diff options
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bluetooth/btbcm.c | 6 | ||||
| -rw-r--r-- | drivers/bluetooth/btintel.c | 6 | ||||
| -rw-r--r-- | drivers/bluetooth/btmrvl_sdio.c | 2 | ||||
| -rw-r--r-- | drivers/bluetooth/btrtl.c | 390 | ||||
| -rw-r--r-- | drivers/bluetooth/btrtl.h | 52 | ||||
| -rw-r--r-- | drivers/bluetooth/btusb.c | 434 | ||||
| -rw-r--r-- | drivers/bluetooth/btwilink.c | 2 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_bcsp.c | 4 |
10 files changed, 485 insertions, 427 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index ed5c2738bea2..2e777071e1dc 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -9,6 +9,10 @@ config BT_BCM tristate select FW_LOADER +config BT_RTL + tristate + select FW_LOADER + config BT_HCIBTUSB tristate "HCI USB driver" depends on USB @@ -32,6 +36,17 @@ config BT_HCIBTUSB_BCM Say Y here to compile support for Broadcom protocol. +config BT_HCIBTUSB_RTL + bool "Realtek protocol support" + depends on BT_HCIBTUSB + select BT_RTL + default y + help + The Realtek protocol support enables firmware and configuration + download support for Realtek Bluetooth controllers. + + Say Y here to compile support for Realtek protocol. + config BT_HCIBTSDIO tristate "HCI SDIO driver" depends on MMC diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index dd0d9c40b999..f40e194e7080 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o obj-$(CONFIG_BT_WILINK) += btwilink.o obj-$(CONFIG_BT_BCM) += btbcm.o +obj-$(CONFIG_BT_RTL) += btrtl.o btmrvl-y := btmrvl_main.o btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 4bba86677adc..728fce38a5a2 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -55,12 +55,6 @@ int btbcm_check_bdaddr(struct hci_dev *hdev) } bda = (struct hci_rp_read_bd_addr *)skb->data; - if (bda->status) { - BT_ERR("%s: BCM: Device address result failed (%02x)", - hdev->name, bda->status); - kfree_skb(skb); - return -bt_to_errno(bda->status); - } /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller * with no configured address. diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c index 2d43d4279b00..828f2f8d1568 100644 --- a/drivers/bluetooth/btintel.c +++ b/drivers/bluetooth/btintel.c @@ -53,12 +53,6 @@ int btintel_check_bdaddr(struct hci_dev *hdev) } bda = (struct hci_rp_read_bd_addr *)skb->data; - if (bda->status) { - BT_ERR("%s: Intel device address result failed (%02x)", - hdev->name, bda->status); - kfree_skb(skb); - return -bt_to_errno(bda->status); - } /* For some Intel based controllers, the default Bluetooth device * address 00:03:19:9E:8B:00 can be found. These controllers are diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 01d6da577eeb..b9a811900f6a 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -1217,7 +1217,7 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv) unsigned int reg, reg_start, reg_end; enum rdwr_status stat; u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr; - u8 dump_num, idx, i, read_reg, doneflag = 0; + u8 dump_num = 0, idx, i, read_reg, doneflag = 0; u32 memory_size, fw_dump_len = 0; /* dump sdio register first */ diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c new file mode 100644 index 000000000000..84288938f7f2 --- /dev/null +++ b/drivers/bluetooth/btrtl.c @@ -0,0 +1,390 @@ +/* + * Bluetooth support for Realtek devices + * + * Copyright (C) 2015 Endless Mobile, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/firmware.h> +#include <asm/unaligned.h> +#include <linux/usb.