summaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers/pci/pci-sh7751.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers/pci/pci-sh7751.h')
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.h174
1 files changed, 3 insertions, 171 deletions
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 1fee5cae10d1..68e3cb5e6bec 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -3,7 +3,7 @@
*
* Dustin McIntire (dustin@sensoria.com) (c) 2001
* Paul Mundt (lethal@linux-sh.org) (c) 2003
- *
+ *
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
@@ -12,28 +12,6 @@
#ifndef _PCI_SH7751_H_
#define _PCI_SH7751_H_
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS 1
-#define PCI_PROBE_CONF1 2
-#define PCI_PROBE_CONF2 4
-#define PCI_NO_SORT 0x100
-#define PCI_BIOS_SORT 0x200
-#define PCI_NO_CHECKS 0x400
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
/* Platform Specific Values */
#define SH7751_VENDOR_ID 0x1054
#define SH7751_DEVICE_ID 0x3505
@@ -128,131 +106,6 @@
#define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */
#define SH7751_PCICONF17_PWST 0x00000003 /* Power State */
/* SH7715 Internal PCI Registers */
-#define SH7751_PCICR 0x100 /* PCI Control Register */
- #define SH7751_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
- #define SH7751_PCICR_TRSB 0x00000200 /* Target Read Single */
- #define SH7751_PCICR_BSWP 0x00000100 /* Target Byte Swap */
- #define SH7751_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
- #define SH7751_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
- #define SH7751_PCICR_MD 0x00000030 /* MD9 and MD10 status */
- #define SH7751_PCICR_SERR 0x00000008 /* SERR output assert */
- #define SH7751_PCICR_INTA 0x00000004 /* INTA output assert */
- #define SH7751_PCICR_PRST 0x00000002 /* PCI Reset Assert */
- #define SH7751_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
-#define SH7751_PCILSR0 0x104 /* PCI Local Space Register0 */
-#define SH7751_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH7751_PCILAR0 0x10C /* PCI Local Address Register1 */
-#define SH7751_PCILAR1 0x110 /* PCI Local Address Register1 */
-#define SH7751_PCIINT 0x114 /* PCI Interrupt Register */
- #define SH7751_PCIINT_MLCK 0x00008000 /* Master Lock Error */
- #define SH7751_PCIINT_TABT 0x00004000 /* Target Abort Error */
- #define SH7751_PCIINT_TRET 0x00000200 /* Target Retry Error */
- #define SH7751_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
- #define SH7751_PCIINT_PRTY 0x00000080 /* Address Parity Error */
- #define SH7751_PCIINT_SERR 0x00000040 /* SERR Detection Error */
- #define SH7751_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
- #define SH7751_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Error Det. */
- #define SH7751_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
- #define SH7751_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
- #define SH7751_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
- #define SH7751_PCIINT_MRPD 0x00000002 /* Master Read PERR Detect */
-#define SH7751_PCIINTM 0x118 /* PCI Interrupt Mask Register */
-#define SH7751_PCIALR 0x11C /* Error Address Register */
-#define SH7751_PCICLR 0x120 /* Error Command/Data Register */
- #define SH7751_PCICLR_MPIO 0x80000000 /* Error Command/Data Register */
- #define SH7751_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
- #define SH7751_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
- #define SH7751_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
- #define SH7751_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
- #define SH7751_PCICLR_TGT 0x04000000 /* Target Transfer Error */
- #define SH7751_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
-#define SH7751_PCIAINT 0x130 /* Arbiter Interrupt Register */
- #define SH7751_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
- #define SH7751_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH7751_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
- #define SH7751_PCIAINT_TABT 0x00000008 /* Target Abort */
- #define SH7751_PCIAINT_MABT 0x00000004 /* Master Abort */
- #define SH7751_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
- #define SH7751_PCIAINT_WDPE 0x00000002 /* Write Data Parity Error */
-#define SH7751_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH7751_PCIBMLR 0x138 /* Error Bus Master Register */
- #define SH7751_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
- #define SH7751_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
- #define SH7751_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
- #define SH7751_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
- #define SH7751_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
-#define SH7751_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
- #define SH7751_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
-#define SH7751_PCIDPA0 0x180 /* DMA0 Transfer Addr. Register */
-#define SH7751_PCIDLA0 0x184 /* DMA0 Local Addr. Register */
-#define SH7751_PCIDTC0 0x188 /* DMA0 Transfer Cnt. Register */
-#define SH7751_PCIDCR0 0x18C /* DMA0 Control Register */
- #define SH7751_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
- #define SH7751_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
