diff options
Diffstat (limited to 'arch/ppc64')
| -rw-r--r-- | arch/ppc64/Makefile | 2 | ||||
| -rw-r--r-- | arch/ppc64/oprofile/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc64/oprofile/common.c | 145 | ||||
| -rw-r--r-- | arch/ppc64/oprofile/op_model_power4.c | 309 | ||||
| -rw-r--r-- | arch/ppc64/oprofile/op_model_rs64.c | 218 |
5 files changed, 1 insertions, 674 deletions
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 17d2c1eac3b8..a8877881bb48 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -85,7 +85,7 @@ libs-y += arch/ppc64/lib/ core-y += arch/ppc64/kernel/ core-y += arch/ppc64/mm/ core-$(CONFIG_XMON) += arch/ppc64/xmon/ -drivers-$(CONFIG_OPROFILE) += arch/ppc64/oprofile/ +drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ boot := arch/ppc64/boot diff --git a/arch/ppc64/oprofile/Makefile b/arch/ppc64/oprofile/Makefile deleted file mode 100644 index 4bf75b776c5b..000000000000 --- a/arch/ppc64/oprofile/Makefile +++ /dev/null @@ -1 +0,0 @@ -include arch/powerpc/oprofile/Makefile diff --git a/arch/ppc64/oprofile/common.c b/arch/ppc64/oprofile/common.c deleted file mode 100644 index ff9361a07d39..000000000000 --- a/arch/ppc64/oprofile/common.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * - * Based on alpha version. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <asm/ptrace.h> -#include <asm/system.h> -#include <asm/pmc.h> -#include <asm/cputable.h> -#include <asm/oprofile_impl.h> - -static struct op_powerpc_model *model; - -static struct op_counter_config ctr[OP_MAX_COUNTER]; -static struct op_system_config sys; - -static void op_handle_interrupt(struct pt_regs *regs) -{ - model->handle_interrupt(regs, ctr); -} - -static int op_ppc64_setup(void) -{ - int err; - - /* Grab the hardware */ - err = reserve_pmc_hardware(op_handle_interrupt); - if (err) - return err; - - /* Pre-compute the values to stuff in the hardware registers. */ - model->reg_setup(ctr, &sys, model->num_counters); - - /* Configure the registers on all cpus. */ - on_each_cpu(model->cpu_setup, NULL, 0, 1); - - return 0; -} - -static void op_ppc64_shutdown(void) -{ - release_pmc_hardware(); -} - -static void op_ppc64_cpu_start(void *dummy) -{ - model->start(ctr); -} - -static int op_ppc64_start(void) -{ - on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1); - return 0; -} - -static inline void op_ppc64_cpu_stop(void *dummy) -{ - model->stop(); -} - -static void op_ppc64_stop(void) -{ - on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1); -} - -static int op_ppc64_create_files(struct super_block *sb, struct dentry *root) -{ - int i; - - /* - * There is one mmcr0, mmcr1 and mmcra for setting the events for - * all of the counters. - */ - oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0); - oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1); - oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra); - - for (i = 0; i < model->num_counters; ++i) { - struct dentry *dir; - char buf[3]; - - snprintf(buf, sizeof buf, "%d", i); - dir = oprofilefs_mkdir(sb, root, buf); - - oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); - oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); - oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); - /* - * We dont support per counter user/kernel selection, but - * we leave the entries because userspace expects them - */ - oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); - oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); - oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); - } - - oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); - oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); - oprofilefs_create_ulong(sb, root, "backtrace_spinlocks", - &sys.backtrace_spinlocks); - - /* Default to tracing both kernel and user */ - sys.enable_kernel = 1; - sys.enable_user = 1; - - /* Turn on backtracing through spinlocks by default */ - sys.backtrace_spinlocks = 1; - - return 0; -} - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type) - return -ENODEV; - - model = cur_cpu_spec->oprofile_model; - model->num_counters = cur_cpu_spec->num_pmcs; - - ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; - ops->create_files = op_ppc64_create_files; - ops->setup = op_ppc64_setup; - ops->shutdown = op_ppc64_shutdown; - ops->start = op_ppc64_start; - ops->stop = op_ppc64_stop; - - printk(KERN_INFO "oprofile: using %s performance monitoring.\n", - ops->cpu_type); - - return 0; -} - -void oprofile_arch_exit(void) -{ -} diff --git a/arch/ppc64/oprofile/op_model_power4.c b/arch/ppc64/oprofile/op_model_power4.c deleted file mode 100644 index 886449315847..000000000000 --- a/arch/ppc64/oprofile/op_model_power4.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <asm/ptrace.