summaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers')
-rw-r--r--arch/sh/drivers/dma/dma-pvr2.c10
-rw-r--r--arch/sh/drivers/dma/dma-sh.c31
-rw-r--r--arch/sh/drivers/dma/dmabrg.c22
-rw-r--r--arch/sh/drivers/heartbeat.c22
-rw-r--r--arch/sh/drivers/pci/Makefile5
-rw-r--r--arch/sh/drivers/pci/common.c162
-rw-r--r--arch/sh/drivers/pci/fixups-dreamcast.c2
-rw-r--r--arch/sh/drivers/pci/fixups-r7780rp.c12
-rw-r--r--arch/sh/drivers/pci/fixups-rts7751r2d.c4
-rw-r--r--arch/sh/drivers/pci/fixups-sdk7780.c19
-rw-r--r--arch/sh/drivers/pci/fixups-se7751.c6
-rw-r--r--arch/sh/drivers/pci/ops-sh4.c30
-rw-r--r--arch/sh/drivers/pci/pci-dreamcast.c32
-rw-r--r--arch/sh/drivers/pci/pci-sh4.h18
-rw-r--r--arch/sh/drivers/pci/pci-sh5.c19
-rw-r--r--arch/sh/drivers/pci/pci-sh5.h12
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.c52
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c408
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.h64
-rw-r--r--arch/sh/drivers/pci/pci.c173
-rw-r--r--arch/sh/drivers/pci/pcie-sh7786.c205
-rw-r--r--arch/sh/drivers/pci/pcie-sh7786.h74
-rw-r--r--arch/sh/drivers/superhyway/ops-sh4-202.c8
23 files changed, 914 insertions, 476 deletions
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 391cbe1c2956..3cee58e7f1e5 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -40,10 +40,10 @@ static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
static int pvr2_request_dma(struct dma_channel *chan)
{
- if (ctrl_inl(PVR2_DMA_MODE) != 0)
+ if (__raw_readl(PVR2_DMA_MODE) != 0)
return -EBUSY;
- ctrl_outl(0, PVR2_DMA_LMMODE0);
+ __raw_writel(0, PVR2_DMA_LMMODE0);
return 0;
}
@@ -60,9 +60,9 @@ static int pvr2_xfer_dma(struct dma_channel *chan)
xfer_complete = 0;
- ctrl_outl(chan->dar, PVR2_DMA_ADDR);
- ctrl_outl(chan->count, PVR2_DMA_COUNT);
- ctrl_outl(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
+ __raw_writel(chan->dar, PVR2_DMA_ADDR);
+ __raw_writel(chan->count, PVR2_DMA_COUNT);
+ __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
return 0;
}
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 37fb5b8bbc3f..827208781ed5 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -52,11 +52,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
*
* iterations to complete the transfer.
*/
+static unsigned int ts_shift[] = TS_SHIFT;
static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
{
- u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ u32 chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
+ int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
+ ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
- return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
+ return ts_shift[cnt];
}
/*
@@ -70,13 +73,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
struct dma_channel *chan = dev_id;
u32 chcr;
- chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
if (!(chcr & CHCR_TE))
return IRQ_NONE;
chcr &= ~(CHCR_IE | CHCR_DE);
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
wake_up(&chan->wait_queue);
@@ -115,7 +118,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
chan->flags &= ~DMA_TEI_CAPABLE;
}
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
chan->flags |= DMA_CONFIGURED;
return 0;
@@ -126,13 +129,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
int irq;
u32 chcr;
- chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
chcr |= CHCR_DE;
if (chan->flags & DMA_TEI_CAPABLE)
chcr |= CHCR_IE;
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
if (chan->flags & DMA_TEI_CAPABLE) {
irq = get_dmte_irq(chan->chan);
@@ -150,9 +153,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
disable_irq(irq);
}
- chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+ chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
- ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+ __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
}
static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +186,12 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
*/
if (chan->sar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
- ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
+ __raw_writel(chan->sar, (dma_base_addr[chan->chan]+SAR));
if (chan->dar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
- ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
+ __raw_writel(chan->dar, (dma_base_addr[chan->chan] + DAR));
- ctrl_outl(chan->count >> calc_xmit_shift(chan),
+ __raw_writel(chan->count >> calc_xmit_shift(chan),
(dma_base_addr[chan->chan] + TCR));
sh_dmac_enable_dma(chan);
@@ -198,10 +201,10 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
static int sh_dmac_get_dma_residue(struct dma_channel *chan)
{
- if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
+ if (!(__raw_readl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
return 0;
- return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+ return __raw_readl(dma_base_addr[chan->chan] + TCR)
<< calc_xmit_shift(chan);
}
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 5e22689c2fcf..72622e307613 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -86,8 +86,8 @@ static irqreturn_t dmabrg_irq(int irq, void *data)
unsigned long dcr;
unsigned int i;
- dcr = ctrl_inl(DMABRGCR);
- ctrl_outl(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
+ dcr = __raw_readl(DMABRGCR);
+ __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
dcr &= dcr >> 8; /* ignore masked */
/* USB stuff, get it out of the way first */
@@ -109,17 +109,17 @@ static irqreturn_t dmabrg_irq(int irq, void *data)
static void dmabrg_disable_irq(unsigned int dmairq)
{
unsigned long dcr;
- dcr = ctrl_inl(DMABRGCR);
+ dcr = __raw_readl(DMABRGCR);
dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- ctrl_outl(dcr, DMABRGCR);
+ __raw_writel(dcr, DMABRGCR);
}
static void dmabrg_enable_irq(unsigned int dmairq)
{
unsigned long dcr;
- dcr = ctrl_inl(DMABRGCR);
+ dcr = __raw_readl(DMABRGCR);
dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- ctrl_outl(dcr, DMABRGCR);
+ __raw_writel(dcr, DMABRGCR);
}
int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
@@ -165,13 +165,13 @@ static int __init dmabrg_init(void)
printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
#endif
- ctrl_outl(0, DMABRGCR);
- ctrl_outl(0, DMACHCR0);
- ctrl_outl(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
+ __raw_writel(0, DMABRGCR);
+ __raw_writel(0, DMACHCR0);
+ __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
/* enable DMABRG mode, enable the DMAC */
- or = ctrl_inl(DMAOR);
- ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+ or = __raw_readl(DMAOR);
+ __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
"DMABRG USB address error", NULL);
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index a9339a6174fc..2acbc793032d 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -1,7 +1,7 @@
/*
* Generic heartbeat driver for regular LED banks
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2010 Paul Mundt
*
* Most SH reference boards include a number of individual LEDs that can
* be independently controlled (either via a pre-defined hardware
@@ -27,7 +27,7 @@
#include <asm/heartbeat.h>
#define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.2"
static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
@@ -98,7 +98,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
return -ENOMEM;
}
- hd->base = ioremap_nocache(res->start, res->end - res->start + 1);
+ hd->base = ioremap_nocache(res->start, resource_size(res));
if (unlikely(!hd->base)) {
dev_err(&pdev->dev, "ioremap failed\n");
@@ -117,8 +117,20 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
for (i = 0; i < hd->nr_bits; i++)
hd->mask |= (1 << hd->bit_pos[i]);
- if (!hd->regsize)
- hd->regsize = 8; /* default access size */
+ if (!hd->regsize) {
+ switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
+ case IORESOURCE_MEM_32BIT:
+ hd->regsize = 32;
+ break;
+ case IORESOURCE_MEM_16BIT:
+ hd->regsize = 16;
+ break;
+ case IORESOURCE_MEM_8BIT:
+ default:
+ hd->regsize = 8;
+ break;
+ }
+ }
setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd);
platform_set_drvdata(pdev, hd);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 08af1f459756..4a59e6890876 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -1,14 +1,14 @@
