diff options
Diffstat (limited to 'drivers/char/mwave')
| -rw-r--r-- | drivers/char/mwave/3780i.c | 727 | ||||
| -rw-r--r-- | drivers/char/mwave/3780i.h | 362 | ||||
| -rw-r--r-- | drivers/char/mwave/Makefile | 15 | ||||
| -rw-r--r-- | drivers/char/mwave/README | 50 | ||||
| -rw-r--r-- | drivers/char/mwave/mwavedd.c | 674 | ||||
| -rw-r--r-- | drivers/char/mwave/mwavedd.h | 150 | ||||
| -rw-r--r-- | drivers/char/mwave/mwavepub.h | 89 | ||||
| -rw-r--r-- | drivers/char/mwave/smapi.c | 570 | ||||
| -rw-r--r-- | drivers/char/mwave/smapi.h | 80 | ||||
| -rw-r--r-- | drivers/char/mwave/tp3780i.c | 592 | ||||
| -rw-r--r-- | drivers/char/mwave/tp3780i.h | 103 |
11 files changed, 3412 insertions, 0 deletions
diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c new file mode 100644 index 000000000000..ab00f51475df --- /dev/null +++ b/drivers/char/mwave/3780i.c @@ -0,0 +1,727 @@ +/* +* +* 3780i.c -- helper routines for the 3780i DSP +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/unistd.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/irq.h> +#include "smapi.h" +#include "mwavedd.h" +#include "3780i.h" + +static DEFINE_SPINLOCK(dsp_lock); +static unsigned long flags; + + +static void PaceMsaAccess(unsigned short usDspBaseIO) +{ + cond_resched(); + udelay(100); + cond_resched(); +} + +unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO, + unsigned long ulMsaAddr) +{ + unsigned short val; + + PRINTK_3(TRACE_3780I, + "3780i::dsp3780I_ReadMsaCfg entry usDspBaseIO %x ulMsaAddr %lx\n", + usDspBaseIO, ulMsaAddr); + + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16)); + val = InWordDsp(DSP_MsaDataDSISHigh); + spin_unlock_irqrestore(&dsp_lock, flags); + + PRINTK_2(TRACE_3780I, "3780i::dsp3780I_ReadMsaCfg exit val %x\n", val); + + return val; +} + +void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO, + unsigned long ulMsaAddr, unsigned short usValue) +{ + + PRINTK_4(TRACE_3780I, + "3780i::dsp3780i_WriteMsaCfg entry usDspBaseIO %x ulMsaAddr %lx usValue %x\n", + usDspBaseIO, ulMsaAddr, usValue); + + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16)); + OutWordDsp(DSP_MsaDataDSISHigh, usValue); + spin_unlock_irqrestore(&dsp_lock, flags); +} + +void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex, + unsigned char ucValue) +{ + DSP_ISA_SLAVE_CONTROL rSlaveControl; + DSP_ISA_SLAVE_CONTROL rSlaveControl_Save; + + + PRINTK_4(TRACE_3780I, + "3780i::dsp3780i_WriteGenCfg entry usDspBaseIO %x uIndex %x ucValue %x\n", + usDspBaseIO, uIndex, ucValue); + + MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl); + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_WriteGenCfg rSlaveControl %x\n", + MKBYTE(rSlaveControl)); + + rSlaveControl_Save = rSlaveControl; + rSlaveControl.ConfigMode = TRUE; + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_WriteGenCfg entry rSlaveControl+ConfigMode %x\n", + MKBYTE(rSlaveControl)); + + OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl)); + OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex); + OutByteDsp(DSP_ConfigData, ucValue); + OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save)); + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_WriteGenCfg exit\n"); + + +} + +unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO, + unsigned uIndex) +{ + DSP_ISA_SLAVE_CONTROL rSlaveControl; + DSP_ISA_SLAVE_CONTROL rSlaveControl_Save; + unsigned char ucValue; + + + PRINTK_3(TRACE_3780I, + "3780i::dsp3780i_ReadGenCfg entry usDspBaseIO %x uIndex %x\n", + usDspBaseIO, uIndex); + + MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl); + rSlaveControl_Save = rSlaveControl; + rSlaveControl.ConfigMode = TRUE; + OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl)); + OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex); + ucValue = InByteDsp(DSP_ConfigData); + OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save)); + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_ReadGenCfg exit ucValue %x\n", ucValue); + + + return ucValue; +} + +int dsp3780I_EnableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings, + unsigned short *pIrqMap, + unsigned short *pDmaMap) +{ + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + int i; + DSP_UART_CFG_1 rUartCfg1; + DSP_UART_CFG_2 rUartCfg2; + DSP_HBRIDGE_CFG_1 rHBridgeCfg1; + DSP_HBRIDGE_CFG_2 rHBridgeCfg2; + DSP_BUSMASTER_CFG_1 rBusmasterCfg1; + DSP_BUSMASTER_CFG_2 rBusmasterCfg2; + DSP_ISA_PROT_CFG rIsaProtCfg; + DSP_POWER_MGMT_CFG rPowerMgmtCfg; + DSP_HBUS_TIMER_CFG rHBusTimerCfg; + DSP_LBUS_TIMEOUT_DISABLE rLBusTimeoutDisable; + DSP_CHIP_RESET rChipReset; + DSP_CLOCK_CONTROL_1 rClockControl1; + DSP_CLOCK_CONTROL_2 rClockControl2; + DSP_ISA_SLAVE_CONTROL rSlaveControl; + DSP_HBRIDGE_CONTROL rHBridgeControl; + unsigned short ChipID = 0; + unsigned short tval; + + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780I_EnableDSP entry pSettings->bDSPEnabled %x\n", + pSettings->bDSPEnabled); + + + if (!pSettings->bDSPEnabled) { + PRINTK_ERROR( KERN_ERR "3780i::dsp3780I_EnableDSP: Error: DSP not enabled. Aborting.\n" ); + return -EIO; + } + + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_EnableDSP entry pSettings->bModemEnabled %x\n", + pSettings->bModemEnabled); + + if (pSettings->bModemEnabled) { + rUartCfg1.Reserved = rUartCfg2.Reserved = 0; + rUartCfg1.IrqActiveLow = pSettings->bUartIrqActiveLow; + rUartCfg1.IrqPulse = pSettings->bUartIrqPulse; + rUartCfg1.Irq = + (unsigned char) pIrqMap[pSettings->usUartIrq]; + switch (pSettings->usUartBaseIO) { + case 0x03F8: + rUartCfg1.BaseIO = 0; + break; + case 0x02F8: + rUartCfg1.BaseIO = 1; + break; + case 0x03E8: + rUartCfg1.BaseIO = 2; + break; + case 0x02E8: + rUartCfg1.BaseIO = 3; + break; + } + rUartCfg2.Enable = TRUE; + } + + rHBridgeCfg1.Reserved = rHBridgeCfg2.Reserved = 0; + rHBridgeCfg1.IrqActiveLow = pSettings->bDspIrqActiveLow; + rHBridgeCfg1.IrqPulse = pSettings->bDspIrqPulse; + rHBridgeCfg1.Irq = (unsigned char) pIrqMap[pSettings->usDspIrq]; + rHBridgeCfg1.AccessMode = 1; + rHBridgeCfg2.Enable = TRUE; + + + rBusmasterCfg2.Reserved = 0; + rBusmasterCfg1.Dma = (unsigned char) pDmaMap[pSettings->usDspDma]; + rBusmasterCfg1.NumTransfers = + (unsigned char) pSettings->usNumTransfers; + rBusmasterCfg1.ReRequest = (unsigned char) pSettings->usReRequest; + rBusmasterCfg1.MEMCS16 = pSettings->bEnableMEMCS16; + rBusmasterCfg2.IsaMemCmdWidth = + (unsigned char) pSettings->usIsaMemCmdWidth; + + + rIsaProtCfg.Reserved = 0; + rIsaProtCfg.GateIOCHRDY = pSettings->bGateIOCHRDY; + + rPowerMgmtCfg.Reserved = 0; + rPowerMgmtCfg.Enable = pSettings->bEnablePwrMgmt; + + rHBusTimerCfg.LoadValue = + (unsigned char) pSettings->usHBusTimerLoadValue; + + rLBusTimeoutDisable.Reserved = 0; + rLBusTimeoutDisable.DisableTimeout = + pSettings->bDisableLBusTimeout; + + MKWORD(rChipReset) = ~pSettings->usChipletEnable; + + rClockControl1.Reserved1 = rClockControl1.Reserved2 = 0; + rClockControl1.N_Divisor = pSettings->usN_Divisor; + rClockControl1.M_Multiplier = pSettings->usM_Multiplier; + + rClockControl2.Reserved = 0; + rClockControl2.PllBypass = pSettings->bPllBypass; + + /* Issue a soft reset to the chip */ + /* Note: Since we may be coming in with 3780i clocks suspended, we must keep + * soft-reset active for 10ms. + */ + rSlaveControl.ClockControl = 0; + rSlaveControl.SoftReset = TRUE; + rSlaveControl.ConfigMode = FALSE; + rSlaveControl.Reserved = 0; + + PRINTK_4(TRACE_3780I, + "3780i::dsp3780i_EnableDSP usDspBaseIO %x index %x taddr %x\n", + usDspBaseIO, DSP_IsaSlaveControl, + usDspBaseIO + DSP_IsaSlaveControl); + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_EnableDSP rSlaveContrl %x\n", + MKWORD(rSlaveControl)); + + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); + MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl); + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_EnableDSP rSlaveControl 2 %x\n", tval); + + + for (i = 0; i < 11; i++) + udelay(2000); + + rSlaveControl.SoftReset = FALSE; + OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); + + MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl); + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780i_EnableDSP rSlaveControl 3 %x\n", tval); + + + /* Program our general configuration registers */ + WriteGenCfg(DSP_HBridgeCfg1Index, MKBYTE(rHBridgeCfg1)); + WriteGenCfg(DSP_HBridgeCfg2Index, MKBYTE(rHBridgeCfg2)); + WriteGenCfg(DSP_BusMasterCfg1Index, MKBYTE(rBusmasterCfg1)); + WriteGenCfg(DSP_BusMasterCfg2Index, MKBYTE(rBusmasterCfg2)); + WriteGenCfg(DSP_IsaProtCfgIndex, MKBYTE(rIsaProtCfg)); + WriteGenCfg(DSP_PowerMgCfgIndex, MKBYTE(rPowerMgmtCfg)); + WriteGenCfg(DSP_HBusTimerCfgIndex, MKBYTE(rHBusTimerCfg)); + + if (pSettings->bModemEnabled) { + WriteGenCfg(DSP_UartCfg1Index, MKBYTE(rUartCfg1)); + WriteGenCfg(DSP_UartCfg2Index, MKBYTE(rUartCfg2)); + } + + + rHBridgeControl.EnableDspInt = FALSE; + rHBridgeControl.MemAutoInc = TRUE; + rHBridgeControl.IoAutoInc = FALSE; + rHBridgeControl.DiagnosticMode = FALSE; + + PRINTK_3(TRACE_3780I, + "3780i::dsp3780i_EnableDSP DSP_HBridgeControl %x rHBridgeControl %x\n", + DSP_HBridgeControl, MKWORD(rHBridgeControl)); + + OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); + spin_unlock_irqrestore(&dsp_lock, flags); + WriteMsaCfg(DSP_LBusTimeoutDisable, MKWORD(rLBusTimeoutDisable)); + WriteMsaCfg(DSP_ClockControl_1, MKWORD(rClockControl1)); + WriteMsaCfg(DSP_ClockControl_2, MKWORD(rClockControl2)); + WriteMsaCfg(DSP_ChipReset, MKWORD(rChipReset)); + + ChipID = ReadMsaCfg(DSP_ChipID); + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780I_EnableDSP exiting bRC=TRUE, ChipID %x\n", + ChipID); + + return 0; +} + +int dsp3780I_DisableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings) +{ + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + DSP_ISA_SLAVE_CONTROL rSlaveControl; + + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP entry\n"); + + rSlaveControl.ClockControl = 0; + rSlaveControl.SoftReset = TRUE; + rSlaveControl.ConfigMode = FALSE; + rSlaveControl.Reserved = 0; + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); + + udelay(5); + + rSlaveControl.ClockControl = 1; + OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); + spin_unlock_irqrestore(&dsp_lock, flags); + + udelay(5); + + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP exit\n"); + + return 0; +} + +int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings) +{ + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + DSP_BOOT_DOMAIN rBootDomain; + DSP_HBRIDGE_CONTROL rHBridgeControl; + + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset entry\n"); + + spin_lock_irqsave(&dsp_lock, flags); + /* Mask DSP to PC interrupt */ + MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl); + + PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rHBridgeControl %x\n", + MKWORD(rHBridgeControl)); + + rHBridgeControl.EnableDspInt = FALSE; + OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); + spin_unlock_irqrestore(&dsp_lock, flags); + + /* Reset the core via the boot domain register */ + rBootDomain.ResetCore = TRUE; + rBootDomain.Halt = TRUE; + rBootDomain.NMI = TRUE; + rBootDomain.Reserved = 0; + + PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rBootDomain %x\n", + MKWORD(rBootDomain)); + + WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); + + /* Reset all the chiplets and then reactivate them */ + WriteMsaCfg(DSP_ChipReset, 0xFFFF); + udelay(5); + WriteMsaCfg(DSP_ChipReset, + (unsigned short) (~pSettings->usChipletEnable)); + + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset exit bRC=0\n"); + + return 0; +} + + +int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings) +{ + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + DSP_BOOT_DOMAIN rBootDomain; + DSP_HBRIDGE_CONTROL rHBridgeControl; + + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run entry\n"); + + + /* Transition the core to a running state */ + rBootDomain.ResetCore = TRUE; + rBootDomain.Halt = FALSE; + rBootDomain.NMI = TRUE; + rBootDomain.Reserved = 0; + WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); + + udelay(5); + + rBootDomain.ResetCore = FALSE; + WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); + udelay(5); + + rBootDomain.NMI = FALSE; + WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); + udelay(5); + + /* Enable DSP to PC interrupt */ + spin_lock_irqsave(&dsp_lock, flags); + MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl); + rHBridgeControl.EnableDspInt = TRUE; + + PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Run rHBridgeControl %x\n", + MKWORD(rHBridgeControl)); + + OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); + spin_unlock_irqrestore(&dsp_lock, flags); + + + PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run exit bRC=TRUE\n"); + + return 0; +} + + +int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr) +{ + unsigned short __user *pusBuffer = pvBuffer; + unsigned short val; + + + PRINTK_5(TRACE_3780I, + "3780i::dsp3780I_ReadDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", + usDspBaseIO, pusBuffer, uCount, ulDSPAddr); + + + /* Set the initial MSA address. No adjustments need to be made to data store addresses */ + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); + spin_unlock_irqrestore(&dsp_lock, flags); + + /* Transfer the memory block */ + while (uCount-- != 0) { + spin_lock_irqsave(&dsp_lock, flags); + val = InWordDsp(DSP_MsaDataDSISHigh); + spin_unlock_irqrestore(&dsp_lock, flags); + if(put_user(val, pusBuffer++)) + return -EFAULT; + + PRINTK_3(TRACE_3780I, + "3780I::dsp3780I_ReadDStore uCount %x val %x\n", + uCount, val); + + PaceMsaAccess(usDspBaseIO); + } + + + PRINTK_1(TRACE_3780I, + "3780I::dsp3780I_ReadDStore exit bRC=TRUE\n"); + + return 0; +} + +int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO, + void __user *pvBuffer, unsigned uCount, + unsigned long ulDSPAddr) +{ + unsigned short __user *pusBuffer = pvBuffer; + unsigned short val; + + + PRINTK_5(TRACE_3780I, + "3780i::dsp3780I_ReadAndDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", + usDspBaseIO, pusBuffer, uCount, ulDSPAddr); + + + /* Set the initial MSA address. No adjustments need to be made to data store addresses */ + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); + spin_unlock_irqrestore(&dsp_lock, flags); + + /* Transfer the memory block */ + while (uCount-- != 0) { + spin_lock_irqsave(&dsp_lock, flags); + val = InWordDsp(DSP_ReadAndClear); + spin_unlock_irqrestore(&dsp_lock, flags); + if(put_user(val, pusBuffer++)) + return -EFAULT; + + PRINTK_3(TRACE_3780I, + "3780I::dsp3780I_ReadAndCleanDStore uCount %x val %x\n", + uCount, val); + + PaceMsaAccess(usDspBaseIO); + } + + + PRINTK_1(TRACE_3780I, + "3780I::dsp3780I_ReadAndClearDStore exit bRC=TRUE\n"); + + return 0; +} + + +int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr) +{ + unsigned short __user *pusBuffer = pvBuffer; + + + PRINTK_5(TRACE_3780I, + "3780i::dsp3780D_WriteDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", + usDspBaseIO, pusBuffer, uCount, ulDSPAddr); + + + /* Set the initial MSA address. No adjustments need to be made to data store addresses */ + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); + spin_unlock_irqrestore(&dsp_lock, flags); + + /* Transfer the memory block */ + while (uCount-- != 0) { + unsigned short val; + if(get_user(val, pusBuffer++)) + return -EFAULT; + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaDataDSISHigh, val); + spin_unlock_irqrestore(&dsp_lock, flags); + + PRINTK_3(TRACE_3780I, + "3780I::dsp3780I_WriteDStore uCount %x val %x\n", + uCount, val); + + PaceMsaAccess(usDspBaseIO); + } + + + PRINTK_1(TRACE_3780I, + "3780I::dsp3780D_WriteDStore exit bRC=TRUE\n"); + + return 0; +} + + +int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr) +{ + unsigned short __user *pusBuffer = pvBuffer; + + PRINTK_5(TRACE_3780I, + "3780i::dsp3780I_ReadIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", + usDspBaseIO, pusBuffer, uCount, ulDSPAddr); + + /* + * Set the initial MSA address. To convert from an instruction store + * address to an MSA address + * shift the address two bits to the left and set bit 22 + */ + ulDSPAddr = (ulDSPAddr << 2) | (1 << 22); + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); + spin_unlock_irqrestore(&dsp_lock, flags); + + /* Transfer the memory block */ + while (uCount-- != 0) { + unsigned short val_lo, val_hi; + spin_lock_irqsave(&dsp_lock, flags); + val_lo = InWordDsp(DSP_MsaDataISLow); + val_hi = InWordDsp(DSP_MsaDataDSISHigh); + spin_unlock_irqrestore(&dsp_lock, flags); + if(put_user(val_lo, pusBuffer++)) + return -EFAULT; + if(put_user(val_hi, pusBuffer++)) + return -EFAULT; + + PRINTK_4(TRACE_3780I, + "3780I::dsp3780I_ReadIStore uCount %x val_lo %x val_hi %x\n", + uCount, val_lo, val_hi); + + PaceMsaAccess(usDspBaseIO); + + } + + PRINTK_1(TRACE_3780I, + "3780I::dsp3780I_ReadIStore exit bRC=TRUE\n"); + + return 0; +} + + +int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr) +{ + unsigned short __user *pusBuffer = pvBuffer; + + PRINTK_5(TRACE_3780I, + "3780i::dsp3780I_WriteIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", + usDspBaseIO, pusBuffer, uCount, ulDSPAddr); + + + /* + * Set the initial MSA address. To convert from an instruction store + * address to an MSA address + * shift the address two bits to the left and set bit 22 + */ + ulDSPAddr = (ulDSPAddr << 2) | (1 << 22); + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); + OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); + spin_unlock_irqrestore(&dsp_lock, flags); + + /* Transfer the memory block */ + while (uCount-- != 0) { + unsigned short val_lo, val_hi; + if(get_user(val_lo, pusBuffer++)) + return -EFAULT; + if(get_user(val_hi, pusBuffer++)) + return -EFAULT; + spin_lock_irqsave(&dsp_lock, flags); + OutWordDsp(DSP_MsaDataISLow, val_lo); + OutWordDsp(DSP_MsaDataDSISHigh, val_hi); + spin_unlock_irqrestore(&dsp_lock, flags); + + PRINTK_4(TRACE_3780I, + "3780I::dsp3780I_WriteIStore uCount %x val_lo %x val_hi %x\n", + uCount, val_lo, val_hi); + + PaceMsaAccess(usDspBaseIO); + + } + + PRINTK_1(TRACE_3780I, + "3780I::dsp3780I_WriteIStore exit bRC=TRUE\n"); + + return 0; +} + + +int dsp3780I_GetIPCSource(unsigned short usDspBaseIO, + unsigned short *pusIPCSource) +{ + DSP_HBRIDGE_CONTROL rHBridgeControl; + unsigned short temp; + + + PRINTK_3(TRACE_3780I, + "3780i::dsp3780I_GetIPCSource entry usDspBaseIO %x pusIPCSource %p\n", + usDspBaseIO, pusIPCSource); + + /* + * Disable DSP to PC interrupts, read the interrupt register, + * clear the pending IPC bits, and reenable DSP to PC interrupts + */ + spin_lock_irqsave(&dsp_lock, flags); + MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl); + rHBridgeControl.EnableDspInt = FALSE; + OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); + + *pusIPCSource = InWordDsp(DSP_Interrupt); + temp = (unsigned short) ~(*pusIPCSource); + + PRINTK_3(TRACE_3780I, + "3780i::dsp3780I_GetIPCSource, usIPCSource %x ~ %x\n", + *pusIPCSource, temp); + + OutWordDsp(DSP_Interrupt, (unsigned short) ~(*pusIPCSource)); + + rHBridgeControl.EnableDspInt = TRUE; + OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); + spin_unlock_irqrestore(&dsp_lock, flags); + + + PRINTK_2(TRACE_3780I, + "3780i::dsp3780I_GetIPCSource exit usIPCSource %x\n", + *pusIPCSource); + + return 0; +} diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h new file mode 100644 index 000000000000..3e7d020d1bf4 --- /dev/null +++ b/drivers/char/mwave/3780i.h @@ -0,0 +1,362 @@ +/* +* +* 3780i.h -- declarations for 3780i.c +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#ifndef _LINUX_3780I_H +#define _LINUX_3780I_H + +#include <asm/io.h> + +/* DSP I/O port offsets and definitions */ +#define DSP_IsaSlaveControl 0x0000 /* ISA slave control register */ +#define DSP_IsaSlaveStatus 0x0001 /* ISA slave status register */ +#define DSP_ConfigAddress 0x0002 /* General config address register */ +#define DSP_ConfigData 0x0003 /* General config data register */ +#define DSP_HBridgeControl 0x0002 /* HBridge control register */ +#define DSP_MsaAddrLow 0x0004 /* MSP System Address, low word */ +#define DSP_MsaAddrHigh 0x0006 /* MSP System Address, high word */ +#define DSP_MsaDataDSISHigh 0x0008 /* MSA data register: d-store word or high byte of i-store */ +#define DSP_MsaDataISLow 0x000A /* MSA data register: low word of i-store */ +#define DSP_ReadAndClear 0x000C /* MSA read and clear data register */ +#define DSP_Interrupt 0x000E /* Interrupt register (IPC source) */ + +typedef struct { + unsigned char ClockControl:1; /* RW: Clock control: 0=normal, 1=stop 3780i clocks */ + unsigned char SoftReset:1; /* RW: Soft reset 0=normal, 1=soft reset active */ + unsigned char ConfigMode:1; /* RW: Configuration mode, 0=normal, 1=config mode */ + unsigned char Reserved:5; /* 0: Reserved */ +} DSP_ISA_SLAVE_CONTROL; + + +typedef struct { + unsigned short EnableDspInt:1; /* RW: Enable DSP to X86 ISA interrupt 0=mask it, 1=enable it */ + unsigned short MemAutoInc:1; /* RW: Memory address auto increment, 0=disable, 1=enable */ + unsigned short IoAutoInc:1; /* RW: I/O address auto increment, 0=disable, 1=enable */ + unsigned short DiagnosticMode:1; /* RW: Disgnostic mode 0=nromal, 1=diagnostic mode */ + unsigned short IsaPacingTimer:12; /* R: ISA access pacing timer: count of core cycles stolen */ +} DSP_HBRIDGE_CONTROL; + + +/* DSP register indexes used with the configuration register address (index) register */ +#define DSP_UartCfg1Index 0x0003 /* UART config register 1 */ +#define DSP_UartCfg2Index 0x0004 /* UART config register 2 */ +#define DSP_HBridgeCfg1Index 0x0007 /* HBridge config register 1 */ +#define DSP_HBridgeCfg2Index 0x0008 /* HBridge config register 2 */ +#define DSP_BusMasterCfg1Index 0x0009 /* ISA bus master config register 1 */ +#define DSP_BusMasterCfg2Index 0x000A /* ISA bus master config register 2 */ +#define DSP_IsaProtCfgIndex 0x000F /* ISA protocol control register */ +#define DSP_PowerMgCfgIndex 0x0010 /* Low poser suspend/resume enable */ +#define DSP_HBusTimerCfgIndex 0x0011 /* HBUS timer load value */ + +typedef struct { + unsigned char IrqActiveLow:1; /* RW: IRQ active high or low: 0=high, 1=low */ + unsigned char IrqPulse:1; /* RW: IRQ pulse or level: 0=level, 1=pulse */ + unsigned char Irq:3; /* RW: IRQ selection */ + unsigned char BaseIO:2; /* RW: Base I/O