239,16 @@ static int cpufreq_init(struct cpufreq_policy *policy) goto out_free_opp; } - of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance); - - if (!transition_latency) - transition_latency = CPUFREQ_ETERNAL; - - if (!IS_ERR(cpu_reg)) { - unsigned long opp_freq = 0; - - /* - * Disable any OPPs where the connected regulator isn't able to - * provide the specified voltage and record minimum and maximum - * voltage levels. - */ - while (1) { - struct dev_pm_opp *opp; - unsigned long opp_uV, tol_uV; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - break; - } - opp_uV = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - tol_uV = opp_uV * priv->voltage_tolerance / 100; - if (regulator_is_supported_voltage(cpu_reg, - opp_uV - tol_uV, - opp_uV + tol_uV)) { - if (opp_uV < min_uV) - min_uV = opp_uV; - if (opp_uV > max_uV) - max_uV = opp_uV; - } else { - dev_pm_opp_disable(cpu_dev, opp_freq); - } - - opp_freq++; - } - - ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); - if (ret > 0) - transition_latency += ret * 1000; - } + priv->reg_name = name; ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { - pr_err("failed to init cpufreq table: %d\n", ret); + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); goto out_free_priv; } priv->cpu_dev = cpu_dev; - priv->cpu_reg = cpu_reg; policy->driver_data = priv; - policy->clk = cpu_clk; rcu_read_lock(); @@ -357,9 +273,11 @@ static int cpufreq_init(struct cpufreq_policy *policy) cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs; } - policy->cpuinfo.transition_latency = transition_latency; + transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev); + if (!transition_latency) + transition_latency = CPUFREQ_ETERNAL; - of_node_put(np); + policy->cpuinfo.transition_latency = transition_latency; return 0; @@ -369,12 +287,10 @@ out_free_priv: kfree(priv); out_free_opp: dev_pm_opp_of_cpumask_remove_table(policy->cpus); -out_node_put: - of_node_put(np); -out_put_reg_clk: + if (name) + dev_pm_opp_put_regulator(cpu_dev); +out_put_clk: clk_put(cpu_clk); - if (!IS_ERR(cpu_reg)) - regulator_put(cpu_reg); return ret; } @@ -386,9 +302,10 @@ static int cpufreq_exit(struct cpufreq_policy *policy) cpufreq_cooling_unregister(priv->cdev); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); + if (priv->reg_name) + dev_pm_opp_put_regulator(priv->cpu_dev); + clk_put(policy->clk); - if (!IS_ERR(priv->cpu_reg)) - regulator_put(priv->cpu_reg); kfree(priv); return 0; @@ -441,9 +358,6 @@ static struct cpufreq_driver dt_cpufreq_driver = { static int dt_cpufreq_probe(struct platform_device *pdev) { - struct device *cpu_dev; - struct regulator *cpu_reg; - struct clk *cpu_clk; int ret; /* @@ -453,19 +367,15 @@ static int dt_cpufreq_probe(struct platform_device *pdev) * * FIXME: Is checking this only for CPU0 sufficient ? */ - ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk); + ret = resources_available(); if (ret) return ret; - clk_put(cpu_clk); - if (!IS_ERR(cpu_reg)) - regulator_put(cpu_reg); - dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev); ret = cpufreq_register_driver(&dt_cpufreq_driver); if (ret) - dev_err(cpu_dev, "failed register driver: %d\n", ret); + dev_err(&pdev->dev, "failed register driver: %d\n", ret); return ret; } |