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btrtl.h" + +#define VERSION "0.1" + +#define RTL_EPATCH_SIGNATURE "Realtech" +#define RTL_ROM_LMP_3499 0x3499 +#define RTL_ROM_LMP_8723A 0x1200 +#define RTL_ROM_LMP_8723B 0x8723 +#define RTL_ROM_LMP_8821A 0x8821 +#define RTL_ROM_LMP_8761A 0x8761 + +static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) +{ + struct rtl_rom_version_evt *rom_version; + struct sk_buff *skb; + + /* Read RTL ROM version command */ + skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Read ROM version failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*rom_version)) { + BT_ERR("%s: RTL version event length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } + + rom_version = (struct rtl_rom_version_evt *)skb->data; + BT_INFO("%s: rom_version status=%x version=%x", + hdev->name, rom_version->status, rom_version->version); + + *version = rom_version->version; + + kfree_skb(skb); + return 0; +} + +static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, + const struct firmware *fw, + unsigned char **_buf) +{ + const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; + struct rtl_epatch_header *epatch_info; + unsigned char *buf; + int i, ret, len; + size_t min_size; + u8 opcode, length, data, rom_version = 0; + int project_id = -1; + const unsigned char *fwptr, *chip_id_base; + const unsigned char *patch_length_base, *patch_offset_base; + u32 patch_offset = 0; + u16 patch_length, num_patches; + const u16 project_id_to_lmp_subver[] = { + RTL_ROM_LMP_8723A, + RTL_ROM_LMP_8723B, + RTL_ROM_LMP_8821A, + RTL_ROM_LMP_8761A + }; + + ret = rtl_read_rom_version(hdev, &rom_version); + if (ret) + return ret; + + min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; + if (fw->size < min_size) + return -EINVAL; + + fwptr = fw->data + fw->size - sizeof(extension_sig); + if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { + BT_ERR("%s: extension section signature mismatch", hdev->name); + return -EINVAL; + } + + /* Loop from the end of the firmware parsing instructions, until + * we find an instruction that identifies the "project ID" for the + * hardware supported by this firwmare file. + * Once we have that, we double-check that that project_id is suitable + * for the hardware we are working with. + */ + while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { + opcode = *--fwptr; + length = *--fwptr; + data = *--fwptr; + + BT_DBG("check op=%x len=%x data=%x", opcode, length, data); + + if (opcode == 0xff) /* EOF */ + break; + + if (length == 0) { + BT_ERR("%s: found instruction with length 0", + hdev->name); + return -EINVAL; + } + + if (opcode == 0 && length == 1) { + project_id = data; + break; + } + + fwptr -= length; + } + + if (project_id < 0) { + BT_ERR("%s: failed to find version instruction", hdev->name); + return -EINVAL; + } + + if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) { + BT_ERR("%s: unknown project id %d", hdev->name, project_id); + return -EINVAL; + } + + if (lmp_subver != project_id_to_lmp_subver[project_id]) { + BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, + project_id_to_lmp_subver[project_id], lmp_subver); + return -EINVAL; + } + + epatch_info = (struct rtl_epatch_header *)fw->data; + if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { + BT_ERR("%s: bad EPATCH signature", hdev->name); + return -EINVAL; + } + + num_patches = le16_to_cpu(epatch_info->num_patches); + BT_DBG("fw_version=%x, num_patches=%d", + le32_to_cpu(epatch_info->fw_version), num_patches); + + /* After the rtl_epatch_header there is a funky patch metadata section. + * Assuming 2 patches, the layout is: + * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 + * + * Find the right patch for this chip. + */ + min_size += 8 * num_patches; + if (fw->size < min_size) + return -EINVAL; + + chip_id_base = fw->data + sizeof(struct rtl_epatch_header); + patch_length_base = chip_id_base + (sizeof(u16) * num_patches); + patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); + for (i = 0; i < num_patches; i++) { + u16 chip_id = get_unaligned_le16(chip_id_base + + (i * sizeof(u16))); + if (chip_id == rom_version + 1) { + patch_length = get_unaligned_le16(patch_length_base + + (i * sizeof(u16))); + patch_offset = get_unaligned_le32(patch_offset_base + + (i * sizeof(u32))); + break; + } + } + + if (!patch_offset) { + BT_ERR("%s: didn't find patch for chip id %d", + hdev->name, rom_version); + return -EINVAL; + } + + BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); + min_size = patch_offset + patch_length; + if (fw->size < min_size) + return -EINVAL; + + /* Copy the firmware into a new buffer and write the version at + * the end. + */ + len = patch_length; + buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); + + *_buf = buf; + return len; +} + +static int rtl_download_firmware(struct hci_dev *hdev, + const unsigned char *data, int fw_len) +{ + struct rtl_download_cmd *dl_cmd; + int frag_num = fw_len / RTL_FRAG_LEN + 1; + int frag_len = RTL_FRAG_LEN; + int ret = 0; + int i; + + dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); + if (!dl_cmd) + return -ENOMEM; + + for (i = 0; i < frag_num; i++) { + struct sk_buff *skb; + + BT_DBG("download fw (%d/%d)", i, frag_num); + + dl_cmd->index = i; + if (i == (frag_num - 1)) { + dl_cmd->index |= 0x80; /* data end */ + frag_len = fw_len % RTL_FRAG_LEN; + } + memcpy(dl_cmd->data, data, frag_len); + + /* Send download command */ + skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: download fw command failed (%ld)", + hdev->name, PTR_ERR(skb)); + ret = -PTR_ERR(skb); + goto out; + } + + if (skb->len != sizeof(struct rtl_download_response)) { + BT_ERR("%s: download fw event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto out; + } + + kfree_skb(skb); + data += RTL_FRAG_LEN; + } + +out: + kfree(dl_cmd); + return ret; +} + +static int btrtl_setup_rtl8723a(struct hci_dev *hdev) +{ + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name); + ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name); + return ret; + } + + if (fw->size < 8) { + ret = -EINVAL; + goto out; + } + + /* Check that the firmware doesn't have the epatch signature + * (which is only for RTL8723B and newer). + */ + if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { + BT_ERR("%s: unexpected EPATCH signature!", hdev->name); + ret = -EINVAL; + goto out; + } + + ret = rtl_download_firmware(hdev, fw->data, fw->size); + +out: + release_firmware(fw); + return ret; +} + +static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, + const char *fw_name) +{ + unsigned char *fw_data = NULL; + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); + ret = request_firmware(&fw, fw_name, &hdev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load %s", hdev->name, fw_name); + return ret; + } + + ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); + if (ret < 0) + goto out; + + ret = rtl_download_firmware(hdev, fw_data, ret); + kfree(fw_data); + if (ret < 0) + goto out; + +out: + release_firmware(fw); + return ret; +} + +static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", + hdev->name, PTR_ERR(skb)); + return skb; + } + + if (skb->len != sizeof(struct hci_rp_read_local_version)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", + hdev->name); + kfree_skb(skb); + return ERR_PTR(-EIO); + } + + return skb; +} + +int btrtl_setup_realtek(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct hci_rp_read_local_version *resp; + u16 lmp_subver; + + skb = btrtl_read_local_version(hdev); + if (IS_ERR(skb)) + return -PTR_ERR(skb); + + resp = (struct hci_rp_read_local_version *)skb->data; + BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, + resp->lmp_ver, resp->lmp_subver); + + lmp_subver = le16_to_cpu(resp->lmp_subver); + kfree_skb(skb); + + /* Match a set of subver values that correspond to stock firmware, + * which is not compatible with standard btusb. + * If matched, upload an alternative firmware that does conform to + * standard btusb. Once that firmware is uploaded, the subver changes + * to a different value. + */ + switch (lmp_subver) { + case RTL_ROM_LMP_8723A: + case RTL_ROM_LMP_3499: + return