selection */ + unsigned char Reserved:1; /* 0: Reserved */ +} DSP_UART_CFG_1; + +typedef struct { + unsigned char Enable:1; /* RW: Enable I/O and IRQ: 0=FALSE, 1=TRUE */ + unsigned char Reserved:7; /* 0: Reserved */ +} DSP_UART_CFG_2; + +typedef struct { + unsigned char IrqActiveLow:1; /* RW: IRQ active high=0 or low=1 */ + unsigned char IrqPulse:1; /* RW: IRQ pulse=1 or level=0 */ + unsigned char Irq:3; /* RW: IRQ selection */ + unsigned char AccessMode:1; /* RW: 16-bit register access method 0=byte, 1=word */ + unsigned char Reserved:2; /* 0: Reserved */ +} DSP_HBRIDGE_CFG_1; + +typedef struct { + unsigned char Enable:1; /* RW: enable I/O and IRQ: 0=FALSE, 1=TRUE */ + unsigned char Reserved:7; /* 0: Reserved */ +} DSP_HBRIDGE_CFG_2; + + +typedef struct { + unsigned char Dma:3; /* RW: DMA channel selection */ + unsigned char NumTransfers:2; /* RW: Maximum # of transfers once being granted the ISA bus */ + unsigned char ReRequest:2; /* RW: Minumum delay between releasing the ISA bus and requesting it again */ + unsigned char MEMCS16:1; /* RW: ISA signal MEMCS16: 0=disabled, 1=enabled */ +} DSP_BUSMASTER_CFG_1; + +typedef struct { + unsigned char IsaMemCmdWidth:2; /* RW: ISA memory command width */ + unsigned char Reserved:6; /* 0: Reserved */ +} DSP_BUSMASTER_CFG_2; + + +typedef struct { + unsigned char GateIOCHRDY:1; /* RW: Enable IOCHRDY gating: 0=FALSE, 1=TRUE */ + unsigned char Reserved:7; /* 0: Reserved */ +} DSP_ISA_PROT_CFG; + +typedef struct { + unsigned char Enable:1; /* RW: Enable low power suspend/resume 0=FALSE, 1=TRUE */ + unsigned char Reserved:7; /* 0: Reserved */ +} DSP_POWER_MGMT_CFG; + +typedef struct { + unsigned char LoadValue:8; /* RW: HBUS timer load value */ +} DSP_HBUS_TIMER_CFG; + + + +/* DSP registers that exist in MSA I/O space */ +#define DSP_ChipID 0x80000000 +#define DSP_MspBootDomain 0x80000580 +#define DSP_LBusTimeoutDisable 0x80000580 +#define DSP_ClockControl_1 0x8000058A +#define DSP_ClockControl_2 0x8000058C +#define DSP_ChipReset 0x80000588 +#define DSP_GpioModeControl_15_8 0x80000082 +#define DSP_GpioDriverEnable_15_8 0x80000076 +#define DSP_GpioOutputData_15_8 0x80000072 + +typedef struct { + unsigned short NMI:1; /* RW: non maskable interrupt */ + unsigned short Halt:1; /* RW: Halt MSP clock */ + unsigned short ResetCore:1; /* RW: Reset MSP core interface */ + unsigned short Reserved:13; /* 0: Reserved */ +} DSP_BOOT_DOMAIN; + +typedef struct { + unsigned short DisableTimeout:1; /* RW: Disable LBus timeout */ + unsigned short Reserved:15; /* 0: Reserved */ +} DSP_LBUS_TIMEOUT_DISABLE; + +typedef struct { + unsigned short Memory:1; /* RW: Reset memory interface */ + unsigned short SerialPort1:1; /* RW: Reset serial port 1 interface */ + unsigned short SerialPort2:1; /* RW: Reset serial port 2 interface */ + unsigned short SerialPort3:1; /* RW: Reset serial port 3 interface */ + unsigned short Gpio:1; /* RW: Reset GPIO interface */ + unsigned short Dma:1; /* RW: Reset DMA interface */ + unsigned short SoundBlaster:1; /* RW: Reset soundblaster interface */ + unsigned short Uart:1; /* RW: Reset UART interface */ + unsigned short Midi:1; /* RW: Reset MIDI interface */ + unsigned short IsaMaster:1; /* RW: Reset ISA master interface */ + unsigned short Reserved:6; /* 0: Reserved */ +} DSP_CHIP_RESET; + +typedef struct { + unsigned short N_Divisor:6; /* RW: (N) PLL output clock divisor */ + unsigned short Reserved1:2; /* 0: reserved */ + unsigned short M_Multiplier:6; /* RW: (M) PLL feedback clock multiplier */ + unsigned short Reserved2:2; /* 0: reserved */ +} DSP_CLOCK_CONTROL_1; + +typedef struct { + unsigned short PllBypass:1; /* RW: PLL Bypass */ + unsigned short Reserved:15; /* 0: Reserved */ +} DSP_CLOCK_CONTROL_2; + +typedef struct { + unsigned short Latch8:1; + unsigned short Latch9:1; + unsigned short Latch10:1; + unsigned short Latch11:1; + unsigned short Latch12:1; + unsigned short Latch13:1; + unsigned short Latch14:1; + unsigned short Latch15:1; + unsigned short Mask8:1; + unsigned short Mask9:1; + unsigned short Mask10:1; + unsigned short Mask11:1; + unsigned short Mask12:1; + unsigned short Mask13:1; + unsigned short Mask14:1; + unsigned short Mask15:1; +} DSP_GPIO_OUTPUT_DATA_15_8; + +typedef struct { + unsigned short Enable8:1; + unsigned short Enable9:1; + unsigned short Enable10:1; + unsigned short Enable11:1; + unsigned short Enable12:1; + unsigned short Enable13:1; + unsigned short Enable14:1; + unsigned short Enable15:1; + unsigned short Mask8:1; + unsigned short Mask9:1; + unsigned short Mask10:1; + unsigned short Mask11:1; + unsigned short Mask12:1; + unsigned short Mask13:1; + unsigned short Mask14:1; + unsigned short Mask15:1; +} DSP_GPIO_DRIVER_ENABLE_15_8; + +typedef struct { + unsigned short GpioMode8:2; + unsigned short GpioMode9:2; + unsigned short GpioMode10:2; + unsigned short GpioMode11:2; + unsigned short GpioMode12:2; + unsigned short GpioMode13:2; + unsigned short GpioMode14:2; + unsigned short GpioMode15:2; +} DSP_GPIO_MODE_15_8; + +/* Component masks that are defined in dspmgr.h */ +#define MW_ADC_MASK 0x0001 +#define MW_AIC2_MASK 0x0006 +#define MW_MIDI_MASK 0x0008 +#define MW_CDDAC_MASK 0x8001 +#define MW_AIC1_MASK 0xE006 +#define MW_UART_MASK 0xE00A +#define MW_ACI_MASK 0xE00B + +/* +* Definition of 3780i configuration structure. Unless otherwise stated, +* these values are provided as input to the 3780i support layer. At present, +* the only values maintained by the 3780i support layer are the saved UART +* registers. +*/ +typedef struct _DSP_3780I_CONFIG_SETTINGS { + + /* Location of base configuration register */ + unsigned short usBaseConfigIO; + + /* Enables for various DSP components */ + int bDSPEnabled; + int bModemEnabled; + int bInterruptClaimed; + + /* IRQ, DMA, and Base I/O addresses for various DSP components */ + unsigned short usDspIrq; + unsigned short usDspDma; + unsigned short usDspBaseIO; + unsigned short usUartIrq; + unsigned short usUartBaseIO; + + /* IRQ modes for various DSP components */ + int bDspIrqActiveLow; + int bUartIrqActiveLow; + int bDspIrqPulse; + int bUartIrqPulse; + + /* Card abilities */ + unsigned uIps; + unsigned uDStoreSize; + unsigned uIStoreSize; + unsigned uDmaBandwidth; + + /* Adapter specific 3780i settings */ + unsigned short usNumTransfers; + unsigned short usReRequest; + int bEnableMEMCS16; + unsigned short usIsaMemCmdWidth; + int bGateIOCHRDY; + int bEnablePwrMgmt; + unsigned short usHBusTimerLoadValue; + int bDisableLBusTimeout; + unsigned short usN_Divisor; + unsigned short usM_Multiplier; + int bPllBypass; + unsigned short usChipletEnable; /* Used with the chip reset register to enable specific chiplets */ + + /* Saved UART registers. These are maintained by the 3780i support layer. */ + int bUartSaved; /* True after a successful save of the UART registers */ + unsigned char ucIER; /* Interrupt enable register */ + unsigned char ucFCR; /* FIFO control register */ + unsigned char ucLCR; /* Line control register */ + unsigned char ucMCR; /* Modem control register */ + unsigned char ucSCR; /* Scratch register */ + unsigned char ucDLL; /* Divisor latch, low byte */ + unsigned char ucDLM; /* Divisor latch, high byte */ +} DSP_3780I_CONFIG_SETTINGS; + + +/* 3780i support functions */ +int dsp3780I_EnableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings, + unsigned short *pIrqMap, + unsigned short *pDmaMap); +int dsp3780I_DisableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings); +int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings); +int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings); +int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr); +int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO, + void __user *pvBuffer, unsigned uCount, + unsigned long ulDSPAddr); +int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr); +int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr); +int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer, + unsigned uCount, unsigned long ulDSPAddr); +unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO, + unsigned long ulMsaAddr); +void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO, + unsigned long ulMsaAddr, unsigned short usValue); +void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex, + unsigned char ucValue); +unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO, + unsigned uIndex); +int dsp3780I_GetIPCSource(unsigned short usDspBaseIO, + unsigned short *pusIPCSource); + +/* I/O port access macros */ +#define MKWORD(var) (*((unsigned short *)(&var))) +#define MKBYTE(var) (*((unsigned char *)(&var))) + +#define WriteMsaCfg(addr,value) dsp3780I_WriteMsaCfg(usDspBaseIO,addr,value) +#define ReadMsaCfg(addr) dsp3780I_ReadMsaCfg(usDspBaseIO,addr) +#define WriteGenCfg(index,value) dsp3780I_WriteGenCfg(usDspBaseIO,index,value) +#define ReadGenCfg(index) dsp3780I_ReadGenCfg(usDspBaseIO,index) + +#define InWordDsp(index) inw(usDspBaseIO+index) +#define InByteDsp(index) inb(usDspBaseIO+index) +#define OutWordDsp(index,value) outw(value,usDspBaseIO+index) +#define OutByteDsp(index,value) outb(value,usDspBaseIO+index) + +#endif diff --git a/drivers/char/mwave/Makefile b/drivers/char/mwave/Makefile new file mode 100644 index 000000000000..754c9e2058ed --- /dev/null +++ b/drivers/char/mwave/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for ACP Modem (Mwave). +# +# See the README file in this directory for more info. <paulsch@us.ibm.com> +# + +obj-$(CONFIG_MWAVE) += mwave.o + +mwave-objs := mwavedd.o smapi.o tp3780i.o 3780i.o + +# To have the mwave driver disable other uarts if necessary +# EXTRA_CFLAGS += -DMWAVE_FUTZ_WITH_OTHER_DEVICES + +# To compile in lots (~20 KiB) of run-time enablable printk()s for debugging: +EXTRA_CFLAGS += -DMW_TRACE diff --git a/drivers/char/mwave/README b/drivers/char/mwave/README new file mode 100644 index 000000000000..70f8d19fb79f --- /dev/null +++ b/drivers/char/mwave/README @@ -0,0 +1,50 @@ +Module options +-------------- + +The mwave module takes the following options. Note that these options +are not saved by the BIOS and so do not persist after unload and reload. + + mwave_debug=value, where value is bitwise OR of trace flags: + 0x0001 mwavedd api tracing + 0x0002 smapi api tracing + 0x0004 3780i tracing + 0x0008 tp3780i tracing + + Tracing only occurs if the driver has been compiled with the + MW_TRACE macro #defined (i.e. let EXTRA_CFLAGS += -DMW_TRACE + in the Makefile). + + mwave_3780i_irq=5/7/10/11/15 + If the dsp irq has not been setup and stored in bios by the + thinkpad configuration utility then this parameter allows the + irq used by the dsp to be configured. + + mwave_3780i_io=0x130/0x350/0x0070/0xDB0 + If the dsp io range has not been setup and stored in bios by the + thinkpad configuration utility then this parameter allows the + io range used by the dsp to be configured. + + mwave_uart_irq=3/4 + If the mwave's uart irq has not been setup and stored in bios by the + thinkpad configuration utility then this parameter allows the + irq used by the mwave uart to be configured. + + mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8 + If the uart io range has not been setup and stored in bios by the + thinkpad configuration utility then this parameter allows the + io range used by the mwave uart to be configured. + +Example to enable the 3780i DSP using ttyS1 resources: + + insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8 + +Accessing the driver +-------------------- + +You must also create a node for the driver. Without devfs: + mkdir -p /dev/modems + mknod --mode=660 /dev/modems/mwave c 10 219 +With devfs: + mkdir -p /dev/modems + ln -s ../misc/mwave /dev/modems/mwave + diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c new file mode 100644 index 000000000000..d37625d47746 --- /dev/null +++ b/drivers/char/mwave/mwavedd.c @@ -0,0 +1,674 @@ +/* +* +* mwavedd.c -- mwave device driver +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/miscdevice.