#
# Makefile for the PCI specific kernel interface routines under Linux.
#
-obj-y += pci.o
+obj-y += common.o pci.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += ops-sh7786.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
@@ -25,4 +25,3 @@ obj-$(CONFIG_SH_TITAN) += fixups-titan.o
obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o
-obj-$(CONFIG_SH_URQUELL) += pcie-sh7786.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
new file mode 100644
index 000000000000..dbf138199871
--- /dev/null
+++ b/arch/sh/drivers/pci/common.c
@@ -0,0 +1,162 @@
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
+ int top_bus, int busnr, int devfn)
+{
+ static struct pci_dev dev;
+ static struct pci_bus bus;
+
+ dev.bus = &bus;
+ dev.sysdata = hose;
+ dev.devfn = devfn;
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose->pci_ops;
+
+ if(busnr != top_bus)
+ /* Fake a parent bus structure. */
+ bus.parent = &bus;
+ else
+ bus.parent = NULL;
+
+ return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int __init early_##rw##_config_##size(struct pci_channel *hose, \
+ int top_bus, int bus, int devfn, int offset, type value) \
+{ \
+ return pci_##rw##_config_##size( \
+ fake_pci_dev(hose, top_bus, bus, devfn), \
+ offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int __init pci_is_66mhz_capable(struct pci_channel *hose,
+ int top_bus, int current_bus)
+{
+ u32 pci_devfn;
+ unsigned short vid;
+ int cap66 = -1;
+ u16 stat;
+
+ printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+ for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+ if (PCI_FUNC(pci_devfn))
+ continue;
+ if (early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_VENDOR_ID, &vid) !=
+ PCIBIOS_SUCCESSFUL)
+ continue;
+ if (vid == 0xffff)
+ continue;
+
+ /* check 66MHz capability */
+ if (cap66 < 0)
+ cap66 = 1;
+ if (cap66) {
+ early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS, &stat);
+ if (!(stat & PCI_STATUS_66MHZ)) {
+ printk(KERN_DEBUG
+ "PCI: %02x:%02x not 66MHz capable.\n",
+ current_bus, pci_devfn);
+ cap66 = 0;
+ break;
+ }
+ }
+ }
+
+ return cap66 > 0;
+}
+
+static void pcibios_enable_err(unsigned long __data)
+{
+ struct pci_channel *hose = (struct pci_channel *)__data;
+
+ del_timer(&hose->err_timer);
+ printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
+ enable_irq(hose->err_irq);
+}
+
+static void pcibios_enable_serr(unsigned long __data)
+{
+ struct pci_channel *hose = (struct pci_channel *)__data;
+
+ del_timer(&hose->serr_timer);
+ printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
+ enable_irq(hose->serr_irq);
+}
+
+void pcibios_enable_timers(struct pci_channel *hose)
+{
+ if (hose->err_irq) {
+ init_timer(&hose->err_timer);
+ hose->err_timer.data = (unsigned long)hose;
+ hose->err_timer.function = pcibios_enable_err;
+ }
+
+ if (hose->serr_irq) {
+ init_timer(&hose->serr_timer);
+ hose->serr_timer.data = (unsigned long)hose;
+ hose->serr_timer.function = pcibios_enable_serr;
+ }
+}
+
+/*
+ * A simple handler for the regular PCI status errors, called from IRQ
+ * context.
+ */
+unsigned int pcibios_handle_status_errors(unsigned long addr,
+ unsigned int status,
+ struct pci_channel *hose)
+{
+ unsigned int cmd = 0;
+
+ if (status & PCI_STATUS_REC_MASTER_ABORT) {
+ printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
+ cmd |= PCI_STATUS_REC_MASTER_ABORT;
+ }
+
+ if (status & PCI_STATUS_REC_TARGET_ABORT) {
+ printk(KERN_DEBUG "PCI: target abort: ");
+ pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
+ PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_MASTER_ABORT, 1);
+ printk("\n");
+
+ cmd |= PCI_STATUS_REC_TARGET_ABORT;
+ }
+
+ if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
+ printk(KERN_DEBUG "PCI: parity error detected: ");
+ pcibios_report_status(PCI_STATUS_PARITY |
+ PCI_STATUS_DETECTED_PARITY, 1);
+ printk("\n");
+
+ cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
+
+ /* Now back off of the IRQ for awhile */
+ if (hose->err_irq) {
+ disable_irq_nosync(hose->err_irq);
+ hose->err_timer.expires = jiffies + HZ;
+ add_timer(&hose->err_timer);
+ }
+ }
+
+ return cmd;
+}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index ed7f489936f1..942ef4f155f5 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -39,7 +39,7 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev)
/*
* We also assume that dev->devfn == 0
*/
- dev->resource[1].start = p->io_resource->start + 0x100;
+ dev->resource[1].start = p->resources[0].start + 0x100;
dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
/*
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 15ca65cb667e..08b2d8658a00 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -22,15 +22,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
return irq_tab[slot];
}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
- pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
- pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
- pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
- pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
- pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 7898f14d6641..e248516118a9 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -43,7 +43,7 @@ int pci_fixup_pcic(struct pci_channel *chan)
{
unsigned long bcr1, mcr;
- bcr1 = ctrl_inl(SH7751_BCR1);
+ bcr1 = __raw_readl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(chan, bcr1, SH4_PCIBCR1);
@@ -54,7 +54,7 @@ int pci_fixup_pcic(struct pci_channel *chan)
pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
- mcr = ctrl_inl(SH7751_MCR);
+ mcr = __raw_readl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(chan, mcr, SH4_PCIMCR);
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 250b0edd7365..0930f988ac29 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -31,22 +31,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
return sdk7780_irq_tab[pin-1][slot];
}
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- /* Enable all interrupts, so we know what to fix */
- pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
-
- /* Set up standard PCI config registers */
- pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
- pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
- pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
-
- pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
- pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
-
- pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
- pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
index 475fa9f0fe2c..a4c7d3a4efca 100644
--- a/arch/sh/drivers/pci/fixups-se7751.c
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -97,12 +97,12 @@ int pci_fixup_pcic(struct pci_channel *chan)
* meaning all calls go straight through... use BUG_ON to
* catch erroneous assumption.
*/
- BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+ BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
- PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+ PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
/* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+ PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
/* All done, may as well say so... */
printk("SH7751 PCI: Finished initialization of the PCI controller\n");
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 78bebebdc99c..0b81999fb88b 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -16,7 +16,7 @@
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) \
- (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
static DEFINE_SPINLOCK(sh4_pci_lock);
@@ -102,34 +102,6 @@ struct pci_ops sh4_pci_ops = {
.write = sh4_pci_write,
};
-/*
- * Not really related to pci_ops, but it's common and not worth shoving
- * somewhere else for now..
- */
-int __init sh4_pci_check_direct(struct pci_channel *chan)
-{
- /*
- * Check if configuration works.