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/systemcfg.h> -#include <asm/rtas.h> -#include <asm/oprofile_impl.h> - -#define dbg(args...) - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int oprofile_running; -static int mmcra_has_sihv; - -/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ -static u32 mmcr0_val; -static u64 mmcr1_val; -static u32 mmcra_val; - -/* - * Since we do not have an NMI, backtracing through spinlocks is - * only a best guess. In light of this, allow it to be disabled at - * runtime. - */ -static int backtrace_spinlocks; - -static void power4_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - /* - * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above. - * However we disable it on all POWER4 until we verify it works - * (I was seeing some strange behaviour last time I tried). - * - * It has been verified to work on POWER5 so we enable it there. - */ - if (cpu_has_feature(CPU_FTR_MMCRA_SIHV)) - mmcra_has_sihv = 1; - - /* - * The performance counter event settings are given in the mmcr0, - * mmcr1 and mmcra values passed from the user in the - * op_system_config structure (sys variable). - */ - mmcr0_val = sys->mmcr0; - mmcr1_val = sys->mmcr1; - mmcra_val = sys->mmcra; - - backtrace_spinlocks = sys->backtrace_spinlocks; - - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - /* setup user and kernel profiling */ - if (sys->enable_kernel) - mmcr0_val &= ~MMCR0_KERNEL_DISABLE; - else - mmcr0_val |= MMCR0_KERNEL_DISABLE; - - if (sys->enable_user) - mmcr0_val &= ~MMCR0_PROBLEM_DISABLE; - else - mmcr0_val |= MMCR0_PROBLEM_DISABLE; -} - -extern void ppc64_enable_pmcs(void); - -static void power4_cpu_setup(void *unused) -{ - unsigned int mmcr0 = mmcr0_val; - unsigned long mmcra = mmcra_val; - - ppc64_enable_pmcs(); - - /* set the freeze bit */ - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; - mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; - mtspr(SPRN_MMCR0, mmcr0); - - mtspr(SPRN_MMCR1, mmcr1_val); - - mmcra |= MMCRA_SAMPLE_ENABLE; - mtspr(SPRN_MMCRA, mmcra); - - dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR0)); - dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR1)); - dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(), - mfspr(SPRN_MMCRA)); -} - -static void power4_start(struct op_counter_config *ctr) -{ - int i; - unsigned int mmcr0; - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { - if (ctr[i].enabled) { - ctr_write(i, reset_value[i]); - } else { - ctr_write(i, 0); - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* - * We must clear the PMAO bit on some (GQ) chips. Just do it - * all the time - */ - mmcr0 &= ~MMCR0_PMAO; - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this excetion, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - oprofile_running = 1; - - dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); -} - -static void power4_stop(void) -{ - unsigned int mmcr0; - - /* freeze counters */ - mmcr0 = mfspr(SPRN_MMCR0); - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - oprofile_running = 0; - - dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - - mb(); -} - -/* Fake functions used by canonicalize_pc */ -static void __attribute_used__ hypervisor_bucket(void) -{ -} - -static void __attribute_used__ rtas_bucket(void) -{ -} - -static void __attribute_used__ kernel_unknown_bucket(void) -{ -} - -static unsigned long check_spinlock_pc(struct pt_regs *regs, - unsigned long profile_pc) -{ - unsigned long pc = instruction_pointer(regs); - - /* - * If both the SIAR (sampled instruction) and the perfmon exception - * occurred in a spinlock region then we account the sample to the - * calling function. This isnt 100% correct, we really need soft - * IRQ disable so we always get the perfmon exception at the - * point at which the SIAR is set. - */ - if (backtrace_spinlocks && in_lock_functions(pc) && - in_lock_functions(profile_pc)) - return regs->link; - else - return profile_pc; -} - -/* - * On GQ and newer the MMCRA stores the HV and PR bits at the time - * the SIAR was sampled. We use that to work out if the SIAR was sampled in - * the hypervisor, our exception vectors or RTAS. - */ -static unsigned long get_pc(struct pt_regs *regs) -{ - unsigned long pc = mfspr(SPRN_SIAR); - unsigned long mmcra; - - /* Cant do much about it */ - if (!mmcra_has_sihv) - return check_spinlock_pc(regs, pc); - - mmcra = mfspr(SPRN_MMCRA); - - /* Were we in the hypervisor? */ - if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && - (mmcra & MMCRA_SIHV)) - /* function descriptor madness */ - return *((unsigned long *)hypervisor_bucket); - - /* We were in userspace, nothing to do */ - if (mmcra & MMCRA_SIPR) - return pc; - -#ifdef CONFIG_PPC_RTAS - /* Were we in RTAS? */ - if (pc >= rtas.base && pc < (rtas.base + rtas.size)) - /* function descriptor madness */ - return *((unsigned long *)rtas_bucket); -#endif - - /* Were we in our exception vectors or SLB real mode miss handler? */ - if (pc < 0x1000000UL) - return (unsigned long)__va(pc); - - /* Not sure where we were */ - if (pc < KERNELBASE) - /* function descriptor madness */ - return *((unsigned long *)kernel_unknown_bucket); - - return check_spinlock_pc(regs, pc); -} - -static