btrtl_setup_rtl8723a(hdev); + case RTL_ROM_LMP_8723B: + return btrtl_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8723b_fw.bin"); + case RTL_ROM_LMP_8821A: + return btrtl_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8821a_fw.bin"); + case RTL_ROM_LMP_8761A: + return btrtl_setup_rtl8723b(hdev, lmp_subver, + "rtl_bt/rtl8761a_fw.bin"); + default: + BT_INFO("rtl: assuming no firmware upload needed."); + return 0; + } +} +EXPORT_SYMBOL_GPL(btrtl_setup_realtek); + +MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>"); +MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h new file mode 100644 index 000000000000..38ffe4890cd1 --- /dev/null +++ b/drivers/bluetooth/btrtl.h @@ -0,0 +1,52 @@ +/* + * Bluetooth support for Realtek devices + * + * Copyright (C) 2015 Endless Mobile, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define RTL_FRAG_LEN 252 + +struct rtl_download_cmd { + __u8 index; + __u8 data[RTL_FRAG_LEN]; +} __packed; + +struct rtl_download_response { + __u8 status; + __u8 index; +} __packed; + +struct rtl_rom_version_evt { + __u8 status; + __u8 version; +} __packed; + +struct rtl_epatch_header { + __u8 signature[8]; + __le32 fw_version; + __le16 num_patches; +} __packed; + +#if IS_ENABLED(CONFIG_BT_RTL) + +int btrtl_setup_realtek(struct hci_dev *hdev); + +#else + +static inline int btrtl_setup_realtek(struct hci_dev *hdev) +{ + return -EOPNOTSUPP; +} + +#endif diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3c10d4dfe9a7..94c6c048130f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -31,13 +31,14 @@ #include "btintel.h" #include "btbcm.h" +#include "btrtl.h" #define VERSION "0.8" static bool disable_scofix; static bool force_scofix; -static bool reset = 1; +static bool reset = true; static struct usb_driver btusb_driver; @@ -330,6 +331,7 @@ static const struct usb_device_id blacklist_table[] = { #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 +#define BTUSB_RESET_RESUME 10 struct btusb_data { struct hci_dev *hdev; @@ -1372,378 +1374,6 @@ static int btusb_setup_csr(struct hci_dev *hdev) return ret; } -#define RTL_FRAG_LEN 252 - -struct rtl_download_cmd { - __u8 index; - __u8 data[RTL_FRAG_LEN]; -} __packed; - -struct rtl_download_response { - __u8 status; - __u8 index; -} __packed; - -struct rtl_rom_version_evt { - __u8 status; - __u8 version; -} __packed; - -struct rtl_epatch_header { - __u8 signature[8]; - __le32 fw_version; - __le16 num_patches; -} __packed; - -#define RTL_EPATCH_SIGNATURE "Realtech" -#define RTL_ROM_LMP_3499 0x3499 -#define RTL_ROM_LMP_8723A 0x1200 -#define RTL_ROM_LMP_8723B 0x8723 -#define RTL_ROM_LMP_8821A 0x8821 -#define RTL_ROM_LMP_8761A 0x8761 - -static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) -{ - struct rtl_rom_version_evt *rom_version; - struct sk_buff *skb; - int ret; - - /* Read RTL ROM version command */ - skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - BT_ERR("%s: Read ROM version failed (%ld)", - hdev->name, PTR_ERR(skb)); - return PTR_ERR(skb); - } - - if (skb->len != sizeof(*rom_version)) { - BT_ERR("%s: RTL version event length mismatch", hdev->name); - kfree_skb(skb); - return -EIO; - } - - rom_version = (struct rtl_rom_version_evt *)skb->data; - BT_INFO("%s: rom_version status=%x version=%x", - hdev->name, rom_version->status, rom_version->version); - - ret = rom_version->status; - if (ret == 0) - *version = rom_version->version; - - kfree_skb(skb); - return ret; -} - -static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, - const struct firmware *fw, - unsigned char **_buf) -{ - const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; - struct rtl_epatch_header *epatch_info; - unsigned char *buf; - int i, ret, len; - size_t min_size; - u8 opcode, length, data, rom_version = 0; - int project_id = -1; - const unsigned char *fwptr, *chip_id_base; - const unsigned char *patch_length_base, *patch_offset_base; - u32 