- */
- unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
-
- pci_write_reg(chan, P1SEG, SH4_PCIPAR);
-
- if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
- pci_write_reg(chan, tmp, SH4_PCIPAR);
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- request_region(chan->reg_base + SH4_PCIPAR, 8,
- "PCI conf1");
- return 0;
- }
-
- pci_write_reg(chan, tmp, SH4_PCIPAR);
-
- printk(KERN_ERR "PCI: %s failed\n", __func__);
-
- return -EINVAL;
-}
-
int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
{
/* Nothing to do. */
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
index 210f9d4af141..633694193af8 100644
--- a/arch/sh/drivers/pci/pci-dreamcast.c
+++ b/arch/sh/drivers/pci/pci-dreamcast.c
@@ -25,25 +25,25 @@
#include <asm/irq.h>
#include <mach/pci.h>
-static struct resource gapspci_io_resource = {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource gapspci_mem_resource = {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
+static struct resource gapspci_resources[] = {
+ {
+ .name = "GAPSPCI IO",
+ .start = GAPSPCI_BBA_CONFIG,
+ .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "GAPSPCI mem",
+ .start = GAPSPCI_DMA_BASE,
+ .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct pci_channel dreamcast_pci_controller = {
.pci_ops = &gapspci_pci_ops,
- .io_resource = &gapspci_io_resource,
+ .resources = gapspci_resources,
+ .nr_resources = ARRAY_SIZE(gapspci_resources),
.io_offset = 0x00000000,
- .mem_resource = &gapspci_mem_resource,
.mem_offset = 0x00000000,
};
@@ -95,8 +95,6 @@ static int __init gapspci_init(void)
outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
- register_pci_controller(&dreamcast_pci_controller);
-
- return 0;
+ return register_pci_controller(&dreamcast_pci_controller);
}
arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 3d5296cde622..cbf763b3015e 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -49,6 +49,17 @@
#define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
#define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
+ #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
+ #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
+ #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
+ #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
+ #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
+ #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
+ #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
+ #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
+ #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
+ #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
+ #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
#define SH4_PCIALR 0x11C /* Error Address Register */
#define SH4_PCICLR 0x120 /* Error Command/Data */
#define SH4_PCICLR_MPIO 0x80000000
@@ -61,7 +72,7 @@
#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
#define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
#define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
+ #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */
#define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
#define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
#define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
@@ -151,7 +162,6 @@
/* arch/sh/kernel/drivers/pci/ops-sh4.c */
extern struct pci_ops sh4_pci_ops;
-int sh4_pci_check_direct(struct pci_channel *chan);
int pci_fixup_pcic(struct pci_channel *chan);
struct sh4_pci_address_space {
@@ -167,13 +177,13 @@ struct sh4_pci_address_map {
static inline void pci_write_reg(struct pci_channel *chan,
unsigned long val, unsigned long reg)
{
- ctrl_outl(val, chan->reg_base + reg);
+ __raw_writel(val, chan->reg_base + reg);
}
static inline unsigned long pci_read_reg(struct pci_channel *chan,
unsigned long reg)
{
- return ctrl_inl(chan->reg_base + reg);
+ return __raw_readl(chan->reg_base + reg);
}
#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 873ed2b44055..0bf296c78795 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -89,14 +89,13 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
return IRQ_NONE;
}
-static struct resource sh5_io_resource = { /* place holder */ };
-static struct resource sh5_mem_resource = { /* place holder */ };
+static struct resource sh5_pci_resources[2];
static struct pci_channel sh5pci_controller = {
.pci_ops = &sh5_pci_ops,
- .mem_resource = &sh5_mem_resource,
+ .resources = sh5_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh5_pci_resources),
.mem_offset = 0x00000000,
- .io_resource = &sh5_io_resource,
.io_offset = 0x00000000,
};
@@ -210,14 +209,12 @@ static int __init sh5pci_init(void)
SH5PCI_WRITE(AINTM, ~0);
SH5PCI_WRITE(PINTM, ~0);
- sh5_io_resource.start = PCI_IO_AREA;
- sh5_io_resource.end = PCI_IO_AREA + 0x10000;
+ sh5_pci_resources[0].start = PCI_IO_AREA;
+ sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
- sh5_mem_resource.start = memStart;
- sh5_mem_resource.end = memStart + memSize;
+ sh5_pci_resources[1].start = memStart;
+ sh5_pci_resources[1].end = memStart + memSize;
- register_pci_controller(&sh5pci_controller);
-
- return 0;
+ return register_pci_controller(&sh5pci_controller);
}
arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
index f277628221f3..3f01decb4307 100644
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -86,14 +86,14 @@ extern unsigned long pcicr_virt;
/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
/* Write I/O functions */
-#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
/* Read I/O functions */
-#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg))
/* Set PCI config bits */
#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 70c1999a0ec4..17811e5d287b 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -44,25 +44,25 @@ static int __init __area_sdram_check(struct pci_channel *chan,
return 1;
}
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
+static struct resource sh7751_pci_resources[] = {
+ {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+ }, {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+ },
};
static struct pci_channel sh7751_pci_controller = {
.pci_ops = &sh4_pci_ops,
- .mem_resource = &sh7751_mem_resource,
+ .resources = sh7751_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh7751_pci_resources),
.mem_offset = 0x00000000,
- .io_resource = &sh7751_io_resource,
.io_offset = 0x00000000,
.io_map_base = SH7751_PCI_IO_BASE,
};
@@ -79,7 +79,6 @@ static int __init sh7751_pci_init(void)
struct pci_channel *chan = &sh7751_pci_controller;
unsigned int id;
u32 word, reg;
- int ret;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
@@ -93,13 +92,10 @@ static int __init sh7751_pci_init(void)
return -ENODEV;
}
- if ((ret = sh4_pci_check_direct(chan)) != 0)
- return ret;
-
/* Set the BCR's to enable PCI access */
- reg = ctrl_inl(SH7751_BCR1);
+ reg = __raw_readl(SH7751_BCR1);
reg |= 0x80000;
- ctrl_outl(reg, SH7751_BCR1);
+ __raw_writel(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(chan, 0, SH4_PCICLKR);
@@ -132,13 +128,13 @@ static int __init sh7751_pci_init(void)
/* Set the local 16MB PCI memory space window to
* the lowest PCI mapped address
*/
- word = chan->mem_resource->start & SH4_PCIMBR_MASK;
+ word = chan->resources[1].start & SH4_PCIMBR_MASK;
pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
pci_write_reg(chan, word , SH4_PCIMBR);
/* Make sure the MSB's of IO window are set to access PCI space
* correctly */
- word = chan->io_resource->start & SH4_PCIIOBR_MASK;
+ word = chan->resources[0].start & SH4_PCIIOBR_MASK;
pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
pci_write_reg(chan, word, SH4_PCIIOBR);
@@ -159,13 +155,13 @@ static int __init sh7751_pci_init(void)
return -1;
/* configure the wait control registers */
- word = ctrl_inl(SH7751_WCR1);
+ word = __raw_readl(SH7751_WCR1);
pci_write_reg(chan, word, SH4_PCIWCR1);
- word = ctrl_inl(SH7751_WCR2);
+ word = __raw_readl(SH7751_WCR2);
pci_write_reg(chan, word, SH4_PCIWCR2);
- word = ctrl_inl(SH7751_WCR3);
+ word = __raw_readl(SH7751_WCR3);
pci_write_reg(chan, word, SH4_PCIWCR3);
- word = ctrl_inl(SH7751_MCR);
+ word = __raw_readl(SH7751_MCR);
pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
@@ -180,8 +176,6 @@ static int __init sh7751_pci_init(void)
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
pci_write_reg(chan, word, SH4_PCICR);
- register_pci_controller(chan);
-
- return 0;
+ return register_pci_controller(chan);
}
arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 323b92d565fe..ffdcbf10b95e 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,7 +1,7 @@
/*
* Low-Level PCI Support for the SH7780
*
- * Copyright (C) 2005 - 2009 Paul Mundt
+ * Copyright (C) 2005 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -11,52 +11,240 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/log2.h>
#include "pci-sh4.h"
+#include <asm/mmu.h>
+#include <asm/sizes.h>
-static struct resource sh7785_io_resource = {
- .name = "SH7785_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
- .name = "SH7785_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
+static struct resource sh7785_pci_resources[] = {
+ {
+ .name = "PCI IO",
+ .start = 0x1000,
+ .end = SZ_4M - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "PCI MEM 0",
+ .start = 0xfd000000,
+ .end = 0xfd000000 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "PCI MEM 1",
+ .start = 0x10000000,
+ .end = 0x10000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /*
+ * 32-bit only resources must be last.