int get_kernel(unsigned long pc) -{ - int is_kernel; - - if (!mmcra_has_sihv) { - is_kernel = (pc >= KERNELBASE); - } else { - unsigned long mmcra = mfspr(SPRN_MMCRA); - is_kernel = ((mmcra & MMCRA_SIPR) == 0); - } - - return is_kernel; -} - -static void power4_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned long pc; - int is_kernel; - int val; - int i; - unsigned int mmcr0; - - pc = get_pc(regs); - is_kernel = get_kernel(pc); - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { - val = ctr_read(i); - if (val < 0) { - if (oprofile_running && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); - ctr_write(i, reset_value[i]); - } else { - ctr_write(i, 0); - } - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* reset the perfmon trigger */ - mmcr0 |= MMCR0_PMXE; - - /* - * We must clear the PMAO bit on some (GQ) chips. Just do it - * all the time - */ - mmcr0 &= ~MMCR0_PMAO; - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this exception, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); -} - -struct op_powerpc_model op_model_power4 = { - .reg_setup = power4_reg_setup, - .cpu_setup = power4_cpu_setup, - .start = power4_start, - .stop = power4_stop, - .handle_interrupt = power4_handle_interrupt, -}; diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/ppc64/oprofile/op_model_rs64.c deleted file mode 100644 index e010b85996e8..000000000000 --- a/arch/ppc64/oprofile/op_model_rs64.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <asm/ptrace.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/oprofile_impl.h> - -#define dbg(args...) - -static void ctrl_write(unsigned int i, unsigned int val) -{ - unsigned int tmp = 0; - unsigned long shift = 0, mask = 0; - - dbg("ctrl_write %d %x\n", i, val); - - switch(i) { - case 0: - tmp = mfspr(SPRN_MMCR0); - shift = 6; - mask = 0x7F; - break; - case 1: - tmp = mfspr(SPRN_MMCR0); - shift = 0; - mask = 0x3F; - break; - case 2: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 4; - mask = 0x1F; - break; - case 3: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 9; - mask = 0x1F; - break; - case 4: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 14; - mask = 0x1F; - break; - case 5: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 19; - mask = 0x1F; - break; - case 6: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 24; - mask = 0x1F; - break; - case 7: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 28; - mask = 0xF; - break; - } - - tmp = tmp & ~(mask << shift); - tmp |= val << shift; - - switch(i) { - case 0: - case 1: - mtspr(SPRN_MMCR0, tmp); - break; - default: - mtspr(SPRN_MMCR1, tmp); - } - - dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0), - mfspr(SPRN_MMCR1)); -} - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int num_counters; - -static void rs64_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - num_counters = num_ctrs; - - for (i = 0; i < num_counters; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - /* XXX setup user and kernel profiling */ -} - -static void rs64_cpu_setup(void *unused) -{ - unsigned int mmcr0; - - /* reset MMCR0 and set the freeze bit */ - mmcr0 = MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - /* reset MMCR1, MMCRA */ - mtspr(SPRN_MMCR1, 0); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - mtspr(SPRN_MMCRA, 0); - - mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; - /* Only applies to POWER3, but should be safe on RS64 */ - mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR0)); - dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR1)); -} - -static void rs64_start(struct op_counter_config *ctr) -{ - int i; - unsigned int mmcr0; - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - if (ctr[i].enabled) { - ctr_write(i, reset_value[i]); - ctrl_write(i, ctr[i].event); - } else { - ctr_write(i, 0); - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this excetion, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); -} - -static void rs64_stop(void) -{ - unsigned int mmcr0; - - /* freeze counters */ - mmcr0 = mfspr(SPRN_MMCR0); - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - - mb(); -} - -static void rs64_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned int mmcr0; - int val; - int i; - unsigned long pc = mfspr(SPRN_SIAR); - int is_kernel = (pc >= KERNELBASE); - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - val = ctr_read(i); - if (val < 0) { - if (ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); - ctr_write(i, reset_value[i]); - } else { - ctr_write(i, 0); - } - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* reset the perfmon trigger */ - mmcr0 |= MMCR0_PMXE; - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this exception, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); -} - -struct op_powerpc_model op_model_rs64 = { - .reg_setup = rs64_reg_setup, - .cpu_setup = rs64_cpu_setup, - .start = rs64_start, - .stop = rs64_stop, - .handle_interrupt = rs64_handle_interrupt, -}; |
