diff options
Diffstat (limited to 'arch')
48 files changed, 264 insertions, 108 deletions
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 0d35ab64641c..7106114c7464 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -74,6 +74,7 @@ audio_codec: tlv320aic3106@1b { compatible = "ti,tlv320aic3106"; reg = <0x1b>; + ai3x-micbias-vg = <0x2>; }; accel: lis331dlh@1d { @@ -153,7 +154,7 @@ ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", - "LINE1L", "Line In"; + "MIC3L", "Mic3L Switch"; }; &mcasp0 { @@ -438,41 +439,50 @@ regulators { dcdc1_reg: regulator@0 { /* VDD_1V8 system supply */ + regulator-always-on; }; dcdc2_reg: regulator@1 { /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; + regulator-max-microvolt = <1150000>; regulator-boot-on; + regulator-always-on; }; dcdc3_reg: regulator@2 { /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1325000>; regulator-boot-on; + regulator-always-on; }; ldo1_reg: regulator@3 { /* VRTC 1.8V always-on supply */ + regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { /* 3.3V rail */ + regulator-name = "vdd_3v3aux"; + regulator-always-on; }; ldo3_reg: regulator@5 { /* VDD_3V3A 3.3V rail */ + regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo4_reg: regulator@6 { /* VDD_3V3B 3.3V rail */ + regulator-name = "vdd_3v3b"; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 9c7fb0acae79..4e42f30cb318 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -22,6 +22,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) @@ -34,6 +35,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB) @@ -45,6 +47,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2) @@ -53,6 +56,7 @@ MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A) diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index d7201333e3bc..2db99433e17f 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -138,8 +138,8 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_cam: cam-power-domain@10023C00 { diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index e0abfc3324d1..e050d85cdacd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -127,6 +127,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck1_reg>; +}; + &fimd { pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 98f3ce65cb9a..ba34886f8b65 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -188,6 +188,10 @@ }; }; +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + &dsi_0 { vddcore-supply = <&vusb_reg>; vddio-supply = <&vmipi_reg>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index d4f2b11319dd..775892b2cc6a 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -548,6 +548,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm_reg>; +}; + &pinctrl_1 { hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 10d3c173396e..3e5ba665d200 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -40,6 +40,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <160000>; + + operating-points = < + 1200000 1250000 + 1000000 1150000 + 800000 1075000 + 500000 975000 + 400000 975000 + 200000 950000 + >; cooling-min-level = <4>; cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index c892d58e8dad..b995333ea22b 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -468,6 +468,7 @@ interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; clocks = <&clks 26>; + #io-channel-cells = <1>; }; spdif@80054000 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index bc215e4b75fd..b69be5c499cf 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -108,7 +108,7 @@ }; gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, @@ -117,7 +117,7 @@ }; gpt2: timer@10004000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, @@ -126,7 +126,7 @@ }; gpt3: timer@10005000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, @@ -376,7 +376,7 @@ }; gpt4: timer@10019000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, @@ -385,7 +385,7 @@ }; gpt5: timer@1001a000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, @@ -436,7 +436,7 @@ }; gpt6: timer@1001f000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index b6478e97d6a7..e6540b5cfa4c 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -286,8 +286,8 @@ can1: can@53fe4000 { compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; reg = <0x53fe4000 0x1000>; - clocks = <&clks 33>; - clock-names = "ipg"; + clocks = <&clks 33>, <&clks 33>; + clock-names = "ipg", "per"; interrupts = <43>; status = "disabled"; }; @@ -295,8 +295,8 @@ can2: can@53fe8000 { compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; reg = <0x53fe8000 0x1000>; - clocks = <&clks 34>; - clock-names = "ipg"; + clocks = <&clks 34>, <&clks 34>; + clock-names = "ipg", "per"; interrupts = <44>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 181ae5ebf23f..ab4ba39f2ed9 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -295,9 +295,10 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync>; + ddc-i2c-bus = <&i2c2>; fsl,tve-mode = "vga"; - fsl,hsync-pin = <4>; - fsl,vsync-pin = <6>; + fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */ + fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */ status = "okay"; }; diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi index 4773d6af66a0..d56d68fe7ffc 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/k2e-clocks.dtsi @@ -13,9 +13,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 50e555eab50d..1b6494fbdb91 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -86,7 +86,7 @@ gpio,syscon-dev = <&devctrl 0x240>; }; - pcie@21020000 { + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; clock-names = "pcie"; @@ -96,6 +96,7 @@ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi index d5adee3c0067..af9b7190533a 100644 --- a/arch/arm/boot/dts/k2hk-clocks.dtsi +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi @@ -22,9 +22,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi index eb1e3e29f073..ef8464bb11ff 100644 --- a/arch/arm/boot/dts/k2l-clocks.dtsi +++ b/arch/arm/boot/dts/k2l-clocks.dtsi @@ -22,9 +22,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c06542b2c954..e7a6f6deabb6 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -286,7 +286,7 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; - pcie@21800000 { + pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; clock-names = "pcie"; @@ -296,6 +296,7 @@ ranges = <0x81000000 0 0 0x23250000 0 0x4000 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 233c69e50ae3..df8908adb0cb 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -120,7 +120,7 @@ lcd0: display@0 { compatible = "lgphilips,lb035q02"; - label = "lcd"; + label = "lcd35"; reg = <1>; /* CS1 */ spi-max-frequency = <10000000>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index f5395b7da912..048fd216970a 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -98,7 +98,7 @@ lcd0: display@0 { compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; + label = "lcd43"; pinctrl-names = "default"; pinctrl-0 = <<e430_pins>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index f884d6adb71e..7d31c6ff246f 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -551,6 +551,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -558,6 +559,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7d24ae0306b5..c8fd648a7108 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -612,6 +612,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -619,6 +620,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 71468a7eb28f..5e17fd147728 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -60,27 +60,27 @@ rxc-skew-ps = <2000>; }; -&mmc0 { - vmmc-supply = <®ulator_3_3v>; - vqmmc-supply = <®ulator_3_3v>; -}; - -&usb1 { - status = "okay"; -}; - &gpio2 { status = "okay"; }; -&i2c1{ +&i2c1 { status = "okay"; - accel1: accel1@53{ - compatible = "adxl34x"; + accel1: accelerometer@53 { + compatible = "adi,adxl345"; reg = <0x53>; - interrupt-parent = < &portc >; + interrupt-parent = <&portc>; interrupts = <3 2>; }; }; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 32dd55e5f4e6..6eaaf638e52e 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson U8540 platform with Device Tree"; compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory@0 { device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 651c56d400a4..c8b815819cfe 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -16,6 +16,13 @@ model = "ST-Ericsson CCU9540 platform with Device Tree"; compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 853684ad7773..b8f81fb418ce 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -15,6 +15,33 @@ #include "skeleton.dtsi" / { + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "ste,dbx500-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x300>; + }; + CPU1: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x301>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -22,32 +49,6 @@ interrupt-parent = <&intc>; ranges; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - core1 { - cpu = <&CPU1>; - }; - }; - }; - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - ptm@801ae000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x801ae000 0x1000>; @@ -971,7 +972,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - uart@80120000 { + ux500_serial0: uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; @@ -986,7 +987,7 @@ status = "disabled"; }; - uart@80121000 { + ux500_serial1: uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1001,7 +1002,7 @@ status = "disabled"; }; - uart@80007000 { + ux500_serial2: uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 744c1e3a744d..6d8ce154347e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -32,11 +32,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 2b1cb5b584b6..18e9795a94f9 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 59523f866812..24739914e689 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -16,4 +16,11 @@ / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 7f3975b58d16..b0278f4c486c 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -23,6 +23,11 @@ }; soc { + /* Enable UART1 on this board */ + uart@80121000 { + status = "okay"; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 8c6a2de56cf1..c2e1ba019a2f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -19,6 +19,13 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index d53cccdce776..ebd8547e98f1 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -18,4 +18,11 @@ / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index a4bc9e77d640..810cda743b6d 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -43,15 +43,26 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>; + <&touch_hrefv60_mode>, + <&gpios_hrefv60_mode>; sdi0 { - /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { + /* SD card detect GPIO pin, extend default state */ default_hrefv60_cfg1 { pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; ipgpio { @@ -213,6 +224,16 @@ }; }; }; + gpios { + /* Dangling GPIO pins */ + gpios_hrefv60_mode: gpios_hrefv60 { + default_cfg1 { + /* Normally UART1 RXD, now dangling */ + pins = "GPIO4_AH6"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 3d0b8755caee..3d25dba143a5 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -17,6 +17,7 @@ }; aliases { + serial1 = &uart1; stmpe-i2c0 = &stmpe0; stmpe-i2c1 = &stmpe1; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 85d3b95dfdba..3c140d05f796 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -15,6 +15,10 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + aliases { + serial1 = &uart1; + }; + src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 9a5f2ba139b7..ef794a33b4dc 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -757,6 +757,7 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart0_default_mux>; + status = "disabled"; }; uart1: uart@101fb000 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 9edadc37719f..32a5ccb14e7e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -18,6 +18,13 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -223,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -452,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 80bad29d609a..8c4467fad837 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -291,8 +291,6 @@ void __init imx_gpc_check_dt(void) } } -#ifdef CONFIG_PM_GENERIC_DOMAINS - static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd) { int iso, iso2sw; @@ -399,7 +397,6 @@ static struct genpd_onecell_data imx_gpc_onecell_data = { static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) { struct clk *clk; - bool is_off; int i; imx6q_pu_domain.reg = pu_reg; @@ -416,18 +413,13 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) } imx6q_pu_domain.num_clks = i; - is_off = IS_ENABLED(CONFIG_PM); - if (is_off) { - _imx6q_pm_pu_power_off(&imx6q_pu_domain.base); - } else { - /* - * Enable power if compiled without CONFIG_PM in case the - * bootloader disabled it. - */ - imx6q_pm_pu_power_on(&imx6q_pu_domain.base); - } + /* Enable power always in case bootloader disabled it. */ + imx6q_pm_pu_power_on(&imx6q_pu_domain.base); + + if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) + return 0; - pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off); + pm_genpd_init(&imx6q_pu_domain.base, NULL, false); return of_genpd_add_provider_onecell(dev->of_node, &imx_gpc_onecell_data); @@ -437,13 +429,6 @@ clk_err: return -EINVAL; } -#else -static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg) -{ - return 0; -} -#endif /* CONFIG_PM_GENERIC_DOMAINS */ - static int imx_gpc_probe(struct platform_device *pdev) { struct regulator *pu_reg; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e68ad9f6a51e..9e2a68456b81 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -60,6 +60,7 @@ config SOC_AM43XX select ARM_GIC select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 + select HAVE_ARM_SCU config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d78c12e7cb5e..486cc4ded190 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2373,6 +2373,9 @@ static int of_dev_hwmod_lookup(struct device_node *np, * registers. This address is needed early so the OCP registers that * are part of the device's address space can be ioremapped properly. * + * If SYSC access is not needed, the registers will not be remapped + * and non-availability of MPU access is not treated as an error. + * * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and * -ENXIO on absent or invalid register target address space. */ @@ -2387,6 +2390,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, _save_mpu_port_index(oh); + /* if we don't need sysc access we don't need to ioremap */ + if (!oh->class->sysc) + return 0; + + /* we can't continue without MPU PORT if we need sysc access */ if (oh->_int_flags & _HWMOD_NO_MPU_PORT) return -ENXIO; @@ -2396,8 +2404,10 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, oh->name); /* Extract the IO space from device tree blob */ - if (!np) + if (!np) { + pr_err("omap_hwmod: %s: no dt node\n", oh->name); return -ENXIO; + } va_start = of_iomap(np, index + oh->mpu_rt_idx); } else { @@ -2456,13 +2466,11 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->name, np->name); } - if (oh->class->sysc) { - r = _init_mpu_rt_base(oh, NULL, index, np); - if (r < 0) { - WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", - oh->name); - return 0; - } + r = _init_mpu_rt_base(oh, NULL, index, np); + if (r < 0) { + WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", + oh->name); + return 0; } r = _init_clocks(oh, NULL); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 2606c6608bd8..562247bced49 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -827,8 +827,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -844,7 +843,7 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { .class = &dra7xx_gpmc_hwmod_class, .clkdm_name = "l3main1_clkdm", /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ - .flags = HWMOD_SWSUP_SIDLE | DEBUG_OMAP_GPMC_HWMOD_FLAGS, + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .main_clk = "l3_iclk_div", .prcm = { .omap4 = { diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index c092730749b9..bf366b39fa61 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -24,6 +24,7 @@ #include <linux/ata_platform.h> #include <linux/serial_8250.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -144,6 +145,8 @@ static void __init capc7117_init(void) capc7117_uarts_init(); capc7117_ide_init(); + + regulator_has_full_constraints(); } MACHINE_START(CAPC7117, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index bb99f59a36d8..a17a91eb8e9a 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -13,6 +13,7 @@ #include <linux/syscore_ops.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> #include <linux/dm9000.h> #include <linux/leds.h> @@ -466,6 +467,8 @@ static void __init cmx2xx_init(void) cmx2xx_init_ac97(); cmx2xx_init_touchscreen(); cmx2xx_init_leds(); + + regulator_has_full_constraints(); } static void __init cmx2xx_init_irq(void) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 4d3588d26c2a..5851f4c254c1 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -835,6 +835,8 @@ static void __init cm_x300_init(void) cm_x300_init_ac97(); cm_x300_init_wi2wi(); cm_x300_init_bl(); + + regulator_has_full_constraints(); } static void __init cm_x300_fixup(struct tag *tags, char **cmdline) diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 5f9d9303b346..3503826333c7 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -18,6 +18,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/regulator/machine.h> #include <linux/ucb1400.h> #include <asm/mach/arch.h> @@ -294,6 +295,8 @@ static void __init colibri_pxa270_init(void) printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", colibri_pxa270_baseboard); } + + regulator_has_full_constraints(); } /* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 51531ecffca8..9d7072b04045 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1306,6 +1306,8 @@ static void __init em_x270_init(void) em_x270_init_i2c(); em_x270_init_camera(); em_x270_userspace_consumers_init(); + + regulator_has_full_constraints(); } MACHINE_START(EM_X270, "Compulab EM-X270") diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index c98511c5abd1..9b0eb0252af6 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -26,6 +26,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/can/platform/mcp251x.h> +#include <linux/regulator/machine.h> #include "generic.h" @@ -185,6 +186,8 @@ static void __init icontrol_init(void) mxm_8x10_mmc_init(); icontrol_can_init(); + + regulator_has_full_constraints(); } MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 872dcb20e757..066e3a250ee0 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/regulator/machine.h> #include <linux/i2c/pxa-i2c.h> #include <asm/types.h> @@ -534,6 +535,8 @@ static void __init trizeps4_init(void) BCR_writew(trizeps_conxs_bcr); board_backlight_power(1); + + regulator_has_full_constraints(); } static void __init trizeps4_map_io(void) diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index aa89488f961e..54122a983ae3 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -24,6 +24,7 @@ #include <linux/dm9000.h> #include <linux/ucb1400.h> #include <linux/ata_platform.h> +#include <linux/regulator/machine.h> #include <linux/regulator/max1586.h> #include <linux/i2c/pxa-i2c.h> @@ -711,6 +712,8 @@ static void __init vpac270_init(void) vpac270_ts_init(); vpac270_rtc_init(); vpac270_ide_init(); + + regulator_has_full_constraints(); } MACHINE_START(VPAC270, "Voipac PXA270") diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index a55827b44fae..6f94dd7b4dee 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -869,6 +869,8 @@ static void __init zeus_init(void) i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices)); pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info); spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info)); + + regulator_has_full_constraints(); } static struct map_desc zeus_io_desc[] __initdata = { |