patch_offset = 0; - u16 patch_length, num_patches; - const u16 project_id_to_lmp_subver[] = { - RTL_ROM_LMP_8723A, - RTL_ROM_LMP_8723B, - RTL_ROM_LMP_8821A, - RTL_ROM_LMP_8761A - }; - - ret = rtl_read_rom_version(hdev, &rom_version); - if (ret) - return -bt_to_errno(ret); - - min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; - if (fw->size < min_size) - return -EINVAL; - - fwptr = fw->data + fw->size - sizeof(extension_sig); - if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { - BT_ERR("%s: extension section signature mismatch", hdev->name); - return -EINVAL; - } - - /* Loop from the end of the firmware parsing instructions, until - * we find an instruction that identifies the "project ID" for the - * hardware supported by this firwmare file. - * Once we have that, we double-check that that project_id is suitable - * for the hardware we are working with. - */ - while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { - opcode = *--fwptr; - length = *--fwptr; - data = *--fwptr; - - BT_DBG("check op=%x len=%x data=%x", opcode, length, data); - - if (opcode == 0xff) /* EOF */ - break; - - if (length == 0) { - BT_ERR("%s: found instruction with length 0", - hdev->name); - return -EINVAL; - } - - if (opcode == 0 && length == 1) { - project_id = data; - break; - } - - fwptr -= length; - } - - if (project_id < 0) { - BT_ERR("%s: failed to find version instruction", hdev->name); - return -EINVAL; - } - - if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) { - BT_ERR("%s: unknown project id %d", hdev->name, project_id); - return -EINVAL; - } - - if (lmp_subver != project_id_to_lmp_subver[project_id]) { - BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, - project_id_to_lmp_subver[project_id], lmp_subver); - return -EINVAL; - } - - epatch_info = (struct rtl_epatch_header *)fw->data; - if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { - BT_ERR("%s: bad EPATCH signature", hdev->name); - return -EINVAL; - } - - num_patches = le16_to_cpu(epatch_info->num_patches); - BT_DBG("fw_version=%x, num_patches=%d", - le32_to_cpu(epatch_info->fw_version), num_patches); - - /* After the rtl_epatch_header there is a funky patch metadata section. - * Assuming 2 patches, the layout is: - * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 - * - * Find the right patch for this chip. - */ - min_size += 8 * num_patches; - if (fw->size < min_size) - return -EINVAL; - - chip_id_base = fw->data + sizeof(struct rtl_epatch_header); - patch_length_base = chip_id_base + (sizeof(u16) * num_patches); - patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); - for (i = 0; i < num_patches; i++) { - u16 chip_id = get_unaligned_le16(chip_id_base + - (i * sizeof(u16))); - if (chip_id == rom_version + 1) { - patch_length = get_unaligned_le16(patch_length_base + - (i * sizeof(u16))); - patch_offset = get_unaligned_le32(patch_offset_base + - (i * sizeof(u32))); - break; - } - } - - if (!patch_offset) { - BT_ERR("%s: didn't find patch for chip id %d", - hdev->name, rom_version); - return -EINVAL; - } - - BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); - min_size = patch_offset + patch_length; - if (fw->size < min_size) - return -EINVAL; - - /* Copy the firmware into a new buffer and write the version at - * the end. - */ - len = patch_length; - buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); - - *_buf = buf; - return len; -} - -static int rtl_download_firmware(struct hci_dev *hdev, - const unsigned char *data, int fw_len) -{ - struct rtl_download_cmd *dl_cmd; - int frag_num = fw_len / RTL_FRAG_LEN + 1; - int frag_len = RTL_FRAG_LEN; - int ret = 0; - int i; - - dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); - if (!dl_cmd) - return -ENOMEM; - - for (i = 0; i < frag_num; i++) { - struct rtl_download_response *dl_resp; - struct sk_buff *skb; - - BT_DBG("download fw (%d/%d)", i, frag_num); - - dl_cmd->index = i; - if (i == (frag_num - 1)) { - dl_cmd->index |= 0x80; /* data end */ - frag_len = fw_len % RTL_FRAG_LEN; - } - memcpy(dl_cmd->data, data, frag_len); - - /* Send download command */ - skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, - HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - BT_ERR("%s: download fw command failed (%ld)", - hdev->name, PTR_ERR(skb)); - ret = -PTR_ERR(skb); - goto out; - } - - if (skb->len != sizeof(*dl_resp)) { - BT_ERR("%s: download fw event length mismatch", - hdev->name); - kfree_skb(skb); - ret = -EIO; - goto out; - } - - dl_resp = (struct rtl_download_response *)skb->data; - if (dl_resp->status != 0) { - kfree_skb(skb); - ret = bt_to_errno(dl_resp->status); - goto out; - } - - kfree_skb(skb); - data += RTL_FRAG_LEN; - } - -out: - kfree(dl_cmd); - return ret; -} - -static int btusb_setup_rtl8723a(struct hci_dev *hdev) -{ - struct btusb_data *data = dev_get_drvdata(&hdev->dev); - struct usb_device *udev = interface_to_usbdev(data->intf); - const struct firmware *fw; - int ret; - - BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name); - ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev); - if (ret < 0) { - BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name); - return ret; - } - - if (fw->size < 8) { - ret = -EINVAL; - goto out; - } - - /* Check that the firmware doesn't have the epatch signature - * (which is only for RTL8723B and newer). - */ - if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { - BT_ERR("%s: unexpected EPATCH signature!", hdev->name); - ret = -EINVAL; - goto out; - } - - ret = rtl_download_firmware(hdev, fw->data, fw->size); - -out: - release_firmware(fw); - return ret; -} - -static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, - const char *fw_name) -{ - struct btusb_data *data = dev_get_drvdata(&hdev->dev); - struct usb_device *udev = interface_to_usbdev(data->intf); - unsigned char *fw_data = NULL; - const struct firmware *fw; - int ret; - - BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); - ret = request_firmware(&fw, fw_name, &udev->dev); - if (ret < 0) { - BT_ERR("%s: Failed to load %s", hdev->name, fw_name); - return ret; - } - - ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); - if (ret < 0) - goto out; - - ret = rtl_download_firmware(hdev, fw_data, ret); - kfree(fw_data); - if (ret < 0) - goto out; - -out: - release_firmware(fw); - return ret; -} - -static int btusb_setup_realtek(struct hci_dev *hdev) -{ - struct sk_buff *skb; - struct hci_rp_read_local_version *resp; - u16 lmp_subver; - - skb = btusb_read_local_version(hdev); - if (IS_ERR(skb)) - return -PTR_ERR(skb); - - resp = (struct hci_rp_read_local_version *)skb->data; - BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " - "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, - resp->lmp_ver, resp->lmp_subver); - - lmp_subver = le16_to_cpu(resp->lmp_subver); - kfree_skb(skb); - - /* Match a set of subver values that correspond to stock firmware, - * which is not compatible with standard btusb. - * If matched, upload an alternative firmware that does conform to - * standard btusb. Once that firmware is uploaded, the subver changes - * to a different value. - */ - switch (lmp_subver) { - case RTL_ROM_LMP_8723A: - case RTL_ROM_LMP_3499: - return btusb_setup_rtl8723a(hdev); - case RTL_ROM_LMP_8723B: - return btusb_setup_rtl8723b(hdev, lmp_subver, - "rtl_bt/rtl8723b_fw.bin"); - case RTL_ROM_LMP_8821A: - return btusb_setup_rtl8723b(hdev, lmp_subver, - "rtl_bt/rtl8821a_fw.bin"); - case RTL_ROM_LMP_8761A: - return btusb_setup_rtl8723b(hdev, lmp_subver, - "rtl_bt/rtl8761a_fw.bin"); - default: - BT_INFO("rtl: assuming no firmware upload needed."); - return 0; - } -} - static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, struct intel_version *ver) { @@ -1951,12 +1581,6 @@ static int btusb_setup_intel(struct