- #define SH7751_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
- #define SH7751_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
- #define SH7751_PCIDCR_LHLD 0x00000020 /* Local Address Control */
- #define SH7751_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
- #define SH7751_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
- #define SH7751_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
- #define SH7751_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
- #define SH7751_PCIDCR_STRT 0x00000001 /* DMA Start */
-#define SH7751_PCIDPA1 0x190 /* DMA1 Transfer Addr. Register */
-#define SH7751_PCIDLA1 0x194 /* DMA1 Local Addr. Register */
-#define SH7751_PCIDTC1 0x198 /* DMA1 Transfer Cnt. Register */
-#define SH7751_PCIDCR1 0x19C /* DMA1 Control Register */
-#define SH7751_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. Register */
-#define SH7751_PCIDLA2 0x1A4 /* DMA2 Local Addr. Register */
-#define SH7751_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. Register */
-#define SH7751_PCIDCR2 0x1AC /* DMA2 Control Register */
-#define SH7751_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. Register */
-#define SH7751_PCIDLA3 0x1B4 /* DMA3 Local Addr. Register */
-#define SH7751_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. Register */
-#define SH7751_PCIDCR3 0x1BC /* DMA3 Control Register */
-#define SH7751_PCIPAR 0x1C0 /* PIO Address Register */
- #define SH7751_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
- #define SH7751_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
- #define SH7751_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
- #define SH7751_PCIPAR_REGAD 0x000000FC /* Register Address Number */
-#define SH7751_PCIMBR 0x1C4 /* Memory Base Address Register */
- #define SH7751_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
- #define SH7751_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
-#define SH7751_PCIIOBR 0x1C8 /* I/O Base Address Register */
- #define SH7751_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
- #define SH7751_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
-#define SH7751_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
- #define SH7751_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
- #define SH7751_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
-#define SH7751_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH7751_PCICLKR 0x1D4 /* Clock Ctrl. Register */
- #define SH7751_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
- #define SH7751_PCICLKR_BCSTP 0x00000002 /* BCLK Clock Stop */
-/* For definitions of BCR, MCR see ... */
-#define SH7751_PCIBCR1 0x1E0 /* Memory BCR1 Register */
-#define SH7751_PCIBCR2 0x1E4 /* Memory BCR2 Register */
-#define SH7751_PCIWCR1 0x1E8 /* Wait Control 1 Register */
-#define SH7751_PCIWCR2 0x1EC /* Wait Control 2 Register */
-#define SH7751_PCIWCR3 0x1F0 /* Wait Control 3 Register */
-#define SH7751_PCIMCR 0x1F4 /* Memory Control Register */
-#define SH7751_PCIBCR3 0x1f8 /* Memory BCR3 Register */
-#define SH7751_PCIPCTR 0x200 /* Port Control Register */
- #define SH7751_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
- #define SH7751_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
- #define SH7751_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
- #define SH7751_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
- #define SH7751_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
- #define SH7751_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
- #define SH7751_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
- #define SH7751_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
- #define SH7751_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
-#define SH7751_PCIPDTR 0x204 /* Port Data Register */
- #define SH7751_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
- #define SH7751_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
- #define SH7751_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
- #define SH7751_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
- #define SH7751_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
- #define SH7751_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
-#define SH7751_PCIPDR 0x220 /* Port IO Data Register */
/* Memory Control Registers */
#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */
@@ -274,30 +127,9 @@
#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-/* General PCI values */
-#define SH7751_PCI_HOST_BRIDGE 0x6
-
-/* Flags */
-#define SH7751_PCIC_NO_RESET 0x0001
-
-/* External functions defined per platform i.e. Big Sur, SE... (these could be routed
- * through the machine vectors... */
-extern int pcibios_init_platform(void);
-extern int pcibios_map_platform_irq(u8 slot, u8 pin);
-
-struct sh7751_pci_address_space {
- unsigned long base;
- unsigned long size;
-};
-
-struct sh7751_pci_address_map {
- struct sh7751_pci_address_space window0;
- struct sh7751_pci_address_space window1;
- unsigned long flags;
-};
+struct sh4_pci_address_map;
/* arch/sh/drivers/pci/pci-sh7751.c */
-extern int sh7751_pcic_init(struct sh7751_pci_address_map *map);
+int sh7751_pcic_init(struct sh4_pci_address_map *map);
#endif /* _PCI_SH7751_H_ */
-
OpenPOWER on IntegriCloud