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include "smapi.h" +#include "mwavedd.h" +#include "3780i.h" +#include "tp3780i.h" + +MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver"); +MODULE_AUTHOR("Mike Sullivan and Paul Schroeder"); +MODULE_LICENSE("GPL"); + +/* +* These parameters support the setting of MWave resources. Note that no +* checks are made against other devices (ie. superio) for conflicts. +* We'll depend on users using the tpctl utility to do that for now +*/ +int mwave_debug = 0; +int mwave_3780i_irq = 0; +int mwave_3780i_io = 0; +int mwave_uart_irq = 0; +int mwave_uart_io = 0; +module_param(mwave_debug, int, 0); +module_param(mwave_3780i_irq, int, 0); +module_param(mwave_3780i_io, int, 0); +module_param(mwave_uart_irq, int, 0); +module_param(mwave_uart_io, int, 0); + +static int mwave_open(struct inode *inode, struct file *file); +static int mwave_close(struct inode *inode, struct file *file); +static int mwave_ioctl(struct inode *inode, struct file *filp, + unsigned int iocmd, unsigned long ioarg); + +MWAVE_DEVICE_DATA mwave_s_mdd; + +static int mwave_open(struct inode *inode, struct file *file) +{ + unsigned int retval = 0; + + PRINTK_3(TRACE_MWAVE, + "mwavedd::mwave_open, entry inode %p file %p\n", + inode, file); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_open, exit return retval %x\n", retval); + + return retval; +} + +static int mwave_close(struct inode *inode, struct file *file) +{ + unsigned int retval = 0; + + PRINTK_3(TRACE_MWAVE, + "mwavedd::mwave_close, entry inode %p file %p\n", + inode, file); + + PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n", + retval); + + return retval; +} + +static int mwave_ioctl(struct inode *inode, struct file *file, + unsigned int iocmd, unsigned long ioarg) +{ + unsigned int retval = 0; + pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; + void __user *arg = (void __user *)ioarg; + + PRINTK_5(TRACE_MWAVE, + "mwavedd::mwave_ioctl, entry inode %p file %p cmd %x arg %x\n", + inode, file, iocmd, (int) ioarg); + + switch (iocmd) { + + case IOCTL_MW_RESET: + PRINTK_1(TRACE_MWAVE, + "mwavedd::mwave_ioctl, IOCTL_MW_RESET" + " calling tp3780I_ResetDSP\n"); + retval = tp3780I_ResetDSP(&pDrvData->rBDData); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl, IOCTL_MW_RESET" + " retval %x from tp3780I_ResetDSP\n", + retval); + break; + + case IOCTL_MW_RUN: + PRINTK_1(TRACE_MWAVE, + "mwavedd::mwave_ioctl, IOCTL_MW_RUN" + " calling tp3780I_StartDSP\n"); + retval = tp3780I_StartDSP(&pDrvData->rBDData); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl, IOCTL_MW_RUN" + " retval %x from tp3780I_StartDSP\n", + retval); + break; + + case IOCTL_MW_DSP_ABILITIES: { + MW_ABILITIES rAbilities; + + PRINTK_1(TRACE_MWAVE, + "mwavedd::mwave_ioctl," + " IOCTL_MW_DSP_ABILITIES calling" + " tp3780I_QueryAbilities\n"); + retval = tp3780I_QueryAbilities(&pDrvData->rBDData, + &rAbilities); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" + " retval %x from tp3780I_QueryAbilities\n", + retval); + if (retval == 0) { + if( copy_to_user(arg, &rAbilities, + sizeof(MW_ABILITIES)) ) + return -EFAULT; + } + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" + " exit retval %x\n", + retval); + } + break; + + case IOCTL_MW_READ_DATA: + case IOCTL_MW_READCLEAR_DATA: { + MW_READWRITE rReadData; + unsigned short __user *pusBuffer = NULL; + + if( copy_from_user(&rReadData, arg, + sizeof(MW_READWRITE)) ) + return -EFAULT; + pusBuffer = (unsigned short __user *) (rReadData.pBuf); + + PRINTK_4(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA," + " size %lx, ioarg %lx pusBuffer %p\n", + rReadData.ulDataLength, ioarg, pusBuffer); + retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, + iocmd, + pusBuffer, + rReadData.ulDataLength, + rReadData.usDspAddress); + } + break; + + case IOCTL_MW_READ_INST: { + MW_READWRITE rReadData; + unsigned short __user *pusBuffer = NULL; + + if( copy_from_user(&rReadData, arg, + sizeof(MW_READWRITE)) ) + return -EFAULT; + pusBuffer = (unsigned short __user *) (rReadData.pBuf); + + PRINTK_4(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_READ_INST," + " size %lx, ioarg %lx pusBuffer %p\n", + rReadData.ulDataLength / 2, ioarg, + pusBuffer); + retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, + iocmd, pusBuffer, + rReadData.ulDataLength / 2, + rReadData.usDspAddress); + } + break; + + case IOCTL_MW_WRITE_DATA: { + MW_READWRITE rWriteData; + unsigned short __user *pusBuffer = NULL; + + if( copy_from_user(&rWriteData, arg, + sizeof(MW_READWRITE)) ) + return -EFAULT; + pusBuffer = (unsigned short __user *) (rWriteData.pBuf); + + PRINTK_4(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA," + " size %lx, ioarg %lx pusBuffer %p\n", + rWriteData.ulDataLength, ioarg, + pusBuffer); + retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, + iocmd, pusBuffer, + rWriteData.ulDataLength, + rWriteData.usDspAddress); + } + break; + + case IOCTL_MW_WRITE_INST: { + MW_READWRITE rWriteData; + unsigned short __user *pusBuffer = NULL; + + if( copy_from_user(&rWriteData, arg, + sizeof(MW_READWRITE)) ) + return -EFAULT; + pusBuffer = (unsigned short __user *)(rWriteData.pBuf); + + PRINTK_4(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST," + " size %lx, ioarg %lx pusBuffer %p\n", + rWriteData.ulDataLength, ioarg, + pusBuffer); + retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData, + iocmd, pusBuffer, + rWriteData.ulDataLength, + rWriteData.usDspAddress); + } + break; + + case IOCTL_MW_REGISTER_IPC: { + unsigned int ipcnum = (unsigned int) ioarg; + + PRINTK_3(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" + " ipcnum %x entry usIntCount %x\n", + ipcnum, + pDrvData->IPCs[ipcnum].usIntCount); + + if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::mwave_ioctl:" + " IOCTL_MW_REGISTER_IPC:" + " Error: Invalid ipcnum %x\n", + ipcnum); + return -EINVAL; + } + pDrvData->IPCs[ipcnum].bIsHere = FALSE; + pDrvData->IPCs[ipcnum].bIsEnabled = TRUE; + + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" + " ipcnum %x exit\n", + ipcnum); + } + break; + + case IOCTL_MW_GET_IPC: { + unsigned int ipcnum = (unsigned int) ioarg; + + PRINTK_3(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC" + " ipcnum %x, usIntCount %x\n", + ipcnum, + pDrvData->IPCs[ipcnum].usIntCount); + if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::mwave_ioctl:" + " IOCTL_MW_GET_IPC: Error:" + " Invalid ipcnum %x\n", ipcnum); + return -EINVAL; + } + + if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) { + DECLARE_WAITQUEUE(wait, current); + + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl, thread for" + " ipc %x going to sleep\n", + ipcnum); + add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); + pDrvData->IPCs[ipcnum].bIsHere = TRUE; + set_current_state(TASK_INTERRUPTIBLE); + /* check whether an event was signalled by */ + /* the interrupt handler while we were gone */ + if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */ + pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */ + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl" + " IOCTL_MW_GET_IPC ipcnum %x" + " handling first int\n", + ipcnum); + } else { /* either 1st int has not yet occurred, or we have already handled the first int */ + schedule(); + if (pDrvData->IPCs[ipcnum].usIntCount == 1) { + pDrvData->IPCs[ipcnum].usIntCount = 2; + } + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl" + " IOCTL_MW_GET_IPC ipcnum %x" + " woke up and returning to" + " application\n", + ipcnum); + } + pDrvData->IPCs[ipcnum].bIsHere = FALSE; + remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); + set_current_state(TASK_RUNNING); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC," + " returning thread for ipc %x" + " processing\n", + ipcnum); + } + } + break; + + case IOCTL_MW_UNREGISTER_IPC: { + unsigned int ipcnum = (unsigned int) ioarg; + + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC" + " ipcnum %x\n", + ipcnum); + if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::mwave_ioctl:" + " IOCTL_MW_UNREGISTER_IPC:" + " Error: Invalid ipcnum %x\n", + ipcnum); + return -EINVAL; + } + if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) { + pDrvData->IPCs[ipcnum].bIsEnabled = FALSE; + if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) { + wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue); + } + } + } + break; + + default: + PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:" + " Error: Unrecognized iocmd %x\n", + iocmd); + return -ENOTTY; + break; + } /* switch */ + + PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval); + + return retval; +} + + +static ssize_t mwave_read(struct file *file, char __user *buf, size_t count, + loff_t * ppos) +{ + PRINTK_5(TRACE_MWAVE, + "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n", + file, buf, count, ppos); + + return -EINVAL; +} + + +static ssize_t mwave_write(struct file *file, const char __user *buf, + size_t count, loff_t * ppos) +{ + PRINTK_5(TRACE_MWAVE, + "mwavedd::mwave_write entry file %p, buf %p," + " count %zx ppos %p\n", + file, buf, count, ppos); + + return -EINVAL; +} + + +static int register_serial_portandirq(unsigned int port, int irq) +{ + struct serial_struct serial; + + switch ( port ) { + case 0x3f8: + case 0x2f8: + case 0x3e8: + case 0x2e8: + /* OK */ + break; + default: + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::register_serial_portandirq:" + " Error: Illegal port %x\n", port ); + return -1; + } /* switch */ + /* port is okay */ + + switch ( irq ) { + case 3: + case 4: + case 5: + case 7: + /* OK */ + break; + default: + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::register_serial_portandirq:" + " Error: Illegal irq %x\n", irq ); + return -1; + } /* switch */ + /* irq is okay */ + + memset(&serial, 0, sizeof(serial)); + serial.port = port; + serial.irq = irq; + serial.flags = ASYNC_SHARE_IRQ; + + return register_serial(&serial); +} + + +static struct file_operations mwave_fops = { + .owner = THIS_MODULE, + .read = mwave_read, + .write = mwave_write, + .ioctl = mwave_ioctl, + .open = mwave_open, + .release = mwave_close +}; + + +static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops }; + +#if 0 /* totally b0rked */ +/* + * sysfs support <paulsch@us.ibm.com> + */ + +struct device mwave_device; + +/* Prevent code redundancy, create a macro