+ */
+ .name = "PCI MEM 2",
+ .start = 0xc0000000,
+ .end = 0xc0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ },
};
static struct pci_channel sh7780_pci_controller = {
.pci_ops = &sh4_pci_ops,
- .mem_resource = &sh7785_mem_resource,
- .mem_offset = 0x00000000,
- .io_resource = &sh7785_io_resource,
- .io_offset = 0x00000000,
- .io_map_base = SH7780_PCI_IO_BASE,
+ .resources = sh7785_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh7785_pci_resources),
+ .io_offset = 0,
+ .mem_offset = 0,
+ .io_map_base = 0xfe200000,
+ .serr_irq = evt2irq(0xa00),
+ .err_irq = evt2irq(0xaa0),
};
-static struct sh4_pci_address_map sh7780_pci_map = {
- .window0 = {
-#if defined(CONFIG_32BIT)
- .base = SH7780_32BIT_DDR_BASE_ADDR,
- .size = 0x40000000,
-#else
- .base = SH7780_CS0_BASE_ADDR,
- .size = 0x20000000,
-#endif
- },
+struct pci_errors {
+ unsigned int mask;
+ const char *str;
+} pci_arbiter_errors[] = {
+ { SH4_PCIAINT_MBKN, "master broken" },
+ { SH4_PCIAINT_TBTO, "target bus time out" },
+ { SH4_PCIAINT_MBTO, "master bus time out" },
+ { SH4_PCIAINT_TABT, "target abort" },
+ { SH4_PCIAINT_MABT, "master abort" },
+ { SH4_PCIAINT_RDPE, "read data parity error" },
+ { SH4_PCIAINT_WDPE, "write data parity error" },
+}, pci_interrupt_errors[] = {
+ { SH4_PCIINT_MLCK, "master lock error" },
+ { SH4_PCIINT_TABT, "target-target abort" },
+ { SH4_PCIINT_TRET, "target retry time out" },
+ { SH4_PCIINT_MFDE, "master function disable erorr" },
+ { SH4_PCIINT_PRTY, "address parity error" },
+ { SH4_PCIINT_SERR, "SERR" },
+ { SH4_PCIINT_TWDP, "data parity error for target write" },
+ { SH4_PCIINT_TRDP, "PERR detected for target read" },
+ { SH4_PCIINT_MTABT, "target abort for master" },
+ { SH4_PCIINT_MMABT, "master abort for master" },
+ { SH4_PCIINT_MWPD, "master write data parity error" },
+ { SH4_PCIINT_MRPD, "master read data parity error" },
};
+static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
+{
+ struct pci_channel *hose = dev_id;
+ unsigned long addr;
+ unsigned int status;
+ unsigned int cmd;
+ int i;
+
+ addr = __raw_readl(hose->reg_base + SH4_PCIALR);
+
+ /*
+ * Handle status errors.
+ */
+ status = __raw_readw(hose->reg_base + PCI_STATUS);
+ if (status & (PCI_STATUS_PARITY |
+ PCI_STATUS_DETECTED_PARITY |
+ PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT |
+ PCI_STATUS_REC_MASTER_ABORT)) {
+ cmd = pcibios_handle_status_errors(addr, status, hose);
+ if (likely(cmd))
+ __raw_writew(cmd, hose->reg_base + PCI_STATUS);
+ }
+
+ /*
+ * Handle arbiter errors.
+ */
+ status = __raw_readl(hose->reg_base + SH4_PCIAINT);
+ for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
+ if (status & pci_arbiter_errors[i].mask) {
+ printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+ pci_arbiter_errors[i].str, addr);
+ cmd |= pci_arbiter_errors[i].mask;
+ }
+ }
+ __raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
+
+ /*
+ * Handle the remaining PCI errors.
+ */
+ status = __raw_readl(hose->reg_base + SH4_PCIINT);
+ for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
+ if (status & pci_interrupt_errors[i].mask) {
+ printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+ pci_interrupt_errors[i].str, addr);
+ cmd |= pci_interrupt_errors[i].mask;
+ }
+ }
+ __raw_writel(cmd, hose->reg_base + SH4_PCIINT);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
+{
+ struct pci_channel *hose = dev_id;
+
+ printk(KERN_DEBUG "PCI: system error received: ");
+ pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
+ printk("\n");
+
+ /* Deassert SERR */
+ __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
+
+ /* Back off the IRQ for awhile */
+ disable_irq_nosync(irq);
+ hose->serr_timer.expires = jiffies + HZ;
+ add_timer(&hose->serr_timer);
+
+ return IRQ_HANDLED;
+}
+
+static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
+{
+ int ret;
+
+ /* Clear out PCI arbiter IRQs */
+ __raw_writel(0, hose->reg_base + SH4_PCIAINT);
+
+ /* Clear all error conditions */
+ __raw_writew(PCI_STATUS_DETECTED_PARITY | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_SIG_TARGET_ABORT | \
+ PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
+
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ "PCI SERR interrupt", hose);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
+ return ret;
+ }
+
+ /*
+ * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
+ * down IRQ vectors are routed through the ERR IRQ vector. We
+ * only request_irq() once as there is only a single masking
+ * source for multiple events.
