diff options
Diffstat (limited to 'arch')
217 files changed, 14304 insertions, 2403 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 19cb6fcecf89..a1c776b8dcec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,83 +1,91 @@ ifeq ($(CONFIG_OF),y) +dtb-$(CONFIG_MACH_ASM9260) += \ + alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC -# rm9200 -dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb -dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb -# sam9260 -dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb -dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb -dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb -dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb -dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb -# sam9261 -dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb -# sam9263 -dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb -dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb -# sam9g20 -dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb -dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb -dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb -# sam9g45 -dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb -dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb -# sam9n12 -dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb -# sam9rl -dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb -# sam9x5 -dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb -dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb -# sama5d3 -dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb -# sama5d4 -dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb - -dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb -dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb +dtb-$(CONFIG_SOC_SAM_V4_V5) += \ + at91rm9200ek.dtb \ + mpa1600.dtb \ + animeo_ip.dtb \ + at91-qil_a9260.dtb \ + aks-cdu.dtb \ + ethernut5.dtb \ + evk-pro3.dtb \ + tny_a9260.dtb \ + usb_a9260.dtb \ + at91sam9261ek.dtb \ + at91sam9263ek.dtb \ + tny_a9263.dtb \ + usb_a9263.dtb \ + at91-foxg20.dtb \ + at91sam9g20ek.dtb \ + at91sam9g20ek_2mmc.dtb \ + kizbox.dtb \ + tny_a9g20.dtb \ + usb_a9g20.dtb \ + usb_a9g20_lpw.dtb \ + at91sam9m10g45ek.dtb \ + pm9g45.dtb \ + at91sam9n12ek.dtb \ + at91sam9rlek.dtb \ + at91-ariag25.dtb \ + at91-cosino_mega2560.dtb \ + at91sam9g15ek.dtb \ + at91sam9g25ek.dtb \ + at91sam9g35ek.dtb \ + at91sam9x25ek.dtb \ + at91sam9x35ek.dtb +dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-sama5d3_xplained.dtb \ + sama5d31ek.dtb \ + sama5d33ek.dtb \ + sama5d34ek.dtb \ + sama5d35ek.dtb \ + sama5d36ek.dtb \ + at91-sama5d4ek.dtb +dtb-$(CONFIG_ARCH_ATLAS6) += \ + atlas6-evb.dtb +dtb-$(CONFIG_ARCH_ATLAS7) += \ + atlas7-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += \ + axm5516-amarillo.dtb +dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2835-rpi-b.dtb \ + bcm2835-rpi-b-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ bcm47081-asus-rt-n18u.dtb \ - bcm47081-buffalo-wzr-600dhp2.dtb -dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb -dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \ + bcm47081-buffalo-wzr-600dhp2.dtb \ + bcm47081-buffalo-wzr-900dhp.dtb +dtb-$(CONFIG_ARCH_BCM_63XX) += \ + bcm963138dvt.dtb +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ + bcm911360_entphn.dtb \ bcm911360k.dtb \ bcm958300k.dtb -dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ +dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ + bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ - berlin2-sony-nsz-gs7.dtb \ - berlin2cd-google-chromecast.dtb \ + berlin2-sony-nsz-gs7.dtb \ + berlin2cd-google-chromecast.dtb \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb -dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ +dtb-$(CONFIG_ARCH_DAVINCI) += \ + da850-enbw-cmc.dtb \ da850-evm.dtb -dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ - exynos3250-rinato.dtb \ +dtb-$(CONFIG_ARCH_DIGICOLOR) += \ + cx92755_equinox.dtb +dtb-$(CONFIG_ARCH_EFM32) += \ + efm32gg-dk3750.dtb +dtb-$(CONFIG_ARCH_EXYNOS3) += \ + exynos3250-monk.dtb \ + exynos3250-rinato.dtb +dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ @@ -88,7 +96,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ - exynos4412-trats2.dtb \ + exynos4412-trats2.dtb +dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ @@ -98,20 +107,31 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-odroidxu3.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb -dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb -dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb -dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ +dtb-$(CONFIG_ARCH_HI3xxx) += \ + hi3620-hi4511.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += \ + hisi-x5hd2-dkb.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += \ + highbank.dtb \ ecx-2000.dtb -dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb -dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ +dtb-$(CONFIG_ARCH_HIP01) += \ + hip01-ca9x2.dtb +dtb-$(CONFIG_ARCH_HIP04) += \ + hip04-d01.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += \ + integratorap.dtb \ integratorcp.dtb -dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ +dtb-$(CONFIG_ARCH_KEYSTONE) += \ + k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb -dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ +dtb-$(CONFIG_MACH_KIRKWOOD) += \ + kirkwood-b3.dtb \ + kirkwood-blackarmor-nas220.dtb \ kirkwood-cloudbox.dtb \ kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ @@ -160,6 +180,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-openrd-base.dtb \ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ + kirkwood-pogo_e02.dtb \ kirkwood-rd88f6192.dtb \ kirkwood-rd88f6281-z0.dtb \ kirkwood-rd88f6281-a.dtb \ @@ -174,37 +195,47 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb -dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb -dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb -dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \ +dtb-$(CONFIG_ARCH_LPC32XX) += \ + ea3250.dtb phy3250.dtb +dtb-$(CONFIG_MACH_MESON6) += \ + meson6-atv1200.dtb +dtb-$(CONFIG_ARCH_MMP) += \ + pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb -dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb -dtb-$(CONFIG_ARCH_MXC) += \ +dtb-$(CONFIG_ARCH_MOXART) += \ + moxart-uc7112lx.dtb +dtb-$(CONFIG_SOC_IMX1) += \ imx1-ads.dtb \ - imx1-apf9328.dtb \ + imx1-apf9328.dtb +dtb-$(CONFIG_SOC_IMX25) += \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \ imx25-karo-tx25.dtb \ - imx25-pdk.dtb \ + imx25-pdk.dtb +dtb-$(CONFIG_SOC_IMX31) += \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ imx27-eukrea-mbimxsd27-baseboard.dtb \ imx27-pdk.dtb \ imx27-phytec-phycore-rdk.dtb \ - imx27-phytec-phycard-s-rdk.dtb \ - imx31-bug.dtb \ + imx27-phytec-phycard-s-rdk.dtb +dtb-$(CONFIG_SOC_IMX31) += \ + imx31-bug.dtb +dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ - imx35-pdk.dtb \ - imx50-evk.dtb \ + imx35-pdk.dtb +dtb-$(CONFIG_SOC_IMX50) += \ + imx50-evk.dtb +dtb-$(CONFIG_SOC_IMX51) += \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx51-digi-connectcore-jsk.dtb \ - imx51-eukrea-mbimxsd51-baseboard.dtb \ + imx51-eukrea-mbimxsd51-baseboard.dtb +dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ @@ -213,7 +244,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-smd.dtb \ imx53-tx53-x03x.dtb \ imx53-tx53-x13x.dtb \ - imx53-voipac-bsb.dtb \ + imx53-voipac-bsb.dtb +dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_7.dtb \ imx6dl-cubox-i.dtb \ @@ -234,6 +266,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6u-801x.dtb \ imx6dl-tx6u-811x.dtb \ + imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ imx6q-arm2.dtb \ @@ -257,23 +290,29 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ - imx6q-udoo.dtb \ - imx6q-wandboard.dtb \ - imx6q-wandboard-revb1.dtb \ imx6q-tx6q-1010.dtb \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1110.dtb \ - imx6sl-evk.dtb \ - imx6sx-sdb.dtb \ + imx6q-udoo.dtb \ + imx6q-wandboard.dtb \ + imx6q-wandboard-revb1.dtb +dtb-$(CONFIG_SOC_IMX6SL) += \ + imx6sl-evk.dtb +dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-sabreauto.dtb \ + imx6sx-sdb.dtb +dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ - ls1021a-twr.dtb \ + ls1021a-twr.dtb +dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb -dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ +dtb-$(CONFIG_ARCH_MXS) += \ + imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ imx28-apf28.dtb \ @@ -294,17 +333,21 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb -dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \ +dtb-$(CONFIG_ARCH_NOMADIK) += \ + ste-nomadik-s8815.dtb \ ste-nomadik-nhk15.dtb -dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ +dtb-$(CONFIG_ARCH_NSPIRE) += \ + nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb -dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \ +dtb-$(CONFIG_ARCH_OMAP2) += \ + omap2420-h4.dtb \ omap2420-n800.dtb \ omap2420-n810.dtb \ omap2420-n810-wimax.dtb \ omap2430-sdp.dtb -dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ +dtb-$(CONFIG_ARCH_OMAP3) += \ + am3517-craneboard.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ omap3430-sdp.dtb \ @@ -348,7 +391,10 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-sbc-t3730.dtb \ omap3-thunder.dtb \ omap3-zoom3.dtb -dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ +dtb-$(CONFIG_SOC_TI81XX) += \ + dm8168-evm.dtb +dtb-$(CONFIG_SOC_AM33XX) += \ + am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ am335x-evm.dtb \ @@ -356,7 +402,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ am335x-lxm.dtb -dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ +dtb-$(CONFIG_ARCH_OMAP4) += \ + omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ @@ -364,20 +411,26 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb -dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ +dtb-$(CONFIG_SOC_AM43XX) += \ + am43x-epos-evm.dtb \ am437x-sk-evm.dtb \ + am437x-idk-evm.dtb \ am437x-gp-evm.dtb -dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ +dtb-$(CONFIG_SOC_OMAP5) += \ + omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb -dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ +dtb-$(CONFIG_SOC_DRA7XX) += \ + dra7-evm.dtb \ am57xx-beagle-x15.dtb \ dra72-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ +dtb-$(CONFIG_ARCH_ORION5X) += \ + orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb -dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_PRIMA2) += \ + prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -388,17 +441,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb -dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb +dtb-$(CONFIG_ARCH_REALVIEW) += \ + arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3066a-marsboard.dtb \ + rk3066a-rayeager.dtb \ rk3188-radxarock.dtb \ rk3288-evb-act8846.dtb \ - rk3288-evb-rk808.dtb -dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb -dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ + rk3288-evb-rk808.dtb \ + rk3288-firefly-beta.dtb \ + rk3288-firefly.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += \ + s3c2416-smdk2416.dtb +dtb-$(CONFIG_ARCH_S3C64XX) += \ + s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ +dtb-$(CONFIG_ARCH_S5PV210) += \ + s5pv210-aquila.dtb \ s5pv210-goni.dtb \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ @@ -413,44 +473,58 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ sh7372-mackerel.dtb \ sh73a0-kzm9g.dtb \ sh73a0-kzm9g-reference.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ + emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7794-alt.dtb -dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ +dtb-$(CONFIG_ARCH_SOCFPGA) += \ + socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_vt.dtb -dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ +dtb-$(CONFIG_ARCH_SPEAR13XX) += \ + spear1310-evb.dtb \ spear1340-evb.dtb -dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ +dtb-$(CONFIG_ARCH_SPEAR3XX) += \ + spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb -dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ +dtb-$(CONFIG_ARCH_SPEAR6XX) += \ + spear600-evb.dtb +dtb-$(CONFIG_ARCH_STI) += \ + stih407-b2120.dtb \ stih410-b2120.dtb \ stih415-b2000.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ stih416-b2020.dtb \ - stih416-b2020e.dtb + stih416-b2020e.dtb \ + stih418-b2199.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ + sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ + sun4i-a10-mk802.dtb \ + sun4i-a10-mk802ii.dtb \ sun4i-a10-hackberry.dtb \ + sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-hsg-h702.dtb \ @@ -460,9 +534,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ sun6i-a31-hummingbird.dtb \ - sun6i-a31-m9.dtb + sun6i-a31-m9.dtb \ + sun6i-a31s-cs908.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ @@ -473,10 +549,12 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a23-ippo-q8h-v5.dtb + sun8i-a23-ippo-q8h-v5.dtb \ + sun8i-a23-ippo-q8h-v1.2.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb -dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ + tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -485,34 +563,43 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-tec.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ - tegra20-whistler.dtb \ + tegra20-whistler.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra30-colibri-eval-v3.dtb \ + tegra30-colibri-eval-v3.dtb +dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ - tegra114-tn7.dtb \ + tegra114-tn7.dtb +dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ tegra124-venice2.dtb -dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb -dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ +dtb-$(CONFIG_ARCH_U300) += \ + ste-u300.dtb +dtb-$(CONFIG_ARCH_U8500) += \ + ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ ste-hrefv60plus-stuib.dtb \ ste-hrefv60plus-tvk.dtb \ ste-ccu8540.dtb \ ste-ccu9540.dtb -dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ +dtb-$(CONFIG_ARCH_VERSATILE) += \ + versatile-ab.dtb \ versatile-pb.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ +dtb-$(CONFIG_ARCH_VEXPRESS) += \ + vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ vexpress-v2p-ca15_a7.dtb -dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb -dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ +dtb-$(CONFIG_ARCH_VIRT) += \ + xenvm-4.2.dtb +dtb-$(CONFIG_ARCH_VT8500) += \ + vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ wm8750-apc8750.dtb \ @@ -533,8 +620,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb \ - armada-385-rd.dtb + armada-385-db-ap.dtb \ + armada-388-db.dtb \ + armada-388-gp.dtb \ + armada-388-rd.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ @@ -544,17 +633,18 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-netgear-rn2120.dtb \ armada-xp-openblocks-ax3-4.dtb \ armada-xp-synology-ds414.dtb -dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ +dtb-$(CONFIG_MACH_DOVE) += \ + dove-cm-a510.dtb \ dove-cubox.dtb \ dove-cubox-es.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \ +dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt6589-aquaris5.dtb \ mt6592-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb - endif always := $(dtb-y) diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts new file mode 100644 index 000000000000..c77e2c902fb6 --- /dev/null +++ b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts @@ -0,0 +1,13 @@ +/* + * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de> + * + * Licensed under the X11 license or the GPL v2 (or later) + */ + +/dts-v1/; +#include "alphascale-asm9260.dtsi" + +/ { + model = "Alphascale asm9260 Development Kit"; + compatible = "alphascale,asm9260devkit", "alphascale,asm9260"; +}; diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi new file mode 100644 index 000000000000..907fc7bfc418 --- /dev/null +++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi @@ -0,0 +1,63 @@ +/* + * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de> + * + * Licensed under the X11 license or the GPL v2 (or later) + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/alphascale,asm9260.h> + +/ { + interrupt-parent = <&icoll>; + + memory { + device_type = "memory"; + reg = <0x20000000 0x2000000>; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + clocks = <&acc CLKID_SYS_CPU>; + }; + }; + + osc24m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-accuracy = <30000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + acc: clock-controller@80040000 { + compatible = "alphascale,asm9260-clock-controller"; + #clock-cells = <1>; + clocks = <&osc24m>; + reg = <0x80040000 0x204>; + }; + + icoll: interrupt-controller@80054000 { + compatible = "alphascale,asm9260-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80054000 0x200>; + }; + + timer0: timer@80088000 { + compatible = "alphascale,asm9260-timer"; + reg = <0x80088000 0x4000>; + clocks = <&acc CLKID_AHB_TIMER0>; + interrupts = <29>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index b62a1cd776cd..1943fc333e7c 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -948,6 +948,22 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + vpfe0: vpfe@48326000 { + compatible = "ti,am437x-vpfe"; + reg = <0x48326000 0x2000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "vpfe0"; + status = "disabled"; + }; + + vpfe1: vpfe@48328000 { + compatible = "ti,am437x-vpfe"; + reg = <0x48328000 0x2000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "vpfe1"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 7eaae4cf9f89..f84d9715a4a9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -268,6 +268,78 @@ 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ >; }; + + vpfe0_pins_default: vpfe0_pins_default { + pinctrl-single,pins = < + 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + >; + }; + + vpfe0_pins_sleep: vpfe0_pins_sleep { + pinctrl-single,pins = < + 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ + 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ + 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ + 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ + 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ + 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ + 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ + 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ + 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ + 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ + 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ + 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ + 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ + >; + }; + + vpfe1_pins_default: vpfe1_pins_default { + pinctrl-single,pins = < + 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ + 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ + 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ + 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ + 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ + 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ + 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ + 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ + 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ + 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ + 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ + 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ + 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ + >; + }; + + vpfe1_pins_sleep: vpfe1_pins_sleep { + pinctrl-single,pins = < + 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ + 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ + 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ + 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ + 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ + 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ + 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ + 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ + 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ + 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ + 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ + 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ + 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ + >; + }; }; &i2c0 { @@ -545,3 +617,37 @@ pinctrl-0 = <&dcan1_default>; status = "okay"; }; + +&vpfe0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe0_pins_default>; + pinctrl-1 = <&vpfe0_pins_sleep>; + + port { + vpfe0_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; + +&vpfe1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe1_pins_default>; + pinctrl-1 = <&vpfe1_pins_sleep>; + + port { + vpfe1_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts new file mode 100644 index 000000000000..f9a17e2ca8cb --- /dev/null +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -0,0 +1,405 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am4372.dtsi" +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TI AM437x Industrial Development Kit"; + compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43"; + + v24_0d: fixed-regulator-v24_0d { + compatible = "regulator-fixed"; + regulator-name = "V24_0D"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + regulator-boot-on; + }; + + v3_3d: fixed-regulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "V3_3D"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + vdd_corereg: fixed-regulator-vdd_corereg { + compatible = "regulator-fixed"; + regulator-name = "VDD_COREREG"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + vdd_core: fixed-regulator-vdd_core { + compatible = "regulator-fixed"; + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_corereg>; + }; + + v1_8dreg: fixed-regulator-v1_8dreg{ + compatible = "regulator-fixed"; + regulator-name = "V1_8DREG"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + v1_8d: fixed-regulator-v1_8d{ + compatible = "regulator-fixed"; + regulator-name = "V1_8D"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v1_8dreg>; + }; + + v1_5dreg: fixed-regulator-v1_5dreg{ + compatible = "regulator-fixed"; + regulator-name = "V1_5DREG"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + v1_5d: fixed-regulator-v1_5d{ + compatible = "regulator-fixed"; + regulator-name = "V1_5D"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v1_5dreg>; + }; + + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + label = "power-button"; + linux,code = <KEY_POWER>; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&am43xx_pinmux { + gpio_keys_pins_default: gpio_keys_pins_default { + pinctrl-single,pins = < + 0x1b8 (PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */ + >; + }; + + i2c0_pins_default: i2c0_pins_default { + pinctrl-single,pins = < + 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c0_pins_sleep: i2c0_pins_sleep { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins_default: i2c1_pins_default { + pinctrl-single,pins = < + 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + >; + }; + + i2c1_pins_sleep: i2c1_pins_sleep { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins_default { + pinctrl-single,pins = < + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + ecap0_pins_default: backlight_pins_default { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + qspi_pins_default: qspi_pins_default { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + qspi_pins_sleep: qspi_pins_sleep{ + pinctrl-single,pins = < + 0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_default>; + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_default>; + pinctrl-1 = <&i2c1_pins_default>; + clock-frequency = <400000>; + + tps: tps62362@60 { + compatible = "ti,tps62362"; + regulator-name = "VDD_MPU"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1330000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + vin-supply = <&v3_3d>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins_default>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + vmmc-supply = <&v3_3d>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_pins_default>; + pinctrl-1 = <&qspi_pins_sleep>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * MTD partition table. The ROM checks the first 512KiB for a + * valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&cpu { + cpu0-supply = <&tps>; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 53bbfc90b26a..832d24318f62 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -153,20 +153,26 @@ i2c0_pins: i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: i2c1_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < + 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; @@ -184,35 +190,75 @@ >; }; + vpfe0_pins_default: vpfe0_pins_default { + pinctrl-single,pins = < + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/ + 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/ + 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + >; + }; + + vpfe0_pins_sleep: vpfe0_pins_sleep { + pinctrl-single,pins = < + 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ /* Slave 2 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ >; }; @@ -251,8 +297,8 @@ davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; @@ -266,46 +312,46 @@ dss_pins: dss_pins { pinctrl-single,pins = < - 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ - 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ - 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ - 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ - 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ - 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ - 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ - 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT | MUX_MODE1) + 0x028 (PIN_OUTPUT | MUX_MODE1) + 0x02c (PIN_OUTPUT | MUX_MODE1) + 0x030 (PIN_OUTPUT | MUX_MODE1) + 0x034 (PIN_OUTPUT | MUX_MODE1) + 0x038 (PIN_OUTPUT | MUX_MODE1) + 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT | MUX_MODE0) + 0x0a8 (PIN_OUTPUT | MUX_MODE0) + 0x0ac (PIN_OUTPUT | MUX_MODE0) + 0x0b0 (PIN_OUTPUT | MUX_MODE0) + 0x0b4 (PIN_OUTPUT | MUX_MODE0) + 0x0b8 (PIN_OUTPUT | MUX_MODE0) + 0x0bc (PIN_OUTPUT | MUX_MODE0) + 0x0c0 (PIN_OUTPUT | MUX_MODE0) + 0x0c4 (PIN_OUTPUT | MUX_MODE0) + 0x0c8 (PIN_OUTPUT | MUX_MODE0) + 0x0cc (PIN_OUTPUT | MUX_MODE0) + 0x0d0 (PIN_OUTPUT | MUX_MODE0) + 0x0d4 (PIN_OUTPUT | MUX_MODE0) + 0x0d8 (PIN_OUTPUT | MUX_MODE0) + 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */ >; }; qspi_pins: qspi_pins { pinctrl-single,pins = < - 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ - 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ - 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ - 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ - 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ - 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ >; }; @@ -323,6 +369,18 @@ 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; + + usb1_pins: usb1_pins { + pinctrl-single,pins = < + 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ + >; + }; + + usb2_pins: usb2_pins { + pinctrl-single,pins = < + 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ + >; + }; }; &i2c0 { @@ -386,6 +444,11 @@ regulator-always-on; }; + power-button { + compatible = "ti,tps65218-pwrbutton"; + status = "okay"; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; }; at24@50 { @@ -479,6 +542,8 @@ &usb1 { dr_mode = "peripheral"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; }; &usb2_phy2 { @@ -488,6 +553,8 @@ &usb2 { dr_mode = "host"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; }; &qspi { @@ -610,3 +677,25 @@ &wdt { status = "okay"; }; + +&cpu { + cpu0-supply = <&dcdc2>; +}; + +&vpfe0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe0_pins_default>; + pinctrl-1 = <&vpfe0_pins_sleep>; + + /* Camera port */ + port { + vpfe0_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 662261d6b2ca..257c099c347e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -243,6 +243,42 @@ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + vpfe1_pins_default: vpfe1_pins_default { + pinctrl-single,pins = < + 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ + 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ + 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */ + 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */ + 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */ + 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */ + 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */ + 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */ + 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */ + 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */ + 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */ + 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */ + 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */ + >; + }; + + vpfe1_pins_sleep: vpfe1_pins_sleep { + pinctrl-single,pins = < + 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -634,3 +670,20 @@ }; }; }; + +&vpfe1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe1_pins_default>; + pinctrl-1 = <&vpfe1_pins_sleep>; + + port { + vpfe1_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 49edbda68cd5..03750af3b49a 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -80,6 +80,28 @@ default-state = "off"; }; }; + + gpio_fan: gpio_fan { + /* Based on 5v 500mA AFB02505HHB */ + compatible = "gpio-fan"; + gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, + <13000 1>; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&extcon_usb1_pins>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&extcon_usb2_pins>; + }; }; &dra7_pmx_core { @@ -140,6 +162,86 @@ >; }; + cpsw_pins_default: cpsw_pins_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ + 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ + 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ + 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ + 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ + 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ + 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ + 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ + 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ + 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ + 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ + 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ + + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ + >; + + }; + + cpsw_pins_sleep: cpsw_pins_sleep { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (PIN_INPUT | MUX_MODE15) + 0x254 (PIN_INPUT | MUX_MODE15) + 0x258 (PIN_INPUT | MUX_MODE15) + 0x25c (PIN_INPUT | MUX_MODE15) + 0x260 (PIN_INPUT | MUX_MODE15) + 0x264 (PIN_INPUT | MUX_MODE15) + 0x268 (PIN_INPUT | MUX_MODE15) + 0x26c (PIN_INPUT | MUX_MODE15) + 0x270 (PIN_INPUT | MUX_MODE15) + 0x274 (PIN_INPUT | MUX_MODE15) + 0x278 (PIN_INPUT | MUX_MODE15) + 0x27c (PIN_INPUT | MUX_MODE15) + + /* Slave 2 */ + 0x198 (PIN_INPUT | MUX_MODE15) + 0x19c (PIN_INPUT | MUX_MODE15) + 0x1a0 (PIN_INPUT | MUX_MODE15) + 0x1a4 (PIN_INPUT | MUX_MODE15) + 0x1a8 (PIN_INPUT | MUX_MODE15) + 0x1ac (PIN_INPUT | MUX_MODE15) + 0x1b0 (PIN_INPUT | MUX_MODE15) + 0x1b4 (PIN_INPUT | MUX_MODE15) + 0x1b8 (PIN_INPUT | MUX_MODE15) + 0x1bc (PIN_INPUT | MUX_MODE15) + 0x1c0 (PIN_INPUT | MUX_MODE15) + 0x1c4 (PIN_INPUT | MUX_MODE15) + >; + }; + + davinci_mdio_pins_default: davinci_mdio_pins_default { + pinctrl-single,pins = < + /* MDIO */ + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ + >; + }; + + davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { + pinctrl-single,pins = < + 0x23c (PIN_INPUT | MUX_MODE15) + 0x240 (PIN_INPUT | MUX_MODE15) + >; + }; + tps659038_pins_default: tps659038_pins_default { pinctrl-single,pins = < 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ @@ -164,6 +266,17 @@ >; }; + extcon_usb1_pins: extcon_usb1_pins { + pinctrl-single,pins = < + 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ + >; + }; + + extcon_usb2_pins: extcon_usb2_pins { + pinctrl-single,pins = < + 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ + >; + }; }; &i2c1 { @@ -314,6 +427,12 @@ wakeup-source; ti,palmas-long-press-seconds = <12>; }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; }; tmp102: tmp102@48 { @@ -365,6 +484,32 @@ pinctrl-0 = <&uart3_pins_default>; }; +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_pins_default>; + pinctrl-1 = <&cpsw_pins_sleep>; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_pins_default>; + pinctrl-1 = <&davinci_mdio_pins_sleep>; +}; + &mmc1 { status = "okay"; @@ -403,3 +548,15 @@ pinctrl-names = "default"; pinctrl-0 = <&usb1_pins>; }; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&usb2 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 70b1943a86b1..e993c46bd472 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -8,9 +8,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index e1b0eb6b091f..b10ceb488efe 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -3,9 +3,43 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 1c83b7ce0982..3f8cc3845a5e 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 5fbfe02964dc..99eb8a014ac6 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 394308951ed9..6ae36a38beb2 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -6,9 +6,43 @@ * * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 70fecde76ccb..59f74e66963f 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 1af428602748..8a322ad57e5f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -8,9 +8,43 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Ben Dooks <ben.dooks@codethink.co.uk> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * This file contains the definitions