for mwave_show_* functions. */ +#define mwave_show_function(attr_name, format_string, field) \ +static ssize_t mwave_show_##attr_name(struct device *dev, char *buf) \ +{ \ + DSP_3780I_CONFIG_SETTINGS *pSettings = \ + &mwave_s_mdd.rBDData.rDspSettings; \ + return sprintf(buf, format_string, pSettings->field); \ +} + +/* All of our attributes are read attributes. */ +#define mwave_dev_rd_attr(attr_name, format_string, field) \ + mwave_show_function(attr_name, format_string, field) \ +static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL) + +mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma); +mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq); +mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO); +mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq); +mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO); + +static struct device_attribute * const mwave_dev_attrs[] = { + &dev_attr_3780i_dma, + &dev_attr_3780i_irq, + &dev_attr_3780i_io, + &dev_attr_uart_irq, + &dev_attr_uart_io, +}; +#endif + +/* +* mwave_init is called on module load +* +* mwave_exit is called on module unload +* mwave_exit is also used to clean up after an aborted mwave_init +*/ +static void mwave_exit(void) +{ + pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; + + PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n"); + +#if 0 + for (i = 0; i < pDrvData->nr_registered_attrs; i++) + device_remove_file(&mwave_device, mwave_dev_attrs[i]); + pDrvData->nr_registered_attrs = 0; + + if (pDrvData->device_registered) { + device_unregister(&mwave_device); + pDrvData->device_registered = FALSE; + } +#endif + + if ( pDrvData->sLine >= 0 ) { + unregister_serial(pDrvData->sLine); + } + if (pDrvData->bMwaveDevRegistered) { + misc_deregister(&mwave_misc_dev); + } + if (pDrvData->bDSPEnabled) { + tp3780I_DisableDSP(&pDrvData->rBDData); + } + if (pDrvData->bResourcesClaimed) { + tp3780I_ReleaseResources(&pDrvData->rBDData); + } + if (pDrvData->bBDInitialized) { + tp3780I_Cleanup(&pDrvData->rBDData); + } + + PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n"); +} + +module_exit(mwave_exit); + +static int __init mwave_init(void) +{ + int i; + int retval = 0; + pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; + + PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n"); + + memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA)); + + pDrvData->bBDInitialized = FALSE; + pDrvData->bResourcesClaimed = FALSE; + pDrvData->bDSPEnabled = FALSE; + pDrvData->bDSPReset = FALSE; + pDrvData->bMwaveDevRegistered = FALSE; + pDrvData->sLine = -1; + + for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) { + pDrvData->IPCs[i].bIsEnabled = FALSE; + pDrvData->IPCs[i].bIsHere = FALSE; + pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */ + init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue); + } + + retval = tp3780I_InitializeBoardData(&pDrvData->rBDData); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_init, return from tp3780I_InitializeBoardData" + " retval %x\n", + retval); + if (retval) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::mwave_init: Error:" + " Failed to initialize board data\n"); + goto cleanup_error; + } + pDrvData->bBDInitialized = TRUE; + + retval = tp3780I_CalcResources(&pDrvData->rBDData); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_init, return from tp3780I_CalcResources" + " retval %x\n", + retval); + if (retval) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd:mwave_init: Error:" + " Failed to calculate resources\n"); + goto cleanup_error; + } + + retval = tp3780I_ClaimResources(&pDrvData->rBDData); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_init, return from tp3780I_ClaimResources" + " retval %x\n", + retval); + if (retval) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd:mwave_init: Error:" + " Failed to claim resources\n"); + goto cleanup_error; + } + pDrvData->bResourcesClaimed = TRUE; + + retval = tp3780I_EnableDSP(&pDrvData->rBDData); + PRINTK_2(TRACE_MWAVE, + "mwavedd::mwave_init, return from tp3780I_EnableDSP" + " retval %x\n", + retval); + if (retval) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd:mwave_init: Error:" + " Failed to enable DSP\n"); + goto cleanup_error; + } + pDrvData->bDSPEnabled = TRUE; + + if (misc_register(&mwave_misc_dev) < 0) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd:mwave_init: Error:" + " Failed to register misc device\n"); + goto cleanup_error; + } + pDrvData->bMwaveDevRegistered = TRUE; + + pDrvData->sLine = register_serial_portandirq( + pDrvData->rBDData.rDspSettings.usUartBaseIO, + pDrvData->rBDData.rDspSettings.usUartIrq + ); + if (pDrvData->sLine < 0) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd:mwave_init: Error:" + " Failed to register serial driver\n"); + goto cleanup_error; + } + /* uart is registered */ + +#if 0 + /* sysfs */ + memset(&mwave_device, 0, sizeof (struct device)); + snprintf(mwave_device.bus_id, BUS_ID_SIZE, "mwave"); + + if (device_register(&mwave_device)) + goto cleanup_error; + pDrvData->device_registered = TRUE; + for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) { + if(device_create_file(&mwave_device, mwave_dev_attrs[i])) { + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd:mwave_init: Error:" + " Failed to create sysfs file %s\n", + mwave_dev_attrs[i]->attr.name); + goto cleanup_error; + } + pDrvData->nr_registered_attrs++; + } +#endif + + /* SUCCESS! */ + return 0; + +cleanup_error: + PRINTK_ERROR(KERN_ERR_MWAVE + "mwavedd::mwave_init: Error:" + " Failed to initialize\n"); + mwave_exit(); /* clean up */ + + return -EIO; +} + +module_init(mwave_init); + diff --git a/drivers/char/mwave/mwavedd.h b/drivers/char/mwave/mwavedd.h new file mode 100644 index 000000000000..8eca61e0a19c --- /dev/null +++ b/drivers/char/mwave/mwavedd.h @@ -0,0 +1,150 @@ +/* +* +* mwavedd.h -- declarations for mwave device driver +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#ifndef _LINUX_MWAVEDD_H +#define _LINUX_MWAVEDD_H +#include "3780i.h" +#include "tp3780i.h" +#include "smapi.h" +#include "mwavepub.h" +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/wait.h> + +extern int mwave_debug; +extern int mwave_3780i_irq; +extern int mwave_3780i_io; +extern int mwave_uart_irq; +extern int mwave_uart_io; + +#define PRINTK_ERROR printk +#define KERN_ERR_MWAVE KERN_ERR "mwave: " + +#define TRACE_MWAVE 0x0001 +#define TRACE_SMAPI 0x0002 +#define TRACE_3780I 0x0004 +#define TRACE_TP3780I 0x0008 + +#ifdef MW_TRACE +#define PRINTK_1(f,s) \ + if (f & (mwave_debug)) { \ + printk(s); \ + } + +#define PRINTK_2(f,s,v1) \ + if (f & (mwave_debug)) { \ + printk(s,v1); \ + } + +#define PRINTK_3(f,s,v1,v2) \ + if (f & (mwave_debug)) { \ + printk(s,v1,v2); \ + } + +#define PRINTK_4(f,s,v1,v2,v3) \ + if (f & (mwave_debug)) { \ + printk(s,v1,v2,v3); \ + } + +#define PRINTK_5(f,s,v1,v2,v3,v4) \ + if (f & (mwave_debug)) { \ + printk(s,v1,v2,v3,v4); \ + } + +#define PRINTK_6(f,s,v1,v2,v3,v4,v5) \ + if (f & (mwave_debug)) { \ + printk(s,v1,v2,v3,v4,v5); \ + } + +#define PRINTK_7(f,s,v1,v2,v3,v4,v5,v6) \ + if (f & (mwave_debug)) { \ + printk(s,v1,v2,v3,v4,v5,v6); \ + } + +#define PRINTK_8(f,s,v1,v2,v3,v4,v5,v6,v7) \ + if (f & (mwave_debug)) { \ + printk(s,v1,v2,v3,v4,v5,v6,v7); \ + } + +#else +#define PRINTK_1(f,s) +#define PRINTK_2(f,s,v1) +#define PRINTK_3(f,s,v1,v2) +#define PRINTK_4(f,s,v1,v2,v3) +#define PRINTK_5(f,s,v1,v2,v3,v4) +#define PRINTK_6(f,s,v1,v2,v3,v4,v5) +#define PRINTK_7(f,s,v1,v2,v3,v4,v5,v6) +#define PRINTK_8(f,s,v1,v2,v3,v4,v5,v6,v7) +#endif + + +typedef struct _MWAVE_IPC { + unsigned short usIntCount; /* 0=none, 1=first, 2=greater than 1st */ + BOOLEAN bIsEnabled; + BOOLEAN bIsHere; + /* entry spin lock */ + wait_queue_head_t ipc_wait_queue; +} MWAVE_IPC; + +typedef struct _MWAVE_DEVICE_DATA { + THINKPAD_BD_DATA rBDData; /* board driver's data area */ + unsigned long ulIPCSource_ISR; /* IPC source bits for recently processed intr, set during ISR processing */ + unsigned long ulIPCSource_DPC; /* IPC source bits for recently processed intr, set during DPC processing */ + BOOLEAN bBDInitialized; + BOOLEAN bResourcesClaimed; + BOOLEAN bDSPEnabled; + BOOLEAN bDSPReset; + MWAVE_IPC IPCs[16]; + BOOLEAN bMwaveDevRegistered; + short sLine; + int nr_registered_attrs; + int device_registered; + +} MWAVE_DEVICE_DATA, *pMWAVE_DEVICE_DATA; + +#endif diff --git a/drivers/char/mwave/mwavepub.h b/drivers/char/mwave/mwavepub.h new file mode 100644 index 000000000000..f1f9da7a65c1 --- /dev/null +++ b/drivers/char/mwave/mwavepub.h @@ -0,0 +1,89 @@ +/* +* +* mwavepub.h -- PUBLIC declarations for the mwave driver +* and applications using it +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#ifndef _LINUX_MWAVEPUB_H +#define _LINUX_MWAVEPUB_H + +#include <linux/miscdevice.h> + + +typedef struct _MW_ABILITIES { + unsigned long instr_per_sec; + unsigned long data_size; + unsigned long inst_size; + unsigned long bus_dma_bw; + unsigned short uart_enable; + short component_count; + unsigned long component_list[7]; + char mwave_os_name[16]; + char bios_task_name[16]; +} MW_ABILITIES, *pMW_ABILITIES; + + +typedef struct _MW_READWRITE { + unsigned short usDspAddress; /* The dsp address */ + unsigned long ulDataLength; /* The size in bytes of the data or user buffer */ + void *pBuf; /* Input:variable sized buffer */ +} MW_READWRITE, *pMW_READWRITE; + +#define IOCTL_MW_RESET _IO(MWAVE_MINOR,1) +#define IOCTL_MW_RUN _IO(MWAVE_MINOR,2) +#define IOCTL_MW_DSP_ABILITIES _IOR(MWAVE_MINOR,3,MW_ABILITIES) +#define IOCTL_MW_READ_DATA _IOR(MWAVE_MINOR,4,MW_READWRITE) +#define IOCTL_MW_READCLEAR_DATA _IOR(MWAVE_MINOR,5,MW_READWRITE) +#define IOCTL_MW_READ_INST _IOR(MWAVE_MINOR,6,MW_READWRITE) +#define IOCTL_MW_WRITE_DATA _IOW(MWAVE_MINOR,7,MW_READWRITE) +#define IOCTL_MW_WRITE_INST _IOW(MWAVE_MINOR,8,MW_READWRITE) +#define IOCTL_MW_REGISTER_IPC _IOW(MWAVE_MINOR,9,int) +#define IOCTL_MW_UNREGISTER_IPC _IOW(MWAVE_MINOR,10,int) +#define IOCTL_MW_GET_IPC _IOW(MWAVE_MINOR,11,int) +#define IOCTL_MW_TRACE _IOR(MWAVE_MINOR,12,MW_READWRITE) + + +#endif diff --git a/drivers/char/mwave/smapi.c b/drivers/char/mwave/smapi.c new file mode 100644 index 000000000000..6187fd14b3fe --- /dev/null +++ b/drivers/char/mwave/smapi.c @@ -0,0 +1,570 @@ +/* +* +* smapi.c -- SMAPI interface routines +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#include <linux/kernel.h> +#include <linux/mc146818rtc.h> /* CMOS defines */ +#include "smapi.h" +#include "mwavedd.h" + +static unsigned short g_usSmapiPort = 0; + + +static int smapi_request(unsigned short inBX, unsigned short inCX, + unsigned short inDI, unsigned short inSI, + unsigned short *outAX, unsigned short *outBX, + unsigned short *outCX, unsigned short *outDX, + unsigned short *outDI, unsigned short *outSI) +{ + unsigned short myoutAX = 2, *pmyoutAX = &myoutAX; + unsigned short myoutBX = 3, *pmyoutBX = &myoutBX; + unsigned short myoutCX = 4, *pmyoutCX = &myoutCX; + unsigned short myoutDX = 5, *pmyoutDX = &myoutDX; + unsigned short myoutDI = 6, *pmyoutDI = &myoutDI; + unsigned short myoutSI = 7, *pmyoutSI = &myoutSI; + unsigned short usSmapiOK = -EIO, *pusSmapiOK = &usSmapiOK; + unsigned int inBXCX = (inBX << 16) | inCX; + unsigned int inDISI = (inDI << 16) | inSI; + int retval = 0; + + PRINTK_5(TRACE_SMAPI, "inBX %x inCX %x inDI %x inSI %x\n", + inBX, inCX, inDI, inSI); + + __asm__ __volatile__("movw $0x5380,%%ax\n\t" + "movl %7,%%ebx\n\t" + "shrl $16, %%ebx\n\t" + "movw %7,%%cx\n\t" + "movl %8,%%edi\n\t" + "shrl $16,%%edi\n\t" + "movw %8,%%si\n\t" + "movw %9,%%dx\n\t" + "out %%al,%%dx\n\t" + "out %%al,$0x4F\n\t" + "cmpb $0x53,%%ah\n\t" + "je 2f\n\t" + "1:\n\t" + "orb %%ah,%%ah\n\t" + "jnz 2f\n\t" + "movw %%ax,%0\n\t" + "movw %%bx,%1\n\t" + "movw %%cx,%2\n\t" + "movw %%dx,%3\n\t" + "movw %%di,%4\n\t" + "movw %%si,%5\n\t" + "movw $1,%6\n\t" + "2:\n\t":"=m"(*(unsigned short *) pmyoutAX), + "=m"(*(unsigned short *) pmyoutBX), + "=m"(*(unsigned short *) pmyoutCX), + "=m"(*(unsigned short *) pmyoutDX), + "=m"(*(unsigned short *) pmyoutDI), + "=m"(*(unsigned short *) pmyoutSI), + "=m"(*(unsigned short *) pusSmapiOK) + :"m"(inBXCX), "m"(inDISI), "m"(g_usSmapiPort) + :"%eax", "%ebx", "%ecx", "%edx", "%edi", + "%esi"); + + PRINTK_8(TRACE_SMAPI, + "myoutAX %x myoutBX %x myoutCX %x myoutDX %x myoutDI %x myoutSI %x usSmapiOK %x\n", + myoutAX, myoutBX, myoutCX, myoutDX, myoutDI, myoutSI, + usSmapiOK); + *outAX = myoutAX; + *outBX = myoutBX; + *outCX = myoutCX; + *outDX = myoutDX; + *outDI = myoutDI; + *outSI = myoutSI; + + retval = (usSmapiOK == 1) ? 