hci_dev *hdev) } ver = (struct intel_version *)skb->data; - if (ver->status) { - BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, - ver->status); - kfree_skb(skb); - return -bt_to_errno(ver->status); - } BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", hdev->name, ver->hw_platform, ver->hw_variant, @@ -2004,15 +1628,6 @@ static int btusb_setup_intel(struct hci_dev *hdev) return PTR_ERR(skb); } - if (skb->data[0]) { - u8 evt_status = skb->data[0]; - - BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", - hdev->name, evt_status); - kfree_skb(skb); - release_firmware(fw); - return -bt_to_errno(evt_status); - } kfree_skb(skb); disable_patch = 1; @@ -2358,13 +1973,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) } ver = (struct intel_version *)skb->data; - if (ver->status) { - BT_ERR("%s: Intel version command failure (%02x)", - hdev->name, ver->status); - err = -bt_to_errno(ver->status); - kfree_skb(skb); - return err; - } /* The hardware platform number has a fixed value of 0x37 and * for now only accept this single value. @@ -2439,13 +2047,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) } params = (struct intel_boot_params *)skb->data; - if (params->status) { - BT_ERR("%s: Intel boot parameters command failure (%02x)", - hdev->name, params->status); - err = -bt_to_errno(params->status); - kfree_skb(skb); - return err; - } BT_INFO("%s: Device revision is %u", hdev->name, le16_to_cpu(params->dev_revid)); @@ -2678,13 +2279,6 @@ static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code) return; } - if (skb->data[0] != 0x00) { - BT_ERR("%s: Exception info command failure (%02x)", - hdev->name, skb->data[0]); - kfree_skb(skb); - return; - } - BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1)); kfree_skb(skb); @@ -2792,6 +2386,7 @@ struct qca_device_info { static const struct qca_device_info qca_devices_table[] = { { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */ { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */ + { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */ { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */ { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */ { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ @@ -3175,8 +2770,17 @@ static int btusb_probe(struct usb_interface *intf, hdev->set_bdaddr = btusb_set_bdaddr_ath3012; } - if (id->driver_info & BTUSB_REALTEK) - hdev->setup = btusb_setup_realtek; +#ifdef CONFIG_BT_HCIBTUSB_RTL + if (id->driver_info & BTUSB_REALTEK) { + hdev->setup = btrtl_setup_realtek; + + /* Realtek devices lose their updated firmware over suspend, + * but the USB hub doesn't notice any status change. + * Explicitly request a device reset on resume. + */ + set_bit(BTUSB_RESET_RESUME, &data->flags); + } +#endif if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ @@ -3308,6 +2912,14 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message) btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor); + /* Optionally request a device reset on resume, but only when + * wakeups are disabled. If wakeups are enabled we assume the + * device will stay powered up throughout suspend. + */ + if (test_bit(BTUSB_RESET_RESUME, &data->flags) && + !device_may_wakeup(&data->udev->dev)) + data->udev->reset_resume = 1; + return 0; } diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c index 55c135b7757a..7a722df97343 100644 --- a/drivers/bluetooth/btwilink.c +++ b/drivers/bluetooth/btwilink.c @@ -22,7 +22,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#define DEBUG + #include <linux/platform_device.h> #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index dc8e3d4356a0..fc0056a28b81 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -47,8 +47,8 @@ #include "hci_uart.h" -static bool txcrc = 1; -static bool hciextn = 1; +static bool txcrc = true; +static bool hciextn = true; #define BCSP_TXWINSIZE 4 |