that are common to the Armada * 370 and Armada XP SoC. diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index fdb3c12a6139..27397f151def 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada 370 SoC that are not * common to all Armada SoCs. diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 929ae00b4063..0440891425c0 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 50096d3427eb..ba3c57e0af72 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -6,9 +6,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -63,7 +97,7 @@ }; soc { - compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus"; + compatible = "marvell,armada375-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; controller = <&mbusc>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 4173a8ab34e7..5102d19cc8f4 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -32,9 +66,8 @@ soc { internal-regs { - pinctrl { + pinctrl@18000 { compatible = "marvell,mv88f6810-pinctrl"; - reg = <0x18000 0x20>; }; }; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts new file mode 100644 index 000000000000..57b9119fb3e0 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -0,0 +1,178 @@ +/* + * Device Tree file for Marvell Armada 385 Access Point Development board + * (DB-88F6820-AP) + * + * Copyright (C) 2014 Marvell + * + * Nadav Haklai <nadavh@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 Access Point Development Board"; + compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi1: spi@10680 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <54000000>; + }; + }; + + i2c0: i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + /* + * This bus is wired to two EEPROM + * sockets, one of which holding the + * board ID used by the bootloader. + * Erasing this EEPROM's content will + * brick the board. + * Use this bus with caution. + */ + }; + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@4 { + reg = <4>; + }; + + phy2: ethernet-phy@6 { + reg = <6>; + }; + }; + + /* UART0 is exposed through the JP8 connector */ + uart0: serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + /* + * UART1 is exposed through a FTDI chip + * wired to the mini-USB connector + */ + uart1: serial@12100 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + }; + + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + + ethernet@34000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + + ethernet@70000 { + pinctrl-names = "default"; + + /* + * The Reference Clock 0 is used to + * provide a clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The three PCIe units are accessible through + * standard mini-PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts deleted file mode 100644 index aaca2861dc87..000000000000 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Device Tree file for Marvell Armada 385 Reference Design board - * (RD-88F6820-AP) - * - * Copyright (C) 2014 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; -#include "armada-385.dtsi" - -/ { - model = "Marvell Armada 385 Reference Design"; - compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; - - internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - }; - - serial@12000 { - status = "okay"; - }; - - ethernet@30000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - usb3@f0000 { - status = "okay"; - }; - }; - - pcie-controller { - status = "okay"; - /* - * One PCIe units is accessible through - * standard PCIe slot on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 6283d7912f71..8e67d2c083dd 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -37,9 +71,8 @@ soc { internal-regs { - pinctrl { + pinctrl@18000 { compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; }; }; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2aaa9d2ac284..16512efcd32c 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -1,22 +1,57 @@ /* - * Device Tree file for Marvell Armada 385 evaluation board + * Device Tree file for Marvell Armada 388 evaluation board * (DB-88F6820) * * Copyright (C) 2014 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "armada-385.dtsi" +#include "armada-388.dtsi" / { model = "Marvell Armada 385 Development Board"; - compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; + compatible = "marvell,a385-db", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; @@ -74,7 +109,7 @@ phy-mode = "rgmii-id"; }; - mdio { + mdio@72004 { phy0: ethernet-phy@0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts new file mode 100644 index 000000000000..590b383db323 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -0,0 +1,414 @@ +/* + * Device Tree file for Marvell Armada 385 development board + * (RD-88F6820-GP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 GP"; + compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi@10600 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + /* + * The EEPROM located at adresse 54 is needed + * for the boot - DO NOT ERASE IT - + */ + + expander0: pca9555@20 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; + + expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x21>; + }; + + }; + + serial@12000 { + /* + * Exported on the micro USB connector CON16 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + /* GE1 CON15 */ + ethernet@30000 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* CON4 */ + usb@50000 { + vcc-supply = <®_usb2_0_vbus>; + status = "okay"; + }; + + /* GE0 CON1 */ + ethernet@70000 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>, <&sata1_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + + sata1: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata1>; + }; + }; + + sata@e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata2_pins>, <&sata3_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata2>; + }; + + sata3: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata3>; + }; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; + no-1-8-v; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + /* CON5 */ + usb3@f0000 { + vcc-supply = <®_usb2_1_vbus>; + status = "okay"; + }; + + /* CON7 */ + usb3@f8000 { + vcc-supply = <®_usb3_vbus>; + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * The two other PCIe units are accessible + * through mini PCIe slot on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 3000 1>; + }; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_0_vbus: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 14 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + enable-active-high; + regulator-always-on; + + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata0>; + }; + + reg_sata1: pwr-sata1 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata1>; + }; + + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata1>; + }; + + reg_sata2: pwr-sata2 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata2"; + enable-active-high; + regulator-always-on; + gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata2: v5-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata2>; + }; + + reg_12v_sata2: v12-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata2>; + }; + + reg_sata3: pwr-sata3 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata3"; + enable-active-high; + regulator-always-on; + gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata3: v5-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata3>; + }; + + reg_12v_sata3: v12-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata3"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata3>; + }; +}; + +&pinctrl { + pca0_pins: pca0_pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts new file mode 100644 index 000000000000..d99baac72081 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -0,0 +1,132 @@ +/* + * Device Tree file for Marvell Armada 388 Reference Design board + * (RD-88F6820-AP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388.dtsi" + +/ { + model = "Marvell Armada 385 Reference Design"; + compatible = "marvell,a385-rd", "marvell,armada388", + "marvell,armada385","marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + }; + + serial@12000 { + status = "okay"; + }; + + ethernet@30000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + + mdio@72004 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + usb3@f0000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi new file mode 100644 index 000000000000..564fa5937e25 --- /dev/null +++ b/arch/arm/boot/dts/armada-388.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada 388 SoC. + * + * Copyright (C) 2015 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * + * The main difference with the Armada 385 is that the 388 can handle two more + * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl + * property and the name of the SoC, and add the second SATA host which control + * the 2 other ports. + */ + +#include "armada-385.dtsi" + +/ { + model = "Marvell Armada 388 family SoC"; + compatible = "marvell,armada388", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6828-pinctrl"; + }; + + sata@e0000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>; + status = "disabled"; + }; + + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 2a9f4caac643..1dff30a81e24 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -31,8 +65,7 @@ }; soc { - compatible = "marvell,armada380-mbus", "marvell,armada370-mbus", - "simple-bus"; + compatible = "marvell,armada380-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; controller = <&mbusc>; @@ -173,7 +206,7 @@ status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; @@ -193,9 +226,94 @@ status = "disabled"; }; - pinctrl { - compatible = "marvell,mv88f6820-pinctrl"; + pinctrl: pinctrl@18000 { reg = <0x18000 0x20>; + + ge0_rgmii_pins: ge-rgmii-pins-0 { + marvell,pins = "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", + "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge-rgmii-pins-1 { + marvell,pins = "mpp21", "mpp27", "mpp28", + "mpp29", "mpp30", "mpp31", + "mpp32", "mpp37", "mpp38", + "mpp39", "mpp40", "mpp41"; + marvell,function = "ge1"; + }; + + i2c0_pins: i2c-pins-0 { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "ge"; + }; + + ref_clk0_pins: ref-clk-pins-0 { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + + ref_clk1_pins: ref-clk-pins-1 { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + + spi0_pins: spi-pins-0 { + marvell,pins = "mpp22", "mpp23", "mpp24", + "mpp25"; + marvell,function = "spi0"; + }; + + spi1_pins: spi-pins-1 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59"; + marvell,function = "spi1"; + }; + + uart0_pins: uart-pins-0 { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "ua0"; + }; + + uart1_pins: uart-pins-1 { + marvell,pins = "mpp19", "mpp20"; + marvell,function = "ua1"; + }; + + sdhci_pins: sdhci-pins { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp52", "mpp53", "mpp54", + "mpp55", "mpp57", "mpp58", + "mpp59"; + marvell,function = "sd0"; + }; + + sata0_pins: sata-pins-0 { + marvell,pins = "mpp20"; + marvell,function = "sata0"; + }; + + sata1_pins: sata-pins-1 { + marvell,pins = "mpp19"; + marvell,function = "sata1"; + }; + + sata2_pins: sata-pins-2 { + marvell,pins = "mpp47"; + marvell,function = "sata2"; + }; + + sata3_pins: sata-pins-3 { + marvell,pins = "mpp44"; + marvell,function = "sata3"; + }; }; gpio0: gpio@18100 { @@ -373,7 +491,7 @@ status = "disabled"; }; - mdio { + mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index ca0200e20751..c1fbab243609 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -3,16 +3,50 @@ * * Note: this board is shipped with a new generation boot loader that * remaps internal registers at 0xf1000000. Therefore, if earlyprintk - * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be - * used. + * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the + * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used. * * Copyright (C) 2013 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -60,10 +94,12 @@ }; internal-regs { + /* UART0 */ serial@12000 { status = "okay"; }; + /* UART1 */ serial@12100 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 42ddb2864365..48bdafe17526 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -8,9 +8,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index ea8673647494..206aebba01be 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -8,9 +8,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index a2ef93c1eb10..5fb3c8b687cf 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 7e291e2ef4b3..56f958eb1ede 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -5,9 +5,43 @@ * * Lior Amsalem <alior@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 281ccd24295c..6e6d0f04bf2b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP MV78230 SoC that are not * common to all Armada XP SoCs. diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index d7a8d0b0f385..4a7cbed79b07 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP MV78260 SoC that are not * common to all Armada XP SoCs. diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 9c40c130d11a..36ce63a96cc9 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP MV78460 SoC that are not * common to all Armada XP SoCs. diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index fc8bdfcd2348..99cb9a8401b4 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 6f6b0916df48..0c76d9f05fd0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 749fdba5a642..e9fb225169aa 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 62c3ba958b39..82917236a2fb 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -8,9 +8,43 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Ben Dooks <ben.dooks@codethink.co.uk> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP SoC that are not * common to all Armada SoCs. diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index e087a93bea26..1f67bb4c144e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -695,6 +695,16 @@ }; }; + ac97 { + pinctrl_ac97: ac97-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -823,6 +833,17 @@ status = "disabled"; }; + ac97: sound@fffa0000 { + compatible = "atmel,at91sam9263-ac97c"; + reg = <0xfffa0000 0x4000>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ac97>; + clocks = <&ac97_clk>; + clock-names = "ac97_clk"; + status = "disabled"; + }; + macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 13bb24ea971a..9575c0d895c9 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -54,7 +54,7 @@ status = "okay"; wm8904: codec@1a { - compatible = "wm8904"; + compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 3a9f6fa4a36a..bd16bd360272 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -53,6 +53,8 @@ }; usb2: gadget@f803c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -80,6 +82,13 @@ <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; + + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */ + }; + }; }; spi0: spi@f0000000 { diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts new file mode 100644 index 000000000000..49cf59a95572 --- /dev/null +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -0,0 +1,110 @@ +/* + * DTS file for CSR SiRFatlas7 Evaluation Board + * + * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "atlas7.dtsi" + +/ { + model = "CSR SiRFatlas7 Evaluation Board"; + compatible = "sirf,atlas7-cb", "sirf,atlas7"; + + chosen { + bootargs = "console=ttySiRF1,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vpp_reserved: vpp_mem@5e800000 { + compatible = "sirf,reserved-memory"; + reg = <0x5e800000 0x800000>; + }; + + nanddisk_reserved: nanddisk@46000000 { + reg = <0x46000000 0x200000>; + no-map; + }; + }; + + + noc { + mediam { + nand@17050000 { + memory-region = <&nanddisk_reserved>; + }; + }; + + gnssm { + spi1: spi@18200000 { + status = "okay"; + spiflash: macronix@0{ + status = "okay"; + compatible = "macronix,mx25l6405d"; + reg = <0>; + spi-max-frequency = <37500000>; + spi-cpha; + spi-cpol; + #address-cells = <1>; + #size-cells = <1>; + partitions@0 { + label = "myspiboot"; + reg = <0x0 0x800000>; + }; + }; + }; + }; + + btm { + uart6: uart@11000000 { + status = "okay"; + sirf,uart-has-rtscts; + }; + }; + + disp-iobg { + vpp@13110000 { + memory-region = <&vpp_reserved>; + }; + }; + + display0: display@0 { + compatible = "lvds-panel"; + source = "lvds.0"; + + bl-gpios = <&gpio_1 63 0>; + data-lines = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <60000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <220>; + hback-porch = <100>; + hsync-len = <1>; + vback-porch = <10>; + vfront-porch = <25>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi new file mode 100644 index 000000000000..a753178abc85 --- /dev/null +++ b/arch/arm/boot/dts/atlas7.dtsi @@ -0,0 +1,813 @@ +/* + * DTS file for CSR SiRFatlas7 SoC + * + * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,atlas7"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial9 = &usp2; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + }; + }; + + noc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10000000 0x10000000 0xc0000000>; + + gic: interrupt-controller@10301000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10301000 0x1000>, + <0x10302000 0x0100>; + }; + + pmu_regulator: pmu_regulator@10E30020 { + compatible = "sirf,atlas7-pmu-ldo"; + reg = <0x10E30020 0x4>; + ldo: ldo { + regulator-name = "ldo"; + }; + }; + + atlas7_codec: atlas7_codec@10E30000 { + #sound-dai-cells = <0>; + compatible = "sirf,atlas7-codec"; + reg = <0x10E30000 0x400>; + clocks = <&car 62>; + ldo-supply = <&ldo>; + }; + + atlas7_iacc: atlas7_iacc@10D01000 { + #sound-dai-cells = <0>; + compatible = "sirf,atlas7-iacc"; + reg = <0x10D01000 0x100>; + dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>, + <&dmac3 3>, <&dmac3 9>; + dma-names = "rx", "tx0", "tx1", "tx2", "tx3"; + clocks = <&car 62>; + }; + + ipc@13240000 { + compatible = "sirf,atlas7-ipc"; + ranges = <0x13240000 0x13240000 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + + hwspinlock { + compatible = "sirf,hwspinlock"; + reg = <0x13240000 0x00010000>; + + num-spinlocks = <30>; + }; + + ns_m3_rproc@0 { + compatible = "sirf,ns2m30-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 123 0>; + }; + + ns_m3_rproc@1 { + compatible = "sirf,ns2m31-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 126 0>; + }; + + ns_kal_rproc@0 { + compatible = "sirf,ns2kal0-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 124 0>; + }; + + ns_kal_rproc@1 { + compatible = "sirf,ns2kal1-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 127 0>; + }; + }; + + pinctrl: ioc@18880000 { + compatible = "sirf,atlas7-ioc"; + reg = <0x18880000 0x1000>, + <0x10E40000 0x1000>; + }; + + pmipc { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13240000 0x13240000 0x00010000>; + pmipc@0x13240000 { + compatible = "sirf,atlas7-pmipc"; + reg = <0x13240000 0x00010000>; + }; + }; + + dramfw { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10830000 0x10830000 0x18000>; + dramfw@10820000 { + compatible = "sirf,nocfw-dramfw"; + reg = <0x10830000 0x18000>; + }; + }; + + spramfw { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10250000 0x10250000 0x3000>; + spramfw@10820000 { + compatible = "sirf,nocfw-spramfw"; + reg = <0x10250000 0x3000>; + }; + }; + + cpum { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10200000 0x10200000 0x3000>; + cpum@10200000 { + compatible = "sirf,nocfw-cpum"; + reg = <0x10200000 0x3000>; + }; + }; + + cgum { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x18641000 0x18641000 0x3000>, + <0x18620000 0x18620000 0x1000>; + + cgum@18641000 { + compatible = "sirf,nocfw-cgum"; + reg = <0x18641000 0x3000>; + }; + + car: clock-controller@18620000 { + compatible = "sirf,atlas7-car"; + reg = <0x18620000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + gnssm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x18000000 0x18000000 0x0000ffff>, + <0x18010000 0x18010000 0x1000>, + <0x18020000 0x18020000 0x1000>, + <0x18030000 0x18030000 0x1000>, + <0x18040000 0x18040000 0x1000>, + <0x18050000 0x18050000 0x1000>, + <0x18060000 0x18060000 0x1000>, + <0x18100000 0x18100000 0x3000>, + <0x18250000 0x18250000 0x10000>, + <0x18200000 0x18200000 0x1000>; + + dmac0: dma-controller@18000000 { + cell-index = <0>; + compatible = "sirf,atlas7-dmac"; + reg = <0x18000000 0x1000>; + interrupts = <0 12 0>; + clocks = <&car 89>; + dma-channels = <16>; + #dma-cells = <1>; + }; + + gnssmfw@0x18100000 { + compatible = "sirf,nocfw-gnssm"; + reg = <0x18100000 0x3000>; + }; + + uart0: uart@18010000 { + cell-index = <0>; + compatible = "sirf,atlas7-uart"; + reg = <0x18010000 0x1000>; + interrupts = <0 17 0>; + clocks = <&car 90>; + fifosize = <128>; + dmas = <&dmac0 3>, <&dmac0 2>; + dma-names = "rx", "tx"; + }; + + uart1: uart@18020000 { + cell-index = <1>; + compatible = "sirf,atlas7-uart"; + reg = <0x18020000 0x1000>; + interrupts = <0 18 0>; + clocks = <&car 88>; + fifosize = <32>; + }; + + uart2: uart@18030000 { + cell-index = <2>; + compatible = "sirf,atlas7-uart"; + reg = <0x18030000 0x1000>; + interrupts = <0 19 0>; + clocks = <&car 91>; + fifosize = <128>; + dmas = <&dmac0 6>, <&dmac0 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart3: uart@18040000 { + cell-index = <3>; + compatible = "sirf,atlas7-uart"; + reg = <0x18040000 0x1000>; + interrupts = <0 66 0>; + clocks = <&car 92>; + fifosize = <128>; + dmas = <&dmac0 4>, <&dmac0 5>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: uart@18050000 { + cell-index = <4>; + compatible = "sirf,atlas7-uart"; + reg = <0x18050000 0x1000>; + interrupts = <0 69 0>; + clocks = <&car 93>; + fifosize = <128>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart5: uart@18060000 { + cell-index = <5>; + compatible = "sirf,atlas7-uart"; + reg = <0x18060000 0x1000>; + interrupts = <0 71 0>; + clocks = <&car 94>; + fifosize = <128>; + dmas = <&dmac0 8>, <&dmac0 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + dspub@18250000 { + compatible = "dx,cc44p"; + reg = <0x18250000 0x10000>; + interrupts = <0 27 0>; + }; + + spi1: spi@18200000 { + compatible = "sirf,prima2-spi"; + reg = <0x18200000 0x1000>; + interrupts = <0 16 0>; + clocks = <&car 95>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmac0 12>, <&dmac0 13>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + + gpum { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13000000 0x13000000 0x3000>; + gpum@0x13000000 { + compatible = "sirf,nocfw-gpum"; + reg = <0x13000000 0x3000>; + }; + }; + + mediam { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x16000000 0x16000000 0x00200000>, + <0x17020000 0x17020000 0x1000>, + <0x17030000 0x17030000 0x1000>, + <0x17040000 0x17040000 0x1000>, + <0x17050000 0x17050000 0x10000>, + <0x17060000 0x17060000 0x200>, + <0x17060200 0x17060200 0x100>, + <0x17070000 0x17070000 0x200>, + <0x17070200 0x17070200 0x100>, + <0x170A0000 0x170A0000 0x3000>; + + mediam@170A0000 { + compatible = "sirf,nocfw-mediam"; + reg = <0x170A0000 0x3000>; + }; + + gpio_0: gpio_mediam@17040000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas7-gpio"; + reg = <0x17040000 0x1000>; + interrupts = <0 13 0>, <0 14 0>; + clocks = <&car 107>; + clock-names = "gpio0_io"; + gpio-controller; + interrupt-controller; + }; + + nand@17050000 { + compatible = "sirf,atlas7-nand"; + reg = <0x17050000 0x10000>; + interrupts = <0 41 0>; + clocks = <&car 108>, <&car 112>; + clock-names = "nand_io", "nand_nand"; + }; + + sd0: sdhci@16000000 { + cell-index = <0>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x16000000 0x100000>; + interrupts = <0 38 0>; + clocks = <&car 109>, <&car 111>; + clock-names = "core", "iface"; + wp-inverted; + non-removable; + status = "disabled"; + bus-width = <8>; + }; + + sd1: sdhci@16100000 { + cell-index = <1>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x16100000 0x100000>; + interrupts = <0 38 0>; + clocks = <&car 109>, <&car 111>; + clock-names = "core", "iface"; + non-removable; + status = "disabled"; + bus-width = <8>; + }; + + usb0: usb@17060000 { + cell-index = <0>; + compatible = "sirf,atlas7-usb"; + reg = <0x17060000 0x200>; + interrupts = <0 10 0>; + clocks = <&car 113>; + sirf,usbphy = <&usbphy0>; + phy_type = "utmi"; + dr_mode = "otg"; + maximum-speed = "high-speed"; + status = "okay"; + }; + + usb1: usb@17070000 { + cell-index = <1>; + compatible = "sirf,atlas7-usb"; + reg = <0x17070000 0x200>; + interrupts = <0 11 0>; + clocks = <&car 114>; + sirf,usbphy = <&usbphy1>; + phy_type = "utmi"; + dr_mode = "host"; + maximum-speed = "high-speed"; + status = "okay"; + }; + + usbphy0: usbphy@0 { + compatible = "sirf,atlas7-usbphy"; + reg = <0x17060200 0x100>; + clocks = <&car 115>; + status = "okay"; + }; + + usbphy1: usbphy@1 { + compatible = "sirf,atlas7-usbphy"; + reg = <0x17070200 0x100>; + clocks = <&car 116>; + status = "okay"; + }; + + i2c0: i2c@17020000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0x17020000 0x1000>; + interrupts = <0 24 0>; + clocks = <&car 105>; + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + vdifm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13290000 0x13290000 0x3000>, + <0x13300000 0x13300000 0x1000>, + <0x14200000 0x14200000 0x600000>; + + vdifm@13290000 { + compatible = "sirf,nocfw-vdifm"; + reg = <0x13290000 0x3000>; + }; + + gpio_1: gpio_vdifm@13300000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas7-gpio"; + reg = <0x13300000 0x1000>; + interrupts = <0 43 0>, <0 44 0>, <0 45 0>; + clocks = <&car 84>; + clock-names = "gpio1_io"; + gpio-controller; + interrupt-controller; + }; + + sd2: sdhci@14200000 { + cell-index = <2>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14200000 0x100000>; + interrupts = <0 23 0>; + clocks = <&car 70>, <&car 75>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + sd-uhs-sdr50; + vqmmc-supply = <&vqmmc>; + vqmmc: vqmmc@2 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-name = "vqmmc-ldo"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-allow-bypass; + }; + }; + + sd3: sdhci@14300000 { + cell-index = <3>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14300000 0x100000>; + interrupts = <0 23 0>; + clocks = <&car 76>, <&car 81>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + }; + + sd5: sdhci@14500000 { + cell-index = <5>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14500000 0x100000>; + interrupts = <0 39 0>; + clocks = <&car 71>, <&car 76>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + loop-dma; + }; + + sd6: sdhci@14600000 { + cell-index = <6>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14600000 0x100000>; + interrupts = <0 98 0>; + clocks = <&car 72>, <&car 77>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + }; + + sd7: sdhci@14700000 { + cell-index = <7>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14700000 0x100000>; + interrupts = <0 98 0>; + clocks = <&car 72>, <&car 77>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + }; + }; + + audiom { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10d50000 0x10d50000 0x0000ffff>, + <0x10d60000 0x10d60000 0x0000ffff>, + <0x10d80000 0x10d80000 0x0000ffff>, + <0x10d90000 0x10d90000 0x0000ffff>, + <0x10ED0000 0x10ED0000 0x3000>, + <0x10dc8000 0x10dc8000 0x1000>, + <0x10dc0000 0x10dc0000 0x1000>, + <0x10db0000 0x10db0000 0x4000>, + <0x10d40000 0x10d40000 0x1000>, + <0x10d30000 0x10d30000 0x1000>; + + timer@10dc0000 { + compatible = "sirf,atlas7-tick"; + reg = <0x10dc0000 0x1000>; + interrupts = <0 0 0>, + <0 1 0>, + <0 2 0>, + <0 49 0>, + <0 50 0>, + <0 51 0>; + clocks = <&car 47>; + }; + + timerb@10dc8000 { + compatible = "sirf,atlas7-tick"; + reg = <0x10dc8000 0x1000>; + interrupts = <0 74 0>, + <0 75 0>, + <0 76 0>, + <0 77 0>, + <0 78 0>, + <0 79 0>; + clocks = <&car 47>; + }; + + vip0@10db0000 { + compatible = "sirf,atlas7-vip0"; + reg = <0x10db0000 0x2000>; + interrupts = <0 85 0>; + sirf,vip_cma_size = <0xC00000>; + }; + + cvd@10db2000 { + compatible = "sirf,cvd"; + reg = <0x10db2000 0x2000>; + clocks = <&car 46>; + }; + + dmac2: dma-controller@10d50000 { + cell-index = <2>; + compatible = "sirf,atlas7-dmac"; + reg = <0x10d50000 0xffff>; + interrupts = <0 55 0>; + clocks = <&car 60>; + dma-channels = <16>; + #dma-cells = <1>; + }; + + dmac3: dma-controller@10d60000 { + cell-index = <3>; + compatible = "sirf,atlas7-dmac"; + reg = <0x10d60000 0xffff>; + interrupts = <0 56 0>; + clocks = <&car 61>; + dma-channels = <16>; + #dma-cells = <1>; + }; + + adc: adc@10d80000 { + compatible = "sirf,atlas7-adc"; + reg = <0x10d80000 0xffff>; + interrupts = <0 34 0>; + clocks = <&car 49>; + #io-channel-cells = <1>; + }; + + pulsec@10d90000 { + compatible = "sirf,prima2-pulsec"; + reg = <0x10d90000 0xffff>; + interrupts = <0 42 0>; + clocks = <&car 54>; + }; + + audiom@10ED0000 { + compatible = "sirf,nocfw-audiom"; + reg = <0x10ED0000 0x3000>; + interrupts = <0 102 0>; + }; + + usp1: usp@10d30000 { + cell-index = <1>; + reg = <0x10d30000 0x1000>; + fifosize = <512>; + clocks = <&car 58>; + dmas = <&dmac2 6>, <&dmac2 7>; + dma-names = "rx", "tx"; + }; + + usp2: usp@10d40000 { + cell-index = <2>; + reg = <0x10d40000 0x1000>; + interrupts = <0 22 0>; + clocks = <&car 59>; + dmas = <&dmac2 12>, <&dmac2 13>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + ddrm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10820000 0x10820000 0x3000>, + <0x10800000 0x10800000 0x2000>; + ddrm@10820000 { + compatible = "sirf,nocfw-ddrm"; + reg = <0x10820000 0x3000>; + interrupts = <0 105 0>; + }; + + memory-controller@0x10800000 { + compatible = "sirf,atlas7-memc"; + reg = <0x10800000 0x2000>; + }; + + }; + + btm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x11002000 0x11002000 0x0000ffff>, + <0x11010000 0x11010000 0x3000>, + <0x11000000 0x11000000 0x1000>, + <0x11001000 0x11001000 0x1000>; + + dmac4: dma-controller@11002000 { + cell-index = <4>; + compatible = "sirf,atlas7-dmac"; + reg = <0x11002000 0x1000>; + interrupts = <0 99 0>; + clocks = <&car 130>; + dma-channels = <16>; + #dma-cells = <1>; + }; + uart6: uart@11000000 { + cell-index = <6>; + compatible = "sirf,atlas7-bt-uart", + "sirf,atlas7-uart"; + reg = <0x11000000 0x1000>; + interrupts = <0 100 0>; + clocks = <&car 131>, <&car 133>, <&car 134>; + clock-names = "uart", "general", "noc"; + fifosize = <128>; + dmas = <&dmac4 12>, <&dmac4 13>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usp3: usp@11001000 { + compatible = "sirf,atlas7-bt-usp", + "sirf,prima2-usp-pcm"; + cell-index = <3>; + reg = <0x11001000 0x1000>; + fifosize = <512>; + clocks = <&car 132>, <&car 129>, <&car 133>, + <&car 134>, <&car 135>; + clock-names = "usp3_io", "a7ca_btss", "a7ca_io", + "noc_btm_io", "thbtm_io"; + dmas = <&dmac4 0>, <&dmac4 1>; + dma-names = "rx", "tx"; + }; + + btm@11010000 { + compatible = "sirf,nocfw-btm"; + reg = <0x11010000 0x3000>; + }; + }; + + rtcm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x18810000 0x18810000 0x3000>, + <0x18840000 0x18840000 0x1000>, + <0x18890000 0x18890000 0x1000>, + <0x188B0000 0x188B0000 0x10000>, + <0x188D0000 0x188D0000 0x1000>; + rtcm@18810000 { + compatible = "sirf,nocfw-rtcm"; + reg = <0x18810000 0x3000>; + interrupts = <0 109 0>; + }; + + gpio_2: gpio_rtcm@18890000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas7-gpio"; + reg = <0x18890000 0x1000>; + interrupts = <0 47 0>; + gpio-controller; + interrupt-controller; + }; + + rtc-iobg@18840000 { + compatible = "sirf,prima2-rtciobg", + "sirf-prima2-rtciobg-bus", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x18840000 0x1000>; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x100>; + interrupts = <0 52 0>; + }; + pwrc@3000 { + compatible = "sirf,atlas7-pwrc"; + reg = <0x3000 0x100>; + }; + }; + + qspi: flash@188B0000 { + cell-index = <0>; + compatible = "sirf,atlas7-qspi-nor"; + reg = <0x188B0000 0x10000>; + interrupts = <0 15 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + retain@0x188D0000 { + compatible = "sirf,atlas7-retain"; + reg = <0x188D0000 0x1000>; + }; + + }; + disp-iobg { + /* lcdc0 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13100000 0x13100000 0x20000>, + <0x10e10000 0x10e10000 0x10000>; + + lcd@13100000 { + compatible = "sirf,atlas7-lcdc"; + reg = <0x13100000 0x10000>; + interrupts = <0 30 0>; + clocks = <&car 79>; + }; + vpp@13110000 { + compatible = "sirf,atlas7-vpp"; + reg = <0x13110000 0x10000>; + interrupts = <0 31 0>; + clocks = <&car 78>; + resets = <&car 29>; + }; + lvds@10e10000 { + compatible = "sirf,atlas7-lvdsc"; + reg = <0x10e10000 0x10000>; + interrupts = <0 64 0>; + clocks = <&car 54>; + resets = <&car 29>; + }; + + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x12000000 0x12000000 0x1000000>; + + graphics@12000000 { + compatible = "powervr,sgx531"; + reg = <0x12000000 0x1000000>; + interrupts = <0 6 0>; + clocks = <&car 126>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi new file mode 100644 index 000000000000..c20cf537f5a5 --- /dev/null +++ b/arch/arm/boot/dts/axp209.dtsi @@ -0,0 +1,97 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP202/209 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP20X.php + * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf + */ + +&axp209 { + compatible = "x-powers,axp209"; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "ldo1"; + }; + + reg_ldo2: ldo2 { + regulator-name = "ldo2"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 5fc0fae03092..b359c1e6178e 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -23,11 +23,77 @@ reg = <0x00000000 0x08000000>; }; + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:red:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power1 { + label = "bcm53xx:white:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router0 { + label = "bcm53xx:blue:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + label = "bcm53xx:blue:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts new file