0 : -EIO; + PRINTK_2(TRACE_SMAPI, "smapi::smapi_request exit retval %x\n", retval); + return retval; +} + + +int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings) +{ + int bRC = -EIO; + unsigned short usAX, usBX, usCX, usDX, usDI, usSI; + unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 }; + unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 }; + unsigned short numDspBases = 8; + unsigned short numUartBases = 4; + + PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg entry\n"); + + bRC = smapi_request(0x1802, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) { + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Error: Could not get DSP Settings. Aborting.\n"); + return bRC; + } + + PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n"); + + pSettings->bDSPPresent = ((usBX & 0x0100) != 0); + pSettings->bDSPEnabled = ((usCX & 0x0001) != 0); + pSettings->usDspIRQ = usSI & 0x00FF; + pSettings->usDspDMA = (usSI & 0xFF00) >> 8; + if ((usDI & 0x00FF) < numDspBases) { + pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF]; + } else { + pSettings->usDspBaseIO = 0; + } + PRINTK_6(TRACE_SMAPI, + "smapi::smapi_query_DSP_cfg get DSP Settings bDSPPresent %x bDSPEnabled %x usDspIRQ %x usDspDMA %x usDspBaseIO %x\n", + pSettings->bDSPPresent, pSettings->bDSPEnabled, + pSettings->usDspIRQ, pSettings->usDspDMA, + pSettings->usDspBaseIO); + + /* check for illegal values */ + if ( pSettings->usDspBaseIO == 0 ) + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP base I/O address is 0\n"); + if ( pSettings->usDspIRQ == 0 ) + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP IRQ line is 0\n"); + + bRC = smapi_request(0x1804, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) { + PRINTK_ERROR("smapi::smapi_query_DSP_cfg: Error: Could not get DSP modem settings. Aborting.\n"); + return bRC; + } + + PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n"); + + pSettings->bModemEnabled = ((usCX & 0x0001) != 0); + pSettings->usUartIRQ = usSI & 0x000F; + if (((usSI & 0xFF00) >> 8) < numUartBases) { + pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8]; + } else { + pSettings->usUartBaseIO = 0; + } + + PRINTK_4(TRACE_SMAPI, + "smapi::smapi_query_DSP_cfg get DSP modem settings bModemEnabled %x usUartIRQ %x usUartBaseIO %x\n", + pSettings->bModemEnabled, + pSettings->usUartIRQ, + pSettings->usUartBaseIO); + + /* check for illegal values */ + if ( pSettings->usUartBaseIO == 0 ) + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART base I/O address is 0\n"); + if ( pSettings->usUartIRQ == 0 ) + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART IRQ line is 0\n"); + + PRINTK_2(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg exit bRC %x\n", bRC); + + return bRC; +} + + +int smapi_set_DSP_cfg(void) +{ + int bRC = -EIO; + int i; + unsigned short usAX, usBX, usCX, usDX, usDI, usSI; + unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 }; + unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 }; + unsigned short ausDspIrqs[] = { 5, 7, 10, 11, 15 }; + unsigned short ausUartIrqs[] = { 3, 4 }; + + unsigned short numDspBases = 8; + unsigned short numUartBases = 4; + unsigned short numDspIrqs = 5; + unsigned short numUartIrqs = 2; + unsigned short dspio_index = 0, uartio_index = 0; + + PRINTK_5(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg entry mwave_3780i_irq %x mwave_3780i_io %x mwave_uart_irq %x mwave_uart_io %x\n", + mwave_3780i_irq, mwave_3780i_io, mwave_uart_irq, mwave_uart_io); + + if (mwave_3780i_io) { + for (i = 0; i < numDspBases; i++) { + if (mwave_3780i_io == ausDspBases[i]) + break; + } + if (i == numDspBases) { + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_io address %x. Aborting.\n", mwave_3780i_io); + return bRC; + } + dspio_index = i; + } + + if (mwave_3780i_irq) { + for (i = 0; i < numDspIrqs; i++) { + if (mwave_3780i_irq == ausDspIrqs[i]) + break; + } + if (i == numDspIrqs) { + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_irq %x. Aborting.\n", mwave_3780i_irq); + return bRC; + } + } + + if (mwave_uart_io) { + for (i = 0; i < numUartBases; i++) { + if (mwave_uart_io == ausUartBases[i]) + break; + } + if (i == numUartBases) { + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_io address %x. Aborting.\n", mwave_uart_io); + return bRC; + } + uartio_index = i; + } + + + if (mwave_uart_irq) { + for (i = 0; i < numUartIrqs; i++) { + if (mwave_uart_irq == ausUartIrqs[i]) + break; + } + if (i == numUartIrqs) { + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_irq %x. Aborting.\n", mwave_uart_irq); + return bRC; + } + } + + if (mwave_uart_irq || mwave_uart_io) { + + /* Check serial port A */ + bRC = smapi_request(0x1402, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + /* bRC == 0 */ + if (usBX & 0x0100) { /* serial port A is present */ + if (usCX & 1) { /* serial port is enabled */ + if ((usSI & 0xFF) == mwave_uart_irq) { +#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_ERROR(KERN_ERR_MWAVE + "smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq); +#else + PRINTK_3(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq); +#endif +#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_1(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg Disabling conflicting serial port\n"); + bRC = smapi_request(0x1403, 0x0100, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1402, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; +#else + goto exit_conflict; +#endif + } else { + if ((usSI >> 8) == uartio_index) { +#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_ERROR(KERN_ERR_MWAVE + "smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]); +#else + PRINTK_3(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]); +#endif +#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_1(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg Disabling conflicting serial port A\n"); + bRC = smapi_request (0x1403, 0x0100, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request (0x1402, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; +#else + goto exit_conflict; +#endif + } + } + } + } + + /* Check serial port B */ + bRC = smapi_request(0x1404, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + /* bRC == 0 */ + if (usBX & 0x0100) { /* serial port B is present */ + if (usCX & 1) { /* serial port is enabled */ + if ((usSI & 0xFF) == mwave_uart_irq) { +#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_ERROR(KERN_ERR_MWAVE + "smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq); +#else + PRINTK_3(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq); +#endif +#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_1(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n"); + bRC = smapi_request(0x1405, 0x0100, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1404, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; +#else + goto exit_conflict; +#endif + } else { + if ((usSI >> 8) == uartio_index) { +#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_ERROR(KERN_ERR_MWAVE + "smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]); +#else + PRINTK_3(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]); +#endif +#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_1 (TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n"); + bRC = smapi_request (0x1405, 0x0100, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request (0x1404, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; +#else + goto exit_conflict; +#endif + } + } + } + } + + /* Check IR port */ + bRC = smapi_request(0x1700, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1704, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + /* bRC == 0 */ + if ((usCX & 0xff) != 0xff) { /* IR port not disabled */ + if ((usCX & 0xff) == mwave_uart_irq) { +#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_ERROR(KERN_ERR_MWAVE + "smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq); +#else + PRINTK_3(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq); +#endif +#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_1(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n"); + bRC = smapi_request(0x1701, 0x0100, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1700, 0, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1705, 0x01ff, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1704, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; +#else + goto exit_conflict; +#endif + } else { + if ((usSI & 0xff) == uartio_index) { +#ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_ERROR(KERN_ERR_MWAVE + "smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]); +#else + PRINTK_3(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]); +#endif +#ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES + PRINTK_1(TRACE_SMAPI, + "smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n"); + bRC = smapi_request(0x1701, 0x0100, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1700, 0, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1705, 0x01ff, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + bRC = smapi_request(0x1704, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; +#else + goto exit_conflict; +#endif + } + } + } + } + + bRC = smapi_request(0x1802, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + + if (mwave_3780i_io) { + usDI = dspio_index; + } + if (mwave_3780i_irq) { + usSI = (usSI & 0xff00) | mwave_3780i_irq; + } + + bRC = smapi_request(0x1803, 0x0101, usDI, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + + bRC = smapi_request(0x1804, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + + if (mwave_uart_io) { + usSI = (usSI & 0x00ff) | (uartio_index << 8); + } + if (mwave_uart_irq) { + usSI = (usSI & 0xff00) | mwave_uart_irq; + } + bRC = smapi_request(0x1805, 0x0101, 0, usSI, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + + bRC = smapi_request(0x1802, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + + bRC = smapi_request(0x1804, 0x0000, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + if (bRC) goto exit_smapi_request_error; + +/* normal exit: */ + PRINTK_1(TRACE_SMAPI, "smapi::smapi_set_DSP_cfg exit\n"); + return 0; + +exit_conflict: + /* Message has already been printed */ + return -EIO; + +exit_smapi_request_error: + PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg exit on smapi_request error bRC %x\n", bRC); + return bRC; +} + + +int smapi_set_DSP_power_state(BOOLEAN bOn) +{ + int bRC = -EIO; + unsigned short usAX, usBX, usCX, usDX, usDI, usSI; + unsigned short usPowerFunction; + + PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state entry bOn %x\n", bOn); + + usPowerFunction = (bOn) ? 