+ */
+ ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
+ "PCI ERR interrupt", hose);
+ if (unlikely(ret)) {
+ free_irq(hose->serr_irq, hose);
+ return ret;
+ }
+
+ /* Unmask all of the arbiter IRQs. */
+ __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
+ SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
+ SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
+
+ /* Unmask all of the PCI IRQs */
+ __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
+ SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
+ SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
+ SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
+ SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
+ SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
+
+ return ret;
+}
+
+static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
+{
+ free_irq(hose->err_irq, hose);
+ free_irq(hose->serr_irq, hose);
+}
+
+static void __init sh7780_pci66_init(struct pci_channel *hose)
+{
+ unsigned int tmp;
+
+ if (!pci_is_66mhz_capable(hose, 0, 0))
+ return;
+
+ /* Enable register access */
+ tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+ tmp |= SH4_PCICR_PREFIX;
+ __raw_writel(tmp, hose->reg_base + SH4_PCICR);
+
+ /* Enable 66MHz operation */
+ tmp = __raw_readw(hose->reg_base + PCI_STATUS);
+ tmp |= PCI_STATUS_66MHZ;
+ __raw_writew(tmp, hose->reg_base + PCI_STATUS);
+
+ /* Done */
+ tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+ tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
+ __raw_writel(tmp, hose->reg_base + SH4_PCICR);
+}
+
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
+ phys_addr_t memphys;
+ size_t memsize;
unsigned int id;
- const char *type = NULL;
- int ret;
- u32 word;
+ const char *type;
+ int ret, i;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
@@ -65,17 +253,28 @@ static int __init sh7780_pci_init(void)
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
- id = __raw_readw(chan->reg_base + SH7780_PCIVID);
- if (id != SH7780_VENDOR_ID) {
+ /* Reset */
+ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST,
+ chan->reg_base + SH4_PCICR);
+
+ /*
+ * Wait for it to come back up. The spec says to allow for up to
+ * 1 second after toggling the reset pin, but in practice 100ms
+ * is more than enough.
+ */
+ mdelay(100);
+
+ id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
+ if (id != PCI_VENDOR_ID_RENESAS) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
- id = __raw_readw(chan->reg_base + SH7780_PCIDID);
- type = (id == SH7763_DEVICE_ID) ? "SH7763" :
- (id == SH7780_DEVICE_ID) ? "SH7780" :
- (id == SH7781_DEVICE_ID) ? "SH7781" :
- (id == SH7785_DEVICE_ID) ? "SH7785" :
+ id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
+ type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
@@ -85,62 +284,119 @@ static int __init sh7780_pci_init(void)
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
- __raw_readb(chan->reg_base + SH7780_PCIRID));
+ __raw_readb(chan->reg_base + PCI_REVISION_ID));
- if ((ret = sh4_pci_check_direct(chan)) != 0)
+ /*
+ * Now throw it in to register initialization mode and
+ * start the real work.
+ */
+ __raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR);
+
+ memphys = __pa(memory_start);
+ memsize = roundup_pow_of_two(memory_end - memory_start);
+
+ /*
+ * If there's more than 512MB of memory, we need to roll over to
+ * LAR1/LSR1.
+ */
+ if (memsize > SZ_512M) {
+ __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
+ __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
+ chan->reg_base + SH4_PCILSR1);
+ memsize = SZ_512M;
+ } else {
+ /*
+ * Otherwise just zero it out and disable it.
+ */
+ __raw_writel(0, chan->reg_base + SH4_PCILAR1);
+ __raw_writel(0, chan->reg_base + SH4_PCILSR1);
+ }
+
+ /*
+ * LAR0/LSR0 covers up to the first 512MB, which is enough to
+ * cover all of lowmem on most platforms.
+ */
+ __raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
+ __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
+ chan->reg_base + SH4_PCILSR0);
+
+ /*
+ * Hook up the ERR and SERR IRQs.
+ */
+ ret = sh7780_pci_setup_irqs(chan);
+ if (unlikely(ret))
return ret;
/*
- * Set the class and sub-class codes.
+ * Disable the cache snoop controller for non-coherent DMA.
*/
- __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
- chan->reg_base + SH7780_PCIBCC);
- __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
- chan->reg_base + SH7780_PCISUB);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
/*
- * Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
+ * Setup the memory BARs
*/
- pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
- /* Set the values on window 0 PCI config registers */
- pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
- pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
+ for (i = 1; i < chan->nr_resources; i++) {
+ struct resource *res = chan->resources + i;
+ resource_size_t size;
- pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+ if (unlikely(res->flags & IORESOURCE_IO))
+ continue;
- /* Set up standard PCI config registers */
- __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
- __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
- __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
- __raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+ /*
+ * Make sure we're in the right physical addressing mode
+ * for dealing with the resource.
+ */
+ if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
+ chan->nr_resources--;
+ continue;
+ }
- __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
+ size = resource_size(res);
+
+ /*
+ * The MBMR mask is calculated in units of 256kB, which
+ * keeps things pretty simple.
+ */
+ __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+ chan->reg_base + SH7780_PCIMBMR(i - 1));
+ __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
+ }
- /* Apply any last-minute PCIC fixups */
- pci_fixup_pcic(chan);
+ /*
+ * And I/O.
+ */
+ __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
+ __raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
+ __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
- pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+ __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
+ PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
+ PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
-#ifdef CONFIG_32BIT
- pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
+ /*
+ * Initialization mode complete, release the control register and
+ * enable round robin mode to stop device overruns/starvation.
+ */
+ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO,
+ chan->reg_base + SH4_PCICR);
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
- SH7780_PCIIOBR);
- pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
- SH7780_PCIIOBMR);
+ ret = register_pci_controller(chan);
+ if (unlikely(ret))
+ goto err;
- /* SH7780 init done, set central function init complete */
- /* use round robin mode to stop a device starving/overruning */
- word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
- pci_write_reg(chan, word, SH4_PCICR);
+ sh7780_pci66_init(chan);
- register_pci_controller(chan);
+ printk(KERN_NOTICE "PCI: Running at %dMHz.\n",
+ (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ?
+ 66 : 33);
return 0;
+
+err:
+ sh7780_pci_teardown_irqs(chan);
+ return ret;
}
arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 4a52478c97cf..205dcbefe275 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -12,12 +12,11 @@
#ifndef _PCI_SH7780_H_
#define _PCI_SH7780_H_
-/* Platform Specific Values */
-#define SH7780_VENDOR_ID 0x1912
-#define SH7781_DEVICE_ID 0x0001
-#define SH7780_DEVICE_ID 0x0002
-#define SH7763_DEVICE_ID 0x0004
-#define SH7785_DEVICE_ID 0x0007
+#define PCI_VENDOR_ID_RENESAS 0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781 0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780 0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763 0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007
/* SH7780 Control Registers */
#define PCIECR 0xFE000008
@@ -27,44 +26,9 @@
#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
-#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
-#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-
-#define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */
-#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
-
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
/* SH7780 PCI Config Registers */
-#define SH7780_PCIVID 0x000 /* Vendor ID */