mode 100644 index 000000000000..946c728c4eb7 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -0,0 +1,60 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Luxul XWC-1000 + * + * Copyright 2014 Luxul Inc. + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "luxul,xwc-1000", "brcm,bcm4708"; + model = "Luxul XWC-1000 (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + axi@18000000 { + nand@28000 { + reg = <0x00028000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 4ed7de1058b7..f18c9d9b2f2c 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -71,7 +71,6 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 12fc2a01e6ab..39910428246a 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -61,7 +61,6 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index fb76378bd511..0ee85ea10bb2 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -61,7 +61,6 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index bbb414fbad65..db9131e03268 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -23,11 +23,77 @@ reg = <0x00000000 0x08000000>; }; + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; aoss { label = "AOSS"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts new file mode 100644 index 000000000000..7d6868acb1c6 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -0,0 +1,37 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-900DHP + * + * Copyright (C) 2015 RafaĹ‚ MiĹ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; + model = "Buffalo WZR-900DHP (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 015a06c67c91..63d00a63cfa6 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -104,7 +104,7 @@ local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&chip CLKID_TWD>; }; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 230df3b1770e..81b670ac494a 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -45,6 +45,11 @@ ranges = <0 0xf7000000 0x1000000>; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; + sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; @@ -71,7 +76,7 @@ local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&chip CLKID_TWD>; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index e2f61f27944e..be5397288d24 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -63,6 +63,14 @@ ranges = <0 0xf7000000 0x1000000>; interrupt-parent = <&gic>; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; @@ -105,7 +113,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; clocks = <&chip CLKID_TWD>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gic: interrupt-controller@ad1000 { diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi new file mode 100644 index 000000000000..490c08075e67 --- /dev/null +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -0,0 +1,113 @@ +/* + * Device Tree Include file for the Conexant Digicolor CX92755 SoC + * + * Author: Baruch Siach <baruch@tkos.co.il> + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +/ { + compatible = "cnxt,cx92755"; + + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + }; + }; + + main_clk: main_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + intc: interrupt-controller@f0000040 { + compatible = "cnxt,cx92755-ic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf0000040 0x40>; + syscon = <&uc_regs>; + }; + + timer@f0000fc0 { + compatible = "cnxt,cx92755-timer"; + reg = <0xf0000fc0 0x40>; + interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>; + clocks = <&main_clk>; + }; + + uc_regs: syscon@f00003a0 { + compatible = "cnxt,cx92755-uc", "syscon"; + reg = <0xf00003a0 0x10>; + }; + + uart0: uart@f0000740 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000740 0x20>; + clocks = <&main_clk>; + interrupts = <44>; + status = "disabled"; + }; + + uart1: uart@f0000760 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000760 0x20>; + clocks = <&main_clk>; + interrupts = <45>; + status = "disabled"; + }; + + uart2: uart@f0000780 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000780 0x20>; + clocks = <&main_clk>; + interrupts = <46>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts new file mode 100644 index 000000000000..f33bf5635d47 --- /dev/null +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -0,0 +1,74 @@ +/* + * Device Tree file for the Conexant Equinox CX92755 EVK + * + * Author: Baruch Siach <baruch@tkos.co.il> + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "cx92755.dtsi" + +/ { + model = "Conexant Equinox CX92755 EVK"; + compatible = "cnxt,equinox", "cnxt,cx92755"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory@0 { + reg = <0 0x8000000>; + device_type = "memory"; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts new file mode 100644 index 000000000000..857d0289ad4d --- /dev/null +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -0,0 +1,129 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dm816x.dtsi" + +/ { + model = "DM8168 EVM"; + compatible = "ti,dm8168-evm", "ti,dm8168"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000 /* 1 GB */ + 0xc0000000 0x40000000>; /* 1 GB */ + }; + + /* FDC6331L controlled by SD_POW pin */ + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dm816x_pinmux { + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */ + DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */ + DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */ + DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ + >; + }; +}; + +&i2c1 { + extgpio0: pcf8575@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + extgpio1: pcf8575@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name= "micron,mt29f2g16aadwp"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + m25p80@0 { + compatible = "w25x32"; + spi-max-frequency = <48000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi new file mode 100644 index 000000000000..50d9d338fbe9 --- /dev/null +++ b/arch/arm/boot/dts/dm816x-clocks.dtsi @@ -0,0 +1,250 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scrm { + main_fapll: main_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x400 0x40>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>, <5>, + <6>, <7>; + clock-output-names = "main_pll_clk1", + "main_pll_clk2", + "main_pll_clk3", + "main_pll_clk4", + "main_pll_clk5", + "main_pll_clk6", + "main_pll_clk7"; + }; + + ddr_fapll: ddr_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x440 0x30>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>; + clock-output-names = "ddr_pll_clk1", + "ddr_pll_clk2", + "ddr_pll_clk3", + "ddr_pll_clk4"; + }; + + video_fapll: video_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x470 0x30>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>; + clock-output-names = "video_pll_clk1", + "video_pll_clk2", + "video_pll_clk3"; + }; + + audio_fapll: audio_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x4a0 0x30>; + clocks = <&main_fapll 7>, < &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>, <5>; + clock-output-names = "audio_pll_clk1", + "audio_pll_clk2", + "audio_pll_clk3", + "audio_pll_clk4", + "audio_pll_clk5"; + }; +}; + +&scrm_clocks { + secure_32k_ck: secure_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + sys_clkin_ck: sys_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; +}; + +/* 0x48180000 */ +&prcm_clocks { + clkout_pre_ck: clkout_pre_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1 + &audio_fapll 1>; + reg = <0x100>; + }; + + clkout_div_ck: clkout_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + reg = <0x100>; + }; + + clkout_ck: clkout_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout_div_ck>; + ti,bit-shift = <7>; + reg = <0x100>; + }; + + /* CM_DPLL clocks p1795 */ + sysclk1_ck: sysclk1_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 1>; + ti,max-div = <7>; + reg = <0x0300>; + }; + + sysclk2_ck: sysclk2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 2>; + ti,max-div = <7>; + reg = <0x0304>; + }; + + sysclk3_ck: sysclk3_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 3>; + ti,max-div = <7>; + reg = <0x0308>; + }; + + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 4>; + ti,max-div = <1>; + reg = <0x030c>; + }; + + sysclk5_ck: sysclk5_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sysclk4_ck>; + ti,max-div = <1>; + reg = <0x0310>; + }; + + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 4>; + ti,dividers = <2>, <4>; + reg = <0x0314>; + }; + + sysclk10_ck: sysclk10_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&ddr_fapll 2>; + ti,max-div = <7>; + reg = <0x0324>; + }; + + sysclk24_ck: sysclk24_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 5>; + ti,max-div = <7>; + reg = <0x03b4>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sysclk2_ck>; + ti,bit-shift = <1>; + reg = <0x15dc>; + }; + + audio_pll_a_ck: audio_pll_a_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&audio_fapll 1>; + ti,max-div = <7>; + reg = <0x035c>; + }; + + sysclk18_ck: sysclk18_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_32k_ck>, <&audio_pll_a_ck>; + reg = <0x0378>; + }; + + timer1_fck: timer1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x0390>; + }; + + timer2_fck: timer2_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x0394>; + }; + + timer3_fck: timer3_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x0398>; + }; + + timer4_fck: timer4_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x039c>; + }; + + timer5_fck: timer5_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x03a0>; + }; + + timer6_fck: timer6_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x03a4>; + }; + + timer7_fck: timer7_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x03a8>; + }; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi new file mode 100644 index 000000000000..d98d0f7de380 --- /dev/null +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -0,0 +1,392 @@ +/* + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/omap.h> + +#include "skeleton.dtsi" + +/ { + compatible = "ti,dm816"; + interrupt-parent = <&intc>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the dm816x interconnect. + * The real dm816x interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "ti,omap3-l3-smx", "simple-bus"; + reg = <0x44000000 0x10000>; + interrupts = <9 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + prcm: prcm@48180000 { + compatible = "ti,dm816-prcm"; + reg = <0x48180000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48140000 { + compatible = "ti,dm816-scrm", "simple-bus"; + reg = <0x48140000 0x21000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48140000 0x21000>; + + dm816x_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x50a>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xf>; + }; + + /* Device Configuration Registers */ + scm_conf: syscon@600 { + compatible = "syscon"; + reg = <0x600 0x110>; + #address-cells = <1>; + #size-cells = <1>; + }; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + + elm: elm@48080000 { + compatible = "ti,816-elm"; + ti,hwmods = "elm"; + reg = <0x48080000 0x2000>; + interrupts = <4>; + }; + + gpio1: gpio@48032000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio1"; + reg = <0x48032000 0x1000>; + interrupts = <97>; + }; + + gpio2: gpio@4804c000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio2"; + reg = <0x4804c000 0x1000>; + interrupts = <99>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x2000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <100>; + gpmc,num-cs = <6>; + gpmc,num-waitpins = <2>; + }; + + i2c1: i2c@48028000 { + compatible = "ti,omap4-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48028000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <70>; + dmas = <&edma 58 &edma 59>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@4802a000 { + compatible = "ti,omap4-i2c"; + ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <71>; + dmas = <&edma 60 &edma 61>; + dma-names = "tx", "rx"; + }; + + intc: interrupt-controller@48200000 { + compatible = "ti,dm816-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + mailbox: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x2000>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; + + mdio: mdio@4a100800 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a100800 0x100>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + phy1: ethernet-phy@1 { + reg = <2>; + }; + }; + + eth0: ethernet@4a100000 { + compatible = "ti,dm816-emac"; + ti,hwmods = "emac0"; + reg = <0x4a100000 0x800 + 0x4a100900 0x3700>; + clocks = <&sysclk24_ck>; + syscon = <&scm_conf>; + ti,davinci-ctrl-reg-offset = <0>; + ti,davinci-ctrl-mod-reg-offset = <0x900>; + ti,davinci-ctrl-ram-offset = <0x2000>; + ti,davinci-ctrl-ram-size = <0x2000>; + interrupts = <40 41 42 43>; + phy-handle = <&phy0>; + }; + + eth1: ethernet@4a120000 { + compatible = "ti,dm816-emac"; + ti,hwmods = "emac1"; + reg = <0x4a120000 0x4000>; + clocks = <&sysclk24_ck>; + syscon = <&scm_conf>; + ti,davinci-ctrl-reg-offset = <0>; + ti,davinci-ctrl-mod-reg-offset = <0x900>; + ti,davinci-ctrl-ram-offset = <0x2000>; + ti,davinci-ctrl-ram-size = <0x2000>; + interrupts = <44 45 46 47>; + phy-handle = <&phy1>; + }; + + mcspi1: spi@48030000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <65>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi1"; + dmas = <&edma 16 &edma 17 + &edma 18 &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x48060000 0x11000>; + ti,hwmods = "mmc1"; + interrupts = <64>; + dmas = <&edma 24 &edma 25>; + dma-names = "tx", "rx"; + }; + + timer1: timer@4802e000 { + compatible = "ti,dm816-timer"; + reg = <0x4802e000 0x2000>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,dm816-timer"; + reg = <0x48040000 0x2000>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,dm816-timer"; + reg = <0x48042000 0x2000>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,dm816-timer"; + reg = <0x48044000 0x2000>; + interrupts = <92>; + ti,hwmods = "timer4"; + }; + + timer5: timer@48046000 { + compatible = "ti,dm816-timer"; + reg = <0x48046000 0x2000>; + interrupts = <93>; + ti,hwmods = "timer5"; + }; + + timer6: timer@48048000 { + compatible = "ti,dm816-timer"; + reg = <0x48048000 0x2000>; + interrupts = <94>; + ti,hwmods = "timer6"; + }; + + timer7: timer@4804a000 { + compatible = "ti,dm816-timer"; + reg = <0x4804a000 0x2000>; + interrupts = <95>; + ti,hwmods = "timer7"; + }; + + uart1: uart@48020000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + reg = <0x48020000 0x2000>; + clock-frequency = <48000000>; + interrupts = <72>; + dmas = <&edma 26 &edma 27>; + dma-names = "tx", "rx"; + }; + + uart2: uart@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + reg = <0x48022000 0x2000>; + clock-frequency = <48000000>; + interrupts = <73>; + dmas = <&edma 28 &edma 29>; + dma-names = "tx", "rx"; + }; + + uart3: uart@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + reg = <0x48024000 0x2000>; + clock-frequency = <48000000>; + interrupts = <74>; + dmas = <&edma 30 &edma 31>; + dma-names = "tx", "rx"; + }; + + /* NOTE: USB needs a transceiver driver for phys to work */ + usb: usb_otg_hs@47401000 { + compatible = "ti,am33xx-usb"; + reg = <0x47401000 0x400000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + ti,hwmods = "usb_otg_hs"; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + status = "disabled"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + }; + }; + + wd_timer2: wd_timer@480c2000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer"; + reg = <0x480c2000 0x1000>; + interrupts = <0>; + }; + }; +}; + +#include "dm816x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index ad4118f7e1a6..746cddb1b8f5 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -26,6 +26,16 @@ regulator-max-microvolt = <3300000>; }; + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + vtt_fixed: fixedregulator-vtt { compatible = "regulator-fixed"; regulator-name = "vtt_fixed"; @@ -391,6 +401,19 @@ }; }; }; + + pcf_gpio_21: gpio@21 { + compatible = "ti,pcf8575"; + reg = <0x21>; + lines-initial-states = <0x1408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; &i2c2 { @@ -520,6 +543,14 @@ }; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 63f8b007bdc5..5827fedafd43 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1111,7 +1111,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - id = <1>; ti,hwmods = "pcie1-phy"; }; @@ -1132,7 +1131,6 @@ "div-clk", "phy-div"; #phy-cells = <0>; ti,hwmods = "pcie2-phy"; - id = <2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 89085d066c65..4d8711713610 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra72x.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "TI DRA722"; @@ -24,6 +25,16 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; }; &dra7_pmx_core { @@ -121,6 +132,18 @@ 0x418 (MUX_MODE15) /* wakeup0.off */ >; }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + >; + }; }; &i2c1 { @@ -243,6 +266,18 @@ ti,palmas-long-press-seconds = <6>; }; }; + + pcf_gpio_21: gpio@21 { + compatible = "ti,pcf8575"; + reg = <0x21>; + lines-initial-states = <0x1408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; &uart1 { @@ -345,6 +380,14 @@ phy-supply = <&ldo4_reg>; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; @@ -461,3 +504,68 @@ pinctrl-0 = <&dcan1_pins_default>; pinctrl-1 = <&dcan1_pins_sleep>; }; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 24822aa98057..1d483c1c8b48 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Monk board"; @@ -37,9 +38,7 @@ compatible = "gpio-keys"; power_key { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -109,6 +108,13 @@ }; }; }; + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_reg>; + min-microvolt = <1100000>; + max-microvolt = <2700000>; + }; }; &adc { @@ -134,6 +140,17 @@ }; }; +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; @@ -420,6 +437,46 @@ status = "okay"; }; +&ppmu_dmc0 { + status = "okay"; + + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; +}; + +&ppmu_dmc1 { + status = "okay"; + + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; +}; + +&ppmu_leftbus { + status = "okay"; + + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; +}; + +&ppmu_rightbus { + status = "okay"; + + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; +}; + &xusbxti { clock-frequency = <24000000>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 80aa8b4c4a3d..0b9906880c0c 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Rinato board"; @@ -37,9 +38,7 @@ compatible = "gpio-keys"; power_key { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -100,6 +99,13 @@ }; }; }; + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_reg>; + min-microvolt = <1100000>; + max-microvolt = <2700000>; + }; }; &adc { @@ -125,6 +131,87 @@ }; }; +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&dsi_0 { + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo6_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <250000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 0>; + te-gpios = <&gpx0 6 0>; + power-on-delay= <30>; + power-off-delay= <120>; + reset-delay = <5>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <29>; + panel-height-mm = <29>; + + display-timings { + timing-0 { + clock-frequency = <0>; + hactive = <320>; + vactive = <320>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <1>; + vfront-porch = <150>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&fimd { + status = "okay"; + + i80-if-timings { + cs-setup = <0>; + wr-setup = <0>; + wr-act = <1>; + wr-hold = <0>; + }; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; @@ -523,6 +610,46 @@ status = "okay"; }; +&ppmu_dmc0 { + status = "okay"; + + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; +}; + +&ppmu_dmc1 { + status = "okay"; + + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; +}; + +&ppmu_leftbus { + status = "okay"; + + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; +}; + +&ppmu_rightbus { + status = "okay"; + + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; +}; + &xusbxti { clock-frequency = <24000000>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 22465494b796..277b48b0b6f9 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -141,26 +141,31 @@ pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; + #power-domain-cells = <0>; }; pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; + #power-domain-cells = <0>; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; + #power-domain-cells = <0>; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; + #power-domain-cells = <0>; }; pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; }; cmu: clock-controller@10030000 { @@ -235,7 +240,7 @@ interrupts = <0 84 0>, <0 85 0>, <0 86 0>; clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -245,7 +250,7 @@ reg = <0x11C80000 0x10000>; interrupts = <0 83 0>; samsung,phy-type = <0>; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; @@ -255,6 +260,17 @@ status = "disabled"; }; + hsotg: hsotg@12480000 { + compatible = "snps,dwc2"; + reg = <0x12480000 0x20000>; + interrupts = <0 141 0>; + clocks = <&cmu CLK_USBOTG>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + mshc_0: mshc@12510000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12510000 0x1000>; @@ -279,6 +295,16 @@ status = "disabled"; }; + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos3250-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + amba { compatible = "arm,amba-bus"; #address-cells = <1>; @@ -327,7 +353,7 @@ interrupts = <0 102 0>; clock-names = "mfc", "sclk_mfc"; clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; - samsung,power-domain = <&pd_mfc>; + power-domains = <&pd_mfc>; status = "disabled"; }; @@ -515,6 +541,80 @@ compatible = "arm,cortex-a7-pmu"; interrupts = <0 18 0>, <0 19 0>; }; + + ppmu_dmc0: ppmu_dmc0@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + status = "disabled"; + }; + + ppmu_dmc1: ppmu_dmc1@106b0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106b0000 0x2000>; + status = "disabled"; + }; + + ppmu_cpu: ppmu_cpu@106c0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106c0000 0x2000>; + status = "disabled"; + }; + + ppmu_rightbus: ppmu_rightbus@112a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x112a0000 0x2000>; + clocks = <&cmu CLK_PPMURIGHT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_leftbus: ppmu_leftbus0@116a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x116a0000 0x2000>; + clocks = <&cmu CLK_PPMULEFT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_camif: ppmu_camif@11ac0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11ac0000 0x2000>; + clocks = <&cmu CLK_PPMUCAMIF>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_lcd0: ppmu_lcd0@11e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11e40000 0x2000>; + clocks = <&cmu CLK_PPMULCD0>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_fsys: ppmu_fsys@12630000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12630000 0x2000>; + clocks = <&cmu CLK_PPMUFILE>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_g3d: ppmu_g3d@13220000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13220000 0x2000>; + clocks = <&cmu CLK_PPMUG3D>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_mfc: ppmu_mfc@13660000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13660000 0x2000>; + clocks = <&cmu CLK_PPMUMFC_L>; + clock-names = "ppmu"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index cb6001085f1a..76173cacd450 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -79,41 +79,49 @@ compatible = "samsung,s5pv210-mipi-video-phy"; reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; + #power-domain-cells = <0>; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; + #power-domain-cells = <0>; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; + #power-domain-cells = <0>; }; pd_tv: tv-power-domain@10023C20 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; + #power-domain-cells = <0>; }; pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; + #power-domain-cells = <0>; }; pd_gps: gps-power-domain@10023CE0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; + #power-domain-cells = <0>; }; pd_gps_alive: gps-alive-power-domain@10023D00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; + #power-domain-cells = <0>; }; gic: interrupt-controller@10490000 { @@ -150,7 +158,7 @@ compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; interrupts = <0 79 0>; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; @@ -175,7 +183,7 @@ interrupts = <0 84 0>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -186,7 +194,7 @@ interrupts = <0 85 0>; clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -197,7 +205,7 @@ interrupts = <0 86 0>; clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -208,7 +216,7 @@ interrupts = <0 87 0>; clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -220,7 +228,7 @@ clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; clock-names = "csis", "sclk_csis"; bus-width = <4>; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; phys = <&mipi_phy 0>; phy-names = "csis"; status = "disabled"; @@ -235,7 +243,7 @@ clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; clock-names = "csis", "sclk_csis"; bus-width = <2>; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; phys = <&mipi_phy 2>; phy-names = "csis"; status = "disabled"; @@ -400,7 +408,7 @@ compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; interrupts = <0 94 0>; - samsung,power-domain = <&pd_mfc>; + power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; clock-names = "mfc", "sclk_mfc"; status = "disabled"; @@ -650,8 +658,116 @@ interrupts = <11 0>, <11 1>, <11 2>; clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; + + ppmu_dmc0: ppmu_dmc0@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + clocks = <&clock CLK_PPMUDMC0>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_dmc1: ppmu_dmc1@106b0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106b0000 0x2000>; + clocks = <&clock CLK_PPMUDMC1>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_cpu: ppmu_cpu@106c0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106c0000 0x2000>; + clocks = <&clock CLK_PPMUCPU>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_acp: ppmu_acp@10ae0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106e0000 0x2000>; + status = "disabled"; + }; + + ppmu_rightbus: ppmu_rightbus@112a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x112a0000 0x2000>; + clocks = <&clock CLK_PPMURIGHT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_leftbus: ppmu_leftbus0@116a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x116a0000 0x2000>; + clocks = <&clock CLK_PPMULEFT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_camif: ppmu_camif@11ac0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11ac0000 0x2000>; + clocks = <&clock CLK_PPMUCAMIF>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_lcd0: ppmu_lcd0@11e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11e40000 0x2000>; + clocks = <&clock CLK_PPMULCD0>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_fsys: ppmu_g3d@12630000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12630000 0x2000>; + status = "disabled"; + }; + + ppmu_image: ppmu_image@12aa0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12aa0000 0x2000>; + clocks = <&clock CLK_PPMUIMAGE>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_tv: ppmu_tv@12e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12e40000 0x2000>; + clocks = <&clock CLK_PPMUTV>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_g3d: ppmu_g3d@13220000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13220000 0x2000>; + clocks = <&clock CLK_PPMUG3D>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_mfc_left: ppmu_mfc_left@13660000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13660000 0x2000>; + clocks = <&clock CLK_PPMUMFC_L>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_mfc_right: ppmu_mfc_right@13670000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13670000 0x2000>; + clocks = <&clock CLK_PPMUMFC_R>; + clock-names = "ppmu"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a406df3d6df8..3d6652a4b6cb 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -92,6 +92,7 @@ hsotg@12480000 { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 6effb13f98a6..b57e6b82ea20 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -72,6 +72,7 @@ hsotg@12480000 { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 8e45ea44317e..67c832c9dcf1 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -79,6 +79,7 @@ pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; }; l2c: l2-cache-controller@10502000 { @@ -201,4 +202,12 @@ samsung,lcd-wb; }; }; + + ppmu_lcd1: ppmu_lcd1@12240000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12240000 0x2000>; + clocks = <&clock CLK_PPMULCD1>; + clock-names = "ppmu"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 2c43d1859308..de80b5bba204 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -402,6 +402,7 @@ }; hsotg@12480000 { + dr_mode = "peripheral"; status = "okay"; vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 5fbb01335a0f..21f748083586 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -24,6 +25,7 @@ i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; i2c11 = &i2c_max77693; + i2c12 = &i2c_max77693_fuel; }; memory { @@ -57,15 +59,6 @@ #address-cells = <1>; #size-cells = <0>; - vemmc_reg: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; - enable-active-high; - }; - cam_io_reg: voltage-regulator-1 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_A"; @@ -93,16 +86,6 @@ enable-active-high; }; - cam_isp_core_reg: voltage-regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "CAM_ISP_CORE_1.2V_EN"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpm0 3 0>; - enable-active-high; - regulator-always-on; - }; - ps_als_reg: voltage-regulator-5 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; @@ -204,6 +187,25 @@ }; }; + i2c@138A0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: wm1811@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + DCVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + wlf,ldo1ena = <&gpj0 4 0>; + }; + }; + i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -226,7 +228,6 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; - regulator-mem-on; }; ldo2_reg: ldo2 { @@ -235,7 +236,9 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; - regulator-mem-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo3_reg: ldo3 { @@ -244,7 +247,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; - regulator-mem-on; }; ldo4_reg: ldo4 { @@ -253,7 +255,6 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; - regulator-mem-on; }; ldo5_reg: ldo5 { @@ -262,7 +263,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; - regulator-mem-on; }; ldo6_reg: ldo6 { @@ -271,7 +271,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; - regulator-mem-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo7_reg: ldo7 { @@ -280,7 +282,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; - regulator-mem-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo8_reg: ldo8 { @@ -288,7 +292,9 @@ regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: ldo9 { @@ -296,7 +302,6 @@ regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-mem-idle; }; ldo10_reg: ldo10 { @@ -304,7 +309,9 @@ regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: ldo11 { @@ -313,7 +320,9 @@ regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo12_reg: ldo12 { @@ -321,7 +330,9 @@ regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: ldo13 { @@ -329,7 +340,6 @@ regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo14_reg: ldo14 { @@ -338,7 +348,9 @@ regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: ldo15 { @@ -346,7 +358,9 @@ regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-mem-off; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo16_reg: ldo16 { @@ -354,7 +368,9 @@ regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-off; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo17_reg: ldo17 { @@ -362,7 +378,6 @@ regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-mem-idle; }; ldo18_reg: ldo18 { @@ -370,7 +385,6 @@ regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo19_reg: ldo19 { @@ -378,7 +392,6 @@ regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo20_reg: ldo20 { @@ -386,7 +399,6 @@ regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo21_reg: ldo21 { @@ -394,7 +406,7 @@ regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-mem-idle; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; ldo22_reg: ldo22 { @@ -402,6 +414,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo23_reg: ldo23 { @@ -409,7 +422,6 @@ regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-mem-idle; }; ldo24_reg: ldo24 { @@ -417,7 +429,6 @@ regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo25_reg: ldo25 { @@ -425,7 +436,6 @@ regulator-name = "LCD_VCC_3.3V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-mem-idle; }; ldo26_reg: ldo26 { @@ -433,7 +443,6 @@ regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-mem-idle; }; buck1_reg: buck1 { @@ -443,7 +452,9 @@ regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: buck2 { @@ -453,7 +464,9 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck3_reg: buck3 { @@ -463,7 +476,9 @@ regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: buck4 { @@ -472,7 +487,9 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: buck5 { @@ -504,6 +521,7 @@ regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; buck9_reg: buck9 { @@ -511,7 +529,7 @@ regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; - regulator-mem-off; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; }; }; }; @@ -550,6 +568,32 @@ haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + }; + }; + + i2c_max77693_fuel: i2c-gpio-3 { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693-fuel-gauge@36 { + compatible = "maxim,max17047"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x36>; }; }; @@ -558,7 +602,7 @@ broken-cd; non-removable; card-detect-delay = <200>; - vmmc-supply = <&vemmc_reg>; + vmmc-supply = <&ldo22_reg>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -722,8 +766,8 @@ status = "okay"; assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, + <&clock CLK_XUSBXTI>; fimc_0: fimc@11800000 { status = "okay"; @@ -839,6 +883,24 @@ }; }; + i2s0: i2s@03830000 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + sound { + compatible = "samsung,trats2-audio"; + samsung,i2s-controller = <&i2s0>; + samsung,model = "Trats2"; + samsung,audio-codec = <&wm1811>; + samsung,audio-routing = + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP"; + }; + exynos-usbphy@125B0000 { status = "okay"; }; @@ -846,6 +908,7 @@ hsotg@12480000 { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; status = "okay"; }; @@ -866,6 +929,51 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&ppmu_dmc0 { + status = "okay"; + + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; +}; + +&ppmu_dmc1 { + status = "okay"; + + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; +}; + +&ppmu_leftbus { + status = "okay"; + + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; +}; + +&ppmu_rightbus { + status = "okay"; + + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; +}; + &pinctrl_0 { pinctrl-names = "default"; pinctrl-0 = <&sleep0>; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index c1c9b37340d9..5caea996e090 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -131,36 +131,43 @@ pd_cam: cam-power-domain@10024000 { compatible = "samsung,exynos4210-pd"; reg = <0x10024000 0x20>; + #power-domain-cells = <0>; }; pd_tv: tv-power-domain@10024020 { compatible = "samsung,exynos4210-pd"; reg = <0x10024020 0x20>; + #power-domain-cells = <0>; }; pd_mfc: mfc-power-domain@10024040 { compatible = "samsung,exynos4210-pd"; reg = <0x10024040 0x20>; + #power-domain-cells = <0>; }; pd_g3d: g3d-power-domain@10024060 { compatible = "samsung,exynos4210-pd"; reg = <0x10024060 0x20>; + #power-domain-cells = <0>; }; pd_lcd0: lcd0-power-domain@10024080 { compatible = "samsung,exynos4210-pd"; reg = <0x10024080 0x20>; + #power-domain-cells = <0>; }; pd_isp0: isp0-power-domain@100240A0 { compatible = "samsung,exynos4210-pd"; reg = <0x100240A0 0x20>; + #power-domain-cells = <0>; }; pd_isp1: isp1-power-domain@100240E0 { compatible = "samsung,exynos4210-pd"; reg = <0x100240E0 0x20>; + #power-domain-cells = <0>; }; cmu: clock-controller@10030000 { @@ -234,6 +241,33 @@ interrupts = <0 240 0>; }; + fimd: fimd@11C00000 { + compatible = "samsung,exynos4415-fimd"; + reg = <0x11C00000 0x30000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0 84 0>, <0 85 0>, <0 86 0>; + clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sysreg_system_controller>; + status = "disabled"; + }; + + dsi_0: dsi@11C80000 { + compatible = "samsung,exynos4415-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <0 83 0>; + samsung,phy-type = <0>; + samsung,power-domain = <&pd_lcd0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 8bc97c415c9a..f5e0ae780d6c 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -52,6 +52,7 @@ pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; }; l2c: l2-cache-controller@10502000 { @@ -209,7 +210,7 @@ compatible = "samsung,exynos4212-fimc-lite"; reg = <0x12390000 0x1000>; interrupts = <0 105 0>; - samsung,power-domain = <&pd_isp>; + power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>; clock-names = "flite"; status = "disabled"; @@ -219,7 +220,7 @@ compatible = "samsung,exynos4212-fimc-lite"; reg = <0x123A0000 0x1000>; interrupts = <0 106 0>; - samsung,power-domain = <&pd_isp>; + power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE1>; clock-names = "flite"; status = "disabled"; @@ -229,7 +230,7 @@ compatible = "samsung,exynos4212-fimc-is", "simple-bus"; reg = <0x12000000 0x260000>; interrupts = <0 90 0>, <0 95 0>; - samsung,power-domain = <&pd_isp>; + power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>, <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, <&clock CLK_PPMUISPMX>, @@ -239,7 +240,7 @@ <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>, <&clock CLK_DIV_MCUISP0>, <&clock CLK_DIV_MCUISP1>, - <&clock CLK_SCLK_UART_ISP>, + <&clock CLK_UART_ISP_SCLK>, <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, <&clock CLK_ACLK400_MCUISP>, <&clock CLK_DIV_ACLK400_MCUISP>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index effaf2af41bc..b9aeec430527 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -33,6 +33,8 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -540,6 +542,13 @@ }; &pinctrl_0 { + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + ec_irq: ec-irq { samsung,pins = "gpx1-6"; samsung,pin-function = <0>; @@ -575,6 +584,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index d75c89d7666a..9bb1b0b738f5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -93,11 +93,13 @@ pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; + #power-domain-cells = <0>; }; pd_mfc: mfc-power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; + #power-domain-cells = <0>; }; clock: clock-controller@10010000 { @@ -222,7 +224,7 @@ compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; - samsung,power-domain = <&pd_mfc>; + power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; }; @@ -682,7 +684,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; }; @@ -691,7 +693,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; }; @@ -700,7 +702,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <0 87 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; }; @@ -709,7 +711,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9a050e19a4dc..c47bb70665c1 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" / { @@ -53,7 +54,7 @@ compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq>; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -61,6 +62,15 @@ linux,code = <KEY_POWER>; gpio-key,wakeup; }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; }; memory { @@ -192,6 +202,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -201,6 +214,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -210,6 +226,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -219,6 +238,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -227,6 +249,9 @@ regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck6_reg: BUCK6 { @@ -236,6 +261,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -244,6 +272,9 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck8_reg: BUCK8 { @@ -252,6 +283,9 @@ regulator-max-microvolt = <2850000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck9_reg: BUCK9 { @@ -260,6 +294,9 @@ regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck10_reg: BUCK10 { @@ -268,6 +305,9 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1_reg: LDO1 { @@ -275,6 +315,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo2_reg: LDO2 { @@ -288,6 +332,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; vqmmc_sdcard: ldo4_reg: LDO4 { @@ -295,6 +343,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -302,6 +353,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -309,6 +363,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -322,6 +379,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -329,6 +389,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo10_reg: LDO10 { @@ -336,6 +400,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -343,6 +410,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo12_reg: LDO12 { @@ -350,6 +421,9 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: LDO13 { @@ -357,6 +431,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo14_reg: LDO14 { @@ -364,6 +442,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { @@ -371,6 +452,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -378,6 +462,9 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { @@ -451,6 +538,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo32_reg: LDO32 { @@ -658,6 +748,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; @@ -815,6 +912,7 @@ }; tps65090_fet5: fet5 { regulator-name = "camout"; + regulator-always-on; }; tps65090_fet6: fet6 { regulator-name = "lcd_vdd"; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 6d38f8bfd0e6..9dc2e9773b30 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -178,7 +178,7 @@ interrupts = <0 96 0>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; - samsung,power-domain = <&mfc_pd>; + power-domains = <&mfc_pd>; }; mmc_0: mmc@12200000 { @@ -250,11 +250,13 @@ gsc_pd: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; + #power-domain-cells = <0>; }; isp_pd: power-domain@10044020 { compatible = "samsung,exynos4210-pd"; reg = <0x10044020 0x20>; + #power-domain-cells = <0>; }; mfc_pd: power-domain@10044060 { @@ -263,11 +265,27 @@ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, <&clock CLK_MOUT_USER_ACLK333>; clock-names = "oscclk", "pclk0", "clk0"; + #power-domain-cells = <0>; }; msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; + #power-domain-cells = <0>; + }; + + disp_pd: power-domain@100440C0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>, + <&clock CLK_MOUT_USER_ACLK200_DISP1>, + <&clock CLK_MOUT_SW_ACLK300>, + <&clock CLK_MOUT_USER_ACLK300_DISP1>, + <&clock CLK_MOUT_SW_ACLK400>, + <&clock CLK_MOUT_USER_ACLK400_DISP1>; + clock-names = "oscclk", "pclk0", "clk0", + "pclk1", "clk1", "pclk2", "clk2"; }; pinctrl_0: pinctrl@13400000 { @@ -537,6 +555,7 @@ fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; + power-domains = <&disp_pd>; }; adc: adc@12D10000 { @@ -710,6 +729,7 @@ phy = <&hdmiphy>; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; + power-domains = <&disp_pd>; }; hdmiphy: hdmiphy@145D0000 { @@ -722,6 +742,7 @@ interrupts = <0 94 0>; clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "sclk_hdmi"; + power-domains = <&disp_pd>; }; gsc_0: video-scaler@13e00000 { @@ -730,7 +751,7 @@ interrupts = <0 85 0>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; - samsung,power-domain = <&gsc_pd>; + power-domains = <&gsc_pd>; }; gsc_1: video-scaler@13e10000 { @@ -739,7 +760,7 @@ interrupts = <0 86 0>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; - samsung,power-domain = <&gsc_pd>; + power-domains = <&gsc_pd>; }; pmu_system_controller: system-controller@10040000 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts new file mode 100644 index 000000000000..a519c863248d --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,371 @@ +/* + * Hardkernel Odroid XU3 board device tree source + * + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5800.dtsi" + +/ { + model = "Hardkernel Odroid XU3"; + compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + fimd@14400000 { + status = "okay"; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + hsi2c_4: i2c@12CA0000 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + i2c_2: i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; + + rtc@101E0000 { + status = "okay"; + }; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; + +&i2c_0 { + status = "okay"; + + /* A15 cluster: VDD_ARM */ + ina231@40 { + compatible = "ti,ina231"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* memory: VDD_MEM */ + ina231@41 { + compatible = "ti,ina231"; + reg = <0x41>; + shunt-resistor = <10000>; + }; + + /* GPU: VDD_G3D */ + ina231@44 { + compatible = "ti,ina231"; + reg = <0x44>; + shunt-resistor = <10000>; + }; + + /* A7 cluster: VDD_KFC */ + ina231@45 { + compatible = "ti,ina231"; + reg = <0x45>; + shunt-resistor = <10000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index e8fdda827fc9..06737c60d333 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" / { @@ -52,7 +53,7 @@ compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq>; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -60,6 +61,16 @@ linux,code = <KEY_POWER>; gpio-key,wakeup; }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; memory { @@ -191,6 +202,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -200,6 +214,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -209,6 +226,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -218,6 +238,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -226,6 +249,9 @@ regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck6_reg: BUCK6 { @@ -235,6 +261,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -243,6 +272,9 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck8_reg: BUCK8 { @@ -251,6 +283,9 @@ regulator-max-microvolt = <2850000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck9_reg: BUCK9 { @@ -259,6 +294,9 @@ regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck10_reg: BUCK10 { @@ -267,6 +305,9 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1_reg: LDO1 { @@ -274,6 +315,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo2_reg: LDO2 { @@ -287,6 +332,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; vqmmc_sdcard: ldo4_reg: LDO4 { @@ -294,6 +343,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -301,6 +353,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -308,6 +363,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -321,6 +379,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -328,6 +389,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo10_reg: LDO10 { @@ -335,6 +400,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -342,6 +410,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo12_reg: LDO12 { @@ -349,6 +421,9 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: LDO13 { @@ -356,6 +431,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo14_reg: LDO14 { @@ -363,6 +442,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { @@ -370,6 +452,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -377,6 +462,9 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { @@ -450,6 +538,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo32_reg: LDO32 { @@ -646,6 +737,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; @@ -803,6 +901,7 @@ }; tps65090_fet5: fet5 { regulator-name = "camout"; + regulator-always-on; }; tps65090_fet6: fet6 { regulator-name = "lcd_vdd"; diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts new file mode 100644 index 000000000000..eca5e42770fe --- /dev/null +++ b/arch/arm/boot/dts/hip01-ca9x2.dts @@ -0,0 +1,51 @@ +/* + * Hisilicon Ltd. HiP01 SoC + * + * Copyright (C) 2014 Hisilicon Ltd. + * Copyright (C) 2014 Huawei Ltd. + * + * Author: Wang Long <long.wanglong@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +/* First 8KB reserved for secondary core boot */ +/memreserve/ 0x80000000 0x00002000; + +#include "hip01.dtsi" + +/ { + model = "Hisilicon HIP01 Development Board"; + compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "hisilicon,hip01-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi new file mode 100644 index 000000000000..33130f8461c3 --- /dev/null +++ b/arch/arm/boot/dts/hip01.dtsi @@ -0,0 +1,110 @@ +/* + * Hisilicon Ltd. HiP01 SoC + * + * Copyright (c) 2014 Hisilicon Ltd. + * Copyright (c) 2014 Huawei Ltd. + * + * Author: Wang Long <long.wanglong@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + gic: interrupt-controller@1e001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>; + }; + + hisi_refclk144mhz: refclk144mkhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <144000000>; + clock-output-names = "hisi:refclk144khz"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0x10000000 0x20000000>; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + uart0: uart@10001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10001000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 32 4>; + status = "disabled"; + }; + + uart1: uart@10002000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10002000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 33 4>; + status = "disabled"; + }; + + uart2: uart@10003000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10003000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 34 4>; + status = "disabled"; + }; + + uart3: uart@10006000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10006000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 4 4>; + status = "disabled"; + }; + }; + + system-controller@10000000 { + compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; + reg = <0x10000000 0x1000>; + reboot-offset = <0x4>; + }; + + global_timer@0a000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x0a000200 0x100>; + interrupts = <1 11 0xf04>; + clocks = <&hisi_refclk144mhz>; + }; + + local_timer@0a000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x0a000600 0x100>; + interrupts = <1 13 0xf04>; + clocks = <&hisi_refclk144mhz>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index da306c5dd678..bba3f41b89ef 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -59,6 +59,21 @@ linux,default-trigger = "heartbeat"; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_max5821: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "max5821-reg"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + }; }; &cspi1 { @@ -107,6 +122,12 @@ compatible = "dallas,ds1374"; reg = <0x68>; }; + + max5821@38 { + compatible = "maxim,max5821"; + reg = <0x38>; + vref-supply = <®_max5821>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 107d713e1cbe..4b063b68db44 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -464,7 +464,7 @@ }; coda: coda@10023000 { - compatible = "fsl,imx27-vpu"; + compatible = "fsl,imx27-vpu", "cnm,codadx6"; reg = <0x10023000 0x0200>; interrupts = <53>; clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 0e13b4b10a92..279249b8c3f3 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -182,7 +182,6 @@ }; lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; status = "okay"; fsl,lradc-touchscreen-wires = <4>; fsl,ave-ctrl = <4>; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index c5a9a24c280a..93d3ea12328c 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -16,6 +16,14 @@ model = "Armadeus Systems APF51Dev docking/development board"; compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; + backlight@bl1{ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + compatible = "gpio-backlight"; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-on; + }; + display@di1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; @@ -114,6 +122,12 @@ pinctrl-0 = <&pinctrl_hog>; imx51-apf51dev { + pinctrl_backlight: bl1grp { + fsl,pins = < + MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX51_PAD_EIM_EB2__GPIO2_22 0x0C5 diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index a30bddfdbdb6..ff4fa7ecacd8 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -756,7 +756,7 @@ }; vpu: vpu@63ff4000 { - compatible = "fsl,imx53-vpu"; + compatible = "fsl,imx53-vpu", "cnm,coda7541"; reg = <0x63ff4000 0x1000>; interrupts = <9>; clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, @@ -765,6 +765,15 @@ resets = <&src 1>; iram = <&ocram>; }; + + sahara: crypto@63ff8000 { + compatible = "fsl,imx53-sahara"; + reg = <0x63ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; }; ocram: sram@f8000000 { diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts new file mode 100644 index 000000000000..e3713f00e819 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-udoo.dts @@ -0,0 +1,18 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-udoo.dtsi" + +/ { + model = "Udoo i.MX6 Dual-lite Board"; + compatible = "udoo,imx6dl-udoo", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ac2fe732867..f94bf72832af 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -28,7 +28,7 @@ next-level-cache = <&L2>; operating-points = < /* kHz uV */ - 996000 1275000 + 996000 1250000 792000 1175000 396000 1075000 >; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index e3bff2ac00db..c3e64ff3d544 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -8,137 +8,15 @@ * published by the Free Software Foundation. * */ - /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-udoo.dtsi" / { model = "Udoo i.MX6 Quad Board"; compatible = "udoo,imx6q-udoo", "fsl,imx6q"; - - chosen { - stdout-path = &uart2; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -&iomuxc { - imx6q-udoo { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh: usbhgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 - MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - }; }; &sata { status = "okay"; }; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks 201>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 85f72e6b5bad..93ec79bb6b35 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -31,7 +31,7 @@ 1200000 1275000 996000 1250000 852000 1250000 - 792000 1150000 + 792000 1175000 396000 975000 >; fsl,soc-operating-points = < @@ -95,6 +95,8 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; + dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 0a36129152e0..0b28a9d5241e 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -173,6 +173,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -188,6 +193,20 @@ }; }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -265,6 +284,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi new file mode 100644 index 000000000000..1211da894ee9 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -0,0 +1,134 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_h1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ + gpio = <&gpio7 12 0>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + imx6q-udoo { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh: usbhgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; + vbus-supply = <®_usb_h1_vbus>; + clocks = <&clks 201>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 2109d0763c1b..d6c69ec44314 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -339,9 +339,8 @@ <0 3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, - <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, - <&clks IMX6QDL_CLK_OCRAM>; - clock-names = "per", "ahb", "ocram"; + <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; + clock-names = "per", "ahb"; resets = <&src 1>; iram = <&ocram>; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts new file mode 100644 index 000000000000..e3c0b63c2205 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX Sabre Auto Board"; + compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakup; + status = "okay"; +}; + +&iomuxc { + imx6x-sabreauto { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index c108bb451337..32f07d6b4042 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -355,6 +355,28 @@ status = "okay"; }; +&qspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi2>; + status = "okay"; + + flash0: s25fl128s@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; + + flash1: s25fl128s@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; +}; + &ssi2 { status = "okay"; }; @@ -539,6 +561,23 @@ >; }; + pinctrl_qspi2: qspi2grp { + fsl,pins = < + MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 + MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 + MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 + MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 + MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 + MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 + MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 + MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 + MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 + MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 + MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 + MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 + >; + }; + pinctrl_vcc_sd3: vccsd3grp { fsl,pins = < MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index dd81508b919b..9e6e9e2691d5 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -66,6 +66,8 @@ interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts new file mode 100644 index 000000000000..fa02a9aff05e --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts @@ -0,0 +1,173 @@ +/* + * Device Tree file for Seagate Blackarmor NAS220 + * + * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi" + +/ { + model = "Seagate Blackarmor NAS220"; + compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", + "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button@1{ + label = "Reset"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + button@2{ + label = "Power"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-power { + label = "nas220:blue:power"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; + pinctrl-names = "default"; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* + * Serial port routed to connector CN5 + * + * pin 1 - TX (CPU's TX) + * pin 4 - RX (CPU's RX) + * pin 6 - GND + */ +&uart0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-0 = <&pmx_button_reset &pmx_button_power>; + pinctrl-names = "default"; + + pmx_act_sata0: pmx-act-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + + pmx_act_sata1: pmx-act-sata1 { + marvell,pins = "mpp16"; + marvell,function = "sata1"; + }; + + pmx_power_sata0: pmx-power-sata0 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + pmx_power_sata1: pmx-power-sata1 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&i2c0 { + status = "okay"; + + adt7476: thermal@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; +}; + +&nand { + status = "okay"; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 05291f3990d0..8474bffec0ca 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -169,6 +169,10 @@ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; }; &nand { @@ -192,8 +196,8 @@ }; partition@400000 { - label = "uInitrd"; - reg = <0x540000 0x1000000>; + label = "rootfs"; + reg = <0x400000 0x1C00000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/kirkwood-pogo_e02.dts new file mode 100644 index 000000000000..a190080c9c4f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts @@ -0,0 +1,134 @@ +/* + * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02 + * + * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org> + * + * based on information of dts files from + * Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com> + * OpenWrt by Felix Kaechele <heffer@fedoraproject.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Cloud Engines Pogoplug E02"; + compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", + "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "pogo_e02:green:health"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + fault { + label = "pogo_e02:orange:fault"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange + &pmx_led_green >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led-green { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&nand { + chip-delay = <40>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0x5b00000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts deleted file mode 100644 index 5130aeacfca5..000000000000 --- a/arch/arm/boot/dts/marco-evb.dts +++ /dev/null @@ -1,54 +0,0 @@ -/* - * DTS file for CSR SiRFmarco Evaluation Board - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -/dts-v1/; - -/include/ "marco.dtsi" - -/ { - model = "CSR SiRFmarco Evaluation Board"; - compatible = "sirf,marco-cb", "sirf,marco"; - - memory { - reg = <0x40000000 0x60000000>; - }; - - axi { - peri-iobg { - uart1: uart@cc060000 { - status = "okay"; - }; - uart2: uart@cc070000 { - status = "okay"; - }; - i2c0: i2c@cc0e0000 { - status = "okay"; - fpga-cpld@4d { - compatible = "sirf,fpga-cpld"; - reg = <0x4d>; - }; - }; - spi1: spi@cc170000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - pci-iobg { - sd0: sdhci@cd000000 { - bus-width = <8>; - status = "okay"; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi deleted file mode 100644 index fb354225740a..000000000000 --- a/arch/arm/boot/dts/marco.dtsi +++ /dev/null @@ -1,757 +0,0 @@ -/* - * DTS file for CSR SiRFmarco SoC - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -/include/ "skeleton.dtsi" -/ { - compatible = "sirf,marco"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0xa0000000>; - - l2-cache-controller@c0030000 { - compatible = "arm,pl310-cache"; - reg = <0xc0030000 0x1000>; - interrupts = <0 59 0>; - arm,tag-latency = <1 1 1>; - arm,data-latency = <1 1 1>; - arm,filter-ranges = <0x40000000 0x80000000>; - }; - - gic: interrupt-controller@c0011000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xc0011000 0x1000>, - <0xc0010100 0x0100>; - }; - - rstc-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc2000000 0xc2000000 0x1000000>; - - rstc: reset-controller@c2000000 { - compatible = "sirf,marco-rstc"; - reg = <0xc2000000 0x10000>; - #reset-cells = <1>; - }; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc3000000 0xc3000000 0x1000000>; - - clock-controller@c3000000 { - compatible = "sirf,marco-clkc"; - reg = <0xc3000000 0x1000>; - interrupts = <0 3 0>; - }; - - rsc-controller@c3010000 { - compatible = "sirf,marco-rsc"; - reg = <0xc3010000 0x1000>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc4000000 0xc4000000 0x1000000>; - - memory-controller@c4000000 { - compatible = "sirf,marco-memc"; - reg = <0xc4000000 0x10000>; - interrupts = <0 27 0>; - }; - }; - - disp-iobg0 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc5000000 0xc5000000 0x1000000>; - - display0@c5000000 { - compatible = "sirf,marco-lcd"; - reg = <0xc5000000 0x10000>; - interrupts = <0 30 0>; - }; - - vpp0@c5010000 { - compatible = "sirf,marco-vpp"; - reg = <0xc5010000 0x10000>; - interrupts = <0 31 0>; - }; - }; - - disp-iobg1 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc6000000 0xc6000000 0x1000000>; - - display1@c6000000 { - compatible = "sirf,marco-lcd"; - reg = <0xc6000000 0x10000>; - interrupts = <0 62 0>; - }; - - vpp1@c6010000 { - compatible = "sirf,marco-vpp"; - reg = <0xc6010000 0x10000>; - interrupts = <0 63 0>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc8000000 0xc8000000 0x1000000>; - - graphics@c8000000 { - compatible = "powervr,sgx540"; - reg = <0xc8000000 0x1000000>; - interrupts = <0 6 0>; - }; - }; - - multimedia-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc9000000 0xc9000000 0x1000000>; - - multimedia@a0000000 { - compatible = "sirf,marco-video-codec"; - reg = <0xc9000000 0x1000000>; - interrupts = <0 5 0>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xca000000 0xca000000 0x2000000>; - - dspif@ca000000 { - compatible = "sirf,marco-dspif"; - reg = <0xca000000 0x10000>; - interrupts = <0 9 0>; - }; - - gps@ca010000 { - compatible = "sirf,marco-gps"; - reg = <0xca010000 0x10000>; - interrupts = <0 7 0>; - }; - - dsp@cb000000 { - compatible = "sirf,marco-dsp"; - reg = <0xcb000000 0x1000000>; - interrupts = <0 8 0>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xcc000000 0xcc000000 0x2000000>; - - timer@cc020000 { - compatible = "sirf,marco-tick"; - reg = <0xcc020000 0x1000>; - interrupts = <0 0 0>, - <0 1 0>, - <0 2 0>, - <0 49 0>, - <0 50 0>, - <0 51 0>; - }; - - nand@cc030000 { - compatible = "sirf,marco-nand"; - reg = <0xcc030000 0x10000>; - interrupts = <0 41 0>; - }; - - audio@cc040000 { - compatible = "sirf,marco-audio"; - reg = <0xcc040000 0x10000>; - interrupts = <0 35 0>; - }; - - uart0: uart@cc050000 { - cell-index = <0>; - compatible = "sirf,marco-uart"; - reg = <0xcc050000 0x1000>; - interrupts = <0 17 0>; - fifosize = <128>; - status = "disabled"; - }; - - uart1: uart@cc060000 { - cell-index = <1>; - compatible = "sirf,marco-uart"; - reg = <0xcc060000 0x1000>; - interrupts = <0 18 0>; - fifosize = <32>; - status = "disabled"; - }; - - uart2: uart@cc070000 { - cell-index = <2>; - compatible = "sirf,marco-uart"; - reg = <0xcc070000 0x1000>; - interrupts = <0 19 0>; - fifosize = <128>; - status = "disabled"; - }; - - uart3: uart@cc190000 { - cell-index = <3>; - compatible = "sirf,marco-uart"; - reg = <0xcc190000 0x1000>; - interrupts = <0 66 0>; - fifosize = <128>; - status = "disabled"; - }; - - uart4: uart@cc1a0000 { - cell-index = <4>; - compatible = "sirf,marco-uart"; - reg = <0xcc1a0000 0x1000>; - interrupts = <0 69 0>; - fifosize = <128>; - status = "disabled"; - }; - - usp0: usp@cc080000 { - cell-index = <0>; - compatible = "sirf,marco-usp"; - reg = <0xcc080000 0x10000>; - interrupts = <0 20 0>; - status = "disabled"; - }; - - usp1: usp@cc090000 { - cell-index = <1>; - compatible = "sirf,marco-usp"; - reg = <0xcc090000 0x10000>; - interrupts = <0 21 0>; - status = "disabled"; - }; - - usp2: usp@cc0a0000 { - cell-index = <2>; - compatible = "sirf,marco-usp"; - reg = <0xcc0a0000 0x10000>; - interrupts = <0 22 0>; - status = "disabled"; - }; - - dmac0: dma-controller@cc0b0000 { - cell-index = <0>; - compatible = "sirf,marco-dmac"; - reg = <0xcc0b0000 0x10000>; - interrupts = <0 12 0>; - }; - - dmac1: dma-controller@cc160000 { - cell-index = <1>; - compatible = "sirf,marco-dmac"; - reg = <0xcc160000 0x10000>; - interrupts = <0 13 0>; - }; - - vip@cc0c0000 { - compatible = "sirf,marco-vip"; - reg = <0xcc0c0000 0x10000>; - }; - - spi0: spi@cc0d0000 { - cell-index = <0>; - compatible = "sirf,marco-spi"; - reg = <0xcc0d0000 0x10000>; - interrupts = <0 15 0>; - sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@cc170000 { - cell-index = <1>; - compatible = "sirf,marco-spi"; - reg = <0xcc170000 0x10000>; - interrupts = <0 16 0>; - sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@cc0e0000 { - cell-index = <0>; - compatible = "sirf,marco-i2c"; - reg = <0xcc0e0000 0x10000>; - interrupts = <0 24 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@cc0f0000 { - cell-index = <1>; - compatible = "sirf,marco-i2c"; - reg = <0xcc0f0000 0x10000>; - interrupts = <0 25 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - tsc@cc110000 { - compatible = "sirf,marco-tsc"; - reg = <0xcc110000 0x10000>; - interrupts = <0 33 0>; - }; - - gpio: pinctrl@cc120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,marco-pinctrl"; - reg = <0xcc120000 0x10000>; - interrupts = <0 43 0>, - <0 44 0>, - <0 45 0>, - <0 46 0>, - <0 47 0>; - gpio-controller; - interrupt-controller; - - lcd_16pins_a: lcd0_0 { - lcd { - sirf,pins = "lcd_16bitsgrp"; - sirf,function = "lcd_16bits"; - }; - }; - lcd_18pins_a: lcd0_1 { - lcd { - sirf,pins = "lcd_18bitsgrp"; - sirf,function = "lcd_18bits"; - }; - }; - lcd_24pins_a: lcd0_2 { - lcd { - sirf,pins = "lcd_24bitsgrp"; - sirf,function = "lcd_24bits"; - }; - }; - lcdrom_pins_a: lcdrom0_0 { - lcd { - sirf,pins = "lcdromgrp"; - sirf,function = "lcdrom"; - }; - }; - uart0_pins_a: uart0_0 { - uart { - sirf,pins = "uart0grp"; - sirf,function = "uart0"; - }; - }; - uart1_pins_a: uart1_0 { - uart { - sirf,pins = "uart1grp"; - sirf,function = "uart1"; - }; - }; - uart2_pins_a: uart2_0 { - uart { - sirf,pins = "uart2grp"; - sirf,function = "uart2"; - }; - }; - uart2_noflow_pins_a: uart2_1 { - uart { - sirf,pins = "uart2_nostreamctrlgrp"; - sirf,function = "uart2_nostreamctrl"; - }; - }; - spi0_pins_a: spi0_0 { - spi { - sirf,pins = "spi0grp"; - sirf,function = "spi0"; - }; - }; - spi1_pins_a: spi1_0 { - spi { - sirf,pins = "spi1grp"; - sirf,function = "spi1"; - }; - }; - i2c0_pins_a: i2c0_0 { - i2c { - sirf,pins = "i2c0grp"; - sirf,function = "i2c0"; - }; - }; - i2c1_pins_a: i2c1_0 { - i2c { - sirf,pins = "i2c1grp"; - sirf,function = "i2c1"; - }; - }; - pwm0_pins_a: pwm0_0 { - pwm { - sirf,pins = "pwm0grp"; - sirf,function = "pwm0"; - }; - }; - pwm1_pins_a: pwm1_0 { - pwm { - sirf,pins = "pwm1grp"; - sirf,function = "pwm1"; - }; - }; - pwm2_pins_a: pwm2_0 { - pwm { - sirf,pins = "pwm2grp"; - sirf,function = "pwm2"; - }; - }; - pwm3_pins_a: pwm3_0 { - pwm { - sirf,pins = "pwm3grp"; - sirf,function = "pwm3"; - }; - }; - gps_pins_a: gps_0 { - gps { - sirf,pins = "gpsgrp"; - sirf,function = "gps"; - }; - }; - vip_pins_a: vip_0 { - vip { - sirf,pins = "vipgrp"; - sirf,function = "vip"; - }; - }; - sdmmc0_pins_a: sdmmc0_0 { - sdmmc0 { - sirf,pins = "sdmmc0grp"; - sirf,function = "sdmmc0"; - }; - }; - sdmmc1_pins_a: sdmmc1_0 { - sdmmc1 { - sirf,pins = "sdmmc1grp"; - sirf,function = "sdmmc1"; - }; - }; - sdmmc2_pins_a: sdmmc2_0 { - sdmmc2 { - sirf,pins = "sdmmc2grp"; - sirf,function = "sdmmc2"; - }; - }; - sdmmc3_pins_a: sdmmc3_0 { - sdmmc3 { - sirf,pins = "sdmmc3grp"; - sirf,function = "sdmmc3"; - }; - }; - sdmmc4_pins_a: sdmmc4_0 { - sdmmc4 { - sirf,pins = "sdmmc4grp"; - sirf,function = "sdmmc4"; - }; - }; - sdmmc5_pins_a: sdmmc5_0 { - sdmmc5 { - sirf,pins = "sdmmc5grp"; - sirf,function = "sdmmc5"; - }; - }; - i2s_pins_a: i2s_0 { - i2s { - sirf,pins = "i2sgrp"; - sirf,function = "i2s"; - }; - }; - ac97_pins_a: ac97_0 { - ac97 { - sirf,pins = "ac97grp"; - sirf,function = "ac97"; - }; - }; - nand_pins_a: nand_0 { - nand { - sirf,pins = "nandgrp"; - sirf,function = "nand"; - }; - }; - usp0_pins_a: usp0_0 { - usp0 { - sirf,pins = "usp0grp"; - sirf,function = "usp0"; - }; - }; - usp1_pins_a: usp1_0 { - usp1 { - sirf,pins = "usp1grp"; - sirf,function = "usp1"; - }; - }; - usp2_pins_a: usp2_0 { - usp2 { - sirf,pins = "usp2grp"; - sirf,function = "usp2"; - }; - }; - usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 { - usb0_utmi_drvbus { - sirf,pins = "usb0_utmi_drvbusgrp"; - sirf,function = "usb0_utmi_drvbus"; - }; - }; - usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 { - usb1_utmi_drvbus { - sirf,pins = "usb1_utmi_drvbusgrp"; - sirf,function = "usb1_utmi_drvbus"; - }; - }; - warm_rst_pins_a: warm_rst_0 { - warm_rst { - sirf,pins = "warm_rstgrp"; - sirf,function = "warm_rst"; - }; - }; - pulse_count_pins_a: pulse_count_0 { - pulse_count { - sirf,pins = "pulse_countgrp"; - sirf,function = "pulse_count"; - }; - }; - cko0_rst_pins_a: cko0_rst_0 { - cko0_rst { - sirf,pins = "cko0_rstgrp"; - sirf,function = "cko0_rst"; - }; - }; - cko1_rst_pins_a: cko1_rst_0 { - cko1_rst { - sirf,pins = "cko1_rstgrp"; - sirf,function = "cko1_rst"; - }; - }; - }; - - pwm@cc130000 { - compatible = "sirf,marco-pwm"; - reg = <0xcc130000 0x10000>; - }; - - efusesys@cc140000 { - compatible = "sirf,marco-efuse"; - reg = <0xcc140000 0x10000>; - }; - - pulsec@cc150000 { - compatible = "sirf,marco-pulsec"; - reg = <0xcc150000 0x10000>; - interrupts = <0 48 0>; - }; - - pci-iobg { - compatible = "sirf,marco-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xcd000000 0xcd000000 0x1000000>; - - sd0: sdhci@cd000000 { - cell-index = <0>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd000000 0x100000>; - interrupts = <0 38 0>; - status = "disabled"; - }; - - sd1: sdhci@cd100000 { - cell-index = <1>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd100000 0x100000>; - interrupts = <0 38 0>; - status = "disabled"; - }; - - sd2: sdhci@cd200000 { - cell-index = <2>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd200000 0x100000>; - interrupts = <0 23 0>; - status = "disabled"; - }; - - sd3: sdhci@cd300000 { - cell-index = <3>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd300000 0x100000>; - interrupts = <0 23 0>; - status = "disabled"; - }; - - sd4: sdhci@cd400000 { - cell-index = <4>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd400000 0x100000>; - interrupts = <0 39 0>; - status = "disabled"; - }; - - sd5: sdhci@cd500000 { - cell-index = <5>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd500000 0x100000>; - interrupts = <0 39 0>; - status = "disabled"; - }; - - pci-copy@cd900000 { - compatible = "sirf,marco-pcicp"; - reg = <0xcd900000 0x100000>; - interrupts = <0 40 0>; - }; - - rom-interface@cda00000 { - compatible = "sirf,marco-romif"; - reg = <0xcda00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0xc1000000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,marco-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <0 55 0>, - <0 56 0>, - <0 57 0>; - }; - - sysrtc@2000 { - compatible = "sirf,marco-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <0 52 0>, - <0 53 0>, - <0 54 0>; - }; - - pwrc@3000 { - compatible = "sirf,marco-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <0 32 0>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xce000000 0xce000000 0x1000000>; - - usb0: usb@ce000000 { - compatible = "chipidea,ci13611a-marco"; - reg = <0xce000000 0x10000>; - interrupts = <0 10 0>; - }; - - usb1: usb@ce010000 { - compatible = "chipidea,ci13611a-marco"; - reg = <0xce010000 0x10000>; - interrupts = <0 11 0>; - }; - - security@ce020000 { - compatible = "sirf,marco-security"; - reg = <0xce020000 0x10000>; - interrupts = <0 42 0>; - }; - }; - - can-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xd0000000 0xd0000000 0x1000000>; - - can0: can@d0000000 { - compatible = "sirf,marco-can"; - reg = <0xd0000000 0x10000>; - }; - - can1: can@d0010000 { - compatible = "sirf,marco-can"; - reg = <0xd0010000 0x10000>; - }; - }; - - lvds-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xd1000000 0xd1000000 0x1000000>; - - lvds@d1000000 { - compatible = "sirf,marco-lvds"; - reg = <0xd1000000 0x10000>; - interrupts = <0 64 0>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 0da047013120..594a6f3bebda 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -21,10 +21,20 @@ compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; chosen { - bootargs = "earlyprintk"; + bootargs = "console=ttyS0,921600n8 earlyprintk"; + stdout-path = &uart0; }; memory { reg = <0x80000000 0x40000000>; }; + +}; + +&uart0 { + status = "okay"; +}; + +&uart3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index e3c7600ddb38..106b61b10030 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -19,7 +19,7 @@ / { compatible = "mediatek,mt6589"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpus { #address-cells = <1>; @@ -65,6 +65,12 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; }; soc { @@ -76,19 +82,61 @@ timer: timer@10008000 { compatible = "mediatek,mt6577-timer"; reg = <0x10008000 0x80>; - interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6589-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10200100 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, <0x10212000 0x1000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; + + uart0: serial@11006000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11006000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11007000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11007000 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11008000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11008000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11009000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11009000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi index 31e5a0979d78..c69201ffff72 100644 --- a/arch/arm/boot/dts/mt6592.dtsi +++ b/arch/arm/boot/dts/mt6592.dtsi @@ -18,7 +18,7 @@ / { compatible = "mediatek,mt6592"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpus { #address-cells = <1>; @@ -78,21 +78,66 @@ #clock-cells = <0>; }; + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + timer: timer@10008000 { compatible = "mediatek,mt6577-timer"; reg = <0x10008000 0x80>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200220 { + compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10200220 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, <0x10212000 0x1000>; }; -}; + uart0: serial@11002000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11002000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11003000 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + uart2: serial@11004000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11004000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11005000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts index 13cba0e77e08..073e295a1cb4 100644 --- a/arch/arm/boot/dts/mt8127-moose.dts +++ b/arch/arm/boot/dts/mt8127-moose.dts @@ -23,3 +23,7 @@ reg = <0 0x80000000 0 0x40000000>; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index b24c0a2f3c44..aaa786233d93 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -18,7 +18,7 @@ / { compatible = "mediatek,mt8127"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpus { #address-cells = <1>; @@ -64,6 +64,12 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; }; soc { @@ -76,19 +82,61 @@ compatible = "mediatek,mt8127-timer", "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt8127-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, <0 0x10212000 0 0x1000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + + uart0: serial@11006000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11007000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11008000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11009000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index a5adf9742308..36677382bdd8 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -23,3 +23,7 @@ reg = <0 0x80000000 0 0x40000000>; }; }; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 7d56a986358e..a161e99ffcc4 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -18,7 +18,7 @@ / { compatible = "mediatek,mt8135"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpu-map { cluster0 { @@ -86,6 +86,13 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + }; soc { @@ -98,19 +105,62 @@ compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200030 { + compatible = "mediatek,mt8135-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200030 0 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, <0 0x10212000 0 0x1000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + + uart0: serial@11006000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11006000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11007000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11007000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11008000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11008000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11009000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11009000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 6ea6d460db30..4d091ca43e25 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -259,3 +259,61 @@ pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; }; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>; + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <8>; + gpmc,device-width = <1>; + ti,nand-ecc-opt = "sw"; + + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <120>; + gpmc,cs-wr-off-ns = <120>; + + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <120>; + gpmc,adv-wr-off-ns = <120>; + + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <90>; + + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <90>; + + gpmc,page-burst-access-ns = <6>; + gpmc,access-ns = <72>; + gpmc,cycle2cycle-delay-ns = <60>; + + gpmc,rd-cycle-ns = <120>; + gpmc,wr-cycle-ns = <120>; + gpmc,wr-access-ns = <186>; + gpmc,wr-data-mux-bus-ns = <90>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "xloader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "uboot"; + reg = <0x80000 0x1e0000>; + }; + partition@0x260000 { + label = "uboot environment"; + reg = <0x260000 0x40000>; + }; + partition@0x2a0000 { + label = "linux"; + reg = <0x2a0000 0x400000>; + }; + partition@0x6a0000 { + label = "rootfs"; + reg = <0x6a0000 0x1f880000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 9a4a3ab9af78..d9e92b654f85 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -50,7 +50,8 @@ #include "omap-gpmc-smsc911x.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x01000000>; + ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ smsc1: ethernet@gpmc { compatible = "smsc,lan9221", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 655d6e920a86..fb3a69604ed5 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -83,6 +83,41 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; }; + + tv0: connector@1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&opa_out>; + }; + }; + }; + + tv_amp: opa362 { + compatible = "ti,opa362"; + enable-gpios = <&gpio1 23 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + opa_in: endpoint@0 { + remote-endpoint = <&venc_out>; + }; + }; + + port@1 { + reg = <1>; + opa_out: endpoint@0 { + remote-endpoint = <&tv_connector_in>; + }; + }; + }; + }; }; &omap3_pmx_core { @@ -202,11 +237,18 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - }; - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { + twl_audio: audio { + compatible = "ti,twl4030-audio"; + ti,enable-vibra = <1>; + codec { + ti,ramp_delay_value = <3>; + }; + }; + + twl_power: power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; }; }; }; @@ -222,15 +264,23 @@ compatible = "bosch,bmp085"; reg = <0x77>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ }; /* accelerometer */ bma180@41 { compatible = "bosch,bma180"; reg = <0x41>; - interrupt-parent = <&gpio3>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ + }; + + /* gyroscope */ + itg3200@68 { + compatible = "invensense,itg3200"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <24 0>; /* GPIO_56 */ }; /* leds */ @@ -281,7 +331,7 @@ compatible = "ti,tsc2007"; reg = <0x48>; interrupt-parent = <&gpio6>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; @@ -320,12 +370,17 @@ vmmc-supply = <&vaux4>; bus-width = <4>; ti,non-removable; + cap-power-off-card; }; &mmc3 { status = "disabled"; }; +&twl_keypad { + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; @@ -342,8 +397,8 @@ }; &charger { - bb_uvolt = <3200000>; - bb_uamp = <150>; + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; }; /* spare */ @@ -377,16 +432,12 @@ regulator-max-microvolt = <3150000>; }; -/* Needed to power the DPI pins */ -&vpll2 { - regulator-always-on; -}; - &dss { pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; status = "okay"; + vdds_dsi-supply = <&vpll2>; port { dpi_out: endpoint { @@ -396,6 +447,20 @@ }; }; +&venc { + status = "okay"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&opa_in>; + ti,channels = <2>; + ti,invert-polarity; + }; + }; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ @@ -449,3 +514,7 @@ }; }; }; + +&mcbsp2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b550c41b46f1..60403273f83e 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -307,7 +307,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; /* due battery cover sensor */ + regulator-always-on; /* due to battery cover sensor */ }; &vaux2 { @@ -365,7 +365,6 @@ regulator-name = "VIO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - }; &vintana1 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 1e49dfe7e212..c41db94ee9c2 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -60,6 +60,11 @@ &twl { compatible = "ti,twl5031"; + + twl_power: power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; }; &twl_gpio { diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 17986536c61f..c2d5c28a1a70 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -69,3 +69,7 @@ }; }; +&gpmc { + ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ +}; diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index c994f0f7e38a..834bc786cd12 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -26,14 +26,10 @@ }; }; -/* - * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and - * SB-T35 baseboard respectively. - * This setting includes both chips in SBC-T3530 board device tree. - */ &gpmc { - ranges = <5 0 0x2c000000 0x01000000>, - <4 0 0x2d000000 0x01000000>; + ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ + <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ }; &mmc1 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 5bdddf29341d..73c7bf4a4a08 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -27,8 +27,9 @@ }; &gpmc { - ranges = <5 0 0x2c000000 0x01000000>, - <4 0 0x2d000000 0x01000000>; + ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ + <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ }; &dss { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index b396c8311b27..e641001ca2a7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,4 +1,5 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -12,6 +13,14 @@ function = "gsbi1"; }; }; + + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; }; gsbi@12440000 { @@ -49,6 +58,9 @@ /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: sdcc@121c0000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 63b2146f563b..cb225dafe97c 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -74,7 +74,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 32 0x4>; + interrupts = <0 16 0x4>; }; intc: interrupt-controller@2000000 { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 1518c5bcca33..a9da7a89fc4b 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -45,7 +45,7 @@ }; &mtu2 { - status = "ok"; + status = "okay"; }; &i2c2 { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 84e05f713c54..b3d8f844b57a 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -67,7 +67,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0 0x80000000>; + ranges = <0 0 0 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index ce085fa444a1..0d50bef01234 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -10,14 +10,20 @@ /dts-v1/; #include "r8a73a4.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "APE6EVM"; compatible = "renesas,ape6evm", "renesas,r8a73a4"; + aliases { + serial0 = &scifa0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = &scifa0; }; memory@40000000 { @@ -30,7 +36,35 @@ reg = <2 0x00000000 0 0x40000000>; }; - ape6evm_fixed_3v3: fixedregulator@0 { + vcc_mmc0: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "MMC0 Vcc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */ + ape6evm_fixed_1v8: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ape6evm_fixed_3v3: regulator@3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -39,11 +73,13 @@ }; lbsc { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0 0x20000000>; ethernet@8000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; + compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x08000000 0x1000>; interrupt-parent = <&irqc1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; @@ -52,7 +88,75 @@ smsc,irq-active-high; smsc,irq-push-pull; vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; + }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 28 GPIO_ACTIVE_LOW>; + label = "GNSS_EN"; + }; + led2 { + gpios = <&pfc 126 GPIO_ACTIVE_LOW>; + label = "NFC_NRST"; + }; + led3 { + gpios = <&pfc 132 GPIO_ACTIVE_LOW>; + label = "GNSS_NRST"; + }; + led4 { + gpios = <&pfc 232 GPIO_ACTIVE_LOW>; + label = "BT_WAKEUP"; + }; + led5 { + gpios = <&pfc 250 GPIO_ACTIVE_LOW>; + label = "STROBE"; + }; + led6 { + gpios = <&pfc 288 GPIO_ACTIVE_LOW>; + label = "BBRESETOUT"; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + zero-key { + gpios = <&pfc 324 GPIO_ACTIVE_LOW>; + linux,code = <KEY_0>; + label = "S16"; + }; + + menu-key { + gpios = <&pfc 325 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "S17"; + }; + + home-key { + gpios = <&pfc 326 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "S18"; + }; + + back-key { + gpios = <&pfc 327 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "S19"; + }; + + volup-key { + gpios = <&pfc 328 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "S20"; + }; + + voldown-key { + gpios = <&pfc 329 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "S21"; }; }; }; @@ -79,3 +183,64 @@ >; voltage-tolerance = <1>; /* 1% */ }; + +&cmt1 { + status = "okay"; +}; + +&pfc { + scifa0_pins: serial0 { + renesas,groups = "scifa0_data"; + renesas,function = "scifa0"; + }; + + mmc0_pins: mmc { + renesas,groups = "mmc0_data8", "mmc0_ctrl"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + sdhi1_pins: sd1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; +}; + +&mmcif0 { + vmmc-supply = <&vcc_mmc0>; + bus-width = <8>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "okay"; +}; + +&scifa0 { + pinctrl-0 = <&scifa0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <&vcc_sdhi0>; + bus-width = <4>; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + status = "okay"; +}; + +&sdhi1 { + vmmc-supply = <&ape6evm_fixed_3v3>; + bus-width = <4>; + broken-cd; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 5ac57babc3b9..38136d9f6d95 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -38,6 +38,16 @@ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + dbsc1: memory-controller@e6790000 { + compatible = "renesas,dbsc-r8a73a4"; + reg = <0 0xe6790000 0 0x10000>; + }; + + dbsc2: memory-controller@e67a0000 { + compatible = "renesas,dbsc-r8a73a4"; + reg = <0 0xe67a0000 0 0x10000>; + }; + dmac: dma-multiplexer { compatible = "renesas,shdma-mux"; #dma-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index d4af4d86c6b0..9bd0cb439f44 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -172,7 +172,7 @@ pinctrl-names = "default"; phy-handle = <&phy0>; - status = "ok"; + status = "okay"; phy0: ethernet-phy@0 { reg = <0>; @@ -193,7 +193,7 @@ }; &cmt1 { - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index a8a674bafa67..8a092605d641 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -25,6 +25,7 @@ device_type = "cpu"; reg = <0x0>; clock-frequency = <800000000>; + power-domains = <&pd_a3sm>; }; }; @@ -36,17 +37,29 @@ <0xc2000000 0x1000>; }; + dbsc3: memory-controller@fe400000 { + compatible = "renesas,dbsc3-r8a7740"; + reg = <0xfe400000 0x400>; + power-domains = <&pd_a4s>; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; }; + ptm { + compatible = "arm,coresight-etm3x"; + power-domains = <&pd_d4>; + }; + cmt1: timer@e6138000 { compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; reg = <0xe6138000 0x170>; interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; clock-names = "fck"; + power-domains = <&pd_c5>; renesas,channels-mask = <0x3f>; @@ -72,6 +85,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; /* irqpin1: IRQ8 - IRQ15 */ @@ -93,6 +107,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; /* irqpin2: IRQ16 - IRQ23 */ @@ -114,6 +129,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; /* irqpin3: IRQ24 - IRQ31 */ @@ -135,6 +151,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; ether: ethernet@e9a00000 { @@ -143,6 +160,7 @@ <0xe9a01800 0x800>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_GETHER>; + power-domains = <&pd_a4s>; phy-mode = "mii"; #address-cells = <1>; #size-cells = <0>; @@ -159,6 +177,7 @@ 0 203 IRQ_TYPE_LEVEL_HIGH 0 204 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_IIC0>; + power-domains = <&pd_a4r>; status = "disabled"; }; @@ -172,6 +191,7 @@ 0 72 IRQ_TYPE_LEVEL_HIGH 0 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_IIC1>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -181,6 +201,7 @@ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -190,6 +211,7 @@ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -199,6 +221,7 @@ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -208,6 +231,7 @@ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -217,6 +241,7 @@ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -226,6 +251,7 @@ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -235,6 +261,7 @@ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -244,6 +271,7 @@ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -253,6 +281,7 @@ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -271,12 +300,14 @@ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + power-domains = <&pd_c5>; }; tpu: pwm@e6600000 { compatible = "renesas,tpu-r8a7740", "renesas,tpu"; reg = <0xe6600000 0x100>; clocks = <&mstp3_clks R8A7740_CLK_TPU0>; + power-domains = <&pd_a3sp>; status = "disabled"; #pwm-cells = <3>; }; @@ -287,6 +318,7 @@ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_MMC>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -297,6 +329,7 @@ 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -309,6 +342,7 @@ 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -321,6 +355,7 @@ 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -332,6 +367,7 @@ reg = <0xfe1f0000 0x400>; interrupts = <0 9 0x4>; clocks = <&mstp3_clks R8A7740_CLK_FSI>; + power-domains = <&pd_a4mp>; status = "disabled"; }; @@ -343,6 +379,7 @@ <0 200 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU0>; clock-names = "fck"; + power-domains = <&pd_a4r>; #renesas,channels = <3>; @@ -357,6 +394,7 @@ <0 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU1>; clock-names = "fck"; + power-domains = <&pd_a4r>; #renesas,channels = <3>; @@ -453,7 +491,7 @@ reg = <0xe6150080 4>; clocks = <&sub_clk>, <&sub_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2 >; clock-output-names = @@ -468,7 +506,7 @@ <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>, <&cpg_clocks R8A7740_CLK_B>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0 R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1 R8A7740_CLK_LCDC0 @@ -489,7 +527,7 @@ <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA R8A7740_CLK_SCIFA7 R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2 @@ -518,7 +556,7 @@ <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1 R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1 R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0 @@ -535,7 +573,7 @@ <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_USBH R8A7740_CLK_SDHI2 R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY >; @@ -543,4 +581,71 @@ "usbhost", "sdhi2", "usbfunc", "usphy"; }; }; + + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a4lc: a4lc@1 { + reg = <1>; + #power-domain-cells = <0>; + }; + + pd_a4mp: a4mp@2 { + reg = <2>; + #power-domain-cells = <0>; + }; + + pd_d4: d4@3 { + reg = <3>; + #power-domain-cells = <0>; + }; + + pd_a4r: a4r@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3rv: a3rv@6 { + reg = <6>; + #power-domain-cells = <0>; + }; + }; + + pd_a4s: a4s@10 { + reg = <10>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + + pd_a3sm: a3sm@12 { + reg = <12>; + #power-domain-cells = <0>; + }; + + pd_a3sg: a3sg@13 { + reg = <13>; + #power-domain-cells = <0>; + }; + }; + + pd_a4su: a4su@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ede9a29e4bc6..5c2219b9f3eb 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -12,6 +12,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7779-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -62,6 +63,14 @@ <0xf0000100 0x100>; }; + timer@f0000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf0000600 0x20>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg_clocks R8A7779_CLK_ZS>; + }; + gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; @@ -200,7 +209,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe40000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; clock-names = "sci_ick"; status = "disabled"; }; @@ -209,7 +218,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe41000 0x100>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; clock-names = "sci_ick"; status = "disabled"; }; @@ -218,7 +227,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe42000 0x100>; interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; clock-names = "sci_ick"; status = "disabled"; }; @@ -227,7 +236,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe43000 0x100>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; clock-names = "sci_ick"; status = "disabled"; }; @@ -236,7 +245,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe44000 0x100>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; clock-names = "sci_ick"; status = "disabled"; }; @@ -245,7 +254,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe45000 0x100>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; clock-names = "sci_ick"; status = "disabled"; }; @@ -464,18 +473,18 @@ <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>, <&cpg_clocks R8A7779_CLK_S>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7779_CLK_HSPI R8A7779_CLK_TMU2 R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 @@ -506,7 +515,7 @@ <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7779_CLK_USB01 R8A7779_CLK_USB2 R8A7779_CLK_DU R8A7779_CLK_VIN2 R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 @@ -527,7 +536,7 @@ clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 4118030f366d..0c3b6783b72a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -355,7 +355,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -366,7 +366,7 @@ }; &cmt0 { - status = "ok"; + status = "okay"; }; &mmcif1 { @@ -397,6 +397,8 @@ spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + spi-cpha; + spi-cpol; m25p,fast-read; partition@0 { @@ -470,17 +472,17 @@ }; &iic0 { - status = "ok"; + status = "okay"; }; &iic1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&iic1_pins>; pinctrl-names = "default"; }; &iic2 { - status = "ok"; + status = "okay"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; @@ -562,7 +564,7 @@ pinctrl-0 = <&vin1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; port { #address-cells = <1>; @@ -579,6 +581,7 @@ pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; + /* Single DAI */ #sound-dai-cells = <0>; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index af7e255f629e..4b38fc920114 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1054,7 +1054,7 @@ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; clocks = <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7790_CLK_MSIOF0>; + clock-indices = <R8A7790_CLK_MSIOF0>; clock-output-names = "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { @@ -1065,7 +1065,7 @@ <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1 R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1 R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC @@ -1087,7 +1087,7 @@ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 @@ -1106,7 +1106,7 @@ <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 @@ -1123,8 +1123,10 @@ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 - R8A7790_CLK_THERMAL R8A7790_CLK_PWM>; + clock-indices = < + R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 + R8A7790_CLK_THERMAL R8A7790_CLK_PWM + >; clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { @@ -1134,7 +1136,7 @@ <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1 R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0 R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0 @@ -1147,16 +1149,17 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, - <&zs_clk>, <&zs_clk>; + clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, + <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < - R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1 - R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1 - R8A7790_CLK_SATA0 + clock-indices = < + R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 + R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER + R8A7790_CLK_SATA1 R8A7790_CLK_SATA0 >; clock-output-names = - "vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0"; + "mlb", "vin3", "vin2", "vin1", "vin0", "ether", + "sata1", "sata0"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1166,7 +1169,7 @@ <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS @@ -1397,8 +1400,13 @@ }; rcar_sound: rcar_sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1432,16 +1440,16 @@ }; rcar_sound,src { - src0: src@0 { }; - src1: src@1 { }; - src2: src@2 { }; - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; + src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; + src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; + src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; + src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; + src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; + src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; + src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; + src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; + src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; }; rcar_sound,ssi { diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 740e38678032..d2ebf11f9881 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -156,7 +156,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -293,7 +293,7 @@ /* composite video input */ &vin0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&vin0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index bf58c79a6554..a3c27807f6c5 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -366,7 +366,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -377,7 +377,7 @@ }; &cmt0 { - status = "ok"; + status = "okay"; }; &sata0 { @@ -444,6 +444,8 @@ spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + spi-cpha; + spi-cpol; m25p,fast-read; partition@0 { @@ -452,13 +454,13 @@ read-only; }; partition@80000 { - label = "bootenv"; - reg = <0x00080000 0x00080000>; + label = "user"; + reg = <0x00080000 0x00580000>; read-only; }; - partition@100000 { - label = "data"; - reg = <0x00100000 0x03f00000>; + partition@600000 { + label = "flash"; + reg = <0x00600000 0x03a00000>; }; }; }; @@ -563,7 +565,7 @@ /* composite video input */ &vin1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&vin1_pins>; pinctrl-names = "default"; @@ -582,6 +584,7 @@ pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; + /* Single DAI */ #sound-dai-cells = <0>; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 77c0beeb8d7c..e35812a0d8d4 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -78,7 +78,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { @@ -186,10 +186,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { @@ -1062,7 +1062,7 @@ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; clocks = <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7791_CLK_MSIOF0>; + clock-indices = <R8A7791_CLK_MSIOF0>; clock-output-names = "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { @@ -1073,7 +1073,7 @@ <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0 @@ -1093,7 +1093,7 @@ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 @@ -1111,7 +1111,7 @@ <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 @@ -1127,8 +1127,10 @@ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 - R8A7791_CLK_THERMAL R8A7791_CLK_PWM>; + clock-indices = < + R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 + R8A7791_CLK_THERMAL R8A7791_CLK_PWM + >; clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { @@ -1138,7 +1140,7 @@ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 @@ -1152,15 +1154,17 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>; + clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, + <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < + R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0 R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0 >; clock-output-names = - "vin2", "vin1", "vin0", "ether", "sata1", "sata0"; + "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether", + "sata1", "sata0"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1171,7 +1175,7 @@ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 @@ -1221,7 +1225,7 @@ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5 >; clock-output-names = "scifa3", "scifa4", "scifa5"; @@ -1381,8 +1385,13 @@ }; rcar_sound: rcar_sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1416,16 +1425,16 @@ }; rcar_sound,src { - src0: src@0 { }; - src1: src@1 { }; - src2: src@2 { }; - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; + src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; + src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; + src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; + src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; + src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; + src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; + src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; + src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; + src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; }; rcar_sound,ssi { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f2cf7576bf3f..0d848e605071 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -40,9 +40,9 @@ }; &cmt0 { - status = "ok"; + status = "okay"; }; &scif2 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 19c9de3f2a5a..8f78da5ef10b 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -47,7 +47,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; cmt0: timer@ffca0000 { @@ -84,10 +84,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -293,6 +293,28 @@ clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "z"; }; + /* Variable factor clocks */ + sd1_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd1"; + }; + sd2_clk: sd3_clk@e615007c { + compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; /* Fixed factor clocks */ pll1_div2_clk: pll1_div2_clk { @@ -455,7 +477,7 @@ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; clocks = <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7794_CLK_MSIOF0>; + clock-indices = <R8A7794_CLK_MSIOF0>; clock-output-names = "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { @@ -465,7 +487,7 @@ <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1 R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 @@ -479,41 +501,51 @@ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 + R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2"; + "scifb1", "msiof1", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&rclk_clk>; + clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>, + <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < - R8A7794_CLK_CMT1 + clock-indices = < + R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0 + R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1 + R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1 >; clock-output-names = - "cmt1"; + "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&mp_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < + R8A7794_CLK_EHCI R8A7794_CLK_HSUSB R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 R8A7794_CLK_SCIF0 >; clock-output-names = + "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", "scif3", "scif2", "scif1", "scif0"; }; @@ -522,18 +554,32 @@ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER >; clock-output-names = "vin1", "vin0", "ether"; }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 + R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1 + R8A7794_CLK_I2C0 + >; + clock-output-names = + "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; + }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 >; clock-output-names = "scifa3", "scifa4", "scifa5"; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts new file mode 100644 index 000000000000..3ac151102c2f --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -0,0 +1,468 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "Rayeager PX2"; + compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */ + vcc_stdby: 5v-stdby-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_stdby"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_emmc: emmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "emmc_vccq"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vsys>; + }; + + vcc_sata: sata-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sata_pwr>; + regulator-name = "usb_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_drv>; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; + phy = <&phy0>; + phy-supply = <&vcc_rmii>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; + vmmc-supply = <&vcc_emmc>; + vqmmc-supply = <&vcc_emmc>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + ak8963: ak8963@0d { + compatible = "asahi-kasei,ak8975"; + reg = <0x0d>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&comp_int>; + }; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + tps: tps@2d { + reg = <0x2d>; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&pwr_hold>; + + vcc1-supply = <&vsys>; + vcc2-supply = <&vsys>; + vcc3-supply = <&vsys>; + vcc4-supply = <&vsys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + vcc7-supply = <&vsys>; + vccio-supply = <&vsys>; + + regulators { + vcc_rtc: regulator@0 { + regulator-name = "vcc_rtc"; + regulator-always-on; + }; + + vcc_io: regulator@1 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_arm: regulator@2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: regulator@3 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc18: regulator@5 { + regulator-name = "vcc18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_11: regulator@6 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_25: regulator@7 { + regulator-name = "vcc_25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vccio_wl: regulator@8 { + regulator-name = "vccio_wl"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc25_hdmi: regulator@9 { + regulator-name = "vcc25_hdmi"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vcca_33: regulator@10 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_rmii: regulator@11 { + regulator-name = "vcc_rmii"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc28_cif: regulator@12 { + regulator-name = "vcc28_cif"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + +#include "tps65910.dtsi" + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + broken-cd; + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; + vmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + ak8963 { + comp_int: comp-int { + rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + emac { + rmii_rst: rmii-rst { + rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + mma8452 { + gsensor_int: gsensor-int { + rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + mmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + usb_host { + host_drv: host-drv { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + hub_rst: hub-rst { + rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>; + }; + + sata_pwr: sata-pwr { + rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + sata_reset: sata-reset { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_drv: otg-drv { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + tps { + pmic_int: pmic-int { + rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + pwr_hold: pwr-hold { + rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_25>; + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>; + status = "okay"; +}; + +&usb_host { + pinctrl-names = "default"; + pinctrl-0 = <&hub_rst>, <&sata_reset>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index a76dd44adb53..d7b8bbc0c25f 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -17,7 +17,34 @@ compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &i2c0 { + clock-frequency = <400000>; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index e1d3eeb8f094..a1c294bf7fed 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -30,7 +30,6 @@ &i2c0 { clock-frequency = <400000>; - status = "okay"; rk808: pmic@1b { compatible = "rockchip,rk808"; @@ -38,7 +37,7 @@ interrupt-parent = <&gpio0>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; @@ -57,6 +56,9 @@ regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_gpu: DCDC_REG2 { @@ -65,12 +67,19 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; }; vcc_io: DCDC_REG4 { @@ -79,6 +88,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vccio_pmu: LDO_REG1 { @@ -87,6 +100,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vcc_tp: LDO_REG2 { @@ -95,6 +112,9 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc_tp"; + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_10: LDO_REG3 { @@ -103,6 +123,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; }; vcc18_lcd: LDO_REG4 { @@ -111,6 +135,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; }; vccio_sd: LDO_REG5 { @@ -119,6 +147,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vdd10_lcd: LDO_REG6 { @@ -127,6 +159,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; }; vcc_18: LDO_REG7 { @@ -135,6 +171,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; }; vcca_codec: LDO_REG8 { @@ -143,18 +183,28 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcca_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vcc_wl: SWITCH_REG1 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_wl"; + regulator-state-mem { + regulator-on-in-suspend; + }; }; vcc_lcd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + }; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 1c08eb0ecdb9..5e895a514a0b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -117,6 +117,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -133,6 +138,10 @@ status = "okay"; }; +&i2c5 { + status = "okay"; +}; + &wdt { status = "okay"; }; @@ -236,3 +245,19 @@ &usb_host1 { status = "okay"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts new file mode 100644 index 000000000000..75d77e38e0d6 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-firefly.dtsi" + +/ { + model = "Firefly-RK3288 Beta"; + compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; +}; + +&ir { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; +}; + +&pinctrl { + act8846 { + pmic_vsel: pmic-vsel { + rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts new file mode 100644 index 000000000000..c07fe92dc69f --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-firefly.dtsi" + +/ { + model = "Firefly-RK3288"; + compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; +}; + +&ir { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; +}; + +&pinctrl { + act8846 { + pmic_vsel: pmic-vsel { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi new file mode 100644 index 000000000000..e6f873abbe0d --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -0,0 +1,490 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "rk3288.dtsi" + +/ { + memory { + reg = <0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + label = "firefly:blue:user"; + linux,default-trigger = "rc-feedback"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led>; + }; + + power { + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + label = "firefly:green:power"; + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_5v: usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_host_5v: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; + + vcc_otg_5v: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc_otg_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio7>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; + system-power-controller; + + regulators { + vcc_ddr: REG1 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "vcc_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "vdd10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_18: REG7 { + regulator-name = "vcca_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcca_33: REG8 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_lan: REG9 { + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_10: REG10 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + pwr_hold: pwr-hold { + rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led: work-led { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbhub_rst: usbhub-rst { + rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdio0 { + broken-cd; + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; + vmmc-supply = <&vcc_18>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&usbhub_rst>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 910dcad2088a..d771f687a13b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -149,8 +149,22 @@ clock-frequency = <24000000>; }; + timer: timer@ff810000 { + compatible = "rockchip,rk3288-timer"; + reg = <0xff810000 0x20>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; + sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -161,6 +175,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -171,6 +186,7 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -181,6 +197,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -518,6 +535,11 @@ }; }; + sram@ff720000 { + compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; + reg = <0xff720000 0x1000>; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -554,6 +576,7 @@ wdt: watchdog@ff800000 { compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; reg = <0xff800000 0x100>; + clocks = <&cru PCLK_WDT>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -573,6 +596,28 @@ status = "disabled"; }; + vopb: vop@ff930000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff930000 0x19c>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + status = "disabled"; + + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopb_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vopb>; + }; + }; + }; + vopb_mmu: iommu@ff930300 { compatible = "rockchip,iommu"; reg = <0xff930300 0x100>; @@ -582,6 +627,28 @@ status = "disabled"; }; + vopl: vop@ff940000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff940000 0x19c>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopl_mmu>; + status = "disabled"; + + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopl_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vopl>; + }; + }; + }; + vopl_mmu: iommu@ff940300 { compatible = "rockchip,iommu"; reg = <0xff940300 0x100>; @@ -591,6 +658,32 @@ status = "disabled"; }; + hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + status = "disabled"; + + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -746,6 +839,24 @@ drive-strength = <12>; }; + sleep { + global_pwroff: global-pwroff { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddrio_pwroff: ddrio-pwroff { + rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddr0_retention: ddr0-retention { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>; + }; + + ddr1_retention: ddr1-retention { + rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index aa31b84a707a..f00cea7aca2f 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -355,6 +355,7 @@ &hsotg { vusb_a-supply = <&ldo3_reg>; vusb_d-supply = <&ldo8_reg>; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index 6387c77a6f7b..a3d4643b202e 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -333,6 +333,7 @@ &hsotg { vusb_a-supply = <&ldo3_reg>; vusb_d-supply = <&ldo8_reg>; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index cb8521899ec8..da7d210df670 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -181,6 +181,7 @@ }; &hsotg { + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index be2ccc53abb5..83bee7a3a617 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -45,7 +45,7 @@ */ i2c0: i2c@f0014000 { wm8904: wm8904@1a { - compatible = "wm8904"; + compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 2a31d66164ac..d986b41b9654 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -62,6 +62,7 @@ gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; + gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; @@ -272,7 +273,7 @@ }; nand0: nand@80000000 { - compatible = "atmel,at91rm9200-nand"; + compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1121,6 +1122,18 @@ clocks = <&pioC_clk>; }; + pioD: gpio@fc068000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc068000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioD_clk>; + status = "disabled"; + }; + pioE: gpio@fc06d000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc06d000 0x100>; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 939be1299ca6..863dc4c7d7f6 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -179,7 +179,7 @@ }; &cmt1 { - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index d8def5a529da..37c8a761aeab 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -42,6 +42,22 @@ <0xf0000100 0x100>; }; + sbsc2: memory-controller@fb400000 { + compatible = "renesas,sbsc-sh73a0"; + reg = <0xfb400000 0x400>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sec", "temp"; + }; + + sbsc1: memory-controller@fe400000 { + compatible = "renesas,sbsc-sh73a0"; + reg = <0xfe400000 0x400>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sec", "temp"; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, @@ -317,7 +333,7 @@ sh_fsi2: sound@ec230000 { #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; + compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; status = "disabled"; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index 261d5e2c48d2..af487145cd89 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -7,9 +7,8 @@ * published by the Free Software Foundation. */ /dts-v1/; -#include "stih407-clock.dtsi" -#include "stih407-family.dtsi" #include "stihxxx-b2120.dtsi" +#include "stih407.dtsi" / { model = "STiH407 B2120"; compatible = "st,stih407-b2120", "st,stih407"; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index d4a8f843cdc8..c06a54681912 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -283,5 +283,58 @@ <&picophyreset STIH407_PICOPHY0_RESET>; reset-names = "global", "port"; }; + + miphy28lp_phy: miphy28lp@9b22000 { + compatible = "st,miphy28lp-phy"; + st,syscfg = <&syscfg_core>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@9b22000 { + reg = <0x9b22000 0xff>, + <0x9b09000 0xff>, + <0x9b04000 0xff>; + reg-names = "sata-up", + "pcie-up", + "pipew"; + + st,syscfg = <0x114 0x818 0xe0 0xec>; + #phy-cells = <1>; + + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY0_SOFTRESET>; + }; + + phy_port1: port@9b2a000 { + reg = <0x9b2a000 0xff>, + <0x9b19000 0xff>, + <0x9b14000 0xff>; + reg-names = "sata-up", + "pcie-up", + "pipew"; + + st,syscfg = <0x118 0x81c 0xe4 0xf0>; + + #phy-cells = <1>; + + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY1_SOFTRESET>; + }; + + phy_port2: port@8f95000 { + reg = <0x8f95000 0xff>, + <0x8f90000 0xff>; + reg-names = "pipew", + "usb3-up"; + + st,syscfg = <0x11c 0x820>; + + #phy-cells = <1>; + + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY2_SOFTRESET>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi new file mode 100644 index 000000000000..3efa3b2ebe90 --- /dev/null +++ b/arch/arm/boot/dts/stih407.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2015 STMicroelectronics Limited. + * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-clock.dtsi" +#include "stih407-family.dtsi" +/ { + soc { + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + }; + + sti-display-subsystem { + compatible = "st,sti-display-subsystem"; + #address-cells = <1>; + #size-cells = <1>; + + assigned-clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>; + + assigned-clock-parents = <0>, + <0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + + assigned-clock-rates = <297000000>, <297000000>; + + ranges; + + sti-compositor@9d11000 { + compatible = "st,stih407-compositor"; + reg = <0x9d11000 0x1000>; + + clock-names = "compo_main", + "compo_aux", + "pix_main", + "pix_aux", + "pix_gdp1", + "pix_gdp2", + "pix_gdp3", + "pix_gdp4", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH407_COMPO_SOFTRESET>, + <&softreset STIH407_COMPO_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + }; + + sti-tvout@8d08000 { + compatible = "st,stih407-tvout"; + reg = <0x8d08000 0x1000>; + reg-names = "tvout-reg"; + reset-names = "tvout"; + resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; + #address-cells = <1>; + #size-cells = <1>; + assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>; + + assigned-clock-parents = <&clk_s_d2_quadfs 0>, + <&clk_tmdsout_hdmi>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d0_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + ranges; + + sti-hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + + }; + + sti-hda@8d02000 { + compatible = "st,stih407-hda"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 37995f4739d2..208b5e89036a 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -80,5 +80,143 @@ phys = <&usb2_picophy2>; phy-names = "usb"; }; + + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + }; + + sti-display-subsystem { + compatible = "st,sti-display-subsystem"; + #address-cells = <1>; + #size-cells = <1>; + + assigned-clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>; + + assigned-clock-parents = <0>, + <0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + + assigned-clock-rates = <297000000>, <297000000>; + + ranges; + + sti-compositor@9d11000 { + compatible = "st,stih407-compositor"; + reg = <0x9d11000 0x1000>; + + clock-names = "compo_main", + "compo_aux", + "pix_main", + "pix_aux", + "pix_gdp1", + "pix_gdp2", + "pix_gdp3", + "pix_gdp4", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH407_COMPO_SOFTRESET>, + <&softreset STIH407_COMPO_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + }; + + sti-tvout@8d08000 { + compatible = "st,stih407-tvout"; + reg = <0x8d08000 0x1000>; + reg-names = "tvout-reg"; + reset-names = "tvout"; + resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; + #address-cells = <1>; + #size-cells = <1>; + assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>; + + assigned-clock-parents = <&clk_s_d2_quadfs 0>, + <&clk_tmdsout_hdmi>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d0_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + ranges; + + sti-hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + + }; + + sti-hda@8d02000 { + compatible = "st,stih407-hda"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts new file mode 100644 index 000000000000..926235c08e4d --- /dev/null +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 STMicroelectronics (R&D) Limited. + * Author: Maxime Coquelin <maxime.coquelin@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih418.dtsi" +/ { + model = "STiH418 B2199"; + compatible = "st,stih418-b2199", "st,stih418"; + + chosen { + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0xc0000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi new file mode 100644 index 000000000000..0ab23daa2829 --- /dev/null +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -0,0 +1,348 @@ +/* + * Copyright (C) 2015 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <dt-bindings/clock/stih418-clks.h> +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "st,stih418-clk", "simple-bus"; + + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * A9 PLL. + */ + clockgen-a9@92b0000 { + compatible = "st,clkgen-c32"; + reg = <0x92b0000 0xffff>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks. + */ + clk_m_a9: clk-m-a9@92b0000 { + #clock-cells = <0>; + compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0x92b0000 0x10000>; + + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_s_c0_flexgen 13>, + <&clk_m_a9_ext2f_div2>; + }; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + + clockgen-a@090ff000 { + compatible = "st,clkgen-c32"; + reg = <0x90ff000 0x1000>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll-ofd-0"; + }; + + clk_s_a0_flexgen: clk-s-a0-flexgen { + compatible = "st,flexgen"; + + #clock-cells = <1>; + + clocks = <&clk_s_a0_pll 0>, + <&clk_sysin>; + + clock-output-names = "clk-ic-lmi0", + "clk-ic-lmi1"; + }; + }; + + clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-C", "st,quadfs"; + reg = <0x9103000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-fs0-ch0", + "clk-s-c0-fs0-ch1", + "clk-s-c0-fs0-ch2", + "clk-s-c0-fs0-ch3"; + }; + + clk_s_c0: clockgen-c@09103000 { + compatible = "st,clkgen-c32"; + reg = <0x9103000 0x1000>; + + clk_s_c0_pll0: clk-s-c0-pll0 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll0-odf-0"; + }; + + clk_s_c0_pll1: clk-s-c0-pll1 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll1-odf-0"; + }; + + clk_s_c0_flexgen: clk-s-c0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_c0_pll0 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_quadfs 0>, + <&clk_s_c0_quadfs 1>, + <&clk_s_c0_quadfs 2>, + <&clk_s_c0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-icn-gpu", + "clk-fdma", + "clk-nand", + "clk-hva", + "clk-proc-stfe", + "clk-tp", + "clk-rx-icn-dmu", + "clk-rx-icn-hva", + "clk-icn-cpu", + "clk-tx-icn-dmu", + "clk-mmc-0", + "clk-mmc-1", + "clk-jpegdec", + "clk-icn-reg", + "clk-proc-bdisp-0", + "clk-proc-bdisp-1", + "clk-pp-dmu", + "clk-vid-dmu", + "clk-dss-lpc", + "clk-st231-aud-0", + "clk-st231-gp-1", + "clk-st231-dmu", + "clk-icn-lmi", + "clk-tx-icn-1", + "clk-icn-sbc", + "clk-stfe-frc2", + "clk-eth-phyref", + "clk-eth-ref-phyclk", + "clk-flash-promip", + "clk-main-disp", + "clk-aux-disp", + "clk-compo-dvp", + "clk-tx-icn-hades", + "clk-rx-icn-hades", + "clk-icn-reg-16", + "clk-pp-hevc", + "clk-clust-hevc", + "clk-hwpe-hevc", + "clk-fc-hevc", + "clk-proc-mixer", + "clk-proc-sc", + "clk-avsp-hevc"; + }; + }; + + clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9104000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d0-fs0-ch0", + "clk-s-d0-fs0-ch1", + "clk-s-d0-fs0-ch2", + "clk-s-d0-fs0-ch3"; + }; + + clockgen-d0@09104000 { + compatible = "st,clkgen-c32"; + reg = <0x9104000 0x1000>; + + clk_s_d0_flexgen: clk-s-d0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d0_quadfs 0>, + <&clk_s_d0_quadfs 1>, + <&clk_s_d0_quadfs 2>, + <&clk_s_d0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-pcm-0", + "clk-pcm-1", + "clk-pcm-2", + "clk-spdiff", + "clk-pcmr10-master", + "clk-usb2-phy"; + }; + }; + + clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9106000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d2-fs0-ch0", + "clk-s-d2-fs0-ch1", + "clk-s-d2-fs0-ch2", + "clk-s-d2-fs0-ch3"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + clockgen-d2@x9106000 { + compatible = "st,clkgen-c32"; + reg = <0x9106000 0x1000>; + + clk_s_d2_flexgen: clk-s-d2-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_d2_quadfs 2>, + <&clk_s_d2_quadfs 3>, + <&clk_sysin>, + <&clk_sysin>, + <&clk_tmdsout_hdmi>; + + clock-output-names = "clk-pix-main-disp", + "", + "", + "", + "", + "clk-tmds-hdmi-div2", + "clk-pix-aux-disp", + "clk-denc", + "clk-pix-hddac", + "clk-hddac", + "clk-sddac", + "clk-pix-dvo", + "clk-dvo", + "clk-pix-hdmi", + "clk-tmds-hdmi", + "clk-ref-hdmiphy", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "clk-vp9"; + }; + }; + + clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9107000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d3-fs0-ch0", + "clk-s-d3-fs0-ch1", + "clk-s-d3-fs0-ch2", + "clk-s-d3-fs0-ch3"; + }; + + clockgen-d3@9107000 { + compatible = "st,clkgen-c32"; + reg = <0x9107000 0x1000>; + + clk_s_d3_flexgen: clk-s-d3-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d3_quadfs 0>, + <&clk_s_d3_quadfs 1>, + <&clk_s_d3_quadfs 2>, + <&clk_s_d3_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-stfe-frc1", + "clk-tsout-0", + "clk-tsout-1", + "clk-mchi", + "clk-vsens-compo", + "clk-frc1-remote", + "clk-lpc-0", + "clk-lpc-1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi new file mode 100644 index 000000000000..354d90f521b6 --- /dev/null +++ b/arch/arm/boot/dts/stih418.dtsi @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Peter Griffin <peter.griffin@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih418-clock.dtsi" +#include "stih407-family.dtsi" +#include "stih410-pinctrl.dtsi" +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + soc { + usb2_picophy1: phy2 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xf8 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + }; + + usb2_picophy2: phy3 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xfc 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY1_RESET>; + reset-names = "global", "port"; + }; + + ohci0: usb@9a03c00 { + compatible = "st,st-ohci-300x"; + reg = <0x9a03c00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ehci0: usb@9a03e00 { + compatible = "st,st-ehci-300x"; + reg = <0x9a03e00 0x100>; + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ohci1: usb@9a83c00 { + compatible = "st,st-ohci-300x"; + reg = <0x9a83c00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy2>; + phy-names = "usb"; + }; + + ehci1: usb@9a83e00 { + compatible = "st,st-ehci-300x"; + reg = <0x9a83e00 0x100>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy2>; + phy-names = "usb"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 0074bd49797c..c1d859092be7 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -48,12 +48,23 @@ }; /* SSC11 to HDMI */ - i2c@9541000 { + hdmiddc: i2c@9541000 { status = "okay"; /* HDMI V1.3a supports Standard mode only */ clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; + + miphy28lp_phy: miphy28lp@9b22000 { + + phy_port0: port@9b22000 { + st,osc-rdy; + }; + + phy_port1: port@9b2a000 { + st,osc-force-ext; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 3bcfd81837f0..b67e5be618cf 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele A1000"; @@ -77,7 +80,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -112,15 +115,15 @@ emac_power_pin_a1000: emac_power_pin@0 { allwinner,pins = "PH15"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_a1000: led_pins@0 { allwinner,pins = "PH10", "PH20"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -159,12 +162,12 @@ red { label = "a1000:red:usr"; - gpios = <&pio 7 10 0>; + gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; }; blue { label = "a1000:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -176,7 +179,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 15 0>; + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; reg_usb1_vbus: usb1-vbus { diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index f3f2974658e4..490b77c9bb36 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -46,8 +46,10 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> / { model = "BA10 tvbox"; @@ -74,7 +76,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -140,7 +142,7 @@ }; reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts new file mode 100644 index 000000000000..58214f249598 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Chuwi V7 CW0825"; + compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 6a310da53f18..4260c2b47607 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -47,8 +47,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard"; @@ -75,7 +78,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -111,8 +114,8 @@ led_pins_cubieboard: led_pins@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -134,12 +137,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -148,6 +147,12 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; + + spi0: spi@01c05000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; + }; }; leds { @@ -157,12 +162,12 @@ blue { label = "cubieboard:blue:usr"; - gpios = <&pio 7 21 0>; /* LED1 */ + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ }; green { label = "cubieboard:green:usr"; - gpios = <&pio 7 20 0>; /* LED2 */ + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ linux,default-trigger = "heartbeat"; }; }; @@ -179,3 +184,34 @@ status = "okay"; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index efc116287e0f..d3f73ea25567 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Miniand Hackberry"; @@ -77,7 +80,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -111,15 +114,15 @@ hackberry_hogs: hogs@0 { allwinner,pins = "PH19"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -157,7 +160,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 19 0>; + gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; reg_usb1_vbus: usb1-vbus { @@ -166,7 +169,7 @@ reg_usb2_vbus: usb2-vbus { pinctrl-0 = <&usb2_vbus_pin_hackberry>; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts new file mode 100644 index 000000000000..c88382aacc36 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -0,0 +1,105 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Hyundai A7HD"; + compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb2_vbus_pin_a { + allwinner,pins = "PH6"; +}; + +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 3e25ee4d3248..482914333bba 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -48,8 +48,10 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> / { model = "INet-97F Rev 02"; @@ -65,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts new file mode 100644 index 000000000000..9ee86a700c2b --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -0,0 +1,183 @@ +/* + * Copyright 2015 Aleksei Mamlin + * Aleksei Mamlin <mamlinav@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "HAOYU Electronics Marsboard A10"; + compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_marsboard>; + + red1 { + label = "marsboard:red1:usr"; + gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; + }; + + red2 { + label = "marsboard:red2:usr"; + gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; + }; + + red3 { + label = "marsboard:red3:usr"; + gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; + }; + + red4 { + label = "marsboard:red4:usr"; + gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_marsboard: led_pins@0 { + allwinner,pins = "PB5", "PB6", "PB7", "PB8"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 8b3f97470249..eb5fd6904a69 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "PineRiver Mini X-Plus"; @@ -61,7 +64,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -91,7 +94,7 @@ pinctrl@01c20800 { ir0_pins_a: ir0@0 { /* The ir receiver is not always populated */ - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts new file mode 100644 index 000000000000..e9a6886f0d51 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -0,0 +1,109 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MK802"; + compatible = "allwinner,mk802", "allwinner,sun4i-a10"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + usb2_vbus_pin_mk802: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_mk802>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts new file mode 100644 index 000000000000..802eda494d1c --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -0,0 +1,113 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MK802ii"; + compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 88cf1a531155..ab7891c43231 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10-OLinuXino-LIME"; @@ -74,7 +77,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -110,15 +113,15 @@ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_olinuxinolime: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -151,14 +154,14 @@ green { label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index ce5994597407..9d1e5482cf82 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -47,8 +47,12 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LinkSprite pcDuino"; @@ -62,6 +66,22 @@ status = "okay"; }; + pinctrl@01c20800 { + led_pins_pcduino: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + key_pins_pcduino: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + mdio@01c0b080 { status = "okay"; @@ -75,7 +95,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -124,6 +144,48 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino>; + + tx { + label = "pcduino:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "Key Back"; + linux,code = <KEY_BACK>; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "Key Home"; + linux,code = <KEY_HOME>; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Key Menu"; + linux,code = <KEY_MENU>; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + reg_usb1_vbus: usb1-vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index d5c4669224b1..8ca3c1a2063d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -10,7 +10,12 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; @@ -39,15 +44,78 @@ <&ahb_gates 44>, <&ahb_gates 46>; status = "disabled"; }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_fe0-de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, + <&ahb_gates 46>; + status = "disabled"; + }; + + framebuffer@3 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&ahb_gates 46>; + status = "disabled"; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1056000 1500000 + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <4>; + }; + }; + + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <850000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -359,7 +427,8 @@ interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -372,7 +441,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -387,7 +457,7 @@ status = "disabled"; }; - mdio@01c0b080 { + mdio: mdio@01c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -469,7 +539,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -510,7 +581,8 @@ interrupts = <50>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 31>, <&dma 1 30>; + dmas = <&dma SUN4I_DMA_DEDICATED 31>, + <&dma SUN4I_DMA_DEDICATED 30>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -538,57 +610,57 @@ pwm0_pins_a: pwm0@0 { allwinner,pins = "PB2"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; pwm1_pins_a: pwm1@0 { allwinner,pins = "PI3"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_b: uart0@1 { allwinner,pins = "PF2", "PF4"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_a: uart1@0 { allwinner,pins = "PA10", "PA11"; allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB18", "PB19"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB20", "PB21"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; emac_pins_a: emac0@0 { @@ -598,36 +670,78 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { allwinner,pins = "PH1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; ir0_pins_a: ir0@0 { allwinner,pins = "PB3","PB4"; allwinner,function = "ir0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ir1_pins_a: ir1@0 { allwinner,pins = "PB22","PB23"; allwinner,function = "ir1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_pins_a: spi0@0 { + allwinner,pins = "PI10", "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_pins_a: spi1@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_pins_a: spi2@0 { + allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_pins_b: spi2@1 { + allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -675,6 +789,13 @@ status = "disabled"; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -684,6 +805,7 @@ compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; + #thermal-sensor-cells = <0>; }; uart0: serial@01c28000 { @@ -795,5 +917,21 @@ #address-cells = <1>; #size-cells = <0>; }; + + ps20: ps2@01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <62>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; + + ps21: ps2@01c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = <63>; + clocks = <&apb1_gates 7>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts new file mode 100644 index 000000000000..b21af87d9eae --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MK802-A10s"; + compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_mk802>; + + red { + label = "mk802:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + led_pins_mk802: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_mk802: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_mk802: usb1_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_mk802>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index bfa742817690..2bbc93b935ca 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun5i-a10s.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10s-Olinuxino Micro"; @@ -82,7 +86,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ cd-inverted; status = "okay"; }; @@ -92,7 +96,7 @@ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 13 0>; /* PG13 */ + cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ cd-inverted; status = "okay"; }; @@ -114,29 +118,69 @@ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { allwinner,pins = "PG13"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PE3"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { allwinner,pins = "PB10"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; }; @@ -191,14 +235,14 @@ green { label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 0>; + gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; - gpio = <&pio 1 10 0>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 1fa2916eafc2..7deddfc9df8b 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun5i-a10s.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "R7 A10s hdmi tv-stick"; @@ -59,7 +62,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ cd-inverted; status = "okay"; }; @@ -90,22 +93,22 @@ mmc0_cd_pin_r7: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_r7: led_pins@0 { allwinner,pins = "PB2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_r7: usb1_vbus_pin@0 { allwinner,pins = "PG13"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -123,14 +126,14 @@ green { label = "r7-tv-dongle:green:usr"; - gpios = <&pio 1 2 0>; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_r7>; - gpio = <&pio 6 13 0>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2e7d8263799d..905f84d141f0 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -11,7 +11,10 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; @@ -32,6 +35,14 @@ <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + status = "disabled"; + }; }; cpus { @@ -316,7 +327,8 @@ interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -329,7 +341,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -344,7 +357,7 @@ status = "disabled"; }; - mdio@01c0b080 { + mdio: mdio@01c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -417,7 +430,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -445,22 +459,22 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PB19", "PB20"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart2_pins_a: uart2@0 { allwinner,pins = "PC18", "PC19"; allwinner,function = "uart2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart3_pins_a: uart3@0 { allwinner,pins = "PG9", "PG10"; allwinner,function = "uart3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; emac_pins_a: emac0@0 { @@ -470,43 +484,43 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB15", "PB16"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB17", "PB18"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc1_pins_a: mmc1@0 { allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; allwinner,function = "mmc1"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -522,6 +536,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -531,6 +552,7 @@ compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; + #thermal-sensor-cells = <0>; }; uart0: serial@01c28000 { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index c7be3abd9fcc..03aa04555630 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "HSG H702"; @@ -63,17 +66,13 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; usbphy: phy@01c13400 { - /* - * There doesn't seem to be a GPIO for controlling - * usb1 vbus, despite the fex file saying otherwise. - */ - usb1_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_ldo3>; status = "okay"; }; @@ -89,8 +88,8 @@ mmc0_cd_pin_h702: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; @@ -106,11 +105,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -132,3 +128,40 @@ }; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 3decefb3c37a..03deb84268ce 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -47,8 +47,11 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino Micro"; @@ -64,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -86,22 +89,22 @@ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxinom: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -137,14 +140,14 @@ power { label = "a13-olinuxino-micro:green:power"; - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index b421f7fa197b..6b24876ed462 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino"; @@ -65,7 +69,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -87,22 +91,62 @@ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; }; @@ -116,6 +160,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { @@ -137,14 +190,14 @@ pinctrl-0 = <&led_pins_olinuxino>; power { - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c556688f8b8b..4910393d1b09 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -11,18 +11,85 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1104000 1500000 + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1200000 + 576000 1200000 + 432000 1200000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <6>; + }; + }; + + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <850000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -299,7 +366,8 @@ interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -312,7 +380,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -375,7 +444,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -403,43 +473,43 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_b: uart1@1 { allwinner,pins = "PG3", "PG4"; allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB15", "PB16"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB17", "PB18"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -455,6 +525,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -464,6 +541,7 @@ compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; + #thermal-sensor-cells = <0>; }; uart1: serial@01c28400 { diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index c74a63a39531..be9f5ee6b59e 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Allwinner A31 APP4 EVB1 Evaluation Board"; @@ -64,8 +67,8 @@ usb1_vbus_pin_a: usb1_vbus_pin@0 { allwinner,pins = "PH27"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -87,7 +90,7 @@ reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 27 0>; + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index c36b4dc89c13..84630e56acd7 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "WITS A31 Colombus Evaluation Board"; @@ -65,7 +68,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; status = "okay"; }; @@ -81,21 +84,21 @@ pio: pinctrl@01c20800 { mmc0_pins_a: mmc0@0 { - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc0_cd_pin_colombus: mmc0_cd_pin@0 { allwinner,pins = "PA8"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; usb2_vbus_pin_colombus: usb2_vbus_pin@0 { allwinner,pins = "PH24"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -127,7 +130,7 @@ reg_usb2_vbus: usb2-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 0>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 6e924d9d2912..8b61b1b342e0 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A31 Hummingbird"; @@ -58,98 +61,96 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; +}; + +&ehci0 { + status = "okay"; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 8 0>; /* PA8 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c1a000 { - status = "okay"; - }; - - ohci0: usb@01c1a400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - mmc0_pins_a: mmc0@0 { - /* external pull-ups missing for some pins */ - allwinner,pull = <1>; - }; - - mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; - }; - - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - /* pull-ups and devices require AXP221 DLDO3 */ - status = "failed"; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - gmac: ethernet@01c30000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + /* pull-ups and devices require AXP221 DLDO3 */ + status = "failed"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 24 0>; /* PH24 */ - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + /* external pull-ups missing for some pins */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_usb1_vbus { + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + /* different pin from sunxi-common-regulators */ + allwinner,pins = "PH24"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 3ab544f3af4a..139a21e6b695 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele M9 / A1000G Quad top set box"; @@ -63,7 +66,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 22 0>; /* PH22 */ + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; @@ -85,22 +88,22 @@ led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { allwinner,pins = "PC27"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -121,6 +124,12 @@ reg = <1>; }; }; + + ir@01f02000 { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; + }; }; leds { @@ -130,14 +139,14 @@ blue { label = "m9:blue:usr"; - gpios = <&pio 7 13 0>; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; - gpio = <&pio 2 27 0>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 1e7e7bcf8307..47e557656993 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -47,7 +47,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -67,6 +71,24 @@ clocks = <&pll6 0>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; }; cpus { @@ -105,10 +127,10 @@ pmu { compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; - interrupts = <0 120 4>, - <0 121 4>, - <0 122 4>, - <0 123 4>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; }; clocks { @@ -355,7 +377,7 @@ dma: dma-controller@01c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; @@ -372,7 +394,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 8>; reset-names = "ahb"; - interrupts = <0 60 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -383,7 +405,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 9>; reset-names = "ahb"; - interrupts = <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -394,7 +416,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 10>; reset-names = "ahb"; - interrupts = <0 62 4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -405,7 +427,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 11>; reset-names = "ahb"; - interrupts = <0 63 4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -436,7 +458,7 @@ ehci0: usb@01c1a000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; - interrupts = <0 72 4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 26>; resets = <&ahb1_rst 26>; phys = <&usbphy 1>; @@ -447,7 +469,7 @@ ohci0: usb@01c1a400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; - interrupts = <0 73 4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 29>, <&usb_clk 16>; resets = <&ahb1_rst 29>; phys = <&usbphy 1>; @@ -458,7 +480,7 @@ ehci1: usb@01c1b000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; - interrupts = <0 74 4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 27>; resets = <&ahb1_rst 27>; phys = <&usbphy 2>; @@ -469,7 +491,7 @@ ohci1: usb@01c1b400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; - interrupts = <0 75 4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 30>, <&usb_clk 17>; resets = <&ahb1_rst 30>; phys = <&usbphy 2>; @@ -480,7 +502,7 @@ ohci2: usb@01c1c400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; - interrupts = <0 77 4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 31>, <&usb_clk 18>; resets = <&ahb1_rst 31>; status = "disabled"; @@ -489,10 +511,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -503,36 +525,36 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PH14", "PH15"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PH16", "PH17"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PH18", "PH19"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_mii_a: gmac_mii@0 { @@ -542,8 +564,8 @@ "PA20", "PA21", "PA22", "PA23", "PA24", "PA26", "PA27"; allwinner,function = "gmac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_gmii_a: gmac_gmii@0 { @@ -559,8 +581,8 @@ * data lines in GMII mode run at 125MHz and * might need a higher signal drive strength */ - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_rgmii_a: gmac_rgmii@0 { @@ -573,8 +595,8 @@ * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <3>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -599,11 +621,11 @@ timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>, - <0 20 4>, - <0 21 4>, - <0 22 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -612,10 +634,17 @@ reg = <0x01c20ca0 0x20>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun6i-a31-ts"; + reg = <0x01c25000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -628,7 +657,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -641,7 +670,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -654,7 +683,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -667,7 +696,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -680,7 +709,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; @@ -693,7 +722,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 0>; resets = <&apb2_rst 0>; status = "disabled"; @@ -704,7 +733,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 1>; resets = <&apb2_rst 1>; status = "disabled"; @@ -715,7 +744,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 2>; resets = <&apb2_rst 2>; status = "disabled"; @@ -726,7 +755,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 3>; resets = <&apb2_rst 3>; status = "disabled"; @@ -737,7 +766,7 @@ gmac: ethernet@01c30000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c30000 0x1054>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; @@ -754,10 +783,10 @@ timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; - interrupts = <0 51 4>, - <0 52 4>, - <0 53 4>, - <0 54 4>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 19>; resets = <&ahb1_rst 19>; }; @@ -765,7 +794,7 @@ spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; dmas = <&dma 23>, <&dma 23>; @@ -777,7 +806,7 @@ spi1: spi@01c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; dmas = <&dma 24>, <&dma 24>; @@ -789,7 +818,7 @@ spi2: spi@01c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; - interrupts = <0 67 4>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; dmas = <&dma 25>, <&dma 25>; @@ -801,7 +830,7 @@ spi3: spi@01c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; - interrupts = <0 68 4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; dmas = <&dma 26>, <&dma 26>; @@ -818,13 +847,14 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; - interrupts = <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; nmi_intc: interrupt-controller@01f00c0c { @@ -832,7 +862,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x01f00c0c 0x38>; - interrupts = <0 32 4>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; prcm@01f01400 { @@ -872,6 +902,13 @@ "apb0_i2c"; }; + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; + apb0_rst: apb0_rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; @@ -883,11 +920,21 @@ reg = <0x01f01c00 0x300>; }; + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_rst 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + r_pio: pinctrl@01f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <0 45 4>, - <0 46 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>; resets = <&apb0_rst 0>; gpio-controller; @@ -895,6 +942,13 @@ #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL4"; + allwinner,function = "s_ir"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts new file mode 100644 index 000000000000..bc3734f67cf0 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -0,0 +1,104 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "CSQ CS908 top set box"; + compatible = "csq,cs908", "allwinner,sun6i-a31s"; +}; + +&usbphy { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + usb1_vbus_pin_csq908: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi new file mode 100644 index 000000000000..eaf5ec8fd459 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The A31s is the same die as the A31 in a different package, this is + * reflected by it having different pinctrl compatible everything else is + * identical. + */ + +#include "sun6i-a31.dtsi" + +&pio { + compatible = "allwinner,sun6i-a31s-pinctrl"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index bd7b15add697..5dd139e7792e 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LeMaker Banana Pi"; @@ -73,7 +77,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 0>; /* PH10 */ + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ cd-inverted; status = "okay"; }; @@ -108,22 +112,22 @@ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; gmac_power_pin_bananapi: gmac_power_pin@0 { allwinner,pins = "PH23"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_bananapi: led_pins@0 { allwinner,pins = "PH24"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -160,7 +164,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -194,7 +198,7 @@ green { label = "bananapi:green:usr"; - gpios = <&pio 7 24 0>; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; }; @@ -215,6 +219,6 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <100000>; enable-active-high; - gpio = <&pio 7 23 0>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts new file mode 100644 index 000000000000..fb89fe7ed21b --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "LeMaker Banana Pro"; + compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapro>; + + blue { + label = "bananapro:blue:usr"; + gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "bananapro:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapro>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_bananapro>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gmac_power_pin_bananapro: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bananapro: led_pins@0 { + allwinner,pins = "PH24", "PG2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH0"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + vmmc3_pin_bananapro: vmmc3_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 53680983461a..c4ab6edb6f15 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -3,17 +3,57 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard2"; @@ -25,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -61,8 +101,8 @@ led_pins_cubieboard2: led_pins@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -84,13 +124,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; - - interrupt-controller; - #interrupt-cells = <1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -120,12 +156,12 @@ blue { label = "cubieboard2:blue:usr"; - gpios = <&pio 7 21 0>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; green { label = "cubieboard2:green:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -141,3 +177,34 @@ status = "okay"; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index a281d259b9b8..8f74a649576d 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -3,17 +3,57 @@ * * Oliver Schinagl <oliver@schinagl.nl> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubietruck"; @@ -25,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -70,35 +110,35 @@ pinctrl@01c20800 { mmc3_pins_a: mmc3@0 { /* AP6210 requires pull-up */ - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; vmmc3_pin_cubietruck: vmmc3_pin@0 { allwinner,pins = "PH9"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_cubietruck: led_pins@0 { allwinner,pins = "PH7", "PH11", "PH20", "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { allwinner,pins = "PH17"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -126,13 +166,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; - - interrupt-controller; - #interrupt-cells = <1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -168,34 +204,34 @@ blue { label = "cubietruck:blue:usr"; - gpios = <&pio 7 21 0>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; orange { label = "cubietruck:orange:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; white { label = "cubietruck:white:usr"; - gpios = <&pio 7 11 0>; + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; }; green { label = "cubietruck:green:usr"; - gpios = <&pio 7 7 0>; + gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_cubietruck>; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; reg_usb0_vbus: usb0-vbus { pinctrl-0 = <&usb0_vbus_pin_a>; - gpio = <&pio 7 17 0>; + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -215,6 +251,37 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 9 0>; + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 0bcefcbbb756..86a944ce19f8 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -12,8 +12,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A20 Hummingbird"; @@ -33,7 +37,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -78,29 +82,29 @@ ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { allwinner,pins = "PH15"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { allwinner,pins = "PH9"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { allwinner,pins = "PH16"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -155,7 +159,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; }; @@ -192,7 +196,7 @@ phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; /* phy reset config */ - snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ snps,reset-active-low; /* wait 1s after reset, otherwise fail to read phy id */ snps,reset-delays-us = <0 10000 1000000>; @@ -206,13 +210,13 @@ reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; - gpio = <&pio 7 15 0>; /* PH15 */ + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; - gpio = <&pio 7 2 0>; /* PH2 */ + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -228,7 +232,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; enable-active-high; - gpio = <&pio 7 9 0>; /* PH9 */ + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ }; reg_gmac_vdd: gmac_vdd { @@ -239,6 +243,6 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; enable-active-high; - gpio = <&pio 7 16 0>; /* PH16 */ + gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */ }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index f38bb1a6656c..06148b4d000f 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -46,8 +46,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "I12 / Q5 / QT840A A20 tvbox"; @@ -59,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -98,35 +102,35 @@ pinctrl@01c20800 { mmc3_pins_a: mmc3@0 { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; vmmc3_pin_i12_tvbox: vmmc3_pin@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { allwinner,pins = "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_i12_tvbox: led_pins@0 { allwinner,pins = "PH9", "PH20"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -151,7 +155,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -179,12 +183,12 @@ red { label = "i12_tvbox:red:usr"; - gpios = <&pio 7 9 1>; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; }; blue { label = "i12_tvbox:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -204,7 +208,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 2 0>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; }; reg_vmmc3_io: vmmc3-io { @@ -217,7 +221,7 @@ /* This controls VCC-PI, must be always on! */ regulator-always-on; enable-active-high; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; }; reg_gmac_3v3: gmac-3v3 { @@ -229,6 +233,6 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; enable-active-high; - gpio = <&pio 7 21 0>; + gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index b8e568c55271..5add9f243ec3 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele M3"; @@ -61,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -101,8 +105,8 @@ led_pins_m3: led_pins@0 { allwinner,pins = "PH20"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -127,7 +131,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -154,7 +158,7 @@ blue { label = "m3:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 3f3ff9693992..12ded69d61eb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -49,8 +49,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME"; @@ -62,7 +66,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -98,15 +102,15 @@ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_olinuxinolime: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -125,7 +129,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -152,14 +156,14 @@ green { label = "a20-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index ed364d5e755e..260dbd3bf29d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -46,8 +46,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME2"; @@ -59,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -95,15 +99,15 @@ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_olinuxinolime: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -122,7 +126,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -199,14 +203,14 @@ green { label = "a20-olinuxino-lime2:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 66cc77707198..714e15ac5416 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -12,8 +12,13 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -39,7 +44,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -49,7 +54,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 0>; /* PH11 */ + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ cd-inverted; status = "okay"; }; @@ -91,15 +96,69 @@ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { allwinner,pins = "PH11"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Search"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; + + button@1184 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1184678>; + }; + + button@1398 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1398804>; }; }; @@ -130,7 +189,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -169,7 +228,7 @@ green { label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 8dca49b2477b..0a2c2aeb4687 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -47,10 +47,13 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LinkSprite pcDuino3"; @@ -62,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -102,15 +105,15 @@ led_pins_pcduino3: led_pins@0 { allwinner,pins = "PH15", "PH16"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; key_pins_pcduino3: key_pins@0 { allwinner,pins = "PH17", "PH18", "PH19"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -135,7 +138,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -203,7 +206,7 @@ }; reg_ahci_5v: ahci-5v { - gpio = <&pio 7 2 0>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 89749ce34a84..786d491542ac 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,7 +47,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -68,16 +74,49 @@ <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + status = "disabled"; + }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1450000 + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 900000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <7>; }; cpu@1 { @@ -87,22 +126,54 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; pmu { compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; - interrupts = <0 120 4>, - <0 121 4>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; clocks { @@ -454,13 +525,13 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x01c00030 0x0c>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; dma: dma-controller@01c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 27 4>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 6>; #dma-cells = <2>; }; @@ -468,10 +539,11 @@ spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; - interrupts = <0 10 4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -481,10 +553,11 @@ spi1: spi@01c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; - interrupts = <0 11 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -494,12 +567,12 @@ emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; - interrupts = <0 55 4>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 17>; status = "disabled"; }; - mdio@01c0b080 { + mdio: mdio@01c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -512,7 +585,7 @@ reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk>; clock-names = "ahb", "mmc"; - interrupts = <0 32 4>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -521,7 +594,7 @@ reg = <0x01c10000 0x1000>; clocks = <&ahb_gates 9>, <&mmc1_clk>; clock-names = "ahb", "mmc"; - interrupts = <0 33 4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -530,7 +603,7 @@ reg = <0x01c11000 0x1000>; clocks = <&ahb_gates 10>, <&mmc2_clk>; clock-names = "ahb", "mmc"; - interrupts = <0 34 4>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -539,7 +612,7 @@ reg = <0x01c12000 0x1000>; clocks = <&ahb_gates 11>, <&mmc3_clk>; clock-names = "ahb", "mmc"; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -558,7 +631,7 @@ ehci0: usb@01c14000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; phy-names = "usb"; @@ -568,7 +641,7 @@ ohci0: usb@01c14400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; - interrupts = <0 64 4>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk 6>, <&ahb_gates 2>; phys = <&usbphy 1>; phy-names = "usb"; @@ -578,10 +651,11 @@ spi2: spi@01c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; - interrupts = <0 12 4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -591,7 +665,7 @@ ahci: sata@01c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; - interrupts = <0 56 4>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pll6 0>, <&ahb_gates 25>; status = "disabled"; }; @@ -599,7 +673,7 @@ ehci1: usb@01c1c000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; - interrupts = <0 40 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 3>; phys = <&usbphy 2>; phy-names = "usb"; @@ -609,7 +683,7 @@ ohci1: usb@01c1c400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk 7>, <&ahb_gates 4>; phys = <&usbphy 2>; phy-names = "usb"; @@ -619,10 +693,11 @@ spi3: spi@01c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 31>, <&dma 1 30>; + dmas = <&dma SUN4I_DMA_DEDICATED 31>, + <&dma SUN4I_DMA_DEDICATED 30>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -632,7 +707,7 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 28 4>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -643,99 +718,99 @@ pwm0_pins_a: pwm0@0 { allwinner,pins = "PB2"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; pwm1_pins_a: pwm1@0 { allwinner,pins = "PI3"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart2_pins_a: uart2@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "uart2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart3_pins_a: uart3@0 { allwinner,pins = "PG6", "PG7", "PG8", "PG9"; allwinner,function = "uart3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart3_pins_b: uart3@1 { allwinner,pins = "PH0", "PH1"; allwinner,function = "uart3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart4_pins_a: uart4@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "uart4"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart5_pins_a: uart5@0 { allwinner,pins = "PI10", "PI11"; allwinner,function = "uart5"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart6_pins_a: uart6@0 { allwinner,pins = "PI12", "PI13"; allwinner,function = "uart6"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart7_pins_a: uart7@0 { allwinner,pins = "PI20", "PI21"; allwinner,function = "uart7"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB18", "PB19"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB20", "PB21"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c3_pins_a: i2c3@0 { allwinner,pins = "PI0", "PI1"; allwinner,function = "i2c3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; emac_pins_a: emac0@0 { @@ -745,22 +820,22 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; clk_out_a_pins_a: clk_out_a@0 { allwinner,pins = "PI12"; allwinner,function = "clk_out_a"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; clk_out_b_pins_a: clk_out_b@0 { allwinner,pins = "PI13"; allwinner,function = "clk_out_b"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_mii_a: gmac_mii@0 { @@ -770,8 +845,8 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "gmac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_rgmii_a: gmac_rgmii@0 { @@ -785,90 +860,104 @@ * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <3>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi0_pins_a: spi0@0 { allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; allwinner,function = "spi0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi1_pins_a: spi1@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "spi1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_a: spi2@0 { allwinner,pins = "PC19", "PC20", "PC21", "PC22"; allwinner,function = "spi2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_b: spi2@1 { allwinner,pins = "PB14", "PB15", "PB16", "PB17"; allwinner,function = "spi2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { allwinner,pins = "PH1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc2_pins_a: mmc2@0 { allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; allwinner,function = "mmc2"; - allwinner,drive = <2>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc3_pins_a: mmc3@0 { allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; allwinner,function = "mmc3"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ir0_pins_a: ir0@0 { allwinner,pins = "PB3","PB4"; allwinner,function = "ir0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ir1_pins_a: ir1@0 { allwinner,pins = "PB22","PB23"; allwinner,function = "ir1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <0 22 4>, - <0 23 4>, - <0 24 4>, - <0 25 4>, - <0 67 4>, - <0 68 4>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -880,7 +969,7 @@ rtc: rtc@01c20d00 { compatible = "allwinner,sun7i-a20-rtc"; reg = <0x01c20d00 0x20>; - interrupts = <0 24 4>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; }; pwm: pwm@01c20e00 { @@ -895,7 +984,7 @@ compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; clock-names = "apb", "ir"; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c21800 0x40>; status = "disabled"; }; @@ -904,11 +993,18 @@ compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 7>, <&ir1_clk>; clock-names = "apb", "ir"; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c21c00 0x40>; status = "disabled"; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; @@ -917,13 +1013,14 @@ rtp: rtp@01c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; - interrupts = <0 29 4>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; }; uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -933,7 +1030,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -943,7 +1040,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -953,7 +1050,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -963,7 +1060,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 17 4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -973,7 +1070,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 18 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -983,7 +1080,7 @@ uart6: serial@01c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; - interrupts = <0 19 4>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 22>; @@ -993,7 +1090,7 @@ uart7: serial@01c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; - interrupts = <0 20 4>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 23>; @@ -1003,7 +1100,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 0>; status = "disabled"; #address-cells = <1>; @@ -1013,7 +1110,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 1>; status = "disabled"; #address-cells = <1>; @@ -1023,7 +1120,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 2>; status = "disabled"; #address-cells = <1>; @@ -1033,7 +1130,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 88 4>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 3>; status = "disabled"; #address-cells = <1>; @@ -1043,7 +1140,7 @@ i2c4: i2c@01c2c000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; - interrupts = <0 89 4>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 15>; status = "disabled"; #address-cells = <1>; @@ -1053,7 +1150,7 @@ gmac: ethernet@01c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>; - interrupts = <0 85 4>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&ahb_gates 49>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; @@ -1068,10 +1165,10 @@ hstimer@01c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; - interrupts = <0 81 4>, - <0 82 4>, - <0 83 4>, - <0 84 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 28>; }; @@ -1083,7 +1180,23 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + ps20: ps2@01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; + + ps21: ps2@01c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 7>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts new file mode 100644 index 000000000000..dd31c53e2ab6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate + * dtb file since some gpio-s surrounding the wlan/bluetooth are different, + * and it uses different camera sensors. + */ + +#include "sun8i-a23-ippo-q8h-v5.dts" + +/ { + model = "Ippo Q8H Dual Core Tablet (v1.2)"; + compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 32ad80804dbb..623573e46080 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun8i-a23.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Ippo Q8H Dual Core Tablet (v5)"; @@ -69,7 +73,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; status = "okay"; }; @@ -78,8 +82,27 @@ mmc0_cd_pin_q8h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 86584fcf5e32..dd34527293e4 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -47,11 +47,29 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -233,7 +251,7 @@ dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; @@ -246,7 +264,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 8>; reset-names = "ahb"; - interrupts = <0 60 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -257,7 +275,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 9>; reset-names = "ahb"; - interrupts = <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -268,16 +286,16 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 10>; reset-names = "ahb"; - interrupts = <0 62 4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-a23-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 17 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -288,43 +306,43 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PF2", "PF4"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc1_pins_a: mmc1@0 { allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; allwinner,function = "mmc1"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PH4", "PH5"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PE12", "PE13"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -349,21 +367,28 @@ timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; wdt0: watchdog@01c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -376,7 +401,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -389,7 +414,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -402,7 +427,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -415,7 +440,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -428,7 +453,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 0>; resets = <&apb2_rst 0>; status = "disabled"; @@ -439,7 +464,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 1>; resets = <&apb2_rst 1>; status = "disabled"; @@ -450,7 +475,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 2>; resets = <&apb2_rst 2>; status = "disabled"; @@ -466,13 +491,14 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; - interrupts = <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; prcm@01f01400 { @@ -522,7 +548,7 @@ r_uart: serial@01f02800 { compatible = "snps,dw-apb-uart"; reg = <0x01f02800 0x400>; - interrupts = <0 38 4>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb0_gates 4>; @@ -533,7 +559,7 @@ r_pio: pinctrl@01f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <0 45 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>; resets = <&apb0_rst 0>; gpio-controller; @@ -545,8 +571,8 @@ r_uart_pins_a: r_uart@0 { allwinner,pins = "PL2", "PL3"; allwinner,function = "s_uart"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 11ec71072e81..a3fed2bdf620 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -48,7 +48,11 @@ */ /dts-v1/; -/include/ "sun9i-a80.dtsi" +#include "sun9i-a80.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A80 Optimus Board"; @@ -63,45 +67,6 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - pio: pinctrl@06000800 { - i2c3_pins_a: i2c3@0 { - /* Enable internal pull-up */ - allwinner,pull = <1>; - }; - - led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - uart4_pins_a: uart4@0 { - /* Enable internal pull-up */ - allwinner,pull = <1>; - }; - }; - - uart0: serial@07000000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - uart4: serial@07001000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; - }; - - i2c3: i2c@07003400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -111,14 +76,77 @@ led2 { label = "optimus:led2:usr"; - gpios = <&pio 7 1 0>; + gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; }; /* led3 is on PM15, in R_PIO */ led4 { label = "optimus:led4:usr"; - gpios = <&pio 7 0 0>; + gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; }; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; +}; + +&i2c3_pins_a { + /* Enable internal pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + led_pins_optimus: led-pins@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_optimus: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart4_pins_a { + /* Enable internal pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 9ef4438206a9..f0f6fb91f8c3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -47,7 +47,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton64.dtsi" +#include "skeleton64.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -205,11 +209,50 @@ clock-output-names = "cci400"; }; + mmc0_clk: clk@06000410 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000410 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc0", "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@06000414 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000414 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc1", "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@06000418 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000418 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc2", "mmc2_output", + "mmc2_sample"; + }; + + mmc3_clk: clk@0600041c { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x0600041c 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc3", "mmc3_output", + "mmc3_sample"; + }; + ahb0_gates: clk@06000580 { #clock-cells = <1>; compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; reg = <0x06000580 0x4>; clocks = <&ahb0>; + clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>, + <14>, <15>, <16>, <18>, <20>, <21>, + <22>, <23>; clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", "ahb0_ss", "ahb0_sd", "ahb0_nand1", "ahb0_nand0", "ahb0_sdram", @@ -223,6 +266,7 @@ compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; reg = <0x06000584 0x4>; clocks = <&ahb1>; + clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>; clock-output-names = "ahb1_usbotg", "ahb1_usbhci", "ahb1_gmac", "ahb1_msgbox", "ahb1_spinlock", "ahb1_hstimer", @@ -234,6 +278,8 @@ compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; reg = <0x06000588 0x4>; clocks = <&ahb2>; + clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>, + <11>; clock-output-names = "ahb2_lcd0", "ahb2_lcd1", "ahb2_edp", "ahb2_csi", "ahb2_hdmi", "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; @@ -244,6 +290,8 @@ compatible = "allwinner,sun9i-a80-apb0-gates-clk"; reg = <0x06000590 0x4>; clocks = <&apb0>; + clock-indices = <1>, <5>, <11>, <12>, <13>, <15>, + <17>, <18>, <19>; clock-output-names = "apb0_spdif", "apb0_pio", "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_lradc", "apb0_gpadc", "apb0_twd", @@ -255,6 +303,8 @@ compatible = "allwinner,sun9i-a80-apb1-gates-clk"; reg = <0x06000594 0x4>; clocks = <&apb1>; + clock-indices = <0>, <1>, <2>, <3>, <4>, + <16>, <17>, <18>, <19>, <20>, <21>; clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", "apb1_uart0", "apb1_uart1", @@ -273,6 +323,67 @@ */ ranges = <0 0 0 0x20000000>; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, + <&mmc0_clk 1>, <&mmc0_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, + <&mmc1_clk 1>, <&mmc1_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, + <&mmc2_clk 1>, <&mmc2_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, + <&mmc3_clk 1>, <&mmc3_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 3>; + reset-names = "ahb"; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc_config_clk: clk@01c13000 { + compatible = "allwinner,sun9i-a80-mmc-config-clk"; + reg = <0x01c13000 0x10>; + clocks = <&ahb0_gates 8>; + clock-names = "ahb"; + resets = <&ahb0_resets 8>; + reset-names = "ahb"; + #clock-cells = <1>; + #reset-cells = <1>; + clock-output-names = "mmc0_config", "mmc1_config", + "mmc2_config", "mmc3_config"; + }; + gic: interrupt-controller@01c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, @@ -281,7 +392,7 @@ <0x01c46000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; ahb0_resets: reset@060005a0 { @@ -317,12 +428,12 @@ timer@06000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>, - <0 20 4>, - <0 21 4>, - <0 22 4>, - <0 23 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -330,11 +441,11 @@ pio: pinctrl@06000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>, - <0 120 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -345,29 +456,46 @@ i2c3_pins_a: i2c3@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "i2c3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins: mmc0 { + allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_a: uart0@0 { allwinner,pins = "PH12", "PH13"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart4_pins_a: uart4@0 { allwinner,pins = "PG12", "PG13", "PG14", "PG15"; allwinner,function = "uart4"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; uart0: serial@07000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -378,7 +506,7 @@ uart1: serial@07000400 { compatible = "snps,dw-apb-uart"; reg = <0x07000400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -389,7 +517,7 @@ uart2: serial@07000800 { compatible = "snps,dw-apb-uart"; reg = <0x07000800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -400,7 +528,7 @@ uart3: serial@07000c00 { compatible = "snps,dw-apb-uart"; reg = <0x07000c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -411,7 +539,7 @@ uart4: serial@07001000 { compatible = "snps,dw-apb-uart"; reg = <0x07001000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -422,7 +550,7 @@ uart5: serial@07001400 { compatible = "snps,dw-apb-uart"; reg = <0x07001400 0x400>; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -433,7 +561,7 @@ i2c0: i2c@07002800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 0>; resets = <&apb1_resets 0>; status = "disabled"; @@ -444,7 +572,7 @@ i2c1: i2c@07002c00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 1>; resets = <&apb1_resets 1>; status = "disabled"; @@ -455,7 +583,7 @@ i2c2: i2c@07003000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 2>; resets = <&apb1_resets 2>; status = "disabled"; @@ -466,7 +594,7 @@ i2c3: i2c@07003400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 3>; resets = <&apb1_resets 3>; status = "disabled"; @@ -477,7 +605,7 @@ i2c4: i2c@07003800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; - interrupts = <0 10 4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 4>; resets = <&apb1_resets 4>; status = "disabled"; @@ -488,13 +616,13 @@ r_wdt: watchdog@08001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; - interrupts = <0 36 4>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; }; r_uart: serial@08002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; - interrupts = <0 38 4>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&osc24M>; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index d8876634f965..e02baa66b33c 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -47,39 +47,40 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/ { - soc@01c00000 { - pio: pinctrl@01c20800 { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB9"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; +&pio { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PB8"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH3"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - }; + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +/ { reg_ahci_5v: ahci-5v { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -89,7 +90,7 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; enable-active-high; - gpio = <&pio 1 8 0>; + gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -101,7 +102,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 1 9 0>; + gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -113,7 +114,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 7 6 0>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -125,7 +126,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 7 3 0>; + gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 53181d310247..004e8e4e1c04 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -1131,6 +1131,8 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + nvidia,mic-det-gpios = + <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8acf5d85c99d..e5527f742696 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -68,9 +68,9 @@ reset-names = "2d"; }; - gr3d@54140000 { + gr3d@54180000 { compatible = "nvidia,tegra20-gr3d"; - reg = <0x54140000 0x00040000>; + reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; @@ -130,9 +130,9 @@ status = "disabled"; }; - dsi@542c0000 { + dsi@54300000 { compatible = "nvidia,tegra20-dsi"; - reg = <0x542c0000 0x00040000>; + reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_DSI>; resets = <&tegra_car 48>; reset-names = "dsi"; @@ -140,7 +140,7 @@ }; }; - timer@50004600 { + timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index cbf5a1ae0ca7..a1b682ea01bd 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -189,7 +189,7 @@ /* ALS and Proximity sensor */ isl29028@44 { - compatible = "isl,isl29028"; + compatible = "isil,isl29028"; reg = <0x44>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 99475f6e76a3..db4810df142c 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -225,7 +225,7 @@ }; }; - timer@50004600 { + timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 56a452bc326c..36cafbfa1bfa 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -35,7 +35,7 @@ regulator-name = "usbh_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; + gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; vin-supply = <&sys_5v0_reg>; }; }; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 82f5728be5c9..5c2b7320856d 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -31,7 +31,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; &fec1 { @@ -121,6 +121,7 @@ pinctrl_fec1: fec1grp { fsl,pins = < + VF610_PAD_PTA6__RMII_CLKOUT 0x30d2 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index de6700542714..1dbf8d2d1ddf 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -94,23 +94,23 @@ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio1 { +&gpio0 { interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio2 { +&gpio1 { interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio3 { +&gpio2 { interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio4 { +&gpio3 { interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio5 { +&gpio4 { interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; }; @@ -130,6 +130,14 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; }; +&snvsrtc { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&src { + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; +}; + &uart0 { interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; }; @@ -169,3 +177,8 @@ &usbphy1 { interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; }; + +&wdoga5 { + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index f2b64b1b00fa..f64fddce3e2a 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -123,7 +123,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 505969ae8093..a29c7ce15eaf 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -22,11 +22,11 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; usbphy0 = &usbphy0; usbphy1 = &usbphy1; }; @@ -43,6 +43,13 @@ clock-frequency = <32768>; }; + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&src>; + offset = <0x0>; + mask = <0x1000>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -184,7 +191,7 @@ status = "disabled"; }; - wdog@4003e000 { + wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; clocks = <&clks VF610_CLK_WDT>; @@ -209,7 +216,7 @@ #gpio-range-cells = <3>; }; - gpio1: gpio@40049000 { + gpio0: gpio@40049000 { compatible = "fsl,vf610-gpio"; reg = <0x40049000 0x1000 0x400ff000 0x40>; gpio-controller; @@ -219,7 +226,7 @@ gpio-ranges = <&iomuxc 0 0 32>; }; - gpio2: gpio@4004a000 { + gpio1: gpio@4004a000 { compatible = "fsl,vf610-gpio"; reg = <0x4004a000 0x1000 0x400ff040 0x40>; gpio-controller; @@ -229,7 +236,7 @@ gpio-ranges = <&iomuxc 0 32 32>; }; - gpio3: gpio@4004b000 { + gpio2: gpio@4004b000 { compatible = "fsl,vf610-gpio"; reg = <0x4004b000 0x1000 0x400ff080 0x40>; gpio-controller; @@ -239,7 +246,7 @@ gpio-ranges = <&iomuxc 0 64 32>; }; - gpio4: gpio@4004c000 { + gpio3: gpio@4004c000 { compatible = "fsl,vf610-gpio"; reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; gpio-controller; @@ -249,7 +256,7 @@ gpio-ranges = <&iomuxc 0 96 32>; }; - gpio5: gpio@4004d000 { + gpio4: gpio@4004d000 { compatible = "fsl,vf610-gpio"; reg = <0x4004d000 0x1000 0x400ff100 0x40>; gpio-controller; @@ -318,6 +325,11 @@ clocks = <&clks VF610_CLK_USBC0>; status = "disabled"; }; + + src: src@4006e000 { + compatible = "fsl,vf610-src", "syscon"; + reg = <0x4006e000 0x1000>; + }; }; aips1: aips-bus@40080000 { @@ -339,6 +351,20 @@ status = "disabled"; }; + snvs0: snvs@400a7000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400a7000 0x2000>; + + snvsrtc: snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + clocks = <&clks VF610_CLK_SNVS>; + clock-names = "snvs-rtc"; + }; + }; + uart4: serial@400a9000 { compatible = "fsl,vf610-lpuart"; reg = <0x400a9000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index ee3e5d675b05..a5cd2eda3edf 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -237,7 +237,7 @@ slcr: slcr@f8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,zynq-slcr", "syscon"; + compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { @@ -257,6 +257,12 @@ "dbg_trc", "dbg_apb"; reg = <0x100 0x100>; }; + + pinctrl0: pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + }; }; dmac_s: dmac@f8003000 { @@ -314,14 +320,32 @@ clocks = <&clkc 4>; }; + usb0: usb@e0002000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 28>; + interrupt-parent = <&intc>; + interrupts = <0 21 4>; + reg = <0xe0002000 0x1000>; + phy_type = "ulpi"; + }; + + usb1: usb@e0003000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 29>; + interrupt-parent = <&intc>; + interrupts = <0 44 4>; + reg = <0xe0003000 0x1000>; + phy_type = "ulpi"; + }; + watchdog0: watchdog@f8005000 { clocks = <&clkc 45>; - compatible = "xlnx,zynq-wdt-r1p2"; - device_type = "watchdog"; + compatible = "cdns,wdt-r1p2"; interrupt-parent = <&intc>; interrupts = <0 9 1>; reg = <0xf8005000 0x1000>; - reset = <0>; timeout-sec = <10>; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 280f02dd4ddc..1fc1d3911e9b 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -18,6 +18,12 @@ model = "Zynq ZC702 Development Board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x40000000>; @@ -36,10 +42,17 @@ linux,default-trigger = "heartbeat"; }; }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; }; &can0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; }; &clkc { @@ -50,15 +63,24 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; ethernet_phy: ethernet-phy@7 { reg = <7>; }; }; +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; i2cswitch@74 { compatible = "nxp,pca9548"; @@ -132,10 +154,212 @@ }; }; +&pinctrl0 { + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO46"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO47"; + bias-disable; + }; + }; + + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7", "MIO8"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 34f7812d2ee8..850518d9b8ac 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -18,6 +18,12 @@ model = "Zynq ZC706 Development Board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x40000000>; @@ -27,6 +33,10 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; }; &clkc { @@ -37,15 +47,24 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; ethernet_phy: ethernet-phy@7 { reg = <7>; }; }; +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; i2cswitch@74 { compatible = "nxp,pca9548"; @@ -111,10 +130,185 @@ }; }; +&pinctrl0 { + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + low-power-enable; + bias-disable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO46", "MIO47"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_14_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_14_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 1c7cc990b47a..5658bc8434de 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -18,6 +18,11 @@ model = "Zynq Zed Development Board"; compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x20000000>; @@ -27,6 +32,10 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; }; &clkc { @@ -50,3 +59,9 @@ &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; |