1 : 0; + + bRC = smapi_request(0x4901, 0x0000, 0, usPowerFunction, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + + PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state exit bRC %x\n", bRC); + + return bRC; +} + +#if 0 +static int SmapiQuerySystemID(void) +{ + int bRC = -EIO; + unsigned short usAX = 0xffff, usBX = 0xffff, usCX = 0xffff, + usDX = 0xffff, usDI = 0xffff, usSI = 0xffff; + + printk("smapi::SmapiQUerySystemID entry\n"); + bRC = smapi_request(0x0000, 0, 0, 0, + &usAX, &usBX, &usCX, &usDX, &usDI, &usSI); + + if (bRC == 0) { + printk("AX=%x, BX=%x, CX=%x, DX=%x, DI=%x, SI=%x\n", + usAX, usBX, usCX, usDX, usDI, usSI); + } else { + printk("smapi::SmapiQuerySystemID smapi_request error\n"); + } + + return bRC; +} +#endif /* 0 */ + +int smapi_init(void) +{ + int retval = -EIO; + unsigned short usSmapiID = 0; + unsigned long flags; + + PRINTK_1(TRACE_SMAPI, "smapi::smapi_init entry\n"); + + spin_lock_irqsave(&rtc_lock, flags); + usSmapiID = CMOS_READ(0x7C); + usSmapiID |= (CMOS_READ(0x7D) << 8); + spin_unlock_irqrestore(&rtc_lock, flags); + PRINTK_2(TRACE_SMAPI, "smapi::smapi_init usSmapiID %x\n", usSmapiID); + + if (usSmapiID == 0x5349) { + spin_lock_irqsave(&rtc_lock, flags); + g_usSmapiPort = CMOS_READ(0x7E); + g_usSmapiPort |= (CMOS_READ(0x7F) << 8); + spin_unlock_irqrestore(&rtc_lock, flags); + if (g_usSmapiPort == 0) { + PRINTK_ERROR("smapi::smapi_init, ERROR unable to read from SMAPI port\n"); + } else { + PRINTK_2(TRACE_SMAPI, + "smapi::smapi_init, exit TRUE g_usSmapiPort %x\n", + g_usSmapiPort); + retval = 0; + //SmapiQuerySystemID(); + } + } else { + PRINTK_ERROR("smapi::smapi_init, ERROR invalid usSmapiID\n"); + retval = -ENXIO; + } + + return retval; +} diff --git a/drivers/char/mwave/smapi.h b/drivers/char/mwave/smapi.h new file mode 100644 index 000000000000..64b2ec1420e3 --- /dev/null +++ b/drivers/char/mwave/smapi.h @@ -0,0 +1,80 @@ +/* +* +* smapi.h -- declarations for SMAPI interface routines +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#ifndef _LINUX_SMAPI_H +#define _LINUX_SMAPI_H + +#define TRUE 1 +#define FALSE 0 +#define BOOLEAN int + +typedef struct { + int bDSPPresent; + int bDSPEnabled; + int bModemEnabled; + int bMIDIEnabled; + int bSblstEnabled; + unsigned short usDspIRQ; + unsigned short usDspDMA; + unsigned short usDspBaseIO; + unsigned short usUartIRQ; + unsigned short usUartBaseIO; + unsigned short usMidiIRQ; + unsigned short usMidiBaseIO; + unsigned short usSndblstIRQ; + unsigned short usSndblstDMA; + unsigned short usSndblstBaseIO; +} SMAPI_DSP_SETTINGS; + +int smapi_init(void); +int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings); +int smapi_set_DSP_cfg(void); +int smapi_set_DSP_power_state(BOOLEAN bOn); + + +#endif diff --git a/drivers/char/mwave/tp3780i.c b/drivers/char/mwave/tp3780i.c new file mode 100644 index 000000000000..ab650cd6efc0 --- /dev/null +++ b/drivers/char/mwave/tp3780i.c @@ -0,0 +1,592 @@ +/* +* +* tp3780i.c -- board driver for 3780i on ThinkPads +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#include <linux/version.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include "smapi.h" +#include "mwavedd.h" +#include "tp3780i.h" +#include "3780i.h" +#include "mwavepub.h" + +extern MWAVE_DEVICE_DATA mwave_s_mdd; + +static unsigned short s_ausThinkpadIrqToField[16] = + { 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004, + 0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 }; +static unsigned short s_ausThinkpadDmaToField[8] = + { 0x0001, 0x0002, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0003, 0x0004 }; +static unsigned short s_numIrqs = 16, s_numDmas = 8; + + +static void EnableSRAM(THINKPAD_BD_DATA * pBDData) +{ + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + DSP_GPIO_OUTPUT_DATA_15_8 rGpioOutputData; + DSP_GPIO_DRIVER_ENABLE_15_8 rGpioDriverEnable; + DSP_GPIO_MODE_15_8 rGpioMode; + + PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM, entry\n"); + + MKWORD(rGpioMode) = ReadMsaCfg(DSP_GpioModeControl_15_8); + rGpioMode.GpioMode10 = 0; + WriteMsaCfg(DSP_GpioModeControl_15_8, MKWORD(rGpioMode)); + + MKWORD(rGpioDriverEnable) = 0; + rGpioDriverEnable.Enable10 = TRUE; + rGpioDriverEnable.Mask10 = TRUE; + WriteMsaCfg(DSP_GpioDriverEnable_15_8, MKWORD(rGpioDriverEnable)); + + MKWORD(rGpioOutputData) = 0; + rGpioOutputData.Latch10 = 0; + rGpioOutputData.Mask10 = TRUE; + WriteMsaCfg(DSP_GpioOutputData_15_8, MKWORD(rGpioOutputData)); + + PRINTK_1(TRACE_TP3780I, "tp3780i::EnableSRAM exit\n"); +} + + +static irqreturn_t UartInterrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + PRINTK_3(TRACE_TP3780I, + "tp3780i::UartInterrupt entry irq %x dev_id %p\n", irq, dev_id); + return IRQ_HANDLED; +} + +static irqreturn_t DspInterrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pDrvData->rBDData.rDspSettings; + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + unsigned short usIPCSource = 0, usIsolationMask, usPCNum; + + PRINTK_3(TRACE_TP3780I, + "tp3780i::DspInterrupt entry irq %x dev_id %p\n", irq, dev_id); + + if (dsp3780I_GetIPCSource(usDspBaseIO, &usIPCSource) == 0) { + PRINTK_2(TRACE_TP3780I, + "tp3780i::DspInterrupt, return from dsp3780i_GetIPCSource, usIPCSource %x\n", + usIPCSource); + usIsolationMask = 1; + for (usPCNum = 1; usPCNum <= 16; usPCNum++) { + if (usIPCSource & usIsolationMask) { + usIPCSource &= ~usIsolationMask; + PRINTK_3(TRACE_TP3780I, + "tp3780i::DspInterrupt usPCNum %x usIPCSource %x\n", + usPCNum, usIPCSource); + if (pDrvData->IPCs[usPCNum - 1].usIntCount == 0) { + pDrvData->IPCs[usPCNum - 1].usIntCount = 1; + } + PRINTK_2(TRACE_TP3780I, + "tp3780i::DspInterrupt usIntCount %x\n", + pDrvData->IPCs[usPCNum - 1].usIntCount); + if (pDrvData->IPCs[usPCNum - 1].bIsEnabled == TRUE) { + PRINTK_2(TRACE_TP3780I, + "tp3780i::DspInterrupt, waking up usPCNum %x\n", + usPCNum - 1); + wake_up_interruptible(&pDrvData->IPCs[usPCNum - 1].ipc_wait_queue); + } else { + PRINTK_2(TRACE_TP3780I, + "tp3780i::DspInterrupt, no one waiting for IPC %x\n", + usPCNum - 1); + } + } + if (usIPCSource == 0) + break; + /* try next IPC */ + usIsolationMask = usIsolationMask << 1; + } + } else { + PRINTK_1(TRACE_TP3780I, + "tp3780i::DspInterrupt, return false from dsp3780i_GetIPCSource\n"); + } + PRINTK_1(TRACE_TP3780I, "tp3780i::DspInterrupt exit\n"); + return IRQ_HANDLED; +} + + +int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData entry pBDData %p\n", pBDData); + + pBDData->bDSPEnabled = FALSE; + pSettings->bInterruptClaimed = FALSE; + + retval = smapi_init(); + if (retval) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine\n"); + } else { + if (mwave_3780i_irq || mwave_3780i_io || mwave_uart_irq || mwave_uart_io) { + retval = smapi_set_DSP_cfg(); + } + } + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData exit retval %x\n", retval); + + return retval; +} + +int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_Cleanup entry and exit pBDData %p\n", pBDData); + + return retval; +} + +int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData) +{ + SMAPI_DSP_SETTINGS rSmapiInfo; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_CalcResources entry pBDData %p\n", pBDData); + + if (smapi_query_DSP_cfg(&rSmapiInfo)) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting.\n"); + return -EIO; + } + + /* Sanity check */ + if ( + ( rSmapiInfo.usDspIRQ == 0 ) + || ( rSmapiInfo.usDspBaseIO == 0 ) + || ( rSmapiInfo.usUartIRQ == 0 ) + || ( rSmapiInfo.usUartBaseIO == 0 ) + ) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Illegal resource setting. Aborting.\n"); + return -EIO; + } + + pSettings->bDSPEnabled = (rSmapiInfo.bDSPEnabled && rSmapiInfo.bDSPPresent); + pSettings->bModemEnabled = rSmapiInfo.bModemEnabled; + pSettings->usDspIrq = rSmapiInfo.usDspIRQ; + pSettings->usDspDma = rSmapiInfo.usDspDMA; + pSettings->usDspBaseIO = rSmapiInfo.usDspBaseIO; + pSettings->usUartIrq = rSmapiInfo.usUartIRQ; + pSettings->usUartBaseIO = rSmapiInfo.usUartBaseIO; + + pSettings->uDStoreSize = TP_ABILITIES_DATA_SIZE; + pSettings->uIStoreSize = TP_ABILITIES_INST_SIZE; + pSettings->uIps = TP_ABILITIES_INTS_PER_SEC; + + if (pSettings->bDSPEnabled && pSettings->bModemEnabled && pSettings->usDspIrq == pSettings->usUartIrq) { + pBDData->bShareDspIrq = pBDData->bShareUartIrq = 1; + } else { + pBDData->bShareDspIrq = pBDData->bShareUartIrq = 0; + } + + PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_CalcResources exit\n"); + + return 0; +} + + +int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) + struct resource *pres; +#endif + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_ClaimResources entry pBDData %p\n", pBDData); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) + pres = request_region(pSettings->usDspBaseIO, 16, "mwave_3780i"); + if ( pres == NULL ) retval = -EIO; +#else + retval = check_region(pSettings->usDspBaseIO, 16); + if (!retval) request_region(pSettings->usDspBaseIO, 16, "mwave_3780i"); +#endif + if (retval) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_ClaimResources: Error: Could not claim I/O region starting at %x\n", pSettings->usDspBaseIO); + retval = -EIO; + } + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ClaimResources exit retval %x\n", retval); + + return retval; +} + +int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_ReleaseResources entry pBDData %p\n", pBDData); + + release_region(pSettings->usDspBaseIO & (~3), 16); + + if (pSettings->bInterruptClaimed) { + free_irq(pSettings->usDspIrq, NULL); + pSettings->bInterruptClaimed = FALSE; + } + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_ReleaseResources exit retval %x\n", retval); + + return retval; +} + + + +int tp3780I_EnableDSP(THINKPAD_BD_DATA * pBDData) +{ + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + BOOLEAN bDSPPoweredUp = FALSE, bDSPEnabled = FALSE, bInterruptAllocated = FALSE; + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP entry pBDData %p\n", pBDData); + + if (pBDData->bDSPEnabled) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: DSP already enabled!