-#define SH7780_PCIDID 0x002 /* Device ID */
-#define SH7780_PCICMD 0x004 /* Command */
-#define SH7780_PCISTATUS 0x006 /* Status */
-#define SH7780_PCIRID 0x008 /* Revision ID */
-#define SH7780_PCIPIF 0x009 /* Program Interface */
-#define SH7780_PCISUB 0x00a /* Sub class code */
-#define SH7780_PCIBCC 0x00b /* Base class code */
-#define SH7780_PCICLS 0x00c /* Cache line size */
-#define SH7780_PCILTM 0x00d /* latency timer */
-#define SH7780_PCIHDR 0x00e /* Header type */
-#define SH7780_PCIBIST 0x00f /* BIST */
-#define SH7780_PCIIBAR 0x010 /* IO Base address */
-#define SH7780_PCIMBAR0 0x014 /* Memory base address0 */
-#define SH7780_PCIMBAR1 0x018 /* Memory base address1 */
-#define SH7780_PCISVID 0x02c /* Sub system vendor ID */
-#define SH7780_PCISID 0x02e /* Sub system ID */
-#define SH7780_PCICP 0x034
-#define SH7780_PCIINTLINE 0x03c /* Interrupt line */
-#define SH7780_PCIINTPIN 0x03d /* Interrupt pin */
-#define SH7780_PCIMINGNT 0x03e /* Minumum grand */
-#define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */
-#define SH7780_PCICID 0x040
-#define SH7780_PCINIP 0x041
-#define SH7780_PCIPMC 0x042
-#define SH7780_PCIPMCSR 0x044
-#define SH7780_PCIPMCSR_BSE 0x046
-#define SH7780_PCICDD 0x047
-
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
@@ -76,10 +40,8 @@
#define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
#define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH7780_PCIMBR0 0x1E0
-#define SH7780_PCIMBMR0 0x1E4
-#define SH7780_PCIMBR2 0x1F0
-#define SH7780_PCIMBMR2 0x1F4
+#define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8))
+#define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8))
#define SH7780_PCIIOBR 0x1F8
#define SH7780_PCIIOBMR 0x1FC
#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
@@ -87,16 +49,4 @@
#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
-/* General Memory Config Addresses */
-#define SH7780_CS0_BASE_ADDR 0x0
-#define SH7780_MEM_REGION_SIZE 0x04000000
-#define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-
-#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
-
#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index c481df639022..953af139e230 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -33,15 +33,22 @@ static int pci_initialized;
static void __devinit pcibios_scanbus(struct pci_channel *hose)
{
static int next_busno;
+ static int need_domain_info;
struct pci_bus *bus;
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || hose->index;
+ hose->need_domain_info = need_domain_info;
if (bus) {
next_busno = bus->subordinate + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
- if (next_busno > 224)
+ if (next_busno > 224) {
next_busno = 0;
+ need_domain_info = 1;
+ }
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
@@ -51,10 +58,21 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose)
static DEFINE_MUTEX(pci_scan_mutex);
-void __devinit register_pci_controller(struct pci_channel *hose)
+int __devinit register_pci_controller(struct pci_channel *hose)
{
- request_resource(&iomem_resource, hose->mem_resource);
- request_resource(&ioport_resource, hose->io_resource);
+ int i;
+
+ for (i = 0; i < hose->nr_resources; i++) {
+ struct resource *res = hose->resources + i;
+
+ if (res->flags & IORESOURCE_IO) {
+ if (request_resource(&ioport_resource, res) < 0)
+ goto out;
+ } else {
+ if (request_resource(&iomem_resource, res) < 0)
+ goto out;
+ }
+ }
*hose_tail = hose;
hose_tail = &hose->next;
@@ -68,6 +86,11 @@ void __devinit register_pci_controller(struct pci_channel *hose)
}
/*
+ * Setup the ERR/PERR and SERR timers, if available.
+ */
+ pcibios_enable_timers(hose);
+
+ /*
* Scan the bus if it is register after the PCI subsystem
* initialization.
*/
@@ -76,6 +99,15 @@ void __devinit register_pci_controller(struct pci_channel *hose)
pcibios_scanbus(hose);
mutex_unlock(&pci_scan_mutex);
}
+
+ return 0;
+
+out:
+ for (--i; i >= 0; i--)
+ release_resource(&hose->resources[i]);
+
+ printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n");
+ return -1;
}
static int __init pcibios_init(void)
@@ -127,11 +159,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev = bus->self;
struct list_head *ln;
- struct pci_channel *chan = bus->sysdata;
+ struct pci_channel *hose = bus->sysdata;
if (!dev) {
- bus->resource[0] = chan->io_resource;
- bus->resource[1] = chan->mem_resource;
+ int i;
+
+ for (i = 0; i < hose->nr_resources; i++)
+ bus->resource[i] = hose->resources + i;
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
@@ -148,34 +182,29 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
* addresses to be allocated in the 0x000-0x0ff region
* modulo 0x400.
*/
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
- struct pci_channel *chan = dev->sysdata;
+ struct pci_channel *hose = dev->sysdata;
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
- start = PCIBIOS_MIN_IO + chan->io_resource->start;
+ if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
+ start = PCIBIOS_MIN_IO + hose->resources[0].start;
/*
* Put everything into 0x00-0xff region modulo 0x400.
*/
- if (start & 0x300) {
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- } else if (res->flags & IORESOURCE_MEM) {
- if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
- start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
}
- res->start = start;
+ return start;
}
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
- struct resource *res)
+ struct resource *res)
{
struct pci_channel *hose = dev->sysdata;
unsigned long offset = 0;
@@ -189,9 +218,8 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
region->end = res->end - offset;
}
-void __devinit
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
- struct pci_bus_region *region)
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
{
struct pci_channel *hose = dev->sysdata;
unsigned long offset = 0;
@@ -274,6 +302,86 @@ char * __devinit pcibios_setup(char *str)
return str;
}
+static void __init
+pcibios_bus_report_status_early(struct pci_channel *hose,
+ int top_bus, int current_bus,
+ unsigned int status_mask, int warn)
+{
+ unsigned int pci_devfn;
+ u16 status;
+ int ret;
+
+ for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+ if (PCI_FUNC(pci_devfn))
+ continue;
+ ret = early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS, &status);
+ if (ret != PCIBIOS_SUCCESSFUL)
+ continue;
+ if (status == 0xffff)
+ continue;
+
+ early_write_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS,
+ status & status_mask);
+ if (warn)
+ printk("(%02x:%02x: %04X) ", current_bus,
+ pci_devfn, status);
+ }
+}
+
+/*
+ * We can't use pci_find_device() here since we are
+ * called from interrupt context.
+ */
+static void __init_refok
+pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
+ int warn)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 status;
+
+ /*
+ * ignore host bridge - we handle
+ * that separately
+ */
+ if (dev->bus->number == 0 && dev->devfn == 0)
+ continue;
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+ if (status == 0xffff)
+ continue;
+
+ if ((status & status_mask) == 0)
+ continue;
+
+ /* clear the status errors */
+ pci_write_config_word(dev, PCI_STATUS, status & status_mask);
+
+ if (warn)
+ printk("(%s: %04X) ", pci_name(dev), status);
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (dev->subordinate)
+ pcibios_bus_report_status(dev->subordinate, status_mask, warn);
+}
+
+void __init_refok pcibios_report_status(unsigned int status_mask, int warn)
+{
+ struct pci_channel *hose;
+
+ for (hose = hose_head; hose; hose = hose->next) {
+ if (unlikely(!hose->bus))
+ pcibios_bus_report_status_early(hose, hose_head->index,
+ hose->index, status_mask, warn);
+ else
+ pcibios_bus_report_status(hose->bus, status_mask, warn);
+ }
+}
+
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
@@ -302,9 +410,15 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev,
{
struct pci_channel *chan = dev->sysdata;
- if (!chan->io_map_base)
+ if (unlikely(!chan->io_map_base)) {
chan->io_map_base = generic_io_base;
+ if (pci_domains_supported)
+ panic("To avoid data corruption io_map_base MUST be "
+ "set with multiple PCI domains.");
+ }
+
+
return (void __iomem *)(chan->io_map_base + port);
}
@@ -321,20 +435,9 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
if (flags & IORESOURCE_IO)
return ioport_map_pci(dev, start, len);
-
- /*
- * Presently the IORESOURCE_MEM case is a bit special, most
- * SH7751 style PCI controllers have PCI memory at a fixed
- * location in the address space where no remapping is desired.
