summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci_xgene.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci_xgene.c')
-rw-r--r--drivers/ata/ahci_xgene.c60
1 files changed, 47 insertions, 13 deletions
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 042a9bb45c86..ee3a3659bd9e 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -78,6 +78,7 @@
struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
+ u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/
void __iomem *csr_core; /* Core CSR address of IP */
void __iomem *csr_diag; /* Diag CSR address of IP */
void __iomem *csr_axi; /* AXI CSR address of IP */
@@ -98,20 +99,62 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx)
}
/**
+ * xgene_ahci_restart_engine - Restart the dma engine.
+ * @ap : ATA port of interest
+ *
+ * Restarts the dma engine inside the controller.
+ */
+static int xgene_ahci_restart_engine(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ ahci_stop_engine(ap);
+ ahci_start_fis_rx(ap);
+ hpriv->start_engine(ap);
+
+ return 0;
+}
+
+/**
+ * xgene_ahci_qc_issue - Issue commands to the device
+ * @qc: Command to issue
+ *
+ * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
+ * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
+ * state machine goes into the CMFatalErrorUpdate state and locks up. By
+ * restarting the dma engine, it removes the controller out of lock up state.
+ */
+static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct xgene_ahci_context *ctx = hpriv->plat_data;
+ int rc = 0;
+
+ if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
+ xgene_ahci_restart_engine(ap);
+
+ rc = ahci_qc_issue(qc);
+
+ /* Save the last command issued */
+ ctx->last_cmd[ap->port_no] = qc->tf.command;
+
+ return rc;
+}
+
+/**
* xgene_ahci_read_id - Read ID data from the specified device
* @dev: device
* @tf: proposed taskfile
* @id: data buffer
*
* This custom read ID function is required due to the fact that the HW
- * does not support DEVSLP and the controller state machine may get stuck
- * after processing the ID query command.
+ * does not support DEVSLP.
*/
static unsigned int xgene_ahci_read_id(struct ata_device *dev,
struct ata_taskfile *tf, u16 *id)
{
u32 err_mask;
- void __iomem *port_mmio = ahci_port_base(dev->link->ap);
err_mask = ata_do_dev_read_id(dev, tf, id);
if (err_mask)
@@ -133,16 +176,6 @@ static unsigned int xgene_ahci_read_id(struct ata_device *dev,
*/
id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
- /*
- * Due to HW errata, restart the port if no other command active.
- * Otherwise the controller may get stuck.
- */
- if (!readl(port_mmio + PORT_CMD_ISSUE)) {
- writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* Force a barrier */
- writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* Force a barrier */
- }
return 0;
}
@@ -300,6 +333,7 @@ static struct ata_port_operations xgene_ahci_ops = {
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
.read_id = xgene_ahci_read_id,
+ .qc_issue = xgene_ahci_qc_issue,
};
static const struct ata_port_info xgene_ahci_port_info = {
OpenPOWER on IntegriCloud