\n"); + goto exit_cleanup; + } + + if (!pSettings->bDSPEnabled) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780::tp3780I_EnableDSP: Error: pSettings->bDSPEnabled not set\n"); + goto exit_cleanup; + } + + if ( + (pSettings->usDspIrq >= s_numIrqs) + || (pSettings->usDspDma >= s_numDmas) + || (s_ausThinkpadIrqToField[pSettings->usDspIrq] == 0xFFFF) + || (s_ausThinkpadDmaToField[pSettings->usDspDma] == 0xFFFF) + ) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: invalid irq %x\n", pSettings->usDspIrq); + goto exit_cleanup; + } + + if ( + ((pSettings->usDspBaseIO & 0xF00F) != 0) + || (pSettings->usDspBaseIO & 0x0FF0) == 0 + ) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid DSP base I/O address %x\n", pSettings->usDspBaseIO); + goto exit_cleanup; + } + + if (pSettings->bModemEnabled) { + if ( + pSettings->usUartIrq >= s_numIrqs + || s_ausThinkpadIrqToField[pSettings->usUartIrq] == 0xFFFF + ) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Invalid UART IRQ %x\n", pSettings->usUartIrq); + goto exit_cleanup; + } + switch (pSettings->usUartBaseIO) { + case 0x03F8: + case 0x02F8: + case 0x03E8: + case 0x02E8: + break; + + default: + PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Invalid UART base I/O address %x\n", pSettings->usUartBaseIO); + goto exit_cleanup; + } + } + + pSettings->bDspIrqActiveLow = pSettings->bDspIrqPulse = TRUE; + pSettings->bUartIrqActiveLow = pSettings->bUartIrqPulse = TRUE; + + if (pBDData->bShareDspIrq) { + pSettings->bDspIrqActiveLow = FALSE; + } + if (pBDData->bShareUartIrq) { + pSettings->bUartIrqActiveLow = FALSE; + } + + pSettings->usNumTransfers = TP_CFG_NumTransfers; + pSettings->usReRequest = TP_CFG_RerequestTimer; + pSettings->bEnableMEMCS16 = TP_CFG_MEMCS16; + pSettings->usIsaMemCmdWidth = TP_CFG_IsaMemCmdWidth; + pSettings->bGateIOCHRDY = TP_CFG_GateIOCHRDY; + pSettings->bEnablePwrMgmt = TP_CFG_EnablePwrMgmt; + pSettings->usHBusTimerLoadValue = TP_CFG_HBusTimerValue; + pSettings->bDisableLBusTimeout = TP_CFG_DisableLBusTimeout; + pSettings->usN_Divisor = TP_CFG_N_Divisor; + pSettings->usM_Multiplier = TP_CFG_M_Multiplier; + pSettings->bPllBypass = TP_CFG_PllBypass; + pSettings->usChipletEnable = TP_CFG_ChipletEnable; + + if (request_irq(pSettings->usUartIrq, &UartInterrupt, 0, "mwave_uart", NULL)) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: Could not get UART IRQ %x\n", pSettings->usUartIrq); + goto exit_cleanup; + } else { /* no conflict just release */ + free_irq(pSettings->usUartIrq, NULL); + } + + if (request_irq(pSettings->usDspIrq, &DspInterrupt, 0, "mwave_3780i", NULL)) { + PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: Could not get 3780i IRQ %x\n", pSettings->usDspIrq); + goto exit_cleanup; + } else { + PRINTK_3(TRACE_TP3780I, + "tp3780i::tp3780I_EnableDSP, got interrupt %x bShareDspIrq %x\n", + pSettings->usDspIrq, pBDData->bShareDspIrq); + bInterruptAllocated = TRUE; + pSettings->bInterruptClaimed = TRUE; + } + + smapi_set_DSP_power_state(FALSE); + if (smapi_set_DSP_power_state(TRUE)) { + PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_EnableDSP: Error: smapi_set_DSP_power_state(TRUE) failed\n"); + goto exit_cleanup; + } else { + bDSPPoweredUp = TRUE; + } + + if (dsp3780I_EnableDSP(pSettings, s_ausThinkpadIrqToField, s_ausThinkpadDmaToField)) { + PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Error: dsp7880I_EnableDSP() failed\n"); + goto exit_cleanup; + } else { + bDSPEnabled = TRUE; + } + + EnableSRAM(pBDData); + + pBDData->bDSPEnabled = TRUE; + + PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_EnableDSP exit\n"); + + return 0; + +exit_cleanup: + PRINTK_ERROR("tp3780i::tp3780I_EnableDSP: Cleaning up\n"); + if (bDSPEnabled) + dsp3780I_DisableDSP(pSettings); + if (bDSPPoweredUp) + smapi_set_DSP_power_state(FALSE); + if (bInterruptAllocated) { + free_irq(pSettings->usDspIrq, NULL); + pSettings->bInterruptClaimed = FALSE; + } + return -EIO; +} + + +int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP entry pBDData %p\n", pBDData); + + if (pBDData->bDSPEnabled) { + dsp3780I_DisableDSP(&pBDData->rDspSettings); + if (pSettings->bInterruptClaimed) { + free_irq(pSettings->usDspIrq, NULL); + pSettings->bInterruptClaimed = FALSE; + } + smapi_set_DSP_power_state(FALSE); + pBDData->bDSPEnabled = FALSE; + } + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP exit retval %x\n", retval); + + return retval; +} + + +int tp3780I_ResetDSP(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP entry pBDData %p\n", + pBDData); + + if (dsp3780I_Reset(pSettings) == 0) { + EnableSRAM(pBDData); + } else { + retval = -EIO; + } + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ResetDSP exit retval %x\n", retval); + + return retval; +} + + +int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP entry pBDData %p\n", pBDData); + + if (dsp3780I_Run(pSettings) == 0) { + // @BUG @TBD EnableSRAM(pBDData); + } else { + retval = -EIO; + } + + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP exit retval %x\n", retval); + + return retval; +} + + +int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities) +{ + int retval = 0; + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_QueryAbilities entry pBDData %p\n", pBDData); + + /* fill out standard constant fields */ + pAbilities->instr_per_sec = pBDData->rDspSettings.uIps; + pAbilities->data_size = pBDData->rDspSettings.uDStoreSize; + pAbilities->inst_size = pBDData->rDspSettings.uIStoreSize; + pAbilities->bus_dma_bw = pBDData->rDspSettings.uDmaBandwidth; + + /* fill out dynamically determined fields */ + pAbilities->component_list[0] = 0x00010000 | MW_ADC_MASK; + pAbilities->component_list[1] = 0x00010000 | MW_ACI_MASK; + pAbilities->component_list[2] = 0x00010000 | MW_AIC1_MASK; + pAbilities->component_list[3] = 0x00010000 | MW_AIC2_MASK; + pAbilities->component_list[4] = 0x00010000 | MW_CDDAC_MASK; + pAbilities->component_list[5] = 0x00010000 | MW_MIDI_MASK; + pAbilities->component_list[6] = 0x00010000 | MW_UART_MASK; + pAbilities->component_count = 7; + + /* Fill out Mwave OS and BIOS task names */ + + memcpy(pAbilities->mwave_os_name, TP_ABILITIES_MWAVEOS_NAME, + sizeof(TP_ABILITIES_MWAVEOS_NAME)); + memcpy(pAbilities->bios_task_name, TP_ABILITIES_BIOSTASK_NAME, + sizeof(TP_ABILITIES_BIOSTASK_NAME)); + + PRINTK_1(TRACE_TP3780I, + "tp3780i::tp3780I_QueryAbilities exit retval=SUCCESSFUL\n"); + + return retval; +} + +int tp3780I_ReadWriteDspDStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode, + void __user *pvBuffer, unsigned int uCount, + unsigned long ulDSPAddr) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + BOOLEAN bRC = 0; + + PRINTK_6(TRACE_TP3780I, + "tp3780i::tp3780I_ReadWriteDspDStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n", + pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr); + + if (pBDData->bDSPEnabled) { + switch (uOpcode) { + case IOCTL_MW_READ_DATA: + bRC = dsp3780I_ReadDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); + break; + + case IOCTL_MW_READCLEAR_DATA: + bRC = dsp3780I_ReadAndClearDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); + break; + + case IOCTL_MW_WRITE_DATA: + bRC = dsp3780I_WriteDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); + break; + } + } + + retval = (bRC) ? -EIO : 0; + PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ReadWriteDspDStore exit retval %x\n", retval); + + return retval; +} + + +int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode, + void __user *pvBuffer, unsigned int uCount, + unsigned long ulDSPAddr) +{ + int retval = 0; + DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings; + unsigned short usDspBaseIO = pSettings->usDspBaseIO; + BOOLEAN bRC = 0; + + PRINTK_6(TRACE_TP3780I, + "tp3780i::tp3780I_ReadWriteDspIStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n", + pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr); + + if (pBDData->bDSPEnabled) { + switch (uOpcode) { + case IOCTL_MW_READ_INST: + bRC = dsp3780I_ReadIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); + break; + + case IOCTL_MW_WRITE_INST: + bRC = dsp3780I_WriteIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr); + break; + } + } + + retval = (bRC) ? -EIO : 0; + + PRINTK_2(TRACE_TP3780I, + "tp3780i::tp3780I_ReadWriteDspIStore exit retval %x\n", retval); + + return retval; +} + diff --git a/drivers/char/mwave/tp3780i.h b/drivers/char/mwave/tp3780i.h new file mode 100644 index 000000000000..07685b68538f --- /dev/null +++ b/drivers/char/mwave/tp3780i.h @@ -0,0 +1,103 @@ +/* +* +* tp3780i.h -- declarations for tp3780i.c +* +* +* Written By: Mike Sullivan IBM Corporation +* +* Copyright (C) 1999 IBM Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* NO WARRANTY +* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +* solely responsible for determining the appropriateness of using and +* distributing the Program and assumes all risks associated with its +* exercise of rights under this Agreement, including but not limited to +* the risks and costs of program errors, damage to or loss of data, +* programs or equipment, and unavailability or interruption of operations. +* +* DISCLAIMER OF LIABILITY +* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* 10/23/2000 - Alpha Release +* First release to the public +*/ + +#ifndef _LINUX_TP3780I_H +#define _LINUX_TP3780I_H + +#include <asm/io.h> +#include "mwavepub.h" + + +/* DSP abilities constants for 3780i based Thinkpads */ +#define TP_ABILITIES_INTS_PER_SEC 39160800 +#define TP_ABILITIES_DATA_SIZE 32768 +#define TP_ABILITIES_INST_SIZE 32768 +#define TP_ABILITIES_MWAVEOS_NAME "mwaveos0700.dsp" +#define TP_ABILITIES_BIOSTASK_NAME "mwbio701.dsp" + + +/* DSP configuration values for 3780i based Thinkpads */ +#define TP_CFG_NumTransfers 3 /* 16 transfers */ +#define TP_CFG_RerequestTimer 1 /* 2 usec */ +#define TP_CFG_MEMCS16 0 /* Disabled, 16-bit memory assumed */ +#define TP_CFG_IsaMemCmdWidth 3 /* 295 nsec (16-bit) */ +#define TP_CFG_GateIOCHRDY 0 /* No IOCHRDY gating */ +#define TP_CFG_EnablePwrMgmt 1 /* Enable low poser suspend/resume */ +#define TP_CFG_HBusTimerValue 255 /* HBus timer load value */ +#define TP_CFG_DisableLBusTimeout 0 /* Enable LBus timeout */ +#define TP_CFG_N_Divisor 32 /* Clock = 39.1608 Mhz */ +#define TP_CFG_M_Multiplier 37 /* " */ +#define TP_CFG_PllBypass 0 /* don't bypass */ +#define TP_CFG_ChipletEnable 0xFFFF /* Enable all chiplets */ + +typedef struct { + int bDSPEnabled; + int bShareDspIrq; + int bShareUartIrq; + DSP_3780I_CONFIG_SETTINGS rDspSettings; +} THINKPAD_BD_DATA; + +int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData); +int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData); +int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData); +int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData); +int tp3780I_EnableDSP(THINKPAD_BD_DATA * pBDData); +int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData); +int tp3780I_ResetDSP(THINKPAD_BD_DATA * pBDData); +int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData); +int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities); +int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData); +int tp3780I_ReadWriteDspDStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode, + void __user *pvBuffer, unsigned int uCount, + unsigned long ulDSPAddr); +int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode, + void __user *pvBuffer, unsigned int uCount, + unsigned long ulDSPAddr); + + +#endif |