- * With the IORESOURCE_MEM case more care has to be taken
- * to inhibit page table mapping for legacy cores, but this is
- * punted off to __ioremap().
- * -- PFM.
- */
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
return ioremap(start, len);
-
return ioremap_nocache(start, len);
}
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index ac37ee879bab..ae91a2dd9183 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -1,7 +1,7 @@
/*
* Low-Level PCI Express Support for the SH7786
*
- * Copyright (C) 2009 Paul Mundt
+ * Copyright (C) 2009 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -30,60 +30,84 @@ static struct sh7786_pcie_hwops {
int (*port_init_hw)(struct sh7786_pcie_port *port);
} *sh7786_pcie_hwops;
-static struct resource sh7786_pci_32bit_mem_resources[] = {
+static struct resource sh7786_pci0_resources[] = {
{
- .name = "pci0_mem",
- .start = SH4A_PCIMEM_BASEA,
- .end = SH4A_PCIMEM_BASEA + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+ .name = "PCIe0 IO",
+ .start = 0xfd000000,
+ .end = 0xfd000000 + SZ_8M - 1,
+ .flags = IORESOURCE_IO,
}, {
- .name = "pci1_mem",
- .start = SH4A_PCIMEM_BASEA1,
- .end = SH4A_PCIMEM_BASEA1 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+ .name = "PCIe0 MEM 0",
+ .start = 0xc0000000,
+ .end = 0xc0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "pci2_mem",
- .start = SH4A_PCIMEM_BASEA2,
- .end = SH4A_PCIMEM_BASEA2 + SZ_64M - 1,
+ .name = "PCIe0 MEM 1",
+ .start = 0x10000000,
+ .end = 0x10000000 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .name = "PCIe0 MEM 2",
+ .start = 0xfe100000,
+ .end = 0xfe100000 + SZ_1M - 1,
},
};
-static struct resource sh7786_pci_29bit_mem_resource = {
- .start = SH4A_PCIMEM_BASE,
- .end = SH4A_PCIMEM_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
+static struct resource sh7786_pci1_resources[] = {
+ {
+ .name = "PCIe1 IO",
+ .start = 0xfd800000,
+ .end = 0xfd800000 + SZ_8M - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "PCIe1 MEM 0",
+ .start = 0xa0000000,
+ .end = 0xa0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe1 MEM 1",
+ .start = 0x30000000,
+ .end = 0x30000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe1 MEM 2",
+ .start = 0xfe300000,
+ .end = 0xfe300000 + SZ_1M - 1,
+ },
};
-static struct resource sh7786_pci_io_resources[] = {
+static struct resource sh7786_pci2_resources[] = {
{
- .name = "pci0_io",
- .start = SH4A_PCIIO_BASE,
- .end = SH4A_PCIIO_BASE + SZ_8M - 1,
- .flags = IORESOURCE_IO,
+ .name = "PCIe2 IO",
+ .start = 0xfc800000,
+ .end = 0xfc800000 + SZ_4M - 1,
}, {
- .name = "pci1_io",
- .start = SH4A_PCIIO_BASE1,
- .end = SH4A_PCIIO_BASE1 + SZ_8M - 1,
- .flags = IORESOURCE_IO,
+ .name = "PCIe2 MEM 0",
+ .start = 0x80000000,
+ .end = 0x80000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "pci2_io",
- .start = SH4A_PCIIO_BASE2,
- .end = SH4A_PCIIO_BASE2 + SZ_4M - 1,
- .flags = IORESOURCE_IO,
+ .name = "PCIe2 MEM 1",
+ .start = 0x20000000,
+ .end = 0x20000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+ .name = "PCIe2 MEM 2",
+ .start = 0xfcd00000,
+ .end = 0xfcd00000 + SZ_1M - 1,
},
};
extern struct pci_ops sh7786_pci_ops;
-#define DEFINE_CONTROLLER(start, idx) \
-{ \
- .pci_ops = &sh7786_pci_ops, \
- .reg_base = start, \
- /* mem_resource filled in at probe time */ \
- .mem_offset = 0, \
- .io_resource = &sh7786_pci_io_resources[idx], \
- .io_offset = 0, \
+#define DEFINE_CONTROLLER(start, idx) \
+{ \
+ .pci_ops = &sh7786_pci_ops, \
+ .resources = sh7786_pci##idx##_resources, \
+ .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
+ .reg_base = start, \
+ .mem_offset = 0, \
+ .io_offset = 0, \
}
static struct pci_channel sh7786_pci_channels[] = {
@@ -180,7 +204,9 @@ static int pcie_init(struct sh7786_pcie_port *port)
{
struct pci_channel *chan = port->hose;
unsigned int data;
- int ret;
+ phys_addr_t memphys;
+ size_t memsize;
+ int ret, i;
/* Begin initialization */
pci_write_reg(chan, 0, SH4A_PCIETCTLR);
@@ -203,15 +229,24 @@ static int pcie_init(struct sh7786_pcie_port *port)
data |= PCI_CAP_ID_EXP;
pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
- /* Enable x4 link width and extended sync. */
+ /* Enable data link layer active state reporting */
+ pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
+
+ /* Enable extended sync and ASPM L0s support */
data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
- data &= ~(PCI_EXP_LNKSTA_NLW << 16);
- data |= (1 << 22) | PCI_EXP_LNKCTL_ES;
+ data &= ~PCI_EXP_LNKCTL_ASPMC;
+ data |= PCI_EXP_LNKCTL_ES | 1;
pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
+ /* Write out the physical slot number */
+ data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
+ data &= ~PCI_EXP_SLTCAP_PSN;
+ data |= (port->index + 1) << 19;
+ pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
+
/* Set the completion timer timeout to the maximum 32ms. */
data = pci_read_reg(chan, SH4A_PCIETLCTLR);
- data &= ~0xffff;
+ data &= ~0x3f00;
data |= 0x32 << 8;
pci_write_reg(chan, data, SH4A_PCIETLCTLR);
@@ -224,6 +259,33 @@ static int pcie_init(struct sh7786_pcie_port *port)
data |= (0xff << 16);
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
+ memphys = __pa(memory_start);
+ memsize = roundup_pow_of_two(memory_end - memory_start);
+
+ /*
+ * If there's more than 512MB of memory, we need to roll over to
+ * LAR1/LAMR1.
+ */
+ if (memsize > SZ_512M) {
+ __raw_writel(memphys + SZ_512M, chan->reg_base + SH4A_PCIELAR1);
+ __raw_writel(((memsize - SZ_512M) - SZ_256) | 1,
+ chan->reg_base + SH4A_PCIELAMR1);
+ memsize = SZ_512M;
+ } else {
+ /*
+ * Otherwise just zero it out and disable it.
+ */
+ __raw_writel(0, chan->reg_base + SH4A_PCIELAR1);
+ __raw_writel(0, chan->reg_base + SH4A_PCIELAMR1);
+ }
+
+ /*
+ * LAR0/LAMR0 covers up to the first 512MB, which is enough to
+ * cover all of lowmem on most platforms.
+ */
+ __raw_writel(memphys, chan->reg_base + SH4A_PCIELAR0);
+ __raw_writel((memsize - SZ_256) | 1, chan->reg_base + SH4A_PCIELAMR0);
+
/* Finish initialization */
data = pci_read_reg(chan, SH4A_PCIETCTLR);
data |= 0x1;
@@ -243,10 +305,14 @@ static int pcie_init(struct sh7786_pcie_port *port)
if (unlikely(ret != 0))
return -ENODEV;
- pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1);
+ data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
+ data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
+ data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
+ pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
+
pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
- pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2);
wmb();
@@ -254,15 +320,32 @@ static int pcie_init(struct sh7786_pcie_port *port)
printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n",
port->index, (data >> 20) & 0x3f);
- pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0);
- pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0);
- pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2);
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2);
- pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2);
+ for (i = 0; i < chan->nr_resources; i++) {
+ struct resource *res = chan->resources + i;
+ resource_size_t size;
+ u32 enable_mask;
+
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(i));
+
+ size = resource_size(res);
+
+ /*
+ * The PAMR mask is calculated in units of 256kB, which
+ * keeps things pretty simple.
+ */
+ __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+ chan->reg_base + SH4A_PCIEPAMR(i));
+
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH(i));
+ pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL(i));
+
+ enable_mask = MASK_PARE;
+ if (res->flags & IORESOURCE_IO)
+ enable_mask |= MASK_SPC;
+
+ pci_write_reg(chan, enable_mask, SH4A_PCIEPTCTLR(i));
+ }
return 0;
}
@@ -296,9 +379,7 @@ static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
if (unlikely(ret < 0))
return ret;
- register_pci_controller(port->hose);
-
- return 0;
+ return register_pci_controller(port->hose);
}
static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
@@ -332,17 +413,7 @@ static int __init sh7786_pcie_init(void)
port->index = i;
port->hose = sh7786_pci_channels + i;
- port->hose->io_map_base = port->hose->io_resource->start;
-
- /*
- * Check if we are booting in 29 or 32-bit mode
- *
- * 32-bit mode provides each controller with its own
- * memory window, while 29-bit mode uses a shared one.
- */
- port->hose->mem_resource = test_mode_pin(MODE_PIN10) ?
- &sh7786_pci_32bit_mem_resources[i] :
- &sh7786_pci_29bit_mem_resource;
+ port->hose->io_map_base = port->hose->resources[0].start;
ret |= sh7786_pcie_hwops->port_init_hw(port);
}
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
index c655290a7750..90a6992576b0 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.h
+++ b/arch/sh/drivers/pci/pcie-sh7786.h
@@ -30,47 +30,9 @@
* for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
*/
-/* PCI0-0: PCI I/O space */
-#define SH4A_PCIIO_BASE 0xFD000000 /* PCI I/O for controller 0 */
-#define SH4A_PCIIO_BASE1 0xFD800000 /* PCI I/O for controller 1 (Rev1.14)*/
-#define SH4A_PCIIO_BASE2 0xFC800000 /* PCI I/O for controller 2 (Rev1.171)*/
-
-#define SH4A_PCIIO_SIZE64 0x00010000 /* PLX allows only 64K */
-#define SH4A_PCIIO_SIZE 0x00800000 /* 8M */
-#define SH4A_PCIIO_SIZE2 0x00400000 /* 4M (Rev1.171)*/
-
-/* PCI0-1: PCI memory space 29-bit address */
-#define SH4A_PCIMEM_BASE 0x10000000
-#define SH4A_PCIMEM_SIZE 0x04000000 /* 64M */
-
-/* PCI0-2: PCI memory space 32-bit address */
-#define SH4A_PCIMEM_BASEA 0xC0000000 /* for controller 0 */
-#define SH4A_PCIMEM_BASEA1 0xA0000000 /* for controller 1 (Rev1.14)*/
-#define SH4A_PCIMEM_BASEA2 0x80000000 /* for controller 2 (Rev1.171)*/
-#define SH4A_PCIMEM_SIZEA 0x20000000 /* 512M */
-
/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
#define SH4A_PCIBMSTR_TRANSLATION 0x20000000
-#define SH4A_PCI_DEVICE_ID 0x0002
-#define SH4A_PCI_VENDOR_ID 0x1912
-
-// PCI compatible 000-03f
-#define PCI_CMD 0x004
-#define PCI_RID 0x008
-#define PCI_IBAR 0x010
-#define PCI_MBAR0 0x014
-#define PCI_MBAR1 0x018
-
-/* PCI power management/MSI/capablity 040-0ff */
-/* PCIE extended 100-fff */
-
-/* SH7786 device identification */ // Rev1.171
-#define SH4A_PVR (0xFF000030)
-#define SH4A_PVR_SHX3 (0x10400000)
-#define SH4A_PRR (0xFF000044)
-#define SH4A_PRR_SH7786 (0x00000400) // Rev1.171
-
/* SPVCR0 */
#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */
#define BITS_TOP_MB (24)
@@ -350,23 +312,23 @@
#define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */
-/* PCIEPARL0 */
-#define SH4A_PCIEPARL0 (0x020400) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPARL */
+#define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
#define BITS_PAL (18)
#define MASK_PAL (0x3fff<<BITS_PAL)
-/* PCIEPARH0 */
-#define SH4A_PCIEPARH0 (0x020404) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPARH */
+#define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
#define BITS_PAH (0)
#define MASK_PAH (0xffffffff<<BITS_PAH)
-/* PCIEPAMR0 */
-#define SH4A_PCIEPAMR0 (0x020408) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPAMR */
+#define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
#define BITS_PAM (18)
#define MASK_PAM (0x3fff<<BITS_PAM)
-/* PCIEPTCTLR0 */
-#define SH4A_PCIEPTCTLR0 (0x02040C) /* R/W R/W 0x0000 0000 32 */
+/* PCIEPTCTLR */
+#define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20))
#define BITS_PARE (31)
#define MASK_PARE (0x1<<BITS_PARE)
#define BITS_TC (20)
@@ -378,26 +340,6 @@
#define BITS_SPC (8)
#define MASK_SPC (0x1<<BITS_SPC)
-#define SH4A_PCIEPARL1 (0x020420) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH1 (0x020424) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR1 (0x020428) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR1 (0x02042C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL2 (0x020440) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH2 (0x020444) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR2 (0x020448) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR2 (0x02044C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL3 (0x020460) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH3 (0x020464) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR3 (0x020468) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR3 (0x02046C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL4 (0x020480) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH4 (0x020484) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR4 (0x020488) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR4 (0x02048C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARL5 (0x0204A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPARH5 (0x0204A4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPAMR5 (0x0204A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPTCTLR5 (0x0204AC) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */
#define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
index 3b14bf860db6..6da62e9475c4 100644
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ b/arch/sh/drivers/superhyway/ops-sh4-202.c
@@ -134,8 +134,8 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
*
* Do not trust the documentation, for it is evil.
*/
- vcrh = ctrl_inl(base);
- vcrl = ctrl_inl(base + sizeof(u32));
+ vcrh = __raw_readl(base);
+ vcrl = __raw_readl(base + sizeof(u32));
tmp = ((u64)vcrh << 32) | vcrl;
memcpy(vcr, &tmp, sizeof(u64));
@@ -147,8 +147,8 @@ static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
{
u64 tmp = *(u64 *)&vcr;
- ctrl_outl((tmp >> 32) & 0xffffffff, base);
- ctrl_outl(tmp & 0xffffffff, base + sizeof(u32));
+ __raw_writel((tmp >> 32) & 0xffffffff, base);
+ __raw_writel(tmp & 0xffffffff, base + sizeof(u32));
return 0;
}
OpenPOWER on IntegriCloud